MODULE callradite_mod IMPLICIT NONE CONTAINS SUBROUTINE callradite(icount,ngrid,nlayer,nq,zday,ls,pq,albedo, $ emis,mu0,pplev,pplay,pt,tsurf,fract,dist_sol,igout, $ dtlw,dtsw,fluxsurf_lw,fluxsurf_dn_sw,fluxsurf_up_sw, $ fluxtop_lw,fluxtop_dn_sw,fluxtop_up_sw, & tau_pref_scenario,tau_pref_gcm, & tau,aerosol,dsodust,tauscaling,dust_rad_adjust,IRtoVIScoef, $ taucloudtes,rdust,rice,nuice,riceco2,nuiceco2,co2ice, $ rstormdust,rtopdust,totstormfract,clearatm,dsords,dsotop, $ nohmons,clearsky,totcloudfrac) use aeropacity_mod, only: aeropacity use updatereffrad_mod, only: updatereffrad use dimradmars_mod, only: ndomainsz, nflev, nsun, nir use dimradmars_mod, only: naerkind, name_iaer, & iaer_dust_conrath,iaer_dust_doubleq, & iaer_dust_submicron, iaer_h2o_ice, iaer_co2_ice, & iaer_stormdust_doubleq,iaer_topdust_doubleq,flux_1AU use yomlw_h, only: gcp, nlaylte use comcstfi_h, only: g,cpp use time_phylmdz_mod, only: daysec use lwmain_mod, only: lwmain use swmain_mod, only: swmain use dust_param_mod, only: doubleq, active, submicron IMPLICIT NONE c======================================================================= c subject: c -------- c Subroutine designed to call the main canonic c radiative transfer subroutine "lwmain" et "swmain" c to compute radiative heating and cooling rate and c radiative fluxes to the surface. c c These calculations are only valid on the part of the atmosphere c where Local Thermal Equilibrium (LTE) is verified. In practice c the calculations are only performed for the first "nlaylte" c parameters (nlaylte is calculated by subroutine "nlthermeq" c and stored in module "yomlw_h"). c c The purpose of this subroutine is to: c 1) Make some initial calculation at first call c 2) Split the calculation in several sub-grid c ("sub-domain") to save memory and c be able run on a workstation at high resolution c The sub-grid size is defined in dimradmars_mod c 3) Compute the 3D scattering parameters depending on the c size distribution of the different tracers (added by JBM) c 4) call "lwmain" and "swmain" c c c authors: c ------ c Francois Forget / Christophe Hourdin / J.-B. Madeleine (2009) c c c 3D scattering scheme user's guide (J.-B. Madeleine) c --------------------------------- c c This routine has been modified to take into account 3D, time c dependent scattering properties of the aerosols. c---- The look-up tables that contain the scattering parameters c of a given tracer, for different sizes, are read by SUAER.F90. c The names of the corresponding ASCII files have to be set in c this subroutine (file_id variable), and files must be in the c directory specified in datafile_mod. Please make sure that the c ASCII files are correctly written, and that the range c of particle sizes is consistent with what you would expect. c---- SUAER.F90 is in charge of reading the ASCII files and averaging c the scattering parameters in each GCM channel, using the three last c equations of Forget et al. 1998 (GRL 25, No.7, p.1105-1108). c---- These look-up tables, loaded during the firstcall, are then c constantly used by the subroutine "aeroptproperties.F" to compute, c online, the 3D scattering parameters, based on the size distribution c (reffrad and nueffrad) of