Context Navigation

lmdz1d.F90 @ 5423

Last change on this file since 5423 was 2920, checked in by fhourdin, 8 years ago
Modification 1D pour le format standard (Marie-Pierre)
File size: 46.5 KB

Line
1	!#ifdef CPP_1D
2	!#include "../dyn3d/mod_const_mpi.F90"
3	!#include "../dyn3d_common/control_mod.F90"
4	!#include "../dyn3d_common/infotrac.F90"
5	!#include "../dyn3d_common/disvert.F90"
6
7
8	PROGRAM lmdz1d
9
10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
12	clwcon, detr_therm, &
13	qsol, fevap, z0m, z0h, agesno, &
14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
15	falb_dir, falb_dif, &
16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
21	zgam, zmax0, zmea, zpic, zsig, &
22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl
23
24	USE dimphy
25	USE surface_data, only : type_ocean,ok_veget
26	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
27	pbl_surface_final
28	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
29
30	USE infotrac ! new
31	USE control_mod
32	USE indice_sol_mod
33	USE phyaqua_mod
34	! USE mod_1D_cases_read
35	USE mod_1D_cases_read2
36	USE mod_1D_amma_read
37	USE print_control_mod, ONLY: lunout, prt_level
38	USE iniphysiq_mod, ONLY: iniphysiq
39	USE mod_const_mpi, ONLY: comm_lmdz
40	USE physiq_mod, ONLY: physiq
41	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
42	preff, aps, bps, pseudoalt, scaleheight
43	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
44	itau_dyn, itau_phy, start_time
45
46	implicit none
47	#include "dimensions.h"
48	#include "YOMCST.h"
49	!!#include "control.h"
50	#include "clesphys.h"
51	#include "dimsoil.h"
52	!#include "indicesol.h"
53
54	#include "compar1d.h"
55	#include "flux_arp.h"
56	#include "date_cas.h"
57	#include "tsoilnudge.h"
58	#include "fcg_gcssold.h"
59	!!!#include "fbforcing.h"
60	#include "compbl.h"
61
62	!=====================================================================
63	! DECLARATIONS
64	!=====================================================================
65
66	!---------------------------------------------------------------------
67	! Externals
68	!---------------------------------------------------------------------
69	external fq_sat
70	real fq_sat
71
72	!---------------------------------------------------------------------
73	! Arguments d' initialisations de la physique (USER DEFINE)
74	!---------------------------------------------------------------------
75
76	integer, parameter :: ngrid=1
77	real :: zcufi = 1.
78	real :: zcvfi = 1.
79
80	!- real :: nat_surf
81	!- logical :: ok_flux_surf
82	!- real :: fsens
83	!- real :: flat
84	!- real :: tsurf
85	!- real :: rugos
86	!- real :: qsol(1:2)
87	!- real :: qsurf
88	!- real :: psurf
89	!- real :: zsurf
90	!- real :: albedo
91	!-
92	!- real :: time = 0.
93	!- real :: time_ini
94	!- real :: xlat
95	!- real :: xlon
96	!- real :: wtsurf
97	!- real :: wqsurf
98	!- real :: restart_runoff
99	!- real :: xagesno
100	!- real :: qsolinp
101	!- real :: zpicinp
102	!-
103	real :: fnday
104	real :: day, daytime
105	real :: day1
106	real :: heure
107	integer :: jour
108	integer :: mois
109	integer :: an
110
111	!---------------------------------------------------------------------
112	! Declarations related to forcing and initial profiles
113	!---------------------------------------------------------------------
114
115	integer :: kmax = llm
116	integer llm700,nq1,nq2
117	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
118	real timestep, frac
119	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
120	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
121	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
122	real dqtdxls(nlev_max),dqtdyls(nlev_max)
123	real dqtdtls(nlev_max),thlpcar(nlev_max)
124	real qprof(nlev_max,nqmx)
125
126	! integer :: forcing_type
127	logical :: forcing_les = .false.
128	logical :: forcing_armcu = .false.
129	logical :: forcing_rico = .false.
130	logical :: forcing_radconv = .false.
131	logical :: forcing_toga = .false.
132	logical :: forcing_twpice = .false.
133	logical :: forcing_amma = .false.
134	logical :: forcing_dice = .false.
135	logical :: forcing_gabls4 = .false.
136
137	logical :: forcing_GCM2SCM = .false.
138	logical :: forcing_GCSSold = .false.
139	logical :: forcing_sandu = .false.
140	logical :: forcing_astex = .false.
141	logical :: forcing_fire = .false.
142	logical :: forcing_case = .false.
143	logical :: forcing_case2 = .false.
144	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
145	! (cf read_tsurf1d.F)
146
147	!vertical advection computation
148	! real d_t_z(llm), d_q_z(llm)
149	! real d_t_dyn_z(llm), dq_dyn_z(llm)
150	! real zz(llm)
151	! real zfact
152
153	!flag forcings
154	logical :: nudge_wind=.true.
155	logical :: nudge_thermo=.false.
156	logical :: cptadvw=.true.
157	!=====================================================================
158	! DECLARATIONS FOR EACH CASE
159	!=====================================================================
160	!
