[4615] | 1 | #!/bin/bash |
---|
[4935] | 2 | # This script sets up and launches a (series of) simulation(s). |
---|
| 3 | # RECOMMENDATION: use main.sh to drive it (do not run it directly) |
---|
[4615] | 4 | |
---|
[4935] | 5 | set -eu |
---|
[4615] | 6 | |
---|
| 7 | # EXPERT-LEVEL CHOICES, only available in setup.sh, not in main.sh : |
---|
[4935] | 8 | #################################################################### |
---|
| 9 | function define_expert_options { |
---|
[4991] | 10 | # optim: either "" or "-debug" to compile in debug mode (slower but better diagnosis of segfaults) |
---|
| 11 | optim="" |
---|
[4615] | 12 | |
---|
[4991] | 13 | # "n" or "y". If testmode="y", then simulations run for a single day per period. |
---|
| 14 | # NOTE: you must set mthend accordingly ! |
---|
| 15 | testmode="n" |
---|
[4615] | 16 | |
---|
[4991] | 17 | # Radiative code: "oldrad" / "rrtm" / "ecrad" |
---|
[4935] | 18 | rad="rrtm" |
---|
[4615] | 19 | |
---|
[4991] | 20 | # !!! STRONG recommendation : experiments with DIFFERENT Orchidee or aerosol options should be performed in DIFFERENT LMDZ_Setup folders |
---|
| 21 | # !!! (especially as they may need different initial files) |
---|
| 22 | |
---|
| 23 | # AEROSOLS : "n" (=no) / "clim" (=average 1995-2014) / "spla" (interactive dust and sea salt) |
---|
[4935] | 24 | # (WARNING : if you first run the scripts with aerosols=n, then you want to change to =clim , |
---|
| 25 | # you'll need to remove the INIT and LIMIT folders that have been created, then run main.sh with init=1 |
---|
| 26 | # in order to re-run the initialisation job, which downloads the aerosol files and interpolates them) |
---|
| 27 | aerosols="clim" |
---|
[4615] | 28 | |
---|
[4935] | 29 | # SURFACE/VEGETATION SCHEME |
---|
[4993] | 30 | # - "none" (bucket scheme) / "CMIP6" (orchidee version used in CMIP exercise) / "7983" (orch2.2) / "7994" (trunk) |
---|
| 31 | # If you need other orch versions, and also require XIOS, you'll need to create the appropriate files in DEF/XMLfilesOR... |
---|
[4935] | 32 | veget="CMIP6" |
---|
[4986] | 33 | |
---|
[4991] | 34 | # New snow scheme INLANDSIS! "y" / "n" |
---|
| 35 | # This flag activates INLANDSIS compilation; not yet done : treatment of specific restart and def file |
---|
[4935] | 36 | inlandsis="n" |
---|
[4615] | 37 | |
---|
[4991] | 38 | # netcdf: 0 (use existing library) / 1 (recompile netcdf, slow) |
---|
| 39 | netcdf=0 |
---|
| 40 | |
---|
[4935] | 41 | # --->>> ALSO PAY ATTENTION TO OUTPUT files, frequency, level ------------- |
---|
| 42 | # With IOIPSL : Choose your config.def among the versions available in DEF, |
---|
| 43 | # copy it as config.def (the copy is done automatically for "iso"), |
---|
| 44 | # edit it and set up output files, frequencies and levels. |
---|
| 45 | # NB : For aerosols=spla, output level minimum 4 is required to output the specific variables. |
---|
| 46 | # For aerosols=n, the corresponding flags will automatically be set to "n". |
---|
| 47 | # With XIOS : adjust DEF/XMLfiles*/file*xml |
---|
| 48 | } |
---|
[4615] | 49 | |
---|
[4935] | 50 | # /!\ DO NOT EDIT BELOW UNLESS YOU KNOW WHAT YOU ARE DOING /!\ |
---|
[4615] | 51 | |
---|
[4991] | 52 | function enable_platform { # In job scripts, sed platform-specific headers |
---|
[4955] | 53 | local file="$1" |
---|
| 54 | local platform |
---|
| 55 | |
---|
| 56 | case ${hostname:0:5} in |
---|
| 57 | jean-) platform="JZ";; |
---|
[4978] | 58 | spiri) platform="SP";; |
---|
| 59 | adast) platform="ADS";; |
---|
[4955] | 60 | *) echo "Warning: $hostname is not a known job platform (ignore if running locally)"; return 0;; |
---|
| 61 | esac |
---|
| 62 | |
---|
| 63 | sed -i'' -e "s/^#@$platform//" "$file" |
---|
| 64 | } |
---|
| 65 | |
---|
[4935] | 66 | function load_install_lib { |
---|
[4954] | 67 | # Fetch and source install_lmdz.sh to get `myget` |
---|
[4940] | 68 | if [[ ! -f "install_lmdz.sh" ]]; then |
---|
[4935] | 69 | wget "http://svn.lmd.jussieu.fr/LMDZ/BOL/script_install_amaury/install_lmdz.sh" # TODO change to normal branch once ready |
---|
| 70 | fi |
---|
[4940] | 71 | # shellcheck disable=SC1090 |
---|
| 72 | source <(sed 's/function \(.*\) {/function installlmdz_\1 {/g' install_lmdz.sh) # source with a namespace for functions |
---|
| 73 | function myget { installlmdz_myget "$@"; } |
---|
[4935] | 74 | } |
---|
[4615] | 75 | |
---|
[4935] | 76 | function set_default_params { |
---|
| 77 | # Default value of script parameters |
---|
| 78 | SIM=$(basename "$local")CTL # name |
---|
| 79 | phylmd="lmd" #option -p $phylmd for makelmdz |
---|
[4615] | 80 | |
---|
[4935] | 81 | cosp="n" # COSP |
---|
| 82 | xios="n" #XIOS |
---|
[4615] | 83 | |
---|
[4935] | 84 | # Nudging : |
---|
| 85 | ok_guide="n" |
---|
| 86 | # With nudging, use real calendar (climato=0) and monthly integrations |
---|
| 87 | climato=1 |
---|
| 88 | freq="mo" # frequence mensuelle mo ou annuelle yr |
---|
[4615] | 89 | |
---|
[4935] | 90 | # NB : the run stops in the BEGINNING of mthend (test "next=stopsim") |
---|
| 91 | mthini=200001 |
---|
| 92 | mthend=200501 |
---|
| 93 | resol="144x142x79" |
---|
[4615] | 94 | |
---|
[4935] | 95 | version="20230412.trunk" |
---|
| 96 | svn="" |
---|
[4615] | 97 | |
---|
[4935] | 98 | init=1 |
---|
[4615] | 99 | |
---|
