!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! This routine prints out the current value of variables at all specified ! time series locations that are within the current patch. ! ! Michael G. Duda -- 25 August 2005 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SUBROUTINE calc_ts_locations( grid ) USE module_domain USE module_configure USE module_dm USE module_llxy IMPLICIT NONE ! Arguments TYPE (domain), INTENT(INOUT) :: grid ! Externals LOGICAL, EXTERNAL :: wrf_dm_on_monitor INTEGER, EXTERNAL :: get_unused_unit ! Local variables INTEGER :: ntsloc_temp INTEGER :: i, k, iunit REAL :: ts_rx, ts_ry, ts_xlat, ts_xlong, ts_hgt REAL :: known_lat, known_lon CHARACTER (LEN=132) :: message TYPE (PROJ_INFO) :: ts_proj TYPE (grid_config_rec_type) :: config_flags INTEGER :: ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & imsx, imex, jmsx, jmex, kmsx, kmex, & ipsx, ipex, jpsx, jpex, kpsx, kpex, & imsy, imey, jmsy, jmey, kmsy, kmey, & ipsy, ipey, jpsy, jpey, kpsy, kpey IF ( grid%ntsloc .LE. 0 ) RETURN #if ((EM_CORE == 1) && (DA_CORE != 1)) IF ( grid%dfi_stage == DFI_FST ) THEN #endif CALL get_ijk_from_grid ( grid , & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & imsx, imex, jmsx, jmex, kmsx, kmex, & ipsx, ipex, jpsx, jpex, kpsx, kpex, & imsy, imey, jmsy, jmey, kmsy, kmey, & ipsy, ipey, jpsy, jpey, kpsy, kpey ) CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags ) ! Set up map transformation structure CALL map_init(ts_proj) IF (ips <= 1 .AND. 1 <= ipe .AND. & jps <= 1 .AND. 1 <= jpe) THEN known_lat = grid%xlat(1,1) known_lon = grid%xlong(1,1) ELSE known_lat = 9999. known_lon = 9999. END IF known_lat = wrf_dm_min_real(known_lat) known_lon = wrf_dm_min_real(known_lon) ! Mercator IF (config_flags%map_proj == PROJ_MERC) THEN CALL map_set(PROJ_MERC, ts_proj, & truelat1 = config_flags%truelat1, & lat1 = known_lat, & lon1 = known_lon, & knowni = 1., & knownj = 1., & dx = config_flags%dx) ! Lambert conformal ELSE IF (config_flags%map_proj == PROJ_LC) THEN CALL map_set(PROJ_LC, ts_proj, & truelat1 = config_flags%truelat1, & truelat2 = config_flags%truelat2, & stdlon = config_flags%stand_lon, & lat1 = known_lat, & lon1 = known_lon, & knowni = 1., & knownj = 1., & dx = config_flags%dx) ! Polar stereographic ELSE IF (config_flags%map_proj == PROJ_PS) THEN CALL map_set(PROJ_PS, ts_proj, & truelat1 = config_flags%truelat1, & stdlon = config_flags%stand_lon, & lat1 = known_lat, & lon1 = known_lon, & knowni = 1., & knownj = 1., & dx = config_flags%dx) ! Cassini (global ARW) ELSE IF (config_flags%map_proj == PROJ_CASSINI) THEN CALL map_set(PROJ_CASSINI, ts_proj, & latinc = grid%dy*360.0/(2.0*EARTH_RADIUS_M*PI), & loninc = grid%dx*360.0/(2.0*EARTH_RADIUS_M*PI), & lat1 = known_lat, & lon1 = known_lon, & ! We still need to get POLE_LAT and POLE_LON