Context Navigation

lmdz1d.F90 @ 3409

Last change on this file since 3409 was 3316, checked in by musat, 7 years ago
Corrections de bugs pour gfortran72
File size: 47.6 KB

Rev	Line
[2239]	1	!#ifdef CPP_1D
	2	!#include "../dyn3d/mod_const_mpi.F90"
	3	!#include "../dyn3d_common/control_mod.F90"
	4	!#include "../dyn3d_common/infotrac.F90"
	5	!#include "../dyn3d_common/disvert.F90"
[2017]	6
	7
[2019]	8	PROGRAM lmdz1d
	9
[2393]	10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
	11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
	12	clwcon, detr_therm, &
	13	qsol, fevap, z0m, z0h, agesno, &
	14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
	15	falb_dir, falb_dif, &
	16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
[2402]	17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
[2635]	18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
	19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
	20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
	21	zgam, zmax0, zmea, zpic, zsig, &
[2933]	22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
	23	prlw_ancien, prsw_ancien, prw_ancien
[2672]	24
[2635]	25	USE dimphy
	26	USE surface_data, only : type_ocean,ok_veget
	27	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
	28	pbl_surface_final
	29	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
[2019]	30
[2635]	31	USE infotrac ! new
	32	USE control_mod
[2393]	33	USE indice_sol_mod
	34	USE phyaqua_mod
[2716]	35	! USE mod_1D_cases_read
	36	USE mod_1D_cases_read2
[2393]	37	USE mod_1D_amma_read
[2565]	38	USE print_control_mod, ONLY: lunout, prt_level
[2393]	39	USE iniphysiq_mod, ONLY: iniphysiq
	40	USE mod_const_mpi, ONLY: comm_lmdz
[2418]	41	USE physiq_mod, ONLY: physiq
[2602]	42	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
[2786]	43	preff, aps, bps, pseudoalt, scaleheight
[2601]	44	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
	45	itau_dyn, itau_phy, start_time
[2019]	46
	47	implicit none
	48	#include "dimensions.h"
	49	#include "YOMCST.h"
	50	!!#include "control.h"
	51	#include "clesphys.h"
	52	#include "dimsoil.h"
	53	!#include "indicesol.h"
	54
	55	#include "compar1d.h"
	56	#include "flux_arp.h"
[2332]	57	#include "date_cas.h"
[2019]	58	#include "tsoilnudge.h"
	59	#include "fcg_gcssold.h"
	60	!!!#include "fbforcing.h"
[2565]	61	#include "compbl.h"
[2019]	62
	63	!=====================================================================
	64	! DECLARATIONS
	65	!=====================================================================
	66
	67	!---------------------------------------------------------------------
	68	! Externals
	69	!---------------------------------------------------------------------
	70	external fq_sat
	71	real fq_sat
	72
	73	!---------------------------------------------------------------------
	74	! Arguments d' initialisations de la physique (USER DEFINE)
	75	!---------------------------------------------------------------------
	76
	77	integer, parameter :: ngrid=1
	78	real :: zcufi = 1.
	79	real :: zcvfi = 1.
	80
	81	!- real :: nat_surf
	82	!- logical :: ok_flux_surf
	83	!- real :: fsens
	84	!- real :: flat
	85	!- real :: tsurf
	86	!- real :: rugos
	87	!- real :: qsol(1:2)
	88	!- real :: qsurf
	89	!- real :: psurf
	90	!- real :: zsurf
	91	!- real :: albedo
	92	!-
	93	!- real :: time = 0.
	94	!- real :: time_ini
	95	!- real :: xlat
	96	!- real :: xlon
	97	!- real :: wtsurf
	98	!- real :: wqsurf
	99	!- real :: restart_runoff
	100	!- real :: xagesno
	101	!- real :: qsolinp
	102	!- real :: zpicinp
	103	!-
	104	real :: fnday
	105	real :: day, daytime
	106	real :: day1
	107	real :: heure
	108	integer :: jour
	109	integer :: mois
	110	integer :: an
	111
	112	!---------------------------------------------------------------------
	113	! Declarations related to forcing and initial profiles
	114	!---------------------------------------------------------------------
	115
	116	integer :: kmax = llm
	117	integer llm700,nq1,nq2
	118	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
	119	real timestep, frac
	120	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
	121	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
	122	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
	123	real dqtdxls(nlev_max),dqtdyls(nlev_max)
	124	real dqtdtls(nlev_max),thlpcar(nlev_max)
	125	real qprof(nlev_max,nqmx)
	126
	127	! integer :: forcing_type
	128	logical :: forcing_les = .false.
	129	logical :: forcing_armcu = .false.
	130	logical :: forcing_rico = .false.
	131	logical :: forcing_radconv = .false.
	132	logical :: forcing_toga = .false.
	133	logical :: forcing_twpice = .false.
	134	logical :: forcing_amma = .false.
[2126]	135	logical :: forcing_dice = .false.
[2672]	136	logical :: forcing_gabls4 = .false.
	137
[2019]	138	logical :: forcing_GCM2SCM = .false.
	139	logical :: forcing_GCSSold = .false.
	140	logical :: forcing_sandu = .false.
	141	logical :: forcing_astex = .false.
	142	logical :: forcing_fire = .false.
[2191]	143	logical :: forcing_case = .false.
[2716]	144	logical :: forcing_case2 = .false.
[2019]	145	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
	146	! (cf read_tsurf1d.F)
	147
	148	!vertical advection computation
	149	! real d_t_z(llm), d_q_z(llm)
[2393]	150	! real d_t_dyn_z(llm), dq_dyn_z(llm)
[2019]	151	! real zz(llm)
	152	! real zfact
	153
	154	!flag forcings
	155	logical :: nudge_wind=.true.
	156	logical :: nudge_thermo=.false.
	157	logical :: cptadvw=.true.
	158	!=====================================================================
	159	! DECLARATIONS FOR EACH CASE
	160	!=====================================================================
	161	!
	162	#include "1D_decl_cases.h"
	163	!
