Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

mediation_nest_move.F @ 3567

Last change on this file since 3567 was 2759, checked in by aslmd, 2 years ago
adding unmodified code from WRFV3.0.1.1, expurged from useless data +1M size
File size: 34.1 KB

Line
1
2	SUBROUTINE med_nest_move ( parent, nest )
3	! Driver layer
4	USE module_domain
5	USE module_timing
6	USE module_configure
7	USE module_io_domain
8	USE module_dm
9	TYPE(domain) , POINTER :: parent, nest, grid
10	INTEGER dx, dy ! number of parent domain points to move
11	#ifdef MOVE_NESTS
12	! Local
13	CHARACTER*256 mess
14	INTEGER i, j, p, parent_grid_ratio
15	INTEGER px, py ! number and direction of nd points to move
16	INTEGER :: ids , ide , jds , jde , kds , kde , &
17	ims , ime , jms , jme , kms , kme , &
18	ips , ipe , jps , jpe , kps , kpe
19	INTEGER ierr, fid
20	LOGICAL input_from_hires
21	LOGICAL saved_restart_value
22	TYPE (grid_config_rec_type) :: config_flags
23	LOGICAL, EXTERNAL :: wrf_dm_on_monitor
24	LOGICAL, EXTERNAL :: should_not_move
25
26	INTERFACE
27	SUBROUTINE med_interp_domain ( parent , nest )
28	USE module_domain
29	TYPE(domain) , POINTER :: parent , nest
30	END SUBROUTINE med_interp_domain
31	SUBROUTINE start_domain ( grid , allowed_to_move )
32	USE module_domain
33	TYPE(domain) :: grid
34	LOGICAL, INTENT(IN) :: allowed_to_move
35	END SUBROUTINE start_domain
36	#if ( EM_CORE == 1 )
37	SUBROUTINE shift_domain_em ( grid, disp_x, disp_y &
38	!
39	# include <dummy_new_args.inc>
40	!
41	)
42	USE module_domain
43	USE module_configure
44	USE module_timing
45	IMPLICIT NONE
46	INTEGER disp_x, disp_y
47	TYPE(domain) , POINTER :: grid
48	# include <dummy_new_decl.inc>
49	END SUBROUTINE shift_domain_em
50	#endif
51	#if ( NMM_CORE == 1 )
52	#endif
53	LOGICAL FUNCTION time_for_move ( parent , nest , dx , dy )
54	USE module_domain
55	USE module_utility
56	TYPE(domain) , POINTER :: parent , nest
57	INTEGER, INTENT(OUT) :: dx , dy
58	END FUNCTION time_for_move
59	SUBROUTINE input_terrain_rsmas ( grid , &
60	ids , ide , jds , jde , kds , kde , &
61	ims , ime , jms , jme , kms , kme , &
62	ips , ipe , jps , jpe , kps , kpe )
63	USE module_domain
64	TYPE ( domain ) :: grid
65	INTEGER :: ids , ide , jds , jde , kds , kde , &
66	ims , ime , jms , jme , kms , kme , &
67	ips , ipe , jps , jpe , kps , kpe
68	END SUBROUTINE input_terrain_rsmas
69	SUBROUTINE med_nest_feedback ( parent , nest , config_flags )
70	USE module_domain
71	USE module_configure
72	TYPE (domain), POINTER :: nest , parent
73	TYPE (grid_config_rec_type) config_flags
74	END SUBROUTINE med_nest_feedback
75	SUBROUTINE blend_terrain ( ter_interpolated , ter_input , &
76	ids , ide , jds , jde , kds , kde , &
77	ims , ime , jms , jme , kms , kme , &
78	ips , ipe , jps , jpe , kps , kpe )
79	INTEGER :: ids , ide , jds , jde , kds , kde , &
80	ims , ime , jms , jme , kms , kme , &
81	ips , ipe , jps , jpe , kps , kpe
82	REAL , DIMENSION(ims:ime,jms:jme) :: ter_interpolated
83	REAL , DIMENSION(ims:ime,jms:jme) :: ter_input
84	END SUBROUTINE blend_terrain
85	SUBROUTINE store_terrain ( ter_interpolated , ter_input , &
86	ids , ide , jds , jde , kds , kde , &
87	ims , ime , jms , jme , kms , kme , &
88	ips , ipe , jps , jpe , kps , kpe )
89	INTEGER :: ids , ide , jds , jde , kds , kde , &
90	ims , ime , jms , jme , kms , kme , &
91	ips , ipe , jps , jpe , kps , kpe
92	REAL , DIMENSION(ims:ime,jms:jme) :: ter_interpolated
93	REAL , DIMENSION(ims:ime,jms:jme) :: ter_input
94	END SUBROUTINE store_terrain
95	END INTERFACE
96
97	! set grid pointer for code in deref_kludge (if used)
98	grid => nest
99
100	IF ( should_not_move( nest%id ) ) THEN
101	CALL wrf_message( 'Nest movement is disabled because of namelist settings' )
102	RETURN
103	ENDIF
104
105	! if the nest has stopped don't do all this
106	IF ( WRFU_ClockIsStopTime(nest%domain_clock ,rc=ierr) ) RETURN
107
108	! mask should be defined in nest domain
109
110	check_for_move: IF ( time_for_move ( parent , nest , dx, dy ) ) THEN
111
112	IF ( (dx .gt. 1 .or. dx .lt. -1 ) .or. &
113	(dy .gt. 1 .or. dy .lt. -1 ) ) THEN
114	WRITE(mess,*)' invalid move: dx, dy ', dx, dy
115	CALL wrf_error_fatal( mess )
116	ENDIF
117
118	WRITE(mess,*)' moving ',grid%id,dx,dy
119	CALL wrf_message(mess)
120
121	CALL get_ijk_from_grid ( grid , &
122	ids, ide, jds, jde, kds, kde, &
123	ims, ime, jms, jme, kms, kme, &
124	ips, ipe, jps, jpe, kps, kpe )
125
126	CALL wrf_dm_move_nest ( parent, nest%intermediate_grid, dx, dy )
127
128	CALL adjust_domain_dims_for_move( nest%intermediate_grid , dx, dy )
129
130	CALL get_ijk_from_grid ( grid , &
131	ids, ide, jds, jde, kds, kde, &
132	ims, ime, jms, jme, kms, kme, &
133	ips, ipe, jps, jpe, kps, kpe )
134
135	grid => nest
136
137	#if ( EM_CORE == 1 )
138	CALL shift_domain_em( grid, dx, dy &
139	!
