Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

real_em.F @ 3567

Last change on this file since 3567 was 2759, checked in by aslmd, 2 years ago
adding unmodified code from WRFV3.0.1.1, expurged from useless data +1M size
File size: 53.0 KB

Line
1	! Create an initial data set for the WRF model based on real data. This
2	! program is specifically set up for the Eulerian, mass-based coordinate.
3	PROGRAM real_data
4
5	USE module_machine
6	USE module_domain, ONLY : domain, alloc_and_configure_domain, &
7	domain_clock_set, head_grid, program_name, domain_clockprint
8	USE module_initialize_real, ONLY : wrfu_initialize, find_my_parent
9	USE module_initialize_real
10	USE module_io_domain
11	USE module_driver_constants
12	USE module_configure, ONLY : grid_config_rec_type, model_config_rec, &
13	initial_config, get_config_as_buffer, set_config_as_buffer
14	USE module_timing
15	USE module_state_description, ONLY : realonly
16	USE module_symbols_util, ONLY: wrfu_cal_gregorian
17	#ifdef WRF_CHEM
18	USE module_input_chem_data
19	USE module_input_chem_bioemiss
20	USE module_input_chem_emissopt3
21	#endif
22	USE module_utility, ONLY : WRFU_finalize
23
24	IMPLICIT NONE
25
26	#ifdef WRF_CHEM
27	! interface
28	INTERFACE
29	! mediation-supplied
30	SUBROUTINE med_read_wrf_chem_bioemiss ( grid , config_flags)
31	USE module_domain
32	TYPE (domain) grid
33	TYPE (grid_config_rec_type) config_flags
34	END SUBROUTINE med_read_wrf_chem_bioemiss
35	END INTERFACE
36	#endif
37
38	REAL :: time , bdyfrq
39
40	INTEGER :: loop , levels_to_process , debug_level
41
42
43	TYPE(domain) , POINTER :: null_domain
44	TYPE(domain) , POINTER :: grid , another_grid
45	TYPE(domain) , POINTER :: grid_ptr , grid_ptr2
46	TYPE (grid_config_rec_type) :: config_flags
47	INTEGER :: number_at_same_level
48
49	INTEGER :: max_dom, domain_id , grid_id , parent_id , parent_id1 , id
50	INTEGER :: e_we , e_sn , i_parent_start , j_parent_start
51	INTEGER :: idum1, idum2
52	#ifdef DM_PARALLEL
53	INTEGER :: nbytes
54	INTEGER, PARAMETER :: configbuflen = 4* CONFIG_BUF_LEN
55	INTEGER :: configbuf( configbuflen )
56	LOGICAL , EXTERNAL :: wrf_dm_on_monitor
57	#endif
58	LOGICAL found_the_id
59
60	INTEGER :: ids , ide , jds , jde , kds , kde
61	INTEGER :: ims , ime , jms , jme , kms , kme
62	INTEGER :: ips , ipe , jps , jpe , kps , kpe
63	INTEGER :: ijds , ijde , spec_bdy_width
64	INTEGER :: i , j , k , idts, rc
65	INTEGER :: sibling_count , parent_id_hold , dom_loop
66
67	CHARACTER (LEN=80) :: message
68
69	INTEGER :: start_year , start_month , start_day , start_hour , start_minute , start_second
70	INTEGER :: end_year , end_month , end_day , end_hour , end_minute , end_second
71	INTEGER :: interval_seconds , real_data_init_type
72	INTEGER :: time_loop_max , time_loop
73	real::t1,t2
74	INTERFACE
75	SUBROUTINE Setup_Timekeeping( grid )
76	USE module_domain, ONLY : domain
77	TYPE(domain), POINTER :: grid
78	END SUBROUTINE Setup_Timekeeping
79	END INTERFACE
80
81	#include "version_decl"
82
83	! Define the name of this program (program_name defined in module_domain)
84
85	! NOTE: share/input_wrf.F tests first 7 chars of this name to decide
86	! whether to read P_TOP as metadata from the SI (yes, if .eq. REAL_EM)
87
88	program_name = "REAL_EM " // TRIM(release_version) // " PREPROCESSOR"
89
90	#ifdef DM_PARALLEL
91	CALL disable_quilting
92	#endif
93
94	! Initialize the modules used by the WRF system. Many of the CALLs made from the
95	! init_modules routine are NO-OPs. Typical initializations are: the size of a
96	! REAL, setting the file handles to a pre-use value, defining moisture and
97	! chemistry indices, etc.
98
99	CALL wrf_debug ( 100 , 'real_em: calling init_modules ' )
100	CALL init_modules(1) ! Phase 1 returns after MPI_INIT() (if it is called)
101	CALL WRFU_Initialize( defaultCalendar=WRFU_CAL_GREGORIAN, rc=rc )
102	CALL init_modules(2) ! Phase 2 resumes after MPI_INIT() (if it is called)
103
104	! The configuration switches mostly come from the NAMELIST input.
105
106	#ifdef DM_PARALLEL
107	IF ( wrf_dm_on_monitor() ) THEN
108	CALL initial_config
109	END IF
110	CALL get_config_as_buffer( configbuf, configbuflen, nbytes )
111	CALL wrf_dm_bcast_bytes( configbuf, nbytes )
112	CALL set_config_as_buffer( configbuf, configbuflen )
113	CALL wrf_dm_initialize
114	#else
115	CALL initial_config
116	#endif
117
118	CALL nl_get_debug_level ( 1, debug_level )
119	CALL set_wrf_debug_level ( debug_level )
120
121	CALL wrf_message ( program_name )
122
123	! There are variables in the Registry that are only required for the real
124	! program, fields that come from the WPS package. We define the run-time
125	! flag that says to allocate space for these input-from-WPS-only arrays.
126
127	CALL nl_set_use_wps_input ( 1 , REALONLY )
128
129	! Allocate the space for the mother of all domains.
130
131	NULLIFY( null_domain )
132	CALL wrf_debug ( 100 , 'real_em: calling alloc_and_configure_domain ' )
133	CALL alloc_and_configure_domain ( domain_id = 1 , &
134	grid = head_grid , &
135	parent = null_domain , &
136	kid = -1 )
137
138	grid => head_grid
139	CALL nl_get_max_dom ( 1 , max_dom )
140
141	IF ( model_config_rec%interval_seconds .LE. 0 ) THEN
142	CALL wrf_error_fatal( 'namelist value for interval_seconds must be > 0')
143	END IF
144
145	all_domains : DO domain_id = 1 , max_dom
146
147	IF ( ( model_config_rec%input_from_file(domain_id) ) .OR. &
148	( domain_id .EQ. 1 ) ) THEN
149
150	IF ( domain_id .GT. 1 ) THEN
151
152	CALL nl_get_grid_id ( domain_id, grid_id )
153	CALL nl_get_parent_id ( domain_id, parent_id )
154	CALL nl_get_e_we ( domain_id, e_we )
155	CALL nl_get_e_sn ( domain_id, e_sn )
156	CALL nl_get_i_parent_start ( domain_id, i_parent_start )
157	CALL nl_get_j_parent_start ( domain_id, j_parent_start )
158	WRITE (message,FMT='(A,2I3,2I4,2I3)') &
159	'new allocated domain: id, par id, dims i/j, start i/j =', &
160	grid_id, parent_id, e_we, e_sn, i_parent_start, j_parent_start
161
162	CALL wrf_debug ( 100 , message )
163	CALL nl_get_grid_id ( parent_id, grid_id )
164	CALL nl_get_parent_id ( parent_id, parent_id1 )
165	CALL nl_get_e_we ( parent_id, e_we )
166	CALL nl_get_e_sn ( parent_id, e_sn )
167	CALL nl_get_i_parent_start ( parent_id, i_parent_start )
168	CALL nl_get_j_parent_start ( parent_id, j_parent_start )
169	WRITE (message,FMT='(A,2I3,2I4,2I3)') &
170	'parent domain: id, par id, dims i/j, start i/j =', &
171	grid_id, parent_id1, e_we, e_sn, i_parent_start, j_parent_start
172	CALL wrf_debug ( 100 , message )
173
174	CALL nl_get_grid_id ( domain_id, grid_id )
175	CALL nl_get_parent_id ( domain_id, parent_id )
176	CALL nl_get_e_we ( domain_id, e_we )
177	CALL nl_get_e_sn ( domain_id, e_sn )
178	CALL nl_get_i_parent_start ( domain_id, i_parent_start )
179	CALL nl_get_j_parent_start ( domain_id, j_parent_start )
180	grid_ptr2 => head_grid
181	found_the_id = .FALSE.
