Context Navigation

lmdz1d.F90 @ 2930

Last change on this file since 2930 was 2920, checked in by fhourdin, 7 years ago
Modification 1D pour le format standard (Marie-Pierre)
File size: 46.5 KB

Rev	Line
[2239]	1	!#ifdef CPP_1D
	2	!#include "../dyn3d/mod_const_mpi.F90"
	3	!#include "../dyn3d_common/control_mod.F90"
	4	!#include "../dyn3d_common/infotrac.F90"
	5	!#include "../dyn3d_common/disvert.F90"
[2017]	6
	7
[2019]	8	PROGRAM lmdz1d
	9
[2393]	10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
	11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
	12	clwcon, detr_therm, &
	13	qsol, fevap, z0m, z0h, agesno, &
	14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
	15	falb_dir, falb_dif, &
	16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
[2402]	17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
[2635]	18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
	19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
	20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
	21	zgam, zmax0, zmea, zpic, zsig, &
[2920]	22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl
[2672]	23
[2635]	24	USE dimphy
	25	USE surface_data, only : type_ocean,ok_veget
	26	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
	27	pbl_surface_final
	28	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
[2019]	29
[2635]	30	USE infotrac ! new
	31	USE control_mod
[2393]	32	USE indice_sol_mod
	33	USE phyaqua_mod
[2716]	34	! USE mod_1D_cases_read
	35	USE mod_1D_cases_read2
[2393]	36	USE mod_1D_amma_read
[2565]	37	USE print_control_mod, ONLY: lunout, prt_level
[2393]	38	USE iniphysiq_mod, ONLY: iniphysiq
	39	USE mod_const_mpi, ONLY: comm_lmdz
[2418]	40	USE physiq_mod, ONLY: physiq
[2602]	41	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
[2786]	42	preff, aps, bps, pseudoalt, scaleheight
[2601]	43	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
	44	itau_dyn, itau_phy, start_time
[2019]	45
	46	implicit none
	47	#include "dimensions.h"
	48	#include "YOMCST.h"
	49	!!#include "control.h"
	50	#include "clesphys.h"
	51	#include "dimsoil.h"
	52	!#include "indicesol.h"
	53
	54	#include "compar1d.h"
	55	#include "flux_arp.h"
[2332]	56	#include "date_cas.h"
[2019]	57	#include "tsoilnudge.h"
	58	#include "fcg_gcssold.h"
	59	!!!#include "fbforcing.h"
[2565]	60	#include "compbl.h"
[2019]	61
	62	!=====================================================================
	63	! DECLARATIONS
	64	!=====================================================================
	65
	66	!---------------------------------------------------------------------
	67	! Externals
	68	!---------------------------------------------------------------------
	69	external fq_sat
	70	real fq_sat
	71
	72	!---------------------------------------------------------------------
	73	! Arguments d' initialisations de la physique (USER DEFINE)
	74	!---------------------------------------------------------------------
	75
	76	integer, parameter :: ngrid=1
	77	real :: zcufi = 1.
	78	real :: zcvfi = 1.
	79
	80	!- real :: nat_surf
	81	!- logical :: ok_flux_surf
	82	!- real :: fsens
	83	!- real :: flat
	84	!- real :: tsurf
	85	!- real :: rugos
	86	!- real :: qsol(1:2)
	87	!- real :: qsurf
	88	!- real :: psurf
	89	!- real :: zsurf
	90	!- real :: albedo
	91	!-
	92	!- real :: time = 0.
	93	!- real :: time_ini
	94	!- real :: xlat
	95	!- real :: xlon
	96	!- real :: wtsurf
	97	!- real :: wqsurf
	98	!- real :: restart_runoff
	99	!- real :: xagesno
	100	!- real :: qsolinp
	101	!- real :: zpicinp
	102	!-
	103	real :: fnday
	104	real :: day, daytime
	105	real :: day1
	106	real :: heure
	107	integer :: jour
	108	integer :: mois
	109	integer :: an
	110
	111	!---------------------------------------------------------------------
	112	! Declarations related to forcing and initial profiles
	113	!---------------------------------------------------------------------
	114
	115	integer :: kmax = llm
	116	integer llm700,nq1,nq2
	117	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
	118	real timestep, frac
	119	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
	120	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
	121	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
	122	real dqtdxls(nlev_max),dqtdyls(nlev_max)
	123	real dqtdtls(nlev_max),thlpcar(nlev_max)
	124	real qprof(nlev_max,nqmx)
	125
	126	! integer :: forcing_type
	127	logical :: forcing_les = .false.
	128	logical :: forcing_armcu = .false.
	129	logical :: forcing_rico = .false.
	130	logical :: forcing_radconv = .false.
	131	logical :: forcing_toga = .false.
	132	logical :: forcing_twpice = .false.
	133	logical :: forcing_amma = .false.
[2126]	134	logical :: forcing_dice = .false.
[2672]	135	logical :: forcing_gabls4 = .false.
	136
[2019]	137	logical :: forcing_GCM2SCM = .false.
	138	logical :: forcing_GCSSold = .false.
	139	logical :: forcing_sandu = .false.
	140	logical :: forcing_astex = .false.
	141	logical :: forcing_fire = .false.
[2191]	142	logical :: forcing_case = .false.
[2716]	143	logical :: forcing_case2 = .false.
[2019]	144	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
	145	! (cf read_tsurf1d.F)
	146
	147	!vertical advection computation
	148	! real d_t_z(llm), d_q_z(llm)
[2393]	149	! real d_t_dyn_z(llm), dq_dyn_z(llm)
[2019]	150	! real zz(llm)
	151	! real zfact
	152
	153	!flag forcings
	154	logical :: nudge_wind=.true.
	155	logical :: nudge_thermo=.false.
	156	logical :: cptadvw=.true.
