Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

module_initialize_grav2d_x.F @ 3555

Last change on this file since 3555 was 11, checked in by aslmd, 14 years ago
spiga@svn-planeto:ajoute le modele meso-echelle martien
File size: 24.9 KB

Line
1	!IDEAL:MODEL_LAYER:INITIALIZATION
2	!
3
4	! This MODULE holds the routines which are used to perform various initializations
5	! for the individual domains.
6
7	! This MODULE CONTAINS the following routines:
8
9	! initialize_field_test - 1. Set different fields to different constant
10	! values. This is only a test. If the correct
11	! domain is not found (based upon the "id")
12	! then a fatal error is issued.
13
14	!-----------------------------------------------------------------------
15
16	MODULE module_initialize
17
18	USE module_domain
19	USE module_io_domain
20	USE module_state_description
21	USE module_model_constants
22	USE module_bc
23	USE module_timing
24	USE module_configure
25	USE module_init_utilities
26	#ifdef DM_PARALLEL
27	USE module_dm
28	#endif
29
30
31	CONTAINS
32
33
34	!-------------------------------------------------------------------
35	! this is a wrapper for the solver-specific init_domain routines.
36	! Also dereferences the grid variables and passes them down as arguments.
37	! This is crucial, since the lower level routines may do message passing
38	! and this will get fouled up on machines that insist on passing down
39	! copies of assumed-shape arrays (by passing down as arguments, the
40	! data are treated as assumed-size -- ie. f77 -- arrays and the copying
41	! business is avoided). Fie on the F90 designers. Fie and a pox.
42
43	SUBROUTINE init_domain ( grid )
44
45	IMPLICIT NONE
46
47	! Input data.
48	TYPE (domain), POINTER :: grid
49	! Local data.
50	INTEGER :: dyn_opt
51	INTEGER :: idum1, idum2
52
53	CALL nl_get_dyn_opt( 1, dyn_opt )
54
55	CALL set_scalar_indices_from_config ( head_grid%id , idum1, idum2 )
56
57	IF ( dyn_opt .eq. 1 &
58	.or. dyn_opt .eq. 2 &
59	.or. dyn_opt .eq. 3 &
60	) THEN
61	CALL init_domain_rk( grid &
62	!
63	#include <em_actual_new_args.inc>
64	!
65	)
66
67	ELSE
68	WRITE(0,*)' init_domain: unknown or unimplemented dyn_opt = ',dyn_opt
69	CALL wrf_error_fatal ( ' init_domain: unknown or unimplemented dyn_opt ' )
70	ENDIF
71
72	END SUBROUTINE init_domain
73
74	!-------------------------------------------------------------------
75
76	SUBROUTINE init_domain_rk ( grid &
77	!
78	# include <em_dummy_new_args.inc>
79	!
80	)
81	IMPLICIT NONE
82
83	! Input data.
84	TYPE (domain), POINTER :: grid
85
86	# include <em_dummy_new_decl.inc>
87
88	TYPE (grid_config_rec_type) :: config_flags
89
90	! Local data
91	INTEGER :: &
92	ids, ide, jds, jde, kds, kde, &
93	ims, ime, jms, jme, kms, kme, &
94	its, ite, jts, jte, kts, kte, &
95	i, j, k
96
97	! Local data
98
99	INTEGER, PARAMETER :: nl_max = 1000
100	REAL, DIMENSION(nl_max) :: zk, p_in, theta, rho, u, v, qv, pd_in
101	INTEGER :: nl_in
102
103
104	INTEGER :: icm,jcm, ii, im1, jj, jm1, loop, error, fid, nxc, nyc
105	REAL :: u_mean,v_mean, f0, p_surf, p_level, qvf, z_at_v, z_at_u
106	REAL :: z_scale, xrad, yrad, zrad, rad, delt, cof1, cof2, t_min, t_max
107	! REAL, EXTERNAL :: interp_0
108	REAL :: hm, xa, xpos, xposml, xpospl
109	REAL :: pi
110
111	! stuff from original initialization that has been dropped from the Registry
