Context Navigation

lmdz1d.F90 @ 3579

Last change on this file since 3579 was 2983, checked in by fhourdin, 7 years ago
Modification pour le cas ayotte au format standard. + correction pour le cas forcing_les (correspondant a forcing_type=0) partage par ayotte et rce_oce_les. Dans la nouvelle version, ce dernier correspond a forcing_type=-1 Attention aux problemes de retrocomptabilite.
File size: 47.4 KB

Rev	Line
[2239]	1	!#ifdef CPP_1D
	2	!#include "../dyn3d/mod_const_mpi.F90"
	3	!#include "../dyn3d_common/control_mod.F90"
	4	!#include "../dyn3d_common/infotrac.F90"
	5	!#include "../dyn3d_common/disvert.F90"
[2017]	6
	7
[2019]	8	PROGRAM lmdz1d
	9
[2393]	10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
	11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
	12	clwcon, detr_therm, &
	13	qsol, fevap, z0m, z0h, agesno, &
	14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
	15	falb_dir, falb_dif, &
	16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
[2402]	17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
[2635]	18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
	19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
	20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
	21	zgam, zmax0, zmea, zpic, zsig, &
[2933]	22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
	23	prlw_ancien, prsw_ancien, prw_ancien
[2672]	24
[2635]	25	USE dimphy
	26	USE surface_data, only : type_ocean,ok_veget
	27	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
	28	pbl_surface_final
	29	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
[2019]	30
[2635]	31	USE infotrac ! new
	32	USE control_mod
[2393]	33	USE indice_sol_mod
	34	USE phyaqua_mod
[2716]	35	! USE mod_1D_cases_read
	36	USE mod_1D_cases_read2
[2393]	37	USE mod_1D_amma_read
[2565]	38	USE print_control_mod, ONLY: lunout, prt_level
[2393]	39	USE iniphysiq_mod, ONLY: iniphysiq
	40	USE mod_const_mpi, ONLY: comm_lmdz
[2418]	41	USE physiq_mod, ONLY: physiq
[2602]	42	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
[2786]	43	preff, aps, bps, pseudoalt, scaleheight
[2601]	44	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
	45	itau_dyn, itau_phy, start_time
[2019]	46
	47	implicit none
	48	#include "dimensions.h"
	49	#include "YOMCST.h"
	50	!!#include "control.h"
	51	#include "clesphys.h"
	52	#include "dimsoil.h"
	53	!#include "indicesol.h"
	54
	55	#include "compar1d.h"
	56	#include "flux_arp.h"
[2332]	57	#include "date_cas.h"
[2019]	58	#include "tsoilnudge.h"
	59	#include "fcg_gcssold.h"
	60	!!!#include "fbforcing.h"
[2565]	61	#include "compbl.h"
[2019]	62
	63	!=====================================================================
	64	! DECLARATIONS
	65	!=====================================================================
	66
	67	!---------------------------------------------------------------------
	68	! Externals
	69	!---------------------------------------------------------------------
	70	external fq_sat
	71	real fq_sat
	72
	73	!---------------------------------------------------------------------
	74	! Arguments d' initialisations de la physique (USER DEFINE)
	75	!---------------------------------------------------------------------
	76
	77	integer, parameter :: ngrid=1
	78	real :: zcufi = 1.
	79	real :: zcvfi = 1.
	80
	81	!- real :: nat_surf
	82	!- logical :: ok_flux_surf
	83	!- real :: fsens
	84	!- real :: flat
	85	!- real :: tsurf
	86	!- real :: rugos
	87	!- real :: qsol(1:2)
	88	!- real :: qsurf
	89	!- real :: psurf
	90	!- real :: zsurf
	91	!- real :: albedo
	92	!-
	93	!- real :: time = 0.
	94	!- real :: time_ini
	95	!- real :: xlat
	96	!- real :: xlon
	97	!- real :: wtsurf
	98	!- real :: wqsurf
	99	!- real :: restart_runoff
	100	!- real :: xagesno
	101	!- real :: qsolinp
	102	!- real :: zpicinp
	103	!-
	104	real :: fnday
	105	real :: day, daytime
	106	real :: day1
	107	real :: heure
	108	integer :: jour
	109	integer :: mois
	110	integer :: an
	111
	112	!---------------------------------------------------------------------
	113	! Declarations related to forcing and initial profiles
	114	!---------------------------------------------------------------------
	115
	116	integer :: kmax = llm
	117	integer llm700,nq1,nq2
	118	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
	119	real timestep, frac
	120	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
	121	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
	122	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
	123	real dqtdxls(nlev_max),dqtdyls(nlev_max)
	124	real dqtdtls(nlev_max),thlpcar(nlev_max)
	125	real qprof(nlev_max,nqmx)
	126
	127	! integer :: forcing_type
	128	logical :: forcing_les = .false.
	129	logical :: forcing_armcu = .false.
	130	logical :: forcing_rico = .false.
	131	logical :: forcing_radconv = .false.
	132	logical :: forcing_toga = .false.
	133	logical :: forcing_twpice = .false.
	134	logical :: forcing_amma = .false.
[2126]	135	logical :: forcing_dice = .false.
[2672]	136	logical :: forcing_gabls4 = .false.
	137
[2019]	138	logical :: forcing_GCM2SCM = .false.
	139	logical :: forcing_GCSSold = .false.
	140	logical :: forcing_sandu = .false.
	141	logical :: forcing_astex = .false.
	142	logical :: forcing_fire = .false.
[2191]	143	logical :: forcing_case = .false.
[2716]	144	logical :: forcing_case2 = .false.
[2019]	145	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
	146	! (cf read_tsurf1d.F)
	147
	148	!vertical advection computation
	149	! real d_t_z(llm), d_q_z(llm)
[2393]	150	! real d_t_dyn_z(llm), dq_dyn_z(llm)
[2019]	151	! real zz(llm)
	152	! real zfact
	153
	154	!flag forcings
	155	logical :: nudge_wind=.true.