the different tracers, in each grid box. c These 3D size distributions are loaded by the "updatereffrad.F" c subroutine. A log-normal distribution is then assumed in c "aeroptproperties.F", along with a Gauss-Legendre integration. c---- The optical depth at the visible reference wavelength (set in c SUAER.F90, after the file_id variable) is then computed by c the subroutine "aeropacity.F", by using the size and spatial c distribution of the corresponding tracer. This connection has to c be implemented in "aeropacity.F" when adding a new tracer. To do so, c one can use equation 2 of Forget et al. 1998 (Icarus 131, p.302-316). c---- The resulting variables "aerosol", "QVISsQREF3d", "omegaVIS3d" and c "gVIS3d" (same in the infrared) are finally used by lwmain.F and c swmain.F to solve the radiative transfer equation. c c changes: c ------- c c > SRL 7/2000 c c This version has been modified to only calculate radiative tendencies c over layers 1..NFLEV (set in dimradmars_mod). Returns zero for higher c layers, if any. c In other routines, nlayer -> nflev. c Routines affected: lwflux, lwi, lwmain, lwxb, lwxd, lwxn. c c > J.-B. Madeleine 10W12 c This version uses the variable's splitting, which can be usefull c when performing very high resolution simulation like LES. c c ---------- c Here, solar band#1 is spectral interval between "long1vis" and "long2vis" c set in dimradmars_mod c Here, solar band#2 is spectral interval between "long2vis" and "long3vis" c set in dimradmars_mod c c input: c ----- c icount counter of call to subroutine physic by gcm c ngrid number of gridpoint of horizontal grid c nlayer Number of layer c nq Number of tracer c ls Solar longitude (Ls) , radian c zday Date (time since Ls=0, in martian days) c pq(ngrid,nlayer,nq) Advected fields c c albedo (ngrid,2) hemispheric surface albedo c albedo (i,1) : mean albedo for solar band#1 c (see below) c albedo (i,2) : mean albedo for solar band#2 c (see below) c emis Thermal IR surface emissivity (no unit) c mu0(ngrid) cos of solar zenith angle c (=1 when sun at zenith) c pplay(ngrid,nlayer) pressure (Pa) in the middle of each layer c pplev(ngrid,nlayer+1) pressure (Pa) at boundaries of each layer c pt(ngrid,nlayer) atmospheric temperature in each layer (K) c tsurf(ngrid) surface temperature (K) c fract(ngrid) day fraction of the time interval c =1 during the full day ; =0 during the night c declin latitude of subsolar point c dist_sol sun-Mars distance (AU) c igout coordinate of analysed point for debugging c reffrad(ngrid,nlayer,naerkind) Aerosol effective radius c nueffrad(ngrid,nlayer,naerkind) Aerosol effective variance c======================================================================= c c Declarations : c ------------- c include "callkeys.h" c----------------------------------------------------------------------- c Input/Output c ------------ INTEGER,INTENT(IN) :: icount INTEGER,INTENT(IN) :: ngrid,nlayer,nq INTEGER,INTENT(IN) :: igout REAL,INTENT(IN) :: pq(ngrid,nlayer,nq) REAL,INTENT(INOUT) :: tauscaling(ngrid) ! Conversion factor for ! qdust and Ndust REAL,INTENT(INOUT) :: dust_rad_adjust(ngrid) ! Radiative adjustment ! factor for dust REAL,INTENT(INOUT) :: IRtoVIScoef(ngrid) ! conversion