source: trunk/LMDZ.MARS/libf/phymars/iniwrite.F @ 1747

Last change on this file since 1747 was 1621, checked in by emillour, 8 years ago

Further work on full dynamics/physics separation.

LMDZ.COMMON:

  • added phy_common/vertical_layers_mod.F90 to store information on vertical grid. This is where routines in the physics should get the information.
  • The contents of vertical_layers_mod intialized via dynphy_lonlat/inigeomphy_mod.F90.

LMDZ.MARS:

  • physics now completely decoupled from dynamics; the physics package may now be compiled as a library (-libphy option of makelmdz_fcm).
  • created an "ini_tracer_mod" routine in module "tracer_mod" for a cleaner initialization of the later.
  • removed some purely dynamics-related outputs (etot0, zoom parameters, etc.) from diagfi.nc and stats.nc outputs as these informations are not available in the physics.

LMDZ.GENERIC:

  • physics now completely decoupled from dynamics; the physics package may now be compiled as a library (-libphy option of makelmdz_fcm).
  • added nqtot to tracer_h.F90.
  • removed some purely dynamics-related outputs (etot0, zoom parameters, etc.) from diagfi.nc and stats.nc outputs as these informations are not available in the physics.

LMDZ.VENUS:

  • physics now completely decoupled from dynamics; the physics package may now be compiled as a library (-libphy option of makelmdz_fcm).
  • added infotrac_phy.F90 to store information on tracers in the physics. Initialized via iniphysiq.
  • added cpdet_phy_mod.F90 to store t2tpot etc. functions to be used in the physics. Initialized via iniphysiq. IMPORTANT: there are some hard-coded constants! These should match what is in cpdet_mod.F90 in the dynamics.
  • got rid of references to moyzon_mod module within the physics. The required variables (tmoy, plevmoy) are passed to the physics as arguments to physiq.

LMDZ.TITAN:

  • added infotrac_phy.F90 to store information on tracers in the physics. Initialized via iniphysiq.
  • added cpdet_phy_mod.F90 to store t2tpot etc. functions to be used in the physics.
  • Extra work required to completely decouple physics and dynamics: moyzon_mod should be cleaned up and information passed from dynamics to physics as as arguments. Likewise moyzon_ch and moyzon_mu should not be queried from logic_mod (which is in the dynamics).

