Changeset 2594 for LMDZ5/branches/testing/libf/dynphy_lonlat/phylmd/iniphysiq_mod.F90

Timestamp:

Jul 18, 2016, 9:41:10 PM (8 years ago)

Author:

Laurent Fairhead

Message:

Merged trunk changes r2545:2589 into testing branch

Location:

LMDZ5/branches/testing

Files:

• . (modified) (1 prop)
• libf/dynphy_lonlat/phylmd/iniphysiq_mod.F90 (modified) (4 diffs)

LMDZ5/branches/testing/libf/dynphy_lonlat/phylmd/iniphysiq_mod.F90

@@ -12 +12 @@
                      prad,pg,pr,pcpp,iflag_phys)
   USE dimphy, ONLY: init_dimphy
-  USE mod_grid_phy_lmdz, ONLY: klon_glo,  & ! number of atmospheric columns (on full grid)
-                               regular_lonlat, &  ! regular longitude-latitude grid type
-                               nbp_lon, nbp_lat, nbp_lev
-  USE mod_phys_lmdz_para, ONLY: klon_omp, & ! number of columns (on local omp grid)
-                                klon_omp_begin, & ! start index of local omp subgrid
-                                klon_omp_end, & ! end index of local omp subgrid
-                                klon_mpi_begin ! start indes of columns (on local mpi grid)
-  USE geometry_mod, ONLY : init_geometry
+  USE inigeomphy_mod, ONLY: inigeomphy
+  USE mod_grid_phy_lmdz, ONLY: klon_glo ! number of atmospheric columns (on full grid)
+  USE mod_phys_lmdz_para, ONLY: klon_omp ! number of columns (on local omp grid)
   USE vertical_layers_mod, ONLY : init_vertical_layers
   USE infotrac, ONLY: nqtot,nqo,nbtr,tname,ttext,type_trac,&
@@ -39 +34 @@
   USE phystokenc_mod, ONLY: init_phystokenc
   USE phyaqua_mod, ONLY: iniaqua
-  USE physics_distribution_mod, ONLY : init_physics_distribution
-  USE regular_lonlat_mod, ONLY : init_regular_lonlat, &
-                                 east, west, north, south, &
-                                 north_east, north_west, &
-                                 south_west, south_east
-  USE mod_interface_dyn_phys, ONLY :  init_interface_dyn_phys
 #ifdef INCA
   USE indice_sol_mod, ONLY: nbsrf, is_oce, is_sic, is_ter, is_lic
@@ -92 +81 @@
   CHARACTER (LEN=20) :: modname = 'iniphysiq'
   CHARACTER (LEN=80) :: abort_message
-  REAL :: total_area_phy, total_area_dyn
 
-  ! boundaries, on global grid
-  REAL,ALLOCATABLE :: boundslon_reg(:,:)
-  REAL,ALLOCATABLE :: boundslat_reg(:,:)
-
-  ! global array, on full physics grid:
-  REAL,ALLOCATABLE :: latfi_glo(:)
-  REAL,ALLOCATABLE :: lonfi_glo(:)
-  REAL,ALLOCATABLE :: cufi_glo(:)
-  REAL,ALLOCATABLE :: cvfi_glo(:)
-  REAL,ALLOCATABLE :: airefi_glo(:)
-  REAL,ALLOCATABLE :: boundslonfi_glo(:,:)
-  REAL,ALLOCATABLE :: boundslatfi_glo(:,:)
-
-  ! local arrays, on given MPI/OpenMP domain:
-  REAL,ALLOCATABLE,SAVE :: latfi(:)
-  REAL,ALLOCATABLE,SAVE :: lonfi(:)
-  REAL,ALLOCATABLE,SAVE :: cufi(:)
-  REAL,ALLOCATABLE,SAVE :: cvfi(:)
-  REAL,ALLOCATABLE,SAVE :: airefi(:)
-  REAL,ALLOCATABLE,SAVE :: boundslonfi(:,:)
-  REAL,ALLOCATABLE,SAVE :: boundslatfi(:,:)
-!$OMP THREADPRIVATE (latfi,lonfi,cufi,cvfi,airefi,boundslonfi,boundslatfi)
 
