Context Navigation

iostart.F90 @ 2952

Last change on this file since 2952 was 2952, checked in by romain.vande, 19 months ago
Mars PCM + newstart + start_archive: Correct writing of variables inertiesoil and fluxgeo following r2919 and r2942 RV
File size: 37.1 KB

Line
1	MODULE iostart
2
3	IMPLICIT NONE
4	PRIVATE
5	INTEGER,SAVE :: nid_start ! NetCDF file identifier for startfi.nc file
6	INTEGER,SAVE :: nid_restart ! NetCDF file identifier for restartfi.nc file
7	LOGICAL,SAVE :: first_time1d=.false.
8
9	! restartfi.nc file dimension identifiers: (see open_restartphy())
10	INTEGER,SAVE :: idim1 ! "index" dimension
11	INTEGER,SAVE :: idim2 ! "physical_points" dimension
12	INTEGER,SAVE :: idim3 ! "subsurface_layers" dimension
13	INTEGER,SAVE :: idim4 ! "nlayer_plus_1" dimension
14	INTEGER,SAVE :: idim5 ! "number_of_advected_fields" dimension
15	INTEGER,SAVE :: idim6 ! "nlayer" dimension
16	INTEGER,SAVE :: idim7 ! "Time" dimension
17	INTEGER,SAVE :: idim8 ! "nslope" dimension
18	INTEGER,SAVE :: idim9 ! "nslope_plus_1" dimension
19	INTEGER,SAVE :: timeindex ! current time index (for time-dependent fields)
20	INTEGER,PARAMETER :: length=100 ! size of tab_cntrl array
21
22	INTERFACE get_field
23	MODULE PROCEDURE Get_field_r1,Get_field_r2,Get_field_r3
24	END INTERFACE get_field
25
26	INTERFACE get_var
27	MODULE PROCEDURE get_var_r0,Get_var_r1,Get_var_r2,Get_var_r3
28	END INTERFACE get_var
29
30	INTERFACE put_field
31	MODULE PROCEDURE put_field_r1,put_field_r2,put_field_r3
32	END INTERFACE put_field
33
34	INTERFACE put_var
35	MODULE PROCEDURE put_var_r0,put_var_r1,put_var_r2,put_var_r3
36	END INTERFACE put_var
37
38	PUBLIC nid_start, length
39	PUBLIC get_field,get_var,put_field,put_var
40	PUBLIC inquire_dimension, inquire_dimension_length
41	PUBLIC inquire_field, inquire_field_ndims
42	PUBLIC open_startphy,close_startphy,open_restartphy,close_restartphy
43
44	CONTAINS
45
46	SUBROUTINE open_startphy(filename)
47	USE netcdf, only: NF90_OPEN, NF90_NOERR, NF90_NOWRITE, nf90_strerror
48	USE mod_phys_lmdz_para, only: is_master, bcast
49	IMPLICIT NONE
50	CHARACTER(LEN=*) :: filename
51	INTEGER :: ierr
52
53	IF (is_master) THEN
54	ierr = NF90_OPEN (filename, NF90_NOWRITE, nid_start)
55	IF (ierr.NE.NF90_NOERR) THEN
56	write(,)'open_startphy: problem opening file '//trim(filename)
57	write(,)trim(nf90_strerror(ierr))
58	CALL abort_physic("open_startphy","Cannot open file",1)
59	ENDIF
60	ENDIF
61
62	CALL bcast(nid_start) ! tell all procs about nid_start
63
64	END SUBROUTINE open_startphy
65
66	SUBROUTINE close_startphy
67	USE netcdf, only: NF90_CLOSE
68	USE mod_phys_lmdz_para, only: is_master
69	IMPLICIT NONE
70	INTEGER :: ierr
71
72	IF (is_master) THEN
73	ierr = NF90_CLOSE (nid_start)
74	ENDIF
75
76	END SUBROUTINE close_startphy
77
78
79	FUNCTION inquire_field(Field_name)
80	! check if a given field is present in the input file
81	USE netcdf, only: NF90_INQ_VARID, NF90_NOERR
82	USE mod_phys_lmdz_para, only: is_master, bcast
83	IMPLICIT NONE
84	CHARACTER(LEN=*),INTENT(IN) :: Field_name
85	LOGICAL :: inquire_field
86	INTEGER :: varid
87	INTEGER :: ierr
88
89	IF (is_master) THEN
90	ierr=NF90_INQ_VARID(nid_start,Field_name,varid)
91	IF (ierr==NF90_NOERR) THEN
92	Inquire_field=.TRUE.
93	ELSE
94	Inquire_field=.FALSE.
95	ENDIF
96	ENDIF
97
98	CALL bcast(inquire_field)
99
100	END FUNCTION inquire_field
101
102
103	FUNCTION inquire_field_ndims(Field_name)
104	! give the number of dimensions of "Field_name" stored in the input file
105	USE netcdf, only: nf90_inq_varid, nf90_inquire_variable, &
106	NF90_NOERR, nf90_strerror
107	USE mod_phys_lmdz_para, only: is_master, bcast
108	IMPLICIT NONE
109	CHARACTER(LEN=*),INTENT(IN) :: Field_name
110	INTEGER :: inquire_field_ndims
111	INTEGER :: varid
112	INTEGER :: ierr
113
114	IF (is_master) THEN
115	ierr=nf90_inq_varid(nid_start,Field_name,varid)
116	ierr=nf90_inquire_variable(nid_start,varid,&
117	ndims=inquire_field_ndims)
118	IF (ierr.NE.NF90_NOERR) THEN
119	write(,)'inquire_field_ndims: problem obtaining ndims of '&
120	//trim(field_name)
121	write(,)trim(nf90_strerror(ierr))
122	CALL abort_physic("inquire_field_ndims","Failed to get ndims",1)
123	ENDIF
124	ENDIF
125
126	CALL bcast(inquire_field_ndims)
127
128	END FUNCTION inquire_field_ndims
129
130
131	FUNCTION inquire_dimension(Field_name)
132	! check if a given dimension is present in the input file
133	USE netcdf, only: nf90_inq_dimid, NF90_NOERR
134	USE mod_phys_lmdz_para, only: is_master, bcast
135	IMPLICIT NONE
136	CHARACTER(LEN=*),INTENT(IN) :: Field_name
137	LOGICAL :: inquire_dimension
138	INTEGER :: varid
139	INTEGER :: ierr
140
141	IF (is_master) THEN
142	ierr=NF90_INQ_DIMID(nid_start,Field_name,varid)