	156	logical :: nudge_thermo=.false.
	157	logical :: cptadvw=.true.
	158	!=====================================================================
	159	! DECLARATIONS FOR EACH CASE
	160	!=====================================================================
	161	!
	162	#include "1D_decl_cases.h"
	163	!
	164	!---------------------------------------------------------------------
[2181]	165	! Declarations related to nudging
	166	!---------------------------------------------------------------------
	167	integer :: nudge_max
	168	parameter (nudge_max=9)
	169	integer :: inudge_RHT=1
	170	integer :: inudge_UV=2
	171	logical :: nudge(nudge_max)
	172	real :: t_targ(llm)
	173	real :: rh_targ(llm)
	174	real :: u_targ(llm)
	175	real :: v_targ(llm)
	176	!
	177	!---------------------------------------------------------------------
[2019]	178	! Declarations related to vertical discretization:
	179	!---------------------------------------------------------------------
	180	real :: pzero=1.e5
	181	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
[2672]	182	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
[2019]	183
	184	!---------------------------------------------------------------------
	185	! Declarations related to variables
	186	!---------------------------------------------------------------------
	187
	188	real :: phi(llm)
	189	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
[2335]	190	REAL rot(1, llm) ! relative vorticity, in s-1
[2019]	191	real :: rlat_rad(1),rlon_rad(1)
	192	real :: omega(llm+1),omega2(llm),rho(llm+1)
	193	real :: ug(llm),vg(llm),fcoriolis
	194	real :: sfdt, cfdt
	195	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
	196	real :: dt_dyn(llm)
[2920]	197	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
[2181]	198	real :: d_u_nudge(llm),d_v_nudge(llm)
[2191]	199	real :: du_adv(llm),dv_adv(llm)
[2373]	200	real :: du_age(llm),dv_age(llm)
[2019]	201	real :: alpha
	202	real :: ttt
	203
	204	REAL, ALLOCATABLE, DIMENSION(:,:):: q
	205	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
	206	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
	207	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
[2181]	208	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
[2933]	209	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
[2019]	210
	211	!---------------------------------------------------------------------
	212	! Initialization of surface variables
	213	!---------------------------------------------------------------------
	214	real :: run_off_lic_0(1)
	215	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
	216	real :: tsoil(1,nsoilmx,nbsrf)
[2244]	217	! real :: agesno(1,nbsrf)
[2019]	218
	219	!---------------------------------------------------------------------
	220	! Call to phyredem
	221	!---------------------------------------------------------------------
	222	logical :: ok_writedem =.true.
[2126]	223	real :: sollw_in = 0.
	224	real :: solsw_in = 0.
[2019]	225
	226	!---------------------------------------------------------------------
	227	! Call to physiq
	228	!---------------------------------------------------------------------
	229	logical :: firstcall=.true.
	230	logical :: lastcall=.false.
[2418]	231	real :: phis(1) = 0.0
	232	real :: dpsrf(1)
[2019]	233
	234	!---------------------------------------------------------------------
	235	! Initializations of boundary conditions
	236	!---------------------------------------------------------------------
	237	integer, parameter :: yd = 360
	238	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
	239	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
	240	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
	241	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
	242	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
	243	real :: phy_ice (yd) = 0.0 ! Fraction de glace
	244	real :: phy_fter(yd) = 0.0 ! Fraction de terre
	245	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
	246	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
	247	real :: phy_flic(yd) = 0.0 ! Fraction de glace
	248
	249	!---------------------------------------------------------------------
	250	! Fichiers et d'autres variables
	251	!---------------------------------------------------------------------
	252	integer :: k,l,i,it=1,mxcalc
[2565]	253	integer :: nsrf
[2181]	254	integer jcode
[2019]	255	INTEGER read_climoz
[2611]	256	!
	257	integer :: it_end ! iteration number of the last call
[2019]	258	!Al1
	259	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
	260	data ecrit_slab_oc/-1/
[2611]	261	!
	262	! if flag_inhib_forcing = 0, tendencies of forcing are added
	263	! <> 0, tendencies of forcing are not added
	264	INTEGER :: flag_inhib_forcing = 0
[2019]	265
	266	!=====================================================================
	267	! INITIALIZATIONS
	268	!=====================================================================
[2373]	269	du_phys(:)=0.
	270	dv_phys(:)=0.
	271	dt_phys(:)=0.
	272	dt_dyn(:)=0.
	273	dt_cooling(:)=0.
[2920]	274	d_t_adv(:)=0.
[2373]	275	d_t_nudge(:)=0.
	276	d_u_nudge(:)=0.
	277	d_v_nudge(:)=0.
	278	du_adv(:)=0.
	279	dv_adv(:)=0.
	280	du_age(:)=0.
	281	dv_age(:)=0.
	282
[2019]	283	! Initialization of Common turb_forcing
	284	dtime_frcg = 0.
	285	Turb_fcg_gcssold=.false.
	286	hthturb_gcssold = 0.
	287	hqturb_gcssold = 0.
	288
	289	!---------------------------------------------------------------------
	290	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
	291	!---------------------------------------------------------------------
	292	!Al1
	293	call conf_unicol
	294	!Al1 moves this gcssold var from common fcg_gcssold to
	295	Turb_fcg_gcssold = xTurb_fcg_gcssold
	296	! --------------------------------------------------------------------
	297	close(1)
	298	!Al1
	299	write(,) 'lmdz1d.def lu => unicol.def'
	300
	301	! forcing_type defines the way the SCM is forced:
	302	!forcing_type = 0 ==> forcing_les = .true.
	303	! initial profiles from file prof.inp.001
	304	! no forcing by LS convergence ;
	305	! surface temperature imposed ;
	306	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
	307	!forcing_type = 1 ==> forcing_radconv = .true.
	308	! idem forcing_type = 0, but the imposed radiative cooling
	309	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
	310	! then there is no radiative cooling at all)
	311	!forcing_type = 2 ==> forcing_toga = .true.
