subroutine sugas_corrk

!==================================================================
!
!     Purpose
!     -------
!     Set up gaseous absorption parameters used by the radiation code.
!     This subroutine is a replacement for the old 'setrad', which contained
!     both absorption and scattering data.
!
!     Authors
!     -------
!     Adapted and generalised from the NASA Ames code by Robin Wordsworth (2009)
!     Added double gray case by Jeremy Leconte (2012)
!     New HITRAN continuum data section by RW (2012)
!
!     Summary
!     -------
!
!==================================================================

      use radinc_h
      use radcommon_h, only : pgasref,pfgasref,pgasmin,pgasmax
      use radcommon_h, only : tgasref,tgasmin,tgasmax
      use radcommon_h, only : gasv,gasi,FZEROI,FZEROV,gweight
      use radcommon_h, only : wrefvar,WNOI,WNOV
      use datafile_mod, only: datadir

      use gases_h
      use ioipsl_getincom 
      implicit none

#include "callkeys.h"
#include "comcstfi.h"

!==================================================================

      logical file_ok

      integer n, nt, np, nh, ng, nw, m, i
      integer L_NGAUSScheck

      character(len=200) :: file_id
      character(len=500) :: file_path

      ! ALLOCATABLE ARRAYS -- AS 12/2011
      REAL*8, DIMENSION(:,:,:,:,:), ALLOCATABLE :: gasi8, gasv8
      character*3,allocatable,DIMENSION(:) :: gastype ! for check with gnom

      real*8 x, xi(4), yi(4), ans, p
!     For gray case (JL12)
      real kappa_IR, kappa_VI, IR_VI_wnlimit, nVI_limit,nIR_limit

      integer ngas, igas, jgas

      double precision testcont ! for continuum absorption initialisation

!=======================================================================
!     Load variable species data, exit if we have wrong database
      file_id='/corrk_data/' // TRIM(corrkdir) // '/Q.dat'
      file_path=TRIM(datadir)//TRIM(file_id)

      ! check that the file exists
      inquire(FILE=file_path,EXIST=file_ok)
      if(.not.file_ok) then
         write(*,*)'The file ',TRIM(file_path)
         write(*,*)'was not found by sugas_corrk.F90, exiting.'
         write(*,*)'Check that your path to datagcm:',trim(datadir)
         write(*,*)' is correct. You can change it in callphys.def with:'
         write(*,*)' datadir = /absolute/path/to/datagcm'
         write(*,*)'Also check that the corrkdir you chose in callphys.def exists.'
         call abort
      endif

      ! check that database matches varactive toggle
      open(111,file=TRIM(file_path),form='formatted')
      read(111,*) ngas

      if(ngas.ne.ngasmx)then
         print*,'Number of gases in radiative transfer data (',ngas,') does not', &
                'match that in gases.def (',ngasmx,'), exiting.'
         call abort
      endif 

      if(ngas.eq.1 .and. (varactive.or.varfixed))then
         print*,'You have varactive/fixed=.true. but the database [',  &
                     corrkdir(1:LEN_TRIM(corrkdir)),           &
                '] has no variable species, exiting.'
         call abort
      elseif(ngas.gt.5 .or. ngas.lt.1)then
         print*,ngas,' species in database [',               &
                     corrkdir(1:LEN_TRIM(corrkdir)),           &
                '], radiative code cannot handle this.'
         call abort
      endif 

      ! dynamically allocate gastype and read from Q.dat
      IF ( .NOT. ALLOCATED( gastype ) ) ALLOCATE( gastype( ngas ) )

      do igas=1,ngas
         read(111,*) gastype(igas)
         print*,'Gas ',igas,' is ',gastype(igas)
      enddo

      ! get array size, load the coefficients
      open(111,file=TRIM(file_path),form='formatted')
      read(111,*) L_REFVAR
      IF( .NOT. ALLOCATED( wrefvar ) ) ALLOCATE( WREFVAR(L_REFVAR) )
      read(111,*) wrefvar
      close(111)

      if(L_REFVAR.gt.1 .and. (.not.varactive) .and. (.not.varfixed))then
         print*,'You have varactive and varfixed=.false. and the database [', &
                     corrkdir(1:LEN_TRIM(corrkdir)),           &
                '] has a variable species.'
         call abort
      endif

      ! Check that gastype and gnom match
      do igas=1,ngas
         print*,'Gas ',igas,' is ',gnom(igas)
         if(gnom(igas).ne.gastype(igas))then
            print*,'Name of a gas in radiative transfer data (',gastype(igas),') does not ', &
                 'match that in gases.def (',gnom(igas),'), exiting. You should compare ', &
                 'gases.def with Q.dat in your radiative transfer directory.' 
            call abort
         endif
      enddo
      print*,'Confirmed gas match in radiative transfer and gases.def!'

