source: LMDZ6/branches/Amaury_dev/libf/dyn3d/lmdz_dynetat0.f90 @ 5218

Last change on this file since 5218 was 5192, checked in by abarral, 3 months ago

Remove obsolete lmdz_description.f90
Remove unused exner_hyb_m.F90 in 1D
Re-remove filtre from source in 1D makelmdz_fcm
File size: 10.9 KB
Line 
1MODULE lmdz_dynetat0
2  IMPLICIT NONE; PRIVATE
3  PUBLIC dynetat0
4CONTAINS
5
6  SUBROUTINE dynetat0(fichnom, vcov, ucov, teta, q, masse, ps, phis, time)
7
8    !-------------------------------------------------------------------------------
9    ! Authors: P. Le Van , L.Fairhead
10    !-------------------------------------------------------------------------------
11    ! Purpose: Initial state reading.
12    !-------------------------------------------------------------------------------
13    USE lmdz_infotrac, ONLY: nqtot, tracers, niso, iqIsoPha, iH2O, isoName
14    USE lmdz_strings, ONLY: maxlen, msg, strStack, real2str, int2str
15    USE netcdf, ONLY: nf90_open, nf90_nowrite, nf90_inq_varid, nf90_close, nf90_get_var, nf90_noerr
16    USE lmdz_readTracFiles, ONLY: new2oldH2O, newHNO3, oldHNO3, getKey
17    USE control_mod, ONLY: planet_type
18    USE lmdz_assert_eq, ONLY: assert_eq
19    USE comvert_mod, ONLY: pa, preff
20    USE comconst_mod, ONLY: cpp, daysec, dtvr, g, im, jm, kappa, lllm, omeg, rad
21    USE logic_mod, ONLY: fxyhypb, ysinus
22    USE serre_mod, ONLY: clon, clat, grossismx, grossismy
23    USE temps_mod, ONLY: annee_ref, day_ini, day_ref, itau_dyn, start_time
24    USE ener_mod, ONLY: etot0, ptot0, ztot0, stot0, ang0
25    USE lmdz_cppkeys_wrapper, ONLY: CPPKEY_INCA, CPPKEY_REPROBUS
26    USE lmdz_iniprint, ONLY: lunout, prt_level
27    USE lmdz_comgeom2
28    USE lmdz_strings, ONLY: strIdx
29
30    USE lmdz_dimensions, ONLY: iim, jjm, llm, ndm
31    USE lmdz_paramet
32    IMPLICIT NONE
33
34
35    !===============================================================================
36    ! Arguments:
37    CHARACTER(LEN = *), INTENT(IN) :: fichnom          !--- FILE NAME
38    REAL, INTENT(OUT) :: vcov(iip1, jjm, llm)        !--- V COVARIANT WIND
39    REAL, INTENT(OUT) :: ucov(iip1, jjp1, llm)        !--- U COVARIANT WIND
40    REAL, INTENT(OUT) :: teta(iip1, jjp1, llm)        !--- POTENTIAL TEMP.
41    REAL, INTENT(OUT) :: q(iip1, jjp1, llm, nqtot)  !--- TRACERS
42    REAL, INTENT(OUT) :: masse(iip1, jjp1, llm)        !--- MASS PER CELL
43    REAL, INTENT(OUT) :: ps(iip1, jjp1)            !--- GROUND PRESSURE
44    REAL, INTENT(OUT) :: phis(iip1, jjp1)            !--- GEOPOTENTIAL
45    !===============================================================================
46    ! Local variables:
47    CHARACTER(LEN = maxlen) :: mesg, var, modname, oldVar
48    INTEGER, PARAMETER :: length = 100
49    INTEGER :: iq, fID, vID, idecal, iqParent, iName, iZone, iPhase, ix
50    REAL :: time, tnat, alpha_ideal, tab_cntrl(length)    !--- RUN PARAMS TABLE
51    LOGICAL :: lSkip, ll
52    LOGICAL, PARAMETER :: tnat1 = .TRUE.
53    !-------------------------------------------------------------------------------
54    modname = "dynetat0"
55
56    !--- Initial state file opening
57    var = fichnom
58    CALL err(nf90_open(var, nf90_nowrite, fID), "open", var)
59    CALL get_var1("controle", tab_cntrl)
60
61    !!! AS: idecal is a hack to be able to read planeto starts...
