MODULE module_si_io_nmm USE module_optional_input IMPLICIT NONE ! Input 3D meteorological fields. REAL , DIMENSION(:,:,:) , ALLOCATABLE :: u_input , v_input , & q_input , t_input ! Input 3D LSM fields. REAL , DIMENSION(:,:,:) , ALLOCATABLE :: landuse_frac_input , & soil_top_cat_input , & soil_bot_cat_input REAL, ALLOCATABLE:: htm_in(:,:,:),vtm_in(:,:,:) ! Input 2D surface fields. REAL , DIMENSION(:,:) , ALLOCATABLE :: soilt010_input , soilt040_input , & soilt100_input , soilt200_input , & soilm010_input , soilm040_input , & soilm100_input , soilm200_input , & psfc_in,pmsl REAL , DIMENSION(:,:) , ALLOCATABLE :: lat_wind, lon_wind REAL , DIMENSION(:) , ALLOCATABLE :: DETA_in, AETA_in, ETAX_in REAL , DIMENSION(:) , ALLOCATABLE :: DETA1_in, AETA1_in, ETA1_in REAL , DIMENSION(:) , ALLOCATABLE :: DETA2_in, AETA2_in, ETA2_in, DFL_in REAL , DIMENSION(:,:,:), ALLOCATABLE :: st_inputx , sm_inputx, sw_inputx ! Local input arrays REAL,DIMENSION(:,:),ALLOCATABLE :: dum2d INTEGER,DIMENSION(:,:),ALLOCATABLE :: idum2d REAL,DIMENSION(:,:,:),ALLOCATABLE :: dum3d LOGICAL , SAVE :: first_time_in = .TRUE. INTEGER :: flag_soilt010 , flag_soilt100 , flag_soilt200 , & flag_soilm010 , flag_soilm100 , flag_soilm200 ! Some constants to allow simple dimensions in the defined types ! given below. INTEGER, PARAMETER :: var_maxdims = 5 INTEGER, PARAMETER :: max_staggers_xy_new = 4 INTEGER, PARAMETER :: max_staggers_xy_old = 3 INTEGER, PARAMETER :: max_staggers_z = 2 INTEGER, PARAMETER :: max_standard_lats = 4 INTEGER, PARAMETER :: max_standard_lons = 4 INTEGER, PARAMETER :: max_fg_variables = 200 INTEGER, PARAMETER :: max_vertical_levels = 2000 ! This module defines the items needed for the WRF metadata ! which is broken up into three levels: ! Global metadata: Those things which apply to the ! entire simulation that are ! independent of time, domain, or ! variable ! ! Domain metadata: Those things which apply to ! a single domain (this may ! or may not be time dependent) ! ! Variable metadata: Those things which apply to ! a specific variable at a ! specific time ! ! The variable names and definitions can be ! found in the wrf_metadata spec, which is still ! a living document as coding goes on. The names ! may not match exactly, but you should be able ! to figure things out. ! TYPE wrf_var_metadata CHARACTER (LEN=8) :: name CHARACTER (LEN=16) :: units CHARACTER (LEN=80) :: description INTEGER :: domain_id INTEGER :: ndim INTEGER :: dim_val (var_maxdims) CHARACTER(LEN=4) :: dim_desc (var_maxdims) INTEGER :: start_index(var_maxdims) INTEGER :: stop_index(var_maxdims) INTEGER :: h_stagger_index INTEGER :: v_stagger_index CHARACTER(LEN=8) :: array_order CHARACTER(LEN=4) :: field_type CHARACTER(LEN=8) :: field_source_prog CHARACTER(LEN=80) :: source_desc CHARACTER(LEN=8) :: field_time_type INTEGER :: vt_date_start REAL :: vt_time_start INTEGER :: vt_date_stop REAL :: vt_time_stop END TYPE wrf_var_metadata TYPE(wrf_var_metadata) :: var_meta , var_info TYPE wrf_domain_metadata INTEGER :: id INTEGER :: parent_id CHARACTER(LEN=8) :: dyn_init_src CHARACTER(LEN=8) :: static_init_src INTEGER :: vt_date REAL :: vt_time INTEGER :: origin_parent_x INTEGER :: origin_parent_y INTEGER :: ratio_to_parent REAL :: delta_x REAL :: delta_y REAL :: top_level INTEGER :: origin_parent_z REAL :: corner_lats_new(4,max_staggers_xy_new) REAL :: corner_lons_new(4,max_staggers_xy_new) REAL :: corner_lats_old(4,max_staggers_xy_old) REAL :: corner_lons_old(4,max_staggers_xy_old) INTEGER :: xdim INTEGER :: ydim INTEGER :: zdim END TYPE wrf_domain_metadata TYPE(wrf_domain_metadata) :: dom_meta TYPE wrf_global_metadata CHARACTER(LEN=80) :: simulation_name CHARACTER(LEN=80) :: user_desc INTEGER :: si_version INTEGER :: analysis_version INTEGER :: wrf_version INTEGER :: post_version CHARACTER(LEN=32) :: map_projection REAL :: moad_known_lat REAL :: moad_known_lon CHARACTER(LEN=8) :: moad_known_loc REAL :: moad_stand_lats(max_standard_lats) REAL :: moad_stand_lons(max_standard_lons) REAL :: moad_delta_x REAL :: moad_delta_y CHARACTER(LEN=4) :: horiz_stagger_type INTEGER :: num_stagger_xy REAL :: stagger_dir_x_new(max_staggers_xy_new) REAL :: stagger_dir_y_new(max_staggers_xy_new) REAL :: stagger_dir_x_old(max_staggers_xy_old) REAL :: stagger_dir_y_old(max_staggers_xy_old) INTEGER :: num_stagger_z REAL :: stagger_dir_z(max_staggers_z) CHARACTER(LEN=8) :: vertical_coord INTEGER :: num_domains INTEGER :: init_date REAL :: init_time INTEGER :: end_date REAL :: end_time CHARACTER(LEN=4) :: lu_source INTEGER :: lu_water INTEGER :: lu_ice END TYPE wrf_global_metadata TYPE(wrf_global_metadata) :: global_meta CONTAINS SUBROUTINE read_si ( grid, file_date_string ) USE module_soil_pre USE module_domain IMPLICIT NONE TYPE(domain) , INTENT(INOUT) :: grid CHARACTER (LEN=19) , INTENT(IN) :: file_date_string INTEGER :: ids,ide,jds,jde,kds,kde & ,ims,ime,jms,jme,kms,kme & ,its,ite,jts,jte,kts,kte INTEGER :: i , j , k , loop, IMAX, JMAX REAL :: dummy CHARACTER (LEN= 8) :: dummy_char INTEGER :: ok , map_proj , ok_open REAL :: pt INTEGER :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat SELECT CASE ( model_data_order ) CASE ( DATA_ORDER_ZXY ) kds = grid%sd31 ; kde = grid%ed31 ; ids = grid%sd32 ; ide = grid%ed32 ; jds = grid%sd33 ; jde = grid%ed33 ; kms = grid%sm31 ; kme = grid%em31 ; ims = grid%sm32 ; ime = grid%em32 ; jms = grid%sm33 ; jme = grid%em33 ; kts = grid%sp31 ; kte = grid%ep31 ; ! tile is entire patch its = grid%sp32 ; ite = grid%ep32 ; ! tile is entire patch jts = grid%sp33 ; jte = grid%ep33 ; ! tile is entire patch CASE ( DATA_ORDER_XYZ ) ids = grid%sd31 ; ide = grid%ed31 ; jds = grid%sd32 ; jde = grid%ed32 ; kds = grid%sd33 ; kde = grid%ed33 ; ims = grid%sm31 ; ime = grid%em31 ; jms = grid%sm32 ; jme = grid%em32 ; kms = grid%sm33 ; kme = grid%em33 ; its = grid%sp31 ; ite = grid%ep31 ; ! tile is entire patch jts = grid%sp32 ; jte = grid%ep32 ; ! tile is entire patch kts = grid%sp33 ; kte = grid%ep33 ; ! tile is entire patch CASE ( DATA_ORDER_XZY ) ids = grid%sd31 ; ide = grid%ed31 ; kds = grid%sd32 ; kde = grid%ed32 ; jds = grid%sd33 ; jde = grid%ed33 ; ims = grid%sm31 ; ime = grid%em31 ; kms = grid%sm32 ; kme = grid%em32 ; jms = grid%sm33 ; jme = grid%em33 ; its = grid%sp31 ; ite = grid%ep31 ; ! tile is entire patch kts = grid%sp32 ; kte = grid%ep32 ; ! tile is entire patch jts = grid%sp33 ; jte = grid%ep33 ; ! tile is entire patch END SELECT ! Initialize what soil temperature and moisture is available. write(0,*) 'dum3d I allocs: ', ids,ide-1 write(0,*) 'dum3d J allocs: ', jds,jde-1 write(0,*) 'dum3d K allocs: ', kds,kde-1 flag_st000010 = 0 flag_st010040 = 0 flag_st040100 = 0 flag_st100200 = 0 flag_sm000010 = 0 flag_sm010040 = 0 flag_sm040100 = 0 flag_sm100200 = 0 flag_st010200 = 0 flag_sm010200 = 0 flag_soilt010 = 0 flag_soilt040 = 0 flag_soilt100 = 0 flag_soilt200 = 0 flag_soilm010 = 0 flag_soilm040 = 0 flag_soilm100 = 0 flag_soilm200 = 0 flag_sst = 0 flag_toposoil = 0 ! How many soil levels have we found? Well, right now, none. num_st_levels_input = 0 num_sm_levels_input = 0 st_levels_input = -1 sm_levels_input = -1 ! Get the space for the data if this is the first time here. write(6,*) 'enter read_si...first_time_in:: ', first_time_in IF ( first_time_in ) THEN CLOSE(12) OPEN ( FILE = 'real_input_nm.global.metadata' , & UNIT = 12 , & STATUS = 'OLD' , & ACCESS = 'SEQUENTIAL' , & FORM = 'UNFORMATTED' , & IOSTAT = ok_open ) IF ( ok_open .NE. 0 ) THEN PRINT '(A)','You asked for WRF SI data, but no real_input_nm.global.metadata file exists.' STOP 'No_real_input_nm.global.metadata_exists' END IF READ(12) global_meta%simulation_name, global_meta%user_desc, & global_meta%si_version, global_meta%analysis_version, & global_meta%wrf_version, global_meta%post_version REWIND (12) IF ( global_meta%si_version .EQ. 1 ) THEN READ(12) global_meta%simulation_name, global_meta%user_desc, & global_meta%si_version, global_meta%analysis_version, & global_meta%wrf_version, global_meta%post_version, & global_meta%map_projection, global_meta%moad_known_lat, & global_meta%moad_known_lon, global_meta%moad_known_loc, & global_meta%moad_stand_lats, global_meta%moad_stand_lons, & global_meta%moad_delta_x, global_meta%moad_delta_y, & global_meta%horiz_stagger_type, global_meta%num_stagger_xy, & global_meta%stagger_dir_x_old, global_meta%stagger_dir_y_old, & global_meta%num_stagger_z, global_meta%stagger_dir_z, & global_meta%vertical_coord, global_meta%num_domains, & global_meta%init_date, global_meta%init_time, & global_meta%end_date, global_meta%end_time ELSE IF ( global_meta%si_version .EQ. 2 ) THEN READ(12) global_meta%simulation_name, global_meta%user_desc, & global_meta%si_version, global_meta%analysis_version, & global_meta%wrf_version, global_meta%post_version, & global_meta%map_projection, global_meta%moad_known_lat, & global_meta%moad_known_lon, global_meta%moad_known_loc, & global_meta%moad_stand_lats, global_meta%moad_stand_lons, & global_meta%moad_delta_x, global_meta%moad_delta_y, & global_meta%horiz_stagger_type, global_meta%num_stagger_xy, & global_meta%stagger_dir_x_new, global_meta%stagger_dir_y_new, & global_meta%num_stagger_z, global_meta%stagger_dir_z, & global_meta%vertical_coord, global_meta%num_domains, & global_meta%init_date, global_meta%init_time, & global_meta%end_date, global_meta%end_time , & global_meta%lu_source, global_meta%lu_water, global_meta%lu_ice END IF CLOSE (12) print *,'GLOBAL METADATA' print *,'global_meta%simulation_name', global_meta%simulation_name print *,'global_meta%user_desc', global_meta%user_desc print *,'global_meta%user_desc', global_meta%user_desc print *,'global_meta%si_version', global_meta%si_version print *,'global_meta%analysis_version', global_meta%analysis_version print *,'global_meta%wrf_version', global_meta%wrf_version print *,'global_meta%post_version', global_meta%post_version print *,'global_meta%map_projection', global_meta%map_projection print *,'global_meta%moad_known_lat', global_meta%moad_known_lat print *,'global_meta%moad_known_lon', global_meta%moad_known_lon print *,'global_meta%moad_known_loc', global_meta%moad_known_loc print *,'global_meta%moad_stand_lats', global_meta%moad_stand_lats print *,'global_meta%moad_stand_lons', global_meta%moad_stand_lons print *,'global_meta%moad_delta_x', global_meta%moad_delta_x print *,'global_meta%moad_delta_y', global_meta%moad_delta_y print *,'global_meta%horiz_stagger_type', global_meta%horiz_stagger_type print *,'global_meta%num_stagger_xy', global_meta%num_stagger_xy IF ( global_meta%si_version .EQ. 1 ) THEN print *,'global_meta%stagger_dir_x', global_meta%stagger_dir_x_old print *,'global_meta%stagger_dir_y', global_meta%stagger_dir_y_old ELSE IF ( global_meta%si_version .EQ. 2 ) THEN print *,'global_meta%stagger_dir_x', global_meta%stagger_dir_x_new print *,'global_meta%stagger_dir_y', global_meta%stagger_dir_y_new END IF print *,'global_meta%num_stagger_z', global_meta%num_stagger_z print *,'global_meta%stagger_dir_z', global_meta%stagger_dir_z print *,'global_meta%vertical_coord', global_meta%vertical_coord print *,'global_meta%num_domains', global_meta%num_domains print *,'global_meta%init_date', global_meta%init_date print *,'global_meta%init_time', global_meta%init_time print *,'global_meta%end_date', global_meta%end_date print *,'global_meta%end_time', global_meta%end_time IF ( global_meta%si_version .EQ. 2 ) THEN print *,'global_meta%lu_source', global_meta%lu_source print *,'global_meta%lu_water', global_meta%lu_water print *,'global_meta%lu_ice', global_meta%lu_ice END IF print *,' ' ! 1D - this is the definition of the vertical coordinate. IF (.NOT. ALLOCATED (DETA_in)) ALLOCATE(DETA_in(kds:kde-1)) IF (.NOT. ALLOCATED (AETA_in)) ALLOCATE(AETA_in(kds:kde-1)) IF (.NOT. ALLOCATED (ETAX_in)) ALLOCATE(ETAX_in(kds:kde)) IF (.NOT. ALLOCATED (DETA1_in)) ALLOCATE(DETA1_in(kds:kde-1)) IF (.NOT. ALLOCATED (AETA1_in)) ALLOCATE(AETA1_in(kds:kde-1)) IF (.NOT. ALLOCATED (ETA1_in)) ALLOCATE(ETA1_in(kds:kde)) IF (.NOT. ALLOCATED (DETA2_in)) ALLOCATE(DETA2_in(kds:kde-1)) IF (.NOT. ALLOCATED (AETA2_in)) ALLOCATE(AETA2_in(kds:kde-1)) IF (.NOT. ALLOCATED (ETA2_in)) ALLOCATE(ETA2_in(kds:kde)) IF (.NOT. ALLOCATED (DFL_in)) ALLOCATE(DFL_in(kds:kde)) ! 3D met IF (.NOT. ALLOCATED (u_input) ) ALLOCATE ( u_input(its:ite,jts:jte,kts:kte) ) IF (.NOT. ALLOCATED (v_input) ) ALLOCATE ( v_input(its:ite,jts:jte,kts:kte) ) IF (.NOT. ALLOCATED (q_input) ) ALLOCATE ( q_input(its:ite,jts:jte,kts:kte) ) IF (.NOT. ALLOCATED (t_input) ) ALLOCATE ( t_input(its:ite,jts:jte,kts:kte) ) IF (.NOT. ALLOCATED (htm_in) ) ALLOCATE ( htm_in(its:ite,jts:jte,kts:kte) ) IF (.NOT. ALLOCATED (vtm_in) ) ALLOCATE ( vtm_in(its:ite,jts:jte,kts:kte) ) ! 2D pressure fields IF (.NOT. ALLOCATED (pmsl) ) ALLOCATE ( pmsl(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (psfc_in) ) ALLOCATE ( psfc_in(its:ite,jts:jte) ) ! 2D - for LSM, these are computed from the categorical precentage values. ! 