	157	!=====================================================================
	158	! DECLARATIONS FOR EACH CASE
	159	!=====================================================================
	160	!
	161	#include "1D_decl_cases.h"
	162	!
	163	!---------------------------------------------------------------------
[2181]	164	! Declarations related to nudging
	165	!---------------------------------------------------------------------
	166	integer :: nudge_max
	167	parameter (nudge_max=9)
	168	integer :: inudge_RHT=1
	169	integer :: inudge_UV=2
	170	logical :: nudge(nudge_max)
	171	real :: t_targ(llm)
	172	real :: rh_targ(llm)
	173	real :: u_targ(llm)
	174	real :: v_targ(llm)
	175	!
	176	!---------------------------------------------------------------------
[2019]	177	! Declarations related to vertical discretization:
	178	!---------------------------------------------------------------------
	179	real :: pzero=1.e5
	180	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
[2672]	181	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
[2019]	182
	183	!---------------------------------------------------------------------
	184	! Declarations related to variables
	185	!---------------------------------------------------------------------
	186
	187	real :: phi(llm)
	188	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
[2335]	189	REAL rot(1, llm) ! relative vorticity, in s-1
[2019]	190	real :: rlat_rad(1),rlon_rad(1)
	191	real :: omega(llm+1),omega2(llm),rho(llm+1)
	192	real :: ug(llm),vg(llm),fcoriolis
	193	real :: sfdt, cfdt
	194	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
	195	real :: dt_dyn(llm)
[2920]	196	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
[2181]	197	real :: d_u_nudge(llm),d_v_nudge(llm)
[2191]	198	real :: du_adv(llm),dv_adv(llm)
[2373]	199	real :: du_age(llm),dv_age(llm)
[2019]	200	real :: alpha
	201	real :: ttt
	202
	203	REAL, ALLOCATABLE, DIMENSION(:,:):: q
	204	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
	205	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
	206	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
[2181]	207	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
[2920]	208	! REAL, ALLOCATABLE, DIMENSION(:):: d_t_adv
[2019]	209
	210	!---------------------------------------------------------------------
	211	! Initialization of surface variables
	212	!---------------------------------------------------------------------
	213	real :: run_off_lic_0(1)
	214	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
	215	real :: tsoil(1,nsoilmx,nbsrf)
[2244]	216	! real :: agesno(1,nbsrf)
[2019]	217
	218	!---------------------------------------------------------------------
	219	! Call to phyredem
	220	!---------------------------------------------------------------------
	221	logical :: ok_writedem =.true.
[2126]	222	real :: sollw_in = 0.
	223	real :: solsw_in = 0.
[2019]	224
	225	!---------------------------------------------------------------------
	226	! Call to physiq
	227	!---------------------------------------------------------------------
	228	logical :: firstcall=.true.
	229	logical :: lastcall=.false.
[2418]	230	real :: phis(1) = 0.0
	231	real :: dpsrf(1)
[2019]	232
	233	!---------------------------------------------------------------------
	234	! Initializations of boundary conditions
	235	!---------------------------------------------------------------------
	236	integer, parameter :: yd = 360
	237	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
	238	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
	239	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
	240	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
	241	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
	242	real :: phy_ice (yd) = 0.0 ! Fraction de glace
	243	real :: phy_fter(yd) = 0.0 ! Fraction de terre
	244	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
	245	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
	246	real :: phy_flic(yd) = 0.0 ! Fraction de glace
	247
	248	!---------------------------------------------------------------------
	249	! Fichiers et d'autres variables
	250	!---------------------------------------------------------------------
	251	integer :: k,l,i,it=1,mxcalc
[2565]	252	integer :: nsrf
[2181]	253	integer jcode
[2019]	254	INTEGER read_climoz
[2611]	255	!
	256	integer :: it_end ! iteration number of the last call
[2019]	257	!Al1
	258	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
	259	data ecrit_slab_oc/-1/
[2611]	260	!
	261	! if flag_inhib_forcing = 0, tendencies of forcing are added
	262	! <> 0, tendencies of forcing are not added
	263	INTEGER :: flag_inhib_forcing = 0
[2019]	264
	265	!=====================================================================
	266	! INITIALIZATIONS
	267	!=====================================================================
[2373]	268	du_phys(:)=0.
	269	dv_phys(:)=0.
	270	dt_phys(:)=0.
	271	dt_dyn(:)=0.
	272	dt_cooling(:)=0.
[2920]	273	d_t_adv(:)=0.
[2373]	274	d_t_nudge(:)=0.
	275	d_u_nudge(:)=0.
	276	d_v_nudge(:)=0.
	277	du_adv(:)=0.
	278	dv_adv(:)=0.
	279	du_age(:)=0.
	280	dv_age(:)=0.
	281
[2019]	282	! Initialization of Common turb_forcing
	283	dtime_frcg = 0.
	284	Turb_fcg_gcssold=.false.
	285	hthturb_gcssold = 0.
	286	hqturb_gcssold = 0.
	287
	288	!---------------------------------------------------------------------
	289	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
	290	!---------------------------------------------------------------------
	291	!Al1
	292	call conf_unicol
	293	!Al1 moves this gcssold var from common fcg_gcssold to
	294	Turb_fcg_gcssold = xTurb_fcg_gcssold
	295	! --------------------------------------------------------------------
	296	close(1)
	297	!Al1
	298	write(,) 'lmdz1d.def lu => unicol.def'
	299
	300	! forcing_type defines the way the SCM is forced:
	301	!forcing_type = 0 ==> forcing_les = .true.
	302	! initial profiles from file prof.inp.001
	303	! no forcing by LS convergence ;
	304	! surface temperature imposed ;
	305	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
	306	!forcing_type = 1 ==> forcing_radconv = .true.
	307	! idem forcing_type = 0, but the imposed radiative cooling
	308	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
	309	! then there is no radiative cooling at all)
	310	!forcing_type = 2 ==> forcing_toga = .true.
