Context Navigation

makemeso @ 1751

Last change on this file since 1751 was 1746, checked in by aslmd, 7 years ago
MESOSCALE. makemeso module_initialize_les module_initialize_real reverted back to r1723 because commit r1724 was based on corrupted versions.
Property svn:executable set to ``*
File size: 36.8 KB

Line
1	#! /bin/bash
2
3
4	##################################
5	# makemeso allows you to compile #
6	# WRF with modified LMD physics #
7	##################################
8
9	##############################
10	# Author: A. Spiga #
11	# New version : October 2008 #
12	# Last update : January 2009 #
13	# November 09 #
14	# January 11 #
15	##############################
16
17	###############################
18	#### Type makemeso -h for help
19	###############################
20
21
22
23	##############################################################################################
24	##############################################################################################
25	##############################################################################################
26	##############################################################################################
27
28	donotcompile=0
29	donotallow=0
30	config='real'
31	donotcompilephys=0
32	justphys=0
33	debug=0
34	fresh_start=0
35	phys="mars_lmd"
36	scenario=""
37	from_scratch=0
38
39	while getopts "drc:njhgp:fs:xe" options; do
40	case $options in
41	d ) donotcompile=1;; ## just to check the compile folder
42	r ) donotallow=1;; ## allow only known config (useful with 'makemeso < last')
43	c ) config="${OPTARG}";; ## idealized cases
44	n ) donotcompilephys=1;; ## do not recompile physics
45	j ) justphys=1;; ## just compile LMD physics
46	g ) debug=1;; ## debug mode
47	p ) phys="${OPTARG}";; ## choose physics
48	f ) fresh_start=1;; ## a fresh start
49	e ) from_scratch=1;; ## a fresh start with a completely new folder
50	s ) scenario="${OPTARG}";; ## a specific scenario (with precompiling flags)
51	x ) donotcompile=1;phys="void_lmd_new";donotcompilephys=1;; ## a case with no LMD physics included
52	h ) echo "
53	# Use:
54	#
55	# makemeso ## basic use (real-case configuration)
56	#
57	# makemeso -d ## no compilation, just check the name of the compile folder
58	#
59	# makemeso -c ideal ## idealized mode (convective cell, mountain wave, etc...)
60	# makemeso -c les ## large-eddy simulations mode based on WRFV3
61	#
62	# makemeso -n ## do not recompile LMD physics (must have been compiled before)
63	#
64	# makemeso < last ## basic use + skip questions [! script must have been executed at least once]
65	# makemeso -r < last ## basic use + skip questions + only known config
66	# makemeso -nr < last ## basic use + skip questions + only known config + no LMD phys recompile
67	#
68	# makemeso -j ## just compile the LMD physics
69	#
70	# makemeso -g ## debug mode
71	#
72	# makemeso -h ## display options
73	#
74	# makemeso -p mars_lmd_new ## choose physics
75	# venus_lmd_new
76	#
77	# makemeso -f ## fresh start [clean -a]
78	#
79	# makemeso -e ## a completely new recompile with erasing the WHOLE compiling folder
80	#
81	# makemeso -s DUSTSTORM ## a specific scenario (with precompiling flags)
82	#
83	# makemeso -x ## a case with no LMD physics included
84	" ; exit ;;
85	esac
86	done
87
88	#--------------
89	# talk w/ user
90	#--------------
91	echo '****************************************'
92	echo ' LMD Mesoscale Model Compiler. Welcome.'
