Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

module_tiles.F @ 3547

Last change on this file since 3547 was 11, checked in by aslmd, 14 years ago
spiga@svn-planeto:ajoute le modele meso-echelle martien
File size: 16.1 KB

Line
1	!WRF:DRIVER_LAYER:TILING
2	!
3
4	MODULE module_tiles
5
6	USE module_configure
7
8	INTERFACE set_tiles
9	MODULE PROCEDURE set_tiles1 , set_tiles2, set_tiles3
10	END INTERFACE
11
12	CONTAINS
13
14	! CPP macro for error checking
15	#define ERROR_TEST(A,O,B) IF( A O B )THEN;WRITE(mess,'(3A4)')'A','O','B';CALL WRF_ERROR_FATAL(mess);ENDIF
16
17	! this version is used to compute only on a boundary of some width
18	! The ids, ide, jds, and jde arguments specify the edge of the boundary (a way of
19	! accounting for staggering, and the bdyw gives the number of cells
20	! (idea: if bdyw is negative, have it do the reverse and specify the
21	! interior, less the boundary.
22
23	SUBROUTINE set_tiles1 ( grid , ids , ide , jds , jde , bdyw )
24
25	USE module_domain
26	USE module_driver_constants
27	USE module_machine
28	USE module_wrf_error
29
30	IMPLICIT NONE
31
32	! Input data.
33
34	TYPE(domain) , INTENT(INOUT) :: grid
35	INTEGER , INTENT(IN) :: ids , ide , jds , jde , bdyw
36
37	! Local data
38
39	INTEGER :: spx, epx, spy, epy, t, tt, ts, te
40	INTEGER :: smx, emx, smy, emy
41	INTEGER :: ntiles , num_tiles
42
43	CHARACTER*80 :: mess
44
45	data_ordering : SELECT CASE ( model_data_order )
46	CASE ( DATA_ORDER_XYZ )
47	spx = grid%sp31 ; epx = grid%ep31 ; spy = grid%sp32 ; epy = grid%ep32
48	CASE ( DATA_ORDER_YXZ )
49	spx = grid%sp32 ; epx = grid%ep32 ; spy = grid%sp31 ; epy = grid%ep31
50	CASE ( DATA_ORDER_ZXY )
51	spx = grid%sp32 ; epx = grid%ep32 ; spy = grid%sp33 ; epy = grid%ep33
52	CASE ( DATA_ORDER_ZYX )
53	spx = grid%sp33 ; epx = grid%ep33 ; spy = grid%sp32 ; epy = grid%ep32
54	CASE ( DATA_ORDER_XZY )
55	spx = grid%sp31 ; epx = grid%ep31 ; spy = grid%sp33 ; epy = grid%ep33
56	CASE ( DATA_ORDER_YZX )
57	spx = grid%sp33 ; epx = grid%ep33 ; spy = grid%sp31 ; epy = grid%ep31
58	END SELECT data_ordering
59
60	num_tiles = 4
61
62	IF ( num_tiles > grid%max_tiles ) THEN
63	IF ( ASSOCIATED(grid%i_start) ) THEN ; DEALLOCATE( grid%i_start ) ; NULLIFY( grid%i_start ) ; ENDIF
64	IF ( ASSOCIATED(grid%i_end) ) THEN ; DEALLOCATE( grid%i_end ) ; NULLIFY( grid%i_end ) ; ENDIF
65	IF ( ASSOCIATED(grid%j_start) ) THEN ; DEALLOCATE( grid%j_start ) ; NULLIFY( grid%j_start ) ; ENDIF
66	IF ( ASSOCIATED(grid%j_end) ) THEN ; DEALLOCATE( grid%j_end ) ; NULLIFY( grid%j_end ) ; ENDIF
67	ALLOCATE(grid%i_start(num_tiles))
68	ALLOCATE(grid%i_end(num_tiles))
69	ALLOCATE(grid%j_start(num_tiles))
70	ALLOCATE(grid%j_end(num_tiles))
71	grid%max_tiles = num_tiles
72	ENDIF
73
74	! XS boundary
75	IF ( ids .ge. spx .and. ids .le. epx ) THEN
76	grid%i_start(1) = ids