143	IF (ierr==NF90_NOERR) THEN
144	Inquire_dimension=.TRUE.
145	ELSE
146	Inquire_dimension=.FALSE.
147	ENDIF
148	ENDIF
149
150	CALL bcast(inquire_dimension)
151
152	END FUNCTION inquire_dimension
153
154	FUNCTION inquire_dimension_length(Field_name)
155	! give the length of the "Field_name" dimension stored in the input file
156	USE netcdf, only: nf90_inquire_dimension, nf90_inq_dimid, &
157	NF90_NOERR, nf90_strerror
158	USE mod_phys_lmdz_para, only: is_master, bcast
159	IMPLICIT NONE
160	CHARACTER(LEN=*),INTENT(IN) :: Field_name
161	INTEGER :: inquire_dimension_length
162	INTEGER :: varid
163	INTEGER :: ierr
164
165	IF (is_master) THEN
166	ierr=nf90_inq_dimid(nid_start,Field_name,varid)
167	ierr=nf90_inquire_dimension(nid_start,varid,&
168	len=inquire_dimension_length)
169	IF (ierr.NE.NF90_NOERR) THEN
170	write(,)'inquire_field_length: problem obtaining length of '&
171	//trim(field_name)
172	write(,)trim(nf90_strerror(ierr))
173	CALL abort_physic("inquire_field_ndims","Failed to get length",1)
174	ENDIF
175	ENDIF
176
177	CALL bcast(inquire_dimension_length)
178
179	END FUNCTION inquire_dimension_length
180
181
182
183	SUBROUTINE Get_Field_r1(field_name,field,found,timeindex)
184	! For a surface field
185	use mod_grid_phy_lmdz, only: klon_glo ! number of atmospheric columns (full grid)
186	IMPLICIT NONE
187	CHARACTER(LEN=*),INTENT(IN) :: Field_name
188	REAL,INTENT(INOUT) :: Field(:)
189	LOGICAL,INTENT(OUT),OPTIONAL :: found
190	INTEGER,INTENT(IN),OPTIONAL :: timeindex ! time index of sought data
191
192	integer :: edges(4), corners(4)
193
194	edges(1)=klon_glo
195	edges(2:4)=1
196	corners(1:4)=1
197	if (PRESENT(timeindex)) then
198	corners(2)=timeindex
199	endif
200
201	IF (PRESENT(found)) THEN
202	CALL Get_field_rgen(field_name,field,1,corners,edges,found)
203	ELSE
204	CALL Get_field_rgen(field_name,field,1,corners,edges)
205	ENDIF
206
207	END SUBROUTINE Get_Field_r1
208
209	SUBROUTINE Get_Field_r2(field_name,field,found,timeindex)
210	! For a "3D" horizontal-vertical field
211	use mod_grid_phy_lmdz, only: klon_glo ! number of atmospheric columns (full grid)
212	IMPLICIT NONE
213	CHARACTER(LEN=*),INTENT(IN) :: Field_name
214	REAL,INTENT(INOUT) :: Field(:,:)
215	LOGICAL,INTENT(OUT),OPTIONAL :: found
216	INTEGER,INTENT(IN),OPTIONAL :: timeindex ! time index of sought data
217
218	integer :: edges(4), corners(4)
219
220	edges(1)=klon_glo
221	edges(2)=size(field,2)
222	edges(3:4)=1
223	corners(1:4)=1
224	if (PRESENT(timeindex)) then
225	corners(3)=timeindex
226	endif
227
228	IF (PRESENT(found)) THEN
229	CALL Get_field_rgen(field_name,field,size(field,2),&
230	corners,edges,found)
231	ELSE
232	CALL Get_field_rgen(field_name,field,size(field,2),&
233	corners,edges)
234	ENDIF
235
236
237	END SUBROUTINE Get_Field_r2
238
239	SUBROUTINE Get_Field_r3(field_name,field,found,timeindex)
240	! for a "4D" field surf/alt/??
