Context Navigation

lmdz1d.F90 @ 3442

Last change on this file since 3442 was 3442, checked in by Laurent Fairhead, 5 years ago
Following merging of DYNAMICO/LMDZ branches, modifications needed for the 1D LMDZ model Added a 1D special version of dimphy which is called before the real dimphy in lmdz1d MPL
Property svn:keywords set to `Id`
File size: 47.6 KB

Line
1	!
2	! $Id: lmdz1d.F90 3442 2019-01-25 10:12:29Z fairhead $
3	!
4	!#ifdef CPP_1D
5	!#include "../dyn3d/mod_const_mpi.F90"
6	!#include "../dyn3d_common/control_mod.F90"
7	!#include "../dyn3d_common/infotrac.F90"
8	!#include "../dyn3d_common/disvert.F90"
9
10
11	PROGRAM lmdz1d
12
13	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
14	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
15	clwcon, detr_therm, &
16	qsol, fevap, z0m, z0h, agesno, &
17	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
18	falb_dir, falb_dif, &
19	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
20	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
21	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
22	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
23	wake_deltaq, wake_deltat, wake_s, wake_dens, &
24	zgam, zmax0, zmea, zpic, zsig, &
25	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
26	prlw_ancien, prsw_ancien, prw_ancien
27
28	USE dimphy
29	USE surface_data, only : type_ocean,ok_veget
30	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
31	pbl_surface_final
32	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
33
34	USE infotrac ! new
35	USE control_mod
36	USE indice_sol_mod
37	USE phyaqua_mod
38	! USE mod_1D_cases_read
39	USE mod_1D_cases_read2
40	USE mod_1D_amma_read
41	USE print_control_mod, ONLY: lunout, prt_level
42	USE iniphysiq_mod, ONLY: iniphysiq
43	USE mod_const_mpi, ONLY: comm_lmdz
44	USE physiq_mod, ONLY: physiq
45	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
46	preff, aps, bps, pseudoalt, scaleheight
47	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
48	itau_dyn, itau_phy, start_time
49
50	implicit none
51	#include "dimensions.h"
52	#include "YOMCST.h"
53	!!#include "control.h"
54	#include "clesphys.h"
55	#include "dimsoil.h"
56	!#include "indicesol.h"
57
58	#include "compar1d.h"
59	#include "flux_arp.h"
60	#include "date_cas.h"
61	#include "tsoilnudge.h"
62	#include "fcg_gcssold.h"
63	!!!#include "fbforcing.h"
64	#include "compbl.h"
65
66	!=====================================================================
67	! DECLARATIONS
68	!=====================================================================
69
70	!---------------------------------------------------------------------
71	! Externals
72	!---------------------------------------------------------------------
73	external fq_sat
74	real fq_sat
75
76	!---------------------------------------------------------------------
77	! Arguments d' initialisations de la physique (USER DEFINE)
78	!---------------------------------------------------------------------
79
80	integer, parameter :: ngrid=1
81	real :: zcufi = 1.
82	real :: zcvfi = 1.
83
84	!- real :: nat_surf
85	!- logical :: ok_flux_surf
86	!- real :: fsens
87	!- real :: flat
88	!- real :: tsurf
89	!- real :: rugos
90	!- real :: qsol(1:2)
91	!- real :: qsurf
92	!- real :: psurf
93	!- real :: zsurf
94	!- real :: albedo
95	!-
96	!- real :: time = 0.
97	!- real :: time_ini
98	!- real :: xlat
99	!- real :: xlon
100	!- real :: wtsurf
101	!- real :: wqsurf
102	!- real :: restart_runoff
103	!- real :: xagesno
104	!- real :: qsolinp
105	!- real :: zpicinp
106	!-
107	real :: fnday
108	real :: day, daytime
109	real :: day1
110	real :: heure
111	integer :: jour
112	integer :: mois
113	integer :: an
114
115	!---------------------------------------------------------------------
116	! Declarations related to forcing and initial profiles
117	!---------------------------------------------------------------------
118
119	integer :: kmax = llm
120	integer llm700,nq1,nq2
121	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
122	real timestep, frac
123	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
124	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
125	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
126	real dqtdxls(nlev_max),dqtdyls(nlev_max)
127	real dqtdtls(nlev_max),thlpcar(nlev_max)
128	real qprof(nlev_max,nqmx)
129
130	! integer :: forcing_type
131	logical :: forcing_les = .false.
132	logical :: forcing_armcu = .false.
133	logical :: forcing_rico = .false.
134	logical :: forcing_radconv = .false.
135	logical :: forcing_toga = .false.
136	logical :: forcing_twpice = .false.
137	logical :: forcing_amma = .false.
138	logical :: forcing_dice = .false.
139	logical :: forcing_gabls4 = .false.
140
141	logical :: forcing_GCM2SCM = .false.
142	logical :: forcing_GCSSold = .false.
143	logical :: forcing_sandu = .false.
144	logical :: forcing_astex = .false.
145	logical :: forcing_fire = .false.
146	logical :: forcing_case = .false.
147	logical :: forcing_case2 = .false.
148	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
149	! (cf read_tsurf1d.F)
150
151	!vertical advection computation
152	! real d_t_z(llm), d_q_z(llm)
153	! real d_t_dyn_z(llm), dq_dyn_z(llm)
154	! real zz(llm)
155	! real zfact
156
157	!flag forcings
158	logical :: nudge_wind=.true.