	164	!---------------------------------------------------------------------
[2181]	165	! Declarations related to nudging
	166	!---------------------------------------------------------------------
	167	integer :: nudge_max
	168	parameter (nudge_max=9)
	169	integer :: inudge_RHT=1
	170	integer :: inudge_UV=2
	171	logical :: nudge(nudge_max)
	172	real :: t_targ(llm)
	173	real :: rh_targ(llm)
	174	real :: u_targ(llm)
	175	real :: v_targ(llm)
	176	!
	177	!---------------------------------------------------------------------
[2019]	178	! Declarations related to vertical discretization:
	179	!---------------------------------------------------------------------
	180	real :: pzero=1.e5
	181	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
[2672]	182	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
[2019]	183
	184	!---------------------------------------------------------------------
	185	! Declarations related to variables
	186	!---------------------------------------------------------------------
	187
	188	real :: phi(llm)
	189	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
[2335]	190	REAL rot(1, llm) ! relative vorticity, in s-1
[2019]	191	real :: rlat_rad(1),rlon_rad(1)
	192	real :: omega(llm+1),omega2(llm),rho(llm+1)
	193	real :: ug(llm),vg(llm),fcoriolis
	194	real :: sfdt, cfdt
	195	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
	196	real :: dt_dyn(llm)
[2920]	197	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
[2181]	198	real :: d_u_nudge(llm),d_v_nudge(llm)
[2191]	199	real :: du_adv(llm),dv_adv(llm)
[2373]	200	real :: du_age(llm),dv_age(llm)
[2019]	201	real :: alpha
	202	real :: ttt
	203
	204	REAL, ALLOCATABLE, DIMENSION(:,:):: q
	205	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
	206	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
	207	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
[2181]	208	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
[2933]	209	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
[2019]	210
	211	!---------------------------------------------------------------------
	212	! Initialization of surface variables
	213	!---------------------------------------------------------------------
	214	real :: run_off_lic_0(1)
	215	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
	216	real :: tsoil(1,nsoilmx,nbsrf)
[2244]	217	! real :: agesno(1,nbsrf)
[2019]	218
	219	!---------------------------------------------------------------------
	220	! Call to phyredem
	221	!---------------------------------------------------------------------
	222	logical :: ok_writedem =.true.
[2126]	223	real :: sollw_in = 0.
	224	real :: solsw_in = 0.
[2019]	225
	226	!---------------------------------------------------------------------
	227	! Call to physiq
	228	!---------------------------------------------------------------------
	229	logical :: firstcall=.true.
	230	logical :: lastcall=.false.
[2418]	231	real :: phis(1) = 0.0
	232	real :: dpsrf(1)
[2019]	233
	234	!---------------------------------------------------------------------
	235	! Initializations of boundary conditions
	236	!---------------------------------------------------------------------
	237	integer, parameter :: yd = 360
	238	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
	239	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
	240	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
	241	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
	242	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
	243	real :: phy_ice (yd) = 0.0 ! Fraction de glace
	244	real :: phy_fter(yd) = 0.0 ! Fraction de terre
	245	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
	246	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
	247	real :: phy_flic(yd) = 0.0 ! Fraction de glace
	248
	249	!---------------------------------------------------------------------
	250	! Fichiers et d'autres variables
	251	!---------------------------------------------------------------------
	252	integer :: k,l,i,it=1,mxcalc
[2565]	253	integer :: nsrf
[2181]	254	integer jcode
[2019]	255	INTEGER read_climoz
[2611]	256	!
	257	integer :: it_end ! iteration number of the last call
[2019]	258	!Al1
	259	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
	260	data ecrit_slab_oc/-1/
[2611]	261	!
	262	! if flag_inhib_forcing = 0, tendencies of forcing are added
	263	! <> 0, tendencies of forcing are not added
	264	INTEGER :: flag_inhib_forcing = 0
[2019]	265
	266	!=====================================================================
	267	! INITIALIZATIONS
	268	!=====================================================================
[2373]	269	du_phys(:)=0.
	270	dv_phys(:)=0.
	271	dt_phys(:)=0.
	272	dt_dyn(:)=0.
	273	dt_cooling(:)=0.
[2920]	274	d_t_adv(:)=0.
[2373]	275	d_t_nudge(:)=0.
	276	d_u_nudge(:)=0.
	277	d_v_nudge(:)=0.
	278	du_adv(:)=0.
	279	dv_adv(:)=0.
	280	du_age(:)=0.
	281	dv_age(:)=0.
	282
[2019]	283	! Initialization of Common turb_forcing
	284	dtime_frcg = 0.
	285	Turb_fcg_gcssold=.false.
	286	hthturb_gcssold = 0.
	287	hqturb_gcssold = 0.
	288
[3223]	289
	290
	291
[2019]	292	!---------------------------------------------------------------------
	293	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
	294	!---------------------------------------------------------------------
	295	!Al1
	296	call conf_unicol
	297	!Al1 moves this gcssold var from common fcg_gcssold to
	298	Turb_fcg_gcssold = xTurb_fcg_gcssold
	299	! --------------------------------------------------------------------
	300	close(1)
	301	!Al1
	302	write(,) 'lmdz1d.def lu => unicol.def'
	303
	304	! forcing_type defines the way the SCM is forced:
	305	!forcing_type = 0 ==> forcing_les = .true.
	306	! initial profiles from file prof.inp.001
	307	! no forcing by LS convergence ;
	308	! surface temperature imposed ;
	309	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
	310	!forcing_type = 1 ==> forcing_radconv = .true.
	311	! idem forcing_type = 0, but the imposed radiative cooling
	312	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
	313	! then there is no radiative cooling at all)
	314	!forcing_type = 2 ==> forcing_toga = .true.
	315	! initial profiles from TOGA-COARE IFA files
	316	! LS convergence and SST imposed from TOGA-COARE IFA files
	317	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
	318	! initial profiles from the GCM output
	319	! LS convergence imposed from the GCM output
	320	!forcing_type = 4 ==> forcing_twpice = .true.