	312	! initial profiles from TOGA-COARE IFA files
	313	! LS convergence and SST imposed from TOGA-COARE IFA files
	314	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
	315	! initial profiles from the GCM output
	316	! LS convergence imposed from the GCM output
	317	!forcing_type = 4 ==> forcing_twpice = .true.
	318	! initial profiles from TWP-ICE cdf file
	319	! LS convergence, omega and SST imposed from TWP-ICE files
	320	!forcing_type = 5 ==> forcing_rico = .true.
	321	! initial profiles from RICO files
	322	! LS convergence imposed from RICO files
	323	!forcing_type = 6 ==> forcing_amma = .true.
	324	! initial profiles from AMMA nc file
	325	! LS convergence, omega and surface fluxes imposed from AMMA file
[2126]	326	!forcing_type = 7 ==> forcing_dice = .true.
	327	! initial profiles and large scale forcings in dice_driver.nc
	328	! Different stages: soil model alone, atm. model alone
	329	! then both models coupled
[2672]	330	!forcing_type = 8 ==> forcing_gabls4 = .true.
	331	! initial profiles and large scale forcings in gabls4_driver.nc
[2332]	332	!forcing_type >= 100 ==> forcing_case = .true.
[2191]	333	! initial profiles and large scale forcings in cas.nc
	334	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
[2332]	335	! 101=cindynamo
	336	! 102=bomex
[2716]	337	!forcing_type >= 100 ==> forcing_case2 = .true.
	338	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
	339	! 103=arm_cu2 ie arm_cu with new forcing format
	340	! 104=rico2 ie rico with new forcing format
[2019]	341	!forcing_type = 40 ==> forcing_GCSSold = .true.
	342	! initial profile from GCSS file
	343	! LS convergence imposed from GCSS file
	344	!forcing_type = 50 ==> forcing_fire = .true.
	345	! forcing from fire.nc
	346	!forcing_type = 59 ==> forcing_sandu = .true.
	347	! initial profiles from sanduref file: see prof.inp.001
	348	! SST varying with time and divergence constante: see ifa_sanduref.txt file
	349	! Radiation has to be computed interactively
	350	!forcing_type = 60 ==> forcing_astex = .true.
	351	! initial profiles from file: see prof.inp.001
	352	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
	353	! Radiation has to be computed interactively
	354	!forcing_type = 61 ==> forcing_armcu = .true.
	355	! initial profiles from file: see prof.inp.001
	356	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
	357	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
	358	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
	359	! Radiation to be switched off
	360	!
[2983]	361	if (forcing_type <=0) THEN
[2019]	362	forcing_les = .true.
	363	elseif (forcing_type .eq.1) THEN
	364	forcing_radconv = .true.
	365	elseif (forcing_type .eq.2) THEN
	366	forcing_toga = .true.
	367	elseif (forcing_type .eq.3) THEN
	368	forcing_GCM2SCM = .true.
	369	elseif (forcing_type .eq.4) THEN
	370	forcing_twpice = .true.
	371	elseif (forcing_type .eq.5) THEN
	372	forcing_rico = .true.
	373	elseif (forcing_type .eq.6) THEN
	374	forcing_amma = .true.
[2126]	375	elseif (forcing_type .eq.7) THEN
	376	forcing_dice = .true.
[2672]	377	elseif (forcing_type .eq.8) THEN
	378	forcing_gabls4 = .true.
[2332]	379	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
[2191]	380	forcing_case = .true.
[2332]	381	year_ini_cas=2011
	382	mth_ini_cas=10
	383	day_deb=1
	384	heure_ini_cas=0.
	385	pdt_cas=3*3600. ! forcing frequency
	386	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
	387	forcing_case = .true.
	388	year_ini_cas=1969
	389	mth_ini_cas=6
	390	day_deb=24
	391	heure_ini_cas=0.
	392	pdt_cas=1800. ! forcing frequency
[2716]	393	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
	394	forcing_case2 = .true.
	395	year_ini_cas=1997
	396	mth_ini_cas=6
	397	day_deb=21
	398	heure_ini_cas=11.5
	399	pdt_cas=1800. ! forcing frequency
	400	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
	401	forcing_case2 = .true.
	402	year_ini_cas=2004
	403	mth_ini_cas=12
	404	day_deb=16
	405	heure_ini_cas=0.
	406	pdt_cas=1800. ! forcing frequency
[2920]	407	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
	408	forcing_case2 = .true.
	409	year_ini_cas=1969
	410	mth_ini_cas=6
	411	day_deb=24
	412	heure_ini_cas=0.
	413	pdt_cas=1800. ! forcing frequency
[2983]	414	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
	415	forcing_case2 = .true.
	416	year_ini_cas=1992
	417	mth_ini_cas=11
	418	day_deb=6
	419	heure_ini_cas=10.
	420	pdt_cas=86400. ! forcing frequency
[2019]	421	elseif (forcing_type .eq.40) THEN
	422	forcing_GCSSold = .true.
	423	elseif (forcing_type .eq.50) THEN
	424	forcing_fire = .true.
	425	elseif (forcing_type .eq.59) THEN
	426	forcing_sandu = .true.
	427	elseif (forcing_type .eq.60) THEN
	428	forcing_astex = .true.
	429	elseif (forcing_type .eq.61) THEN
	430	forcing_armcu = .true.
	431	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
	432	else
	433	write (,) 'ERROR : unknown forcing_type ', forcing_type
	434	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
	435	ENDIF
	436	print*,"forcing type=",forcing_type
	437
	438	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
	439	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
	440	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
	441	! through the common sst_forcing.
	442
	443	type_ts_forcing = 0
[2126]	444	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
[2019]	445	& type_ts_forcing = 1
[2181]	446	!