EM
File size: 11.7 KB
Line 
1      SUBROUTINE iniwrite(nid,idayref,phis,area,nbplon,nbplat)
2
3      use comsoil_h, only: mlayer, nsoilmx
4      USE comcstfi_h, only: g, mugaz, omeg, rad, rcp, pi
5      USE vertical_layers_mod, ONLY: ap,bp,aps,bps,pseudoalt
6!      USE logic_mod, ONLY: fxyhypb,ysinus
7!      USE serre_mod, ONLY: clon,clat,grossismx,grossismy,dzoomx,dzoomy
8      USE time_phylmdz_mod, ONLY: hour_ini, daysec, dtphys
9!      USE ener_mod, ONLY: etot0,ptot0,ztot0,stot0,ang0
10      USE regular_lonlat_mod, ONLY: lon_reg, lat_reg
11      USE mod_grid_phy_lmdz, ONLY: nbp_lon, nbp_lat, nbp_lev
12      IMPLICIT NONE
13
14c=======================================================================
15c
16c   Auteur:  L. Fairhead  ,  P. Le Van, Y. Wanherdrick, F. Forget
17c   -------
18c
19c   Objet:
20c   ------
21c
22c   'Initialize' the diagfi.nc file: write down dimensions as well
23c   as time-independent fields (e.g: geopotential, mesh area, ...)
24c
25c=======================================================================
26c-----------------------------------------------------------------------
27c   Declarations:
28c   -------------
29
30      include "netcdf.inc"
31
32c   Arguments:
33c   ----------
34
35      integer,intent(in) :: nid        ! NetCDF file ID
36      INTEGER*4,intent(in) :: idayref  ! date (initial date for this run)
37      real,intent(in) :: phis(nbplon,nbp_lat) ! surface geopotential
38      real,intent(in) :: area(nbplon,nbp_lat) ! mesh area (m2)
39      integer,intent(in) :: nbplon,nbplat ! sizes of area and phis arrays
40
41c   Local:
42c   ------
43      INTEGER length,l
44      parameter (length = 100)
45      REAL tab_cntrl(length) ! run parameters are stored in this array
46      INTEGER ierr
47      REAl,ALLOCATABLE :: lon_reg_ext(:) ! extended longitudes
48
49      integer :: nvarid,idim_index,idim_rlonv
50      integer :: idim_rlatu,idim_llmp1,idim_llm
51      integer :: idim_nsoilmx ! "subsurface_layers" dimension ID #
52      integer, dimension(2) :: id 
53c-----------------------------------------------------------------------
54
55      IF (nbp_lon*nbp_lat==1) THEN
56        ! 1D model
57        ALLOCATE(lon_reg_ext(1))
58      ELSE
59        ! 3D model
60        ALLOCATE(lon_reg_ext(nbp_lon+1))
61      ENDIF
62
63      DO l=1,length
64         tab_cntrl(l)=0.
65      ENDDO
66      tab_cntrl(1)  = real(nbp_lon)
67      tab_cntrl(2)  = real(nbp_lat-1)
68      tab_cntrl(3)  = real(nbp_lev)
69      tab_cntrl(4)  = real(idayref)
70      tab_cntrl(5)  = rad
71      tab_cntrl(6)  = omeg
72      tab_cntrl(7)  = g
73      tab_cntrl(8)  = mugaz
74      tab_cntrl(9)  = rcp
75      tab_cntrl(10) = daysec
76      tab_cntrl(11) = dtphys
77!      tab_cntrl(12) = etot0
78!      tab_cntrl(13) = ptot0
79!      tab_cntrl(14) = ztot0
80!      tab_cntrl(15) = stot0
81!      tab_cntrl(16) = ang0
82
83      tab_cntrl(27) = hour_ini
84c
85c    ..........    P.Le Van  ( ajout le 8/04/96 )    .........
86c         .....        parametres  pour le zoom          ......   
87!      tab_cntrl(17)  = clon
88!      tab_cntrl(18)  = clat
89!      tab_cntrl(19)  = grossismx
90!      tab_cntrl(20)  = grossismy
91c
92c     .....   ajout  le 6/05/97 et le 15/10/97  .......
93c
94!      IF ( fxyhypb )   THEN
95!        tab_cntrl(21) = 1.
96!        tab_cntrl(22) = dzoomx
97!        tab_cntrl(23) = dzoomy
