- Timestamp:
- May 13, 2020, 5:14:02 PM (5 years ago)
- Location:
- trunk/LMDZ.MARS
- Files:
-
- 7 edited
-
README (modified) (1 diff)
-
libf/dynphy_lonlat/phymars/iniphysiq_mod.F90 (modified) (2 diffs)
-
libf/phymars/callsedim_mod.F (modified) (6 diffs)
-
libf/phymars/co2condens_mod.F (modified) (4 diffs)
-
libf/phymars/dyn1d/testphys1d.F (modified) (4 diffs)
-
libf/phymars/phys_state_var_init_mod.F90 (modified) (2 diffs)
-
libf/phymars/tracer_mod.F90 (modified) (3 diffs)
Legend:
- Unmodified
- Added
- Removed
-
trunk/LMDZ.MARS/README
r2321 r2322 3030 3030 of relevent traceur.def file in deftank. 3031 3031 - Added the computation of NO nightglow. 3032 3033 == 13/05/2020 == MV 3034 Extent of the transport of the isotopic ratio implemented in the dynamics to all the Van Leer transport schemes used in the physics (for now it only concerns the tracer HDO). 3035 - libf/dynphy_lonlat/phymars/: 3036 iniphysiq_mod.F90: transmission of the content of variables describing the isotopes defined in the dynamics (precisely by dyn3d_common/infotrac.F90, which reads traceur.def) to the physics 3037 - libf/phymars/: 3038 phys_state_var_init_mod.F90, tracer_mod.F : initialisation of the variables describing the isotopes in the physics 3039 callsedim_mod.F: implementation of the transport of the isotopic ratio in the Van Leer scheme used for sedimentation (applies to hdo ice) 3040 co2condens_mod.F: implementation of the transport of the isotopic ratio in the Van Leer scheme used for condensation of CO2 (applies to hdo ice and vapour) -
trunk/LMDZ.MARS/libf/dynphy_lonlat/phymars/iniphysiq_mod.F90
r1682 r2322 11 11 12 12 use infotrac, only : nqtot, & ! number of advected tracers 13 tname ! tracer names 13 tname, & ! tracer names 14 nqdesc,iqfils,nqperes,nqfils! MVals: variables isotopes 14 15 use comgeomfi_h, only: ini_fillgeom 15 16 use temps_mod, only: day_ini, hour_ini … … 71 72 call phys_state_var_init(klon_omp,nlayer,nqtot,tname, & 72 73 day_ini,hour_ini,punjours,ptimestep, & 73 prad,pg,pr,pcpp) 74 prad,pg,pr,pcpp, & 75 nqdesc,iqfils,nqperes,nqfils) ! MVals: variables isotopes 74 76 call ini_fillgeom(klon_omp,latitude,longitude,cell_area) 75 77 ! work is needed to put what is in comgeomfi_h in geometry_mod? -
trunk/LMDZ.MARS/libf/phymars/callsedim_mod.F
r2312 r2322 22 22 & igcm_co2_ice, igcm_stormdust_mass, 23 23 & igcm_stormdust_number,igcm_topdust_mass, 24 & igcm_topdust_number 24 & igcm_topdust_number, 25 & iqfils,nqfils,qperemin,masseqmin ! MVals: variables isotopes 25 26 USE newsedim_mod, ONLY: newsedim 26 27 USE comcstfi_h, ONLY: g … … 91 92 real masse (ngrid,nlay) ! Layer mass (kg.m-2) 92 93 real epaisseur (ngrid,nlay) ! Layer thickness (m) 93 real wq(ngrid,nlay+1) ! displaced tracer mass(kg.m-2)94 real wq(ngrid,nlay+1),w(ngrid,nlay) ! displaced tracer mass wq (kg.m-2), MVals: displaced "pere" tracer mass w (kg.m-2) 94 95 real r0(ngrid,nlay) ! geometric mean radius used for 95 96 ! sedimentation (m) … … 105 106 REAl ccntyp 106 107 character(len=20),parameter :: modname="callsedim" 108 c MVals: transport of the isotopic ratio 109 REAL Ratio0(ngrid,nlay),Ratio(ngrid,nlay) 110 REAL masseq(ngrid,nlay) 111 REAL newmasse 112 REAL zq0(ngrid,nlay,nq) 113 INTEGER ifils,iq2 107 114 108 115 … … 388 395 if(radius(iq).gt.1.e-9 .and.