;+ ; NAME: ; COLORBAR ; ; PURPOSE: ; ; The purpose of this routine is to add a color bar to the current ; graphics window. ; ; AUTHOR: ; ; FANNING SOFTWARE CONSULTING ; David Fanning, Ph.D. ; 1645 Sheely Drive ; Fort Collins, CO 80526 USA ; Phone: 970-221-0438 ; E-mail: davidf@dfanning.com ; Coyote's Guide to IDL Programming: http://www.dfanning.com/ ; ; CATEGORY: ; ; Graphics, Widgets. ; ; CALLING SEQUENCE: ; ; COLORBAR ; ; INPUTS: ; ; None. ; ; KEYWORD PARAMETERS: ; ; ANNOTATECOLOR: The name of the "annotation color" to use. The names are those for ; FSC_COLOR, and using the keyword implies that FSC_COLOR is also in ; your !PATH. If this keyword is used, the annotation color is loaded ; *after* the color bar is displayed. The color will be represented ; as theColor = FSC_COLOR(ANNOTATECOLOR, COLOR). This keyword is provide ; to maintain backward compatibility, but also to solve the problem of ; and extra line in the color bar when this kind of syntax is used in ; conjunction with the indexed (DEVICE, DECOMPOSED=0) model is used: ; ; LoadCT, 33 ; TVImage, image ; Colorbar, Color=FSC_Color('firebrick') ; ; The proper syntax for device-independent color is like this: ; ; LoadCT, 33 ; TVImage, image ; Colorbar, AnnotateColor='firebrick', Color=255 ; ; BOTTOM: The lowest color index of the colors to be loaded in ; the bar. ; ; CHARSIZE: The character size of the color bar annotations. Default is !P.Charsize. ; ; COLOR: The color index of the bar outline and characters. Default ; is !P.Color.. ; ; DIVISIONS: The number of divisions to divide the bar into. There will ; be (divisions + 1) annotations. The default is 6. ; ; FONT: Sets the font of the annotation. Hershey: -1, Hardware:0, True-Type: 1. ; ; FORMAT: The format of the bar annotations. Default is '(I0)'. ; ; INVERTCOLORS: Setting this keyword inverts the colors in the color bar. ; ; MAXRANGE: The maximum data value for the bar annotation. Default is ; NCOLORS. ; ; MINRANGE: The minimum data value for the bar annotation. Default is 0. ; ; MINOR: The number of minor tick divisions. Default is 2. ; ; NCOLORS: This is the number of colors in the color bar. ; ; NODISPLAY: COLORBAR uses FSC_COLOR to specify some of it colors. Normally, ; FSC_COLOR loads "system" colors as part of its palette of colors. ; In order to do so, it has to create an IDL widget, which in turn ; has to make a connection to the windowing system. If your program ; is being run without a window connection, then this program will ; fail. If you can live without the system colors (and most people ; don't even know they are there, to tell you the truth), then setting ; this keyword will keep them from being loaded, and you can run ; COLORBAR without a display. ; ; POSITION: A four-element array of normalized coordinates in the same ; form as the POSITION keyword on a plot. Default is ; [0.88, 0.10, 0.95, 0.90] for a vertical bar and ; [0.10, 0.88, 0.90, 0.95] for a horizontal bar. ; ; RANGE: A two-element vector of the form [min, max]. Provides an ; alternative way of setting the MINRANGE and MAXRANGE keywords. ; ; REVERSE: Setting this keyword reverses the colors in the colorbar. ; ; RIGHT: This puts the labels on the right-hand side of a vertical ; color bar. It applies only to vertical color bars. ; ; TICKNAMES: A string array of names or values for the tick marks. ; ; TITLE: This is title for the color bar. The default is to have ; no title. ; ; TOP: This puts the labels on top of the bar rather than under it. ; The keyword only applies if a horizontal color bar is rendered. ; ; VERTICAL: Setting this keyword give a vertical color bar. The default ; is a horizontal color bar. ; ; COMMON BLOCKS: ; ; None. ; ; SIDE EFFECTS: ; ; Color bar is drawn in the current graphics window. ; ; RESTRICTIONS: ; ; The number of colors available on the graphics display device (not the ; PostScript device) is used unless the NCOLORS keyword is used. ; ; Requires the FSC_COLOR program from the Coyote Library: ; ; http://www.dfanning.com/programs/fsc_color.pro ; ; EXAMPLE: ; ; To display a horizontal color bar above a contour plot, type: ; ; LOADCT, 5, NCOLORS=100 ; CONTOUR, DIST(31,41), POSITION=[0.15, 0.15, 0.95, 0.75], $ ; C_COLORS=INDGEN(25)*4, NLEVELS=25 ; COLORBAR, NCOLORS=100, POSITION=[0.15, 0.85, 0.95, 0.90] ; ; MODIFICATION HISTORY: ; ; Written by: David W. Fanning, 10 JUNE 96. ; 10/27/96: Added the ability to send output to PostScript. DWF ; 11/4/96: Substantially rewritten to go to screen or PostScript ; file without having to know much about the PostScript device ; or even what the current graphics device is. DWF ; 1/27/97: Added the RIGHT and TOP keywords. Also modified the ; way the TITLE keyword works. DWF ; 7/15/97: Fixed a problem some machines have with plots that have ; no valid data range in them. DWF ; 12/5/98: Fixed a problem in how the colorbar image is created that ; seemed to tickle a bug in some versions of IDL. DWF. ; 1/12/99: Fixed a problem caused by RSI fixing a bug in IDL 5.2. Sigh... DWF. ; 3/30/99: Modified a few of the defaults. DWF. ; 3/30/99: Used NORMAL rather than DEVICE coords for positioning bar. DWF. ; 3/30/99: Added the RANGE keyword. DWF. ; 3/30/99: Added FONT keyword. DWF ; 5/6/99: Many modifications to defaults. DWF. ; 5/6/99: Removed PSCOLOR keyword. DWF. ; 5/6/99: Improved error handling on position coordinates. DWF. ; 5/6/99. Added MINOR keyword. DWF. ; 5/6/99: Set Device, Decomposed=0 if necessary. DWF. ; 2/9/99: Fixed a problem caused by setting BOTTOM keyword, but not NCOLORS. DWF. ; 8/17/99. Fixed a problem with ambiguous MIN and MINOR keywords. DWF ; 8/25/99. I think I *finally* got the BOTTOM/NCOLORS thing sorted out. :-( DWF. ; 10/10/99. Modified the program so that current plot and map coordinates are ; saved and restored after the colorbar is drawn. DWF. ; 3/18/00. Moved a block of code to prevent a problem with color decomposition. DWF. ; 4/28/00. Made !P.Font default value for FONT keyword. DWF. ; 9/26/00. Made the code more general for scalable pixel devices. DWF. ; 1/16/01. Added INVERTCOLORS keyword. DWF. ; 5/11/04. Added TICKNAME keyword. DWF. ; 9/29/05. Added REVERSE keywords, which does the *exact* same thing as ; INVERTCOLORS, but I can never remember the latter keyword name. DWF. ; 1/2/07. Added ANNOTATECOLOR keyword. DWF. ; 4/14/07. Changed the default FORMAT to I0. DWF. ; 5/1/07. Unexpected consequence of default format change is colorbar annotations ; no longer match contour plot levels. Changed to explicit formating of ; colorbar axis labels before PLOT command. DWF. ; 5/25/07. Previous change has unanticipated effect on color bars using ; logarithmic scaling, which is not really supported, but I have an ; article on my