140	# include <actual_new_args.inc>
141	!
142	)
143	#endif
144
145	px = grid%parent_grid_ratio*dx
146	py = grid%parent_grid_ratio*dy
147
148	grid%i_parent_start = grid%i_parent_start + px / grid%parent_grid_ratio
149	CALL nl_set_i_parent_start( grid%id, grid%i_parent_start )
150	grid%j_parent_start = grid%j_parent_start + py / grid%parent_grid_ratio
151	CALL nl_set_j_parent_start( grid%id, grid%j_parent_start )
152
153	IF ( wrf_dm_on_monitor() ) THEN
154	write(mess,*) &
155	'Grid ',grid%id,' New SW corner (in parent x and y):',grid%i_parent_start, grid%j_parent_start
156	CALL wrf_message(TRIM(mess))
157	ENDIF
158
159	CALL med_interp_domain( parent, nest )
160
161	CALL nl_get_input_from_hires( nest%id , input_from_hires )
162	IF ( input_from_hires ) THEN
163
164	! store horizontally interpolated terrain in temp location
165	CALL store_terrain ( nest%ht_fine , nest%ht , &
166	ids , ide , jds , jde , 1 , 1 , &
167	ims , ime , jms , jme , 1 , 1 , &
168	ips , ipe , jps , jpe , 1 , 1 )
169	CALL store_terrain ( nest%mub_fine , nest%mub , &
170	ids , ide , jds , jde , 1 , 1 , &
171	ims , ime , jms , jme , 1 , 1 , &
172	ips , ipe , jps , jpe , 1 , 1 )
173	CALL store_terrain ( nest%phb_fine , nest%phb , &
174	ids , ide , jds , jde , kds , kde , &
175	ims , ime , jms , jme , kms , kme , &
176	ips , ipe , jps , jpe , kps , kpe )
177
178	CALL input_terrain_rsmas ( nest, &
179	ids , ide , jds , jde , 1 , 1 , &
180	ims , ime , jms , jme , 1 , 1 , &
181	ips , ipe , jps , jpe , 1 , 1 )
182
183	CALL blend_terrain ( nest%ht_fine , nest%ht , &
184	ids , ide , jds , jde , 1 , 1 , &
185	ims , ime , jms , jme , 1 , 1 , &
186	ips , ipe , jps , jpe , 1 , 1 )
187	CALL blend_terrain ( nest%mub_fine , nest%mub , &
188	ids , ide , jds , jde , 1 , 1 , &
189	ims , ime , jms , jme , 1 , 1 , &
190	ips , ipe , jps , jpe , 1 , 1 )
191	CALL blend_terrain ( nest%phb_fine , nest%phb , &
192	ids , ide , jds , jde , kds , kde , &
193	ims , ime , jms , jme , kms , kme , &
194	ips , ipe , jps , jpe , kps , kpe )
195	!
196	CALL model_to_grid_config_rec ( parent%id , model_config_rec , config_flags )
197
198	CALL med_nest_feedback ( parent , nest , config_flags )
199	parent%imask_nostag = 1
200	parent%imask_xstag = 1
201	parent%imask_ystag = 1
202	parent%imask_xystag = 1
203
204	! start_domain will key off "restart". Even if this is a restart run
205	! we don't want it to here. Save the value, set it to false, and restore afterwards
206	saved_restart_value = config_flags%restart
207	config_flags%restart = .FALSE.
208	grid%restart = .FALSE.
209	CALL nl_set_restart ( 1, .FALSE. )
210	grid%press_adj = .FALSE.
211	CALL start_domain ( parent , .FALSE. )
212	config_flags%restart = saved_restart_value
213	grid%restart = saved_restart_value
214	CALL nl_set_restart ( 1, saved_restart_value )
215
216	ENDIF
217
218	!
219	! masks associated with nest will have been set by shift_domain_em above
220	nest%moved = .true.
221	! start_domain will key off "restart". Even if this is a restart run
222	! we don't want it to here. Save the value, set it to false, and restore afterwards
223	saved_restart_value = config_flags%restart
224	config_flags%restart = .FALSE.
225	CALL nl_set_restart ( 1, .FALSE. )
226	grid%restart = .FALSE.
227	nest%press_adj = .FALSE.
