Context Navigation

source: trunk/UTIL/PYTHON/planetoplot.py @ 665

Last change on this file since 665 was 665, checked in by aslmd, 13 years ago
MESOSCALE : output more physical variables in Registry. update GCM for storm simulations. bug fix in readmeteo with ccn. UTIL PYTHON : bug fix for operation cat (time axis)
Property svn:executable set to ``*
File size: 47.6 KB

Line
1	#######################
2	##### PLANETOPLOT #####
3	#######################
4
5	### A. Spiga -- LMD -- 06~09/2011 -- General building and mapping capabilities
6	### T. Navarro -- LMD -- 10~11/2011 -- Improved use for GCM and added sections + 1Dplot capabilities
7	### A. Colaitis -- LMD -- 11/2011 -- Mostly minor improvements and inter-plot operation capabilities + zrecast interpolation for gcm
8	### A. Spiga -- LMD -- 11~12/2011 -- Extended multivar subplot capabilities + cosmetic changes + general cleaning and tests
9	### A. Colaitis -- LMD -- 12/2011 -- Added movie capability [mencoder must be installed]
10	### A. Spiga -- LMD -- 12/2011 -- Added HTML animated page capability + general tests of consistency [winds, etc...] + consistent generic movie loop
11	### J. Leconte -- LMD -- 02/2012 -- Added area weighted averaging. Compatibility with terrestrial gcm.
12	### A. Spiga -- LMD -- 03/2012 -- Cleaning and improved comments
13	def planetoplot (namefiles,\
14	level=0,\
15	vertmode=0,\
16	proj=None,\
17	back=None,\
18	target=None,
19	stride=3,\
20	var=None,\
21	colorb="def",\
22	winds=False,\
23	addchar=None,\
24	interv=[0,1],\
25	vmin=None,\
26	vmax=None,\
27	tile=False,\
28	zoom=None,\
29	display=True,\
30	hole=False,\
31	save="gui",\
32	anomaly=False,\
33	var2=None,\
34	ndiv=10,\
35	mult=1.,\
36	zetitle=["fill"],\
37	slon=None,\
38	slat=None,\
39	svert=None,\
40	stime=None,\
41	outputname=None,\
42	resolution=200,\
43	ope=None,\
44	fileref=None,\
45	minop=0.,\
46	maxop=0.,\
47	titleref="fill",\
48	invert_y=False,\
49	xaxis=[None,None],\
50	yaxis=[None,None],\
51	ylog=False,\
52	yintegral=False,\
53	blat=None,\
54	blon=None,\
55	tsat=False,\
56	flagnolow=False,\
57	mrate=None,\
58	mquality=False,\
59	trans=1,\
60	zarea=None,\
61	axtime=None,\
62	redope=None,\
63	seevar=False,\
64	xlab=None,\
65	ylab=None,\
66	lbls=None,\
67	lstyle=None,\
68	cross=None,\
69	streamflag=False):
70
71	####################################################################################################################
72	### Colorbars http://www.scipy.org/Cookbook/Matplotlib/Show_colormaps?action=AttachFile&do=get&target=colormaps3.png
73
74	#################################
75	### Load librairies and functions
76	from netCDF4 import Dataset
77	from myplot import getcoord2d,define_proj,makeplotres,simplinterv,vectorfield,ptitle,latinterv,getproj,wrfinterv,dumpbdy,\
78	fmtvar,definecolorvec,defcolorb,getprefix,putpoints,calculate_bounds,errormess,definesubplot,\
79	zoomset,getcoorddef,getwinddef,whatkindfile,reducefield,bounds,getstralt,getfield,smooth,nolow,\
80	getname,localtime,check_localtime,polarinterv,getsindex,define_axis,determineplot,readslices,bidimfind,getlschar,hole_bounds,\
81	windamplitude,slopeamplitude,deltat0t1
82	from mymath import deg,max,min,mean,get_tsat,writeascii,fig2data,fig2img
83	import matplotlib as mpl
84	from matplotlib.pyplot import contour,contourf,hist, text,subplot, figure, rcParams, savefig, colorbar, pcolor, show, plot, clabel, title, close, legend, xlabel, axis, ylabel, subplots_adjust, axes, clabel
85	from matplotlib.cm import get_cmap
86	#from mpl_toolkits.basemap import cm
87	import numpy as np
88	from numpy.core.defchararray import find
89	from videosink import VideoSink
90	from timestuff import sol2ls
91	import subprocess
92	#from singlet import singlet
93	from itertools import cycle
94	import os
95
96	#########################
97	### PRELIMINARY STUFF ###
98	#########################
99	### we say hello
100	print "********************************************"
101	print "******** WELCOME TO PLANETOPLOT ********"
102	print "********************************************"
103	### we ensure namefiles and var are arrays
104	if not isinstance(namefiles, np.ndarray): namefiles = [namefiles]
105	if not isinstance(var, np.ndarray): var = [var]
106	### we initialize a few variables
107	initime=-1 ; sslon = None ; sslat = None
108	if slon is not None: sslon = np.zeros([1,2])
109	if slat is not None: sslat = np.zeros([1,2])
110	k = 0 ; firstfile = True ; count = 0
111	### we avoid specific cases not yet implemented
112	if mrate is not None and len(var) > 1: errormess("multivar not allowed in movies. should be fixed soon!")
113	### we prepare number of plot fields [zelen] and plot instances [numplot] according to user choices
114	### --> we support multifile and multivar plots : files + vars separated by commas are on the same figure
115	nlon, nlat, nvert, ntime, mapmode, nslices = determineplot(slon, slat, svert, stime)
116	zelen = len(namefiles)*len(var)
117	numplot = zelen*nslices
118	print "********** FILES, SLICES, VARS, TOTAL PLOTS: ", len(namefiles), nslices, len(var), numplot
119	print "********** MAPMODE: ", mapmode
120	### we correct number of plot fields for possible operation (substract, etc...)
