Context Navigation

lmdz1d.F90 @ 2933

Last change on this file since 2933 was 2933, checked in by fhourdin, 7 years ago
Les insectes ont parfois une carapace solide. Correction d'une correction qui en avait oublié un précédente. (Frédéric pour Marie-Pierre)
File size: 47.2 KB

Line
1	!#ifdef CPP_1D
2	!#include "../dyn3d/mod_const_mpi.F90"
3	!#include "../dyn3d_common/control_mod.F90"
4	!#include "../dyn3d_common/infotrac.F90"
5	!#include "../dyn3d_common/disvert.F90"
6
7
8	PROGRAM lmdz1d
9
10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
12	clwcon, detr_therm, &
13	qsol, fevap, z0m, z0h, agesno, &
14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
15	falb_dir, falb_dif, &
16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
21	zgam, zmax0, zmea, zpic, zsig, &
22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
23	prlw_ancien, prsw_ancien, prw_ancien
24
25	USE dimphy
26	USE surface_data, only : type_ocean,ok_veget
27	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
28	pbl_surface_final
29	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
30
31	USE infotrac ! new
32	USE control_mod
33	USE indice_sol_mod
34	USE phyaqua_mod
35	! USE mod_1D_cases_read
36	USE mod_1D_cases_read2
37	USE mod_1D_amma_read
38	USE print_control_mod, ONLY: lunout, prt_level
39	USE iniphysiq_mod, ONLY: iniphysiq
40	USE mod_const_mpi, ONLY: comm_lmdz
41	USE physiq_mod, ONLY: physiq
42	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
43	preff, aps, bps, pseudoalt, scaleheight
44	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
45	itau_dyn, itau_phy, start_time
46
47	implicit none
48	#include "dimensions.h"
49	#include "YOMCST.h"
50	!!#include "control.h"
51	#include "clesphys.h"
52	#include "dimsoil.h"
53	!#include "indicesol.h"
54
55	#include "compar1d.h"
56	#include "flux_arp.h"
57	#include "date_cas.h"
58	#include "tsoilnudge.h"
59	#include "fcg_gcssold.h"
60	!!!#include "fbforcing.h"
61	#include "compbl.h"
62
63	!=====================================================================
64	! DECLARATIONS
65	!=====================================================================
66
67	!---------------------------------------------------------------------
68	! Externals
69	!---------------------------------------------------------------------
70	external fq_sat
71	real fq_sat
72
73	!---------------------------------------------------------------------
74	! Arguments d' initialisations de la physique (USER DEFINE)
75	!---------------------------------------------------------------------
76
77	integer, parameter :: ngrid=1
78	real :: zcufi = 1.
79	real :: zcvfi = 1.
80
81	!- real :: nat_surf
82	!- logical :: ok_flux_surf
83	!- real :: fsens
84	!- real :: flat
85	!- real :: tsurf
86	!- real :: rugos
87	!- real :: qsol(1:2)
88	!- real :: qsurf
89	!- real :: psurf
90	!- real :: zsurf
91	!- real :: albedo
92	!-
93	!- real :: time = 0.
94	!- real :: time_ini
95	!- real :: xlat
96	!- real :: xlon
97	!- real :: wtsurf
98	!- real :: wqsurf
99	!- real :: restart_runoff
100	!- real :: xagesno
101	!- real :: qsolinp
102	!- real :: zpicinp
103	!-
104	real :: fnday
105	real :: day, daytime
106	real :: day1
107	real :: heure
108	integer :: jour
109	integer :: mois
110	integer :: an
111
112	!---------------------------------------------------------------------
113	! Declarations related to forcing and initial profiles
114	!---------------------------------------------------------------------
115
116	integer :: kmax = llm
117	integer llm700,nq1,nq2
118	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
119	real timestep, frac
120	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
121	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
122	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
123	real dqtdxls(nlev_max),dqtdyls(nlev_max)
124	real dqtdtls(nlev_max),thlpcar(nlev_max)
125	real qprof(nlev_max,nqmx)
126
127	! integer :: forcing_type
128	logical :: forcing_les = .false.
129	logical :: forcing_armcu = .false.
130	logical :: forcing_rico = .false.
131	logical :: forcing_radconv = .false.
132	logical :: forcing_toga = .false.
133	logical :: forcing_twpice = .false.
134	logical :: forcing_amma = .false.
135	logical :: forcing_dice = .false.
136	logical :: forcing_gabls4 = .false.
137
138	logical :: forcing_GCM2SCM = .false.
139	logical :: forcing_GCSSold = .false.
140	logical :: forcing_sandu = .false.
141	logical :: forcing_astex = .false.
142	logical :: forcing_fire = .false.
143	logical :: forcing_case = .false.
144	logical :: forcing_case2 = .false.
145	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
146	! (cf read_tsurf1d.F)
147
148	!vertical advection computation
149	! real d_t_z(llm), d_q_z(llm)
150	! real d_t_dyn_z(llm), dq_dyn_z(llm)
151	! real zz(llm)
152	! real zfact
153
154	!flag forcings
155	logical :: nudge_wind=.true.
156	logical :: nudge_thermo=.false.
157	logical :: cptadvw=.true.
158	!=====================================================================
159	! DECLARATIONS FOR EACH CASE
160	!=====================================================================
161	!