241	use mod_grid_phy_lmdz, only: klon_glo ! number of atmospheric columns (full grid)
242	IMPLICIT NONE
243	CHARACTER(LEN=*),INTENT(IN) :: Field_name
244	REAL,INTENT(INOUT) :: Field(:,:,:)
245	LOGICAL,INTENT(OUT),OPTIONAL :: found
246	INTEGER,INTENT(IN),OPTIONAL :: timeindex ! time index of sought data
247
248	integer :: edges(4), corners(4)
249
250	edges(1)=klon_glo
251	edges(2)=size(field,2)
252	edges(3)=size(field,3)
253	edges(4)=1
254	corners(1:4)=1
255	if (PRESENT(timeindex)) then
256	corners(4)=timeindex
257	endif
258
259	IF (PRESENT(found)) THEN
260	CALL Get_field_rgen(field_name,field,size(field,2)*size(field,3),&
261	corners,edges,found)
262	ELSE
263	CALL Get_field_rgen(field_name,field,size(field,2)*size(field,3),&
264	corners,edges)
265	ENDIF
266
267	END SUBROUTINE Get_Field_r3
268
269	SUBROUTINE Get_field_rgen(field_name,field,field_size, &
270	corners,edges,found)
271	USE netcdf
272	USE dimphy
273	USE mod_grid_phy_lmdz
274	USE mod_phys_lmdz_para
275	IMPLICIT NONE
276	CHARACTER(LEN=*) :: Field_name
277	INTEGER :: field_size
278	REAL :: field(klon,field_size)
279	INTEGER,INTENT(IN) :: corners(4)
280	INTEGER,INTENT(IN) :: edges(4)
281	LOGICAL,OPTIONAL :: found
282
283	REAL :: field_glo(klon_glo,field_size)
284	LOGICAL :: tmp_found
285	INTEGER :: varid
286	INTEGER :: ierr
287
288	IF (is_master) THEN
289
290	ierr=NF90_INQ_VARID(nid_start,Field_name,varid)
291
292	IF (ierr==NF90_NOERR) THEN
293	CALL body(field_glo)
294	tmp_found=.TRUE.
295	ELSE
296	tmp_found=.FALSE.
297	ENDIF
298
299	ENDIF
300
301	CALL bcast(tmp_found)
302
303	IF (tmp_found) THEN
304	CALL scatter(field_glo,field)
305	ENDIF
306
307	IF (PRESENT(found)) THEN
308	found=tmp_found
309	ELSE
310	IF (.NOT. tmp_found) THEN
311	PRINT*, 'get_field_rgen: Field <'//field_name//'> not found'
312	CALL abort_physic("get_field_rgen","Failed to get field",1)
313	ENDIF
314	ENDIF
315
316
317	CONTAINS
318
319	SUBROUTINE body(field_glo)
320	REAL :: field_glo(klon_glo*field_size)
321	ierr=NF90_GET_VAR(nid_start,varid,field_glo,corners,edges)
322	IF (ierr/=NF90_NOERR) THEN
323	! La variable exist dans le fichier mais la lecture a echouee.
324	PRINT*, 'get_field_rgen: Failed reading <'//field_name//'>'
325
326	! IF (field_name=='CLWCON' .OR. field_name=='RNEBCON' .OR. field_name=='RATQS') THEN
327	! ! Essaye de lire le variable sur surface uniqument, comme fait avant
328	! field_glo(:)=0.
329	! ierr=NF90_GET_VAR(nid_start,varid,field_glo(1:klon_glo))
330	! IF (ierr/=NF90_NOERR) THEN
331	! PRINT*, 'phyetat0: Lecture echouee aussi en 2D pour <'//field_name//'>'
332	! CALL abort
333	! ELSE
334	! PRINT*, 'phyetat0: La variable <'//field_name//'> lu sur surface seulement'!, selon ancien format, le reste mis a zero'
335	! END IF
336	! ELSE
337	CALL abort_physic("get_field_rgen","Failed to read field",1)
338	! ENDIF
339	ENDIF
340
341	END SUBROUTINE body
342
343	END SUBROUTINE Get_field_rgen
344
345
346	SUBROUTINE get_var_r0(var_name,var,found)
347	! Get a scalar from input file
348	IMPLICIT NONE
349	CHARACTER(LEN=*),INTENT(IN) :: var_name
350	REAL,INTENT(INOUT) :: var
351	LOGICAL,OPTIONAL,INTENT(OUT) :: found
352
353	REAL :: varout(1)
354
355	IF (PRESENT(found)) THEN
356	CALL Get_var_rgen(var_name,varout,size(varout),found)
357	ELSE
358	CALL Get_var_rgen(var_name,varout,size(varout))
359	ENDIF
360	var=varout(1)
361
362	END SUBROUTINE get_var_r0
363
364	SUBROUTINE get_var_r1(var_name,var,found)
365	! Get a vector from input file
366	IMPLICIT NONE
367	CHARACTER(LEN=*),INTENT(IN) :: var_name
368	REAL,INTENT(INOUT) :: var(:)
369	LOGICAL,OPTIONAL,INTENT(OUT) :: found
370
371	IF (PRESENT(found)) THEN
372	CALL Get_var_rgen(var_name,var,size(var),found)
373	ELSE
374	CALL Get_var_rgen(var_name,var,size(var))
375	ENDIF
376
377	END SUBROUTINE get_var_r1
378
379	SUBROUTINE get_var_r2(var_name,var,found)
380	! Get a 2D field from input file
381	IMPLICIT NONE
382	CHARACTER(LEN=*),INTENT(IN) :: var_name
383	REAL,INTENT(OUT) :: var(:,:)
384	LOGICAL,OPTIONAL,INTENT(OUT) :: found
385
386	IF (PRESENT(found)) THEN
387	CALL Get_var_rgen(var_name,var,size(var),found)
388	ELSE
389	CALL Get_var_rgen(var_name,var,size(var))
390	ENDIF
391
392	END SUBROUTINE get_var_r2
393
394	SUBROUTINE get_var_r3(var_name,var,found)
395	! Get a 3D field frominput file
396	IMPLICIT NONE
397	CHARACTER(LEN=*),INTENT(IN) :: var_name
398	REAL,INTENT(INOUT) :: var(:,:,:)
399	LOGICAL,OPTIONAL,INTENT(OUT) :: found
400
401	IF (PRESENT(found)) THEN
402	CALL Get_var_rgen(var_name,var,size(var),found)
403	ELSE
404	CALL Get_var_rgen(var_name,var,size(var))
405	ENDIF
406
407	END SUBROUTINE get_var_r3
408
409	SUBROUTINE Get_var_rgen(var_name,var,var_size,found)
410	USE netcdf
411	USE dimphy
412	USE mod_grid_phy_lmdz
413	USE mod_phys_lmdz_para
414	IMPLICIT NONE
415	CHARACTER(LEN=*) :: var_name
416	INTEGER :: var_size
417	REAL :: var(var_size)
418	LOGICAL,OPTIONAL :: found
419
420	LOGICAL :: tmp_found
421	INTEGER :: varid
422	INTEGER :: ierr
423
424	IF (is_mpi_root .AND. is_omp_root) THEN
425
426	ierr=NF90_INQ_VARID(nid_start,var_name,varid)
427	IF (ierr==NF90_NOERR) THEN
428	ierr=NF90_GET_VAR(nid_start,varid,var)
429	IF (ierr/=NF90_NOERR) THEN
430	PRINT*, 'phyetat0: Failed loading <'//trim(var_name)//'>'
431	CALL abort_physic("get_var_rgen","Failed to read variable",1)
432	ENDIF
433	tmp_found=.TRUE.