	321	! initial profiles from TWP-ICE cdf file
	322	! LS convergence, omega and SST imposed from TWP-ICE files
	323	!forcing_type = 5 ==> forcing_rico = .true.
	324	! initial profiles from RICO files
	325	! LS convergence imposed from RICO files
	326	!forcing_type = 6 ==> forcing_amma = .true.
	327	! initial profiles from AMMA nc file
	328	! LS convergence, omega and surface fluxes imposed from AMMA file
[2126]	329	!forcing_type = 7 ==> forcing_dice = .true.
	330	! initial profiles and large scale forcings in dice_driver.nc
	331	! Different stages: soil model alone, atm. model alone
	332	! then both models coupled
[2672]	333	!forcing_type = 8 ==> forcing_gabls4 = .true.
	334	! initial profiles and large scale forcings in gabls4_driver.nc
[2332]	335	!forcing_type >= 100 ==> forcing_case = .true.
[2191]	336	! initial profiles and large scale forcings in cas.nc
	337	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
[2332]	338	! 101=cindynamo
	339	! 102=bomex
[2716]	340	!forcing_type >= 100 ==> forcing_case2 = .true.
	341	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
	342	! 103=arm_cu2 ie arm_cu with new forcing format
	343	! 104=rico2 ie rico with new forcing format
[2019]	344	!forcing_type = 40 ==> forcing_GCSSold = .true.
	345	! initial profile from GCSS file
	346	! LS convergence imposed from GCSS file
	347	!forcing_type = 50 ==> forcing_fire = .true.
	348	! forcing from fire.nc
	349	!forcing_type = 59 ==> forcing_sandu = .true.
	350	! initial profiles from sanduref file: see prof.inp.001
	351	! SST varying with time and divergence constante: see ifa_sanduref.txt file
	352	! Radiation has to be computed interactively
	353	!forcing_type = 60 ==> forcing_astex = .true.
	354	! initial profiles from file: see prof.inp.001
	355	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
	356	! Radiation has to be computed interactively
	357	!forcing_type = 61 ==> forcing_armcu = .true.
	358	! initial profiles from file: see prof.inp.001
	359	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
	360	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
	361	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
	362	! Radiation to be switched off
	363	!
[2983]	364	if (forcing_type <=0) THEN
[2019]	365	forcing_les = .true.
	366	elseif (forcing_type .eq.1) THEN
	367	forcing_radconv = .true.
	368	elseif (forcing_type .eq.2) THEN
	369	forcing_toga = .true.
	370	elseif (forcing_type .eq.3) THEN
	371	forcing_GCM2SCM = .true.
	372	elseif (forcing_type .eq.4) THEN
	373	forcing_twpice = .true.
	374	elseif (forcing_type .eq.5) THEN
	375	forcing_rico = .true.
	376	elseif (forcing_type .eq.6) THEN
	377	forcing_amma = .true.
[2126]	378	elseif (forcing_type .eq.7) THEN
	379	forcing_dice = .true.
[2672]	380	elseif (forcing_type .eq.8) THEN
	381	forcing_gabls4 = .true.
[2332]	382	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
[2191]	383	forcing_case = .true.
[2332]	384	year_ini_cas=2011
	385	mth_ini_cas=10
	386	day_deb=1
	387	heure_ini_cas=0.
	388	pdt_cas=3*3600. ! forcing frequency
	389	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
	390	forcing_case = .true.
	391	year_ini_cas=1969
	392	mth_ini_cas=6
	393	day_deb=24
	394	heure_ini_cas=0.
	395	pdt_cas=1800. ! forcing frequency
[2716]	396	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
	397	forcing_case2 = .true.
	398	year_ini_cas=1997
	399	mth_ini_cas=6
	400	day_deb=21
	401	heure_ini_cas=11.5
	402	pdt_cas=1800. ! forcing frequency
	403	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
	404	forcing_case2 = .true.
	405	year_ini_cas=2004
	406	mth_ini_cas=12
	407	day_deb=16
	408	heure_ini_cas=0.
	409	pdt_cas=1800. ! forcing frequency
[2920]	410	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
	411	forcing_case2 = .true.
	412	year_ini_cas=1969
	413	mth_ini_cas=6
	414	day_deb=24
	415	heure_ini_cas=0.
	416	pdt_cas=1800. ! forcing frequency
[2983]	417	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
	418	forcing_case2 = .true.
	419	year_ini_cas=1992
	420	mth_ini_cas=11
	421	day_deb=6
	422	heure_ini_cas=10.
	423	pdt_cas=86400. ! forcing frequency
[2019]	424	elseif (forcing_type .eq.40) THEN
	425	forcing_GCSSold = .true.
	426	elseif (forcing_type .eq.50) THEN
	427	forcing_fire = .true.
	428	elseif (forcing_type .eq.59) THEN
	429	forcing_sandu = .true.
	430	elseif (forcing_type .eq.60) THEN
	431	forcing_astex = .true.
	432	elseif (forcing_type .eq.61) THEN
	433	forcing_armcu = .true.
	434	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
	435	else
	436	write (,) 'ERROR : unknown forcing_type ', forcing_type
	437	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
	438	ENDIF
	439	print*,"forcing type=",forcing_type
	440
	441	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
	442	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
	443	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
	444	! through the common sst_forcing.
	445
	446	type_ts_forcing = 0
[2126]	447	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
[2019]	448	& type_ts_forcing = 1
[2181]	449	!