coefficient to apply on ! scenario absorption IR (9.3um) CDOD ! = tau_pref_gcm_VIS / tau_pref_gcm_IR REAL,INTENT(IN) :: albedo(ngrid,2),emis(ngrid) REAL,INTENT(IN) :: ls,zday REAL,INTENT(IN) :: pplev(ngrid,nlayer+1),pplay(ngrid,nlayer) REAL,INTENT(IN) :: pt(ngrid,nlayer) REAL,INTENT(IN) :: tsurf(ngrid) REAL,INTENT(IN) :: dist_sol,mu0(ngrid),fract(ngrid) REAL,INTENT(OUT) :: dtlw(ngrid,nlayer) ! longwave (IR) heating rate (K/s) REAL,INTENT(OUT) :: dtsw(ngrid,nlayer) ! shortwave (Solar) heating rate (K/s) REAL,INTENT(OUT) :: fluxsurf_lw(ngrid) ! total LW (thermal IR) downward flux ! (W.m-2) at the surface REAL,INTENT(OUT) :: fluxtop_lw(ngrid) ! outgoing total LW (thermal IR) ! upward flux (W.m-2) at the top of the atm. REAL,INTENT(OUT) :: fluxsurf_dn_sw(ngrid,2) ! surface downward SW flux for ! solar bands #1 and #2 (W.m-2) REAL,INTENT(OUT) :: fluxsurf_up_sw(ngrid,2) ! surface upward SW flux for ! solar bands #1 and #2 (W.m-2) REAL,INTENT(OUT) :: fluxtop_dn_sw(ngrid,2) ! incoming downward SW flux for ! solar bands #1 and #2 (W.m-2) at top of atm. REAL,INTENT(OUT) :: fluxtop_up_sw(ngrid,2) ! outgoing upward SW flux for ! solar bands #1 and #2 (W.m-2) at top of atm. REAL,INTENT(OUT) :: tau_pref_scenario(ngrid) ! prescribed dust column ! visible opacity at odpref from scenario REAL,INTENT(OUT) :: tau_pref_gcm(ngrid) ! computed dust column ! visible opacity at odpref in the GCM REAL,INTENT(OUT) :: tau(ngrid,naerkind) ! Column visible optical depth ! for each aerosol REAL,INTENT(OUT) :: taucloudtes(ngrid)! Cloud opacity at infrared ! reference wavelength using ! Qabs instead of Qext ! (direct comparison with TES) REAL,INTENT(OUT) :: aerosol(ngrid,nlayer,naerkind) ! aerosol extinction ! optical depth at reference wavelength "longrefvis", ! set in dimradmars_h, for each kind of aerosol REAL,INTENT(INOUT) :: dsodust(ngrid,nlayer) REAL,INTENT(OUT) :: rdust(ngrid,nlayer) ! Dust geometric mean radius (m) REAL,INTENT(OUT) :: rice(ngrid,nlayer) ! Ice geometric mean radius (m) REAL,INTENT(OUT) :: nuice(ngrid,nlayer) ! Estimated effective variance double precision,INTENT(OUT) :: riceco2(ngrid,nlayer) ! CO2 ice mean radius(m) REAL,INTENT(OUT) :: nuiceco2(ngrid,nlayer) ! Effective variance REAL,INTENT(IN) :: co2ice(ngrid) ! co2 ice surface layer (kg.m-2) c rocket dust storm LOGICAL,INTENT(IN) :: clearatm ! true for background dust REAL,INTENT(IN) :: totstormfract(ngrid) ! dust storm mesh fraction REAL,INTENT(OUT) :: rstormdust(ngrid,nlayer) ! Storm dust geometric mean radius (m) REAL,INTENT(OUT) :: dsords(ngrid,nlayer) ! density scaled opacity for rocket dust storm dust c entrainment by mountain top dust flows LOGICAL, INTENT(IN) :: nohmons ! true for background dust REAL,INTENT(OUT) :: rtopdust(ngrid,nlayer) ! Topdust geometric mean radius (m) REAL,INTENT(OUT) :: dsotop(ngrid,nlayer) ! density scaled opacity for topmons dust c sub-grid scale water ice clouds LOGICAL,INTENT(IN) :: clearsky REAL,INTENT(IN) :: totcloudfrac(ngrid) c c Local variables : c ----------------- INTEGER j,l,ig,n,ich INTEGER aer_count,iaer INTEGER jd,ig0,nd real cste_mars ! solar constant on Mars (Wm-2) REAL ptlev(ngrid,nlayer+1) INTEGER :: ndomain c Thermal IR net radiative budget (W m-2) real