!------------------------------------------------------------------- SUBROUTINE start_domain_em ( grid, allowed_to_read & ! Actual arguments generated from Registry # include "dummy_new_args.inc" ! ) USE module_domain, ONLY : domain, wrfu_timeinterval, get_ijk_from_grid, & domain_setgmtetc USE module_state_description USE module_model_constants USE module_bc, ONLY : boundary_condition_check, set_physical_bc2d USE module_bc_em USE module_configure, ONLY : grid_config_rec_type USE module_tiles, ONLY : set_tiles USE module_dm, ONLY : wrf_dm_min_real USE module_physics_init #ifdef WRF_CHEM USE module_aerosols_sorgam, ONLY: sum_pm_sorgam USE module_gocart_aerosols, ONLY: sum_pm_gocart USE module_mosaic_driver, ONLY: sum_pm_mosaic #endif !!debug !USE module_compute_geop USE module_model_constants IMPLICIT NONE ! Input data. TYPE (domain) :: grid LOGICAL , INTENT(IN) :: allowed_to_read ! Definitions of dummy arguments to this routine (generated from Registry). # include "dummy_new_decl.inc" ! Structure that contains run-time configuration (namelist) data for domain TYPE (grid_config_rec_type) :: config_flags ! Local data INTEGER :: & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & its, ite, jts, jte, kts, kte, & ij,i,j,k,ii,jj,kk,loop,error,l INTEGER :: imsx, imex, jmsx, jmex, kmsx, kmex, & ipsx, ipex, jpsx, jpex, kpsx, kpex, & imsy, imey, jmsy, jmey, kmsy, kmey, & ipsy, ipey, jpsy, jpey, kpsy, kpey INTEGER :: i_m REAL :: p00, t00, a, p_surf, pd_surf #ifdef WRF_CHEM REAL RGASUNIV ! universal gas constant [ J/mol-K ] PARAMETER ( RGASUNIV = 8.314510 ) REAL,DIMENSION(grid%sm31:grid%em31,grid%sm32:grid%em32,grid%sm33:grid%em33) :: & z_at_w,convfac REAL :: tempfac #endif REAL :: qvf1, qvf2, qvf REAL :: MPDT REAL :: spongeweight LOGICAL :: first_trip_for_this_domain, start_of_simulation #ifndef WRF_CHEM REAL,ALLOCATABLE,DIMENSION(:,:,:) :: cldfra_old #endif REAL :: lat1 , lat2 , lat3 , lat4 REAL :: lon1 , lon2 , lon3 , lon4 INTEGER :: num_points_lat_lon , iloc , jloc CHARACTER (LEN=132) :: message TYPE(WRFU_TimeInterval) :: stepTime REAL, DIMENSION(:,:), ALLOCATABLE :: clat_glob INTEGER :: idex, jdex CALL get_ijk_from_grid ( grid , & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & imsx, imex, jmsx, jmex, kmsx, kmex, & ipsx, ipex, jpsx, jpex, kpsx, kpex, & imsy, imey, jmsy, jmey, kmsy, kmey, & ipsy, ipey, jpsy, jpey, kpsy, kpey ) kts = kps ; kte = kpe ! note that tile is entire patch its = ips ; ite = ipe ! note that tile is entire patch jts = jps ; jte = jpe ! note that tile is entire patch #ifndef WRF_CHEM ALLOCATE(CLDFRA_OLD(IMS:IME,KMS:KME,JMS:JME),STAT=I) ; CLDFRA_OLD = 0. #endif CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags ) IF ( ( MOD (ide-ids,config_flags%parent_grid_ratio) .NE. 0 ) .OR. & ( MOD (jde-jds,config_flags%parent_grid_ratio) .NE. 0 ) ) THEN WRITE(message, FMT='("Nested dimensions are illegal for domain ",I2,": Both & &MOD(",I4,"-",I1,",",I2,") and MOD(",I4,"-",I1,",",I2,") must = 0" )') & grid%id,ide,ids,config_flags%parent_grid_ratio,jde,jds,config_flags%parent_grid_ratio CALL wrf_error_fatal ( message ) END IF IF ( config_flags%polar ) THEN !write(0,*)__FILE__,__LINE__,' clat ',ips,ipe,jps,jpe !do j = jps,jpe !write(0,*)__FILE__,__LINE__,' clat ',ids,j,grid%clat(ips,j) !enddo #ifdef DM_PARALLEL ! WARNING: this might present scaling issues on very large numbers of processors ALLOCATE( clat_glob(ids:ide,jds:jde) ) CALL