MODULE co2cloud_mod IMPLICIT NONE DOUBLE PRECISION,allocatable,save :: mem_Mccn_co2(:,:) ! Memory of CCN mass of H2O and dust used by CO2 DOUBLE PRECISION,allocatable,save :: mem_Mh2o_co2(:,:) ! Memory of H2O mass integred into CO2 crystal DOUBLE PRECISION,allocatable,save :: mem_Nccn_co2(:,:) ! Memory of CCN number of H2O and dust used by CO2 CONTAINS SUBROUTINE co2cloud(ngrid,nlay,ptimestep, & pplev,pplay,pdpsrf,pzlay,pt,pdt, & pq,pdq,pdqcloudco2,pdtcloudco2, & nq,tau,tauscaling,rdust,rice,riceco2,nuice, & rsedcloudco2,rhocloudco2, & rsedcloud,rhocloud,pzlev,pdqs_sedco2, & pdu,pu,pcondicea) USE ioipsl_getincom, only: getin use dimradmars_mod, only: naerkind USE comcstfi_h, only: pi, g, cpp USE updaterad, only: updaterice_microco2, updaterice_micro, & updaterdust use conc_mod, only: mmean,rnew use tracer_mod, only: nqmx, igcm_co2, igcm_co2_ice, & igcm_dust_mass, igcm_dust_number,igcm_h2o_ice, & igcm_ccn_mass,igcm_ccn_number, & igcm_ccnco2_mass, igcm_ccnco2_number, & rho_dust, nuiceco2_sed, nuiceco2_ref, & rho_ice_co2,r3n_q,rho_ice,nuice_sed USE newsedim_mod, ONLY: newsedim USE datafile_mod, ONLY: datadir USE improvedco2clouds_mod, ONLY: improvedco2clouds IMPLICIT NONE include "callkeys.h" include "microphys.h" c======================================================================= c CO2 clouds formation c c There is a time loop specific to cloud formation c due to timescales smaller than the GCM integration timestep. c microphysics subroutine is improvedCO2clouds.F c the microphysics time step is a fraction of the physical one c the integer imicroco2 must be set in callphys.def c c The co2 clouds tracers (co2_ice, ccn mass and concentration) are c sedimented at each microtimestep. pdqs_sedco2 keeps track of the c CO2 flux at the surface c c Authors: 09/2016 Joachim Audouard & Constantino Listowski c Adaptation of the water ice clouds scheme (with specific microphysics) c of Montmessin, Navarro & al. c c 07/2017 J.Audouard c Several logicals and integer must be set to .true. in callphys.def c if not, default values are .false. c co2clouds=.true. call this routine c co2useh2o=.true. allow the use of water ice particles as CCN for CO2 c meteo_flux=.true. supply meteoritic particles c CLFvaryingCO2=.true. allows a subgrid temperature distribution c of amplitude spantCO2(=integer in callphys.def, typically 3) c satindexco2=.true. allows the filtering out of the sub-grid T distribution c if the GW saturates in the column. Based on Spiga et al c 2012 c An index is computed for the column, and the sub-grid T c distribution is applied if the index remains < 0.1 c setting to .false. applies the sub-grid T everywhere. c default value is .true., only applies if c CLFvaryingCO2=.true. anyway. c imicroco2=50 c c The subgrid Temperature distribution is modulated (0 or 1) by Spiga et c al. (GRL 2012) Saturation Index to account for GW propagation or c dissipation upwards. c c 4D and column opacities are computed using Qext values at 1µm. c======================================================================= c----------------------------------------------------------------------- c arguments: c ------------- INTEGER, INTENT(IN) :: ngrid,nlay REAL, INTENT(IN) :: ptimestep ! pas de temps physique (s) REAL, INTENT(IN) :: pplev(ngrid,nlay+1) ! Inter-layer pressures (Pa) REAL, INTENT(IN) :: pplay(ngrid,nlay) ! mid-layer pressures (Pa) REAL, INTENT(IN) :: pdpsrf(ngrid) ! tendency on surface pressure REAL, INTENT(IN) :: pzlay(ngrid,nlay) ! altitude at the middle of the layers REAL, INTENT(IN) :: pt(ngrid,nlay) ! temperature at the middle of the layers (K) REAL, INTENT(IN) :: pdt(ngrid,nlay) ! tendency on temperature from other parametrizations real, INTENT(IN) :: pq(ngrid,nlay,nq) ! tracers (kg/kg) real, INTENT(IN) :: pdq(ngrid,nlay,nq) ! tendencies before condensation (kg/kg.s-1) real, intent(OUT) :: pdqcloudco2(ngrid,nlay,nq) ! tendency due to CO2 condensation (kg/kg.s-1) real, intent(OUT) :: pcondicea(ngrid,nlay) real, intent(OUT) :: pdtcloudco2(ngrid,nlay) ! tendency on temperature due to latent heat INTEGER, INTENT(IN) :: nq ! number