# Registry file, EM_CONVERT # # At the present time this file is managed manually and edited by hand. # ################################################################################ # Dimension specifications # # This section of the Registry file is used to specify the dimensions # that will be used to define arrays. Dim is the one-letter name of the # dimension. How defined can either be "standard_domain", which means # that the dimension (1) is one of the three spatial dimensions and (2) # it will be set using the standard namelist mechanism and domain data # structure dimension fields (e.g. sd31,ed31,sd32...). # # Order refers to which of the three sets of just-mentioned internal # dimension variables the dimension is referred to by in the driver. # That is, is it the first, second, or third dimension. The registry # infers the mapping of its internal dimensions according to the # combination of Order and Coord-axis that are specified in this table. # Note that it is all right to more than one dimension name for, say, the # x dimension. However, the Order and Coord-axis relationship must be # consistent throughout. # # Note: these entries do not enforce storage order on a particular field. # That is determined by the dimension strings for each field. But it does # relate the dimspec to the internal data structures that the driver uses # to maintain the three physical domain dimensions. # # "How defined" can also specify the name of a namelist variable from which # the definition for the dimension will come; this is specified as # "namelist=". The namelist variable must have been # defined as an integer and with only one entry in the rconfig table. Or # a constant can be specified. The coordinate axis for the dimension is # either X, Y, Z, or C (for "not a spatial dimension"). The Dimname is # the descriptive name of the dimension that will be included in the # metadata in data sets. Note that the b, f, and t modifiers that appear # as the last characters of dimension strings used # in state and # i1 # registry definitions are not dimensions and do not need to be declared # here. # # dimspec i 1 standard_domain x west_east dimspec j 3 standard_domain y south_north dimspec k 2 standard_domain z bottom_top dimspec l 2 namelist=num_soil_layers z soil_layers dimspec u 2 namelist=num_land_cat z land_cat dimspec s 2 namelist=num_soil_cat z soil_cat dimspec p - constant=7501 c microphysics_rstrt_state dimspec w - namelist=spec_bdy_width c spec_bdy_width dimspec e 3 namelist=ensdim z ensemble dimension dimspec g 2 namelist=num_metgrid_levels z num_metgrid_levels dimspec m 2 constant=12 z months_per_year ################################################################################ ################################################################################ ################################################################################ # Lines that start with the word 'state' form a table that is # used by the script use_registry to generate module_state_descript.F # and other files. Also see documentation in use_registry. # # table entries are of the form #
# # # Variables from WPS # state real u_gc igj dyn_em 1 X i1 "UU" "x-wind component" "m s-1" state real v_gc igj dyn_em 1 Y i1 "VV" "y-wind component" "m s-1" state real t_gc igj dyn_em 1 - i1 "TT" "temperature" "K" state real rh_gc igj dyn_em 1 - i1 "RH" "relative humidity" "%" state real ght_gc igj dyn_em 1 - i1 "GHT" "geopotential height" "m" state real p_gc igj dyn_em 1 - i1 "P" "pressure" "Pa" state real xlat_gc ij dyn_em 1 - i1 "XLAT_M" "latitude, positive north" "degrees" state real xlong_gc ij dyn_em 1 - i1 "XLONG_M" "longitude, positive east" "degrees" state real ht_gc ij dyn_em 1 - i1 "HGT_M" "topography elevation" "m" state real tsk_gc ij dyn_em 1 - i1 "SKINTEMP" "skin temperature" "K" state real tavgsfc ij dyn_em 1 - i1 "TAVGSFC" "daily mean of surface air temperature" "K" state real tmn_gc ij dyn_em 1 - i1 "SOILTEMP" "annual mean deep