	311	! initial profiles from TOGA-COARE IFA files
	312	! LS convergence and SST imposed from TOGA-COARE IFA files
	313	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
	314	! initial profiles from the GCM output
	315	! LS convergence imposed from the GCM output
	316	!forcing_type = 4 ==> forcing_twpice = .true.
	317	! initial profiles from TWP-ICE cdf file
	318	! LS convergence, omega and SST imposed from TWP-ICE files
	319	!forcing_type = 5 ==> forcing_rico = .true.
	320	! initial profiles from RICO files
	321	! LS convergence imposed from RICO files
	322	!forcing_type = 6 ==> forcing_amma = .true.
	323	! initial profiles from AMMA nc file
	324	! LS convergence, omega and surface fluxes imposed from AMMA file
[2126]	325	!forcing_type = 7 ==> forcing_dice = .true.
	326	! initial profiles and large scale forcings in dice_driver.nc
	327	! Different stages: soil model alone, atm. model alone
	328	! then both models coupled
[2672]	329	!forcing_type = 8 ==> forcing_gabls4 = .true.
	330	! initial profiles and large scale forcings in gabls4_driver.nc
[2332]	331	!forcing_type >= 100 ==> forcing_case = .true.
[2191]	332	! initial profiles and large scale forcings in cas.nc
	333	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
[2332]	334	! 101=cindynamo
	335	! 102=bomex
[2716]	336	!forcing_type >= 100 ==> forcing_case2 = .true.
	337	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
	338	! 103=arm_cu2 ie arm_cu with new forcing format
	339	! 104=rico2 ie rico with new forcing format
[2019]	340	!forcing_type = 40 ==> forcing_GCSSold = .true.
	341	! initial profile from GCSS file
	342	! LS convergence imposed from GCSS file
	343	!forcing_type = 50 ==> forcing_fire = .true.
	344	! forcing from fire.nc
	345	!forcing_type = 59 ==> forcing_sandu = .true.
	346	! initial profiles from sanduref file: see prof.inp.001
	347	! SST varying with time and divergence constante: see ifa_sanduref.txt file
	348	! Radiation has to be computed interactively
	349	!forcing_type = 60 ==> forcing_astex = .true.
	350	! initial profiles from file: see prof.inp.001
	351	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
	352	! Radiation has to be computed interactively
	353	!forcing_type = 61 ==> forcing_armcu = .true.
	354	! initial profiles from file: see prof.inp.001
	355	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
	356	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
	357	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
	358	! Radiation to be switched off
	359	!
	360	if (forcing_type .eq.0) THEN
	361	forcing_les = .true.
	362	elseif (forcing_type .eq.1) THEN
	363	forcing_radconv = .true.
	364	elseif (forcing_type .eq.2) THEN
	365	forcing_toga = .true.
	366	elseif (forcing_type .eq.3) THEN
	367	forcing_GCM2SCM = .true.
	368	elseif (forcing_type .eq.4) THEN
	369	forcing_twpice = .true.
	370	elseif (forcing_type .eq.5) THEN
	371	forcing_rico = .true.
	372	elseif (forcing_type .eq.6) THEN
	373	forcing_amma = .true.
[2126]	374	elseif (forcing_type .eq.7) THEN
	375	forcing_dice = .true.
[2672]	376	elseif (forcing_type .eq.8) THEN
	377	forcing_gabls4 = .true.
[2332]	378	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
[2191]	379	forcing_case = .true.
[2332]	380	year_ini_cas=2011
	381	mth_ini_cas=10
	382	day_deb=1
	383	heure_ini_cas=0.
	384	pdt_cas=3*3600. ! forcing frequency
	385	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
	386	forcing_case = .true.
	387	year_ini_cas=1969
	388	mth_ini_cas=6
	389	day_deb=24
	390	heure_ini_cas=0.
	391	pdt_cas=1800. ! forcing frequency
[2716]	392	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
	393	forcing_case2 = .true.
	394	year_ini_cas=1997
	395	mth_ini_cas=6
	396	day_deb=21
	397	heure_ini_cas=11.5
	398	pdt_cas=1800. ! forcing frequency
	399	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
	400	forcing_case2 = .true.
	401	year_ini_cas=2004
	402	mth_ini_cas=12
	403	day_deb=16
	404	heure_ini_cas=0.
	405	pdt_cas=1800. ! forcing frequency
[2920]	406	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
	407	forcing_case2 = .true.
	408	year_ini_cas=1969
	409	mth_ini_cas=6
	410	day_deb=24
	411	heure_ini_cas=0.
	412	pdt_cas=1800. ! forcing frequency
[2019]	413	elseif (forcing_type .eq.40) THEN
	414	forcing_GCSSold = .true.
	415	elseif (forcing_type .eq.50) THEN
	416	forcing_fire = .true.
	417	elseif (forcing_type .eq.59) THEN
	418	forcing_sandu = .true.
	419	elseif (forcing_type .eq.60) THEN
	420	forcing_astex = .true.
	421	elseif (forcing_type .eq.61) THEN
	422	forcing_armcu = .true.
	423	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
	424	else
	425	write (,) 'ERROR : unknown forcing_type ', forcing_type
	426	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
	427	ENDIF
	428	print*,"forcing type=",forcing_type
	429
	430	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
	431	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
	432	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
	433	! through the common sst_forcing.
	434
	435	type_ts_forcing = 0
[2126]	436	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
[2019]	437	& type_ts_forcing = 1
[2181]	438	!