161	#include "1D_decl_cases.h"
162	!
163	!---------------------------------------------------------------------
164	! Declarations related to nudging
165	!---------------------------------------------------------------------
166	integer :: nudge_max
167	parameter (nudge_max=9)
168	integer :: inudge_RHT=1
169	integer :: inudge_UV=2
170	logical :: nudge(nudge_max)
171	real :: t_targ(llm)
172	real :: rh_targ(llm)
173	real :: u_targ(llm)
174	real :: v_targ(llm)
175	!
176	!---------------------------------------------------------------------
177	! Declarations related to vertical discretization:
178	!---------------------------------------------------------------------
179	real :: pzero=1.e5
180	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
181	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
182
183	!---------------------------------------------------------------------
184	! Declarations related to variables
185	!---------------------------------------------------------------------
186
187	real :: phi(llm)
188	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
189	REAL rot(1, llm) ! relative vorticity, in s-1
190	real :: rlat_rad(1),rlon_rad(1)
191	real :: omega(llm+1),omega2(llm),rho(llm+1)
192	real :: ug(llm),vg(llm),fcoriolis
193	real :: sfdt, cfdt
194	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
195	real :: dt_dyn(llm)
196	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
197	real :: d_u_nudge(llm),d_v_nudge(llm)
198	real :: du_adv(llm),dv_adv(llm)
199	real :: du_age(llm),dv_age(llm)
200	real :: alpha
201	real :: ttt
202
203	REAL, ALLOCATABLE, DIMENSION(:,:):: q
204	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
205	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
206	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
207	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
208	! REAL, ALLOCATABLE, DIMENSION(:):: d_t_adv
209
210	!---------------------------------------------------------------------
211	! Initialization of surface variables
212	!---------------------------------------------------------------------
213	real :: run_off_lic_0(1)
214	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
215	real :: tsoil(1,nsoilmx,nbsrf)
216	! real :: agesno(1,nbsrf)
217
218	!---------------------------------------------------------------------
219	! Call to phyredem
220	!---------------------------------------------------------------------
221	logical :: ok_writedem =.true.
222	real :: sollw_in = 0.
223	real :: solsw_in = 0.
224
225	!---------------------------------------------------------------------
226	! Call to physiq
227	!---------------------------------------------------------------------
228	logical :: firstcall=.true.
229	logical :: lastcall=.false.
230	real :: phis(1) = 0.0
231	real :: dpsrf(1)
232
233	!---------------------------------------------------------------------
234	! Initializations of boundary conditions
235	!---------------------------------------------------------------------
236	integer, parameter :: yd = 360
237	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
238	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
239	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
240	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
241	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
242	real :: phy_ice (yd) = 0.0 ! Fraction de glace
243	real :: phy_fter(yd) = 0.0 ! Fraction de terre
244	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
245	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
246	real :: phy_flic(yd) = 0.0 ! Fraction de glace
247
248	!---------------------------------------------------------------------
249	! Fichiers et d'autres variables
250	!---------------------------------------------------------------------
251	integer :: k,l,i,it=1,mxcalc
252	integer :: nsrf
253	integer jcode
254	INTEGER read_climoz
255	!
256	integer :: it_end ! iteration number of the last call
257	!Al1
258	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
259	data ecrit_slab_oc/-1/
260	!
261	! if flag_inhib_forcing = 0, tendencies of forcing are added
262	! <> 0, tendencies of forcing are not added
263	INTEGER :: flag_inhib_forcing = 0
264
265	!=====================================================================
266	! INITIALIZATIONS
267	!=====================================================================
268	du_phys(:)=0.
269	dv_phys(:)=0.
270	dt_phys(:)=0.
271	dt_dyn(:)=0.
272	dt_cooling(:)=0.
273	d_t_adv(:)=0.
274	d_t_nudge(:)=0.
275	d_u_nudge(:)=0.
276	d_v_nudge(:)=0.
277	du_adv(:)=0.
278	dv_adv(:)=0.
279	du_age(:)=0.
280	dv_age(:)=0.
281
282	! Initialization of Common turb_forcing
283	dtime_frcg = 0.
284	Turb_fcg_gcssold=.false.
285	hthturb_gcssold = 0.
286	hqturb_gcssold = 0.
287
288	!---------------------------------------------------------------------
289	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
290	!---------------------------------------------------------------------
291	!Al1
292	call conf_unicol
293	!Al1 moves this gcssold var from common fcg_gcssold to
294	Turb_fcg_gcssold = xTurb_fcg_gcssold
295	! --------------------------------------------------------------------
296	close(1)
297	!Al1
298	write(,) 'lmdz1d.def lu => unicol.def'
299
300	! forcing_type defines the way the SCM is forced:
301	!forcing_type = 0 ==> forcing_les = .true.
302	! initial profiles from file prof.inp.001
303	! no forcing by LS convergence ;
304	! surface temperature imposed ;
305	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
306	!forcing_type = 1 ==> forcing_radconv = .true.
307	! idem forcing_type = 0, but the imposed radiative cooling
308	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
309	! then there is no radiative cooling at all)
310	!forcing_type = 2 ==> forcing_toga = .true.
