Context Navigation

testphys1d.F @ 2228

Last change on this file since 2228 was 2228, checked in by jnaar, 5 years ago
[GCM MARS 1D] Adding a new flag 'paleomars' (default false) in 1d GCM in order to use eccentricity and solar longitude of perihelion as input parameters. Added variables : halfaxe, excentric, Lsperi. New routine call_dayperi.F from FF to compute perhelion date from prescribed eccentricity & Lsperi.
File size: 31.7 KB

Line
1
2	PROGRAM testphys1d
3	! to use 'getin'
4	USE ioipsl_getincom, only: getin
5	use dimphy, only : init_dimphy
6	use mod_grid_phy_lmdz, only : regular_lonlat
7	use infotrac, only: nqtot, tname
8	use comsoil_h, only: volcapa, layer, mlayer, inertiedat, nsoilmx
9	use comgeomfi_h, only: sinlat, ini_fillgeom
10	use surfdat_h, only: albedodat, z0_default, emissiv, emisice,
11	& albedice, iceradius, dtemisice, z0,
12	& zmea, zstd, zsig, zgam, zthe, phisfi,
13	& watercaptag, hmons, summit, base
14	use slope_mod, only: theta_sl, psi_sl
15	use phyredem, only: physdem0,physdem1
16	use geometry_mod, only: init_geometry
17	use planete_h, only: year_day, periheli, aphelie, peri_day,
18	& obliquit, emin_turb, lmixmin
19	use comcstfi_h, only: pi, rad, omeg, g, mugaz, rcp, r, cpp
20	use time_phylmdz_mod, only: daysec, dtphys, day_step,
21	& ecritphy, iphysiq
22	use dimradmars_mod, only: tauscaling,tauvis,totcloudfrac
23	use co2cloud_mod, only: mem_Mccn_co2, mem_Mh2o_co2,
24	& mem_Nccn_co2
25	USE comvert_mod, ONLY: ap,bp,aps,bps,pa,preff,sig,
26	& presnivs,pseudoalt,scaleheight
27	USE vertical_layers_mod, ONLY: init_vertical_layers
28	USE logic_mod, ONLY: hybrid
29	use physics_distribution_mod, only: init_physics_distribution
30	use regular_lonlat_mod, only: init_regular_lonlat
31	use mod_interface_dyn_phys, only: init_interface_dyn_phys
32	USE phys_state_var_init_mod, ONLY: phys_state_var_init
33	USE physiq_mod, ONLY: physiq
34	IMPLICIT NONE
35
36	c=======================================================================
37	c subject:
38	c --------
39	c PROGRAM useful to run physical part of the martian GCM in a 1D column
40	c
41	c Can be compiled with a command like (e.g. for 25 layers)
42	c "makegcm -p mars -d 25 testphys1d"
43	c It requires the files "testphys1d.def" "callphys.def"
44	c and a 'run.def' file (containing a "INCLUDEDEF=callphys.def" line)
45	c and a file describing the sigma layers (e.g. "z2sig.def")
46	c
47	c author: Frederic Hourdin, R.Fournier,F.Forget
48	c -------
49	c
50	c update: 12/06/2003 including chemistry (S. Lebonnois)
51	c and water ice (F. Montmessin)
52	c
53	c=======================================================================
54
55	include "dimensions.h"
56	integer, parameter :: ngrid = 1 !(2+(jjm-1)*iim - 1/jjm)
57	integer, parameter :: nlayer = llm
58	!#include "dimradmars.h"
59	!#include "comgeomfi.h"
60	!#include "surfdat.h"
61	!#include "slope.h"
62	!#include "comsoil.h"
63	!#include "comdiurn.h"
64	include "callkeys.h"
65	!#include "comsaison.h"
66	!#include "control.h"
67	include "netcdf.inc"
68	include "comg1d.h"
69	!#include "advtrac.h"
70
71	c --------------------------------------------------------------
72	c Declarations
73	c --------------------------------------------------------------
74	c
75	INTEGER unitstart ! unite d'ecriture de "startfi"
76	INTEGER nlevel,nsoil,ndt
77	INTEGER ilayer,ilevel,isoil,idt,iq
78	LOGICAl firstcall,lastcall
79	c
80	real,parameter :: odpref=610. ! DOD reference pressure (Pa)
81	c
82	INTEGER day0 ! date initial (sol ; =0 a Ls=0)
83	REAL day ! date durant le run
84	REAL time ! time (0<time<1 ; time=0.5 a midi)
85	REAL play(nlayer) ! Pressure at the middle of the layers (Pa)
86	REAL plev(nlayer+1) ! intermediate pressure levels (pa)
87	REAL psurf,tsurf(1)
88	REAL u(nlayer),v(nlayer) ! zonal, meridional wind
89	REAL gru,grv ! prescribed "geostrophic" background wind
90	REAL temp(nlayer) ! temperature at the middle of the layers
91	REAL,ALLOCATABLE :: q(:,:) ! tracer mixing ratio (e.g. kg/kg)
