Context Navigation

conf_phys.F @ 3128

Last change on this file since 3128 was 3128, checked in by jbclement, 12 months ago
Mars PCM: Correction of a bug related to r3126: 'choice_ads' did not have a default value which made the model crash. 'choice_ads = 0' is the default value (no adsorption). JBC
File size: 47.1 KB

Line
1	MODULE conf_phys_mod
2
3	IMPLICIT NONE
4
5	CONTAINS
6
7	SUBROUTINE conf_phys(ngrid,nlayer,nq)
8
9	!=======================================================================
10	!
11	! purpose:
12	! -------
13	!
14	! Initialisation for the physical parametrisations
15	! flags (i.e. run-time options) of the Mars PCM
16	!-----------------------------------------------------------------------
17
18	USE ioipsl_getin_p_mod, ONLY : getin_p
19	use tracer_mod, only : nuice_sed, ccn_factor, nuiceco2_sed,
20	& nuice_ref,nuiceco2_ref
21	use surfdat_h, only: albedo_h2o_cap,albedo_h2o_frost,
22	& frost_albedo_threshold, inert_h2o_ice,
23	& frost_metam_threshold,old_wsublimation_scheme
24	use time_phylmdz_mod, only: ecritphy,day_step,iphysiq,ecritstart,
25	& daysec,dtphys
26	use dimradmars_mod, only: naerkind, name_iaer,
27	& ini_scatterers,tauvis
28	use datafile_mod, only: datadir
29	use wstats_mod, only: callstats
30	use writediagsoil_mod, only: diagsoil
31	use calchim_mod, only: ichemistry
32	use co2condens_mod, only: scavco2cond
33	use dust_param_mod, only: dustbin, doubleq, submicron, active,
34	& lifting, freedust, callddevil,
35	& dustscaling_mode,
36	& reff_driven_IRtoVIS_scenario
37	use aeropacity_mod, only: iddist, topdustref
38	USE mod_phys_lmdz_transfert_para, ONLY: bcast
39	USE paleoclimate_mod,ONLY: paleoclimate,albedo_perenialco2,
40	& lag_layer
41	use microphys_h, only: mteta
42	use comsoil_h, only: adsorption_soil, choice_ads
43
44	IMPLICIT NONE
45
46	include "callkeys.h"
47
48	INTEGER,INTENT(IN) :: ngrid ! number of atmospheric columns
49	INTEGER,INTENT(IN) :: nlayer ! number of atmospheric layers
50	INTEGER,INTENT(IN) :: nq ! number of tracers
51
52	INTEGER ierr,j
53	character(len=20),parameter :: modname="conf_phys"
54
55	CHARACTER ch1*12
56	#ifndef MESOSCALE
57	! read in some parameters from "run.def" for physics,
58	! or shared between dynamics and physics.
59	ecritphy=240 ! default value
60	call getin_p("ecritphy",ecritphy) ! frequency of outputs in physics,
61	! in dynamical steps
62	day_step=960 ! default value
63	call getin_p("day_step",day_step) ! number of dynamical steps per day
64	iphysiq=20 ! default value
65	call getin_p("iphysiq",iphysiq) ! call physics every iphysiq dyn step
66	ecritstart=0 ! default value
67	call getin_p("ecritstart",ecritstart) ! write a restart every ecristart steps
68	#endif
69
70	! --------------------------------------------------------------
71	! Reading the "callphys.def" file controlling some key options
72	! --------------------------------------------------------------
73
74	!$OMP MASTER
75	! check that 'callphys.def' file is around
76	OPEN(99,file='callphys.def',status='old',form='formatted'
77	& ,iostat=ierr)
78	CLOSE(99)
79	!$OMP END MASTER
80	call bcast(ierr)
81	! ierr=0
82
83	IF(ierr.EQ.0) THEN
84	PRINT*
85	PRINT*
86	PRINT*,'--------------------------------------------'
87	PRINT*,' conf_phys: Parameters for the physics (callphys.def)'
88	PRINT*,'--------------------------------------------'
89
90	write(,) "Directory where external input files are:"
91	! default path is set in datafile_mod
92	call getin_p("datadir",datadir)
93	write(,) " datadir = ",trim(datadir)
94
95	write(,) "Initialize physics with startfi.nc file ?"