2D - for LSM, the various soil temperature and moisture levels that are available. IF (.NOT. ALLOCATED (st_inputx)) ALLOCATE (st_inputx(its:ite,jts:jte,num_st_levels_alloc)) IF (.NOT. ALLOCATED (sm_inputx)) ALLOCATE (sm_inputx(its:ite,jts:jte,num_st_levels_alloc)) IF (.NOT. ALLOCATED (sw_inputx)) ALLOCATE (sw_inputx(its:ite,jts:jte,num_st_levels_alloc)) IF (.NOT. ALLOCATED (soilt010_input) ) ALLOCATE ( soilt010_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (soilt040_input) ) ALLOCATE ( soilt040_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (soilt100_input) ) ALLOCATE ( soilt100_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (soilt200_input) ) ALLOCATE ( soilt200_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (soilm010_input) ) ALLOCATE ( soilm010_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (soilm040_input) ) ALLOCATE ( soilm040_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (soilm100_input) ) ALLOCATE ( soilm100_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (soilm200_input) ) ALLOCATE ( soilm200_input(its:ite,jts:jte) ) IF (.NOT. ALLOCATED (lat_wind) ) ALLOCATE (lat_wind(its:ite,jts:jte)) IF (.NOT. ALLOCATED (lon_wind) ) ALLOCATE (lon_wind(its:ite,jts:jte)) ! Local arrays IF (.NOT. ALLOCATED (dum2d) ) ALLOCATE (dum2d(IDS:IDE-1,JDS:JDE-1)) IF (.NOT. ALLOCATED (idum2d) ) ALLOCATE (idum2d(IDS:IDE-1,JDS:JDE-1)) IF (.NOT. ALLOCATED (dum3d) ) ALLOCATE (dum3d(IDS:IDE-1,JDS:JDE-1,KDS:KDE-1)) END IF CLOSE(13) write(6,*) 'file_date_string: ', file_date_string write(6,*) 'opening real_input_nm.d01.'//file_date_string//' as unit 13' OPEN ( FILE = 'real_input_nm.d01.'//file_date_string , & UNIT = 13 , & STATUS = 'OLD' , & ACCESS = 'SEQUENTIAL' , & FORM = 'UNFORMATTED' ) IF ( global_meta%si_version .EQ. 1 ) THEN READ (13) dom_meta%id,dom_meta%parent_id,dom_meta%dyn_init_src,& dom_meta%static_init_src, dom_meta%vt_date, dom_meta%vt_time, & dom_meta%origin_parent_x, dom_meta%origin_parent_y, & dom_meta%ratio_to_parent, dom_meta%delta_x, dom_meta%delta_y, & dom_meta%top_level, dom_meta%origin_parent_z, & dom_meta%corner_lats_old, dom_meta%corner_lons_old, dom_meta%xdim, & dom_meta%ydim, dom_meta%zdim ELSE IF ( global_meta%si_version .EQ. 2 ) THEN READ (13) dom_meta%id,dom_meta%parent_id,dom_meta%dyn_init_src,& dom_meta%static_init_src, dom_meta%vt_date, dom_meta%vt_time, & dom_meta%origin_parent_x, dom_meta%origin_parent_y, & dom_meta%ratio_to_parent, dom_meta%delta_x, dom_meta%delta_y, & dom_meta%top_level, dom_meta%origin_parent_z, & dom_meta%corner_lats_new, dom_meta%corner_lons_new, dom_meta%xdim, & dom_meta%ydim, dom_meta%zdim END IF print *,'DOMAIN METADATA' print *,'dom_meta%id=', dom_meta%id print *,'dom_meta%parent_id=', dom_meta%parent_id print *,'dom_meta%dyn_init_src=', dom_meta%dyn_init_src print *,'dom_meta%static_init_src=', dom_meta%static_init_src print *,'dom_meta%vt_date=', dom_meta%vt_date print *,'dom_meta%vt_time=', dom_meta%vt_time print *,'dom_meta%origin_parent_x=', dom_meta%origin_parent_x print *,'dom_meta%origin_parent_y=', dom_meta%origin_parent_y print *,'dom_meta%ratio_to_parent=', dom_meta%ratio_to_parent print *,'dom_meta%delta_x=', dom_meta%delta_x print *,'dom_meta%delta_y=', dom_meta%delta_y print *,'dom_meta%top_level=', dom_meta%top_level print *,'dom_meta%origin_parent_z=', dom_meta%origin_parent_z IF ( global_meta%si_version .EQ. 1 ) THEN print *,'dom_meta%corner_lats=', dom_meta%corner_lats_old print *,'dom_meta%corner_lons=', dom_meta%corner_lons_old ELSE IF ( global_meta%si_version .EQ. 2 ) THEN print *,'dom_meta%corner_lats=', dom_meta%corner_lats_new print *,'dom_meta%corner_lons=', dom_meta%corner_lons_new END IF print *,'dom_meta%xdim=', dom_meta%xdim print *,'dom_meta%ydim=', dom_meta%ydim print *,'dom_meta%zdim=', dom_meta%zdim print *,' ' ! A simple domain size test. !! relax constraint, as model namelist has +1 for i and j, while !! si data has true dimensions IF ( abs(dom_meta%xdim - (ide-1)) .gt. 1 & .OR. abs(dom_meta%ydim - (jde-1)) .gt. 1 & .OR. abs(dom_meta%zdim - (kde-1)) .gt. 1) THEN PRINT '(A)','Namelist does not match the input data.' PRINT '(A,3I5,A)','Namelist dimensions =',ide-1,jde-1,kde-1,'.' PRINT '(A,3I5,A)','Input data dimensions =',dom_meta%xdim,dom_meta%ydim,dom_meta%zdim,'.' STOP 'Wrong_data_size' END IF ! How about the grid distance? Is it the same as in the namelist? IF ( global_meta%si_version .EQ. 1 ) THEN CALL nl_set_cen_lat ( grid%id , ( dom_meta%corner_lats_old(1,1) + dom_meta%corner_lats_old(2,1) + & dom_meta%corner_lats_old(3,1) + dom_meta%corner_lats_old(4,1) ) * 0.25 ) ELSE IF ( ( global_meta%si_version .EQ. 2 ) .AND. ( global_meta%moad_known_loc(1:6) .EQ. 'CENTER' ) ) THEN CALL nl_set_cen_lat ( grid%id , global_meta%moad_known_lat ) ELSE IF ( global_meta%si_version .EQ. 2 ) THEN CALL nl_set_cen_lat ( grid%id , ( dom_meta%corner_lats_new(1,1) + dom_meta%corner_lats_new(2,1) + & dom_meta%corner_lats_new(3,1) + dom_meta%corner_lats_new(4,1) ) * 0.25 ) END IF !!! might be trouble here CALL nl_set_cen_lon ( grid%id , global_meta%moad_stand_lons(1) ) !!!!! write(6,*) 'set_cen_lat... global_meta%moad_stand_lats(1): ', global_meta%moad_stand_lats(1) CALL nl_set_cen_lat ( grid%id , global_meta%moad_stand_lats(1) ) !!!!! CALL nl_set_truelat1 ( grid%id , global_meta%moad_stand_lats(1) ) CALL nl_set_truelat2 ( grid%id , global_meta%moad_stand_lats(2) ) pt = dom_meta%top_level IF ( global_meta%map_projection(1:17) .EQ. 