121	if ope is not None:
122	if fileref is not None: zelen = zelen + 2
123	elif "var" in ope: zelen = zelen + 1
124	### we define the arrays for plot fields -- which will be placed within multiplot loops
125	all_var = [[]]zelen ; all_var2 = [[]]zelen
126	all_title = [[]]zelen ; all_varname = [[]]zelen ; all_namefile = [[]]zelen ; all_time = [[]]zelen
127	all_windu = [[]]zelen ; all_windv = [[]]zelen
128
129	#############################
130	### LOOP OVER PLOT FIELDS ###
131	#############################
132	for nnn in range(len(namefiles)):
133	for vvv in range(len(var)):
134
135	### we load each NETCDF objects in namefiles
136	namefile = namefiles[nnn]
137	nc = Dataset(namefile)
138	### we explore the variables in the file
139	varinfile = nc.variables.keys()
140	if seevar: print varinfile ; exit()
141	### we define the type of file we have (gcm, meso, etc...)
142	typefile = whatkindfile(nc)
143	if firstfile: typefile0 = typefile
144	elif typefile != typefile0: errormess("Not the same kind of files !", [typefile0, typefile])
145	### we care for input file being 1D simulations
146	if "longitude" in nc.dimensions and "latitude" in nc.dimensions: is1d = len(nc.variables["longitude"][:])*len(nc.variables["latitude"][:])
147	elif "lon" in nc.dimensions and "lat" in nc.dimensions: is1d = len(nc.variables["lon"][:])*len(nc.variables["lat"][:])
148	if typefile in ['gcm','earthgcm'] and is1d == 1: mapmode=0 ; winds=False
149	### we create default vert and time prescriptions if not here in case mapping mode is on (lat/lon maps)
150	if redope is None and mapmode == 1:
151	if svert is None: svert = readslices(str(level)) ; nvert=1
152	if stime is None and mrate is None:
153	stime = readslices(str(0)) ; ntime=1 ## this is a default choice
154	print "WELL... nothing about time axis. I took default: first time reference stored in file."
155	### we get the names of variables to be read. in case only one available, we choose this one.
156	varname=var[vvv]
157	if ((varname not in nc.variables) and not ((typefile in ['meso']) and (varname in ['UV','uv','uvmet','slopexy','SLOPEXY','deltat','DELTAT']))):
158	if len(varinfile) == 1: varname = varinfile[0]
159	else: varname = False
160	### we get the names of wind variables to be read (if any)
161	if winds:
162	[uchar,vchar,metwind] = getwinddef(nc)
163	if uchar == 'not found': winds = False
164	### we tell the user that either no var or no wind is not acceptable
165	if not varname and not winds: errormess("please set at least winds or var",printvar=nc.variables)
166	### we get the coordinates lat/lon to be used
167	[lon2d,lat2d] = getcoorddef(nc)
168	### we get an adapted map projection if none is provided by the user
169	if proj == None: proj = getproj(nc)
170	### we define plot boundaries given projection or user choices
171	if firstfile:
172	if proj in ["npstere","spstere"]: [wlon,wlat] = polarinterv(lon2d,lat2d)
173	elif proj in ["lcc","laea"]: [wlon,wlat] = wrfinterv(lon2d,lat2d)
174	else: [wlon,wlat] = simplinterv(lon2d,lat2d)
175	if zoom: [wlon,wlat] = zoomset(wlon,wlat,zoom)
176	elif zarea is not None: [wlon,wlat] = latinterv(area=zarea)
177
178	##########################################################
179	############ LOAD 4D DIMENSIONS : x, y, z, t #############
180	##########################################################
181	if typefile in ["gcm","earthgcm","ecmwf"]:
182	if slon is not None: sslon = slon
183	if slat is not None: sslat = slat
184	### LAT
185	if "latitude" in nc.variables: lat = nc.variables["latitude"][:]
186	elif "lat" in nc.variables: lat = nc.variables["lat"][:]
187	### LON
188	if "longitude" in nc.variables: lon = nc.variables["longitude"][:]
189	elif "lon" in nc.variables: lon = nc.variables["lon"][:]
190	### ALT
191	if "altitude" in nc.variables: vert = nc.variables["altitude"][:]
192	elif "Alt" in nc.variables: vert = nc.variables["Alt"][:]
193	elif "lev" in nc.variables: vert = nc.variables["lev"][:]
194	else: vert = [0.]
195	### AIRE (to weight means with the area)
196	if "aire" in nc.variables: area = nc.variables["aire"][:,:]
197	else: area = None
198	### TIME
199	if "Time" in nc.variables: time = nc.variables["Time"][:]
200	elif "time" in nc.variables: time = nc.variables["time"][:]
201	elif "time_counter" in nc.variables: time = nc.variables["time_counter"][:]/86400. #### time counter cinverstion from s-> days
202	else: time = [0.] #errormess("no time axis found.")
203	if axtime in ["ls"]:
204	print "converting to Ls ..."