162	#include "1D_decl_cases.h"
163	!
164	!---------------------------------------------------------------------
165	! Declarations related to nudging
166	!---------------------------------------------------------------------
167	integer :: nudge_max
168	parameter (nudge_max=9)
169	integer :: inudge_RHT=1
170	integer :: inudge_UV=2
171	logical :: nudge(nudge_max)
172	real :: t_targ(llm)
173	real :: rh_targ(llm)
174	real :: u_targ(llm)
175	real :: v_targ(llm)
176	!
177	!---------------------------------------------------------------------
178	! Declarations related to vertical discretization:
179	!---------------------------------------------------------------------
180	real :: pzero=1.e5
181	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
182	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
183
184	!---------------------------------------------------------------------
185	! Declarations related to variables
186	!---------------------------------------------------------------------
187
188	real :: phi(llm)
189	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
190	REAL rot(1, llm) ! relative vorticity, in s-1
191	real :: rlat_rad(1),rlon_rad(1)
192	real :: omega(llm+1),omega2(llm),rho(llm+1)
193	real :: ug(llm),vg(llm),fcoriolis
194	real :: sfdt, cfdt
195	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
196	real :: dt_dyn(llm)
197	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
198	real :: d_u_nudge(llm),d_v_nudge(llm)
199	real :: du_adv(llm),dv_adv(llm)
200	real :: du_age(llm),dv_age(llm)
201	real :: alpha
202	real :: ttt
203
204	REAL, ALLOCATABLE, DIMENSION(:,:):: q
205	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
206	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
207	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
208	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
209	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
210
211	!---------------------------------------------------------------------
212	! Initialization of surface variables
213	!---------------------------------------------------------------------
214	real :: run_off_lic_0(1)
215	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
216	real :: tsoil(1,nsoilmx,nbsrf)
217	! real :: agesno(1,nbsrf)
218
219	!---------------------------------------------------------------------
220	! Call to phyredem
221	!---------------------------------------------------------------------
222	logical :: ok_writedem =.true.
223	real :: sollw_in = 0.
224	real :: solsw_in = 0.
225
226	!---------------------------------------------------------------------
227	! Call to physiq
228	!---------------------------------------------------------------------
229	logical :: firstcall=.true.
230	logical :: lastcall=.false.
231	real :: phis(1) = 0.0
232	real :: dpsrf(1)
233
234	!---------------------------------------------------------------------
235	! Initializations of boundary conditions
236	!---------------------------------------------------------------------
237	integer, parameter :: yd = 360
238	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
239	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
240	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
241	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
242	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
243	real :: phy_ice (yd) = 0.0 ! Fraction de glace
244	real :: phy_fter(yd) = 0.0 ! Fraction de terre
245	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
246	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
247	real :: phy_flic(yd) = 0.0 ! Fraction de glace
248
249	!---------------------------------------------------------------------
250	! Fichiers et d'autres variables
251	!---------------------------------------------------------------------
252	integer :: k,l,i,it=1,mxcalc
253	integer :: nsrf
254	integer jcode
255	INTEGER read_climoz
256	!
257	integer :: it_end ! iteration number of the last call
258	!Al1
259	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
260	data ecrit_slab_oc/-1/
261	!
262	! if flag_inhib_forcing = 0, tendencies of forcing are added
263	! <> 0, tendencies of forcing are not added
264	INTEGER :: flag_inhib_forcing = 0
265
266	!=====================================================================
267	! INITIALIZATIONS
268	!=====================================================================
269	du_phys(:)=0.
270	dv_phys(:)=0.
271	dt_phys(:)=0.
272	dt_dyn(:)=0.
273	dt_cooling(:)=0.
274	d_t_adv(:)=0.
275	d_t_nudge(:)=0.
276	d_u_nudge(:)=0.
277	d_v_nudge(:)=0.
278	du_adv(:)=0.
279	dv_adv(:)=0.
280	du_age(:)=0.
281	dv_age(:)=0.
282
283	! Initialization of Common turb_forcing
284	dtime_frcg = 0.
285	Turb_fcg_gcssold=.false.
286	hthturb_gcssold = 0.
287	hqturb_gcssold = 0.
288
289	!---------------------------------------------------------------------
290	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
291	!---------------------------------------------------------------------
292	!Al1
293	call conf_unicol
294	!Al1 moves this gcssold var from common fcg_gcssold to
295	Turb_fcg_gcssold = xTurb_fcg_gcssold
296	! --------------------------------------------------------------------
297	close(1)
298	!Al1
299	write(,) 'lmdz1d.def lu => unicol.def'
300
301	! forcing_type defines the way the SCM is forced:
302	!forcing_type = 0 ==> forcing_les = .true.
303	! initial profiles from file prof.inp.001
304	! no forcing by LS convergence ;
305	! surface temperature imposed ;
306	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
307	!forcing_type = 1 ==> forcing_radconv = .true.
308	! idem forcing_type = 0, but the imposed radiative cooling
309	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
310	! then there is no radiative cooling at all)
311	!forcing_type = 2 ==> forcing_toga = .true.
