#if ( ! NMM_CORE == 1 ) MODULE module_soil_pre USE module_date_time USE module_state_description CONTAINS SUBROUTINE adjust_for_seaice_pre ( xice , landmask , tsk , ivgtyp , vegcat , lu_index , & xland , landusef , isltyp , soilcat , soilctop , & soilcbot , tmn , & seaice_threshold , & num_veg_cat , num_soil_top_cat , num_soil_bot_cat , & iswater , isice , & scheme , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater , isice INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , & vegcat, xland , soilcat , tmn REAL , INTENT(IN) :: seaice_threshold INTEGER :: i , j , num_seaice_changes , loop CHARACTER (LEN=132) :: message num_seaice_changes = 0 fix_seaice : SELECT CASE ( scheme ) CASE ( SLABSCHEME ) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( xice(i,j) .GT. 200.0 ) THEN xice(i,j) = 0. num_seaice_changes = num_seaice_changes + 1 END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total pre number of sea ice locations removed (due to FLAG values) = ', & num_seaice_changes CALL wrf_debug ( 0 , message ) END IF num_seaice_changes = 0 DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( ( xice(i,j) .GE. 0.5 ) .OR. & ( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN xice(i,j) = 1. num_seaice_changes = num_seaice_changes + 1 if(landmask(i,j) .LT. 0.5 )tmn(i,j) = 271.4 vegcat(i,j)=isice ivgtyp(i,j)=isice lu_index(i,j)=isice landmask(i,j)=1. xland(i,j)=1. DO loop=1,num_veg_cat landusef(i,loop,j)=0. END DO landusef(i,ivgtyp(i,j),j)=1. isltyp(i,j) = 16 soilcat(i,j)=isltyp(i,j) DO loop=1,num_soil_top_cat soilctop(i,loop,j)=0 END DO DO loop=1,num_soil_bot_cat soilcbot(i,loop,j)=0 END DO soilctop(i,isltyp(i,j),j)=1. soilcbot(i,isltyp(i,j),j)=1. END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total pre number of sea ice location changes (water to land) = ', num_seaice_changes CALL wrf_debug ( 0 , message ) END IF CASE ( LSMSCHEME , RUCLSMSCHEME ) num_seaice_changes = 0 DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .GT. 0.5 ) THEN if (xice(i,j).gt.0) num_seaice_changes = num_seaice_changes + 1 xice(i,j) = 0. END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total pre number of land location changes (seaice set to zero) = ', num_seaice_changes CALL wrf_debug ( 0 , message ) END IF END SELECT fix_seaice END SUBROUTINE adjust_for_seaice_pre SUBROUTINE adjust_for_seaice_post ( xice , landmask , tsk_old , tsk , ivgtyp , vegcat , lu_index , & xland , landusef , isltyp , soilcat , soilctop , & soilcbot , tmn , vegfra , & tslb , smois , sh2o , & seaice_threshold , & num_veg_cat , num_soil_top_cat , num_soil_bot_cat , & num_soil_layers , & iswater , isice , & scheme , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater , isice INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme INTEGER , INTENT(IN) :: num_soil_layers REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot REAL , DIMENSION(ims:ime,1:num_soil_layers,jms:jme) , INTENT(INOUT):: tslb , smois , sh2o INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , & vegcat, xland , soilcat , tmn , & tsk_old , vegfra REAL , INTENT(IN) :: seaice_threshold REAL :: total_depth , mid_point_depth INTEGER :: i , j , num_seaice_changes , loop CHARACTER (LEN=132) :: message num_seaice_changes = 0 fix_seaice : SELECT CASE ( scheme ) CASE ( SLABSCHEME ) CASE ( LSMSCHEME , RUCLSMSCHEME ) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( xice(i,j) .GT. 200.0 ) THEN xice(i,j) = 0. num_seaice_changes = num_seaice_changes + 1 END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total post number of sea ice locations removed (due to FLAG values) = ', & num_seaice_changes CALL wrf_debug ( 0 , message ) END IF num_seaice_changes = 0 DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( ( ( tsk(i,j) .LT. 170 ) .OR. ( tsk(i,j) .GT. 400 ) ) .AND. & ( ( tsk_old(i,j) .GT. 170 ) .AND. ( tsk_old(i,j) .LT. 400 ) ) )THEN tsk(i,j) = tsk_old(i,j) END IF IF ( ( ( tsk(i,j) .LT. 170 ) .OR. ( tsk(i,j) .GT. 400 ) ) .AND. & ( ( tsk_old(i,j) .LT. 170 ) .OR. ( tsk_old(i,j) .GT. 400 ) ) )THEN print *,'TSK woes in seaice post, i,j=',i,j,' tsk = ',tsk(i,j), tsk_old(i,j) CALL wrf_error_fatal ( 'TSK is unrealistic, problems for seaice post') ELSE IF ( ( xice(i,j) .GE. 0.5 ) .OR. & ( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN xice(i,j) = 1. num_seaice_changes = num_seaice_changes + 1 if(landmask(i,j) .LT. 0.5 )tmn(i,j) = 271.4 vegcat(i,j)=isice ivgtyp(i,j)=isice lu_index(i,j)=isice landmask(i,j)=1. xland(i,j)=1. vegfra(i,j)=0. DO loop=1,num_veg_cat landusef(i,loop,j)=0. END DO landusef(i,ivgtyp(i,j),j)=1. tsk_old(i,j) = tsk(i,j) isltyp(i,j) = 16 soilcat(i,j)=isltyp(i,j) DO loop=1,num_soil_top_cat soilctop(i,loop,j)=0 END DO DO loop=1,num_soil_bot_cat soilcbot(i,loop,j)=0 END DO soilctop(i,isltyp(i,j),j)=1. soilcbot(i,isltyp(i,j),j)=1. total_depth = 3. ! ice is 3 m deep, num_soil_layers equispaced layers DO loop = 1,num_soil_layers mid_point_depth=(total_depth/num_soil_layers)/2. + & (loop-1)*(total_depth/num_soil_layers) tslb(i,loop,j) = ( (total_depth-mid_point_depth)*tsk(i,j) + & mid_point_depth*tmn(i,j) ) / total_depth END DO DO loop=1,num_soil_layers smois(i,loop,j) = 1.0 sh2o(i,loop,j) = 0.0 END DO ELSE IF ( xice(i,j) .LT. 0.5 ) THEN xice(i,j) = 0. END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total post number of sea ice location changes (water to land) = ', num_seaice_changes CALL wrf_debug ( 0 , message ) END IF END SELECT fix_seaice END SUBROUTINE adjust_for_seaice_post SUBROUTINE process_percent_cat_new ( landmask , & landuse_frac , soil_top_cat , soil_bot_cat , & isltyp , ivgtyp , & num_veg_cat , num_soil_top_cat , num_soil_bot_cat , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landuse_frac REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(IN):: soil_top_cat REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(IN):: soil_bot_cat INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask INTEGER :: i , j , l , ll, dominant_index REAL :: dominant_value #ifdef WRF_CHEM ! REAL :: lwthresh = .99 REAL :: lwthresh = .50 #else REAL :: lwthresh = .50 #endif INTEGER , PARAMETER :: iswater_soil = 14 INTEGER :: iforce CHARACTER (LEN=132) :: message integer :: change_water , change_land change_water = 0 change_land = 0 ! Sanity check on the 50/50 points DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) dominant_value = landuse_frac(i,iswater,j) IF ( dominant_value .EQ. lwthresh ) THEN DO l = 1 , num_veg_cat IF ( l .EQ. iswater ) CYCLE IF ( ( landuse_frac(i,l,j) .EQ. lwthresh ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN PRINT *,i,j,' water and category ',l,' both at 50%, landmask is ',landmask(i,j) landuse_frac(i,l,j) = lwthresh - .01 landuse_frac(i,iswater,j) = lwthresh + 0.01 ELSE IF ( ( landuse_frac(i,l,j) .EQ. lwthresh ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN PRINT *,i,j,' water and category ',l,' both at 50%, landmask is ',landmask(i,j) landuse_frac(i,l,j) = lwthresh + .01 landuse_frac(i,iswater,j) = lwthresh - 0.01 END IF END DO END IF END DO END DO ! Compute the dominant VEGETATION INDEX. DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) dominant_value = landuse_frac(i,1,j) dominant_index = 1 DO l = 2 , num_veg_cat IF ( l .EQ. iswater ) THEN ! wait a bit ELSE IF ( ( l .NE. iswater ) .AND. ( landuse_frac(i,l,j) .GT. dominant_value ) ) THEN dominant_value = landuse_frac(i,l,j) dominant_index = l END IF END DO IF ( landuse_frac(i,iswater,j) .GT. lwthresh ) THEN dominant_value = landuse_frac(i,iswater,j) dominant_index = iswater ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh) .AND. & ( landmask(i,j) .LT. 0.5) .AND. & ( dominant_value .EQ. lwthresh) ) THEN dominant_value = landuse_frac(i,iswater,j) dominant_index = iswater ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh) .AND. & ( landmask(i,j) .GT. 0.5) .AND. & ( dominant_value .EQ. lwthresh) ) THEN !no op ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh ) .AND. & ( dominant_value .LT. lwthresh ) ) THEN dominant_value = landuse_frac(i,iswater,j) dominant_index = iswater END IF IF ( dominant_index .EQ. iswater ) THEN if(landmask(i,j).gt.lwthresh) then !print *,'changing to water at point ',i,j !print '(24(i3,1x))',1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16, 17,18,19,20,21, 22, 23,24 !print '(24(i3,1x))',nint(landuse_frac(i,:,j)*100) change_water=change_water+1 endif landmask(i,j) = 0 ELSE IF ( dominant_index .NE. iswater ) THEN if(landmask(i,j).lt.lwthresh) then !print *,'changing to land at point ',i,j !print '(24(i3,1x))',1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16, 17,18,19,20,21, 22, 23,24 !print '(24(i3,1x))',nint(landuse_frac(i,:,j)*100) change_land=change_land+1 endif landmask(i,j) = 1 END IF ivgtyp(i,j) = dominant_index END DO END DO ! Compute the dominant SOIL TEXTURE INDEX, TOP. iforce = 0 DO i = its , MIN(ide-1,ite) DO j = jts , MIN(jde-1,jte) dominant_value = soil_top_cat(i,1,j) dominant_index = 1 IF ( landmask(i,j) .GT. lwthresh ) THEN DO l = 2 , num_soil_top_cat IF ( ( l .NE. iswater_soil ) .AND. ( soil_top_cat(i,l,j) .GT. dominant_value ) ) THEN dominant_value = soil_top_cat(i,l,j) dominant_index = l END IF END DO IF ( dominant_value .LT. 0.01 ) THEN iforce = iforce + 1 WRITE ( message , FMT = '(A,I4,I4)' ) & 'based on landuse, changing soil to land at point ',i,j CALL wrf_debug(1,message) WRITE ( message , FMT = '(16(i3,1x))' ) & 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16 CALL wrf_debug(1,message) WRITE ( message , FMT = '(16(i3,1x))' ) & nint(soil_top_cat(i,:,j)*100) CALL wrf_debug(1,message) dominant_index = 8 END IF ELSE dominant_index = iswater_soil END IF isltyp(i,j) = dominant_index END DO END DO if(iforce.ne.0)then WRITE(message,FMT='(A,I4,A,I6)' ) & 'forcing artificial silty clay