metadata variables before ! this will work for rotated poles. lat0 = 90.0, & lon0 = 0.0, & knowni = 1., & knownj = 1., & stdlon = config_flags%stand_lon) ! Rotated latitude-longitude ELSE IF (config_flags%map_proj == PROJ_ROTLL) THEN CALL map_set(PROJ_ROTLL, ts_proj, & ! I have no idea how this should work for NMM nested domains ixdim = grid%e_we-1, & jydim = grid%e_sn-1, & phi = real(grid%e_sn-2)*grid%dy/2.0, & lambda = real(grid%e_we-2)*grid%dx, & lat1 = config_flags%cen_lat, & lon1 = config_flags%cen_lon, & latinc = grid%dy, & loninc = grid%dx, & stagger = HH) END IF ! Determine time series locations for domain IF (.NOT. grid%have_calculated_tslocs) THEN grid%have_calculated_tslocs = .TRUE. WRITE(message, '(A43,I3)') 'Computing time series locations for domain ', grid%id CALL wrf_message(message) ntsloc_temp = 0 DO k=1,grid%ntsloc CALL latlon_to_ij(ts_proj, grid%lattsloc(k), grid%lontsloc(k), ts_rx, ts_ry) ntsloc_temp = ntsloc_temp + 1 grid%itsloc(ntsloc_temp) = NINT(ts_rx) grid%jtsloc(ntsloc_temp) = NINT(ts_ry) grid%id_tsloc(ntsloc_temp) = k ! Is point outside of domain (or on the edge of domain)? IF (grid%itsloc(ntsloc_temp) < ids .OR. grid%itsloc(ntsloc_temp) > ide .OR. & grid%jtsloc(ntsloc_temp) < jds .OR. grid%jtsloc(ntsloc_temp) > jde) THEN ntsloc_temp = ntsloc_temp - 1 END IF END DO grid%next_ts_time = 1 grid%ntsloc_domain = ntsloc_temp DO k=1,grid%ntsloc_domain ! If location is outside of patch, we need to get lat/lon of TS grid cell from another patch IF (grid%itsloc(k) < ips .OR. grid%itsloc(k) > ipe .OR. & grid%jtsloc(k) < jps .OR. grid%jtsloc(k) > jpe) THEN ts_xlat = 1.E30 ts_xlong = 1.E30 ts_hgt = 1.E30 ELSE ts_xlat = grid%xlat(grid%itsloc(k),grid%jtsloc(k)) ts_xlong = grid%xlong(grid%itsloc(k),grid%jtsloc(k)) #if (EM_CORE == 1) ts_hgt = grid%ht(grid%itsloc(k),grid%jtsloc(k)) #endif END IF #if DM_PARALLEL ts_xlat = wrf_dm_min_real(ts_xlat) ts_xlong = wrf_dm_min_real(ts_xlong) ts_hgt = wrf_dm_min_real(ts_hgt) #endif IF ( wrf_dm_on_monitor() ) THEN iunit = get_unused_unit() IF ( iunit <= 0 ) THEN CALL wrf_error_fatal('Error in calc_ts_locations: could not find a free Fortran unit.') END IF WRITE(grid%ts_filename(k),'(A)') TRIM(grid%nametsloc(grid%id_tsloc(k)))//'.d00.TS' i = LEN_TRIM(grid%ts_filename(k)) WRITE(grid%ts_filename(k)(i-4:i-3),'(I2.2)') grid%id OPEN(UNIT=iunit, FILE=TRIM(grid%ts_filename(k)), FORM='FORMATTED', STATUS='REPLACE') #if (EM_CORE == 1) WRITE(UNIT=iunit, & FMT='(A26,I2,I3,A6,A2,F7.3,A1,F8.3,A3,I4,A1,I4,A3,F7.3,A1,F8.3,A2,F6.1,A7)') & grid%desctsloc(grid%id_tsloc(k))//' ', grid%id, grid%id_tsloc(k), & ' '//grid%nametsloc(grid%id_tsloc(k)), & ' (', grid%lattsloc(grid%id_tsloc(k)), ',', grid%lontsloc(grid%id_tsloc(k)), ') (', & grid%itsloc(k), ',', grid%jtsloc(k), ') (', & ts_xlat, ',', ts_xlong, ') ', & ts_hgt,' meters' #else