soil temperature" "K" state real pslv_gc ij dyn_em 1 - i1 "PMSL" "sea level pressure" "Pa" state real greenfrac imj dyn_em 1 - i1 "GREENFRAC" "monthly greenness fraction" "0 - 1 fraction" state real albedo12m imj dyn_em 1 - i1 "ALBEDO12M" "background albedo" "0 - 1 fraction" state real pd_gc igj dyn_em 1 - - "PD" "dry pressure" "Pa" state real qv_gc igj dyn_em 1 - i1 "QV" "mixing ratio" "kg kg-1" state real intq_gc ij dyn_em 1 - - "INTQ" "integrated mixing ratio" "Pa" state real pdhs ij dyn_em 1 - - "PDHS" "hydrostatic dry surface pressure" "Pa" #state real qr_gc igj dyn_em 1 - i1 "QR" "rain water mixing ratio" "kg kg-1" #state real qc_gc igj dyn_em 1 - i1 "QC" "cloud water mixing ratio" "kg kg-1" #state real qs_gc igj dyn_em 1 - i1 "QS" "snow mixing ratio" "kg kg-1" #state real qi_gc igj dyn_em 1 - i1 "QI" "cloud ice mixing ratio" "kg kg-1" #state real qg_gc igj dyn_em 1 - i1 "QG" "graupel mixing ratio" "kg kg-1" #----------------------------------------------------------------------------------------------------------------------------------------------------------------- # # Variables for Eulerian mass coordinate dynamics # # Velocities # # U Vel state real u ikj dyn_em 1 X ih "U" "x-wind component" "m s-1" # # V Vel state real v ikj dyn_em 1 Y ih "V" "y-wind component" "m s-1" # # Vertical Vel state real w ikj dyn_em 1 Z ih "W" "z-wind component" "m s-1" # Geopotential state real ph ikj dyn_em 1 Z ih "PH" "perturbation geopotential" "m2 s-2" state real phb ikj dyn_em 1 Z ih "PHB" "base-state geopotential" "m2 s-2" # Potential Temperature state real t ikj dyn_em 1 - ih "T" "perturbation potential temperature (theta-t0)" "K" # Mass state real mu ij dyn_em 1 - ih "MU" "perturbation dry air mass in column" "Pa" state real mub ij dyn_em 1 - ih "MUB" "base state dry air mass in column" "Pa" # Pressure and Density state real p ikj dyn_em 1 - ih "p" "perturbation pressure" "Pa" state real pb ikj dyn_em 1 - ih "pb" "BASE STATE PRESSURE " "Pa" # 2m and 10m output diagnostics state real Q2 ij misc 1 - ih "Q2" "QV at 2 M" "kg kg-1" state real T2 ij misc 1 - ih "T2" "TEMP at 2 M" "K" state real TH2 ij misc 1 - ih "TH2" "POT TEMP at 2 M" "K" state real PSFC ij misc 1 - ih "PSFC" "SFC PRESSURE" "Pa" state real U10 ij misc 1 - ih "U10" "U at 10 M" "m s-1" state real V10 ij misc 1 - ih "V10" "V at 10 M" "m s-1" # Scalar (4D) arrays # Moist Scalars # # The first line ensures that there will be identifiers named moist and # moist_tend even if there are not any moist scalars (so the essentially # dry code will will still link properly) # state real - ikjftb moist 1 - - - state real qv ikjftb moist 1 - ih "QVAPOR" "Water vapor mixing ratio" "kg kg-1" state real qc ikjftb moist 1 - ih "QCLOUD" "Cloud water mixing ratio" "kg kg-1" state real qr ikjftb moist 1 - ih "QRAIN" "Rain water mixing ratio" "kg kg-1" state real qi ikjftb moist 1 - ih "QICE" "Ice mixing ratio" "kg kg-1" state real qs ikjftb moist 1 - ih "QSNOW" "Snow mixing ratio" "kg kg-1" state real qg ikjftb moist 1 - ih "QGRAUP" "Graupel mixing ratio" "kg kg-1" state real - ikjftb chem 1 - - - state real - ikjftb scalar 1 - - - state real qni ikjftb scalar 1 - ih "QNICE" "Ice Number concentration" "# kg(-1)" state real ht ij misc 1 - ih "HGT" "Terrain Height" "m" state real TSK ij misc 1 - ih "TSK" "SURFACE SKIN TEMPERATURE" "K" # from the metadata? Otherwise it's a field? state real p_top - misc - - ih "p_top" "PRESSURE TOP OF THE MODEL" "Pa" state real RAINC ij misc 1 - ih "RAINC" "ACCUMULATED TOTAL CUMULUS PRECIPITATION" "mm" state real RAINNC ij misc 1 - ih "RAINNC" "ACCUMULATED TOTAL GRID SCALE PRECIPITATION" "mm" state real SNOWC ij misc 1 - ih "SNOWC" "FLAG INDICATING SNOW COVERAGE (1 FOR SNOW COVER)" "" # #--------------------------------------------------------------------------------------------------------------------------------------- # ###### # # Variables that are set at run-time to control configuration (namelist-settable) # #
# Time Control