of tracers REAL, INTENT(IN) :: tau(ngrid,naerkind) ! Column dust optical depth at each point REAL, INTENT(IN) :: tauscaling(ngrid) ! Convertion factor for dust amount REAL, INTENT(OUT) :: rdust(ngrid,nlay) ! Dust geometric mean radius (m) real, intent(OUT) :: rice(ngrid,nlay) ! Water Ice mass mean radius (m) ! used for nucleation of CO2 on ice-coated ccns DOUBLE PRECISION, INTENT(out) :: riceco2(ngrid,nlay) ! Ice mass mean radius (m) ! (r_c in montmessin_2004) REAL, INTENT(IN) :: nuice(ngrid,nlay) ! Estimated effective variance ! of the size distribution real, intent(OUT) :: rsedcloudco2(ngrid,nlay) ! Cloud sedimentation radius real, intent(OUT) :: rhocloudco2(ngrid,nlay) ! Cloud density (kg.m-3) real, intent(OUT) :: rsedcloud(ngrid,nlay) ! Water Cloud sedimentation radius real, intent(OUT) :: rhocloud(ngrid,nlay) ! Water Cloud density (kg.m-3) real, intent(IN) :: pzlev(ngrid,nlay+1) ! altitude at the boundaries of the layers real, intent(OUT) :: pdqs_sedco2(ngrid) ! CO2 flux at the surface REAL, INTENT(IN) :: pdu(ngrid,nlay),pu(ngrid,nlay) !Zonal Wind: zu=pu+pdu*ptimestep c local: c ------ ! for time loop INTEGER microstep ! time subsampling step variable INTEGER, SAVE :: imicroco2 ! time subsampling for coupled water microphysics & sedimentation REAL, SAVE :: microtimestep ! integration timestep for coupled water microphysics & sedimentation ! tendency given by clouds (inside the micro loop) REAL subpdqcloudco2(ngrid,nlay,nq) ! cf. pdqcloud REAL subpdtcloudco2(ngrid,nlay) ! cf. pdtcloud ! global tendency (clouds+physics) REAL sum_subpdq(ngrid,nlay,nq) ! cf. pdqcloud REAL sum_subpdt(ngrid,nlay) ! cf. pdtcloud real wq(ngrid,nlay+1) ! ! displaced tracer mass (kg.m-2) during microtimestep because sedim (?/m-2) REAL satuco2(ngrid,nlay) ! co2 satu ratio for output REAL zqsatco2(ngrid,nlay) ! saturation co2 DOUBLE PRECISION rho_ice_co2T(ngrid,nlay) !T-dependant CO2 ice density DOUBLE PRECISION :: myT ! temperature scalar for co2 density computation INTEGER iq,ig,l,i LOGICAL,SAVE :: firstcall=.true. DOUBLE PRECISION Nccnco2, Niceco2,Nco2,Qccnco2 real :: beta ! for sedimentation real epaisseur (ngrid,nlay) ! Layer thickness (m) real masse (ngrid,nlay) ! Layer mass (kg.m-2) real ztsed(ngrid,nlay) ! tracers with real-time value in microtimeloop real zqsed(ngrid,nlay,nq) real zqsed0(ngrid,nlay,nq) !For sedimentation tendancy real subpdqsed(ngrid,nlay,nq) real sum_subpdqs_sedco2(ngrid) ! CO2 flux at the surface ! What we need for Qext reading and tau computation : size distribution DOUBLE PRECISION vrat_cld ! Volume ratio DOUBLE PRECISION, SAVE :: rb_cldco2(nbinco2_cld+1) ! boundary values of each rad_cldco2 bin (m) DOUBLE PRECISION, PARAMETER :: rmin_cld = 1.e-9 ! Minimum radius (m) DOUBLE PRECISION, PARAMETER :: rmax_cld = 5.e-6 ! Maximum radius (m) DOUBLE PRECISION, PARAMETER :: rbmin_cld =1.e-10! Minimum boundary radius (m) DOUBLE PRECISION, PARAMETER :: rbmax_cld = 2.e-4 ! Maximum boundary radius (m) DOUBLE PRECISION dr_cld(nbinco2_cld) ! width of each rad_cldco2 bin (m) DOUBLE PRECISION vol_cld(nbinco2_cld) ! particle volume for each bin (m3) REAL, SAVE :: sigma_iceco2 ! Variance of the ice and CCN distributions logical :: file_ok !Qext file reading double precision :: radv(10000),Qextv1mic(10000) double precision, save :: Qext1bins(100) double precision :: Qtemp double precision :: ltemp1(10000),ltemp2(10000) integer :: nelem,lebon1,lebon2 integer,parameter :: uQext=555 DOUBLE PRECISION n_aer(nbinco2_cld),Rn,No,n_derf,dev2 DOUBLE PRECISION Qext1bins2(ngrid,nlay) DOUBLE PRECISION tau1mic(ngrid) !co2 ice column opacity at 1µm ! For sub grid T distribution REAL zt(ngrid,nlay) ! local value of temperature REAL :: zq(ngrid, nlay,nq) real :: rhocloudco2t(ngrid,nlay) ! Cloud density (kg.m-3) DOUBLE PRECISION :: tcond(ngrid,nlay) !CO2 condensation temperature REAL :: zqvap(ngrid,nlay) REAL :: zqice(ngrid,nlay) REAL :: spant,zdelt ! delta T for the temperature distribution REAL :: pteff(ngrid, nlay)! effective temperature in the cloud,neb REAL :: pqeff(ngrid, nlay, nq)! effective tracers quantities in the cloud REAL :: co2cloudfrac(ngrid,nlay) ! cloud fraction REAL :: mincloud ! min cloud frac DOUBLE PRECISION:: rho,zu,NN,gradT !For Saturation Index computation DOUBLE PRECISION :: SatIndex(ngrid,nlay),SatIndexmap(ngrid) c D. BARDET : sensibility test REAL :: No_dust(ngrid,nlay) REAL :: Mo_dust(ngrid,nlay) c logical :: CLFvaryingCO2 c ** un petit test de coherence c -------------------------- IF (firstcall) THEN if (nq.gt.nqmx) then write(*,*) 'stop in co2cloud (nq.gt.nqmx)!' write(*,*) 'nq=',nq,' nqmx=',nqmx stop endif write(*,*) "co2cloud.F: rho_ice_co2 = ",rho_ice_co2 write(*,*) "co2cloud: igcm_co2=",igcm_co2 write(*,*) " igcm_co2_ice=",igcm_co2_ice write(*,*) "time subsampling for microphysic ?" #ifdef MESOSCALE imicroco2 = 2 #else imicroco2 = 30 #endif call getin("imicroco2",imicroco2) write(*,*)"imicroco2 = ",imicroco2 microtimestep = ptimestep/real(imicroco2) write(*,*)"Physical timestep is",ptimestep write(*,*)"CO2 Microphysics timestep is",microtimestep c Compute the size bins of the distribution of CO2 ice particles c --> used for opacity calculations c rad_cldco2 is the primary radius grid used for microphysics computation. c The grid spacing is computed assuming a constant volume ratio c between two consecutive bins; i.e. vrat_cld. c vrat_cld is determined from the boundary values of the size grid: c rmin_cld and rmax_cld. c The rb_cldco2 array contains the boundary values of each rad_cldco2 bin. c dr_cld is the width of each rad_cldco2 bin. sigma_iceco2 = sqrt(log(1.+nuiceco2_sed)) c Volume ratio between two adjacent bins ! vrat_cld vrat_cld = log(rmax_cld/rmin_cld) / float(nbinco2_cld-1) *3. vrat_cld = exp(vrat_cld) rb_cldco2(1) = rbmin_cld rad_cldco2(1) = rmin_cld vol_cld(1) = 4./3. * dble(pi) * rmin_cld*rmin_cld*rmin_cld do i=1,nbinco2_cld-1 rad_cldco2(i+1) = rad_cldco2(i) * vrat_cld**(1./3.) vol_cld(i+1) = vol_cld(i) * vrat_cld enddo do i=1,nbinco2_cld rb_cldco2(i+1)= ( (2.*vrat_cld) / (vrat_cld+1.) )**(1./3.) * & rad_cldco2(i) dr_cld(i) = rb_cldco2(i+1) - rb_cldco2(i) enddo rb_cldco2(nbinco2_cld+1) = rbmax_cld dr_cld(nbinco2_cld) = rb_cldco2(nbinco2_cld+1) - & rb_cldco2(nbinco2_cld) c read the Qext values INQUIRE(FILE=TRIM(datadir)// & '/optprop_co2ice_1mic.dat', EXIST=file_ok) IF (.not. file_ok) THEN write(*,*) 'file optprop_co2ice_1mic.dat should be in ' & ,trim(datadir) STOP endif ! open(newunit=uQext,file=trim(datadir)// open(unit=uQext,file=trim(datadir)// & '/optprop_co2ice_1mic.dat' & ,FORM='formatted') read(uQext,*) !skip 1 line do i=1,10000 read(uQext,'(E11.5)') radv(i) enddo read(uQext,*) !skip 1 line do i=1,10000 read(uQext,'(E11.5)') Qextv1mic(i) enddo close(uQext) c innterpol the Qext values !rice_out=rad_cldco2 do i=1,nbinco2_cld ltemp1=abs(radv(:)-rb_cldco2(i)) ltemp2=abs(radv(:)-rb_cldco2(i+1)) lebon1=minloc(ltemp1,DIM=1) lebon2=min(minloc(ltemp2,DIM=1),10000) nelem=lebon2-lebon1+1. Qtemp=0d0 do l=0,nelem Qtemp=Qtemp+Qextv1mic(min(lebon1+l,10000)) !mean value in the interval enddo Qtemp=Qtemp/nelem Qext1bins(i)=Qtemp enddo Qext1bins(:)=Qext1bins(:)*rad_cldco2(:)*rad_cldco2(:)*pi ! The actuall tau computation and output is performed in co2cloud.F print*,'--------------------------------------------' print*,'Microphysics co2: size bin-Qext information:' print*,' i, rad_cldco2(i), Qext1bins(i)' do i=1,nbinco2_cld write(*,'(i3,3x,3(e13.6,4x))') i, rad_cldco2(i), & Qext1bins(i) enddo print*,'--------------------------------------------' do i=1,nbinco2_cld+1 rb_cldco2(i) = log(rb_cldco2(i)) !! we save that so that it is not computed at each timestep and gridpoint enddo if (CLFvaryingCO2) then write(*,*) write(*,*) "CLFvaryingCO2 is set to true is callphys.def" write(*,*) "The temperature field is enlarged to +/-",spantCO2 write(*,*) "for the CO2 microphysics " endif firstcall=.false. ENDIF ! of IF (firstcall) c =========================================================================== c Initialization c =========================================================================== dev2 = 1. / ( sqrt(2.) * sigma_iceco2 ) beta=0.85 sum_subpdq(1:ngrid,1:nlay,1:nq) = 0 sum_subpdt(1:ngrid,1:nlay) = 0 