93	echo '****************************************'
94	if [[ "${phys}" == "new" ]]
95	then
96	echo '*********** PHYSICS: ' ${phys}
97	echo '****************************************'
98	fi
99	# computer
100	uname -a \| grep x86_64 > /dev/null
101	if [[ "$?" == 0 ]]
102	then
103	machine='64'
104	else
105	machine='32'
106	fi
107	# compiler
108	echo "Supported compiler options are "
109	echo " <1> pgf90"
110	echo " <2> g95"
111	echo " <3> pgf90 + mpi"
112	echo " <4> ifort"
113	echo " <5> ifort + mpi"
114	echo " <7> xlf + mpi (IBM AIX)"
115	echo "Your choice ?" ; read reply
116	case ${reply} in
117	1) compilo='pgf' ; numproc=1 ;;
118	2) compilo='g95' ; numproc=1 ;;
119	3) compilo='mpi'
120	if [[ "${WHERE_MPI}" = "" ]]
121	then
122	echo Please initialize the variable WHERE_MPI in your environnement
123	exit
124	fi ;;
125	4) compilo='ifort' ; numproc=1 ;;
126	5) compilo='mpifort' ;;
127	7) compilo='mpixlf' ;;
128	### for tests
129	99) compilo='gnu' ; numproc=1 ;;
130	*) echo not supported by this script ; exit ;;
131	esac
132	# number of processors
133	if [[ "${phys}" == "new" ]]
134	then
135	numproc=999
136	else
137	case ${reply} in
138	3) echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
139	5) echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
140	7) echo How many processors ? e.g. 1, 2, 4, 6, 8, 12, 16, 20, 24, 32, 64, 128 ; read numproc ;;
141	esac
142	fi
143
144	# dimensions
145	if [ ${donotcompile} -eq 0 ]
146	then
147	# ngrid: now dynamically set in newphys 03/2014
148	if [[ "${phys}" == "new" ]]
149	then
150	lon=999
151	lat=999
152	level=999
153	else
154	echo Grid points in longitude ? ; read lon
155	echo Grid points in latitude ? ; read lat
156	echo Number of vertical levels ? ; read level
157	fi
158	fi
159	echo Number of domains ? ; read dom
160
161	###PB lecture dom si < last
162
163	case ${dom} in
164	1) single='_single' ;;
165	*) single='_nest' ;;
166	esac
167	if [ "${compilo}" = "mpi" -o "${compilo}" = "mpifort" -o "${compilo}" = "mpixlf" ]
168	then
169	single=''
170	fi
171
172	testflag=''
173	####
174	#testflag='_test'
175	####
176
177	conf_wrf="${phys}_${config}${scenario}_${compilo}_${machine}${single}${testflag}"
178
179	if [ ${debug} -eq 1 ]
180	then
181	conf_wrf="debug_${conf_wrf}"
182	fi
183
184	\rm what_folder 2> /dev/null
185	echo ${conf_wrf} > what_folder
186	if [ ${donotcompile} -eq 0 ]
187	then
188	##\rm what_folder 2> /dev/null
189	##echo '**********************'
190	##echo '*** Your folder is ...'
191	##echo '**********************'
192	##echo ${conf_wrf} \| tee what_folder
193	##cat what_folder
194	##echo ${conf_wrf} > what_folder
195	##echo ${reply} > what_compilo
196	##echo ${numproc} > what_numproc
197	#if [[ "${phys}" != "nophys_" ]]
198	#then
199	# exit
200	#fi
201	#else
202	# tracers: now dynamically set in newphys 09/2013
203	if [[ "${phys}" == "new" ]]
204	then
205	tra=999
206	else
207	echo Number of tracers ? ; read tra
208	if [ ${tra} -eq 0 ]
209	then
210	tra=1
211	fi
212	fi
213	fi
214	# 'from scratch' case
215	if [ ${from_scratch} -eq 1 ]
216	then
217	echo "***** I ERASE THE FOLDER "${conf_wrf}
218	\rm -rf ${conf_wrf}
219	fi
220	# folder
221
222	mkdir ${conf_wrf} 2> /dev/null
223	if [[ "$?" == 0 ]]
224	then
225	echo new folder ... link sources
226	###############################################
227	echo ${phys}
228	./SRC/SCRIPTS/copy_model -p ${phys} -c ${config}
229	mv zeWRFV2 ${conf_wrf}/WRFV2
230	###############################################
231	if [[ "${phys}" == "new" ]]
232	then
233	cd ${conf_wrf}/WRFV2
234	if [[ "${config}" != "les" ]]
235	then
236	cp ../../SRC/WRFV2/Registry/Registry.EM.newphys Registry/Registry.EM
237	else
238	cp -L ../../SRC/LES/WRFV2/Registry/Registry.EM.newphys Registry/Registry.EM
239	fi
240	cd phys
241	ln -sf module_lmd_driver.F.new module_lmd_driver.F
242	cd ..
243
244	else
245	cd ${conf_wrf}/WRFV2
246	cd Registry ; ./Registry.bash ; cd ..
247	fi
248	#### sparadrap consequent a l'utilisation de copy_model pour les liens
249	#### -- car alors il manque fftpack
250	if [[ "${config}" == "les" ]]
251	then
252	cp ../../SRC/LES/correcfft ./
253	./correcfft
254	\rm correcfft
255	fi
256	else
257	cd ${conf_wrf}/WRFV2
258	if [ ${fresh_start} -eq 1 ]
259	then
260	echo '*** FRESH START, I clean everything'
261	### clean the whole place
262	clean -a > /dev/null 2> /dev/null
263	### get a possibly modified registry !
264	if [[ "${phys}" == "new" ]]
265	then
266	cp ../../SRC/WRFV2/Registry/Registry.EM.newphys Registry/Registry.EM
267	else
268	cp ../../SRC/WRFV2/Registry/Registry.EM Registry/
269	fi
270	if [[ "${config}" == "les" ]]
271	then
272	cp ../../SRC/LES/WRFV2/Registry/Registry.EM Registry/
273	fi
274	### ensure the model will be recompiled from scratch with correct registry
275	cd Registry ; mv Registry Registry.bak ; Registry.bash ; cd ..
