Context Navigation

makemeso @ 215

Last change on this file since 215 was 215, checked in by aslmd, 13 years ago
MESOSCALE: corrected an installation bug that has bad bad consequences at compilation! hence revision 207 to 214 are not operational.
Property svn:executable set to ``*
File size: 32.1 KB

Line
1	#! /bin/bash
2
3
4	##################################
5	# makemeso allows you to compile #
6	# WRF with modified LMD physics #
7	##################################
8
9	##############################
10	# Author: A. Spiga #
11	# New version : October 2008 #
12	# Last update : January 2009 #
13	# November 09 #
14	# January 11 #
15	##############################
16
17	###############################
18	#### Type makemeso -h for help
19	###############################
20
21
22
23	##############################################################################################
24	##############################################################################################
25	##############################################################################################
26	##############################################################################################
27
28	donotcompile=0
29	donotallow=0
30	config=''
31	donotcompilephys=0
32	justphys=0
33	debug=0
34	fresh_start=0
35	phys=""
36	scenario=""
37	while getopts "drc:njhgpfs:x" options; do
38	case $options in
39	d ) donotcompile=1;; ## just to check the compile folder
40	r ) donotallow=1;; ## allow only known config (useful with 'makemeso < last')
41	c ) config="${OPTARG}";; ## idealized cases
42	n ) donotcompilephys=1;; ## do not recompile physics
43	j ) justphys=1;; ## just compile LMD physics
44	g ) debug=1;; ## debug mode
45	p ) phys="newphys_";; ## with new physics
46	f ) fresh_start=1;; ## a fresh start
47	s ) scenario="${OPTARG}";; ## a specific scenario, you need a corresponding "mars_lmd_..."
48	x ) donotcompile=1;phys="nophys_";donotcompilephys=1;; ## a case with no LMD physics included
49	h ) echo "
50	# Use:
51	#
52	# makemeso ## basic use (real-case configuration)
53	#
54	# makemeso -d ## no compilation, just check the name of the compile folder
55	#
56	# makemeso -c ideal ## idealized mode (convective cell, mountain wave, etc...)
57	# makemeso -c les ## large-eddy simulations mode based on WRFV3
58	#
59	# makemeso -n ## do not recompile LMD physics (must have been compiled before)
60	#
61	# makemeso < last ## basic use + skip questions [! script must have been executed at least once]
62	# makemeso -r < last ## basic use + skip questions + only known config
63	# makemeso -nr < last ## basic use + skip questions + only known config + no LMD phys recompile
64	#
65	# makemeso -j ## just compile the LMD physics
66	#
67	# makemeso -g ## debug mode
68	#
69	# makemeso -h ## display options
70	#
71	# makemeso -p ## with new LMD physics
72	#
73	# makemeso -f ## fresh start [clean -a]
74	#
75	# makemeso -s storm ## a specific scenario, you need a corresponding mars_lmd_... (only for newphys)
76	#
77	# makemeso -x ## a case with no LMD physics included
78	" ; exit ;;
79	esac
80	done
81
82	#--------------
83	# talk w/ user
84	#--------------
85	echo '****************************************'
86	echo ' LMD Mesoscale Model Compiler. Welcome.'