98!      ELSE
99!        tab_cntrl(21) = 0.
100!        tab_cntrl(22) = dzoomx
101!        tab_cntrl(23) = dzoomy
102!        tab_cntrl(24) = 0.
103!        IF( ysinus )  tab_cntrl(24) = 1.
104!      ENDIF
105
106c    .........................................................
107
108! Define dimensions
109   
110      ierr = NF_REDEF (nid)
111
112      ierr = NF_DEF_DIM (nid, "index", length, idim_index)
113!      ierr = NF_DEF_DIM (nid, "rlonu", iip1, idim_rlonu)
114      ierr = NF_DEF_DIM (nid, "latitude", nbp_lat, idim_rlatu)
115      IF (nbp_lon*nbp_lat==1) THEN
116        ierr = NF_DEF_DIM (nid, "longitude", 1, idim_rlonv)
117      ELSE
118        ierr = NF_DEF_DIM (nid, "longitude", nbp_lon+1, idim_rlonv)
119      ENDIF
120!      ierr = NF_DEF_DIM (nid, "rlatv", jjm, idim_rlatv)
121      ierr = NF_DEF_DIM (nid, "interlayer", (nbp_lev+1), idim_llmp1)
122      ierr = NF_DEF_DIM (nid, "altitude", nbp_lev, idim_llm)
123      ierr = NF_DEF_DIM (nid,"subsurface_layers",nsoilmx,idim_nsoilmx)
124c
125      ierr = NF_ENDDEF(nid)
126
127c  Contol parameters for this run
128      ierr = NF_REDEF (nid)
129#ifdef NC_DOUBLE
130      ierr = NF_DEF_VAR (nid, "controle", NF_DOUBLE, 1,
131     .       idim_index,nvarid)
132#else
133      ierr = NF_DEF_VAR (nid, "controle", NF_FLOAT, 1,
134     .       idim_index,nvarid)
135#endif
136      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"title", 18,
137     .                       "Control parameters")
138      ierr = NF_ENDDEF(nid)
139#ifdef NC_DOUBLE
140      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,tab_cntrl)
141#else
142      ierr = NF_PUT_VAR_REAL (nid,nvarid,tab_cntrl)
143#endif
144
145c --------------------------
146c  longitudes and latitudes
147!
148!      ierr = NF_REDEF (nid)
149!#ifdef NC_DOUBLE
150!      ierr = NF_DEF_VAR (nid, "rlonu", NF_DOUBLE, 1, idim_rlonu,nvarid)
151!#else
152!      ierr = NF_DEF_VAR (nid, "rlonu", NF_FLOAT, 1, idim_rlonu,nvarid)
153!#endif
154!      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"title", 21,
155!     .                       "Longitudes at u nodes")
156!      ierr = NF_ENDDEF(nid)
157!#ifdef NC_DOUBLE
158!      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,rlonu/pi*180)
159!#else
160!      ierr = NF_PUT_VAR_REAL (nid,nvarid,rlonu/pi*180)
161!#endif
162c
163c --------------------------
164      ierr = NF_REDEF (nid)
165#ifdef NC_DOUBLE
166      ierr =NF_DEF_VAR(nid, "latitude", NF_DOUBLE, 1, idim_rlatu,nvarid)
167#else
168      ierr =NF_DEF_VAR (nid, "latitude", NF_FLOAT, 1, idim_rlatu,nvarid)
169#endif
170      ierr =NF_PUT_ATT_TEXT(nid,nvarid,'units',13,"degrees_north")
171      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"long_name", 14,
172     .      "North latitude")
173      ierr = NF_ENDDEF(nid)
174#ifdef NC_DOUBLE
175      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,lat_reg/pi*180)
176#else
177      ierr = NF_PUT_VAR_REAL (nid,nvarid,lat_reg/pi*180)
178#endif
179c
180c --------------------------
181     
182      lon_reg_ext(1:nbp_lon)=lon_reg(1:nbp_lon)
183      IF (nbp_lon*nbp_lat/=1) THEN
184        ! In 3D, add extra redundant point (180 degrees,
185        ! since lon_reg starts at -180)
186        lon_reg_ext(nbp_lon+1)=-lon_reg_ext(1)
187      ENDIF
188
189      ierr = NF_REDEF (nid)
190#ifdef NC_DOUBLE
191      ierr =NF_DEF_VAR(nid,"longitude", NF_DOUBLE, 1, idim_rlonv,nvarid)