92	REAL,ALLOCATABLE :: qsurf(:) ! tracer surface budget (e.g. kg.m-2)
93	REAL tsoil(nsoilmx) ! subsurface soik temperature (K)
94	REAL co2ice(1) ! co2ice layer (kg.m-2)
95	REAL emis(1) ! surface layer
96	REAL albedo(1,1) ! surface albedo
97	REAL :: wstar(1)=0. ! Thermals vertical velocity
98	REAL q2(nlayer+1) ! Turbulent Kinetic Energy
99	REAL zlay(nlayer) ! altitude estimee dans les couches (km)
100
101	c Physical and dynamical tandencies (e.g. m.s-2, K/s, Pa/s)
102	REAL du(nlayer),dv(nlayer),dtemp(nlayer)
103	REAL dudyn(nlayer),dvdyn(nlayer),dtempdyn(nlayer)
104	REAL dpsurf(1)
105	REAL,ALLOCATABLE :: dq(:,:)
106	REAL,ALLOCATABLE :: dqdyn(:,:)
107
108	c Various intermediate variables
109	INTEGER thermo
110	REAL zls
111	REAL phi(nlayer),h(nlayer),s(nlayer)
112	REAL pks, ptif, w(nlayer)
113	REAL qtotinit,qtot
114	real,allocatable :: mqtot(:)
115	INTEGER ierr, aslun
116	REAL tmp1(0:nlayer),tmp2(0:nlayer)
117	integer :: nq=1 ! number of tracers
118	real :: latitude(1), longitude(1), cell_area(1)
119
120	character*2 str2
121	character (len=7) :: str7
122	character(len=44) :: txt
123
124	c New flag to compute paleo orbital configurations + few variables JN
125	REAL halfaxe, excentric, Lsperi
126	Logical paleomars
127
128	c=======================================================================
129
130	c=======================================================================
131	c INITIALISATION
132	c=======================================================================
133	! initialize "serial/parallel" related stuff
134	! CALL init_phys_lmdz(iim,jjp1,llm,1,(/(jjm-1)*iim+2/))
135	! CALL init_phys_lmdz(1,1,llm,1,(/1/))
136	! call initcomgeomphy
137
138	c ------------------------------------------------------
139	c Prescribed constants to be set here
140	c ------------------------------------------------------
141
142	pi=2.E+0*asin(1.E+0)
143
144	c Mars planetary constants
145	c ----------------------------
146	rad=3397200. ! mars radius (m) ~3397200 m
147	daysec=88775. ! length of a sol (s) ~88775 s
148	omeg=4.*asin(1.)/(daysec) ! rotation rate (rad.s-1)
149	g=3.72 ! gravity (m.s-2) ~3.72
150	mugaz=43.49 ! atmosphere mola mass (g.mol-1) ~43.49
151	rcp=.256793 ! = r/cp ~0.256793
152	r= 8.314511E+0 *1000.E+0/mugaz
153	cpp= r/rcp
154	year_day = 669 ! lenght of year (sols) ~668.6
155	periheli = 206.66 ! minimum sun-mars distance (Mkm) ~206.66
156	aphelie = 249.22 ! maximum sun-mars distance (Mkm) ~249.22
157	halfaxe = 227.94 ! demi-grand axe de l'ellipse
158	peri_day = 485. ! perihelion date (sols since N. Spring)
159	obliquit = 25.2 ! Obliquity (deg) ~25.2
160	excentric = 0.0934 ! Eccentricity (0.0934)
161
162	c Planetary Boundary Layer and Turbulence parameters
163	c --------------------------------------------------
164	z0_default = 1.e-2 ! surface roughness (m) ~0.01
165	emin_turb = 1.e-6 ! minimal turbulent energy ~1.e-8
166	lmixmin = 30 ! mixing length ~100
167
168	c cap properties and surface emissivities
169	c ----------------------------------------------------
170	emissiv= 0.95 ! Bare ground emissivity ~.95
171	emisice(1)=0.95 ! Northern cap emissivity
172	emisice(2)=0.95 ! Southern cap emisssivity
173	albedice(1)=0.5 ! Northern cap albedo
174	albedice(2)=0.5 ! Southern cap albedo
175	iceradius(1) = 100.e-6 ! mean scat radius of CO2 snow (north)
176	iceradius(2) = 100.e-6 ! mean scat radius of CO2 snow (south)
177	dtemisice(1) = 2. ! time scale for snow metamorphism (north)
178	dtemisice(2) = 2. ! time scale for snow metamorphism (south
179
180	c mesh surface (not a very usefull quantity in 1D)
181	c ----------------------------------------------------
182	cell_area(1)=1.E+0
183
184	c ------------------------------------------------------
185	c Loading run parameters from "run.def" file
186	c ------------------------------------------------------
187
188
189	! check if 'run.def' file is around (otherwise reading parameters
190	! from callphys.def via getin() routine won't work.