wrf_patch_to_global_real ( grid%clat, clat_glob, grid%domdesc, 'xy', 'xy', & ids, ide, jds, jde, 1, 1, & ims, ime, jms, jme, 1, 1, & its, ite, jts, jte, 1, 1 ) CALL wrf_dm_bcast_real ( clat_glob , (ide-ids+1)*(jde-jds+1) ) grid%clat_xxx(ipsx:ipex,jpsx:jpex) = clat_glob(ipsx:ipex,jpsx:jpex) DEALLOCATE( clat_glob ) #endif ENDIF ! here we check to see if the boundary conditions are set properly CALL boundary_condition_check( config_flags, bdyzone, error, grid%id ) !kludge - need to stop CG from resetting precip and phys tendencies to zero ! when we are in here due to a nest being spawned, we want to still ! recompute the base state, but that is about it ! This is temporary and will need to be changed when grid%itimestep is removed. IF ( grid%itimestep .EQ. 0 ) THEN first_trip_for_this_domain = .TRUE. ELSE first_trip_for_this_domain = .FALSE. END IF IF ( .not. ( config_flags%restart .or. grid%moved ) ) THEN grid%itimestep=0 ENDIF IF ( config_flags%restart .or. grid%moved ) THEN first_trip_for_this_domain = .TRUE. ENDIF ! wig: Add a combined exponential+linear weight on the mother boundaries ! following code changes by Ruby Leung. For the nested grid, there ! appears to be some problems when a sponge is used. The points where ! processors meet have problematic values. CALL lbc_fcx_gcx ( grid%fcx , grid%gcx , grid%spec_bdy_width , & grid%spec_zone , grid%relax_zone , grid%dt , config_flags%spec_exp , & config_flags%specified , config_flags%nested ) IF ( config_flags%nested ) THEN grid%dtbc = 0. ENDIF IF ( ( grid%id .NE. 1 ) .AND. ( .NOT. config_flags%input_from_file ) ) THEN ! Every time a domain starts or every time a domain moves, this routine is called. We want ! the center (middle) lat/lon of the grid for the metacode. The lat/lon values are ! defined at mass points. Depending on the even/odd points in the SN and WE directions, ! we end up with the middle point as either 1 point or an average of either 2 or 4 points. ! Add to this, the need to make sure that we are on the correct patch to retrieve the ! value of the lat/lon, AND that the lat/lons (for an average) may not all be on the same ! patch. Once we find the correct value for lat lon, we need to keep it around on all patches, ! which is where the wrf_dm_min_real calls come in. ! If this is the most coarse domain, we do not go in here. Also, if there is an input file ! (which has the right values for the middle lat/lon) we do not go in this IF test. IF ( ( MOD(ide,2) .EQ. 0 ) .AND. ( MOD(jde,2) .EQ. 0 ) ) THEN num_points_lat_lon = 1 iloc = ide/2 jloc = jde/2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat1 = grid%xlat (iloc,jloc) lon1 = grid%xlong(iloc,jloc) ELSE lat1 = 99999. lon1 = 99999. END IF lat1 = wrf_dm_min_real ( lat1 ) lon1 = wrf_dm_min_real ( lon1 ) CALL nl_set_cen_lat ( grid%id , lat1 ) CALL nl_set_cen_lon ( grid%id , lon1 ) ELSE IF ( ( MOD(ide,2) .NE. 0 ) .AND. ( MOD(jde,2) .EQ. 0 ) ) THEN num_points_lat_lon = 2 iloc = (ide-1)/2 jloc = jde /2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat1 = grid%xlat (iloc,jloc) lon1 = grid%xlong(iloc,jloc) ELSE lat1 = 99999. lon1 = 99999. END IF lat1 = wrf_dm_min_real ( lat1 ) lon1 = wrf_dm_min_real ( lon1 ) iloc = (ide+1)/2 jloc = jde /2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat2 = grid%xlat (iloc,jloc) lon2 = grid%xlong(iloc,jloc) ELSE lat2 = 99999. lon2 = 99999. END IF lat2 = wrf_dm_min_real ( lat2 ) lon2 = wrf_dm_min_real ( lon2 ) CALL nl_set_cen_lat ( grid%id , ( lat1 + lat2 ) * 0.50 ) CALL nl_set_cen_lon ( grid%id , ( lon1 + lon2 ) * 0.50 ) ELSE IF ( ( MOD(ide,2) .EQ. 0 ) .AND. ( MOD(jde,2) .NE. 0 ) ) THEN num_points_lat_lon = 2 iloc = ide /2 jloc = (jde-1)/2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat1 = grid%xlat (iloc,jloc) lon1 = grid%xlong(iloc,jloc) ELSE lat1 = 99999. lon1 = 99999. END IF lat1 = wrf_dm_min_real ( lat1 ) lon1 = wrf_dm_min_real ( lon1 ) iloc = ide /2 jloc = (jde+1)/2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat2 = grid%xlat (iloc,jloc) lon2 = grid%xlong(iloc,jloc) ELSE lat2 = 99999. lon2 = 99999. END IF lat2 = wrf_dm_min_real ( lat2 ) lon2 = wrf_dm_min_real ( lon2 ) CALL nl_set_cen_lat ( grid%id , ( lat1 + lat2 ) * 0.50 ) CALL nl_set_cen_lon ( grid%id , ( lon1 + lon2 ) * 0.50 ) ELSE IF ( ( MOD(ide,2) .NE. 0 ) .AND. ( MOD(jde,2) .NE. 0 ) ) THEN num_points_lat_lon = 4 iloc = (ide-1)/2 jloc = (jde-1)/2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat1 = grid%xlat (iloc,jloc) lon1 = grid%xlong(iloc,jloc) ELSE lat1 = 99999. lon1 = 99999. END IF lat1 = wrf_dm_min_real ( lat1 ) lon1 = wrf_dm_min_real ( lon1 ) iloc = (ide+1)/2 jloc = (jde-1)/2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat2 = grid%xlat (iloc,jloc) lon2 = grid%xlong(iloc,jloc) ELSE lat2 = 99999. lon2 = 99999. END IF lat2 = wrf_dm_min_real ( lat2 ) lon2 = wrf_dm_min_real ( lon2 ) iloc = (ide-1)/2 jloc = (jde+1)/2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat3 = grid%xlat (iloc,jloc) lon3 = grid%xlong(iloc,jloc) ELSE lat3 = 99999. lon3 = 99999. END IF lat3 = wrf_dm_min_real ( lat3 ) lon3 = wrf_dm_min_real ( lon3 ) iloc = (ide+1)/2 jloc = (jde+1)/2 IF ( ( ips .LE. iloc ) .AND. ( ipe .GE. iloc ) .AND. & ( jps .LE. jloc ) .AND. ( jpe .GE. jloc ) ) THEN lat4 = grid%xlat (iloc,jloc) lon4 = grid%xlong(iloc,jloc) ELSE lat4 = 99999. lon4 = 99999. END IF lat4 = wrf_dm_min_real ( lat4 ) lon4 = wrf_dm_min_real ( lon4 ) CALL nl_set_cen_lat ( grid%id , ( lat1 + lat2 + lat3 + lat4 ) * 0.25 ) CALL nl_set_cen_lon ( grid%id , ( lon1 + lon2 + lon3 + lon4 ) * 0.25 ) END IF END IF IF ( .NOT. config_flags%restart .AND. & (( config_flags%input_from_hires ) .OR. ( config_flags%input_from_file ))) THEN IF ( config_flags%map_proj .EQ. 0 ) THEN CALL wrf_error_fatal ( 'start_domain: Idealized case cannot have a separate nested input file' ) END IF CALL nl_get_base_pres ( 1 , p00 ) CALL nl_get_base_temp ( 1 , t00 ) CALL nl_get_base_lapse ( 1 , a ) ! Base state potential temperature and inverse density (alpha = 1/rho) from ! the half eta levels and the base-profile surface pressure. Compute 1/rho ! from equation of state. The potential temperature is a perturbation from t0. DO j = jts, MIN(jte,jde-1) DO i = its, MIN(ite,ide-1) ! Base state pressure is a function of eta level and terrain, only, plus ! the hand full of constants: p00 (sea level pressure, Pa), t00 (sea level ! temperature, K), and A (temperature difference, from 1000 mb to 300 mb, K). p_surf = p00 * EXP ( -t00/a + ( (t00/a)**2 - 2.