	450	! Initialization of the logical switch for nudging
	451	jcode = iflag_nudge
	452	do i = 1,nudge_max
	453	nudge(i) = mod(jcode,10) .ge. 1
	454	jcode = jcode/10
	455	enddo
[2019]	456	!---------------------------------------------------------------------
	457	! Definition of the run
	458	!---------------------------------------------------------------------
	459
[2221]	460	call conf_gcm( 99, .TRUE. )
[2019]	461	!-----------------------------------------------------------------------
	462	! Choix du calendrier
	463	! -------------------
	464
	465	! calend = 'earth_365d'
	466	if (calend == 'earth_360d') then
	467	call ioconf_calendar('360d')
	468	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
	469	else if (calend == 'earth_365d') then
	470	call ioconf_calendar('noleap')
	471	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
	472	else if (calend == 'earth_366d') then
	473	call ioconf_calendar('all_leap')
	474	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
	475	else if (calend == 'gregorian') then
	476	call ioconf_calendar('gregorian') ! not to be used by normal users
	477	write(,)'CALENDRIER CHOISI: Gregorien'
	478	else
	479	write (,) 'ERROR : unknown calendar ', calend
	480	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
	481	endif
	482	!-----------------------------------------------------------------------
	483	!
	484	!c Date :
	485	! La date est supposee donnee sous la forme [annee, numero du jour dans
	486	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
	487	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
	488	! Le numero du jour est dans "day". L heure est traitee separement.
	489	! La date complete est dans "daytime" (l'unite est le jour).
	490	if (nday>0) then
	491	fnday=nday
	492	else
	493	fnday=-nday/float(day_step)
	494	endif
[2332]	495	print *,'fnday=',fnday
[2716]	496	! start_time doit etre en FRACTION DE JOUR
[2465]	497	start_time=time_ini/24.
	498
[2019]	499	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
	500	IF(forcing_type .EQ. 61) fnday=53100./86400.
[2716]	501	IF(forcing_type .EQ. 103) fnday=53100./86400.
[2019]	502	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
	503	IF(forcing_type .EQ. 6) fnday=64800./86400.
[2126]	504	! IF(forcing_type .EQ. 6) fnday=50400./86400.
[2672]	505	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
[2019]	506	annee_ref = anneeref
	507	mois = 1
	508	day_ref = dayref
	509	heure = 0.
	510	itau_dyn = 0
	511	itau_phy = 0
	512	call ymds2ju(annee_ref,mois,day_ref,heure,day)
	513	day_ini = int(day)
[3316]	514	day_end = day_ini + int(fnday)
[2019]	515
	516	IF (forcing_type .eq.2) THEN
	517	! Convert the initial date of Toga-Coare to Julian day
	518	call ymds2ju &
	519	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
	520
	521	ELSEIF (forcing_type .eq.4) THEN
	522	! Convert the initial date of TWPICE to Julian day
	523	call ymds2ju &
	524	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
	525	& ,day_ju_ini_twpi)
	526	ELSEIF (forcing_type .eq.6) THEN
	527	! Convert the initial date of AMMA to Julian day
	528	call ymds2ju &
	529	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
	530	& ,day_ju_ini_amma)
[2126]	531	ELSEIF (forcing_type .eq.7) THEN
	532	! Convert the initial date of DICE to Julian day
	533	call ymds2ju &
	534	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
	535	& ,day_ju_ini_dice)
[2672]	536	ELSEIF (forcing_type .eq.8 ) THEN
	537	! Convert the initial date of GABLS4 to Julian day
	538	call ymds2ju &
	539	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
	540	& ,day_ju_ini_gabls4)
[2332]	541	ELSEIF (forcing_type .gt.100) THEN
[2191]	542	! Convert the initial date to Julian day
[2332]	543	day_ini_cas=day_deb
	544	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
[2191]	545	call ymds2ju &
[2716]	546	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
[2191]	547	& ,day_ju_ini_cas)
[2332]	548	print*,'time case 2',day_ini_cas,day_ju_ini_cas
[2019]	549	ELSEIF (forcing_type .eq.59) THEN
	550	! Convert the initial date of Sandu case to Julian day
	551	call ymds2ju &
	552	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
	553	& time_ini*3600.,day_ju_ini_sandu)
	554
	555	ELSEIF (forcing_type .eq.60) THEN
	556	! Convert the initial date of Astex case to Julian day
	557	call ymds2ju &
	558	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
	559	& time_ini*3600.,day_ju_ini_astex)
	560
	561	ELSEIF (forcing_type .eq.61) THEN
	562	! Convert the initial date of Arm_cu case to Julian day
	563	call ymds2ju &
	564	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
	565	& ,day_ju_ini_armcu)
	566	ENDIF
	567
[2716]	568	IF (forcing_type .gt.100) THEN
	569	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
	570	ELSE
[2019]	571	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
[2716]	572	ENDIF
[2019]	573	! Print out the actual date of the beginning of the simulation :
	574	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
	575	print *,' Time of beginning : ', &
	576	& year_print, month_print, day_print, sec_print
	577
	578	!---------------------------------------------------------------------
	579	! Initialization of dimensions, geometry and initial state
	580	!---------------------------------------------------------------------
[2351]	581	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
[2354]	582	! but we still need to initialize dimphy module (klon,klev,etc.) here.
	583	call init_dimphy(1,llm)
[2019]	584	call suphel
	585	call infotrac_init
	586
[3316]	587	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
[2019]	588	allocate(q(llm,nqtot)) ; q(:,:)=0.
	589	allocate(dq(llm,nqtot))
	590	allocate(dq_dyn(llm,nqtot))
	591	allocate(d_q_adv(llm,nqtot))
[2181]	592	allocate(d_q_nudge(llm,nqtot))
[2933]	593	! allocate(d_th_adv(llm))
[2019]	594
[2393]	595	q(:,:) = 0.
	596	dq(:,:) = 0.
	597	dq_dyn(:,:) = 0.
	598	d_q_adv(:,:) = 0.
	599	d_q_nudge(:,:) = 0.
	600
[2019]	601	!
	602	! No ozone climatology need be read in this pre-initialization
	603	! (phys_state_var_init is called again in physiq)
	604	read_climoz = 0
	605	!
	606	call phys_state_var_init(read_climoz)
	607
	608	if (ngrid.ne.klon) then
	609	print*,'stop in inifis'
	610	print*,'Probleme de dimensions :'
	611	print*,'ngrid = ',ngrid
	612	print*,'klon = ',klon
	613	stop
	614	endif
	615	!!!=====================================================================
	616	!!! Feedback forcing values for Gateaux differentiation (al1)
	617	!!!=====================================================================
	618	!!! Surface Planck forcing bracketing call radiation
	619	!! surf_Planck = 0.