434	ELSE
435	tmp_found=.FALSE.
436	ENDIF
437
438	ENDIF
439
440	CALL bcast(tmp_found)
441
442	IF (tmp_found) THEN
443	CALL bcast(var)
444	ENDIF
445
446	IF (PRESENT(found)) THEN
447	found=tmp_found
448	ELSE
449	IF (.NOT. tmp_found) THEN
450	PRINT*, 'phyetat0: Variable <'//trim(var_name)//'> not found'
451	CALL abort_physic("get_var_rgen","Failed to read variable",1)
452	ENDIF
453	ENDIF
454
455	END SUBROUTINE Get_var_rgen
456
457	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
458
459	SUBROUTINE open_restartphy(filename)
460	USE netcdf, only: NF90_CREATE, NF90_CLOBBER, NF90_64BIT_OFFSET, &
461	NF90_NOERR, nf90_strerror, &
462	NF90_PUT_ATT, NF90_GLOBAL, NF90_DEF_DIM, &
463	NF90_UNLIMITED, NF90_ENDDEF, &
464	NF90_WRITE, NF90_OPEN
465	USE mod_phys_lmdz_para, only: is_master
466	USE mod_grid_phy_lmdz, only: klon_glo
467	USE dimphy, only: klev, klevp1
468	USE tracer_mod, only: nqmx
469	USE comsoil_h, only: nsoilmx
470	USE comslope_mod, only: nslope
471	IMPLICIT NONE
472	CHARACTER(LEN=*),INTENT(IN) :: filename
473	INTEGER :: ierr
474	LOGICAL,SAVE :: already_created=.false.
475	LOGICAL,SAVE :: already_created_restarfi_1d=.false.
476
477	if(klon_glo.eq.1 .and. filename.eq."restartfi.nc" .and. .not.already_created_restarfi_1d) then
478	already_created=.false.
479	already_created_restarfi_1d=.true.
480	first_time1d=.true.
481	endif
482
483	IF (is_master) THEN
484	if (.not.already_created) then
485	! At the very first call, create the file
486	ierr=NF90_CREATE(filename,IOR(NF90_CLOBBER,NF90_64BIT_OFFSET), &
487	nid_restart)
488	IF (ierr/=NF90_NOERR) THEN
489	write(,)'open_restartphy: problem creating file '//trim(filename)
490	write(,)trim(nf90_strerror(ierr))
491	CALL abort_physic("open_restartphy","Failed creating file",1)
492	ENDIF
493	already_created=.true.
494	else
495	! Just open the file
496	ierr=NF90_OPEN(filename,NF90_WRITE,nid_restart)
497	IF (ierr/=NF90_NOERR) THEN
498	write(,)'open_restartphy: problem opening file '//trim(filename)
499	write(,)trim(nf90_strerror(ierr))
500	CALL abort_physic("open_restartphy","Failed opening file",1)
501	ENDIF
502	return
503	endif ! of if (.not.already_created)
504
505	ierr=NF90_PUT_ATT(nid_restart,NF90_GLOBAL,"title",&
506	"Physics start file")
507	IF (ierr/=NF90_NOERR) THEN
508	write(,)'open_restartphy: problem writing title '
509	write(,)trim(nf90_strerror(ierr))
510	ENDIF
511
512	ierr=NF90_DEF_DIM(nid_restart,"index",length,idim1)
513	IF (ierr/=NF90_NOERR) THEN
514	write(,)'open_restartphy: problem defining index dimension '
515	write(,)trim(nf90_strerror(ierr))
516	CALL abort_physic("open_restartphy","Failed defining index",1)
517	ENDIF
518
519	ierr=NF90_DEF_DIM(nid_restart,"physical_points",klon_glo,idim2)
520	IF (ierr/=NF90_NOERR) THEN
521	write(,)'open_restartphy: problem defining physical_points dimension '
522	write(,)trim(nf90_strerror(ierr))
523	CALL abort_physic("open_restartphy","Failed defining physical_points",1)
524	ENDIF
525
526	ierr=NF90_DEF_DIM(nid_restart,"subsurface_layers",nsoilmx,idim3)
527	IF (ierr/=NF90_NOERR) THEN
528	write(,)'open_restartphy: problem defining subsurface_layers dimension '
529	write(,)trim(nf90_strerror(ierr))
530	CALL abort_physic("open_restartphy","Failed defining subsurface_layers",1)
531	ENDIF
532
533	ierr=NF90_DEF_DIM(nid_restart,"nlayer_plus_1",klevp1,idim4)
534	IF (ierr/=NF90_NOERR) THEN
535	write(,)'open_restartphy: problem defining nlayer_plus_1 dimension '