228	CALL start_domain ( nest , .FALSE. )
229	config_flags%restart = saved_restart_value
230	grid%restart = saved_restart_value
231	CALL nl_set_restart ( 1, saved_restart_value )
232	nest%moved = .false.
233
234	!
235	! copy time level 2 to time level 1 in new regions of multi-time level fields
236	! this should be registry generated.
237	!
238	#if ( EM_CORE == 1 )
239	do k = kms,kme
240	where ( nest%imask_xstag .EQ. 1 ) nest%u_1(:,k,:) = nest%u_2(:,k,:)
241	where ( nest%imask_ystag .EQ. 1 ) nest%v_1(:,k,:) = nest%v_2(:,k,:)
242	where ( nest%imask_nostag .EQ. 1 ) nest%t_1(:,k,:) = nest%t_2(:,k,:)
243	where ( nest%imask_nostag .EQ. 1 ) nest%w_1(:,k,:) = nest%w_2(:,k,:)
244	where ( nest%imask_nostag .EQ. 1 ) nest%ph_1(:,k,:) = nest%ph_2(:,k,:)
245	where ( nest%imask_nostag .EQ. 1 ) nest%tp_1(:,k,:) = nest%tp_2(:,k,:)
246	where ( nest%imask_nostag .EQ. 1 ) nest%tke_1(:,k,:) = nest%tke_2(:,k,:)
247	enddo
248	where ( nest%imask_nostag .EQ. 1 ) nest%mu_1(:,:) = nest%mu_2(:,:)
249	#endif
250	!
251	ENDIF check_for_move
252	#endif
253	END SUBROUTINE med_nest_move
254
255	LOGICAL FUNCTION time_for_move2 ( parent , grid , move_cd_x, move_cd_y )
256	! Driver layer
257	USE module_domain
258	USE module_configure
259	USE module_compute_geop
260	USE module_dm
261	USE module_utility
262	IMPLICIT NONE
263	! Arguments
264	TYPE(domain) , POINTER :: parent, grid
265	INTEGER, INTENT(OUT) :: move_cd_x , move_cd_y
266	#ifdef MOVE_NESTS
267	! Local
268	INTEGER num_moves, rc
269	INTEGER move_interval , move_id
270	TYPE(WRFU_Time) :: ct, st
271	TYPE(WRFU_TimeInterval) :: ti
272	CHARACTER*256 mess, timestr
273	INTEGER :: ids, ide, jds, jde, kds, kde, &
274	ims, ime, jms, jme, kms, kme, &
275	ips, ipe, jps, jpe, kps, kpe
276	INTEGER :: is, ie, js, je, ierr
277	REAL :: ipbar, pbar, jpbar, fact
278	REAL :: last_vc_i , last_vc_j
279
280	REAL, ALLOCATABLE, DIMENSION(:,:) :: height_l, height
281	REAL, ALLOCATABLE, DIMENSION(:,:) :: psfc, xlat, xlong, terrain
282	REAL :: minh, maxh
283	INTEGER :: mini, minj, maxi, maxj, i, j, pgr, irad
284	REAL :: disp_x, disp_y, lag, radius, center_i, center_j, dx
285	REAL :: dijsmooth, vmax, vmin, a, b
286	REAL :: dc_i, dc_j ! domain center
287	REAL :: maxws, ws
288	REAL :: pmin
289	INTEGER imploc, jmploc
290
291	INTEGER :: fje, fjs, fie, fis, fimloc, fjmloc, imloc, jmloc
292	INTEGER :: i_parent_start, j_parent_start
293	INTEGER :: max_vortex_speed, vortex_interval ! meters per second and seconds
294	INTEGER :: track_level
295	REAL :: rsmooth = 100000. ! in meters
296
297	LOGICAL, EXTERNAL :: wrf_dm_on_monitor
298
299	character*256 message, message2
300
301	!#define MOVING_DIAGS
302	# ifdef VORTEX_CENTER
303
304
305	CALL nl_get_parent_grid_ratio ( grid%id , pgr )
306	CALL nl_get_i_parent_start ( grid%id , i_parent_start )
307	CALL nl_get_j_parent_start ( grid%id , j_parent_start )
308	CALL nl_get_track_level ( grid%id , track_level )
309
310	! WRITE(mess,*)'Vortex is tracked at ', track_level
311	! CALL wrf_message(mess)
312
313	CALL get_ijk_from_grid ( grid , &
314	ids, ide, jds, jde, kds, kde, &
315	ims, ime, jms, jme, kms, kme, &
316	ips, ipe, jps, jpe, kps, kpe )
317
318	! If the alarm is ringing, recompute the Vortex Center (VC); otherwise
319	! use the previous position of VC. VC is not recomputed ever step to
320	! save on cost for global collection of height field and broadcast
321	! of new center.