311	! initial profiles from TOGA-COARE IFA files
312	! LS convergence and SST imposed from TOGA-COARE IFA files
313	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
314	! initial profiles from the GCM output
315	! LS convergence imposed from the GCM output
316	!forcing_type = 4 ==> forcing_twpice = .true.
317	! initial profiles from TWP-ICE cdf file
318	! LS convergence, omega and SST imposed from TWP-ICE files
319	!forcing_type = 5 ==> forcing_rico = .true.
320	! initial profiles from RICO files
321	! LS convergence imposed from RICO files
322	!forcing_type = 6 ==> forcing_amma = .true.
323	! initial profiles from AMMA nc file
324	! LS convergence, omega and surface fluxes imposed from AMMA file
325	!forcing_type = 7 ==> forcing_dice = .true.
326	! initial profiles and large scale forcings in dice_driver.nc
327	! Different stages: soil model alone, atm. model alone
328	! then both models coupled
329	!forcing_type = 8 ==> forcing_gabls4 = .true.
330	! initial profiles and large scale forcings in gabls4_driver.nc
331	!forcing_type >= 100 ==> forcing_case = .true.
332	! initial profiles and large scale forcings in cas.nc
333	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
334	! 101=cindynamo
335	! 102=bomex
336	!forcing_type >= 100 ==> forcing_case2 = .true.
337	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
338	! 103=arm_cu2 ie arm_cu with new forcing format
339	! 104=rico2 ie rico with new forcing format
340	!forcing_type = 40 ==> forcing_GCSSold = .true.
341	! initial profile from GCSS file
342	! LS convergence imposed from GCSS file
343	!forcing_type = 50 ==> forcing_fire = .true.
344	! forcing from fire.nc
345	!forcing_type = 59 ==> forcing_sandu = .true.
346	! initial profiles from sanduref file: see prof.inp.001
347	! SST varying with time and divergence constante: see ifa_sanduref.txt file
348	! Radiation has to be computed interactively
349	!forcing_type = 60 ==> forcing_astex = .true.
350	! initial profiles from file: see prof.inp.001
351	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
352	! Radiation has to be computed interactively
353	!forcing_type = 61 ==> forcing_armcu = .true.
354	! initial profiles from file: see prof.inp.001
355	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
356	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
357	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
358	! Radiation to be switched off
359	!
360	if (forcing_type .eq.0) THEN
361	forcing_les = .true.
362	elseif (forcing_type .eq.1) THEN
363	forcing_radconv = .true.
364	elseif (forcing_type .eq.2) THEN
365	forcing_toga = .true.
366	elseif (forcing_type .eq.3) THEN
367	forcing_GCM2SCM = .true.
368	elseif (forcing_type .eq.4) THEN
369	forcing_twpice = .true.
370	elseif (forcing_type .eq.5) THEN
371	forcing_rico = .true.
372	elseif (forcing_type .eq.6) THEN
373	forcing_amma = .true.
374	elseif (forcing_type .eq.7) THEN
375	forcing_dice = .true.
376	elseif (forcing_type .eq.8) THEN
377	forcing_gabls4 = .true.
378	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
379	forcing_case = .true.
380	year_ini_cas=2011
381	mth_ini_cas=10
382	day_deb=1
383	heure_ini_cas=0.
384	pdt_cas=3*3600. ! forcing frequency
385	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
386	forcing_case = .true.
387	year_ini_cas=1969
388	mth_ini_cas=6
389	day_deb=24
390	heure_ini_cas=0.
391	pdt_cas=1800. ! forcing frequency
392	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
393	forcing_case2 = .true.
394	year_ini_cas=1997
395	mth_ini_cas=6
396	day_deb=21
397	heure_ini_cas=11.5
398	pdt_cas=1800. ! forcing frequency
399	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
400	forcing_case2 = .true.
401	year_ini_cas=2004
402	mth_ini_cas=12
403	day_deb=16
404	heure_ini_cas=0.
405	pdt_cas=1800. ! forcing frequency
406	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
407	forcing_case2 = .true.
408	year_ini_cas=1969
409	mth_ini_cas=6
410	day_deb=24
411	heure_ini_cas=0.
412	pdt_cas=1800. ! forcing frequency
413	elseif (forcing_type .eq.40) THEN
414	forcing_GCSSold = .true.
415	elseif (forcing_type .eq.50) THEN
416	forcing_fire = .true.
417	elseif (forcing_type .eq.59) THEN
418	forcing_sandu = .true.
419	elseif (forcing_type .eq.60) THEN
420	forcing_astex = .true.
421	elseif (forcing_type .eq.61) THEN
422	forcing_armcu = .true.
423	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
424	else
425	write (,) 'ERROR : unknown forcing_type ', forcing_type
426	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
427	ENDIF
428	print*,"forcing type=",forcing_type
429
430	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
431	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
432	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
433	! through the common sst_forcing.
434
435	type_ts_forcing = 0
436	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
437	& type_ts_forcing = 1
438	!