web page describing how to do it: http://www.dfanning.com/graphics_tips/logcb.html. ; Thus, I've fixed the program to accommodate log scaling, while still not OFFICIALLY ; supporting it. DWF. ; 10/3/07. Method used to calculate TICKNAMES produces incorrect values in certain cases when ; the min and max range values are integers. Now force range values to be floats. DWF. ; 10/17/07. Accidentaly use of INTERP keyword in CONGRID results in wrong bar values for ; low NCOLORS numbers when INVERTCOLORS or REVERSE keyword is used. Removed INTERP keyword. DWF. ; 11/10/07. Finished fixing program to accommodate log scaling in ALL possible permutations. DWF. ; 8 Feb 2008. Added CRONJOB keyword and decided to use month names when I write the date. DWF. ; 8 Feb 2008. Renamed CRONJOB to NODISPLAY to better reflect its purpose. DWF. ; 21 May 2008. Changed the default CHARSIZE to !P.CHARSIZE from 1.0. DWF. ;- ; ;########################################################################### ; ; LICENSE ; ; This software is OSI Certified Open Source Software. ; OSI Certified is a certification mark of the Open Source Initiative. ; ; Copyright 2000-2008 Fanning Software Consulting. ; ; This software is provided "as-is", without any express or ; implied warranty. In no event will the authors be held liable ; for any damages arising from the use of this software. ; ; Permission is granted to anyone to use this software for any ; purpose, including commercial applications, and to alter it and ; redistribute it freely, subject to the following restrictions: ; ; 1. The origin of this software must not be misrepresented; you must ; not claim you wrote the original software. If you use this software ; in a product, an acknowledgment in the product documentation ; would be appreciated, but is not required. ; ; 2. Altered source versions must be plainly marked as such, and must ; not be misrepresented as being the original software. ; ; 3. This notice may not be removed or altered from any source distribution. ; ; For more information on Open Source Software, visit the Open Source ; web site: http://www.opensource.org. ; ;########################################################################### PRO COLORBAR, BOTTOM=bottom, CHARSIZE=charsize, COLOR=color, DIVISIONS=divisions, $ FORMAT=format, POSITION=position, MAXRANGE=maxrange, MINRANGE=minrange, NCOLORS=ncolors, $ TITLE=title, VERTICAL=vertical, TOP=top, RIGHT=right, MINOR=minor, $ RANGE=range, FONT=font, TICKLEN=ticklen, _EXTRA=extra, INVERTCOLORS=invertcolors, $ TICKNAMES=ticknames, REVERSE=reverse, ANNOTATECOLOR=annotatecolor, XLOG=xlog, YLOG=ylog, $ NODISPLAY=nodisplay compile_opt idl2 ; Return to caller on error. On_Error, 2 ; Save the current plot state. bang_p = !P bang_x = !X bang_Y = !Y bang_Z = !Z bang_Map = !Map ; Are scalable pixels available on the device? IF (!D.Flags AND 1) NE 0 THEN scalablePixels = 1 ELSE scalablePixels = 0 ; Which release of IDL is this? thisRelease = Float(!Version.Release) ; Check and define keywords. IF N_ELEMENTS(ncolors) EQ 0 THEN BEGIN ; Most display devices to not use the 256 colors available to ; the PostScript device. This presents a problem when writing ; general-purpose programs that can be output to the display or ; to the PostScript device. This problem is especially bothersome ; if you don't specify the number of colors you