	620	!! surf_Conv = 0.
	621	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
	622	!!! a mettre dans le lmdz1d.def ou autre
	623	!!
	624	!!
	625	qsol = qsolinp
	626	qsurf = fq_sat(tsurf,psurf/100.)
	627	day1= day_ini
	628	time=daytime-day
	629	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
	630	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
	631
	632	!
	633	!! mpl et jyg le 22/08/2012 :
	634	!! pour que les cas a flux de surface imposes marchent
	635	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
	636	fsens=-wtsurfrcpdrho(1)
	637	flat=-wqsurfrlvttrho(1)
	638	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
	639	ENDIF
	640	print*,'Flux sol ',fsens,flat
	641	!! ok_flux_surf=.false.
	642	!! fsens=-wtsurfrcpdrho(1)
	643	!! flat=-wqsurfrlvttrho(1)
	644	!!!!
	645
	646	! Vertical discretization and pressure levels at half and mid levels:
	647
	648	pa = 5e4
	649	!! preff= 1.01325e5
	650	preff = psurf
	651	IF (ok_old_disvert) THEN
	652	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
	653	print *,'On utilise disvert0'
[2786]	654	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
	655	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
	656	scaleheight=8.
	657	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
[2019]	658	ELSE
[2040]	659	call disvert()
[2019]	660	print *,'On utilise disvert'
	661	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
	662	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
	663	ENDIF
[2786]	664
[2019]	665	sig_s=presnivs/preff
	666	plev =ap+bp*psurf
	667	play = 0.5*(plev(1:llm)+plev(2:llm+1))
[2373]	668	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
[2019]	669
	670	IF (forcing_type .eq. 59) THEN
	671	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
	672	write(,) '***********************'
	673	do l = 1, llm
	674	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
	675	if (trouve_700 .and. play(l).le.70000) then
	676	llm700=l
	677	print *,'llm700,play=',llm700,play(l)/100.
	678	trouve_700= .false.
	679	endif
	680	enddo
	681	write(,) '***********************'
	682	ENDIF
	683
	684	!
	685	!=====================================================================
	686	! EVENTUALLY, READ FORCING DATA :
	687	!=====================================================================
	688
	689	#include "1D_read_forc_cases.h"
	690
	691	if (forcing_GCM2SCM) then
	692	write (,) 'forcing_GCM2SCM not yet implemented'
	693	stop 'in initialization'
	694	endif ! forcing_GCM2SCM
	695
	696	print*,'mxcalc=',mxcalc
[2373]	697	! print*,'zlay=',zlay(mxcalc)
[2019]	698	print*,'play=',play(mxcalc)
	699
[2332]	700	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
[2019]	701	ts_cur = tsurf ! SST used in read_tsurf1d
	702	!=====================================================================
	703	! Initialisation de la physique :
	704	!=====================================================================
	705
	706	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
	707	!
	708	! day_step, iphysiq lus dans gcm.def ci-dessus
	709	! timestep: calcule ci-dessous from rday et day_step
	710	! ngrid=1
	711	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
	712	! rday: defini dans suphel.F (86400.)
	713	! day_ini: lu dans run.def (dayref)
	714	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
	715	! airefi,zcufi,zcvfi initialises au debut de ce programme
	716	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
	717	day_step = float(nsplit_phys)*day_step/float(iphysiq)
	718	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
	719	timestep =rday/day_step
	720	dtime_frcg = timestep
	721	!
	722	zcufi=airefi
	723	zcvfi=airefi
	724	!
[2403]	725	rlat_rad(1)=xlat*rpi/180.
	726	rlon_rad(1)=xlon*rpi/180.
[2019]	727
[2347]	728	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
	729	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
	730	! with '0.' when necessary
[2351]	731	call iniphysiq(iim,jjm,llm, &
	732	1,comm_lmdz, &
	733	rday,day_ini,timestep, &
[2347]	734	(/rlat_rad(1),0./),(/0./), &
	735	(/0.,0./),(/rlon_rad(1),0./), &
	736	(/ (/airefi,0./),(/0.,0./) /), &
	737	(/zcufi,0.,0.,0./), &
	738	(/zcvfi,0./), &
	739	ra,rg,rd,rcpd,1)
[2019]	740	print*,'apres iniphysiq'
	741
	742	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
	743	co2_ppm= 330.0
	744	solaire=1370.0
	745
	746	! Ecriture du startphy avant le premier appel a la physique.
	747	! On le met juste avant pour avoir acces a tous les champs
	748
	749	if (ok_writedem) then
	750
	751	!--------------------------------------------------------------------------
	752	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
	753	! need : qsol fder snow qsurf evap rugos agesno ftsoil
	754	!--------------------------------------------------------------------------
	755
	756	type_ocean = "force"
	757	run_off_lic_0(1) = restart_runoff
	758	call fonte_neige_init(run_off_lic_0)
	759
	760	fder=0.
[2672]	761	snsrf(1,:)=snowmass ! masse de neige des sous surface
[2019]	762	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
[2244]	763	fevap=0.
	764	z0m(1,:)=rugos ! couverture de neige des sous surface
[2672]	765	z0h(1,:)=rugosh ! couverture de neige des sous surface
[2019]	766	agesno = xagesno
	767	tsoil(:,:,:)=tsurf
	768	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
	769	! tsoil(1,1,1)=299.18
	770	! tsoil(1,2,1)=300.08
	771	! tsoil(1,3,1)=301.88
	772	! tsoil(1,4,1)=305.48
	773	! tsoil(1,5,1)=308.00
	774	! tsoil(1,6,1)=308.00
	775	! tsoil(1,7,1)=308.00
	776	! tsoil(1,8,1)=308.00
	777	! tsoil(1,9,1)=308.00
	778	! tsoil(1,10,1)=308.00
	779	! tsoil(1,11,1)=308.00
	780	!-----------------------------------------------------------------------
[2244]	781	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
[2019]	782
	783	!------------------ prepare limit conditions for limit.nc -----------------
	784	!-- Ocean force
	785
	786	print*,'avant phyredem'
	787	pctsrf(1,:)=0.