87	echo '****************************************'
88	if [[ "${phys}" == "newphys_" ]]
89	then
90	echo '*********with new physics***********'
91	echo '****************************************'
92	fi
93	# computer
94	uname -a \| grep x86_64 > /dev/null
95	if [[ "$?" == 0 ]]
96	then
97	machine='64'
98	else
99	machine='32'
100	fi
101	# compiler
102	echo "Supported compiler options are "
103	echo " <1> pgf90"
104	echo " <2> g95"
105	echo " <3> pgf90 + mpi"
106	echo " <4> ifort"
107	echo " <5> ifort + mpi"
108	echo " <7> xlf + mpi (IBM AIX)"
109	echo "Your choice ?" ; read reply
110	case ${reply} in
111	1) compilo='pgf' ; numproc=1 ;;
112	2) compilo='g95' ; numproc=1 ;;
113	3) compilo='mpi'
114	if [[ "${WHERE_MPI}" = "" ]]
115	then
116	echo Please initialize the variable WHERE_MPI in your environnement
117	exit
118	fi
119	echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
120	4) compilo='ifort' ; numproc=1 ;;
121	5) compilo='mpifort' ; echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
122	7) compilo='mpixlf' ; echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
123	### for tests
124	99) compilo='gnu' ; numproc=1 ;;
125	*) echo not supported by this script ; exit ;;
126	esac
127	# dimensions
128	if [ ${donotcompile} -eq 0 ]
129	then
130	echo Grid points in longitude ? ; read lon
131	echo Grid points in latitude ? ; read lat
132	echo Number of vertical levels ? ; read level
133	fi
134	echo Number of domains ? ; read dom
135
136	###PB lecture dom si < last
137
138	case ${dom} in
139	1) single='_single' ;;
140	*) single='_nest' ;;
141	esac
142	if [ "${compilo}" = "mpi" -o "${compilo}" = "mpifort" -o "${compilo}" = "mpixlf" ]
143	then
144	single=''
145	fi
146
147	testflag=''
148	####
149	#testflag='_test'
150	####
151
152	conf_wrf="${config}${scenario}${phys}${compilo}_${machine}${single}${testflag}"
153	\rm what_folder 2> /dev/null
154	echo ${conf_wrf} > what_folder
155	if [ ${donotcompile} -eq 1 ]
156	then
157	#\rm what_folder 2> /dev/null
158	#echo '**********************'
159	#echo '*** Your folder is ...'
160	#echo '**********************'
161	#echo ${conf_wrf} \| tee what_folder
162	#cat what_folder
163	#echo ${conf_wrf} > what_folder
164	#echo ${reply} > what_compilo
165	#echo ${numproc} > what_numproc
166	if [[ "${phys}" != "nophys_" ]]
167	then
168	exit
169	fi
170	else
171	echo Number of tracers ? ; read tra
172	if [ ${tra} -eq 0 ]
173	then
174	tra=1
175	fi
176	if [[ "${phys}" == "newphys_" ]]
177	then
178	echo "How many types of scatterer are you using ? 1 [dust] or 2 [dust + water ice]" ; read scat
179	else
180	scat=1 ## dummy stuff
181	fi
182	fi
183	# folder
184	mkdir ${conf_wrf} 2> /dev/null
185	if [[ "$?" == 0 ]]
186	then
187	echo new folder ... link sources
188	if [[ "${phys}" == "newphys_" ]]
189	then
190	\rm copy_model_tmp > /dev/null
191	if [[ "${scenario}" == "" ]]
192	then
193	sed s+"mars_lmd"+"mars_lmd_new"+g SRC/copy_model > copy_model_tmp
194	else
195	echo SCENARIO ${scenario} DID YOU INCLUDE THE SPECIFIC folder ? ; read dummy
196	sed s+"mars_lmd"+"mars_lmd_new_${scenario}"+g SRC/copy_model > copy_model_tmp
197	if [[ "${config}" == "les" ]]
198	then
199	echo "NOT SUPPORTED, check options"
200	exit
201	fi
202	fi
203	if [[ "${config}" == "les" ]]
204	then
205	sed s+"PWD/SRC/"+"PWD/SRC/LES/"+g copy_model_tmp > yeah
206	mv yeah copy_model_tmp
207	fi
208	chmod 755 copy_model_tmp
209	./copy_model_tmp
210	\rm copy_model_tmp
211	mv zeWRFV2 ${conf_wrf}/WRFV2
212	cd ${conf_wrf}/WRFV2
213	if [[ "${scenario}" == "" ]]
214	then
215	ln -sf mars_lmd_new mars_lmd
216	else
217	ln -sf mars_lmd_new_${scenario} mars_lmd
218	cp ../../SRC/WRFV2/mars_lmd_new_${scenario}/Registry.EM mars_lmd_new_${scenario}/
219	cp ../../SRC/WRFV2/mars_lmd_new_${scenario}/*.inc mars_lmd_new_${scenario}/
220	cd Registry ; ln -sf ../mars_lmd_new_${scenario}/Registry.EM . ; cd ..