      ! display the values
      print*,'Variable gas volume mixing ratios:'
      do n=1,L_REFVAR
         !print*,n,'.',wrefvar(n),' kg/kg' ! pay attention!
         print*,n,'.',wrefvar(n),' mol/mol'
      end do
      print*,''

!=======================================================================
!     Set the weighting in g-space

      file_id='/corrk_data/' // TRIM(corrkdir) // '/g.dat'
      file_path=TRIM(datadir)//TRIM(file_id)

      ! check that the file exists
      inquire(FILE=file_path,EXIST=file_ok)
      if(.not.file_ok) then
         write(*,*)'The file ',TRIM(file_path)
         write(*,*)'was not found by sugas_corrk.F90, exiting.'
         write(*,*)'Check that your path to datagcm:',trim(datadir)
         write(*,*)' is correct. You can change it in callphys.def with:'
         write(*,*)' datadir = /absolute/path/to/datagcm'
         write(*,*)'Also check that the corrkdir you chose in callphys.def exists.'
         call abort
      endif
      
      ! check the array size is correct, load the coefficients
      open(111,file=TRIM(file_path),form='formatted')
      read(111,*) L_NGAUSScheck
      if(.not.(L_NGAUSScheck.eq.L_NGAUSS)) then
         print*,'The size of your radiative transfer g-space array does '
         print*,'not match the value given in g.dat, exiting.'
         call abort
      endif
      read(111,*) gweight
      close(111)
 
      ! display the values
      print*,'Correlated-k g-space grid:'
      do n=1,L_NGAUSS
         print*,n,'.',gweight(n)
      end do
      print*,''

!=======================================================================
!     Set the reference pressure and temperature arrays.  These are
!     the pressures and temperatures at which we have k-coefficients.

!-----------------------------------------------------------------------
! pressure

      file_id='/corrk_data/' // TRIM(corrkdir) // '/p.dat'
      file_path=TRIM(datadir)//TRIM(file_id)

      ! check that the file exists
      inquire(FILE=file_path,EXIST=file_ok)
      if(.not.file_ok) then
         write(*,*)'The file ',TRIM(file_path)
         write(*,*)'was not found by sugas_corrk.F90, exiting.'
         write(*,*)'Check that your path to datagcm:',trim(datadir)
         write(*,*)' is correct. You can change it in callphys.def with:'
         write(*,*)' datadir = /absolute/path/to/datagcm'
         write(*,*)'Also check that the corrkdir you chose in callphys.def exists.'
         call abort
      endif
     
      ! get array size, load the coefficients
      open(111,file=TRIM(file_path),form='formatted')
      read(111,*) L_NPREF
      IF( .NOT. ALLOCATED( pgasref ) ) ALLOCATE( PGASREF(L_NPREF) )
      read(111,*) pgasref
      close(111)
      L_PINT = (L_NPREF-1)*5+1
      IF( .NOT. ALLOCATED( pfgasref ) ) ALLOCATE( PFGASREF(L_PINT) )

      ! display the values
      print*,'Correlated-k pressure grid (mBar):'
      do n=1,L_NPREF
         print*,n,'. 1 x 10^',pgasref(n),' mBar'
      end do
      print*,''

      ! save the min / max matrix values
      pgasmin = 10.0**pgasref(1)
      pgasmax = 10.0**pgasref(L_NPREF)

      ! interpolate to finer grid
      do n=1,L_NPREF-1
         do m=1,5
            pfgasref((n-1)*5+m) = pgasref(n)+(m-1)*0.2
         end do
      end do
      pfgasref(L_PINT) = pgasref(L_NPREF)
      ! Warning, pfgasref needs generalisation to uneven grids!