312	! initial profiles from TOGA-COARE IFA files
313	! LS convergence and SST imposed from TOGA-COARE IFA files
314	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
315	! initial profiles from the GCM output
316	! LS convergence imposed from the GCM output
317	!forcing_type = 4 ==> forcing_twpice = .true.
318	! initial profiles from TWP-ICE cdf file
319	! LS convergence, omega and SST imposed from TWP-ICE files
320	!forcing_type = 5 ==> forcing_rico = .true.
321	! initial profiles from RICO files
322	! LS convergence imposed from RICO files
323	!forcing_type = 6 ==> forcing_amma = .true.
324	! initial profiles from AMMA nc file
325	! LS convergence, omega and surface fluxes imposed from AMMA file
326	!forcing_type = 7 ==> forcing_dice = .true.
327	! initial profiles and large scale forcings in dice_driver.nc
328	! Different stages: soil model alone, atm. model alone
329	! then both models coupled
330	!forcing_type = 8 ==> forcing_gabls4 = .true.
331	! initial profiles and large scale forcings in gabls4_driver.nc
332	!forcing_type >= 100 ==> forcing_case = .true.
333	! initial profiles and large scale forcings in cas.nc
334	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
335	! 101=cindynamo
336	! 102=bomex
337	!forcing_type >= 100 ==> forcing_case2 = .true.
338	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
339	! 103=arm_cu2 ie arm_cu with new forcing format
340	! 104=rico2 ie rico with new forcing format
341	!forcing_type = 40 ==> forcing_GCSSold = .true.
342	! initial profile from GCSS file
343	! LS convergence imposed from GCSS file
344	!forcing_type = 50 ==> forcing_fire = .true.
345	! forcing from fire.nc
346	!forcing_type = 59 ==> forcing_sandu = .true.
347	! initial profiles from sanduref file: see prof.inp.001
348	! SST varying with time and divergence constante: see ifa_sanduref.txt file
349	! Radiation has to be computed interactively
350	!forcing_type = 60 ==> forcing_astex = .true.
351	! initial profiles from file: see prof.inp.001
352	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
353	! Radiation has to be computed interactively
354	!forcing_type = 61 ==> forcing_armcu = .true.
355	! initial profiles from file: see prof.inp.001
356	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
357	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
358	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
359	! Radiation to be switched off
360	!
361	if (forcing_type .eq.0) THEN
362	forcing_les = .true.
363	elseif (forcing_type .eq.1) THEN
364	forcing_radconv = .true.
365	elseif (forcing_type .eq.2) THEN
366	forcing_toga = .true.
367	elseif (forcing_type .eq.3) THEN
368	forcing_GCM2SCM = .true.
369	elseif (forcing_type .eq.4) THEN
370	forcing_twpice = .true.
371	elseif (forcing_type .eq.5) THEN
372	forcing_rico = .true.
373	elseif (forcing_type .eq.6) THEN
374	forcing_amma = .true.
375	elseif (forcing_type .eq.7) THEN
376	forcing_dice = .true.
377	elseif (forcing_type .eq.8) THEN
378	forcing_gabls4 = .true.
379	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
380	forcing_case = .true.
381	year_ini_cas=2011
382	mth_ini_cas=10
383	day_deb=1
384	heure_ini_cas=0.
385	pdt_cas=3*3600. ! forcing frequency
386	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
387	forcing_case = .true.
388	year_ini_cas=1969
389	mth_ini_cas=6
390	day_deb=24
391	heure_ini_cas=0.
392	pdt_cas=1800. ! forcing frequency
393	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
394	forcing_case2 = .true.
395	year_ini_cas=1997
396	mth_ini_cas=6
397	day_deb=21
398	heure_ini_cas=11.5
399	pdt_cas=1800. ! forcing frequency
400	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
401	forcing_case2 = .true.
402	year_ini_cas=2004
403	mth_ini_cas=12
404	day_deb=16
405	heure_ini_cas=0.
406	pdt_cas=1800. ! forcing frequency
407	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
408	forcing_case2 = .true.
409	year_ini_cas=1969
410	mth_ini_cas=6
411	day_deb=24
412	heure_ini_cas=0.
413	pdt_cas=1800. ! forcing frequency
414	elseif (forcing_type .eq.40) THEN
415	forcing_GCSSold = .true.
416	elseif (forcing_type .eq.50) THEN
417	forcing_fire = .true.
418	elseif (forcing_type .eq.59) THEN
419	forcing_sandu = .true.
420	elseif (forcing_type .eq.60) THEN
421	forcing_astex = .true.
422	elseif (forcing_type .eq.61) THEN
423	forcing_armcu = .true.
424	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
425	else
426	write (,) 'ERROR : unknown forcing_type ', forcing_type
427	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
428	ENDIF
429	print*,"forcing type=",forcing_type
430
431	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
432	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
433	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
434	! through the common sst_forcing.
435
436	type_ts_forcing = 0
437	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
438	& type_ts_forcing = 1
439	!