182	CALL find_my_parent ( grid_ptr2 , grid_ptr , domain_id , parent_id , found_the_id )
183	IF ( found_the_id ) THEN
184
185	sibling_count = 0
186	DO dom_loop = 2 , domain_id
187	CALL nl_get_parent_id ( dom_loop, parent_id_hold )
188	IF ( parent_id_hold .EQ. parent_id ) THEN
189	sibling_count = sibling_count + 1
190	END IF
191	END DO
192	CALL alloc_and_configure_domain ( domain_id = domain_id , &
193	grid = another_grid , &
194	parent = grid_ptr , &
195	kid = sibling_count )
196	grid => another_grid
197	ELSE
198	CALL wrf_error_fatal( 'real_em.F: Could not find the parent domain')
199	END IF
200	END IF
201
202	CALL Setup_Timekeeping ( grid )
203	CALL set_current_grid_ptr( grid )
204	CALL domain_clockprint ( 150, grid, &
205	'DEBUG real: clock after Setup_Timekeeping,' )
206	CALL domain_clock_set( grid, &
207	time_step_seconds=model_config_rec%interval_seconds )
208	CALL domain_clockprint ( 150, grid, &
209	'DEBUG real: clock after timeStep set,' )
210
211
212	CALL wrf_debug ( 100 , 'real_em: calling set_scalar_indices_from_config ' )
213	CALL set_scalar_indices_from_config ( grid%id , idum1, idum2 )
214
215	CALL wrf_debug ( 100 , 'real_em: calling model_to_grid_config_rec ' )
216	CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
217
218	! Initialize the WRF IO: open files, init file handles, etc.
219
220	CALL wrf_debug ( 100 , 'real_em: calling init_wrfio' )
221	CALL init_wrfio
222
223	! Some of the configuration values may have been modified from the initial READ
224	! of the NAMELIST, so we re-broadcast the configuration records.
225
226	#ifdef DM_PARALLEL
227	CALL wrf_debug ( 100 , 'real_em: re-broadcast the configuration records' )
228	CALL get_config_as_buffer( configbuf, configbuflen, nbytes )
229	CALL wrf_dm_bcast_bytes( configbuf, nbytes )
230	CALL set_config_as_buffer( configbuf, configbuflen )
231	#endif
232
233	! No looping in this layer.
234
235	CALL wrf_debug ( 100 , 'calling med_sidata_input' )
236	CALL med_sidata_input ( grid , config_flags )
237	CALL wrf_debug ( 100 , 'backfrom med_sidata_input' )
238
239	ELSE
240	CYCLE all_domains
241	END IF
242
243	END DO all_domains
244
245	CALL set_current_grid_ptr( head_grid )
246
247	! We are done.
248
249	CALL wrf_debug ( 0 , 'real_em: SUCCESS COMPLETE REAL_EM INIT' )
250
251	CALL wrf_shutdown
252
253	CALL WRFU_Finalize( rc=rc )
254
255	END PROGRAM real_data
256
257	SUBROUTINE med_sidata_input ( grid , config_flags )
258	! Driver layer
259	USE module_domain
260	USE module_io_domain
261	! Model layer
262	USE module_configure
263	USE module_bc_time_utilities
264	USE module_initialize_real
265	USE module_optional_input
266	#ifdef WRF_CHEM
267	USE module_input_chem_data
268	USE module_input_chem_bioemiss
269	USE module_input_chem_emissopt3
270	#endif
271
272	USE module_date_time
273	USE module_utility
274
275	IMPLICIT NONE
276
277
278	! Interface
279	INTERFACE
280	SUBROUTINE start_domain ( grid , allowed_to_read ) ! comes from module_start in appropriate dyn_ directory
281	USE module_domain
282	TYPE (domain) grid
283	LOGICAL, INTENT(IN) :: allowed_to_read
284	END SUBROUTINE start_domain
285	END INTERFACE
286
287	! Arguments
288	TYPE(domain) :: grid
289	TYPE (grid_config_rec_type) :: config_flags
290	! Local
291	INTEGER :: time_step_begin_restart
292	INTEGER :: idsi , ierr , myproc
293	CHARACTER (LEN=80) :: si_inpname
294	CHARACTER (LEN=80) :: message
295
296	CHARACTER(LEN=19) :: start_date_char , end_date_char , current_date_char , next_date_char
297
298	INTEGER :: time_loop_max , loop, rc
299	INTEGER :: julyr , julday
300	REAL :: gmt
301	real::t1,t2,t3,t4
302
303	grid%input_from_file = .true.
304	grid%input_from_file = .false.
305
306	CALL compute_si_start_and_end ( model_config_rec%start_year (grid%id) , &
307	model_config_rec%start_month (grid%id) , &
308	model_config_rec%start_day (grid%id) , &
309	model_config_rec%start_hour (grid%id) , &
310	model_config_rec%start_minute(grid%id) , &
311	model_config_rec%start_second(grid%id) , &
312	model_config_rec% end_year (grid%id) , &
313	model_config_rec% end_month (grid%id) , &
314	model_config_rec% end_day (grid%id) , &
315	model_config_rec% end_hour (grid%id) , &
316	model_config_rec% end_minute(grid%id) , &
317	model_config_rec% end_second(grid%id) , &
318	model_config_rec%interval_seconds , &
319	model_config_rec%real_data_init_type , &
320	start_date_char , end_date_char , time_loop_max )
321
322	! Override stop time with value computed above.
323	CALL domain_clock_set( grid, stop_timestr=end_date_char )
324
325	! TBH: for now, turn off stop time and let it run data-driven
326	CALL WRFU_ClockStopTimeDisable( grid%domain_clock, rc=rc )
327	CALL wrf_check_error( WRFU_SUCCESS, rc, &
328	'WRFU_ClockStopTimeDisable(grid%domain_clock) FAILED', &
329	__FILE__ , &
330	__LINE__ )
331	CALL domain_clockprint ( 150, grid, &
332	'DEBUG med_sidata_input: clock after stopTime set,' )
333
334	! Here we define the initial time to process, for later use by the code.
