SUBROUTINE iniwrite_specVI(nid,idayref,phis)

      use radinc_h, only: L_NSPECTV
      use radcommon_h, only: WAVEV

      implicit none

c=======================================================================
c
c   Auteur:  L. Fairhead  ,  P. Le Van, Y. Wanherdrick, F. Forget
c   -------
c
c   Objet:
c   ------
c
c   'Initialize' the diagfi_spec.nc file: write down dimensions as well
c   as time-independent fields (e.g: geopotential, mesh area, ...)
c
c=======================================================================
c-----------------------------------------------------------------------
c   Declarations:
c   -------------

#include "dimensions.h"
#include "paramet.h"
!include "comconst.h"
#include "comcstfi.h"
#include "comvert.h"
#include "comgeom.h"
#include "temps.h"
#include "ener.h"
#include "logic.h"
#include "netcdf.inc"
#include "description.h"
#include "serre.h"
#include"dimphys.h"
#include"comsoil.h"

c   Arguments:
c   ----------

      integer nid        ! NetCDF file ID
      INTEGER*4 idayref  ! date (initial date for this run)
      REAL phis(ip1jmp1) ! surface geopotential

c   Local:
c   ------
      INTEGER length,l
      parameter (length = 100)
      REAL tab_cntrl(length) ! run parameters are stored in this array
      INTEGER ierr

      integer :: nvarid,idim_index,idim_rlonu,idim_rlonv
      integer :: idim_rlatu,idim_rlatv,idim_llmp1,idim_llm
 !     integer :: idim_nsoilmx ! "subsurface_layers" dimension ID #
      integer :: idim_bandsVI ! "bandsIR" dimension ID #
      integer, dimension(2) :: id  

c-----------------------------------------------------------------------

      DO l=1,length
         tab_cntrl(l)=0.
      ENDDO
      tab_cntrl(1)  = FLOAT(iim)
      tab_cntrl(2)  = FLOAT(jjm)
      tab_cntrl(3)  = FLOAT(llm)
      tab_cntrl(4)  = FLOAT(idayref)
      tab_cntrl(5)  = rad
      tab_cntrl(6)  = omeg
      tab_cntrl(7)  = g
      tab_cntrl(8)  = mugaz
      tab_cntrl(9)  = rcp
      tab_cntrl(10) = daysec
      tab_cntrl(11) = dtphys
      tab_cntrl(12) = etot0
      tab_cntrl(13) = ptot0
      tab_cntrl(14) = ztot0
      tab_cntrl(15) = stot0
      tab_cntrl(16) = ang0
c
c    ..........    P.Le Van  ( ajout le 8/04/96 )    .........
c         .....        parametres  pour le zoom          ......   
      tab_cntrl(17)  = clon
      tab_cntrl(18)  = clat
      tab_cntrl(19)  = grossismx
      tab_cntrl(20)  = grossismy
c
c     .....   ajout  le 6/05/97 et le 15/10/97  .......
c
      IF ( fxyhypb )   THEN
        tab_cntrl(21) = 1.
        tab_cntrl(22) = dzoomx
        tab_cntrl(23) = dzoomy
      ELSE
        tab_cntrl(21) = 0.
        tab_cntrl(22) = dzoomx
        tab_cntrl(23) = dzoomy
        tab_cntrl(24) = 0.
        IF( ysinus )  tab_cntrl(24) = 1.
      ENDIF

c    .........................................................

! Define dimensions
    
      ierr = NF_REDEF (nid)

      ierr = NF_DEF_DIM (nid, "index", length, idim_index)
!      ierr = NF_DEF_DIM (nid, "rlonu", iip1, idim_rlonu)
      ierr = NF_DEF_DIM (nid, "latitude", jjp1, idim_rlatu)
      ierr = NF_DEF_DIM (nid, "longitude", iip1, idim_rlonv)
!      ierr = NF_DEF_DIM (nid, "rlatv", jjm, idim_rlatv)
!      ierr = NF_DEF_DIM (nid, "interlayer", (llm+1), idim_llmp1)
      ierr = NF_DEF_DIM (nid, "altitude", llm, idim_llm)
!      ierr = NF_DEF_DIM (nid, "subsurface_layers",nsoilmx,idim_nsoilmx)
      ierr = NF_DEF_DIM (nid, "bandsVI",L_NSPECTV,idim_bandsVI)

      ierr = NF_ENDDEF(nid)