159	logical :: nudge_thermo=.false.
160	logical :: cptadvw=.true.
161	!=====================================================================
162	! DECLARATIONS FOR EACH CASE
163	!=====================================================================
164	!
165	#include "1D_decl_cases.h"
166	!
167	!---------------------------------------------------------------------
168	! Declarations related to nudging
169	!---------------------------------------------------------------------
170	integer :: nudge_max
171	parameter (nudge_max=9)
172	integer :: inudge_RHT=1
173	integer :: inudge_UV=2
174	logical :: nudge(nudge_max)
175	real :: t_targ(llm)
176	real :: rh_targ(llm)
177	real :: u_targ(llm)
178	real :: v_targ(llm)
179	!
180	!---------------------------------------------------------------------
181	! Declarations related to vertical discretization:
182	!---------------------------------------------------------------------
183	real :: pzero=1.e5
184	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
185	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
186
187	!---------------------------------------------------------------------
188	! Declarations related to variables
189	!---------------------------------------------------------------------
190
191	real :: phi(llm)
192	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
193	REAL rot(1, llm) ! relative vorticity, in s-1
194	real :: rlat_rad(1),rlon_rad(1)
195	real :: omega(llm+1),omega2(llm),rho(llm+1)
196	real :: ug(llm),vg(llm),fcoriolis
197	real :: sfdt, cfdt
198	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
199	real :: dt_dyn(llm)
200	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
201	real :: d_u_nudge(llm),d_v_nudge(llm)
202	real :: du_adv(llm),dv_adv(llm)
203	real :: du_age(llm),dv_age(llm)
204	real :: alpha
205	real :: ttt
206
207	REAL, ALLOCATABLE, DIMENSION(:,:):: q
208	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
209	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
210	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
211	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
212	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
213
214	!---------------------------------------------------------------------
215	! Initialization of surface variables
216	!---------------------------------------------------------------------
217	real :: run_off_lic_0(1)
218	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
219	real :: tsoil(1,nsoilmx,nbsrf)
220	! real :: agesno(1,nbsrf)
221
222	!---------------------------------------------------------------------
223	! Call to phyredem
224	!---------------------------------------------------------------------
225	logical :: ok_writedem =.true.
226	real :: sollw_in = 0.
227	real :: solsw_in = 0.
228
229	!---------------------------------------------------------------------
230	! Call to physiq
231	!---------------------------------------------------------------------
232	logical :: firstcall=.true.
233	logical :: lastcall=.false.
234	real :: phis(1) = 0.0
235	real :: dpsrf(1)
236
237	!---------------------------------------------------------------------
238	! Initializations of boundary conditions
239	!---------------------------------------------------------------------
240	integer, parameter :: yd = 360
241	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
242	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
243	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
244	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
245	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
246	real :: phy_ice (yd) = 0.0 ! Fraction de glace
247	real :: phy_fter(yd) = 0.0 ! Fraction de terre
248	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
249	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
250	real :: phy_flic(yd) = 0.0 ! Fraction de glace
251
252	!---------------------------------------------------------------------
253	! Fichiers et d'autres variables
254	!---------------------------------------------------------------------
255	integer :: k,l,i,it=1,mxcalc
256	integer :: nsrf
257	integer jcode
258	INTEGER read_climoz
259	!
260	integer :: it_end ! iteration number of the last call
261	!Al1
262	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
263	data ecrit_slab_oc/-1/
264	!
265	! if flag_inhib_forcing = 0, tendencies of forcing are added
266	! <> 0, tendencies of forcing are not added
267	INTEGER :: flag_inhib_forcing = 0
268
269	!=====================================================================
270	! INITIALIZATIONS
271	!=====================================================================
272	du_phys(:)=0.
273	dv_phys(:)=0.
274	dt_phys(:)=0.
275	dt_dyn(:)=0.
276	dt_cooling(:)=0.
277	d_t_adv(:)=0.
278	d_t_nudge(:)=0.
279	d_u_nudge(:)=0.
280	d_v_nudge(:)=0.
281	du_adv(:)=0.
282	dv_adv(:)=0.
283	du_age(:)=0.
284	dv_age(:)=0.
285
286	! Initialization of Common turb_forcing
287	dtime_frcg = 0.
288	Turb_fcg_gcssold=.false.
289	hthturb_gcssold = 0.
290	hqturb_gcssold = 0.
291
292
293
294
295	!---------------------------------------------------------------------
296	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
297	!---------------------------------------------------------------------
298	!Al1
299	call conf_unicol
300	!Al1 moves this gcssold var from common fcg_gcssold to
301	Turb_fcg_gcssold = xTurb_fcg_gcssold
302	! --------------------------------------------------------------------
303	close(1)
304	!Al1
305	write(,) 'lmdz1d.def lu => unicol.def'
306
307	! forcing_type defines the way the SCM is forced:
308	!forcing_type = 0 ==> forcing_les = .true.
309	! initial profiles from file prof.inp.001
310	! no forcing by LS convergence ;
311	! surface temperature imposed ;
312	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
313	!forcing_type = 1 ==> forcing_radconv = .true.
314	! idem forcing_type = 0, but the imposed radiative cooling
315	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
316	! then there is no radiative cooling at all)
317	!forcing_type = 2 ==> forcing_toga = .true.