112	REAL :: vnu, xnu, xnus, dinit0, cbh, p0_temp, t0_temp, zd, zt
113	REAL :: qvf1, qvf2, pd_surf
114	INTEGER :: it
115	real :: thtmp, ptmp, temp(3)
116
117	LOGICAL :: moisture_init
118	LOGICAL :: stretch_grid, dry_sounding
119
120	REAL :: xa1, xal1,pii,hm1 ! data for intercomparison setup from dale
121
122	#ifdef DM_PARALLEL
123	# include <em_data_calls.inc>
124	#endif
125
126
127	SELECT CASE ( model_data_order )
128	CASE ( DATA_ORDER_ZXY )
129	kds = grid%sd31 ; kde = grid%ed31 ;
130	ids = grid%sd32 ; ide = grid%ed32 ;
131	jds = grid%sd33 ; jde = grid%ed33 ;
132
133	kms = grid%sm31 ; kme = grid%em31 ;
134	ims = grid%sm32 ; ime = grid%em32 ;
135	jms = grid%sm33 ; jme = grid%em33 ;
136
137	kts = grid%sp31 ; kte = grid%ep31 ; ! note that tile is entire patch
138	its = grid%sp32 ; ite = grid%ep32 ; ! note that tile is entire patch
139	jts = grid%sp33 ; jte = grid%ep33 ; ! note that tile is entire patch
140	CASE ( DATA_ORDER_XYZ )
141	ids = grid%sd31 ; ide = grid%ed31 ;
142	jds = grid%sd32 ; jde = grid%ed32 ;
143	kds = grid%sd33 ; kde = grid%ed33 ;
144
145	ims = grid%sm31 ; ime = grid%em31 ;
146	jms = grid%sm32 ; jme = grid%em32 ;
147	kms = grid%sm33 ; kme = grid%em33 ;
148
149	its = grid%sp31 ; ite = grid%ep31 ; ! note that tile is entire patch
150	jts = grid%sp32 ; jte = grid%ep32 ; ! note that tile is entire patch
151	kts = grid%sp33 ; kte = grid%ep33 ; ! note that tile is entire patch
152	CASE ( DATA_ORDER_XZY )
153	ids = grid%sd31 ; ide = grid%ed31 ;
154	kds = grid%sd32 ; kde = grid%ed32 ;
155	jds = grid%sd33 ; jde = grid%ed33 ;
156
157	ims = grid%sm31 ; ime = grid%em31 ;
158	kms = grid%sm32 ; kme = grid%em32 ;
159	jms = grid%sm33 ; jme = grid%em33 ;
160
161	its = grid%sp31 ; ite = grid%ep31 ; ! note that tile is entire patch
162	kts = grid%sp32 ; kte = grid%ep32 ; ! note that tile is entire patch
163	jts = grid%sp33 ; jte = grid%ep33 ; ! note that tile is entire patch
164
165	END SELECT
166
167
168	hm = 000.
169	xa = 5.0
170
171	icm = ide/2
172
173
174	xa1 = 5000./500.
175	xal1 = 4000./500.
176	pii = 2.*asin(1.0)
177	hm1 = 250.
178	! hm1 = 1000.
179
180
181	stretch_grid = .true.
182	! z_scale = .50
183	z_scale = 1.675
184	pi = 2.*asin(1.0)
185	write(6,*) ' pi is ',pi
186	nxc = (ide-ids)/2
187	nyc = (jde-jds)/2
188
189	CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
190
191	! here we check to see if the boundary conditions are set properly
192
193	CALL boundary_condition_check( config_flags, bdyzone, error, grid%id )
194
195	moisture_init = .true.
196
197	grid%itimestep=0
198
199	#ifdef DM_PARALLEL
200	CALL wrf_dm_bcast_bytes( icm , IWORDSIZE )
201	CALL wrf_dm_bcast_bytes( jcm , IWORDSIZE )
202	#endif
203
204	CALL nl_set_mminlu(1, ' ')
205	CALL nl_set_iswater(1,0)
206	CALL nl_set_cen_lat(1,40.)
207	CALL nl_set_cen_lon(1,-105.)
208	CALL nl_set_truelat1(1,0.)
209	CALL nl_set_truelat2(1,0.)
210	CALL nl_set_moad_cen_lat (1,0.)
211	CALL nl_set_stand_lon (1,0.)
212	CALL nl_set_map_proj(1,0)
213
214
215	! here we initialize data we currently is not initialized
216	! in the input data
217
218	DO j = jts, jte
219	DO i = its, ite
220	grid%msft(i,j) = 1.
221	grid%msfu(i,j) = 1.
222	grid%msfv(i,j) = 1.
223	grid%sina(i,j) = 0.
224	grid%cosa(i,j) = 1.
225	grid%e(i,j) = 0.
226	grid%f(i,j) = 0.
227
228	END DO
229	END DO
230
231	DO j = jts, jte
232	DO k = kts, kte
233	DO i = its, ite
234	grid%em_ww(i,k,j) = 0.