(iq.ne.ico2_ice) .and. 389 396 & (iq .ne. iccnco2_mass) .and. (iq .ne. 390 & iccnco2_number) ) then! no sedim for gaz or CO2 clouds (done in microtimestep)391 397 & iccnco2_number) .and. ! no sedim for gaz or CO2 clouds (done in microtimestep) 398 & iq .ne. igcm_hdo_ice) then !MVals: hdo is transported by h2o 392 399 c ----------------------------------------------------------------- 393 400 c DOUBLEQ CASE … … 500 507 c ----------------------------------------------------------------- 501 508 else if ((iq .eq. iccn_mass) .or. (iq .eq. iccn_number) 502 & .or. (iq .eq. igcm_h2o_ice) 503 & .or. (iq .eq. igcm_hdo_ice)) then 509 & .or. (iq .eq. igcm_h2o_ice)) then 504 510 if (microphys) then 505 ! water ice sedimentation 511 c water ice sedimentation 512 c ~~~~~~~~~~ 506 513 call newsedim(ngrid,nlay,ngrid*nlay,ngrid*nlay, 507 514 & ptimestep,pplev,masse,epaisseur,zt,rsedcloud,rhocloud, 508 515 & zqi(1,1,iq),wq,beta) 516 c Surface Tendencies 517 c ~~~~~~~~~~ 518 do ig=1,ngrid 519 pdqs_sed(ig,iq)=wq(ig,1)/ptimestep 520 end do 509 521 else 510 ! water ice sedimentation 522 c water ice sedimentation 523 c ~~~~~~~~~~ 511 524 call newsedim(ngrid,nlay,ngrid*nlay,1, 512 525 & ptimestep,pplev,masse,epaisseur,zt,rsedcloud,rho_q(iq), 513 526 & zqi(1,1,iq),wq,beta) 527 c Surface tendencies 528 c ~~~~~~~~~~ 529 do ig=1,ngrid 530 pdqs_sed(ig,iq)=wq(ig,1)/ptimestep 531 end do 532 c Special case of isotopes 533 c ~~~~~~~~~~ 534 !MVals: Loop over the sons ("fils") 535 if (nqfils(iq).gt.0) then 536 iq2=iqfils(nqfils(iq),iq) ! for now always nqfils(iq)=1 (special case of HDO only son of H2O) 537 !MVals: input paramters in vlz_fi for hdo 538 do l=1,nlay 539 do ig=1,ngrid 540 if (zq0(ig,l,iq).gt.qperemin) then 541 Ratio0(ig,l)=zq0(ig,l,iq2)/zq0(ig,l,iq) 542 else 543 Ratio0(ig,l)=0. 544 endif 545 Ratio(ig,l)=Ratio0(ig,l) 546 masseq(ig,l)=max(masse(ig,l)*zq0(ig,l,iq),masseqmin) 547 w(ig,l)=wq(ig,l) !MVals: very important: hdo is transported by h2o (see vlsplt_p.F: correction bugg 15 mai 2015) 548 enddo !ig=1,ngrid 549 enddo !l=1,nlay 550 !MVals: no need to enter newsedim as the transporting mass w has been already calculated 551 call vlz_fi(ngrid,nlay,Ratio,2.,masseq,w,wq) 552 zqi(:,nlay,iq2)=zqi(:,nlay,iq)*Ratio0(:,nlay) 553 do l=1,nlay-1 554 do ig=1,ngrid 555 newmasse=max(masseq(ig,l)+w(ig,l+1)-w(ig,l),masseqmin) 556 Ratio(ig,l)=(Ratio0(ig,l)*masseq(ig,l) 557 & +wq(ig,l+1)-wq(ig,l))/newmasse 558 zqi(ig,l,iq2)=zqi(ig,l,iq)*Ratio(ig,l) 559 enddo 560 enddo !l=1,nlay-1 561 !MVals: hdo surface tendency 562 do ig=1,ngrid 563 if (w(ig,1).gt.masseqmin) then 564 pdqs_sed(ig,iq2)=pdqs_sed(ig,iq)*(wq(ig,1)/w(ig,1)) 565 else 566 pdqs_sed(ig,iq2)=pdqs_sed(ig,iq)*Ratio0(ig,1) 567 endif 568 end do 569 endif !(nqfils(iq).gt.0) 514 570 endif ! of if (microphys) 515 c Tendencies 516 c ~~~~~~~~~~ 517 do ig=1,ngrid 518 pdqs_sed(ig,iq)=wq(ig,1)/ptimestep 519 end do 571 520 572 c ----------------------------------------------------------------- 521 573 c GENERAL CASE … … 539 591 pdqsed(ig,l,iq)=(zqi(ig,l,iq)- 540 592 $ (pq(ig,l,iq) + pdqfi(ig,l,iq)*ptimestep))/ptimestep 593 !MVals: Special case of isotopes: for now only HDO 594 if (nqfils(iq).gt.0) then 595 iq2=iqfils(nqfils(iq),iq) 596 pdqsed(ig,l,iq2)=(zqi(ig,l,iq2)- 597 $ (pq(ig,l,iq2) + pdqfi(ig,l,iq2)*ptimestep))/ptimestep 598 endif 541 599 ENDDO 542 600 ENDDO -