191	open(99,file='run.def',status='old',form='formatted',
192	& iostat=ierr)
193	if (ierr.ne.0) then
194	write(,) 'Cannot find required file "run.def"'
195	write(,) ' (which should contain some input parameters'
196	write(,) ' along with the following line:'
197	write(,) ' INCLUDEDEF=callphys.def'
198	write(,) ' )'
199	write(,) ' ... might as well stop here ...'
200	stop
201	else
202	close(99)
203	endif
204
205	! check if we are going to run with or without tracers
206	write(,) "Run with or without tracer transport ?"
207	tracer=.false. ! default value
208	call getin("tracer",tracer)
209	write(,) " tracer = ",tracer
210
211	! while we're at it, check if there is a 'traceur.def' file
212	! and process it.
213	if (tracer) then
214	! load tracer names from file 'traceur.def'
215	open(90,file='traceur.def',status='old',form='formatted',
216	& iostat=ierr)
217	if (ierr.ne.0) then
218	write(,) 'Cannot find required file "traceur.def"'
219	write(,) ' If you want to run with tracers, I need it'
220	write(,) ' ... might as well stop here ...'
221	stop
222	else
223	write(,) "testphys1d: Reading file traceur.def"
224	! read number of tracers:
225	read(90,*,iostat=ierr) nq
226	nqtot=nq ! set value of nqtot (in infotrac module) as nq
227	if (ierr.ne.0) then
228	write(,) "testphys1d: error reading number of tracers"
229	write(,) " (first line of traceur.def) "
230	stop
231	endif
232	endif
233	! allocate arrays:
234	allocate(tname(nq))
235	allocate(q(nlayer,nq))
236	allocate(qsurf(nq))
237	allocate(dq(nlayer,nq))
238	allocate(dqdyn(nlayer,nq))
239	allocate(mqtot(nq))
240
241	! read tracer names from file traceur.def
242	do iq=1,nq
243	read(90,*,iostat=ierr) tname(iq)
244	if (ierr.ne.0) then
245	write(,) 'testphys1d: error reading tracer names...'
246	stop
247	endif
248	enddo
249	close(90)
250
251	! initialize tracers here:
252	write(,) "testphys1d: initializing tracers"
253	q(:,:)=0 ! default, set everything to zero
254	qsurf(:)=0
255	! "smarter" initialization of some tracers
256	! (get values from "profile_*" files, if these are available)
257	do iq=1,nq
258	txt=""
259	write(txt,"(a)") tname(iq)
260	write(,)" tracer:",trim(txt)
261	! CO2
262	if (txt.eq."co2") then
263	q(:,iq)=0.95 ! kg /kg of atmosphere
264	qsurf(iq)=0. ! kg/m2 (not used for CO2)
265	! even better, look for a "profile_co2" input file
266	open(91,file='profile_co2',status='old',
267	& form='formatted',iostat=ierr)
268	if (ierr.eq.0) then
269	read(91,*) qsurf(iq)
270	do ilayer=1,nlayer
271	read(91,*) q(ilayer,iq)
272	enddo
273	endif
274	close(91)
275	endif ! of if (txt.eq."co2")
276	! Allow for an initial profile of argon
277	! Can also be used to introduce a decaying tracer
278	! in the 1D (TBD) to study thermals
279	if (txt.eq."ar") then
280	!look for a "profile_ar" input file
281	open(91,file='profile_ar',status='old',
282	& form='formatted',iostat=ierr)
283	if (ierr.eq.0) then
284	read(91,*) qsurf(iq)
285	do ilayer=1,nlayer
286	read(91,*) q(ilayer,iq)
287	enddo
288	else
289	write(,) "No profile_ar file!"
290	endif
291	close(91)
292	endif ! of if (txt.eq."ar")
293
294	! WATER VAPOUR
295	if (txt.eq."h2o_vap") then
296	!look for a "profile_h2o_vap" input file
297	open(91,file='profile_h2o_vap',status='old',
298	& form='formatted',iostat=ierr)
299	if (ierr.eq.0) then
300	read(91,*) qsurf(iq)
301	do ilayer=1,nlayer
302	read(91,*) q(ilayer,iq)
303	enddo
304	else
305	write(,) "No profile_h2o_vap file!"