	439	! Initialization of the logical switch for nudging
	440	jcode = iflag_nudge
	441	do i = 1,nudge_max
	442	nudge(i) = mod(jcode,10) .ge. 1
	443	jcode = jcode/10
	444	enddo
[2019]	445	!---------------------------------------------------------------------
	446	! Definition of the run
	447	!---------------------------------------------------------------------
	448
[2221]	449	call conf_gcm( 99, .TRUE. )
[2019]	450	!-----------------------------------------------------------------------
	451	! Choix du calendrier
	452	! -------------------
	453
	454	! calend = 'earth_365d'
	455	if (calend == 'earth_360d') then
	456	call ioconf_calendar('360d')
	457	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
	458	else if (calend == 'earth_365d') then
	459	call ioconf_calendar('noleap')
	460	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
	461	else if (calend == 'earth_366d') then
	462	call ioconf_calendar('all_leap')
	463	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
	464	else if (calend == 'gregorian') then
	465	call ioconf_calendar('gregorian') ! not to be used by normal users
	466	write(,)'CALENDRIER CHOISI: Gregorien'
	467	else
	468	write (,) 'ERROR : unknown calendar ', calend
	469	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
	470	endif
	471	!-----------------------------------------------------------------------
	472	!
	473	!c Date :
	474	! La date est supposee donnee sous la forme [annee, numero du jour dans
	475	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
	476	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
	477	! Le numero du jour est dans "day". L heure est traitee separement.
	478	! La date complete est dans "daytime" (l'unite est le jour).
	479	if (nday>0) then
	480	fnday=nday
	481	else
	482	fnday=-nday/float(day_step)
	483	endif
[2332]	484	print *,'fnday=',fnday
[2716]	485	! start_time doit etre en FRACTION DE JOUR
[2465]	486	start_time=time_ini/24.
	487
[2019]	488	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
	489	IF(forcing_type .EQ. 61) fnday=53100./86400.
[2716]	490	IF(forcing_type .EQ. 103) fnday=53100./86400.
[2019]	491	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
	492	IF(forcing_type .EQ. 6) fnday=64800./86400.
[2126]	493	! IF(forcing_type .EQ. 6) fnday=50400./86400.
[2672]	494	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
[2019]	495	annee_ref = anneeref
	496	mois = 1
	497	day_ref = dayref
	498	heure = 0.
	499	itau_dyn = 0
	500	itau_phy = 0
	501	call ymds2ju(annee_ref,mois,day_ref,heure,day)
	502	day_ini = int(day)
	503	day_end = day_ini + fnday
	504
	505	IF (forcing_type .eq.2) THEN
	506	! Convert the initial date of Toga-Coare to Julian day
	507	call ymds2ju &
	508	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
	509
	510	ELSEIF (forcing_type .eq.4) THEN
	511	! Convert the initial date of TWPICE to Julian day
	512	call ymds2ju &
	513	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
	514	& ,day_ju_ini_twpi)
	515	ELSEIF (forcing_type .eq.6) THEN
	516	! Convert the initial date of AMMA to Julian day
	517	call ymds2ju &
	518	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
	519	& ,day_ju_ini_amma)
[2126]	520	ELSEIF (forcing_type .eq.7) THEN
	521	! Convert the initial date of DICE to Julian day
	522	call ymds2ju &
	523	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
	524	& ,day_ju_ini_dice)
[2672]	525	ELSEIF (forcing_type .eq.8 ) THEN
	526	! Convert the initial date of GABLS4 to Julian day
	527	call ymds2ju &
	528	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
	529	& ,day_ju_ini_gabls4)
[2332]	530	ELSEIF (forcing_type .gt.100) THEN
[2191]	531	! Convert the initial date to Julian day
[2332]	532	day_ini_cas=day_deb
	533	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
[2191]	534	call ymds2ju &
[2716]	535	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
[2191]	536	& ,day_ju_ini_cas)
[2332]	537	print*,'time case 2',day_ini_cas,day_ju_ini_cas
[2019]	538	ELSEIF (forcing_type .eq.59) THEN
	539	! Convert the initial date of Sandu case to Julian day
	540	call ymds2ju &
	541	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
	542	& time_ini*3600.,day_ju_ini_sandu)
	543
	544	ELSEIF (forcing_type .eq.60) THEN
	545	! Convert the initial date of Astex case to Julian day
	546	call ymds2ju &
	547	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
	548	& time_ini*3600.,day_ju_ini_astex)
	549
	550	ELSEIF (forcing_type .eq.61) THEN
	551	! Convert the initial date of Arm_cu case to Julian day
	552	call ymds2ju &
	553	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
	554	& ,day_ju_ini_armcu)
	555	ENDIF
	556
[2716]	557	IF (forcing_type .gt.100) THEN
	558	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
	559	ELSE
[2019]	560	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
[2716]	561	ENDIF
[2019]	562	! Print out the actual date of the beginning of the simulation :
	563	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
	564	print *,' Time of beginning : ', &
	565	& year_print, month_print, day_print, sec_print
	566
	567	!---------------------------------------------------------------------
	568	! Initialization of dimensions, geometry and initial state
	569	!---------------------------------------------------------------------
[2351]	570	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
[2354]	571	! but we still need to initialize dimphy module (klon,klev,etc.) here.
	572	call init_dimphy(1,llm)
[2019]	573	call suphel
	574	call infotrac_init
	575
	576	if (nqtot>nqmx) STOP'Augmenter nqmx dans lmdz1d.F'
	577	allocate(q(llm,nqtot)) ; q(:,:)=0.
	578	allocate(dq(llm,nqtot))
	579	allocate(dq_dyn(llm,nqtot))
	580	allocate(d_q_adv(llm,nqtot))
[2181]	581	allocate(d_q_nudge(llm,nqtot))
[2920]	582	! allocate(d_t_adv(llm))
[2019]	583
[2393]	584	q(:,:) = 0.
	585	dq(:,:) = 0.
	586	dq_dyn(:,:) = 0.
	587	d_q_adv(:,:) = 0.
	588	d_q_nudge(:,:) = 0.
	589
[2019]	590	!