62    !!!     .... while keeping everything OK for LMDZ EARTH
63    IF(planet_type=="generic") THEN
64      CALL msg('NOTE NOTE NOTE : Planeto-like start files', modname)
65      idecal = 4
66      annee_ref = 2000
67    ELSE
68      CALL msg('NOTE NOTE NOTE : Earth-like start files', modname)
69      idecal = 5
70      annee_ref = tab_cntrl(5)
71    END IF
72    im = tab_cntrl(1)
73    jm = tab_cntrl(2)
74    lllm = tab_cntrl(3)
75    day_ref = tab_cntrl(4)
76    rad = tab_cntrl(idecal + 1)
77    omeg = tab_cntrl(idecal + 2)
78    g = tab_cntrl(idecal + 3)
79    cpp = tab_cntrl(idecal + 4)
80    kappa = tab_cntrl(idecal + 5)
81    daysec = tab_cntrl(idecal + 6)
82    dtvr = tab_cntrl(idecal + 7)
83    etot0 = tab_cntrl(idecal + 8)
84    ptot0 = tab_cntrl(idecal + 9)
85    ztot0 = tab_cntrl(idecal + 10)
86    stot0 = tab_cntrl(idecal + 11)
87    ang0 = tab_cntrl(idecal + 12)
88    pa = tab_cntrl(idecal + 13)
89    preff = tab_cntrl(idecal + 14)
90
91    clon = tab_cntrl(idecal + 15)
92    clat = tab_cntrl(idecal + 16)
93    grossismx = tab_cntrl(idecal + 17)
94    grossismy = tab_cntrl(idecal + 18)
95
96    IF (tab_cntrl(idecal + 19)==1.)  THEN
97      fxyhypb = .TRUE.
98      !   dzoomx   = tab_cntrl(25)
99      !   dzoomy   = tab_cntrl(26)
100      !   taux     = tab_cntrl(28)
101      !   tauy     = tab_cntrl(29)
102    ELSE
103      fxyhypb = .FALSE.
104      ysinus = tab_cntrl(idecal + 22)==1.
105    END IF
106
107    day_ini = tab_cntrl(30)
108    itau_dyn = tab_cntrl(31)
109    start_time = tab_cntrl(32)
110
111    !-------------------------------------------------------------------------------
112    CALL msg('rad, omeg, g, cpp, kappa = ' // TRIM(strStack(real2str([rad, omeg, g, cpp, kappa]))), modname)
113    CALL check_dim(im, iim, 'im', 'im')
114    CALL check_dim(jm, jjm, 'jm', 'jm')
115    CALL check_dim(lllm, llm, 'lm', 'lllm')
116    CALL get_var1("rlonu", rlonu)
117    CALL get_var1("rlatu", rlatu)
118    CALL get_var1("rlonv", rlonv)
119    CALL get_var1("rlatv", rlatv)
120    CALL get_var2("cu", cu)
121    CALL get_var2("cv", cv)
122    CALL get_var2("aire", aire)
123    var = "temps"
124    IF(nf90_inq_varid(fID, var, vID)/=nf90_noerr) THEN
125      CALL msg('missing field <temps> ; trying with <Time>', modname)
126      var = "Time"
127      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
128    END IF
129    CALL err(nf90_get_var(fID, vID, time), "get", var)
130    CALL get_var2("phisinit", phis)
131    CALL get_var3("ucov", ucov)
132    CALL get_var3("vcov", vcov)
133    CALL get_var3("teta", teta)
134    CALL get_var3("masse", masse)
135    CALL get_var2("ps", ps)
136
137    !--- Tracers
138    ll = .FALSE.
139    IF (CPPKEY_REPROBUS) THEN
140      ll = nf90_inq_varid(fID, 'HNO3tot', vID) /= nf90_noerr                                 !--- DETECT OLD REPRO start.nc FILE
141    END IF
142    DO iq = 1, nqtot
143      var = tracers(iq)%name
144      oldVar = new2oldH2O(var)
145      lSkip = ll .AND. var == 'HNO3'                                                       !--- FORCE "HNO3_g" READING FOR "HNO3"
146      IF (CPPKEY_REPROBUS) THEN
147        ix = strIdx(newHNO3, var); IF(ix /= 0) oldVar = oldHNO3(ix)                          !--- REPROBUS HNO3 exceptions
148      END IF
149      IF (CPPKEY_INCA) THEN
150        IF(var == 'O3') oldVar = 'OX'                                                        !--- DEAL WITH INCA OZONE EXCEPTION
151      END IF
152      !--------------------------------------------------------------------------------------------------------------------------
153      IF(nf90_inq_varid(fID, var, vID) == nf90_noerr .AND. .NOT.lSkip) THEN                !=== REGULAR CASE: AVAILABLE VARIABLE
154        CALL err(nf90_get_var(fID, vID, q(:, :, :, iq)), "get", var)
155        !--------------------------------------------------------------------------------------------------------------------------
156      ELSE IF(nf90_inq_varid(fID, oldVar, vID) == nf90_noerr) THEN                         !=== TRY WITH ALTERNATE NAME
157        CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized to <' // TRIM(oldVar) // '>', modname)
158        CALL err(nf90_get_var(fID, vID, q(:, :, :, iq)), "get", oldVar)
159        !--------------------------------------------------------------------------------------------------------------------------
160      ELSE IF(tracers(iq)%iso_iGroup == iH2O .AND. niso > 0) THEN                          !=== WATER ISOTOPES
161        iName = tracers(iq)%iso_iName
162        iPhase = tracers(iq)%iso_iPhase
163        iqParent = tracers(iq)%iqParent
164        IF(tracers(iq)%iso_iZone == 0) THEN
165          IF (tnat1) THEN
166            tnat = 1.0
167            alpha_ideal = 1.0
168            WRITE(*, *) 'attention dans dynetat0: les alpha_ideal sont a 1'
169          else
170            IF(getKey('tnat', tnat, isoName(iName)) .OR. getKey('alpha', alpha_ideal, isoName(iName))) &
171                    CALL abort_gcm(TRIM(modname), 'missing isotopic parameters', 1)
172          endif
173          CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized with a simplified Rayleigh distillation law.', modname)
174          q(:, :, :, iq) = q(:, :, :, iqParent) * tnat * (q(:, :, :, iqParent) / 30.e-3)**(alpha_ideal - 1.)