[2672]	788	if (nat_surf.eq.0.) then
[2019]	789	pctsrf(1,is_oce)=1.
	790	pctsrf(1,is_ter)=0.
[2672]	791	pctsrf(1,is_lic)=0.
	792	pctsrf(1,is_sic)=0.
	793	else if (nat_surf .eq. 1) then
[2019]	794	pctsrf(1,is_oce)=0.
	795	pctsrf(1,is_ter)=1.
[2672]	796	pctsrf(1,is_lic)=0.
	797	pctsrf(1,is_sic)=0.
	798	else if (nat_surf .eq. 2) then
	799	pctsrf(1,is_oce)=0.
	800	pctsrf(1,is_ter)=0.
	801	pctsrf(1,is_lic)=1.
	802	pctsrf(1,is_sic)=0.
	803	else if (nat_surf .eq. 3) then
	804	pctsrf(1,is_oce)=0.
	805	pctsrf(1,is_ter)=0.
	806	pctsrf(1,is_lic)=0.
	807	pctsrf(1,is_sic)=1.
[2019]	808
[2672]	809	end if
	810
	811
[2019]	812	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
	813	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
	814
	815	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
	816	zpic = zpicinp
	817	ftsol=tsurf
[2237]	818	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
	819	! 6 albedo, mais on peut quand meme tourner avec
	820	! moins. Seules les 2 ou 4 premiers seront lus
	821	falb_dir=albedo
	822	falb_dif=albedo
[2019]	823	rugoro=rugos
	824	t_ancien(1,:)=temp(:)
	825	q_ancien(1,:)=q(:,1)
[2933]	826	ql_ancien = 0.
	827	qs_ancien = 0.
	828	prlw_ancien = 0.
	829	prsw_ancien = 0.
	830	prw_ancien = 0.
[2565]	831	!jyg<
	832	!! pbl_tke(:,:,:)=1.e-8
	833	pbl_tke(:,:,:)=0.
	834	pbl_tke(:,2,:)=1.e-2
	835	PRINT *, ' pbl_tke dans lmdz1d '
[2611]	836	if (prt_level .ge. 5) then
	837	DO nsrf = 1,4
	838	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
	839	ENDDO
	840	end if
[2019]	841
[2565]	842	!>jyg
	843
[2019]	844	rain_fall=0.
	845	snow_fall=0.
	846	solsw=0.
	847	sollw=0.
[2393]	848	sollwdown=rsigmatsurf*4
[2019]	849	radsol=0.
	850	rnebcon=0.
	851	ratqs=0.
	852	clwcon=0.
[2393]	853	zmax0 = 0.
[2019]	854	zmea=0.
	855	zstd=0.
	856	zsig=0.
	857	zgam=0.
	858	zval=0.
	859	zthe=0.
	860	sig1=0.
	861	w01=0.
[2393]	862	wake_cstar = 0.
	863	wake_deltaq = 0.
	864	wake_deltat = 0.
[2565]	865	wake_delta_pbl_TKE(:,:,:) = 0.
[2393]	866	delta_tsurf = 0.
	867	wake_fip = 0.
	868	wake_pe = 0.
	869	wake_s = 0.
[2635]	870	wake_dens = 0.
[2393]	871	ale_bl = 0.
	872	ale_bl_trig = 0.
	873	alp_bl = 0.
	874	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
	875	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
	876	entr_therm = 0.
	877	detr_therm = 0.
	878	f0 = 0.
	879	fm_therm = 0.
[2019]	880	u_ancien(1,:)=u(:)
	881	v_ancien(1,:)=v(:)
	882
	883	!------------------------------------------------------------------------
	884	! Make file containing restart for the physics (startphy.nc)
	885	!
	886	! NB: List of the variables to be written by phyredem (via put_field):
	887	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
	888	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
[2243]	889	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
[2393]	890	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
[2019]	891	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
[2255]	892	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
	893	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
[2635]	894	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
	895	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
[2565]	896	!
	897	! NB2: The content of the startphy.nc file depends on some flags defined in
	898	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
	899	! to be set at some arbitratry convenient values.
[2019]	900	!------------------------------------------------------------------------
	901	!Al1 =============== restart option ==========================
	902	if (.not.restart) then
[2565]	903	iflag_pbl = 5
[2019]	904	call phyredem ("startphy.nc")
	905	else
	906	! (desallocations)
	907	print*,'callin surf final'
[2243]	908	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
[2019]	909	print*,'after surf final'
	910	CALL fonte_neige_final(run_off_lic_0)
	911	endif
	912
	913	ok_writedem=.false.
	914	print*,'apres phyredem'
	915
	916	endif ! ok_writedem
	917
	918	!------------------------------------------------------------------------
	919	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
	920	! --------------------------------------------------
	921	! NB: List of the variables to be written in limit.nc
	922	! (by writelim.F, subroutine of 1DUTILS.h):
	923	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
	924	! phy_fter,phy_foce,phy_flic,phy_fsic)
	925	!------------------------------------------------------------------------
	926	do i=1,yd
	927	phy_nat(i) = nat_surf
	928	phy_alb(i) = albedo
	929	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
	930	phy_rug(i) = rugos
	931	phy_fter(i) = pctsrf(1,is_ter)
	932	phy_foce(i) = pctsrf(1,is_oce)
	933	phy_fsic(i) = pctsrf(1,is_sic)
	934	phy_flic(i) = pctsrf(1,is_lic)
	935	enddo
	936
	937	! fabrication de limit.nc
	938	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
	939	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
	940
	941
	942	call phys_state_var_end
	943	!Al1
	944	if (restart) then
	945	print*,'call to restart dyn 1d'
	946	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
	947	& u,v,temp,q,omega2)
	948
	949	print*,'fnday,annee_ref,day_ref,day_ini', &
	950	& fnday,annee_ref,day_ref,day_ini
	951	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
	952	day = day_ini
	953	day_end = day_ini + nday
	954	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	955
	956	! Print out the actual date of the beginning of the simulation :
	957	call ju2ymds(daytime, an, mois, jour, heure)
	958	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
	959
	960	day = int(daytime)
	961	time=daytime-day
	962
	963	print,'*** intialised fields from restart1dyn *****'
	964	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
	965	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
	966	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
	967	! raz for safety
	968	do l=1,llm
	969	dq_dyn(l,1) = 0.