318	! initial profiles from TOGA-COARE IFA files
319	! LS convergence and SST imposed from TOGA-COARE IFA files
320	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
321	! initial profiles from the GCM output
322	! LS convergence imposed from the GCM output
323	!forcing_type = 4 ==> forcing_twpice = .true.
324	! initial profiles from TWP-ICE cdf file
325	! LS convergence, omega and SST imposed from TWP-ICE files
326	!forcing_type = 5 ==> forcing_rico = .true.
327	! initial profiles from RICO files
328	! LS convergence imposed from RICO files
329	!forcing_type = 6 ==> forcing_amma = .true.
330	! initial profiles from AMMA nc file
331	! LS convergence, omega and surface fluxes imposed from AMMA file
332	!forcing_type = 7 ==> forcing_dice = .true.
333	! initial profiles and large scale forcings in dice_driver.nc
334	! Different stages: soil model alone, atm. model alone
335	! then both models coupled
336	!forcing_type = 8 ==> forcing_gabls4 = .true.
337	! initial profiles and large scale forcings in gabls4_driver.nc
338	!forcing_type >= 100 ==> forcing_case = .true.
339	! initial profiles and large scale forcings in cas.nc
340	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
341	! 101=cindynamo
342	! 102=bomex
343	!forcing_type >= 100 ==> forcing_case2 = .true.
344	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
345	! 103=arm_cu2 ie arm_cu with new forcing format
346	! 104=rico2 ie rico with new forcing format
347	!forcing_type = 40 ==> forcing_GCSSold = .true.
348	! initial profile from GCSS file
349	! LS convergence imposed from GCSS file
350	!forcing_type = 50 ==> forcing_fire = .true.
351	! forcing from fire.nc
352	!forcing_type = 59 ==> forcing_sandu = .true.
353	! initial profiles from sanduref file: see prof.inp.001
354	! SST varying with time and divergence constante: see ifa_sanduref.txt file
355	! Radiation has to be computed interactively
356	!forcing_type = 60 ==> forcing_astex = .true.
357	! initial profiles from file: see prof.inp.001
358	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
359	! Radiation has to be computed interactively
360	!forcing_type = 61 ==> forcing_armcu = .true.
361	! initial profiles from file: see prof.inp.001
362	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
363	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
364	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
365	! Radiation to be switched off
366	!
367	if (forcing_type <=0) THEN
368	forcing_les = .true.
369	elseif (forcing_type .eq.1) THEN
370	forcing_radconv = .true.
371	elseif (forcing_type .eq.2) THEN
372	forcing_toga = .true.
373	elseif (forcing_type .eq.3) THEN
374	forcing_GCM2SCM = .true.
375	elseif (forcing_type .eq.4) THEN
376	forcing_twpice = .true.
377	elseif (forcing_type .eq.5) THEN
378	forcing_rico = .true.
379	elseif (forcing_type .eq.6) THEN
380	forcing_amma = .true.
381	elseif (forcing_type .eq.7) THEN
382	forcing_dice = .true.
383	elseif (forcing_type .eq.8) THEN
384	forcing_gabls4 = .true.
385	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
386	forcing_case = .true.
387	year_ini_cas=2011
388	mth_ini_cas=10
389	day_deb=1
390	heure_ini_cas=0.
391	pdt_cas=3*3600. ! forcing frequency
392	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
393	forcing_case = .true.
394	year_ini_cas=1969
395	mth_ini_cas=6
396	day_deb=24
397	heure_ini_cas=0.
398	pdt_cas=1800. ! forcing frequency
399	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
400	forcing_case2 = .true.
401	year_ini_cas=1997
402	mth_ini_cas=6
403	day_deb=21
404	heure_ini_cas=11.5
405	pdt_cas=1800. ! forcing frequency
406	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
407	forcing_case2 = .true.
408	year_ini_cas=2004
409	mth_ini_cas=12
410	day_deb=16
411	heure_ini_cas=0.
412	pdt_cas=1800. ! forcing frequency
413	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
414	forcing_case2 = .true.
415	year_ini_cas=1969
416	mth_ini_cas=6
417	day_deb=24
418	heure_ini_cas=0.
419	pdt_cas=1800. ! forcing frequency
420	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
421	forcing_case2 = .true.
422	year_ini_cas=1992
423	mth_ini_cas=11
424	day_deb=6
425	heure_ini_cas=10.
426	pdt_cas=86400. ! forcing frequency
427	elseif (forcing_type .eq.40) THEN
428	forcing_GCSSold = .true.
429	elseif (forcing_type .eq.50) THEN
430	forcing_fire = .true.
431	elseif (forcing_type .eq.59) THEN
432	forcing_sandu = .true.
433	elseif (forcing_type .eq.60) THEN
434	forcing_astex = .true.
435	elseif (forcing_type .eq.61) THEN
436	forcing_armcu = .true.
437	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
438	else
439	write (,) 'ERROR : unknown forcing_type ', forcing_type
440	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
441	ENDIF
442	print*,"forcing type=",forcing_type
443
444	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
445	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
446	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
447	! through the common sst_forcing.
448
449	type_ts_forcing = 0
450	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
451	& type_ts_forcing = 1
452	!