439	! Initialization of the logical switch for nudging
440	jcode = iflag_nudge
441	do i = 1,nudge_max
442	nudge(i) = mod(jcode,10) .ge. 1
443	jcode = jcode/10
444	enddo
445	!---------------------------------------------------------------------
446	! Definition of the run
447	!---------------------------------------------------------------------
448
449	call conf_gcm( 99, .TRUE. )
450	!-----------------------------------------------------------------------
451	! Choix du calendrier
452	! -------------------
453
454	! calend = 'earth_365d'
455	if (calend == 'earth_360d') then
456	call ioconf_calendar('360d')
457	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
458	else if (calend == 'earth_365d') then
459	call ioconf_calendar('noleap')
460	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
461	else if (calend == 'earth_366d') then
462	call ioconf_calendar('all_leap')
463	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
464	else if (calend == 'gregorian') then
465	call ioconf_calendar('gregorian') ! not to be used by normal users
466	write(,)'CALENDRIER CHOISI: Gregorien'
467	else
468	write (,) 'ERROR : unknown calendar ', calend
469	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
470	endif
471	!-----------------------------------------------------------------------
472	!
473	!c Date :
474	! La date est supposee donnee sous la forme [annee, numero du jour dans
475	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
476	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
477	! Le numero du jour est dans "day". L heure est traitee separement.
478	! La date complete est dans "daytime" (l'unite est le jour).
479	if (nday>0) then
480	fnday=nday
481	else
482	fnday=-nday/float(day_step)
483	endif
484	print *,'fnday=',fnday
485	! start_time doit etre en FRACTION DE JOUR
486	start_time=time_ini/24.
487
488	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
489	IF(forcing_type .EQ. 61) fnday=53100./86400.
490	IF(forcing_type .EQ. 103) fnday=53100./86400.
491	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
492	IF(forcing_type .EQ. 6) fnday=64800./86400.
493	! IF(forcing_type .EQ. 6) fnday=50400./86400.
494	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
495	annee_ref = anneeref
496	mois = 1
497	day_ref = dayref
498	heure = 0.
499	itau_dyn = 0
500	itau_phy = 0
501	call ymds2ju(annee_ref,mois,day_ref,heure,day)
502	day_ini = int(day)
503	day_end = day_ini + fnday
504
505	IF (forcing_type .eq.2) THEN
506	! Convert the initial date of Toga-Coare to Julian day
507	call ymds2ju &
508	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
509
510	ELSEIF (forcing_type .eq.4) THEN
511	! Convert the initial date of TWPICE to Julian day
512	call ymds2ju &
513	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
514	& ,day_ju_ini_twpi)
515	ELSEIF (forcing_type .eq.6) THEN
516	! Convert the initial date of AMMA to Julian day
517	call ymds2ju &
518	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
519	& ,day_ju_ini_amma)
520	ELSEIF (forcing_type .eq.7) THEN
521	! Convert the initial date of DICE to Julian day
522	call ymds2ju &
523	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
524	& ,day_ju_ini_dice)
525	ELSEIF (forcing_type .eq.8 ) THEN
526	! Convert the initial date of GABLS4 to Julian day
527	call ymds2ju &
528	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
529	& ,day_ju_ini_gabls4)
530	ELSEIF (forcing_type .gt.100) THEN
531	! Convert the initial date to Julian day
532	day_ini_cas=day_deb
533	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
534	call ymds2ju &
535	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
536	& ,day_ju_ini_cas)
537	print*,'time case 2',day_ini_cas,day_ju_ini_cas
538	ELSEIF (forcing_type .eq.59) THEN
539	! Convert the initial date of Sandu case to Julian day
540	call ymds2ju &
541	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
542	& time_ini*3600.,day_ju_ini_sandu)
543
544	ELSEIF (forcing_type .eq.60) THEN
545	! Convert the initial date of Astex case to Julian day
546	call ymds2ju &
547	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
548	& time_ini*3600.,day_ju_ini_astex)
549
550	ELSEIF (forcing_type .eq.61) THEN
551	! Convert the initial date of Arm_cu case to Julian day
552	call ymds2ju &
553	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
554	& ,day_ju_ini_armcu)
555	ENDIF
556
557	IF (forcing_type .gt.100) THEN
558	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
559	ELSE
560	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
561	ENDIF
562	! Print out the actual date of the beginning of the simulation :
563	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
564	print *,' Time of beginning : ', &
565	& year_print, month_print, day_print, sec_print
566
567	!---------------------------------------------------------------------
568	! Initialization of dimensions, geometry and initial state
569	!---------------------------------------------------------------------
570	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
571	! but we still need to initialize dimphy module (klon,klev,etc.) here.
572	call init_dimphy(1,llm)
573	call suphel
574	call infotrac_init
575
576	if (nqtot>nqmx) STOP'Augmenter nqmx dans lmdz1d.F'
577	allocate(q(llm,nqtot)) ; q(:,:)=0.
578	allocate(dq(llm,nqtot))
579	allocate(dq_dyn(llm,nqtot))
580	allocate(d_q_adv(llm,nqtot))
581	allocate(d_q_nudge(llm,nqtot))
582	! allocate(d_t_adv(llm))
583
584	q(:,:) = 0.
585	dq(:,:) = 0.
586	dq_dyn(:,:) = 0.
587	d_q_adv(:,:) = 0.