[4935] | 100 | LIMIT="LIMIT" |
---|
[4954] | 101 | |
---|
| 102 | case $rad in |
---|
| 103 | oldrad) iflag_rrtm=0; NSW=2;; |
---|
| 104 | rrtm) iflag_rrtm=1; NSW=6;; |
---|
| 105 | ecrad) iflag_rrtm=2; NSW=6;; |
---|
| 106 | esac |
---|
[4935] | 107 | } |
---|
[4615] | 108 | |
---|
[4935] | 109 | function read_cmdline_args { |
---|
| 110 | while (($# > 0)); do |
---|
| 111 | case $1 in |
---|
| 112 | "-h") cat <<........fin |
---|
| 113 | setup.sh can be launched/driven by main.sh; some options can only be specified in setup.sh (ex: veget, aerosols). |
---|
| 114 | setup.sh [-v version] [-r svn_release] [-init INIT] [-d 96x95x79] [-f mo] [-nudging] |
---|
[4954] | 115 | -v "version" like 20150828.trunk; see https://lmdz.lmd.jussieu.fr/Distrib/LISMOI.trunk (default <$version>) |
---|
| 116 | -r "svn_release" either the svn release number or "last" (default <$svn>) |
---|
[4935] | 117 | -d IMxJMxLM to run in resolution IM x JM x LM (default <$resol>) |
---|
| 118 | -install pour installer et compiler le modele |
---|
| 119 | -f mo/yr pour tourner en mensuel ou annuel (default <$freq>) |
---|
| 120 | "INIT" 1: creates INIT and LIMIT |
---|
| 121 | 0: reads from INIT and LIMIT |
---|
| 122 | SIMU: reads from preexisting simulation SIMU and LIMIT (default <$init>) |
---|
| 123 | -nudging to run with nudging. Nudging files must be created independently |
---|
| 124 | -p the physics to use (default <$phylmd>) |
---|
| 125 | -name install folder name (default <$SIM>) |
---|
| 126 | Other options available (see "options" section in the script) |
---|
| 127 | ........fin |
---|
| 128 | exit;; |
---|
| 129 | "-v") version="$2"; shift; shift;; |
---|
| 130 | "-r") svn=$2; shift; shift;; |
---|
| 131 | "-d") resol=$2; shift; shift;; |
---|
| 132 | "-f") freq=$2; shift; shift;; |
---|
| 133 | "-p") phylmd=$2; shift; shift;; |
---|
| 134 | "-name") SIM=$2; shift; shift;; |
---|
| 135 | "-cosp") cosp=y; shift;; |
---|
| 136 | "-xios") xios=y; shift;; |
---|
| 137 | "-init") init=$2; shift; shift;; |
---|
| 138 | "-nudging") ok_guide=y; shift;; |
---|
| 139 | "-climato") climato=$2; shift; shift;; |
---|
| 140 | "-mthini") mthini=$2; shift; shift;; |
---|
| 141 | "-mthend") mthend=$2; shift; shift;; |
---|
[4954] | 142 | *) echo "unexpected $1"; $0 -h; exit |
---|
[4935] | 143 | esac |
---|
| 144 | done |
---|
[4615] | 145 | |
---|
[4935] | 146 | # Initialisation |
---|
| 147 | if [[ $init = 1 || $init = 0 ]]; then |
---|
| 148 | INIT="INIT" |
---|
| 149 | else |
---|
| 150 | INIT=$init |
---|
| 151 | fi |
---|
[4615] | 152 | |
---|
[4935] | 153 | yearini=$(echo "$mthini" | cut -c-4) |
---|
| 154 | if [[ $freq = yr ]]; then stopsim=$(echo "$mthend" | cut -c-4); else stopsim=$mthend; fi |
---|
[4615] | 155 | |
---|
[4935] | 156 | if [[ -d $SIM ]]; then |
---|
| 157 | echo "La simulation $SIM existe deja. Il est conseillé d'arrêter et de vérifier." |
---|
| 158 | echo "Si vous êtes sûr de vous, vous pouvez la prolonger. Voulez vous la prolonger ? (y/n)" |
---|
| 159 | read -r ans |
---|
| 160 | if [[ $ans != y ]]; then exit 1; fi |
---|
| 161 | fi |
---|
[4986] | 162 | |
---|
| 163 | ###################################################################### |
---|
| 164 | # Choix du nombre de processeurs |
---|
| 165 | # NOTES : |
---|
| 166 | # omp=8 by default (for Jean-Zay must be a divisor of 40 procs/node), but we need |
---|
| 167 | # omp=1 for SPLA (only MPI parallelisation) |
---|
| 168 | # omp=2 for veget=CMIP6 beacause of a bug in ORCHIDEE/src_xml/xios_orchidee.f90 |
---|
| 169 | ###################################################################### |
---|
| 170 | jm=$(echo "$resol" | cut -dx -f2) |
---|
| 171 | (( mpi = ( jm + 1 ) / 2 )) |
---|
| 172 | omp=8 |
---|
| 173 | if [[ $aerosols = "spla" ]]; then omp=1; fi |
---|
| 174 | if [[ $veget = "CMIP6" && $xios = "y" ]]; then omp=2; fi |
---|
| 175 | if [[ $mpi -gt $NB_MPI_MAX ]]; then mpi=$NB_MPI_MAX; fi |
---|
| 176 | if [[ $omp -gt $NB_OMP_MAX ]]; then omp=$NB_OMP_MAX; fi |
---|
[4935] | 177 | } |
---|
[4615] | 178 | |
---|
[4935] | 179 | function ensure_correct_option_combinations { |
---|
| 180 | # AVOID COMBINATIONS OF OPTIONS THAT DON'T WORK in user choices |
---|
| 181 | if [[ $ok_guide = y && $climato = 1 ]]; then |
---|
[4953] | 182 | echo "STOP: Running nudged simulations with climatological SSTs is not planned. Change <climato> to <0> or modify the setup (experts)"; exit 1 |
---|
[4935] | 183 | fi |
---|
[4615] | 184 | |
---|
[4991] | 185 | if [[ $climato = 0 && $freq = "yr" ]]; then |
---|
[4953] | 186 | echo "STOP: Running simulations with interannual SSTs is possible only month by month and a true calendar." |
---|
[4935] | 187 | echo "Change <climato> to <1> or <freq> to <mo> or modify setup.sh (experts)"; exit 1 |
---|
| 188 | fi |
---|
[4953] | 189 | |
---|
| 190 | |
---|
| 191 | # (Temporary) Constraints for aerosols=spla : |
---|
| 192 | # --> resolution 128x88x79 and rad=rrtm |
---|
[4980] | 193 | if [[ $aerosols = "spla" && $resol != "128x88x79" ]]; then |
---|
[4953] | 194 | echo 'STOP: For now, <aerosols=spla> requires <resol=128x88x79>, and uses the zoomed grid from gcm.def_zNAfrica_BiJe, for which forcing & initial files are available' |
---|
| 195 | echo "Right now resol=<$resol>" |
---|
| 196 | exit 1 |
---|
| 197 | fi |
---|
[4993] | 198 | |