322
323	# ifdef MOVING_DIAGS
324	write(0,*)'Check to see if COMPUTE_VORTEX_CENTER_ALARM is ringing? '
325	# endif
326	CALL nl_get_parent_grid_ratio ( grid%id , pgr )
327	CALL nl_get_dx ( grid%id , dx )
328
329	IF ( WRFU_AlarmIsRinging( grid%alarms( COMPUTE_VORTEX_CENTER_ALARM ), rc=rc ) ) THEN
330
331	# ifdef MOVING_DIAGS
332	write(0,*)'COMPUTE_VORTEX_CENTER_ALARM is ringing '
333	# endif
334	CALL WRFU_AlarmRingerOff( grid%alarms( COMPUTE_VORTEX_CENTER_ALARM ), rc=rc )
335	CALL domain_clock_get( grid, current_timestr=timestr )
336
337	last_vc_i = grid%vc_i
338	last_vc_j = grid%vc_j
339
340	ALLOCATE ( height_l ( ims:ime , jms:jme ), STAT=ierr )
341	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating height_l in time_for_move2')
342	IF ( wrf_dm_on_monitor() ) THEN
343	ALLOCATE ( height ( ids:ide , jds:jde ), STAT=ierr )
344	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating height in time_for_move2')
345	ALLOCATE ( psfc ( ids:ide , jds:jde ), STAT=ierr )
346	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating psfc in time_for_move2')
347	ALLOCATE ( xlat ( ids:ide , jds:jde ), STAT=ierr )
348	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating xlat in time_for_move2')
349	ALLOCATE ( xlong ( ids:ide , jds:jde ), STAT=ierr )
350	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating xlong in time_for_move2')
351	ALLOCATE ( terrain ( ids:ide , jds:jde ), STAT=ierr )
352	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating terrain in time_for_move2')
353	ELSE
354	ALLOCATE ( height ( 1:1 , 1:1 ), STAT=ierr )
355	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating height in time_for_move2')
356	ALLOCATE ( psfc ( 1:1 , 1:1 ), STAT=ierr )
357	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating psfc in time_for_move2')
358	ALLOCATE ( xlat ( 1:1 , 1:1 ), STAT=ierr )
359	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating xlat in time_for_move2')
360	ALLOCATE ( xlong ( 1:1 , 1:1 ), STAT=ierr )
361	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating xlong in time_for_move2')
362	ALLOCATE ( terrain ( 1:1 , 1:1 ), STAT=ierr )
363	IF ( ierr .ne. 0 ) CALL wrf_error_fatal ('allocating terrain in time_for_move2')
364	ENDIF
365
366	# if (EM_CORE == 1)
367	CALL compute_500mb_height ( grid%ph_2 , grid%phb, grid%p, grid%pb, height_l , &
368	track_level, &
369	ids, ide, jds, jde, kds, kde, &
370	ims, ime, jms, jme, kms, kme, &
371	ips, ipe, jps, jpe, kps, kpe )
372	# endif
373
374	CALL wrf_patch_to_global_real ( height_l , height , grid%domdesc, "z", "xy", &
375	ids, ide-1 , jds , jde-1 , 1 , 1 , &
376	ims, ime , jms , jme , 1 , 1 , &
377	ips, ipe , jps , jpe , 1 , 1 )
378	CALL wrf_patch_to_global_real ( grid%psfc , psfc , grid%domdesc, "z", "xy", &
379	ids, ide-1 , jds , jde-1 , 1 , 1 , &
380	ims, ime , jms , jme , 1 , 1 , &
381	ips, ipe , jps , jpe , 1 , 1 )
382	CALL wrf_patch_to_global_real ( grid%xlat , xlat , grid%domdesc, "z", "xy", &
383	ids, ide-1 , jds , jde-1 , 1 , 1 , &
384	ims, ime , jms , jme , 1 , 1 , &
385	ips, ipe , jps , jpe , 1 , 1 )
386	CALL wrf_patch_to_global_real ( grid%xlong , xlong , grid%domdesc, "z", "xy", &
387	ids, ide-1 , jds , jde-1 , 1 , 1 , &
388	ims, ime , jms , jme , 1 , 1 , &
389	ips, ipe , jps , jpe , 1 , 1 )
390	CALL wrf_patch_to_global_real ( grid%ht , terrain , grid%domdesc, "z", "xy", &
391	ids, ide-1 , jds , jde-1 , 1 , 1 , &
392	ims, ime , jms , jme , 1 , 1 , &
393	ips, ipe , jps , jpe , 1 , 1 )
394
395	! calculate max wind speed
396	maxws = 0.
397	do j = jps, jpe
398	do i = ips, ipe
399	ws = grid%u10(i,j) * grid%u10(i,j) + grid%v10(i,j) * grid%v10(i,j)
400	if ( ws > maxws ) maxws = ws
401	enddo
402	enddo
403	maxws = sqrt ( maxws )
404	maxws = wrf_dm_max_real ( maxws )
405
406	monitor_only : IF ( wrf_dm_on_monitor() ) THEN
407
408	!
409	! This vortex center finding code adapted from the Hurricane version of MM5,
410	! Courtesy:
411	!
412	! Shuyi Chen et al., Rosenstiel School of Marine and Atmos. Sci., U. Miami.
413	! Spring, 2005
414	!
415	! Get the first guess vortex center about which we do our search
416	! as mini and minh; minimum value is minh
417	!
