Context Navigation

makemeso @ 421

Last change on this file since 421 was 421, checked in by acolaitis, 13 years ago
## deposition.F: corrected a bug with z0, replaced with z0(ngrid) with the correct call to surfdat.h ## makemeso: corrected syntax of call to compile to make sure that there are no conflicts with other instances of compile in the environment of the user.
Property svn:executable set to ``*
File size: 33.1 KB

Line
1	#! /bin/bash
2
3
4	##################################
5	# makemeso allows you to compile #
6	# WRF with modified LMD physics #
7	##################################
8
9	##############################
10	# Author: A. Spiga #
11	# New version : October 2008 #
12	# Last update : January 2009 #
13	# November 09 #
14	# January 11 #
15	##############################
16
17	###############################
18	#### Type makemeso -h for help
19	###############################
20
21
22
23	##############################################################################################
24	##############################################################################################
25	##############################################################################################
26	##############################################################################################
27
28	donotcompile=0
29	donotallow=0
30	config=''
31	donotcompilephys=0
32	justphys=0
33	debug=0
34	fresh_start=0
35	phys=""
36	scenario=""
37	while getopts "drc:njhgpfs:x" options; do
38	case $options in
39	d ) donotcompile=1;; ## just to check the compile folder
40	r ) donotallow=1;; ## allow only known config (useful with 'makemeso < last')
41	c ) config="${OPTARG}";; ## idealized cases
42	n ) donotcompilephys=1;; ## do not recompile physics
43	j ) justphys=1;; ## just compile LMD physics
44	g ) debug=1;; ## debug mode
45	p ) phys="newphys_";; ## with new physics
46	f ) fresh_start=1;; ## a fresh start
47	s ) scenario="${OPTARG}";; ## a specific scenario, you need a corresponding "mars_lmd_..."
48	x ) donotcompile=1;phys="nophys_";donotcompilephys=1;; ## a case with no LMD physics included
49	h ) echo "
50	# Use:
51	#
52	# makemeso ## basic use (real-case configuration)
53	#
54	# makemeso -d ## no compilation, just check the name of the compile folder
55	#
56	# makemeso -c ideal ## idealized mode (convective cell, mountain wave, etc...)
57	# makemeso -c les ## large-eddy simulations mode based on WRFV3
58	#
59	# makemeso -n ## do not recompile LMD physics (must have been compiled before)
60	#
61	# makemeso < last ## basic use + skip questions [! script must have been executed at least once]
62	# makemeso -r < last ## basic use + skip questions + only known config
63	# makemeso -nr < last ## basic use + skip questions + only known config + no LMD phys recompile
64	#
65	# makemeso -j ## just compile the LMD physics
66	#
67	# makemeso -g ## debug mode
68	#
69	# makemeso -h ## display options
70	#
71	# makemeso -p ## with new LMD physics
72	#
73	# makemeso -f ## fresh start [clean -a]
74	#
75	# makemeso -s storm ## a specific scenario, you need a corresponding mars_lmd_... (only for newphys)
76	#
77	# makemeso -x ## a case with no LMD physics included
78	" ; exit ;;
79	esac
80	done
81
82	#--------------
83	# talk w/ user
84	#--------------
85	echo '****************************************'
86	echo ' LMD Mesoscale Model Compiler. Welcome.'