306	endif
307	close(91)
308	endif ! of if (txt.eq."h2o_ice")
309	! WATER ICE
310	if (txt.eq."h2o_ice") then
311	!look for a "profile_h2o_vap" input file
312	open(91,file='profile_h2o_ice',status='old',
313	& form='formatted',iostat=ierr)
314	if (ierr.eq.0) then
315	read(91,*) qsurf(iq)
316	do ilayer=1,nlayer
317	read(91,*) q(ilayer,iq)
318	enddo
319	else
320	write(,) "No profile_h2o_ice file!"
321	endif
322	close(91)
323	endif ! of if (txt.eq."h2o_ice")
324	! DUST
325	!if (txt(1:4).eq."dust") then
326	! q(:,iq)=0.4 ! kg/kg of atmosphere
327	! qsurf(iq)=100 ! kg/m2
328	!endif
329	! DUST MMR
330	if (txt.eq."dust_mass") then
331	!look for a "profile_dust_mass" input file
332	open(91,file='profile_dust_mass',status='old',
333	& form='formatted',iostat=ierr)
334	if (ierr.eq.0) then
335	read(91,*) qsurf(iq)
336	do ilayer=1,nlayer
337	read(91,*) q(ilayer,iq)
338	! write(,) "l=",ilayer," q(ilayer,iq)=",q(ilayer,iq)
339	enddo
340	else
341	write(,) "No profile_dust_mass file!"
342	endif
343	close(91)
344	endif ! of if (txt.eq."dust_mass")
345	! DUST NUMBER
346	if (txt.eq."dust_number") then
347	!look for a "profile_dust_number" input file
348	open(91,file='profile_dust_number',status='old',
349	& form='formatted',iostat=ierr)
350	if (ierr.eq.0) then
351	read(91,*) qsurf(iq)
352	do ilayer=1,nlayer
353	read(91,*) q(ilayer,iq)
354	enddo
355	else
356	write(,) "No profile_dust_number file!"
357	endif
358	close(91)
359	endif ! of if (txt.eq."dust_number")
360	! NB: some more initializations (chemistry) is done later
361	! CCN MASS
362	if (txt.eq."ccn_mass") then
363	!look for a "profile_ccn_mass" input file
364	open(91,file='profile_ccn_mass',status='old',
365	& form='formatted',iostat=ierr)
366	if (ierr.eq.0) then
367	read(91,*) qsurf(iq)
368	do ilayer=1,nlayer
369	read(91,*) q(ilayer,iq)
370	enddo
371	else
372	write(,) "No profile_ccn_mass file!"
373	endif
374	close(91)
375	endif ! of if (txt.eq."ccn_mass")
376	! CCN NUMBER
377	if (txt.eq."ccn_number") then
378	!look for a "profile_ccn_number" input file
379	open(91,file='profile_ccn_number',status='old',
380	& form='formatted',iostat=ierr)
381	if (ierr.eq.0) then
382	read(91,*) qsurf(iq)
383	do ilayer=1,nlayer
384	read(91,*) q(ilayer,iq)
385	enddo
386	else
387	write(,) "No profile_ccn_number file!"
388	endif
389	close(91)
390	endif ! of if (txt.eq."ccn_number")
391	enddo ! of do iq=1,nq
392
393	else
394	! we still need to set (dummy) tracer number and names for physdem1
395	nq=1
396	nqtot=nq ! set value of nqtot (in infotrac module) as nq
397	! allocate arrays:
398	allocate(tname(nq))
399	allocate(q(nlayer,nq))
400	allocate(qsurf(nq))
401	allocate(dq(nlayer,nq))
402	allocate(dqdyn(nlayer,nq))
403	allocate(mqtot(nq))
404	do iq=1,nq
405	write(str7,'(a1,i2.2)')'t',iq
406	tname(iq)=str7
407	enddo
408	! and just to be clean, also initialize tracers to zero for physdem1
409	q(:,:)=0
410	qsurf(:)=0
411	endif ! of if (tracer)
412
413	!write(,) "testphys1d q", q(1,:)
414	!write(,) "testphys1d qsurf", qsurf
415
416	c Date and local time at beginning of run
417	c ---------------------------------------
418	c Date (in sols since spring solstice) at beginning of run
419	day0 = 0 ! default value for day0
420	write(,) 'Initial date (in martian sols ; =0 at Ls=0)?'
421	call getin("day0",day0)
422	day=float(day0)
423	write(,) " day0 = ",day0
424	c Local time at beginning of run
425	time=0 ! default value for time
426	write(,)'Initial local time (in hours, between 0 and 24)?'