77	grid%i_end(1) = min( ids+bdyw-1 , epx )
78	grid%j_start(1) = max( spy , jds )
79	grid%j_end(1) = min( epy , jde )
80	ELSEIF ( (ids+bdyw-1) .ge. spx .and. (ids+bdyw-1) .le. epx ) THEN
81	grid%i_start(1) = max( ids , spx )
82	grid%i_end(1) = ids+bdyw-1
83	grid%j_start(1) = max( spy , jds )
84	grid%j_end(1) = min( epy , jde )
85	ELSE
86	grid%i_start(1) = 1
87	grid%i_end(1) = -1
88	grid%j_start(1) = 1
89	grid%j_end(1) = -1
90	ENDIF
91
92	! XE boundary
93	IF ( ide .ge. spx .and. ide .le. epx ) THEN
94	grid%i_start(2) = max( ide-bdyw+1 , spx )
95	grid%i_end(2) = ide
96	grid%j_start(2) = max( spy , jds )
97	grid%j_end(2) = min( epy , jde )
98	ELSEIF ( (ide-bdyw+1) .ge. spx .and. (ide-bdyw+1) .le. epx ) THEN
99	grid%i_start(2) = ide-bdyw+1
100	grid%i_end(2) = min( ide , epx )
101	grid%j_start(2) = max( spy , jds )
102	grid%j_end(2) = min( epy , jde )
103	ELSE
104	grid%i_start(2) = 1
105	grid%i_end(2) = -1
106	grid%j_start(2) = 1
107	grid%j_end(2) = -1
108	ENDIF
109
110	! YS boundary (note that the corners may already be done by XS and XE)
111	IF ( jds .ge. spy .and. jds .le. epy ) THEN
112	grid%j_start(3) = jds
113	grid%j_end(3) = min( jds+bdyw-1 , epy )
114	grid%i_start(3) = max( spx , ids+bdyw )
115	grid%i_end(3) = min( epx , ide-bdyw )
116	ELSEIF ( (jds+bdyw-1) .ge. spy .and. (jds+bdyw-1) .le. epy ) THEN
117	grid%j_start(3) = max( jds , spy )
118	grid%j_end(3) = jds+bdyw-1
119	grid%i_start(3) = max( spx , ids+bdyw )
120	grid%i_end(3) = min( epx , ide-bdyw )
121	ELSE
122	grid%j_start(3) = 1
123	grid%j_end(3) = -1
124	grid%i_start(3) = 1
125	grid%i_end(3) = -1
126	ENDIF
127
128	! YE boundary (note that the corners may already be done by XS and XE)
129	IF ( jde .ge. spy .and. jde .le. epy ) THEN
130	grid%j_start(4) = max( jde-bdyw+1 , spy )
131	grid%j_end(4) = jde
132	grid%i_start(4) = max( spx , ids+bdyw )
133	grid%i_end(4) = min( epx , ide-bdyw )
134	ELSEIF ( (jde-bdyw+1) .ge. spy .and. (jde-bdyw+1) .le. epy ) THEN
135	grid%j_start(4) = jde-bdyw+1
136	grid%j_end(4) = min( jde , epy )
137	grid%i_start(4) = max( spx , ids+bdyw )
138	grid%i_end(4) = min( epx , ide-bdyw )
139	ELSE
140	grid%j_start(4) = 1
141	grid%j_end(4) = -1
142	grid%i_start(4) = 1
143	grid%i_end(4) = -1
144	ENDIF
145
146	grid%num_tiles = num_tiles
147
148	RETURN
149	END SUBROUTINE set_tiles1
150
151	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
152	! this version is used to limit the domain or compute onto halos
153	SUBROUTINE set_tiles2 ( grid , ids , ide , jds , jde , ips , ipe , jps , jpe )
154	USE module_domain
155	USE module_driver_constants
156	USE module_machine
157	USE module_wrf_error
158
159	IMPLICIT NONE
160
161	! Input data.
162
163	TYPE(domain) , INTENT(INOUT) :: grid
164	INTEGER , INTENT(IN) :: ids , ide , jds , jde
165	INTEGER , INTENT(IN) :: ips , ipe , jps , jpe
166
167	! Output data.
168
169	! Local data.