subpdqcloudco2(1:ngrid,1:nlay,1:nq) = 0 subpdtcloudco2(1:ngrid,1:nlay) = 0 wq(:,:)=0 ! default value if no ice rhocloudco2(1:ngrid,1:nlay) = rho_dust rhocloudco2t(1:ngrid,1:nlay) = rho_dust epaisseur(1:ngrid,1:nlay)=0 masse(1:ngrid,1:nlay)=0 zqsed0(1:ngrid,1:nlay,1:nq)=0 sum_subpdqs_sedco2(1:ngrid)=0 subpdqsed(1:ngrid,1:nlay,1:nq)=0 do l=1,nlay do ig=1, ngrid masse(ig,l)=(pplev(ig,l) - pplev(ig,l+1)) /g epaisseur(ig,l)= pzlev(ig,l+1) - pzlev(ig,l) enddo enddo c ========================================================================== c 0. Representation of sub-grid water ice clouds c ========================================================================== IF (CLFvaryingCO2) THEN spant=spantCO2 ! delta T for the temprature distribution mincloud=0.1 ! min co2cloudfrac when there is ice pteff(:,:)=pt(:,:) co2cloudfrac(:,:)=mincloud c Tendencies DO l=1,nlay DO ig=1,ngrid zt(ig,l)=pt(ig,l)+ pdt(ig,l)*ptimestep ENDDO ENDDO DO l=1,nlay DO ig=1,ngrid DO iq=1,nq zq(ig,l,iq)=pq(ig,l,iq)+pdq(ig,l,iq)*ptimestep ENDDO ENDDO ENDDO zqvap=zq(:,:,igcm_co2) zqice=zq(:,:,igcm_co2_ice) call WRITEDIAGFI(ngrid,"co2cloud_pzlev","pzlev","km",3, & pzlev) call WRITEDIAGFI(ngrid,"co2cloud_pzlay","pzlay","km",3, & pzlay) call WRITEDIAGFI(ngrid,"co2cloud_pplay","pplay","Pa",3, & pplay) if (satindexco2) then !logical in callphys.def DO l=12,26 ! layers 12 --> 26 ~ 12->85 km DO ig=1,ngrid ! compute N^2 static stability gradT=(zt(ig,l+1)-zt(ig,l))/(pzlev(ig,l+1)-pzlev(ig,l)) NN=sqrt(g/zt(iq,l)*(max(gradT,-g/cpp)+g/cpp)) ! compute absolute value of zonal wind field zu=abs(pu(ig,l) + pdu(ig,l)*ptimestep) ! compute background density rho=pplay(ig,l)/(rnew(ig,l)*zt(ig,l)) !saturation index SatIndex(ig,l)=sqrt(7.5e-7*150.e3/(2.*pi)*NN/ & (rho*zu*zu*zu)) ENDDO ENDDO !Then compute Satindex map ! layers 12 --> 26 ~ 12->85 km DO ig=1,ngrid SatIndexmap(ig)=maxval(SatIndex(ig,12:26)) ENDDO call WRITEDIAGFI(ngrid,"SatIndexmap","SatIndexmap","km",2, & SatIndexmap) else do ig=1,ngrid SatIndexmap(ig)=0.05 !maxval(SatIndex(ig,12:26)) enddo endif ! of if (satindexco2) !Modulate the DeltaT by GW propagation index : ! Saturation index S in Spiga 2012 paper !Assuming like in the paper, !GW phase speed (stationary waves) c=0 m.s-1 !lambdaH =150 km !Fo=7.5e-7 J.m-3 CALL tcondco2(ngrid,nlay,pplay,zqvap,tcond) zdelt=spant DO ig=1,ngrid IF (SatIndexmap(ig) .le. 0.1) THEN DO l=1,nlay-1 IF (tcond(ig,l) .ge. (zt(ig,l)+zdelt) & .or. tcond(ig,l) .le. 0 ) THEN !The entire fraction is saturated pteff(ig,l)=zt(ig,l) co2cloudfrac(ig,l)=1. ELSE IF (tcond(ig,l) .le. (zt(ig,l)-zdelt)) THEN ! No saturation at all pteff(ig,l)=zt(ig,l)-zdelt co2cloudfrac(ig,l)=mincloud ELSE co2cloudfrac(ig,l)=(tcond(ig,l)-zt(ig,l)+zdelt)/ & (2.0*zdelt) pteff(ig,l)=(tcond(ig,l)+zt(ig,l)-zdelt)/2. !Mean temperature of the cloud fraction END IF !ig if (tcond(ig,l) ... pteff(ig,l)=pteff(ig,l)-pdt(ig,l)*ptimestep IF (co2cloudfrac(ig,l).le. mincloud) THEN co2cloudfrac(ig,l)=mincloud ELSE IF (co2cloudfrac(ig,l).gt. 1) THEN co2cloudfrac(ig,l)=1. END IF ENDDO ELSE ! SatIndex not favorable for GW : leave pt untouched pteff(ig,l)=pt(ig,l) co2cloudfrac(ig,l)=mincloud ENDIF ! of if(SatIndexmap... ENDDO ! of DO ig=1,ngrid ! Totalcloud frac of the column missing here c c No sub-grid cloud representation (CLFvarying=false) ELSE DO l=1,nlay DO ig=1,ngrid pteff(ig,l)=pt(ig,l) END DO END DO END IF ! end if (CLFvaryingco2) c ============================================================================= c microtimestep timeloop for microphysics: c 0.Stepped entry for tendancies c 1.Compute sedimentation and update tendancies c 2.Call co2clouds microphysics c 3.Update tendancies c ============================================================================= DO microstep=1,imicroco2 c Temperature tendency subpdt ! If imicro=1 subpdt is the same as pdt DO l=1,nlay DO ig=1,ngrid sum_subpdt(ig,l) = sum_subpdt(ig,l) & + pdt(ig,l) ! At each micro timestep we add pdt in order to have a stepped entry