are using in the ; program. One way to work around this problem is to make the ; default number of colors the same for the display device and for ; the PostScript device. Then, the colors you see in PostScript are ; identical to the colors you see on your display. Here is one way to ; do it. IF scalablePixels THEN BEGIN oldDevice = !D.NAME ; What kind of computer are we using? SET_PLOT to appropriate ; display device. thisOS = !VERSION.OS_FAMILY thisOS = STRMID(thisOS, 0, 3) thisOS = STRUPCASE(thisOS) CASE thisOS of 'MAC': SET_PLOT, thisOS 'WIN': SET_PLOT, thisOS ELSE: SET_PLOT, 'X' ENDCASE ; Here is how many colors we should use. ncolors = !D.TABLE_SIZE SET_PLOT, oldDevice ENDIF ELSE ncolors = !D.TABLE_SIZE ENDIF IF N_ELEMENTS(bottom) EQ 0 THEN bottom = 0B IF N_ELEMENTS(charsize) EQ 0 THEN charsize = !P.Charsize IF N_ELEMENTS(format) EQ 0 THEN format = '(I0)' IF N_ELEMENTS(color) EQ 0 THEN color = !P.Color minrange = (N_ELEMENTS(minrange) EQ 0) ? 0. : Float(minrange) maxrange = (N_ELEMENTS(maxrange) EQ 0) ? Float(ncolors) : Float(maxrange) IF N_ELEMENTS(ticklen) EQ 0 THEN ticklen = 0.2 IF N_ELEMENTS(minor) EQ 0 THEN minor = 2 IF N_ELEMENTS(range) NE 0 THEN BEGIN minrange = Float(range[0]) maxrange = Float(range[1]) ENDIF IF N_ELEMENTS(divisions) EQ 0 THEN divisions = 6 IF N_ELEMENTS(font) EQ 0 THEN font = !P.Font IF N_ELEMENTS(title) EQ 0 THEN title = '' xlog = Keyword_Set(xlog) ylog = Keyword_Set(ylog) ; You can't have a format set *and* use ticknames. IF N_ELEMENTS(ticknames) NE 0 THEN format = "" ; If the format is NOT null, then format the ticknames yourself. IF (xlog XOR ylog) EQ 0 THEN BEGIN IF format NE "" THEN BEGIN step = (maxrange - minrange) / divisions levels = minrange > (Indgen(divisions+1) * step + minrange) < maxrange IF StrPos(StrLowCase(format), 'i') NE -1 THEN levels = Round(levels) ticknames = String(levels, Format=format) format = "" ; No formats allowed in PLOT call now that we have ticknames. ENDIF ENDIF IF KEYWORD_SET(vertical) THEN BEGIN bar = REPLICATE(1B,20) # BINDGEN(ncolors) IF Keyword_Set(invertcolors) THEN bar = Reverse(bar, 2) IF N_ELEMENTS(position) EQ 0 THEN BEGIN position = [0.88, 0.1, 0.95, 0.9] ENDIF ELSE BEGIN IF position[2]-position[0] GT position[3]-position[1] THEN BEGIN position = [position[1], position[0], position[3], position[2]] ENDIF IF position[0] GE position[2] THEN Message, "Position coordinates can't be reconciled." IF position[1] GE position[3] THEN Message, "Position coordinates can't be reconciled." ENDELSE ENDIF ELSE BEGIN bar = BINDGEN(ncolors) # REPLICATE(1B, 20) IF Keyword_Set(invertcolors) THEN bar = Reverse(bar, 1) IF N_ELEMENTS(position) EQ 0 THEN BEGIN position = [0.1, 0.88, 0.9, 0.95] ENDIF ELSE BEGIN IF position[3]-position[1] GT position[2]-position[0] THEN BEGIN position = [position[1], position[0], position[3], position[2]] ENDIF IF position[0] GE position[2] THEN Message, "Position coordinates can't be reconciled." IF position[1] GE position[3] THEN Message, "Position coordinates can't be reconciled." ENDELSE ENDELSE ; Scale the color bar. bar = BYTSCL(bar, TOP=(ncolors-1) < (255-bottom)) + bottom IF Keyword_Set(reverse) THEN BEGIN IF Keyword_Set(vertical) THEN bar = Reverse(bar,2) ELSE bar = Reverse(bar,1) ENDIF ; Get starting locations in NORMAL coordinates. xstart = position[0] ystart = position[1] ; Get the size of the bar in