'LAMBERT CONFORMAL' ) THEN map_proj = 1 ELSE IF ( global_meta%map_projection(1:19) .EQ. 'POLAR STEREOGRAPHIC' ) THEN map_proj = 2 ELSE IF ( global_meta%map_projection(1: 8) .EQ. 'MERCATOR' ) THEN map_proj = 3 ELSE IF ( global_meta%map_projection(1:14) .EQ. 'ROTATED LATLON' ) THEN map_proj = 203 !? ELSE PRINT '(A,A,A)','Undefined map projection: ',TRIM(global_meta%map_projection(1:20)),'.' STOP 'Undefined_map_proj_si' END IF CALL nl_set_map_proj ( grid%id , map_proj ) write(0,*) 'global_meta%si_version: ', global_meta%si_version write(0,*) 'global_meta%lu_source: ', global_meta%lu_source write(0,*) 'global_meta%lu_water: ', global_meta%lu_water IF ( global_meta%si_version .EQ. 1 ) THEN CALL nl_set_mminlu (grid%id, 'USGS' ) CALL nl_set_iswater (grid%id, 16 ) ELSE IF ( global_meta%si_version .EQ. 2 ) THEN CALL nl_set_mminlu ( grid%id, global_meta%lu_source ) CALL nl_set_iswater (grid%id, global_meta%lu_water ) CALL nl_set_isice (grid%id, global_meta%lu_ice ) END IF CALL nl_set_gmt (grid%id, dom_meta%vt_time / 3600. ) CALL nl_set_julyr (grid%id, dom_meta%vt_date / 1000 ) CALL nl_set_julday (grid%id, dom_meta%vt_date - ( dom_meta%vt_date / 1000 ) * 1000 ) write(6,*) 'start reading from unit 13' read_all_the_data : DO READ (13,IOSTAT=OK) var_info%name, var_info%units, & var_info%description, var_info%domain_id, var_info%ndim, & var_info%dim_val, var_info%dim_desc, var_info%start_index, & var_info%stop_index, var_info%h_stagger_index, var_info%v_stagger_index,& var_info%array_order, var_info%field_type, var_info%field_source_prog, & var_info%source_desc, var_info%field_time_type, var_info%vt_date_start, & var_info%vt_time_start, var_info%vt_date_stop, var_info%vt_time_stop IF ( OK .NE. 0 ) THEN PRINT '(A,A,A)','End of file found for real_input_nm.d01.',file_date_string,'.' EXIT read_all_the_data END IF ! print *,'VARIABLE METADATA' PRINT '(A,A)','var_info%name=', var_info%name ! print *,'var_info%units=', var_info%units ! print *,'var_info%description=', var_info%description ! print *,'var_info%domain_id=', var_info%domain_id ! print *,'var_info%ndim=', var_info%ndim ! print *,'var_info%dim_val=', var_info%dim_val ! print *,'var_info%dim_desc=', var_info%dim_desc ! print *,'var_info%start_index=', var_info%start_index ! print *,'var_info%stop_index=', var_info%stop_index ! print *,'var_info%h_stagger_index=', var_info%h_stagger_index ! print *,'var_info%v_stagger_index=', var_info%v_stagger_index ! print *,'var_info%array_order=', var_info%array_order ! print *,'var_info%field_type=', var_info%field_type ! print *,'var_info%field_source_prog=', var_info%field_source_prog ! print *,'var_info%source_desc=', var_info%source_desc ! print *,'var_info%field_time_type=', var_info%field_time_type ! print *,'var_info%vt_date_start=', var_info%vt_date_start ! print *,'var_info%vt_time_start=', var_info%vt_time_start ! print *,'var_info%vt_date_stop=', var_info%vt_date_stop ! print *,'var_info%vt_time_stop=', var_info%vt_time_stop JMAX=min(JDE-1,JTE) IMAX=min(IDE-1,ITE) ! 3D meteorological fields. write(0,*)' read_si var_info%name=',var_info%name(1:8) IF ( var_info%name(1:8) .EQ. 'T ' ) THEN READ (13) dum3d do k=kts,kte-1 do j=jts,JMAX do i=its,IMAX t_input(i,j,k)=dum3d(i,j,k) enddo enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'U ' ) THEN READ (13) dum3d do k=kts,kte-1 do j=jts,JMAX do i=its,IMAX u_input(i,j,k)=dum3d(i,j,k) enddo enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'V ' ) THEN READ (13) dum3d do k=kts,kte-1 do j=jts,JMAX do i=its,IMAX v_input(i,j,k)=dum3d(i,j,k) enddo enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'Q ' ) THEN READ (13) dum3d do k=kts,kte-1 do j=jts,JMAX do i=its,IMAX q_input(i,j,k)=dum3d(i,j,k) enddo enddo enddo ! 3D LSM fields. Don't know the 3rd dimension until we read it in. ELSE IF ( var_info%name(1:8) .EQ. 