loam at ',iforce,' points, out of ',& (MIN(ide-1,ite)-its+1)*(MIN(jde-1,jte)-jts+1) CALL wrf_debug(0,message) endif print *,'LAND CHANGE = ',change_land print *,'WATER CHANGE = ',change_water END SUBROUTINE process_percent_cat_new SUBROUTINE process_soil_real ( tsk , tmn , & landmask , sst , & st_input , sm_input , sw_input , st_levels_input , sm_levels_input , sw_levels_input , & zs , dzs , tslb , smois , sh2o , & flag_sst , flag_soilt000, flag_soilm000, & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & sf_surface_physics , num_soil_layers , real_data_init_type , & num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & sf_surface_physics , num_soil_layers , real_data_init_type , & num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000 REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk INTEGER :: i , j , l , dominant_index , num_soil_cat , num_veg_cat REAL :: dominant_value ! Initialize the soil depth, and the soil temperature and moisture. IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_1 ( zs , dzs , num_soil_layers ) CALL init_soil_1_real ( tsk , tmn , tslb , zs , dzs , num_soil_layers , real_data_init_type , & landmask , sst , flag_sst , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) ELSE IF ( ( sf_surface_physics .EQ. 2 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_2 ( zs , dzs , num_soil_layers ) CALL init_soil_2_real ( tsk , tmn , smois , sh2o , tslb , & st_input , sm_input , sw_input , landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , sw_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) ! CALL init_soil_old ( tsk , tmn , & ! smois , tslb , zs , dzs , num_soil_layers , & ! st000010_input , st010040_input , st040100_input , st100200_input , & ! st010200_input , & ! sm000010_input , sm010040_input , sm040100_input , sm100200_input , & ! sm010200_input , & ! landmask_input , sst_input , & ! ids , ide , jds , jde , kds , kde , & ! ims , ime , jms , jme , kms , kme , & ! its , ite , jts , jte , kts , kte ) ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_3 ( zs , dzs , num_soil_layers ) CALL init_soil_3_real ( tsk , tmn , smois , tslb , & st_input , sm_input , landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) ELSE IF ( ( sf_surface_physics .EQ. 7 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_7 ( zs , dzs , num_soil_layers ) CALL init_soil_7_real ( tsk , tmn , smois , sh2o, tslb , & st_input , sm_input , sw_input, landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , sw_levels_input, & num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) END IF END SUBROUTINE process_soil_real SUBROUTINE process_soil_ideal ( xland,xice,vegfra,snow,canwat, & ivgtyp,isltyp,tslb,smois, & tsk,tmn,zs,dzs, & num_soil_layers, & sf_surface_physics , & ids,ide, jds,jde, kds,kde,& ims,ime, jms,jme, kms,kme,& its,ite, jts,jte, kts,kte ) IMPLICIT NONE INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte INTEGER, INTENT(IN) :: num_soil_layers , sf_surface_physics REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(INOUT) :: smois, tslb REAL, DIMENSION(num_soil_layers), INTENT(OUT) :: dzs,zs REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(INOUT) :: tsk, tmn REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: xland, snow, canwat, xice, vegfra INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp ! Local variables. INTEGER :: itf,jtf itf=MIN(ite,ide-1) jtf=MIN(jte,jde-1) IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_1 ( zs , dzs , num_soil_layers ) CALL init_soil_1_ideal(tsk,tmn,tslb,xland, & ivgtyp,zs,dzs,num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) ELSE IF ( ( sf_surface_physics .EQ. 2 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_2 ( zs , dzs , num_soil_layers ) CALL init_soil_2_ideal ( xland,xice,vegfra,snow,canwat, & ivgtyp,isltyp,tslb,smois,tmn, & num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_3 ( zs , dzs , num_soil_layers ) END IF END SUBROUTINE process_soil_ideal SUBROUTINE adjust_soil_temp_new ( tmn , sf_surface_physics , & tsk , ter , toposoil , landmask , flag_toposoil , flag_tavgsfc , & st000010 , st010040 , st040100 , st100200 , st010200 , & flag_st000010 , flag_st010040 , flag_st040100 , flag_st100200 , flag_st010200 , & st000007 , st007028 , st028100 , st100255 , & flag_st000007 , flag_st007028 , flag_st028100 , flag_st100255 , & soilt000 , soilt005 , soilt020 , soilt040 , soilt160 , soilt300 , & flag_soilt000 , flag_soilt005 , flag_soilt020 , flag_soilt040 , flag_soilt160 , flag_soilt300 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: ter , toposoil , landmask REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tmn , tsk REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: st000010 , st010040 , st040100 , st100200 , st010200 REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: st000007 , st007028 , st028100 , st100255 REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: soilt000 , soilt005 , soilt020 , soilt040 , soilt160 , soilt300 INTEGER , INTENT(IN) :: flag_st000010 , flag_st010040 , flag_st040100 , flag_st100200 , flag_st010200 INTEGER , INTENT(IN) :: flag_st000007 , flag_st007028 , flag_st028100 , flag_st100255 INTEGER , INTENT(IN) :: flag_soilt000 , flag_soilt005 , flag_soilt020 , flag_soilt040 , flag_soilt160 , flag_soilt300 INTEGER , INTENT(IN) :: sf_surface_physics , flag_toposoil , flag_tavgsfc INTEGER :: i , j REAL :: soil_elev_min_val , soil_elev_max_val , soil_elev_min_dif , soil_elev_max_dif ! Adjust the annual mean temperature as if it is based on from a sea-level elevation ! if the value used is from the actual annula mean data set. If the input field to ! be used for tmn is one of the first-guess input temp fields, need to do an adjustment ! only on the diff in topo from the model terrain and the first-guess terrain. SELECT CASE ( sf_surface_physics ) CASE (LSMSCHEME) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF (landmask(i,j) .GT. 0.5 ) THEN tmn(i,j) = tmn(i,j) - 0.0065 * ter(i,j) END IF END DO END DO CASE (RUCLSMSCHEME) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF (landmask(i,j) .GT. 0.5 ) THEN tmn(i,j) = tmn(i,j) - 0.0065 * ter(i,j) END IF END DO END DO END SELECT ! Do we have a soil field with which to modify soil temperatures? IF ( flag_toposoil .EQ. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) ! Is the toposoil field OK, or is it a subversive soil elevation field. We can tell ! usually by looking at values. Anything less than -1000 m (lower than the Dead Sea) is ! bad. Anything larger than 10 km (taller than Everest) is toast. Also, anything where ! the difference between the soil elevation and the terrain is greater than 3 km means ! that the soil data is either all zeros or that the data are inconsistent. Any of these ! three conditions is grievous enough to induce a WRF fatality. However, if they are at ! a water point, then we can safely ignore them. soil_elev_min_val = toposoil(i,j) soil_elev_max_val = toposoil(i,j) soil_elev_min_dif = ter(i,j) - toposoil(i,j) soil_elev_max_dif = ter(i,j) - toposoil(i,j) IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN CYCLE ELSE IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN !print *,'no soil temperature elevation adjustment, soil height too small = ',toposoil(i,j) cycle ! CALL wrf_error_fatal ( 'TOPOSOIL values have large negative values < -1000 m, unrealistic.' ) ENDIF IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN CYCLE ELSE IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN print *,'no soil temperature elevation adjustment, soil height too high = ',toposoil(i,j) cycle CALL wrf_error_fatal ( 'TOPOSOIL values have large positive values > 10,000 m , unrealistic.' ) ENDIF IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. & ( landmask(i,j) .LT. 0.5 ) ) THEN CYCLE ELSE IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. & ( landmask(i,j) .GT. 0.5 ) ) THEN print *,'no soil temperature elevation adjustment, diff of soil height and terrain = ',ter(i,j) - toposoil(i,j) cycle CALL wrf_error_fatal ( 'TOPOSOIL difference with terrain elevation differs by more than 3000 m, unrealistic' ) ENDIF ! For each of the fields that we would like to modify, check to see if it came in from the SI. ! If so, then use a -6.5 K/km lapse rate (based on the elevation diffs). We only adjust when we ! are not at a water point. IF (landmask(i,j) .GT. 0.5 ) THEN IF ( sf_surface_physics .EQ. SLABSCHEME ) THEN IF ( ( flag_tavgsfc .EQ. 1 ) .OR. & ( flag_st010040 .EQ. 1 ) .OR. & ( flag_st000010 .EQ. 1 ) .OR. & ( flag_soilt020 .EQ. 1 ) .OR. & ( flag_st007028 .EQ. 1 ) ) THEN tmn(i,j) = tmn(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) ELSE tmn(i,j) = tmn(i,j) - 0.0065 * ter(i,j) END IF END IF tsk(i,j) = tsk(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) IF ( flag_st000010 .EQ. 1 ) THEN st000010(i,j) = st000010(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st010040 .EQ. 1 ) THEN st010040(i,j) = st010040(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st040100 .EQ. 1 ) THEN st040100(i,j) = st040100(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st100200 .EQ. 1 ) THEN st100200(i,j) = st100200(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st010200 .EQ. 1 ) THEN st010200(i,j) = st010200(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st000007 .EQ. 1 ) THEN st000007(i,j) = st000007(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st007028 .EQ. 1 ) THEN st007028(i,j) = st007028(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st028100 .EQ. 1 ) THEN st028100(i,j) = st028100(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st100255 .EQ. 1 ) THEN st100255(i,j) = st100255(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt000 .EQ. 1 ) THEN