*g*grid%ht(i,j)/a/r_d ) **0.5 ) DO k = 1, kte-1 grid%pb(i,k,j) = grid%znu(k)*(p_surf - grid%p_top) + grid%p_top grid%t_init(i,k,j) = (t00 + A*LOG(grid%pb(i,k,j)/p00))*(p00/grid%pb(i,k,j))**(r_d/cp) - t0 grid%alb(i,k,j) = (r_d/p1000mb)*(grid%t_init(i,k,j)+t0)*(grid%pb(i,k,j)/p1000mb)**cvpm END DO ! Base state mu is defined as base state surface pressure minus grid%p_top grid%mub(i,j) = p_surf - grid%p_top ! Integrate base geopotential, starting at terrain elevation. This assures that ! the base state is in exact hydrostatic balance with respect to the model equations. ! This field is on full levels. grid%phb(i,1,j) = grid%ht(i,j) * g DO k = 2,kte grid%phb(i,k,j) = grid%phb(i,k-1,j) - grid%dnw(k-1)*grid%mub(i,j)*grid%alb(i,k-1,j) END DO END DO END DO ENDIF IF(.not.config_flags%restart)THEN ! if this is for a nested domain, the defined/interpolated fields are the _2 IF ( first_trip_for_this_domain ) THEN ! data that is expected to be zero must be explicitly initialized as such ! grid%h_diabatic = 0. DO j = jts,min(jte,jde-1) DO k = kts,kte-1 DO i = its, min(ite,ide-1) IF ( grid%imask_nostag(i,j) .EQ. 1 ) THEN grid%t_1(i,k,j)=grid%t_2(i,k,j) ENDIF ENDDO ENDDO ENDDO DO j = jts,min(jte,jde-1) DO i = its, min(ite,ide-1) IF ( grid%imask_nostag(i,j) .EQ. 1 ) THEN grid%mu_1(i,j)=grid%mu_2(i,j) ENDIF ENDDO ENDDO END IF ! reconstitute base-state fields IF(config_flags%max_dom .EQ. 1)THEN ! with single domain, grid%t_init from wrfinput is OK to use DO j = jts,min(jte,jde-1) DO k = kts,kte-1 DO i = its, min(ite,ide-1) IF ( grid%imask_nostag(i,j) .EQ. 1 ) THEN grid%pb(i,k,j) = grid%znu(k)*grid%mub(i,j)+grid%p_top grid%alb(i,k,j) = (r_d/p1000mb)*(grid%t_init(i,k,j)+t0)*(grid%pb(i,k,j)/p1000mb)**cvpm ENDIF ENDDO ENDDO ENDDO ELSE ! with nests, grid%t_init generally needs recomputations (since it is not interpolated) DO j = jts,min(jte,jde-1) DO k = kts,kte-1 DO i = its, min(ite,ide-1) IF ( grid%imask_nostag(i,j) .EQ. 1 ) THEN grid%pb(i,k,j) = grid%znu(k)*grid%mub(i,j)+grid%p_top grid%alb(i,k,j) = -grid%rdnw(k)*(grid%phb(i,k+1,j)-grid%phb(i,k,j))/grid%mub(i,j) grid%t_init(i,k,j) = grid%alb(i,k,j)*(p1000mb/r_d)/((grid%pb(i,k,j)/p1000mb)**cvpm) - t0 ENDIF ENDDO ENDDO ENDDO ENDIF DO j = jts,min(jte,jde-1) k = kte-1 DO i = its, min(ite,ide-1) IF ( grid%imask_nostag(i,j) .EQ. 1 ) THEN qvf1 = 0.5*(moist(i,k,j,P_QV)+moist(i,k,j,P_QV)) qvf2 = 1./(1.+qvf1) qvf1 = qvf1*qvf2 grid%p(i,k,j) = - 0.5*(grid%mu_1(i,j)+qvf1*grid%mub(i,j))/grid%rdnw(k)/qvf2 qvf = 1. + rvovrd*moist(i,k,j,P_QV) grid%alt(i,k,j) = (r_d/p1000mb)*(grid%t_1(i,k,j)+t0)*qvf*(((grid%p(i,k,j)+grid%pb(i,k,j))/p1000mb)**cvpm) grid%al(i,k,j) = grid%alt(i,k,j) - grid%alb(i,k,j) ENDIF ENDDO DO k = kte-2, 1, -1 DO i = its, min(ite,ide-1) IF ( grid%imask_nostag(i,j) .EQ. 1 ) THEN qvf1 = 0.5*(moist(i,k,j,P_QV)+moist(i,k+1,j,P_QV)) qvf2 = 1./(1.+qvf1) qvf1 = qvf1*qvf2 grid%p(i,k,j) = grid%p(i,k+1,j) - (grid%mu_1(i,j) + qvf1*grid%mub(i,j))/qvf2/grid%rdn(k+1) qvf = 1. + rvovrd*moist(i,k,j,P_QV) grid%alt(i,k,j) = (r_d/p1000mb)*(grid%t_1(i,k,j)+t0)*qvf* & (((grid%p(i,k,j)+grid%pb(i,k,j))/p1000mb)**cvpm) grid%al(i,k,j) = grid%alt(i,k,j) - grid%alb(i,k,j) ENDIF ENDDO ENDDO ENDDO ENDIF IF ( grid%press_adj .and. ( grid%id .NE. 1 ) .AND. .NOT. ( config_flags%restart ) .AND. & ( ( config_flags%input_from_hires ) .OR. ( config_flags%input_from_file ) ) ) THEN DO j = jts, MIN(jte,jde-1) DO i = its, MIN(ite,ide-1) grid%mu_2(i,j) = grid%mu_2(i,j) + grid%al(i,1,j) / ( grid%alt(i,1,j) * grid%alb(i,1,j) ) * & g * ( grid%ht(i,j) - grid%ht_fine(i,j) ) END DO END DO DO j = jts,min(jte,jde-1) DO i = its, min(ite,ide-1) grid%mu_1(i,j)=grid%mu_2(i,j) ENDDO ENDDO END IF IF ( first_trip_for_this_domain ) THEN CALL wrf_debug ( 100 , 'start_domain_em: Before call to phy_init' ) ! namelist MPDT does not exist yet, so set it here ! MPDT is the call frequency for microphysics in minutes (0 means every step) MPDT = 0. ! set GMT outside of phy_init because phy_init may not be called on this ! process if, for example, it is a moving nest and if this part of the domain is not ! being initialized (not the leading edge). CALL domain_setgmtetc( grid, start_of_simulation ) !