453	! Initialization of the logical switch for nudging
454	jcode = iflag_nudge
455	do i = 1,nudge_max
456	nudge(i) = mod(jcode,10) .ge. 1
457	jcode = jcode/10
458	enddo
459	!---------------------------------------------------------------------
460	! Definition of the run
461	!---------------------------------------------------------------------
462
463	call conf_gcm( 99, .TRUE. )
464	!-----------------------------------------------------------------------
465	! Choix du calendrier
466	! -------------------
467
468	! calend = 'earth_365d'
469	if (calend == 'earth_360d') then
470	call ioconf_calendar('360d')
471	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
472	else if (calend == 'earth_365d') then
473	call ioconf_calendar('noleap')
474	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
475	else if (calend == 'earth_366d') then
476	call ioconf_calendar('all_leap')
477	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
478	else if (calend == 'gregorian') then
479	call ioconf_calendar('gregorian') ! not to be used by normal users
480	write(,)'CALENDRIER CHOISI: Gregorien'
481	else
482	write (,) 'ERROR : unknown calendar ', calend
483	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
484	endif
485	!-----------------------------------------------------------------------
486	!
487	!c Date :
488	! La date est supposee donnee sous la forme [annee, numero du jour dans
489	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
490	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
491	! Le numero du jour est dans "day". L heure est traitee separement.
492	! La date complete est dans "daytime" (l'unite est le jour).
493	if (nday>0) then
494	fnday=nday
495	else
496	fnday=-nday/float(day_step)
497	endif
498	print *,'fnday=',fnday
499	! start_time doit etre en FRACTION DE JOUR
500	start_time=time_ini/24.
501
502	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
503	IF(forcing_type .EQ. 61) fnday=53100./86400.
504	IF(forcing_type .EQ. 103) fnday=53100./86400.
505	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
506	IF(forcing_type .EQ. 6) fnday=64800./86400.
507	! IF(forcing_type .EQ. 6) fnday=50400./86400.
508	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
509	annee_ref = anneeref
510	mois = 1
511	day_ref = dayref
512	heure = 0.
513	itau_dyn = 0
514	itau_phy = 0
515	call ymds2ju(annee_ref,mois,day_ref,heure,day)
516	day_ini = int(day)
517	day_end = day_ini + int(fnday)
518
519	IF (forcing_type .eq.2) THEN
520	! Convert the initial date of Toga-Coare to Julian day
521	call ymds2ju &
522	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
523
524	ELSEIF (forcing_type .eq.4) THEN
525	! Convert the initial date of TWPICE to Julian day
526	call ymds2ju &
527	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
528	& ,day_ju_ini_twpi)
529	ELSEIF (forcing_type .eq.6) THEN
530	! Convert the initial date of AMMA to Julian day
531	call ymds2ju &
532	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
533	& ,day_ju_ini_amma)
534	ELSEIF (forcing_type .eq.7) THEN
535	! Convert the initial date of DICE to Julian day
536	call ymds2ju &
537	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
538	& ,day_ju_ini_dice)
539	ELSEIF (forcing_type .eq.8 ) THEN
540	! Convert the initial date of GABLS4 to Julian day
541	call ymds2ju &
542	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
543	& ,day_ju_ini_gabls4)
544	ELSEIF (forcing_type .gt.100) THEN
545	! Convert the initial date to Julian day
546	day_ini_cas=day_deb
547	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
548	call ymds2ju &
549	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
550	& ,day_ju_ini_cas)
551	print*,'time case 2',day_ini_cas,day_ju_ini_cas
552	ELSEIF (forcing_type .eq.59) THEN
553	! Convert the initial date of Sandu case to Julian day
554	call ymds2ju &
555	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
556	& time_ini*3600.,day_ju_ini_sandu)
557
558	ELSEIF (forcing_type .eq.60) THEN
559	! Convert the initial date of Astex case to Julian day
560	call ymds2ju &
561	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
562	& time_ini*3600.,day_ju_ini_astex)
563
564	ELSEIF (forcing_type .eq.61) THEN
565	! Convert the initial date of Arm_cu case to Julian day
566	call ymds2ju &
567	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
568	& ,day_ju_ini_armcu)
569	ENDIF
570
571	IF (forcing_type .gt.100) THEN
572	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
573	ELSE
574	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
575	ENDIF
576	! Print out the actual date of the beginning of the simulation :
577	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
578	print *,' Time of beginning : ', &
579	& year_print, month_print, day_print, sec_print
580
581	!---------------------------------------------------------------------
582	! Initialization of dimensions, geometry and initial state
583	!---------------------------------------------------------------------
584	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
585	! but we still need to initialize dimphy module (klon,klev,etc.) here.
586	call init_dimphy1D(1,llm)
587	call suphel
588	call infotrac_init
589
590	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
591	allocate(q(llm,nqtot)) ; q(:,:)=0.
592	allocate(dq(llm,nqtot))
593	allocate(dq_dyn(llm,nqtot))
594	allocate(d_q_adv(llm,nqtot))
595	allocate(d_q_nudge(llm,nqtot))
596	! allocate(d_th_adv(llm))
597
598	q(:,:) = 0.
599	dq(:,:) = 0.
600	dq_dyn(:,:) = 0.
601	d_q_adv(:,:) = 0.
602	d_q_nudge(:,:) = 0.
603
604	!
605	! No ozone climatology need be read in this pre-initialization
606	! (phys_state_var_init is called again in physiq)
607	read_climoz = 0
608	!