	970	enddo
	971	endif
	972	!Al1 ================ end restart =================================
	973	IF (ecrit_slab_oc.eq.1) then
	974	open(97,file='div_slab.dat',STATUS='UNKNOWN')
	975	elseif (ecrit_slab_oc.eq.0) then
	976	open(97,file='div_slab.dat',STATUS='OLD')
	977	endif
[2181]	978	!
	979	!---------------------------------------------------------------------
	980	! Initialize target profile for RHT nudging if needed
	981	!---------------------------------------------------------------------
	982	if (nudge(inudge_RHT)) then
	983	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
	984	endif
	985	if (nudge(inudge_UV)) then
	986	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
	987	endif
	988	!
[2019]	989	!=====================================================================
[3223]	990	CALL iophys_ini
[2019]	991	! START OF THE TEMPORAL LOOP :
	992	!=====================================================================
	993
[2611]	994	it_end = nint(fnday*day_step)
	995	!test JLD it_end = 10
	996	do while(it.le.it_end)
[2019]	997
	998	if (prt_level.ge.1) then
	999	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
[2611]	1000	& it,day,time,it_end,day_step
[2019]	1001	print*,'PAS DE TEMPS ',timestep
	1002	endif
	1003	!Al1 demande de restartphy.nc
[2611]	1004	if (it.eq.it_end) lastcall=.True.
[2019]	1005
	1006	!---------------------------------------------------------------------
	1007	! Interpolation of forcings in time and onto model levels
	1008	!---------------------------------------------------------------------
	1009
	1010	#include "1D_interp_cases.h"
	1011
	1012	if (forcing_GCM2SCM) then
	1013	write (,) 'forcing_GCM2SCM not yet implemented'
	1014	stop 'in time loop'
	1015	endif ! forcing_GCM2SCM
	1016
	1017	!---------------------------------------------------------------------
	1018	! Geopotential :
	1019	!---------------------------------------------------------------------
	1020
	1021	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
	1022	do l = 1, llm-1
	1023	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	1024	& (play(l)-play(l+1))/(play(l)+play(l+1))
	1025	enddo
	1026
	1027	!---------------------------------------------------------------------
	1028	! Listing output for debug prt_level>=1
	1029	!---------------------------------------------------------------------
	1030	if (prt_level>=1) then
	1031	print *,' avant physiq : -------- day time ',day,time
	1032	write(,) 'firstcall,lastcall,phis', &
	1033	& firstcall,lastcall,phis
[2611]	1034	end if
	1035	if (prt_level>=5) then
[2019]	1036	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
	1037	& 'presniv','plev','play','phi'
	1038	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
	1039	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1040	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
	1041	& 'presniv','u','v','temp','q1','q2','omega2'
	1042	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
	1043	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1044	endif
	1045
	1046	!---------------------------------------------------------------------
	1047	! Call physiq :
	1048	!---------------------------------------------------------------------
[2335]	1049	call physiq(ngrid,llm, &
[2600]	1050	firstcall,lastcall,timestep, &
	1051	plev,play,phi,phis,presnivs, &
	1052	u,v, rot, temp,q,omega2, &
	1053	du_phys,dv_phys,dt_phys,dq,dpsrf)
	1054	firstcall=.false.
[2019]	1055
	1056	!---------------------------------------------------------------------
[2611]	1057	! Listing output for debug
[2019]	1058	!---------------------------------------------------------------------
[2611]	1059	if (prt_level>=5) then
[2019]	1060	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
	1061	& 'presniv','plev','play','phi'
	1062	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
	1063	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1064	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
	1065	& 'presniv','u','v','temp','q1','q2','omega2'
	1066	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
	1067	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1068	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
	1069	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
	1070	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
	1071	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
	1072	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
	1073	write(,) 'dpsrf',dpsrf
	1074	endif
	1075	!---------------------------------------------------------------------
	1076	! Add physical tendencies :
	1077	!---------------------------------------------------------------------
	1078
	1079	fcoriolis=2.sin(rpixlat/180.)*romega
	1080	if (forcing_radconv .or. forcing_fire) then
	1081	fcoriolis=0.0
	1082	dt_cooling=0.0
[2920]	1083	d_t_adv=0.0
[2019]	1084	d_q_adv=0.0
	1085	endif
[2393]	1086	! print*, 'calcul de fcoriolis ', fcoriolis
[2019]	1087
	1088	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
[2716]	1089	& .or.forcing_amma .or. forcing_type.eq.101) then
[2019]	1090	fcoriolis=0.0 ; ug=0. ; vg=0.
	1091	endif
[2716]	1092
	1093	if(forcing_rico) then
[2019]	1094	dt_cooling=0.
[2716]	1095	endif
[2019]	1096
[2983]	1097	!CRio:Attention modif sp??cifique cas de Caroline
	1098	if (forcing_type==-1) then
[2933]	1099	fcoriolis=0.
	1100	!Nudging
	1101
	1102	!on calcule dt_cooling
	1103	do l=1,llm
	1104	if (play(l).ge.20000.) then
	1105	dt_cooling(l)=-1.5/86400.
	1106	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
	1107	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
	1108	else
	1109	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
	1110	endif
	1111	enddo
	1112
	1113	endif
	1114	!RC
[3223]	1115	if (forcing_sandu) then
	1116	ug(1:llm)=u_mod(1:llm)
	1117	vg(1:llm)=v_mod(1:llm)
	1118	endif
[2933]	1119
[2611]	1120	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
[2393]	1121	fcoriolis, xlat,mxcalc
[2019]	1122
[2393]	1123	! print *,'u-ug=',u-ug
[2019]	1124
	1125	!!!!!!!!!!!!!!!!!!!!!!!!