96	startphy_file=.true.
97	call getin_p("startphy_file",startphy_file)
98	write(,) "startphy_file", startphy_file
99
100	write(,) "Diurnal cycle ?"
101	write(,) "(if diurnal=False, diurnal averaged solar heating)"
102	diurnal=.true. ! default value
103	call getin_p("diurnal",diurnal)
104	write(,) " diurnal = ",diurnal
105
106	write(,) "Seasonal cycle ?"
107	write(,) "(if season=False, Ls stays constant, to value ",
108	& "set in 'start'"
109	season=.true. ! default value
110	call getin_p("season",season)
111	write(,) " season = ",season
112
113	write(,) "Write some extra output to the screen ?"
114	lwrite=.false. ! default value
115	call getin_p("lwrite",lwrite)
116	write(,) " lwrite = ",lwrite
117
118	write(,) "Save statistics in file stats.nc ?"
119	#ifdef MESOSCALE
120	callstats=.false. ! default value
121	#else
122	callstats=.true. ! default value
123	#endif
124	call getin_p("callstats",callstats)
125	write(,) " callstats = ",callstats
126
127	write(,) "Write sub-surface fields in file diagsoil.nc ?"
128	diagsoil=.false. ! default value
129	call getin_p("diagsoil",diagsoil)
130	write(,) " diagsoil = ",diagsoil
131
132	write(,) "Save EOF profiles in file 'profiles' for ",
133	& "Climate Database?"
134	calleofdump=.false. ! default value
135	call getin_p("calleofdump",calleofdump)
136	write(,) " calleofdump = ",calleofdump
137
138	write(,) "Dust scenario: 1=constant dust (read from startfi",
139	& " or set as tauvis); 2=Viking scenario; =3 MGS scenario,",
140	& "=6 cold (low dust) scenario; =7 warm (high dust) scenario ",
141	& "=24,25 ... 30 :Mars Year 24, ... or 30 from TES assimilation"
142	iaervar=3 ! default value
143	call getin_p("iaervar",iaervar)
144	write(,) " iaervar = ",iaervar
145
146	write(,) "Reference (visible) dust opacity at 610 Pa ",
147	& "(matters only if iaervar=1)"
148	! NB: default value of tauvis is set/read in startfi.nc file
149	call getin_p("tauvis",tauvis)
150	write(,) " tauvis = ",tauvis
151
152	write(,) "Dust vertical distribution:"
153	write(,) "(=1 top set by topdustref parameter;",
154	& " =2 Viking scenario; =3 MGS scenario)"
155	iddist=3 ! default value
156	call getin_p("iddist",iddist)
157	write(,) " iddist = ",iddist
158
159	write(,) "Dust top altitude (km). (Matters only if iddist=1)"
160	topdustref= 90.0 ! default value
161	call getin_p("topdustref",topdustref)
162	write(,) " topdustref = ",topdustref
163
164	write(,) "Prescribed surface thermal flux (H/(rho*cp),K m/s)"
165	tke_heat_flux=0. ! default value
166	call getin_p("tke_heat_flux",tke_heat_flux)
167	write(,) " tke_heat_flux = ",tke_heat_flux
168	write(,) " 0 means the usual schemes are computing"
169
170	write(,) "call radiative transfer ?"
171	callrad=.true. ! default value
172	call getin_p("callrad",callrad)
173	write(,) " callrad = ",callrad
174
175	write(,) "call slope insolation scheme ?",
176	& "(matters only if callrad=T)"
177	#ifdef MESOSCALE
178	callslope=.true. ! default value
179	#else
180	callslope=.false. ! default value (not supported yet)
181	#endif
182	call getin_p("callslope",callslope)
183	write(,) " callslope = ",callslope
184
185	write(,) "call NLTE radiative schemes ?",
186	& "(matters only if callrad=T)"
187	callnlte=.false. ! default value
188	call getin_p("callnlte",callnlte)
189	write(,) " callnlte = ",callnlte
190
191	nltemodel=0 !default value
192	write(,) "NLTE model?"