205	for iii in range(len(time)):
206	time[iii] = sol2ls(time[iii]) # to use with timestuff
207	if iii > 0:
208	while abs(time[iii]-time[iii-1]) > 300:
209	time[iii] = time[iii]+360
210	# for 1D plots (no need for longitude computation):
211	if axtime in ["lt"]:
212	if initime == -1: initime=input("Please type initial local time:")
213	time = (initime+time*24)%24
214	print "LOCAL TIMES.... ", time
215	elif typefile in ['meso','geo']:
216	area = None ## not active for the moment
217	###### STUFF TO GET THE CORRECT LAT/LON FROM MESOSCALE FILES WITH 2D LAT/LON ARRAYS
218	###### principle: calculate correct indices then repopulate slon and slat
219	if slon is not None or slat is not None:
220	if firstfile and save == 'png' and typefile == 'meso' and "HGT" in varinfile and display: iwantawhereplot = nc #show a topo map with a cross on the chosen point
221	else: iwantawhereplot = None #do not show anything, just select indices
222	numlon = 1 ; numlat = 1
223	if slon is not None: numlon = slon.shape[1]
224	if slat is not None: numlat = slat.shape[1]
225	indices = np.ones([numlon,numlat,2]) ; vlon = None ; vlat = None
226	for iii in range(numlon):
227	for jjj in range(numlat):
228	if slon is not None: vlon = slon[0][iii] ### note: slon[:][0] does not work
229	if slat is not None: vlat = slat[0][jjj] ### note: slon[:][0] does not work
230	indices[iii,jjj,:] = bidimfind(lon2d,lat2d,vlon,vlat,file=iwantawhereplot)
231	lonp,latp = ( lon2d[indices[iii,jjj,0],indices[iii,jjj,1]] , lat2d[indices[iii,jjj,0],indices[iii,jjj,1]] )
232	### possible bug here if several --lat
233	for iii in range(numlon):
234	for jjj in range(numlat):
235	if slon is not None: sslon[0][iii] = indices[iii,0,1] #...this is idx
236	if slat is not None: sslat[0][jjj] = indices[0,jjj,0] #...this is idy
237	lonp,latp = ( lon2d[indices[0,0,0],indices[0,0,1]] , lat2d[indices[0,0,0],indices[0,0,1]] )
238	######
239	if typefile in ['meso'] and mapmode == 1: lon2d = dumpbdy(lon2d,6) ; lat2d = dumpbdy(lat2d,6) ### important to do that now and not before
240	######
241	if varname in ['PHTOT','W']: vertdim='BOTTOM-TOP_PATCH_END_STAG'
242	else: vertdim='BOTTOM-TOP_PATCH_END_UNSTAG'
243	if (var2 is not None and var2 not in ['PHTOT','W']): dumped_vert_stag=True ; vertdim='BOTTOM-TOP_PATCH_END_UNSTAG'
244	else: dumped_vert_stag=False
245	if varname in ['V']: latdim='SOUTH-NORTH_PATCH_END_STAG'
246	else: latdim='SOUTH-NORTH_PATCH_END_UNSTAG'
247	if varname in ['U']: londim='WEST-EAST_PATCH_END_STAG'
248	else: londim='WEST-EAST_PATCH_END_UNSTAG'
249	lon = np.arange(0,getattr(nc,londim),1) ; lat = np.arange(0,getattr(nc,latdim),1)
250	###
251	if axtime in ["ls","sol"]:
252	lstab, soltab, lttab = getlschar ( namefile, getaxis = True )
253	if axtime == "ls": time = lstab
254	elif axtime == "sol": time = soltab
255	else:
256	if ope in ["cat"] and nnn > 0: count = time[-1] + 1 ## so that a cat is possible with simple subscripts
257	else: count = 0
258	if "Times" in nc.dimensions: time = count + np.arange(0,len(nc.dimensions["Times"]),1)
259	elif "Time" in nc.dimensions: time = count + np.arange(0,len(nc.dimensions["Time"]),1)
260	else: time = count + np.arange(0,1,1)
261	if axtime in ["lt"]:
262	ftime = np.zeros(len(time))
263	for i in range(len(time)):
264	ftime[i] = localtime ( interv[0]+time[i]interv[1], 0.5(wlon[0]+wlon[1]) )
265	time=ftime
266	time=check_localtime(time)
267	print "LOCAL TIMES.... ", time
268
269	###
270	if typefile in ['geo']: vert = [0.] ; stime = readslices(str(0))
271	else:
272	if vertmode is None: vertmode=0
273	if vertmode == 0: vert = np.arange(0,getattr(nc,vertdim),1)
274	elif vertmode == -1: vert = nc.variables["PHTOT"][0,:,0,0]/3.72 ; vert = np.array(vert[0:len(vert)-1]) #; print vert
275	elif vertmode == 1 or vertmode == 2: vert = nc.variables["vert"][:] ## pressure in Pa
276	else: vert = nc.variables["vert"][:]/1000. ## altitude in km
277	#if firstfile:
278	# lat0 = lat
279	#elif len(lat0) != len(lat):
280	# errormess("Not the same latitude lengths !", [len(lat0), len(lat)])
281	#elif sum((lat == lat0) == False) != 0:
282	# errormess("Not the same latitudes !", [lat,lat0])
283	## Faire d'autre checks sur les compatibilites entre fichiers!!
284	##########################################################
285	##########################################################
286	##########################################################
287
288	all_varname[k] = varname
289	all_namefile[k] = namefile
290	all_time[k] = time
291	if var2:
292	all_var2[k] = getfield(nc,var2)
293	if ((var2 in ['slopexy','SLOPEXY']) and (typefile in ['meso']) and (var2 not in nc.variables)): all_var2[k] = slopeamplitude(nc)
294	if winds: all_windu[k] = getfield(nc,uchar) ; all_windv[k] = getfield(nc,vchar)
295	#####################
296	##### GETFIELDS #####
297	#####################
298	##### SPECIFIC CASES
299	##### 1. saturation temperature
300	if varname in ["temp","t","T_nadir_nit","T_nadir_day","temp_day","temp_night"] and tsat:
301	tt=getfield(nc,varname) ; print "computing Tsat-T, I ASSUME Z-AXIS IS PRESSURE"
302	if type(tt).__name__=='MaskedArray': tt.set_fill_value([np.NaN]) ; tinput=tt.filled()
303	else: tinput=tt
304	all_var[k]=get_tsat(vert,tinput,zlon=lon,zlat=lat,zalt=vert,ztime=time)
305	##### 2. wind amplitude
306	elif ((varname in ['UV','uv','uvmet']) and (typefile in ['meso']) and (varname not in nc.variables)):
307	all_var[k]=windamplitude(nc)
308	elif ((varname in ['slopexy','SLOPEXY']) and (typefile in ['meso']) and (varname not in nc.variables)):
309	all_var[k]=slopeamplitude(nc)
310	elif ((varname in ['DELTAT','deltat']) and (typefile in ['meso']) and (varname not in nc.variables)):
311	all_var[k]=deltat0t1(nc)
312	else:
313	##### GENERAL STUFF HERE
314	all_var[k] = getfield(nc,varname)
315	print "**** GOT SUBDATA:",k," NAMEFILE:",namefile," VAR:",varname, var2 ; k += 1 ; firstfile = False
316	#### End of for namefile in namefiles
317
318	##################################
319	### Operation on files
320	if ope is not None:
321	print "********** OPERATION: ",ope
322	if "var" not in ope:
323	if len(var) > 1: errormess("for this operation... please set only one var !")