znetrad(ndomainsz,nflev) real zfluxd_sw(ndomainsz,nflev+1,2) real zfluxu_sw(ndomainsz,nflev+1,2) REAL zplev(ndomainsz,nflev+1) REAL zztlev(ndomainsz,nflev+1) REAL zplay(ndomainsz,nflev) REAL zt(ndomainsz,nflev) REAL zaerosol(ndomainsz,nflev,naerkind) REAL zalbedo(ndomainsz,2) REAL zdp(ndomainsz,nflev) REAL zdt0(ndomainsz) REAL zzdtlw(ndomainsz,nflev) REAL zzdtsw(ndomainsz,nflev) REAL zzflux(ndomainsz,6) real zrmuz REAL :: zQVISsQREF3d(ndomainsz,nflev,nsun,naerkind) REAL :: zomegaVIS3d(ndomainsz,nflev,nsun,naerkind) REAL :: zgVIS3d(ndomainsz,nflev,nsun,naerkind) REAL :: zQIRsQREF3d(ndomainsz,nflev,nir,naerkind) REAL :: zomegaIR3d(ndomainsz,nflev,nir,naerkind) REAL :: zgIR3d(ndomainsz,nflev,nir,naerkind) c Aerosol size distribution REAL :: reffrad(ngrid,nlayer,naerkind) REAL :: nueffrad(ngrid,nlayer,naerkind) c Aerosol optical properties REAL :: QVISsQREF3d(ngrid,nlayer,nsun,naerkind) REAL :: omegaVIS3d(ngrid,nlayer,nsun,naerkind) REAL :: gVIS3d(ngrid,nlayer,nsun,naerkind) REAL :: QIRsQREF3d(ngrid,nlayer,nir,naerkind) REAL :: omegaIR3d(ngrid,nlayer,nir,naerkind) REAL :: gIR3d(ngrid,nlayer,nir,naerkind) REAL :: QREFvis3d(ngrid,nlayer,naerkind) ! QREFvis3d : Extinction efficiency at the VISible reference wavelength REAL :: QREFir3d(ngrid,nlayer,naerkind) ! QREFir3d : Extinction efficiency at the InfraRed reference wavelength REAL :: omegaREFvis3d(ngrid,nlayer,naerkind) REAL :: omegaREFir3d(ngrid,nlayer,naerkind) c local saved variables c --------------------- real zco2 ! volume fraction of CO2 in Mars atmosphere !$OMP THREADPRIVATE(zco2) DATA zco2/0.95/ SAVE zco2 LOGICAL firstcall !$OMP THREADPRIVATE(firstcall) DATA firstcall/.true./ SAVE firstcall c---------------------------------------------------------------------- c Initialisation c -------------- ! compute ndomain ! AS: moved out of firstcall to allow nesting+evoluting domain ! ------------------------------------------------------------ ndomain= (ngrid-1) / ndomainsz + 1 IF (firstcall) THEN write(*,*) 'Splitting radiative calculations: ', $ ' ngrid,ndomainsz,ndomain', $ ngrid,ndomainsz,ndomain c Assign a number to the different scatterers c ------------------------------------------- iaer_dust_conrath=0 iaer_dust_doubleq=0 iaer_dust_submicron=0 iaer_h2o_ice=0 iaer_co2_ice=0 iaer_stormdust_doubleq=0 iaer_topdust_doubleq=0 aer_count=0 if (.NOT.active) then do iaer=1,naerkind if (name_iaer(iaer).eq."dust_conrath") then iaer_dust_conrath = iaer aer_count = aer_count + 1 endif enddo endif if (doubleq.AND.active) then do iaer=1,naerkind if (name_iaer(iaer).eq."dust_doubleq") then iaer_dust_doubleq = iaer aer_count = aer_count + 1 endif enddo endif if (submicron.AND.active) then do iaer=1,naerkind if (name_iaer(iaer).eq."dust_submicron") then iaer_dust_submicron = iaer aer_count = aer_count + 1 endif enddo endif if (water.AND.activice) then do iaer=1,naerkind if (name_iaer(iaer).eq."h2o_ice") then iaer_h2o_ice = iaer aer_count = aer_count + 1 endif enddo endif if (co2clouds.AND.activeco2ice) then do iaer=1,naerkind if (name_iaer(iaer).eq."co2_ice") then iaer_co2_ice = iaer aer_count = aer_count + 1 endif enddo endif if (rdstorm.AND.active) then do iaer=1,naerkind if (name_iaer(iaer).eq."stormdust_doubleq") then