Context Navigation

TEST_RESULTS

Last change on this file was 11, checked in by aslmd, 14 years ago
spiga@svn-planeto:ajoute le modele meso-echelle martien
File size: 6.9 KB

Line
1	file TEST_RESULTS
2	Tom Henderson
3
4	A series of tests were run on AIX and OSF1 machines prior to committing
5	Todd Hutchinson's grib1 and grib2 packages to the repository. These are
6	described in detail below.
7
8	In addition, Todd ran many tests on his Linux systems, including a pass
9	through vgrind for memory checking.
10
11
12	NOTE ONE KNOWN BUG:
13	RUC LSM fails in lsmrucinit() when grib1 input is used (divide-by-zero
14	error). Not sure if this is due to compression (accuracy -- sure hope
15	not!) or due to some mis-configuration of gribmap.txt, or something
16	else.
17
18
19	+------------------+
20	\| TEST DEFINITIONS \|
21	+------------------+
22	ALL TESTS were run with the jan00 test case using default settings from
23	test/em_real/namelist.input.jan01 unless otherwise indicated below.
24
25	TESTan: Read netCDF, write netCDF, 1 MPI task
26	TESTbn: Read netCDF, write netCDF, 4 MPI tasks
27	TESTcn: Read netCDF, write netCDF bitwise identical, 1 vs. 4 MPI tasks
28	TESTdn: Write netCDF from real
29	TESTqn: Read netCDF, write netCDF, 4 MPI tasks + 2 MPI quilt tasks
30	TESTrn: TESTqn wrfout file vs. TESTan, bitwise identical
31	TESTa1: Read netCDF, write grib1, 1 MPI task
32	TESTb1: Read netCDF, write grib1, 4 MPI tasks
33	TESTc1: Read netCDF, write grib1 bitwise identical, 1 vs. 4 MPI tasks
34	TESTd1: Write grib1 from real
35	TESTe1: Read grib1, write netCDF, 1 MPI task
36	TESTf1: Read grib1, write netCDF, 4 MPI tasks
37	TESTg1: Read grib1, write netCDF bitwise identical, 1 vs. 4 MPI tasks
38	TESTh1: TESTe1 wrfout file vs. TESTan, bitwise identical
39	TESTq1: Read netCDF, write grib1, 4 MPI tasks + 2 MPI quilt tasks
40	TESTr1: TESTq1 wrfout file vs. TESTa1, bitwise identical
41	TESTa2: Read netCDF, write grib2, 1 MPI task
42	TESTb2: Read netCDF, write grib2, 4 MPI tasks
43	TESTc2: Read netCDF, write grib2 bitwise identical, 1 vs. 4 MPI tasks
44	TESTd2: Write grib2 from real
45	TESTe2: Read grib2, write netCDF, 1 MPI task
46	TESTf2: Read grib2, write netCDF, 4 MPI tasks
47	TESTg2: Read grib2, write netCDF bitwise identical, 1 vs. 4 MPI tasks
48	TESTh2: TESTe2 wrfout file vs. TESTan, bitwise identical
49	TESTq2: Read netCDF, write grib2, 4 MPI tasks + 2 MPI quilt tasks
50	TESTr2: TESTq2 wrfout file vs. TESTa2, bitwise identical
51	TESTab: Read netCDF, write binary, 1 MPI task
52	TESTbb: Read netCDF, write binary, 4 MPI tasks
53	TESTcb: Read netCDF, write binary bitwise identical, 1 vs. 4 MPI tasks
54	TESTdb: Write binary from real
55	TESTeb: Read binary, write netCDF, 1 MPI task
56	TESTfb: Read binary, write netCDF, 4 MPI tasks
57	TESTgb: Read binary, write netCDF bitwise identical, 1 vs. 4 MPI tasks
58	TESThb: TESTeb wrfout file vs. TESTan, bitwise identical
59	TESTib: Read binary, write binary, 4 MPI tasks
60	TESTjb: TESTbb wrfout file vs. TESTib, bitwise identical
61	TESTqb: Read netCDF, write binary, 4 MPI tasks + 2 MPI quilt tasks
62	TESTrb: TESTqb wrfout file vs. TESTab, bitwise identical
63
64
65	+-------------------+
66	\| TEST RESULT TABLE \|
67	+-------------------+
68	TEST RESULT TABLE KEYS:
69	Tested Configurations:
70	v6j bluevista, config=3, OBJECT_MODE=64, built with jasper
71	v6 bluevista, config=3, OBJECT_MODE=64, built without jasper
72	s3j bluesky, config=3, OBJECT_MODE=32, built with jasper
73	s3 bluesky, config=3, OBJECT_MODE=32, built without jasper
74	s6j bluesky, config=3, OBJECT_MODE=64, built with jasper
75	j joshua, config=5, no optimization, built without jasper
