Context Navigation

orosetup.F @ 3567

Last change on this file since 3567 was 2047, checked in by slebonnois, 6 years ago
SL: VENUS, ajout des modifs apportees par Thomas Navarro pour la parametrisation des ondes de gravite orographiques
File size: 16.2 KB

Rev	Line
[3]	1	SUBROUTINE orosetup
	2	* ( nlon , nlev , ktest
	3	* , kkcrit, kkcrith, kcrit, ksect , kkhlim
[2047]	4	* , kkenvh, kknu , kknu2, kkbreak
[3]	5	* , paphm1, papm1 , pum1 , pvm1, ptm1, pgeom1, pstab, pstd
	6	* , prho , pri , ptau, pvph, ppsi, pzdep
	7	* , pulow , pvlow
	8	* , ptheta, pgam, pmea, ppic, pval
	9	* , pnu , pd1 , pd2 ,pdmod )
	10	C
	11	c**** gwsetup
	12	c
	13	c purpose.
	14	c --------
	15	c SET-UP THE ESSENTIAL PARAMETERS OF THE SSO DRAG SCHEME:
	16	C DEPTH OF LOW WBLOCKED LAYER, LOW-LEVEL FLOW, BACKGROUND
	17	C STRATIFICATION.....
	18	c
	19	c** interface.
	20	c ----------
	21	c from orodrag
	22	c
	23	c explicit arguments :
	24	c --------------------
	25	c ==== inputs ===
	26	c
	27	c nlon----input-I-Total number of horizontal points that get into physics
	28	c nlev----input-I-Number of vertical levels
	29	c ktest--input-I: Flags to indicate active points
	30	c
	31	c ptsphy--input-R-Time-step (s)
	32	c paphm1--input-R: pressure at model 1/2 layer
	33	c papm1---input-R: pressure at model layer
	34	c pgeom1--input-R: Altitude of layer above ground
	35	c VENUS ATTENTION: CP VARIABLE PSTAB CALCULE EN AMONT DES PARAMETRISATIONS
	36	c pstab-----R-: Brunt-Vaisala freq.^2 at 1/2 layers (input except klev+1)
	37	c ptm1, pum1, pvm1--R-: t, u and v
	38	c pmea----input-R-Mean Orography (m)
	39	C pstd----input-R-SSO standard deviation (m)
	40	c psig----input-R-SSO slope
	41	c pgam----input-R-SSO Anisotropy
	42	c pthe----input-R-SSO Angle
	43	c ppic----input-R-SSO Peacks elevation (m)
	44	c pval----input-R-SSO Valleys elevation (m)
	45
	46	c ==== outputs ===
	47	c pulow, pvlow -output-R: Low-level wind
	48	c kkcrit----I-: Security value for top of low level flow
	49	c kcrit-----I-: Critical level
	50	c ksect-----I-: Not used
	51	c kkhlim----I-: Not used
	52	c kkenvh----I-: Top of blocked flow layer
	53	c kknu------I-: Layer that sees mountain peacks
	54	c kknu2-----I-: Layer that sees mountain peacks above mountain mean
	55	c kknub-----I-: Layer that sees mountain mean above valleys
	56	c prho------R-: Density at 1/2 layers
	57	c pri-------R-: Background Richardson Number, Wind shear measured along GW stress
	58	c pvph------R-: Wind in plan of GW stress, Half levels.
	59	c ppsi------R-: Angle between low level wind and SS0 main axis.
	60	c pd1-------R-\| Compared the ratio of the stress
	61	c pd2-------R-\| that is along the wind to that Normal to it.
	62	c pdi define the plane of low level stress
	63	c compared to the low level wind.
	64	c see p. 108 Lott & Miller (1997).
	65	c pdmod-----R-: Norme of pdi
	66
	67	c === local arrays ===
	68	c
	69	c zvpf------R-: Wind projected in the plan of the low-level stress.
	70
	71	c ==== outputs ===
	72	c
	73	c implicit arguments : none
	74	c --------------------
	75	c
	76	c method.
	77	c -------
	78	c
	79	c
	80	c externals.
	81	c ----------
	82	c
	83	c
	84	c reference.
	85	c ----------
	86	c
	87	c see ecmwf research department documentation of the "i.f.s."
	88	c
	89	c author.