	447	! Initialization of the logical switch for nudging
	448	jcode = iflag_nudge
	449	do i = 1,nudge_max
	450	nudge(i) = mod(jcode,10) .ge. 1
	451	jcode = jcode/10
	452	enddo
[2019]	453	!---------------------------------------------------------------------
	454	! Definition of the run
	455	!---------------------------------------------------------------------
	456
[2221]	457	call conf_gcm( 99, .TRUE. )
[2019]	458	!-----------------------------------------------------------------------
	459	! Choix du calendrier
	460	! -------------------
	461
	462	! calend = 'earth_365d'
	463	if (calend == 'earth_360d') then
	464	call ioconf_calendar('360d')
	465	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
	466	else if (calend == 'earth_365d') then
	467	call ioconf_calendar('noleap')
	468	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
	469	else if (calend == 'earth_366d') then
	470	call ioconf_calendar('all_leap')
	471	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
	472	else if (calend == 'gregorian') then
	473	call ioconf_calendar('gregorian') ! not to be used by normal users
	474	write(,)'CALENDRIER CHOISI: Gregorien'
	475	else
	476	write (,) 'ERROR : unknown calendar ', calend
	477	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
	478	endif
	479	!-----------------------------------------------------------------------
	480	!
	481	!c Date :
	482	! La date est supposee donnee sous la forme [annee, numero du jour dans
	483	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
	484	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
	485	! Le numero du jour est dans "day". L heure est traitee separement.
	486	! La date complete est dans "daytime" (l'unite est le jour).
	487	if (nday>0) then
	488	fnday=nday
	489	else
	490	fnday=-nday/float(day_step)
	491	endif
[2332]	492	print *,'fnday=',fnday
[2716]	493	! start_time doit etre en FRACTION DE JOUR
[2465]	494	start_time=time_ini/24.
	495
[2019]	496	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
	497	IF(forcing_type .EQ. 61) fnday=53100./86400.
[2716]	498	IF(forcing_type .EQ. 103) fnday=53100./86400.
[2019]	499	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
	500	IF(forcing_type .EQ. 6) fnday=64800./86400.
[2126]	501	! IF(forcing_type .EQ. 6) fnday=50400./86400.
[2672]	502	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
[2019]	503	annee_ref = anneeref
	504	mois = 1
	505	day_ref = dayref
	506	heure = 0.
	507	itau_dyn = 0
	508	itau_phy = 0
	509	call ymds2ju(annee_ref,mois,day_ref,heure,day)
	510	day_ini = int(day)
	511	day_end = day_ini + fnday
	512
	513	IF (forcing_type .eq.2) THEN
	514	! Convert the initial date of Toga-Coare to Julian day
	515	call ymds2ju &
	516	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
	517
	518	ELSEIF (forcing_type .eq.4) THEN
	519	! Convert the initial date of TWPICE to Julian day
	520	call ymds2ju &
	521	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
	522	& ,day_ju_ini_twpi)
	523	ELSEIF (forcing_type .eq.6) THEN
	524	! Convert the initial date of AMMA to Julian day
	525	call ymds2ju &
	526	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
	527	& ,day_ju_ini_amma)
[2126]	528	ELSEIF (forcing_type .eq.7) THEN
	529	! Convert the initial date of DICE to Julian day
	530	call ymds2ju &
	531	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
	532	& ,day_ju_ini_dice)
[2672]	533	ELSEIF (forcing_type .eq.8 ) THEN
	534	! Convert the initial date of GABLS4 to Julian day
	535	call ymds2ju &
	536	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
	537	& ,day_ju_ini_gabls4)
[2332]	538	ELSEIF (forcing_type .gt.100) THEN
[2191]	539	! Convert the initial date to Julian day
[2332]	540	day_ini_cas=day_deb
	541	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
[2191]	542	call ymds2ju &
[2716]	543	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
[2191]	544	& ,day_ju_ini_cas)
[2332]	545	print*,'time case 2',day_ini_cas,day_ju_ini_cas
[2019]	546	ELSEIF (forcing_type .eq.59) THEN
	547	! Convert the initial date of Sandu case to Julian day
	548	call ymds2ju &
	549	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
	550	& time_ini*3600.,day_ju_ini_sandu)
	551
	552	ELSEIF (forcing_type .eq.60) THEN
	553	! Convert the initial date of Astex case to Julian day
	554	call ymds2ju &
	555	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
	556	& time_ini*3600.,day_ju_ini_astex)
	557
	558	ELSEIF (forcing_type .eq.61) THEN
	559	! Convert the initial date of Arm_cu case to Julian day
	560	call ymds2ju &
	561	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
	562	& ,day_ju_ini_armcu)
	563	ENDIF
	564
[2716]	565	IF (forcing_type .gt.100) THEN
	566	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
	567	ELSE
[2019]	568	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
[2716]	569	ENDIF
[2019]	570	! Print out the actual date of the beginning of the simulation :
	571	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
	572	print *,' Time of beginning : ', &
	573	& year_print, month_print, day_print, sec_print
	574
	575	!---------------------------------------------------------------------
	576	! Initialization of dimensions, geometry and initial state
	577	!---------------------------------------------------------------------
[2351]	578	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
[2354]	579	! but we still need to initialize dimphy module (klon,klev,etc.) here.
	580	call init_dimphy(1,llm)
[2019]	581	call suphel
	582	call infotrac_init
	583
	584	if (nqtot>nqmx) STOP'Augmenter nqmx dans lmdz1d.F'
	585	allocate(q(llm,nqtot)) ; q(:,:)=0.
	586	allocate(dq(llm,nqtot))
	587	allocate(dq_dyn(llm,nqtot))
	588	allocate(d_q_adv(llm,nqtot))
[2181]	589	allocate(d_q_nudge(llm,nqtot))
[2933]	590	! allocate(d_th_adv(llm))
[2019]	591
[2393]	592	q(:,:) = 0.
	593	dq(:,:) = 0.
	594	dq_dyn(:,:) = 0.
	595	d_q_adv(:,:) = 0.
	596	d_q_nudge(:,:) = 0.
	597
[2019]	598	!
	599	! No ozone climatology need be read in this pre-initialization
	600	! (phys_state_var_init is called again in physiq)
	601	read_climoz = 0
	602	!