sum_subpdq(ig,l,igcm_dust_mass) = & sum_subpdq(ig,l,igcm_dust_mass) & + pdq(ig,l,igcm_dust_mass) sum_subpdq(ig,l,igcm_dust_number) = & sum_subpdq(ig,l,igcm_dust_number) & + pdq(ig,l,igcm_dust_number) sum_subpdq(ig,l,igcm_ccnco2_mass) = & sum_subpdq(ig,l,igcm_ccnco2_mass) & + pdq(ig,l,igcm_ccnco2_mass) sum_subpdq(ig,l,igcm_ccnco2_number) = & sum_subpdq(ig,l,igcm_ccnco2_number) & + pdq(ig,l,igcm_ccnco2_number) sum_subpdq(ig,l,igcm_co2_ice) = & sum_subpdq(ig,l,igcm_co2_ice) & + pdq(ig,l,igcm_co2_ice) sum_subpdq(ig,l,igcm_co2) = & sum_subpdq(ig,l,igcm_co2) & + pdq(ig,l,igcm_co2) c D.BARDET : if (co2useh2o) then sum_subpdq(ig,l,igcm_h2o_ice) = & sum_subpdq(ig,l,igcm_h2o_ice) & + pdq(ig,l,igcm_h2o_ice) sum_subpdq(ig,l,igcm_ccn_mass) = & sum_subpdq(ig,l,igcm_ccn_mass) & + pdq(ig,l,igcm_ccn_mass) sum_subpdq(ig,l,igcm_ccn_number) = & sum_subpdq(ig,l,igcm_ccn_number) & + pdq(ig,l,igcm_ccn_number) endif ENDDO ENDDO c Effective tracers quantities in the cloud fraction IF (CLFvaryingCO2) THEN pqeff(:,:,:)=pq(:,:,:) ! prevent from buggs (A. Pottier) pqeff(:,:,igcm_ccnco2_mass) =pq(:,:,igcm_ccnco2_mass)/ & co2cloudfrac(:,:) pqeff(:,:,igcm_ccnco2_number)= & pq(:,:,igcm_ccnco2_number)/co2cloudfrac(:,:) pqeff(:,:,igcm_co2_ice)= pq(:,:,igcm_co2_ice)/ & co2cloudfrac(:,:) ELSE pqeff(:,:,:)=pq(:,:,:) END IF c ======================================================================== c 1.SEDIMENTATION : update tracers, compute parameters, c call to sedimentation routine, update tendancies c ======================================================================== IF (sedimentation) THEN DO l=1, nlay DO ig=1,ngrid ztsed(ig,l)=pteff(ig,l) & +sum_subpdt(ig,l)*microtimestep zqsed(ig,l,:)=pqeff(ig,l,:) & +sum_subpdq(ig,l,:)*microtimestep rho_ice_co2T(ig,l)=1000.*(1.72391-2.53e-4* & ztsed(ig,l)-2.87e-6* & ztsed(ig,l)*ztsed(ig,l)) rho_ice_co2=rho_ice_co2T(ig,l) Niceco2=max(zqsed(ig,l,igcm_co2_ice),1.e-30) Nccnco2=max(zqsed(ig,l,igcm_ccnco2_number), & 1.e-30) Qccnco2=max(zqsed(ig,l,igcm_ccnco2_mass), & 1.e-30) call updaterice_microco2(Niceco2, & Qccnco2,Nccnco2, & tauscaling(ig),riceco2(ig,l),rhocloudco2t(ig,l)) if (Niceco2 .le. 1.e-25 & .or. Nccnco2*tauscaling(ig) .le. 1) THEN riceco2(ig,l)=1.e-9 endif rhocloudco2t(ig,l)=min(max(rhocloudco2t(ig,l) & ,rho_ice_co2),rho_dust) rsedcloudco2(ig,l)=max(riceco2(ig,l)* & (1.+nuiceco2_sed)*(1.+nuiceco2_sed)*(1.+nuiceco2_sed), & riceco2(ig,l)) ENDDO ENDDO ! Gravitational sedimentation zqsed0(:,:,igcm_co2_ice)=zqsed(:,:,igcm_co2_ice) zqsed0(:,:,igcm_ccnco2_mass)=zqsed(:,:,igcm_ccnco2_mass) zqsed0(:,:,igcm_ccnco2_number)=zqsed(:,:,igcm_ccnco2_number) ! We save actualized tracer values to compute sedimentation tendancies call newsedim(ngrid,nlay,ngrid*nlay,ngrid*nlay, & microtimestep,pplev,masse,epaisseur,ztsed, & rsedcloudco2,rhocloudco2t, & zqsed(:,:,igcm_co2_ice),wq,beta) ! 3 traceurs ! sedim at the surface of co2 ice : keep track of it for physiq_mod do ig=1,ngrid sum_subpdqs_sedco2(ig)= & sum_subpdqs_sedco2(ig)+ wq(ig,1)/microtimestep end do call newsedim(ngrid,nlay,ngrid*nlay,ngrid*nlay, & microtimestep,pplev,masse,epaisseur,ztsed, & rsedcloudco2,rhocloudco2t, & zqsed(:,:,igcm_ccnco2_mass),wq,beta) call newsedim(ngrid,nlay,ngrid*nlay,ngrid*nlay, & microtimestep,pplev,masse,epaisseur,ztsed, & rsedcloudco2,rhocloudco2t, & zqsed(:,:,igcm_ccnco2_number),wq,beta) DO l = 1, nlay !Compute tendencies DO ig=1,ngrid subpdqsed(ig,l,igcm_ccnco2_mass)= & (zqsed(ig,l,igcm_ccnco2_mass)- & zqsed0(ig,l,igcm_ccnco2_mass))/microtimestep subpdqsed(ig,l,igcm_ccnco2_number)= & (zqsed(ig,l,igcm_ccnco2_number)- & zqsed0(ig,l,igcm_ccnco2_number))/microtimestep subpdqsed(ig,l,igcm_co2_ice)= & (zqsed(ig,l,igcm_co2_ice)- & zqsed0(ig,l,igcm_co2_ice))/microtimestep ENDDO ENDDO ! update subtimestep tendencies with sedimentation input DO l=1,nlay DO ig=1,ngrid sum_subpdq(ig,l,igcm_ccnco2_mass) = & sum_subpdq(ig,l,igcm_ccnco2_mass) & +subpdqsed(ig,l,igcm_ccnco2_mass) sum_subpdq(ig,l,igcm_ccnco2_number) = & sum_subpdq(ig,l,igcm_ccnco2_number) & +subpdqsed(ig,l,igcm_ccnco2_number) sum_subpdq(ig,l,igcm_co2_ice) = & sum_subpdq(ig,l,igcm_co2_ice) & +subpdqsed(ig,l,igcm_co2_ice) ENDDO ENDDO END IF !