418
419	CALL nl_get_vortex_interval( grid%id , vortex_interval )
420	CALL nl_get_max_vortex_speed( grid%id , max_vortex_speed )
421
422	IF ( grid%vc_i < 0. .AND. grid%vc_j < 0. ) THEN
423	! first time through
424	is = ids
425	ie = ide-1
426	js = jds
427	je = jde-1
428	ELSE
429	! limit the search to an area around the vortex
430	! that is limited by max_vortex_speed (default 40) meters per second from
431	! previous location over vortex_interval (default 15 mins)
432
433	is = max( grid%vc_i - 60 * vortex_interval * max_vortex_speed / dx , 1.0 * ids )
434	js = max( grid%vc_j - 60 * vortex_interval * max_vortex_speed / dx , 1.0 * jds )
435	ie = min( grid%vc_i + 60 * vortex_interval * max_vortex_speed / dx , 1.0 * (ide-1) )
436	je = min( grid%vc_j + 60 * vortex_interval * max_vortex_speed / dx , 1.0 * (jde-1) )
437
438	ENDIF
439
440	# ifdef MOVING_DIAGS
441	write(0,*)'search set around last position '
442	write(0,*)' is, ids-1, ie, ide-1 ', is, ids-1, ie, ide-1
443	write(0,*)' js, jds-1, je, jde-1 ', js, jds-1, je, jde-1
444	# endif
445
446	imploc = -1
447	jmploc = -1
448
449	! find minimum psfc
450	pmin = 99999999.0 ! make this very large to be sure we find a minumum
451	DO j = js, je
452	DO i = is, ie
453	! adjust approximately to sea level pressure (same as below: ATCF)
454	psfc(i,j)=psfc(i,j)+11.38*terrain(i,j)
455	IF ( psfc(i,j) .LT. pmin ) THEN
456	pmin = psfc(i,j)
457	imploc = i
458	jmploc = j
459	ENDIF
460	ENDDO
461	ENDDO
462
463	IF ( imploc .EQ. -1 .OR. jmploc .EQ. -1 ) THEN ! if we fail to find a min there is something seriously wrong
464	WRITE(mess,*)'i,j,is,ie,js,je,imploc,jmploc ',i,j,is,ie,js,je,imploc,jmploc
465	CALL wrf_message(mess)
466	CALL wrf_error_fatal('time_for_move2: Method failure searching for minimum psfc.')
467	ENDIF
468
469	imloc = -1
470	jmloc = -1
471	maxi = -1
472	maxj = -1
473
474	! find local min, max
475	vmin = 99999999.0
476	vmax = -99999999.0
477	DO j = js, je
478	DO i = is, ie
479	IF ( height(i,j) .LT. vmin ) THEN
480	vmin = height(i,j)
481	imloc = i
482	jmloc = j
483	ENDIF
484	IF ( height(i,j) .GT. vmax ) THEN
485	vmax = height(i,j)
486	maxi = i
487	maxj = j
488	ENDIF
489	ENDDO
490	ENDDO
491
492	IF ( imloc .EQ. -1 .OR. jmloc .EQ. -1 .OR. maxi .EQ. -1 .OR. maxj .EQ. -1 ) THEN
493	WRITE(mess,*)'i,j,is,ie,js,je,imloc,jmloc,maxi,maxj ',i,j,is,ie,js,je,imloc,jmloc,maxi,maxj
494	CALL wrf_message(mess)
495	CALL wrf_error_fatal('time_for_move2: Method failure searching max/min of height.')
496	ENDIF
497
498	fimloc = imloc
499	fjmloc = jmloc
500
501	if ( grid%xi .EQ. -1. ) grid%xi = fimloc
502	if ( grid%xj .EQ. -1. ) grid%xj = fjmloc
503
504	dijsmooth = rsmooth / dx
505
506	fjs = max(fjmloc-dijsmooth,1.0)
507	fje = min(fjmloc+dijsmooth,jde-2.0)
508	fis = max(fimloc-dijsmooth,1.0)
509	fie = min(fimloc+dijsmooth,ide-2.0)
510	js = fjs
511	je = fje
512	is = fis
513	ie = fie
514
515	vmin = 1000000.0
516	vmax = -1000000.0
517	DO j = js, je
518	DO i = is, ie
519	IF ( height(i,j) .GT. vmax ) THEN
520	vmax = height(i,j)
521	ENDIF
522	ENDDO
523	ENDDO
524
525	pbar = 0.0
526	ipbar = 0.0
527	jpbar = 0.0
528
529	do j=js,je
530	do i=is,ie
531	fact = vmax - height(i,j)
532	pbar = pbar + fact
533	ipbar = ipbar + fact*(i-is)
534	jpbar = jpbar + fact*(j-js)
535	enddo
536	enddo
537
538	IF ( pbar .NE. 0. ) THEN
539
540	! Compute an adjusted, smoothed, vortex center location in cross
541	! point index space.
542	! Time average. A is coef for old information; B is new
543	! If pbar is zero then just skip this, leave xi and xj alone,
544	! result will be no movement.
545	a = 0.0
546	b = 1.0
547	grid%xi = (a * grid%xi + b * (is + ipbar / pbar)) / ( a + b )
548	grid%xj = (a * grid%xj + b * (js + jpbar / pbar)) / ( a + b )
549
550	grid%vc_i = grid%xi + .5
551	grid%vc_j = grid%xj + .5
552
553
554	ENDIF
555
556	# ifdef MOVING_DIAGS
557	write(0,*)'computed grid%vc_i, grid%vc_j ',grid%vc_i, grid%vc_j
558	i = grid%vc_i ; j = grid%vc_j ; height( i,j ) = height(i,j) * 1.2 !mark the center
559	CALL domain_clock_get( grid, current_timestr=message2 )
560	WRITE ( message , FMT = '(A," on domain ",I3)' ) TRIM(message2), grid%id
561	# endif
562
563	!