536	write(,)trim(nf90_strerror(ierr))
537	CALL abort_physic("open_restartphy","Failed defining nlayer_plus_1",1)
538	ENDIF
539
540	if (nqmx.ne.0) then
541	ierr=NF90_DEF_DIM(nid_restart,"number_of_advected_fields",nqmx,idim5)
542	else
543	! pretend nqmx=1 because 0 size implies unlimited dimension for NetCDF
544	ierr=NF90_DEF_DIM(nid_restart,"number_of_advected_fields",1,idim5)
545	endif
546	IF (ierr/=NF90_NOERR) THEN
547	write(,)'open_restartphy: problem defining number_of_advected_fields dimension '
548	write(,)trim(nf90_strerror(ierr))
549	CALL abort_physic("open_restartphy","Failed defining number_of_advected_fields",1)
550	ENDIF
551
552	ierr=NF90_DEF_DIM(nid_restart,"nlayer",klev,idim6)
553	IF (ierr/=NF90_NOERR) THEN
554	write(,)'open_restartphy: problem defining nlayer dimension '
555	write(,)trim(nf90_strerror(ierr))
556	CALL abort_physic("open_restartphy","Failed defining nlayer",1)
557	ENDIF
558
559	ierr=NF90_DEF_DIM(nid_restart,"Time",NF90_UNLIMITED,idim7)
560	IF (ierr/=NF90_NOERR) THEN
561	write(,)'open_restartphy: problem defining Time dimension '
562	write(,)trim(nf90_strerror(ierr))
563	CALL abort_physic("open_restartphy","Failed defining Time",1)
564	ENDIF
565
566	ierr=NF90_DEF_DIM(nid_restart,"nslope",nslope,idim8)
567	IF (ierr/=NF90_NOERR) THEN
568	write(,)'phyredem: problem defining nslope dimension'
569	write(,)trim(nf90_strerror(ierr))
570	CALL ABORT
571	ENDIF
572
573	ierr=NF90_DEF_DIM(nid_restart,"inter_slope",nslope+1,idim9)
574	IF (ierr/=NF90_NOERR) THEN
575	write(,)'phyredem: problem defining inter slope dimension'
576	write(,)trim(nf90_strerror(ierr))
577	CALL ABORT
578	ENDIF
579
580	ierr=NF90_ENDDEF(nid_restart)
581	IF (ierr/=NF90_NOERR) THEN
582	write(,)'open_restartphy: problem ending definition mode '
583	write(,)trim(nf90_strerror(ierr))
584	CALL abort_physic("open_restartphy","Failed ending definition mode",1)
585	ENDIF
586	ENDIF
587
588	END SUBROUTINE open_restartphy
589
590	SUBROUTINE close_restartphy
591	USE netcdf, only: NF90_CLOSE
592	USE mod_phys_lmdz_para, only: is_master
593	IMPLICIT NONE
594	INTEGER :: ierr
595
596	IF (is_master) THEN
597	ierr = NF90_CLOSE (nid_restart)
598	ENDIF
599
600	END SUBROUTINE close_restartphy
601
602	SUBROUTINE put_field_r1(field_name,title,field,time)
603	! For a surface field
604	IMPLICIT NONE
605	CHARACTER(LEN=*),INTENT(IN) :: field_name
606	CHARACTER(LEN=*),INTENT(IN) :: title
607	REAL,INTENT(IN) :: field(:)
608	REAL,OPTIONAL,INTENT(IN) :: time
609
610	IF (present(time)) THEN
611	! if timeindex is present, it is a time-dependent variable
612	CALL put_field_rgen(field_name,title,field,1,time)
613	ELSE
614	CALL put_field_rgen(field_name,title,field,1)
615	ENDIF
616
617	END SUBROUTINE put_field_r1
618
619	SUBROUTINE put_field_r2(field_name,title,field,time)
620	! For a "3D" horizontal-vertical field
621	IMPLICIT NONE
622	CHARACTER(LEN=*),INTENT(IN) :: field_name
623	CHARACTER(LEN=*),INTENT(IN) :: title
624	REAL,INTENT(IN) :: field(:,:)
625	REAL,OPTIONAL,INTENT(IN) :: time
626
627	IF (present(time)) THEN
628	! if timeindex is present, it is a time-dependent variable
629	CALL put_field_rgen(field_name,title,field,size(field,2),time)
630	ELSE
631	CALL put_field_rgen(field_name,title,field,size(field,2))
632	ENDIF
633
634	END SUBROUTINE put_field_r2
635
636	SUBROUTINE put_field_r3(field_name,title,field,time)
637	! For a "4D" field surf/alt/??