rconfig integer run_days namelist,time_control 1 0 irh "run_days" "NUMBER OF DAYS TO RUN" rconfig integer run_hours namelist,time_control 1 0 irh "run_hours" "NUMBER OF HOURS TO RUN" rconfig integer run_minutes namelist,time_control 1 0 irh "run_minutes" "NUMBER OF MINUTES TO RUN" rconfig integer run_seconds namelist,time_control 1 0 irh "run_seconds" "NUMBER OF SECONDS TO RUN" rconfig integer start_year namelist,time_control max_domains 1993 irh "start_year" "4 DIGIT YEAR OF START OF MODEL" "YEARS" rconfig integer start_month namelist,time_control max_domains 03 irh "start_month" "2 DIGIT MONTH OF THE YEAR OF START OF MODEL, 1-12" "MONTHS" rconfig integer start_day namelist,time_control max_domains 13 irh "start_day" "2 DIGIT DAY OF THE MONTH OF START OF MODEL, 1-31" "DAYS" rconfig integer start_hour namelist,time_control max_domains 12 irh "start_hour" "2 DIGIT HOUR OF THE DAY OF START OF MODEL, 0-23" "HOURS" rconfig integer start_minute namelist,time_control max_domains 00 irh "start_minute" "2 DIGIT MINUTE OF THE HOUR OF START OF MODEL, 0-59" "MINUTES" rconfig integer start_second namelist,time_control max_domains 00 irh "start_second" "2 DIGIT SECOND OF THE MINUTE OF START OF MODEL, 0-59" "SECONDS" rconfig integer end_year namelist,time_control max_domains 1993 irh "end_year" "4 DIGIT YEAR OF END OF MODEL" "YEARS" rconfig integer end_month namelist,time_control max_domains 03 irh "end_month" "2 DIGIT MONTH OF THE YEAR OF END OF MODEL, 1-12" "MONTHS" rconfig integer end_day namelist,time_control max_domains 14 irh "end_day" "2 DIGIT DAY OF THE MONTH OF END OF MODEL, 1-31" "DAYS" rconfig integer end_hour namelist,time_control max_domains 12 irh "end_hour" "2 DIGIT HOUR OF THE DAY OF END OF MODEL, 0-23" "HOURS" rconfig integer end_minute namelist,time_control max_domains 00 irh "end_minute" "2 DIGIT MINUTE OF THE HOUR OF END OF MODEL, 0-59" "MINUTES" rconfig integer end_second namelist,time_control max_domains 00 irh "end_second" "2 DIGIT SECOND OF THE MINUTE OF END OF MODEL, 0-59" "SECONDS" rconfig integer interval_seconds namelist,time_control 1 43200 irh "interval_seconds" "SECONDS BETWEEN ANALYSIS AND BOUNDARY PERIODS" "SECONDS" rconfig logical input_from_file namelist,time_control max_domains .false. irh "input_from_file" "T/F INPUT FOR THIS DOMAIN FROM A SEPARATE INPUT FILE" "" rconfig integer fine_input_stream namelist,time_control max_domains 0 irh "fine_input_stream" "0 THROUGH 11, WHAT INPUT STREAM IS FINE GRID IC FROM" "" rconfig logical input_from_hires namelist,time_control max_domains .false. irh "input_from_hires" "T/F INPUT FOR THIS DOMAIN FROM USGS HI RES TERRAIN" "" rconfig character rsmas_data_path namelist,time_control 1 "." - "rsmas_data_path" "" "" include registry.io_boilerplate include registry.io_boilerplate_EM rconfig integer JULYR namelist,time_control max_domains 0 h "JULYR" "" "" rconfig integer JULDAY namelist,time_control max_domains 1 h "JULDAY" "" "" rconfig real GMT namelist,time_control max_domains 0. h "GMT" "" "" rconfig character input_inname namelist,time_control 1 "wrfinput_d" - "name of input infile" "" "" rconfig character input_outname namelist,time_control 1 "wrfinput_d" - "name of input outfile" "" "" rconfig character bdy_inname namelist,time_control 1 "wrfbdy_d" - "name of boundary infile" "" "" rconfig character bdy_outname namelist,time_control 1 "wrfbdy_d" - "name of boundary outfile" "" "" rconfig character rst_inname namelist,time_control 1 "wrfrst_d_" - "name of restrt infile" "" "" rconfig character rst_outname namelist,time_control 1 "wrfrst_d_" - "name of restrt outfile" "" "" rconfig logical write_input namelist,time_control 1 .false. - "write input data for 3dvar etc." "" "" rconfig logical write_restart_at_0h namelist,time_control 1 .false. h "write_restart_at_0h" "" "" rconfig logical adjust_output_times namelist,time_control 1 .false. - "adjust_output_times" rconfig logical adjust_input_times namelist,time_control 1 .false. - "adjust_input_times" rconfig