440	! Initialization of the logical switch for nudging
441	jcode = iflag_nudge
442	do i = 1,nudge_max
443	nudge(i) = mod(jcode,10) .ge. 1
444	jcode = jcode/10
445	enddo
446	!---------------------------------------------------------------------
447	! Definition of the run
448	!---------------------------------------------------------------------
449
450	call conf_gcm( 99, .TRUE. )
451	!-----------------------------------------------------------------------
452	! Choix du calendrier
453	! -------------------
454
455	! calend = 'earth_365d'
456	if (calend == 'earth_360d') then
457	call ioconf_calendar('360d')
458	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
459	else if (calend == 'earth_365d') then
460	call ioconf_calendar('noleap')
461	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
462	else if (calend == 'earth_366d') then
463	call ioconf_calendar('all_leap')
464	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
465	else if (calend == 'gregorian') then
466	call ioconf_calendar('gregorian') ! not to be used by normal users
467	write(,)'CALENDRIER CHOISI: Gregorien'
468	else
469	write (,) 'ERROR : unknown calendar ', calend
470	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
471	endif
472	!-----------------------------------------------------------------------
473	!
474	!c Date :
475	! La date est supposee donnee sous la forme [annee, numero du jour dans
476	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
477	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
478	! Le numero du jour est dans "day". L heure est traitee separement.
479	! La date complete est dans "daytime" (l'unite est le jour).
480	if (nday>0) then
481	fnday=nday
482	else
483	fnday=-nday/float(day_step)
484	endif
485	print *,'fnday=',fnday
486	! start_time doit etre en FRACTION DE JOUR
487	start_time=time_ini/24.
488
489	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
490	IF(forcing_type .EQ. 61) fnday=53100./86400.
491	IF(forcing_type .EQ. 103) fnday=53100./86400.
492	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
493	IF(forcing_type .EQ. 6) fnday=64800./86400.
494	! IF(forcing_type .EQ. 6) fnday=50400./86400.
495	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
496	annee_ref = anneeref
497	mois = 1
498	day_ref = dayref
499	heure = 0.
500	itau_dyn = 0
501	itau_phy = 0
502	call ymds2ju(annee_ref,mois,day_ref,heure,day)
503	day_ini = int(day)
504	day_end = day_ini + fnday
505
506	IF (forcing_type .eq.2) THEN
507	! Convert the initial date of Toga-Coare to Julian day
508	call ymds2ju &
509	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
510
511	ELSEIF (forcing_type .eq.4) THEN
512	! Convert the initial date of TWPICE to Julian day
513	call ymds2ju &
514	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
515	& ,day_ju_ini_twpi)
516	ELSEIF (forcing_type .eq.6) THEN
517	! Convert the initial date of AMMA to Julian day
518	call ymds2ju &
519	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
520	& ,day_ju_ini_amma)
521	ELSEIF (forcing_type .eq.7) THEN
522	! Convert the initial date of DICE to Julian day
523	call ymds2ju &
524	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
525	& ,day_ju_ini_dice)
526	ELSEIF (forcing_type .eq.8 ) THEN
527	! Convert the initial date of GABLS4 to Julian day
528	call ymds2ju &
529	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
530	& ,day_ju_ini_gabls4)
531	ELSEIF (forcing_type .gt.100) THEN
532	! Convert the initial date to Julian day
533	day_ini_cas=day_deb
534	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
535	call ymds2ju &
536	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
537	& ,day_ju_ini_cas)
538	print*,'time case 2',day_ini_cas,day_ju_ini_cas
539	ELSEIF (forcing_type .eq.59) THEN
540	! Convert the initial date of Sandu case to Julian day
541	call ymds2ju &
542	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
543	& time_ini*3600.,day_ju_ini_sandu)
544
545	ELSEIF (forcing_type .eq.60) THEN
546	! Convert the initial date of Astex case to Julian day
547	call ymds2ju &
548	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
549	& time_ini*3600.,day_ju_ini_astex)
550
551	ELSEIF (forcing_type .eq.61) THEN
552	! Convert the initial date of Arm_cu case to Julian day
553	call ymds2ju &
554	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
555	& ,day_ju_ini_armcu)
556	ENDIF
557
558	IF (forcing_type .gt.100) THEN
559	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
560	ELSE
561	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
562	ENDIF
563	! Print out the actual date of the beginning of the simulation :
564	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
565	print *,' Time of beginning : ', &
566	& year_print, month_print, day_print, sec_print
567
568	!---------------------------------------------------------------------
569	! Initialization of dimensions, geometry and initial state
570	!---------------------------------------------------------------------
571	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
572	! but we still need to initialize dimphy module (klon,klev,etc.) here.
573	call init_dimphy(1,llm)
574	call suphel
575	call infotrac_init
576
577	if (nqtot>nqmx) STOP'Augmenter nqmx dans lmdz1d.F'
578	allocate(q(llm,nqtot)) ; q(:,:)=0.
579	allocate(dq(llm,nqtot))
580	allocate(dq_dyn(llm,nqtot))
581	allocate(d_q_adv(llm,nqtot))
582	allocate(d_q_nudge(llm,nqtot))
583	! allocate(d_th_adv(llm))
584
585	q(:,:) = 0.
586	dq(:,:) = 0.
587	dq_dyn(:,:) = 0.
588	d_q_adv(:,:) = 0.
589	d_q_nudge(:,:) = 0.
590
591	!
592	! No ozone climatology need be read in this pre-initialization
593	! (phys_state_var_init is called again in physiq)
594	read_climoz = 0
595	!