221	fi
222	ln -sf meso_callkeys_newphys.h meso_callkeys.h
223	cd Registry ; Registry.bash ; cd ..
224	else
225	if [[ "${config}" == "les" ]]
226	then
227	### NB: With physics: LES folder // Without physics : LESnophys_ folder
228	### ---- because differences in 'modif' folder ----
229	sed s+"PWD/SRC/"+"PWD/SRC/LES$phys/"+g SRC/copy_model > copy_model_tmp
230	else
231	cp SRC/copy_model copy_model_tmp
232	fi
233	chmod 755 copy_model_tmp
234	./copy_model_tmp
235	\rm copy_model_tmp
236	mv WRFV2 ${conf_wrf}/
237	cd ${conf_wrf}/WRFV2
238	cd Registry ; Registry.bash ; cd ..
239	fi
240	#### sparadrap consequent a l'utilisation de copy_model pour les liens
241	#### -- car alors il manque fftpack
242	if [[ "${config}" == "les" ]]
243	then
244	if [[ "${phys}" == "nophys_" ]]
245	then
246	## voir ci-dessus pour le folder
247	cp ../../SRC/LES$phys/correcfft ./
248	else
249	cp ../../SRC/LES/correcfft ./
250	fi
251	./correcfft
252	\rm correcfft
253	fi
254	else
255	cd ${conf_wrf}/WRFV2
256	if [ ${fresh_start} -eq 1 ]
257	then
258	echo '*** FRESH START, I clean everything'
259	clean -a > /dev/null 2> /dev/null
260	cd Registry ; mv Registry Registry.bak ; Registry.bash ; cd ..
261	answer='y' ## a voir... pas si sur
262	else
263	if [[ "${phys}" != "nophys_" ]]
264	then
265	echo Did you modify anything in the Registry or clean ? y for yes, any key for no ; read answer
266	case ${answer} in
267	y) cd Registry ; mv Registry Registry.bak ; Registry.bash ; cd .. ;;
268	*) answer='no' ;;
269	esac
270	fi
271	fi
272	fi
273
274	# summary
275	echo '**********************'
276	echo '*** Your folder is ...'
277	echo '**********************'
278	echo ${conf_wrf}
279	echo '**********************'
280	echo '****************************************'
281	echo so ...
282	echo your computer is ${machine} bits
283	echo ${compilo} is your compiler
284	if [[ "${compilo}" = "mpi" ]]
285	then
286	echo MPICH is in ${WHERE_MPI}
287	fi
288	echo you will use ${numproc} processors
289	echo you have ${lon} x points
290	echo ' '${lat} y points
291	echo ' '${level} z points
292	echo ' '${dom} domains
293	echo ' '${tra} tracers
294	if [[ "${phys}" == "newphys_" ]]
295	then
296	echo ' '${scat} scatterers
297	fi
298	echo '****************************************'
299	# save answer
300	\rm last 2> /dev/null
301	touch last
302	echo ${reply} >> last
303	if [ "${compilo}" = "mpi" -o "${compilo}" = "mpifort" -o "${compilo}" = "mpixlf" ]
304	then
305	echo ${numproc} >> last
306	fi
307	echo ${lon} >> last
308	echo ${lat} >> last
309	echo ${level} >> last
310	echo ${dom} >> last
311	echo ${tra} >> last
312	echo ${answer} >> last
313	echo ${scat} >> last
314
315	#------------
316	# log files
317	#------------
318	\rm log_compile 2> /dev/null
319	\rm log_error 2> /dev/null
320
321	#-----------------
322	# configure WRF
323	#-----------------
324	mv configure.wrf configure.wrf.bak 2> /dev/null
325	########################
326	conf_wrf_forall="${compilo}_${machine}${single}${testflag}"
327
328	#### in this case options are different because for LES, WRFV3 is used
329	if [[ "${config}" == "les" ]]
330	then
331	conf_wrf_forall="${config}${compilo}_${machine}${single}${testflag}"
332	fi
333
334	case ${conf_wrf_forall} in
335
336	#######LES-specific (WRFV3-based) -- previously in 'makeles'
337	#######
338
339	lesmpi_64) ## MPI (dm) 64 bits [PS: remplacer 3 par 4 pour openMP]
340	\rm conf > /dev/null 2> /dev/null ; touch conf ; echo 3 >> conf ; echo 1 >> conf