588	d_q_nudge(:,:) = 0.
589
590	!
591	! No ozone climatology need be read in this pre-initialization
592	! (phys_state_var_init is called again in physiq)
593	read_climoz = 0
594	!
595	call phys_state_var_init(read_climoz)
596
597	if (ngrid.ne.klon) then
598	print*,'stop in inifis'
599	print*,'Probleme de dimensions :'
600	print*,'ngrid = ',ngrid
601	print*,'klon = ',klon
602	stop
603	endif
604	!!!=====================================================================
605	!!! Feedback forcing values for Gateaux differentiation (al1)
606	!!!=====================================================================
607	!!! Surface Planck forcing bracketing call radiation
608	!! surf_Planck = 0.
609	!! surf_Conv = 0.
610	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
611	!!! a mettre dans le lmdz1d.def ou autre
612	!!
613	!!
614	qsol = qsolinp
615	qsurf = fq_sat(tsurf,psurf/100.)
616	day1= day_ini
617	time=daytime-day
618	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
619	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
620
621	!
622	!! mpl et jyg le 22/08/2012 :
623	!! pour que les cas a flux de surface imposes marchent
624	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
625	fsens=-wtsurfrcpdrho(1)
626	flat=-wqsurfrlvttrho(1)
627	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
628	ENDIF
629	print*,'Flux sol ',fsens,flat
630	!! ok_flux_surf=.false.
631	!! fsens=-wtsurfrcpdrho(1)
632	!! flat=-wqsurfrlvttrho(1)
633	!!!!
634
635	! Vertical discretization and pressure levels at half and mid levels:
636
637	pa = 5e4
638	!! preff= 1.01325e5
639	preff = psurf
640	IF (ok_old_disvert) THEN
641	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
642	print *,'On utilise disvert0'
643	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
644	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
645	scaleheight=8.
646	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
647	ELSE
648	call disvert()
649	print *,'On utilise disvert'
650	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
651	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
652	ENDIF
653
654	sig_s=presnivs/preff
655	plev =ap+bp*psurf
656	play = 0.5*(plev(1:llm)+plev(2:llm+1))
657	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
658
659	IF (forcing_type .eq. 59) THEN
660	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
661	write(,) '***********************'
662	do l = 1, llm
663	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
664	if (trouve_700 .and. play(l).le.70000) then
665	llm700=l
666	print *,'llm700,play=',llm700,play(l)/100.
667	trouve_700= .false.
668	endif
669	enddo
670	write(,) '***********************'
671	ENDIF
672
673	!
674	!=====================================================================
675	! EVENTUALLY, READ FORCING DATA :
676	!=====================================================================
677
678	#include "1D_read_forc_cases.h"
679
680	if (forcing_GCM2SCM) then
681	write (,) 'forcing_GCM2SCM not yet implemented'
682	stop 'in initialization'
683	endif ! forcing_GCM2SCM
684
685	print*,'mxcalc=',mxcalc
686	! print*,'zlay=',zlay(mxcalc)
687	print*,'play=',play(mxcalc)
688
689	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
690	ts_cur = tsurf ! SST used in read_tsurf1d
691	!=====================================================================
692	! Initialisation de la physique :
693	!=====================================================================
694
695	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
696	!
697	! day_step, iphysiq lus dans gcm.def ci-dessus
698	! timestep: calcule ci-dessous from rday et day_step
699	! ngrid=1
700	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
701	! rday: defini dans suphel.F (86400.)
702	! day_ini: lu dans run.def (dayref)
703	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
704	! airefi,zcufi,zcvfi initialises au debut de ce programme
705	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
706	day_step = float(nsplit_phys)*day_step/float(iphysiq)
707	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
708	timestep =rday/day_step
709	dtime_frcg = timestep
710	!
711	zcufi=airefi
712	zcvfi=airefi
713	!
714	rlat_rad(1)=xlat*rpi/180.
715	rlon_rad(1)=xlon*rpi/180.
716
717	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
718	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
719	! with '0.' when necessary
720	call iniphysiq(iim,jjm,llm, &
721	1,comm_lmdz, &
722	rday,day_ini,timestep, &
723	(/rlat_rad(1),0./),(/0./), &
724	(/0.,0./),(/rlon_rad(1),0./), &
725	(/ (/airefi,0./),(/0.,0./) /), &
726	(/zcufi,0.,0.,0./), &
727	(/zcvfi,0./), &
728	ra,rg,rd,rcpd,1)
729	print*,'apres iniphysiq'
730
731	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
732	co2_ppm= 330.0
733	solaire=1370.0
734
735	! Ecriture du startphy avant le premier appel a la physique.
736	! On le met juste avant pour avoir acces a tous les champs
737
738	if (ok_writedem) then
739
740	!--------------------------------------------------------------------------
741	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
742	! need : qsol fder snow qsurf evap rugos agesno ftsoil
743	!--------------------------------------------------------------------------
744
745	type_ocean = "force"
746	run_off_lic_0(1) = restart_runoff
747	call fonte_neige_init(run_off_lic_0)
748
749	fder=0.
750	snsrf(1,:)=snowmass ! masse de neige des sous surface
751	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
752	fevap=0.