596	call phys_state_var_init(read_climoz)
597
598	if (ngrid.ne.klon) then
599	print*,'stop in inifis'
600	print*,'Probleme de dimensions :'
601	print*,'ngrid = ',ngrid
602	print*,'klon = ',klon
603	stop
604	endif
605	!!!=====================================================================
606	!!! Feedback forcing values for Gateaux differentiation (al1)
607	!!!=====================================================================
608	!!! Surface Planck forcing bracketing call radiation
609	!! surf_Planck = 0.
610	!! surf_Conv = 0.
611	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
612	!!! a mettre dans le lmdz1d.def ou autre
613	!!
614	!!
615	qsol = qsolinp
616	qsurf = fq_sat(tsurf,psurf/100.)
617	day1= day_ini
618	time=daytime-day
619	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
620	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
621
622	!
623	!! mpl et jyg le 22/08/2012 :
624	!! pour que les cas a flux de surface imposes marchent
625	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
626	fsens=-wtsurfrcpdrho(1)
627	flat=-wqsurfrlvttrho(1)
628	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
629	ENDIF
630	print*,'Flux sol ',fsens,flat
631	!! ok_flux_surf=.false.
632	!! fsens=-wtsurfrcpdrho(1)
633	!! flat=-wqsurfrlvttrho(1)
634	!!!!
635
636	! Vertical discretization and pressure levels at half and mid levels:
637
638	pa = 5e4
639	!! preff= 1.01325e5
640	preff = psurf
641	IF (ok_old_disvert) THEN
642	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
643	print *,'On utilise disvert0'
644	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
645	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
646	scaleheight=8.
647	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
648	ELSE
649	call disvert()
650	print *,'On utilise disvert'
651	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
652	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
653	ENDIF
654
655	sig_s=presnivs/preff
656	plev =ap+bp*psurf
657	play = 0.5*(plev(1:llm)+plev(2:llm+1))
658	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
659
660	IF (forcing_type .eq. 59) THEN
661	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
662	write(,) '***********************'
663	do l = 1, llm
664	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
665	if (trouve_700 .and. play(l).le.70000) then
666	llm700=l
667	print *,'llm700,play=',llm700,play(l)/100.
668	trouve_700= .false.
669	endif
670	enddo
671	write(,) '***********************'
672	ENDIF
673
674	!
675	!=====================================================================
676	! EVENTUALLY, READ FORCING DATA :
677	!=====================================================================
678
679	#include "1D_read_forc_cases.h"
680
681	if (forcing_GCM2SCM) then
682	write (,) 'forcing_GCM2SCM not yet implemented'
683	stop 'in initialization'
684	endif ! forcing_GCM2SCM
685
686	print*,'mxcalc=',mxcalc
687	! print*,'zlay=',zlay(mxcalc)
688	print*,'play=',play(mxcalc)
689
690	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
691	ts_cur = tsurf ! SST used in read_tsurf1d
692	!=====================================================================
693	! Initialisation de la physique :
694	!=====================================================================
695
696	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
697	!
698	! day_step, iphysiq lus dans gcm.def ci-dessus
699	! timestep: calcule ci-dessous from rday et day_step
700	! ngrid=1
701	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
702	! rday: defini dans suphel.F (86400.)
703	! day_ini: lu dans run.def (dayref)
704	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
705	! airefi,zcufi,zcvfi initialises au debut de ce programme
706	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
707	day_step = float(nsplit_phys)*day_step/float(iphysiq)
708	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
709	timestep =rday/day_step
710	dtime_frcg = timestep
711	!
712	zcufi=airefi
713	zcvfi=airefi
714	!
715	rlat_rad(1)=xlat*rpi/180.
716	rlon_rad(1)=xlon*rpi/180.
717
718	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
719	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
720	! with '0.' when necessary
721	call iniphysiq(iim,jjm,llm, &
722	1,comm_lmdz, &
723	rday,day_ini,timestep, &
724	(/rlat_rad(1),0./),(/0./), &
725	(/0.,0./),(/rlon_rad(1),0./), &
726	(/ (/airefi,0./),(/0.,0./) /), &
727	(/zcufi,0.,0.,0./), &
728	(/zcvfi,0./), &
729	ra,rg,rd,rcpd,1)
730	print*,'apres iniphysiq'
731
732	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
733	co2_ppm= 330.0
734	solaire=1370.0
735
736	! Ecriture du startphy avant le premier appel a la physique.
737	! On le met juste avant pour avoir acces a tous les champs
738
739	if (ok_writedem) then
740
741	!--------------------------------------------------------------------------
742	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
743	! need : qsol fder snow qsurf evap rugos agesno ftsoil
744	!--------------------------------------------------------------------------
745
746	type_ocean = "force"
747	run_off_lic_0(1) = restart_runoff
748	call fonte_neige_init(run_off_lic_0)
749
750	fder=0.
751	snsrf(1,:)=snowmass ! masse de neige des sous surface
752	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
753	fevap=0.