427	call getin("time",time)
428	write(,)" time = ",time
429	time=time/24.E+0 ! convert time (hours) to fraction of sol
430
431	c Discretization (Definition of grid and time steps)
432	c --------------
433	c
434	nlevel=nlayer+1
435	nsoil=nsoilmx
436
437	day_step=48 ! default value for day_step
438	PRINT *,'Number of time steps per sol ?'
439	call getin("day_step",day_step)
440	write(,) " day_step = ",day_step
441
442	ecritphy=day_step ! default value for ecritphy, output every time step
443
444	ndt=10 ! default value for ndt
445	PRINT *,'Number of sols to run ?'
446	call getin("ndt",ndt)
447	write(,) " ndt = ",ndt
448
449	ndt=ndt*day_step
450	dtphys=daysec/day_step
451
452	c Imposed surface pressure
453	c ------------------------------------
454	c
455	psurf=610. ! default value for psurf
456	PRINT *,'Surface pressure (Pa) ?'
457	call getin("psurf",psurf)
458	write(,) " psurf = ",psurf
459	c Reference pressures
460	pa=20. ! transition pressure (for hybrid coord.)
461	preff=610. ! reference surface pressure
462
463	c Aerosol properties
464	c --------------------------------
465	tauvis=0.2 ! default value for tauvis (dust opacity)
466	write(*,'("Reference dust opacity at ",f4.0," Pa ?")')odpref
467	call getin("tauvis",tauvis)
468	write(,) " tauvis = ",tauvis
469
470	c Orbital parameters
471	c ------------------
472	paleomars=.false. ! Default: no water ice reservoir
473	call getin("paleomars",paleomars)
474	if (paleomars==.true.) then
475	write(,) "paleomars=", paleomars
476	write(,) "Orbital parameters from callphys.def"
477	write(,) "Enter eccentricity & Lsperi"
478	print *, 'Martian eccentricity (0<e<1) ?'
479	call getin('excentric ',excentric)
480	write(,)"excentric =",excentric
481	print *, 'Solar longitude of perihelion (0<Ls<360) ?'
482	call getin('Lsperi',Lsperi )
483	write(,)"Lsperi=",Lsperi
484	Lsperi = Lsperi*pi/180.0 ! Put it in rad for peri_day
485	periheli = halfaxe*(1-excentric)
486	aphelie = halfaxe*(1+excentric)
487	call call_dayperi(Lsperi,excentric,peri_day,year_day)
488	write(,) "Corresponding orbital params for GCM"
489	write(,) " periheli = ",periheli
490	write(,) " aphelie = ",aphelie
491	write(,) "date of perihelion (sol)",peri_day
492	else
493	write(,) "paleomars=", paleomars
494	write(,) "Default present-day orbital parameters"
495	write(,) "Unless specified otherwise"
496	print *,'Min. distance Sun-Mars (Mkm)?'
497	call getin("periheli",periheli)
498	write(,) " periheli = ",periheli
499
500	print *,'Max. distance Sun-Mars (Mkm)?'
501	call getin("aphelie",aphelie)
502	write(,) " aphelie = ",aphelie
503
504	print *,'Day of perihelion?'
505	call getin("periday",peri_day)
506	write(,) " periday = ",peri_day
507
508	print *,'Obliquity?'
509	call getin("obliquit",obliquit)
510	write(,) " obliquit = ",obliquit
511	end if
512
513	c latitude/longitude
514	c ------------------
515	latitude(1)=0 ! default value for latitude
516	PRINT *,'latitude (in degrees) ?'
517	call getin("latitude",latitude(1))
518	write(,) " latitude = ",latitude
519	latitude=latitude*pi/180.E+0
520	longitude=0.E+0
521	longitude=longitude*pi/180.E+0
522
523	! some initializations (some of which have already been
524	! done above!) and loads parameters set in callphys.def
525	! and allocates some arrays
526	!Mars possible matter with dtphys in input and include!!!
527	! Initializations below should mimick what is done in iniphysiq for 3D GCM
528	call init_physics_distribution(regular_lonlat,4,
529	& 1,1,1,nlayer,1)
530	call init_interface_dyn_phys
531	call init_regular_lonlat(1,1,longitude,latitude,
532	& (/0.,0./),(/0.,0./))
533	call init_geometry(1,longitude,latitude,
534	& (/0.,0.,0.,0./),(/0.,0.,0.,0./),
535	& cell_area)
536	! Ehouarn: init_vertial_layers called later (because disvert not called yet)
537	! call init_vertical_layers(nlayer,preff,scaleheight,
538	! & ap,bp,aps,bps,presnivs,pseudoalt)
539	call init_dimphy(1,nlayer) ! Initialize dimphy module
540	call phys_state_var_init(1,llm,nq,tname,
541	. day0,time,daysec,dtphys,rad,g,r,cpp)
542	call ini_fillgeom(1,latitude,longitude,(/1.0/))
543	call conf_phys(1,llm,nq)
544
545	! in 1D model physics are called every time step
546	! ovverride iphysiq value that has been set by conf_phys
547	if (iphysiq/=1) then
548	write(,) "testphys1d: setting iphysiq=1"
