source: LMDZ6/branches/Amaury_dev/libf/dyn3d/lmdz_dynetat0.f90 @ 5218

MODULE lmdz_dynetat0
  IMPLICIT NONE; PRIVATE
  PUBLIC dynetat0
CONTAINS

  SUBROUTINE dynetat0(fichnom, vcov, ucov, teta, q, masse, ps, phis, time)

    !-------------------------------------------------------------------------------
    ! Authors: P. Le Van , L.Fairhead
    !-------------------------------------------------------------------------------
    ! Purpose: Initial state reading.
    !-------------------------------------------------------------------------------
    USE lmdz_infotrac, ONLY: nqtot, tracers, niso, iqIsoPha, iH2O, isoName
    USE lmdz_strings, ONLY: maxlen, msg, strStack, real2str, int2str
    USE netcdf, ONLY: nf90_open, nf90_nowrite, nf90_inq_varid, nf90_close, nf90_get_var, nf90_noerr
    USE lmdz_readTracFiles, ONLY: new2oldH2O, newHNO3, oldHNO3, getKey
    USE control_mod, ONLY: planet_type
    USE lmdz_assert_eq, ONLY: assert_eq
    USE comvert_mod, ONLY: pa, preff
    USE comconst_mod, ONLY: cpp, daysec, dtvr, g, im, jm, kappa, lllm, omeg, rad
    USE logic_mod, ONLY: fxyhypb, ysinus
    USE serre_mod, ONLY: clon, clat, grossismx, grossismy
    USE temps_mod, ONLY: annee_ref, day_ini, day_ref, itau_dyn, start_time
    USE ener_mod, ONLY: etot0, ptot0, ztot0, stot0, ang0
    USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_INCA, CPPKEY_REPROBUS
    USE lmdz_iniprint, ONLY: lunout, prt_level
    USE lmdz_comgeom2
    USE lmdz_strings, ONLY: strIdx

    USE lmdz_dimensions, ONLY: iim, jjm, llm, ndm
    USE lmdz_paramet
    IMPLICIT NONE


    !===============================================================================
    ! Arguments:
    CHARACTER(LEN = *), INTENT(IN) :: fichnom          !--- FILE NAME
    REAL, INTENT(OUT) :: vcov(iip1, jjm, llm)        !--- V COVARIANT WIND
    REAL, INTENT(OUT) :: ucov(iip1, jjp1, llm)        !--- U COVARIANT WIND
    REAL, INTENT(OUT) :: teta(iip1, jjp1, llm)        !--- POTENTIAL TEMP.
    REAL, INTENT(OUT) :: q(iip1, jjp1, llm, nqtot)  !--- TRACERS
    REAL, INTENT(OUT) :: masse(iip1, jjp1, llm)        !--- MASS PER CELL
    REAL, INTENT(OUT) :: ps(iip1, jjp1)            !--- GROUND PRESSURE
    REAL, INTENT(OUT) :: phis(iip1, jjp1)            !--- GEOPOTENTIAL
    !===============================================================================
    ! Local variables:
    CHARACTER(LEN = maxlen) :: mesg, var, modname, oldVar
    INTEGER, PARAMETER :: length = 100
    INTEGER :: iq, fID, vID, idecal, iqParent, iName, iZone, iPhase, ix
    REAL :: time, tnat, alpha_ideal, tab_cntrl(length)    !--- RUN PARAMS TABLE
    LOGICAL :: lSkip, ll
    LOGICAL, PARAMETER :: tnat1 = .TRUE.
    !-------------------------------------------------------------------------------
    modname = "dynetat0"

    !--- Initial state file opening
    var = fichnom
    CALL err(nf90_open(var, nf90_nowrite, fID), "open", var)
    CALL get_var1("controle", tab_cntrl)

    !!! AS: idecal is a hack to be able to read planeto starts...
    !!!     .... while keeping everything OK for LMDZ EARTH
    IF(planet_type=="generic") THEN
      CALL msg('NOTE NOTE NOTE : Planeto-like start files', modname)
      idecal = 4
      annee_ref = 2000
    ELSE
      CALL msg('NOTE NOTE NOTE : Earth-like start files', modname)
      idecal = 5
      annee_ref = tab_cntrl(5)
    END IF
    im = tab_cntrl(1)
    jm = tab_cntrl(2)
    lllm = tab_cntrl(3)
    day_ref = tab_cntrl(4)
    rad = tab_cntrl(idecal + 1)
    omeg = tab_cntrl(idecal + 2)
    g = tab_cntrl(idecal + 3)
    cpp = tab_cntrl(idecal + 4)
    kappa = tab_cntrl(idecal + 5)
    daysec = tab_cntrl(idecal + 6)
    dtvr = tab_cntrl(idecal + 7)
    etot0 = tab_cntrl(idecal + 8)
    ptot0 = tab_cntrl(idecal + 9)
    ztot0 = tab_cntrl(idecal + 10)
    stot0 = tab_cntrl(idecal + 11)
    ang0 = tab_cntrl(idecal + 12)
    pa = tab_cntrl(idecal + 13)
    preff = tab_cntrl(idecal + 14)