609	call phys_state_var_init(read_climoz)
610
611	if (ngrid.ne.klon) then
612	print*,'stop in inifis'
613	print*,'Probleme de dimensions :'
614	print*,'ngrid = ',ngrid
615	print*,'klon = ',klon
616	stop
617	endif
618	!!!=====================================================================
619	!!! Feedback forcing values for Gateaux differentiation (al1)
620	!!!=====================================================================
621	!!! Surface Planck forcing bracketing call radiation
622	!! surf_Planck = 0.
623	!! surf_Conv = 0.
624	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
625	!!! a mettre dans le lmdz1d.def ou autre
626	!!
627	!!
628	qsol = qsolinp
629	qsurf = fq_sat(tsurf,psurf/100.)
630	day1= day_ini
631	time=daytime-day
632	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
633	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
634
635	!
636	!! mpl et jyg le 22/08/2012 :
637	!! pour que les cas a flux de surface imposes marchent
638	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
639	fsens=-wtsurfrcpdrho(1)
640	flat=-wqsurfrlvttrho(1)
641	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
642	ENDIF
643	print*,'Flux sol ',fsens,flat
644	!! ok_flux_surf=.false.
645	!! fsens=-wtsurfrcpdrho(1)
646	!! flat=-wqsurfrlvttrho(1)
647	!!!!
648
649	! Vertical discretization and pressure levels at half and mid levels:
650
651	pa = 5e4
652	!! preff= 1.01325e5
653	preff = psurf
654	IF (ok_old_disvert) THEN
655	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
656	print *,'On utilise disvert0'
657	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
658	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
659	scaleheight=8.
660	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
661	ELSE
662	call disvert()
663	print *,'On utilise disvert'
664	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
665	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
666	ENDIF
667
668	sig_s=presnivs/preff
669	plev =ap+bp*psurf
670	play = 0.5*(plev(1:llm)+plev(2:llm+1))
671	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
672
673	IF (forcing_type .eq. 59) THEN
674	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
675	write(,) '***********************'
676	do l = 1, llm
677	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
678	if (trouve_700 .and. play(l).le.70000) then
679	llm700=l
680	print *,'llm700,play=',llm700,play(l)/100.
681	trouve_700= .false.
682	endif
683	enddo
684	write(,) '***********************'
685	ENDIF
686
687	!
688	!=====================================================================
689	! EVENTUALLY, READ FORCING DATA :
690	!=====================================================================
691
692	#include "1D_read_forc_cases.h"
693
694	if (forcing_GCM2SCM) then
695	write (,) 'forcing_GCM2SCM not yet implemented'
696	stop 'in initialization'
697	endif ! forcing_GCM2SCM
698
699	print*,'mxcalc=',mxcalc
700	! print*,'zlay=',zlay(mxcalc)
701	print*,'play=',play(mxcalc)
702
703	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
704	ts_cur = tsurf ! SST used in read_tsurf1d
705	!=====================================================================
706	! Initialisation de la physique :
707	!=====================================================================
708
709	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
710	!
711	! day_step, iphysiq lus dans gcm.def ci-dessus
712	! timestep: calcule ci-dessous from rday et day_step
713	! ngrid=1
714	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
715	! rday: defini dans suphel.F (86400.)
716	! day_ini: lu dans run.def (dayref)
717	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
718	! airefi,zcufi,zcvfi initialises au debut de ce programme
719	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
720	day_step = float(nsplit_phys)*day_step/float(iphysiq)
721	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
722	timestep =rday/day_step
723	dtime_frcg = timestep
724	!
725	zcufi=airefi
726	zcvfi=airefi
727	!
728	rlat_rad(1)=xlat*rpi/180.
729	rlon_rad(1)=xlon*rpi/180.
730
731	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
732	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
733	! with '0.' when necessary
734	call iniphysiq(iim,jjm,llm, &
735	1,comm_lmdz, &
736	rday,day_ini,timestep, &
737	(/rlat_rad(1),0./),(/0./), &
738	(/0.,0./),(/rlon_rad(1),0./), &
739	(/ (/airefi,0./),(/0.,0./) /), &
740	(/zcufi,0.,0.,0./), &
741	(/zcvfi,0./), &
742	ra,rg,rd,rcpd,1)
743	print*,'apres iniphysiq'
744
745	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
746	co2_ppm= 330.0
747	solaire=1370.0
748
749	! Ecriture du startphy avant le premier appel a la physique.
750	! On le met juste avant pour avoir acces a tous les champs
751
752	if (ok_writedem) then
753
754	!--------------------------------------------------------------------------
755	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
756	! need : qsol fder snow qsurf evap rugos agesno ftsoil
757	!--------------------------------------------------------------------------
758
759	type_ocean = "force"
760	run_off_lic_0(1) = restart_runoff
761	call fonte_neige_init(run_off_lic_0)
762
763	fder=0.
764	snsrf(1,:)=snowmass ! masse de neige des sous surface
765	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
766	fevap=0.