638	IMPLICIT NONE
639	CHARACTER(LEN=*),INTENT(IN) :: field_name
640	CHARACTER(LEN=*),INTENT(IN) :: title
641	REAL,INTENT(IN) :: field(:,:,:)
642	REAL,OPTIONAL,INTENT(IN) :: time
643
644	IF (present(time)) THEN
645	! if timeindex is present, it is a time-dependent variable
646	CALL put_field_rgen(field_name,title,field,size(field,2)*size(field,3),&
647	time)
648	ELSE
649	CALL put_field_rgen(field_name,title,field,size(field,2)*size(field,3))
650	ENDIF
651
652	END SUBROUTINE put_field_r3
653
654	SUBROUTINE put_field_rgen(field_name,title,field,field_size,time)
655	USE netcdf
656	USE dimphy
657	USE comsoil_h, only: nsoilmx
658	USE comslope_mod, ONLY: nslope
659	USE mod_grid_phy_lmdz
660	USE mod_phys_lmdz_para
661	IMPLICIT NONE
662	CHARACTER(LEN=*),INTENT(IN) :: field_name
663	CHARACTER(LEN=*),INTENT(IN) :: title
664	INTEGER,INTENT(IN) :: field_size
665	REAL,INTENT(IN) :: field(klon,field_size)
666	REAL,OPTIONAL,INTENT(IN) :: time
667
668	REAL :: field_glo(klon_glo,field_size)
669	REAL :: field_glo_reshape(klon_glo,nsoilmx,nslope,timeindex)
670	INTEGER :: ierr
671	INTEGER :: nvarid
672	INTEGER :: idim
673
674	CALL gather(field,field_glo)
675
676	IF (is_master) THEN
677
678	IF (field_size==1) THEN
679	! input is a 1D "surface field" array
680	if (.not.present(time)) then ! for a time-independent field
681	ierr=NF90_REDEF(nid_restart)
682	#ifdef NC_DOUBLE
683	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
684	(/idim2/),nvarid)
685	#else
686	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
687	(/idim2/),nvarid)
688	#endif
689	if (ierr.ne.NF90_NOERR) then
690	write(,)"put_field_rgen error: failed to define "//trim(field_name)
691	write(,)trim(nf90_strerror(ierr))
692	endif
693	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
694	ierr=NF90_ENDDEF(nid_restart)
695	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo)
696	else
697	! check if the variable has already been defined:
698	ierr=NF90_INQ_VARID(nid_restart,field_name,nvarid)
699	if (ierr/=NF90_NOERR) then ! variable not found, define it
700	ierr=NF90_REDEF(nid_restart)
701	#ifdef NC_DOUBLE
702	if(field_name.eq. "tauscaling" .or. field_name.eq. "totcloudfrac" .or. field_name.eq. "wstar" ) then
703	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
704	(/idim2,idim7/),nvarid)
705	else
706	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
707	(/idim2,idim8,idim7/),nvarid)
708	endif
709	#else
710	if(field_name.eq. "tauscaling" .or. field_name.eq. "totcloudfrac" .or. field_name.eq. "wstar" ) then
711	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
712	(/idim2,idim7/),nvarid)
713	else
714	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
715	(/idim2,idim8,idim7/),nvarid)
716	endif
717	#endif
718	if (ierr.ne.NF90_NOERR) then
719	write(,)"put_field_rgen error: failed to define "//trim(field_name)
720	write(,)trim(nf90_strerror(ierr))
721	endif
722	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
723	ierr=NF90_ENDDEF(nid_restart)
724	endif
725	! Write the variable
726	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo,&
727	start=(/1,timeindex/))
728	endif ! of if (.not.present(timeindex))
729
730	ELSE IF (field_size==klev) THEN
731	! input is a 2D "atmospheric field" array
732	if (.not.present(time)) then ! for a time-independent field
733	ierr=NF90_REDEF(nid_restart)
734	#ifdef NC_DOUBLE
735	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
736	(/idim2,idim6/),nvarid)
737	#else
738	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
739	(/idim2,idim6/),nvarid)
740	#endif
741	if (ierr.ne.NF90_NOERR) then
742	write(,)"put_field_rgen error: failed to define "//trim(field_name)
743	write(,)trim(nf90_strerror(ierr))
744	endif
745	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
746	ierr=NF90_ENDDEF(nid_restart)
747	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo)
748	else
749	! check if the variable has already been defined:
750	ierr=NF90_INQ_VARID(nid_restart,field_name,nvarid)
751	if (ierr/=NF90_NOERR) then ! variable not found, define it
752	ierr=NF90_REDEF(nid_restart)
753	#ifdef NC_DOUBLE
754	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
755	(/idim2,idim6,idim7/),nvarid)
756	#else
757	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
758	(/idim2,idim6,idim7/),nvarid)
759	#endif
760	if (ierr.ne.NF90_NOERR) then
761	write(,)"put_field_rgen error: failed to define "//trim(field_name)
762	write(,)trim(nf90_strerror(ierr))
763	endif
764	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
765	ierr=NF90_ENDDEF(nid_restart)
766	endif
767	! Write the variable
768	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo,&
769	start=(/1,1,timeindex/))
770	endif ! of if (.not.present(time))
771
772	ELSE IF (field_size==klevp1) THEN
773	! input is a 2D "interlayer atmospheric field" array
774	if (.not.present(time)) then ! for a time-independent field
775	ierr=NF90_REDEF(nid_restart)
776	#ifdef NC_DOUBLE
777	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
778	(/idim2,idim4/),nvarid)
779	#else
780	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