	591	! No ozone climatology need be read in this pre-initialization
	592	! (phys_state_var_init is called again in physiq)
	593	read_climoz = 0
	594	!
	595	call phys_state_var_init(read_climoz)
	596
	597	if (ngrid.ne.klon) then
	598	print*,'stop in inifis'
	599	print*,'Probleme de dimensions :'
	600	print*,'ngrid = ',ngrid
	601	print*,'klon = ',klon
	602	stop
	603	endif
	604	!!!=====================================================================
	605	!!! Feedback forcing values for Gateaux differentiation (al1)
	606	!!!=====================================================================
	607	!!! Surface Planck forcing bracketing call radiation
	608	!! surf_Planck = 0.
	609	!! surf_Conv = 0.
	610	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
	611	!!! a mettre dans le lmdz1d.def ou autre
	612	!!
	613	!!
	614	qsol = qsolinp
	615	qsurf = fq_sat(tsurf,psurf/100.)
	616	day1= day_ini
	617	time=daytime-day
	618	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
	619	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
	620
	621	!
	622	!! mpl et jyg le 22/08/2012 :
	623	!! pour que les cas a flux de surface imposes marchent
	624	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
	625	fsens=-wtsurfrcpdrho(1)
	626	flat=-wqsurfrlvttrho(1)
	627	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
	628	ENDIF
	629	print*,'Flux sol ',fsens,flat
	630	!! ok_flux_surf=.false.
	631	!! fsens=-wtsurfrcpdrho(1)
	632	!! flat=-wqsurfrlvttrho(1)
	633	!!!!
	634
	635	! Vertical discretization and pressure levels at half and mid levels:
	636
	637	pa = 5e4
	638	!! preff= 1.01325e5
	639	preff = psurf
	640	IF (ok_old_disvert) THEN
	641	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
	642	print *,'On utilise disvert0'
[2786]	643	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
	644	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
	645	scaleheight=8.
	646	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
[2019]	647	ELSE
[2040]	648	call disvert()
[2019]	649	print *,'On utilise disvert'
	650	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
	651	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
	652	ENDIF
[2786]	653
[2019]	654	sig_s=presnivs/preff
	655	plev =ap+bp*psurf
	656	play = 0.5*(plev(1:llm)+plev(2:llm+1))
[2373]	657	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
[2019]	658
	659	IF (forcing_type .eq. 59) THEN
	660	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
	661	write(,) '***********************'
	662	do l = 1, llm
	663	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
	664	if (trouve_700 .and. play(l).le.70000) then
	665	llm700=l
	666	print *,'llm700,play=',llm700,play(l)/100.
	667	trouve_700= .false.
	668	endif
	669	enddo
	670	write(,) '***********************'
	671	ENDIF
	672
	673	!
	674	!=====================================================================
	675	! EVENTUALLY, READ FORCING DATA :
	676	!=====================================================================
	677
	678	#include "1D_read_forc_cases.h"
	679
	680	if (forcing_GCM2SCM) then
	681	write (,) 'forcing_GCM2SCM not yet implemented'
	682	stop 'in initialization'
	683	endif ! forcing_GCM2SCM
	684
	685	print*,'mxcalc=',mxcalc
[2373]	686	! print*,'zlay=',zlay(mxcalc)
[2019]	687	print*,'play=',play(mxcalc)
	688
[2332]	689	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
[2019]	690	ts_cur = tsurf ! SST used in read_tsurf1d
	691	!=====================================================================
	692	! Initialisation de la physique :
	693	!=====================================================================
	694
	695	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
	696	!
	697	! day_step, iphysiq lus dans gcm.def ci-dessus
	698	! timestep: calcule ci-dessous from rday et day_step
	699	! ngrid=1
	700	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
	701	! rday: defini dans suphel.F (86400.)
	702	! day_ini: lu dans run.def (dayref)
	703	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
	704	! airefi,zcufi,zcvfi initialises au debut de ce programme
	705	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
	706	day_step = float(nsplit_phys)*day_step/float(iphysiq)
	707	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
	708	timestep =rday/day_step
	709	dtime_frcg = timestep
	710	!
	711	zcufi=airefi
	712	zcvfi=airefi
	713	!
[2403]	714	rlat_rad(1)=xlat*rpi/180.
	715	rlon_rad(1)=xlon*rpi/180.
[2019]	716
[2347]	717	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
	718	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
	719	! with '0.' when necessary
[2351]	720	call iniphysiq(iim,jjm,llm, &
	721	1,comm_lmdz, &
	722	rday,day_ini,timestep, &
[2347]	723	(/rlat_rad(1),0./),(/0./), &
	724	(/0.,0./),(/rlon_rad(1),0./), &
	725	(/ (/airefi,0./),(/0.,0./) /), &
	726	(/zcufi,0.,0.,0./), &
	727	(/zcvfi,0./), &
	728	ra,rg,rd,rcpd,1)
[2019]	729	print*,'apres iniphysiq'
	730
	731	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
	732	co2_ppm= 330.0
	733	solaire=1370.0
	734
	735	! Ecriture du startphy avant le premier appel a la physique.
	736	! On le met juste avant pour avoir acces a tous les champs
	737
	738	if (ok_writedem) then
	739
	740	!--------------------------------------------------------------------------
	741	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
	742	! need : qsol fder snow qsurf evap rugos agesno ftsoil
	743	!--------------------------------------------------------------------------
	744
	745	type_ocean = "force"
	746	run_off_lic_0(1) = restart_runoff
	747	call fonte_neige_init(run_off_lic_0)
	748
	749	fder=0.
[2672]	750	snsrf(1,:)=snowmass ! masse de neige des sous surface
[2019]	751	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
[2244]	752	fevap=0.