767	z0m(1,:)=rugos ! couverture de neige des sous surface
768	z0h(1,:)=rugosh ! couverture de neige des sous surface
769	agesno = xagesno
770	tsoil(:,:,:)=tsurf
771	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
772	! tsoil(1,1,1)=299.18
773	! tsoil(1,2,1)=300.08
774	! tsoil(1,3,1)=301.88
775	! tsoil(1,4,1)=305.48
776	! tsoil(1,5,1)=308.00
777	! tsoil(1,6,1)=308.00
778	! tsoil(1,7,1)=308.00
779	! tsoil(1,8,1)=308.00
780	! tsoil(1,9,1)=308.00
781	! tsoil(1,10,1)=308.00
782	! tsoil(1,11,1)=308.00
783	!-----------------------------------------------------------------------
784	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
785
786	!------------------ prepare limit conditions for limit.nc -----------------
787	!-- Ocean force
788
789	print*,'avant phyredem'
790	pctsrf(1,:)=0.
791	if (nat_surf.eq.0.) then
792	pctsrf(1,is_oce)=1.
793	pctsrf(1,is_ter)=0.
794	pctsrf(1,is_lic)=0.
795	pctsrf(1,is_sic)=0.
796	else if (nat_surf .eq. 1) then
797	pctsrf(1,is_oce)=0.
798	pctsrf(1,is_ter)=1.
799	pctsrf(1,is_lic)=0.
800	pctsrf(1,is_sic)=0.
801	else if (nat_surf .eq. 2) then
802	pctsrf(1,is_oce)=0.
803	pctsrf(1,is_ter)=0.
804	pctsrf(1,is_lic)=1.
805	pctsrf(1,is_sic)=0.
806	else if (nat_surf .eq. 3) then
807	pctsrf(1,is_oce)=0.
808	pctsrf(1,is_ter)=0.
809	pctsrf(1,is_lic)=0.
810	pctsrf(1,is_sic)=1.
811
812	end if
813
814
815	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
816	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
817
818	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
819	zpic = zpicinp
820	ftsol=tsurf
821	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
822	! 6 albedo, mais on peut quand meme tourner avec
823	! moins. Seules les 2 ou 4 premiers seront lus
824	falb_dir=albedo
825	falb_dif=albedo
826	rugoro=rugos
827	t_ancien(1,:)=temp(:)
828	q_ancien(1,:)=q(:,1)
829	ql_ancien = 0.
830	qs_ancien = 0.
831	prlw_ancien = 0.
832	prsw_ancien = 0.
833	prw_ancien = 0.
834	!jyg<
835	!! pbl_tke(:,:,:)=1.e-8
836	pbl_tke(:,:,:)=0.
837	pbl_tke(:,2,:)=1.e-2
838	PRINT *, ' pbl_tke dans lmdz1d '
839	if (prt_level .ge. 5) then
840	DO nsrf = 1,4
841	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
842	ENDDO
843	end if
844
845	!>jyg
846
847	rain_fall=0.
848	snow_fall=0.
849	solsw=0.
850	sollw=0.
851	sollwdown=rsigmatsurf*4
852	radsol=0.
853	rnebcon=0.
854	ratqs=0.
855	clwcon=0.
856	zmax0 = 0.
857	zmea=0.
858	zstd=0.
859	zsig=0.
860	zgam=0.
861	zval=0.
862	zthe=0.
863	sig1=0.
864	w01=0.
865	wake_cstar = 0.
866	wake_deltaq = 0.
867	wake_deltat = 0.
868	wake_delta_pbl_TKE(:,:,:) = 0.
869	delta_tsurf = 0.
870	wake_fip = 0.
871	wake_pe = 0.
872	wake_s = 0.
873	wake_dens = 0.
874	ale_bl = 0.
875	ale_bl_trig = 0.
876	alp_bl = 0.
877	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
878	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
879	entr_therm = 0.
880	detr_therm = 0.
881	f0 = 0.
882	fm_therm = 0.
883	u_ancien(1,:)=u(:)
884	v_ancien(1,:)=v(:)
885
886	!------------------------------------------------------------------------
887	! Make file containing restart for the physics (startphy.nc)
888	!
889	! NB: List of the variables to be written by phyredem (via put_field):
890	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
891	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
892	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
893	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
894	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
895	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
896	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
897	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
898	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
899	!
900	! NB2: The content of the startphy.nc file depends on some flags defined in
901	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
902	! to be set at some arbitratry convenient values.
903	!------------------------------------------------------------------------
904	!Al1 =============== restart option ==========================
905	if (.not.restart) then
906	iflag_pbl = 5
907	call phyredem ("startphy.nc")
908	else
909	! (desallocations)
910	print*,'callin surf final'
911	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
912	print*,'after surf final'
913	CALL fonte_neige_final(run_off_lic_0)
914	endif
915
916	ok_writedem=.false.
917	print*,'apres phyredem'
918
919	endif ! ok_writedem
920
921	!------------------------------------------------------------------------
922	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
923	! --------------------------------------------------
924	! NB: List of the variables to be written in limit.nc
925	! (by writelim.F, subroutine of 1DUTILS.h):
926	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
927	! phy_fter,phy_foce,phy_flic,phy_fsic)
928	!------------------------------------------------------------------------
929	do i=1,yd
930	phy_nat(i) = nat_surf
931	phy_alb(i) = albedo
932	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
933	phy_rug(i) = rugos
934	phy_fter(i) = pctsrf(1,is_ter)
935	phy_foce(i) = pctsrf(1,is_oce)
936	phy_fsic(i) = pctsrf(1,is_sic)
937	phy_flic(i) = pctsrf(1,is_lic)
938	enddo
939
940	! fabrication de limit.nc
941	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
942	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
943
944
945	call phys_state_var_end
946	!Al1
947	if (restart) then
948	print*,'call to restart dyn 1d'
949	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
950	& u,v,temp,q,omega2)
951
952	print*,'fnday,annee_ref,day_ref,day_ini', &
953	& fnday,annee_ref,day_ref,day_ini
954	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
955	day = day_ini
956	day_end = day_ini + nday
957	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
958
959	! Print out the actual date of the beginning of the simulation :
960	call ju2ymds(daytime, an, mois, jour, heure)
961	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
962
963	day = int(daytime)
964	time=daytime-day
965
966	print,'*** intialised fields from restart1dyn *****'
967	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
968	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
969	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
970	! raz for safety
971	do l=1,llm
972	dq_dyn(l,1) = 0.