    clon = tab_cntrl(idecal + 15)
    clat = tab_cntrl(idecal + 16)
    grossismx = tab_cntrl(idecal + 17)
    grossismy = tab_cntrl(idecal + 18)

    IF (tab_cntrl(idecal + 19)==1.)  THEN
      fxyhypb = .TRUE.
      !   dzoomx   = tab_cntrl(25)
      !   dzoomy   = tab_cntrl(26)
      !   taux     = tab_cntrl(28)
      !   tauy     = tab_cntrl(29)
    ELSE
      fxyhypb = .FALSE.
      ysinus = tab_cntrl(idecal + 22)==1.
    END IF

    day_ini = tab_cntrl(30)
    itau_dyn = tab_cntrl(31)
    start_time = tab_cntrl(32)

    !-------------------------------------------------------------------------------
    CALL msg('rad, omeg, g, cpp, kappa = ' // TRIM(strStack(real2str([rad, omeg, g, cpp, kappa]))), modname)
    CALL check_dim(im, iim, 'im', 'im')
    CALL check_dim(jm, jjm, 'jm', 'jm')
    CALL check_dim(lllm, llm, 'lm', 'lllm')
    CALL get_var1("rlonu", rlonu)
    CALL get_var1("rlatu", rlatu)
    CALL get_var1("rlonv", rlonv)
    CALL get_var1("rlatv", rlatv)
    CALL get_var2("cu", cu)
    CALL get_var2("cv", cv)
    CALL get_var2("aire", aire)
    var = "temps"
    IF(nf90_inq_varid(fID, var, vID)/=nf90_noerr) THEN
      CALL msg('missing field <temps> ; trying with <Time>', modname)
      var = "Time"
      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
    END IF
    CALL err(nf90_get_var(fID, vID, time), "get", var)
    CALL get_var2("phisinit", phis)
    CALL get_var3("ucov", ucov)
    CALL get_var3("vcov", vcov)
    CALL get_var3("teta", teta)
    CALL get_var3("masse", masse)
    CALL get_var2("ps", ps)