235	END DO
236	END DO
237	END DO
238
239	grid%step_number = 0
240
241	! set up the grid
242
243	IF (stretch_grid) THEN ! exponential stretch for eta (nearly constant dz)
244	DO k=1, kde
245	grid%em_znw(k) = (exp(-(k-1)/float(kde-1)/z_scale) - exp(-1./z_scale))/ &
246	(1.-exp(-1./z_scale))
247	ENDDO
248	ELSE
249	DO k=1, kde
250	grid%em_znw(k) = 1. - float(k-1)/float(kde-1)
251	ENDDO
252	ENDIF
253
254	DO k=1, kde-1
255	grid%em_dnw(k) = grid%em_znw(k+1) - grid%em_znw(k)
256	grid%em_rdnw(k) = 1./grid%em_dnw(k)
257	grid%em_znu(k) = 0.5*(grid%em_znw(k+1)+grid%em_znw(k))
258	ENDDO
259	DO k=2, kde-1
260	grid%em_dn(k) = 0.5*(grid%em_dnw(k)+grid%em_dnw(k-1))
261	grid%em_rdn(k) = 1./grid%em_dn(k)
262	grid%em_fnp(k) = .5* grid%em_dnw(k )/grid%em_dn(k)
263	grid%em_fnm(k) = .5* grid%em_dnw(k-1)/grid%em_dn(k)
264	ENDDO
265
266	cof1 = (2.grid%em_dn(2)+grid%em_dn(3))/(grid%em_dn(2)+grid%em_dn(3))grid%em_dnw(1)/grid%em_dn(2)
267	cof2 = grid%em_dn(2) /(grid%em_dn(2)+grid%em_dn(3))*grid%em_dnw(1)/grid%em_dn(3)
268	grid%cf1 = grid%em_fnp(2) + cof1
269	grid%cf2 = grid%em_fnm(2) - cof1 - cof2
270	grid%cf3 = cof2
271
272	grid%cfn = (.5*grid%em_dnw(kde-1)+grid%em_dn(kde-1))/grid%em_dn(kde-1)
273	grid%cfn1 = -.5*grid%em_dnw(kde-1)/grid%em_dn(kde-1)
274	grid%rdx = 1./config_flags%dx
275	grid%rdy = 1./config_flags%dy
276
277	! get the sounding from the ascii sounding file, first get dry sounding and
278	! calculate base state
279
280	write(6,*) ' getting dry sounding for base state '
281	dry_sounding = .true.
282	CALL get_sounding( zk, p_in, pd_in, theta, rho, u, v, qv, dry_sounding, &
283	nl_max, nl_in, .true.)
284
285	write(6,*) ' returned from reading sounding, nl_in is ',nl_in
286
287
288	! find ptop for the desired ztop (ztop is input from the namelist),
289	! and find surface pressure
290
291	grid%p_top = interp_0( p_in, zk, config_flags%ztop, nl_in )
292
293	DO j=jts,jte
294	DO i=its,ite ! flat surface
295	!! grid%ht(i,j) = 0.
296	grid%ht(i,j) = hm/(1.+(float(i-icm)/xa)**2)
297	! grid%ht(i,j) = hm1exp(-(( float(i-icm)/xa1)*2)) &
298	! ( (cos(piifloat(i-icm)/xal1))**2 )
299	grid%em_phb(i,1,j) = g*grid%ht(i,j)
300	grid%em_php(i,1,j) = 0.
301	grid%em_ph0(i,1,j) = grid%em_phb(i,1,j)
302	ENDDO
303	ENDDO
304
305	DO J = jts, jte
306	DO I = its, ite
307
308	p_surf = interp_0( p_in, zk, grid%em_phb(i,1,j)/g, nl_in )
309	grid%em_mub(i,j) = p_surf-grid%p_top
310
311	! this is dry hydrostatic sounding (base state), so given p (coordinate),
312	! interp theta (from interp) and compute 1/rho from eqn. of state
313
314	DO K = 1, kte-1
315	p_level = grid%em_znu(k)*(p_surf - grid%p_top) + grid%p_top
316	grid%em_pb(i,k,j) = p_level
317	grid%em_t_init(i,k,j) = interp_0( theta, p_in, p_level, nl_in ) - t0
318	grid%em_alb(i,k,j) = (r_d/p1000mb)(grid%em_t_init(i,k,j)+t0)(grid%em_pb(i,k,j)/p1000mb)**cvpm
319	ENDDO
320
321	! calc hydrostatic balance (alternatively we could interp the geopotential from the
322	! sounding, but this assures that the base state is in exact hydrostatic balance with
323	! respect to the model eqns.