logical nocolons namelist,time_control 1 .false. - "nocolons" # Domains rconfig integer time_step namelist,domains 1 - ih "time_step" rconfig integer time_step_fract_num namelist,domains 1 0 ih "time_step_fract_num" rconfig integer time_step_fract_den namelist,domains 1 1 ih "time_step_fract_den" rconfig integer max_dom namelist,domains 1 1 irh "max_dom" "" "" rconfig integer s_we namelist,domains max_domains 1 irh "s_we" "" "" rconfig integer e_we namelist,domains max_domains 32 irh "e_we" "" "" rconfig integer s_sn namelist,domains max_domains 1 irh "s_sn" "" "" rconfig integer e_sn namelist,domains max_domains 32 irh "e_sn" "" "" rconfig integer s_vert namelist,domains max_domains 1 irh "s_vert" "" "" rconfig integer e_vert namelist,domains max_domains 31 irh "e_vert" "" "" rconfig integer num_metgrid_levels namelist,domains 1 27 irh "num_metgrid_levels" "" "" rconfig integer interp_type namelist,domains 1 1 irh "interp_type" "" "" rconfig logical lowest_lev_from_sfc namelist,domains 1 .false. irh "lowest_lev_from_sfc" "" "" rconfig integer lagrange_order namelist,domains 1 1 irh "lagrange_order" "1=linear, 2=quadratic vertical interpolation" "" rconfig integer force_sfc_in_vinterp namelist,domains 1 0 irh "force_sfc_in_vinterp" "number of eta levels forced to use sfc in vert interp" "" rconfig real zap_close_levels namelist,domains 1 500 irh "zap_close_levels" "delta p where level is removed in vert interp" "Pa" rconfig real dx namelist,domains max_domains 200 h "dx" "X HORIZONTAL RESOLUTION" "METERS" rconfig real dy namelist,domains max_domains 200 h "dy" "Y HORIZONTAL RESOLUTION" "METERS" rconfig integer grid_id namelist,domains max_domains 1 irh "id" "" "" rconfig logical grid_allowed namelist,domains max_domains .true. irh "allowed" "" "" rconfig integer parent_id namelist,domains max_domains 0 h "parent_id" "" "" rconfig integer i_parent_start namelist,domains max_domains 1 rh "i_parent_start" "" "" rconfig integer j_parent_start namelist,domains max_domains 1 rh "j_parent_start" "" "" rconfig integer parent_grid_ratio namelist,domains max_domains 1 h "parent_grid_ratio" "" "" rconfig integer parent_time_step_ratio namelist,domains max_domains 1 h "parent_time_step_ratio" "" "" rconfig integer feedback namelist,domains 1 1 h "feedback" "" "" rconfig integer smooth_option namelist,domains 1 2 h "smooth_option" "" "" rconfig integer blend_width namelist,domains 1 5 h "blend_width" "width of cg fg terrain blended zone" "" rconfig real ztop namelist,domains max_domains 15000. h "ztop" "" "" rconfig integer moad_grid_ratio namelist,domains max_domains 1 h "moad_grid_ratio" "" "" rconfig integer moad_time_step_ratio namelist,domains max_domains 1 h "moad_time_step_ratio" "" "" rconfig integer shw namelist,domains max_domains 2 h "stencil_half_width" "HORIZONTAL INTERPOLATION STENCIL HALF-WIDTH" "GRID POINTS" rconfig integer tile_sz_x namelist,domains 1 0 - "tile_sz_x" "" "" rconfig integer tile_sz_y namelist,domains 1 0 - "tile_sz_y" "" "" rconfig integer numtiles namelist,domains 1 1 - "numtiles" "" "" rconfig integer nproc_x namelist,domains 1 -1 - "nproc_x" "-1 means not set" "" rconfig integer nproc_y namelist,domains 1 -1 - "nproc_y" "-1 means not set" "" rconfig integer irand namelist,domains 1 0 - "irand" "" "" rconfig real dt derived max_domains 2. h "dt" "TEMPORAL RESOLUTION" "SECONDS" rconfig integer num_moves namelist,domains 1 0 rconfig integer vortex_interval namelist,domains max_domains 15 - "" "" "minutes" rconfig integer max_vortex_speed namelist,domains max_domains 40 - "" "" "meters per second" rconfig integer corral_dist namelist,domains max_domains 8 rconfig integer move_id namelist,domains max_moves 0 rconfig integer move_interval namelist,domains max_moves 999999999 rconfig integer move_cd_x namelist,domains max_moves 0 rconfig integer move_cd_y namelist,domains max_moves 0 rconfig logical swap_x namelist,domains max_domains .false. rh "swap_x" "" "" rconfig logical