'LANDUSEF' ) THEN IF ( ( first_time_in ) .AND. ( .NOT. ALLOCATED ( landuse_frac_input) ) ) THEN ALLOCATE (landuse_frac_input(its:ite,jts:jte,var_info%dim_val(3)) ) END IF READ (13) (((dum3d(i,j,k),i=ids,ide-1),j=jds,jde-1),k=1,var_info%dim_val(3)) do k=1,var_info%dim_val(3) do j=jts,JMAX do i=its,IMAX landuse_frac_input(i,j,k)=dum3d(i,j,k) enddo enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SOILCTOP' ) THEN IF ( ( first_time_in ) .AND. ( .NOT. ALLOCATED ( soil_top_cat_input) ) ) THEN ALLOCATE (soil_top_cat_input(its:ite,jts:jte,var_info%dim_val(3)) ) END IF READ (13) (((dum3d(i,j,k),i=ids,ide-1),j=jds,jde-1),k=1,var_info%dim_val(3)) do k=1,var_info%dim_val(3) do j=jts,JMAX do i=its,IMAX soil_top_cat_input(i,j,k)=dum3d(i,j,k) enddo enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SOILCBOT' ) THEN IF ( ( first_time_in ) .AND. ( .NOT. ALLOCATED ( soil_bot_cat_input) ) ) THEN ALLOCATE (soil_bot_cat_input(its:ite,jts:jte,var_info%dim_val(3)) ) END IF READ (13) (((dum3d(i,j,k),i=ids,ide-1),j=jds,jde-1),k=1,var_info%dim_val(3)) do k=1,var_info%dim_val(3) do j=jts,JMAX do i=its,IMAX soil_bot_cat_input(i,j,k)=dum3d(i,j,k) enddo enddo enddo ! 2D dry pressure minus ptop. ELSE IF ( var_info%name(1:8) .EQ. 'PD ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%pd(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'PSFC ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX psfc_in(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'PMSL ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX pmsl(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'PDTOP ' ) THEN READ (13) grid%pdtop ELSE IF ( var_info%name(1:8) .EQ. 'PT ' ) THEN READ (13) grid%pt ! 2D surface fields. ELSE IF ( var_info%name(1:8) .eq. 'GLAT ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%glat(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .eq. 'GLON ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%glon(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .eq. 'LAT_V ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX lat_wind(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .eq. 'LON_V ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX lon_wind(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'ST000010' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%st000010(i,j)=dum2d(i,j) enddo enddo flag_st000010 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = grid%st000010(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'ST010040' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%st010040(i,j)=dum2d(i,j) enddo enddo flag_st010040 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = grid%st010040(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'ST040100' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%st040100(i,j)=dum2d(i,j) enddo enddo flag_st040100 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = grid%st040100(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'ST100200' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%st100200(i,j)=dum2d(i,j) enddo enddo flag_st100200 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = grid%st100200(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'ST010200' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%st010200(i,j)=dum2d(i,j) enddo enddo flag_st010200 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = grid%st010200(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SM000010' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%sm000010(i,j)=dum2d(i,j) enddo enddo flag_sm000010 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = grid%sm000010(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SM010040' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%sm010040(i,j)=dum2d(i,j) enddo enddo flag_sm010040 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = grid%sm010040(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SM040100' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%sm040100(i,j)=dum2d(i,j) enddo enddo flag_sm040100 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = grid%sm040100(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SM100200' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%sm100200(i,j)=dum2d(i,j) enddo enddo flag_sm100200 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = grid%sm100200(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SM010200' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%sm010200(i,j)=dum2d(i,j) enddo enddo flag_sm010200 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int2(var_info%name(3:8)) do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = grid%sm010200(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SOILT010' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilt010_input(i,j)=dum2d(i,j) enddo enddo flag_soilt010 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int1(var_info%name(6:8)) !mp st_inputx(:,:,num_st_levels_input + 1) = soilt010_input do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = soilt010_input(I,J) enddo enddo write(6,*) 'num_st_levels_input=',num_st_levels_input ELSE IF ( var_info%name(1:8) .EQ. 