170
171	INTEGER :: num_tiles_x, num_tiles_y, num_tiles
172	INTEGER :: tile_sz_x, tile_sz_y
173	INTEGER :: spx, epx, spy, epy, t, tt, ts, te
174	INTEGER :: smx, emx, smy, emy
175	INTEGER :: ntiles
176	INTEGER :: one
177	#ifdef _OPENMP
178	INTEGER , EXTERNAL :: omp_get_max_threads
179	#endif
180	CHARACTER*80 :: mess
181
182	data_ordering : SELECT CASE ( model_data_order )
183	CASE ( DATA_ORDER_XYZ )
184	spx = grid%sp31 ; epx = grid%ep31 ; spy = grid%sp32 ; epy = grid%ep32
185	smx = grid%sm31 ; emx = grid%em31 ; smy = grid%sm32 ; emy = grid%em32
186	CASE ( DATA_ORDER_YXZ )
187	spx = grid%sp32 ; epx = grid%ep32 ; spy = grid%sp31 ; epy = grid%ep31
188	smx = grid%sm32 ; emx = grid%em32 ; smy = grid%sm31 ; emy = grid%em31
189	CASE ( DATA_ORDER_ZXY )
190	spx = grid%sp32 ; epx = grid%ep32 ; spy = grid%sp33 ; epy = grid%ep33
191	smx = grid%sm32 ; emx = grid%em32 ; smy = grid%sm33 ; emy = grid%em33
192	CASE ( DATA_ORDER_ZYX )
193	spx = grid%sp33 ; epx = grid%ep33 ; spy = grid%sp32 ; epy = grid%ep32
194	smx = grid%sm33 ; emx = grid%em33 ; smy = grid%sm32 ; emy = grid%em32
195	CASE ( DATA_ORDER_XZY )
196	spx = grid%sp31 ; epx = grid%ep31 ; spy = grid%sp33 ; epy = grid%ep33
197	smx = grid%sm31 ; emx = grid%em31 ; smy = grid%sm33 ; emy = grid%em33
198	CASE ( DATA_ORDER_YZX )
199	spx = grid%sp33 ; epx = grid%ep33 ; spy = grid%sp31 ; epy = grid%ep31
200	smx = grid%sm33 ; emx = grid%em33 ; smy = grid%sm31 ; emy = grid%em31
201	END SELECT data_ordering
202
203	ERROR_TEST(ips,<,smx)
204	ERROR_TEST(ipe,>,emx)
205	ERROR_TEST(jps,<,smy)
206	ERROR_TEST(jpe,>,emy)
207
208	! Here's how the number of tiles is arrived at:
209	!
210	! if tile sizes are specified use those otherwise
211	! if num_tiles is specified use that otherwise
212	! if omp provides a value use that otherwise
213	! use 1.
214	!
215
216	IF ( grid%num_tiles_spec .EQ. 0 ) THEN
217	CALL nl_get_numtiles( 1, num_tiles )
218	IF ( num_tiles .EQ. 1 ) THEN
219	#ifdef _OPENMP
220	num_tiles = omp_get_max_threads()
221	WRITE(mess,'("WRF NUMBER OF TILES FROM OMP_GET_MAX_THREADS = ",I3)')num_tiles
222	CALL WRF_MESSAGE ( mess )
223	#else
224	num_tiles = 1
225	#endif
226	ENDIF
227	! override num_tiles setting (however gotten) if tile sizes are specified
228	CALL nl_get_tile_sz_x( 1, tile_sz_x )
229	CALL nl_get_tile_sz_y( 1, tile_sz_y )
230	IF ( tile_sz_x >= 1 .and. tile_sz_y >= 1 ) THEN
231	! figure number of whole tiles and add 1 for any partials in each dim
232	num_tiles_x = (epx-spx+1) / tile_sz_x
233	if ( tile_sz_x*num_tiles_x < epx-spx+1 ) num_tiles_x = num_tiles_x + 1
234	num_tiles_y = (epy-spy+1) / tile_sz_y
235	if ( tile_sz_y*num_tiles_y < epy-spy+1 ) num_tiles_y = num_tiles_y + 1
236	num_tiles = num_tiles_x * num_tiles_y
237	ELSE
238	IF ( machine_info%tile_strategy == TILE_X ) THEN
239	num_tiles_x = num_tiles
240	num_tiles_y = 1
241	ELSE IF ( machine_info%tile_strategy == TILE_Y ) THEN
242	num_tiles_x = 1
243	num_tiles_y = num_tiles
244	ELSE ! Default ( machine_info%tile_strategy == TILE_XY ) THEN
245	one = 1
246	call least_aspect( num_tiles, one, one, num_tiles_y, num_tiles_x )