	90	c -------
	91	c
	92	c modifications.
	93	c --------------
	94	c f.lott for the new-gwdrag scheme november 1993
	95	c
	96	c-----------------------------------------------------------------------
[101]	97	use dimphy
[3]	98	implicit none
	99
	100	#include "YOMCST.h"
	101	#include "YOEGWD.h"
	102
	103	c-----------------------------------------------------------------------
	104	c
	105	c* 0.1 arguments
	106	c ---------
	107	c
	108	integer nlon,nlev
	109	integer kkcrit(nlon),kkcrith(nlon),kcrit(nlon),ksect(nlon),
	110	* kkhlim(nlon),ktest(nlon),kkenvh(nlon)
[2047]	111	integer kkbreak(nlon)
[3]	112	c
	113	real paphm1(nlon,klev+1),papm1(nlon,klev),pum1(nlon,klev),
	114	* pvm1(nlon,klev),ptm1(nlon,klev),pgeom1(nlon,klev),
	115	* prho(nlon,klev+1),pri(nlon,klev+1),pstab(nlon,klev+1),
	116	* ptau(nlon,klev+1),pvph(nlon,klev+1),ppsi(nlon,klev+1),
	117	* pzdep(nlon,klev)
	118	real pulow(nlon),pvlow(nlon),ptheta(nlon),pgam(nlon),pnu(nlon),
	119	* pd1(nlon),pd2(nlon),pdmod(nlon)
	120	real pstd(nlon),pmea(nlon),ppic(nlon),pval(nlon)
	121	c
	122	c-----------------------------------------------------------------------
	123	c
	124	c* 0.2 local arrays
	125	c ------------
	126	c
	127	c
	128	integer ilevh ,jl,jk,iii
	129	real zcons1,zhgeo,zu,zphi
	130	real zvt1,zvt2,zdwind,zwind,zdelp
	131	real zstabm,zstabp,zrhom,zrhop
	132	logical lo
	133	logical ll1(klon,klev+1)
	134	integer kknu(klon),kknu2(klon),kknub(klon),kknul(klon),
	135	* kentp(klon),ncount(klon)
	136	c
	137	real zhcrit(klon,klev),zvpf(klon,klev),
	138	* zdp(klon,klev)
	139	real znorm(klon),zb(klon),zc(klon),
	140	* zulow(klon),zvlow(klon),znup(klon),znum(klon)
	141
	142	c ------------------------------------------------------------------
	143	c
	144	c* 1. initialization
	145	c --------------
	146	c
	147	c PRINT *,' in orosetup'
	148	100 continue
	149	c
	150	c ------------------------------------------------------------------
	151	c
	152	c* 1.1 computational constants
	153	c -----------------------
	154	c
	155	110 continue
	156	c
	157	ilevh =klev/3
	158	c
	159	zcons1=1./rd
	160	c
	161	c ------------------------------------------------------------------
	162	c
	163	c* 2.
	164	c --------------
	165	c
	166	200 continue
	167	c
	168	c ------------------------------------------------------------------
	169	c
	170	c* 2.1 define low level wind, project winds in plane of
	171	c* low level wind, determine sector in which to take
	172	c* the variance and set indicator for critical levels.
	173	c
	174	c
	175	c
	176	do 2001 jl=kidia,kfdia
	177	kknu(jl) =klev
	178	kknu2(jl) =klev
	179	kknub(jl) =klev
	180	kknul(jl) =klev
[2047]	181	kkbreak(jl) =klev + 1
[3]	182	pgam(jl) =max(pgam(jl),gtsec)
	183	ll1(jl,klev+1)=.false.
	184	2001 continue
	185	c
	186	c Ajouter une initialisation (L. Li, le 23fev99):
	187	c
	188	do jk=klev,ilevh,-1
	189	do jl=kidia,kfdia
	190	ll1(jl,jk)= .false.