	603	call phys_state_var_init(read_climoz)
	604
	605	if (ngrid.ne.klon) then
	606	print*,'stop in inifis'
	607	print*,'Probleme de dimensions :'
	608	print*,'ngrid = ',ngrid
	609	print*,'klon = ',klon
	610	stop
	611	endif
	612	!!!=====================================================================
	613	!!! Feedback forcing values for Gateaux differentiation (al1)
	614	!!!=====================================================================
	615	!!! Surface Planck forcing bracketing call radiation
	616	!! surf_Planck = 0.
	617	!! surf_Conv = 0.
	618	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
	619	!!! a mettre dans le lmdz1d.def ou autre
	620	!!
	621	!!
	622	qsol = qsolinp
	623	qsurf = fq_sat(tsurf,psurf/100.)
	624	day1= day_ini
	625	time=daytime-day
	626	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
	627	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
	628
	629	!
	630	!! mpl et jyg le 22/08/2012 :
	631	!! pour que les cas a flux de surface imposes marchent
	632	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
	633	fsens=-wtsurfrcpdrho(1)
	634	flat=-wqsurfrlvttrho(1)
	635	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
	636	ENDIF
	637	print*,'Flux sol ',fsens,flat
	638	!! ok_flux_surf=.false.
	639	!! fsens=-wtsurfrcpdrho(1)
	640	!! flat=-wqsurfrlvttrho(1)
	641	!!!!
	642
	643	! Vertical discretization and pressure levels at half and mid levels:
	644
	645	pa = 5e4
	646	!! preff= 1.01325e5
	647	preff = psurf
	648	IF (ok_old_disvert) THEN
	649	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
	650	print *,'On utilise disvert0'
[2786]	651	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
	652	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
	653	scaleheight=8.
	654	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
[2019]	655	ELSE
[2040]	656	call disvert()
[2019]	657	print *,'On utilise disvert'
	658	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
	659	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
	660	ENDIF
[2786]	661
[2019]	662	sig_s=presnivs/preff
	663	plev =ap+bp*psurf
	664	play = 0.5*(plev(1:llm)+plev(2:llm+1))
[2373]	665	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
[2019]	666
	667	IF (forcing_type .eq. 59) THEN
	668	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
	669	write(,) '***********************'
	670	do l = 1, llm
	671	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
	672	if (trouve_700 .and. play(l).le.70000) then
	673	llm700=l
	674	print *,'llm700,play=',llm700,play(l)/100.
	675	trouve_700= .false.
	676	endif
	677	enddo
	678	write(,) '***********************'
	679	ENDIF
	680
	681	!
	682	!=====================================================================
	683	! EVENTUALLY, READ FORCING DATA :
	684	!=====================================================================
	685
	686	#include "1D_read_forc_cases.h"
	687
	688	if (forcing_GCM2SCM) then
	689	write (,) 'forcing_GCM2SCM not yet implemented'
	690	stop 'in initialization'
	691	endif ! forcing_GCM2SCM
	692
	693	print*,'mxcalc=',mxcalc
[2373]	694	! print*,'zlay=',zlay(mxcalc)
[2019]	695	print*,'play=',play(mxcalc)
	696
[2332]	697	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
[2019]	698	ts_cur = tsurf ! SST used in read_tsurf1d
	699	!=====================================================================
	700	! Initialisation de la physique :
	701	!=====================================================================
	702
	703	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
	704	!
	705	! day_step, iphysiq lus dans gcm.def ci-dessus
	706	! timestep: calcule ci-dessous from rday et day_step
	707	! ngrid=1
	708	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
	709	! rday: defini dans suphel.F (86400.)
	710	! day_ini: lu dans run.def (dayref)
	711	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
	712	! airefi,zcufi,zcvfi initialises au debut de ce programme
	713	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
	714	day_step = float(nsplit_phys)*day_step/float(iphysiq)
	715	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
	716	timestep =rday/day_step
	717	dtime_frcg = timestep
	718	!
	719	zcufi=airefi
	720	zcvfi=airefi
	721	!
[2403]	722	rlat_rad(1)=xlat*rpi/180.
	723	rlon_rad(1)=xlon*rpi/180.
[2019]	724
[2347]	725	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
	726	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
	727	! with '0.' when necessary
[2351]	728	call iniphysiq(iim,jjm,llm, &
	729	1,comm_lmdz, &
	730	rday,day_ini,timestep, &
[2347]	731	(/rlat_rad(1),0./),(/0./), &
	732	(/0.,0./),(/rlon_rad(1),0./), &
	733	(/ (/airefi,0./),(/0.,0./) /), &
	734	(/zcufi,0.,0.,0./), &
	735	(/zcvfi,0./), &
	736	ra,rg,rd,rcpd,1)
[2019]	737	print*,'apres iniphysiq'
	738
	739	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
	740	co2_ppm= 330.0
	741	solaire=1370.0
	742
	743	! Ecriture du startphy avant le premier appel a la physique.
	744	! On le met juste avant pour avoir acces a tous les champs
	745
	746	if (ok_writedem) then
	747
	748	!--------------------------------------------------------------------------
	749	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
	750	! need : qsol fder snow qsurf evap rugos agesno ftsoil
	751	!--------------------------------------------------------------------------
	752
	753	type_ocean = "force"
	754	run_off_lic_0(1) = restart_runoff
	755	call fonte_neige_init(run_off_lic_0)
	756
	757	fder=0.
[2672]	758	snsrf(1,:)=snowmass ! masse de neige des sous surface
[2019]	759	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
[2244]	760	fevap=0.