753	z0m(1,:)=rugos ! couverture de neige des sous surface
754	z0h(1,:)=rugosh ! couverture de neige des sous surface
755	agesno = xagesno
756	tsoil(:,:,:)=tsurf
757	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
758	! tsoil(1,1,1)=299.18
759	! tsoil(1,2,1)=300.08
760	! tsoil(1,3,1)=301.88
761	! tsoil(1,4,1)=305.48
762	! tsoil(1,5,1)=308.00
763	! tsoil(1,6,1)=308.00
764	! tsoil(1,7,1)=308.00
765	! tsoil(1,8,1)=308.00
766	! tsoil(1,9,1)=308.00
767	! tsoil(1,10,1)=308.00
768	! tsoil(1,11,1)=308.00
769	!-----------------------------------------------------------------------
770	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
771
772	!------------------ prepare limit conditions for limit.nc -----------------
773	!-- Ocean force
774
775	print*,'avant phyredem'
776	pctsrf(1,:)=0.
777	if (nat_surf.eq.0.) then
778	pctsrf(1,is_oce)=1.
779	pctsrf(1,is_ter)=0.
780	pctsrf(1,is_lic)=0.
781	pctsrf(1,is_sic)=0.
782	else if (nat_surf .eq. 1) then
783	pctsrf(1,is_oce)=0.
784	pctsrf(1,is_ter)=1.
785	pctsrf(1,is_lic)=0.
786	pctsrf(1,is_sic)=0.
787	else if (nat_surf .eq. 2) then
788	pctsrf(1,is_oce)=0.
789	pctsrf(1,is_ter)=0.
790	pctsrf(1,is_lic)=1.
791	pctsrf(1,is_sic)=0.
792	else if (nat_surf .eq. 3) then
793	pctsrf(1,is_oce)=0.
794	pctsrf(1,is_ter)=0.
795	pctsrf(1,is_lic)=0.
796	pctsrf(1,is_sic)=1.
797
798	end if
799
800
801	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
802	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
803
804	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
805	zpic = zpicinp
806	ftsol=tsurf
807	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
808	! 6 albedo, mais on peut quand meme tourner avec
809	! moins. Seules les 2 ou 4 premiers seront lus
810	falb_dir=albedo
811	falb_dif=albedo
812	rugoro=rugos
813	t_ancien(1,:)=temp(:)
814	q_ancien(1,:)=q(:,1)
815	!jyg<
816	!! pbl_tke(:,:,:)=1.e-8
817	pbl_tke(:,:,:)=0.
818	pbl_tke(:,2,:)=1.e-2
819	PRINT *, ' pbl_tke dans lmdz1d '
820	if (prt_level .ge. 5) then
821	DO nsrf = 1,4
822	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
823	ENDDO
824	end if
825
826	!>jyg
827
828	rain_fall=0.
829	snow_fall=0.
830	solsw=0.
831	sollw=0.
832	sollwdown=rsigmatsurf*4
833	radsol=0.
834	rnebcon=0.
835	ratqs=0.
836	clwcon=0.
837	zmax0 = 0.
838	zmea=0.
839	zstd=0.
840	zsig=0.
841	zgam=0.
842	zval=0.
843	zthe=0.
844	sig1=0.
845	w01=0.
846	wake_cstar = 0.
847	wake_deltaq = 0.
848	wake_deltat = 0.
849	wake_delta_pbl_TKE(:,:,:) = 0.
850	delta_tsurf = 0.
851	wake_fip = 0.
852	wake_pe = 0.
853	wake_s = 0.
854	wake_dens = 0.
855	ale_bl = 0.
856	ale_bl_trig = 0.
857	alp_bl = 0.
858	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
859	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
860	entr_therm = 0.
861	detr_therm = 0.
862	f0 = 0.
863	fm_therm = 0.
864	u_ancien(1,:)=u(:)
865	v_ancien(1,:)=v(:)
866
867	!------------------------------------------------------------------------
868	! Make file containing restart for the physics (startphy.nc)
869	!
870	! NB: List of the variables to be written by phyredem (via put_field):
871	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
872	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
873	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
874	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
875	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
876	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
877	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
878	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
879	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
880	!
881	! NB2: The content of the startphy.nc file depends on some flags defined in
882	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
883	! to be set at some arbitratry convenient values.
884	!------------------------------------------------------------------------
885	!Al1 =============== restart option ==========================
886	if (.not.restart) then
887	iflag_pbl = 5
888	call phyredem ("startphy.nc")
889	else
890	! (desallocations)
891	print*,'callin surf final'
892	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
893	print*,'after surf final'
894	CALL fonte_neige_final(run_off_lic_0)
895	endif
896
897	ok_writedem=.false.