c  Contol parameters for this run
      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr = NF_DEF_VAR (nid, "controle", NF_DOUBLE, 1, 
     .       idim_index,nvarid)
#else
      ierr = NF_DEF_VAR (nid, "controle", NF_FLOAT, 1, 
     .       idim_index,nvarid)
#endif
      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"title", 18,
     .                       "Control parameters")
      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,tab_cntrl)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,tab_cntrl)
#endif

c --------------------------
c  longitudes and latitudes


c$$$      ierr = NF_REDEF (nid)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_DEF_VAR (nid, "rlonu", NF_DOUBLE, 1, idim_rlonu,nvarid)
c$$$#else
c$$$      ierr = NF_DEF_VAR (nid, "rlonu", NF_FLOAT, 1, idim_rlonu,nvarid)
c$$$#endif
c$$$      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"title", 21,
c$$$     .                       "Longitudes at u nodes")
c$$$      ierr = NF_ENDDEF(nid)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,rlonu/pi*180)
c$$$#else
c$$$      ierr = NF_PUT_VAR_REAL (nid,nvarid,rlonu/pi*180)
c$$$#endif

c --------------------------
      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr =NF_DEF_VAR(nid, "latitude", NF_DOUBLE, 1, idim_rlatu,nvarid)
#else
      ierr =NF_DEF_VAR (nid, "latitude", NF_FLOAT, 1, idim_rlatu,nvarid)
#endif
      ierr =NF_PUT_ATT_TEXT(nid,nvarid,'units',13,"degrees_north")
      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"long_name", 14,
     .      "North latitude")
      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,rlatu/pi*180)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,rlatu/pi*180)
#endif
c
c --------------------------
      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr =NF_DEF_VAR(nid,"longitude", NF_DOUBLE, 1, idim_rlonv,nvarid)
#else
      ierr = NF_DEF_VAR(nid,"longitude", NF_FLOAT, 1, idim_rlonv,nvarid)
#endif
      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"long_name", 14,
     .      "East longitude")
      ierr = NF_PUT_ATT_TEXT(nid,nvarid,'units',12,"degrees_east")
      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,rlonv/pi*180)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,rlonv/pi*180)
#endif
c
c --------------------------
      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr = NF_DEF_VAR (nid, "altitude", NF_DOUBLE, 1, 
     .       idim_llm,nvarid)
#else
      ierr = NF_DEF_VAR (nid, "altitude", NF_FLOAT, 1, 
     .       idim_llm,nvarid)
#endif
      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"long_name",10,"pseudo-alt")
      ierr = NF_PUT_ATT_TEXT (nid,nvarid,'units',2,"km")
      ierr = NF_PUT_ATT_TEXT (nid,nvarid,'positive',2,"up")

      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,pseudoalt)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,pseudoalt)
#endif


c$$$c --------------------------
c$$$      ierr = NF_REDEF (nid)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_DEF_VAR (nid, "rlatv", NF_DOUBLE, 1, idim_rlatv,nvarid)
c$$$#else
c$$$      ierr = NF_DEF_VAR (nid, "rlatv", NF_FLOAT, 1, idim_rlatv,nvarid)
c$$$#endif
c$$$      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"title", 20,
c$$$     .                       "Latitudes at v nodes")
c$$$      ierr = NF_ENDDEF(nid)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,rlatv/pi*180)
c$$$#else
c$$$      ierr = NF_PUT_VAR_REAL (nid,nvarid,rlatv/pi*180)
c$$$#endif


c$$$c --------------------------
c$$$c  Vertical levels
c$$$      call def_var(nid,"aps","hybrid pressure at midlayers ","Pa",
c$$$     .            1,idim_llm,nvarid,ierr)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,aps)
c$$$#else
c$$$      ierr = NF_PUT_VAR_REAL (nid,nvarid,aps)
c$$$#endif
c$$$
c$$$      call def_var(nid,"bps","hybrid sigma at midlayers"," ",
c$$$     .            1,idim_llm,nvarid,ierr)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,bps)
c$$$#else
c$$$      ierr = NF_PUT_VAR_REAL (nid,nvarid,bps)
c$$$#endif
c$$$
c$$$      call def_var(nid,"ap","hybrid pressure at interlayers","Pa",
c$$$     .            1,idim_llmp1,nvarid,ierr)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,ap)
c$$$#else
c$$$      ierr = NF_PUT_VAR_REAL (nid,nvarid,ap)
c$$$#endif
c$$$
c$$$      call def_var(nid,"bp","hybrid sigma at interlayers"," ",
c$$$     .            1,idim_llmp1,nvarid,ierr)
c$$$#ifdef NC_DOUBLE
c$$$      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,bp)
c$$$#else
c$$$      ierr = NF_PUT_VAR_REAL (nid,nvarid,bp)
c$$$#endif