iaer_stormdust_doubleq = iaer aer_count = aer_count + 1 endif enddo end if if (topflows.AND.active) then do iaer=1,naerkind if (name_iaer(iaer).eq."topdust_doubleq") then iaer_topdust_doubleq = iaer aer_count = aer_count + 1 endif enddo end if c Check that we identified all tracers: if (aer_count.ne.naerkind) then write(*,*) "callradite: found only ",aer_count," scatterers" write(*,*) " expected ",naerkind write(*,*) "please make sure that the number of" write(*,*) "scatterers in scatterers.h, the names" write(*,*) "in callradite.F, and the flags in" write(*,*) "callphys.def are all consistent!" do iaer=1,naerkind write(*,*)' ',iaer,' ',trim(name_iaer(iaer)) enddo call abort_physic("callradite","incoherent scatterers",1) else write(*,*) "callradite: found all scatterers, namely:" do iaer=1,naerkind write(*,*)' ',iaer,' ',trim(name_iaer(iaer)) enddo endif c ------------------------------------------- gcp = g/cpp c Loading the optical properties in external look-up tables: CALL SUAER ! CALL SULW ! this step is now done in ini_yomlw_h if (ngrid .EQ. 1) then if (ndomainsz .NE. 1) then print* print*,'ATTENTION !!!' print*,'pour tourner en 1D, ' print*,'fixer ndomainsz=1 dans phymars/dimradmars_h' print* call exit(1) endif endif firstcall=.false. END IF c Computing aerosol optical properties and opacity c ------------------------------------------------ c Updating aerosol size distributions: CALL updatereffrad(ngrid,nlayer, & rdust,rstormdust,rtopdust,rice,nuice, & reffrad,nueffrad, riceco2, nuiceco2, & pq,tauscaling,tau,pplay, pt) c Computing 3D scattering parameters: gVIS3d(:,:,:,:) = 0. CALL aeroptproperties(ngrid,nlayer,reffrad,nueffrad, & QVISsQREF3d,omegaVIS3d,gVIS3d, & QIRsQREF3d,omegaIR3d,gIR3d, & QREFvis3d,QREFir3d, & omegaREFvis3d,omegaREFir3d) c Computing aerosol optical depth in each layer: CALL aeropacity(ngrid,nlayer,nq,zday,pplay,pplev,ls, & pq,pt,tauscaling,dust_rad_adjust,IRtoVIScoef, & tau_pref_scenario,tau_pref_gcm,tau,taucloudtes, & aerosol,dsodust,reffrad, & QREFvis3d,QREFir3d,omegaREFir3d, & totstormfract,clearatm,dsords,dsotop, & nohmons,clearsky,totcloudfrac) c Starting loop on sub-domain c ---------------------------- zgVIS3d(:,:,:,:) = 0. zfluxd_sw(:,:,:) = 0. zfluxu_sw(:,:,:) = 0. zQVISsQREF3d(:,:,:,:) = 0. zomegaVIS3d(:,:,:,:) = 0. DO jd=1,ndomain ig0=(jd-1)*ndomainsz if (jd.eq.ndomain) then nd=ngrid-ig0 else nd=ndomainsz endif c Spliting input variable in sub-domain input variables c --------------------------------------------------- do l=1,nlaylte do ig = 1,nd do iaer = 1, naerkind do ich = 1, nsun zQVISsQREF3d(ig,l,ich,iaer) = & QVISsQREF3d(ig0+ig,l,ich,iaer) zomegaVIS3d(ig,l,ich,iaer) = & omegaVIS3d(ig0+ig,l,ich,iaer) zgVIS3d(ig,l,ich,iaer) = & gVIS3d(ig0+ig,l,ich,iaer) enddo do ich = 1, nir zQIRsQREF3d(ig,l,ich,iaer) = & QIRsQREF3d(ig0+ig,l,ich,iaer) zomegaIR3d(ig,l,ich,iaer) = & omegaIR3d(ig0+ig,l,ich,iaer) zgIR3d(ig,l,ich,iaer) = & gIR3d(ig0+ig,l,ich,iaer) enddo enddo enddo enddo zplev(:,:) = 0. do l=1,nlaylte+1 do ig = 1,nd zplev(ig,l) = pplev(ig0+ig,l) enddo enddo zdp(:,:) = 0. do l=1,nlaylte do ig = 1,nd zplay(ig,l) = pplay(ig0+ig,l) zt(ig,l) = pt(ig0+ig,l) c Thickness of each layer (Pa) : zdp(ig,l)= pplev(ig0+ig,l) - pplev(ig0+ig,l+1) enddo