76	Test Results:
77	'P' PASS
78	'P1' PASS, but see note "1"
79	'F' FAIL
80	'X' Skip test. (For example, grib2 tests cannot be done without jasper).
81	' ' To Be Done
82	+------------------------------------------+---+---+---+---+---+---+
83	\| VERSION: trunk_r1718_WORK Config \|v6j\|v6 \|s3j\|s3 \|s6j\| j \|
84	+------------------------------------------+---+---+---+---+---+---+
85	\| TESTan: RnetCDF WnetCDF 1 MPI \| P \| P \| P \| P \| P \| P \|
86	\| TESTbn: RnetCDF WnetCDF 4 MPI \| P \| P \| P \| P \| P \| P \|
87	\| TESTcn: RnetCDF WnetCDF 1 vs. 4 MPI \| P \| P \| P \| P \| P \| P \|
88	\| TESTdn: WnetCDF from real \| P \| P \| P \| P \| P \| P \|
89	\| TESTqn: RnetCDF WnetCDF 4 MPI + 2 quilt \| P \| P \| P \| P \| P \| P \|
90	\| TESTrn: TESTan vs. TESTqn \| P \| P \| P \| P \| P \| P \|
91	\| TESTa1: RnetCDF Wgrib1 1 MPI \| P \| P \| P \| P \| P \| P \|
92	\| TESTb1: RnetCDF Wgrib1 4 MPI \| P \| P \| P \| P \| P \| P \|
93	\| TESTc1: RnetCDF Wgrib1 1 vs. 4 MPI \| P \| P \| P \| P \| P \| P \|
94	\| TESTd1: Wgrib1 from real \| P \| P \| P \| P \| P \| P \|
95	\| TESTe1: Rgrib1 WnetCDF 1 MPI \| P \| P \| P \| P \| P \| P \|
96	\| TESTf1: Rgrib1 WnetCDF 4 MPI \| P \| P \| P \| P \| P \| P \|
97	\| TESTg1: Rgrib1 WnetCDF 1 vs. 4 MPI \| P \| P \| P \| P \| P \| P \|
98	\| TESTh1: TESTe1 vs. all-netCDF \| P\| P\| P\| P\| P*\| \|
99	\| TESTq1: RnetCDF Wgrib1 4 MPI + 2 quilt \| P \| P \| P \| P \| P \| P \|
100	\| TESTr1: TESTa1 vs. TESTq1 \| P1\| P1\| P1\| P1\| P1\| P1\|
101	\| TESTa2: RnetCDF Wgrib2 1 MPI \| P \| X \| P \| X \| P \| X \|
102	\| TESTb2: RnetCDF Wgrib2 4 MPI \| P \| X \| P \| X \| P \| X \|
103	\| TESTc2: RnetCDF Wgrib2 1 vs. 4 MPI \| P \| X \| P \| X \| P \| X \|
104	\| TESTd2: Wgrib2 from real \| P \| X \| P \| X \| P \| X \|
105	\| TESTe2: Rgrib2 WnetCDF 1 MPI \| P \| X \| P \| X \| P \| X \|
106	\| TESTf2: Rgrib2 WnetCDF 4 MPI \| P \| X \| P \| X \| P \| X \|
107	\| TESTg2: Rgrib2 WnetCDF 1 vs. 4 MPI \| P \| X \| P \| X \| P \| X \|
108	\| TESTh2: TESTe2 vs. all-netCDF \| \| X \| \| X \| \| X \|
109	\| TESTq2: RnetCDF Wgrib2 4 MPI + 2 quilt \| P \| X \| P \| X \| P \| X \|
110	\| TESTr2: TESTa2 vs. TESTq2 \| P3\| X \| P3\| X \| P3\| X \|
111	\| TESTab: RnetCDF Wbinary 1 MPI \| P \| P \| P \| P \| P \| P \|
112	\| TESTbb: RnetCDF Wbinary 4 MPI \| P \| P \| P \| P \| P \| P \|
113	\| TESTcb: RnetCDF Wbinary 1 vs. 4 MPI \| P \| P \| P \| P \| P \| P2\|
114	\| TESTdb: Wbinary from real \| P \| P \| P \| P \| P \| P \|
115	\| TESTeb: Rbinary WnetCDF 1 MPI \| P \| P \| P \| P \| P \| P \|
116	\| TESTfb: Rbinary WnetCDF 4 MPI \| P \| P \| P \| P \| P \| P \|
117	\| TESTgb: Rbinary WnetCDF 1 vs. 4 MPI \| P \| P \| P \| P \| P \| P \|
118	\| TESThb: TESTeb vs. all-netCDF \| P \| P \| P \| P \| P \| P \|
119	\| TESTib: Rbinary Wbinary 4 MPI \| P \| P \| P \| P \| P \| P \|
120	\| TESTjb: TESTbb vs. TESTib \| P2\| P2\| P2\| P2\| P2\| P2\|
121	\| TESTqb: RnetCDF Wbinary 4 MPI + 2 quilt \| P \| P \| P \| P \| P \| P \|
122	\| TESTrb: TESTab vs. TESTqb \| P2\| P2\| P2\| P2\| P2\| P2\|
123	+------------------------------------------+---+---+---+---+---+---+
124	\| NOTES: \|
125	\| * Jimy says this looks OK but someone should compare \|
126	\| plots... \|
127	\| 1 For TESTr1, some bytes differ but \|
128	\| external/io_grib1/diffwrf says files match. \|
129	\| 2 For TESTjb and TESTrb, some bytes differ but \|
130	\| external/io_int/diffwrf says files match. \|
131	\| 3 For TESTr2, some bytes differ, need to test with grib2 \|
132	\| version of diffwrf. \|
133	+--------------------------------------------------------------+
134

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format