549	iphysiq=1
550	endif
551
552	c Initialize albedo / soil thermal inertia
553	c ----------------------------------------
554	c
555	albedodat(1)=0.2 ! default value for albedodat
556	PRINT *,'Albedo of bare ground ?'
557	call getin("albedo",albedodat(1))
558	write(,) " albedo = ",albedodat(1)
559	albedo(1,1)=albedodat(1)
560
561	inertiedat(1,1)=400 ! default value for inertiedat
562	PRINT *,'Soil thermal inertia (SI) ?'
563	call getin("inertia",inertiedat(1,1))
564	write(,) " inertia = ",inertiedat(1,1)
565
566	z0(1)=z0_default ! default value for roughness
567	write(,) 'Surface roughness length z0 (m)?'
568	call getin("z0",z0(1))
569	write(,) " z0 = ",z0(1)
570
571	! Initialize local slope parameters (only matters if "callslope"
572	! is .true. in callphys.def)
573	! slope inclination angle (deg) 0: horizontal, 90: vertical
574	theta_sl(1)=0.0 ! default: no inclination
575	call getin("slope_inclination",theta_sl(1))
576	! slope orientation (deg)
577	! 0 == Northward, 90 == Eastward, 180 == Southward, 270 == Westward
578	psi_sl(1)=0.0 ! default value
579	call getin("slope_orientation",psi_sl(1))
580
581	c
582	c for the gravity wave scheme
583	c ---------------------------------
584	c
585	zmea(1)=0.E+0
586	zstd(1)=0.E+0
587	zsig(1)=0.E+0
588	zgam(1)=0.E+0
589	zthe(1)=0.E+0
590	c
591	c for the slope wind scheme
592	c ---------------------------------
593	c
594	hmons(1)=0.E+0
595	PRINT *,'hmons is initialized to ',hmons(1)
596	summit(1)=0.E+0
597	PRINT *,'summit is initialized to ',summit(1)
598	base(1)=0.E+0
599	c
600	c Default values initializing the coefficients calculated later
601	c ---------------------------------
602	c
603	tauscaling(1)=1. ! calculated in aeropacity_mod.F
604	totcloudfrac(1)=1. ! calculated in watercloud_mod.F
605
606	c Specific initializations for "physiq"
607	c -------------------------------------
608	c surface geopotential is not used (or useful) since in 1D
609	c everything is controled by surface pressure
610	phisfi(1)=0.E+0
611
612	c Initialization to take into account prescribed winds
613	c ------------------------------------------------------
614	ptif=2.E+0omegsinlat(1)
615
616	c geostrophic wind
617	gru=10. ! default value for gru
618	PRINT *,'zonal eastward component of the geostrophic wind (m/s) ?'
619	call getin("u",gru)
620	write(,) " u = ",gru
621	grv=0. !default value for grv
622	PRINT *,'meridional northward component of the geostrophic',
623	&' wind (m/s) ?'
624	call getin("v",grv)
625	write(,) " v = ",grv
626
627	c Initialize winds for first time step
628	DO ilayer=1,nlayer
629	u(ilayer)=gru
630	v(ilayer)=grv
631	w(ilayer)=0 ! default: no vertical wind
632	ENDDO
633
634	c Initialize turbulente kinetic energy
635	DO ilevel=1,nlevel
636	q2(ilevel)=0.E+0
637	ENDDO
638
639	c CO2 ice on the surface
640	c -------------------
641	co2ice(1)=0.E+0 ! default value for co2ice
642	PRINT *,'Initial CO2 ice on the surface (kg.m-2)'
643	call getin("co2ice",co2ice)
644	write(,) " co2ice = ",co2ice
645	! Initialization for CO2 clouds (could be improved to read initial profiles)
646	mem_Mccn_co2(:,:)=0
647	mem_Mh2o_co2(:,:)=0
648	mem_Nccn_co2(:,:)=0
649	c
650	c emissivity
651	c ----------
652	emis=emissiv
653	IF (co2ice(1).eq.1.E+0) THEN
654	emis=emisice(1) ! northern hemisphere
655	IF(latitude(1).LT.0) emis=emisice(2) ! southern hemisphere
656	ENDIF
657
658
659
660	c Compute pressures and altitudes of atmospheric levels
661	c ----------------------------------------------------------------
662
663	c Vertical Coordinates
664	c """"""""""""""""""""
665	hybrid=.true.