335
336	current_date_char = start_date_char
337	start_date = start_date_char // '.0000'
338	current_date = start_date
339
340	CALL nl_set_bdyfrq ( grid%id , REAL(model_config_rec%interval_seconds) )
341
342	!!!!!!! Loop over each time period to process.
343
344	CALL cpu_time ( t1 )
345	DO loop = 1 , time_loop_max
346
347	internal_time_loop = loop
348	IF ( ( grid%id .GT. 1 ) .AND. ( loop .GT. 1 ) .AND. &
349	( model_config_rec%grid_fdda(grid%id) .EQ. 0 ) .AND. &
350	( model_config_rec%sst_update .EQ. 0 ) ) EXIT
351
352	print *,' '
353	print *,'-----------------------------------------------------------------------------'
354	print *,' '
355	print '(A,I2,A,A,A,I4,A,I4)' , &
356	' Domain ',grid%id,': Current date being processed: ',current_date, ', which is loop #',loop,' out of ',time_loop_max
357
358	! After current_date has been set, fill in the julgmt stuff.
359
360	CALL geth_julgmt ( config_flags%julyr , config_flags%julday , config_flags%gmt )
361
362	print *,'configflags%julyr, %julday, %gmt:',config_flags%julyr, config_flags%julday, config_flags%gmt
363	! Now that the specific Julian info is available, save these in the model config record.
364
365	CALL nl_set_gmt (grid%id, config_flags%gmt)
366	CALL nl_set_julyr (grid%id, config_flags%julyr)
367	CALL nl_set_julday (grid%id, config_flags%julday)
368
369	! Open the input file for real. This is either the "new" one or the "old" one. The "new" one could have
370	! a suffix for the type of the data format. Check to see if either is around.
371
372	CALL cpu_time ( t3 )
373	WRITE ( wrf_err_message , FMT='(A,A)' )'med_sidata_input: calling open_r_dataset for ', &
374	TRIM(config_flags%auxinput1_inname)
375	CALL wrf_debug ( 100 , wrf_err_message )
376	IF ( config_flags%auxinput1_inname(1:8) .NE. 'wrf_real' ) THEN
377	CALL construct_filename4a( si_inpname , config_flags%auxinput1_inname , grid%id , 2 , &
378	current_date_char , config_flags%io_form_auxinput1 )
379	ELSE
380	CALL construct_filename2a( si_inpname , config_flags%auxinput1_inname , grid%id , 2 , &
381	current_date_char )
382	END IF
383	CALL open_r_dataset ( idsi, TRIM(si_inpname) , grid , config_flags , "DATASET=AUXINPUT1", ierr )
384	IF ( ierr .NE. 0 ) THEN
385	CALL wrf_error_fatal( 'error opening ' // TRIM(si_inpname) // &
386	' for input; bad date in namelist or file not in directory' )
387	END IF
388
389	! Input data.
390
391	CALL wrf_debug ( 100 , 'med_sidata_input: calling input_aux_model_input1' )
392	CALL input_aux_model_input1 ( idsi , grid , config_flags , ierr )
393	CALL cpu_time ( t4 )
394	WRITE ( wrf_err_message , FMT='(A,I10,A)' ) 'Timing for input ',NINT(t4-t3) ,' s.'
395	CALL wrf_debug( 0, wrf_err_message )
396
397	! Possible optional SI input. This sets flags used by init_domain.
398
399	CALL cpu_time ( t3 )
400	IF ( loop .EQ. 1 ) THEN
401	already_been_here = .FALSE.
402	CALL wrf_debug ( 100 , 'med_sidata_input: calling init_module_optional_input' )
403	CALL init_module_optional_input ( grid , config_flags )
404	END IF
405	CALL wrf_debug ( 100 , 'med_sidata_input: calling optional_input' )
406	CALL optional_input ( grid , idsi )
407
408	! Initialize the mother domain for this time period with input data.
409
410	CALL wrf_debug ( 100 , 'med_sidata_input: calling init_domain' )
411	grid%input_from_file = .true.
412	CALL init_domain ( grid )
413	CALL cpu_time ( t4 )
414	WRITE ( wrf_err_message , FMT='(A,I10,A)' ) 'Timing for processing ',NINT(t4-t3) ,' s.'
415	CALL wrf_debug( 0, wrf_err_message )
416	CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
417
418	! Close this file that is output from the SI and input to this pre-proc.
419
420	CALL wrf_debug ( 100 , 'med_sidata_input: back from init_domain' )
421	CALL close_dataset ( idsi , config_flags , "DATASET=AUXINPUT1" )
422
423	#ifdef WRF_CHEM
424	IF ( loop == 1 ) THEN
425	IF( grid%chem_opt > 0 ) then
426	! Read the chemistry data from a previous wrf forecast (wrfout file)
427	IF(grid%chem_in_opt == 1 ) THEN
428	message = 'INITIALIZING CHEMISTRY WITH OLD SIMULATION'
429	CALL wrf_message ( message )
430
431	CALL input_ext_chem_file( grid )
432	IF(grid%emiss_opt == ECPTEC .or. grid%emiss_opt == GOCART_ECPTEC &
433	.or. grid%biomass_burn_opt == BIOMASSB) THEN
434	message = 'READING EMISSIONS DATA OPT 3'
435	CALL wrf_message ( message )
436	! CALL med_read_bin_chem_emissopt3 ( grid , config_flags)
437	CALL med_read_wrf_chem_emissopt3 ( grid , config_flags)
438	END IF
439
440	IF(grid%bio_emiss_opt == 2 ) THEN
441	message = 'READING BEIS3.11 EMISSIONS DATA'
442	CALL wrf_message ( message )
443	CALL med_read_wrf_chem_bioemiss ( grid , config_flags)
444	else IF(grid%bio_emiss_opt == 3 ) THEN !shc
445	message = 'READING MEGAN 2 EMISSIONS DATA'
446	CALL wrf_message ( message )
447	CALL med_read_wrf_chem_bioemiss ( grid , config_flags)
448	END IF
449
450	IF(grid%dust_opt == 1 .or. grid%dmsemis_opt == 1 .or. grid%chem_opt == 300) THEN !shc
451	message = 'READING GOCART BG AND/OR DUST and DMS REF FIELDS'
452	CALL wrf_message ( message )
453	CALL med_read_wrf_chem_gocart_bg ( grid , config_flags)
454	END IF
455
456	ELSEIF(grid%chem_in_opt == 0)then
457	! Generate chemistry data from a idealized vertical profile
458	message = 'STARTING WITH BACKGROUND CHEMISTRY '
459	CALL wrf_message ( message )
460
461	CALL input_chem_profile ( grid )
462
463	IF(grid%bio_emiss_opt == 2 ) THEN
464	message = 'READING BEIS3.11 EMISSIONS DATA'
465	CALL wrf_message ( message )
466	CALL med_read_wrf_chem_bioemiss ( grid , config_flags)
467	else IF(grid%bio_emiss_opt == 3 ) THEN !shc
468	message = 'READING MEGAN 2 EMISSIONS DATA'
469	CALL wrf_message ( message )
470	CALL med_read_wrf_chem_bioemiss ( grid , config_flags)
471	END IF
472	IF(grid%emiss_opt == ECPTEC .or. grid%emiss_opt == GOCART_ECPTEC &
473	.or. grid%biomass_burn_opt == BIOMASSB) THEN
474	message = 'READING EMISSIONS DATA OPT 3'
475	CALL wrf_message ( message )
476	! CALL med_read_bin_chem_emissopt3 ( grid , config_flags)
477	CALL med_read_wrf_chem_emissopt3 ( grid , config_flags)
478	END IF
479
480	IF(grid%dust_opt == 1 .or. grid%dmsemis_opt == 1 .or. grid%chem_opt == 300) THEN !shc
481	message = 'READING GOCART BG AND/OR DUST and DMS REF FIELDS'
482	CALL wrf_message ( message )
483	CALL med_read_wrf_chem_gocart_bg ( grid , config_flags)
484	END IF
485
486	ELSE
487	message = 'RUNNING WITHOUT CHEMISTRY INITIALIZATION'