----------------------------------------------------------------------------- ! Adaptive time step: Added by T. Hutchinson, WSI 11/6/07 ! ! IF ( ( grid%use_adaptive_time_step ) .AND. & ( ( grid%dfi_opt .EQ. DFI_NODFI ) .OR. ( grid%dfi_stage .EQ. DFI_FST ) ) ) THEN ! Calculate any variables that were not set if (grid%starting_time_step == -1) then grid%starting_time_step = NINT(6 * MIN(grid%dx,grid%dy) / 1000) endif if (grid%max_time_step == -1) then grid%max_time_step = 3*grid%starting_time_step endif if (grid%min_time_step == -1) then grid%min_time_step = 0.5*grid%starting_time_step endif ! Set a starting timestep. grid%dt = grid%starting_time_step / grid%parent_time_step_ratio ! Check to assure that time_step_sound is to be dynamically set. CALL nl_set_time_step_sound ( 1 , 0 ) grid%time_step_sound = 0 grid%max_msftx=MAXVAL(grid%msftx) grid%max_msfty=MAXVAL(grid%msfty) #ifdef DM_PARALLEL CALL wrf_dm_maxval(grid%max_msftx, idex, jdex) CALL wrf_dm_maxval(grid%max_msfty, idex, jdex) #endif ! This first call just initializes variables. CALL adapt_timestep(grid, config_flags) END IF ! End of adaptive time step modifications !----------------------------------------------------------------------------- CALL set_tiles ( grid , grid%imask_nostag, ims, ime, jms, jme, ips, ipe, jps, jpe ) ! ! Phy init can do reads and broadcasts when initializing physics -- landuse for example. However, if ! we're running on a reduced mesh (that is, some tasks don't have any work) we have to at least let them ! pass through this code so the broadcasts don't hang on the other, active tasks. Set the number of ! tiles to a minimum of 1 and assume that the backwards patch ranges (ips=0, ipe=-1) will prevent ! anything else from happening on the blank tasks. JM 20080605 ! if ( allowed_to_read ) grid%num_tiles = max(1,grid%num_tiles) ! ! Phy_init is not necessarily thread-safe; do not multi-thread this loop. ! The tiling is to handle the fact that we may be masking off part of the computation. ! DO ij = 1, grid%num_tiles CALL phy_init ( grid%id , config_flags, grid%DT, grid%RESTART, grid%znw, grid%znu, & grid%p_top, grid%tsk, grid%RADT,grid%BLDT,grid%CUDT, MPDT, & grid%rthcuten, grid%rqvcuten, grid%rqrcuten, & grid%rqccuten, grid%rqscuten, grid%rqicuten, & grid%rublten,grid%rvblten,grid%rthblten, & grid%rqvblten,grid%rqcblten,grid%rqiblten, & grid%rthraten,grid%rthratenlw,grid%rthratensw, & grid%stepbl,grid%stepra,grid%stepcu, & grid%w0avg, grid%rainnc, grid%rainc, grid%raincv, grid%rainncv, & grid%nca,grid%swrad_scat, & grid%cldefi,grid%lowlyr, & grid%mass_flux, & grid%rthften, grid%rqvften, & grid%cldfra, & #ifdef WRF_CHEM grid%cldfra_old, & #endif #ifndef WRF_CHEM cldfra_old, & #endif