324	if ope in ["-","+","-%"]:
325	if fileref is not None:
326	ncref = Dataset(fileref)
327	if ((all_varname[k-1] in ['UV','uv','uvmet']) and (typefile in ['meso']) and (all_varname[k-1] not in ncref.variables)):
328	all_var[k] = windamplitude(ncref)
329	elif ((all_varname[k-1] in ['slopexy','SLOPEXY']) and (typefile in ['meso']) and (all_varname[k-1] not in ncref.variables)):
330	all_var[k] = slopeamplitude(ncref)
331	elif ((all_varname[k-1] in ['DELTAT','deltat']) and (typefile in ['meso']) and (all_varname[k-1] not in ncref.variables)):
332	all_var[k]=deltat0t1(ncref)
333	else:
334	all_var[k] = getfield(ncref,all_varname[k-1])
335	all_varname[k] = all_varname[k-1] ; all_time[k] = all_time[k-1] ; all_namefile[k] = all_namefile[k-1] ; all_var2[k] = all_var2[k-1]
336	if winds: all_windu[k] = getfield(ncref,uchar) ; all_windv[k] = getfield(ncref,vchar)
337	else: errormess("fileref is missing!")
338	if ope == "-": all_var[k+1]= all_var[k-1] - all_var[k]
339	elif ope == "+": all_var[k+1]= all_var[k-1] + all_var[k]
340	elif ope == "-%":
341	masked = np.ma.masked_where(all_var[k] == 0,all_var[k])
342	masked.set_fill_value([np.NaN])
343	all_var[k+1]= 100.*(all_var[k-1] - masked)/masked
344	all_varname[k+1] = all_varname[k] ; all_time[k+1] = all_time[k] ; all_namefile[k+1] = all_namefile[k] ; all_var2[k+1] = all_var2[k] ; numplot = numplot+2
345	if winds: all_windu[k+1] = all_windu[k-1]-all_windu[k] ; all_windv[k+1] = all_windv[k-1] - all_windv[k]
346	elif ope in ["cat"]:
347	tabtime = all_time[0];tab = all_var[0];k = 1
348	if var2: tab2 = all_var2[0]
349	while k != len(namefiles) and len(all_time[k]) != 0:
350	if var2: tab2 = np.append(tab2,all_var2[k],axis=0)
351	tabtime = np.append(tabtime,all_time[k]) ; tab = np.append(tab,all_var[k],axis=0) ; k += 1
352	all_time[0] = np.array(tabtime) ; all_var[0] = np.array(tab) ; numplot = 1
353	if var2: all_var2[0] = np.array(tab2)
354	else: errormess(ope+" : non-implemented operation. Check pp.py --help")
355	else:
356	if len(namefiles) > 1: errormess("for this operation... please set only one file !")
357	if len(var) > 2: errormess("not sure this works for more than 2 vars... please check.")
358	if ope in ["div_var"]: all_var[k] = all_var[k-2] / all_var[k-1] ; insert = '_div_'
359	elif ope in ["mul_var"]: all_var[k] = all_var[k-2] * all_var[k-1] ; insert = '_mul_'
360	elif ope in ["add_var"]: all_var[k] = all_var[k-2] + all_var[k-1] ; insert = '_add_'
361	elif ope in ["sub_var"]: all_var[k] = all_var[k-2] - all_var[k-1] ; insert = '_sub_'
362	else: errormess(ope+" : non-implemented operation. Check pp.py --help")
363	numplot = numplot + 1 ; all_time[k] = all_time[k-1] ; all_namefile[k] = all_namefile[k-1]
364	all_varname[k] = all_varname[k-2] + insert + all_varname[k-1]
365	##################################
366	### Open a figure and set subplots
367	fig = figure()
368	subv,subh = definesubplot( numplot, fig )
369	if ope in ['-','-%']: subv,subh = 2,2
370
371	#################################
372	### Time loop for plotting device
373	nplot = 1 ; error = False
374	if lstyle is not None: linecycler = cycle(lstyle)
375	else: linecycler = cycle(["-","--","-.",":"])
376	print "********************************************"
377	while error is False:
378
379	print "********** NPLOT", nplot
380	if nplot > numplot: break
381
382	####################################################################
383	## get all indexes to be taken into account for this subplot and then reduce field
384	## We plot 1) all lon slices 2) all lat slices 3) all vert slices 4) all time slices and then go to the next slice
385	indexlon = getsindex(sslon,(nplot-1)%nlon,lon)
386	indexlat = getsindex(sslat,((nplot-1)//nlon)%nlat,lat)
387	indexvert = getsindex(svert,((nplot-1)//(nlon*nlat))%nvert,vert)
388	if ope is not None:
389	if fileref is not None: index_f = ((nplot-1)//(nlonnlatnvert*ntime))%(len(namefiles)+2) ## OK only 1 var, see test in the beginning
390	elif "var" in ope: index_f = ((nplot-1)//(nlonnlatnvert*ntime))%(len(var)+1) ## OK only 1 file, see test in the beginning
391	elif "cat" in ope: index_f = 0
392	else: yeah = len(namefiles)len(var) ; index_f = ((nplot-1)//(nlonnlatnvertntime))%yeah
393	time = all_time[index_f]
394	if mrate is not None: indextime = None
395	else: indextime = getsindex(stime,((nplot-1)//(nlonnlatnvert))%ntime,time)
396	ltst = None
397	if typefile in ['meso'] and indextime is not None: ltst = localtime ( interv[0]+indextimeinterv[1], 0.5(wlon[0]+wlon[1]) )
398	print "********** INDEX LON:",indexlon," LAT:",indexlat," VERT:",indexvert," TIME:",indextime
399	##var = nc.variables["phisinit"][:,:]
400	##contourf(np.transpose(var),30,cmap = get_cmap(name="Greys_r") ) ; axis('off') ; plot(indexlat,indexlon,'mx',mew=4.0,ms=20.0)
401	##show()
402	##exit()
403	#truc = True
404	#truc = False
405	#if truc: indexvert = None
406	####################################################################
407	########## REDUCE FIELDS
408	####################################################################
409	error = False
410	varname = all_varname[index_f]
411	if varname: ### what is shaded.