666	PRINT *,'Hybrid coordinates ?'
667	call getin("hybrid",hybrid)
668	write(,) " hybrid = ", hybrid
669
670	CALL disvert_noterre
671	! now that disvert has been called, initialize module vertical_layers_mod
672	call init_vertical_layers(nlayer,preff,scaleheight,
673	& ap,bp,aps,bps,presnivs,pseudoalt)
674
675	DO ilevel=1,nlevel
676	plev(ilevel)=ap(ilevel)+psurf*bp(ilevel)
677	ENDDO
678
679	DO ilayer=1,nlayer
680	play(ilayer)=aps(ilayer)+psurf*bps(ilayer)
681	ENDDO
682
683	DO ilayer=1,nlayer
684	zlay(ilayer)=-200.E+0 rlog(play(ilayer)/plev(1))
685	& /g
686	ENDDO
687
688
689	c Initialize temperature profile
690	c --------------------------------------
691	pks=psurf**rcp
692
693	c altitude in km in profile: divide zlay by 1000
694	tmp1(0)=0.E+0
695	DO ilayer=1,nlayer
696	tmp1(ilayer)=zlay(ilayer)/1000.E+0
697	ENDDO
698
699	call profile(nlayer+1,tmp1,tmp2)
700
701	tsurf=tmp2(0)
702	DO ilayer=1,nlayer
703	temp(ilayer)=tmp2(ilayer)
704	ENDDO
705
706
707
708	! Initialize soil properties and temperature
709	! ------------------------------------------
710	volcapa=1.e6 ! volumetric heat capacity
711	DO isoil=1,nsoil
712	inertiedat(1,isoil)=inertiedat(1,1) ! soil thermal inertia
713	tsoil(isoil)=tsurf(1) ! soil temperature
714	ENDDO
715
716	! Initialize depths
717	! -----------------
718	do isoil=0,nsoil-1
719	mlayer(isoil)=2.e-4(2.*(isoil-0.5)) ! mid-layer depth
720	enddo
721	do isoil=1,nsoil
722	layer(isoil)=2.e-4(2.*(isoil-1)) ! layer depth
723	enddo
724
725	c Initialize traceurs
726	c ---------------------------
727
728	if (photochem.or.callthermos) then
729	write(,) 'Initializing chemical species'
730	! thermo=0: initialize over all atmospheric layers
731	thermo=0
732	call inichim_newstart(q,psurf,sig,nq,latitude,longitude,
733	$ cell_area,thermo,qsurf)
734	endif
735
736	c Check if the surface is a water ice reservoir
737	c --------------------------------------------------
738	watercaptag(1)=.false. ! Default: no water ice reservoir
739	print *,'Water ice cap on ground ?'
740	call getin("watercaptag",watercaptag)
741	write(,) " watercaptag = ",watercaptag
742
743
744	c Initialization for GRADS outputs in "g1d.dat" and "g1d.ctl"
745	c ----------------------------------------------------------------
746	c (output done in "writeg1d", typically called by "physiq.F")
747
748	g1d_nlayer=nlayer
749	g1d_nomfich='g1d.dat'
750	g1d_unitfich=40
751	g1d_nomctl='g1d.ctl'
752	g1d_unitctl=41
753	g1d_premier=.true.
754	g2d_premier=.true.
755
756	c Write a "startfi" file
757	c --------------------
758	c This file will be read during the first call to "physiq".
759	c It is needed to transfert physics variables to "physiq"...
760
761	call physdem0("startfi.nc",longitude,latitude,nsoilmx,ngrid,llm,
762	& nq,dtphys,float(day0),0.,cell_area,
763	& albedodat,inertiedat,zmea,zstd,zsig,zgam,zthe,
764	& hmons,summit,base)
765	call physdem1("startfi.nc",nsoilmx,ngrid,llm,nq,
766	& dtphys,time,
767	& tsurf,tsoil,co2ice,albedo,emis,q2,qsurf,tauscaling,
768	& totcloudfrac,wstar,
769	& mem_Mccn_co2,mem_Nccn_co2,
770	& mem_Mh2o_co2)
771
772	c=======================================================================
773	c 1D MODEL TIME STEPPING LOOP
774	c=======================================================================
775	c
776	firstcall=.true.
777	lastcall=.false.
778
779	DO idt=1,ndt
780	c IF (idt.eq.ndt) lastcall=.true.
781	IF (idt.eq.ndt-day_step-1) then !test
782	lastcall=.true.