!-----------------------------------------------------------------------
! temperature

      file_id='/corrk_data/' // TRIM(corrkdir) // '/T.dat'
      file_path=TRIM(datadir)//TRIM(file_id)

      ! check that the file exists
      inquire(FILE=file_path,EXIST=file_ok)
      if(.not.file_ok) then
         write(*,*)'The file ',TRIM(file_path)
         write(*,*)'was not found by sugas_corrk.F90, exiting.'
         write(*,*)'Check that your path to datagcm:',trim(datadir)
         write(*,*)' is correct. You can change it in callphys.def with:'
         write(*,*)' datadir = /absolute/path/to/datagcm'
         write(*,*)'Also check that the corrkdir you chose in callphys.def exists.'
         call abort
      endif

      ! get array size, load the coefficients
      open(111,file=TRIM(file_path),form='formatted')
      read(111,*) L_NTREF
      IF( .NOT. ALLOCATED( tgasref ) ) ALLOCATE( TGASREF(L_NTREF) )
      read(111,*) tgasref
      close(111)

      ! display the values
      print*,'Correlated-k temperature grid:'
      do n=1,L_NTREF
         print*,n,'.',tgasref(n),' K'
      end do

      ! save the min / max matrix values
      tgasmin = tgasref(1)
      tgasmax = tgasref(L_NTREF)

!-----------------------------------------------------------------------
! allocate the multidimensional arrays in radcommon_h

      IF( .NOT. ALLOCATED( gasi8 ) ) ALLOCATE( gasi8(L_NTREF,L_NPREF,L_REFVAR,L_NSPECTI,L_NGAUSS) )
      IF( .NOT. ALLOCATED( gasv8 ) ) ALLOCATE( gasv8(L_NTREF,L_NPREF,L_REFVAR,L_NSPECTV,L_NGAUSS) )
      IF( .NOT. ALLOCATED( gasi ) ) ALLOCATE( gasi(L_NTREF,L_PINT,L_REFVAR,L_NSPECTI,L_NGAUSS) )
      IF( .NOT. ALLOCATED( gasv ) ) ALLOCATE( gasv(L_NTREF,L_PINT,L_REFVAR,L_NSPECTV,L_NGAUSS) )

      ! display the values
      print*,''
      print*,'Correlated-k matrix size:' 
      print*,'[',L_NTREF,',',L_NPREF,',',L_REFVAR,',',L_NGAUSS,']' 

!=======================================================================
!     Get gaseous k-coefficients and interpolate onto finer pressure grid

      if (graybody) then
!        constant absorption coefficient in visible
         write(*,*)"graybody: constant absorption coefficient in visible:"
         kappa_VI=-100000.
         call getin("kappa_VI",kappa_VI)
         write(*,*)" kappa_VI = ",kappa_VI
	 kappa_VI=kappa_VI*1.e4* mugaz * 1.672621e-27	 ! conversion from m^2/kg to cm^2/molecule         
      
!        constant absorption coefficient in IR
         write(*,*)"graybody: constant absorption coefficient in InfraRed:"
         kappa_IR=-100000.
         call getin("kappa_IR",kappa_IR)
         write(*,*)" kappa_IR = ",kappa_IR	 
         kappa_IR=kappa_IR*1.e4* mugaz * 1.672621e-27	 ! conversion from m^2/kg to cm^2/molecule 
	       
!        wavelength used to separate IR from VI
         IR_VI_wnlimit=3000.
         write(*,*)"graybody: Visible / Infrared separation set at",10000./IR_VI_wnlimit,"um"
	 
	 nVI_limit=L_NSPECTV
	 Do nw=1,L_NSPECTV
	    if (WNOV(nw).gt.IR_VI_wnlimit) then
	       nVI_limit=nw-1
	       exit
	    endif
	 End do
	 nIR_limit=L_NSPECTI
	 Do nw=1,L_NSPECTI
	    if (WNOI(nw).gt.IR_VI_wnlimit) then
	       nIR_limit=nw-1
	       exit
	    endif
	 End do
         write(*,*)"graybody: Visible / Infrared separation set at band ",nIR_limit,nVI_limit
	      
