subroutine writediagfi(ngrid,nom,titre,unite,dim,px) ! Ecriture de variables diagnostiques au choix dans la physique ! dans un fichier NetCDF nomme 'diagfi'. Ces variables peuvent etre ! 3d (ex : temperature), 2d (ex : temperature de surface), ou ! 0d (pour un scalaire qui ne depend que du temps : ex : la longitude ! solaire) ! (ou encore 1d, dans le cas de testphys1d, pour sortir une colonne) ! La periode d'ecriture est donnee par ! "ecritphy " regle dans le fichier de controle de run : run.def ! ! writediagfi peut etre appele de n'importe quelle subroutine ! de la physique, plusieurs fois. L'initialisation et la creation du ! fichier se fait au tout premier appel. ! ! WARNING : les variables dynamique (u,v,t,q,ps) ! sauvees par writediagfi avec une ! date donnee sont legerement differentes que dans le fichier histoire car ! on ne leur a pas encore ajoute de la dissipation et de la physique !!! ! IL est RECOMMANDE d'ajouter les tendance physique a ces variables ! avant l'ecriture dans diagfi (cf. physiq.F) ! ! Modifs: Aug.2010 Ehouarn: enforce outputs to be real*4 ! Oct 2011 Francois: enable having a 'diagfi.def' file to select ! at runtime, which variables to put in file ! ! parametres (input) : ! ---------- ! ngrid : nombres de point ou est calcule la physique ! (ngrid = 2+(jjm-1)*iim - 1/jjm) ! (= nlon ou klon dans la physique terrestre) ! ! unit : unite logique du fichier de sortie (toujours la meme) ! nom : nom de la variable a sortir (chaine de caracteres) ! titre: titre de la variable (chaine de caracteres) ! unite : unite de la variable (chaine de caracteres) ! px : variable a sortir (real 0, 1, 2, ou 3d) ! dim : dimension de px : 0, 1, 2, ou 3 dimensions ! !================================================================= USE surfdat_h implicit none ! Commons #include "dimensions.h" #include "dimphys.h" #include "paramet.h" #include "control.h" #include "comvert.h" #include "comgeom.h" #include "description.h" #include "netcdf.inc" #include "temps.h" ! Arguments on input: integer,intent(in) :: ngrid character (len=*),intent(in) :: nom,titre,unite integer,intent(in) :: dim real,intent(in) :: px(ngrid,llm) ! Local variables: real*4 dx3(iip1,jjp1,llm) ! to store a 3D data set real*4 dx2(iip1,jjp1) ! to store a 2D (surface) data set real*4 dx1(llm) ! to store a 1D (column) data set real*4 dx0 real*4,save :: date REAL phis(ip1jmp1) integer irythme integer ierr,ierr2 integer iq integer i,j,l,zmax , ig0 integer,save :: zitau=0 character(len=20),save :: firstnom='1234567890' ! Ajouts integer, save :: ntime=0 integer :: idim,varid integer :: nid character(len=*),parameter :: fichnom="diagfi.nc" integer, dimension(4) :: id integer, dimension(4) :: edges,corner ! Added to use diagfi.def to select output variable logical,save :: diagfi_def logical :: getout integer,save :: n_nom_def integer :: n integer,parameter :: n_nom_def_max=99 character(len=20),save :: nom_def(n_nom_def_max) logical,save :: firstcall=.true. integer dimvert !*************************************************************** !Sortie des variables au rythme voulu irythme = int(ecritphy) ! sortie au rythme de ecritphy ! irythme = iconser ! sortie au rythme des variables de controle ! irythme = iphysiq ! sortie a tous les pas physique ! irythme = iecri*day_step ! sortie au rythme des fichiers histoires ! irythme = periodav*day_step ! sortie au rythme des fichiers histmoy !*************************************************************** ! At very first call, check if there is a "diagfi.def" to use and read it ! ----------------------------------------------------------------------- IF (firstcall) THEN firstcall=.false. ! Open diagfi.def definition file if there is one: open(99,file="diagfi.def",status='old',form='formatted', s iostat=ierr2) if(ierr2.eq.0) then diagfi_def=.true. write(*,*) "******************" write(*,*) "Reading diagfi.def" write(*,*) "******************" do n=1,n_nom_def_max read(99,fmt='(a)',end=88) nom_def(n) write(*,*) 'Output in diagfi: ', trim(nom_def(n)) end do 88 continue if (n.ge.n_nom_def_max) then