---|
| 199 | if [[ $rad = "ecrad" && $phylmd != "lmd" ]]; then |
---|
| 200 | echo "<rad=ecrad> is only supported for <phy=phylmd> here" # (Amaury) I added this check because we fetch ecrad data from libf/phylmd/ecrad/data only. |
---|
| 201 | fi |
---|
[4940] | 202 | } |
---|
[4615] | 203 | |
---|
[4940] | 204 | function install_model { |
---|
| 205 | mkdir -p "$LMDZD" |
---|
[4615] | 206 | |
---|
[4953] | 207 | local ins_xios ins_cosp ins_aero ins_inlandsis |
---|
| 208 | if [[ $xios = "y" ]]; then ins_xios="-xios"; else ins_xios=""; fi |
---|
| 209 | if [[ $cosp = "y" ]]; then ins_cosp="-cosp v1"; else ins_cosp=""; fi |
---|
| 210 | if [[ $aerosols = "spla" ]]; then ins_aero="-spla"; else ins_aero=""; fi |
---|
| 211 | if [[ $inlandsis = "y" ]]; then ins_inlandsis="-inlandsis"; else ins_inlandsis=""; fi |
---|
| 212 | if [[ -n $svn ]]; then svnopt="-r $svn"; else svnopt=""; fi |
---|
| 213 | |
---|
[4940] | 214 | version_name=LMDZ$(echo "$version" | sed -e 's/-v//g' -e 's/-unstable//' -e 's/-r/r/' -e 's/ //g') |
---|
| 215 | LMDZname="${version_name}${svn}OR$veget${ins_xios}" |
---|
| 216 | MODEL="$LMDZD/$LMDZname/modipsl/modeles/LMDZ" |
---|
[4615] | 217 | |
---|
[4953] | 218 | if [[ -d $MODEL ]]; then echo "Found existing install at MODEL=$MODEL"; fi |
---|
| 219 | echo "Installing model" |
---|
| 220 | cd "$LMDZD" |
---|
| 221 | cp "$local/install_lmdz.sh" . |
---|
| 222 | chmod +x install_lmdz.sh |
---|
[4993] | 223 | local make_j=8 |
---|
| 224 | echo "./install_lmdz.sh -noclean $optim -v $version $svnopt -d $resol -rad $rad -bench 0 -parallel mpi_omp $ins_cosp $ins_xios $ins_aero $ins_inlandsis -name $LMDZname -veget $veget -netcdf $netcdf -arch $ARCH -make_j $make_j" >> install_lmdz_options.$$.sh |
---|
[4953] | 225 | chmod +x install_lmdz_options.$$.sh |
---|
| 226 | echo "Running install_lmdz_options.$$.sh" |
---|
[4978] | 227 | set -o pipefail |
---|
[4995] | 228 | # We launch using $RUNCMD, except if it's using mpirun (no srun equivalent for bash script) => if supported, the compilation runs in a cluster job |
---|
| 229 | local install_cmd="$RUNCMD $make_j" |
---|
| 230 | if [[ $(echo "$RUNCMD" | cut -c -6) = "mpirun" ]]; then |
---|
| 231 | install_cmd="" |
---|
| 232 | fi |
---|
| 233 | gcm=$MODEL/$($install_cmd ./install_lmdz_options.$$.sh | tee /dev/tty | tail -n 1 | sed -n "s:.* executable is \(.*\.e\).*:\1:p") |
---|
| 234 | # gcm=$MODEL/$(./install_lmdz_options.$$.sh | tee /dev/tty | tail -n 1 | sed -n "s:.* executable is \(.*\.e\).*:\1:p") |
---|
[4978] | 235 | set +o pipefail |
---|
[4953] | 236 | mv install_lmdz.sh install_lmdz.$$.sh |
---|
[4954] | 237 | cd "$local" |
---|
[4935] | 238 | } |
---|
[4615] | 239 | |
---|
[4955] | 240 | function setup_def { # modify various .def in ./DEF (+ xios xml as needed) |
---|
[4954] | 241 | cd "$local" |
---|
[4615] | 242 | |
---|
[4954] | 243 | # Utilisation des .def_iso pour LMDZ-ISOtopes |
---|
| 244 | if [[ $phylmd = "lmdiso" ]]; then |
---|
| 245 | for file_iso in $(ls DEF | grep _iso); do |
---|
| 246 | cp DEF/"$file_iso" DEF/"${file_iso%%_iso}" |
---|
| 247 | done |
---|
| 248 | fi |
---|
[4615] | 249 | |
---|
[4954] | 250 | ###################################################################### |
---|
| 251 | # Choix de la grille verticale |
---|
| 252 | ###################################################################### |
---|
| 253 | lm=$(echo "$resol" | cut -dx -f3) |
---|
| 254 | if [ ! -f "DEF/L$lm.def" ]; then |
---|
| 255 | echo "STOP: Résolution verticale non prévue - créer un fichier DEF/L$lm.def"; exit 1 |
---|
| 256 | else |
---|
| 257 | sed -i'' -e "s/INCLUDEDEF=L.*.def/INCLUDEDEF=L$lm.def/" DEF/run.def |
---|
| 258 | fi |
---|
[4615] | 259 | |
---|
[4954] | 260 | ###################################################################### |
---|
| 261 | # Changements dans les fichiers DEF/*def |
---|
[4955] | 262 | # (ils vont se repercuter dans les repertoires de simulation $local/$SIM et de run $SIMRUNDIR) |
---|
[4954] | 263 | ###################################################################### |
---|
[4615] | 264 | |
---|
[4954] | 265 | # Choix du fichier traceur.def coherent avec l'option "aerosols" |
---|
| 266 | # NOTE : Le nouveau tracer.def_nospla par defaut n'inclut pas Rn-Pb; |
---|
| 267 | # si on les veut, il faut utiliser ci-dessous; a la place, tracer_RN_PB.def |
---|
| 268 | #--------------------------------------------------------------------- |
---|
| 269 | # NB: Si on change de traceur.def (entre spla et nospla), il faut refaire l'etape "initialisation" (ce0l)? |
---|
| 270 | # Normalement les traceurs absents de start* files sont initialises=0 dans le code; verifier pour spla ! |
---|
| 271 | if [[ $aerosols = "spla" ]]; then |
---|
| 272 | # ancien traceur pour l instant |
---|
| 273 | cp DEF/traceur.def_spla DEF/traceur.def |
---|
| 274 | elif [[ $phylmd = "lmdiso" ]]; then |
---|
| 275 | # nouveau traceur , déjà copié si 'y' |
---|
| 276 | cp DEF/tracer.def_nospla DEF/tracer.def |
---|
| 277 | fi |
---|
[4615] | 278 | |
---|
[4954] | 279 | # TEMPORAIREMENT pour spla on force l'utilisation de gcm.def_zNAfrica_BiJe (avec resolution 128x88x79) |
---|
| 280 | #---------------------------------------------------------------------- |
---|
[4980] | 281 | if [[ $aerosols = "spla" ]]; then cp DEF/gcm.def_zNAfrica_BiJe DEF/gcm.def; fi |