	191	ENDDO
	192	ENDDO
[2047]	193
	194	c VENUS: define break for subcritical stress
	195	c ----------------------------
	196	do jk=klev,ilevh,-1
	197	do jl=kidia,kfdia
	198	if(ktest(jl).eq.1) then
	199	!zhgeo=pgeom1(jl,jk)/rg
	200	!!zhcrit(jl,jk)=ppic(jl)
	201	!zhcrit(jl,jk)=amin1(ppic(jl)-pmea(jl),pmea(jl)-pval(jl))
	202	!ll1(jl,jk)=(zhgeo.gt.zhcrit(jl,jk))
	203	!if(ll1(jl,jk) .neqv. ll1(jl,jk+1)) then
	204	! kkbreak(jl)=jk
	205	!endif
	206
	207	!if (paphm1(jl,jk) .ge. 7.e6) kkbreak(jl)=jk
	208	!kkbreak(jl) = klev - 2 ! gwd1103
	209	!kkbreak(jl) = klev - 4 ! gwd1104
	210	!kkbreak(jl) = klev - 3 ! gwd1105
	211
	212	endif
	213	enddo
	214	enddo
	215
[3]	216	c
	217	c* define top of low level flow
	218	c ----------------------------
	219	do 2002 jk=klev,ilevh,-1
	220	do 2003 jl=kidia,kfdia
	221	if(ktest(jl).eq.1) then
	222	lo=(paphm1(jl,jk)/paphm1(jl,klev+1)).ge.gsigcr
	223	if(lo) then
	224	kkcrit(jl)=jk
	225	endif
	226	zhcrit(jl,jk)=ppic(jl)-pval(jl)
	227	zhgeo=pgeom1(jl,jk)/rg
	228	ll1(jl,jk)=(zhgeo.gt.zhcrit(jl,jk))
	229	C if(ll1(jl,jk).xor.ll1(jl,jk+1)) then
	230	if(ll1(jl,jk).neqv.ll1(jl,jk+1)) then
	231	kknu(jl)=jk
	232	endif
	233	if(.not.ll1(jl,ilevh))kknu(jl)=ilevh
	234	endif
	235	2003 continue
	236	2002 continue
	237	do 2004 jk=klev,ilevh,-1
	238	do 2005 jl=kidia,kfdia
	239	if(ktest(jl).eq.1) then
[2047]	240	! zhcrit(jl,jk)=ppic(jl)-pmea(jl)
[3]	241	zhgeo=pgeom1(jl,jk)/rg
[2047]	242	! ll1(jl,jk)=(zhgeo.gt.zhcrit(jl,jk))
	243	ll1(jl,jk)=(zhgeo.gt.0.5*pstd(jl)) ! TN : do not consider outlier peaks
	244	! ll1(jl,jk)=(zhgeo.gt.pstd(jl)) ! TN : do not consider outlier peaks
	245	! ll1(jl,jk)=(zhgeo.gt.2*pstd(jl)) ! TN : do not consider outlier peaks
[3]	246	if(ll1(jl,jk) .neqv. ll1(jl,jk+1)) then
	247	kknu2(jl)=jk
	248	endif
	249	if(.not.ll1(jl,ilevh))kknu2(jl)=ilevh
	250	endif
	251	2005 continue
	252	2004 continue
[2047]	253
	254	! do 2104 jk=klev,ilevh,-1
	255	! do 2105 jl=kidia,kfdia
	256	! if(ktest(jl).eq.1) then
	257	! zhgeo=pgeom1(jl,jk)/rg
	258	! ll1(jl,jk)=(zhgeo.gt.pstd(jl)) ! TN : do not consider outlier peaks
	259	! if(ll1(jl,jk) .neqv. ll1(jl,jk+1)) then
	260	! kknul(jl)=jk
	261	! endif
	262	! if(.not.ll1(jl,ilevh))kknul(jl)=ilevh
	263	! endif
	264	! 2105 continue
	265	! 2104 continue
	266
	267
[3]	268	do 2006 jk=klev,ilevh,-1
	269	do 2007 jl=kidia,kfdia
	270	if(ktest(jl).eq.1) then
	271	zhcrit(jl,jk)=amin1(ppic(jl)-pmea(jl),pmea(jl)-pval(jl))
	272	zhgeo=pgeom1(jl,jk)/rg
	273	ll1(jl,jk)=(zhgeo.gt.zhcrit(jl,jk))
	274	c if(ll1(jl,jk).xor.ll1(jl,jk+1)) then
	275	if(ll1(jl,jk).neqv.ll1(jl,jk+1)) then
	276	kknub(jl)=jk
	277	endif
	278	if(.not.ll1(jl,ilevh))kknub(jl)=ilevh
	279	endif