87	echo '****************************************'
88	if [[ "${phys}" == "newphys_" ]]
89	then
90	echo '*********with new physics***********'
91	echo '****************************************'
92	fi
93	# computer
94	uname -a \| grep x86_64 > /dev/null
95	if [[ "$?" == 0 ]]
96	then
97	machine='64'
98	else
99	machine='32'
100	fi
101	# compiler
102	echo "Supported compiler options are "
103	echo " <1> pgf90"
104	echo " <2> g95"
105	echo " <3> pgf90 + mpi"
106	echo " <4> ifort"
107	echo " <5> ifort + mpi"
108	echo " <7> xlf + mpi (IBM AIX)"
109	echo "Your choice ?" ; read reply
110	case ${reply} in
111	1) compilo='pgf' ; numproc=1 ;;
112	2) compilo='g95' ; numproc=1 ;;
113	3) compilo='mpi'
114	if [[ "${WHERE_MPI}" = "" ]]
115	then
116	echo Please initialize the variable WHERE_MPI in your environnement
117	exit
118	fi
119	echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
120	4) compilo='ifort' ; numproc=1 ;;
121	5) compilo='mpifort' ; echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
122	7) compilo='mpixlf' ; echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
123	### for tests
124	99) compilo='gnu' ; numproc=1 ;;
125	*) echo not supported by this script ; exit ;;
126	esac
127	# dimensions
128	if [ ${donotcompile} -eq 0 ]
129	then
130	echo Grid points in longitude ? ; read lon
131	echo Grid points in latitude ? ; read lat
132	echo Number of vertical levels ? ; read level
133	fi
134	echo Number of domains ? ; read dom
135
136	###PB lecture dom si < last
137
138	case ${dom} in
139	1) single='_single' ;;
140	*) single='_nest' ;;
141	esac
142	if [ "${compilo}" = "mpi" -o "${compilo}" = "mpifort" -o "${compilo}" = "mpixlf" ]
143	then
144	single=''
145	fi
146
147	testflag=''
148	####
149	#testflag='_test'
150	####
151
152	conf_wrf="${config}${scenario}${phys}${compilo}_${machine}${single}${testflag}"
153	\rm what_folder 2> /dev/null
154	echo ${conf_wrf} > what_folder
155	if [ ${donotcompile} -eq 1 ]
156	then
157	#\rm what_folder 2> /dev/null
158	#echo '**********************'
159	#echo '*** Your folder is ...'
160	#echo '**********************'
161	#echo ${conf_wrf} \| tee what_folder
162	#cat what_folder
163	#echo ${conf_wrf} > what_folder
164	#echo ${reply} > what_compilo
165	#echo ${numproc} > what_numproc
166	if [[ "${phys}" != "nophys_" ]]
167	then
168	exit
169	fi
170	else
171	echo Number of tracers ? ; read tra
172	if [ ${tra} -eq 0 ]
173	then
174	tra=1
175	fi
176	if [[ "${phys}" == "newphys_" ]]
177	then
178	echo "How many types of scatterer are you using ? 1 [dust] or 2 [dust + water ice]" ; read scat
179	else
180	scat=1 ## dummy stuff
181	fi
182	fi
183	# folder
184	mkdir ${conf_wrf} 2> /dev/null
185	if [[ "$?" == 0 ]]
186	then
187	echo new folder ... link sources
188	if [[ "${phys}" == "newphys_" ]]
189	then
190	\rm copy_model_tmp > /dev/null 2> /dev/null
191	if [[ "${scenario}" == "" ]]
192	then
193	sed s+"mars_lmd"+"mars_lmd_new"+g SRC/SCRIPTS/copy_model > copy_model_tmp
194	else
195	echo SCENARIO ${scenario} DID YOU INCLUDE THE SPECIFIC folder ? ; read dummy
196	sed s+"mars_lmd"+"mars_lmd_new_${scenario}"+g SRC/SCRIPTS/copy_model > copy_model_tmp
197	if [[ "${config}" == "les" ]]
198	then
199	echo "NOT SUPPORTED, check options"
200	exit
201	fi
202	fi
203	if [[ "${config}" == "les" ]]
204	then
205	sed s+"PWD/SRC/"+"PWD/SRC/LES/"+g copy_model_tmp > yeah
206	mv yeah copy_model_tmp
207	fi
208	chmod 755 copy_model_tmp
209	./copy_model_tmp
210	\rm copy_model_tmp
211	mv zeWRFV2 ${conf_wrf}/WRFV2
212	cd ${conf_wrf}/WRFV2
213	if [[ "${scenario}" == "" ]]
214	then
215	ln -sf mars_lmd_new mars_lmd
216	else
217	ln -sf mars_lmd_new_${scenario} mars_lmd
218	cp ../../SRC/WRFV2/mars_lmd_new_${scenario}/Registry.EM mars_lmd_new_${scenario}/
219	cp ../../SRC/WRFV2/mars_lmd_new_${scenario}/*.inc mars_lmd_new_${scenario}/
220	cd Registry ; ln -sf ../mars_lmd_new_${scenario}/Registry.EM . ; cd ..