    !--- Tracers
    ll = .FALSE.
    IF (CPPKEY_REPROBUS) THEN
      ll = nf90_inq_varid(fID, 'HNO3tot', vID) /= nf90_noerr                                 !--- DETECT OLD REPRO start.nc FILE
    END IF
    DO iq = 1, nqtot
      var = tracers(iq)%name
      oldVar = new2oldH2O(var)
      lSkip = ll .AND. var == 'HNO3'                                                       !--- FORCE "HNO3_g" READING FOR "HNO3"
      IF (CPPKEY_REPROBUS) THEN
        ix = strIdx(newHNO3, var); IF(ix /= 0) oldVar = oldHNO3(ix)                          !--- REPROBUS HNO3 exceptions
      END IF
      IF (CPPKEY_INCA) THEN
        IF(var == 'O3') oldVar = 'OX'                                                        !--- DEAL WITH INCA OZONE EXCEPTION
      END IF
      !--------------------------------------------------------------------------------------------------------------------------
      IF(nf90_inq_varid(fID, var, vID) == nf90_noerr .AND. .NOT.lSkip) THEN                !=== REGULAR CASE: AVAILABLE VARIABLE
        CALL err(nf90_get_var(fID, vID, q(:, :, :, iq)), "get", var)
        !--------------------------------------------------------------------------------------------------------------------------
      ELSE IF(nf90_inq_varid(fID, oldVar, vID) == nf90_noerr) THEN                         !=== TRY WITH ALTERNATE NAME
        CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized to <' // TRIM(oldVar) // '>', modname)
        CALL err(nf90_get_var(fID, vID, q(:, :, :, iq)), "get", oldVar)
        !--------------------------------------------------------------------------------------------------------------------------
      ELSE IF(tracers(iq)%iso_iGroup == iH2O .AND. niso > 0) THEN                          !=== WATER ISOTOPES
        iName = tracers(iq)%iso_iName
        iPhase = tracers(iq)%iso_iPhase
        iqParent = tracers(iq)%iqParent
        IF(tracers(iq)%iso_iZone == 0) THEN
          IF (tnat1) THEN
            tnat = 1.0
            alpha_ideal = 1.0
            WRITE(*, *) 'attention dans dynetat0: les alpha_ideal sont a 1'
          else
            IF(getKey('tnat', tnat, isoName(iName)) .OR. getKey('alpha', alpha_ideal, isoName(iName))) &
                    CALL abort_gcm(TRIM(modname), 'missing isotopic parameters', 1)
          endif
          CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized with a simplified Rayleigh distillation law.', modname)
          q(:, :, :, iq) = q(:, :, :, iqParent) * tnat * (q(:, :, :, iqParent) / 30.e-3)**(alpha_ideal - 1.)
        ELSE
          CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized to its parent isotope concentration.', modname)
          ! Camille 9 mars 2023: attention!! seuls les tags qui correspondent à
          ! izone=izone_init (définie dans isotrac_mod) sont initialisés comme
          ! les parents. Sinon, c'est nul.
          ! j'ai fait ça en attendant, mais il faudrait initialiser proprement en
          ! remplacant 1 par izone_init dans la ligne qui suit.
          IF(tracers(iq)%iso_iZone == 1) THEN
            q(:, :, :, iq) = q(:, :, :, iqIsoPha(iName, iPhase))
          ELSE
            q(:, :, :, iq) = 0.
          END IF
        END IF
        !--------------------------------------------------------------------------------------------------------------------------
      ELSE                                                                                 !=== MISSING: SET TO 0
        CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized to zero', modname)
        q(:, :, :, iq) = 0.
        !--------------------------------------------------------------------------------------------------------------------------
      END IF
    END DO

    CALL err(nf90_close(fID), "close", fichnom)
    day_ini = day_ini + INT(time)
    time = time - INT(time)


  CONTAINS


    SUBROUTINE check_dim(n1, n2, str1, str2)
      INTEGER, INTENT(IN) :: n1, n2
      CHARACTER(LEN = *), INTENT(IN) :: str1, str2
      CHARACTER(LEN = maxlen) :: s1, s2
      IF(n1/=n2) CALL abort_gcm(TRIM(modname), 'value of "' // TRIM(str1) // '" = ' // TRIM(int2str(n1)) // &
              ' read in starting file differs from gcm value of "' // TRIM(str2) // '" = ' // TRIM(int2str(n2)), 1)
    END SUBROUTINE check_dim


    SUBROUTINE get_var1(var, v)
      CHARACTER(LEN = *), INTENT(IN) :: var
      REAL, INTENT(OUT) :: v(:)
      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
      CALL err(nf90_get_var(fID, vID, v), "get", var)
    END SUBROUTINE get_var1


    SUBROUTINE get_var2(var, v)
      CHARACTER(LEN = *), INTENT(IN) :: var
      REAL, INTENT(OUT) :: v(:, :)
      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
      CALL err(nf90_get_var(fID, vID, v), "get", var)
    END SUBROUTINE get_var2


    SUBROUTINE get_var3(var, v)
      CHARACTER(LEN = *), INTENT(IN) :: var
      REAL, INTENT(OUT) :: v(:, :, :)
      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
      CALL err(nf90_get_var(fID, vID, v), "get", var)
    END SUBROUTINE get_var3


    SUBROUTINE err(ierr, typ, nam)
      INTEGER, INTENT(IN) :: ierr   !--- NetCDF ERROR CODE
      CHARACTER(LEN = *), INTENT(IN) :: typ    !--- TYPE OF OPERATION
      CHARACTER(LEN = *), INTENT(IN) :: nam    !--- FIELD/FILE NAME
      IF(ierr==nf90_noerr) RETURN
      SELECT CASE(typ)
      CASE('inq');   mesg = "Field <" // TRIM(nam) // "> is missing"
      CASE('get');   mesg = "Reading failed for <" // TRIM(nam) // ">"
      CASE('open');  mesg = "File opening failed for <" // TRIM(nam) // ">"
      CASE('close'); mesg = "File closing failed for <" // TRIM(nam) // ">"
      END SELECT
      CALL ABORT_gcm(TRIM(modname), TRIM(mesg), ierr)
    END SUBROUTINE err

  END SUBROUTINE dynetat0
END MODULE lmdz_dynetat0