192#else
193      ierr = NF_DEF_VAR(nid,"longitude", NF_FLOAT, 1, idim_rlonv,nvarid)
194#endif
195      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"long_name", 14,
196     .      "East longitude")
197      ierr = NF_PUT_ATT_TEXT(nid,nvarid,'units',12,"degrees_east")
198      ierr = NF_ENDDEF(nid)
199#ifdef NC_DOUBLE
200      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,lon_reg_ext/pi*180)
201#else
202      ierr = NF_PUT_VAR_REAL (nid,nvarid,lon_reg_ext/pi*180)
203#endif
204c
205c --------------------------
206      ierr = NF_REDEF (nid)
207#ifdef NC_DOUBLE
208      ierr = NF_DEF_VAR (nid, "altitude", NF_DOUBLE, 1,
209     .       idim_llm,nvarid)
210#else
211      ierr = NF_DEF_VAR (nid, "altitude", NF_FLOAT, 1,
212     .       idim_llm,nvarid)
213#endif
214      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"long_name",10,"pseudo-alt")
215      ierr = NF_PUT_ATT_TEXT (nid,nvarid,'units',2,"km")
216      ierr = NF_PUT_ATT_TEXT (nid,nvarid,'positive',2,"up")
217
218      ierr = NF_ENDDEF(nid)
219#ifdef NC_DOUBLE
220      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,pseudoalt)
221#else
222      ierr = NF_PUT_VAR_REAL (nid,nvarid,pseudoalt)
223#endif
224c
225c --------------------------
226!      ierr = NF_REDEF (nid)
227!#ifdef NC_DOUBLE
228!      ierr = NF_DEF_VAR (nid, "rlatv", NF_DOUBLE, 1, idim_rlatv,nvarid)
229!#else
230!      ierr = NF_DEF_VAR (nid, "rlatv", NF_FLOAT, 1, idim_rlatv,nvarid)
231!#endif
232!      ierr = NF_PUT_ATT_TEXT (nid,nvarid,"title", 20,
233!     .                       "Latitudes at v nodes")
234!      ierr = NF_ENDDEF(nid)
235!#ifdef NC_DOUBLE
236!      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,rlatv/pi*180)
237!#else
238!      ierr = NF_PUT_VAR_REAL (nid,nvarid,rlatv/pi*180)
239!#endif
240c
241c --------------------------
242c  Vertical levels
243      call def_var(nid,"aps","hybrid pressure at midlayers ","Pa",
244     .            1,idim_llm,nvarid,ierr)
245#ifdef NC_DOUBLE
246      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,aps)
247#else
248      ierr = NF_PUT_VAR_REAL (nid,nvarid,aps)
249#endif
250
251      call def_var(nid,"bps","hybrid sigma at midlayers"," ",
252     .            1,idim_llm,nvarid,ierr)
253#ifdef NC_DOUBLE
254      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,bps)
255#else
256      ierr = NF_PUT_VAR_REAL (nid,nvarid,bps)
257#endif
258
259      call def_var(nid,"ap","hybrid pressure at interlayers","Pa",
260     .            1,idim_llmp1,nvarid,ierr)
261#ifdef NC_DOUBLE
262      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,ap)
263#else
264      ierr = NF_PUT_VAR_REAL (nid,nvarid,ap)
265#endif
266
267      call def_var(nid,"bp","hybrid sigma at interlayers"," ",
268     .            1,idim_llmp1,nvarid,ierr)
269#ifdef NC_DOUBLE
270      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,bp)
271#else
272      ierr = NF_PUT_VAR_REAL (nid,nvarid,bp)
273#endif
274
275!-------------------------------
276! (soil) depth variable mlayer() (known from comsoil_h)
277!-------------------------------
278      ierr=NF_REDEF (nid) ! Enter NetCDF (re-)define mode
279      ! define variable
280#ifdef NC_DOUBLE
281      ierr=NF_DEF_VAR(nid,"soildepth",NF_DOUBLE,1,idim_nsoilmx,nvarid)
282#else
283      ierr=NF_DEF_VAR(nid,"soildepth",NF_FLOAT,1,idim_nsoilmx,nvarid)