412	what_I_plot, error = reducefield( all_var[index_f], d4=indextime, d1=indexlon, d2=indexlat, d3=indexvert, \
413	yint=yintegral, alt=vert, anomaly=anomaly, redope=redope, mesharea=area )
414	if mult != 2718.: what_I_plot = what_I_plot*mult
415	else: what_I_plot = np.log10(what_I_plot) ; print "log plot"
416
417	if var2: ### what is contoured.
418	what_I_plot_contour, error = reducefield( all_var2[index_f], d4=indextime, d1=indexlon, d2=indexlat , d3=indexvert, \
419	yint=yintegral, alt=vert )
420	if winds: ### what is plot as vectors.
421	vecx, error = reducefield( all_windu[index_f], d4=indextime, d3=indexvert, yint=yintegral, alt=vert)
422	vecy, error = reducefield( all_windv[index_f], d4=indextime, d3=indexvert, yint=yintegral, alt=vert)
423	if varname in [uchar,vchar]: what_I_plot = np.sqrt( np.square(vecx) + np.square(vecy) ) ; varname = "wind"
424
425	#####################################################################
426	#if truc:
427	# nx = what_I_plot.shape[2] ; ny = what_I_plot.shape[1] ; nz = what_I_plot.shape[0]
428	# for k in range(nz): print k,' over ',nz ; what_I_plot[k,:,:] = what_I_plot[k,:,:] / smooth(what_I_plot[k,:,:],12)
429	# for iii in range(nx):
430	# for jjj in range(ny):
431	# deviation = what_I_plot[:,jjj,iii] ; mx = max(deviation) ; mn = min(deviation)
432	# if iii > 6 and iii < nx-6 and jjj > 6 and jjj < ny-6: what_I_plot[0,jjj,iii],rel = singlet(deviation,vert/1000.) ### z must be in km
433	# else: what_I_plot[0,jjj,iii] = 0.
434	# if np.abs(what_I_plot[0,jjj,iii]) > 1.5:
435	# print iii,jjj,what_I_plot[0,jjj,iii],int(abs(1.-mx)100.),int(abs(1.-mn)100.)
436	# plot(rel)
437	# show()
438	# anomaly = True ### pour avoir les bons reglages plots
439	# what_I_plot = what_I_plot[0,:,:]
440	#####################################################################
441
442	####################################################################
443	### General plot settings
444	changesubplot = (numplot > 1) and (len(what_I_plot.shape) != 1) ## default for 1D plots: superimposed. to be reworked for better flexibility.
445	if changesubplot: subplot(subv,subh,nplot) #; subplots_adjust(wspace=0,hspace=0)
446	####################################################################
447	if error:
448	errormess("There is an error in reducing field !")
449	else:
450	ticks = ndiv + 1
451	fvar = varname
452	if anomaly: fvar = 'anomaly'
453	###
454	if mapmode == 0: ### could this be moved inside imov loop ?
455	itime=indextime
456	if len(what_I_plot.shape) == 3: itime=[0]
457	m = None ; x = None ; y = None
458	latyeah = lat ; lonyeah = lon
459	if typefile in ['meso']:
460	# now that the section is determined we can set the real lat
461	# ... or for now, a temptative one.
462	if slon is not None: latyeah = lat2d[:,0]
463	if slat is not None: lonyeah = lon2d[0,:]
464	what_I_plot, x, y = define_axis(lonyeah,latyeah,vert,time,indexlon,indexlat,indexvert,\
465	itime,what_I_plot, len(all_var[index_f].shape),vertmode)
466	###
467	if (fileref is not None) and (index_f == numplot-1): zevmin, zevmax = calculate_bounds(what_I_plot,vmin=minop,vmax=maxop)
468	else: zevmin, zevmax = calculate_bounds(what_I_plot,vmin=vmin,vmax=vmax)
469	if (fileref is not None) and (index_f == numplot-1): colorb = "RdBu_r"
470	if colorb in ["def","nobar","onebar"]: palette = get_cmap(name=defcolorb(fvar.upper()))
471	else: palette = get_cmap(name=colorb)
472	#palette = cm.GMT_split
473	##### 1. ELIMINATE 0D or >3D CASES
474	if len(what_I_plot.shape) == 0:
475	print "VALUE VALUE VALUE VALUE ::: ",what_I_plot
476	save = 'donothing'
477	elif len(what_I_plot.shape) >= 4:
478	print "WARNING!!! ",len(what_I_plot.shape),"-D PLOT NOT SUPPORTED !!! dimensions: ",what_I_plot.shape
479	errormess("Are you sure you did not forget to prescribe a dimension ?")
480	##### 2. HANDLE simple 1D/2D field and movies of 1D/2D fields
481	else:
482	if mrate is not None: iend=len(time)-1
483	else: iend=0
484	imov = 0
485	if len(what_I_plot.shape) == 3:
486	if var2: which = "contour" ## have to start with contours rather than shading
487	else: which = "regular"
488	if mrate is None: errormess("3D field. Use --rate RATE for movie or specify --time TIME. Exit.")