---|
[4615] | 282 | |
---|
[4954] | 283 | # Inscription du choix ok_guide dans DEF/guide.def |
---|
| 284 | #--------------------------------------------------------------------- |
---|
| 285 | sed -i'' -e 's/ok_guide=.*.$/ok_guide='$ok_guide'/' DEF/guide.def |
---|
[4615] | 286 | |
---|
[4954] | 287 | # Inscription du type de calendrier (qui est fonction de $climato) dans DEF/run.def |
---|
| 288 | #--------------------------------------------------------------------- |
---|
| 289 | # NB Contrairement a ce qui est ecrit dans les fichiers run.def standard, |
---|
| 290 | # dans ce tutorial le choix earth_365d n'est pas disponible, et earth_366d s'appelle gregorian |
---|
| 291 | if [[ $climato = 0 ]]; then calend="gregorian"; else calend="earth_360d"; fi |
---|
| 292 | sed -i'' -e 's/calend=.*.$/calend='$calend'/' DEF/run.def |
---|
[4615] | 293 | |
---|
[4954] | 294 | # Changements dans config.def (pre-choisi, et regle pour output si utilisation avec IOIPSL) |
---|
| 295 | # cf options veget, aerosols, cosp, xios |
---|
| 296 | #--------------------------------------------------------------------- |
---|
[4980] | 297 | if [[ $veget = "none" ]]; then VEGET="n"; else VEGET="y"; fi |
---|
[4954] | 298 | sed -i'' -e 's/VEGET=.*.$/VEGET='$VEGET'/' DEF/config.def |
---|
[4953] | 299 | |
---|
[4954] | 300 | if [[ $aerosols = "n" ]]; then |
---|
| 301 | # set flag_aerosols=0 and flags ok_ade&co=n |
---|
| 302 | sed -i'' -e 's/^ok_cdnc=.*.$/ok_cdnc=n/' -e 's/^ok_ade=.*.$/ok_ade=n/' -e 's/^ok_aie=.*.$/ok_aie=n/' -e 's/^ok_alw=.*.$/ok_alw=n/' -e 's/^flag_aerosol=.*.$/flag_aerosol=0/' DEF/config.def |
---|
| 303 | fi |
---|
[4953] | 304 | |
---|
[4954] | 305 | # COSP : ok_cosp desactive COSP si on a compile avec; il ne l'active pas si on a compile sans |
---|
| 306 | sed -i'' -e 's/ok_cosp.*.$/ok_cosp='$cosp'/' DEF/config.def |
---|
| 307 | if [[ $cosp = "y" ]]; then \cp -f "$MODEL"/DefLists/cosp*.txt "$local"/DEF/; fi |
---|
[4615] | 308 | |
---|
[4954] | 309 | # Sorties LMDZ en fonction de l'option "xios" |
---|
| 310 | sed -i'' -e 's/ok_all_xml=.*.$/ok_all_xml='$xios'/' DEF/config.def |
---|
[4615] | 311 | |
---|
[4954] | 312 | # Ajuster physiq.def en fonction de radiative code (default: values for rad=rrtm) |
---|
| 313 | # Pour isotopes=y , mettre iflag_ice_thermo=0 au lieu de 1 |
---|
| 314 | #--------------------------------------------------------------------- |
---|
| 315 | sed -i'' -e 's/iflag_rrtm=.*.$/iflag_rrtm='"$iflag_rrtm"'/' -e 's/NSW=.*.$/NSW='"$NSW"'/' DEF/physiq.def |
---|
[4995] | 316 | sed -i"" -e "s:directory_name.*$:directory_name=\"$MODEL/libf/phylmd/ecrad/data\",:" DEF/namelist_ecrad |
---|
[4615] | 317 | |
---|
[4954] | 318 | if [[ $phylmd = "lmdiso" ]]; then iflag_ice_thermo=0; else iflag_ice_thermo=1; fi |
---|
| 319 | sed -i -e 's/iflag_ice_thermo=.*.$/iflag_ice_thermo='$iflag_ice_thermo'/' DEF/physiq.def |
---|
[4615] | 320 | |
---|
[4954] | 321 | # Choix de orchidee.def en fonction de orchidee_rev; modification pour xios |
---|
| 322 | # NOTE separate orchidee_pft.def file for ORCHIDEE trunk post-CMIP6 |
---|
| 323 | #--------------------------------------------------------------------- |
---|
| 324 | orchidee_def=orchidee.def_6.1 |
---|
| 325 | orchidee_pft_def="" |
---|
| 326 | if [[ $veget = "7983" ]]; then |
---|
| 327 | orchidee_def=orchidee.def_6.2work |
---|
| 328 | elif [[ $veget = "7994" ]]; then |
---|
| 329 | orchidee_def=orchidee.def_6.4work |
---|
| 330 | orchidee_pft_def=orchidee_pft.def_6.4work |
---|
| 331 | if ! grep "INCLUDEDEF=orchidee_pft.def" DEF/run.def; then |
---|
| 332 | sed -i'' -e 's/INCLUDEDEF=orchidee.def/INCLUDEDEF=orchidee.def\nINCLUDEDEF=orchidee_pft.def/' DEF/run.def; fi |
---|
| 333 | fi |
---|
| 334 | cp -f DEF/$orchidee_def DEF/orchidee.def |
---|
| 335 | if [[ $orchidee_pft_def != "" ]]; then cp -f DEF/$orchidee_pft_def DEF/orchidee_pft.def; fi |
---|
[4615] | 336 | |
---|
[4954] | 337 | # Only for veget=CMIP6 it is still possible to use IOIPSL; newer versions of orchidee.def have XIOS_ORCHIDEE_OK = y |
---|
| 338 | sed -i'' -e 's/XIOS_ORCHIDEE_OK =.*.$/XIOS_ORCHIDEE_OK = '$xios'/' DEF/orchidee.def |
---|
[4615] | 339 | |
---|
[4954] | 340 | ###################################################################### |
---|
| 341 | # Si on tourne avec XIOS, mise a jour des fichiers context et field* dans XMLfilesLMDZ |
---|
[4955] | 342 | # (ils vont se repercuter dans les repertoires de simulation $local/$SIM et de run $SIMRUNDIR) |
---|
[4954] | 343 | ###################################################################### |
---|
| 344 | if [[ $xios = y ]]; then |
---|
| 345 | cp -f "$MODEL"/DefLists/context_lmdz.xml "$local"/DEF/XMLfilesLMDZ/. |
---|
| 346 | cp -f "$MODEL"/DefLists/field_def_lmdz.xml "$local"/DEF/XMLfilesLMDZ/. |
---|
| 347 | if [[ $cosp = y ]]; then cp -f "$MODEL"/DefLists/field_def_cosp1.xml "$local"/DEF/XMLfilesLMDZ/.; fi |
---|
| 348 | fi |
---|
| 349 | } |
---|
[4615] | 350 | |
---|
[4955] | 351 | function setup_ce0l { # Verification de l'existance de l'état initial, compilation eventuelle pour sa creation |
---|
[4954] | 352 | if [[ ! -d $INIT ]]; then |
---|
| 353 | if [[ $init = 0 ]]; then |
---|
| 354 | echo "STOP: Récuperer les repertoires $INIT ou lancer avec option -init"; exit 1 |