564	i = INT(grid%xi+.5)
565	j = INT(grid%xj+.5)
566	write(mess,'("ATCF"," ",A19," ",f8.2," ",f8.2," ",f6.1," ",f6.1)') &
567	timestr(1:19), &
568	xlat(i,j), &
569	xlong(i,j), &
570	0.01*pmin, &
571	!already computed above 0.01pmin+0.1138terrain(imploc,jmploc), &
572	maxws*1.94
573	CALL wrf_message(TRIM(mess))
574
575
576
577	ENDIF monitor_only
578
579	DEALLOCATE ( psfc )
580	DEALLOCATE ( xlat )
581	DEALLOCATE ( xlong )
582	DEALLOCATE ( terrain )
583	DEALLOCATE ( height )
584	DEALLOCATE ( height_l )
585
586	CALL wrf_dm_bcast_real( grid%vc_i , 1 )
587	CALL wrf_dm_bcast_real( grid%vc_j , 1 )
588
589	CALL wrf_dm_bcast_real( pmin , 1 )
590	CALL wrf_dm_bcast_integer( imploc , 1 )
591	CALL wrf_dm_bcast_integer( jmploc , 1 )
592
593	# ifdef MOVING_DIAGS
594	write(0,*)'after bcast : grid%vc_i, grid%vc_j ',grid%vc_i, grid%vc_j
595	# endif
596
597
598	ENDIF ! COMPUTE_VORTEX_CENTER_ALARM ringing
599
600	# ifdef MOVING_DIAGS
601	write(0,*)'After ENDIF : grid%vc_i, grid%vc_j ',grid%vc_i, grid%vc_j
602	# endif
603
604	dc_i = (ide-ids+1)/2. ! domain center
605	dc_j = (jde-jds+1)/2.
606
607	disp_x = grid%vc_i - dc_i * 1.0
608	disp_y = grid%vc_j - dc_j * 1.0
609
610	#if 0
611	! This appears to be an old, redundant, and perhaps even misnamed parameter.
612	! Remove it from the namelist and Registry and just hard code it to
613	! the default of 6. JM 20050721
614	CALL nl_get_vortex_search_radius( 1, irad )
615	#else
616	irad = 6
617	#endif
618
619	radius = irad
620
621	if ( disp_x .GT. 0 ) disp_x = min( disp_x , radius )
622	if ( disp_y .GT. 0 ) disp_y = min( disp_y , radius )
623
624	if ( disp_x .LT. 0 ) disp_x = max( disp_x , -radius )
625	if ( disp_y .LT. 0 ) disp_y = max( disp_y , -radius )
626
627	move_cd_x = int ( disp_x / pgr )
628	move_cd_y = int ( disp_y / pgr )
629
630	IF ( move_cd_x .GT. 0 ) move_cd_x = min ( move_cd_x , 1 )
631	IF ( move_cd_y .GT. 0 ) move_cd_y = min ( move_cd_y , 1 )
632	IF ( move_cd_x .LT. 0 ) move_cd_x = max ( move_cd_x , -1 )
633	IF ( move_cd_y .LT. 0 ) move_cd_y = max ( move_cd_y , -1 )
634
635	CALL domain_clock_get( grid, current_timestr=timestr )
636
637	WRITE(mess,*)timestr(1:19),' vortex center (in nest x and y): ',grid%vc_i, grid%vc_j
638	CALL wrf_message(TRIM(mess))
639	WRITE(mess,*)timestr(1:19),' grid center (in nest x and y): ', dc_i, dc_j
640	CALL wrf_message(TRIM(mess))
641	WRITE(mess,*)timestr(1:19),' disp : ', disp_x, disp_y
642	CALL wrf_message(TRIM(mess))
643	WRITE(mess,*)timestr(1:19),' move (rel cd) : ',move_cd_x, move_cd_y
644	CALL wrf_message(TRIM(mess))
645
646	grid%vc_i = grid%vc_i - move_cd_x * pgr
647	grid%vc_j = grid%vc_j - move_cd_y * pgr
648
649	# ifdef MOVING_DIAGS
650	write(0,)' changing grid%vc_i, move_cd_x pgr ', grid%vc_i, move_cd_x * pgr, move_cd_x, pgr
651	# endif
652
653	IF ( ( move_cd_x .NE. 0 ) .OR. ( move_cd_y .NE. 0 ) ) THEN
654	time_for_move2 = .TRUE.
655	ELSE
656	time_for_move2 = .FALSE.
657	ENDIF
658
659	# else
660	! from namelist
661	move_cd_x = 0
662	move_cd_y = 0
663	time_for_move2 = .FALSE.
664	CALL domain_clock_get( grid, current_time=ct, start_time=st )
665	CALL nl_get_num_moves( 1, num_moves )
666	IF ( num_moves .GT. max_moves ) THEN
667	WRITE(mess,*)'time_for_moves2: num_moves (',num_moves,') .GT. max_moves (',max_moves,')'
668	CALL wrf_error_fatal( TRIM(mess) )
669	ENDIF
670	DO i = 1, num_moves
671	CALL nl_get_move_id( i, move_id )
672	IF ( move_id .EQ. grid%id ) THEN
673	CALL nl_get_move_interval( i, move_interval )
674	IF ( move_interval .LT. 999999999 ) THEN
675	CALL WRFU_TimeIntervalSet ( ti, M=move_interval, rc=rc )
676	IF ( ct .GE. st + ti ) THEN
677	CALL nl_get_move_cd_x ( i, move_cd_x )
678	CALL nl_get_move_cd_y ( i, move_cd_y )
679	CALL nl_set_move_interval ( i, 999999999 )
680	time_for_move2 = .TRUE.