489	elif len(what_I_plot.shape) == 2:
490	if var2: which = "contour" ## have to start with contours rather than shading
491	else: which = "regular"
492	if mrate is not None: which = "unidim"
493	elif len(what_I_plot.shape) == 1:
494	which = "unidim"
495	if what_I_plot.shape[-1] == 1: print "VALUE VALUE VALUE VALUE ::: ", what_I_plot[0] ; save = 'donothing'
496	##### IMOV LOOP #### IMOV LOOP
497	while imov <= iend:
498	print "-> frame ",imov+1, which
499	if which == "regular":
500	if mrate is None: what_I_plot_frame = what_I_plot
501	else: what_I_plot_frame = what_I_plot[imov,:,:]
502	if winds:
503	if mrate is None: vecx_frame = vecx ; vecy_frame = vecy
504	else: vecx_frame = vecx[imov,:,:] ; vecy_frame = vecy[imov,:,:]
505	elif which == "contour":
506	if mrate is None or what_I_plot_contour.ndim < 3: what_I_plot_frame = what_I_plot_contour
507	else: what_I_plot_frame = what_I_plot_contour[imov,:,:]
508	elif which == "unidim":
509	if mrate is None: what_I_plot_frame = what_I_plot
510	else: what_I_plot_frame = what_I_plot[:,imov] ## because swapaxes
511	#if mrate is not None:
512	if mapmode == 1:
513	m = define_proj(proj,wlon,wlat,back=back,blat=blat,blon=blon) ## this is dirty, defined above but out of imov loop
514	x, y = m(lon2d, lat2d) ## this is dirty, defined above but out of imov loop
515	if typefile in ['meso'] and mapmode == 1: what_I_plot_frame = dumpbdy(what_I_plot_frame,6,condition=True)
516	# if typefile in ['mesoideal']: what_I_plot_frame = dumpbdy(what_I_plot_frame,0,stag='W',condition=dumped_vert_stag)
517
518	if which == "unidim":
519	if lbls is not None: lbl=lbls[nplot-1]
520	else:
521	lbl = ""
522	if indexlat is not None: lbl = lbl + " ix" + str(indexlat[0])
523	if indexlon is not None: lbl = lbl + " iy" + str(indexlon[0])
524	if indexvert is not None: lbl = lbl + " iz" + str(indexvert[0])
525	if indextime is not None: lbl = lbl + " it" + str(indextime[0])
526	if lbl == "": lbl = all_namefile[index_f]
527
528	if mrate is not None: x = y ## because swapaxes...
529	#what_I_plot_frame = np.diff(what_I_plot_frame, n=1) ; x = x[1:]
530
531	zeline = next(linecycler) ## "-" for simple lines
532	if tile: zemarker = 'x'
533	else: zemarker = None
534	this_is_a_regular_plot = (indexvert is not None) or (indextime is None) or (indexlat is None) or (indexlon is None)
535	if this_is_a_regular_plot: plot(x,what_I_plot_frame,zeline,label=lbl,marker=zemarker) ## vertical profile
536	else: plot(what_I_plot_frame,x,zeline,label=lbl,marker=zemarker) ## regular plot
537	if nplot > 1: legend(loc='best')
538	if indextime is None and axtime is not None and xlab is None: xlabel(axtime.upper()) ## define the right label
539	if save == 'txt': writeascii(np.transpose([x,np.transpose(what_I_plot)]),'profile'+str(nplot*1000+imov)+'.txt')
540
541	elif which == "regular":
542
543	# plot stream lines if there is a stream file and a vert/lat slice. Might not work with movies ??
544	if streamflag and sslat is None and svert is None:
545	streamfile = all_namefile[index_f].replace('.nc','_stream.nc')
546	teststream = os.path.exists(streamfile)
547	if teststream:
548	print 'INFO: Using stream file',streamfile, 'for stream lines'
549	ncstream = Dataset(streamfile)
550	psi = getfield(ncstream,'psi')
551	psi = psi[0,:,:,0] # time and longitude are dummy dimensions
552	if psi.shape[1] != len(x) or psi.shape[0] != len(y):
553	errormess('stream file does not fit! Dimensions: '+str(psi.shape)+' '+str(x.shape)+' '+str(y.shape))
554	zelevels = np.arange(-1.e10,1.e10,1.e9)
555	zemin = np.min(abs(zelevels))
556	zemax = np.max(abs(zelevels))
557	zewidth = (abs(zelevels)-zemin)*(5.- 0.5)/(zemax - zemin) + 0.5 # linewidth ranges from 5 to 0.5
558	cs = contour( x,y,psi, zelevels, colors='k', linewidths = zewidth)
559	clabel(cs, inline=True, fontsize = 4.*rcParams['font.size']/5., fmt="%1.1e")
560	else:
561	print 'WARNING: STREAM FILE',streamfile, 'DOES NOT EXIST !'