324
325	DO k = 2,kte
326	grid%em_phb(i,k,j) = grid%em_phb(i,k-1,j) - grid%em_dnw(k-1)grid%em_mub(i,j)grid%em_alb(i,k-1,j)
327	ENDDO
328
329	ENDDO
330	ENDDO
331
332	write(6,*) ' ptop is ',grid%p_top
333	write(6,*) ' base state mub(1,1), p_surf is ',grid%em_mub(1,1),grid%em_mub(1,1)+grid%p_top
334
335	! calculate full state for each column - this includes moisture.
336
337	write(6,*) ' getting moist sounding for full state '
338	dry_sounding = .false.
339	CALL get_sounding( zk, p_in, pd_in, theta, rho, u, v, qv, dry_sounding, &
340	nl_max, nl_in, .false. )
341
342	DO J = jts, min(jde-1,jte)
343	DO I = its, min(ide-1,ite)
344
345	! At this point grid%p_top is already set. find the DRY mass in the column
346	! by interpolating the DRY pressure.
347
348	pd_surf = interp_0( pd_in, zk, grid%em_phb(i,1,j)/g, nl_in )
349
350	! compute the perturbation mass and the full mass
351
352	grid%em_mu_1(i,j) = pd_surf-grid%p_top - grid%em_mub(i,j)
353	grid%em_mu_2(i,j) = grid%em_mu_1(i,j)
354	grid%em_mu0(i,j) = grid%em_mu_1(i,j) + grid%em_mub(i,j)
355
356	! given the dry pressure and coordinate system, interp the potential
357	! temperature and qv
358
359	do k=1,kde-1
360
361	p_level = grid%em_znu(k)*(pd_surf - grid%p_top) + grid%p_top
362
363	grid%moist(i,k,j,P_QV) = interp_0( qv, pd_in, p_level, nl_in )
364	grid%em_t_1(i,k,j) = interp_0( theta, pd_in, p_level, nl_in ) - t0
365	grid%em_t_2(i,k,j) = grid%em_t_1(i,k,j)
366
367
368	enddo
369
370	! integrate the hydrostatic equation (from the RHS of the bigstep
371	! vertical momentum equation) down from the top to get p.
372	! first from the top of the model to the top pressure
373
374	k = kte-1 ! top level
375
376	qvf1 = 0.5*(grid%moist(i,k,j,P_QV)+grid%moist(i,k,j,P_QV))
377	qvf2 = 1./(1.+qvf1)
378	qvf1 = qvf1*qvf2
379
380	! grid%em_p(i,k,j) = - 0.5*grid%em_mu_1(i,j)/grid%em_rdnw(k)
381	grid%em_p(i,k,j) = - 0.5(grid%em_mu_1(i,j)+qvf1grid%em_mub(i,j))/grid%em_rdnw(k)/qvf2
382	qvf = 1. + rvovrd*moist(i,k,j,P_QV)
383	grid%em_alt(i,k,j) = (r_d/p1000mb)(grid%em_t_1(i,k,j)+t0)qvf* &
384	(((grid%em_p(i,k,j)+grid%em_pb(i,k,j))/p1000mb)**cvpm)
385	grid%em_al(i,k,j) = grid%em_alt(i,k,j) - grid%em_alb(i,k,j)
386
387	! down the column
388
389	do k=kte-2,1,-1
390	qvf1 = 0.5*(moist(i,k,j,P_QV)+moist(i,k+1,j,P_QV))
391	qvf2 = 1./(1.+qvf1)
392	qvf1 = qvf1*qvf2
393	grid%em_p(i,k,j) = grid%em_p(i,k+1,j) - (grid%em_mu_1(i,j) + qvf1*grid%em_mub(i,j))/qvf2/grid%em_rdn(k+1)
394	qvf = 1. + rvovrd*moist(i,k,j,P_QV)
395	grid%em_alt(i,k,j) = (r_d/p1000mb)(grid%em_t_1(i,k,j)+t0)qvf* &
396	(((grid%em_p(i,k,j)+grid%em_pb(i,k,j))/p1000mb)**cvpm)
397	grid%em_al(i,k,j) = grid%em_alt(i,k,j) - grid%em_alb(i,k,j)
398	enddo
399
400	! this is the hydrostatic equation used in the model after the
401	! small timesteps. In the model, al (inverse density)
402	! is computed from the geopotential.
403
404
405	grid%em_ph_1(i,1,j) = 0.