276	# answer='y' ## a voir... pas si sur
277	# else
278	# if [[ "${phys}" != "nophys_" ]]
279	# then
280	# echo Did you modify anything in the Registry or clean ? y for yes, any key for no ; read answer
281	# case ${answer} in
282	# y) cd Registry ; mv Registry Registry.bak ; Registry.bash ; cd .. ;;
283	# *) answer='no' ;;
284	# esac
285	# fi
286	fi
287	fi
288
289	# summary
290	echo '**********************'
291	echo '*** Your folder is ...'
292	echo '**********************'
293	echo ${conf_wrf}
294	echo '**********************'
295	echo '****************************************'
296	echo so ...
297	echo your computer is ${machine} bits
298	echo ${compilo} is your compiler
299	if [[ "${compilo}" = "mpi" ]]
300	then
301	echo MPICH is in ${WHERE_MPI}
302	fi
303	echo you have ${dom} domains
304	if [[ "${phys}" == "new" ]]
305	then
306	echo number of processors can be changed without recompiling
307	echo x points can be changed without recompiling
308	echo y points can be changed without recompiling
309	echo z points can be changed without recompiling
310	echo number of tracers can be changed without recompiling
311	else
312	echo you will use ${numproc} processors
313	echo you have ${lon} x points
314	echo ' '${lat} y points
315	echo ' '${level} z points
316	echo ' '${tra} tracers
317	fi
318	echo '****************************************'
319	# save answer
320	\rm last 2> /dev/null
321	touch last
322	echo ${reply} >> last
323	if [[ "${phys}" != "new" ]]
324	then
325	if [ "${compilo}" = "mpi" -o "${compilo}" = "mpifort" -o "${compilo}" = "mpixlf" ]
326	then
327	echo ${numproc} >> last
328	fi
329	echo ${lon} >> last
330	echo ${lat} >> last
331	echo ${level} >> last
332	fi
333	echo ${dom} >> last
334	if [[ "${phys}" != *"new" ]]
335	then
336	echo ${tra} >> last
337	fi
338
339	#------------
340	# log files
341	#------------
342	\rm log_compile 2> /dev/null
343	\rm log_error 2> /dev/null
344
345	#-----------------
346	# configure WRF
347	#-----------------
348	mv configure.wrf configure.wrf.bak 2> /dev/null
349	########################
350	conf_wrf_forall="${compilo}_${machine}${single}${testflag}"
351
352	#### in this case options are different because for LES, WRFV3 is used
353	if [[ "${config}" == "les" ]]
354	then
355	conf_wrf_forall="${config}${compilo}_${machine}${single}${testflag}"
356	fi
357
358	case ${conf_wrf_forall} in
359
360	#######LES-specific (WRFV3-based) -- previously in 'makeles'
361	#######
362
363	lesmpi_64) ## MPI (dm) 64 bits [PS: remplacer 3 par 4 pour openMP]
364	\rm conf > /dev/null 2> /dev/null ; touch conf ; echo 3 >> conf ; echo 1 >> conf
365	\rm configure.wrf > /dev/null 2> /dev/null ; ./configure < conf > /dev/null 2> /dev/null
366	sed s+"-lnetcdf"+"-lnetcdf -L../$phys/libo -llmd"+g configure.wrf > yeah ; mv -f yeah configure.wrf
367	if [[ "$(hostname)" == "ciclad1.ipsl.jussieu.fr" ]]
368	then
369	echo "SPECIFIC CHANGES FOR CICLAD CLUSTER. EDIT makemeso IF YOU ENCOUNTER PROBLEMS."
370	#sed s+"mpif90 -f90=$(SFC)"+"/usr/lib64/openmpi/1.4.2-pgf/bin/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
371	#sed s+"mpicc -cc=$(SCC)"+"/usr/lib64/openmpi/1.4.2-gfortran/bin/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
372	sed s+"mpif90 -f90=\$(SFC)"+"/usr/lib64/openmpi/1.4.3-pgfgcc/bin/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
373	sed s+"mpicc -cc=\$(SCC)"+"/usr/lib64/openmpi/1.4.3-pgfgcc/bin/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
374	else
375	#sed s+"mpif90"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
376	#sed s+"mpicc"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
377	#### OPENMPI
378	sed s+"mpif90 -f90=\$(SFC)"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
379	sed s+"mpicc -cc=\$(SCC)"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
380	fi
381	sed s+"-fastsse"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
382	### pas forcement necessaire ici mais OK
383	sed s+"-llmd"+"-llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
384	\rm conf > /dev/null ;;
385
386	lesmpifort_64) ## MPI (dm) 64 bits IFORT
387	\rm conf > /dev/null 2> /dev/null ; touch conf ; echo 7 >> conf ; echo 1 >> conf
388	\rm configure.wrf > /dev/null 2> /dev/null ; ./configure < conf > /dev/null 2> /dev/null
389	if [[ "${phys}" != "void" ]]
390	then
391	sed s+"-lnetcdf"+"-lnetcdf -L../$phys/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
392	else
393	sed s+"-lnetcdf"+"-lnetcdf $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
394	fi
395	sed s+"mpif90"+"$WHERE_MPI/mpif90"+g configure.wrf > yeah ; mv -f yeah configure.wrf
396	sed s+"mpicc"+"$WHERE_MPI/mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
397	sed s+"-fastsse"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
398	sed s+"O3"+"O3 -mcmodel=large -shared-intel"+g configure.wrf > yeah ; mv -f yeah configure.wrf
399	#sed s+"-lnetcdf -lnetcdff"+"-lnetcdf -lnetcdff -L../mars_lmd/libo -llmd"+g configure.wrf > yeah ; mv -f yeah configure.wrf
400	if [ ${debug} -ne 0 ] # not working for xlf!