grid%glw,grid%gsw,grid%emiss,grid%embck, & grid%lu_index, & grid%landuse_ISICE, grid%landuse_LUCATS, & grid%landuse_LUSEAS, grid%landuse_ISN, & grid%lu_state, & grid%xlat,grid%xlong,grid%albedo,grid%albbck,grid%GMT,grid%JULYR,grid%JULDAY, & grid%levsiz, num_ozmixm, num_aerosolc, grid%paerlev, & grid%tmn,grid%xland,grid%znt,grid%z0,grid%ust,grid%mol,grid%pblh,grid%tke_myj, & grid%exch_h,grid%thc,grid%snowc,grid%mavail,grid%hfx,grid%qfx,grid%rainbl, & grid%tslb,grid%zs,grid%dzs,config_flags%num_soil_layers,grid%warm_rain, & grid%adv_moist_cond, & grid%apr_gr,grid%apr_w,grid%apr_mc,grid%apr_st,grid%apr_as, & grid%apr_capma,grid%apr_capme,grid%apr_capmi, & grid%xice,grid%xicem,grid%vegfra,grid%snow,grid%canwat,grid%smstav, & grid%smstot, grid%sfcrunoff,grid%udrunoff,grid%grdflx,grid%acsnow, & grid%acsnom,grid%ivgtyp,grid%isltyp, grid%sfcevp,grid%smois, & grid%sh2o, grid%snowh, grid%smfr3d, & grid%DX,grid%DY,grid%f_ice_phy,grid%f_rain_phy,grid%f_rimef_phy, & grid%mp_restart_state,grid%tbpvs_state,grid%tbpvs0_state,& allowed_to_read, grid%moved, start_of_simulation, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & grid%i_start(ij), grid%i_end(ij), grid%j_start(ij), grid%j_end(ij), kts, kte, & ozmixm,grid%pin, & ! Optional grid%m_ps_1,grid%m_ps_2,grid%m_hybi,aerosolc_1,aerosolc_2,& ! Optional grid%rundgdten,grid%rvndgdten,grid%rthndgdten, & ! Optional grid%rqvndgdten,grid%rmundgdten, & ! Optional grid%FGDT,grid%stepfg, & ! Optional grid%cugd_tten,grid%cugd_ttens,grid%cugd_qvten, & ! Optional grid%cugd_qvtens,grid%cugd_qcten, & ! Optional grid%DZR, grid%DZB, grid%DZG, & !Optional urban grid%TR_URB2D,grid%TB_URB2D,grid%TG_URB2D,grid%TC_URB2D, & !Optional urban grid%QC_URB2D, grid%XXXR_URB2D,grid%XXXB_URB2D, & !Optional urban grid%XXXG_URB2D, grid%XXXC_URB2D, & !Optional urban grid%TRL_URB3D, grid%TBL_URB3D, grid%TGL_URB3D, & !Optional urban grid%SH_URB2D, grid%LH_URB2D, grid%G_URB2D, grid%RN_URB2D, & !Optional urban grid%TS_URB2D, grid%FRC_URB2D, grid%UTYPE_URB2D, & !Optional urban grid%TML,grid%T0ML,grid%HML,grid%H0ML,grid%HUML,grid%HVML, & !Optional oml itimestep=grid%itimestep, fdob=grid%fdob & ) ENDDO CALL wrf_debug ( 100 , 'start_domain_em: After call to phy_init' ) #ifdef MCELIO grid%LU_MASK = 0. WHERE ( grid%lu_index .EQ. 16 ) grid%LU_MASK = 1. #endif END IF #if 0 #include "CYCLE_TEST.inc" #endif ! ! ! set physical boundary conditions for all initialized variables !----------------------------------------------------------------------- ! Stencils for patch communications (WCS, 29 June 2001) ! Note: the size of this halo exchange reflects the ! fact that we are carrying the uncoupled variables ! as state variables in the mass coordinate model, as ! opposed to the coupled variables as in the height ! coordinate model. ! ! * * * * * ! * * * * * * * * * ! * + * * + * * * + * * ! * * * * * * * * * ! * * * * * ! !j grid%u_1 x !j grid%u_2 x !j grid%v_1 x !j grid%v_2 x !j grid%w_1 x !j grid%w_2 x !j grid%t_1 x !j grid%t_2 x !j grid%ph_1 x !j grid%ph_2 x ! !j grid%t_init x ! !j grid%phb x !j grid%ph0 x !j grid%php x !j grid%pb x !j grid%al x !j grid%alt x !j grid%alb x ! ! the following are 2D (xy) variables ! !j grid%mu_1 x !j grid%mu_2 x !j grid%mub x !j grid%mu0 x !j grid%ht x !j grid%msftx x !j grid%msfty x !j grid%msfux x !j grid%msfuy x !j grid%msfvx x !j grid%msfvy x !j grid%sina x !j grid%cosa x !j grid%e x !j grid%f x ! ! 4D variables ! ! moist x ! chem x !scalar x !