406	DO k = 2,kte
407	grid%em_ph_1(i,k,j) = grid%em_ph_1(i,k-1,j) - (1./grid%em_rdnw(k-1))*( &
408	(grid%em_mub(i,j)+grid%em_mu_1(i,j))*grid%em_al(i,k-1,j)+ &
409	grid%em_mu_1(i,j)*grid%em_alb(i,k-1,j) )
410
411	grid%em_ph_2(i,k,j) = grid%em_ph_1(i,k,j)
412	grid%em_ph0(i,k,j) = grid%em_ph_1(i,k,j) + grid%em_phb(i,k,j)
413	ENDDO
414
415	if((i==2) .and. (j==2)) then
416	write(6,*) ' ph_1 calc ',grid%em_ph_1(2,1,2),grid%em_ph_1(2,2,2),&
417	grid%em_mu_1(2,2)+grid%em_mub(2,2),grid%em_mu_1(2,2), &
418	grid%em_alb(2,1,2),grid%em_al(1,2,1),grid%em_rdnw(1)
419	endif
420
421	ENDDO
422	ENDDO
423
424	! cold bubble input (from straka et al, IJNMF, vol 17, 1993 pp 1-22)
425
426	t_min = grid%em_t_1(its,kts,jts)
427	t_max = t_min
428	u_mean = 00.
429
430	xpos = config_flags%dxnxc - u_mean900.
431	xposml = xpos - config_flags%dx*(ide-1)
432	xpospl = xpos + config_flags%dx*(ide-1)
433
434	DO J = jts, min(jde-1,jte)
435	DO I = its, min(ide-1,ite)
436	! xrad = config_flags%dx*float(i-nxc)/4000. ! 4000 meter horizontal radius
437	! ! centered in the domain
438
439	xrad = min( abs(config_flags%dx*float(i)-xpos), &
440	abs(config_flags%dx*float(i)-xposml), &
441	abs(config_flags%dx*float(i)-xpospl))/4000.
442
443	DO K = 1, kte-1
444
445	! put in preturbation theta (bubble) and recalc density. note,
446	! the mass in the column is not changing, so when theta changes,
447	! we recompute density and geopotential
448
449	zrad = 0.5*(grid%em_ph_1(i,k,j)+grid%em_ph_1(i,k+1,j) &
450	+grid%em_phb(i,k,j)+grid%em_phb(i,k+1,j))/g
451	zrad = (zrad-3000.)/2000. ! 2000 meter vertical radius,
452	! centered at z=3000,
453	RAD=SQRT(xradxrad+zradzrad)
454	IF(RAD <= 1.) THEN
455
456	! perturbation temperature is 15 C, convert to potential temperature
457
458	delt = -15.0 / ((grid%em_p(i,k,j)+grid%em_pb(i,k,j))/p1000mb)**rcp
459
460	grid%em_T_1(i,k,j)=grid%em_T_1(i,k,j)+delt(COS(PIRAD)+1.0)/2.
461	grid%em_T_2(i,k,j)=grid%em_T_1(i,k,j)
462	qvf = 1. + rvovrd*moist(i,k,j,P_QV)
463	grid%em_alt(i,k,j) = (r_d/p1000mb)(grid%em_t_1(i,k,j)+t0)qvf* &
464	(((grid%em_p(i,k,j)+grid%em_pb(i,k,j))/p1000mb)**cvpm)
465	grid%em_al(i,k,j) = grid%em_alt(i,k,j) - grid%em_alb(i,k,j)
466	ENDIF
467
468	t_min = min(t_min, grid%em_t_1(i,k,j))
469	t_max = max(t_max, grid%em_t_1(i,k,j))
470	ENDDO
471
472	! rebalance hydrostatically
473
474	DO k = 2,kte
475	grid%em_ph_1(i,k,j) = grid%em_ph_1(i,k-1,j) - (1./grid%em_rdnw(k-1))*( &
476	(grid%em_mub(i,j)+grid%em_mu_1(i,j))*grid%em_al(i,k-1,j)+ &
477	grid%em_mu_1(i,j)*grid%em_alb(i,k-1,j) )
478
479	grid%em_ph_2(i,k,j) = grid%em_ph_1(i,k,j)
480	grid%em_ph0(i,k,j) = grid%em_ph_1(i,k,j) + grid%em_phb(i,k,j)