401	then
402	echo 'DEBUG DEBUG DEBUG DEBUG'
403	sed s+"# -g"+" -g -no-ftz -traceback -ftrapuv -fp-stack-check -check"+g configure.wrf > yeah
404	mv -f yeah configure.wrf
405	fi
406	\rm conf > /dev/null ;;
407
408	#######
409	#######LES-specific (WRFV3-based) -- previously in 'makeles'
410
411	#######TEST TEST
412	# GFORTRAN, 64 bits, no nesting
413	gnu_64_single) cd arch ; ln -sf ../configure.defaults.gfortran64 configure.defaults ; cd ..
414	echo 15 \| configure > log_compile 2> log_error
415	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf
416	sed s+"-L../$phys/libo -llmd"+"-L../$phys/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf ;;
417	#######TEST TEST
418	# PGF90, 32 bits, no nesting
419	pgf_32_single) echo 1 \| configure > log_compile 2> log_error
420	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
421	# PGF90, 32 bits, nesting
422	pgf_32_nest) echo 2 \| configure > log_compile 2> log_error
423	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
424	# PGF90, 64 bits, no nesting
425	pgf_64_single) echo 1 \| configure > log_compile 2> log_error
426	#### the following line is necessary because readtesassim has a line "use netcdf" in it!
427	#sed s+"-L../$phys/libo -llmd"+"-L../$phys/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
428	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
429	# PGF90, 64 bits, nesting
430	pgf_64_nest) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
431	echo 4 \| configure > log_compile 2> log_error
432	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
433	# G95, 32 bits, no nesting
434	g95_32_single) echo 13 \| configure > log_compile 2> log_error
435	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
436	# G95, 64 bits, no nesting ### we modify configure.defaults to add x86_64 next to g95 in the header comment
437	g95_64_single) cd arch ; sed s/"PC Linux i486 i586 i686, g95 compiler"/"PC Linux i486 i586 i686 x86_64, g95 compiler"/g configure.defaults > yeahyeahyeah ; rm configure.defaults ; mv yeahyeahyeah configure.defaults ; cd ..
438	echo 14 \| configure > log_compile 2> log_error
439	##### marche pas ....
440	#sed s+"-fno-second-underscore"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
441	#sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf
442	#sed s+"-L../$phys/libo -llmd"+"-L../$phys/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf ;;
443	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf ;;
444	#sed s+"= g95"+"= /home/physastro/aspiga/mysoft/g95/g95-install/bin/x86_64-unknown-linux-gnu-g95"+g configure.wrf > yeah ; mv -f yeah configure.wrf;;
445	# IFORT, 64 bits, no nesting
446	ifort_64_single) echo 5 \| configure > log_compile 2> log_error
447	sed s+"-DIFORT_KLUDGE"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
448	if [ ${debug} -ne 0 ] # not working for xlf!
449	then
450	echo 'DEBUG DEBUG DEBUG DEBUG'
451	sed s+"# -g"+" -g -no-ftz -traceback -ftrapuv -fp-stack-check -check"+g configure.wrf > yeah
452	mv -f yeah configure.wrf
453	fi
454	## !!! NETCDF must be defined
455	sed s+"lio_grib_share"+"lio_grib_share -L../$phys/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah
456	mv -f yeah configure.wrf ;;
457	mpifort_64) # MPI+IFORT, 64 bits, no nesting / nesting
458	echo 9 \| configure > log_compile 2> log_error
459	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf
460	sed s+"-f90=ifort"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
461	sed s+"-cc=icc"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
462	sed s+"-DIFORT_KLUDGE"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
463	sed s+"-O1"+"-O1 -mcmodel=medium -shared-intel"+g configure.wrf > yeah ; mv -f yeah configure.wrf
464	sed s+"-O2"+"-O2 -mcmodel=medium -shared-intel"+g configure.wrf > yeah ; mv -f yeah configure.wrf
465	sed s+"-O3"+"-O3 -mcmodel=medium -shared-intel"+g configure.wrf > yeah ; mv -f yeah configure.wrf
466	if [ ${debug} -ne 0 ] # not working for xlf!