341	\rm configure.wrf > /dev/null 2> /dev/null ; ./configure < conf > /dev/null 2> /dev/null
342	sed s+"-lnetcdf"+"-lnetcdf -L../mars_lmd/libo -llmd"+g configure.wrf > yeah ; mv -f yeah configure.wrf
343	if [[ "$(hostname)" == "ciclad1.ipsl.jussieu.fr" ]]
344	then
345	echo "SPECIFIC CHANGES FOR CICLAD CLUSTER. EDIT makemeso IF YOU ENCOUNTER PROBLEMS."
346	#sed s+"mpif90 -f90=$(SFC)"+"/usr/lib64/openmpi/1.4.2-pgf/bin/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
347	#sed s+"mpicc -cc=$(SCC)"+"/usr/lib64/openmpi/1.4.2-gfortran/bin/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
348	sed s+"mpif90 -f90=\$(SFC)"+"/usr/lib64/openmpi/1.4.3-pgfgcc/bin/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
349	sed s+"mpicc -cc=\$(SCC)"+"/usr/lib64/openmpi/1.4.3-pgfgcc/bin/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
350	else
351	sed s+"mpif90"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
352	sed s+"mpicc"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
353	fi
354	sed s+"-fastsse"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
355	### pas forcement necessaire ici mais OK
356	sed s+"-llmd"+"-llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
357	\rm conf > /dev/null ;;
358
359	lesmpifort_64) ## MPI (dm) 64 bits IFORT
360	\rm conf > /dev/null 2> /dev/null ; touch conf ; echo 7 >> conf ; echo 1 >> conf
361	\rm configure.wrf > /dev/null 2> /dev/null ; ./configure < conf > /dev/null 2> /dev/null
362	sed s+"-lnetcdf"+"-lnetcdf -L../mars_lmd/libo -llmd"+g configure.wrf > yeah ; mv -f yeah configure.wrf
363	sed s+"mpif90"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
364	sed s+"mpicc"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
365	sed s+"-fastsse"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
366	sed s+"-llmd"+"-llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
367	\rm conf > /dev/null ;;
368
369	#######
370	#######LES-specific (WRFV3-based) -- previously in 'makeles'
371
372	#######TEST TEST
373	# GFORTRAN, 64 bits, no nesting
374	gnu_64_single) cd arch ; ln -sf ../configure.defaults.gfortran64 configure.defaults ; cd ..
375	echo 15 \| configure > log_compile 2> log_error
376	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
377	sed s+"-L../mars_lmd/libo -llmd"+"-L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf ;;
378	#######TEST TEST
379	# PGF90, 32 bits, no nesting
380	pgf_32_single) echo 1 \| configure > log_compile 2> log_error
381	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
382	# PGF90, 32 bits, nesting
383	pgf_32_nest) echo 2 \| configure > log_compile 2> log_error
384	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
385	# PGF90, 64 bits, no nesting
386	pgf_64_single) echo 1 \| configure > log_compile 2> log_error
387	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
388	# PGF90, 64 bits, nesting
389	pgf_64_nest) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
390	echo 4 \| configure > log_compile 2> log_error
391	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
392	# G95, 32 bits, no nesting
393	g95_32_single) echo 13 \| configure > log_compile 2> log_error
394	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
395	# G95, 64 bits, no nesting ### we modify configure.defaults to add x86_64 next to g95 in the header comment
396	g95_64_single) cd arch ; sed s/"PC Linux i486 i586 i686, g95 compiler"/"PC Linux i486 i586 i686 x86_64, g95 compiler"/g configure.defaults > yeahyeahyeah ; rm configure.defaults ; mv yeahyeahyeah configure.defaults ; cd ..