754	z0m(1,:)=rugos ! couverture de neige des sous surface
755	z0h(1,:)=rugosh ! couverture de neige des sous surface
756	agesno = xagesno
757	tsoil(:,:,:)=tsurf
758	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
759	! tsoil(1,1,1)=299.18
760	! tsoil(1,2,1)=300.08
761	! tsoil(1,3,1)=301.88
762	! tsoil(1,4,1)=305.48
763	! tsoil(1,5,1)=308.00
764	! tsoil(1,6,1)=308.00
765	! tsoil(1,7,1)=308.00
766	! tsoil(1,8,1)=308.00
767	! tsoil(1,9,1)=308.00
768	! tsoil(1,10,1)=308.00
769	! tsoil(1,11,1)=308.00
770	!-----------------------------------------------------------------------
771	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
772
773	!------------------ prepare limit conditions for limit.nc -----------------
774	!-- Ocean force
775
776	print*,'avant phyredem'
777	pctsrf(1,:)=0.
778	if (nat_surf.eq.0.) then
779	pctsrf(1,is_oce)=1.
780	pctsrf(1,is_ter)=0.
781	pctsrf(1,is_lic)=0.
782	pctsrf(1,is_sic)=0.
783	else if (nat_surf .eq. 1) then
784	pctsrf(1,is_oce)=0.
785	pctsrf(1,is_ter)=1.
786	pctsrf(1,is_lic)=0.
787	pctsrf(1,is_sic)=0.
788	else if (nat_surf .eq. 2) then
789	pctsrf(1,is_oce)=0.
790	pctsrf(1,is_ter)=0.
791	pctsrf(1,is_lic)=1.
792	pctsrf(1,is_sic)=0.
793	else if (nat_surf .eq. 3) then
794	pctsrf(1,is_oce)=0.
795	pctsrf(1,is_ter)=0.
796	pctsrf(1,is_lic)=0.
797	pctsrf(1,is_sic)=1.
798
799	end if
800
801
802	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
803	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
804
805	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
806	zpic = zpicinp
807	ftsol=tsurf
808	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
809	! 6 albedo, mais on peut quand meme tourner avec
810	! moins. Seules les 2 ou 4 premiers seront lus
811	falb_dir=albedo
812	falb_dif=albedo
813	rugoro=rugos
814	t_ancien(1,:)=temp(:)
815	q_ancien(1,:)=q(:,1)
816	ql_ancien = 0.
817	qs_ancien = 0.
818	prlw_ancien = 0.
819	prsw_ancien = 0.
820	prw_ancien = 0.
821	!jyg<
822	!! pbl_tke(:,:,:)=1.e-8
823	pbl_tke(:,:,:)=0.
824	pbl_tke(:,2,:)=1.e-2
825	PRINT *, ' pbl_tke dans lmdz1d '
826	if (prt_level .ge. 5) then
827	DO nsrf = 1,4
828	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
829	ENDDO
830	end if
831
832	!>jyg
833
834	rain_fall=0.
835	snow_fall=0.
836	solsw=0.
837	sollw=0.
838	sollwdown=rsigmatsurf*4
839	radsol=0.
840	rnebcon=0.
841	ratqs=0.
842	clwcon=0.
843	zmax0 = 0.
844	zmea=0.
845	zstd=0.
846	zsig=0.
847	zgam=0.
848	zval=0.
849	zthe=0.
850	sig1=0.
851	w01=0.
852	wake_cstar = 0.
853	wake_deltaq = 0.
854	wake_deltat = 0.
855	wake_delta_pbl_TKE(:,:,:) = 0.
856	delta_tsurf = 0.
857	wake_fip = 0.
858	wake_pe = 0.
859	wake_s = 0.
860	wake_dens = 0.
861	ale_bl = 0.
862	ale_bl_trig = 0.
863	alp_bl = 0.
864	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
865	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
866	entr_therm = 0.
867	detr_therm = 0.
868	f0 = 0.
869	fm_therm = 0.
870	u_ancien(1,:)=u(:)
871	v_ancien(1,:)=v(:)
872
873	!------------------------------------------------------------------------
874	! Make file containing restart for the physics (startphy.nc)
875	!
876	! NB: List of the variables to be written by phyredem (via put_field):
877	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
878	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
879	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
880	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
881	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
882	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
883	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
884	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
885	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
886	!
887	! NB2: The content of the startphy.nc file depends on some flags defined in
888	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
889	! to be set at some arbitratry convenient values.
890	!------------------------------------------------------------------------
891	!Al1 =============== restart option ==========================
892	if (.not.restart) then
893	iflag_pbl = 5
894	call phyredem ("startphy.nc")
895	else
896	! (desallocations)
897	print*,'callin surf final'
898	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
899	print*,'after surf final'
900	CALL fonte_neige_final(run_off_lic_0)
901	endif
902
903	ok_writedem=.false.