488	CALL wrf_message ( message )
489	END IF
490	END IF
491	END IF
492	#endif
493
494	CALL cpu_time ( t3 )
495	CALL assemble_output ( grid , config_flags , loop , time_loop_max )
496	CALL cpu_time ( t4 )
497	WRITE ( wrf_err_message , FMT='(A,I10,A)' ) 'Timing for output ',NINT(t4-t3) ,' s.'
498	CALL wrf_debug( 0, wrf_err_message )
499	CALL cpu_time ( t2 )
500	WRITE ( wrf_err_message , FMT='(A,I4,A,I10,A)' ) 'Timing for loop # ',loop,' = ',NINT(t2-t1) ,' s.'
501	CALL wrf_debug( 0, wrf_err_message )
502
503	! If this is not the last time, we define the next time that we are going to process.
504
505	IF ( loop .NE. time_loop_max ) THEN
506	CALL geth_newdate ( current_date_char , start_date_char , loop * model_config_rec%interval_seconds )
507	current_date = current_date_char // '.0000'
508	CALL domain_clockprint ( 150, grid, &
509	'DEBUG med_sidata_input: clock before current_date set,' )
510	WRITE (wrf_err_message,*) &
511	'DEBUG med_sidata_input: before currTime set, current_date = ',TRIM(current_date)
512	CALL wrf_debug ( 150 , wrf_err_message )
513	CALL domain_clock_set( grid, current_date(1:19) )
514	CALL domain_clockprint ( 150, grid, &
515	'DEBUG med_sidata_input: clock after current_date set,' )
516	END IF
517	CALL cpu_time ( t1 )
518	END DO
519
520	END SUBROUTINE med_sidata_input
521
522	SUBROUTINE compute_si_start_and_end ( &
523	start_year , start_month , start_day , start_hour , start_minute , start_second , &
524	end_year , end_month , end_day , end_hour , end_minute , end_second , &
525	interval_seconds , real_data_init_type , &
526	start_date_char , end_date_char , time_loop_max )
527
528	USE module_date_time
529
530	IMPLICIT NONE
531
532	INTEGER :: start_year , start_month , start_day , start_hour , start_minute , start_second
533	INTEGER :: end_year , end_month , end_day , end_hour , end_minute , end_second
534	INTEGER :: interval_seconds , real_data_init_type
535	INTEGER :: time_loop_max , time_loop
536
537	CHARACTER(LEN=19) :: current_date_char , start_date_char , end_date_char , next_date_char
538
539	#ifdef PLANET
540	WRITE ( start_date_char , FMT = '(I4.4,"-",I5.5,"_",I2.2,":",I2.2,":",I2.2)' ) &
541	start_year,start_day,start_hour,start_minute,start_second
542	WRITE ( end_date_char , FMT = '(I4.4,"-",I5.5,"_",I2.2,":",I2.2,":",I2.2)' ) &
543	end_year, end_day, end_hour, end_minute, end_second
544	#else
545	WRITE ( start_date_char , FMT = '(I4.4,"-",I2.2,"-",I2.2,"_",I2.2,":",I2.2,":",I2.2)' ) &
546	start_year,start_month,start_day,start_hour,start_minute,start_second
547	WRITE ( end_date_char , FMT = '(I4.4,"-",I2.2,"-",I2.2,"_",I2.2,":",I2.2,":",I2.2)' ) &
548	end_year, end_month, end_day, end_hour, end_minute, end_second
549	#endif
550
551	IF ( end_date_char .LT. start_date_char ) THEN
552	CALL wrf_error_fatal( 'Ending date in namelist ' // end_date_char // ' prior to beginning date ' // start_date_char )
553	END IF
554
555	! start_date = start_date_char // '.0000'
556
557	! Figure out our loop count for the processing times.
558
559	time_loop = 1
560	PRINT '(A,I4,A,A,A)','Time period #',time_loop,' to process = ',start_date_char,'.'
561	current_date_char = start_date_char
562	loop_count : DO
563	CALL geth_newdate ( next_date_char , current_date_char , interval_seconds )
564	IF ( next_date_char .LT. end_date_char ) THEN
565	time_loop = time_loop + 1
566	PRINT '(A,I4,A,A,A)','Time period #',time_loop,' to process = ',next_date_char,'.'
567	current_date_char = next_date_char
568	ELSE IF ( next_date_char .EQ. end_date_char ) THEN
569	time_loop = time_loop + 1
570	PRINT '(A,I4,A,A,A)','Time period #',time_loop,' to process = ',next_date_char,'.'
571	PRINT '(A,I4,A)','Total analysis times to input = ',time_loop,'.'
572	time_loop_max = time_loop
573	EXIT loop_count
574	ELSE IF ( next_date_char .GT. end_date_char ) THEN
575	PRINT '(A,I4,A)','Total analysis times to input = ',time_loop,'.'
576	time_loop_max = time_loop
577	EXIT loop_count
578	END IF
579	END DO loop_count
580	END SUBROUTINE compute_si_start_and_end
581
582	SUBROUTINE assemble_output ( grid , config_flags , loop , time_loop_max )
583
584	USE module_big_step_utilities_em
585	USE module_domain
586	USE module_io_domain
587	USE module_configure
588	USE module_date_time
589	USE module_bc
590	IMPLICIT NONE
591
592	TYPE(domain) :: grid
593	TYPE (grid_config_rec_type) :: config_flags
594	INTEGER , INTENT(IN) :: loop , time_loop_max
595
596	INTEGER :: ids , ide , jds , jde , kds , kde
597	INTEGER :: ims , ime , jms , jme , kms , kme
598	INTEGER :: ips , ipe , jps , jpe , kps , kpe
599	INTEGER :: ijds , ijde , spec_bdy_width
600	INTEGER :: i , j , k , idts
601
602	INTEGER :: id1 , interval_seconds , ierr, rc, sst_update, grid_fdda
603	INTEGER , SAVE :: id, id2, id4
604	CHARACTER (LEN=80) :: inpname , bdyname
605	CHARACTER(LEN= 4) :: loop_char
606	character *19 :: temp19
607	character *24 :: temp24 , temp24b
608
609	REAL , DIMENSION(:,:,:) , ALLOCATABLE , SAVE :: ubdy3dtemp1 , vbdy3dtemp1 , tbdy3dtemp1 , pbdy3dtemp1 , qbdy3dtemp1
610	REAL , DIMENSION(:,:,:) , ALLOCATABLE , SAVE :: mbdy2dtemp1
611	REAL , DIMENSION(:,:,:) , ALLOCATABLE , SAVE :: ubdy3dtemp2 , vbdy3dtemp2 , tbdy3dtemp2 , pbdy3dtemp2 , qbdy3dtemp2
612	REAL , DIMENSION(:,:,:) , ALLOCATABLE , SAVE :: mbdy2dtemp2
613	real::t1,t2
614
615	! Various sizes that we need to be concerned about.