      End if


      ! VISIBLE
      if (callgasvis.and.(.not.TRIM(corrkdir).eq.'null').and.(.not.TRIM(corrkdir).eq.'null_LowTeffStar').and.(.not.graybody)) then
         file_id='/corrk_data/'//trim(adjustl(banddir))//'/corrk_gcm_VI.dat' 
         file_path=TRIM(datadir)//TRIM(file_id)
         
         ! check that the file exists
         inquire(FILE=file_path,EXIST=file_ok)
         if(.not.file_ok) then
            write(*,*)'The file ',TRIM(file_path)
            write(*,*)'was not found by sugas_corrk.F90.'
            write(*,*)'Are you sure you have absorption data for these bands?'
            call abort
         endif
         
         open(111,file=TRIM(file_path),form='formatted')
         read(111,*) gasv8
         close(111)

      else if (callgasvis.and.graybody) then
         if(nVI_limit.eq.0) then
	    gasv8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:L_NSPECTV,1:L_NGAUSS)=kappa_VI
         else if (nVI_limit.eq.L_NSPECTV) then
	    gasv8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:L_NSPECTV,1:L_NGAUSS)=kappa_IR
	 else
	    gasv8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:nVI_limit,1:L_NGAUSS)=kappa_IR
	    gasv8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,nVI_limit+1:L_NSPECTV,1:L_NGAUSS)=kappa_VI
	 end if
      else
         print*,'Visible corrk gaseous absorption is set to zero.'
         gasv8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:L_NSPECTV,1:L_NGAUSS)=0.0
      endif

      ! INFRA-RED
      if ((.not.TRIM(corrkdir).eq.'null').and.(.not.TRIM(corrkdir).eq.'null_LowTeffStar').and.(.not.graybody)) then
         file_id='/corrk_data/'//trim(adjustl(banddir))//'/corrk_gcm_IR.dat' 
         file_path=TRIM(datadir)//TRIM(file_id)
      
         ! check that the file exists
         inquire(FILE=file_path,EXIST=file_ok)
         if(.not.file_ok) then
            write(*,*)'The file ',TRIM(file_path)
            write(*,*)'was not found by sugas_corrk.F90.'
            write(*,*)'Are you sure you have absorption data for these bands?'
            call abort
         endif
         
         open(111,file=TRIM(file_path),form='formatted')
         read(111,*) gasi8
         close(111)
     
         ! 'fzero' is a currently unused feature that allows optimisation
         ! of the radiative transfer by neglecting bands where absorption
         ! is close to zero. As it could be useful in the future, this 
         ! section of the code has been kept commented and not erased.
         ! RW 7/3/12.

         do nw=1,L_NSPECTI
            fzeroi(nw) = 0.
!            do nt=1,L_NTREF
!               do np=1,L_NPREF
!                  do nh=1,L_REFVAR
!                     do ng = 1,L_NGAUSS
!                        if(gasi8(nt,np,nh,nw,ng).lt.1.0e-25)then
!                           fzeroi(nw)=fzeroi(nw)+1.
!                        endif
!                     end do
!                  end do
!               end do
!            end do
!            fzeroi(nw)=fzeroi(nw)/dble(L_NTREF*L_NPREF*L_REFVAR*L_NGAUSS)
         end do

         do nw=1,L_NSPECTV
            fzerov(nw) = 0.
!            do nt=1,L_NTREF
!               do np=1,L_NPREF
!                  do nh=1,L_REFVAR
!                     do ng = 1,L_NGAUSS
!                        if(gasv8(nt,np,nh,nw,ng).lt.1.0e-25)then
!                           fzerov(nw)=fzerov(nw)+1.
!                        endif
!                     end do
!                  end do
!               end do
!            end do
!            fzerov(nw)=fzerov(nw)/dble(L_NTREF*L_NPREF*L_REFVAR*L_NGAUSS)
         end do

      else if (graybody) then
         if(nIR_limit.eq.0) then
	    gasi8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:L_NSPECTI,1:L_NGAUSS)=kappa_VI
         else if (nIR_limit.eq.L_NSPECTI) then
	    gasi8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:L_NSPECTI,1:L_NGAUSS)=kappa_IR
	 else
	    gasi8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:nIR_limit,1:L_NGAUSS)=kappa_IR
	    gasi8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,nIR_limit+1:L_NSPECTI,1:L_NGAUSS)=kappa_VI
         end if
      else
         print*,'Infrared corrk gaseous absorption is set to zero.'
         gasi8(1:L_NTREF,1:L_NPREF,1:L_REFVAR,1:L_NSPECTI,1:L_NGAUSS)=0.0
      endif