247	ENDIF
248	ENDIF
249	grid%num_tiles_spec = num_tiles
250	grid%num_tiles_x = num_tiles_x
251	grid%num_tiles_y = num_tiles_y
252	WRITE(mess,'("WRF NUMBER OF TILES = ",I3)')num_tiles
253	CALL WRF_MESSAGE ( mess )
254	ENDIF
255
256	num_tiles = grid%num_tiles_spec
257	num_tiles_x = grid%num_tiles_x
258	num_tiles_y = grid%num_tiles_y
259
260	IF ( num_tiles > grid%max_tiles ) THEN
261	IF ( ASSOCIATED(grid%i_start) ) THEN ; DEALLOCATE( grid%i_start ) ; NULLIFY( grid%i_start ) ; ENDIF
262	IF ( ASSOCIATED(grid%i_end) ) THEN ; DEALLOCATE( grid%i_end ) ; NULLIFY( grid%i_end ) ; ENDIF
263	IF ( ASSOCIATED(grid%j_start) ) THEN ; DEALLOCATE( grid%j_start ) ; NULLIFY( grid%j_start ) ; ENDIF
264	IF ( ASSOCIATED(grid%j_end) ) THEN ; DEALLOCATE( grid%j_end ) ; NULLIFY( grid%j_end ) ; ENDIF
265	ALLOCATE(grid%i_start(num_tiles))
266	ALLOCATE(grid%i_end(num_tiles))
267	ALLOCATE(grid%j_start(num_tiles))
268	ALLOCATE(grid%j_end(num_tiles))
269	grid%max_tiles = num_tiles
270	ENDIF
271
272	DO t = 0, num_tiles-1
273	ntiles = mod(t,num_tiles_x)
274	CALL region_bounds( spx, epx, &
275	num_tiles_x, ntiles, &
276	ts, te )
277	!!!
278	! This bit allows the user to specify execution out onto the halo region
279	! in the call to set_tiles. If the low patch boundary specified by the arguments
280	! is less than what the model already knows to be the patch boundary and if
281	! the user hasn't erred by specifying something that would fall off memory
282	! (safety tests are higher up in this routine, outside the IF) then adjust
283	! the tile boundary of the low edge tiles accordingly. Likewise for high edges.
284	IF ( ips .lt. spx .and. ts .eq. spx ) ts = ips ;
285	IF ( ipe .gt. epx .and. te .eq. epx ) te = ipe ;
286	!!!
287	grid%i_start(t+1) = max ( ts , ids )
288	grid%i_end(t+1) = min ( te , ide )
289	ntiles = t / num_tiles_x
290	CALL region_bounds( spy, epy, &
291	num_tiles_y, ntiles, &
292	ts, te )
293	!
294	IF ( jps .lt. spy .and. ts .eq. spy ) ts = jps ;
295	IF ( jpe .gt. epy .and. te .eq. epy ) te = jpe ;
296	!
297	grid%j_start(t+1) = max ( ts , jds )
298	grid%j_end(t+1) = min ( te , jde )
299	END DO
300	grid%num_tiles = num_tiles
301
302	RETURN
303	END SUBROUTINE set_tiles2
304
305
306	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
307	! this version sets the tiles based on a passed in integer mask
308	! the assumption here is that the mask is relatively straigthforward
309	! and coverable with 2 or three rectangles. No weird stuff...
310
311	SUBROUTINE set_tiles3 ( grid , imask, ims, ime, jms, jme, ips, ipe, jps, jpe )
312	USE module_domain
313	USE module_driver_constants
314	USE module_machine
315	USE module_wrf_error
316
317	IMPLICIT NONE
318
319	! Input data.
320
321	TYPE(domain) , INTENT(INOUT) :: grid
322	INTEGER , INTENT(IN) :: ims , ime , jms , jme
323	INTEGER , INTENT(IN) :: ips , ipe , jps , jpe
324	INTEGER, DIMENSION(ims:ime,jms:jme), INTENT(IN) :: imask
325	INTEGER :: num_tiles
326	INTEGER, DIMENSION(50) :: i_start, i_end, j_start, j_end
327
328	! Output data.
329
330	! Local data.