175        ELSE
176          CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized to its parent isotope concentration.', modname)
177          ! Camille 9 mars 2023: attention!! seuls les tags qui correspondent à
178          ! izone=izone_init (définie dans isotrac_mod) sont initialisés comme
179          ! les parents. Sinon, c'est nul.
180          ! j'ai fait ça en attendant, mais il faudrait initialiser proprement en
181          ! remplacant 1 par izone_init dans la ligne qui suit.
182          IF(tracers(iq)%iso_iZone == 1) THEN
183            q(:, :, :, iq) = q(:, :, :, iqIsoPha(iName, iPhase))
184          ELSE
185            q(:, :, :, iq) = 0.
186          END IF
187        END IF
188        !--------------------------------------------------------------------------------------------------------------------------
189      ELSE                                                                                 !=== MISSING: SET TO 0
190        CALL msg('Tracer <' // TRIM(var) // '> is missing => initialized to zero', modname)
191        q(:, :, :, iq) = 0.
192        !--------------------------------------------------------------------------------------------------------------------------
193      END IF
194    END DO
195
196    CALL err(nf90_close(fID), "close", fichnom)
197    day_ini = day_ini + INT(time)
198    time = time - INT(time)
199
200
201  CONTAINS
202
203
204    SUBROUTINE check_dim(n1, n2, str1, str2)
205      INTEGER, INTENT(IN) :: n1, n2
206      CHARACTER(LEN = *), INTENT(IN) :: str1, str2
207      CHARACTER(LEN = maxlen) :: s1, s2
208      IF(n1/=n2) CALL abort_gcm(TRIM(modname), 'value of "' // TRIM(str1) // '" = ' // TRIM(int2str(n1)) // &
209              ' read in starting file differs from gcm value of "' // TRIM(str2) // '" = ' // TRIM(int2str(n2)), 1)
210    END SUBROUTINE check_dim
211
212
213    SUBROUTINE get_var1(var, v)
214      CHARACTER(LEN = *), INTENT(IN) :: var
215      REAL, INTENT(OUT) :: v(:)
216      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
217      CALL err(nf90_get_var(fID, vID, v), "get", var)
218    END SUBROUTINE get_var1
219
220
221    SUBROUTINE get_var2(var, v)
222      CHARACTER(LEN = *), INTENT(IN) :: var
223      REAL, INTENT(OUT) :: v(:, :)
224      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
225      CALL err(nf90_get_var(fID, vID, v), "get", var)
226    END SUBROUTINE get_var2
227
228
229    SUBROUTINE get_var3(var, v)
230      CHARACTER(LEN = *), INTENT(IN) :: var
231      REAL, INTENT(OUT) :: v(:, :, :)
232      CALL err(nf90_inq_varid(fID, var, vID), "inq", var)
233      CALL err(nf90_get_var(fID, vID, v), "get", var)
234    END SUBROUTINE get_var3
235
236
237    SUBROUTINE err(ierr, typ, nam)
238      INTEGER, INTENT(IN) :: ierr   !--- NetCDF ERROR CODE
239      CHARACTER(LEN = *), INTENT(IN) :: typ    !--- TYPE OF OPERATION
240      CHARACTER(LEN = *), INTENT(IN) :: nam    !--- FIELD/FILE NAME
241      IF(ierr==nf90_noerr) RETURN
242      SELECT CASE(typ)
243      CASE('inq');   mesg = "Field <" // TRIM(nam) // "> is missing"
244      CASE('get');   mesg = "Reading failed for <" // TRIM(nam) // ">"
245      CASE('open');  mesg = "File opening failed for <" // TRIM(nam) // ">"
246      CASE('close'); mesg = "File closing failed for <" // TRIM(nam) // ">"
247      END SELECT
248      CALL ABORT_gcm(TRIM(modname), TRIM(mesg), ierr)
249    END SUBROUTINE err
250
251  END SUBROUTINE dynetat0
252END MODULE lmdz_dynetat0
Note: See TracBrowser for help on using the repository browser.