NORMAL coordinates. xsize = (position[2] - position[0]) ysize = (position[3] - position[1]) ; Display the color bar in the window. Sizing is ; different for PostScript and regular display. IF scalablePixels THEN BEGIN TV, bar, xstart, ystart, XSIZE=xsize, YSIZE=ysize, /Normal ENDIF ELSE BEGIN bar = CONGRID(bar, CEIL(xsize*!D.X_VSize), CEIL(ysize*!D.Y_VSize)) ; Decomposed color off if device supports it. CASE StrUpCase(!D.NAME) OF 'X': BEGIN IF thisRelease GE 5.2 THEN Device, Get_Decomposed=thisDecomposed Device, Decomposed=0 ENDCASE 'WIN': BEGIN IF thisRelease GE 5.2 THEN Device, Get_Decomposed=thisDecomposed Device, Decomposed=0 ENDCASE 'MAC': BEGIN IF thisRelease GE 5.2 THEN Device, Get_Decomposed=thisDecomposed Device, Decomposed=0 ENDCASE ELSE: ENDCASE TV, bar, xstart, ystart, /Normal ; Restore Decomposed state if necessary. CASE StrUpCase(!D.NAME) OF 'X': BEGIN IF thisRelease GE 5.2 THEN Device, Decomposed=thisDecomposed ENDCASE 'WIN': BEGIN IF thisRelease GE 5.2 THEN Device, Decomposed=thisDecomposed ENDCASE 'MAC': BEGIN IF thisRelease GE 5.2 THEN Device, Decomposed=thisDecomposed ENDCASE ELSE: ENDCASE ENDELSE ; Annotate the color bar. IF N_Elements(annotateColor) NE 0 THEN $ color = FSC_Color(annotateColor, color, NODISPLAY=Keyword_Set(nodisplay)) ;SPIGA ;SPIGA loadct, 0, /silent color=0 IF KEYWORD_SET(vertical) THEN BEGIN IF KEYWORD_SET(right) THEN BEGIN PLOT, [minrange,maxrange], [minrange,maxrange], /NODATA, XTICKS=1, $ YTICKS=divisions, XSTYLE=1, YSTYLE=9, $ POSITION=position, COLOR=color, CHARSIZE=charsize, /NOERASE, $ XTICKFORMAT='(A1)', YTICKFORMAT='(A1)', YMINOR=minor, _EXTRA=extra, $ YTICKNAME=ticknames, FONT=font, YLOG=ylog AXIS, YAXIS=1, YRANGE=[minrange, maxrange], YTICKFORMAT=format, YTICKS=divisions, $ YTICKLEN=ticklen, YSTYLE=1, COLOR=color, CHARSIZE=charsize, $ FONT=font, YTITLE=title, _EXTRA=extra, YMINOR=minor, YTICKNAME=ticknames, YLOG=ylog ENDIF ELSE BEGIN PLOT, [minrange,maxrange], [minrange,maxrange], /NODATA, XTICKS=1, $ YTICKS=divisions, YSTYLE=1, XSTYLE=1, TITLE=title, $ POSITION=position, COLOR=color, CHARSIZE=charsize, /NOERASE, $ XTICKFORMAT='(A1)', YTICKFORMAT=format, YMinor=minor, _EXTRA=extra, $ YTICKNAME=ticknames, YLOG=ylog, YTICKLEN=ticklen ENDELSE ENDIF ELSE BEGIN IF KEYWORD_SET(top) THEN BEGIN PLOT, [minrange,maxrange], [minrange,maxrange], /NODATA, XTICKS=divisions, $ YTICKS=1, XSTYLE=9, YSTYLE=1, $ POSITION=position, COLOR=color, CHARSIZE=charsize, /NOERASE, $ YTICKFORMAT='(A1)', XTICKFORMAT='(A1)', XTICKLEN=ticklen, $ XRANGE=[minrange, maxrange], FONT=font, XMINOR=minor,_EXTRA=extra, $ XTICKNAME=ticknames, XLOG=xlog AXIS, XTICKS=divisions, XSTYLE=1, COLOR=color, CHARSIZE=charsize, $ XTICKFORMAT=format, XTICKLEN=ticklen, XRANGE=[minrange, maxrange], XAXIS=1, $ FONT=font, XTITLE=title, _EXTRA=extra, XCHARSIZE=charsize, XMINOR=minor, $ XTICKNAME=ticknames, XLOG=xlog ENDIF ELSE BEGIN PLOT, [minrange,maxrange], [minrange,maxrange], /NODATA, XTICKS=divisions, $ YTICKS=1, XSTYLE=1, YSTYLE=1, TITLE=title, $ POSITION=position, COLOR=color, CHARSIZE=charsize, /NOERASE, $ YTICKFORMAT='(A1)', XTICKFORMAT=format, XTICKLEN=ticklen, $ XRANGE=[minrange, maxrange], FONT=font, XMinor=minor, _EXTRA=extra, $ XTICKNAME=ticknames, XLOG=xlog ENDELSE ENDELSE ; Restore the previous plot and map system variables. !P = bang_p !X = bang_x !Y = bang_y !Z = bang_z !Map = bang_map END