562
563	if hole: what_I_plot_frame = hole_bounds(what_I_plot_frame,zevmin,zevmax)
564	else: what_I_plot_frame = bounds(what_I_plot_frame,zevmin,zevmax)
565	if flagnolow: what_I_plot_frame = nolow(what_I_plot_frame)
566	if not tile:
567	#zelevels = np.linspace(zevmin(1. + 1.e-7),zevmax(1. - 1.e-7)) #,num=20)
568	zelevels = np.linspace(zevmin,zevmax,num=ticks)
569	#what_I_plot_frame = smooth(what_I_plot_frame,100)
570	if mapmode == 1: m.contourf( x, y, what_I_plot_frame, zelevels, cmap = palette, alpha=trans)
571	elif mapmode == 0: contourf( x, y, what_I_plot_frame, zelevels, cmap = palette, alpha=trans)
572	if cross is not None and mapmode == 1:
573	idx,idy=m(cross[0][0],cross[0][1])
574	mpl.pyplot.plot([idx],[idy],'+k',mew=0.5,ms=18)
575	else:
576	if mapmode == 1: m.pcolor( x, y, what_I_plot_frame, cmap = palette, vmin=zevmin, vmax=zevmax, alpha=trans)
577	elif mapmode == 0: pcolor( x, y, what_I_plot_frame, cmap = palette, vmin=zevmin, vmax=zevmax, alpha=trans)
578
579
580	if colorb not in ['nobar','onebar']:
581	if (fileref is not None) and (index_f == numplot-1): daformat = "%.3f"
582	elif mult != 1: daformat = "%.1f"
583	else: daformat = fmtvar(fvar.upper())
584	#if proj in ['moll','cyl']: zeorientation="horizontal" ; zepad = 0.05
585	if proj in ['moll']: zeorientation="horizontal" ; zepad = 0.05
586	else: zeorientation="vertical" ; zepad = 0.03
587	zecb = colorbar( fraction=0.05,pad=zepad,format=daformat,orientation=zeorientation,\
588	ticks=np.linspace(zevmin,zevmax,num=min([ticks/2+1,21])),extend='neither',spacing='proportional' )
589	if zeorientation == "horizontal" and zetitle[0] != "fill": zecb.ax.set_xlabel(zetitle[index_f]) ; zetitle[index_f]=""
590	if winds:
591	if typefile in ['meso']:
592	[vecx_frame,vecy_frame] = [dumpbdy(vecx_frame,6,stag=uchar,condition=True), dumpbdy(vecy_frame,6,stag=vchar,condition=True)]
593	key = True
594	if fvar in ['UV','uv','uvmet']: key = False
595	elif typefile in ['gcm']:
596	key = False
597	if metwind and mapmode == 1: [vecx_frame,vecy_frame] = m.rotate_vector(vecx_frame, vecy_frame, lon2d, lat2d)
598	if var: colorvec = definecolorvec(colorb)
599	else: colorvec = definecolorvec(back)
600	vectorfield(vecx_frame, vecy_frame, x, y, stride=stride, csmooth=2,\
601	#scale=15., factor=300., color=colorvec, key=key)
602	scale=20., factor=250., color=colorvec, key=key)
603	#200. ## or csmooth=stride
604	if ope == '-' and nplot == numplot: # this should work as long as ope is '-' guarantees 3 plots for 4 panels without contour
605	subplot(subv,subh,nplot+1)
606	rcParams["legend.fontsize"] = 'xx-large'
607	if indexlat is None:
608	latmin = -50.; latmax = 50. # latitude range for histogram of difference
609	zeindexlat = (lat<latmax)*(lat>latmin)
610	# this follows the define_axis logic in myplot.py:
611	if indextime is None or indexlon is None: what_I_plot_frame = what_I_plot_frame[zeindexlat,:]
612	else: what_I_plot_frame = what_I_plot_frame[:,zeindexlat]
613	toplot = np.ravel(what_I_plot_frame[np.isnan(what_I_plot_frame)==False])
614	zebins = np.linspace(zevmin,zevmax,num=30)
615	hist(toplot,bins=zebins,histtype='step',linewidth=2,color='k',normed=True)
616	zestd = np.std(toplot);zemean = np.mean(toplot)
617	zebins = np.linspace(zevmin,zevmax,num=300)
618	zegauss = (1./(zestd * np.sqrt(2 * np.pi)) * np.exp( - (zebins - zemean)*2 / (2 zestd**2) ) )
619	plot(zebins, zegauss, linewidth=1, color='r',label="mean: "+str(zemean)[0:5]+"\nstd: "+str(zestd)[0:5])
620	legend(loc=0,frameon=False)
621	title("Histogram fig(1) "+ope+" fig(2)")
622	subplot(subv,subh,nplot) # go back to last plot for title of contour difference
623
624	elif which == "contour":
625	zevminc, zevmaxc = calculate_bounds(what_I_plot_frame, vmin=min(what_I_plot_frame), vmax=max(what_I_plot_frame))
626	zelevels = np.linspace(zevminc,zevmaxc,ticks/2) #20)
627	if var2 == 'HGT': zelevels = np.arange(-10000.,30000.,1000.)
628	elif var2 == 'tpot': zelevels = np.arange(270,370,5)
629	elif var2 == 'tk': zelevels = np.arange(150,250,5)
630	if mapmode == 0:
631	what_I_plot_frame, x, y = define_axis( lonyeah,latyeah,vert,time,indexlon,indexlat,indexvert,\
632	itime,what_I_plot_frame, len(all_var2[index_f].shape),vertmode )
633	## is this needed? only if len(all_var2[index_f].shape) != len(all_var[index_f].shape)
634	cs = contour( x,y,what_I_plot_frame, zelevels, colors='k', linewidths = 0.33)#, alpha=0.5, linestyles='solid')
635	clabel(cs, inline=1, fontsize = 4.*rcParams['font.size']/5., fmt=fmtvar(var2.upper()))
636	elif mapmode == 1: cs = m.contour( x,y,what_I_plot_frame, zelevels, colors='k', linewidths = 0.33)#, alpha=0.5, linestyles='solid')
637	if which in ["regular","unidim"]:
638
639	if nplot > 1 and which == "unidim":
640	pass ## because we superimpose nplot instances
641	else:
642	# Axis directives for movie frames [including the first one).
643	zxmin, zxmax = xaxis ; zymin, zymax = yaxis
644	if zxmin is not None: mpl.pyplot.xlim(xmin=zxmin)
645	if zxmax is not None: mpl.pyplot.xlim(xmax=zxmax)
646	if zymin is not None: mpl.pyplot.ylim(ymin=zymin)
647	if zymax is not None: mpl.pyplot.ylim(ymax=zymax)
648	if ylog: mpl.pyplot.semilogy()
649	if invert_y: ax = mpl.pyplot.gca() ; ax.set_ylim(ax.get_ylim()[::-1])
650	if xlab is not None: xlabel(xlab)
651	if ylab is not None: ylabel(ylab)
652
653	if mrate is not None:
654	### THIS IS A MENCODER MOVIE
655	if mrate > 0:
656	figframe=mpl.pyplot.gcf()
657	if mquality: figframe.set_dpi(600.)
658	else: figframe.set_dpi(200.)