397	echo 14 \| configure > log_compile 2> log_error
398	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
399	#sed s+"= g95"+"= /home/physastro/aspiga/mysoft/g95/g95-install/bin/x86_64-unknown-linux-gnu-g95"+g configure.wrf > yeah ; mv -f yeah configure.wrf;;
400	# IFORT, 64 bits, no nesting
401	ifort_64_single) echo 5 \| configure > log_compile 2> log_error
402	sed s+"-DIFORT_KLUDGE"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
403	## !!! NETCDF must be defined
404	sed s+"lio_grib_share"+"lio_grib_share -L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah
405	mv -f yeah configure.wrf ;;
406	mpifort_64) # MPI+IFORT, 64 bits, no nesting / nesting
407	echo 9 \| configure > log_compile 2> log_error
408	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
409	sed s+"-f90=ifort"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
410	sed s+"-cc=icc"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
411	sed s+"-DIFORT_KLUDGE"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
412	sed s+"O3"+"O2"+g configure.wrf > yeah ; mv -f yeah configure.wrf
413	#sed s+"O3"+"O0"+g configure.wrf > yeah ; mv -f yeah configure.wrf ### pour compilation rapide
414	#-w -ftz -align all -fno-alias -fp-model precise >>> options indiquees dans WRF3
415	#http://software.intel.com/en-us/articles/performance-tools-for-software-developers-building-wrf-with-the-intel-compilers/
416	#### NB: RSL is replaced by RSL_LITE, better memory capacity, less seg fault
417	sed s+"../external/RSL/RSL"+"../external/RSL_LITE"+g configure.wrf > yeah ; mv -f yeah configure.wrf
418	sed s+"-DWRF_RSL_IO"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
419	sed s+"-DRSL"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
420	sed s+"librsl.a"+"librsl_lite.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
421	sed s+"../external/RSL/gen"+"../external/RSL_LITE/gen"+g configure.wrf > yeah ; mv -f yeah configure.wrf
422	sed s+"../external/RSL/module"+"../external/RSL_LITE/module"+g configure.wrf > yeah ; mv -f yeah configure.wrf
423	sed s+"-lrsl"+"-lrsl_lite"+g configure.wrf > yeah ; mv -f yeah configure.wrf
424	sed s+"linux"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
425	### necessary even if mpi-selector is used (no need in makegcm though)
426	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g > yeah ; mv -f yeah configure.wrf
427	sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
428	## !!! NETCDF must be defined
429	sed s+"-L../mars_lmd/libo -llmd"+"-L../mars_lmd/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah
430	mv -f yeah configure.wrf
431	#### POUR LE TRAITEMENT PARTICULIERS des NESTS sur iDATAPLEX [cf. module_lmd_driver]
432	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DSPECIAL_NEST_SAVE "+g configure.wrf > yeah
433	mv -f yeah configure.wrf ;;
434	# MPICH, 64 bits, no nesting / nesting
435	mpi_64) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
436	echo 3 \| configure > log_compile 2> log_error
437	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
438	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g > yeah
439	#\| sed s+"fastsse"+"fast"+g > yeah
440	mv -f yeah configure.wrf ;;
441	#sed s+"-fastsse"+"-O2 -Munroll -Mcache_align"+g configure.wrf > yeah
442	##sed s+"-fastsse"+"-O2 -fpic"+g configure.wrf > yeah ## marche pas, ILM problem
443	##sed s+"-fastsse"+"-mcmodel=medium -Mlarge_arrays"+g configure.wrf > yeah ## marche pas, ILM problem
444	#mv -f yeah configure.wrf ;;
445	# MPICH, 64 bits, OK with periodic BC but no positive definite
446	mpi_64_test) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
447	echo 2 \| configure > log_compile 2> log_error
448	sed -f mars.sed configure.wrf > yeah ; mv -f yeah configure.wrf
449	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g > yeah
450	mv -f yeah configure.wrf ;;
451	# XLF+MPICH on AIX machine (64 bits) with nesting, NB: the 32bits notice is not to be considered
452	mpixlf_32) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
453	echo 3 \| configure > log_compile 2> log_error
454	sed -f mars.sed configure.wrf > yeah
455	mv -f yeah configure.wrf ;;
456	# ANYTHING ELSE
457	*) echo NO PRESETS ...