898	print*,'apres phyredem'
899
900	endif ! ok_writedem
901
902	!------------------------------------------------------------------------
903	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
904	! --------------------------------------------------
905	! NB: List of the variables to be written in limit.nc
906	! (by writelim.F, subroutine of 1DUTILS.h):
907	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
908	! phy_fter,phy_foce,phy_flic,phy_fsic)
909	!------------------------------------------------------------------------
910	do i=1,yd
911	phy_nat(i) = nat_surf
912	phy_alb(i) = albedo
913	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
914	phy_rug(i) = rugos
915	phy_fter(i) = pctsrf(1,is_ter)
916	phy_foce(i) = pctsrf(1,is_oce)
917	phy_fsic(i) = pctsrf(1,is_sic)
918	phy_flic(i) = pctsrf(1,is_lic)
919	enddo
920
921	! fabrication de limit.nc
922	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
923	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
924
925
926	call phys_state_var_end
927	!Al1
928	if (restart) then
929	print*,'call to restart dyn 1d'
930	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
931	& u,v,temp,q,omega2)
932
933	print*,'fnday,annee_ref,day_ref,day_ini', &
934	& fnday,annee_ref,day_ref,day_ini
935	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
936	day = day_ini
937	day_end = day_ini + nday
938	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
939
940	! Print out the actual date of the beginning of the simulation :
941	call ju2ymds(daytime, an, mois, jour, heure)
942	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
943
944	day = int(daytime)
945	time=daytime-day
946
947	print,'*** intialised fields from restart1dyn *****'
948	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
949	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
950	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
951	! raz for safety
952	do l=1,llm
953	dq_dyn(l,1) = 0.
954	enddo
955	endif
956	!Al1 ================ end restart =================================
957	IF (ecrit_slab_oc.eq.1) then
958	open(97,file='div_slab.dat',STATUS='UNKNOWN')
959	elseif (ecrit_slab_oc.eq.0) then
960	open(97,file='div_slab.dat',STATUS='OLD')
961	endif
962	!
963	!---------------------------------------------------------------------
964	! Initialize target profile for RHT nudging if needed
965	!---------------------------------------------------------------------
966	if (nudge(inudge_RHT)) then
967	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
968	endif
969	if (nudge(inudge_UV)) then
970	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
971	endif
972	!
973	!=====================================================================
974	! START OF THE TEMPORAL LOOP :
975	!=====================================================================
976
977	it_end = nint(fnday*day_step)
978	!test JLD it_end = 10
979	do while(it.le.it_end)
980
981	if (prt_level.ge.1) then
982	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
983	& it,day,time,it_end,day_step
984	print*,'PAS DE TEMPS ',timestep
985	endif
986	!Al1 demande de restartphy.nc
987	if (it.eq.it_end) lastcall=.True.
988
989	!---------------------------------------------------------------------
990	! Interpolation of forcings in time and onto model levels
991	!---------------------------------------------------------------------
992
993	#include "1D_interp_cases.h"
994
995	if (forcing_GCM2SCM) then
996	write (,) 'forcing_GCM2SCM not yet implemented'
997	stop 'in time loop'
998	endif ! forcing_GCM2SCM
999
1000	!---------------------------------------------------------------------
1001	! Geopotential :
1002	!---------------------------------------------------------------------
1003
1004	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1005	do l = 1, llm-1
1006	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1007	& (play(l)-play(l+1))/(play(l)+play(l+1))
1008	enddo
1009
1010	!---------------------------------------------------------------------
1011	! Listing output for debug prt_level>=1
1012	!---------------------------------------------------------------------
1013	if (prt_level>=1) then
1014	print *,' avant physiq : -------- day time ',day,time
1015	write(,) 'firstcall,lastcall,phis', &
1016	& firstcall,lastcall,phis
1017	end if
1018	if (prt_level>=5) then
1019	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1020	& 'presniv','plev','play','phi'
1021	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1022	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1023	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1024	& 'presniv','u','v','temp','q1','q2','omega2'
1025	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1026	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1027	endif
1028
1029	!---------------------------------------------------------------------
1030	! Call physiq :
1031	!---------------------------------------------------------------------
1032	call physiq(ngrid,llm, &
1033	firstcall,lastcall,timestep, &
1034	plev,play,phi,phis,presnivs, &
1035	u,v, rot, temp,q,omega2, &
1036	du_phys,dv_phys,dt_phys,dq,dpsrf)
1037	firstcall=.false.
1038
1039	!---------------------------------------------------------------------
1040	! Listing output for debug
1041	!---------------------------------------------------------------------
1042	if (prt_level>=5) then
1043	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1044	& 'presniv','plev','play','phi'
1045	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1046	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1047	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1048	& 'presniv','u','v','temp','q1','q2','omega2'
1049	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1050	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1051	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1052	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1053	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1054	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1055	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1056	write(,) 'dpsrf',dpsrf
1057	endif
1058	!---------------------------------------------------------------------
1059	! Add physical tendencies :
1060	!---------------------------------------------------------------------
1061
1062	fcoriolis=2.sin(rpixlat/180.)*romega
1063	if (forcing_radconv .or. forcing_fire) then
1064	fcoriolis=0.0
1065	dt_cooling=0.0
1066	d_t_adv=0.0
1067	d_q_adv=0.0
1068	endif
1069	! print*, 'calcul de fcoriolis ', fcoriolis
1070
1071	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1072	& .or.forcing_amma .or. forcing_type.eq.101) then
1073	fcoriolis=0.0 ; ug=0. ; vg=0.
1074	endif
1075
1076	if(forcing_rico) then
1077	dt_cooling=0.