467	then
468	echo 'DEBUG DEBUG DEBUG DEBUG'
469	sed s+"# -g"+" -g -no-ftz -traceback -ftrapuv -fp-stack-check -check"+g configure.wrf > yeah
470	mv -f yeah configure.wrf
471	fi
472	sed s+"O3"+"O2"+g configure.wrf > yeah ; mv -f yeah configure.wrf
473	#sed s+"O3"+"O0"+g configure.wrf > yeah ; mv -f yeah configure.wrf ### pour compilation rapide
474	#-w -ftz -align all -fno-alias -fp-model precise >>> options indiquees dans WRF3
475	#http://software.intel.com/en-us/articles/performance-tools-for-software-developers-building-wrf-with-the-intel-compilers/
476	#### NB: RSL is replaced by RSL_LITE, better memory capacity, less seg fault
477	sed s+"../external/RSL/RSL"+"../external/RSL_LITE"+g configure.wrf > yeah ; mv -f yeah configure.wrf
478	sed s+"-DWRF_RSL_IO"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
479	sed s+"-DRSL"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
480	sed s+"librsl.a"+"librsl_lite.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
481	sed s+"../external/RSL/gen"+"../external/RSL_LITE/gen"+g configure.wrf > yeah ; mv -f yeah configure.wrf
482	sed s+"../external/RSL/module"+"../external/RSL_LITE/module"+g configure.wrf > yeah ; mv -f yeah configure.wrf
483	sed s+"-lrsl"+"-lrsl_lite"+g configure.wrf > yeah ; mv -f yeah configure.wrf
484	sed s+"linux"+" "+g configure.wrf > yeah ; mv -f yeah configure.wrf
485	### necessary even if mpi-selector is used (no need in makegcm though)
486	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g > yeah ; mv -f yeah configure.wrf
487	sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g configure.wrf > yeah ; mv -f yeah configure.wrf
488	## !!! NETCDF must be defined
489	sed s+"-L../$phys/libo -llmd"+"-L../$phys/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah
490	mv -f yeah configure.wrf
491	#### POUR LE TRAITEMENT PARTICULIERS des NESTS sur iDATAPLEX [cf. module_lmd_driver]
492	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DSPECIAL_NEST_SAVE "+g configure.wrf > yeah
493	mv -f yeah configure.wrf ;;
494	# MPICH, 64 bits, no nesting / nesting
495	mpi_64) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
496	echo 3 \| configure > log_compile 2> log_error
497	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf
498	### the following line is necessary because readtesassim has a line "use netcdf" in it!
499	sed s+"-L../$phys/libo -llmd"+"-L../$phys/libo -llmd $NETCDF/lib/libnetcdf.a"+g configure.wrf > yeah ; mv -f yeah configure.wrf
500	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g > yeah
501	#sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT -w -O3"+g > yeah
502	#\| sed s+"fastsse"+"fast"+g > yeah
503	mv -f yeah configure.wrf ;;
504	# #sed s+"-fastsse"+"-O2 -Munroll -Mcache_align"+g configure.wrf > yeah
505	# ##sed s+"-fastsse"+"-O2 -fpic"+g configure.wrf > yeah ## marche pas, ILM problem
506	# ##sed s+"-fastsse"+"-mcmodel=medium -Mlarge_arrays"+g configure.wrf > yeah ## marche pas, ILM problem
507	#sed s+"-fastsse"+"-O3 -tp=nehalem-64 -fastsse -Mscalarsse -Mvect=sse -Mipa=fast"+g configure.wrf > yeah
508	#sed s+"-fastsse"+"-O2 -Munroll -Mcache_align"+g configure.wrf > yeah
509	#sed s+"-fastsse"+""+g configure.wrf > yeah
510	#sed s+"-fastsse"+"-fast"+g configure.wrf > yeah
511	#sed s+"-fastsse"+"-Mvect=noaltcode -Msmartalloc -Mprefetch=distance:8 -Mfprelaxed"+g configure.wrf > yeah
512	#mv -f yeah configure.wrf ;;
513	# MPICH, 64 bits, OK with periodic BC but no positive definite
514	mpi_64_test) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
515	echo 2 \| configure > log_compile 2> log_error
516	sed -f physics.sed configure.wrf > yeah ; mv -f yeah configure.wrf
517	sed s+"mpif90"+"${WHERE_MPI}/mpif90"+g configure.wrf \| sed s+"mpicc"+"${WHERE_MPI}/mpicc"+g \| sed s+"mpicc"+"mpicc -DMPI2_SUPPORT"+g > yeah
518	mv -f yeah configure.wrf ;;
519	# XLF+MPICH on AIX machine (64 bits) with nesting, NB: the 32bits notice is not to be considered
520	mpixlf_32) cd arch ; ln -sf ../configure.defaults.fix64nest configure.defaults ; cd ..
521	echo 3 \| configure > log_compile 2> log_error
522	sed -f physics.sed configure.wrf > yeah
523	mv -f yeah configure.wrf ;;
524	# ANYTHING ELSE
525	*) echo NO PRESETS ...