221	fi
222	#ln -sf meso_callkeys_newphys.h meso_callkeys.h
223	cd Registry ; Registry.bash ; cd ..
224	else
225	if [[ "${config}" == "les" ]]
226	then
227	### NB: With physics: LES folder // Without physics : LESnophys_ folder
228	### ---- because differences in 'modif' folder ----
229	sed s+"PWD/SRC/"+"PWD/SRC/LES$phys/"+g SRC/SCRIPTS/copy_model > copy_model_tmp
230	else
231	cp SRC/SCRIPTS/copy_model copy_model_tmp
232	fi
233	chmod 755 copy_model_tmp
234	./copy_model_tmp
235	\rm copy_model_tmp
236	mv zeWRFV2 ${conf_wrf}/WRFV2
237	cd ${conf_wrf}/WRFV2
238	cd Registry ; Registry.bash ; cd ..
239	fi
240	#### sparadrap consequent a l'utilisation de copy_model pour les liens
241	#### -- car alors il manque fftpack
242	if [[ "${config}" == "les" ]]
243	then
244	if [[ "${phys}" == "nophys_" ]]
245	then
246	## voir ci-dessus pour le folder
247	cp ../../SRC/LES$phys/correcfft ./
248	else
249	cp ../../SRC/LES/correcfft ./
250	fi
251	./correcfft
252	\rm correcfft
253	fi
254	else
255	cd ${conf_wrf}/WRFV2
256	if [ ${fresh_start} -eq 1 ]
257	then
258	echo '*** FRESH START, I clean everything'
259	### clean the whole place
260	clean -a > /dev/null 2> /dev/null
261	### get a possibly modified registry !
262	if [[ "${scenario}" == "" ]]
263	then
264	cp ../../SRC/WRFV2/Registry/Registry.EM Registry/
265	fi
266	if [[ "${config}" == "les" ]]
267	then
268	cp ../../SRC/LES/WRFV2/Registry/Registry.EM Registry/
269	fi
270	### ensure the model will be recompiled from scratch with correct registry
271	cd Registry ; mv Registry Registry.bak ; Registry.bash ; cd ..
272	# answer='y' ## a voir... pas si sur
273	# else
274	# if [[ "${phys}" != "nophys_" ]]
275	# then
276	# echo Did you modify anything in the Registry or clean ? y for yes, any key for no ; read answer
277	# case ${answer} in
278	# y) cd Registry ; mv Registry Registry.bak ; Registry.bash ; cd .. ;;
279	# *) answer='no' ;;
280	# esac
281	# fi
282	fi
283	fi
284
285	# summary
286	echo '**********************'
287	echo '*** Your folder is ...'
288	echo '**********************'
289	echo ${conf_wrf}
290	echo '**********************'
291	echo '****************************************'
292	echo so ...
293	echo your computer is ${machine} bits
294	echo ${compilo} is your compiler
295	if [[ "${compilo}" = "mpi" ]]
296	then
297	echo MPICH is in ${WHERE_MPI}
298	fi
299	echo you will use ${numproc} processors
300	echo you have ${lon} x points
301	echo ' '${lat} y points
302	echo ' '${level} z points
303	echo ' '${dom} domains
304	echo ' '${tra} tracers
305	if [[ "${phys}" == "newphys_" ]]
306	then
307	echo ' '${scat} scatterers
308	fi
309	echo '****************************************'
310	# save answer
311	\rm last 2> /dev/null
312	touch last
313	echo ${reply} >> last
314	if [ "${compilo}" = "mpi" -o "${compilo}" = "mpifort" -o "${compilo}" = "mpixlf" ]
315	then
316	echo ${numproc} >> last
317	fi
318	echo ${lon} >> last
319	echo ${lat} >> last
320	echo ${level} >> last
321	echo ${dom} >> last
322	echo ${tra} >> last
323	echo ${scat} >> last
324	#echo ${answer} >> last
325
326	#------------
327	# log files
328	#------------
329	\rm log_compile 2> /dev/null
330	\rm log_error 2> /dev/null
331
332	#-----------------
333	# configure WRF
334	#-----------------
335	mv configure.wrf configure.wrf.bak 2> /dev/null
336	########################
337	conf_wrf_forall="${compilo}_${machine}${single}${testflag}"
338
339	#### in this case options are different because for LES, WRFV3 is used