swap_y namelist,domains max_domains .false. rh "swap_y" "" "" rconfig logical cycle_x namelist,domains max_domains .false. rh "cycle_x" "" "" rconfig logical cycle_y namelist,domains max_domains .false. rh "cycle_y" "" "" rconfig logical reorder_mesh namelist,domains 1 .false. rh "reorder_mesh" "" "" rconfig logical perturb_input namelist,domains 1 .false. h "" "" "" rconfig real eta_levels namelist,domains max_eta -1. rconfig real max_dz namelist,domains 1 1000. # Physics rconfig integer mp_physics namelist,physics max_domains 0 rh "mp_physics" "" "" rconfig integer ra_lw_physics namelist,physics max_domains 0 rh "ra_lw_physics" "" "" rconfig integer ra_sw_physics namelist,physics max_domains 0 rh "ra_sw_physics" "" "" rconfig real radt namelist,physics max_domains 0 h "RADT" "" "" rconfig integer sf_sfclay_physics namelist,physics max_domains 0 rh "sf_sfclay_physics" "" "" rconfig integer sf_surface_physics namelist,physics max_domains 0 rh "sf_surface_physics" "" "" rconfig integer bl_pbl_physics namelist,physics max_domains 0 rh "bl_pbl_physics" "" "" rconfig real BLDT namelist,physics max_domains 0 h "BLDT" "" "" rconfig integer cu_physics namelist,physics max_domains 0 rh "cu_physics" "" "" rconfig real CUDT namelist,physics max_domains 0 h "CUDT" "" "" rconfig real GSMDT namelist,physics max_domains 0 h "GSMDT" "" "" rconfig integer ISFFLX namelist,physics 1 1 irh "ISFFLX" "" "" rconfig integer IFSNOW namelist,physics 1 0 irh "IFSNOW" "" "" rconfig integer ICLOUD namelist,physics 1 1 irh "ICLOUD" "" "" rconfig integer surface_input_source namelist,physics 1 1 irh "surface_input_source" "1=static (fractional), 2=time dependent (dominant), 3=hybrid (not yet implemented)" "" rconfig integer num_soil_layers namelist,physics 1 5 irh "num_soil_layers" "" "" rconfig integer maxiens namelist,physics 1 1 irh "maxiens" "" "" rconfig integer maxens namelist,physics 1 3 irh "maxens" "" "" rconfig integer maxens2 namelist,physics 1 3 irh "maxens2" "" "" rconfig integer maxens3 namelist,physics 1 16 irh "maxens3" "" "" rconfig integer ensdim namelist,physics 1 144 irh "ensdim" "" "" rconfig integer chem_opt namelist,physics max_domains 0 rh "chem_opt" "" "" rconfig integer num_land_cat namelist,physics 1 24 - "num_land_cat" "" "" rconfig integer num_soil_cat namelist,physics 1 16 - "num_soil_cat" "" "" rconfig integer mp_zero_out namelist,physics 1 0 - "mp_zero_out" "microphysics fields set to zero 0=no action taken, 1=all fields but Qv, 2=all fields including Qv" "flag" rconfig real mp_zero_out_thresh namelist,physics 1 1.e-8 - "mp_zero_out_thresh" "minimum threshold for non-Qv moist fields, below are set to zero" "kg/kg" rconfig real seaice_threshold namelist,physics 1 271 h "seaice_threshold" "tsk below which which water points are set to sea ice for slab scheme" "K" rconfig integer sst_update namelist,physics 1 0 h "sst_update" "update sst from wrflowinp file 0=no, 1=yes" "" rconfig integer co2tf namelist,physics 1 0 - "GFDL radiation co2 flag" "" "" # Dynamics # dynamics option (see package definitions, below) rconfig integer rk_ord namelist,dynamics 1 3 irh "rk_order" "" "" rconfig integer w_damping namelist,dynamics 1 0 irh "w_damping" "" "" # diff_opt 1=old diffusion, 2=new rconfig integer diff_opt namelist,dynamics 1 1 irh "diff_opt" "" "" # km_opt 1=old coefs, 2=tke, 3=Smagorinksy rconfig integer km_opt namelist,dynamics 1 1 irh "km_opt" "" "" rconfig integer damp_opt namelist,dynamics 1 0 irh "damp_opt" "" "" rconfig real zdamp namelist,dynamics max_domains 5000. h "zdamp" "" "" rconfig real dampcoef namelist,dynamics max_domains 0. h "dampcoef" "" "" rconfig real khdif namelist,dynamics max_domains 0 h "khdif" "" "" rconfig real kvdif namelist,dynamics max_domains 0 h "kvdif" "" "" rconfig real smdiv namelist,dynamics max_domains 0.1 h "smdiv" "" "" rconfig real emdiv namelist,dynamics max_domains 0.01 h "emdiv" "" "" rconfig real epssm namelist,dynamics max_domains .1 h "epssm" "" "" rconfig logical