783	call solarlong(day*1.0,zls)
784	write(103,) 'Ls=',zls180./pi
785	write(103,) 'Lat=', latitude(1)180./pi
786	write(103,) 'Tau=', tauvis/odprefpsurf
787	write(103,*) 'RunEnd - Atmos. Temp. File'
788	write(103,*) 'RunEnd - Atmos. Temp. File'
789	write(104,) 'Ls=',zls180./pi
790	write(104,*) 'Lat=', latitude(1)
791	write(104,) 'Tau=', tauvis/odprefpsurf
792	write(104,*) 'RunEnd - Atmos. Temp. File'
793	ENDIF
794
795	c compute geopotential
796	c ~~~~~~~~~~~~~~~~~~~~~
797	DO ilayer=1,nlayer
798	s(ilayer)=(aps(ilayer)/psurf+bps(ilayer))**rcp
799	h(ilayer)=cpptemp(ilayer)/(pkss(ilayer))
800	ENDDO
801	phi(1)=pksh(1)(1.E+0-s(1))
802	DO ilayer=2,nlayer
803	phi(ilayer)=phi(ilayer-1)+
804	& pks(h(ilayer-1)+h(ilayer)).5E+0
805	& *(s(ilayer-1)-s(ilayer))
806
807	ENDDO
808
809	c call physics
810	c --------------------
811	! write(,) "testphys1d avant q", q(1,:)
812	CALL physiq (1,llm,nq,
813	, firstcall,lastcall,
814	, day,time,dtphys,
815	, plev,play,phi,
816	, u, v,temp, q,
817	, w,
818	C - outputs
819	s du, dv, dtemp, dq,dpsurf)
820	! write(,) "testphys1d apres q", q(1,:)
821
822
823	c wind increment : specific for 1D
824	c --------------------------------
825
826	c The physics compute the tendencies on u and v,
827	c here we just add Coriolos effect
828	c
829	c DO ilayer=1,nlayer
830	c du(ilayer)=du(ilayer)+ptif*(v(ilayer)-grv)
831	c dv(ilayer)=dv(ilayer)+ptif*(-u(ilayer)+gru)
832	c ENDDO
833
834	c For some tests : No coriolis force at equator
835	c if(latitude(1).eq.0.) then
836	DO ilayer=1,nlayer
837	du(ilayer)=du(ilayer)+ (gru-u(ilayer))/1.e4
838	dv(ilayer)=dv(ilayer)+ (grv-v(ilayer))/1.e4
839	ENDDO
840	c end if
841	c
842	c
843	c Compute time for next time step
844	c ---------------------------------------
845	firstcall=.false.
846	time=time+dtphys/daysec
847	IF (time.gt.1.E+0) then
848	time=time-1.E+0
849	day=day+1
850	ENDIF
851
852	c compute winds and temperature for next time step
853	c ----------------------------------------------------------
854
855	DO ilayer=1,nlayer
856	u(ilayer)=u(ilayer)+dtphys*du(ilayer)
857	v(ilayer)=v(ilayer)+dtphys*dv(ilayer)
858	temp(ilayer)=temp(ilayer)+dtphys*dtemp(ilayer)
859	ENDDO
860
861	c compute pressure for next time step
862	c ----------------------------------------------------------
863
864	psurf=psurf+dtphys*dpsurf(1) ! surface pressure change
865	DO ilevel=1,nlevel
866	plev(ilevel)=ap(ilevel)+psurf*bp(ilevel)
867	ENDDO
868	DO ilayer=1,nlayer
869	play(ilayer)=aps(ilayer)+psurf*bps(ilayer)
870	ENDDO
871
872	! increment tracers
873	DO iq = 1, nq
874	DO ilayer=1,nlayer
875	q(ilayer,iq)=q(ilayer,iq)+dtphys*dq(ilayer,iq)
876	ENDDO
877	ENDDO
878
879	ENDDO ! of idt=1,ndt ! end of time stepping loop
880
881	c ========================================================
882	c OUTPUTS
883	c ========================================================
884
885	c finalize and close grads files "g1d.dat" and "g1d.ctl"
886
887	c CALL endg1d(1,nlayer,zphi/(g*1000.),ndt)
888	CALL endg1d(1,nlayer,zlay/1000.,ndt)
889
890	write(,) "testphys1d: Everything is cool."
891
892	END
893
894	c***********************************************************************
895	c***********************************************************************
896	c Dummy subroutines used only in 3D, but required to
897	c compile testphys1d (to cleanly use writediagfi)
898
899	subroutine gr_fi_dyn(nfield,ngrid,im,jm,pfi,pdyn)
900
901	IMPLICIT NONE
902
903	INTEGER im,jm,ngrid,nfield
904	REAL pdyn(im,jm,nfield)
905	REAL pfi(ngrid,nfield)
906
907	if (ngrid.ne.1) then
908	write(,) "gr_fi_dyn error: in 1D ngrid should be 1!!!"
909	stop
910	endif
911
912	pdyn(1,1,1:nfield)=pfi(1,1:nfield)
913
914	end
915
916	c***********************************************************************
917	c***********************************************************************
918

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format