340	if [[ "${config}" == "les" ]]
341	then
342	conf_wrf_forall="${config}${compilo}_${machine}${single}${testflag}"
343	fi
344
345	case ${conf_wrf_forall} in
346
347	#######LES-specific (WRFV3-based) -- previously in 'makeles'
348	#######
349
350	lesmpi_64) ## MPI (dm) 64 bits [PS: remplacer 3 par 4 pour openMP]
351	\rm conf > /dev/null 2> /dev/null ; touch conf ; echo 3 >> conf ; echo 1 >> conf
352	\rm configure.wrf > /dev/null 2> /dev/null ; ./configure < conf > /dev/null 2> /dev/null
353	sed s+"-lnetcdf"+"-lnetcdf -L../mars_lmd/libo -llmd"+g configure.wrf > yeah ; mv -f yeah configure.wrf
354	if [[ "$(hostname)" == "ciclad1.ipsl.jussieu.fr" ]]
355	then
356	echo "SPECIFIC CHANGES FOR CICLAD CLUSTER. EDIT makemeso IF YOU ENCOUNTER PROBLEMS."
357	#sed s+"mpif90 -f90=$(SFC)"+"/usr/lib64/openmpi/1.4.2-pgf/bin/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
358	#sed s+"mpicc -cc=$(SCC)"+"/usr/lib64/openmpi/1.4.2-gfortran/bin/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
359	sed s+"mpif90 -f90=\$(SFC)"+"/usr/lib64/openmpi/1.4.3-pgfgcc/bin/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
360	sed s+"mpicc -cc=\$(SCC)"+"/usr/lib64/openmpi/1.4.3-pgfgcc/bin/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
361	else
362	#sed s+"mpif90"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
363	#sed s+"mpicc"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
364	#### OPENMPI
365	sed s+"mpif90 -f90=\$(SFC)"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
366	sed s+"mpicc -cc=\$(SCC)"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
367	fi
368	sed s+"-fastsse"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
369	### pas forcement necessaire ici mais OK
370	sed s+"-llmd"+"-llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
371	\rm conf > /dev/null ;;
372
373	lesmpifort_64) ## MPI (dm) 64 bits IFORT
374	\rm conf > /dev/null 2> /dev/null ; touch conf ; echo 7 >> conf ; echo 1 >> conf
375	\rm configure.wrf > /dev/null 2> /dev/null ; ./configure < conf > /dev/null 2> /dev/null
376	sed s+"-lnetcdf"+"-lnetcdf -L../mars_lmd/libo -llmd"+g configure.wrf > yeah ; mv -f yeah configure.wrf
377	sed s+"mpif90"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
378	sed s+"mpicc"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
379	sed s+"-fastsse"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
380	sed s+"-llmd"+"-llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
381	\rm conf > /dev/null ;;
382
383	#######
384	#######LES-specific (WRFV3-based) -- previously in 'makeles'
385
386	#######TEST TEST
387	# GFORTRAN, 64 bits, no nesting
388	gnu_64_single) cd arch ; ln -sf ../configure.defaults.gfortran64 configure.defaults ; cd ..
389	echo 15 \| configure > log_compile 2> log_error
390	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
391	sed s+"-L../mars_lmd/libo -llmd"+"-L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf ;;
392	#######TEST TEST
393	# PGF90, 32 bits, no nesting
394	pgf_32_single) echo 1 \| configure > log_compile 2> log_error
395	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
396	# PGF90, 32 bits, nesting
397	pgf_32_nest) echo 2 \| configure > log_compile 2> log_error
398	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
399	# PGF90, 64 bits, no nesting
400	pgf_64_single) echo 1 \| configure > log_compile 2> log_error
401	#### the following line is necessary because readtesassim has a line "use netcdf" in it!