458	if [ ${donotallow} -eq 0 ]
459	then
460	configure
461	else
462	# problem when an input file is used
463	echo 'please cd to '$PWD' and type ./configure'
464	exit
465	fi ;;
466	esac
467	########################
468
469
470	### here a case structure would be great
471
472	if [[ "${phys}" == "newphys_" ]]
473	then
474	if [[ "${config}" == "les" ]] ### LES is different because of WRFV3
475	then
476	sed s+"ARCH_LOCAL = "+"ARCH_LOCAL = -DNEWPHYS "+g configure.wrf > yeah
477	else
478	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DNEWPHYS "+g configure.wrf > yeah
479	fi
480	mv -f yeah configure.wrf
481	fi
482
483	if [[ ! ("${scenario}" == "") ]] ### not supported with LES for the moment
484	then
485	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -D${scenario} "+g configure.wrf > yeah
486	mv -f yeah configure.wrf
487	fi
488
489	################
490	if [[ "${phys}" == "nophys_" ]]
491	then
492	if [[ "${config}" == "les" ]] ### LES is different because of WRFV3
493	then
494	sed s+"ARCH_LOCAL = "+"ARCH_LOCAL = -DNOPHYS "+g configure.wrf > yeah ; mv -f yeah configure.wrf
495	sed s+"-L../mars_lmd/libo -llmd"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
496	else
497	### not tested yet but should be working
498	echo CAUTION CAUTION CAUTION NOT FULLY TESTED
499	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DNOPHYS "+g configure.wrf > yeah ; mv -f yeah configure.wrf
500	sed s+"-L../mars_lmd/libo -llmd"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
501	fi
502	fi
503	################
504
505	if [ ${debug} -ne 0 ] # not working for xlf!
506	then
507	echo 'DEBUG DEBUG DEBUG DEBUG'
508	sed s+"#-g"+"-g"+g configure.wrf > yeah
509	mv -f yeah configure.wrf
510	fi
511
512
513	##################################################
514	# compile physics
515	##################################################
516	if [ ${donotcompilephys} -eq 0 ]
517	then
518
519	cd mars_lmd/
520
521	# required size
522	#----------------
523	case ${numproc} in
524	1) physx=$(expr ${lon} - 1)
525	physy=$(expr ${lat} - 1)
526	physz=$(expr ${level} - 1) ;;
527	2) physx=$(expr ${lon} - 1)
528	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 2)
529	physz=$(expr ${level} - 1) ;;
530	4) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 2)
531	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 2)
532	physz=$(expr ${level} - 1) ;;
533	6) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 2)
534	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 3)
535	physz=$(expr ${level} - 1) ;;
536	8) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 2)
537	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 4)
538	physz=$(expr ${level} - 1) ;;
539	12) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 3)
540	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 4)
541	physz=$(expr ${level} - 1) ;;
542	16) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 4)
543	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 4)
544	physz=$(expr ${level} - 1) ;;
545	20) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 4)
546	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 5)
547	physz=$(expr ${level} - 1) ;;
548	24) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 4)
549	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 6)
550	physz=$(expr ${level} - 1) ;;
551	32) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 4)
552	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 8)
553	physz=$(expr ${level} - 1) ;;