526	if [ ${donotallow} -eq 0 ]
527	then
528	configure
529	else
530	# problem when an input file is used
531	echo 'please cd to '$PWD' and type ./configure'
532	exit
533	fi ;;
534	esac
535	########################
536
537
538	### here a case structure would be great
539
540	if [[ "${phys}" == "new" ]]
541	then
542	if [[ "${config}" == "les" ]] ### LES is different because of WRFV3
543	then
544	sed s+"ARCH_LOCAL = "+"ARCH_LOCAL = -DNEWPHYS "+g configure.wrf > yeah
545	else
546	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DNEWPHYS "+g configure.wrf > yeah
547	fi
548	mv -f yeah configure.wrf
549	fi
550
551	### SCENARIO SCENARIO SCENARIO
552	if [[ ! ("${scenario}" == "") ]] ### not supported with LES for the moment?
553	then
554	# precompiling flag in WRF part
555	sed s+"ARCHFLAGS = "+"ARCHFLAGS = -D${scenario} "+g configure.wrf > yeah
556	mv -f yeah configure.wrf
557	# precompiling flag in LMD part
558	cd $phys
559	cp -Lrf makegcm_${compilo} yeah
560	\rm makegcm_${compilo}
561	sed s+"-DMESOSCALE"+"-D${scenario} -DMESOSCALE"+ yeah > makegcm_${compilo}
562	chmod 755 makegcm_${compilo}
563	\rm yeah
564	cd ..
565	fi
566
567	################
568	#if [[ "${phys}" == "nophys_" ]]
569	#then
570	# if [[ "${config}" == "les" ]] ### LES is different because of WRFV3
571	# then
572	# sed s+"ARCH_LOCAL = "+"ARCH_LOCAL = -DNOPHYS "+g configure.wrf > yeah ; mv -f yeah configure.wrf
573	# sed s+"-L../$phys/libo -llmd"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
574	# else
575	# ### not tested yet but should be working
576	# echo CAUTION CAUTION CAUTION NOT FULLY TESTED
577	# sed s+"ARCHFLAGS = "+"ARCHFLAGS = -DNOPHYS "+g configure.wrf > yeah ; mv -f yeah configure.wrf
578	# sed s+"-L../$phys/libo -llmd"+""+g configure.wrf > yeah ; mv -f yeah configure.wrf
579	# fi
580	#fi
581	################
582
583	if [[ "${phys}" == "venus" ]]
584	then
585	sed s+"LIB_BUNDLED = "+"LIB_BUNDLED = /usr/lib64/liblapack.so \ "+g configure.wrf > yeah ; mv -f yeah configure.wrf
586	#sed s+"RWORDSIZE = "+"RWORDSIZE = 8 # "+g configure.wrf > yeah ; mv -f yeah configure.wrf
587	#sed s+"-DLWORDSIZE=4 "+"-DLWORDSIZE=8 "+g configure.wrf > yeah ; mv -f yeah configure.wrf
588	#sed s+"-DIWORDSIZE=4 "+"-DIWORDSIZE=8 "+g configure.wrf > yeah ; mv -f yeah configure.wrf
589	#sed s+"FCBASEOPTS ="+"FCBASEOPTS = -r8 "+g configure.wrf > yeah ; mv -f yeah configure.wrf
590	#sed s+"-fp-model precise "+"-fpconstant -fp-model precise "+g configure.wrf > yeah ; mv -f yeah configure.wrf
591	fi
592
593	if [ ${debug} -ne 0 ] # not working for xlf!
594	then
595	echo 'DEBUG DEBUG DEBUG DEBUG'
596	sed s+"# -g"+" -g -no-ftz -traceback -ftrapuv -fp-stack-check -check"+g configure.wrf > yeah
597	#sed s+"# -g"+"-g -Ktrap=fp -Mbounds"+g configure.wrf > yeah
598	#sed s+"# -g"+"-g"+g configure.wrf > yeah
599	mv -f yeah configure.wrf
600	fi
601
602	if [[ "${phys}" == "prescribed" ]]
603	then
604	donotcompilephys=1
605	fi
606
607	#exit
608	##################################################
609	# compile physics
610	##################################################
611	if [ ${donotcompilephys} -eq 0 ] #\|\| [[ "${phys}" != "prescribed" ]]
612	then
613
614	cd $phys/
615
616	if [[ "${phys}" == "new" ]]
617	then
618	divx=1
619	divy=1
620	else
621	# required size
622	#----------------
623	case ${numproc} in
624	1) divx=1 ; divy=1 ;;
625	2) divx=1 ; divy=2 ;;
626	4) divx=2 ; divy=2 ;;
627	6) divx=2 ; divy=3 ;;
628	8) divx=2 ; divy=4 ;;
629	12) divx=3 ; divy=4 ;;
630	16) divx=4 ; divy=4 ;;
631	20) divx=4 ; divy=5 ;;
632	24) divx=4 ; divy=6 ;;
633	32) divx=4 ; divy=8 ;;
634	64) divx=8 ; divy=8 ;;
635	128) divx=8 ; divy=16 ;;
636	*) echo not yet supported ; exit ;;
637	esac
638	fi
639	physx=$(expr ${lon} - 1)
640	restex=$(expr ${physx} \% ${divx})
641	physy=$(expr ${lat} - 1)
642	restey=$(expr ${physy} \% ${divy})
643	if [[ ${restex} != 0 \|\| ${restey} != 0 ]]
644	then
645	echo nx-1 shall be divided by ${divx}
646	echo ny-1 shall be divided by ${divy}
647	exit
648	fi
649	physx=$(expr ${physx} \/ ${divx})
650	physy=$(expr ${physy} \/ ${divy})
651	physz=$(expr ${level} - 1)
652
653	# change this if you change num_soil_layers in WRF
654	# -- default is 10
655	if [[ "${phys}" == "new" ]]
656	then
657	soilsize=18 ## nouvelle physique. ne sert a rien ici. voir comsoil.