402	#sed s+"-L../mars_lmd/libo -llmd"+"-L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
403	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
404	# PGF90, 64 bits, nesting
405	pgf_64_nest) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
406	echo 4 \| configure > log_compile 2> log_error
407	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
408	# G95, 32 bits, no nesting
409	g95_32_single) echo 13 \| configure > log_compile 2> log_error
410	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
411	# G95, 64 bits, no nesting ### we modify configure.defaults to add x86_64 next to g95 in the header comment
412	g95_64_single) cd arch ; sed s/"PC Linux i486 i586 i686, g95 compiler"/"PC Linux i486 i586 i686 x86_64, g95 compiler"/g configure.defaults > yeahyeahyeah ; rm configure.defaults ; mv yeahyeahyeah configure.defaults ; cd ..
413	echo 14 \| configure > log_compile 2> log_error
414	##### marche pas ....
415	#sed s+"-fno-second-underscore"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
416	#sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
417	#sed s+"-L../mars_lmd/libo -llmd"+"-L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf ;;
418	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
419	#sed s+"= g95"+"= /home/physastro/aspiga/mysoft/g95/g95-install/bin/x86_64-unknown-linux-gnu-g95"+g configure.wrf > yeah ; mv -f yeah configure.wrf;;
420	# IFORT, 64 bits, no nesting
421	ifort_64_single) echo 5 \| configure > log_compile 2> log_error
422	sed s+"-DIFORT_KLUDGE"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
423	## !!! NETCDF must be defined
424	sed s+"lio_grib_share"+"lio_grib_share -L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah
425	mv -f yeah configure.wrf ;;
426	mpifort_64) # MPI+IFORT, 64 bits, no nesting / nesting
427	echo 9 \| configure > log_compile 2> log_error
428	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
429	sed s+"-f90=ifort"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
430	sed s+"-cc=icc"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
431	sed s+"-DIFORT_KLUDGE"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
432	sed s+"O3"+"O2"+g configure.wrf > yeah ; mv -f yeah configure.wrf
433	#sed s+"O3"+"O0"+g configure.wrf > yeah ; mv -f yeah configure.wrf ### pour compilation rapide
434	#-w -ftz -align all -fno-alias -fp-model precise >>> options indiquees dans WRF3
435	#http://software.intel.com/en-us/articles/performance-tools-for-software-developers-building-wrf-with-the-intel-compilers/
436	#### NB: RSL is replaced by RSL_LITE, better memory capacity, less seg fault
437	sed s+"../external/RSL/RSL"+"../external/RSL_LITE"+g configure.wrf > yeah ; mv -f yeah configure.wrf
438	sed s+"-DWRF_RSL_IO"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
439	sed s+"-DRSL"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
440	sed s+"librsl.a"+"librsl_lite.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
441	sed s+"../external/RSL/gen"+"../external/RSL_LITE/gen"+g configure.wrf > yeah ; mv -f yeah configure.wrf
442	sed s+"../external/RSL/module"+"../external/RSL_LITE/module"+g configure.wrf > yeah ; mv -f yeah configure.wrf
443	sed s+"-lrsl"+"-lrsl_lite"+g configure.wrf > yeah ; mv -f yeah configure.wrf
444	sed s+"linux"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
445	### necessary even if mpi-selector is used (no need in makegcm though)
446	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g > yeah ; mv -f yeah configure.wrf
447	sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
448	## !!! NETCDF must be defined
449	sed s+"-L../mars_lmd/libo -llmd"+"-L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah
450	mv -f yeah configure.wrf
451	#### POUR LE TRAITEMENT PARTICULIERS des NESTS sur iDATAPLEX [cf. module_lmd_driver]
452	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DSPECIAL_NEST_SAVE "+g configure.wrf > yeah
453	mv -f yeah configure.wrf ;;
454	# MPICH, 64 bits, no nesting / nesting
455	mpi_64) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
456	echo 3 \| configure > log_compile 2> log_error
457	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
458	### the following line is necessary because readtesassim has a line "use netcdf" in it!