(end if sedimentation) c ============================================================================== c 2. Main call to the cloud schemes: c ============================================================================== CALL improvedco2clouds(ngrid,nlay,microtimestep, & pplay,pplev,pteff,sum_subpdt, & pqeff,sum_subpdq,subpdqcloudco2,subpdtcloudco2, & nq,tauscaling,mem_Mccn_co2,mem_Mh2o_co2,mem_Nccn_co2, & No_dust,Mo_dust) c D. BARDET: sensibility test c call WRITEDIAGFI(ngrid,"No_dust","Nombre particules de poussiere" c & ,"part/kg",3,No_dust) c call WRITEDIAGFI(ngrid,"Mo_dust","Masse particules de poussiere" c & ,"kg/kg ",3,Mo_dust) c ============================================================================== c 3. Updating tendencies after cloud scheme: c ============================================================================== DO l=1,nlay DO ig=1,ngrid sum_subpdt(ig,l) = & sum_subpdt(ig,l) + subpdtcloudco2(ig,l) sum_subpdq(ig,l,igcm_dust_mass) = & sum_subpdq(ig,l,igcm_dust_mass) & + subpdqcloudco2(ig,l,igcm_dust_mass) sum_subpdq(ig,l,igcm_dust_number) = & sum_subpdq(ig,l,igcm_dust_number) & + subpdqcloudco2(ig,l,igcm_dust_number) sum_subpdq(ig,l,igcm_ccnco2_mass) = & sum_subpdq(ig,l,igcm_ccnco2_mass) & + subpdqcloudco2(ig,l,igcm_ccnco2_mass) sum_subpdq(ig,l,igcm_ccnco2_number) = & sum_subpdq(ig,l,igcm_ccnco2_number) & + subpdqcloudco2(ig,l,igcm_ccnco2_number) sum_subpdq(ig,l,igcm_co2_ice) = & sum_subpdq(ig,l,igcm_co2_ice) & + subpdqcloudco2(ig,l,igcm_co2_ice) sum_subpdq(ig,l,igcm_co2) = & sum_subpdq(ig,l,igcm_co2) & + subpdqcloudco2(ig,l,igcm_co2) c D.BARDET : if (co2useh2o) then sum_subpdq(ig,l,igcm_h2o_ice) = & sum_subpdq(ig,l,igcm_h2o_ice) & + subpdqcloudco2(ig,l,igcm_h2o_ice) sum_subpdq(ig,l,igcm_ccn_mass) = & sum_subpdq(ig,l,igcm_ccn_mass) & + subpdqcloudco2(ig,l,igcm_ccn_mass) sum_subpdq(ig,l,igcm_ccn_number) = & sum_subpdq(ig,l,igcm_ccn_number) & + subpdqcloudco2(ig,l,igcm_ccn_number) endif ENDDO ENDDO ENDDO ! of DO microstep=1,imicro c------------------------------------------------ c Compute final tendencies after time loop: c------------------------------------------------ c Condensation/sublimation tendency after clouds scheme (to replace c zcondicea in newcondens.F DO l=nlay, 1, -1 DO ig = 1, ngrid pcondicea(ig,l) = sum_subpdq(ig,l,igcm_co2_ice) & /real(imicroco2) ENDDO ENDDO c CO2 flux at surface (kg.m-2.s-1) do ig=1,ngrid pdqs_sedco2(ig)=sum_subpdqs_sedco2(ig)/real(imicroco2) enddo c Temperature tendency pdtcloud DO l=1,nlay DO ig=1,ngrid pdtcloudco2(ig,l) = & sum_subpdt(ig,l)/real(imicroco2)-pdt(ig,l) ENDDO ENDDO c Tracers tendencies pdqcloud DO l=1,nlay DO ig=1,ngrid pdqcloudco2(ig,l,igcm_co2_ice) = & sum_subpdq(ig,l,igcm_co2_ice)/real(imicroco2) & - pdq(ig,l,igcm_co2_ice) pdqcloudco2(ig,l,igcm_co2) = & sum_subpdq(ig,l,igcm_co2)/real(imicroco2) & - pdq(ig,l,igcm_co2) c D.BARDET : if (co2useh2o) then pdqcloudco2(ig,l,igcm_h2o_ice) = & sum_subpdq(ig,l,igcm_h2o_ice)/real(imicroco2) & - pdq(ig,l,igcm_h2o_ice) pdqcloudco2(ig,l,igcm_ccn_mass) = & sum_subpdq(ig,l,igcm_ccn_mass)/real(imicroco2) & - pdq(ig,l,igcm_ccn_mass) pdqcloudco2(ig,l,igcm_ccn_number) = & sum_subpdq(ig,l,igcm_ccn_number)/real(imicroco2) & - pdq(ig,l,igcm_ccn_number) endif pdqcloudco2(ig,l,igcm_ccnco2_mass) = & sum_subpdq(ig,l,igcm_ccnco2_mass)/real(imicroco2) & - pdq(ig,l,igcm_ccnco2_mass) pdqcloudco2(ig,l,igcm_ccnco2_number) = & sum_subpdq(ig,l,igcm_ccnco2_number)/real(imicroco2) & - pdq(ig,l,igcm_ccnco2_number) pdqcloudco2(ig,l,igcm_dust_mass) = & sum_subpdq(ig,l,igcm_dust_mass)/real(imicroco2) & - pdq(ig,l,igcm_dust_mass) pdqcloudco2(ig,l,igcm_dust_number) = & sum_subpdq(ig,l,igcm_dust_number)/real(imicroco2) & - pdq(ig,l,igcm_dust_number) ENDDO ENDDO c Due to stepped entry, other processes tendencies can add up to negative values c Therefore, enforce positive values and conserve mass DO l=1,nlay DO ig=1,ngrid IF ((pqeff(ig,l,igcm_ccnco2_number) + & ptimestep* (pdq(ig,l,igcm_ccnco2_number) + & pdqcloudco2(ig,l,igcm_ccnco2_number)) & .lt. 1.) & .or. (pqeff(ig,l,igcm_ccnco2_mass) + & ptimestep* (pdq(ig,l,igcm_ccnco2_mass) + & pdqcloudco2(ig,l,igcm_ccnco2_mass)) & .lt. 1.e-20)) THEN