-------------------------------------------------------------- #ifdef DM_PARALLEL # include "HALO_EM_INIT_1.inc" # include "HALO_EM_INIT_2.inc" # include "HALO_EM_INIT_3.inc" # include "HALO_EM_INIT_4.inc" # include "HALO_EM_INIT_5.inc" # include "PERIOD_BDY_EM_INIT.inc" # include "PERIOD_BDY_EM_MOIST.inc" # include "PERIOD_BDY_EM_CHEM.inc" #endif CALL set_physical_bc3d( grid%u_1 , 'U' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%u_2 , 'U' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%v_1 , 'V' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%v_2 , 'V' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) ! set kinematic condition for w CALL set_physical_bc2d( grid%ht , 'r' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) IF ( .not. config_flags%restart ) THEN CALL set_w_surface( config_flags, grid%znw, & grid%w_1, grid%ht, grid%u_1, grid%v_1, grid%cf1, & grid%cf2, grid%cf3, grid%rdx, grid%rdy, grid%msftx, grid%msfty, & ids, ide, jds, jde, kds, kde, & ips, ipe, jps, jpe, kps, kpe, & its, ite, jts, jte, kts, kte, & ims, ime, jms, jme, kms, kme ) CALL set_w_surface( config_flags, grid%znw, & grid%w_2, grid%ht, grid%u_2, grid%v_2, grid%cf1, & grid%cf2, grid%cf3, grid%rdx, grid%rdy, grid%msftx, grid%msfty, & ids, ide, jds, jde, kds, kde, & ips, ipe, jps, jpe, kps, kpe, & its, ite, jts, jte, kts, kte, & ims, ime, jms, jme, kms, kme ) END IF ! finished setting kinematic condition for w at the surface CALL set_physical_bc3d( grid%w_1 , 'W' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%w_2 , 'W' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%ph_1 , 'W' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%ph_2 , 'W' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%t_1 , 't' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%t_2 , 't' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc2d( grid%mu_1, 't' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%mu_2, 't' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%mub , 't' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%mu0 , 't' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc3d( grid%phb , 'W' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%ph0 , 'W' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%php , 'W' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%pb , 't' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%al , 't' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%alt , 't' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d( grid%alb , 't' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) CALL set_physical_bc3d(grid%t_init, 't' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) IF (num_moist > 0) THEN ! use of (:,:,:,loop) not efficient on DEC, but (ims,kms,jms,loop) not portable to SGI/Cray loop_3d_m : DO loop = 1 , num_moist CALL set_physical_bc3d( moist(:,:,:,loop) , 'r' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) END DO loop_3d_m ENDIF !wig 17-Oct-2006, begin: I think the following should be here... IF (num_scalar > 0) THEN ! use of (:,:,:,loop) not efficient on DEC, but (ims,kms,jms,loop) not portable to SGI/Cray loop_3d_s : DO loop = 1 , num_scalar CALL set_physical_bc3d( scalar(:,:,:,loop) , 'r' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) END DO loop_3d_s ENDIF !wig end. #ifdef WRF_CHEM ! ! we do this here, so we only have one chem_init routine for either core.... ! do j=jts,min(jte,jde-1) do i=its,min(ite,ide-1) do k=kts,kte z_at_w(i,k,j)=(grid%ph_2(i,k,j)+grid%phb(i,k,j))/g enddo do k=kts,min(kte,kde-1) tempfac=(grid%t_1(i,k,j) + t0)*((grid%p(i,k,j) + grid%pb(i,k,j))/p1000mb)**rcp convfac(i,k,j) = (grid%p(i,k,j)+grid%pb(i,k,j))/rgasuniv/tempfac enddo enddo enddo