write(*,*)"n_nom_def_max too small in writediagfi.F:",n stop end if n_nom_def=n-1 close(99) else diagfi_def=.false. endif END IF ! of IF (firstcall) ! Get out of write_diagfi if there is diagfi.def AND variable not listed ! --------------------------------------------------------------------- if (diagfi_def) then getout=.true. do n=1,n_nom_def if(trim(nom_def(n)).eq.nom) getout=.false. end do if (getout) return end if ! Initialisation of 'firstnom' and create/open the "diagfi.nc" NetCDF file ! ------------------------------------------------------------------------ ! (at very first call to the subroutine, in accordance with diagfi.def) if (firstnom.eq.'1234567890') then ! .true. for the very first valid ! call to this subroutine; now set 'firstnom' firstnom = nom ! just to be sure, check that firstnom is large enough to hold nom if (len_trim(firstnom).lt.len_trim(nom)) then write(*,*) "writediagfi: Error !!!" write(*,*) " firstnom string not long enough!!" write(*,*) " increase its size to at least ",len_trim(nom) stop endif zitau = -1 ! initialize zitau #ifdef CPP_PARA !! parallel: we cannot use the usual writediagfi method call iophys_ini #else ! Create the NetCDF file ierr = NF_CREATE(fichnom, NF_CLOBBER, nid) ! Define the 'Time' dimension ierr = nf_def_dim(nid,"Time",NF_UNLIMITED,idim) ! Define the 'Time' variable !#ifdef NC_DOUBLE ! ierr = NF_DEF_VAR (nid, "Time", NF_DOUBLE, 1, idim,varid) !#else ierr = NF_DEF_VAR (nid, "Time", NF_FLOAT, 1, idim,varid) !#endif ! Add a long_name attribute ierr = NF_PUT_ATT_TEXT (nid, varid, "long_name", . 4,"Time") ! Add a units attribute ierr = NF_PUT_ATT_TEXT(nid, varid,'units',29, . "days since 0000-00-0 00:00:00") ! Switch out of NetCDF Define mode ierr = NF_ENDDEF(nid) ! write "header" of file (longitudes, latitudes, geopotential, ...) call gr_fi_dyn(1,ngrid,iip1,jjp1,phisfi,phis) call iniwrite(nid,day_ini,phis) else ! Open the NetCDF file ierr = NF_OPEN(fichnom,NF_WRITE,nid) #endif endif ! if (firstnom.eq.'1234567890') if (ngrid.eq.1) then ! in testphys1d, for the 1d version of the GCM, iphysiq and irythme ! are undefined; so set them to 1 iphysiq=1 !JL11 irythme=1 ! NB: endif ! Increment time index 'zitau' if it is the "fist call" (at given time level) ! to writediagfi !------------------------------------------------------------------------ if (nom.eq.firstnom) then zitau = zitau + iphysiq end if !-------------------------------------------------------- ! Write the variables to output file if it's time to do so !-------------------------------------------------------- if ( MOD(zitau+1,irythme) .eq.0.) then #ifdef CPP_PARA !! parallel: we cannot use the usual writediagfi method if (dim .eq. 2) then dimvert = 1 else if (dim == 3) then dimvert = llm endif call iophys_ecrit(nom,dimvert,titre,unite,px) #else ! Compute/write/extend 'Time' coordinate (date given in days) ! (done every "first call" (at given time level) to writediagfi) ! Note: date is incremented as 1 step ahead of physics time !-------------------------------------------------------- if (nom.eq.firstnom) then ! We have identified a "first call" (at given date) ntime=ntime+1 ! increment # of stored time steps ! compute corresponding date (in days and fractions thereof) date= float (zitau +1)/float (day_step) ! Get NetCDF ID of 'Time' variable ierr= NF_INQ_VARID(nid,"Time",varid) ! Write (append) the new date to the 'Time' array !#ifdef NC_DOUBLE ! ierr= NF_PUT_VARA_DOUBLE(nid,varid,ntime,1,date) !#else ierr= NF_PUT_VARA_REAL(nid,varid,ntime,1,date) !#endif if (ierr.ne.NF_NOERR) then write(*,*) "***** PUT_VAR matter in writediagfi_nc" write(*,*) "***** with time" write(*,*) 'ierr=', ierr c call abort endif write(6,*)'WRITEDIAGFI: date= ', date end if ! of if (nom.eq.firstnom) !Case of a 3D variable !