pdqcloudco2(ig,l,igcm_ccnco2_number) = & - pqeff(ig,l,igcm_ccnco2_number)/ptimestep & - pdq(ig,l,igcm_ccnco2_number)+1. pdqcloudco2(ig,l,igcm_dust_number) = & -pdqcloudco2(ig,l,igcm_ccnco2_number) pdqcloudco2(ig,l,igcm_ccnco2_mass) = & - pqeff(ig,l,igcm_ccnco2_mass)/ptimestep & - pdq(ig,l,igcm_ccnco2_mass)+1.e-20 pdqcloudco2(ig,l,igcm_dust_mass) = & -pdqcloudco2(ig,l,igcm_ccnco2_mass) ENDIF ENDDO ENDDO DO l=1,nlay DO ig=1,ngrid IF ( (pqeff(ig,l,igcm_dust_number) + & ptimestep* (pdq(ig,l,igcm_dust_number) + & pdqcloudco2(ig,l,igcm_dust_number)) .le. 1.) & .or. (pqeff(ig,l,igcm_dust_mass)+ & ptimestep* (pdq(ig,l,igcm_dust_mass) + & pdqcloudco2(ig,l,igcm_dust_mass)) & .le. 1.e-20)) then pdqcloudco2(ig,l,igcm_dust_number) = & - pqeff(ig,l,igcm_dust_number)/ptimestep & - pdq(ig,l,igcm_dust_number)+1. pdqcloudco2(ig,l,igcm_ccnco2_number) = & -pdqcloudco2(ig,l,igcm_dust_number) pdqcloudco2(ig,l,igcm_dust_mass) = & - pqeff(ig,l,igcm_dust_mass)/ptimestep & - pdq(ig,l,igcm_dust_mass) +1.e-20 pdqcloudco2(ig,l,igcm_ccnco2_mass) = & -pdqcloudco2(ig,l,igcm_dust_mass) ENDIF ENDDO ENDDO ! pq+ptime*(pdq+pdqc)=1 ! pdqc=1-pq/ptime-pdq DO l=1,nlay DO ig=1,ngrid IF (pqeff(ig,l,igcm_co2_ice) + ptimestep* & (pdq(ig,l,igcm_co2_ice) + pdqcloudco2(ig,l,igcm_co2_ice)) & .lt. 1.e-15) THEN pdqcloudco2(ig,l,igcm_co2_ice) = & - pqeff(ig,l,igcm_co2_ice)/ptimestep-pdq(ig,l,igcm_co2_ice) pdqcloudco2(ig,l,igcm_co2) = -pdqcloudco2(ig,l,igcm_co2_ice) ENDIF IF (pqeff(ig,l,igcm_co2) + ptimestep* & (pdq(ig,l,igcm_co2) + pdqcloudco2(ig,l,igcm_co2)) & .lt. 0.1) THEN pdqcloudco2(ig,l,igcm_co2) = & - pqeff(ig,l,igcm_co2)/ptimestep - pdq(ig,l,igcm_co2) pdqcloudco2(ig,l,igcm_co2_ice)= -pdqcloudco2(ig,l,igcm_co2) ENDIF ENDDO ENDDO c Update clouds parameters values in the cloud fraction (for output) DO l=1, nlay DO ig=1,ngrid Niceco2=pqeff(ig,l,igcm_co2_ice) + & (pdq(ig,l,igcm_co2_ice) + & pdqcloudco2(ig,l,igcm_co2_ice))*ptimestep Nco2=pqeff(ig,l,igcm_co2) + & (pdq(ig,l,igcm_co2) + & pdqcloudco2(ig,l,igcm_co2))*ptimestep Nccnco2=max((pqeff(ig,l,igcm_ccnco2_number) + & (pdq(ig,l,igcm_ccnco2_number) + & pdqcloudco2(ig,l,igcm_ccnco2_number))*ptimestep) & ,1.e-30) Qccnco2=max((pqeff(ig,l,igcm_ccnco2_mass) + & (pdq(ig,l,igcm_ccnco2_mass) + & pdqcloudco2(ig,l,igcm_ccnco2_mass))*ptimestep) & ,1.e-30) myT=pteff(ig,l)+(pdt(ig,l)+pdtcloudco2(ig,l))*ptimestep rho_ice_co2T(ig,l)=1000.*(1.72391-2.53e-4* & myT-2.87e-6* myT* myT) rho_ice_co2=rho_ice_co2T(ig,l) c rho_ice_co2 is shared by tracer_mod and used in updaterice c Compute particle size call updaterice_microco2(Niceco2, & Qccnco2,Nccnco2, & tauscaling(ig),riceco2(ig,l),rhocloudco2(ig,l)) if ( (Niceco2 .le. 1.e-25 .or. & Nccnco2*tauscaling(ig) .le. 1.) )THEN riceco2(ig,l)=0. Qext1bins2(ig,l)=0. else c Compute opacities No=Nccnco2*tauscaling(ig) Rn=-dlog(riceco2(ig,l)) n_derf = erf( (rb_cldco2(1)+Rn) *dev2) Qext1bins2(ig,l)=0. do i = 1, nbinco2_cld n_aer(i) = -0.5 * No * n_derf !! this ith previously computed n_derf = erf((rb_cldco2(i+1)+Rn) *dev2) n_aer(i) = n_aer(i) + 0.5 * No * n_derf Qext1bins2(ig,l)=Qext1bins2(ig,l)+Qext1bins(i)*n_aer(i) enddo endif c D.BARDET : update rice water only if co2 use h2o ice as CCN if (co2useh2o) then call updaterice_micro( & pqeff(ig,l,igcm_h2o_ice) + ! ice mass & (pdq(ig,l,igcm_h2o_ice) + ! ice mass & pdqcloudco2(ig,l,igcm_h2o_ice))*ptimestep, ! ice mass & pqeff(ig,l,igcm_ccn_mass) + ! ccn mass & (pdq(ig,l,igcm_ccn_mass) + ! ccn mass & pdqcloudco2(ig,l,igcm_ccn_mass))*ptimestep, ! ccn mass & pqeff(ig,l,igcm_ccn_number) + ! ccn number & (pdq(ig,l,igcm_ccn_number) + ! ccn number & pdqcloudco2(ig,l,igcm_ccn_number))*ptimestep, ! ccn number & tauscaling(ig),rice(ig,l),rhocloud(ig,l)) endif call updaterdust( & pqeff(ig,l,igcm_dust_mass) + ! dust mass & (pdq(ig,l,igcm_dust_mass) + ! dust mass & pdqcloudco2(ig,l,igcm_dust_mass))*ptimestep, ! dust mass & pqeff(ig,l,igcm_dust_number) + ! dust number & (pdq(ig,l,igcm_dust_number) + ! dust number & pdqcloudco2(ig,l,igcm_dust_number))*ptimestep, ! dust number & rdust(ig,l)) ENDDO ENDDO c ====================================================================== c A correction if a lot of subliming CO2 fills the 1st layer FF04/2005 c Then that should not affect the ice particle radius c ====================================================================== do ig=1,ngrid if(pdpsrf(ig)*ptimestep.gt.0.9*(pplev(ig,1)-pplev(ig,2)))then if(pdpsrf(ig)*ptimestep.gt.0.9*(pplev(ig,1)-pplev(ig,3))) & riceco2(ig,2)=riceco2(ig,3) riceco2(ig,1)=riceco2(ig,2) endif end do DO l=1,nlay DO ig=1,ngrid rsedcloud(ig,l)=max(rice(ig,l)* & (1.