trunk/LMDZ.MARS/libf/phymars/co2condens_mod.F
r2189 r2322 18 18 use tracer_mod, only: noms, igcm_h2o_ice, 19 19 & igcm_dust_mass, igcm_dust_number, 20 & igcm_ccn_mass, igcm_ccn_number 20 & igcm_ccn_mass, igcm_ccn_number, 21 & iqfils,nqperes,nqfils, ! MVals: variables isotopes 22 & qperemin,masseqmin 21 23 use surfdat_h, only: emissiv, phisfi 22 24 use geometry_mod, only: latitude, ! grid point latitudes (rad) … … 155 157 REAL ztm3D(ngrid,nlayer) 156 158 REAL zmflux3D(ngrid,nlayer) 159 160 c MVals: variables isotopes 161 REAL Ratio1(nlayer),Ratiom1(nlayer+1) 162 REAL masseq(nlayer),wq(nlayer+1) 163 INTEGER ifils,iq2 157 164 c---------------------------------------------------------------------- 158 165 … … 537 544 call vl1d(nlayer,zu ,2.,masse,w,zum) 538 545 call vl1d(nlayer,zv ,2.,masse,w,zvm) 539 do iq=1,nq 546 ! MVals: loop over the fathers ("peres") 547 do iq=1,nqperes 540 548 do l=1,nlayer 541 549 zq1(l)=zqc(l,iq) … … 547 555 zqm(l,iq)=zqm1(l) 548 556 enddo 549 enddo 557 ! MVals: loop over the sons ("fils") 558 if (nqfils(iq).gt.0) then 559 iq2=iqfils(nqfils(iq),iq) ! for now it is always nqfils(iq)=1 (special case of HDO only son of H2O) 560 do l=1,nlayer 561 if (zqc(l,iq).gt.qperemin) then 562 Ratio1(l)=zqc(l,iq2)/zqc(l,iq) 563 else 564 Ratio1(l)=0. 565 endif 566 masseq(l)=max(masse(l)*zqc(l,iq),masseqmin) 567 wq(l)=w(l)*zqm(l,iq) 568 enddo 569 Ratiom1(1)=zqm(1,iq2) 570 call vl1d(nlayer,Ratio1,2.,masseq,wq,Ratiom1) 571 zqm(1,iq2)=Ratiom1(1)*zqc(1,iq) 572 do l=2,nlayer 573 zqm(l,iq2)=Ratiom1(l)*zqm(l,iq) 574 enddo 575 endif !if (nqfils(iq).gt.0) then 576 enddo !iq=1,nqperes 550 577 551 578 c Surface condensation affects low winds -
trunk/LMDZ.MARS/libf/phymars/dyn1d/testphys1d.F
r2312 r2322 5 5 use dimphy, only : init_dimphy 6 6 use mod_grid_phy_lmdz, only : regular_lonlat 7 use infotrac, only: nqtot, tname 7 use infotrac, only: nqtot, tname, nqperes,nqdesc,iqfils,nqfils, 8 & iqpere, nqdesc_tot 8 9 use comsoil_h, only: volcapa, layer, mlayer, inertiedat, nsoilmx 9 10 use comgeomfi_h, only: sinlat, ini_fillgeom … … 127 128 REAL halfaxe, excentric, Lsperi 128 129 Logical paleomars 130 131 c MVals: isotopes as in the dynamics (CRisi) 132 INTEGER :: ifils,ipere,generation 133 CHARACTER(len=30), ALLOCATABLE, DIMENSION(:) :: tnom_transp ! transporting fluid short name 134 CHARACTER(len=80) :: line ! to store a line of text 135 INTEGER ierr0 136 LOGICAL :: continu 129 137 130 138 c======================================================================= … … 240 248 allocate(dqdyn(nlayer,nq)) 241 249 allocate(mqtot(nq)) 250 allocate(tnom_transp(nq)) 242 251 243 252 ! read tracer names from file traceur.def 244 253 do iq=1,nq 245 read(90, *,iostat=ierr) tname(iq)254 read(90,'(80a)',iostat=ierr) line ! store the line from traceur.def 246 255 if (ierr.ne.0) then 247 256 write(*,*) 'testphys1d: error reading tracer names...' 248 257 stop 249 258 endif 259 ! if format is tnom_0, tnom_transp (isotopes) 260 read(line,*,iostat=ierr0) tname(iq),tnom_transp(iq) 261 if (ierr0.ne.0) then 262 read(line,*) tname(iq) 263 tnom_transp(iq)='air' 264 endif 265 250 266 enddo 251 267 close(90) 268 269 ! Isotopes: as in the 3D case we have to determine father/son relations for isotopes and carrying fluid 270 ALLOCATE(nqfils(nqtot),nqdesc(nqtot)) 271 ALLOCATE(iqfils(nqtot,nqtot)) 272 ALLOCATE(iqpere(nqtot)) 273 nqperes=0 274 nqfils(:)=0 275 nqdesc(:)=0 276 iqfils(:,:)=0 277 iqpere(:)=0 278 nqdesc_tot=0 279 DO iq=1,nqtot 280 if (tnom_transp(iq) == 'air') then 281 ! ceci est un traceur père 282 WRITE(*,*) 'Le traceur',iq,', appele ', 283 & trim(tname(iq)),', est un pere' 284 nqperes=nqperes+1 285 iqpere(iq)=0 286 else !if (tnom_transp(iq) == 'air') then 287 ! ceci est un fils. Qui est son père? 288 WRITE(*,*) 'Le traceur',iq,', appele ', 289 & trim(tname(iq)),', est un fils' 290 continu=.true. 291 ipere=1 292 do while (continu) 293 if (tnom_transp(iq) .eq. tname(ipere)) then 294 ! Son père est ipere 295 WRITE(*,*) 'Le traceur',iq,'appele ', 296 & trim(tname(iq)),' est le fils de ', 297 & ipere,'appele ',trim(tname(ipere)) 298 nqfils(ipere)=nqfils(ipere)+1 299 iqfils(nqfils(ipere),ipere)=iq 300 iqpere(iq)=ipere 301 continu=.false. 302 else !if (tnom_transp(iq) == tnom_0(ipere)) then 303 ipere=ipere+1 304 if (ipere.gt.nqtot) then 305 WRITE(*,*) 'Le traceur',iq,'appele ', 306 & trim(tname(iq)),', est orpelin.' 307 CALL abort_gcm('infotrac_init', 308 & 'Un traceur est orphelin',1) 309 endif !if (ipere.gt.nqtot) then 310 endif !if (tnom_transp(iq) == tnom_0(ipere)) then 311 enddo !do while (continu) 312 endif !if (tnom_transp(iq) == 'air') then 313 enddo !DO iq=1,nqtot 314 WRITE(*,*) 'nqperes=',nqperes 315 WRITE(*,*) 'nqfils=',nqfils 316 WRITE(*,*) 'iqpere=',iqpere 317 WRITE(*,*) 'iqfils=',iqfils 318 ! Calculer le nombre de descendants à partir de iqfils et de nbfils 319 DO iq=1,nqtot 320 generation=0 321 continu=.true. 322 ifils=iq 323 do while (continu) 324 ipere=iqpere(ifils) 325 if (ipere.gt.0) then 326 nqdesc(ipere)=nqdesc(ipere)+1 327 nqdesc_tot=nqdesc_tot+1 328 iqfils(nqdesc(ipere),ipere)=iq 329 ifils=ipere 330 generation=generation+1 331 else !if (ipere.gt.0) then 332 continu=.false. 333 endif !if (ipere.gt.0) then 334 enddo !do while (continu) 335 WRITE(*,*) 'Le traceur ',iq,', appele ',trim(tname(iq)), 336 & ' est un traceur de generation: ',generation 337 ENDDO !DO iq=1,nqtot 338 WRITE(*,*) 'infotrac: nqdesc=',nqdesc 339 WRITE(*,*) 'iqfils=',iqfils 340 WRITE(*,*) 'nqdesc_tot=',nqdesc_tot 252 341 253 342 ! initialize tracers here: … … 583 672 call init_dimphy(1,nlayer) ! Initialize dimphy module 584 673 call phys_state_var_init(1,llm,nq,tname, 585 . day0,time,daysec,dtphys,rad,g,r,cpp) 674 . day0,time,daysec,dtphys,rad,g,r,cpp, 675 . nqdesc,iqfils,nqperes,nqfils)! MVals: variables isotopes 586 676 call ini_fillgeom(1,latitude,longitude,(/1.0/)) 587 677 call conf_phys(1,llm,nq) -
trunk/LMDZ.MARS/libf/phymars/phys_state_var_init_mod.F90
r2265 r2322 5 5 SUBROUTINE phys_state_var_init(ngrid,nlayer,nq,tname, & 6 6 day_ini,hour_ini,pdaysec,ptimestep, & 7 prad,pg,pr,pcpp) 7 prad,pg,pr,pcpp, & 8 dyn_nqdesc,dyn_iqfils,dyn_nqperes,dyn_nqfils)! MVals: variables isotopes 8 9 9 10 !======================================================================= … … 67 68 REAL,INTENT(IN) :: hour_ini 68 69 REAL,INTENT(IN) :: pdaysec,ptimestep,prad,pg,pr,pcpp 70 !MVals isotopes 71 INTEGER,INTENT(in) :: dyn_nqperes 72 INTEGER,INTENT(in) :: dyn_nqfils(nq) 73 INTEGER,INTENT(in) :: dyn_nqdesc(nq) 74 INTEGER,INTENT(in) :: dyn_iqfils(nq,nq) 69 75 70 76 ! set dimension and allocate arrays in tracer_mod 71 77 call end_tracer_mod 72 call ini_tracer_mod(nq,tname )78 call ini_tracer_mod(nq,tname,dyn_nqdesc,dyn_iqfils,dyn_nqperes,dyn_nqfils)! MVals: variables isotopes 73 79 74 80 -
trunk/LMDZ.MARS/libf/phymars/tracer_mod.F90
r2321 r2322 95 95 ! other tracers 96 96 integer,save :: igcm_ar_n2 ! for simulations using co2 +neutral gas 97 97 ! MVals: isotopes 98 integer, save :: nqperes ! numbers of tracers defined as "peres" 99 integer, allocatable, save :: nqfils(:) ! numbers of sons ("fils") of the considered tracer 100 integer, allocatable, save :: iqfils(:,:) ! indice of a son, ex: iqfils(nqfils(ipere),ipere) 101 real, parameter :: qperemin=1.e-16 ! threschold for the "pere" mixing ratio qpere to calculate Ratio=qfils/qpere 102 real, parameter :: masseqmin=1.e-16 ! threschold for the "pere" transporting masse 103 !integer, allocatable, save :: nqdesc(:) ! number of sons + all gran-sons over all generations: not useful for now in the martian case as there are no gran-sons 98 104 99 105 !----------------------------------------------------------------------- … … 101 107 contains 102 108 103 subroutine ini_tracer_mod(nq,tname )109 subroutine ini_tracer_mod(nq,tname,dyn_nqdesc,dyn_iqfils,dyn_nqperes,dyn_nqfils)! MVals: variables isotopes 104 110 implicit none 105 111 106 112 integer,intent(in) :: nq ! number of tracers 107 113 character(len=*),intent(in) :: tname(nq) ! tracer names 114 !MVals: variables isotopes 115 integer,intent(in) :: dyn_nqperes 116 integer,intent(in) :: dyn_nqfils(nq) 117 integer,intent(in) :: dyn_nqdesc(nq) 118 integer,intent(in) :: dyn_iqfils(nq,nq) 108 119 109 120 integer :: iq, count … … 117 128 write(*,*) "tracer_mod names : ", trim(noms(iq)) 118 129 enddo 130 131 !MVals: isotopes variables initialisation 132 do iq=1,nq 133 if (dyn_nqfils(iq).ne.dyn_nqdesc(iq)) then 134 write(*,*) ' for now all descendants must be sons: check the', & 135 ' relations between tracers in traceur.def !' 136 call abort_physic("ini_tracer_mod","relatives pattern between tracers not accepted",1) 137 endif 138 enddo 139 allocate(nqfils(nq))!,nqdesc(nq)) 140 allocate(iqfils(nq,nq)) 141 nqperes=dyn_nqperes 142 nqfils(:)=dyn_nqfils(:) 143 iqfils(:,:)=dyn_iqfils(:,:) 119 144 120 145 #ifndef MESOSCALE
Note: See TracChangeset
for help on using the changeset viewer.