459	sed s+"-L../mars_lmd/libo -llmd"+"-L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
460	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g > yeah
461	#sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT -w -O3"+g > yeah
462	#\| sed s+"fastsse"+"fast"+g > yeah
463	mv -f yeah configure.wrf ;;
464	# #sed s+"-fastsse"+"-O2 -Munroll -Mcache_align"+g configure.wrf > yeah
465	# ##sed s+"-fastsse"+"-O2 -fpic"+g configure.wrf > yeah ## marche pas, ILM problem
466	# ##sed s+"-fastsse"+"-mcmodel=medium -Mlarge_arrays"+g configure.wrf > yeah ## marche pas, ILM problem
467	#sed s+"-fastsse"+"-O3 -tp=nehalem-64 -fastsse -Mscalarsse -Mvect=sse -Mipa=fast"+g configure.wrf > yeah
468	#sed s+"-fastsse"+"-O2 -Munroll -Mcache_align"+g configure.wrf > yeah
469	#sed s+"-fastsse"+""+g configure.wrf > yeah
470	#sed s+"-fastsse"+"-fast"+g configure.wrf > yeah
471	#sed s+"-fastsse"+"-Mvect=noaltcode -Msmartalloc -Mprefetch=distance:8 -Mfprelaxed"+g configure.wrf > yeah
472	#mv -f yeah configure.wrf ;;
473	# MPICH, 64 bits, OK with periodic BC but no positive definite
474	mpi_64_test) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
475	echo 2 \| configure > log_compile 2> log_error
476	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
477	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g > yeah
478	mv -f yeah configure.wrf ;;
479	# XLF+MPICH on AIX machine (64 bits) with nesting, NB: the 32bits notice is not to be considered
480	mpixlf_32) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
481	echo 3 \| configure > log_compile 2> log_error
482	sed -f mars.sed configure.wrf > yeah
483	mv -f yeah configure.wrf ;;
484	# ANYTHING ELSE
485	*) echo NO PRESETS ...
486	if [ ${donotallow} -eq 0 ]
487	then
488	configure
489	else
490	# problem when an input file is used
491	echo 'please cd to '$PWD' and type ./configure'
492	exit
493	fi ;;
494	esac
495	########################
496
497
498	### here a case structure would be great
499
500	if [[ "${phys}" == "newphys_" ]]
501	then
502	if [[ "${config}" == "les" ]] ### LES is different because of WRFV3
503	then
504	sed s+"ARCH_LOCAL = "+"ARCH_LOCAL = -DNEWPHYS "+g configure.wrf > yeah
505	else
506	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DNEWPHYS "+g configure.wrf > yeah
507	fi
508	mv -f yeah configure.wrf
509	fi
510
511	if [[ ! ("${scenario}" == "") ]] ### not supported with LES for the moment
512	then
513	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -D${scenario} "+g configure.wrf > yeah
514	mv -f yeah configure.wrf
515	fi
516
517	################
518	if [[ "${phys}" == "nophys_" ]]
519	then
520	if [[ "${config}" == "les" ]] ### LES is different because of WRFV3
521	then
522	sed s+"ARCH_LOCAL = "+"ARCH_LOCAL = -DNOPHYS "+g configure.wrf > yeah ; mv -f yeah configure.wrf
523	sed s+"-L../mars_lmd/libo -llmd"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
524	else
525	### not tested yet but should be working
526	echo CAUTION CAUTION CAUTION NOT FULLY TESTED
527	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DNOPHYS "+g configure.wrf > yeah ; mv -f yeah configure.wrf
528	sed s+"-L../mars_lmd/libo -llmd"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
529	fi
530	fi
531	################
532
533	if [ ${debug} -ne 0 ] # not working for xlf!