	280	2007 continue
	281	2006 continue
	282	c
	283	do 2010 jl=kidia,kfdia
	284	if(ktest(jl).eq.1) then
	285	kknu(jl)=min(kknu(jl),nktopg)
	286	kknu2(jl)=min(kknu2(jl),nktopg)
	287	kknub(jl)=min(kknub(jl),nktopg)
[2047]	288	! kknul(jl)=klev
[3]	289	endif
	290	2010 continue
	291	c
	292	210 continue
	293	c
	294	cc* initialize various arrays
	295	c
	296	do 2107 jl=kidia,kfdia
	297	prho(jl,klev+1) =0.0
	298	cym correction en attendant mieux
	299	prho(jl,1) =0.0
	300	pstab(jl,klev+1) =0.0
	301	pstab(jl,1) =0.0
	302	pri(jl,klev+1) =9999.0
	303	ppsi(jl,klev+1) =0.0
	304	pri(jl,1) =0.0
	305	pvph(jl,1) =0.0
	306	pvph(jl,klev+1) =0.0
	307	cym correction en attendant mieux
	308	cym pvph(jl,klev) =0.0
	309	pulow(jl) =0.0
	310	pvlow(jl) =0.0
	311	zulow(jl) =0.0
	312	zvlow(jl) =0.0
	313	kkcrith(jl) =klev
	314	kkenvh(jl) =klev
	315	kentp(jl) =klev
	316	kcrit(jl) =1
	317	ncount(jl) =0
	318	ll1(jl,klev+1) =.false.
	319	2107 continue
	320	c
	321	c* define flow density and stratification (rho and N2)
	322	c at semi layers.
	323	c -------------------------------------------------------
	324	c
	325	do 223 jk=klev,2,-1
	326	do 222 jl=kidia,kfdia
	327	if(ktest(jl).eq.1) then
	328	zdp(jl,jk)=papm1(jl,jk)-papm1(jl,jk-1)
	329	prho(jl,jk)=2.paphm1(jl,jk)zcons1/(ptm1(jl,jk)+ptm1(jl,jk-1))
	330	endif
	331	222 continue
	332	223 continue
	333	c print*,"altitude(m)=",pgeom1(kfdia/2,:)
	334	c print*,"pression(Pa)=",papm1(kfdia/2,:)
	335	c
	336	c********************************************************************
	337	c
	338	c* define Low level flow (between ground and peacks-valleys)
	339	c ---------------------------------------------------------
	340	do 2115 jk=klev,ilevh,-1
	341	do 2116 jl=kidia,kfdia
	342	if(ktest(jl).eq.1) then
	343	if(jk.ge.kknu2(jl).and.jk.le.kknul(jl)) then
	344	pulow(jl)=pulow(jl)+pum1(jl,jk)*(paphm1(jl,jk+1)-paphm1(jl,jk))
	345	pvlow(jl)=pvlow(jl)+pvm1(jl,jk)*(paphm1(jl,jk+1)-paphm1(jl,jk))
	346	pstab(jl,klev+1)=pstab(jl,klev+1)
	347	c +pstab(jl,jk)*(paphm1(jl,jk+1)-paphm1(jl,jk))
	348	prho(jl,klev+1)=prho(jl,klev+1)
	349	c +prho(jl,jk)*(paphm1(jl,jk+1)-paphm1(jl,jk))
	350	end if
	351	endif
	352	2116 continue
	353	2115 continue
	354	do 2110 jl=kidia,kfdia
	355	if(ktest(jl).eq.1) then
	356	pulow(jl)=pulow(jl)/(paphm1(jl,kknul(jl)+1)-paphm1(jl,kknu2(jl)))
	357	pvlow(jl)=pvlow(jl)/(paphm1(jl,kknul(jl)+1)-paphm1(jl,kknu2(jl)))
	358	znorm(jl)=max(sqrt(pulow(jl)2+pvlow(jl)2),gvsec)
	359	pvph(jl,klev+1)=znorm(jl)
	360	pstab(jl,klev+1)=pstab(jl,klev+1)
	361	c /(paphm1(jl,kknul(jl)+1)-paphm1(jl,kknu2(jl)))
	362	prho(jl,klev+1)=prho(jl,klev+1)
	363	c /(paphm1(jl,kknul(jl)+1)-paphm1(jl,kknu2(jl)))