616
617	ids = grid%sd31
618	ide = grid%ed31
619	kds = grid%sd32
620	kde = grid%ed32
621	jds = grid%sd33
622	jde = grid%ed33
623
624	ims = grid%sm31
625	ime = grid%em31
626	kms = grid%sm32
627	kme = grid%em32
628	jms = grid%sm33
629	jme = grid%em33
630
631	ips = grid%sp31
632	ipe = grid%ep31
633	kps = grid%sp32
634	kpe = grid%ep32
635	jps = grid%sp33
636	jpe = grid%ep33
637
638	ijds = MIN ( ids , jds )
639	ijde = MAX ( ide , jde )
640
641	! Boundary width, scalar value.
642
643	spec_bdy_width = model_config_rec%spec_bdy_width
644	interval_seconds = model_config_rec%interval_seconds
645	sst_update = model_config_rec%sst_update
646	grid_fdda = model_config_rec%grid_fdda(grid%id)
647
648
649	IF ( loop .EQ. 1 ) THEN
650
651	IF ( ( time_loop_max .EQ. 1 ) .OR. ( config_flags%polar ) ) THEN
652
653	! No need to allocate space since we do not need the lateral boundary data yet
654	! or at all (in case of the polar flag).
655
656	ELSE
657
658	! This is the space needed to save the current 3d data for use in computing
659	! the lateral boundary tendencies.
660
661	IF ( ALLOCATED ( ubdy3dtemp1 ) ) DEALLOCATE ( ubdy3dtemp1 )
662	IF ( ALLOCATED ( vbdy3dtemp1 ) ) DEALLOCATE ( vbdy3dtemp1 )
663	IF ( ALLOCATED ( tbdy3dtemp1 ) ) DEALLOCATE ( tbdy3dtemp1 )
664	IF ( ALLOCATED ( pbdy3dtemp1 ) ) DEALLOCATE ( pbdy3dtemp1 )
665	IF ( ALLOCATED ( qbdy3dtemp1 ) ) DEALLOCATE ( qbdy3dtemp1 )
666	IF ( ALLOCATED ( mbdy2dtemp1 ) ) DEALLOCATE ( mbdy2dtemp1 )
667	IF ( ALLOCATED ( ubdy3dtemp2 ) ) DEALLOCATE ( ubdy3dtemp2 )
668	IF ( ALLOCATED ( vbdy3dtemp2 ) ) DEALLOCATE ( vbdy3dtemp2 )
669	IF ( ALLOCATED ( tbdy3dtemp2 ) ) DEALLOCATE ( tbdy3dtemp2 )
670	IF ( ALLOCATED ( pbdy3dtemp2 ) ) DEALLOCATE ( pbdy3dtemp2 )
671	IF ( ALLOCATED ( qbdy3dtemp2 ) ) DEALLOCATE ( qbdy3dtemp2 )
672	IF ( ALLOCATED ( mbdy2dtemp2 ) ) DEALLOCATE ( mbdy2dtemp2 )
673
674	ALLOCATE ( ubdy3dtemp1(ims:ime,kms:kme,jms:jme) )
675	ALLOCATE ( vbdy3dtemp1(ims:ime,kms:kme,jms:jme) )
676	ALLOCATE ( tbdy3dtemp1(ims:ime,kms:kme,jms:jme) )
677	ALLOCATE ( pbdy3dtemp1(ims:ime,kms:kme,jms:jme) )
678	ALLOCATE ( qbdy3dtemp1(ims:ime,kms:kme,jms:jme) )
679	ALLOCATE ( mbdy2dtemp1(ims:ime,1:1, jms:jme) )
680	ALLOCATE ( ubdy3dtemp2(ims:ime,kms:kme,jms:jme) )
681	ALLOCATE ( vbdy3dtemp2(ims:ime,kms:kme,jms:jme) )
682	ALLOCATE ( tbdy3dtemp2(ims:ime,kms:kme,jms:jme) )
683	ALLOCATE ( pbdy3dtemp2(ims:ime,kms:kme,jms:jme) )
684	ALLOCATE ( qbdy3dtemp2(ims:ime,kms:kme,jms:jme) )
685	ALLOCATE ( mbdy2dtemp2(ims:ime,1:1, jms:jme) )
686
687	END IF
688
689	! Open the wrfinput file. From this program, this is an output file.
690
691	CALL construct_filename1( inpname , 'wrfinput' , grid%id , 2 )
692	CALL open_w_dataset ( id1, TRIM(inpname) , grid , config_flags , output_model_input , "DATASET=INPUT", ierr )
693	IF ( ierr .NE. 0 ) THEN
694	CALL wrf_error_fatal( 'real: error opening wrfinput for writing' )
695	END IF
696	CALL output_model_input ( id1, grid , config_flags , ierr )
697	CALL close_dataset ( id1 , config_flags , "DATASET=INPUT" )
698
699	IF ( time_loop_max .NE. 1 ) THEN
700	IF(sst_update .EQ. 1)THEN
701	CALL construct_filename1( inpname , 'wrflowinp' , grid%id , 2 )
702	CALL open_w_dataset ( id4, TRIM(inpname) , grid , config_flags , output_aux_model_input4 , "DATASET=AUXINPUT4", ierr )
703	IF ( ierr .NE. 0 ) THEN
704	CALL wrf_error_fatal( 'real: error opening wrflowinp for writing' )
705	END IF
706	CALL output_aux_model_input4 ( id4, grid , config_flags , ierr )
707	END IF
708	END IF
709
710	IF ( ( time_loop_max .EQ. 1 ) .OR. ( config_flags%polar ) ) THEN
711
712	! No need to couple data since no lateral BCs required.
713
714	ELSE
715
716	! We need to save the 3d data to compute a difference during the next loop. Couple the
717	! 3d fields with total mu (mub + mu_2) and the stagger-specific map scale factor.