973	enddo
974	endif
975	!Al1 ================ end restart =================================
976	IF (ecrit_slab_oc.eq.1) then
977	open(97,file='div_slab.dat',STATUS='UNKNOWN')
978	elseif (ecrit_slab_oc.eq.0) then
979	open(97,file='div_slab.dat',STATUS='OLD')
980	endif
981	!
982	!---------------------------------------------------------------------
983	! Initialize target profile for RHT nudging if needed
984	!---------------------------------------------------------------------
985	if (nudge(inudge_RHT)) then
986	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
987	endif
988	if (nudge(inudge_UV)) then
989	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
990	endif
991	!
992	!=====================================================================
993	CALL iophys_ini
994	! START OF THE TEMPORAL LOOP :
995	!=====================================================================
996
997	it_end = nint(fnday*day_step)
998	!test JLD it_end = 10
999	do while(it.le.it_end)
1000
1001	if (prt_level.ge.1) then
1002	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
1003	& it,day,time,it_end,day_step
1004	print*,'PAS DE TEMPS ',timestep
1005	endif
1006	!Al1 demande de restartphy.nc
1007	if (it.eq.it_end) lastcall=.True.
1008
1009	!---------------------------------------------------------------------
1010	! Interpolation of forcings in time and onto model levels
1011	!---------------------------------------------------------------------
1012
1013	#include "1D_interp_cases.h"
1014
1015	if (forcing_GCM2SCM) then
1016	write (,) 'forcing_GCM2SCM not yet implemented'
1017	stop 'in time loop'
1018	endif ! forcing_GCM2SCM
1019
1020	!---------------------------------------------------------------------
1021	! Geopotential :
1022	!---------------------------------------------------------------------
1023
1024	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1025	do l = 1, llm-1
1026	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1027	& (play(l)-play(l+1))/(play(l)+play(l+1))
1028	enddo
1029
1030	!---------------------------------------------------------------------
1031	! Listing output for debug prt_level>=1
1032	!---------------------------------------------------------------------
1033	if (prt_level>=1) then
1034	print *,' avant physiq : -------- day time ',day,time
1035	write(,) 'firstcall,lastcall,phis', &
1036	& firstcall,lastcall,phis
1037	end if
1038	if (prt_level>=5) then
1039	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1040	& 'presniv','plev','play','phi'
1041	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1042	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1043	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1044	& 'presniv','u','v','temp','q1','q2','omega2'
1045	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1046	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1047	endif
1048
1049	!---------------------------------------------------------------------
1050	! Call physiq :
1051	!---------------------------------------------------------------------
1052	call physiq(ngrid,llm, &
1053	firstcall,lastcall,timestep, &
1054	plev,play,phi,phis,presnivs, &
1055	u,v, rot, temp,q,omega2, &
1056	du_phys,dv_phys,dt_phys,dq,dpsrf)
1057	firstcall=.false.
1058
1059	!---------------------------------------------------------------------
1060	! Listing output for debug
1061	!---------------------------------------------------------------------
1062	if (prt_level>=5) then
1063	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1064	& 'presniv','plev','play','phi'
1065	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1066	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1067	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1068	& 'presniv','u','v','temp','q1','q2','omega2'
1069	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1070	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1071	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1072	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1073	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1074	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1075	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1076	write(,) 'dpsrf',dpsrf
1077	endif
1078	!---------------------------------------------------------------------
1079	! Add physical tendencies :
1080	!---------------------------------------------------------------------
1081
1082	fcoriolis=2.sin(rpixlat/180.)*romega
1083	if (forcing_radconv .or. forcing_fire) then
1084	fcoriolis=0.0
1085	dt_cooling=0.0
1086	d_t_adv=0.0
1087	d_q_adv=0.0
1088	endif
1089	! print*, 'calcul de fcoriolis ', fcoriolis
1090
1091	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1092	& .or.forcing_amma .or. forcing_type.eq.101) then
1093	fcoriolis=0.0 ; ug=0. ; vg=0.
1094	endif
1095
1096	if(forcing_rico) then
1097	dt_cooling=0.
1098	endif
1099
1100	!CRio:Attention modif sp??cifique cas de Caroline
1101	if (forcing_type==-1) then
1102	fcoriolis=0.
1103	!Nudging
1104
1105	!on calcule dt_cooling
1106	do l=1,llm
1107	if (play(l).ge.20000.) then
1108	dt_cooling(l)=-1.5/86400.