	1126	! Geostrophic wind
[3223]	1127	! Le calcul ci dessous est insuffisamment precis
	1128	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1129	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
[2019]	1130	!!!!!!!!!!!!!!!!!!!!!!!!
	1131	sfdt = sin(0.5fcoriolistimestep)
	1132	cfdt = cos(0.5fcoriolistimestep)
[2393]	1133	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
[2019]	1134	!
	1135	du_age(1:mxcalc)= -2.sfdt/timestep &
	1136	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
	1137	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1138	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1139	!
	1140	dv_age(1:mxcalc)= -2.sfdt/timestep &
	1141	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
	1142	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1143	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1144	!
[2181]	1145	!!!!!!!!!!!!!!!!!!!!!!!!
	1146	! Nudging
	1147	!!!!!!!!!!!!!!!!!!!!!!!!
	1148	d_t_nudge(:) = 0.
	1149	d_q_nudge(:,:) = 0.
	1150	d_u_nudge(:) = 0.
	1151	d_v_nudge(:) = 0.
	1152	if (nudge(inudge_RHT)) then
	1153	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
	1154	& d_t_nudge,d_q_nudge(:,1))
	1155	endif
	1156	if (nudge(inudge_UV)) then
	1157	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
	1158	& d_u_nudge,d_v_nudge)
	1159	endif
	1160	!
[2019]	1161	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1162	! call writefield_phy('dv_age' ,dv_age,llm)
	1163	! call writefield_phy('du_age' ,du_age,llm)
	1164	! call writefield_phy('du_phys' ,du_phys,llm)
	1165	! call writefield_phy('u_tend' ,u,llm)
	1166	! call writefield_phy('u_g' ,ug,llm)
	1167	!
	1168	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1169	!! Increment state variables
	1170	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2611]	1171	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
	1172
[2019]	1173	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
	1174	! au dessus de 700hpa, on relaxe vers les profils initiaux
	1175	if (forcing_sandu .OR. forcing_astex) then
	1176	#include "1D_nudge_sandu_astex.h"
	1177	else
	1178	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
	1179	& du_phys(1:mxcalc) &
[2191]	1180	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
[2181]	1181	& +d_u_nudge(1:mxcalc) )
[2019]	1182	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
	1183	& dv_phys(1:mxcalc) &
[2191]	1184	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
[2181]	1185	& +d_v_nudge(1:mxcalc) )
[2019]	1186	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
	1187	& dq(1:mxcalc,:) &
[2181]	1188	& +d_q_adv(1:mxcalc,:) &
	1189	& +d_q_nudge(1:mxcalc,:) )
[2019]	1190
[2611]	1191	if (prt_level.ge.3) then
[2019]	1192	print *, &
[2920]	1193	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
	1194	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
[2373]	1195	print* ,'dv_phys=',dv_phys
	1196	print* ,'dv_age=',dv_age
	1197	print* ,'dv_adv=',dv_adv
	1198	print* ,'d_v_nudge=',d_v_nudge
[2019]	1199	print*, v
	1200	print*, vg
	1201	endif
	1202
	1203	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
	1204	& dt_phys(1:mxcalc) &
[2920]	1205	& +d_t_adv(1:mxcalc) &
[2181]	1206	& +d_t_nudge(1:mxcalc) &
[2019]	1207	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
	1208
	1209	endif ! forcing_sandu or forcing_astex
	1210
	1211	teta=temp(pzero/play)*rkappa
	1212	!
	1213	!---------------------------------------------------------------------
	1214	! Nudge soil temperature if requested
	1215	!---------------------------------------------------------------------
	1216
[2565]	1217	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
[2019]	1218	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
	1219	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
	1220	ENDIF
	1221
	1222	!---------------------------------------------------------------------
	1223	! Add large-scale tendencies (advection, etc) :
	1224	!---------------------------------------------------------------------
	1225
	1226	!cc nrlmd
	1227	!cc tmpvar=teta
	1228	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1229	!cc
	1230	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
	1231	!cc tmpvar(:)=q(:,1)
	1232	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1233	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
	1234	!cc tmpvar(:)=q(:,2)
	1235	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1236	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
	1237
[2611]	1238	END IF ! end if tendency of tendency should be added
	1239
[2019]	1240	!---------------------------------------------------------------------
	1241	! Air temperature :
	1242	!---------------------------------------------------------------------
	1243	if (lastcall) then
	1244	print*,'Pas de temps final ',it
	1245	call ju2ymds(daytime, an, mois, jour, heure)
	1246	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
	1247	endif
	1248
	1249	! incremente day time
	1250	! print*,'daytime bef',daytime,1./day_step
	1251	daytime = daytime+1./day_step
	1252	!Al1dbg
	1253	day = int(daytime+0.1/day_step)
	1254	! time = max(daytime-day,0.0)
	1255	!Al1&jyg: correction de bug
	1256	!cc time = real(mod(it,day_step))/day_step
	1257	time = time_ini/24.+real(mod(it,day_step))/day_step
	1258	! print*,'daytime nxt time',daytime,time
	1259	it=it+1
	1260
	1261	enddo
	1262
	1263	!Al1
	1264	if (ecrit_slab_oc.ne.-1) close(97)
	1265
	1266	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
	1267	! -------------------------------------
	1268	call dyn1dredem("restart1dyn.nc", &
	1269	& plev,play,phi,phis,presnivs, &
	1270	& u,v,temp,q,omega2)
	1271
	1272	CALL abort_gcm ('lmdz1d ','The End ',0)
	1273
	1274	end
	1275
	1276	#include "1DUTILS.h"
	1277	#include "1Dconv.h"
	1278
[2239]	1279	!#endif
[2019]	1280
[2716]	1281

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format