658	else
659	soilsize=10
660	fi
661
662	# GCM environment variables
663	#--------------------------
664	export LMDGCM=$PWD
665	export LIBOGCM=$PWD/libo
666
667	# generate the appropriate dimphys
668	#---------------------------------
669	if [[ "${phys}" == "mars" ]]
670	then
671	cd libf/phymars
672	elif [[ "${phys}" == "venus" ]]
673	then
674	cd libf/phyvenus
675	fi
676	\rm dimphys.h 2> /dev/null
677	# if [[ "${phys}" == "newphys_" ]]
678	# then
679	# ln -sf ../../meso_dimphys.h_ref . ## ne sert plus !!
680	# else
681	if [[ "${phys}" == "mars_lmd" ]]
682	then
683	physize=$(expr ${physx} \* ${physy})
684	sed s/--xsize--/${physx}/g meso_dimphys.h_ref \| sed s/--ysize--/${physy}/g \| sed s/--physize--/${physize}/g \| sed s/--zsize--/${physz}/g \| sed s/--soilsize--/${soilsize}/g > dimphys.h
685	head -15 dimphys.h
686	fi
687	#### TEST new new phys
688	#if [[ "${phys}" == "newphys_" ]]
689	#then
690	# touch gr_fi_dyn.F.lien
691	# ln -sf ../dyn3d/gr_fi_dyn.F . ## dommage, a corriger
692	################################
693	################################
694	################################
695	#fi
696	####
697	####
698	cd ../..
699
700	# prepare for nesting
701	#---------------------
702	cd libf
703	duplicate${dom} 2> /dev/null
704	cd ..
705
706	# compile physics
707	#--------------------------
708	\rm libf/grid/dimensions.h 2> /dev/null
709	\rm -rf libo/* 2> /dev/null
710	echo 1. compiling LMD physics ...
711	echo compilation info in:
712	echo $PWD/libo/log_compile_phys
713
714	if [ ${debug} -ne 0 ]
715	then
716	if [[ "${phys}" == "mars" ]]
717	then
718	echo 'DEBUG DEBUG DEBUG DEBUG'
719	nohup makegcm_${compilo} -debug -full -t ${tra} -p mars -d ${physz} testphys1d \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
720	elif [[ "${phys}" == "venus" ]]
721	then
722	echo 'DEBUG DEBUG DEBUG DEBUG'
723	nohup makelmdz -debug -full -p venus -d 181 rcm1d -arch linux-ifort -cpp MESOSCALE \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
724	fi
725	else
726	if [[ "${phys}" == "mars" ]]
727	then
728	nohup makegcm_${compilo} -t ${tra} -p mars -d ${physz} testphys1d \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
729	elif [[ "${phys}" == "venus" ]]
730	then
731	nohup makelmdz -full -p venus -d 51 rcm1d -arch linux-ifort -cpp MESOSCALE \| tee libo/log_compile_phys \| grep 'warnings' >> libo/log_compile_phys
732	fi
733	fi
734	echo ... done
735	# clean the duplicate routines
736	cd libf
737	duplicate1 2> /dev/null
738	cd ..
739
740	# merge LMD executables in one lib
741	#--------------------------------------
742	cd libo
743	mkdir temp
744	if [[ "${phys}" == "venus" ]]
745	then
746	cp -f linux/.a temp/
747	cp -f ../ioipsl/libioipsl.a temp/
748	else
749	cp -f LINUX/.a temp/
750	fi
751	cd temp
752	if [[ "${phys}" == "mars" ]]
753	then
754	ar x libbibio.a
755	ar x libphymars.a
756	ar x libaeronomars.a
757	else
758	ar x libphyvenus.a
759	ar x libmisc.a
760	ar x libphy_common.a
761	ar x libioipsl.a
762	fi
763	\rm *.a
764	ar r liblmd.a *
765	cp -f liblmd.a ..