---|
| 355 | else |
---|
| 356 | # Compile ce0l |
---|
| 357 | cd "$MODEL" |
---|
| 358 | sed -e 's/gcm$/ce0l/' compile.sh > compile_ce0l.sh; chmod +x compile_ce0l.sh |
---|
| 359 | echo "Compiling ce0l" |
---|
| 360 | if ! ./compile_ce0l.sh &> ce0l.log; then echo "STOP: ce0l compilation failed, see $MODEL/ce0l.log"; exit 1; fi |
---|
| 361 | echo "Compiled ce0l" |
---|
[4955] | 362 | ce0l=${gcm/gcm/ce0l} |
---|
[4615] | 363 | |
---|
[4954] | 364 | cd "$local" |
---|
| 365 | fi |
---|
| 366 | elif [[ $init = 1 ]]; then |
---|
| 367 | echo "STOP: Vous essayez d initialiser le modele mais $INIT existe deja"; exit 1 |
---|
| 368 | fi |
---|
| 369 | } |
---|
[4615] | 370 | |
---|
[4955] | 371 | function setup_simu { |
---|
[4956] | 372 | SIMRUNTOPDIR="$SIMRUNBASEDIR/$(basename "$local")" |
---|
[4955] | 373 | SIMRUNDIR=$SIMRUNTOPDIR |
---|
| 374 | mkdir -p "$SIMRUNDIR" |
---|
| 375 | cd "$SIMRUNDIR" |
---|
| 376 | echo "La simulation s'exécutera sur $SIMRUNDIR" |
---|
[4615] | 377 | |
---|
[4955] | 378 | ##################################################################### |
---|
| 379 | # Creation du repertoire $SIM s'il n'existe pas deja |
---|
| 380 | ##################################################################### |
---|
| 381 | if [[ ! -d $local/$SIM ]]; then |
---|
| 382 | mkdir "$local/$SIM" |
---|
| 383 | cd "$local" |
---|
[4615] | 384 | |
---|
[4955] | 385 | # Edit reb.sh |
---|
| 386 | cp reb.sh "$local/$SIM/reb.sh"; chmod +x "$local/$SIM/reb.sh" |
---|
[4958] | 387 | sed -i'' -e "s:^rebuild=.*.$:rebuild=$LMDZD/$LMDZname/modipsl/bin/rebuild:" "$local/$SIM/reb.sh" |
---|
[4991] | 388 | enable_platform "$local/$SIM/reb.sh" |
---|
[4615] | 389 | |
---|
[4955] | 390 | # Copy .def |
---|
| 391 | cp lmdz_env.sh "$local/$SIM/" |
---|
| 392 | mkdir "$local/$SIM/DEF"; cp DEF/*def DEF/namelis* "$local/$SIM/DEF/" |
---|
| 393 | #Pour XIOS, respectivement COSP, copier aussi les fichiers *xml / *txt |
---|
| 394 | if [[ $cosp = "y" ]]; then cp DEF/cosp*txt "$local/$SIM/DEF/"; fi |
---|
| 395 | if [[ $xios = "y" ]]; then |
---|
| 396 | cp DEF/XMLfilesLMDZ/*xml "$local/$SIM/DEF/" |
---|
| 397 | if [[ $veget != 'none' ]]; then cp DEF/XMLfilesOR$veget/*xml "$local/$SIM/DEF/"; fi |
---|
| 398 | fi |
---|
| 399 | chmod u+w "$local/$SIM"/DEF/* |
---|
[4615] | 400 | |
---|
[4955] | 401 | # Gestion du calendrier |
---|
| 402 | ####################### |
---|
| 403 | cd "$SIM" |
---|
| 404 | sed -i'' -e "s/anneeref=.*.$/anneeref=$yearini/" DEF/run.def |
---|
| 405 | if [[ $freq = "yr" ]]; then date=$yearini; else date=$mthini; fi |
---|
| 406 | echo "$date a faire" >| etat |
---|
[4615] | 407 | |
---|
[4955] | 408 | # Recuperation des fichiers : executable initiaux et forcages |
---|
| 409 | ############################################################# |
---|
| 410 | echo "date: $date" |
---|
| 411 | for f in start startphy; do |
---|
| 412 | inf=../$INIT/$f.$date.nc |
---|
| 413 | if [[ -f $inf || $init = 1 ]]; then ln -s "$inf" ./; else echo "STOP: $inf missing"; exit ; fi; |
---|
| 414 | done |
---|
| 415 | for f in sechiba stomate; do |
---|
| 416 | if [[ -f ../$INIT/start_$f.$date.nc ]]; then ln -sf "../$INIT/start_$f.$date.nc" .; fi |
---|
| 417 | done |
---|
| 418 | cp "$gcm" gcm.e |
---|
| 419 | fi |
---|
| 420 | cd "$local"/.. |
---|
[4615] | 421 | |
---|
[4955] | 422 | ##################################################################### |
---|
| 423 | echo "Modification du script de lancement" |
---|
| 424 | ##################################################################### |
---|
| 425 | local cput |
---|
| 426 | if [[ $freq = "yr" ]]; then cput="04:00:00"; else cput="01:00:00"; fi |
---|
| 427 | local isotopes="n" |
---|
| 428 | if [[ $phylmd = "lmdiso" ]]; then isotopes="y"; fi |
---|
[4958] | 429 | sed -e "s/NOM_SIMU/$SIM/" \ |
---|
[4955] | 430 | -e "s/time=.*.$/time=$cput/" \ |
---|
| 431 | -e "s/ntasks=.*.$/ntasks=$mpi/" \ |
---|
| 432 | -e "s/cpus-per-task=.*.$/cpus-per-task=$omp/" \ |
---|
| 433 | -e "s/nthreads=.*./nthreads=$omp/" \ |
---|
[4956] | 434 | -e "s/MAINDIR=.*.$/MAINDIR=$(basename "$local")/" \ |
---|
| 435 | -e "s:STORED=.*.*:STORED=$(dirname $local):" \ |
---|
| 436 | -e "s:SCRATCHD=.*.*:SCRATCHD=$SIMRUNBASEDIR:" \ |
---|
[4955] | 437 | -e "s/stopsim=.*.$/stopsim=$stopsim/" \ |
---|
| 438 | -e "s/^veget=.*.$/veget=$veget/" \ |
---|
| 439 | -e "s/^aerosols=.*.$/aerosols=$aerosols/" \ |
---|
| 440 | -e "s/^isotopes=.*.$/isotopes=$isotopes/" \ |
---|
| 441 | -e "s/^climato=.*.$/climato=$climato/" \ |
---|
| 442 | -e "s/^ok_guide=.*.$/ok_guide=$ok_guide/" \ |
---|
| 443 | "$local/script_SIMU" >| "$SIMRUNDIR/tmp_$SIM" |
---|
[4615] | 444 | |
---|
[4991] | 445 | enable_platform "$SIMRUNDIR/tmp_$SIM" |
---|
[4615] | 446 | |
---|
[4955] | 447 | if [[ $testmode = "y" ]]; then |
---|
[4986] | 448 | sed -i'' -e "s/time=.*.$/time=00:10:00/" -e "s/#nday=1/nday=1/" -e "s/#@TESTQ//" "$SIMRUNTOPDIR/tmp_$SIM" |
---|
[4955] | 449 | fi |
---|
| 450 | } |
---|
[4615] | 451 | |
---|
[4955] | 452 | function fetch_simu_init_files { |
---|
| 453 | ##################################################################### |
---|
| 454 | echo "Recuperation eventuelle de certains fichiers sur $LMDZ_INIT" |
---|
| 455 | ##################################################################### |
---|