781	(/idim2,idim4/),nvarid)
782	#endif
783	if (ierr.ne.NF90_NOERR) then
784	write(,)"put_field_rgen error: failed to define "//trim(field_name)
785	write(,)trim(nf90_strerror(ierr))
786	endif
787	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
788	ierr = NF90_ENDDEF(nid_restart)
789	ierr = NF90_PUT_VAR(nid_restart,nvarid,field_glo)
790	else
791	! check if the variable has already been defined:
792	ierr=NF90_INQ_VARID(nid_restart,field_name,nvarid)
793	if (ierr/=NF90_NOERR) then ! variable not found, define it
794	ierr=NF90_REDEF(nid_restart)
795	#ifdef NC_DOUBLE
796	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
797	(/idim2,idim4,idim7/),nvarid)
798	#else
799	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
800	(/idim2,idim4,idim7/),nvarid)
801	#endif
802	if (ierr.ne.NF90_NOERR) then
803	write(,)"put_field_rgen error: failed to define "//trim(field_name)
804	write(,)trim(nf90_strerror(ierr))
805	endif
806	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
807	ierr=NF90_ENDDEF(nid_restart)
808	endif
809	! Write the variable
810	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo,&
811	start=(/1,1,timeindex/))
812	endif ! of if (.not.present(timeindex))
813
814	ELSE IF (field_size==nsoilmx .or. field_size==nsoilmx*nslope) THEN
815	! input is a 2D "subsurface field" array
816	if (.not.present(time)) then ! for a time-independent field
817	ierr = NF90_REDEF(nid_restart)
818	#ifdef NC_DOUBLE
819	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
820	(/idim2,idim3/),nvarid)
821	#else
822	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
823	(/idim2,idim3/),nvarid)
824	#endif
825	if (ierr.ne.NF90_NOERR) then
826	write(,)"put_field_rgen error: failed to define "//trim(field_name)
827	write(,)trim(nf90_strerror(ierr))
828	endif
829	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
830	ierr = NF90_ENDDEF(nid_restart)
831	ierr = NF90_PUT_VAR(nid_restart,nvarid,field_glo)
832	else
833	! check if the variable has already been defined:
834	ierr=NF90_INQ_VARID(nid_restart,field_name,nvarid)
835	if (ierr/=NF90_NOERR) then ! variable not found, define it
836	ierr=NF90_REDEF(nid_restart)
837	#ifdef NC_DOUBLE
838	if(field_name.eq. "tsoil".or. field_name.eq. "inertiesoil") then
839	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
840	(/idim2,idim3,idim8,idim7/),nvarid)
841	else
842	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
843	(/idim2,idim3,idim7/),nvarid)
844	endif
845	#else
846	if(field_name.eq. "tsoil".or. field_name.eq. "inertiesoil") then
847	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
848	(/idim2,idim3,idim8,idim7/),nvarid)
849	else
850	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
851	(/idim2,idim3,idim7/),nvarid)
852	endif
853	#endif
854	if (ierr.ne.NF90_NOERR) then
855	write(,)"put_field_rgen error: failed to define "//trim(field_name)
856	write(,)trim(nf90_strerror(ierr))
857	endif
858	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
859	ierr=NF90_ENDDEF(nid_restart)
860	endif
861	! Write the variable
862	if(field_name.eq. "tsoil" .or. field_name.eq. "inertiesoil") then
863
864	field_glo_reshape=RESHAPE(field_glo, (/klon_glo, nsoilmx, nslope, timeindex/))
865
866	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo_reshape,&
867	start=(/1,1,1,timeindex/))
868	else
869	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo,&
870	start=(/1,1,timeindex/))
871	endif
872	endif ! of if (.not.present(time))
873
874	ELSE IF (field_size==nslope) THEN
875	! input is a 2D "subsurface field" array
876	if (.not.present(time)) then ! for a time-independent field
877	ierr = NF90_REDEF(nid_restart)
878	#ifdef NC_DOUBLE
879	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
880	(/idim2,idim8/),nvarid)
881	#else
882	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
883	(/idim2,idim8/),nvarid)
884	#endif
885	if (ierr.ne.NF90_NOERR) then
886	write(,)"put_field_rgen error: failed to define"//trim(field_name)
887	write(,)trim(nf90_strerror(ierr))
888	endif
889	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
890	ierr = NF90_ENDDEF(nid_restart)
891	ierr = NF90_PUT_VAR(nid_restart,nvarid,field_glo)
892	else
893	! check if the variable has already been defined:
894	ierr=NF90_INQ_VARID(nid_restart,field_name,nvarid)
895	if (ierr/=NF90_NOERR) then ! variable not found, define it
896	ierr=NF90_REDEF(nid_restart)
897	#ifdef NC_DOUBLE
898	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_DOUBLE,&
899	(/idim2,idim8,idim7/),nvarid)
900	#else
901	ierr=NF90_DEF_VAR(nid_restart,field_name,NF90_FLOAT,&
902	(/idim2,idim8,idim7/),nvarid)
903	#endif
904	if (ierr.ne.NF90_NOERR) then
905	write(,)"put_field_rgen error: failed to define"//trim(field_name)
906	write(,)trim(nf90_strerror(ierr))
907	endif
908	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
909	ierr=NF90_ENDDEF(nid_restart)
910	endif
911	! Write the variable
912	ierr=NF90_PUT_VAR(nid_restart,nvarid,field_glo,&
913	start=(/1,1,timeindex/))
914
915	endif ! of if (.not.present(time))
916
917	ELSE
918	PRINT *, "Error phyredem(put_field_rgen) : wrong dimension for ",trim(field_name)