766	cd ..
767	\rm -r temp
768	nm liblmd.a > liblmd_content
769	# finish merge
770	cd ..
771	if [[ "${phys}" == "new" ]]
772	then
773	if [[ "${phys}" == "mars" ]]
774	then
775	# include modules for interfacing
776	mv *.mod ../inc/
777	else # [[ "${phys}" == "venus" ]]
778	mv ./libo/linux/.mod ../inc/
779	cp -f ./ioipsl/*.mod ../inc/
780
781	fi
782	fi
783
784
785	# save a copy
786	#--------------
787	cp -f libo/liblmd.a libo/liblmd.a_${lon}_${lat}_${level}_${dom}_${tra}
788	echo '****************************************'
789
790	# ok
791	#----
792	cd ..
793
794	# manage nest includes in module_lmd_driver.F
795	#----
796	cp call_meso_inifis$dom.inc call_meso_inifis.inc
797	cp call_meso_physiq$dom.inc call_meso_physiq.inc
798
799
800	fi
801	##################################################
802	# END compile physics
803	##################################################
804
805	#------------------
806	# compile WRF
807	#------------------
808	if [ ${justphys} -eq 0 ]
809	then
810
811	echo 2. compiling WRF dynamical core ...
812
813	#if [[ "${phys}" == "nophys_" ]]
814	#then
815	# echo 'NO LMD PHYSICS included'
816	#else
817	# if [[ ! ( -f "call_meso_physiq.inc" ) ]]
818	# then
819	# echo 'did you compile the physics ? no call_meso_physiq.inc !'
820	# exit
821	# fi
822	#fi
823
824	# be sure to compile with the most recent physics
825	touch phys/module_lmd_driver.F
826
827	# talk to user
828	echo '>>> compiling ... this may be long ... <<<'
829	echo check progress in:
830	echo $PWD/log_compile
831	echo check possible errors in:
832	echo $PWD/log_error
833
834	# compile ...
835	echo '>>> YOUR CONFIG IS : '${config}
836	case ${config} in
837	'real') ./compile em_real > log_compile 2> log_error
838	# save executables
839	cd main
840	if [[ -f real.exe ]]
841	then
842	echo 'Looks good ! real.exe is here...'
843	fi
844	if [[ -f wrf.exe ]]
845	then
846	echo 'Looks good ! wrf.exe is here...'
847	fi
848	cp -f real.exe ../../real_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}.exe
849	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}.exe
850	cd .. ;;
851	'ideal') #mkdir 'test/em_quarter_ss' 2> /dev/null
852	#echo '>>> YOUR CONFIG IS : '${config}
853	./compile em_quarter_ss > log_compile 2> log_error
854	# save executables
855	cd main
856	if [[ -f ideal.exe ]]
857	then
858	echo 'Looks good ! ideal.exe is here...'
859	fi
860	if [[ -f wrf.exe ]]
861	then
862	echo 'Looks good ! wrf.exe is here...'
863	fi
864	cp -f ideal.exe ../../ideal_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}.exe
865	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}.exe
866	cd .. ;;
867	'les') #echo '>>> YOUR CONFIG IS : '${config}
868	mkdir 'test/em_les' 2> /dev/null
869	./compile em_les > log_compile 2> log_error
870	# save executables
871	cd main
872	if [[ -f ideal.exe ]]
873	then
874	echo 'Looks good ! ideal.exe is here...'
875	fi
876	if [[ -f wrf.exe ]]
877	then
878	echo 'Looks good ! wrf.exe is here...'
879	fi
880	cp -f ideal.exe ../../ideal_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}.exe
881	cp -f wrf.exe ../../wrf_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}.exe
882	cd .. ;;
883	*) echo not supported... please use ; echo ideal les ; exit ;;
884	esac
885	echo '*****last lines from log_error*******'
886	tail -n 20 log_error
887	fi
888
889	# the end
890	echo '****************************************'
891	echo 'done.'
892	echo '****************************************'
893	cp last ../makemeso_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}
894	mv last ../../
895	svn info ../../ > ../makemeso_x${lon}_y${lat}_z${level}_d${dom}_t${tra}_p${numproc}.svn.info
896
897
898
899	# link latest compiled folder as LATEST
900	cd ../../
901	rm -rf LATEST
902	ln -sf ${conf_wrf} LATEST
903
904	# add here specific messages
905	if [[ "${dom}" != "1" ]]
906	then
907	nest=$(expr ${lon} + 4)
908	echo NB: in namelist.input, please set:
909	echo '
910	max_dom = '$dom'
911	s_we = 1,1,
912	e_we = '$lon','$nest',
913	s_sn = 1,1,
914	e_sn = '$lat','$nest',
915	s_vert = 1,1,
916	e_vert = '$level','$level','
917	fi
918
919

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format