	364	endif
	365	2110 continue
	366
	367	c
	368	c******* setup orography orientation relative to the low level
	369	C wind and define parameters of the Anisotropic wave stress.
	370	c
	371	do 2112 jl=kidia,kfdia
	372	if(ktest(jl).eq.1) then
	373	lo=(pulow(jl).lt.gvsec).and.(pulow(jl).ge.-gvsec)
	374	if(lo) then
	375	zu=pulow(jl)+2.*gvsec
	376	else
	377	zu=pulow(jl)
	378	endif
	379	zphi=atan(pvlow(jl)/zu)
	380	ppsi(jl,klev+1)=ptheta(jl)*rpi/180.-zphi
	381	zb(jl)=1.-0.18pgam(jl)-0.04pgam(jl)**2
	382	zc(jl)=0.48pgam(jl)+0.3pgam(jl)**2
	383	pd1(jl)=zb(jl)-(zb(jl)-zc(jl))(sin(ppsi(jl,klev+1))*2)
	384	pd2(jl)=(zb(jl)-zc(jl))*sin(ppsi(jl,klev+1))
	385	* *cos(ppsi(jl,klev+1))
	386	pdmod(jl)=sqrt(pd1(jl)2+pd2(jl)2)
	387	endif
	388	2112 continue
	389	c
	390	c ********** projet flow in plane of lowlevel stress ***********
	391	C ********** Find critical levels... ***********
	392	c
	393	do 213 jk=1,klev
	394	do 212 jl=kidia,kfdia
	395	if(ktest(jl).eq.1) then
	396	zvt1 =pulow(jl)pum1(jl,jk)+pvlow(jl)pvm1(jl,jk)
	397	zvt2 =-pvlow(jl)pum1(jl,jk)+pulow(jl)pvm1(jl,jk)
	398	zvpf(jl,jk)=(zvt1pd1(jl)+zvt2pd2(jl))/(znorm(jl)*pdmod(jl))
	399	endif
	400	ptau(jl,jk) =0.0
	401	pzdep(jl,jk) =0.0
	402	ppsi(jl,jk) =0.0
	403	ll1(jl,jk) =.false.
	404	212 continue
	405	213 continue
	406	do 215 jk=2,klev
	407	do 214 jl=kidia,kfdia
	408	if(ktest(jl).eq.1) then
	409	zdp(jl,jk)=papm1(jl,jk)-papm1(jl,jk-1)
	410	pvph(jl,jk)=((paphm1(jl,jk)-papm1(jl,jk-1))*zvpf(jl,jk)+
	411	* (papm1(jl,jk)-paphm1(jl,jk))*zvpf(jl,jk-1))
	412	* /zdp(jl,jk)
	413	if(pvph(jl,jk).lt.gvsec) then
	414	pvph(jl,jk)=gvsec
	415	kcrit(jl)=jk
	416	endif
	417	endif
	418	214 continue
	419	215 continue
	420	c
	421	c* 2.3 mean flow richardson number.
	422	c
	423	230 continue
	424	c
	425	do 232 jk=2,klev
	426	do 231 jl=kidia,kfdia
	427	if(ktest(jl).eq.1) then
	428	zdwind=max(abs(zvpf(jl,jk)-zvpf(jl,jk-1)),gvsec)
	429	pri(jl,jk)=pstab(jl,jk)*(zdp(jl,jk)
	430	* /(rgprho(jl,jk)zdwind))**2
	431	pri(jl,jk)=max(pri(jl,jk),grcrit)
	432	endif
	433	231 continue
	434	232 continue
	435
	436	c
	437	c
	438	c* define top of 'envelope' layer
	439	c ----------------------------
	440
	441	do 233 jl=kidia,kfdia
	442	pnu (jl)=0.0
	443	znum(jl)=0.0
	444	233 continue
	445
	446	do 234 jk=2,klev-1
	447	do 234 jl=kidia,kfdia
	448
	449	if(ktest(jl).eq.1) then
	450
	451	if (jk.ge.kknu2(jl)) then
	452
	453	znum(jl)=pnu(jl)
	454	zwind=(pulow(jl)pum1(jl,jk)+pvlow(jl)pvm1(jl,jk))/
	455	* max(sqrt(pulow(jl)2+pvlow(jl)2),gvsec)
	456	zwind=max(sqrt(zwind**2),gvsec)
	457	zdelp=paphm1(jl,jk+1)-paphm1(jl,jk)
	458	zstabm=sqrt(max(pstab(jl,jk ),gssec))
	459	zstabp=sqrt(max(pstab(jl,jk+1),gssec))
	460	zrhom=prho(jl,jk )
	461	zrhop=prho(jl,jk+1)
	462	pnu(jl) = pnu(jl) + (zdelp/rg)*
	463	* ((zstabp/zrhop+zstabm/zrhom)/2.)/zwind
	464	if((znum(jl).le.gfrcrit).and.(pnu(jl).gt.gfrcrit)
	465	* .and.(kkenvh(jl).eq.klev))