284#endif
285      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"long_name", 20,
286     .                        "Soil mid-layer depth")
287      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"units",1,"m")
288      ierr=NF_PUT_ATT_TEXT (nid,nvarid,"positive",4,"down")
289      ierr=NF_ENDDEF(nid) ! Leave NetCDF define mode
290      ! write variable
291#ifdef NC_DOUBLE
292      ierr=NF_PUT_VAR_DOUBLE (nid,nvarid,mlayer)
293#else
294      ierr=NF_PUT_VAR_REAL (nid,nvarid,mlayer)
295#endif
296
297c
298c --------------------------
299c  Mesh area and conversion coefficients cov. <-> contra. <--> natural
300
301!      id(1)=idim_rlonu
302!      id(2)=idim_rlatu
303c
304!      ierr = NF_REDEF (nid)
305!#ifdef NC_DOUBLE
306!      ierr = NF_DEF_VAR (nid, "cu", NF_DOUBLE, 2, id,nvarid)
307!#else
308!      ierr = NF_DEF_VAR (nid, "cu", NF_FLOAT, 2, id,nvarid)
309!#endif
310!      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 40,
311!     .             "Conversion coefficients cov <--> natural")
312!      ierr = NF_ENDDEF(nid)
313!#ifdef NC_DOUBLE
314!      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,cu)
315!#else
316!      ierr = NF_PUT_VAR_REAL (nid,nvarid,cu)
317!#endif
318c
319!      id(1)=idim_rlonv
320!      id(2)=idim_rlatv
321c
322c --------------------------
323!      ierr = NF_REDEF (nid)
324!#ifdef NC_DOUBLE
325!      ierr = NF_DEF_VAR (nid, "cv", NF_DOUBLE, 2, id,nvarid)
326!#else
327!      ierr = NF_DEF_VAR (nid, "cv", NF_FLOAT, 2, id,nvarid)
328!#endif
329!      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 40,
330!     .             "Conversion coefficients cov <--> natural")
331!      ierr = NF_ENDDEF(nid)
332!#ifdef NC_DOUBLE
333!      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,cv)
334!#else
335!      ierr = NF_PUT_VAR_REAL (nid,nvarid,cv)
336!#endif
337c
338      id(1)=idim_rlonv
339      id(2)=idim_rlatu
340c
341c --------------------------
342      ierr = NF_REDEF (nid)
343#ifdef NC_DOUBLE
344      ierr = NF_DEF_VAR (nid, "aire", NF_DOUBLE, 2, id,nvarid)
345#else
346      ierr = NF_DEF_VAR (nid, "aire", NF_FLOAT, 2, id,nvarid)
347#endif
348      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 9,
349     .                       "Mesh area")
350      ierr = NF_ENDDEF(nid)
351#ifdef NC_DOUBLE
352      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,area)
353#else
354      ierr = NF_PUT_VAR_REAL (nid,nvarid,area)
355#endif
356c
357c  Surface geopotential
358      id(1)=idim_rlonv
359      id(2)=idim_rlatu
360c
361      ierr = NF_REDEF (nid)
362#ifdef NC_DOUBLE
363      ierr = NF_DEF_VAR (nid, "phisinit", NF_DOUBLE, 2, id,nvarid)
364#else
365      ierr = NF_DEF_VAR (nid, "phisinit", NF_FLOAT, 2, id,nvarid)
366#endif
367      ierr = NF_PUT_ATT_TEXT (nid, nvarid, "title", 27,
368     .                       "Geopotential at the surface")
369      ierr = NF_ENDDEF(nid)
370#ifdef NC_DOUBLE
371      ierr = NF_PUT_VAR_DOUBLE (nid,nvarid,phis)
372#else
373      ierr = NF_PUT_VAR_REAL (nid,nvarid,phis)
374#endif
375c
376
377      write(*,*)'iniwrite: nbp_lon,nbp_lat,nbp_lev,idayref',
378     & nbp_lon,nbp_lat,nbp_lev,idayref
379      write(*,*)'iniwrite: rad,omeg,g,mugaz,rcp',
380     & rad,omeg,g,mugaz,rcp
381      write(*,*)'iniwrite: daysec,dtphys',daysec,dtphys
382
383      END
Note: See TracBrowser for help on using the repository browser.