193	write(,) "0 -> old model, static O"
194	write(,) "1 -> old model, dynamic O"
195	write(,) "2 -> new model"
196	write(,) "(matters only if callnlte=T)"
197	call getin_p("nltemodel",nltemodel)
198	write(,) " nltemodel = ",nltemodel
199
200	write(,) "call CO2 NIR absorption ?",
201	& "(matters only if callrad=T)"
202	callnirco2=.false. ! default value
203	call getin_p("callnirco2",callnirco2)
204	write(,) " callnirco2 = ",callnirco2
205
206	write(,) "New NIR NLTE correction ?",
207	$ "0-> old model (no correction)",
208	$ "1-> new correction",
209	$ "(matters only if callnirco2=T)"
210	#ifdef MESOSCALE
211	nircorr=0 !default value. this is OK below 60 km.
212	#else
213	nircorr=0 !default value
214	#endif
215	call getin_p("nircorr",nircorr)
216	write(,) " nircorr = ",nircorr
217
218	write(,) "call turbulent vertical diffusion ?"
219	calldifv=.true. ! default value
220	call getin_p("calldifv",calldifv)
221	write(,) " calldifv = ",calldifv
222
223	write(,) "call thermals ?"
224	calltherm=.false. ! default value
225	call getin_p("calltherm",calltherm)
226	write(,) " calltherm = ",calltherm
227
228	write(,) "call convective adjustment ?"
229	calladj=.true. ! default value
230	call getin_p("calladj",calladj)
231	write(,) " calladj = ",calladj
232
233	if (calltherm .and. calladj) then
234	print*,'!!! PLEASE NOTE !!!'
235	print*,'convective adjustment is on'
236	print*,'but since thermal plume model is on'
237	print*,'convadj is only activated above the PBL'
238	endif
239
240	write(,) "used latest version of yamada scheme?"
241	callyamada4=.true. ! default value
242	call getin_p("callyamada4",callyamada4)
243	write(,) " callyamada4 = ",callyamada4
244
245	if (calltherm .and. .not.callyamada4) then
246	print*,'!!!! WARNING WARNING WARNING !!!!'
247	print*,'if calltherm=T we strongly advise that '
248	print*,'you set the flag callyamada4 to T '
249	print*,'!!!! WARNING WARNING WARNING !!!!'
250	endif
251
252	write(,) "call Richardson-based surface layer ?"
253	callrichsl=.false. ! default value
254	call getin_p("callrichsl",callrichsl)
255	write(,) " callrichsl = ",callrichsl
256
257	if (calltherm .and. .not.callrichsl) then
258	print*,'WARNING WARNING WARNING'
259	print*,'if calltherm=T we strongly advise that '
260	print*,'you use the new surface layer scheme '
261	print*,'by setting callrichsl=T '
262	endif
263
264	if (calladj .and. callrichsl .and. (.not. calltherm)) then
265	print*,'You should not be calling the convective adjustment
266	& scheme with the Richardson surface-layer and without the thermals
267	&. This approach is not
268	& physically consistent and can lead to unrealistic friction
269	& values.'
270	print*,'If you want to use the Ri. surface-layer, either
271	& activate thermals OR de-activate the convective adjustment.'
272	call abort_physic(modname,
273	& "Richardson layer must be used with thermals",1)
274	endif
275
276	write(,) "call CO2 condensation ?"
277	callcond=.true. ! default value
278	call getin_p("callcond",callcond)
279	write(,) " callcond = ",callcond
280
281	write(,)"call thermal conduction in the soil ?"
282	callsoil=.true. ! default value
283	call getin_p("callsoil",callsoil)
284	write(,) " callsoil = ",callsoil
285
286
287	write(,)"call Lott's gravity wave/subgrid topography ",
288	& "scheme ?"
289	calllott=.true. ! default value
290	call getin_p("calllott",calllott)
291	write(,)" calllott = ",calllott
292
293	write(,)"call Lott's non-oro GWs parameterisation ",
294	& "scheme ?"