| 456 | mkdir -p "$LMDZ_INIT" |
---|
[4615] | 457 | |
---|
[4955] | 458 | #------------------------------------------------------------------- |
---|
| 459 | # Fichiers ORCHIDEE |
---|
| 460 | #------------------------------------------------------------------- |
---|
| 461 | get="myget 3DInputData/Orchidee/" |
---|
| 462 | cd "$LMDZ_INIT"; |
---|
| 463 | for file in "PFTmap_IPCC_2000.nc" "cartepente2d_15min.nc" "routing.nc" "routing_simple.nc" "lai2D.nc" "soils_param.nc" "woodharvest_2000.nc" "PFTmap_15PFT.v1_2000.nc"; do |
---|
| 464 | if [[ ! -f $file ]]; then ${get}$file; fi |
---|
| 465 | done |
---|
| 466 | cd - > /dev/null |
---|
| 467 | # Additionnal files needed for ORCHIDEE trunk post-CMIP6 |
---|
| 468 | if [[ $veget = 7994 && ! -f $LMDZ_INIT/soil_bulk_and_ph.nc ]]; then |
---|
| 469 | cd "$LMDZ_INIT" |
---|
| 470 | ${get}soil_bulk_and_ph.nc; ${get}NITROGEN_for_ORtrunk.tar |
---|
| 471 | tar -xvf NITROGEN_for_ORtrunk.tar; cd - > /dev/null |
---|
| 472 | fi |
---|
| 473 | #------------------------------------------------------------------- |
---|
| 474 | # Fichiers aerosols/chimie |
---|
| 475 | #------------------------------------------------------------------- |
---|
| 476 | if [[ $aerosols = "clim" ]]; then |
---|
| 477 | get="myget 3DInputData/AerChem/" |
---|
| 478 | #liste_get="aerosols1850_from_inca.nc aerosols2000_from_inca.nc" |
---|
| 479 | #aerosols9999_from_inca.nc est un lien vers aerosols1995_2014_ensavg_from_inca.nc |
---|
| 480 | cd "$LMDZ_INIT" |
---|
| 481 | for file in "aerosols1850_from_inca.nc" "aerosols9999_from_inca.nc"; do |
---|
| 482 | if [[ ! -f $file ]]; then ${get}$file; fi |
---|
| 483 | done |
---|
| 484 | cd - > /dev/null |
---|
| 485 | fi |
---|
| 486 | # For SPLA |
---|
| 487 | #------------------- |
---|
| 488 | # Dans ${LMDZ_INIT} on cree folder SPLA_Init et dedans le INITIAL |
---|
| 489 | # Pour l'instant on copie là-dedans de chez Binta les fichiers a la res zoomNaf; |
---|
| 490 | # plus tard on y recupererea des fichiers a haute resolution reguliere depuis http:/LMDZ, |
---|
| 491 | # a regrider ensuite par un script interp_fichiers_spla.sh (comme pour aerosols="clim") |
---|
| 492 | # Les fichiers (regrides, sauf SOILSPEC.data utilise tel quel) seront mis dans $MAINDIR/INPUT_SPLA (equivalent de INPUT_DUST) |
---|
| 493 | if [[ $aerosols = "spla" ]]; then |
---|
| 494 | mkdir -p "${LMDZ_INIT}/SPLA_Init"; mkdir -p "$LMDZ_INIT/SPLA_Init/INITIAL" |
---|
| 495 | get="cp -p /gpfsstore/rech/gzi/rgzi027/ergon/BIBIAERO/INPUTS_DUST/INITIAL/" |
---|
| 496 | liste_get="wth.dat cly.dat donnees_lisa.nc SOILSPEC.data \ |
---|
| 497 | carbon_emissions.nc sulphur_emissions_antro.nc \ |
---|
| 498 | sulphur_emissions_nat.nc sulphur_emissions_volc.nc" |
---|
[4615] | 499 | |
---|
[4955] | 500 | cd "$LMDZ_INIT/SPLA_Init/INITIAL" |
---|
| 501 | for file in $liste_get; do |
---|
| 502 | if [[ ! -f $file ]]; then ${get}$file .; fi |
---|
| 503 | done |
---|
| 504 | cd - > /dev/null |
---|
| 505 | ### |
---|
| 506 | #Cas particulier des fichiers mensuels dust.nc :A DECIDER : |
---|
| 507 | #C'est entre le cas des aerosols.clim= 1 seul fichier, annuel, |
---|
| 508 | # et le cas des vents guidage, pré-interpolés avec era2gcm pour toute la periode, dans MAINDIR/GUIDE. |
---|
| 509 | # On pourrait (a)demander de precalculer dust.nc aussi, dans MAINDIR/INPUT_SPLA - avec un script à adapter de Jeronimo. Rien a mettre dans SPLA_Init alors. |
---|
| 510 | # Ou (b) fournir dans SPLA_Init les 12 mois d'un dust.nc climato (an 2006 pour nous ici) à la res EC, et faire juste le regrid vers MAINDIR/INPUT_SPLA |
---|
| 511 | #ICI pour l'instant je copie les fichiers de chez Binta (repositoire==http...) dans LMDZ_INIT/SPLA_Init, avec test sur mois 01 |
---|
[4615] | 512 | |
---|
[4955] | 513 | if [[ ! -d ${LMDZ_INIT}/SPLA_Init/PERIOD0001 ]]; then |
---|
| 514 | if [[ ${hostname:0:5} != "jean-" ]]; then echo "PERIOD001 (aerosols=spla) IS ONLY AVAILABLE ON JEANZAY FOR NOW, CONTACT SUPPORT"; exit 1; fi |
---|
| 515 | cp -pr /gpfsstore/rech/gzi/rgzi027/ergon/BIBIAERO/INPUTS_DUST/PERIOD* "$LMDZ_INIT/SPLA_Init/."; |
---|
| 516 | fi |
---|
| 517 | #A la fin on doit avoir dans SPLA_Init les fichiers initiaux dans INITIAL plus les repertoires PERIOD00MM contenant dust.nc |
---|
| 518 | #Cela doit se retrouver dans script_SIMU qui les copie dans le repertoire de run sur $SCRATCH |
---|
| 519 | fi |
---|
| 520 | #------------------------------------------------------------------- |
---|
| 521 | # Fichiers Init |
---|
| 522 | #------------------------------------------------------------------- |
---|
| 523 | get="myget 3DInputData/Init/" |
---|
| 524 | liste_get="alb_bg_modisopt_2D_ESA_v2.nc reftemp.nc" |
---|
| 525 | cd "$LMDZ_INIT" |
---|
| 526 | for file in $liste_get; do |
---|
| 527 | if [[ ! -f $LMDZ_INIT/$file ]]; then ${get}$file; fi |
---|
| 528 | done |
---|
| 529 | cd - > /dev/null |
---|
| 530 | } |
---|
[4615] | 531 | |
---|
[4955] | 532 | function run_sim_or_init { |
---|
| 533 | cd "$local" |
---|
[4956] | 534 | |
---|
[4955] | 535 | if [[ $init = 1 ]]; then |
---|
| 536 | ##################################################################### |
---|
| 537 | echo "Creation de l etat initial" |
---|
| 538 | ##################################################################### |
---|
[4615] | 539 | |