non_hydrostatic namelist,dynamics max_domains .true. irh "non_hydrostatic" "" "" rconfig integer time_step_sound namelist,dynamics max_domains 0 h "time_step_sound" "" "" rconfig integer h_mom_adv_order namelist,dynamics max_domains 5 rh "h_mom_adv_order" "" "" rconfig integer v_mom_adv_order namelist,dynamics max_domains 3 rh "v_mom_adv_order" "" "" rconfig integer h_sca_adv_order namelist,dynamics max_domains 5 rh "h_sca_adv_order" "" "" rconfig integer v_sca_adv_order namelist,dynamics max_domains 3 rh "v_sca_adv_order" "" "" rconfig logical top_radiation namelist,dynamics max_domains .false. rh "top_radiation" "" "" rconfig real tke_upper_bound namelist,dynamics max_domains 1000. h "tke_upper_bound" "" "" rconfig real tke_drag_coefficient namelist,dynamics max_domains 0. h "tke_drag_coefficient" "" "" rconfig real tke_heat_flux namelist,dynamics max_domains 0. h "tke_heat_flux" "" "" rconfig logical pert_coriolis namelist,dynamics max_domains .false. irh "pert_coriolis" "" "" rconfig logical mix_full_fields namelist,dynamics max_domains .false. irh "mix_full_field" "" "" rconfig real base_pres namelist,dynamics 1 100000. h "base_pres" "Base state pressure - do not change (10^5 Pa), real only" "Pa" rconfig real base_temp namelist,dynamics 1 290. h "base_temp" "Base state sea level temperature, real only" "K" rconfig real base_lapse namelist,dynamics 1 50. h "base_lapse" "Base state temperature difference between base pres and 1/e of atm depth - do not change, real only" "K" # Bdy_control rconfig integer spec_bdy_width namelist,bdy_control 1 5 irh "spec_bdy_width" "" "" rconfig integer spec_zone namelist,bdy_control 1 1 irh "spec_zone" "" "" rconfig integer relax_zone namelist,bdy_control 1 4 irh "relax_zone" "" "" rconfig logical specified namelist,bdy_control max_domains .false. rh "specified" "" "" rconfig logical periodic_x namelist,bdy_control max_domains .false. rh "periodic_x" "" "" rconfig logical symmetric_xs namelist,bdy_control max_domains .false. rh "symmetric_xs" "" "" rconfig logical symmetric_xe namelist,bdy_control max_domains .false. rh "symmetric_xe" "" "" rconfig logical open_xs namelist,bdy_control max_domains .false. rh "open_xs" "" "" rconfig logical open_xe namelist,bdy_control max_domains .false. rh "open_xe" "" "" rconfig logical periodic_y namelist,bdy_control max_domains .false. rh "periodic_y" "" "" rconfig logical symmetric_ys namelist,bdy_control max_domains .false. rh "symmetric_ys" "" "" rconfig logical symmetric_ye namelist,bdy_control max_domains .false. rh "symmetric_ye" "" "" rconfig logical open_ys namelist,bdy_control max_domains .false. rh "open_ys" "" "" rconfig logical open_ye namelist,bdy_control max_domains .false. rh "open_ye" "" "" rconfig logical nested namelist,bdy_control max_domains .false. rh "nested" "" "" rconfig integer real_data_init_type namelist,bdy_control 1 1 irh "real_data_init_type" "REAL DATA INITIALIZATION OPTIONS: 1=SI, 2=MM5, 3=GENERIC" "PRE-PROCESSOR TYPES" rconfig integer background_proc_id namelist,grib2 1 255 rh "background_proc_id" "Background processing id for grib2" "" rconfig integer forecast_proc_id namelist,grib2 1 255 rh "forecast_proc_id" "Analysis and forecast processing id for grib2" "" rconfig integer production_status namelist,grib2 1 255 rh "production_status" "Background processing id for grib2" "" rconfig integer compression namelist,grib2 1 40 rh "compression" "grib2 compression, 40 for JPEG2000 or 41 for PNG" "" # NAMELIST DERIVED rconfig real cen_lat derived max_domains 0 - "cen_lat" "center latitude" "degrees, negative is south" rconfig real cen_lon derived max_domains 0 - "cen_lon" "central longitude" "degrees, negative is west" rconfig real truelat1 derived max_domains 0 - "true_lat1" "first standard parallel" "degrees, negative is south" rconfig real truelat2 derived max_domains 0 - "true_lat2" "second standard parallel" "degrees, negative is south" rconfig real moad_cen_lat derived max_domains 0 - "moad_cen_lat" "center latitude of the most coarse grid" "degrees, negative is south" rconfig real stand_lon derived max_domains 0 - "stand_lon" "standard longitude, parallel to j-direction, perpendicular to i-direction " "degrees, negative is west" rconfig real bdyfrq derived max_domains 0 - "bdyfrq" "lateral boundary input frequency" "seconds" rconfig integer iswater derived max_domains 0 - "iswater" "land use index of water" "index category" rconfig integer isice derived max_domains 0 - "isice" "land use index of ice" "index category" rconfig integer isurban derived max_domains 0 - "isurban" "land use index for 'urban and built-up" "index category" rconfig integer isoilwater derived max_domains 0 - "isoilwater" "land use index of water for soil" "index category" rconfig integer map_proj derived max_domains 0 - "map_proj" "domain map projection" "0=none, 1=Lambert, 2=polar, 3=Mercator" # # Single dummy declaration to define a nodyn dyn option state integer nodyn_dummy - dyn_nodyn - - - "" "" "" #------------------------------------------------------------------------------------------------------------------------------------------- # a few entries that need to be in the registry for stuff in share to compile, but that you probably do not want converted # State for derived time quantities. state real xtime - - - - - "xtime" "minutes since simulation start" "" state real julian - - - - - "julian" "day of year, 0.0 at 0Z on 1 Jan." "days" state real dtbc - misc - - ir "dtbc" "TIME SINCE BOUNDARY READ" "" # input file descriptor for lbcs on parent domain state integer lbc_fid - - - - - "lbc_fid" "" "" # indicates if tiling has been computed state logical tiled - - - - - "tiled" "" "" # indicates if patches have been computed state logical patched - - - - - "patched" "" "" # indicates whether to read input from file or generate #state logical input_from_file - - - - - "input_from_file" "" "" # Mask for moving nest interpolations state integer imask_nostag ij misc 1 - state integer imask_xstag ij misc 1 X state integer imask_ystag ij misc 1 Y state integer imask_xystag ij misc 1 XY state real sm000010 ij misc 1 - i1 "SM000010" "LAYER SOIL MOISTURE" "m3 m-3" state real sm010040 ij misc 1 - i1 "SM010040 " "LAYER SOIL MOISTURE" "m3 m-3" state real sm040100 ij misc 1 - i1 "SM040100 " "LAYER SOIL MOISTURE" "m3 m-3" state real sm100200 ij misc 1 - i1 "SM100200 " "LAYER SOIL MOISTURE" "m3 m-3" state real sm010200 ij misc 1 - i1 "SM010200" "LAYER SOIL MOISTURE" "m3 m-3" state real soilm000 ij misc 1 - i1 "SOILM000" "LAYER SOIL MOISTURE" "m3 m-3" state real soilm005 ij misc 1 - i1 "SOILM005" "LAYER SOIL MOISTURE" "m3 m-3" state real soilm020 ij misc 1 - i1 "SOILM020" "LAYER SOIL MOISTURE" "m3 m-3" state real soilm040 ij misc 1 - i1 "SOILM040" "LAYER SOIL MOISTURE" "m3 m-3" state real soilm160 ij misc 1 - i1 "SOILM160" "LAYER SOIL MOISTURE" "m3 m-3" state real soilm300 ij misc 1 - i1 "SOILM300" "LAYER SOIL MOISTURE" "m3 m-3" state real sw000010 ij misc 1 - i1 "SW000010" "LAYER SOIL LIQUID" "m3 m-3" state real sw010040 ij misc 1 - i1 "SW010040" "LAYER SOIL LIQUID" "m3 m-3" state real sw040100 ij misc 1 - i1 "SW040100" "LAYER SOIL LIQUID" "m3 m-3" state real sw100200 ij misc 1 - i1 "SW100200" "LAYER SOIL LIQUID" "m3 m-3" state real sw010200 ij misc 1 - i1 "SW010200" "LAYER SOIL LIQUID" "m3 m-3" state real soilw000 ij misc 1 - i1 "SOILW000" "LAYER SOIL LIQUID" "m3 m-3" state real soilw005 ij misc 1 - i1 "SOILW005" "LAYER SOIL LIQUID" "m3 m-3" state real soilw020 ij misc 1 - i1 "SOILW020" "LAYER SOIL LIQUID" "m3 m-3" state real soilw040 ij misc 1 - i1 "SOILW040" "LAYER SOIL LIQUID" "m3 m-3" state real soilw160 ij misc 1 - i1 "SOILW160" "LAYER SOIL LIQUID" "m3 m-3" state real soilw300 ij misc 1 - i1 "SOILW300" "LAYER SOIL LIQUID" "m3 m-3" state real st000010 ij misc 1 - i1 "ST000010" "LAYER SOIL TEMPERATURE" "K" state real st010040 ij misc 1 - i1 "ST010040" "LAYER SOIL TEMPERATURE" "K" state real st040100 ij misc 1 - i1 "ST040100" "LAYER