295	calllott_nonoro=.false. ! default value
296	call getin_p("calllott_nonoro",calllott_nonoro)
297	write(,)" calllott_nonoro = ",calllott_nonoro
298
299	! rocket dust storm injection scheme
300	write(,)"call rocket dust storm parametrization"
301	rdstorm=.false. ! default value
302	call getin_p("rdstorm",rdstorm)
303	write(,)" rdstorm = ",rdstorm
304	! rocket dust storm detrainment coefficient
305	coeff_detrainment=0.02 ! default value
306	call getin_p("coeff_detrainment",coeff_detrainment)
307	write(,)" coeff_detrainment = ",coeff_detrainment
308
309	! entrainment by mountain top dust flows scheme
310	write(,)"call mountain top dust flows parametrization"
311	topflows=.false. ! default value
312	call getin_p("topflows",topflows)
313	write(,)" topflows = ",topflows
314
315	! latent heat release from ground water ice sublimation/condensation
316	write(,)"latent heat release during sublimation",
317	& " /condensation of ground water ice"
318	latentheat_surfwater=.true. ! default value
319	call getin_p("latentheat_surfwater",latentheat_surfwater)
320	write(,)" latentheat_surfwater = ",latentheat_surfwater
321
322	write(,)"rad.transfer is computed every iradia",
323	& " physical timestep"
324	iradia=1 ! default value
325	call getin_p("iradia",iradia)
326	write(,)" iradia = ",iradia
327
328
329	write(,)"Output of the exchange coefficient mattrix ?",
330	& "(for diagnostics only)"
331	callg2d=.false. ! default value
332	call getin_p("callg2d",callg2d)
333	write(,)" callg2d = ",callg2d
334
335	write(,)"Rayleigh scattering : (should be .false. for now)"
336	rayleigh=.false.
337	call getin_p("rayleigh",rayleigh)
338	write(,)" rayleigh = ",rayleigh
339
340	! PALEOCLIMATE
341
342	write(,)"Using lag layer??"
343	lag_layer=.false.
344	call getin_p("lag_layer",lag_layer)
345	write(,) " lag_layer = ", lag_layer
346
347	write(,)"Is it paleoclimate run?"
348	paleoclimate=.false. ! default value
349	call getin_p("paleoclimate",paleoclimate)
350	write(,)" paleoclimate = ",paleoclimate
351
352
353	write(,)"Albedo for perenial CO2 ice?"
354	albedo_perenialco2 = 0.85 ! default value
355	call getin_p("albedo_perenialco2",albedo_perenialco2)
356	write(,)"albedo_perenialco2 = ",albedo_perenialco2
357
358	! TRACERS:
359
360	! dustbin
361	write(,)"Transported dust ? (if >0, use 'dustbin' dust bins)"
362	dustbin=0 ! default value
363	call getin_p("dustbin",dustbin)
364	write(,)" dustbin = ",dustbin
365	! active
366	write(,)"Radiatively active dust ? (matters if dustbin>0)"
367	active=.false. ! default value
368	call getin_p("active",active)
369	write(,)" active = ",active
370
371	! Test of incompatibility:
372	! if active is used, then dustbin should be > 0
373
374	if (active.and.(dustbin.lt.1)) then
375	print*,'if active is used, then dustbin should > 0'
376	call abort_physic(modname,
377	& "active option requires dustbin < 0",1)
378	endif
379	! doubleq
380	write(,)"use mass and number mixing ratios to predict",
381	& " dust size ?"
382	doubleq=.false. ! default value
383	call getin_p("doubleq",doubleq)
384	write(,)" doubleq = ",doubleq
385	! submicron
386	submicron=.false. ! default value
387	call getin_p("submicron",submicron)
388	write(,)" submicron = ",submicron
389
390	! Test of incompatibility:
391	! if doubleq is used, then dustbin should be 2
392
393	if (doubleq.and.(dustbin.ne.2)) then
394	print*,'if doubleq is used, then dustbin should be 2'
395	call abort_physic(modname,
396	& "doubleq option requires dustbin = 2",1)
397	endif
398	if (doubleq.and.submicron.and.(nq.LT.3)) then
399	print*,'If doubleq is used with a submicron tracer,'
400	print*,' then the number of tracers has to be'
401	print*,' larger than 3.'