681	EXIT
682	ENDIF
683	ENDIF
684	ENDIF
685	ENDDO
686	# endif
687	RETURN
688	#else
689	time_for_move2 = .FALSE.
690	#endif
691	END FUNCTION time_for_move2
692
693	LOGICAL FUNCTION time_for_move ( parent , grid , move_cd_x, move_cd_y )
694	USE module_domain
695	USE module_configure
696	USE module_dm
697	USE module_timing
698	USE module_utility
699	IMPLICIT NONE
700	! arguments
701	TYPE(domain) , POINTER :: parent, grid, par, nst
702	INTEGER, INTENT(OUT) :: move_cd_x , move_cd_y
703	#ifdef MOVE_NESTS
704	! local
705	INTEGER :: corral_dist, kid
706	INTEGER :: dw, de, ds, dn, pgr
707	INTEGER :: would_move_x, would_move_y
708	INTEGER :: cids, cide, cjds, cjde, ckds, ckde, &
709	cims, cime, cjms, cjme, ckms, ckme, &
710	cips, cipe, cjps, cjpe, ckps, ckpe, &
711	nids, nide, njds, njde, nkds, nkde, &
712	nims, nime, njms, njme, nkms, nkme, &
713	nips, nipe, njps, njpe, nkps, nkpe
714	! interface
715	INTERFACE
716	LOGICAL FUNCTION time_for_move2 ( parent , nest , dx , dy )
717	USE module_domain
718	USE module_utility
719	TYPE(domain) , POINTER :: parent , nest
720	INTEGER, INTENT(OUT) :: dx , dy
721	END FUNCTION time_for_move2
722	END INTERFACE
723	! executable
724	!
725	! Simplifying assumption: domains in moving nest simulations have only
726	! one parent and only one child.
727
728	IF ( grid%num_nests .GT. 1 ) THEN
729	CALL wrf_error_fatal ( 'domains in moving nest simulations can have only 1 nest' )
730	ENDIF
731	kid = 1
732	!
733	! find out if this is the innermost nest (will not have kids)
734	IF ( grid%num_nests .EQ. 0 ) THEN
735	! code that executes on innermost nest
736	time_for_move = time_for_move2 ( parent , grid , move_cd_x, move_cd_y )
737
738	! Make sure the parent can move before allowing the nest to approach
739	! its boundary
740	par => grid%parents(1)%ptr
741	nst => grid
742
743	would_move_x = move_cd_x
744	would_move_y = move_cd_y
745
746	! top of until loop
747	100 CONTINUE
748	CALL nl_get_corral_dist ( nst%id , corral_dist )
749	CALL get_ijk_from_grid ( nst , &
750	nids, nide, njds, njde, nkds, nkde, &
751	nims, nime, njms, njme, nkms, nkme, &
752	nips, nipe, njps, njpe, nkps, nkpe )
753	CALL get_ijk_from_grid ( par , &
754	cids, cide, cjds, cjde, ckds, ckde, &
755	cims, cime, cjms, cjme, ckms, ckme, &
756	cips, cipe, cjps, cjpe, ckps, ckpe )
757	CALL nl_get_parent_grid_ratio ( nst%id , pgr )
758	! perform measurements...
759	! from western boundary
760	dw = nst%i_parent_start + would_move_x - cids
761	! from southern boundary
762	ds = nst%j_parent_start + would_move_y - cjds
763	! from eastern boundary
764	de = cide - ( nst%i_parent_start + (nide-nids+1)/pgr + would_move_x )
765	! from northern boundary
766	dn = cjde - ( nst%j_parent_start + (njde-njds+1)/pgr + would_move_y )
767
768	! would this generate a move on the parent?
769	would_move_x = 0
770	would_move_y = 0
771	if ( dw .LE. corral_dist ) would_move_x = would_move_x - 1
772	if ( de .LE. corral_dist ) would_move_x = would_move_x + 1
773	if ( ds .LE. corral_dist ) would_move_y = would_move_y - 1
774	if ( dn .LE. corral_dist ) would_move_y = would_move_y + 1
775
776	IF ( par%id .EQ. 1 ) THEN
777	IF ( would_move_x .NE. 0 .AND. move_cd_x .NE. 0 ) THEN
778	CALL wrf_message('MOAD can not move. Cancelling nest move in X')
779	if ( grid%num_nests .eq. 0 ) grid%vc_i = grid%vc_i + move_cd_x * pgr ! cancel effect of move
780	move_cd_x = 0
781	ENDIF
782	IF ( would_move_y .NE. 0 .AND. move_cd_y .NE. 0 ) THEN
783	CALL wrf_message('MOAD can not move. Cancelling nest move in Y')
784	if ( grid%num_nests .eq. 0 ) grid%vc_j = grid%vc_j + move_cd_y * pgr ! cancel effect of move
785	move_cd_y = 0
786	ENDIF
787	ELSE
788	nst => par
789	par => nst%parents(1)%ptr
790	GOTO 100
791	ENDIF
792
793	! bottom of until loop
794	time_for_move = ( move_cd_x .NE. 0 ) .OR. ( move_cd_y .NE. 0 )
795
796	ELSE
797	! code that executes on parent to see if parent needs to move
798	! get closest number of cells we'll allow nest edge to approach parent bdy
799	CALL nl_get_corral_dist ( grid%nests(kid)%ptr%id , corral_dist )
800	! get dims
801	CALL get_ijk_from_grid ( grid%nests(kid)%ptr , &
802	nids, nide, njds, njde, nkds, nkde, &
803	nims, nime, njms, njme, nkms, nkme, &
804	nips, nipe, njps, njpe, nkps, nkpe )
805	CALL get_ijk_from_grid ( grid , &
806	cids, cide, cjds, cjde, ckds, ckde, &
807	cims, cime, cjms, cjme, ckms, ckme, &
808	cips, cipe, cjps, cjpe, ckps, ckpe )
809	CALL nl_get_parent_grid_ratio ( grid%nests(kid)%ptr%id , pgr )
810	! perform measurements...