soilt000(i,j) = soilt000(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt005 .EQ. 1 ) THEN soilt005(i,j) = soilt005(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt020 .EQ. 1 ) THEN soilt020(i,j) = soilt020(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt040 .EQ. 1 ) THEN soilt040(i,j) = soilt040(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt160 .EQ. 1 ) THEN soilt160(i,j) = soilt160(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt300 .EQ. 1 ) THEN soilt300(i,j) = soilt300(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF END IF END DO END DO END IF END SUBROUTINE adjust_soil_temp_new SUBROUTINE init_soil_depth_1 ( zs , dzs , num_soil_layers ) IMPLICIT NONE INTEGER, INTENT(IN) :: num_soil_layers REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs INTEGER :: l ! Define layers (top layer = 0.01 m). Double the thicknesses at each step (dzs values). ! The distance from the ground level to the midpoint of the layer is given by zs. ! ------- Ground Level ---------- || || || || ! || || || || zs(1) = 0.005 m ! -- -- -- -- -- -- -- -- -- || || || \/ ! || || || ! ----------------------------------- || || || \/ dzs(1) = 0.01 m ! || || || ! || || || zs(2) = 0.02 ! -- -- -- -- -- -- -- -- -- || || \/ ! || || ! || || ! ----------------------------------- || || \/ dzs(2) = 0.02 m ! || || ! || || ! || || ! || || zs(3) = 0.05 ! -- -- -- -- -- -- -- -- -- || \/ ! || ! || ! || ! || ! ----------------------------------- \/ dzs(3) = 0.04 m IF ( num_soil_layers .NE. 5 ) THEN PRINT '(A)','Usually, the 5-layer diffusion uses 5 layers. Change this in the namelist.' CALL wrf_error_fatal ( '5-layer_diffusion_uses_5_layers' ) END IF dzs(1)=.01 zs(1)=.5*dzs(1) DO l=2,num_soil_layers dzs(l)=2*dzs(l-1) zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l) ENDDO END SUBROUTINE init_soil_depth_1 SUBROUTINE init_soil_depth_2 ( zs , dzs , num_soil_layers ) IMPLICIT NONE INTEGER, INTENT(IN) :: num_soil_layers REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs INTEGER :: l dzs = (/ 0.1 , 0.3 , 0.6 , 1.0 /) IF ( num_soil_layers .NE. 4 ) THEN PRINT '(A)','Usually, the LSM uses 4 layers. Change this in the namelist.' CALL wrf_error_fatal ( 'LSM_uses_4_layers' ) END IF zs(1)=.5*dzs(1) DO l=2,num_soil_layers zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l) ENDDO END SUBROUTINE init_soil_depth_2 SUBROUTINE init_soil_depth_3 ( zs , dzs , num_soil_layers ) IMPLICIT NONE INTEGER, INTENT(IN) :: num_soil_layers REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs INTEGER :: l CHARACTER (LEN=132) :: message ! in RUC LSM ZS - soil levels, and DZS - soil layer thicknesses, not used ! ZS is specified in the namelist: num_soil_layers = 6 or 9. ! Other options with number of levels are possible, but ! WRF users should change consistently the namelist entry with the ! ZS array in this subroutine. IF ( num_soil_layers .EQ. 6) THEN zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 1.60 , 3.00 /) ! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /) ELSEIF ( num_soil_layers .EQ. 9) THEN zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 0.60, 1.00, 1.60 , 2.20, 3.00 /) ! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /) ENDIF IF ( num_soil_layers .EQ. 4 .OR. num_soil_layers .EQ. 5 ) THEN write (message, FMT='(A)') 'The RUC LSM uses 6, 9 or more levels. Change this in the namelist.' CALL wrf_error_fatal ( message ) END IF END SUBROUTINE init_soil_depth_3 SUBROUTINE init_soil_depth_7 ( zs , dzs , num_soil_layers ) IMPLICIT NONE INTEGER, INTENT(IN) :: num_soil_layers REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs INTEGER :: l dzs = (/ 0.01 , 0.99 /) IF ( num_soil_layers .NE. 2 ) THEN PRINT '(A)','Usually, the PX LSM uses 2 layers. Change this in the namelist.' CALL wrf_error_fatal ( 'PXLSM_uses_2_layers' ) END IF zs(1) = 0.5 * dzs(1) zs(2) = dzs(1) + 0.5 * dzs(2) END SUBROUTINE init_soil_depth_7 SUBROUTINE init_soil_1_real ( tsk , tmn , tslb , zs , dzs , & num_soil_layers , real_data_init_type , & landmask , sst , flag_sst , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: num_soil_layers , real_data_init_type , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte INTEGER , INTENT(IN) :: flag_sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tsk , tmn REAL , DIMENSION(num_soil_layers) :: zs , dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb INTEGER :: i , j , l ! Soil temperature is linearly interpolated between the skin temperature (taken to be at a ! depth of 0.5 cm) and the deep soil, annual temperature (taken to be at a depth of 23 cm). ! The tslb(i,1,j) is the skin temperature, and the tslb(i,num_soil_layers,j) level is the ! annual mean temperature. DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .GT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= ( tsk(i,j) * ( zs(num_soil_layers) - zs(l) ) + & tmn(i,j) * ( zs( l) - zs(1) ) ) / & ( zs(num_soil_layers) - zs(1) ) END DO ELSE IF ( ( real_data_init_type .EQ. 1 ) .AND. ( flag_sst .EQ. 1 ) ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= sst(i,j) END DO ELSE DO l = 1 , num_soil_layers tslb(i,l,j)= tsk(i,j) END DO END IF END IF END DO END DO END SUBROUTINE init_soil_1_real SUBROUTINE init_soil_1_ideal(tsk,tmn,tslb,xland, & ivgtyp,ZS,DZS,num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE INTEGER, INTENT(IN ) :: ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte INTEGER, INTENT(IN ) :: num_soil_layers REAL, DIMENSION( ims:ime , num_soil_layers , jms:jme ), INTENT(OUT) :: tslb REAL, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: xland INTEGER, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: ivgtyp REAL, DIMENSION(1:), INTENT(IN) :: dzs,zs REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(IN) :: tsk, tmn ! Lcal variables. INTEGER :: l,j,i,itf,jtf itf=MIN(ite,ide-1) jtf=MIN(jte,jde-1) IF (num_soil_layers.NE.1)THEN DO j=jts,jtf DO l=1,num_soil_layers DO i=its,itf tslb(i,l,j)=( tsk(i,j)*(zs(num_soil_layers)-zs(l)) + tmn(i,j)*(zs(l)-zs(1)) ) / & ( zs(num_soil_layers)-zs(1) ) ENDDO ENDDO ENDDO ENDIF ! DO j=jts,jtf ! DO i=its,itf ! xland(i,j) = 2 ! ivgtyp(i,j) = 7 ! ENDDO ! ENDDO END SUBROUTINE init_soil_1_ideal SUBROUTINE init_soil_2_real ( tsk , tmn , smois , sh2o , tslb , & st_input , sm_input , sw_input , landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , sw_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: num_soil_layers , & num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000 INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk REAL , DIMENSION(num_soil_layers) :: zs , dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o REAL , ALLOCATABLE , DIMENSION(:) :: zhave INTEGER :: i , j , l , lout , lin , lwant , lhave , num REAL :: temp LOGICAL :: found_levels CHARACTER (LEN=132) :: message ! Are there any soil temp and moisture levels - ya know, they are mandatory. num = num_st_levels_input * num_sm_levels_input IF ( num .GE. 1 ) THEN ! Ordered levels that we have data for. !tgs add option to initialize from RUCLSM IF ( flag_soilt000 .eq. 1 ) THEN write(message, FMT='(A)') ' Assume RUC LSM 6-level input' CALL wrf_message ( message ) ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) ) ) ELSE write(message, FMT='(A)') ' Assume Noah LSM input' CALL wrf_message ( message ) ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) +2) ) END IF ! Sort the levels for temperature. outert : DO lout = 1 , num_st_levels_input-1 innert : DO lin = lout+1 , num_st_levels_input IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN temp = st_levels_input(lout) st_levels_input(lout) = st_levels_input(lin) st_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = st_input(i,lout+1,j) st_input(i,lout+1,j) = st_input(i,lin+1,j) st_input(i,lin+1,j) = temp END DO END DO END IF END DO innert END DO outert !tgs add IF IF ( flag_soilt000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) st_input(i,1,j) = tsk(i,j) st_input(i,num_st_levels_input+2,j) = tmn(i,j) END DO END DO ENDIF ! Sort the levels for moisture. outerm: DO lout = 1 , num_sm_levels_input-1 innerm : DO lin = lout+1 , num_sm_levels_input IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN temp = sm_levels_input(lout) sm_levels_input(lout) = sm_levels_input(lin) sm_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sm_input(i,lout+1,j) sm_input(i,lout+1,j) = sm_input(i,lin+1,j) sm_input(i,lin+1,j) = temp END DO END DO END IF END DO innerm END DO outerm !tgs add IF IF ( flag_soilm000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sm_input(i,1,j) = sm_input(i,2,j) sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j) END DO END DO ENDIF ! Sort the levels for liquid moisture. outerw: DO lout = 1 , num_sw_levels_input-1 innerw : DO lin = lout+1 , num_sw_levels_input IF ( sw_levels_input(lout) .GT. sw_levels_input(lin) ) THEN temp = sw_levels_input(lout) sw_levels_input(lout) = sw_levels_input(lin) sw_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sw_input(i,lout+1,j) sw_input(i,lout+1,j) = sw_input(i,lin+1,j) sw_input(i,lin+1,j) = temp END DO END DO END IF END DO innerw END DO outerw IF ( num_sw_levels_input .GT. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sw_input(i,1,j) = sw_input(i,2,j) sw_input(i,num_sw_levels_input+2,j) = sw_input(i,num_sw_levels_input+1,j) END DO END DO END IF found_levels = .TRUE. ELSE IF ( ( num .LE. 0 ) .AND. ( start_date .NE. current_date ) ) THEN found_levels = .FALSE. ELSE CALL wrf_error_fatal ( & 'No input soil level data (temperature, moisture or liquid, or all are missing). Required for LSM.' ) END IF ! Is it OK to continue? IF ( found_levels ) THEN !tgs: Here are the levels that we have from the input for temperature. IF ( flag_soilt000 .EQ. 1 ) THEN DO l = 1 , num_st_levels_input zhave(l) = st_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt : DO lwant = 1 , num_soil_layers z_havet : DO lhave = 1 , num_st_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet END IF END DO z_havet END DO z_wantt ELSE ! Here are the levels that we have from the input for temperature. The input levels plus ! two more: the skin temperature at 0 cm, and the annual mean temperature at 300 cm. zhave(1) = 0. DO l = 1 , num_st_levels_input zhave(l+1) = st_levels_input(l) / 100. END DO zhave(num_st_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt_2: DO lwant = 1 , num_soil_layers z_havet_2 : DO lhave = 1 , num_st_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet_2 END IF END DO z_havet_2 END DO z_wantt_2 END IF !tgs: IF ( flag_soilm000 .EQ. 1 ) THEN DO l = 1 , num_sm_levels_input zhave(l) = sm_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantm : DO lwant = 1 , num_soil_layers z_havem : DO lhave = 1 , num_sm_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem END IF END DO z_havem END DO z_wantm ELSE ! Here are the levels that we have from the input for moisture. The input levels plus ! two more: a value at 0 cm and one at 300 cm. The 0 cm value is taken to be identical ! to the most shallow layer's value. Similarly, the 300 cm value is taken to be the same ! as the most deep layer's value. zhave(1) = 0. DO l = 1 , num_sm_levels_input zhave(l+1) = sm_levels_input(l) / 100. END DO zhave(num_sm_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantm_2 : DO lwant = 1 , num_soil_layers z_havem_2 : DO lhave = 1 , num_sm_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem_2 END IF END DO z_havem_2 END DO z_wantm_2 ENDIF ! Any liquid soil moisture to worry about? IF ( num_sw_levels_input .GT. 1 ) THEN zhave(1) = 0. DO l = 1 , num_sw_levels_input zhave(l+1) = sw_levels_input(l) / 100. END DO zhave(num_sw_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantw : DO lwant = 1 , num_soil_layers z_havew : DO lhave = 1 , num_sw_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sh2o(i,lwant,j)= ( sw_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & sw_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havew END IF END DO z_havew END DO z_wantw END IF ! Over water, put in reasonable values for soil temperature and moisture. These won't be ! used, but they will make a more continuous plot. IF ( flag_sst .EQ. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= sst(i,j) smois(i,l,j)= 1.0 sh2o (i,l,j)= 1.0 END DO END IF END DO END DO ELSE DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= tsk(i,j) smois(i,l,j)= 1.0 sh2o (i,l,j)= 1.0 END DO END IF END DO END DO END IF DEALLOCATE (zhave) END IF END SUBROUTINE init_soil_2_real SUBROUTINE init_soil_2_ideal ( xland,xice,vegfra,snow,canwat, & ivgtyp,isltyp,tslb,smois,tmn, & num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte INTEGER, INTENT(IN) ::num_soil_layers REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(OUT) :: smois, tslb REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: xland, snow, canwat, xice, vegfra, tmn INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp INTEGER :: icm,jcm,itf,jtf INTEGER :: i,j,l itf=min0(ite,ide-1) jtf=min0(jte,jde-1) icm = ide/2 jcm = jde/2 DO j=jts,jtf DO l=1,num_soil_layers DO i=its,itf if (xland(i,j) .lt. 1.5) then smois(i,1,j)=0.30 smois(i,2,j)=0.30 smois(i,3,j)=0.30 smois(i,4,j)=0.30 tslb(i,1,j)=290. tslb(i,2,j)=290. tslb(i,3,j)=290. tslb(i,4,j)=290. endif ENDDO ENDDO ENDDO END SUBROUTINE init_soil_2_ideal SUBROUTINE init_soil_3_real ( tsk , tmn , smois , tslb , & st_input , sm_input , landmask, sst, & zs , dzs , & st_levels_input , sm_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: num_soil_layers , & num_st_levels_input , num_sm_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000 INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk REAL , DIMENSION(num_soil_layers) :: zs , dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois REAL , ALLOCATABLE , DIMENSION(:) :: zhave INTEGER :: i , j , l , lout , lin , lwant , lhave, k REAL :: temp CHARACTER (LEN=132) :: message ! Allocate the soil layer array used for interpolating. IF ( ( num_st_levels_input .LE. 0 ) .OR. & ( num_sm_levels_input .LE. 0 ) ) THEN write (message, FMT='(A)')& 'No input soil level data (either temperature or moisture, or both are missing). Required for RUC LSM.' CALL wrf_error_fatal ( message ) ELSE IF ( flag_soilt000 .eq. 1 ) THEN write(message, FMT='(A)') ' Assume RUC LSM 6-level input' CALL wrf_message ( message ) ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input) ) ) ELSE write(message, FMT='(A)') ' Assume non-RUC LSM input' CALL wrf_message ( message ) ALLOCATE ( zhave( MAX(num_st_levels_input,num_soil_layers) ) ) END IF END IF ! Sort the levels for temperature. outert : DO lout = 1 , num_st_levels_input-1 innert : DO lin = lout+1 , num_st_levels_input IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN temp = st_levels_input(lout) st_levels_input(lout) = st_levels_input(lin) st_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = st_input(i,lout,j) st_input(i,lout,j) = st_input(i,lin,j) st_input(i,lin,j) = temp END DO END DO END IF END DO innert END DO outert IF ( flag_soilt000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) st_input(i,1,j) = tsk(i,j) st_input(i,num_st_levels_input+2,j) = tmn(i,j) END DO END DO END IF ! Sort the levels for moisture. outerm: DO lout = 1 , num_sm_levels_input-1 innerm : DO lin = lout+1 , num_sm_levels_input IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN temp = sm_levels_input(lout) sm_levels_input(lout) = sm_levels_input(lin) sm_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sm_input(i,lout,j) sm_input(i,lout,j) = sm_input(i,lin,j) sm_input(i,lin,j) = temp END DO END DO END IF END DO innerm END DO outerm IF ( flag_soilm000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sm_input(i,1,j) = (sm_input(i,2,j)-sm_input(i,3,j))/ & (st_levels_input(2)-st_levels_input(1))*st_levels_input(1)+ & sm_input(i,2,j) ! sm_input(i,1,j) = sm_input(i,2,j) sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j) END DO END DO END IF ! Here are the levels that we have from the input for temperature. IF ( flag_soilt000 .EQ. 1 ) THEN DO l = 1 , num_st_levels_input zhave(l) = st_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt : DO lwant = 1 , num_soil_layers z_havet : DO lhave = 1 , num_st_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet END IF END DO z_havet END DO z_wantt ELSE zhave(1) = 0. DO l = 1 , num_st_levels_input zhave(l+1) = st_levels_input(l) / 100. END DO zhave(num_st_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt_2 : DO lwant = 1 , num_soil_layers z_havet_2 : DO lhave = 1 , num_st_levels_input +2 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet_2 END IF END DO z_havet_2 END DO z_wantt_2 END IF ! Here are the levels that we have from the input for moisture. IF ( flag_soilm000 .EQ. 1 ) THEN DO l = 1 , num_sm_levels_input zhave(l) = sm_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantm : DO lwant = 1 , num_soil_layers z_havem : DO lhave = 1 , num_sm_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem END IF END DO z_havem END DO z_wantm ELSE zhave(1) = 0. DO l = 1 , num_sm_levels_input zhave(l+1) = sm_levels_input(l) / 100. END DO zhave(num_sm_levels_input+2) = 300. / 100. z_wantm_2 : DO lwant = 1 , num_soil_layers z_havem_2 : DO lhave = 1 , num_sm_levels_input +2 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem_2 END IF END DO z_havem_2 END DO z_wantm_2 END IF ! Over water, put in reasonable values for soil temperature and moisture. These won't be ! used, but they will make a more continuous plot. IF ( flag_sst .EQ. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j) = sst(i,j) tsk(i,j) = sst(i,j) smois(i,l,j)= 1.0 END DO END IF END DO END DO ELSE DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= tsk(i,j) smois(i,l,j)= 1.0 END DO END IF END DO END DO END IF DEALLOCATE (zhave) END SUBROUTINE init_soil_3_real SUBROUTINE init_soil_7_real ( tsk , tmn , smois , sh2o , tslb , & st_input , sm_input , sw_input , landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , sw_levels_input , & num_soil_layers , num_st_levels_input , & num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , & num_sw_levels_alloc , & flag_sst , flag_soilt000 , flag_soilmt000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) ! for soil temperature and moisture initialization for the PX LSM IMPLICIT NONE INTEGER , INTENT(IN) :: num_soil_layers , & num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilmt000 INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk REAL , DIMENSION(num_soil_layers) :: zs , dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o REAL , ALLOCATABLE , DIMENSION(:) :: zhave INTEGER :: i , j , l , lout , lin , lwant , lhave , num REAL :: temp LOGICAL :: found_levels ! Are there any soil temp and moisture levels - ya know, they are mandatory. num = num_st_levels_input * num_sm_levels_input IF ( num .GE. 1 ) THEN ! Ordered levels that we have data for. ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) +2) ) ! Sort the levels for temperature. outert : DO lout = 1 , num_st_levels_input-1 innert : DO lin = lout+1 , num_st_levels_input IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN temp = st_levels_input(lout) st_levels_input(lout) = st_levels_input(lin) st_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = st_input(i,lout+1,j) st_input(i,lout+1,j) = st_input(i,lin+1,j) st_input(i,lin+1,j) = temp END DO END DO END IF END DO innert END DO outert DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) st_input(i,1,j) = tsk(i,j) st_input(i,num_st_levels_input+2,j) = tmn(i,j) END DO END DO ! Sort the levels for moisture. outerm: DO lout = 1 , num_sm_levels_input-1 innerm : DO lin = lout+1 , num_sm_levels_input IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN temp = sm_levels_input(lout) sm_levels_input(lout) = sm_levels_input(lin) sm_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sm_input(i,lout+1,j) sm_input(i,lout+1,j) = sm_input(i,lin+1,j) sm_input(i,lin+1,j) = temp END DO END DO END IF END DO innerm END DO outerm DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sm_input(i,1,j) = sm_input(i,2,j) sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j) END DO END DO ! Sort the levels for liquid moisture. outerw: DO lout = 1 , num_sw_levels_input-1 innerw : DO lin = lout+1 , num_sw_levels_input IF ( sw_levels_input(lout) .GT. sw_levels_input(lin) ) THEN temp = sw_levels_input(lout) sw_levels_input(lout) = sw_levels_input(lin) sw_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sw_input(i,lout+1,j) sw_input(i,lout+1,j) = sw_input(i,lin+1,j) sw_input(i,lin+1,j) = temp END DO END DO END IF END DO innerw END DO outerw IF ( num_sw_levels_input .GT. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sw_input(i,1,j) = sw_input(i,2,j) sw_input(i,num_sw_levels_input+2,j) = sw_input(i,num_sw_levels_input+1,j) END DO END DO END IF found_levels = .TRUE. ELSE IF ( ( num .LE. 0 ) .AND. ( start_date .NE. current_date ) ) THEN found_levels = .FALSE. ELSE CALL wrf_error_fatal ( & 'No input soil level data (temperature, moisture or liquid, or all are missing). Required for PX LSM.' ) END IF ! Is it OK to continue? IF ( found_levels ) THEN ! Here are the levels that we have from the input for temperature. The input levels plus ! two more: the skin temperature at 0 cm, and the annual mean temperature at 300 cm. zhave(1) = 0. DO l = 1 , num_st_levels_input zhave(l+1) = st_levels_input(l) / 100. END DO zhave(num_st_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt : DO lwant = 1 , num_soil_layers z_havet : DO lhave = 1 , num_st_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet END IF END DO z_havet END DO z_wantt ! Here are the levels that we have from the input for moisture. The input levels plus ! two more: a value at 0 cm and one at 300 cm. The 0 cm value is taken to be identical ! to the most shallow layer's value. Similarly, the 300 cm value is taken to be the same ! as the most deep layer's value. zhave(1) = 0. DO l = 1 , num_sm_levels_input zhave(l+1) = sm_levels_input(l) / 100. END DO zhave(num_sm_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantm : DO lwant = 1 , num_soil_layers z_havem : DO lhave = 1 , num_sm_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem END IF END DO z_havem END DO z_wantm ! Any liquid soil moisture to worry about? IF ( num_sw_levels_input .GT. 1 ) THEN zhave(1) = 0. DO l = 1 , num_sw_levels_input zhave(l+1) = sw_levels_input(l) / 100. END DO zhave(num_sw_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantw : DO lwant = 1 , num_soil_layers z_havew : DO lhave = 1 , num_sw_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sh2o(i,lwant,j)= ( sw_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & sw_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havew END IF END DO z_havew END DO z_wantw END IF ! Over water, put in reasonable values for soil temperature and moisture. These won't be ! used, but they will make a more continuous plot. DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,1,j)= tsk(i,j) tslb(i,2,j)= tmn(i,j) END DO END DO IF ( flag_sst .EQ. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= sst(i,j) smois(i,l,j)= 1.0 sh2o (i,l,j)= 1.0 END DO END IF END DO END DO ELSE DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= tsk(i,j) smois(i,l,j)= 1.0 sh2o (i,l,j)= 1.0 END DO END IF END DO END DO END IF DEALLOCATE (zhave) END IF END SUBROUTINE init_soil_7_real END MODULE module_soil_pre #else MODULE module_soil_pre USE module_date_time USE module_state_description CONTAINS SUBROUTINE adjust_for_seaice_pre ( xice , landmask , tsk , ivgtyp , vegcat , lu_index , & xland , landusef , isltyp , soilcat , soilctop , & soilcbot , tmn , & seaice_threshold , & num_veg_cat , num_soil_top_cat , num_soil_bot_cat , & iswater , isice , & scheme , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater , isice INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , & vegcat, xland , soilcat , tmn REAL , INTENT(IN) :: seaice_threshold INTEGER :: i , j , num_seaice_changes , loop CHARACTER (LEN=132) :: message fix_seaice : SELECT CASE ( scheme ) CASE ( SLABSCHEME ) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( xice(i,j) .GT. 200.0 ) THEN xice(i,j) = 0. num_seaice_changes = num_seaice_changes + 1 END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total pre number of sea ice locations removed (due to FLAG values) = ', & num_seaice_changes CALL wrf_debug ( 0 , message ) END IF num_seaice_changes = 0 DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( ( xice(i,j) .GE. 0.5 ) .OR. & ( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN xice(i,j) = 1. num_seaice_changes = num_seaice_changes + 1 tmn(i,j) = 271.4 vegcat(i,j)=isice lu_index(i,j)=ivgtyp(i,j) landmask(i,j)=1. xland(i,j)=1. DO loop=1,num_veg_cat landusef(i,loop,j)=0. END DO landusef(i,ivgtyp(i,j),j)=1. isltyp(i,j) = 16 soilcat(i,j)=isltyp(i,j) DO loop=1,num_soil_top_cat soilctop(i,loop,j)=0 END DO DO loop=1,num_soil_bot_cat soilcbot(i,loop,j)=0 END DO soilctop(i,isltyp(i,j),j)=1. soilcbot(i,isltyp(i,j),j)=1. END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total pre number of sea ice location changes (water to land) = ', num_seaice_changes CALL wrf_debug ( 0 , message ) END IF CASE ( LSMSCHEME ) CASE ( RUCLSMSCHEME ) END SELECT fix_seaice END SUBROUTINE adjust_for_seaice_pre SUBROUTINE adjust_for_seaice_post ( xice , landmask , tsk , ivgtyp , vegcat , lu_index , & xland , landusef , isltyp , soilcat , soilctop , & soilcbot , tmn , & tslb , smois , sh2o , & seaice_threshold , & num_veg_cat , num_soil_top_cat , num_soil_bot_cat , & num_soil_layers , & iswater , isice , & scheme , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater , isice INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme INTEGER , INTENT(IN) :: num_soil_layers REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot REAL , DIMENSION(ims:ime,1:num_soil_layers,jms:jme) , INTENT(INOUT):: tslb , smois , sh2o INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , & vegcat, xland , soilcat , tmn REAL , INTENT(IN) :: seaice_threshold REAL :: total_depth , mid_point_depth INTEGER :: i , j , num_seaice_changes , loop CHARACTER (LEN=132) :: message fix_seaice : SELECT CASE ( scheme ) CASE ( SLABSCHEME ) CASE ( LSMSCHEME ) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( xice(i,j) .GT. 200.0 ) THEN xice(i,j) = 0. num_seaice_changes = num_seaice_changes + 1 END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total post number of sea ice locations removed (due to FLAG values) = ', & num_seaice_changes CALL wrf_debug ( 0 , message ) END IF num_seaice_changes = 0 DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( ( xice(i,j) .GE. 0.5 ) .OR. & ( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN xice(i,j) = 1. num_seaice_changes = num_seaice_changes + 1 tmn(i,j) = 271.16 vegcat(i,j)=isice lu_index(i,j)=ivgtyp(i,j) landmask(i,j)=1. xland(i,j)=1. DO loop=1,num_veg_cat landusef(i,loop,j)=0. END DO landusef(i,ivgtyp(i,j),j)=1. isltyp(i,j) = 16 soilcat(i,j)=isltyp(i,j) DO loop=1,num_soil_top_cat soilctop(i,loop,j)=0 END DO DO loop=1,num_soil_bot_cat soilcbot(i,loop,j)=0 END DO soilctop(i,isltyp(i,j),j)=1. soilcbot(i,isltyp(i,j),j)=1. total_depth = 3. ! ice is 3 m deep, num_soil_layers equispaced layers DO loop = 1,num_soil_layers mid_point_depth=(total_depth/num_soil_layers)/2. + & (loop-1)*(total_depth/num_soil_layers) tslb(i,loop,j) = ( (total_depth-mid_point_depth)*tsk(i,j) + & mid_point_depth*tmn(i,j) ) / total_depth END DO DO loop=1,num_soil_layers smois(i,loop,j) = 1.0 sh2o(i,loop,j) = 0.0 END DO END IF END DO END DO IF ( num_seaice_changes .GT. 0 ) THEN WRITE ( message , FMT='(A,I6)' ) & 'Total post number of sea ice location changes (water to land) = ', num_seaice_changes CALL wrf_debug ( 0 , message ) END IF CASE ( RUCLSMSCHEME ) END SELECT fix_seaice END SUBROUTINE adjust_for_seaice_post SUBROUTINE process_percent_cat_new ( landmask , & landuse_frac , soil_top_cat , soil_bot_cat , & isltyp , ivgtyp , & num_veg_cat , num_soil_top_cat , num_soil_bot_cat , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & iswater INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landuse_frac REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(IN):: soil_top_cat REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(IN):: soil_bot_cat INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask INTEGER :: i , j , l , ll, dominant_index REAL :: dominant_value #ifdef WRF_CHEM ! REAL :: lwthresh = .99 REAL :: lwthresh = .50 #else REAL :: lwthresh = .50 #endif INTEGER , PARAMETER :: iswater_soil = 14 INTEGER :: iforce CHARACTER (LEN=1024) :: message ! Sanity check on the 50/50 points DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) dominant_value = landuse_frac(i,iswater,j) IF ( dominant_value .EQ. lwthresh ) THEN DO l = 1 , num_veg_cat IF ( l .EQ. iswater ) CYCLE IF ( landuse_frac(i,l,j) .EQ. lwthresh ) THEN write(message, FMT='(I4,I4,A,I4,A,F12.4)') i,j,' water and category ',l,' both at 50%, landmask is ',landmask(i,j) call wrf_message ( message ) landuse_frac(i,l,j) = lwthresh - .01 landuse_frac(i,iswater,j) = 1. - (lwthresh + 0.01) END IF END DO END IF END DO END DO ! Compute the dominant VEGETATION INDEX. DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) dominant_value = landuse_frac(i,1,j) dominant_index = 1 DO l = 2 , num_veg_cat IF ( l .EQ. iswater ) THEN ! wait a bit ELSE IF ( ( l .NE. iswater ) .AND. ( landuse_frac(i,l,j) .GT. dominant_value ) ) THEN dominant_value = landuse_frac(i,l,j) dominant_index = l END IF END DO IF ( landuse_frac(i,iswater,j) .GT. lwthresh ) THEN dominant_value = landuse_frac(i,iswater,j) dominant_index = iswater #if 0 si needs to beef up consistency checks before we can use this part ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh) .AND. & ( dominant_value .EQ. lwthresh) ) THEN ! no op #else ELSEIF((landuse_frac(i,iswater,j).EQ.lwthresh).AND.