!     Take log10 of the values - this is what we will interpolate.
!     Smallest value is 1.0E-200.

      do nt=1,L_NTREF
         do np=1,L_NPREF
            do nh=1,L_REFVAR
               do ng = 1,L_NGAUSS

                  do nw=1,L_NSPECTV
                     if(gasv8(nt,np,nh,nw,ng).gt.1.0d-200) then
                        gasv8(nt,np,nh,nw,ng) = log10(gasv8(nt,np,nh,nw,ng))
                     else
                        gasv8(nt,np,nh,nw,ng) = -200.0
                     end if
                  end do

                  do nw=1,L_NSPECTI
                     if(gasi8(nt,np,nh,nw,ng).gt.1.0d-200) then
                        gasi8(nt,np,nh,nw,ng) = log10(gasi8(nt,np,nh,nw,ng))
                     else
                        gasi8(nt,np,nh,nw,ng) = -200.0
                     end if
                  end do
                  
               end do
            end do
         end do
      end do

!     Interpolate the values:  first the longwave

      do nt=1,L_NTREF
         do nh=1,L_REFVAR
            do nw=1,L_NSPECTI
               do ng=1,L_NGAUSS

!     First, the initial interval

                  n = 1 
                  do m=1,5
                     x     = pfgasref(m)
                     xi(1) = pgasref(n)
                     xi(2) = pgasref(n+1)
                     xi(3) = pgasref(n+2)
                     xi(4) = pgasref(n+3)
                     yi(1) = gasi8(nt,n,nh,nw,ng)
                     yi(2) = gasi8(nt,n+1,nh,nw,ng)
                     yi(3) = gasi8(nt,n+2,nh,nw,ng)
                     yi(4) = gasi8(nt,n+3,nh,nw,ng)
                     call lagrange(x,xi,yi,ans)
                     gasi(nt,m,nh,nw,ng) = 10.0**ans
                  end do 
                  
                  do n=2,L_NPREF-2
                     do m=1,5
                        i     = (n-1)*5+m
                        x     = pfgasref(i)
                        xi(1) = pgasref(n-1)
                        xi(2) = pgasref(n)
                        xi(3) = pgasref(n+1)
                        xi(4) = pgasref(n+2)
                        yi(1) = gasi8(nt,n-1,nh,nw,ng)
                        yi(2) = gasi8(nt,n,nh,nw,ng)
                        yi(3) = gasi8(nt,n+1,nh,nw,ng)
                        yi(4) = gasi8(nt,n+2,nh,nw,ng)
                        call lagrange(x,xi,yi,ans)
                        gasi(nt,i,nh,nw,ng) = 10.0**ans
                     end do 
                  end do

!     Now, get the last interval

                  n = L_NPREF-1                 
                  do m=1,5
                     i     = (n-1)*5+m
                     x     = pfgasref(i)
                     xi(1) = pgasref(n-2)
                     xi(2) = pgasref(n-1)
                     xi(3) = pgasref(n)
                     xi(4) = pgasref(n+1)
                     yi(1) = gasi8(nt,n-2,nh,nw,ng)
                     yi(2) = gasi8(nt,n-1,nh,nw,ng)
                     yi(3) = gasi8(nt,n,nh,nw,ng)
                     yi(4) = gasi8(nt,n+1,nh,nw,ng)
                     call lagrange(x,xi,yi,ans)
                     gasi(nt,i,nh,nw,ng) = 10.0**ans
                  end do  

!     Fill the last pressure point

                  gasi(nt,L_PINT,nh,nw,ng) = &
                       10.0**gasi8(nt,L_NPREF,nh,nw,ng)

               end do
            end do
         end do
      end do

!     Interpolate the values:  now the shortwave

      do nt=1,L_NTREF
         do nh=1,L_REFVAR
            do nw=1,L_NSPECTV
               do ng=1,L_NGAUSS