 #ifndef CPP_PARA
@@ -123 +89 @@
 #endif
 
-  ! Initialize Physics distibution and parameters and interface with dynamics
-  IF (ii*jj>1) THEN ! general 3D case
-    CALL init_physics_distribution(regular_lonlat,4, &
-                                 nbp,ii,jj+1,nlayer,communicator)
-  ELSE ! For 1D model
-    CALL init_physics_distribution(regular_lonlat,4, &
-                                 1,1,1,nlayer,communicator)  
-  ENDIF
-  CALL init_interface_dyn_phys
+  ! --> initialize physics distribution, global fields and geometry
+  ! (i.e. things in phy_common or dynphy_lonlat)
+  CALL inigeomphy(ii,jj,nlayer, &
+               nbp, communicator, &
+               rlatu,rlatv, &
+               rlonu,rlonv, &
+               aire,cu,cv)
+
+  ! --> now initialize things specific to the phylmd physics package
   
-  ! init regular global longitude-latitude grid points and boundaries
-  ALLOCATE(boundslon_reg(ii,2))
-  ALLOCATE(boundslat_reg(jj+1,2))
-  
-  DO i=1,ii
-   boundslon_reg(i,east)=rlonu(i) 
-   boundslon_reg(i,west)=rlonu(i+1) 
-  ENDDO
-
-  boundslat_reg(1,north)= PI/2 
-  boundslat_reg(1,south)= rlatv(1)
-  DO j=2,jj
-   boundslat_reg(j,north)=rlatv(j-1) 
-   boundslat_reg(j,south)=rlatv(j) 
-  ENDDO
-  boundslat_reg(jj+1,north)= rlatv(jj) 
-  boundslat_reg(jj+1,south)= -PI/2
-
-  ! Write values in module regular_lonlat_mod
-  CALL init_regular_lonlat(ii,jj+1, rlonv(1:ii), rlatu, &
-                           boundslon_reg, boundslat_reg)
-
-  ! Generate global arrays on full physics grid
-  ALLOCATE(latfi_glo(klon_glo),lonfi_glo(klon_glo))
-  ALLOCATE(cufi_glo(klon_glo),cvfi_glo(klon_glo))
-  ALLOCATE(airefi_glo(klon_glo))
-  ALLOCATE(boundslonfi_glo(klon_glo,4))
-  ALLOCATE(boundslatfi_glo(klon_glo,4))
-  
-
-  IF (klon_glo>1) THEN ! general case
-    ! North pole
-    latfi_glo(1)=rlatu(1)
-    lonfi_glo(1)=0.
-    cufi_glo(1) = cu(1)
-    cvfi_glo(1) = cv(1)
-    boundslonfi_glo(1,north_east)=0
-    boundslatfi_glo(1,north_east)=PI/2
-    boundslonfi_glo(1,north_west)=2*PI
-    boundslatfi_glo(1,north_west)=PI/2
-    boundslonfi_glo(1,south_west)=2*PI
-    boundslatfi_glo(1,south_west)=rlatv(1)
-    boundslonfi_glo(1,south_east)=0
-    boundslatfi_glo(1,south_east)=rlatv(1)
-    DO j=2,jj
-      DO i=1,ii
-        k=(j-2)*ii+1+i
-        latfi_glo(k)= rlatu(j)
-        lonfi_glo(k)= rlonv(i)
-        cufi_glo(k) = cu((j-1)*(ii+1)+i)
-        cvfi_glo(k) = cv((j-1)*(ii+1)+i)
-        boundslonfi_glo(k,north_east)=rlonu(i)
-        boundslatfi_glo(k,north_east)=rlatv(j-1)
-        boundslonfi_glo(k,north_west)=rlonu(i+1)
-        boundslatfi_glo(k,north_west)=rlatv(j-1)
-        boundslonfi_glo(k,south_west)=rlonu(i+1)
-        boundslatfi_glo(k,south_west)=rlatv(j)
-        boundslonfi_glo(k,south_east)=rlonu(i)
-        boundslatfi_glo(k,south_east)=rlatv(j)
-      ENDDO
-    ENDDO
-    ! South pole
-    latfi_glo(klon_glo)= rlatu(jj+1)
-    lonfi_glo(klon_glo)= 0.
-    cufi_glo(klon_glo) = cu((ii+1)*jj+1)
-    cvfi_glo(klon_glo) = cv((ii+1)*jj-ii)