(dominant_value.EQ.lwthresh).and.(dominant_index.LT.iswater))THEN write(message,*)'temporary SI landmask fix' call wrf_message(trim(message)) ! no op ELSEIF((landuse_frac(i,iswater,j).EQ.lwthresh).AND.(dominant_value.EQ.lwthresh).and.(dominant_index.GT.iswater))THEN write(message,*)'temporary SI landmask fix' call wrf_message(trim(message)) dominant_value = landuse_frac(i,iswater,j) dominant_index = iswater #endif ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh ) .AND. & ( dominant_value .LT. lwthresh ) ) THEN dominant_value = landuse_frac(i,iswater,j) dominant_index = iswater END IF IF ( dominant_index .EQ. iswater ) THEN if(landmask(i,j).gt.lwthresh) then write(message,*) 'changing to water at point ',i,j call wrf_message(trim(message)) write(message,*) nint(landuse_frac(i,:,j)*100) call wrf_message(trim(message)) endif landmask(i,j) = 0 ELSE IF ( dominant_index .NE. iswater ) THEN if(landmask(i,j).lt.lwthresh) then write(message,*) 'changing to land at point ',i,j call wrf_message(trim(message)) write(message,*) nint(landuse_frac(i,:,j)*100) call wrf_message(trim(message)) endif landmask(i,j) = 1 END IF ivgtyp(i,j) = dominant_index END DO END DO ! Compute the dominant SOIL TEXTURE INDEX, TOP. iforce = 0 DO i = its , MIN(ide-1,ite) DO j = jts , MIN(jde-1,jte) dominant_value = soil_top_cat(i,1,j) dominant_index = 1 IF ( landmask(i,j) .GT. lwthresh ) THEN DO l = 2 , num_soil_top_cat IF ( ( l .NE. iswater_soil ) .AND. ( soil_top_cat(i,l,j) .GT. dominant_value ) ) THEN dominant_value = soil_top_cat(i,l,j) dominant_index = l END IF END DO IF ( dominant_value .LT. 0.01 ) THEN iforce = iforce + 1 WRITE ( message , FMT = '(A,I4,I4)' ) & 'based on landuse, changing soil to land at point ',i,j CALL wrf_debug(1,message) WRITE ( message , FMT = '(16(i3,1x))' ) & 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16 CALL wrf_debug(1,message) WRITE ( message , FMT = '(16(i3,1x))' ) & nint(soil_top_cat(i,:,j)*100) CALL wrf_debug(1,message) dominant_index = 8 END IF ELSE dominant_index = iswater_soil END IF isltyp(i,j) = dominant_index END DO END DO if(iforce.ne.0)then WRITE(message,FMT='(A,I4,A,I6)' ) & 'forcing artificial silty clay loam at ',iforce,' points, out of ',& (MIN(ide-1,ite)-its+1)*(MIN(jde-1,jte)-jts+1) CALL wrf_debug(0,message) endif END SUBROUTINE process_percent_cat_new SUBROUTINE process_soil_real ( tsk , tmn , & landmask , sst , & st_input , sm_input , sw_input , st_levels_input , sm_levels_input , sw_levels_input , & zs , dzs , tslb , smois , sh2o , & flag_sst , flag_soilt000, flag_soilm000, & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & sf_surface_physics , num_soil_layers , real_data_init_type , & num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & sf_surface_physics , num_soil_layers , real_data_init_type , & num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000 REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk INTEGER :: i , j , l , dominant_index , num_soil_cat , num_veg_cat REAL :: dominant_value ! Initialize the soil depth, and the soil temperature and moisture. IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_1 ( zs , dzs , num_soil_layers ) CALL init_soil_1_real ( tsk , tmn , tslb , zs , dzs , num_soil_layers , real_data_init_type , & landmask , sst , flag_sst , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) ELSE IF ( ( sf_surface_physics .EQ. 2 .or. sf_surface_physics .EQ. 99 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_2 ( zs , dzs , num_soil_layers ) CALL init_soil_2_real ( tsk , tmn , smois , sh2o , tslb , & st_input , sm_input , sw_input , landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , sw_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) ! CALL init_soil_old ( tsk , tmn , & ! smois , tslb , zs , dzs , num_soil_layers , & ! st000010_input , st010040_input , st040100_input , st100200_input , & ! st010200_input , & ! sm000010_input , sm010040_input , sm040100_input , sm100200_input , & ! sm010200_input , & ! landmask_input , sst_input , & ! ids , ide , jds , jde , kds , kde , & ! ims , ime , jms , jme , kms , kme , & ! its , ite , jts , jte , kts , kte ) ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_3 ( zs , dzs , num_soil_layers ) CALL init_soil_3_real ( tsk , tmn , smois , tslb , & st_input , sm_input , landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) END IF END SUBROUTINE process_soil_real SUBROUTINE process_soil_ideal ( xland,xice,vegfra,snow,canwat, & ivgtyp,isltyp,tslb,smois, & tsk,tmn,zs,dzs, & num_soil_layers, & sf_surface_physics , & ids,ide, jds,jde, kds,kde,& ims,ime, jms,jme, kms,kme,& its,ite, jts,jte, kts,kte ) IMPLICIT NONE INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte INTEGER, INTENT(IN) :: num_soil_layers , sf_surface_physics REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(INOUT) :: smois, tslb REAL, DIMENSION(num_soil_layers), INTENT(OUT) :: dzs,zs REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(INOUT) :: tsk, tmn REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: xland, snow, canwat, xice, vegfra INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp ! Local variables. INTEGER :: itf,jtf itf=MIN(ite,ide-1) jtf=MIN(jte,jde-1) IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_1 ( zs , dzs , num_soil_layers ) CALL init_soil_1_ideal(tsk,tmn,tslb,xland, & ivgtyp,zs,dzs,num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) ELSE IF ( ( sf_surface_physics .EQ. 2 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_2 ( zs , dzs , num_soil_layers ) CALL init_soil_2_ideal ( xland,xice,vegfra,snow,canwat, & ivgtyp,isltyp,tslb,smois,tmn, & num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN CALL init_soil_depth_3 ( zs , dzs , num_soil_layers ) END IF END SUBROUTINE process_soil_ideal SUBROUTINE adjust_soil_temp_new ( tmn , sf_surface_physics , & tsk , ter , toposoil , landmask , flag_toposoil , & st000010 , st010040 , st040100 , st100200 , st010200 , & flag_st000010 , flag_st010040 , flag_st040100 , flag_st100200 , flag_st010200 , & soilt000 , soilt005 , soilt020 , soilt040 , soilt160 , soilt300 , & flag_soilt000 , flag_soilt005 , flag_soilt020 , flag_soilt040 , flag_soilt160 , flag_soilt300 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: ter , toposoil , landmask REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tmn , tsk REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: st000010 , st010040 , st040100 , st100200 , st010200 REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: soilt000 , soilt005 , soilt020 , soilt040 , soilt160 , soilt300 INTEGER , INTENT(IN) :: flag_st000010 , flag_st010040 , flag_st040100 , flag_st100200 , flag_st010200 INTEGER , INTENT(IN) :: flag_soilt000 , flag_soilt005 , flag_soilt020 , flag_soilt040 , flag_soilt160 , flag_soilt300 INTEGER , INTENT(IN) :: sf_surface_physics , flag_toposoil INTEGER :: i , j REAL :: soil_elev_min_val , soil_elev_max_val , soil_elev_min_dif , soil_elev_max_dif ! Do we have a soil field with which to modify soil temperatures? IF ( flag_toposoil .EQ. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) ! Is the toposoil field OK, or is it a subversive soil elevation field. We can tell ! usually by looking at values. Anything less than -1000 m (lower than the Dead Sea) is ! bad. Anything larger than 10 km (taller than Everest) is toast. Also, anything where ! the difference between the soil elevation and the terrain is greater than 3 km means ! that the soil data is either all zeros or that the data are inconsistent. Any of these ! three conditions is grievous enough to induce a WRF fatality. However, if they are at ! a water point, then we can safely ignore them. soil_elev_min_val = toposoil(i,j) soil_elev_max_val = toposoil(i,j) soil_elev_min_dif = ter(i,j) - toposoil(i,j) soil_elev_max_dif = ter(i,j) - toposoil(i,j) IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN CYCLE ELSE IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN !print *,'no soil temperature elevation adjustment, soil height too small = ',toposoil(i,j) cycle ! CALL wrf_error_fatal ( 'TOPOSOIL values have large negative values < -1000 m, unrealistic.' ) ENDIF IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN CYCLE ELSE IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN print *,'no soil temperature elevation adjustment, soil height too high = ',toposoil(i,j) cycle CALL wrf_error_fatal ( 'TOPOSOIL values have large positive values > 10,000 m , unrealistic.' ) ENDIF IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. & ( landmask(i,j) .LT. 0.5 ) ) THEN CYCLE ELSE IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. & ( landmask(i,j) .GT. 0.5 ) ) THEN print *,'no soil temperature elevation adjustment, diff of soil height and terrain = ',ter(i,j) - toposoil(i,j) cycle CALL wrf_error_fatal ( 'TOPOSOIL difference with terrain elevation differs by more than 3000 m, unrealistic' ) ENDIF ! For each of the fields that we would like to modify, check to see if it came in from the SI. ! If so, then use a -6.5 K/km lapse rate (based on the elevation diffs). We only adjust when we ! are not at a water point. IF (landmask(i,j) .GT. 0.5 ) THEN IF ( sf_surface_physics .EQ. 1 .OR. sf_surface_physics .EQ. 7) THEN tmn(i,j) = tmn(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF tsk(i,j) = tsk(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) IF ( flag_st000010 .EQ. 1 ) THEN st000010(i,j) = st000010(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st010040 .EQ. 1 ) THEN st010040(i,j) = st010040(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st040100 .EQ. 1 ) THEN st040100(i,j) = st040100(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st100200 .EQ. 1 ) THEN st100200(i,j) = st100200(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_st010200 .EQ. 1 ) THEN st010200(i,j) = st010200(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt000 .EQ. 1 ) THEN soilt000(i,j) = soilt000(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt005 .EQ. 1 ) THEN soilt005(i,j) = soilt005(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt020 .EQ. 1 ) THEN soilt020(i,j) = soilt020(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt040 .EQ. 1 ) THEN soilt040(i,j) = soilt040(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt160 .EQ. 1 ) THEN soilt160(i,j) = soilt160(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF IF ( flag_soilt300 .EQ. 1 ) THEN soilt300(i,j) = soilt300(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) ) END IF END IF END DO END DO END IF END SUBROUTINE adjust_soil_temp_new SUBROUTINE init_soil_depth_1 ( zs , dzs , num_soil_layers ) IMPLICIT NONE INTEGER, INTENT(IN) :: num_soil_layers REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs INTEGER :: l CHARACTER (LEN=132) :: message ! Define layers (top layer = 0.01 m). Double the thicknesses at each step (dzs values). ! The distance from the ground level to the midpoint of the layer is given by zs. ! ------- Ground Level ---------- || || || || ! || || || || zs(1) = 0.005 m ! -- -- -- -- -- -- -- -- -- || || || \/ ! || || || ! ----------------------------------- || || || \/ dzs(1) = 0.01 m ! || || || ! || || || zs(2) = 0.02 ! -- -- -- -- -- -- -- -- -- || || \/ ! || || ! || || ! ----------------------------------- || || \/ dzs(2) = 0.02 m ! || || ! || || ! || || ! || || zs(3) = 0.05 ! -- -- -- -- -- -- -- -- -- || \/ ! || ! || ! || ! || ! ----------------------------------- \/ dzs(3) = 0.04 m IF ( num_soil_layers .NE. 5 ) THEN write(message,FMT= '(A)') 'Usually, the 5-layer diffusion uses 5 layers. Change this in the namelist.' CALL wrf_error_fatal ( message ) END IF dzs(1)=.01 zs(1)=.5*dzs(1) DO l=2,num_soil_layers dzs(l)=2*dzs(l-1) zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l) ENDDO END SUBROUTINE init_soil_depth_1 SUBROUTINE init_soil_depth_2 ( zs , dzs , num_soil_layers ) IMPLICIT NONE INTEGER, INTENT(IN) :: num_soil_layers REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs INTEGER :: l CHARACTER (LEN=132) :: message dzs = (/ 0.1 , 0.3 , 0.6 , 1.0 /) IF ( num_soil_layers .NE. 4 ) THEN write(message,FMT='(A)') 'Usually, the LSM uses 4 layers. Change this in the namelist.' CALL wrf_error_fatal ( message ) END IF zs(1)=.5*dzs(1) DO l=2,num_soil_layers zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l) ENDDO END SUBROUTINE init_soil_depth_2 SUBROUTINE init_soil_depth_3 ( zs , dzs , num_soil_layers ) IMPLICIT NONE INTEGER, INTENT(IN) :: num_soil_layers REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs INTEGER :: l CHARACTER (LEN=132) :: message ! in RUC LSM ZS - soil levels, and DZS - soil layer thicknesses, not used ! ZS is specified in the namelist: num_soil_layers = 6 or 9. ! Other options with number of levels are possible, but ! WRF users should change consistently the namelist entry with the ! ZS array in this subroutine. IF ( num_soil_layers .EQ. 6) THEN zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 1.60 , 3.00 /) ! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /) ELSEIF ( num_soil_layers .EQ. 9) THEN zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 0.60, 1.00, 1.60 , 2.20, 3.00 /) ! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /) ENDIF IF ( num_soil_layers .EQ. 4 .OR. num_soil_layers .EQ. 5 ) THEN WRITE(message,FMT= '(A)')'Usually, the RUC LSM uses 6, 9 or more levels. Change this in the namelist.' CALL wrf_error_fatal ( message ) END IF END SUBROUTINE init_soil_depth_3 SUBROUTINE init_soil_1_real ( tsk , tmn , tslb , zs , dzs , & num_soil_layers , real_data_init_type , & landmask , sst , flag_sst , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: num_soil_layers , real_data_init_type , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte INTEGER , INTENT(IN) :: flag_sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tsk , tmn REAL , DIMENSION(num_soil_layers) :: zs , dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb INTEGER :: i , j , l ! Soil temperature is linearly interpolated between the skin temperature (taken to be at a ! depth of 0.5 cm) and the deep soil, annual temperature (taken to be at a depth of 23 cm). ! The tslb(i,1,j) is the skin temperature, and the tslb(i,num_soil_layers,j) level is the ! annual mean temperature. DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .GT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= ( tsk(i,j) * ( zs(num_soil_layers) - zs(l) ) + & tmn(i,j) * ( zs( l) - zs(1) ) ) / & ( zs(num_soil_layers) - zs(1) ) END DO ELSE IF ( ( real_data_init_type .EQ. 1 ) .AND. ( flag_sst .EQ. 1 ) ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= sst(i,j) END DO ELSE DO l = 1 , num_soil_layers tslb(i,l,j)= tsk(i,j) END DO END IF END IF END DO END DO END SUBROUTINE init_soil_1_real SUBROUTINE init_soil_1_ideal(tsk,tmn,tslb,xland, & ivgtyp,ZS,DZS,num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE INTEGER, INTENT(IN ) :: ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte INTEGER, INTENT(IN ) :: num_soil_layers REAL, DIMENSION( ims:ime , 1 , jms:jme ), INTENT(OUT) :: tslb REAL, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: xland INTEGER, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: ivgtyp REAL, DIMENSION(1:), INTENT(IN) :: dzs,zs REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(IN) :: tsk, tmn ! Lcal variables. INTEGER :: l,j,i,itf,jtf itf=MIN(ite,ide-1) jtf=MIN(jte,jde-1) IF (num_soil_layers.NE.1)THEN DO j=jts,jtf DO l=1,num_soil_layers DO i=its,itf tslb(i,l,j)=( tsk(i,j)*(zs(num_soil_layers)-zs(l)) + tmn(i,j)*(zs(l)-zs(1)) ) / & ( zs(num_soil_layers)-zs(1) ) ENDDO ENDDO ENDDO ENDIF DO j=jts,jtf DO i=its,itf xland(i,j) = 2 ivgtyp(i,j) = 7 ENDDO ENDDO END SUBROUTINE init_soil_1_ideal SUBROUTINE init_soil_2_real ( tsk , tmn , smois , sh2o , tslb , & st_input , sm_input , sw_input , landmask , sst , & zs , dzs , & st_levels_input , sm_levels_input , sw_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: num_soil_layers , & num_st_levels_input , num_sm_levels_input , num_sw_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000 INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk REAL , DIMENSION(num_soil_layers) :: zs , dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o REAL , ALLOCATABLE , DIMENSION(:) :: zhave INTEGER :: i , j , l , lout , lin , lwant , lhave , num REAL :: temp LOGICAL :: found_levels CHARACTER (LEN=132) :: message ! Are there any soil temp and moisture levels - ya know, they are mandatory. num = num_st_levels_input * num_sm_levels_input IF ( num .GE. 1 ) THEN ! Ordered levels that we have data for. IF ( flag_soilt000 .eq. 1 ) THEN write(message, FMT='(A)') ' Assume RUC LSM 6-level input' CALL wrf_message ( message ) ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) ) ) ELSE write(message, FMT='(A)') ' Assume Noah LSM input' CALL wrf_message ( message ) ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) +2) ) END IF ! Sort the levels for temperature. !print*,'num_st_levels_input, st_levels_input', num_st_levels_input, st_levels_input !print*,'num_sm_levels_input,num_sw_levels_input',num_sm_levels_input,num_sw_levels_input outert : DO lout = 1 , num_st_levels_input-1 innert : DO lin = lout+1 , num_st_levels_input IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN temp = st_levels_input(lout) st_levels_input(lout) = st_levels_input(lin) st_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = st_input(i,lout+1,j) st_input(i,lout+1,j) = st_input(i,lin+1,j) st_input(i,lin+1,j) = temp END DO END DO END IF END DO innert END DO outert !tgs add IF IF ( flag_soilt000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) st_input(i,1,j) = tsk(i,j) st_input(i,num_st_levels_input+2,j) = tmn(i,j) END DO END DO ENDIF #if ( NMM_CORE == 1 ) !new ! write(0,*) 'st_input(1) in init_soil_2_real' ! DO J=MIN(jde-1,jte),JTS, -MIN(jde-1,jte)/15 ! write(0,616) (st_input(I,1,J),I=its , MIN(ide-1,ite),MIN(ide-1,ite)/10) ! ENDDO ! write(0,*) 'st_input(2) in init_soil_2_real' ! DO J=MIN(jde-1,jte),JTS, -MIN(jde-1,jte)/15 ! write(0,616) (st_input(I,2,J),I=its , MIN(ide-1,ite),MIN(ide-1,ite)/10) ! ENDDO 616 format(20(f4.0,1x)) #endif ! Sort the levels for moisture. outerm: DO lout = 1 , num_sm_levels_input-1 innerm : DO lin = lout+1 , num_sm_levels_input IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN temp = sm_levels_input(lout) sm_levels_input(lout) = sm_levels_input(lin) sm_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sm_input(i,lout+1,j) sm_input(i,lout+1,j) = sm_input(i,lin+1,j) sm_input(i,lin+1,j) = temp END DO END DO END IF END DO innerm END DO outerm !tgs add IF IF ( flag_soilm000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sm_input(i,1,j) = sm_input(i,2,j) sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j) END DO END DO ENDIF ! Sort the levels for liquid moisture. outerw: DO lout = 1 , num_sw_levels_input-1 innerw : DO lin = lout+1 , num_sw_levels_input IF ( sw_levels_input(lout) .GT. sw_levels_input(lin) ) THEN temp = sw_levels_input(lout) sw_levels_input(lout) = sw_levels_input(lin) sw_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sw_input(i,lout+1,j) sw_input(i,lout+1,j) = sw_input(i,lin+1,j) sw_input(i,lin+1,j) = temp END DO END DO END IF END DO innerw END DO outerw IF ( num_sw_levels_input .GT. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sw_input(i,1,j) = sw_input(i,2,j) sw_input(i,num_sw_levels_input+2,j) = sw_input(i,num_sw_levels_input+1,j) END DO END DO END IF found_levels = .TRUE. ELSE IF ( ( num .LE. 0 ) .AND. ( start_date .NE. current_date ) ) THEN found_levels = .FALSE. ELSE CALL wrf_error_fatal ( & 'No input soil level data (temperature, moisture or liquid, or all are missing). Required for LSM.' ) END IF ! Is it OK to continue? IF ( found_levels ) THEN !tgs add IF IF ( flag_soilt000 .NE.1) THEN !tgs initialize from Noah data ! Here are the levels that we have from the input for temperature. The input levels plus ! two more: the skin temperature at 0 cm, and the annual mean temperature at 300 cm. zhave(1) = 0. DO l = 1 , num_st_levels_input zhave(l+1) = st_levels_input(l) / 100. END DO zhave(num_st_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt : DO lwant = 1 , num_soil_layers z_havet : DO lhave = 1 , num_st_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet END IF END DO z_havet END DO z_wantt ELSE !tgs initialize from RUCLSM data DO l = 1 , num_st_levels_input zhave(l) = st_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt_2 : DO lwant = 1 , num_soil_layers z_havet_2 : DO lhave = 1 , num_st_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet_2 END IF END DO z_havet_2 END DO z_wantt_2 ENDIF IF ( flag_soilm000 .NE. 1 ) THEN !tgs initialize from Noah ! Here are the levels that we have from the input for moisture. The input levels plus ! two more: a value at 0 cm and one at 300 cm. The 0 cm value is taken to be identical ! to the most shallow layer's value. Similarly, the 300 cm value is taken to be the same ! as the most deep layer's value. zhave(1) = 0. DO l = 1 , num_sm_levels_input zhave(l+1) = sm_levels_input(l) / 100. END DO zhave(num_sm_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantm : DO lwant = 1 , num_soil_layers z_havem : DO lhave = 1 , num_sm_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem END IF END DO z_havem END DO z_wantm ELSE !tgs initialize from RUCLSM data DO l = 1 , num_sm_levels_input zhave(l) = sm_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantm_2 : DO lwant = 1 , num_soil_layers z_havem_2 : DO lhave = 1 , num_sm_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem_2 END IF END DO z_havem_2 END DO z_wantm_2 ENDIF ! Any liquid soil moisture to worry about? IF ( num_sw_levels_input .GT. 1 ) THEN zhave(1) = 0. DO l = 1 , num_sw_levels_input zhave(l+1) = sw_levels_input(l) / 100. END DO zhave(num_sw_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantw : DO lwant = 1 , num_soil_layers z_havew : DO lhave = 1 , num_sw_levels_input +2 -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sh2o(i,lwant,j)= ( sw_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + & sw_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havew END IF END DO z_havew END DO z_wantw END IF ! Over water, put in reasonable values for soil temperature and moisture. These won't be ! used, but they will make a more continuous plot. IF ( flag_sst .EQ. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= sst(i,j) !tgs add line for tsk tsk(i,j) = sst(i,j) smois(i,l,j)= 1.0 sh2o (i,l,j)= 1.0 END DO END IF END DO END DO ELSE DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= tsk(i,j) smois(i,l,j)= 1.0 sh2o (i,l,j)= 1.0 END DO END IF END DO END DO END IF DEALLOCATE (zhave) END IF END SUBROUTINE init_soil_2_real SUBROUTINE init_soil_2_ideal ( xland,xice,vegfra,snow,canwat, & ivgtyp,isltyp,tslb,smois,tmn, & num_soil_layers, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte INTEGER, INTENT(IN) ::num_soil_layers REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(OUT) :: smois, tslb REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: xland, snow, canwat, xice, vegfra, tmn INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp INTEGER :: icm,jcm,itf,jtf INTEGER :: i,j,l itf=min0(ite,ide-1) jtf=min0(jte,jde-1) icm = ide/2 jcm = jde/2 DO j=jts,jtf DO l=1,num_soil_layers DO i=its,itf smois(i,1,j)=0.10 smois(i,2,j)=0.10 smois(i,3,j)=0.10 smois(i,4,j)=0.10 tslb(i,1,j)=295. tslb(i,2,j)=297. tslb(i,3,j)=293. tslb(i,4,j)=293. ENDDO ENDDO ENDDO DO j=jts,jtf DO i=its,itf xland(i,j) = 2 tmn(i,j) = 294. xice(i,j) = 0. vegfra(i,j) = 0. snow(i,j) = 0. canwat(i,j) = 0. ivgtyp(i,j) = 7 isltyp(i,j) = 8 ENDDO ENDDO END SUBROUTINE init_soil_2_ideal SUBROUTINE init_soil_3_real ( tsk , tmn , smois , tslb , & st_input , sm_input , landmask, sst, & zs , dzs , & st_levels_input , sm_levels_input , & num_soil_layers , num_st_levels_input , num_sm_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , & flag_sst , flag_soilt000 , flag_soilm000 , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) IMPLICIT NONE INTEGER , INTENT(IN) :: num_soil_layers , & num_st_levels_input , num_sm_levels_input , & num_st_levels_alloc , num_sm_levels_alloc , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000 INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk REAL , DIMENSION(num_soil_layers) :: zs , dzs REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois REAL , ALLOCATABLE , DIMENSION(:) :: zhave INTEGER :: i , j , l , lout , lin , lwant , lhave REAL :: temp ! Allocate the soil layer array used for interpolating. IF ( ( num_st_levels_input .LE. 0 ) .OR. & ( num_sm_levels_input .LE. 0 ) ) THEN PRINT '(A)','No input soil level data (either temperature or moisture, or both are missing). Required for RUC LSM.' CALL wrf_error_fatal ( 'no soil data' ) ELSE IF ( flag_soilt000 .eq. 1 ) THEN PRINT '(A)',' Assume RUC LSM 6-level input' ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input) ) ) ELSE PRINT '(A)',' Assume non-RUC LSM input' ALLOCATE ( zhave( MAX(num_st_levels_input,num_soil_layers) ) ) END IF END IF ! Sort the levels for temperature. outert : DO lout = 1 , num_st_levels_input-1 innert : DO lin = lout+1 , num_st_levels_input IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN temp = st_levels_input(lout) st_levels_input(lout) = st_levels_input(lin) st_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = st_input(i,lout,j) st_input(i,lout,j) = st_input(i,lin,j) st_input(i,lin,j) = temp END DO END DO END IF END DO innert END DO outert IF ( flag_soilt000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) st_input(i,1,j) = tsk(i,j) st_input(i,num_st_levels_input+2,j) = tmn(i,j) END DO END DO END IF ! Sort the levels for moisture. outerm: DO lout = 1 , num_sm_levels_input-1 innerm : DO lin = lout+1 , num_sm_levels_input IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN temp = sm_levels_input(lout) sm_levels_input(lout) = sm_levels_input(lin) sm_levels_input(lin) = NINT(temp) DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) temp = sm_input(i,lout,j) sm_input(i,lout,j) = sm_input(i,lin,j) sm_input(i,lin,j) = temp END DO END DO END IF END DO innerm END DO outerm IF ( flag_soilm000 .NE. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) sm_input(i,1,j) = sm_input(i,2,j) sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j) END DO END DO END IF ! Here are the levels that we have from the input for temperature. IF ( flag_soilt000 .EQ. 1 ) THEN DO l = 1 , num_st_levels_input zhave(l) = st_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt : DO lwant = 1 , num_soil_layers z_havet : DO lhave = 1 , num_st_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet END IF END DO z_havet END DO z_wantt ELSE zhave(1) = 0. DO l = 1 , num_st_levels_input zhave(l+1) = st_levels_input(l) / 100. END DO zhave(num_st_levels_input+2) = 300. / 100. ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantt_2 : DO lwant = 1 , num_soil_layers z_havet_2 : DO lhave = 1 , num_st_levels_input +2 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havet_2 END IF END DO z_havet_2 END DO z_wantt_2 END IF ! Here are the levels that we have from the input for moisture. IF ( flag_soilm000 .EQ. 1 ) THEN DO l = 1 , num_sm_levels_input zhave(l) = sm_levels_input(l) / 100. END DO ! Interpolate between the layers we have (zhave) and those that we want (zs). z_wantm : DO lwant = 1 , num_soil_layers z_havem : DO lhave = 1 , num_sm_levels_input -1 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem END IF END DO z_havem END DO z_wantm ELSE zhave(1) = 0. DO l = 1 , num_sm_levels_input zhave(l+1) = sm_levels_input(l) / 100. END DO zhave(num_sm_levels_input+2) = 300. / 100. z_wantm_2 : DO lwant = 1 , num_soil_layers z_havem_2 : DO lhave = 1 , num_sm_levels_input +2 IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. & ( zs(lwant) .LE. zhave(lhave+1) ) ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + & sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / & ( zhave(lhave+1) - zhave(lhave) ) END DO END DO EXIT z_havem_2 END IF END DO z_havem_2 END DO z_wantm_2 END IF ! Over water, put in reasonable values for soil temperature and moisture. These won't be ! used, but they will make a more continuous plot. IF ( flag_sst .EQ. 1 ) THEN DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j) = sst(i,j) tsk(i,j) = sst(i,j) smois(i,l,j)= 1.0 END DO END IF END DO END DO ELSE DO j = jts , MIN(jde-1,jte) DO i = its , MIN(ide-1,ite) IF ( landmask(i,j) .LT. 0.5 ) THEN DO l = 1 , num_soil_layers tslb(i,l,j)= tsk(i,j) smois(i,l,j)= 1.0 END DO END IF END DO END DO END IF DEALLOCATE (zhave) END SUBROUTINE init_soil_3_real END MODULE module_soil_pre #endif