481	ENDDO
482
483	ENDDO
484	ENDDO
485
486	write(6,*) ' min and max theta perturbation ',t_min,t_max
487
488
489
490
491	! -- end bubble insert
492
493	write(6,*) ' mu_1 from comp ', grid%em_mu_1(1,1)
494	write(6,*) ' full state sounding from comp, ph, p, al, t_1, qv '
495	do k=1,kde-1
496	write(6,'(i3,1x,5(1x,1pe10.3))') k, grid%em_ph_1(1,k,1)+grid%em_phb(1,k,1), &
497	grid%em_p(1,k,1)+grid%em_pb(1,k,1), grid%em_alt(1,k,1), &
498	grid%em_t_1(1,k,1)+t0, moist(1,k,1,P_QV)
499	enddo
500
501	write(6,*) ' pert state sounding from comp, ph_1, pp, alp, t_1, qv '
502	do k=1,kde-1
503	write(6,'(i3,1x,5(1x,1pe10.3))') k, grid%em_ph_1(1,k,1), &
504	grid%em_p(1,k,1), grid%em_al(1,k,1), &
505	grid%em_t_1(1,k,1), moist(1,k,1,P_QV)
506	enddo
507
508	write(6,*) ' '
509	write(6,*) ' k, model level, dz '
510	do k=1,kde-1
511	write(6,'(i3,1x,e12.5,1x,f10.2)') k, &
512	.5*(grid%em_ph_1(1,k,1)+grid%em_phb(1,k,1)+grid%em_ph_1(1,k+1,1)+grid%em_phb(1,k+1,1))/g, &
513	(grid%em_ph_1(1,k+1,1)+grid%em_phb(1,k+1,1)-grid%em_ph_1(1,k,1)-grid%em_phb(1,k,1))/g
514	enddo
515	write(6,*) ' model top (m) is ', (grid%em_ph_1(1,kde,1)+grid%em_phb(1,kde,1))/g
516
517
518	! interp v
519
520	DO J = jts, jte
521	DO I = its, min(ide-1,ite)
522
523	IF (j == jds) THEN
524	z_at_v = grid%em_phb(i,1,j)/g
525	ELSE IF (j == jde) THEN
526	z_at_v = grid%em_phb(i,1,j-1)/g
527	ELSE
528	z_at_v = 0.5*(grid%em_phb(i,1,j)+grid%em_phb(i,1,j-1))/g
529	END IF
530
531	p_surf = interp_0( p_in, zk, z_at_v, nl_in )
532
533	DO K = 1, kte
534	p_level = grid%em_znu(k)*(p_surf - grid%p_top) + grid%p_top
535	grid%em_v_1(i,k,j) = interp_0( v, p_in, p_level, nl_in )
536	grid%em_v_2(i,k,j) = grid%em_v_1(i,k,j)
537	ENDDO
538
539	ENDDO
540	ENDDO
541
542	! interp u
543
544	DO J = jts, min(jde-1,jte)
545	DO I = its, ite
546
547	IF (i == ids) THEN
548	z_at_u = grid%em_phb(i,1,j)/g
549	ELSE IF (i == ide) THEN
550	z_at_u = grid%em_phb(i-1,1,j)/g
551	ELSE
552	z_at_u = 0.5*(grid%em_phb(i,1,j)+grid%em_phb(i-1,1,j))/g
553	END IF
554
555	p_surf = interp_0( p_in, zk, z_at_u, nl_in )
556
557	DO K = 1, kte
558	p_level = grid%em_znu(k)*(p_surf - grid%p_top) + grid%p_top
559	grid%em_u_1(i,k,j) = interp_0( u, p_in, p_level, nl_in )
560	grid%em_u_2(i,k,j) = grid%em_u_1(i,k,j)
561	ENDDO
562
563	ENDDO
564	ENDDO
565
566	! set w
567
568	DO J = jts, min(jde-1,jte)
569	DO K = kts, kte
570	DO I = its, min(ide-1,ite)
571	grid%em_w_1(i,k,j) = 0.
572	grid%em_w_2(i,k,j) = 0.
573	ENDDO
574	ENDDO
575	ENDDO
576
577	! set a few more things
578
579	DO J = jts, min(jde-1,jte)
580	DO K = kts, kte-1
581	DO I = its, min(ide-1,ite)
582	grid%h_diabatic(i,k,j) = 0.