718
719	! u, theta, h, scalars coupled with my; v coupled with mx
720	CALL couple ( grid%mu_2 , grid%mub , ubdy3dtemp1 , grid%u_2 , 'u' , grid%msfuy , &
721	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
722	CALL couple ( grid%mu_2 , grid%mub , vbdy3dtemp1 , grid%v_2 , 'v' , grid%msfvx , &
723	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
724	CALL couple ( grid%mu_2 , grid%mub , tbdy3dtemp1 , grid%t_2 , 't' , grid%msfty , &
725	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
726	CALL couple ( grid%mu_2 , grid%mub , pbdy3dtemp1 , grid%ph_2 , 'h' , grid%msfty , &
727	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
728	CALL couple ( grid%mu_2 , grid%mub , qbdy3dtemp1 , grid%moist(:,:,:,P_QV) , 't' , grid%msfty , &
729	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
730
731	DO j = jps , MIN(jde-1,jpe)
732	DO i = ips , MIN(ide-1,ipe)
733	mbdy2dtemp1(i,1,j) = grid%mu_2(i,j)
734	END DO
735	END DO
736
737	END IF
738
739	IF(grid_fdda .EQ. 1)THEN
740	DO j = jps , jpe
741	DO k = kps , kpe
742	DO i = ips , ipe
743	grid%fdda3d(i,k,j,p_u_ndg_old) = grid%u_2(i,k,j)
744	grid%fdda3d(i,k,j,p_v_ndg_old) = grid%v_2(i,k,j)
745	grid%fdda3d(i,k,j,p_t_ndg_old) = grid%t_2(i,k,j)
746	grid%fdda3d(i,k,j,p_q_ndg_old) = grid%moist(i,k,j,P_QV)
747	grid%fdda3d(i,k,j,p_ph_ndg_old) = grid%ph_2(i,k,j)
748	END DO
749	END DO
750	END DO
751
752	DO j = jps , jpe
753	DO i = ips , ipe
754	grid%fdda2d(i,1,j,p_mu_ndg_old) = grid%mu_2(i,j)
755	grid%fdda2d(i,1,j,p_t2_ndg_old) = grid%t2(i,j)
756	grid%fdda2d(i,1,j,p_q2_ndg_old) = grid%q2(i,j)
757	grid%fdda2d(i,1,j,p_sn_ndg_old) = grid%snow(i,j)
758	END DO
759	END DO
760	END IF
761
762	IF ( ( time_loop_max .EQ. 1 ) .OR. ( config_flags%polar ) ) THEN
763
764	! No need to build boundary arrays, since no lateral BCs are being generated.
765
766	ELSE
767
768	! There are 2 components to the lateral boundaries. First, there is the starting
769	! point of this time period - just the outer few rows and columns.
770
771	CALL stuff_bdy ( ubdy3dtemp1 , grid%u_bxs, grid%u_bxe, grid%u_bys, grid%u_bye, &
772	'U' , spec_bdy_width , &
773	ids , ide , jds , jde , kds , kde , &
774	ims , ime , jms , jme , kms , kme , &
775	ips , ipe , jps , jpe , kps , kpe )
776	CALL stuff_bdy ( vbdy3dtemp1 , grid%v_bxs, grid%v_bxe, grid%v_bys, grid%v_bye, &
777	'V' , spec_bdy_width , &
778	ids , ide , jds , jde , kds , kde , &
779	ims , ime , jms , jme , kms , kme , &
780	ips , ipe , jps , jpe , kps , kpe )
781	CALL stuff_bdy ( tbdy3dtemp1 , grid%t_bxs, grid%t_bxe, grid%t_bys, grid%t_bye, &
782	'T' , spec_bdy_width , &
783	ids , ide , jds , jde , kds , kde , &
784	ims , ime , jms , jme , kms , kme , &
785	ips , ipe , jps , jpe , kps , kpe )
786	CALL stuff_bdy ( pbdy3dtemp1 , grid%ph_bxs, grid%ph_bxe, grid%ph_bys, grid%ph_bye, &
787	'W' , spec_bdy_width , &
788	ids , ide , jds , jde , kds , kde , &
789	ims , ime , jms , jme , kms , kme , &
790	ips , ipe , jps , jpe , kps , kpe )
791	CALL stuff_bdy ( qbdy3dtemp1 , grid%moist_bxs(:,:,:,P_QV), grid%moist_bxe(:,:,:,P_QV), &
792	grid%moist_bys(:,:,:,P_QV), grid%moist_bye(:,:,:,P_QV), &
793	'T' , spec_bdy_width , &
794	ids , ide , jds , jde , kds , kde , &
795	ims , ime , jms , jme , kms , kme , &
796	ips , ipe , jps , jpe , kps , kpe )
797	CALL stuff_bdy ( mbdy2dtemp1 , grid%mu_bxs, grid%mu_bxe, grid%mu_bys, grid%mu_bye, &
798	'M' , spec_bdy_width , &
799	ids , ide , jds , jde , 1 , 1 , &
800	ims , ime , jms , jme , 1 , 1 , &
801	ips , ipe , jps , jpe , 1 , 1 )
802	END IF
803
804
805	ELSE IF ( loop .GT. 1 ) THEN
806
807	IF(sst_update .EQ. 1)THEN
808	CALL output_aux_model_input4 ( id4, grid , config_flags , ierr )
809	END IF
810
811	! Open the boundary and the fdda file.
812
813	IF ( loop .eq. 2 ) THEN
814	IF ( (grid%id .eq. 1) .and. ( .NOT. config_flags%polar ) ) THEN
815	CALL construct_filename1( bdyname , 'wrfbdy' , grid%id , 2 )
816	CALL open_w_dataset ( id, TRIM(bdyname) , grid , config_flags , output_boundary , "DATASET=BOUNDARY", ierr )
817	IF ( ierr .NE. 0 ) THEN
818	CALL wrf_error_fatal( 'real: error opening wrfbdy for writing' )
819	END IF
820	END IF
821	IF(grid_fdda .EQ. 1)THEN
822	CALL construct_filename1( inpname , 'wrffdda' , grid%id , 2 )
823	CALL open_w_dataset ( id2, TRIM(inpname) , grid , config_flags , output_aux_model_input10 , "DATASET=AUXINPUT10", ierr )
824	IF ( ierr .NE. 0 ) THEN
825	CALL wrf_error_fatal( 'real: error opening wrffdda for writing' )
826	END IF
827	END IF
828	ELSE
829	IF ( .NOT. domain_clockisstoptime(grid) ) THEN
830	CALL domain_clockadvance( grid )
831	CALL domain_clockprint ( 150, grid, &
832	'DEBUG assemble_output: clock after ClockAdvance,' )
833	END IF
834	END IF
835
836	IF ( config_flags%polar ) THEN
837
838	! No need to couple fields, since no lateral BCs are required.
839
840	ELSE
841
842	! Couple this time period's data with total mu, and save it in the *bdy3dtemp2 arrays.
843
844	! u, theta, h, scalars coupled with my; v coupled with mx
845	CALL couple ( grid%mu_2 , grid%mub , ubdy3dtemp2 , grid%u_2 , 'u' , grid%msfuy , &
846	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
847	CALL couple ( grid%mu_2 , grid%mub , vbdy3dtemp2 , grid%v_2 , 'v' , grid%msfvx , &
848	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
849	CALL couple ( grid%mu_2 , grid%mub , tbdy3dtemp2 , grid%t_2 , 't' , grid%msfty , &
850	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
851	CALL couple ( grid%mu_2 , grid%mub , pbdy3dtemp2 , grid%ph_2 , 'h' , grid%msfty , &
852	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
853	CALL couple ( grid%mu_2 , grid%mub , qbdy3dtemp2 , grid%moist(:,:,:,P_QV) , 't' , grid%msfty , &
854	ids, ide, jds, jde, kds, kde, ims, ime, jms, jme, kms, kme, ips, ipe, jps, jpe, kps, kpe )
855
856	DO j = jps , jpe
857	DO i = ips , ipe
858	mbdy2dtemp2(i,1,j) = grid%mu_2(i,j)
859	END DO
860	END DO
861
862	END IF
863
864	IF(grid_fdda .EQ. 1)THEN
865	DO j = jps , jpe
866	DO k = kps , kpe
867	DO i = ips , ipe
868	grid%fdda3d(i,k,j,p_u_ndg_new) = grid%u_2(i,k,j)
869	grid%fdda3d(i,k,j,p_v_ndg_new) = grid%v_2(i,k,j)
870	grid%fdda3d(i,k,j,p_t_ndg_new) = grid%t_2(i,k,j)
871	grid%fdda3d(i,k,j,p_q_ndg_new) = grid%moist(i,k,j,P_QV)
872	grid%fdda3d(i,k,j,p_ph_ndg_new) = grid%ph_2(i,k,j)
873	END DO
874	END DO
875	END DO
876
877	DO j = jps , jpe
878	DO i = ips , ipe
879	grid%fdda2d(i,1,j,p_mu_ndg_new) = grid%mu_2(i,j)
880	grid%fdda2d(i,1,j,p_t2_ndg_new) = grid%t2(i,j)
881	grid%fdda2d(i,1,j,p_q2_ndg_new) = grid%q2(i,j)
882	grid%fdda2d(i,1,j,p_sn_ndg_new) = grid%snow(i,j)
883	END DO
884	END DO
885	END IF
886
887	IF ( config_flags%polar ) THEN
888
889	! No need to build boundary arrays, since no lateral BCs are being generated.