	761	z0m(1,:)=rugos ! couverture de neige des sous surface
[2672]	762	z0h(1,:)=rugosh ! couverture de neige des sous surface
[2019]	763	agesno = xagesno
	764	tsoil(:,:,:)=tsurf
	765	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
	766	! tsoil(1,1,1)=299.18
	767	! tsoil(1,2,1)=300.08
	768	! tsoil(1,3,1)=301.88
	769	! tsoil(1,4,1)=305.48
	770	! tsoil(1,5,1)=308.00
	771	! tsoil(1,6,1)=308.00
	772	! tsoil(1,7,1)=308.00
	773	! tsoil(1,8,1)=308.00
	774	! tsoil(1,9,1)=308.00
	775	! tsoil(1,10,1)=308.00
	776	! tsoil(1,11,1)=308.00
	777	!-----------------------------------------------------------------------
[2244]	778	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
[2019]	779
	780	!------------------ prepare limit conditions for limit.nc -----------------
	781	!-- Ocean force
	782
	783	print*,'avant phyredem'
	784	pctsrf(1,:)=0.
[2672]	785	if (nat_surf.eq.0.) then
[2019]	786	pctsrf(1,is_oce)=1.
	787	pctsrf(1,is_ter)=0.
[2672]	788	pctsrf(1,is_lic)=0.
	789	pctsrf(1,is_sic)=0.
	790	else if (nat_surf .eq. 1) then
[2019]	791	pctsrf(1,is_oce)=0.
	792	pctsrf(1,is_ter)=1.
[2672]	793	pctsrf(1,is_lic)=0.
	794	pctsrf(1,is_sic)=0.
	795	else if (nat_surf .eq. 2) then
	796	pctsrf(1,is_oce)=0.
	797	pctsrf(1,is_ter)=0.
	798	pctsrf(1,is_lic)=1.
	799	pctsrf(1,is_sic)=0.
	800	else if (nat_surf .eq. 3) then
	801	pctsrf(1,is_oce)=0.
	802	pctsrf(1,is_ter)=0.
	803	pctsrf(1,is_lic)=0.
	804	pctsrf(1,is_sic)=1.
[2019]	805
[2672]	806	end if
	807
	808
[2019]	809	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
	810	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
	811
	812	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
	813	zpic = zpicinp
	814	ftsol=tsurf
[2237]	815	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
	816	! 6 albedo, mais on peut quand meme tourner avec
	817	! moins. Seules les 2 ou 4 premiers seront lus
	818	falb_dir=albedo
	819	falb_dif=albedo
[2019]	820	rugoro=rugos
	821	t_ancien(1,:)=temp(:)
	822	q_ancien(1,:)=q(:,1)
[2933]	823	ql_ancien = 0.
	824	qs_ancien = 0.
	825	prlw_ancien = 0.
	826	prsw_ancien = 0.
	827	prw_ancien = 0.
[2565]	828	!jyg<
	829	!! pbl_tke(:,:,:)=1.e-8
	830	pbl_tke(:,:,:)=0.
	831	pbl_tke(:,2,:)=1.e-2
	832	PRINT *, ' pbl_tke dans lmdz1d '
[2611]	833	if (prt_level .ge. 5) then
	834	DO nsrf = 1,4
	835	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
	836	ENDDO
	837	end if
[2019]	838
[2565]	839	!>jyg
	840
[2019]	841	rain_fall=0.
	842	snow_fall=0.
	843	solsw=0.
	844	sollw=0.
[2393]	845	sollwdown=rsigmatsurf*4
[2019]	846	radsol=0.
	847	rnebcon=0.
	848	ratqs=0.
	849	clwcon=0.
[2393]	850	zmax0 = 0.
[2019]	851	zmea=0.
	852	zstd=0.
	853	zsig=0.
	854	zgam=0.
	855	zval=0.
	856	zthe=0.
	857	sig1=0.
	858	w01=0.
[2393]	859	wake_cstar = 0.
	860	wake_deltaq = 0.
	861	wake_deltat = 0.
[2565]	862	wake_delta_pbl_TKE(:,:,:) = 0.
[2393]	863	delta_tsurf = 0.
	864	wake_fip = 0.
	865	wake_pe = 0.
	866	wake_s = 0.
[2635]	867	wake_dens = 0.
[2393]	868	ale_bl = 0.
	869	ale_bl_trig = 0.
	870	alp_bl = 0.
	871	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
	872	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
	873	entr_therm = 0.
	874	detr_therm = 0.
	875	f0 = 0.
	876	fm_therm = 0.
[2019]	877	u_ancien(1,:)=u(:)
	878	v_ancien(1,:)=v(:)
	879
	880	!------------------------------------------------------------------------
	881	! Make file containing restart for the physics (startphy.nc)
	882	!
	883	! NB: List of the variables to be written by phyredem (via put_field):
	884	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
	885	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
[2243]	886	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
[2393]	887	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
[2019]	888	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
[2255]	889	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
	890	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
[2635]	891	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
	892	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
[2565]	893	!
	894	! NB2: The content of the startphy.nc file depends on some flags defined in
	895	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
	896	! to be set at some arbitratry convenient values.
[2019]	897	!------------------------------------------------------------------------
	898	!Al1 =============== restart option ==========================
	899	if (.not.restart) then
[2565]	900	iflag_pbl = 5
[2019]	901	call phyredem ("startphy.nc")
	902	else
	903	! (desallocations)
	904	print*,'callin surf final'
[2243]	905	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
[2019]	906	print*,'after surf final'
	907	CALL fonte_neige_final(run_off_lic_0)
	908	endif
	909
	910	ok_writedem=.false.