534	then
535	echo 'DEBUG DEBUG DEBUG DEBUG'
536	sed s+"#-g"+"-g -Ktrap=fp -Mbounds"+g configure.wrf > yeah
537	#sed s+"#-g"+"-g"+g configure.wrf > yeah
538	mv -f yeah configure.wrf
539	fi
540
541
542	##################################################
543	# compile physics
544	##################################################
545	if [ ${donotcompilephys} -eq 0 ]
546	then
547
548	cd mars_lmd/
549
550	# required size
551	#----------------
552	case ${numproc} in
553	1) divx=1 ; divy=1 ;;
554	2) divx=1 ; divy=2 ;;
555	4) divx=2 ; divy=2 ;;
556	6) divx=2 ; divy=3 ;;
557	8) divx=2 ; divy=4 ;;
558	12) divx=3 ; divy=4 ;;
559	16) divx=4 ; divy=4 ;;
560	20) divx=4 ; divy=5 ;;
561	24) divx=4 ; divy=6 ;;
562	32) divx=4 ; divy=8 ;;
563	64) divx=8 ; divy=8 ;;
564	128) divx=8 ; divy=16 ;;
565	*) echo not yet supported ; exit ;;
566	esac
567	physx=$(expr ${lon} - 1)
568	restex=$(expr ${physx} \% ${divx})
569	physy=$(expr ${lat} - 1)
570	restey=$(expr ${physy} \% ${divy})
571	if [[ ${restex} != 0 \|\| ${restey} != 0 ]]
572	then
573	echo nx-1 shall be divided by ${divx}
574	echo ny-1 shall be divided by ${divy}
575	exit
576	fi
577	physx=$(expr ${physx} \/ ${divx})
578	physy=$(expr ${physy} \/ ${divy})
579	physz=$(expr ${level} - 1)
580
581	# change this if you change num_soil_layers in WRF
582	# -- default is 10
583	if [[ "${phys}" == "newphys_" ]]
584	then
585	soilsize=18 ## nouvelle physique
586	else
587	soilsize=10
588	fi
589
590	# GCM environment variables
591	#--------------------------
592	export LMDGCM=$PWD
593	export LIBOGCM=$PWD/libo
594
595	# generate the appropriate dimphys
596	#---------------------------------
597	cd libf/phymars
598	\rm dimphys.h 2> /dev/null
599	if [[ "${phys}" == "newphys_" ]]
600	then
601	ln -sf meso_inc/meso_dimphys.h_ref .
602	fi
603	physize=$(expr ${physx} \* ${physy})
604	sed s/--xsize--/${physx}/g meso_dimphys.h_ref \| sed s/--ysize--/${physy}/g \| sed s/--physize--/${physize}/g \| sed s/--zsize--/${physz}/g \| sed s/--soilsize--/${soilsize}/g > dimphys.h
605	head -15 dimphys.h
606	### TEST new new phys
607	if [[ "${phys}" == "newphys_" ]]
608	then
609	touch gr_fi_dyn.F.lien
610	ln -sf ../dyn3d/gr_fi_dyn.F . ## dommage, a corriger
611	###############################
612	\rm scatterers.h
613	cat << EOF > scatterers.h
614	!-----------------------------------------------------------------------
615	! INCLUDE 'scatterers.h'
616	!
617	! Number of kind of tracer radiative properties
618	! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
619	! (ex: naerkind=1 if you use one dust mode without ice ...)
620	! (ex: naerkind=2 if you use one dust mode and active ice ...)
621	!-----------------------------------------------------------------------
622
623	integer, parameter :: naerkind=${scat}
624
625	!-----------------------------------------------------------------------
626	EOF
627	###############################
628	###############################
629	fi
630	###
631	###
632	cd ../..
633
634	# prepare for nesting
635	#---------------------
636	cd libf
637	duplicate${dom} 2> /dev/null
638	cd ..
639
640	# compile physics
641	#--------------------------
642	\rm libf/grid/dimensions.h 2> /dev/null
643	\rm -rf libo/* 2> /dev/null
644	echo 1. compiling LMD physics ...
645	echo compilation info in:
646	echo $PWD/libo/log_compile_phys
647
648	if [ ${debug} -ne 0 ]
649	then
650	echo 'DEBUG DEBUG DEBUG DEBUG'
651	nohup makegcm_${compilo} -debug -t ${tra} -p mars -d ${physz} testphys1d \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
652	else
653	nohup makegcm_${compilo} -t ${tra} -p mars -d ${physz} testphys1d \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
654	fi
655	echo ... done
656	# clean the duplicate routines
657	cd libf
658	duplicate1 2> /dev/null
659	cd ..