+nuice_sed)*(1.+nuice_sed)*(1.+nuice_sed), & rdust(ig,l)) ! rsedcloud(ig,l)=min(rsedcloud(ig,l),1.e-4) ENDDO ENDDO DO l=1,nlay DO ig=1,ngrid rsedcloudco2(ig,l)=max(riceco2(ig,l)* & (1.+nuiceco2_sed)*(1.+nuiceco2_sed)*(1.+nuiceco2_sed), & rdust(ig,l)) c rsedcloudco2(ig,l)=min(rsedcloudco2(ig,l),1.e-5) ENDDO ENDDO call co2sat(ngrid*nlay,pteff+(pdt+pdtcloudco2)*ptimestep & ,pplay,zqsatco2) do l=1,nlay do ig=1,ngrid satuco2(ig,l) = (pqeff(ig,l,igcm_co2) + & (pdq(ig,l,igcm_co2) + & pdqcloudco2(ig,l,igcm_co2))*ptimestep)* & (mmean(ig,l)/44.01)*pplay(ig,l)/zqsatco2(ig,l) enddo enddo ! Everything modified by CO2 microphysics must be wrt co2cloudfrac IF (CLFvaryingCO2) THEN DO l=1,nlay DO ig=1,ngrid pdqcloudco2(ig,l,igcm_ccnco2_mass)= & pdqcloudco2(ig,l,igcm_ccnco2_mass)*co2cloudfrac(ig,l) pdqcloudco2(ig,l,igcm_ccnco2_number)= & pdqcloudco2(ig,l,igcm_ccnco2_number)*co2cloudfrac(ig,l) pdqcloudco2(ig,l,igcm_dust_mass)= & pdqcloudco2(ig,l,igcm_dust_mass)*co2cloudfrac(ig,l) pdqcloudco2(ig,l,igcm_dust_number)= & pdqcloudco2(ig,l,igcm_dust_number)*co2cloudfrac(ig,l) c D.BARDET if (co2useh2o) then pdqcloudco2(ig,l,igcm_h2o_ice)= & pdqcloudco2(ig,l,igcm_h2o_ice)*co2cloudfrac(ig,l) pdqcloudco2(ig,l,igcm_ccn_mass)= & pdqcloudco2(ig,l,igcm_ccn_mass)*co2cloudfrac(ig,l) pdqcloudco2(ig,l,igcm_ccn_number)= & pdqcloudco2(ig,l,igcm_ccn_number)*co2cloudfrac(ig,l) endif pdqcloudco2(ig,l,igcm_co2_ice)= & pdqcloudco2(ig,l,igcm_co2_ice)*co2cloudfrac(ig,l) pdqcloudco2(ig,l,igcm_co2)= & pdqcloudco2(ig,l,igcm_co2)*co2cloudfrac(ig,l) pdtcloudco2(ig,l)=pdtcloudco2(ig,l)*co2cloudfrac(ig,l) Qext1bins2(ig,l)=Qext1bins2(ig,l)*co2cloudfrac(ig,l) ENDDO ENDDO ENDIF ! opacity in mesh ig is the sum over l of Qext1bins2: Is this true ? tau1mic(:)=0. do l=1,nlay do ig=1,ngrid tau1mic(ig)=tau1mic(ig)+Qext1bins2(ig,l) enddo enddo !Outputs: call WRITEDIAGFI(ngrid,"SatIndex","SatIndex"," ",3, & SatIndex) call WRITEDIAGFI(ngrid,"satuco2","vap in satu","kg/kg",3, & satuco2) call WRITEdiagfi(ngrid,"riceco2","ice radius","m" & ,3,riceco2) call WRITEdiagfi(ngrid,"co2cloudfrac","co2 cloud fraction" & ," ",3,co2cloudfrac) call WRITEdiagfi(ngrid,"rsedcloudco2","rsed co2" & ,"m",3,rsedcloudco2) call WRITEdiagfi(ngrid,"Tau3D1mic"," co2 ice opacities" & ," ",3,Qext1bins2) call WRITEdiagfi(ngrid,"tau1mic","co2 ice opacity 1 micron" & ," ",2,tau1mic) call WRITEDIAGFI(ngrid,"mem_Nccn_co2","CCN number used by CO2" & ,"kg/kg ",3,mem_Nccn_co2) call WRITEDIAGFI(ngrid,"mem_Mccn_co2","CCN mass used by CO2" & ,"kg/kg ",3,mem_Mccn_co2) call WRITEDIAGFI(ngrid,"mem_Mh2o_co2","H2O mass in CO2 crystal" & ,"kg/kg ",3,mem_Mh2o_co2) c D.BARDET: sensibility test c call WRITEDIAGFI(ngrid,"No_dust","Nombre particules de poussiere" c & ,"part/kg",3,No_dust) c call WRITEDIAGFI(ngrid,"Mo_dust","Masse particules de poussiere" c & ,"kg/kg ",3,Mo_dust) END SUBROUTINE co2cloud c =================================================================== c Subroutines used to write variables of memory in start files c =================================================================== SUBROUTINE ini_co2cloud(ngrid,nlayer) IMPLICIT NONE INTEGER, INTENT (in) :: ngrid ! number of atmospheric columns INTEGER, INTENT (in) :: nlayer ! number of atmospheric layers allocate(mem_Nccn_co2(ngrid,nlayer)) allocate(mem_Mccn_co2(ngrid,nlayer)) allocate(mem_Mh2o_co2(ngrid,nlayer)) END SUBROUTINE ini_co2cloud c ---------------------------------- SUBROUTINE end_co2cloud IMPLICIT NONE if (allocated(mem_Nccn_co2)) deallocate(mem_Nccn_co2) if (allocated(mem_Mccn_co2)) deallocate(mem_Mccn_co2) if (allocated(mem_Mh2o_co2)) deallocate(mem_Mh2o_co2) END SUBROUTINE end_co2cloud END MODULE co2cloud_mod