890
891	ELSE
892
893	! During all of the loops after the first loop, we first compute the boundary
894	! tendencies with the current data values (*bdy3dtemp2 arrays) and the previously
895	! saved information stored in the *bdy3dtemp1 arrays.
896
897	CALL stuff_bdytend ( ubdy3dtemp2 , ubdy3dtemp1 , REAL(interval_seconds) , &
898	grid%u_btxs, grid%u_btxe, &
899	grid%u_btys, grid%u_btye, &
900	'U' , &
901	spec_bdy_width , &
902	ids , ide , jds , jde , kds , kde , &
903	ims , ime , jms , jme , kms , kme , &
904	ips , ipe , jps , jpe , kps , kpe )
905	CALL stuff_bdytend ( vbdy3dtemp2 , vbdy3dtemp1 , REAL(interval_seconds) , &
906	grid%v_btxs, grid%v_btxe, &
907	grid%v_btys, grid%v_btye, &
908	'V' , &
909	spec_bdy_width , &
910	ids , ide , jds , jde , kds , kde , &
911	ims , ime , jms , jme , kms , kme , &
912	ips , ipe , jps , jpe , kps , kpe )
913	CALL stuff_bdytend ( tbdy3dtemp2 , tbdy3dtemp1 , REAL(interval_seconds) , &
914	grid%t_btxs, grid%t_btxe, &
915	grid%t_btys, grid%t_btye, &
916	'T' , &
917	spec_bdy_width , &
918	ids , ide , jds , jde , kds , kde , &
919	ims , ime , jms , jme , kms , kme , &
920	ips , ipe , jps , jpe , kps , kpe )
921	CALL stuff_bdytend ( pbdy3dtemp2 , pbdy3dtemp1 , REAL(interval_seconds) , &
922	grid%ph_btxs, grid%ph_btxe, &
923	grid%ph_btys, grid%ph_btye, &
924	'W' , &
925	spec_bdy_width , &
926	ids , ide , jds , jde , kds , kde , &
927	ims , ime , jms , jme , kms , kme , &
928	ips , ipe , jps , jpe , kps , kpe )
929	CALL stuff_bdytend ( qbdy3dtemp2 , qbdy3dtemp1 , REAL(interval_seconds) , &
930	grid%moist_btxs(:,:,:,P_QV), grid%moist_btxe(:,:,:,P_QV), &
931	grid%moist_btys(:,:,:,P_QV), grid%moist_btye(:,:,:,P_QV), &
932	'T' , &
933	spec_bdy_width , &
934	ids , ide , jds , jde , kds , kde , &
935	ims , ime , jms , jme , kms , kme , &
936	ips , ipe , jps , jpe , kps , kpe )
937	CALL stuff_bdytend ( mbdy2dtemp2 , mbdy2dtemp1 , REAL(interval_seconds) , &
938	grid%mu_btxs, grid%mu_btxe, &
939	grid%mu_btys, grid%mu_btye, &
940	'M' , &
941	spec_bdy_width , &
942	ids , ide , jds , jde , 1 , 1 , &
943	ims , ime , jms , jme , 1 , 1 , &
944	ips , ipe , jps , jpe , 1 , 1 )
945	END IF
946
947	! Both pieces of the boundary data are now available to be written (initial time and tendency).
948	! This looks ugly, these date shifting things. What's it for? We want the "Times" variable
949	! in the lateral BDY file to have the valid times of when the initial fields are written.
950	! That's what the loop-2 thingy is for with the start date. We increment the start_date so
951	! that the starting time in the attributes is the second time period. Why you may ask. I
952	! agree, why indeed.
953
954	CALL domain_clockprint ( 150, grid, &
955	'DEBUG assemble_output: clock before 1st current_date set,' )
956	WRITE (wrf_err_message,*) &
957	'DEBUG assemble_output: before 1st currTime set, current_date = ',TRIM(current_date)
958	CALL wrf_debug ( 150 , wrf_err_message )
959	CALL domain_clock_set( grid, current_date(1:19) )
960	CALL domain_clockprint ( 150, grid, &
961	'DEBUG assemble_output: clock after 1st current_date set,' )
962
963	temp24= current_date
964	temp24b=start_date
965	start_date = current_date
966	CALL geth_newdate ( temp19 , temp24b(1:19) , (loop-2) * model_config_rec%interval_seconds )
967	current_date = temp19 // '.0000'
968	CALL domain_clockprint ( 150, grid, &
969	'DEBUG assemble_output: clock before 2nd current_date set,' )
970	WRITE (wrf_err_message,*) &
971	'DEBUG assemble_output: before 2nd currTime set, current_date = ',TRIM(current_date)
972	CALL wrf_debug ( 150 , wrf_err_message )
973	CALL domain_clock_set( grid, current_date(1:19) )
974	CALL domain_clockprint ( 150, grid, &
975	'DEBUG assemble_output: clock after 2nd current_date set,' )
976
977	IF ( config_flags%polar ) THEN
978
979	! No need to ouput boundary data for polar cases.
980
981	ELSE
982
983	! Output boundary file.
984
985	IF(grid%id .EQ. 1)THEN
986	print *,'LBC valid between these times ',current_date, ' ',start_date
987	CALL output_boundary ( id, grid , config_flags , ierr )
988	END IF
989
990	END IF
991
992	! Output gridded/analysis FDDA file.
993
994	IF(grid_fdda .EQ. 1) THEN
995	CALL output_aux_model_input10 ( id2, grid , config_flags , ierr )
996	END IF
997
998	current_date = temp24
999	start_date = temp24b
1000	CALL domain_clockprint ( 150, grid, &
1001	'DEBUG assemble_output: clock before 3rd current_date set,' )
1002	WRITE (wrf_err_message,*) &
1003	'DEBUG assemble_output: before 3rd currTime set, current_date = ',TRIM(current_date)
1004	CALL wrf_debug ( 150 , wrf_err_message )
1005	CALL domain_clock_set( grid, current_date(1:19) )
1006	CALL domain_clockprint ( 150, grid, &
1007	'DEBUG assemble_output: clock after 3rd current_date set,' )
1008
1009	! OK, for all of the loops, we output the initialzation data, which would allow us to
1010	! start the model at any of the available analysis time periods.