	911	print*,'apres phyredem'
	912
	913	endif ! ok_writedem
	914
	915	!------------------------------------------------------------------------
	916	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
	917	! --------------------------------------------------
	918	! NB: List of the variables to be written in limit.nc
	919	! (by writelim.F, subroutine of 1DUTILS.h):
	920	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
	921	! phy_fter,phy_foce,phy_flic,phy_fsic)
	922	!------------------------------------------------------------------------
	923	do i=1,yd
	924	phy_nat(i) = nat_surf
	925	phy_alb(i) = albedo
	926	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
	927	phy_rug(i) = rugos
	928	phy_fter(i) = pctsrf(1,is_ter)
	929	phy_foce(i) = pctsrf(1,is_oce)
	930	phy_fsic(i) = pctsrf(1,is_sic)
	931	phy_flic(i) = pctsrf(1,is_lic)
	932	enddo
	933
	934	! fabrication de limit.nc
	935	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
	936	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
	937
	938
	939	call phys_state_var_end
	940	!Al1
	941	if (restart) then
	942	print*,'call to restart dyn 1d'
	943	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
	944	& u,v,temp,q,omega2)
	945
	946	print*,'fnday,annee_ref,day_ref,day_ini', &
	947	& fnday,annee_ref,day_ref,day_ini
	948	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
	949	day = day_ini
	950	day_end = day_ini + nday
	951	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	952
	953	! Print out the actual date of the beginning of the simulation :
	954	call ju2ymds(daytime, an, mois, jour, heure)
	955	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
	956
	957	day = int(daytime)
	958	time=daytime-day
	959
	960	print,'*** intialised fields from restart1dyn *****'
	961	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
	962	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
	963	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
	964	! raz for safety
	965	do l=1,llm
	966	dq_dyn(l,1) = 0.
	967	enddo
	968	endif
	969	!Al1 ================ end restart =================================
	970	IF (ecrit_slab_oc.eq.1) then
	971	open(97,file='div_slab.dat',STATUS='UNKNOWN')
	972	elseif (ecrit_slab_oc.eq.0) then
	973	open(97,file='div_slab.dat',STATUS='OLD')
	974	endif
[2181]	975	!
	976	!---------------------------------------------------------------------
	977	! Initialize target profile for RHT nudging if needed
	978	!---------------------------------------------------------------------
	979	if (nudge(inudge_RHT)) then
	980	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
	981	endif
	982	if (nudge(inudge_UV)) then
	983	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
	984	endif
	985	!
[2019]	986	!=====================================================================
	987	! START OF THE TEMPORAL LOOP :
	988	!=====================================================================
	989
[2611]	990	it_end = nint(fnday*day_step)
	991	!test JLD it_end = 10
	992	do while(it.le.it_end)
[2019]	993
	994	if (prt_level.ge.1) then
	995	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
[2611]	996	& it,day,time,it_end,day_step
[2019]	997	print*,'PAS DE TEMPS ',timestep
	998	endif
	999	!Al1 demande de restartphy.nc
[2611]	1000	if (it.eq.it_end) lastcall=.True.
[2019]	1001
	1002	!---------------------------------------------------------------------
	1003	! Interpolation of forcings in time and onto model levels
	1004	!---------------------------------------------------------------------
	1005
	1006	#include "1D_interp_cases.h"
	1007
	1008	if (forcing_GCM2SCM) then
	1009	write (,) 'forcing_GCM2SCM not yet implemented'
	1010	stop 'in time loop'
	1011	endif ! forcing_GCM2SCM
	1012
	1013	!---------------------------------------------------------------------
	1014	! Geopotential :
	1015	!---------------------------------------------------------------------
	1016
	1017	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
	1018	do l = 1, llm-1
	1019	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	1020	& (play(l)-play(l+1))/(play(l)+play(l+1))
	1021	enddo
	1022
	1023	!---------------------------------------------------------------------
	1024	! Listing output for debug prt_level>=1
	1025	!---------------------------------------------------------------------
	1026	if (prt_level>=1) then
	1027	print *,' avant physiq : -------- day time ',day,time
	1028	write(,) 'firstcall,lastcall,phis', &
	1029	& firstcall,lastcall,phis
[2611]	1030	end if
	1031	if (prt_level>=5) then
[2019]	1032	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
	1033	& 'presniv','plev','play','phi'
	1034	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
	1035	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1036	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
	1037	& 'presniv','u','v','temp','q1','q2','omega2'
	1038	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
	1039	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1040	endif
	1041
	1042	!---------------------------------------------------------------------
	1043	! Call physiq :
	1044	!---------------------------------------------------------------------
[2335]	1045	call physiq(ngrid,llm, &
[2600]	1046	firstcall,lastcall,timestep, &
	1047	plev,play,phi,phis,presnivs, &
	1048	u,v, rot, temp,q,omega2, &
	1049	du_phys,dv_phys,dt_phys,dq,dpsrf)
	1050	firstcall=.false.
[2019]	1051
	1052	!---------------------------------------------------------------------
[2611]	1053	! Listing output for debug
[2019]	1054	!---------------------------------------------------------------------
[2611]	1055	if (prt_level>=5) then
[2019]	1056	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
	1057	& 'presniv','plev','play','phi'
	1058	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
	1059	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1060	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
	1061	& 'presniv','u','v','temp','q1','q2','omega2'
	1062	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
	1063	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1064	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
	1065	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
	1066	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
	1067	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
	1068	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
	1069	write(,) 'dpsrf',dpsrf
	1070	endif
	1071	!---------------------------------------------------------------------
	1072	! Add physical tendencies :
	1073	!---------------------------------------------------------------------
	1074
	1075	fcoriolis=2.sin(rpixlat/180.)*romega
	1076	if (forcing_radconv .or. forcing_fire) then
	1077	fcoriolis=0.0
	1078	dt_cooling=0.0
[2920]	1079	d_t_adv=0.0
[2019]	1080	d_q_adv=0.0
	1081	endif
[2393]	1082	! print*, 'calcul de fcoriolis ', fcoriolis
[2019]	1083
	1084	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
[2716]	1085	& .or.forcing_amma .or. forcing_type.eq.101) then
[2019]	1086	fcoriolis=0.0 ; ug=0. ; vg=0.
	1087	endif
[2716]	1088
	1089	if(forcing_rico) then
[2019]	1090	dt_cooling=0.
[2716]	1091	endif
[2019]	1092
[2983]	1093	!CRio:Attention modif sp??cifique cas de Caroline
	1094	if (forcing_type==-1) then
[2933]	1095	fcoriolis=0.
	1096	!Nudging
	1097
	1098	!on calcule dt_cooling
	1099	do l=1,llm
	1100	if (play(l).ge.20000.) then
	1101	dt_cooling(l)=-1.5/86400.