!     First, the initial interval

                  n = 1 
                  do m=1,5
                     x     = pfgasref(m)
                     xi(1) = pgasref(n)
                     xi(2) = pgasref(n+1)
                     xi(3) = pgasref(n+2)
                     xi(4) = pgasref(n+3)
                     yi(1) = gasv8(nt,n,nh,nw,ng)
                     yi(2) = gasv8(nt,n+1,nh,nw,ng)
                     yi(3) = gasv8(nt,n+2,nh,nw,ng)
                     yi(4) = gasv8(nt,n+3,nh,nw,ng)
                     call lagrange(x,xi,yi,ans)
                     gasv(nt,m,nh,nw,ng) = 10.0**ans
                  end do 
                  
                  do n=2,L_NPREF-2
                     do m=1,5
                        i     = (n-1)*5+m
                        x     = pfgasref(i)
                        xi(1) = pgasref(n-1)
                        xi(2) = pgasref(n)
                        xi(3) = pgasref(n+1)
                        xi(4) = pgasref(n+2)
                        yi(1) = gasv8(nt,n-1,nh,nw,ng)
                        yi(2) = gasv8(nt,n,nh,nw,ng)
                        yi(3) = gasv8(nt,n+1,nh,nw,ng)
                        yi(4) = gasv8(nt,n+2,nh,nw,ng)
                        call lagrange(x,xi,yi,ans)
                        gasv(nt,i,nh,nw,ng) = 10.0**ans
                     end do 
                  end do

!     Now, get the last interval

                  n = L_NPREF-1
                  do m=1,5
                     i     = (n-1)*5+m
                     x     = pfgasref(i)
                     xi(1) = pgasref(n-2)
                     xi(2) = pgasref(n-1)
                     xi(3) = pgasref(n)
                     xi(4) = pgasref(n+1)
                     yi(1) = gasv8(nt,n-2,nh,nw,ng)
                     yi(2) = gasv8(nt,n-1,nh,nw,ng)
                     yi(3) = gasv8(nt,n,nh,nw,ng)
                     yi(4) = gasv8(nt,n+1,nh,nw,ng)
                     call lagrange(x,xi,yi,ans)
                     gasv(nt,i,nh,nw,ng) = 10.0**ans
                  end do  

!     Fill the last pressure point

                  gasv(nt,L_PINT,nh,nw,ng) = &
                      10.0**gasv8(nt,L_NPREF,nh,nw,ng)
                  
               end do
            end do
         end do
      end do


!=======================================================================
!     Initialise the continuum absorption data

      do igas=1,ngasmx

         if(gnom(igas).eq.'N2_')then 

            call interpolateN2N2(100.D+0,250.D+0,17500.D+0,testcont,.true.)

         elseif(gnom(igas).eq.'H2_')then

            ! first do self-induced absorption
            call interpolateH2H2(500.D+0,250.D+0,17500.D+0,testcont,.true.)
            ! then cross-interactions with other gases
            do jgas=1,ngasmx
               if(gnom(jgas).eq.'N2_')then 
                  call interpolateN2H2(592.D+0,278.15D+0,200000.D+0,10000.D+0,testcont,.true.)
               elseif(gnom(jgas).eq.'He_')then 
                  call interpolateH2He(500.D+0,250.D+0,200000.D+0,10000.D+0,testcont,.true.)
               endif
            enddo

         elseif(gnom(igas).eq.'H2O')then

            ! H2O is special 
            if(H2Ocont_simple)then
               call interpolateH2Ocont_PPC(990.D+0,296.D+0,683.2D+0*2,0.D+0,testcont,.true.)
            else
               call interpolateH2Ocont_CKD(990.D+0,296.D+0,683.2D+0*2,0.D+0,testcont,.true.)
            endif

         endif

      enddo

      print*,'----------------------------------------------------'
      print*,'And that`s all we have. It`s possible that other'
      print*,'continuum absorption may be present, but if it is we'
      print*,'don`t yet have data for it...'
      print*,''

!     Deallocate local arrays
      IF( ALLOCATED( gasi8 ) ) DEALLOCATE( gasi8 )
      IF( ALLOCATED( gasv8 ) ) DEALLOCATE( gasv8 )
      IF( ALLOCATED( pgasref ) ) DEALLOCATE( pgasref )
      IF( ALLOCATED( gastype ) ) DEALLOCATE( gastype )

      return
    end subroutine sugas_corrk