554	64) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 8)
555	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 8)
556	physz=$(expr ${level} - 1) ;;
557	128) physx=$(expr ${lon} - 1) ; physx=$(expr ${physx} \/ 8)
558	physy=$(expr ${lat} - 1) ; physy=$(expr ${physy} \/ 16)
559	physz=$(expr ${level} - 1) ;;
560	*) echo not supported ; exit
561	esac
562
563	# change this if you change num_soil_layers in WRF
564	# -- default is 10
565	if [[ "${phys}" == "newphys_" ]]
566	then
567	soilsize=18 ## nouvelle physique
568	else
569	soilsize=10
570	fi
571
572	# GCM environment variables
573	#--------------------------
574	export LMDGCM=$PWD
575	export LIBOGCM=$PWD/libo
576
577	# generate the appropriate dimphys
578	#---------------------------------
579	cd libf/phymars
580	\rm dimphys.h 2> /dev/null
581	physize=$(expr ${physx} \* ${physy})
582	sed s/--xsize--/${physx}/g meso_dimphys.h_ref \| sed s/--ysize--/${physy}/g \| sed s/--physize--/${physize}/g \| sed s/--zsize--/${physz}/g \| sed s/--soilsize--/${soilsize}/g > dimphys.h
583	head -15 dimphys.h
584	###
585	### TEST new new phys
586	if [[ "${phys}" == "newphys_" ]]
587	then
588	touch callkeys.h.meso
589	ln -sf meso_callkeys.h callkeys.h
590	#touch dustlift.F.meso
591	# ln -sf meso_dustlift.F dustlift.F ## attention avec "ancienne nouvelle physique"
592	touch readtesassim.F90.meso
593	ln -sf meso_readtesassim.F90 readtesassim.F90 ## attention idem
594	touch gr_fi_dyn.F.lien
595	ln -sf ../dyn3d/gr_fi_dyn.F . ## dommage, a corriger ## attention idem
596	###############################
597	###############################
598	\rm scatterers.h
599	cat << EOF > scatterers.h
600	!-----------------------------------------------------------------------
601	! INCLUDE 'scatterers.h'
602	!
603	! Number of kind of tracer radiative properties
604	! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
605	! (ex: naerkind=1 if you use one dust mode without ice ...)
606	! (ex: naerkind=2 if you use one dust mode and active ice ...)
607	!-----------------------------------------------------------------------
608
609	integer, parameter :: naerkind=${scat}
610
611	!-----------------------------------------------------------------------
612	EOF
613	###############################
614	###############################
615	fi
616	###
617	###
618	cd ../..
619
620	# prepare for nesting
621	#---------------------
622	cd libf
623	duplicate${dom} 2> /dev/null
624	cd ..
625
626	# compile physics
627	#--------------------------
628	\rm libf/grid/dimensions.h 2> /dev/null
629	\rm -rf libo/* 2> /dev/null
630	echo 1. compiling LMD physics ...
631	echo compilation info in:
632	echo $PWD/libo/log_compile_phys
633
634	if [ ${debug} -ne 0 ]
635	then
636	echo 'DEBUG DEBUG DEBUG DEBUG'
637	nohup makegcm_${compilo} -debug -t ${tra} -p mars -d ${physz} testphys1d \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
638	else
639	nohup makegcm_${compilo} -t ${tra} -p mars -d ${physz} testphys1d \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
640	fi
641	echo ... done
642	# clean the duplicate routines
643	cd libf
644	duplicate1 2> /dev/null
645	cd ..
646
647	# merge LMD executables in one lib
648	#--------------------------------------
649	cd libo
650	mkdir temp
651	#cp -f LINUXfastI._${physz}_t${tra}_reg/*.a temp
652	cp -f LINUX/.a temp
653	cd temp
654	ar x libbibio.a
655	ar x libphymars.a
656	ar x libaeronomars.a
657	\rm *.a
658	ar r liblmd.a *
659	cp -f liblmd.a ..