WRITE(UNIT=iunit, & FMT='(A26,I2,I3,A6,A2,F7.3,A1,F8.3,A3,I4,A1,I4,A3,F7.3,A1,F8.3,A2)') & grid%desctsloc(grid%id_tsloc(k))//' ', grid%id, grid%id_tsloc(k), & ' '//grid%nametsloc(grid%id_tsloc(k)), & ' (', grid%lattsloc(grid%id_tsloc(k)), ',', grid%lontsloc(grid%id_tsloc(k)), ') (', & grid%itsloc(k), ',', grid%jtsloc(k), ') (', & ts_xlat, ',', ts_xlong, ') ' #endif CLOSE(UNIT=iunit) END IF END DO END IF #if ((EM_CORE == 1) && (DA_CORE != 1)) END IF #endif END SUBROUTINE calc_ts_locations SUBROUTINE calc_ts( grid ) USE module_domain USE module_model_constants IMPLICIT NONE ! Arguments TYPE (domain), INTENT(INOUT) :: grid LOGICAL, EXTERNAL :: wrf_dm_on_monitor ! Local variables INTEGER :: i, k, mm, n, ix, iy, rc REAL :: earth_u, earth_v, output_t, output_q, clw, xtime_minutes REAL, ALLOCATABLE, DIMENSION(:) :: p8w ! Parameter ts_model_level: ! TRUE to output T, Q, and wind at lowest model level ! FALSE to output T and Q at 2-m and wind at 10-m diagnostic levels: LOGICAL, PARAMETER :: ts_model_level = .FALSE. IF ( grid%ntsloc_domain .LE. 0 ) RETURN #if ((EM_CORE == 1) && (DA_CORE != 1)) IF ( grid%dfi_opt /= DFI_NODFI .AND. grid%dfi_stage /= DFI_FST ) RETURN #endif n = grid%next_ts_time ALLOCATE(p8w(grid%sm32:grid%em32)) DO i=1,grid%ntsloc_domain ix = grid%itsloc(i) iy = grid%jtsloc(i) IF (grid%sp31 <= ix .AND. ix <= grid%ep31 .AND. & grid%sp33 <= iy .AND. iy <= grid%ep33) THEN IF (ts_model_level) THEN ! ! Output from the lowest model computational level: ! #if (EM_CORE == 1) earth_u = grid%u_2(ix,1,iy)*grid%cosa(ix,iy)+grid%v_2(ix,1,iy)*grid%sina(ix,iy) earth_v = grid%v_2(ix,1,iy)*grid%cosa(ix,iy)-grid%u_2(ix,1,iy)*grid%sina(ix,iy) output_t = grid%t_2(ix,1,iy) #else earth_u = grid%u(ix,1,iy) earth_v = grid%v(ix,1,iy) output_t = grid%t(ix,1,iy) #endif output_q = grid%moist(ix,1,iy,P_QV) ELSE ! ! Output at 2-m and 10-m diagnostic levels: ! #if (EM_CORE == 1) earth_u = grid%u10(ix,iy)*grid%cosa(ix,iy)+grid%v10(ix,iy)*grid%sina(ix,iy) earth_v = grid%v10(ix,iy)*grid%cosa(ix,iy)-grid%u10(ix,iy)*grid%sina(ix,iy) output_q = grid%q2(ix,iy) #else earth_u = grid%u10(ix,iy) earth_v = grid%v10(ix,iy) output_q = grid%qsfc(ix,iy) #endif output_t = grid%t2(ix,iy) END IF #if (EM_CORE == 1) ! Calculate column-integrated liquid/ice (kg/m^2 or mm) CALL calc_p8w(grid, ix, iy, p8w, grid%sm32, grid%em32) clw=0. DO mm = 1, num_moist IF ( (mm == P_QC) .OR. (mm == P_QR) .OR. (mm == P_QI) .OR. & (mm == P_QS) .OR. (mm == P_QG) ) THEN DO k=grid%sm32,grid%em32-1 clw=clw+grid%moist(ix,k,iy,mm)*(p8w(k)-p8w(k+1)) END DO END IF END DO clw = clw / g #endif CALL domain_clock_get( grid, minutesSinceSimulationStart=xtime_minutes ) grid%ts_hour(n,i) = xtime_minutes / 60. grid%ts_u(n,i) = earth_u grid%ts_v(n,i) = earth_v grid%ts_t(n,i) = output_t grid%ts_q(n,i) = output_q grid%ts_psfc(n,i) = grid%psfc(ix,iy) #if (EM_CORE == 1) grid%ts_glw(n,i) = grid%glw(ix,iy) grid%ts_gsw(n,i) = grid%gsw(ix,iy) grid%ts_hfx(n,i) = grid%hfx(ix,iy) grid%ts_lh(n,i) = grid%lh(ix,iy) grid%ts_clw(n,i) = clw grid%ts_rainc(n,i) = grid%rainc(ix,iy) grid%ts_rainnc(n,i) = grid%rainnc(ix,iy) grid%ts_tsk(n,i) = grid%tsk(ix,iy) #else grid%ts_tsk(n,i) = grid%nmm_tsk(ix,iy) #endif grid%ts_tslb(n,i) = grid%tslb(ix,1,iy) ELSE grid%ts_hour(n,i) = 1.E30 grid%ts_u(n,i) = 1.E30 grid%ts_v(n,i) = 1.E30 grid%ts_t(n,i) = 1.E30 grid%ts_q(n,i) = 1.E30 grid%ts_psfc(n,i) = 1.E30 #if (EM_CORE == 1) grid%ts_glw(n,i) = 1.E30 grid%ts_gsw(n,i) = 1.E30 grid%ts_hfx(n,i) = 1.E30 grid%ts_lh(n,i) = 1.E30 grid%ts_clw(n,i) = 1.E30 grid%ts_rainc(n,i) = 1.E30 grid%ts_rainnc(n,i) = 1.E30 #endif grid%ts_tsk(n,i) = 1.E30 grid%ts_tslb(n,i) = 1.E30 END IF END DO DEALLOCATE(p8w) grid%next_ts_time = grid%next_ts_time + 1 IF ( grid%next_ts_time > grid%ts_buf_size ) CALL write_ts(grid) END SUBROUTINE calc_ts SUBROUTINE write_ts( grid ) USE module_dm USE module_domain IMPLICIT NONE ! Arguments TYPE (domain), INTENT(INOUT) :: grid LOGICAL, EXTERNAL :: wrf_dm_on_monitor INTEGER, EXTERNAL :: get_unused_unit ! Local variables INTEGER :: i, n, ix, iy, iunit REAL, ALLOCATABLE, DIMENSION(:,:) :: ts_buf IF ( grid%ntsloc_domain .LE. 0 ) RETURN #if ((EM_CORE == 1) && (DA_CORE != 1)) IF ( grid%dfi_opt /= DFI_NODFI .AND. grid%dfi_stage /= DFI_FST ) RETURN #endif #ifdef DM_PARALLEL ALLOCATE(ts_buf(grid%ts_buf_size,grid%max_ts_locs)) ts_buf(:,:) = grid%ts_hour(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_hour(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_u(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_u(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_v(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_v(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_t(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_t(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_q(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_q(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_psfc(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_psfc(:,:),grid%ts_buf_size*grid%max_ts_locs) #if (EM_CORE == 1) ts_buf(:,:) = grid%ts_glw(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_glw(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_gsw(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_gsw(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_hfx(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_hfx(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_lh(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_lh(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_clw(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_clw(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_rainc(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_rainc(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_rainnc(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_rainnc(:,:),grid%ts_buf_size*grid%max_ts_locs) #endif