'SOILT040' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilt040_input(i,j)=dum2d(i,j) enddo enddo flag_soilt040 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int1(var_info%name(6:8)) !mp st_inputx(:,:,num_st_levels_input + 1) = soilt040_input do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = soilt040_input(I,J) enddo enddo write(6,*) 'num_st_levels_input=',num_st_levels_input ELSE IF ( var_info%name(1:8) .EQ. 'SOILT100' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilt100_input(i,j)=dum2d(i,j) enddo enddo flag_soilt100 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int1(var_info%name(6:8)) !mp st_inputx(:,:,num_st_levels_input + 1) = soilt100_input do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = soilt100_input(I,J) enddo enddo write(6,*) 'num_st_levels_input=',num_st_levels_input ELSE IF ( var_info%name(1:8) .EQ. 'SOILT200' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilt200_input(i,j)=dum2d(i,j) enddo enddo flag_soilt200 = 1 num_st_levels_input = num_st_levels_input + 1 st_levels_input(num_st_levels_input) = char2int1(var_info%name(6:8)) !mp st_inputx(:,:,num_st_levels_input + 1) = soilt200_input do j=jts,JMAX do i=its,IMAX st_inputx(I,J,num_st_levels_input + 1) = soilt200_input(I,J) enddo enddo write(6,*) 'num_st_levels_input=',num_st_levels_input ELSE IF ( var_info%name(1:8) .EQ. 'SOILM010' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilm010_input(i,j)=dum2d(i,j) enddo enddo flag_soilm010 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int1(var_info%name(6:8)) !mp sm_inputx(:,:,num_sm_levels_input + 1) = soilm010_input do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = soilm010_input(I,J) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SOILM040' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilm040_input(i,j)=dum2d(i,j) enddo enddo flag_soilm040 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int1(var_info%name(6:8)) !mp sm_inputx(:,:,num_sm_levels_input + 1) = soilm040_input do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = soilm040_input(I,J) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SOILM100' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilm100_input(i,j)=dum2d(i,j) enddo enddo flag_soilm100 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int1(var_info%name(6:8)) !mp sm_inputx(:,:,num_sm_levels_input + 1) = soilm100_input do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = soilm100_input(I,J) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SOILM200' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX soilm200_input(i,j)=dum2d(i,j) enddo enddo flag_soilm200 = 1 num_sm_levels_input = num_sm_levels_input + 1 sm_levels_input(num_sm_levels_input) = char2int1(var_info%name(6:8)) !mp sm_inputx(:,:,num_sm_levels_input + 1) = soilm200_input do j=jts,JMAX do i=its,IMAX sm_inputx(I,J,num_sm_levels_input + 1) = soilm200_input(I,J) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SEAICE ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%xice(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'WEASD ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%weasd(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'CANWAT ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%canwat(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'LANDMASK' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%landmask(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SKINTEMP' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%nmm_tsk(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'TGROUND ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%tg(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SOILTB ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%soiltb(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SST ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%sst(i,j)=dum2d(i,j) enddo enddo flag_sst = 1 ELSE IF ( var_info%name(1:8) .EQ. 'GREENFRC' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%vegfrc(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'ISLOPE ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%islope(i,j)=nint(dum2d(i,j)) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'GREENMAX' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%greenmax(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'GREENMIN' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%greenmin(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'FIS ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%fis(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'Z0 ' ) THEN ! ELSE IF ( var_info%name(1:8) .EQ. 