---|
[4955] | 540 | # Creation du repertoire INIT et mise en place de liens logiques vers les starts |
---|
| 541 | # en anticipation de leur création : |
---|
| 542 | mkdir "$local/$INIT"; cd "$local/$INIT" |
---|
| 543 | for an in $mthini $yearini; do for f in start startphy; do ln -s "$f.nc" "$f.$an.nc"; done; done |
---|
[4615] | 544 | |
---|
[4955] | 545 | # Creation du repertoire INIT temporaire et rapatriement des fichiers necessaires |
---|
| 546 | if [[ -d $SIMRUNDIR/$INIT ]]; then mv "$SIMRUNDIR/$INIT" "$SIMRUNDIR/$INIT$$"; fi |
---|
| 547 | mkdir "$SIMRUNDIR/$INIT"; cp -r "$local/DEF" "$SIMRUNDIR/$INIT/" |
---|
| 548 | cd "$SIMRUNDIR/$INIT"; cp DEF/*.def .; cp "$local/lmdz_env.sh" . |
---|
| 549 | if [[ $xios = "y" ]]; then |
---|
| 550 | cp DEF/XMLfilesLMDZ/*xml . |
---|
| 551 | if [[ $veget != 'none' ]]; then cp DEF/XMLfilesOR$veget/*xml .; fi |
---|
| 552 | fi |
---|
| 553 | sed -e "s/anneeref=.*.$/anneeref=$yearini/" DEF/run.def >| run.def |
---|
[4954] | 554 | |
---|
[4955] | 555 | #------------------------------------------------------------------- |
---|
| 556 | # Fichiers Limit |
---|
| 557 | #------------------------------------------------------------------- |
---|
| 558 | local yrs suf |
---|
| 559 | if [[ $climato = 0 ]]; then |
---|
| 560 | # calend est choisi plus haut dans "Changements dans les fichiers DEF/*def" et ecrit dans $MAINDIR/DEF/run.def |
---|
| 561 | yrini=$(echo "$mthini" | cut -c-4) |
---|
| 562 | yrend=$(echo "$mthend" | cut -c-4) |
---|
| 563 | yrs=""; yr=$yrini |
---|
| 564 | while [[ $yr -le $yrend ]]; do yrs="$yrs $yr"; (( yr = yr + 1 )); done |
---|
| 565 | suf="360x180_" |
---|
| 566 | else |
---|
| 567 | yrs=2000 |
---|
| 568 | suf="1x1_clim" |
---|
| 569 | fi |
---|
[4954] | 570 | |
---|
[4955] | 571 | get="myget 3DInputData/Limit/" |
---|
| 572 | liste_get="Albedo.nc Relief.nc Rugos.nc landiceref.nc" |
---|
| 573 | for yr in $yrs; do |
---|
| 574 | if [[ $climato = 0 ]]; then sufyr=$suf$yr; else sufyr=$suf; fi |
---|
| 575 | liste_get="$liste_get amipbc_sic_$sufyr.nc amipbc_sst_$sufyr.nc" |
---|
| 576 | done |
---|
| 577 | echo LISTEGET "$liste_get" |
---|
| 578 | for file in $liste_get; do |
---|
| 579 | cd "$LMDZ_INIT" |
---|
| 580 | if [[ ! -f $LMDZ_INIT/$file ]]; then ${get}$file; fi |
---|
| 581 | cd - > /dev/null |
---|
| 582 | ln -s "$LMDZ_INIT/$file" . |
---|
| 583 | done |
---|
| 584 | #------------------------------------------------------------------- |
---|
| 585 | # ECDYN |
---|
| 586 | #------------------------------------------------------------------- |
---|
| 587 | get="myget 3DInputData/Init/" |
---|
| 588 | if [[ ! -f $LMDZ_INIT/ECDYN.nc ]]; then cd "$LMDZ_INIT"; ${get}ECDYN.nc; cd - > /dev/null; fi |
---|
| 589 | ln -s "$LMDZ_INIT"/ECDYN.nc . |
---|
| 590 | ln -sf ECDYN.nc ECPHY.nc |
---|
[4615] | 591 | |
---|
[4955] | 592 | # Creation du script d'initialisation |
---|
| 593 | cat << ...eod >| tmp |
---|
| 594 | #!/bin/bash |
---|
| 595 | #@JZ#JeanZay |
---|
| 596 | #@JZ#SBATCH --job-name=Init # nom du job |
---|
[4978] | 597 | #@JZ#SBATCH --ntasks=1 # Nombre de processus MPI |
---|
[4980] | 598 | #@JZ#SBATCH --cpus-per-task=1 # nombre de threads OpenMP |
---|
[4955] | 599 | #@JZ# /!\ Attention, la ligne suivante est trompeuse mais dans le vocabulaire |
---|
[4978] | 600 | #@JZ# de Slurm "multithread" fait bien référence à l'hyperthreading. |
---|
| 601 | #@JZ#SBATCH --hint=nomultithread # 1 thread par coeur physique (pas d'hyperthreading) |
---|
| 602 | #@JZ#SBATCH --time=00:10:00 # Temps d'exécution maximum demandé (HH:MM:SS) |
---|
[4955] | 603 | #@JZ#SBATCH --output=Init%j.out # Nom du fichier de sortie |
---|
| 604 | #@JZ#SBATCH --error=Init%j.out # Nom du fichier d'erreur (ici commun avec la sortie) |
---|
| 605 | #@JZ# To submit to dev queue; "time" (above) must be max 2h |
---|
[4995] | 606 | #@JZ#TESTQ#SBATCH --qos=qos_cpu-dev |
---|
[4978] | 607 | #@SP#Spirit |
---|
| 608 | #@SP#SBATCH --job-name=Init |
---|
| 609 | #@SP#SBATCH --ntasks=1 |
---|
[4980] | 610 | #@SP#SBATCH --cpus-per-task=1 |
---|
[4978] | 611 | #@SP#SBATCH --hint=nomultithread |
---|
| 612 | #@SP#SBATCH --time=00:10:00 |
---|
| 613 | #@SP#SBATCH --output=Init%j.out |
---|
| 614 | #@SP#SBATCH --error=Init%j.out |
---|
| 615 | #@ADS#Adastra |
---|
| 616 | #@ADS#SBATCH --job-name=Init |
---|
| 617 | #@ADS#SBATCH --ntasks=1 |
---|
[4980] | 618 | #@ADS#SBATCH --cpus-per-task=1 |
---|
[4995] | 619 | #@ADS#SBATCH --ntasks-per-node=8 # TODO check how to scale this |
---|
[4978] | 620 | #@ADS#SBATCH --hint=nomultithread |
---|
| 621 | #@ADS#SBATCH --time=00:10:00 |
---|
| 622 | #@ADS#SBATCH --output=Init%j.out |
---|
| 623 | #@ADS#SBATCH --error=Init%j.out |
---|
[4615] | 624 | |
---|
[4995] | 625 | set -eu |
---|
| 626 | |
---|
[4955] | 627 | # ANCIEN MULTI STEP case \${LOADL_STEP_NAME} in |
---|
[4615] | 628 | |
---|
[4955] | 629 | # ANCIEN MULTI STEP init ) |
---|
[4615] | 630 | |
---|
[4955] | 631 | if [ ! -f lmdz_env.sh ]; then echo "manque fichier lmdz_env.sh"; ls; exit 1; fi |
---|
| 632 | . lmdz_env.sh |
---|
| 633 | ulimit -s unlimited |
---|
| 634 | cd $SIMRUNDIR/$INIT |
---|
| 635 | echo "Executable : $ce0l" |
---|
| 636 | for yr in $yrs; do |
---|
| 637 | if [ $climato = 0 ]; then sufyr=$suf\$yr; else sufyr=$suf; fi |
---|
| 638 | ln -sf amipbc_sic_\$sufyr.nc amipbc_sic_1x1.nc |