-    boundslonfi_glo(klon_glo,north_east)= 0
-    boundslatfi_glo(klon_glo,north_east)= rlatv(jj)
-    boundslonfi_glo(klon_glo,north_west)= 2*PI
-    boundslatfi_glo(klon_glo,north_west)= rlatv(jj)
-    boundslonfi_glo(klon_glo,south_west)= 2*PI
-    boundslatfi_glo(klon_glo,south_west)= -PI/2
-    boundslonfi_glo(klon_glo,south_east)= 0
-    boundslatfi_glo(klon_glo,south_east)= -Pi/2
-
-    ! build airefi_glo(), mesh area on physics grid
-    CALL gr_dyn_fi(1,ii+1,jj+1,klon_glo,aire,airefi_glo)
-    ! Poles are single points on physics grid
-    airefi_glo(1)=sum(aire(1:ii,1))
-    airefi_glo(klon_glo)=sum(aire(1:ii,jj+1))
-
-    ! Sanity check: do total planet area match between physics and dynamics?
-    total_area_dyn=sum(aire(1:ii,1:jj+1))
-    total_area_phy=sum(airefi_glo(1:klon_glo))
-    IF (total_area_dyn/=total_area_phy) THEN
-      WRITE (lunout, *) 'iniphysiq: planet total surface discrepancy !!!'
-      WRITE (lunout, *) '     in the dynamics total_area_dyn=', total_area_dyn
-      WRITE (lunout, *) '  but in the physics total_area_phy=', total_area_phy
-      IF (abs(total_area_dyn-total_area_phy)>0.00001*total_area_dyn) THEN
-        ! stop here if the relative difference is more than 0.001%
-        abort_message = 'planet total surface discrepancy'
-        CALL abort_gcm(modname, abort_message, 1)
-      ENDIF
-    ENDIF
-  ELSE ! klon_glo==1, running the 1D model
-    ! just copy over input values
-    latfi_glo(1)=rlatu(1)
-    lonfi_glo(1)=rlonv(1)
-    cufi_glo(1)=cu(1)
-    cvfi_glo(1)=cv(1)
-    airefi_glo(1)=aire(1,1)
-    boundslonfi_glo(1,north_east)=rlonu(1)
-    boundslatfi_glo(1,north_east)=PI/2
-    boundslonfi_glo(1,north_west)=rlonu(2)
-    boundslatfi_glo(1,north_west)=PI/2
-    boundslonfi_glo(1,south_west)=rlonu(2)
-    boundslatfi_glo(1,south_west)=rlatv(1)
-    boundslonfi_glo(1,south_east)=rlonu(1)
-    boundslatfi_glo(1,south_east)=rlatv(1)
-  ENDIF ! of IF (klon_glo>1)
-
 !$OMP PARALLEL DEFAULT(SHARED) COPYIN(/temps/)
-  ! Now generate local lon/lat/cu/cv/area/bounds arrays
-  ALLOCATE(latfi(klon_omp),lonfi(klon_omp),cufi(klon_omp),cvfi(klon_omp))
-  ALLOCATE(airefi(klon_omp))
-  ALLOCATE(boundslonfi(klon_omp,4))
-  ALLOCATE(boundslatfi(klon_omp,4))
-
-
-  offset = klon_mpi_begin - 1
-  airefi(1:klon_omp) = airefi_glo(offset+klon_omp_begin:offset+klon_omp_end)
-  cufi(1:klon_omp) = cufi_glo(offset+klon_omp_begin:offset+klon_omp_end)
-  cvfi(1:klon_omp) = cvfi_glo(offset+klon_omp_begin:offset+klon_omp_end)
-  lonfi(1:klon_omp) = lonfi_glo(offset+klon_omp_begin:offset+klon_omp_end)
-  latfi(1:klon_omp) = latfi_glo(offset+klon_omp_begin:offset+klon_omp_end)
-  boundslonfi(1:klon_omp,:) = boundslonfi_glo(offset+klon_omp_begin:offset+klon_omp_end,:)
-  boundslatfi(1:klon_omp,:) = boundslatfi_glo(offset+klon_omp_begin:offset+klon_omp_end,:)
-
-  ! copy over local grid longitudes and latitudes
-  CALL init_geometry(klon_omp,lonfi,latfi,boundslonfi,boundslatfi, &
-                     airefi,cufi,cvfi)
 
   ! copy over preff , ap(), bp(), etc