enddo zaerosol(:,:,:) = 0. do n=1,naerkind do l=1,nlaylte do ig=1,nd zaerosol(ig,l,n) = aerosol(ig0+ig,l,n) enddo enddo enddo zalbedo(:,:) = 0. do j=1,2 do ig = 1,nd zalbedo(ig,j) = albedo(ig0+ig,j) enddo enddo c Intermediate levels: (computing tlev) c --------------------------------------- c Extrapolation for the air temperature above the surface DO ig=1,nd zztlev(ig,1)=zt(ig,1)+ s (zplev(ig,1)-zplay(ig,1))* s (zt(ig,1)-zt(ig,2))/(zplay(ig,1)-zplay(ig,2)) zdt0(ig) = tsurf(ig0+ig) - zztlev(ig,1) ENDDO DO l=2,nlaylte DO ig=1, nd zztlev(ig,l)=0.5*(zt(ig,l-1)+zt(ig,l)) ENDDO ENDDO DO ig=1, nd zztlev(ig,nlaylte+1)=zt(ig,nlaylte) ENDDO c Longwave ("lw") radiative transfer (= thermal infrared) c ------------------------------------------------------- call lwmain (ig0,icount,nd,nflev . ,zdp,zdt0,emis(ig0+1),zplev,zztlev,zt . ,zaerosol,zzdtlw . ,fluxsurf_lw(ig0+1),fluxtop_lw(ig0+1) . ,znetrad & ,zQIRsQREF3d,zomegaIR3d,zgIR3d & ,co2ice(ig0+1)) c Shortwave ("sw") radiative transfer (= solar radiation) c ------------------------------------------------------- c Mars solar constant (W m-2) c flux_1AU = 1370 W.m-2 is the solar constant at 1 AU. cste_mars=flux_1AU/(dist_sol*dist_sol) zzdtsw(:,:) = 0. call swmain ( nd, nflev, S cste_mars, zalbedo, S mu0(ig0+1), zdp, zplev, zaerosol, fract(ig0+1), S zzdtsw, zfluxd_sw, zfluxu_sw, & zQVISsQREF3d,zomegaVIS3d,zgVIS3d) c ------------------------------------------------------------ c Un-spliting output variable from sub-domain input variables c ------------------------------------------------------------ do l=1,nlaylte do ig = 1,nd dtlw(ig0+ig,l) = zzdtlw(ig,l) dtsw(ig0+ig,l) = zzdtsw(ig,l) enddo enddo ptlev(:, :) = 0. do l=1,nlaylte+1 do ig = 1,nd ptlev(ig0+ig,l) = zztlev(ig,l) enddo enddo ! copy SW fluxes at surface and TOA do ig = 1,nd ! surface downward SW flux fluxsurf_dn_sw(ig0+ig,1) = zfluxd_sw(ig,1,1) fluxsurf_dn_sw(ig0+ig,2) = zfluxd_sw(ig,1,2) ! surface upward SW flux fluxsurf_up_sw(ig0+ig,1) = zfluxu_sw(ig,1,1) fluxsurf_up_sw(ig0+ig,2) = zfluxu_sw(ig,1,2) ! downward SW flux at top of atmosphere fluxtop_dn_sw(ig0+ig,1) = zfluxd_sw(ig,nlaylte+1,1) fluxtop_dn_sw(ig0+ig,2) = zfluxd_sw(ig,nlaylte+1,2) ! upward SW flux at top of atmosphere fluxtop_up_sw(ig0+ig,1) = zfluxu_sw(ig,nlaylte+1,1) fluxtop_up_sw(ig0+ig,2) = zfluxu_sw(ig,nlaylte+1,2) enddo ENDDO ! (boucle jd=1, ndomain) c Zero tendencies for any remaining layers between nlaylte and nlayer if (nlayer.gt.nlaylte) then do l = nlaylte+1, nlayer do ig = 1, ngrid dtlw(ig, l) = 0. dtsw(ig, l) = 0. enddo enddo endif c Output for debugging if lwrite=T c -------------------------------- c Write all nlayer layers, even though only nlaylte layers may have c non-zero tendencies. IF(lwrite) THEN PRINT*,'Diagnotique for the radiation' PRINT*,'albedo, emissiv, mu0,fract,fluxsurf_lw,fluxsurf_sw' PRINT*,albedo(igout,1),emis(igout),mu0(igout), s fract(igout), fluxsurf_lw(igout), $ fluxsurf_dn_sw(igout,1)+fluxsurf_dn_sw(igout,2) PRINT*,'Tlay Tlev Play Plev dT/dt SW dT/dt LW (K/s)' PRINT*,'daysec',daysec DO l=1,nlayer PRINT*,pt(igout,l),ptlev(igout,l), s pplay(igout,l),pplev(igout,l), s dtsw(igout,l),dtlw(igout,l) ENDDO ENDIF END SUBROUTINE callradite END MODULE callradite_mod