SOIL TEMPERATURE" "K" state real st100200 ij misc 1 - i1 "ST100200" "LAYER SOIL TEMPERATURE" "K" state real st010200 ij misc 1 - i1 "ST010200" "LAYER SOIL TEMPERATURE" "K" state real soilt000 ij misc 1 - i1 "SOILT000" "LAYER SOIL TEMPERATURE" "K" state real soilt005 ij misc 1 - i1 "SOILT005" "LAYER SOIL TEMPERATURE" "K" state real soilt020 ij misc 1 - i1 "SOILT020" "LAYER SOIL TEMPERATURE" "K" state real soilt040 ij misc 1 - i1 "SOILT040" "LAYER SOIL TEMPERATURE" "K" state real soilt160 ij misc 1 - i1 "SOILT160" "LAYER SOIL TEMPERATURE" "K" state real soilt300 ij misc 1 - i1 "SOILT300" "LAYER SOIL TEMPERATURE" "K" state real landmask ij misc 1 - rd=(interp_fcnm)u=(copy_fcnm) "LANDMASK" "LAND MASK (1 FOR LAND, 0 FOR WATER)" "" state real topostdv ij misc 1 - i12 "TOPOSTDV" "ELEVATION STD DEV" "m" state real toposlpx ij misc 1 - i12 "TOPOSLPX" "ELEVATION X SLOPE" "" state real toposlpy ij misc 1 - i12 "TOPOSLPY" "ELEVATION Y SLOPE" "" state real shdmax ij misc 1 - - "SHDMAX" "ANNUAL MAX VEG FRACTION" "" state real shdmin ij misc 1 - - "SHDMIN" "ANNUAL MIN VEG FRACTION" "" state real snoalb ij misc 1 - - "SNOALB" "ANNUAL MAX SNOW ALBEDO IN FRACTION" "" state real slopecat ij misc 1 - i12 "SLOPECAT" "SLOPE CATEGORY" "" state real toposoil ij misc 1 - i12 "SOILHGT" "ELEVATION OF LSM DATA" "m" state real landusef iuj misc 1 Z i12 "LANDUSEF" "LANDUSE FRACTION BY CATEGORY" "" state real soilctop isj misc 1 Z i12 "SOILCTOP" "SOIL CAT FRACTION (TOP)" "" state real soilcbot isj misc 1 Z i1 "SOILCBOT" "SOIL CAT FRACTION (BOTTOM)" "" state real soilcat ij misc 1 - i12 "SOILCAT" "SOIL CAT DOMINANT TYPE" "" state real vegcat ij misc 1 - i12 "VEGCAT" "VEGETATION CAT DOMINANT TYPE" "" # #--------------------------------------------------------------------------------------------------------------------------------------- # Package Declarations # #key package associated package associated 4d scalars # name namelist choice state vars #package passivec1 chem_opt==0 - package passiveqv mp_physics==0 - moist:qv package kesslerscheme mp_physics==1 - moist:qv,qc,qr package linscheme mp_physics==2 - moist:qv,qc,qr,qi,qs,qg package wsm3scheme mp_physics==3 - moist:qv,qc,qr package wsm5scheme mp_physics==4 - moist:qv,qc,qr,qi,qs package etampnew mp_physics==5 - moist:qv,qc package wsm6scheme mp_physics==6 - moist:qv,qc,qr,qi,qs,qg package thompson mp_physics==8 - moist:qv,qc,qr,qi,qs,qg;scalar:qni package rrtmscheme ra_lw_physics==1 - - package gfdllwscheme ra_lw_physics==99 - moist:qv,qc,qr,qi package swradscheme ra_sw_physics==1 - - package gsfcswscheme ra_sw_physics==2 - - package gfdlswscheme ra_sw_physics==99 - - package sfclayscheme sf_sfclay_physics==1 - - package myjsfcscheme sf_sfclay_physics==2 - - package gfssfcscheme sf_sfclay_physics==3 - - package slabscheme sf_surface_physics==1 - - package lsmscheme sf_surface_physics==2 - - package ruclsmscheme sf_surface_physics==3 - - package ysuscheme bl_pbl_physics==1 - - package myjpblscheme bl_pbl_physics==2 - - package gfsscheme bl_pbl_physics==3 - - package mrfscheme bl_pbl_physics==99 - - package kfetascheme cu_physics==1 - - package bmjscheme cu_physics==2 - - package gdscheme cu_physics==3 - - package sasscheme cu_physics==4 - - package kfscheme cu_physics==99 - - # only need to specify these once; not for every io_form* variable package io_intio io_form_restart==1 - - package io_netcdf io_form_restart==2 - - # Placeholders for additional packages (we can go beyond zzz # but that will entail modifying frame/module_io.F and frame/md_calls.m4) # Please note these are placeholders; HDF has not been implemented yet. package io_hdf io_form_restart==3 - - package io_phdf5 io_form_restart==4 - - package io_grib1 io_form_restart==5 - - package io_mcel io_form_restart==6 - - package io_esmf io_form_restart==7 - - package io_yyy io_form_restart==8 - - package io_zzz io_form_restart==9 - - package io_grib2 io_form_restart==10 - - package io_pnetcdf io_form_restart==11 - -