402	call abort_physic(modname,
403	& "submicron option requires dustbin > 2",1)
404	endif
405
406	! lifting
407	write(,)"dust lifted by GCM surface winds ?"
408	lifting=.false. ! default value
409	call getin_p("lifting",lifting)
410	write(,)" lifting = ",lifting
411
412	! Test of incompatibility:
413	! if lifting is used, then dustbin should be > 0
414
415	if (lifting.and.(dustbin.lt.1)) then
416	print*,'if lifting is used, then dustbin should > 0'
417	call abort_physic(modname,
418	& "lifting option requires dustbin > 0",1)
419	endif
420
421	! dust injection scheme
422	dustinjection=0 ! default: no injection scheme
423	call getin_p("dustinjection",dustinjection)
424	write(,)" dustinjection = ",dustinjection
425	! dust injection scheme coefficient
426	coeff_injection=0.25 ! default value
427	call getin_p("coeff_injection",coeff_injection)
428	write(,)" coeff_in,jection = ",coeff_injection
429	! timing for dust injection
430	ti_injection=0. ! default value
431	tf_injection=24. ! default value
432	call getin_p("ti_injection",ti_injection)
433	write(,)" ti_injection = ",ti_injection
434	call getin_p("tf_injection",tf_injection)
435	write(,)" tf_injection = ",tf_injection
436
437	! free evolving dust
438	! freedust=true just says that there is no lifting and no dust opacity scaling.
439	write(,)"dust lifted by GCM surface winds ?"
440	freedust=.false. ! default value
441	call getin_p("freedust",freedust)
442	write(,)" freedust = ",freedust
443	if (freedust.and..not.doubleq) then
444	print*,'freedust should be used with doubleq !'
445	call abort_physic(modname,
446	& "freedust option requires doubleq",1)
447	endif
448
449	! dust rescaling mode (if any)
450	! =0 --> freedust, tauscaling=1
451	! =1 --> GCM5.3-like, tauscaling computed wrt tau_pref_scenario
452	! =2 --> tauscaling=1 but dust_rad_adjust (rescaling for the radiative transfer only)
453	if (freedust) then
454	dustscaling_mode=0
455	else
456	dustscaling_mode=1 ! GCMv5.3 style
457	endif
458	call getin_p("dustscaling_mode",dustscaling_mode)
459	write(,) "dustscaling_mode=",dustscaling_mode
460	if ((dustscaling_mode.eq.1).and.freedust) then
461	print*,'freedust and dustscaling_mode=1 are incompatible !'
462	call abort_physic(modname,
463	& "freedust and dustscaling_mode=1 are incompatible",1)
464	endif
465
466	#ifndef MESOSCALE
467	! this test is valid in GCM case
468	! ... not in mesoscale case, for we want to activate mesoscale lifting
469	if (freedust.and.dustinjection.eq.0)then
470	if(lifting) then
471	print*,'if freedust is used and dustinjection = 0,
472	& then lifting should not be used'
473	call abort_physic(modname,
474	& "freedust option with dustinjection = 0"//
475	& " requires lifting to be false",1)
476	endif
477	endif
478	#endif
479	if (dustinjection.eq.1)then
480	if(.not.lifting) then
481	print*,"if dustinjection=1, then lifting should be true"
482	call abort_physic(modname,
483	& "dustinjection=1 requires lifting",1)
484	endif
485	if(.not.freedust) then
486	print*,"if dustinjection=1, then freedust should be true"
487	call abort_physic(modname,
488	& "dustinjection=1 requires freedust",1)
489	endif
490	endif
491	! rocket dust storm and entrainment by top flows
492	! Test of incompatibility:
493	! if rdstorm or topflows is used, then doubleq should be true
494	if ((rdstorm.or.topflows).and..not.doubleq) then
495	print*,'if rdstorm or topflows is used, then doubleq
496	& should be used !'