	466	* kkenvh(jl)=jk
	467
	468	endif
	469
	470	endif
	471
	472	234 continue
	473
	474	c calculation of a dynamical mixing height for when the waves
	475	C BREAK AT LOW LEVEL: The drag will be repartited over
	476	C a depths that depends on waves vertical wavelength,
	477	C not just between two adjacent model layers.
	478	c of gravity waves:
	479
	480	do 235 jl=kidia,kfdia
	481	znup(jl)=0.0
	482	znum(jl)=0.0
	483	235 continue
	484
	485	do 236 jk=klev-1,2,-1
	486	do 236 jl=kidia,kfdia
	487
	488	if(ktest(jl).eq.1) then
	489
	490	znum(jl)=znup(jl)
	491	zwind=(pulow(jl)pum1(jl,jk)+pvlow(jl)pvm1(jl,jk))/
	492	* max(sqrt(pulow(jl)2+pvlow(jl)2),gvsec)
	493	zwind=max(sqrt(zwind**2),gvsec)
	494	zdelp=paphm1(jl,jk+1)-paphm1(jl,jk)
	495	zstabm=sqrt(max(pstab(jl,jk ),gssec))
	496	zstabp=sqrt(max(pstab(jl,jk+1),gssec))
	497	zrhom=prho(jl,jk )
	498	zrhop=prho(jl,jk+1)
	499	znup(jl) = znup(jl) + (zdelp/rg)*
	500	* ((zstabp/zrhop+zstabm/zrhom)/2.)/zwind
	501	if((znum(jl).le.rpi/4.).and.(znup(jl).gt.rpi/4.)
	502	* .and.(kkcrith(jl).eq.klev))
	503	* kkcrith(jl)=jk
	504
	505	endif
	506
	507	236 continue
	508
	509	do 237 jl=kidia,kfdia
	510	if(ktest(jl).eq.1) then
	511	kkcrith(jl)=max0(kkcrith(jl),ilevh*2)
	512	kkcrith(jl)=max0(kkcrith(jl),kknu(jl))
	513	if(kcrit(jl).ge.kkcrith(jl))kcrit(jl)=1
	514	endif
	515	237 continue
	516	c
	517	c directional info for flow blocking *************************
	518	c
	519	do 251 jk=1,klev
	520	do 252 jl=kidia,kfdia
	521	if(ktest(jl).eq.1) then
	522	lo=(pum1(jl,jk).lt.gvsec).and.(pum1(jl,jk).ge.-gvsec)
	523	if(lo) then
	524	zu=pum1(jl,jk)+2.*gvsec
	525	else
	526	zu=pum1(jl,jk)
	527	endif
	528	zphi=atan(pvm1(jl,jk)/zu)
	529	ppsi(jl,jk)=ptheta(jl)*rpi/180.-zphi
	530	endif
	531	252 continue
	532	251 continue
	533
	534	c forms the vertical 'leakiness' **************************
	535
	536	do 254 jk=ilevh,klev
	537	do 253 jl=kidia,kfdia
	538	if(ktest(jl).eq.1) then
	539	pzdep(jl,jk)=0
	540	if(jk.ge.kkenvh(jl).and.kkenvh(jl).ne.klev) then
	541	pzdep(jl,jk)=(pgeom1(jl,kkenvh(jl) )-pgeom1(jl, jk))/
	542	* (pgeom1(jl,kkenvh(jl) )-pgeom1(jl,klev))
	543	end if
	544	endif
	545	253 continue
	546	254 continue
	547
	548	return
	549	end
	550
	551

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format