660	cd ..
661	\rm -r temp
662	nm liblmd.a > liblmd_content
663	# finish merge
664	cd ..
665
666	# save a copy
667	#--------------
668	cp -f libo/liblmd.a libo/liblmd.a_${lon}_${lat}_${level}_${dom}_${tra}_${scat}
669	echo '****************************************'
670
671	# ok
672	#----
673	cd ..
674
675	# manage nest includes in module_lmd_driver.F
676	#----
677	cp call_meso_inifis$dom.inc call_meso_inifis.inc
678	cp call_meso_physiq$dom.inc call_meso_physiq.inc
679
680
681	fi
682	##################################################
683	# END compile physics
684	##################################################
685
686	#------------------
687	# compile WRF
688	#------------------
689	if [ ${justphys} -eq 0 ]
690	then
691
692	echo 2. compiling WRF dynamical core ...
693
694	if [[ "${phys}" == "nophys_" ]]
695	then
696	echo 'NO LMD PHYSICS included'
697	else
698	if [[ ! ( -f "call_meso_physiq.inc" ) ]]
699	then
700	echo 'did you compile the physics ? no call_meso_physiq.inc !'
701	exit
702	fi
703	fi
704
705	# be sure to compile with the most recent physics
706	touch phys/module_lmd_driver.F
707
708	# talk to user
709	echo '>>> compiling ... this may be long ... <<<'
710	echo check progress in:
711	echo $PWD/log_compile
712	echo check possible errors in:
713	echo $PWD/log_error
714
715	# compile ...
716	case ${config} in
717	'') compile em_real > log_compile 2> log_error
718	# save executables
719	cd main
720	if [[ -f real.exe ]]
721	then
722	echo 'Looks good ! real.exe is here...'
723	fi
724	if [[ -f wrf.exe ]]
725	then
726	echo 'Looks good ! wrf.exe is here...'
727	fi
728	cp -f real.exe ../../real_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
729	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
730	cd .. ;;
731	'ideal') #mkdir 'test/em_quarter_ss' 2> /dev/null
732	echo '>>> YOUR CONFIG IS : '${config}
733	compile em_quarter_ss > log_compile 2> log_error
734	# save executables
735	cd main
736	if [[ -f ideal.exe ]]
737	then
738	echo 'Looks good ! ideal.exe is here...'
739	fi
740	if [[ -f wrf.exe ]]
741	then
742	echo 'Looks good ! wrf.exe is here...'
743	fi
744	cp -f ideal.exe ../../ideal_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
745	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
746	cd .. ;;
747	'les') echo '>>> YOUR CONFIG IS : '${config}
748	mkdir 'test/em_les' 2> /dev/null
749	compile em_les > log_compile 2> log_error
750	# save executables
751	cd main
752	if [[ -f ideal.exe ]]
753	then
754	echo 'Looks good ! ideal.exe is here...'
755	fi
756	if [[ -f wrf.exe ]]
757	then
758	echo 'Looks good ! wrf.exe is here...'
759	fi
760	cp -f ideal.exe ../../ideal_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
761	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}.exe
762	cd .. ;;
763	*) echo not supported... please use ; echo ideal les ; exit ;;
764	esac
765	echo '*****last lines from log_error*******'
766	tail -n 20 log_error
767	fi
768
769	# the end
770	echo '****************************************'
771	echo 'done.'
772	echo '****************************************'
773	cp last ../makemeso_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}_s${scat}
774	mv last ../../
775
776	# add here specific messages
777	if [[ "${dom}" != "1" ]]
778	then
779	nest=$(expr ${lon} + 4)
780	echo NB: in namelist.input, please set:
781	echo '
782	max_dom = '$dom'
783	s_we = 1,1,
784	e_we = '$lon','$nest',
785	s_sn = 1,1,
786	e_sn = '$lat','$nest',
787	s_vert = 1,1,
788	e_vert = '$level','$level','
789	fi
790

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format