331
332	CHARACTER*80 :: mess
333
334	CALL set_tiles_masked ( imask, ims, ime, jms, jme, ips, ipe, jps, jpe, &
335	num_tiles, i_start, i_end, j_start, j_end )
336
337	IF ( num_tiles > grid%max_tiles ) THEN
338	IF ( ASSOCIATED(grid%i_start) ) THEN ; DEALLOCATE( grid%i_start ) ; NULLIFY( grid%i_start ) ; ENDIF
339	IF ( ASSOCIATED(grid%i_end) ) THEN ; DEALLOCATE( grid%i_end ) ; NULLIFY( grid%i_end ) ; ENDIF
340	IF ( ASSOCIATED(grid%j_start) ) THEN ; DEALLOCATE( grid%j_start ) ; NULLIFY( grid%j_start ) ; ENDIF
341	IF ( ASSOCIATED(grid%j_end) ) THEN ; DEALLOCATE( grid%j_end ) ; NULLIFY( grid%j_end ) ; ENDIF
342	ALLOCATE(grid%i_start(num_tiles))
343	ALLOCATE(grid%i_end(num_tiles))
344	ALLOCATE(grid%j_start(num_tiles))
345	ALLOCATE(grid%j_end(num_tiles))
346	grid%max_tiles = num_tiles
347	ENDIF
348	grid%num_tiles = num_tiles
349	grid%i_start(1:num_tiles) = i_start(1:num_tiles)
350	grid%i_end(1:num_tiles) = i_end(1:num_tiles)
351	grid%j_start(1:num_tiles) = j_start(1:num_tiles)
352	grid%j_end(1:num_tiles) = j_end(1:num_tiles)
353
354	RETURN
355	END SUBROUTINE set_tiles3
356
357	SUBROUTINE set_tiles_masked ( imask, ims, ime, jms, jme, ips, ipe, jps, jpe, &
358	num_tiles, istarts, iends, jstarts, jends )
359
360	IMPLICIT NONE
361
362	! Arguments
363
364	INTEGER , INTENT(IN) :: ims , ime , jms , jme
365	INTEGER, DIMENSION(ims:ime,jms:jme), INTENT(IN) :: imask
366	INTEGER , INTENT(IN) :: ips , ipe , jps , jpe
367	INTEGER , INTENT(OUT) :: num_tiles
368	INTEGER, DIMENSION(*) , INTENT(OUT) :: istarts, iends
369	INTEGER, DIMENSION(*) , INTENT(OUT) :: jstarts, jends
370
371	! Output data.
372
373	! Local data.
374	CHARACTER*80 :: mess
375	INTEGER :: i, j, ir, jr
376	INTEGER :: imaskcopy(ips:ipe,jps:jpe) ! copy of imask to write on
377
378	imaskcopy = imask(ips:ipe,jps:jpe)
379	num_tiles = 0
380	! simple multi-pass scheme, optimize later...
381	DO WHILE (ANY(imaskcopy == 1))
382	DO j = jps,jpe
383	DO i = ips,ipe
384	! find first "1" and build a rectangle from it
385	IF ( imaskcopy(i,j) == 1 ) THEN
386	num_tiles = num_tiles + 1
387	istarts(num_tiles) = i
388	iends(num_tiles) = i
389	jstarts(num_tiles) = j
390	jends(num_tiles) = j
391	! don't check this point again
392	imaskcopy(i,j) = 0
393	! find length of first row
394	DO ir = istarts(num_tiles)+1,ipe
395	IF ( imaskcopy(ir,j) == 1 ) THEN
396	iends(num_tiles) = ir
397	! don't check this point again
398	imaskcopy(ir,j) = 0
399	ELSE
400	EXIT
401	ENDIF
402	ENDDO
403	! find number of rows
404	DO jr = jstarts(num_tiles)+1,jpe
405	IF (ALL(imaskcopy(istarts(num_tiles):iends(num_tiles),jr) == 1)) THEN
406	jends(num_tiles) = jr
407	! don't check these points again
408	imaskcopy(istarts(num_tiles):iends(num_tiles),jr) = 0
409	ELSE
410	EXIT
411	ENDIF
412	ENDDO
413	ENDIF ! if ( imaskcopy(i,j) == 1 )
414	ENDDO
415	ENDDO
416	ENDDO
417	RETURN
418	END SUBROUTINE set_tiles_masked
419
420
421	SUBROUTINE init_module_tiles
422	END SUBROUTINE init_module_tiles
423
424	END MODULE module_tiles
425

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format