583	ENDDO
584	ENDDO
585	ENDDO
586
587	DO k=1,kte-1
588	grid%em_t_base(k) = grid%em_t_1(1,k,1)
589	grid%qv_base(k) = moist(1,k,1,P_QV)
590	grid%u_base(k) = grid%em_u_1(1,k,1)
591	grid%v_base(k) = grid%em_v_1(1,k,1)
592	grid%z_base(k) = 0.5*(grid%em_phb(1,k,1)+grid%em_phb(1,k+1,1)+grid%em_ph_1(1,k,1)+grid%em_ph_1(1,k+1,1))/g
593	ENDDO
594
595	DO J = jts, min(jde-1,jte)
596	DO I = its, min(ide-1,ite)
597	thtmp = grid%em_t_2(i,1,j)+t0
598	ptmp = grid%em_p(i,1,j)+grid%em_pb(i,1,j)
599	temp(1) = thtmp * (ptmp/p1000mb)**rcp
600	thtmp = grid%em_t_2(i,2,j)+t0
601	ptmp = grid%em_p(i,2,j)+grid%em_pb(i,2,j)
602	temp(2) = thtmp * (ptmp/p1000mb)**rcp
603	thtmp = grid%em_t_2(i,3,j)+t0
604	ptmp = grid%em_p(i,3,j)+grid%em_pb(i,3,j)
605	temp(3) = thtmp * (ptmp/p1000mb)**rcp
606
607	grid%TSK(I,J)=grid%cf1temp(1)+grid%cf2temp(2)+grid%cf3*temp(3)
608	grid%TMN(I,J)=grid%TSK(I,J)-0.5
609	ENDDO
610	ENDDO
611
612	RETURN
613
614	END SUBROUTINE init_domain_rk
615
616	SUBROUTINE init_module_initialize
617	END SUBROUTINE init_module_initialize
618
619	!---------------------------------------------------------------------
620
621	! test driver for get_sounding
622	!
623	! implicit none
624	! integer n
625	! parameter(n = 1000)
626	! real zk(n),p(n),theta(n),rho(n),u(n),v(n),qv(n),pd(n)
627	! logical dry
628	! integer nl,k
629	!
630	! dry = .false.
631	! dry = .true.
632	! call get_sounding( zk, p, pd, theta, rho, u, v, qv, dry, n, nl )
633	! write(6,*) ' input levels ',nl
634	! write(6,*) ' sounding '
635	! write(6,*) ' k height(m) press (Pa) pd(Pa) theta (K) den(kg/m^3) u(m/s) v(m/s) qv(g/g) '
636	! do k=1,nl
637	! write(6,'(1x,i3,8(1x,1pe10.3))') k, zk(k), p(k), pd(k), theta(k), rho(k), u(k), v(k), qv(k)
638	! enddo
639	! end
640	!
641	!---------------------------------------------------------------------------
642
643	subroutine get_sounding( zk, p, p_dry, theta, rho, &
644	u, v, qv, dry, nl_max, nl_in, base_state )
645	implicit none
646
647	integer nl_max, nl_in
648	real zk(nl_max), p(nl_max), theta(nl_max), rho(nl_max), &
649	u(nl_max), v(nl_max), qv(nl_max), p_dry(nl_max)
650	logical dry
651	logical base_state
652
653	integer n, iz
654	parameter(n=1000)
655	logical debug
656	parameter( debug = .false.)
657
658	! input sounding data
659
660	real p_surf, th_surf, qv_surf
661	real pi_surf, pi(n)
662	real h_input(n), th_input(n), qv_input(n), u_input(n), v_input(n)
663
664	! diagnostics
665
666	real rho_surf, p_input(n), rho_input(n)
667	real pm_input(n) ! this are for full moist sounding
668
669	! local data
670
671	real p1000mb,cv,cp,r,cvpm,g
672	parameter (p1000mb = 1.e+05, r = 287, cp = 1003., cv = cp-r, cvpm = -cv/cp, g=9.81 )
673	integer k, it, nl
674	real qvf, qvf1, dz
675
676	! first, read the sounding
677
678	call read_sounding( p_surf, th_surf, qv_surf, &
679	h_input, th_input, qv_input, u_input, v_input,n, nl, debug )
680
681	! iz = 1
682	! do k=2,nl
683	! if(h_input(k) .lt. 12000.) iz = k
684	! enddo
685	! write(6,*) " tropopause ",iz,h_input(iz)
686	! if(dry) then
687	! write(6,*) ' nl is ',nl
688	! do k=1,nl
689	! th_input(k) = th_input(k)+10.+10*float(k)/nl
690	! enddo
691	! write(6,*) ' finished adjusting theta '
692	! endif
693
694	! do k=1,nl
695	! u_input(k) = 2*u_input(k)
696	! enddo
697	!
698	! end if
699
700	if(dry) then
701	do k=1,nl
702	qv_input(k) = 0.