1109	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
1110	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
1111	else
1112	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
1113	endif
1114	enddo
1115
1116	endif
1117	!RC
1118	if (forcing_sandu) then
1119	ug(1:llm)=u_mod(1:llm)
1120	vg(1:llm)=v_mod(1:llm)
1121	endif
1122
1123	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1124	fcoriolis, xlat,mxcalc
1125
1126	! print *,'u-ug=',u-ug
1127
1128	!!!!!!!!!!!!!!!!!!!!!!!!
1129	! Geostrophic wind
1130	! Le calcul ci dessous est insuffisamment precis
1131	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1132	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1133	!!!!!!!!!!!!!!!!!!!!!!!!
1134	sfdt = sin(0.5fcoriolistimestep)
1135	cfdt = cos(0.5fcoriolistimestep)
1136	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1137	!
1138	du_age(1:mxcalc)= -2.sfdt/timestep &
1139	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1140	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1141	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1142	!
1143	dv_age(1:mxcalc)= -2.sfdt/timestep &
1144	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1145	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1146	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1147	!
1148	!!!!!!!!!!!!!!!!!!!!!!!!
1149	! Nudging
1150	!!!!!!!!!!!!!!!!!!!!!!!!
1151	d_t_nudge(:) = 0.
1152	d_q_nudge(:,:) = 0.
1153	d_u_nudge(:) = 0.
1154	d_v_nudge(:) = 0.
1155	if (nudge(inudge_RHT)) then
1156	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1157	& d_t_nudge,d_q_nudge(:,1))
1158	endif
1159	if (nudge(inudge_UV)) then
1160	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1161	& d_u_nudge,d_v_nudge)
1162	endif
1163	!
1164	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1165	! call writefield_phy('dv_age' ,dv_age,llm)
1166	! call writefield_phy('du_age' ,du_age,llm)
1167	! call writefield_phy('du_phys' ,du_phys,llm)
1168	! call writefield_phy('u_tend' ,u,llm)
1169	! call writefield_phy('u_g' ,ug,llm)
1170	!
1171	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1172	!! Increment state variables
1173	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1174	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1175
1176	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1177	! au dessus de 700hpa, on relaxe vers les profils initiaux
1178	if (forcing_sandu .OR. forcing_astex) then
1179	#include "1D_nudge_sandu_astex.h"
1180	else
1181	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1182	& du_phys(1:mxcalc) &
1183	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1184	& +d_u_nudge(1:mxcalc) )
1185	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1186	& dv_phys(1:mxcalc) &
1187	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1188	& +d_v_nudge(1:mxcalc) )
1189	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1190	& dq(1:mxcalc,:) &
1191	& +d_q_adv(1:mxcalc,:) &
1192	& +d_q_nudge(1:mxcalc,:) )
1193
1194	if (prt_level.ge.3) then
1195	print *, &
1196	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1197	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1198	print* ,'dv_phys=',dv_phys
1199	print* ,'dv_age=',dv_age
1200	print* ,'dv_adv=',dv_adv
1201	print* ,'d_v_nudge=',d_v_nudge
1202	print*, v
1203	print*, vg
1204	endif
1205
1206	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1207	& dt_phys(1:mxcalc) &
1208	& +d_t_adv(1:mxcalc) &
1209	& +d_t_nudge(1:mxcalc) &
1210	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1211
1212	endif ! forcing_sandu or forcing_astex
1213
1214	teta=temp(pzero/play)*rkappa
1215	!
1216	!---------------------------------------------------------------------
1217	! Nudge soil temperature if requested
1218	!---------------------------------------------------------------------
1219
1220	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1221	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1222	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1223	ENDIF
1224
1225	!---------------------------------------------------------------------
1226	! Add large-scale tendencies (advection, etc) :
1227	!---------------------------------------------------------------------
1228
1229	!cc nrlmd
1230	!cc tmpvar=teta
1231	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1232	!cc
1233	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1234	!cc tmpvar(:)=q(:,1)
1235	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1236	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1237	!cc tmpvar(:)=q(:,2)
1238	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1239	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1240
1241	END IF ! end if tendency of tendency should be added
1242
1243	!---------------------------------------------------------------------
1244	! Air temperature :
1245	!---------------------------------------------------------------------
1246	if (lastcall) then
1247	print*,'Pas de temps final ',it
1248	call ju2ymds(daytime, an, mois, jour, heure)
1249	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1250	endif
1251
1252	! incremente day time
1253	! print*,'daytime bef',daytime,1./day_step
1254	daytime = daytime+1./day_step
1255	!Al1dbg
1256	day = int(daytime+0.1/day_step)
1257	! time = max(daytime-day,0.0)
1258	!Al1&jyg: correction de bug
1259	!cc time = real(mod(it,day_step))/day_step
1260	time = time_ini/24.+real(mod(it,day_step))/day_step
1261	! print*,'daytime nxt time',daytime,time
1262	it=it+1
1263
1264	enddo
1265
1266	!Al1
1267	if (ecrit_slab_oc.ne.-1) close(97)
1268
1269	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1270	! -------------------------------------
1271	call dyn1dredem("restart1dyn.nc", &
1272	& plev,play,phi,phis,presnivs, &
1273	& u,v,temp,q,omega2)
1274
1275	CALL abort_gcm ('lmdz1d ','The End ',0)
1276
1277	end
1278
1279	#include "1DUTILS.h"
1280	#include "1Dconv.h"
1281
1282	!#endif
1283
1284

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format