497	call abort_physic(modname,
498	& "rdstorm or topflows requires doubleq",1)
499	endif
500	if ((rdstorm.or.topflows).and..not.active) then
501	print*,'if rdstorm or topflows is used, then active
502	& should be used !'
503	call abort_physic(modname,
504	& "rdstorm or topflows requires active",1)
505	endif
506	if (rdstorm.and..not.lifting) then
507	print*,'if rdstorm is used, then lifting
508	& should be used !'
509	call abort_physic(modname,
510	& "rdstorm requires lifting",1)
511	endif
512	if ((rdstorm.or.topflows).and..not.freedust) then
513	print*,'if rdstorm or topflows is used, then freedust
514	& should be used !'
515	call abort_physic(modname,
516	& "rdstorm or topflows requires freedust",1)
517	endif
518	if (rdstorm.and.(dustinjection.eq.0)) then
519	print*,'if rdstorm is used, then dustinjection
520	& should be used !'
521	call abort_physic(modname,
522	& "rdstorm requires dustinjection",1)
523	endif
524	! Dust IR opacity
525	write(,)" Wavelength for infrared opacity of dust ?"
526	write(,)" Choices are:"
527	write(,)" tes --- > 9.3 microns [default]"
528	write(,)" mcs --- > 21.6 microns"
529	!
530	! WARNING WARNING WARNING WARNING WARNING WARNING
531	!
532	! BEFORE ADDING A NEW VALUE, BE SURE THAT THE
533	! CORRESPONDING WAVELENGTH IS IN THE LOOKUP TABLE,
534	! OR AT LEAST NO TO FAR, TO AVOID FALLACIOUS INTERPOLATIONS.
535	!
536	dustiropacity="tes" !default value
537	call getin_p("dustiropacity",dustiropacity)
538	write(,)" dustiropacity = ",trim(dustiropacity)
539	select case (trim(dustiropacity))
540	case ("tes")
541	dustrefir = 9.3E-6
542	case ("mcs")
543	dustrefir = 21.6E-6
544	case default
545	write(,) trim(dustiropacity),
546	& " is not a valid option for dustiropacity"
547	call abort_physic(modname,
548	& "invalid dustiropacity option value",1)
549	end select
550	! Dust scenario IR to VIS conversion
551	write(,)"Use an IR to VIS conversion coefficient"
552	write(,)"for the dust scenario, that is dependent"
553	write(,)"on the GCM dust effective radius,"
554	write(,)"instead of a fixed 2.6 coefficient ?"
555	reff_driven_IRtoVIS_scenario=.false. !default value
556	call getin_p("reff_driven_IRtoVIS_scenario",
557	& reff_driven_IRtoVIS_scenario)
558	write(,)" reff_driven_IRtoVIS_scenario = ",
559	& reff_driven_IRtoVIS_scenario
560	! Test of incompatibility:
561	! if reff_driven_IRtoVIS_scenario=.true.,
562	! dustrefir must be 9.3E-6 = scenarios' wavelength
563	if (reff_driven_IRtoVIS_scenario .and.
564	& (dustrefir.ne.9.3E-6)) then
565	print*,'if reff_driven_IRtoVIS_scenario is used, then '//
566	& 'the GCM IR reference wavelength should be the one '//
567	& 'of the scenarios (dustiropacity=tes)'
568	call abort_physic(modname,
569	& "reff_driven_IRtoVIS_scenario requires tes wavelength",1)
570	endif
571
572	! callddevil
573	write(,)" dust lifted by dust devils ?"
574	callddevil=.false. !default value
575	call getin_p("callddevil",callddevil)
576	write(,)" callddevil = ",callddevil
577
578	! Test of incompatibility:
579	! if dustdevil is used, then dustbin should be > 0
580	if (callddevil.and.(dustbin.lt.1)) then
581	print*,'if dustdevil is used, then dustbin should > 0'
582	call abort_physic(modname,
583	& "callddevil requires dustbin > 0",1)
584	endif
585
586	! sedimentation
587	write(,) "Gravitationnal sedimentation ?"