---|
| 639 | ln -sf amipbc_sst_\$sufyr.nc amipbc_sst_1x1.nc |
---|
| 640 | sed -e 's/anneeref=.*.$/anneeref='\$yr'/' DEF/run.def >| run.def |
---|
| 641 | echo Starting initialisation |
---|
[4991] | 642 | OMP_NUM_THREADS=1 $RUNCMD 1 $ce0l # ce0l requires MPI=OMP=1 |
---|
[4955] | 643 | if [ $climato = 0 ]; then mv limit.nc limit.\$yr.nc; fi |
---|
| 644 | done |
---|
| 645 | # ANCIEN MULTI STEP ;; |
---|
[4615] | 646 | |
---|
[4955] | 647 | # ANCIEN MULTI STEP interp ) |
---|
[4956] | 648 | if [[ $aerosols = clim ]]; then |
---|
| 649 | cp $local/interp_aerosols.sh .; chmod +x interp_aerosols.sh |
---|
| 650 | # Les aerosols de l'annee 2000 ont été remplacés par "9999" qui pointe vers un fichier moyen sur 1995-2014 |
---|
| 651 | #for year in 2000 1850; do ./interp_aerosols.sh \$year; done |
---|
| 652 | #mv aerosols.2000.nc aerosols.clim.nc; mv aerosols.1850.nc aerosols.nat.nc |
---|
| 653 | for year in 9999 1850; do ./interp_aerosols.sh \$year; done |
---|
| 654 | mv aerosols.9999.nc aerosols.clim.nc; mv aerosols.1850.nc aerosols.nat.nc |
---|
[4615] | 655 | fi |
---|
| 656 | |
---|
[4955] | 657 | # AS : S'il etait possible d'automatiser l'interpolation de l'input SPLA, ce serait a lancer ici |
---|
| 658 | #en attendant, on passe au paragraphe suivant où on copie les fichiers à la res ZoomNaf depuis $LMDZ_INIT/SPLA_Init |
---|
| 659 | #if [ $aerosols = spla ]; then |
---|
| 660 | #cp $local/futur script interp_aerosols_SPLA.sh .; chmod +x interp_aerosols_SPLA.sh |
---|
| 661 | #for file in...; do ./interp_aerosols_SPLA.sh \$year; done |
---|
| 662 | #etc etc etc ... |
---|
| 663 | #fi |
---|
[4615] | 664 | |
---|
[4955] | 665 | # Copy initial and forcing files in $local/$INIT and $local/$LIMIT; also in $local/INPUT_SPLA if $aerosols=spla |
---|
[4991] | 666 | for f in sta* gri*nc; do cp \$f $local/$INIT/\$f; done |
---|
| 667 | if [[ $climato = 1 ]]; then cp limit.nc $local/$INIT/limit.nc; fi |
---|
[4955] | 668 | mkdir -p $local/$LIMIT |
---|
| 669 | for f in limit*.nc ; do cp \$f $local/$LIMIT/\$f; done |
---|
| 670 | if [ $aerosols = clim ]; then for f in aerosols[.0-9]*nc; do cp \$f $local/$LIMIT/\$f; done; fi |
---|
| 671 | # |
---|
| 672 | if [ $aerosols = spla ]; then |
---|
| 673 | #mkdir -p $local/INPUT_SPLA; pour l'instant on copie $LMDZ_INIT/SPLA_Init en block |
---|
| 674 | if [ ! -d $local/INPUT_SPLA ]; then cp -pr $LMDZ_INIT/SPLA_Init $local/INPUT_SPLA; fi |
---|
[4615] | 675 | fi |
---|
[4955] | 676 | cd $SIMRUNDIR |
---|
| 677 | ...eod |
---|
| 678 | if [[ $ok_guide != "y" ]]; then # Running first simulation automatically except for nudging |
---|
| 679 | cat << ...eod >> tmp |
---|
| 680 | $SUBMITCMD tmp_$SIM |
---|
| 681 | ...eod |
---|
| 682 | fi |
---|
| 683 | cat << ...eod >> tmp |
---|
| 684 | # ANCIEN MULTI STEP esac |
---|
| 685 | ...eod |
---|
[4991] | 686 | enable_platform tmp |
---|
[4955] | 687 | echo "###############################################################################" |
---|
| 688 | echo "Submitting initialisation job <$SUBMITCMD tmp> from $(pwd)" |
---|
| 689 | chmod +x tmp |
---|
| 690 | $SUBMITCMD tmp |
---|
| 691 | echo "###############################################################################" |
---|
[4615] | 692 | |
---|
[4955] | 693 | else #case [ $init != 1 ] |
---|
| 694 | cd "$SIMRUNDIR" |
---|
| 695 | echo "###############################################################################" |
---|
| 696 | echo "Submitting job tmp_$SIM" |
---|
| 697 | echo "$SUBMITCMD tmp_$SIM" |
---|
| 698 | $SUBMITCMD "tmp_$SIM" |
---|
| 699 | echo '###############################################################################' |
---|
| 700 | fi |
---|
| 701 | } |
---|
[4615] | 702 | |
---|
[4991] | 703 | function message_post_submit { |
---|
| 704 | if [[ $ok_guide = "y" && $init = 1 ]]; then |
---|
[4993] | 705 | enable_platform era2gcm_tuto.sh |
---|
[4991] | 706 | echo "Once initialisation is finished, you have to create nudging files" |
---|
[4993] | 707 | echo "Edit era2gcm_tuto.sh and set the desired parameters in section <User choices>" |
---|
| 708 | echo "Make sure you have acces to the chosen ERA files, and the required modules are loaded, then run : ./era2gcm_tuto.sh" |
---|
[4991] | 709 | if [[ $aerosols = "spla" ]]; then |
---|
| 710 | echo "Your aerosol choice is <spla>, so you need ERA 10m-winds interpolated on LMDZ grid. Use script era2gcm_uv10m.sh" |
---|
| 711 | fi |
---|
| 712 | else |
---|
| 713 | echo "Si tout se passe bien, vous avez initialisé et lancé automatiquement la simulation." |
---|
[4993] | 714 | echo "Le job qui a été lancé se trouve sur $SIMRUNTOPDIR/tmp_$SIM" |
---|
[4991] | 715 | fi |
---|
| 716 | } |
---|
| 717 | |
---|
[4955] | 718 | # Set up the appropriate environment |
---|
| 719 | source lmdz_env.sh |
---|
[4615] | 720 | |
---|
[4955] | 721 | local=$(pwd) |
---|
[4615] | 722 | |
---|
[4955] | 723 | load_install_lib |
---|
| 724 | define_expert_options |
---|
| 725 | set_default_params |
---|
| 726 | read_cmdline_args "$@" |
---|
| 727 | ensure_correct_option_combinations |
---|
| 728 | install_model |
---|
| 729 | setup_def |
---|
| 730 | setup_ce0l |
---|
| 731 | setup_simu |
---|
| 732 | fetch_simu_init_files |
---|
| 733 | run_sim_or_init |
---|
[4993] | 734 | message_post_submit |
---|