811	! from western boundary
812	dw = grid%nests(kid)%ptr%i_parent_start - 1
813	! from southern boundary
814	ds = grid%nests(kid)%ptr%j_parent_start - 1
815	! from eastern boundary
816	de = cide - ( grid%nests(kid)%ptr%i_parent_start + (nide-nids+1)/pgr )
817	! from northern boundary
818	dn = cjde - ( grid%nests(kid)%ptr%j_parent_start + (njde-njds+1)/pgr )
819
820	! move this domain (the parent containing the moving nest)
821	! in a direction that reestablishes the distance from
822	! the boundary.
823	move_cd_x = 0
824	move_cd_y = 0
825	if ( dw .LE. corral_dist ) move_cd_x = move_cd_x - 1
826	if ( de .LE. corral_dist ) move_cd_x = move_cd_x + 1
827	if ( ds .LE. corral_dist ) move_cd_y = move_cd_y - 1
828	if ( dn .LE. corral_dist ) move_cd_y = move_cd_y + 1
829
830	time_for_move = ( move_cd_x .NE. 0 ) .OR. ( move_cd_y .NE. 0 )
831
832	IF ( time_for_move ) THEN
833	IF ( grid%id .EQ. 1 ) THEN
834
835	CALL wrf_message( 'DANGER: Nest has moved too close to boundary of outermost domain.' )
836	time_for_move = .FALSE.
837
838	ELSE
839	! need to adjust the intermediate domain of the nest in relation to this
840	! domain since we're moving
841
842	CALL wrf_dm_move_nest ( grid , grid%nests(kid)%ptr%intermediate_grid , -move_cd_xpgr, -move_cd_ypgr )
843	CALL adjust_domain_dims_for_move( grid%nests(kid)%ptr%intermediate_grid , -move_cd_xpgr, -move_cd_ypgr )
844	grid%nests(kid)%ptr%i_parent_start = grid%nests(kid)%ptr%i_parent_start - move_cd_x*pgr
845	CALL nl_set_i_parent_start( grid%nests(kid)%ptr%id, grid%nests(kid)%ptr%i_parent_start )
846	grid%nests(kid)%ptr%j_parent_start = grid%nests(kid)%ptr%j_parent_start - move_cd_y*pgr
847	CALL nl_set_j_parent_start( grid%nests(kid)%ptr%id, grid%nests(kid)%ptr%j_parent_start )
848
849	ENDIF
850	ENDIF
851
852	ENDIF
853
854	RETURN
855	#else
856	time_for_move = .FALSE.
857	#endif
858	END FUNCTION time_for_move
859
860	! Put any tests for non-moving options or conditions in here
861	LOGICAL FUNCTION should_not_move ( id )
862	USE module_state_description
863	USE module_configure
864	IMPLICIT NONE
865	INTEGER, INTENT(IN) :: id
866	! Local
867	LOGICAL retval
868	INTEGER cu_physics, ra_sw_physics, ra_lw_physics, ucmcall, obs_nudge_opt
869
870	retval = .FALSE.
871	! check for GD ensemble cumulus, which can not move
872	CALL nl_get_cu_physics( id , cu_physics )
873	IF ( cu_physics .EQ. GDSCHEME ) THEN
874	CALL wrf_message('Grell cumulus can not be specified with moving nests. Movement disabled.')
875	retval = .TRUE.
876	ENDIF
877	! check for CAM radiation scheme , which can not move
878	CALL nl_get_ra_sw_physics( id , ra_sw_physics )
879	IF ( ra_sw_physics .EQ. CAMSWSCHEME ) THEN
880	CALL wrf_message('CAM SW radiation can not be specified with moving nests. Movement disabled.')
881	retval = .TRUE.
882	ENDIF
883	CALL nl_get_ra_lw_physics( id , ra_lw_physics )
884	IF ( ra_lw_physics .EQ. CAMLWSCHEME ) THEN
885	CALL wrf_message('CAM LW radiation can not be specified with moving nests. Movement disabled.')
886	retval = .TRUE.
887	ENDIF
888	! check for urban canopy Noah LSM, which can not move
889	CALL nl_get_ucmcall( id , ucmcall )
890	IF ( ucmcall .EQ. 1 ) THEN
891	CALL wrf_message('UCM Noah LSM can not be specified with moving nests. Movement disabled.')
892	retval = .TRUE.
893	ENDIF
894	! check for observation nudging, which can not move
895	CALL nl_get_obs_nudge_opt( id , obs_nudge_opt )
896	IF ( obs_nudge_opt .EQ. 1 ) THEN
897	CALL wrf_message('Observation nudging can not be specified with moving nests. Movement disabled.')
898	retval = .TRUE.
899	ENDIF
900	should_not_move = retval
901	END FUNCTION
902

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format