588	sedimentation=.true. ! default value
589	call getin_p("sedimentation",sedimentation)
590	write(,) " sedimentation = ",sedimentation
591	! activice
592	write(,) "Radiatively active transported atmospheric ",
593	& "water ice ?"
594	activice=.false. ! default value
595	call getin_p("activice",activice)
596	write(,) " activice = ",activice
597	! water
598	write(,) "Compute water cycle ?"
599	water=.false. ! default value
600	call getin_p("water",water)
601	write(,) " water = ",water
602	! hdo
603	write(,) "Compute hdo cycle ?"
604	hdo=.false. ! default value
605	call getin_p("hdo",hdo)
606	write(,) " hdo = ",hdo
607
608	write(,) "Use fractionation for hdo?"
609	hdofrac=.true. ! default value
610	call getin_p("hdofrac",hdofrac)
611	write(,) " hdofrac = ",hdofrac
612
613	! Activeco2ice
614	write(,) "Radiatively active transported atmospheric ",
615	& "Co2 ice ?"
616	activeco2ice=.false. ! default value
617	call getin_p("activeco2ice",activeco2ice)
618	write(,) " activeco2ice = ",activeco2ice
619
620	! sub-grid cloud fraction: fixed
621	write(,) "Fixed cloud fraction?"
622	CLFfixval=1.0 ! default value
623	call getin_p("CLFfixval",CLFfixval)
624	write(,) "CLFfixval=",CLFfixval
625	! sub-grid cloud fraction: varying
626	write(,) "Use partial nebulosity?"
627	CLFvarying=.false. ! default value
628	call getin_p("CLFvarying",CLFvarying)
629	write(,)"CLFvarying=",CLFvarying
630
631	!CO2 clouds scheme?
632	write(,) "Compute CO2 clouds (implies microphysical scheme)?"
633	co2clouds=.false. ! default value
634	call getin_p("co2clouds",co2clouds)
635	write(,) " co2clouds = ",co2clouds
636	!Can water ice particles serve as CCN for CO2clouds
637	write(,) "Use water ice as CO2 clouds CCN ?"
638	co2useh2o=.false. ! default value
639	call getin_p("co2useh2o",co2useh2o)
640	write(,) " co2useh2o = ",co2useh2o
641	!Do we allow a supply of meteoritic paricles to serve as CO2 ice CCN?
642	write(,) "Supply meteoritic particle for CO2 clouds ?"
643	meteo_flux=.false. !Default value
644	call getin_p("meteo_flux",meteo_flux)
645	write(,) " meteo_flux = ",meteo_flux
646	!Do we allow a sub-grid temperature distribution for the CO2 microphysics
647	write(,) "sub-grid temperature distribution for CO2 clouds?"
648	CLFvaryingCO2=.false. !Default value
649	call getin_p("CLFvaryingCO2",CLFvaryingCO2)
650	write(,) " CLFvaryingCO2 = ",CLFvaryingCO2
651	!Amplitude of the sub-grid temperature distribution for the CO2 microphysics
652	write(,) "sub-grid temperature amplitude for CO2 clouds?"
653	spantCO2=0 !Default value
654	call getin_p("spantCO2",spantCO2)
655	write(,) " spantCO2 = ",spantCO2
656	!Do you want to filter the sub-grid T distribution by a Saturation index?
657	write(,) "filter sub-grid temperature by Saturation index?"
658	satindexco2=.true.
659	call getin_p("satindexco2",satindexco2)
660	write(,) " satindexco2 = ",satindexco2
661
662
663	! thermal inertia feedback
664	write(,) "Activate the thermal inertia feedback ?"