919	write(,) " field_size =",field_size
920	CALL abort_physic("put_field_rgen","wrong field dimension",1)
921	ENDIF
922
923	! Check the writting of field to file went OK
924	if (ierr.ne.NF90_NOERR) then
925	write(,) " Error phyredem(put_field_rgen) : failed writing ",trim(field_name)
926	write(,)trim(nf90_strerror(ierr))
927	CALL abort_physic("put_field_rgen","Failed writing field",1)
928	endif
929
930	ENDIF ! of IF (is_master)
931
932	END SUBROUTINE put_field_rgen
933
934	SUBROUTINE put_var_r0(var_name,title,var)
935	! Put a scalar in file
936	IMPLICIT NONE
937	CHARACTER(LEN=*),INTENT(IN) :: var_name
938	CHARACTER(LEN=*),INTENT(IN) :: title
939	REAL,INTENT(IN) :: var
940	REAL :: varin(1)
941
942	varin(1)=var
943
944	CALL put_var_rgen(var_name,title,varin,size(varin))
945
946	END SUBROUTINE put_var_r0
947
948
949	SUBROUTINE put_var_r1(var_name,title,var)
950	! Put a vector in file
951	IMPLICIT NONE
952	CHARACTER(LEN=*),INTENT(IN) :: var_name
953	CHARACTER(LEN=*),INTENT(IN) :: title
954	REAL,INTENT(IN) :: var(:)
955
956	CALL put_var_rgen(var_name,title,var,size(var))
957
958	END SUBROUTINE put_var_r1
959
960	SUBROUTINE put_var_r2(var_name,title,var)
961	! Put a 2D field in file
962	IMPLICIT NONE
963	CHARACTER(LEN=*),INTENT(IN) :: var_name
964	CHARACTER(LEN=*),INTENT(IN) :: title
965	REAL,INTENT(IN) :: var(:,:)
966
967	CALL put_var_rgen(var_name,title,var,size(var))
968
969	END SUBROUTINE put_var_r2
970
971	SUBROUTINE put_var_r3(var_name,title,var)
972	! Put a 3D field in file
973	IMPLICIT NONE
974	CHARACTER(LEN=*),INTENT(IN) :: var_name
975	CHARACTER(LEN=*),INTENT(IN) :: title
976	REAL,INTENT(IN) :: var(:,:,:)
977
978	CALL put_var_rgen(var_name,title,var,size(var))
979
980	END SUBROUTINE put_var_r3
981
982	SUBROUTINE put_var_rgen(var_name,title,var,var_size)
983	USE netcdf, only: NF90_REDEF, NF90_DEF_VAR, NF90_ENDDEF, NF90_PUT_VAR, &
984	NF90_FLOAT, NF90_DOUBLE, &
985	NF90_PUT_ATT, NF90_NOERR, nf90_strerror, &
986	nf90_inq_dimid, nf90_inquire_dimension, NF90_INQ_VARID
987	USE comsoil_h, only: nsoilmx
988	USE comslope_mod, only: nslope
989	USE mod_phys_lmdz_para, only: is_master
990	IMPLICIT NONE
991	CHARACTER(LEN=*),INTENT(IN) :: var_name
992	CHARACTER(LEN=*),INTENT(IN) :: title
993	INTEGER,INTENT(IN) :: var_size
994	REAL,INTENT(IN) :: var(var_size)
995
996	INTEGER :: ierr
997	INTEGER :: nvarid
998	INTEGER :: idim1d
999	logical,save :: firsttime=.true.
1000
1001	IF (is_master) THEN
1002
1003	IF (var_name=="Time") THEN
1004	! Very specific case of "Time" variable
1005	if (firsttime .or. first_time1d) then
1006	! Create the "Time variable"
1007	ierr=NF90_REDEF(nid_restart)
1008	#ifdef NC_DOUBLE
1009	ierr=NF90_DEF_VAR(nid_restart,var_name,NF90_DOUBLE,&
1010	(/idim7/),nvarid)
1011	#else
1012	ierr=NF90_DEF_VAR(nid_restart,var_name,NF90_FLOAT,&
1013	(/idim7/),nvarid)
1014	#endif
1015	IF (LEN_TRIM(title) > 0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
1016	ierr=NF90_ENDDEF(nid_restart)
1017	firsttime=.false.
1018	if(first_time1d) first_time1d=.false.
1019	endif
1020	! Append "time" value
1021	! get current length of "Time" dimension
1022	ierr=nf90_inq_dimid(nid_restart,var_name,idim1d)
1023	ierr=nf90_inquire_dimension(nid_restart,idim1d,len=timeindex)
1024	timeindex=timeindex+1
1025	ierr=NF90_INQ_VARID(nid_restart,var_name,nvarid)
1026	ierr=NF90_PUT_VAR(nid_restart,nvarid,var,&
1027	start=(/timeindex/))
1028	IF (ierr/=NF90_NOERR) THEN
1029	write(,)'put_var_rgen: problem writing Time'
1030	write(,)trim(nf90_strerror(ierr))
1031	CALL abort_physic("get_var_rgen","Failed to write Time",1)
1032	ENDIF
1033	return ! nothing left to do
1034	ELSEIF (var_size==length) THEN
1035	! We know it is a "controle" kind of 1D array
1036	idim1d=idim1
1037	ELSEIF (var_size==nsoilmx) THEN
1038	! We know it is an "mlayer" kind of 1D array
1039	idim1d=idim3
1040	ELSEIF (var_size==nslope+1) THEN
1041	! We know it is an "inter slope" kind of 1D array
1042	idim1d=idim9
1043	ELSE
1044	PRINT *, "put_var_rgen error : wrong dimension"
1045	write(,) " var_size =",var_size
1046	CALL abort_physic("get_var_rgen","Wrong variable dimension",1)
1047
1048	ENDIF ! of IF (var_size==length) THEN
1049
1050	! Swich to NetCDF define mode
1051	ierr=NF90_REDEF (nid_restart)
1052	! Define the variable
1053	#ifdef NC_DOUBLE
1054	ierr=NF90_DEF_VAR(nid_restart,var_name,NF90_DOUBLE,(/idim1d/),nvarid)
1055	#else
1056	ierr=NF90_DEF_VAR(nid_restart,var_name,NF90_FLOAT,(/idim1d/),nvarid)
1057	#endif
1058
1059	! Add a "title" attribute
1060	IF (LEN_TRIM(title)>0) ierr=NF90_PUT_ATT(nid_restart,nvarid,"title",title)
1061	! Swich out of define mode
1062	ierr=NF90_ENDDEF(nid_restart)
1063	! Write variable to file
1064	ierr=NF90_PUT_VAR(nid_restart,nvarid,var)
1065	IF (ierr/=NF90_NOERR) THEN
1066	write(,)'put_var_rgen: problem writing '//trim(var_name)
1067	write(,)trim(nf90_strerror(ierr))
1068	CALL abort_physic("put_var_rgen","Failed writing variable",1)
1069	ENDIF
1070	ENDIF ! of IF (is_master)
1071
1072	END SUBROUTINE put_var_rgen
1073
1074	END MODULE iostart

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format