1011
1012	IF ( config_flags%all_ic_times ) THEN
1013	CALL construct_filename2a ( inpname , 'wrfinput_d<domain>.<date>' , grid%id , 2 , TRIM(current_date) )
1014	CALL open_w_dataset ( id1, inpname , grid , config_flags , output_model_input , "DATASET=INPUT", ierr )
1015	IF ( ierr .NE. 0 ) THEN
1016	CALL wrf_error_fatal( 'real: error opening' // inpname // ' for writing' )
1017	END IF
1018	CALL output_model_input ( id1, grid , config_flags , ierr )
1019	CALL close_dataset ( id1 , config_flags , "DATASET=INPUT" )
1020	END IF
1021
1022	! Is this or is this not the last time time? We can remove some unnecessary
1023	! stores if it is not.
1024
1025	IF ( loop .LT. time_loop_max ) THEN
1026
1027	IF ( config_flags%polar ) THEN
1028
1029	! No need to swap old for new for the boundary data, it is not required.
1030
1031	ELSE
1032
1033	! We need to save the 3d data to compute a difference during the next loop. Couple the
1034	! 3d fields with total mu (mub + mu_2) and the stagger-specific map scale factor.
1035	! We load up the boundary data again for use in the next loop.
1036
1037	DO j = jps , jpe
1038	DO k = kps , kpe
1039	DO i = ips , ipe
1040	ubdy3dtemp1(i,k,j) = ubdy3dtemp2(i,k,j)
1041	vbdy3dtemp1(i,k,j) = vbdy3dtemp2(i,k,j)
1042	tbdy3dtemp1(i,k,j) = tbdy3dtemp2(i,k,j)
1043	pbdy3dtemp1(i,k,j) = pbdy3dtemp2(i,k,j)
1044	qbdy3dtemp1(i,k,j) = qbdy3dtemp2(i,k,j)
1045	END DO
1046	END DO
1047	END DO
1048
1049	DO j = jps , jpe
1050	DO i = ips , ipe
1051	mbdy2dtemp1(i,1,j) = mbdy2dtemp2(i,1,j)
1052	END DO
1053	END DO
1054
1055	END IF
1056
1057	IF(grid_fdda .EQ. 1)THEN
1058	DO j = jps , jpe
1059	DO k = kps , kpe
1060	DO i = ips , ipe
1061	grid%fdda3d(i,k,j,p_u_ndg_old) = grid%fdda3d(i,k,j,p_u_ndg_new)
1062	grid%fdda3d(i,k,j,p_v_ndg_old) = grid%fdda3d(i,k,j,p_v_ndg_new)
1063	grid%fdda3d(i,k,j,p_t_ndg_old) = grid%fdda3d(i,k,j,p_t_ndg_new)
1064	grid%fdda3d(i,k,j,p_q_ndg_old) = grid%fdda3d(i,k,j,p_q_ndg_new)
1065	grid%fdda3d(i,k,j,p_ph_ndg_old) = grid%fdda3d(i,k,j,p_ph_ndg_new)
1066	END DO
1067	END DO
1068	END DO
1069
1070	DO j = jps , jpe
1071	DO i = ips , ipe
1072	grid%fdda2d(i,1,j,p_mu_ndg_old) = grid%fdda2d(i,1,j,p_mu_ndg_new)
1073	grid%fdda2d(i,1,j,p_t2_ndg_old) = grid%fdda2d(i,1,j,p_t2_ndg_new)
1074	grid%fdda2d(i,1,j,p_q2_ndg_old) = grid%fdda2d(i,1,j,p_q2_ndg_new)
1075	grid%fdda2d(i,1,j,p_sn_ndg_old) = grid%fdda2d(i,1,j,p_sn_ndg_new)
1076	END DO
1077	END DO
1078	END IF
1079
1080	IF ( config_flags%polar ) THEN
1081
1082	! No need to build boundary arrays, since no lateral BCs are being generated.
1083
1084	ELSE
1085
1086	! There are 2 components to the lateral boundaries. First, there is the starting
1087	! point of this time period - just the outer few rows and columns.
1088
1089	CALL stuff_bdy ( ubdy3dtemp1 , grid%u_bxs, grid%u_bxe, grid%u_bys, grid%u_bye, &
1090	'U' , spec_bdy_width , &
1091	ids , ide , jds , jde , kds , kde , &
1092	ims , ime , jms , jme , kms , kme , &
1093	ips , ipe , jps , jpe , kps , kpe )
1094	CALL stuff_bdy ( vbdy3dtemp1 , grid%v_bxs, grid%v_bxe, grid%v_bys, grid%v_bye, &
1095	'V' , spec_bdy_width , &
1096	ids , ide , jds , jde , kds , kde , &
1097	ims , ime , jms , jme , kms , kme , &
1098	ips , ipe , jps , jpe , kps , kpe )
1099	CALL stuff_bdy ( tbdy3dtemp1 , grid%t_bxs, grid%t_bxe, grid%t_bys, grid%t_bye, &
1100	'T' , spec_bdy_width , &
1101	ids , ide , jds , jde , kds , kde , &
1102	ims , ime , jms , jme , kms , kme , &
1103	ips , ipe , jps , jpe , kps , kpe )
1104	CALL stuff_bdy ( pbdy3dtemp1 , grid%ph_bxs, grid%ph_bxe, grid%ph_bys, grid%ph_bye, &
1105	'W' , spec_bdy_width , &
1106	ids , ide , jds , jde , kds , kde , &
1107	ims , ime , jms , jme , kms , kme , &
1108	ips , ipe , jps , jpe , kps , kpe )
1109	CALL stuff_bdy ( qbdy3dtemp1 , grid%moist_bxs(:,:,:,P_QV), grid%moist_bxe(:,:,:,P_QV), &
1110	grid%moist_bys(:,:,:,P_QV), grid%moist_bye(:,:,:,P_QV), &
1111	'T' , spec_bdy_width , &
1112	ids , ide , jds , jde , kds , kde , &
1113	ims , ime , jms , jme , kms , kme , &
1114	ips , ipe , jps , jpe , kps , kpe )
1115	CALL stuff_bdy ( mbdy2dtemp1 , grid%mu_bxs, grid%mu_bxe, grid%mu_bys, grid%mu_bye, &
1116	'M' , spec_bdy_width , &
1117	ids , ide , jds , jde , 1 , 1 , &
1118	ims , ime , jms , jme , 1 , 1 , &
1119	ips , ipe , jps , jpe , 1 , 1 )
1120
1121	END IF
1122
1123	ELSE IF ( loop .EQ. time_loop_max ) THEN
1124
1125	! If this is the last time through here, we need to close the files.
1126
1127	IF ( config_flags%polar ) THEN
1128
1129	! No need to close the boundary file, it was never used.
1130
1131	ELSE
1132	IF(grid%id .EQ. 1) THEN
1133	CALL close_dataset ( id , config_flags , "DATASET=BOUNDARY" )
1134	END IF
1135	END IF
1136
1137	IF(grid_fdda .EQ. 1) THEN
1138	CALL close_dataset ( id2 , config_flags , "DATASET=AUXINPUT10" )
1139	END IF
1140
1141	IF(sst_update .EQ. 1)THEN
1142	CALL close_dataset ( id4 , config_flags , "DATASET=AUXINPUT4" )
1143	END IF
1144
1145	END IF
1146
1147	END IF
1148
1149	END SUBROUTINE assemble_output

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format