--------------------- if (dim.eq.3) then ! Passage variable physique --> variable dynamique ! recast (copy) variable from physics grid to dynamics grid DO l=1,llm DO i=1,iip1 dx3(i,1,l)=px(1,l) dx3(i,jjp1,l)=px(ngrid,l) ENDDO DO j=2,jjm ig0= 1+(j-2)*iim DO i=1,iim dx3(i,j,l)=px(ig0+i,l) ENDDO dx3(iip1,j,l)=dx3(1,j,l) ENDDO ENDDO ! Ecriture du champs ! write (*,*) 'In writediagfi, on sauve: ' , nom ! write (*,*) 'In writediagfi. Estimated date = ' ,date ! name of the variable ierr= NF_INQ_VARID(nid,nom,varid) if (ierr /= NF_NOERR) then ! corresponding dimensions ierr= NF_INQ_DIMID(nid,"longitude",id(1)) ierr= NF_INQ_DIMID(nid,"latitude",id(2)) ierr= NF_INQ_DIMID(nid,"altitude",id(3)) ierr= NF_INQ_DIMID(nid,"Time",id(4)) ! Create the variable if it doesn't exist yet write (*,*) "==========================" write (*,*) "DIAGFI: creating variable ",nom call def_var(nid,nom,titre,unite,4,id,varid,ierr) endif corner(1)=1 corner(2)=1 corner(3)=1 corner(4)=ntime edges(1)=iip1 edges(2)=jjp1 edges(3)=llm edges(4)=1 !#ifdef NC_DOUBLE ! ierr= NF_PUT_VARA_DOUBLE(nid,varid,corner,edges,dx3) !#else ierr= NF_PUT_VARA_REAL(nid,varid,corner,edges,dx3) !#endif if (ierr.ne.NF_NOERR) then write(*,*) "***** PUT_VAR problem in writediagfi" write(*,*) "***** with ",nom write(*,*) 'ierr=', ierr c call abort endif !Case of a 2D variable !--------------------- else if (dim.eq.2) then ! Passage variable physique --> physique dynamique ! recast (copy) variable from physics grid to dynamics grid DO i=1,iip1 dx2(i,1)=px(1,1) dx2(i,jjp1)=px(ngrid,1) ENDDO DO j=2,jjm ig0= 1+(j-2)*iim DO i=1,iim dx2(i,j)=px(ig0+i,1) ENDDO dx2(iip1,j)=dx2(1,j) ENDDO ! write (*,*) 'In writediagfi, on sauve: ' , nom ! write (*,*) 'In writediagfi. Estimated date = ' ,date ierr= NF_INQ_VARID(nid,nom,varid) if (ierr /= NF_NOERR) then ! corresponding dimensions ierr= NF_INQ_DIMID(nid,"longitude",id(1)) ierr= NF_INQ_DIMID(nid,"latitude",id(2)) ierr= NF_INQ_DIMID(nid,"Time",id(3)) ! Create the variable if it doesn't exist yet write (*,*) "==========================" write (*,*) "DIAGFI: creating variable ",nom call def_var(nid,nom,titre,unite,3,id,varid,ierr) endif corner(1)=1 corner(2)=1 corner(3)=ntime edges(1)=iip1 edges(2)=jjp1 edges(3)=1 !#ifdef NC_DOUBLE ! ierr = NF_PUT_VARA_DOUBLE (nid,varid,corner,edges,dx2) !#else ierr= NF_PUT_VARA_REAL(nid,varid,corner,edges,dx2) !#endif if (ierr.ne.NF_NOERR) then write(*,*) "***** PUT_VAR matter in writediagfi" write(*,*) "***** with ",nom write(*,*) 'ierr=', ierr c call abort endif !Case of a 1D variable (ie: a column) !--------------------------------------------------- else if (dim.eq.1) then ! Passage variable physique --> physique dynamique ! recast (copy) variable from physics grid to dynamics grid do l=1,llm dx1(l)=px(1,l) enddo ierr= NF_INQ_VARID(nid,nom,varid) if (ierr /= NF_NOERR) then ! corresponding dimensions ierr= NF_INQ_DIMID(nid,"altitude",id(1)) ierr= NF_INQ_DIMID(nid,"Time",id(2)) ! Create the variable if it doesn't exist yet write (*,*) "==========================" write (*,*) "DIAGFI: creating variable ",nom call def_var(nid,nom,titre,unite,2,id,varid,ierr) endif corner(1)=1 corner(2)=ntime edges(1)=llm edges(2)=1 !#ifdef NC_DOUBLE ! ierr= NF_PUT_VARA_DOUBLE(nid,varid,corner,edges,dx1) !#else ierr= NF_PUT_VARA_REAL(nid,varid,corner,edges,dx1) !#endif if (ierr.ne.NF_NOERR) then write(*,*) "***** PUT_VAR problem in writediagfi" write(*,*) "***** with ",nom write(*,*) 'ierr=', ierr c call abort endif !Case of a 0D variable (ie: a time-dependent scalar) !--------------------------------------------------- else if (dim.eq.0) then dx0 = px (1,1) ierr= NF_INQ_VARID(nid,nom,varid) if (ierr /= NF_NOERR) then ! corresponding dimensions ierr= NF_INQ_DIMID(nid,"Time",id(1)) ! Create the variable if it doesn't exist yet write (*,*) "==========================" write (*,*) "DIAGFI: creating variable ",nom call def_var(nid,nom,titre,unite,1,id,varid,ierr) endif corner(1)=ntime edges(1)=1 !#ifdef NC_DOUBLE ! ierr = NF_PUT_VARA_DOUBLE (nid,varid,corner,edges,dx0) !#else ierr= NF_PUT_VARA_REAL(nid,varid,corner,edges,dx0) !#endif if (ierr.ne.NF_NOERR) then write(*,*) "***** PUT_VAR matter in writediagfi" write(*,*) "***** with ",nom write(*,*) 'ierr=', ierr c call abort endif endif ! of if (dim.eq.3) elseif(dim.eq.2)... #endif endif ! of if ( MOD(zitau+1,irythme) .eq.0.) #ifndef CPP_PARA ierr= NF_CLOSE(nid) #endif end