904	print*,'apres phyredem'
905
906	endif ! ok_writedem
907
908	!------------------------------------------------------------------------
909	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
910	! --------------------------------------------------
911	! NB: List of the variables to be written in limit.nc
912	! (by writelim.F, subroutine of 1DUTILS.h):
913	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
914	! phy_fter,phy_foce,phy_flic,phy_fsic)
915	!------------------------------------------------------------------------
916	do i=1,yd
917	phy_nat(i) = nat_surf
918	phy_alb(i) = albedo
919	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
920	phy_rug(i) = rugos
921	phy_fter(i) = pctsrf(1,is_ter)
922	phy_foce(i) = pctsrf(1,is_oce)
923	phy_fsic(i) = pctsrf(1,is_sic)
924	phy_flic(i) = pctsrf(1,is_lic)
925	enddo
926
927	! fabrication de limit.nc
928	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
929	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
930
931
932	call phys_state_var_end
933	!Al1
934	if (restart) then
935	print*,'call to restart dyn 1d'
936	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
937	& u,v,temp,q,omega2)
938
939	print*,'fnday,annee_ref,day_ref,day_ini', &
940	& fnday,annee_ref,day_ref,day_ini
941	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
942	day = day_ini
943	day_end = day_ini + nday
944	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
945
946	! Print out the actual date of the beginning of the simulation :
947	call ju2ymds(daytime, an, mois, jour, heure)
948	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
949
950	day = int(daytime)
951	time=daytime-day
952
953	print,'*** intialised fields from restart1dyn *****'
954	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
955	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
956	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
957	! raz for safety
958	do l=1,llm
959	dq_dyn(l,1) = 0.
960	enddo
961	endif
962	!Al1 ================ end restart =================================
963	IF (ecrit_slab_oc.eq.1) then
964	open(97,file='div_slab.dat',STATUS='UNKNOWN')
965	elseif (ecrit_slab_oc.eq.0) then
966	open(97,file='div_slab.dat',STATUS='OLD')
967	endif
968	!
969	!---------------------------------------------------------------------
970	! Initialize target profile for RHT nudging if needed
971	!---------------------------------------------------------------------
972	if (nudge(inudge_RHT)) then
973	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
974	endif
975	if (nudge(inudge_UV)) then
976	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
977	endif
978	!
979	!=====================================================================
980	! START OF THE TEMPORAL LOOP :
981	!=====================================================================
982
983	it_end = nint(fnday*day_step)
984	!test JLD it_end = 10
985	do while(it.le.it_end)
986
987	if (prt_level.ge.1) then
988	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
989	& it,day,time,it_end,day_step
990	print*,'PAS DE TEMPS ',timestep
991	endif
992	!Al1 demande de restartphy.nc
993	if (it.eq.it_end) lastcall=.True.
994
995	!---------------------------------------------------------------------
996	! Interpolation of forcings in time and onto model levels
997	!---------------------------------------------------------------------
998
999	#include "1D_interp_cases.h"
1000
1001	if (forcing_GCM2SCM) then
1002	write (,) 'forcing_GCM2SCM not yet implemented'
1003	stop 'in time loop'
1004	endif ! forcing_GCM2SCM
1005
1006	!---------------------------------------------------------------------
1007	! Geopotential :
1008	!---------------------------------------------------------------------
1009
1010	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1011	do l = 1, llm-1
1012	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1013	& (play(l)-play(l+1))/(play(l)+play(l+1))
1014	enddo
1015
1016	!---------------------------------------------------------------------
1017	! Listing output for debug prt_level>=1
1018	!---------------------------------------------------------------------
1019	if (prt_level>=1) then
1020	print *,' avant physiq : -------- day time ',day,time
1021	write(,) 'firstcall,lastcall,phis', &
1022	& firstcall,lastcall,phis
1023	end if
1024	if (prt_level>=5) then
1025	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1026	& 'presniv','plev','play','phi'
1027	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1028	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1029	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1030	& 'presniv','u','v','temp','q1','q2','omega2'
1031	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1032	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1033	endif
1034
1035	!---------------------------------------------------------------------
1036	! Call physiq :
1037	!---------------------------------------------------------------------
1038	call physiq(ngrid,llm, &
1039	firstcall,lastcall,timestep, &
1040	plev,play,phi,phis,presnivs, &
1041	u,v, rot, temp,q,omega2, &
1042	du_phys,dv_phys,dt_phys,dq,dpsrf)
1043	firstcall=.false.
1044
1045	!---------------------------------------------------------------------
1046	! Listing output for debug
1047	!---------------------------------------------------------------------
1048	if (prt_level>=5) then
1049	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1050	& 'presniv','plev','play','phi'
1051	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1052	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1053	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1054	& 'presniv','u','v','temp','q1','q2','omega2'
1055	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1056	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1057	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1058	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1059	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1060	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1061	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1062	write(,) 'dpsrf',dpsrf
1063	endif
1064	!---------------------------------------------------------------------
1065	! Add physical tendencies :
1066	!---------------------------------------------------------------------
1067
1068	fcoriolis=2.sin(rpixlat/180.)*romega
1069	if (forcing_radconv .or. forcing_fire) then
1070	fcoriolis=0.0
1071	dt_cooling=0.0
1072	d_t_adv=0.0
1073	d_q_adv=0.0
1074	endif
1075	! print*, 'calcul de fcoriolis ', fcoriolis
1076
1077	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1078	& .or.forcing_amma .or. forcing_type.eq.101) then
1079	fcoriolis=0.0 ; ug=0. ; vg=0.
1080	endif
1081
1082	if(forcing_rico) then
1083	dt_cooling=0.
1084	endif
1085
1086	!CRio:Attention modif spécifique cas de Caroline
1087	if (forcing_les) then
1088	fcoriolis=0.
1089	!Nudging
1090
1091	!on calcule dt_cooling
1092	do l=1,llm
1093	if (play(l).ge.20000.) then
1094	dt_cooling(l)=-1.5/86400.