660
661	# merge LMD executables in one lib
662	#--------------------------------------
663	cd libo
664	mkdir temp
665	#cp -f LINUXfastI._${physz}_t${tra}_reg/*.a temp
666	cp -f LINUX/.a temp
667	cd temp
668	ar x libbibio.a
669	ar x libphymars.a
670	ar x libaeronomars.a
671	\rm *.a
672	ar r liblmd.a *
673	cp -f liblmd.a ..
674	cd ..
675	\rm -r temp
676	nm liblmd.a > liblmd_content
677	# finish merge
678	cd ..
679
680	# save a copy
681	#--------------
682	cp -f libo/liblmd.a libo/liblmd.a_${lon}_${lat}_${level}_${dom}_${tra}_${scat}
683	echo '****************************************'
684
685	# ok
686	#----
687	cd ..
688
689	# manage nest includes in module_lmd_driver.F
690	#----
691	cp call_meso_inifis$dom.inc call_meso_inifis.inc
692	cp call_meso_physiq$dom.inc call_meso_physiq.inc
693
694
695	fi
696	##################################################
697	# END compile physics
698	##################################################
699
700	#------------------
701	# compile WRF
702	#------------------
703	if [ ${justphys} -eq 0 ]
704	then
705
706	echo 2. compiling WRF dynamical core ...
707
708	if [[ "${phys}" == "nophys_" ]]
709	then
710	echo 'NO LMD PHYSICS included'
711	else
712	if [[ ! ( -f "call_meso_physiq.inc" ) ]]
713	then
714	echo 'did you compile the physics ? no call_meso_physiq.inc !'
715	exit
716	fi
717	fi
718
719	# be sure to compile with the most recent physics
720	touch phys/module_lmd_driver.F
721
722	# talk to user
723	echo '>>> compiling ... this may be long ... <<<'
724	echo check progress in:
725	echo $PWD/log_compile
726	echo check possible errors in:
727	echo $PWD/log_error
728
729	# compile ...
730	case ${config} in
731	'') ./compile em_real > log_compile 2> log_error
732	# save executables
733	cd main
734	if [[ -f real.exe ]]
735	then
736	echo 'Looks good ! real.exe is here...'
737	fi
738	if [[ -f wrf.exe ]]
739	then
740	echo 'Looks good ! wrf.exe is here...'
741	fi
742	cp -f real.exe ../../real_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
743	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
744	cd .. ;;
745	'ideal') #mkdir 'test/em_quarter_ss' 2> /dev/null
746	echo '>>> YOUR CONFIG IS : '${config}
747	./compile em_quarter_ss > log_compile 2> log_error
748	# save executables
749	cd main
750	if [[ -f ideal.exe ]]
751	then
752	echo 'Looks good ! ideal.exe is here...'
753	fi
754	if [[ -f wrf.exe ]]
755	then
756	echo 'Looks good ! wrf.exe is here...'
757	fi
758	cp -f ideal.exe ../../ideal_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
759	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
760	cd .. ;;
761	'les') echo '>>> YOUR CONFIG IS : '${config}
762	mkdir 'test/em_les' 2> /dev/null
763	./compile em_les > log_compile 2> log_error
764	# save executables
765	cd main
766	if [[ -f ideal.exe ]]
767	then
768	echo 'Looks good ! ideal.exe is here...'
769	fi
770	if [[ -f wrf.exe ]]
771	then
772	echo 'Looks good ! wrf.exe is here...'
773	fi
774	cp -f ideal.exe ../../ideal_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
775	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
776	cd .. ;;
777	*) echo not supported... please use ; echo ideal les ; exit ;;
778	esac
779	echo '*****last lines from log_error*******'
780	tail -n 20 log_error
781	fi
782
783	# the end
784	echo '****************************************'
785	echo 'done.'
786	echo '****************************************'
787	cp last ../makemeso_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}
788	mv last ../../
789
790	# add here specific messages
791	if [[ "${dom}" != "1" ]]
792	then
793	nest=$(expr ${lon} + 4)
794	echo NB: in namelist.input, please set:
795	echo '
796	max_dom = '$dom'
797	s_we = 1,1,
798	e_we = '$lon','$nest',
799	s_sn = 1,1,
800	e_sn = '$lat','$nest',
801	s_vert = 1,1,
802	e_vert = '$level','$level','
803	fi
804

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format