CALL chem_init (grid%id,chem,emis_ant,scalar,grid%dt,grid%bioemdt,grid%photdt, & grid%chemdt, & grid%stepbioe,grid%stepphot,grid%stepchem,grid%stepfirepl, & grid%plumerisefire_frq,z_at_w,grid%xlat,grid%xlong,g, & grid%aerwrf,config_flags, & grid%alt,grid%t_1,grid%p,convfac,grid%ttday,grid%tcosz, & grid%julday,grid%gmt,& grid%gd_cloud, grid%gd_cloud2,grid%raincv_a,grid%raincv_b, & grid%gd_cloud_a, grid%gd_cloud2_a, & grid%gd_cloud_b, grid%gd_cloud2_b, & grid%tauaer1,grid%tauaer2,grid%tauaer3,grid%tauaer4, & grid%gaer1,grid%gaer2,grid%gaer3,grid%gaer4, & grid%waer1,grid%waer2,grid%waer3,grid%waer4, & grid%l2aer,grid%l3aer,grid%l4aer,grid%l5aer,grid%l6aer,grid%l7aer, & grid%pm2_5_dry,grid%pm2_5_water,grid%pm2_5_dry_ec, & grid%chem_in_opt,grid%kemit, & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte ) ! ! calculate initial pm ! ! print *,'calculating initial pm' select case (config_flags%chem_opt) case (GOCART_SIMPLE,GOCARTRACM_KPP) call sum_pm_gocart ( & grid%alt, chem, grid%pm2_5_dry, grid%pm2_5_dry_ec,grid%pm10,& ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte-1 ) case (RADM2SORG, RACMSORG) call sum_pm_sorgam ( & grid%alt, chem, grid%h2oaj, grid%h2oai, & grid%pm2_5_dry, grid%pm2_5_water, grid%pm2_5_dry_ec, grid%pm10, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte-1 ) case (CBMZ_MOSAIC_4BIN,CBMZ_MOSAIC_8BIN,CBMZ_MOSAIC_4BIN_AQ,CBMZ_MOSAIC_8BIN_AQ) call sum_pm_mosaic ( & grid%alt, chem, & grid%pm2_5_dry, grid%pm2_5_water, grid%pm2_5_dry_ec, grid%pm10, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & its,ite, jts,jte, kts,kte-1 ) case default do j=jts,min(jte,jde-1) do k=kts,min(kte,kde-1) do i=its,min(ite,ide-1) grid%pm2_5_dry(i,k,j) = 0. grid%pm2_5_water(i,k,j) = 0. grid%pm2_5_dry_ec(i,k,j) = 0. grid%pm10(i,k,j) = 0. enddo enddo enddo end select #endif IF (num_chem >= PARAM_FIRST_SCALAR ) THEN ! use of (:,:,:,loop) not efficient on DEC, but (ims,kms,jms,loop) not portable to SGI/Cray loop_3d_c : DO loop = PARAM_FIRST_SCALAR , num_chem CALL set_physical_bc3d( chem(:,:,:,loop) , 'r' , config_flags , & ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & its , ite , jts , jte , kts , kte , & its , ite , jts , jte , kts , kte ) END DO loop_3d_c ENDIF CALL set_physical_bc2d( grid%msftx , 'r' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%msfty , 'r' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%msfux , 'x' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%msfuy , 'x' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%msfvx , 'y' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%msfvy , 'y' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%sina , 'r' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%cosa , 'r' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%e , 'r' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) CALL set_physical_bc2d( grid%f , 'r' , config_flags , & ids , ide , jds , jde , & ims , ime , jms , jme , & its , ite , jts , jte , & its , ite , jts , jte ) #ifndef WRF_CHEM DEALLOCATE(CLDFRA_OLD) #endif #ifdef DM_PARALLEL # include "HALO_EM_INIT_1.inc" # include "HALO_EM_INIT_2.inc" # include "HALO_EM_INIT_3.inc" # include "HALO_EM_INIT_4.inc" # include "HALO_EM_INIT_5.inc" # include "PERIOD_BDY_EM_INIT.inc" # include "PERIOD_BDY_EM_MOIST.inc" # include "PERIOD_BDY_EM_CHEM.inc" #endif CALL wrf_debug ( 100 , 'start_domain_em: Returning' ) RETURN END SUBROUTINE start_domain_em