ts_buf(:,:) = grid%ts_tsk(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_tsk(:,:),grid%ts_buf_size*grid%max_ts_locs) ts_buf(:,:) = grid%ts_tslb(:,:) CALL wrf_dm_min_reals(ts_buf(:,:),grid%ts_tslb(:,:),grid%ts_buf_size*grid%max_ts_locs) DEALLOCATE(ts_buf) #endif IF ( wrf_dm_on_monitor() ) THEN iunit = get_unused_unit() IF ( iunit <= 0 ) THEN CALL wrf_error_fatal('Error in write_ts: could not find a free Fortran unit.') END IF DO i=1,grid%ntsloc_domain ix = grid%itsloc(i) iy = grid%jtsloc(i) OPEN(UNIT=iunit, FILE=TRIM(grid%ts_filename(i)), STATUS='unknown', POSITION='append', FORM='formatted') DO n=1,grid%next_ts_time - 1 #if (EM_CORE == 1) WRITE(UNIT=iunit,FMT='(i2,f13.6,i5,i5,i5,1x,14(f13.5,1x))') & grid%id, grid%ts_hour(n,i), & grid%id_tsloc(i), ix, iy, & grid%ts_t(n,i), & grid%ts_q(n,i), & grid%ts_u(n,i), & grid%ts_v(n,i), & grid%ts_psfc(n,i), & grid%ts_glw(n,i), & grid%ts_gsw(n,i), & grid%ts_hfx(n,i), & grid%ts_lh(n,i), & grid%ts_tsk(n,i), & grid%ts_tslb(n,i), & grid%ts_rainc(n,i), & grid%ts_rainnc(n,i), & grid%ts_clw(n,i) #else WRITE(UNIT=iunit,FMT='(i2,f13.6,i5,i5,i5,1x,7(f13.5,1x))') & grid%id, grid%ts_hour(n,i), & grid%id_tsloc(i), ix, iy, & grid%ts_t(n,i), & grid%ts_q(n,i), & grid%ts_u(n,i), & grid%ts_v(n,i), & grid%ts_psfc(n,i), & grid%ts_tsk(n,i), & grid%ts_tslb(n,i) #endif END DO CLOSE(UNIT=iunit) END DO END IF grid%next_ts_time = 1 END SUBROUTINE write_ts #if (EM_CORE == 1) SUBROUTINE calc_p8w(grid, ix, iy, p8w, k_start, k_end) USE module_domain USE module_model_constants IMPLICIT NONE ! Arguments TYPE (domain), INTENT(IN) :: grid INTEGER, INTENT(IN) :: ix, iy, k_start, k_end REAL, DIMENSION(k_start:k_end), INTENT(OUT) :: p8w ! Local variables INTEGER :: k REAL :: z0, z1, z2, w1, w2 REAL, DIMENSION(k_start:k_end) :: z_at_w REAL, DIMENSION(k_start:k_end-1) :: z DO k = k_start, k_end z_at_w(k) = (grid%phb(ix,k,iy)+grid%ph_2(ix,k,iy))/g END DO DO k = k_start, k_end-1 z(k) = 0.5*(z_at_w(k) + z_at_w(k+1)) END DO DO k = k_start+1, k_end-1 p8w(k) = grid%fnm(k)*(grid%p(ix,k,iy)+grid%pb(ix,k,iy)) + & grid%fnp(k)*(grid%p(ix,k-1,iy)+grid%pb(ix,k-1,iy)) END DO z0 = z_at_w(k_start) z1 = z(k_start) z2 = z(k_start+1) w1 = (z0 - z2)/(z1 - z2) w2 = 1. - w1 p8w(k_start) = w1*(grid%p(ix,k_start,iy)+grid%pb(ix,k_start,iy)) + & w2*(grid%p(ix,k_start+1,iy)+grid%pb(ix,k_start+1,iy)) z0 = z_at_w(k_end) z1 = z(k_end-1) z2 = z(k_end-2) w1 = (z0 - z2)/(z1 - z2) w2 = 1. - w1 p8w(k_end) = exp(w1*log(grid%p(ix,k_end-1,iy)+grid%pb(ix,k_end-1,iy)) + & w2*log(grid%p(ix,k_end-2,iy)+grid%pb(ix,k_end-2,iy))) END SUBROUTINE calc_p8w #endif