1095	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
1096	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
1097	else
1098	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
1099	endif
1100	enddo
1101
1102	endif
1103	!RC
1104
1105	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1106	fcoriolis, xlat,mxcalc
1107
1108	du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1109	dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1110	! print *,'u-ug=',u-ug
1111
1112	!!!!!!!!!!!!!!!!!!!!!!!!
1113	! Geostrophic wind
1114	!!!!!!!!!!!!!!!!!!!!!!!!
1115	sfdt = sin(0.5fcoriolistimestep)
1116	cfdt = cos(0.5fcoriolistimestep)
1117	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1118	!
1119	du_age(1:mxcalc)= -2.sfdt/timestep &
1120	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1121	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1122	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1123	!
1124	dv_age(1:mxcalc)= -2.sfdt/timestep &
1125	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1126	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1127	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1128	!
1129	!!!!!!!!!!!!!!!!!!!!!!!!
1130	! Nudging
1131	!!!!!!!!!!!!!!!!!!!!!!!!
1132	d_t_nudge(:) = 0.
1133	d_q_nudge(:,:) = 0.
1134	d_u_nudge(:) = 0.
1135	d_v_nudge(:) = 0.
1136	if (nudge(inudge_RHT)) then
1137	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1138	& d_t_nudge,d_q_nudge(:,1))
1139	endif
1140	if (nudge(inudge_UV)) then
1141	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1142	& d_u_nudge,d_v_nudge)
1143	endif
1144	!
1145	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1146	! call writefield_phy('dv_age' ,dv_age,llm)
1147	! call writefield_phy('du_age' ,du_age,llm)
1148	! call writefield_phy('du_phys' ,du_phys,llm)
1149	! call writefield_phy('u_tend' ,u,llm)
1150	! call writefield_phy('u_g' ,ug,llm)
1151	!
1152	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1153	!! Increment state variables
1154	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1155	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1156
1157	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1158	! au dessus de 700hpa, on relaxe vers les profils initiaux
1159	if (forcing_sandu .OR. forcing_astex) then
1160	#include "1D_nudge_sandu_astex.h"
1161	else
1162	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1163	& du_phys(1:mxcalc) &
1164	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1165	& +d_u_nudge(1:mxcalc) )
1166	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1167	& dv_phys(1:mxcalc) &
1168	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1169	& +d_v_nudge(1:mxcalc) )
1170	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1171	& dq(1:mxcalc,:) &
1172	& +d_q_adv(1:mxcalc,:) &
1173	& +d_q_nudge(1:mxcalc,:) )
1174
1175	if (prt_level.ge.3) then
1176	print *, &
1177	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1178	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1179	print* ,'dv_phys=',dv_phys
1180	print* ,'dv_age=',dv_age
1181	print* ,'dv_adv=',dv_adv
1182	print* ,'d_v_nudge=',d_v_nudge
1183	print*, v
1184	print*, vg
1185	endif
1186
1187	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1188	& dt_phys(1:mxcalc) &
1189	& +d_t_adv(1:mxcalc) &
1190	& +d_t_nudge(1:mxcalc) &
1191	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1192
1193	endif ! forcing_sandu or forcing_astex
1194
1195	teta=temp(pzero/play)*rkappa
1196	!
1197	!---------------------------------------------------------------------
1198	! Nudge soil temperature if requested
1199	!---------------------------------------------------------------------
1200
1201	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1202	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1203	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1204	ENDIF
1205
1206	!---------------------------------------------------------------------
1207	! Add large-scale tendencies (advection, etc) :
1208	!---------------------------------------------------------------------
1209
1210	!cc nrlmd
1211	!cc tmpvar=teta
1212	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1213	!cc
1214	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1215	!cc tmpvar(:)=q(:,1)
1216	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1217	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1218	!cc tmpvar(:)=q(:,2)
1219	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1220	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1221
1222	END IF ! end if tendency of tendency should be added
1223
1224	!---------------------------------------------------------------------
1225	! Air temperature :
1226	!---------------------------------------------------------------------
1227	if (lastcall) then
1228	print*,'Pas de temps final ',it
1229	call ju2ymds(daytime, an, mois, jour, heure)
1230	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1231	endif
1232
1233	! incremente day time
1234	! print*,'daytime bef',daytime,1./day_step
1235	daytime = daytime+1./day_step
1236	!Al1dbg
1237	day = int(daytime+0.1/day_step)
1238	! time = max(daytime-day,0.0)
1239	!Al1&jyg: correction de bug
1240	!cc time = real(mod(it,day_step))/day_step
1241	time = time_ini/24.+real(mod(it,day_step))/day_step
1242	! print*,'daytime nxt time',daytime,time
1243	it=it+1
1244
1245	enddo
1246
1247	!Al1
1248	if (ecrit_slab_oc.ne.-1) close(97)
1249
1250	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1251	! -------------------------------------
1252	call dyn1dredem("restart1dyn.nc", &
1253	& plev,play,phi,phis,presnivs, &
1254	& u,v,temp,q,omega2)
1255
1256	CALL abort_gcm ('lmdz1d ','The End ',0)
1257
1258	end
1259
1260	#include "1DUTILS.h"
1261	#include "1Dconv.h"
1262
1263	!#endif
1264
1265

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format