'STDEV ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%z0(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'CMC ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%cmc(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'HTM ' ) THEN READ (13) dum3d do k=kts,kte-1 do j=jts,JMAX do i=its,IMAX htm_in(i,j,k)=dum3d(i,j,k) enddo enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'VTM ' ) THEN READ (13) dum3d do k=kts,kte-1 do j=jts,JMAX do i=its,IMAX vtm_in(i,j,k)=dum3d(i,j,k) enddo enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'SM ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%sm(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'ALBASE ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%albase(i,j)=dum2d(i,j) enddo enddo ELSE IF ( var_info%name(1:8) .EQ. 'MXSNAL ' ) THEN READ (13) dum2d do j=jts,JMAX do i=its,IMAX grid%mxsnal(i,j)=dum2d(i,j) enddo enddo ! 1D vertical coordinate. ELSE IF ( var_info%name(1:8) .EQ. 'DETA ' ) THEN READ(13) DETA_in ELSE IF ( var_info%name(1:8) .EQ. 'DETA1 ' ) THEN READ(13) DETA1_in ELSE IF ( var_info%name(1:8) .EQ. 'DETA2 ' ) THEN READ(13) DETA2_in ELSE IF ( var_info%name(1:8) .EQ. 'ETAX ' ) THEN READ(13) ETAX_in ELSE IF ( var_info%name(1:8) .EQ. 'ETA1 ' ) THEN READ(13) ETA1_in ELSE IF ( var_info%name(1:8) .EQ. 'ETA2 ' ) THEN READ(13) ETA2_in ELSE IF ( var_info%name(1:8) .EQ. 'AETA ' ) THEN READ(13) AETA_in ELSE IF ( var_info%name(1:8) .EQ. 'AETA1 ' ) THEN READ(13) AETA1_in ELSE IF ( var_info%name(1:8) .EQ. 'AETA2 ' ) THEN READ(13) AETA2_in ELSE IF ( var_info%name(1:8) .EQ. 'DFL ' ) THEN READ(13) DFL_in ! ELSE IF ( var_info%name(1:8) .EQ. 'ETAPHALF' ) THEN ! READ (13) etahalf ! ELSE IF ( var_info%name(1:8) .EQ. 'ETAPFULL' ) THEN ! READ (13) etafull ! wrong input data. ELSE IF ( var_info%name(1:8) .EQ. 'ZETAFULL' ) THEN PRINT '(A)','Oops, you put in the height data.' STOP 'this_is_mass_not_height' ! Stuff that we do not want or need is just skipped over. ELSE print *,'------------------> skipping ', var_info%name(1:8) READ (13) dummy END IF END DO read_all_the_data CLOSE (13) first_time_in = .FALSE. !new sw_inputx=0. !new do k=kts,kte-1 do j=jts,JMAX do i=its,IMAX grid%U(I,J,K)=U_input(I,J,K) grid%V(I,J,K)=V_input(I,J,K) grid%T(I,J,K)=T_input(I,J,K) grid%Q(I,J,K)=Q_input(I,J,K) enddo enddo enddo write(0,*) 'size sw_input: ', size(sw_input,dim=1),size(sw_input,dim=2),size(sw_input,dim=3) write(0,*) 'size sw_inputx: ', size(sw_inputx,dim=1),size(sw_inputx,dim=2),size(sw_inputx,dim=3) sw_input=0. write(0,*) 'maxval st_inputx(1): ', maxval(st_input(:,:,1)) write(0,*) 'maxval st_inputx(2): ', maxval(st_input(:,:,2)) write(0,*) 'maxval st_inputx(3): ', maxval(st_input(:,:,3)) write(0,*) 'maxval st_inputx(4): ', maxval(st_input(:,:,4)) do J=JTS,min(JDE-1,JTE) do K=1,num_st_levels_alloc do I=ITS,min(IDE-1,ITE) st_input(I,K,J)=st_inputx(I,J,K) sm_input(I,K,J)=sm_inputx(I,J,K) sw_input(I,K,J)=sw_inputx(I,J,K) enddo enddo enddo write(0,*) 'maxval st_input(1): ', maxval(st_input(:,1,:)) write(0,*) 'maxval st_input(2): ', maxval(st_input(:,2,:)) write(0,*) 'maxval st_input(3): ', maxval(st_input(:,3,:)) write(0,*) 'maxval st_input(4): ', maxval(st_input(:,4,:)) num_veg_cat = SIZE ( grid%landusef , DIM=2 ) num_soil_top_cat = SIZE ( grid%soilctop , DIM=2 ) num_soil_bot_cat = SIZE ( grid%soilcbot , DIM=2 ) do J=JTS,min(JDE-1,JTE) do K=1,num_soil_top_cat do I=ITS,min(IDE-1,ITE) grid%SOILCTOP(I,K,J)=soil_top_cat_input(I,J,K) grid%SOILCTOP_gc(I,J,K)=soil_top_cat_input(I,J,K) enddo enddo enddo do J=JTS,min(JDE-1,JTE) do K=1,num_soil_bot_cat do I=ITS,min(IDE-1,ITE) grid%SOILCBOT(I,K,J)=soil_bot_cat_input(I,J,K) grid%SOILCBOT_gc(I,J,K)=soil_bot_cat_input(I,J,K) enddo enddo enddo do J=JTS,min(JDE-1,JTE) do K=1,num_veg_cat do I=ITS,min(IDE-1,ITE) grid%LANDUSEF(I,K,J)=landuse_frac_input(I,J,K) grid%LANDUSEF_gc(I,J,K)=landuse_frac_input(I,J,K) enddo enddo enddo do K=KDS,KDE grid%ETAX(K)=ETAX_in(KDE-K+1) grid%ETA1(K)=ETA1_in(KDE-K+1) grid%ETA2(K)=ETA2_in(KDE-K+1) grid%DFL(K)=DFL_in(KDE-K+1) enddo do K=KDS,KDE-1 grid%DETA(K)=DETA_in(KDE-K) grid%DETA1(K)=DETA1_in(KDE-K) grid%DETA2(K)=DETA2_in(KDE-K) grid%AETA(K)=AETA_in(KDE-K) grid%AETA1(K)=AETA1_in(KDE-K) grid%AETA2(K)=AETA2_in(KDE-K) enddo END SUBROUTINE read_si END MODULE module_si_io_nmm