	1102	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
	1103	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
	1104	else
	1105	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
	1106	endif
	1107	enddo
	1108
	1109	endif
	1110	!RC
	1111
[2611]	1112	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
[2393]	1113	fcoriolis, xlat,mxcalc
[2019]	1114
[2373]	1115	du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
[2019]	1116	dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
[2393]	1117	! print *,'u-ug=',u-ug
[2019]	1118
	1119	!!!!!!!!!!!!!!!!!!!!!!!!
	1120	! Geostrophic wind
	1121	!!!!!!!!!!!!!!!!!!!!!!!!
	1122	sfdt = sin(0.5fcoriolistimestep)
	1123	cfdt = cos(0.5fcoriolistimestep)
[2393]	1124	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
[2019]	1125	!
	1126	du_age(1:mxcalc)= -2.sfdt/timestep &
	1127	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
	1128	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1129	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1130	!
	1131	dv_age(1:mxcalc)= -2.sfdt/timestep &
	1132	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
	1133	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1134	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1135	!
[2181]	1136	!!!!!!!!!!!!!!!!!!!!!!!!
	1137	! Nudging
	1138	!!!!!!!!!!!!!!!!!!!!!!!!
	1139	d_t_nudge(:) = 0.
	1140	d_q_nudge(:,:) = 0.
	1141	d_u_nudge(:) = 0.
	1142	d_v_nudge(:) = 0.
	1143	if (nudge(inudge_RHT)) then
	1144	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
	1145	& d_t_nudge,d_q_nudge(:,1))
	1146	endif
	1147	if (nudge(inudge_UV)) then
	1148	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
	1149	& d_u_nudge,d_v_nudge)
	1150	endif
	1151	!
[2019]	1152	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1153	! call writefield_phy('dv_age' ,dv_age,llm)
	1154	! call writefield_phy('du_age' ,du_age,llm)
	1155	! call writefield_phy('du_phys' ,du_phys,llm)
	1156	! call writefield_phy('u_tend' ,u,llm)
	1157	! call writefield_phy('u_g' ,ug,llm)
	1158	!
	1159	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1160	!! Increment state variables
	1161	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2611]	1162	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
	1163
[2019]	1164	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
	1165	! au dessus de 700hpa, on relaxe vers les profils initiaux
	1166	if (forcing_sandu .OR. forcing_astex) then
	1167	#include "1D_nudge_sandu_astex.h"
	1168	else
	1169	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
	1170	& du_phys(1:mxcalc) &
[2191]	1171	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
[2181]	1172	& +d_u_nudge(1:mxcalc) )
[2019]	1173	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
	1174	& dv_phys(1:mxcalc) &
[2191]	1175	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
[2181]	1176	& +d_v_nudge(1:mxcalc) )
[2019]	1177	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
	1178	& dq(1:mxcalc,:) &
[2181]	1179	& +d_q_adv(1:mxcalc,:) &
	1180	& +d_q_nudge(1:mxcalc,:) )
[2019]	1181
[2611]	1182	if (prt_level.ge.3) then
[2019]	1183	print *, &
[2920]	1184	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
	1185	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
[2373]	1186	print* ,'dv_phys=',dv_phys
	1187	print* ,'dv_age=',dv_age
	1188	print* ,'dv_adv=',dv_adv
	1189	print* ,'d_v_nudge=',d_v_nudge
[2019]	1190	print*, v
	1191	print*, vg
	1192	endif
	1193
	1194	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
	1195	& dt_phys(1:mxcalc) &
[2920]	1196	& +d_t_adv(1:mxcalc) &
[2181]	1197	& +d_t_nudge(1:mxcalc) &
[2019]	1198	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
	1199
	1200	endif ! forcing_sandu or forcing_astex
	1201
	1202	teta=temp(pzero/play)*rkappa
	1203	!
	1204	!---------------------------------------------------------------------
	1205	! Nudge soil temperature if requested
	1206	!---------------------------------------------------------------------
	1207
[2565]	1208	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
[2019]	1209	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
	1210	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
	1211	ENDIF
	1212
	1213	!---------------------------------------------------------------------
	1214	! Add large-scale tendencies (advection, etc) :
	1215	!---------------------------------------------------------------------
	1216
	1217	!cc nrlmd
	1218	!cc tmpvar=teta
	1219	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1220	!cc
	1221	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
	1222	!cc tmpvar(:)=q(:,1)
	1223	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1224	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
	1225	!cc tmpvar(:)=q(:,2)
	1226	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1227	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
	1228
[2611]	1229	END IF ! end if tendency of tendency should be added
	1230
[2019]	1231	!---------------------------------------------------------------------
	1232	! Air temperature :
	1233	!---------------------------------------------------------------------
	1234	if (lastcall) then
	1235	print*,'Pas de temps final ',it
	1236	call ju2ymds(daytime, an, mois, jour, heure)
	1237	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
	1238	endif
	1239
	1240	! incremente day time
	1241	! print*,'daytime bef',daytime,1./day_step
	1242	daytime = daytime+1./day_step
	1243	!Al1dbg
	1244	day = int(daytime+0.1/day_step)
	1245	! time = max(daytime-day,0.0)
	1246	!Al1&jyg: correction de bug
	1247	!cc time = real(mod(it,day_step))/day_step
	1248	time = time_ini/24.+real(mod(it,day_step))/day_step
	1249	! print*,'daytime nxt time',daytime,time
	1250	it=it+1
	1251
	1252	enddo
	1253
	1254	!Al1
	1255	if (ecrit_slab_oc.ne.-1) close(97)
	1256
	1257	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
	1258	! -------------------------------------
	1259	call dyn1dredem("restart1dyn.nc", &
	1260	& plev,play,phi,phis,presnivs, &
	1261	& u,v,temp,q,omega2)
	1262
	1263	CALL abort_gcm ('lmdz1d ','The End ',0)
	1264
	1265	end
	1266
	1267	#include "1DUTILS.h"
	1268	#include "1Dconv.h"
	1269
[2239]	1270	!#endif
[2019]	1271
[2716]	1272

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format