c$$$!-------------------------------
c$$$! (soil) depth variable mlayer() (known from comsoil.h)
c$$$!-------------------------------
c$$$      ierr=NF_REDEF (nid) ! Enter NetCDF (re-)define mode
c$$$      ! define variable
c$$$#ifdef NC_DOUBLE
c$$$      ierr=NF_DEF_VAR(nid,"soildepth",NF_DOUBLE,1,idim_nsoilmx,nvarid)
c$$$#else
c$$$      ierr=NF_DEF_VAR(nid,"soildepth",NF_FLOAT,1,idim_nsoilmx,nvarid)
c$$$#endif
c$$$      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"long_name", 20,
c$$$     .                        "Soil mid-layer depth")
c$$$      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"units",1,"m")
c$$$      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"positive",4,"down")
c$$$      ierr=NF_ENDDEF(nid) ! Leave NetCDF define mode
c$$$      ! write variable
c$$$#ifdef NC_DOUBLE
c$$$      ierr=NF_PUT_VAR_DOUBLE (nid,nvarid,mlayer)
c$$$#else
c$$$      ierr=NF_PUT_VAR_REAL (nid,nvarid,mlayer)
c$$$#endif

!-------------------------------
! Number of bands in the IR
!-------------------------------

      ierr=NF_REDEF (nid) ! Enter NetCDF (re-)define mode
      ! define variable
#ifdef NC_DOUBLE
      ierr=NF_DEF_VAR(nid,"bandsVI",NF_DOUBLE,1,idim_bandsVI,nvarid)
#else
      ierr=NF_DEF_VAR(nid,"bandsVI",NF_FLOAT,1,idim_bandsVI,nvarid)
#endif
      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"long_name", 27,
     .                        "Band limits in the visible")
      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"units",1,"cm^-1")
      ierr=NF_ENDDEF(nid) ! Leave NetCDF define mode
      ! write variable
#ifdef NC_DOUBLE
      ierr=NF_PUT_VAR_DOUBLE (nid,nvarid,dble(WAVEV))
#else
      ierr=NF_PUT_VAR_REAL (nid,nvarid,real(WAVEV))
#endif

c
c --------------------------
c  Mesh area and conversion coefficients cov. <-> contra. <--> natural

      id(1)=idim_rlonu
      id(2)=idim_rlatu
c
      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr = NF_DEF_VAR (nid, "cu", NF_DOUBLE, 2, id,nvarid)
#else
      ierr = NF_DEF_VAR (nid, "cu", NF_FLOAT, 2, id,nvarid)
#endif
      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 40,
     .             "Conversion coefficients cov <--> natural")
      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,cu)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,cu)
#endif
c
      id(1)=idim_rlonv
      id(2)=idim_rlatv
c
c --------------------------
      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr = NF_DEF_VAR (nid, "cv", NF_DOUBLE, 2, id,nvarid)
#else
      ierr = NF_DEF_VAR (nid, "cv", NF_FLOAT, 2, id,nvarid)
#endif
      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 40,
     .             "Conversion coefficients cov <--> natural")
      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,cv)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,cv)
#endif
c
      id(1)=idim_rlonv
      id(2)=idim_rlatu
c
c --------------------------
      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr = NF_DEF_VAR (nid, "aire", NF_DOUBLE, 2, id,nvarid)
#else
      ierr = NF_DEF_VAR (nid, "aire", NF_FLOAT, 2, id,nvarid)
#endif
      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 9,
     .                       "Mesh area")
      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,aire)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,aire)
#endif

c  Surface geopotential
      id(1)=idim_rlonv
      id(2)=idim_rlatu

      ierr = NF_REDEF (nid)
#ifdef NC_DOUBLE
      ierr = NF_DEF_VAR (nid, "phisinit", NF_DOUBLE, 2, id,nvarid)
#else
      ierr = NF_DEF_VAR (nid, "phisinit", NF_FLOAT, 2, id,nvarid)
#endif
      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 27,
     .                       "Geopotential at the surface")
      ierr = NF_ENDDEF(nid)
#ifdef NC_DOUBLE
      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,phis)
#else
      ierr = NF_PUT_VAR_REAL (nid,nvarid,phis)
#endif,


!      write(*,*)'iniwrite: iim,jjm,llm,idayref',iim,jjm,llm,idayref
!      write(*,*)'iniwrite: rad,omeg,g,mugaz,rcp',rad,omeg,g,mugaz,rcp
!      write(*,*)'iniwrite: daysec,dtphys',daysec,dtphys

      END