	753	z0m(1,:)=rugos ! couverture de neige des sous surface
[2672]	754	z0h(1,:)=rugosh ! couverture de neige des sous surface
[2019]	755	agesno = xagesno
	756	tsoil(:,:,:)=tsurf
	757	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
	758	! tsoil(1,1,1)=299.18
	759	! tsoil(1,2,1)=300.08
	760	! tsoil(1,3,1)=301.88
	761	! tsoil(1,4,1)=305.48
	762	! tsoil(1,5,1)=308.00
	763	! tsoil(1,6,1)=308.00
	764	! tsoil(1,7,1)=308.00
	765	! tsoil(1,8,1)=308.00
	766	! tsoil(1,9,1)=308.00
	767	! tsoil(1,10,1)=308.00
	768	! tsoil(1,11,1)=308.00
	769	!-----------------------------------------------------------------------
[2244]	770	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
[2019]	771
	772	!------------------ prepare limit conditions for limit.nc -----------------
	773	!-- Ocean force
	774
	775	print*,'avant phyredem'
	776	pctsrf(1,:)=0.
[2672]	777	if (nat_surf.eq.0.) then
[2019]	778	pctsrf(1,is_oce)=1.
	779	pctsrf(1,is_ter)=0.
[2672]	780	pctsrf(1,is_lic)=0.
	781	pctsrf(1,is_sic)=0.
	782	else if (nat_surf .eq. 1) then
[2019]	783	pctsrf(1,is_oce)=0.
	784	pctsrf(1,is_ter)=1.
[2672]	785	pctsrf(1,is_lic)=0.
	786	pctsrf(1,is_sic)=0.
	787	else if (nat_surf .eq. 2) then
	788	pctsrf(1,is_oce)=0.
	789	pctsrf(1,is_ter)=0.
	790	pctsrf(1,is_lic)=1.
	791	pctsrf(1,is_sic)=0.
	792	else if (nat_surf .eq. 3) then
	793	pctsrf(1,is_oce)=0.
	794	pctsrf(1,is_ter)=0.
	795	pctsrf(1,is_lic)=0.
	796	pctsrf(1,is_sic)=1.
[2019]	797
[2672]	798	end if
	799
	800
[2019]	801	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
	802	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
	803
	804	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
	805	zpic = zpicinp
	806	ftsol=tsurf
[2237]	807	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
	808	! 6 albedo, mais on peut quand meme tourner avec
	809	! moins. Seules les 2 ou 4 premiers seront lus
	810	falb_dir=albedo
	811	falb_dif=albedo
[2019]	812	rugoro=rugos
	813	t_ancien(1,:)=temp(:)
	814	q_ancien(1,:)=q(:,1)
[2565]	815	!jyg<
	816	!! pbl_tke(:,:,:)=1.e-8
	817	pbl_tke(:,:,:)=0.
	818	pbl_tke(:,2,:)=1.e-2
	819	PRINT *, ' pbl_tke dans lmdz1d '
[2611]	820	if (prt_level .ge. 5) then
	821	DO nsrf = 1,4
	822	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
	823	ENDDO
	824	end if
[2019]	825
[2565]	826	!>jyg
	827
[2019]	828	rain_fall=0.
	829	snow_fall=0.
	830	solsw=0.
	831	sollw=0.
[2393]	832	sollwdown=rsigmatsurf*4
[2019]	833	radsol=0.
	834	rnebcon=0.
	835	ratqs=0.
	836	clwcon=0.
[2393]	837	zmax0 = 0.
[2019]	838	zmea=0.
	839	zstd=0.
	840	zsig=0.
	841	zgam=0.
	842	zval=0.
	843	zthe=0.
	844	sig1=0.
	845	w01=0.
[2393]	846	wake_cstar = 0.
	847	wake_deltaq = 0.
	848	wake_deltat = 0.
[2565]	849	wake_delta_pbl_TKE(:,:,:) = 0.
[2393]	850	delta_tsurf = 0.
	851	wake_fip = 0.
	852	wake_pe = 0.
	853	wake_s = 0.
[2635]	854	wake_dens = 0.
[2393]	855	ale_bl = 0.
	856	ale_bl_trig = 0.
	857	alp_bl = 0.
	858	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
	859	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
	860	entr_therm = 0.
	861	detr_therm = 0.
	862	f0 = 0.
	863	fm_therm = 0.
[2019]	864	u_ancien(1,:)=u(:)
	865	v_ancien(1,:)=v(:)
	866
	867	!------------------------------------------------------------------------
	868	! Make file containing restart for the physics (startphy.nc)
	869	!
	870	! NB: List of the variables to be written by phyredem (via put_field):
	871	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
	872	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
[2243]	873	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
[2393]	874	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
[2019]	875	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
[2255]	876	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
	877	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
[2635]	878	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
	879	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
[2565]	880	!
	881	! NB2: The content of the startphy.nc file depends on some flags defined in
	882	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
	883	! to be set at some arbitratry convenient values.
[2019]	884	!------------------------------------------------------------------------
	885	!Al1 =============== restart option ==========================
	886	if (.not.restart) then
[2565]	887	iflag_pbl = 5
[2019]	888	call phyredem ("startphy.nc")
	889	else
	890	! (desallocations)
	891	print*,'callin surf final'
[2243]	892	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
[2019]	893	print*,'after surf final'
	894	CALL fonte_neige_final(run_off_lic_0)
	895	endif
	896
	897	ok_writedem=.false.