659	mframe=fig2img(figframe)
660	if imov == 0:
661	moviename='movie' ;W,H = figframe.canvas.get_width_height()
662	video = VideoSink((H,W), moviename, rate=mrate, byteorder="rgba")
663	video.run(mframe) ; close()
664	if imov == iend: video.close()
665	### THIS IS A WEBPAGE MOVIE
666	else:
667	nameframe = "image"+str(1000+imov)
668	makeplotres(nameframe,res=100.,disp=False) ; close()
669	if imov == 0: myfile = open("zepics", 'w')
670	myfile.write("modImages["+str(imov)+"] = '"+nameframe+"_100.png';"+ '\n')
671	if imov == iend:
672	myfile.write("first_image = 0;"+ '\n')
673	myfile.write("last_image = "+str(iend)+";"+ '\n')
674	myfile.close()
675	if var2 and which == "regular": which = "contour"
676	imov = imov+1
677	elif which == "contour":
678	which = "regular"
679
680	### Next subplot
681	zevarname = varname
682	if redope is not None: zevarname = zevarname + "_" + redope
683	basename = getname(var=zevarname,var2=var2,winds=winds,anomaly=anomaly)
684	if len(what_I_plot.shape) > 3:
685	basename = basename + getstralt(nc,level)
686	if mrate is not None: basename = "movie_" + basename
687	if typefile in ['meso']:
688	if sslon is not None: basename = basename + "_lon_" + str(int(round(lonp)))
689	if sslat is not None: basename = basename + "_lat_" + str(int(round(latp)))
690	plottitle = basename
691	### dans le nouveau systeme time=ls,sol,lt cette ligne pourrait ne servir a rien (ou deplacer au dessus)
692	if addchar and indextime is not None: [addchar,gogol,gogol2] = getlschar ( all_namefile[index_f] ) ; plottitle = plottitle + addchar
693	### en fait redope is None doit etre remplace par : n'est ni maxt ni mint
694	if redope is None and ltst is not None and ( (mapmode == 0) or (proj in ["lcc","laea","merc","nsper"]) ): plottitle = plottitle + "_LT" + str(ltst)
695	else:
696	if fileref is not None:
697	if index_f is numplot-1: plottitle = basename+' '+"fig(1) "+ope+" fig(2)"
698	elif index_f is numplot-2: plottitle = basename+' '+fileref
699	else: plottitle = basename+' '+all_namefile[index_f]
700	else: plottitle = basename+' '+all_namefile[index_f]
701	if mult != 1: plottitle = '{:.0e}'.format(mult) + "*" + plottitle
702	if zetitle[0] != "fill":
703	if index_f < len(zetitle): plottitle = zetitle[index_f]
704	else: plottitle = zetitle[0]
705	if titleref is "fill": titleref=zetitle[index_f]
706	if fileref is not None:
707	if index_f is numplot-2: plottitle = titleref
708	if index_f is numplot-1: plottitle = "fig(1) "+ope+" fig(2)"
709	# if indexlon is not None: plottitle = plottitle + " lon: " + str(min(lon[indexlon])) +" "+ str(max(lon[indexlon]))
710	# if indexlat is not None: plottitle = plottitle + " lat: " + str(min(lat[indexlat])) +" "+ str(max(lat[indexlat]))
711	# if indexvert is not None: plottitle = plottitle + " vert: " + str(min(vert[indexvert])) +" "+ str(max(vert[indexvert]))
712	# if indextime is not None: plottitle = plottitle + " time: " + str(min(time[indextime])) +" "+ str(max(time[indextime]))
713	if colorb != "onebar": title( plottitle )
714	if nplot >= numplot: error = True
715	nplot += 1
716
717	if colorb == "onebar":
718	cax = axes([0.1, 0.2, 0.8, 0.03]) # a ameliorer
719	zecb = colorbar(cax=cax, orientation="horizontal", format=fmtvar(fvar.upper()),\
720	ticks=np.linspace(zevmin,zevmax,num=min([ticks/2+1,21])),extend='neither',spacing='proportional')
721	if zetitle[0] != "fill": zecb.ax.set_xlabel(zetitle[index_f]) ; zetitle[index_f]=""
722
723
724	##########################################################################
725	### Save the figure in a file in the data folder or an user-defined folder
726	if outputname is None:
727	if typefile in ['meso']: prefix = getprefix(nc)
728	elif typefile in ['gcm']: prefix = 'LMD_GCM_'
729	else: prefix = ''
730	###
731	zeplot = prefix + basename
732	if addchar: zeplot = zeplot + addchar
733	if numplot <= 0: zeplot = zeplot + "_LT"+str(abs(numplot))
734	###
735	if not target: zeplot = namefile[0:find(namefile,'wrfout')] + zeplot
736	else: zeplot = target + "/" + zeplot
737	###
738	else:
739	zeplot=outputname
740
741	if mrate is None:
742	pad_inches_value = 0.35
743	print "********** SAVE ", save
744	if save == 'png':
745	if display: makeplotres(zeplot,res=100.,pad_inches_value=pad_inches_value) #,erase=True) ## a miniature
746	makeplotres(zeplot,res=resolution,pad_inches_value=pad_inches_value,disp=False)
747	elif save in ['eps','svg','pdf']: makeplotres(zeplot,pad_inches_value=pad_inches_value,disp=False,ext=save)
748	elif save == 'gui': show()
749	elif save == 'donothing': pass
750	elif save == 'txt': print "Saved results in txt file."
751	else:
752	print "INFO: save mode not supported. using gui instead."
753	show()
754
755	###################################
756	#### Getting more out of this video -- PROBLEMS WITH CREATED VIDEOS
757	#
758	#if mrate is not None:
759	# print "Re-encoding movie.. first pass"
760	# video.first_pass(filename=moviename,quality=mquality,rate=mrate)
761	# print "Re-encoding movie.. second pass"
762	# video.second_pass(filename=moviename,quality=mquality,rate=mrate)
763
764	###############
765	### Now the end
766	return zeplot

Note: See TracBrowser for help on using the repository browser.

Download in other formats: