source: trunk/libf/dyn3dpar/infotrac.F90 @ 1

Last change on this file since 1 was 1, checked in by emillour, 14 years ago

Import initial LMDZ5

File size: 11.1 KB
Line 
1! $Id$
2!
3MODULE infotrac
4
5! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
6  INTEGER, SAVE :: nqtot
7
8! nbtr : number of tracers not including higher order of moment or water vapor or liquid
9!        number of tracers used in the physics
10  INTEGER, SAVE :: nbtr
11
12! Name variables
13  CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
14  CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
15
16! iadv  : index of trasport schema for each tracer
17  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE    :: iadv
18
19! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
20!         dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
21  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE    :: niadv ! equivalent dyn / physique
22
23! conv_flg(it)=0 : convection desactivated for tracer number it
24  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE  :: conv_flg
25! pbl_flg(it)=0  : boundary layer diffusion desactivaded for tracer number it
26  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE  :: pbl_flg
27
28  CHARACTER(len=4),SAVE :: type_trac
29 
30CONTAINS
31
32  SUBROUTINE infotrac_init
33    USE control_mod
34    IMPLICIT NONE
35!=======================================================================
36!
37!   Auteur:  P. Le Van /L. Fairhead/F.Hourdin
38!   -------
39!   Modif special traceur F.Forget 05/94
40!   Modif M-A Filiberti 02/02 lecture de traceur.def
41!
42!   Objet:
43!   ------
44!   GCM LMD nouvelle grille
45!
46!=======================================================================
47!   ... modification de l'integration de q ( 26/04/94 ) ....
48!-----------------------------------------------------------------------
49! Declarations
50
51    INCLUDE "dimensions.h"
52    INCLUDE "iniprint.h"
53
54! Local variables
55    INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv  ! index of horizontal trasport schema
56    INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv  ! index of vertical trasport schema
57
58    CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0  ! tracer short name
59    CHARACTER(len=8), ALLOCATABLE, DIMENSION(:) :: tracnam ! name from INCA
60    CHARACTER(len=3), DIMENSION(30) :: descrq
61    CHARACTER(len=1), DIMENSION(3)  :: txts
62    CHARACTER(len=2), DIMENSION(9)  :: txtp
63    CHARACTER(len=13)               :: str1,str2
64 
65    INTEGER :: nqtrue  ! number of tracers read from tracer.def, without higer order of moment
66    INTEGER :: iq, new_iq, iiq, jq, ierr
67    INTEGER, EXTERNAL :: lnblnk
68 
69!-----------------------------------------------------------------------
70! Initialization :
71!
72    txts=(/'x','y','z'/)
73    txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
74
75    descrq(14)='VLH'
76    descrq(10)='VL1'
77    descrq(11)='VLP'
78    descrq(12)='FH1'
79    descrq(13)='FH2'
80    descrq(16)='PPM'
81    descrq(17)='PPS'
82    descrq(18)='PPP'
83    descrq(20)='SLP'
84    descrq(30)='PRA'
85   
86
87    IF (config_inca=='none') THEN
88       type_trac='lmdz'
89    ELSE
90       type_trac='inca'
91    END IF
92
93!-----------------------------------------------------------------------
94!
95! 1) Get the true number of tracers + water vapor/liquid
96!    Here true tracers (nqtrue) means declared tracers (only first order)
97!
98!-----------------------------------------------------------------------
99    IF (type_trac == 'lmdz') THEN
100       OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
101       IF(ierr.EQ.0) THEN
102          WRITE(lunout,*) 'Open traceur.def : ok'
103          READ(90,*) nqtrue
104       ELSE
105          WRITE(lunout,*) 'Problem in opening traceur.def'
106          WRITE(lunout,*) 'ATTENTION using defaut values'
107          nqtrue=4 ! Defaut value
108       END IF
109       ! Attention! Only for planet_type=='earth'
110       nbtr=nqtrue-2
111    ELSE
112       ! nbtr has been read from INCA by init_cont_lmdz() in gcm.F
113       nqtrue=nbtr+2
114    END IF
115
116    IF (nqtrue < 2) THEN
117       WRITE(lunout,*) 'nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
118       CALL abort_gcm('infotrac_init','Not enough tracers',1)
119    END IF
120!
121! Allocate variables depending on nqtrue and nbtr
122!
123    ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue))
124    ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), tracnam(nbtr))
125    conv_flg(:) = 1 ! convection activated for all tracers
126    pbl_flg(:)  = 1 ! boundary layer activated for all tracers
127
128!-----------------------------------------------------------------------
129! 2)     Choix  des schemas d'advection pour l'eau et les traceurs
130!
131!     iadv = 1    schema  transport type "humidite specifique LMD"
132!     iadv = 2    schema   amont
133!     iadv = 14   schema  Van-leer + humidite specifique
134!                            Modif F.Codron
135!     iadv = 10   schema  Van-leer (retenu pour l'eau vapeur et liquide)
136!     iadv = 11   schema  Van-Leer pour hadv et version PPM (Monotone) pour vadv
137!     iadv = 12   schema  Frederic Hourdin I
138!     iadv = 13   schema  Frederic Hourdin II
139!     iadv = 16   schema  PPM Monotone(Collela & Woodward 1984)
140!     iadv = 17   schema  PPM Semi Monotone (overshoots autorisés)
141!     iadv = 18   schema  PPM Positif Defini (overshoots undershoots autorisés)
142!     iadv = 20   schema  Slopes
143!     iadv = 30   schema  Prather
144!
145!        Dans le tableau q(ij,l,iq) : iq = 1  pour l'eau vapeur
146!                                     iq = 2  pour l'eau liquide
147!       Et eventuellement             iq = 3,nqtot pour les autres traceurs
148!
149!        iadv(1): choix pour l'eau vap. et  iadv(2) : choix pour l'eau liq.
150!------------------------------------------------------------------------
151!
152!    Get choice of advection schema from file tracer.def or from INCA
153!---------------------------------------------------------------------
154    IF (type_trac == 'lmdz') THEN
155       IF(ierr.EQ.0) THEN
156          ! Continue to read tracer.def
157          DO iq=1,nqtrue
158             READ(90,999) hadv(iq),vadv(iq),tnom_0(iq)
159          END DO
160          CLOSE(90) 
161       ELSE ! Without tracer.def
162          hadv(1) = 14
163          vadv(1) = 14
164          tnom_0(1) = 'H2Ov'
165          hadv(2) = 10
166          vadv(2) = 10
167          tnom_0(2) = 'H2Ol'
168          hadv(3) = 10
169          vadv(3) = 10
170          tnom_0(3) = 'RN'
171          hadv(4) = 10
172          vadv(4) = 10
173          tnom_0(4) = 'PB'
174       END IF
175       
176       WRITE(lunout,*) 'Valeur de traceur.def :'
177       WRITE(lunout,*) 'nombre de traceurs ',nqtrue
178       DO iq=1,nqtrue
179          WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq)
180       END DO
181
182    ELSE  ! type_trac=inca : config_inca='aero' ou 'chem'
183! le module de chimie fournit les noms des traceurs
184! et les schemas d'advection associes.
185     
186#ifdef INCA
187       CALL init_transport( &
188            hadv, &
189            vadv, &
190            conv_flg, &
191            pbl_flg,  &
192            tracnam)
193#endif
194       tnom_0(1)='H2Ov'
195       tnom_0(2)='H2Ol'
196
197       DO iq =3,nqtrue
198          tnom_0(iq)=tracnam(iq-2)
199       END DO
200
201    END IF ! type_trac
202
203!-----------------------------------------------------------------------
204!
205! 3) Verify if advection schema 20 or 30 choosen
206!    Calculate total number of tracers needed: nqtot
207!    Allocate variables depending on total number of tracers
208!-----------------------------------------------------------------------
209    new_iq=0
210    DO iq=1,nqtrue
211       ! Add tracers for certain advection schema
212       IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
213          new_iq=new_iq+1  ! no tracers added
214       ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
215          new_iq=new_iq+4  ! 3 tracers added
216       ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
217          new_iq=new_iq+10 ! 9 tracers added
218       ELSE
219          WRITE(lunout,*) 'This choice of advection schema is not available'
220          CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
221       END IF
222    END DO
223   
224    IF (new_iq /= nqtrue) THEN
225       ! The choice of advection schema imposes more tracers
226       ! Assigne total number of tracers
227       nqtot = new_iq
228
229       WRITE(lunout,*) 'The choice of advection schema for one or more tracers'
230       WRITE(lunout,*) 'makes it necessary to add tracers'
231       WRITE(lunout,*) nqtrue,' is the number of true tracers'
232       WRITE(lunout,*) nqtot, ' is the total number of tracers needed'
233
234    ELSE
235       ! The true number of tracers is also the total number
236       nqtot = nqtrue
237    END IF
238
239!
240! Allocate variables with total number of tracers, nqtot
241!
242    ALLOCATE(tname(nqtot), ttext(nqtot))
243    ALLOCATE(iadv(nqtot), niadv(nqtot))
244
245!-----------------------------------------------------------------------
246!
247! 4) Determine iadv, long and short name
248!
249!-----------------------------------------------------------------------
250    new_iq=0
251    DO iq=1,nqtrue
252       new_iq=new_iq+1
253
254       ! Verify choice of advection schema
255       IF (hadv(iq)==vadv(iq)) THEN
256          iadv(new_iq)=hadv(iq)
257       ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
258          iadv(new_iq)=11
259       ELSE
260          WRITE(lunout,*)'This choice of advection schema is not available'
261          CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
262       END IF
263     
264       str1=tnom_0(iq)
265       tname(new_iq)= tnom_0(iq)
266       IF (iadv(new_iq)==0) THEN
267          ttext(new_iq)=str1(1:lnblnk(str1))
268       ELSE
269          ttext(new_iq)=str1(1:lnblnk(str1))//descrq(iadv(new_iq))
270       END IF
271
272       ! schemas tenant compte des moments d'ordre superieur
273       str2=ttext(new_iq)
274       IF (iadv(new_iq)==20) THEN
275          DO jq=1,3
276             new_iq=new_iq+1
277             iadv(new_iq)=-20
278             ttext(new_iq)=str2(1:lnblnk(str2))//txts(jq)
279             tname(new_iq)=str1(1:lnblnk(str1))//txts(jq)
280          END DO
281       ELSE IF (iadv(new_iq)==30) THEN
282          DO jq=1,9
283             new_iq=new_iq+1
284             iadv(new_iq)=-30
285             ttext(new_iq)=str2(1:lnblnk(str2))//txtp(jq)
286             tname(new_iq)=str1(1:lnblnk(str1))//txtp(jq)
287          END DO
288       END IF
289    END DO
290
291!
292! Find vector keeping the correspodence between true and total tracers
293!
294    niadv(:)=0
295    iiq=0
296    DO iq=1,nqtot
297       IF(iadv(iq).GE.0) THEN
298          ! True tracer
299          iiq=iiq+1
300          niadv(iiq)=iq
301       ENDIF
302    END DO
303
304
305    WRITE(lunout,*) 'Information stored in infotrac :'
306    WRITE(lunout,*) 'iadv  niadv tname  ttext :'
307    DO iq=1,nqtot
308       WRITE(lunout,*) iadv(iq),niadv(iq), tname(iq), ttext(iq)
309    END DO
310
311!
312! Test for advection schema.
313! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
314!
315    DO iq=1,nqtot
316       IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
317          WRITE(lunout,*)'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
318          CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
319       ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
320          WRITE(lunout,*)'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
321          CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
322       END IF
323    END DO
324
325!-----------------------------------------------------------------------
326! Finalize :
327!
328    DEALLOCATE(tnom_0, hadv, vadv)
329    DEALLOCATE(tracnam)
330
331999 FORMAT (i2,1x,i2,1x,a15)
332
333  END SUBROUTINE infotrac_init
334
335END MODULE infotrac
Note: See TracBrowser for help on using the repository browser.