	898	print*,'apres phyredem'
	899
	900	endif ! ok_writedem
	901
	902	!------------------------------------------------------------------------
	903	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
	904	! --------------------------------------------------
	905	! NB: List of the variables to be written in limit.nc
	906	! (by writelim.F, subroutine of 1DUTILS.h):
	907	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
	908	! phy_fter,phy_foce,phy_flic,phy_fsic)
	909	!------------------------------------------------------------------------
	910	do i=1,yd
	911	phy_nat(i) = nat_surf
	912	phy_alb(i) = albedo
	913	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
	914	phy_rug(i) = rugos
	915	phy_fter(i) = pctsrf(1,is_ter)
	916	phy_foce(i) = pctsrf(1,is_oce)
	917	phy_fsic(i) = pctsrf(1,is_sic)
	918	phy_flic(i) = pctsrf(1,is_lic)
	919	enddo
	920
	921	! fabrication de limit.nc
	922	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
	923	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
	924
	925
	926	call phys_state_var_end
	927	!Al1
	928	if (restart) then
	929	print*,'call to restart dyn 1d'
	930	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
	931	& u,v,temp,q,omega2)
	932
	933	print*,'fnday,annee_ref,day_ref,day_ini', &
	934	& fnday,annee_ref,day_ref,day_ini
	935	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
	936	day = day_ini
	937	day_end = day_ini + nday
	938	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	939
	940	! Print out the actual date of the beginning of the simulation :
	941	call ju2ymds(daytime, an, mois, jour, heure)
	942	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
	943
	944	day = int(daytime)
	945	time=daytime-day
	946
	947	print,'*** intialised fields from restart1dyn *****'
	948	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
	949	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
	950	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
	951	! raz for safety
	952	do l=1,llm
	953	dq_dyn(l,1) = 0.
	954	enddo
	955	endif
	956	!Al1 ================ end restart =================================
	957	IF (ecrit_slab_oc.eq.1) then
	958	open(97,file='div_slab.dat',STATUS='UNKNOWN')
	959	elseif (ecrit_slab_oc.eq.0) then
	960	open(97,file='div_slab.dat',STATUS='OLD')
	961	endif
[2181]	962	!
	963	!---------------------------------------------------------------------
	964	! Initialize target profile for RHT nudging if needed
	965	!---------------------------------------------------------------------
	966	if (nudge(inudge_RHT)) then
	967	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
	968	endif
	969	if (nudge(inudge_UV)) then
	970	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
	971	endif
	972	!
[2019]	973	!=====================================================================
	974	! START OF THE TEMPORAL LOOP :
	975	!=====================================================================
	976
[2611]	977	it_end = nint(fnday*day_step)
	978	!test JLD it_end = 10
	979	do while(it.le.it_end)
[2019]	980
	981	if (prt_level.ge.1) then
	982	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
[2611]	983	& it,day,time,it_end,day_step
[2019]	984	print*,'PAS DE TEMPS ',timestep
	985	endif
	986	!Al1 demande de restartphy.nc
[2611]	987	if (it.eq.it_end) lastcall=.True.
[2019]	988
	989	!---------------------------------------------------------------------
	990	! Interpolation of forcings in time and onto model levels
	991	!---------------------------------------------------------------------
	992
	993	#include "1D_interp_cases.h"
	994
	995	if (forcing_GCM2SCM) then
	996	write (,) 'forcing_GCM2SCM not yet implemented'
	997	stop 'in time loop'
	998	endif ! forcing_GCM2SCM
	999
	1000	!---------------------------------------------------------------------
	1001	! Geopotential :
	1002	!---------------------------------------------------------------------
	1003
	1004	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
	1005	do l = 1, llm-1
	1006	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	1007	& (play(l)-play(l+1))/(play(l)+play(l+1))
	1008	enddo
	1009
	1010	!---------------------------------------------------------------------
	1011	! Listing output for debug prt_level>=1
	1012	!---------------------------------------------------------------------
	1013	if (prt_level>=1) then
	1014	print *,' avant physiq : -------- day time ',day,time
	1015	write(,) 'firstcall,lastcall,phis', &
	1016	& firstcall,lastcall,phis
[2611]	1017	end if
	1018	if (prt_level>=5) then
[2019]	1019	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
	1020	& 'presniv','plev','play','phi'
	1021	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
	1022	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1023	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
	1024	& 'presniv','u','v','temp','q1','q2','omega2'
	1025	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
	1026	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1027	endif
	1028
	1029	!---------------------------------------------------------------------
	1030	! Call physiq :
	1031	!---------------------------------------------------------------------
[2335]	1032	call physiq(ngrid,llm, &
[2600]	1033	firstcall,lastcall,timestep, &
	1034	plev,play,phi,phis,presnivs, &
	1035	u,v, rot, temp,q,omega2, &
	1036	du_phys,dv_phys,dt_phys,dq,dpsrf)
	1037	firstcall=.false.
[2019]	1038
	1039	!---------------------------------------------------------------------
[2611]	1040	! Listing output for debug
[2019]	1041	!---------------------------------------------------------------------
[2611]	1042	if (prt_level>=5) then
[2019]	1043	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
	1044	& 'presniv','plev','play','phi'
	1045	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
	1046	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1047	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
	1048	& 'presniv','u','v','temp','q1','q2','omega2'
	1049	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
	1050	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1051	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
	1052	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
	1053	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
	1054	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
	1055	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
	1056	write(,) 'dpsrf',dpsrf
	1057	endif
	1058	!---------------------------------------------------------------------
	1059	! Add physical tendencies :
	1060	!---------------------------------------------------------------------
	1061
	1062	fcoriolis=2.sin(rpixlat/180.)*romega
	1063	if (forcing_radconv .or. forcing_fire) then
	1064	fcoriolis=0.0
	1065	dt_cooling=0.0
[2920]	1066	d_t_adv=0.0
[2019]	1067	d_q_adv=0.0
	1068	endif
[2393]	1069	! print*, 'calcul de fcoriolis ', fcoriolis
[2019]	1070
	1071	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
[2716]	1072	& .or.forcing_amma .or. forcing_type.eq.101) then
[2019]	1073	fcoriolis=0.0 ; ug=0. ; vg=0.
	1074	endif
[2716]	1075
	1076	if(forcing_rico) then
[2019]	1077	dt_cooling=0.