703	enddo
704	endif
705
706	if(debug) write(6,*) ' number of input levels = ',nl
707
708	nl_in = nl
709	if(nl_in .gt. nl_max ) then
710	write(6,*) ' too many levels for input arrays ',nl_in,nl_max
711	call wrf_error_fatal ( ' too many levels for input arrays ' )
712	end if
713
714	! compute diagnostics,
715	! first, convert qv(g/kg) to qv(g/g)
716
717	do k=1,nl
718	qv_input(k) = 0.001*qv_input(k)
719	enddo
720
721	p_surf = 100.*p_surf ! convert to pascals
722	qvf = 1. + rvovrd*qv_input(1)
723	rho_surf = 1./((r/p1000mb)th_surfqvf((p_surf/p1000mb)*cvpm))
724	pi_surf = (p_surf/p1000mb)**(r/cp)
725
726	if(debug) then
727	write(6,*) ' surface density is ',rho_surf
728	write(6,*) ' surface pi is ',pi_surf
729	end if
730
731
732	! integrate moist sounding hydrostatically, starting from the
733	! specified surface pressure
734	! -> first, integrate from surface to lowest level
735
736	qvf = 1. + rvovrd*qv_input(1)
737	qvf1 = 1. + qv_input(1)
738	rho_input(1) = rho_surf
739	dz = h_input(1)
740	do it=1,10
741	pm_input(1) = p_surf &
742	- 0.5dz(rho_surf+rho_input(1))gqvf1
743	rho_input(1) = 1./((r/p1000mb)th_input(1)qvf((pm_input(1)/p1000mb)*cvpm))
744	enddo
745
746	! integrate up the column
747
748	do k=2,nl
749	rho_input(k) = rho_input(k-1)
750	dz = h_input(k)-h_input(k-1)
751	qvf1 = 0.5*(2.+(qv_input(k-1)+qv_input(k)))
752	qvf = 1. + rvovrd*qv_input(k) ! qv is in g/kg here
753
754	do it=1,20
755	pm_input(k) = pm_input(k-1) &
756	- 0.5dz(rho_input(k)+rho_input(k-1))gqvf1
757	rho_input(k) = 1./((r/p1000mb)th_input(k)qvf((pm_input(k)/p1000mb)*cvpm))
758	enddo
759	enddo
760
761	! we have the moist sounding
762
763	! next, compute the dry sounding using p at the highest level from the
764	! moist sounding and integrating down.
765
766	p_input(nl) = pm_input(nl)
767
768	do k=nl-1,1,-1
769	dz = h_input(k+1)-h_input(k)
770	p_input(k) = p_input(k+1) + 0.5dz(rho_input(k)+rho_input(k+1))*g
771	enddo
772
773	! write(6,*) ' zeroing u input '
774
775	do k=1,nl
776
777	zk(k) = h_input(k)
778	p(k) = pm_input(k)
779	p_dry(k) = p_input(k)
780	theta(k) = th_input(k)
781	rho(k) = rho_input(k)
782	u(k) = u_input(k)
783	! u(k) = 0.
784	v(k) = v_input(k)
785	qv(k) = qv_input(k)
786
787	enddo
788
789	if(debug) then
790	write(6,*) ' sounding '
791	write(6,*) ' k height(m) press (Pa) pd(Pa) theta (K) den(kg/m^3) u(m/s) v(m/s) qv(g/g) '
792	do k=1,nl
793	write(6,'(1x,i3,8(1x,1pe10.3))') k, zk(k), p(k), p_dry(k), theta(k), rho(k), u(k), v(k), qv(k)
794	enddo
795
796	end if
797
798	end subroutine get_sounding
799
800	!-------------------------------------------------------
801
802	subroutine read_sounding( ps,ts,qvs,h,th,qv,u,v,n,nl,debug )
803	implicit none
804	integer n,nl
805	real ps,ts,qvs,h(n),th(n),qv(n),u(n),v(n)
806	logical end_of_file
807	logical debug
808
809	integer k
810
811	open(unit=10,file='input_sounding',form='formatted',status='old')
812	rewind(10)
813	read(10,*) ps, ts, qvs
814	if(debug) then
815	write(6,*) ' input sounding surface parameters '
816	write(6,*) ' surface pressure (mb) ',ps
817	write(6,*) ' surface pot. temp (K) ',ts
818	write(6,*) ' surface mixing ratio (g/kg) ',qvs
819	end if
820
821	end_of_file = .false.
822	k = 0
823
824	do while (.not. end_of_file)
825
826	read(10,*,end=100) h(k+1), th(k+1), qv(k+1), u(k+1), v(k+1)
827	k = k+1
828	if(debug) write(6,'(1x,i3,5(1x,e10.3))') k, h(k), th(k), qv(k), u(k), v(k)
829	go to 110
830	100 end_of_file = .true.
831	110 continue
832	enddo
833
834	nl = k
835
836	close(unit=10,status = 'keep')
837
838	end subroutine read_sounding
839
840	END MODULE module_initialize

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format