1078	endif
1079
1080	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1081	fcoriolis, xlat,mxcalc
1082
1083	du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1084	dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1085	! print *,'u-ug=',u-ug
1086
1087	!!!!!!!!!!!!!!!!!!!!!!!!
1088	! Geostrophic wind
1089	!!!!!!!!!!!!!!!!!!!!!!!!
1090	sfdt = sin(0.5fcoriolistimestep)
1091	cfdt = cos(0.5fcoriolistimestep)
1092	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1093	!
1094	du_age(1:mxcalc)= -2.sfdt/timestep &
1095	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1096	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1097	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1098	!
1099	dv_age(1:mxcalc)= -2.sfdt/timestep &
1100	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1101	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1102	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1103	!
1104	!!!!!!!!!!!!!!!!!!!!!!!!
1105	! Nudging
1106	!!!!!!!!!!!!!!!!!!!!!!!!
1107	d_t_nudge(:) = 0.
1108	d_q_nudge(:,:) = 0.
1109	d_u_nudge(:) = 0.
1110	d_v_nudge(:) = 0.
1111	if (nudge(inudge_RHT)) then
1112	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1113	& d_t_nudge,d_q_nudge(:,1))
1114	endif
1115	if (nudge(inudge_UV)) then
1116	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1117	& d_u_nudge,d_v_nudge)
1118	endif
1119	!
1120	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1121	! call writefield_phy('dv_age' ,dv_age,llm)
1122	! call writefield_phy('du_age' ,du_age,llm)
1123	! call writefield_phy('du_phys' ,du_phys,llm)
1124	! call writefield_phy('u_tend' ,u,llm)
1125	! call writefield_phy('u_g' ,ug,llm)
1126	!
1127	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1128	!! Increment state variables
1129	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1130	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1131
1132	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1133	! au dessus de 700hpa, on relaxe vers les profils initiaux
1134	if (forcing_sandu .OR. forcing_astex) then
1135	#include "1D_nudge_sandu_astex.h"
1136	else
1137	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1138	& du_phys(1:mxcalc) &
1139	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1140	& +d_u_nudge(1:mxcalc) )
1141	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1142	& dv_phys(1:mxcalc) &
1143	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1144	& +d_v_nudge(1:mxcalc) )
1145	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1146	& dq(1:mxcalc,:) &
1147	& +d_q_adv(1:mxcalc,:) &
1148	& +d_q_nudge(1:mxcalc,:) )
1149
1150	if (prt_level.ge.3) then
1151	print *, &
1152	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1153	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1154	print* ,'dv_phys=',dv_phys
1155	print* ,'dv_age=',dv_age
1156	print* ,'dv_adv=',dv_adv
1157	print* ,'d_v_nudge=',d_v_nudge
1158	print*, v
1159	print*, vg
1160	endif
1161
1162	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1163	& dt_phys(1:mxcalc) &
1164	& +d_t_adv(1:mxcalc) &
1165	& +d_t_nudge(1:mxcalc) &
1166	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1167
1168	endif ! forcing_sandu or forcing_astex
1169
1170	teta=temp(pzero/play)*rkappa
1171	!
1172	!---------------------------------------------------------------------
1173	! Nudge soil temperature if requested
1174	!---------------------------------------------------------------------
1175
1176	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1177	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1178	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1179	ENDIF
1180
1181	!---------------------------------------------------------------------
1182	! Add large-scale tendencies (advection, etc) :
1183	!---------------------------------------------------------------------
1184
1185	!cc nrlmd
1186	!cc tmpvar=teta
1187	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1188	!cc
1189	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1190	!cc tmpvar(:)=q(:,1)
1191	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1192	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1193	!cc tmpvar(:)=q(:,2)
1194	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1195	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1196
1197	END IF ! end if tendency of tendency should be added
1198
1199	!---------------------------------------------------------------------
1200	! Air temperature :
1201	!---------------------------------------------------------------------
1202	if (lastcall) then
1203	print*,'Pas de temps final ',it
1204	call ju2ymds(daytime, an, mois, jour, heure)
1205	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1206	endif
1207
1208	! incremente day time
1209	! print*,'daytime bef',daytime,1./day_step
1210	daytime = daytime+1./day_step
1211	!Al1dbg
1212	day = int(daytime+0.1/day_step)
1213	! time = max(daytime-day,0.0)
1214	!Al1&jyg: correction de bug
1215	!cc time = real(mod(it,day_step))/day_step
1216	time = time_ini/24.+real(mod(it,day_step))/day_step
1217	! print*,'daytime nxt time',daytime,time
1218	it=it+1
1219
1220	enddo
1221
1222	!Al1
1223	if (ecrit_slab_oc.ne.-1) close(97)
1224
1225	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1226	! -------------------------------------
1227	call dyn1dredem("restart1dyn.nc", &
1228	& plev,play,phi,phis,presnivs, &
1229	& u,v,temp,q,omega2)
1230
1231	CALL abort_gcm ('lmdz1d ','The End ',0)
1232
1233	end
1234
1235	#include "1DUTILS.h"
1236	#include "1Dconv.h"
1237
1238	!#endif
1239
1240

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format