[2716]	1078	endif
[2019]	1079
[2611]	1080	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
[2393]	1081	fcoriolis, xlat,mxcalc
[2019]	1082
[2373]	1083	du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
[2019]	1084	dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
[2393]	1085	! print *,'u-ug=',u-ug
[2019]	1086
	1087	!!!!!!!!!!!!!!!!!!!!!!!!
	1088	! Geostrophic wind
	1089	!!!!!!!!!!!!!!!!!!!!!!!!
	1090	sfdt = sin(0.5fcoriolistimestep)
	1091	cfdt = cos(0.5fcoriolistimestep)
[2393]	1092	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
[2019]	1093	!
	1094	du_age(1:mxcalc)= -2.sfdt/timestep &
	1095	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
	1096	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1097	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1098	!
	1099	dv_age(1:mxcalc)= -2.sfdt/timestep &
	1100	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
	1101	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1102	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1103	!
[2181]	1104	!!!!!!!!!!!!!!!!!!!!!!!!
	1105	! Nudging
	1106	!!!!!!!!!!!!!!!!!!!!!!!!
	1107	d_t_nudge(:) = 0.
	1108	d_q_nudge(:,:) = 0.
	1109	d_u_nudge(:) = 0.
	1110	d_v_nudge(:) = 0.
	1111	if (nudge(inudge_RHT)) then
	1112	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
	1113	& d_t_nudge,d_q_nudge(:,1))
	1114	endif
	1115	if (nudge(inudge_UV)) then
	1116	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
	1117	& d_u_nudge,d_v_nudge)
	1118	endif
	1119	!
[2019]	1120	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1121	! call writefield_phy('dv_age' ,dv_age,llm)
	1122	! call writefield_phy('du_age' ,du_age,llm)
	1123	! call writefield_phy('du_phys' ,du_phys,llm)
	1124	! call writefield_phy('u_tend' ,u,llm)
	1125	! call writefield_phy('u_g' ,ug,llm)
	1126	!
	1127	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1128	!! Increment state variables
	1129	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2611]	1130	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
	1131
[2019]	1132	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
	1133	! au dessus de 700hpa, on relaxe vers les profils initiaux
	1134	if (forcing_sandu .OR. forcing_astex) then
	1135	#include "1D_nudge_sandu_astex.h"
	1136	else
	1137	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
	1138	& du_phys(1:mxcalc) &
[2191]	1139	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
[2181]	1140	& +d_u_nudge(1:mxcalc) )
[2019]	1141	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
	1142	& dv_phys(1:mxcalc) &
[2191]	1143	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
[2181]	1144	& +d_v_nudge(1:mxcalc) )
[2019]	1145	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
	1146	& dq(1:mxcalc,:) &
[2181]	1147	& +d_q_adv(1:mxcalc,:) &
	1148	& +d_q_nudge(1:mxcalc,:) )
[2019]	1149
[2611]	1150	if (prt_level.ge.3) then
[2019]	1151	print *, &
[2920]	1152	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
	1153	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
[2373]	1154	print* ,'dv_phys=',dv_phys
	1155	print* ,'dv_age=',dv_age
	1156	print* ,'dv_adv=',dv_adv
	1157	print* ,'d_v_nudge=',d_v_nudge
[2019]	1158	print*, v
	1159	print*, vg
	1160	endif
	1161
	1162	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
	1163	& dt_phys(1:mxcalc) &
[2920]	1164	& +d_t_adv(1:mxcalc) &
[2181]	1165	& +d_t_nudge(1:mxcalc) &
[2019]	1166	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
	1167
	1168	endif ! forcing_sandu or forcing_astex
	1169
	1170	teta=temp(pzero/play)*rkappa
	1171	!
	1172	!---------------------------------------------------------------------
	1173	! Nudge soil temperature if requested
	1174	!---------------------------------------------------------------------
	1175
[2565]	1176	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
[2019]	1177	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
	1178	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
	1179	ENDIF
	1180
	1181	!---------------------------------------------------------------------
	1182	! Add large-scale tendencies (advection, etc) :
	1183	!---------------------------------------------------------------------
	1184
	1185	!cc nrlmd
	1186	!cc tmpvar=teta
	1187	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1188	!cc
	1189	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
	1190	!cc tmpvar(:)=q(:,1)
	1191	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1192	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
	1193	!cc tmpvar(:)=q(:,2)
	1194	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1195	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
	1196
[2611]	1197	END IF ! end if tendency of tendency should be added
	1198
[2019]	1199	!---------------------------------------------------------------------
	1200	! Air temperature :
	1201	!---------------------------------------------------------------------
	1202	if (lastcall) then
	1203	print*,'Pas de temps final ',it
	1204	call ju2ymds(daytime, an, mois, jour, heure)
	1205	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
	1206	endif
	1207
	1208	! incremente day time
	1209	! print*,'daytime bef',daytime,1./day_step
	1210	daytime = daytime+1./day_step
	1211	!Al1dbg
	1212	day = int(daytime+0.1/day_step)
	1213	! time = max(daytime-day,0.0)
	1214	!Al1&jyg: correction de bug
	1215	!cc time = real(mod(it,day_step))/day_step
	1216	time = time_ini/24.+real(mod(it,day_step))/day_step
	1217	! print*,'daytime nxt time',daytime,time
	1218	it=it+1
	1219
	1220	enddo
	1221
	1222	!Al1
	1223	if (ecrit_slab_oc.ne.-1) close(97)
	1224
	1225	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
	1226	! -------------------------------------
	1227	call dyn1dredem("restart1dyn.nc", &
	1228	& plev,play,phi,phis,presnivs, &
	1229	& u,v,temp,q,omega2)
	1230
	1231	CALL abort_gcm ('lmdz1d ','The End ',0)
	1232
	1233	end
	1234
	1235	#include "1DUTILS.h"
	1236	#include "1Dconv.h"
	1237
[2239]	1238	!#endif
[2019]	1239
[2716]	1240

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format