665	tifeedback=.false. ! default value
666	call getin_p("tifeedback",tifeedback)
667	write(,) " tifeedback = ",tifeedback
668
669	! Test of incompatibility:
670
671	if (tifeedback.and..not.water) then
672	print*,'if tifeedback is used,'
673	print*,'water should be used too'
674	call abort_physic(modname,
675	& "tifeedback requires water",1)
676	endif
677
678	if (tifeedback.and..not.callsoil) then
679	print*,'if tifeedback is used,'
680	print*,'callsoil should be used too'
681	call abort_physic(modname,
682	& "tifeedback requires callsoil",1)
683	endif
684
685	if (activice.and..not.water) then
686	print*,'if activice is used, water should be used too'
687	call abort_physic(modname,
688	& "activeice requires water",1)
689	endif
690
691	if (hdo.and..not.water) then
692	print*,'if hdo is used, water should be used too'
693	call abort_physic(modname,
694	& "hd2 requires tracer",1)
695	endif
696
697
698	if (activeco2ice.and..not.co2clouds) then
699	print*,'if activeco2ice is used, co2clouds should be used too'
700	call abort_physic(modname,
701	& "activeco2ice requires co2clouds",1)
702	endif
703
704	! water ice clouds effective variance distribution for sedimentaion
705	write(,) "Sed effective variance for water ice clouds ?"
706	nuice_sed=0.45
707	call getin_p("nuice_sed",nuice_sed)
708	write(,) "water_param nueff Sedimentation:", nuice_sed
709
710	write(,) "Sed effective variance for CO2 clouds ?"
711	nuiceco2_sed=0.45
712	call getin_p("nuiceco2_sed",nuiceco2_sed)
713	write(,) "CO2 nueff Sedimentation:", nuiceco2_sed
714
715	write(,) "REF effective variance for CO2 clouds ?"
716	nuiceco2_ref=0.45
717	call getin_p("nuiceco2_ref",nuiceco2_ref)
718	write(,) "CO2 nueff Sedimentation:", nuiceco2_ref
719
720	write(,) "REF effective variance for water clouds ?"
721	nuice_ref=0.1
722	call getin_p("nuice_ref",nuice_ref)
723	write(,) "H2O nueff Sedimentation:", nuice_ref
724
725
726	! ccn factor if no scavenging
727	write(,) "water param CCN reduc. factor ?"
728	ccn_factor = 4.5
729	call getin_p("ccn_factor",ccn_factor)
730	write(,)" ccn_factor = ",ccn_factor
731	write(,)"Careful: only used when microphys=F, otherwise"
732	write(,)"the contact parameter is used instead;"
733
734	! microphys
735	write(,)"Microphysical scheme for water-ice clouds?"
736	microphys=.false. ! default value
737	call getin_p("microphys",microphys)
738	write(,)" microphys = ",microphys
739
740	! supersat
741	write(,)"Allow super-saturation of water vapor?"
742	supersat=.true. ! default value
743	call getin_p("supersat",supersat)
744	write(,)"supersat = ",supersat
745
746	! microphysical parameter contact
747	write(,) "water contact parameter ?"
748	mteta = 0.95 ! default value
749	temp_dependent_m = .false. ! default value
750	call getin_p("temp_dependent_m",temp_dependent_m)
751	if (temp_dependent_m) then !(JN 2023)
752	print*,'You have chosen a temperature-dependent water'
753	print*,'contact parameter ! From Maattanen et al. 2014'
754	else if (.not.temp_dependent_m) then
755	print*,'Water contact parameter is constant'
756	call getin_p("mteta",mteta)
757	write(,) "mteta = ", mteta
758	endif
759
760	! Adaptative timestep for cloud microphysics (JN 2023)
761	write(,)"Adaptative timestep for cloud",
762	& " microphysics ? (default is false)"
763	cloud_adapt_ts=.false. ! default value
764	call getin_p("cloud_adapt_ts",cloud_adapt_ts)
765	write(,)"cloud_adapt_ts= ",cloud_adapt_ts
766
767	! Test of incompatibility:
768	! If you want the adaptative timestep, you should use the
769	! temperature dependent contact parameter (otherwise the
770	! global water cycle is nuts !)
771	! However one can use the temperature dependent contact parameter
772	! without the adaptative timestep (MCD6.1 configuration)
773
774	if (cloud_adapt_ts.and..not.temp_dependent_m) then
775	print*,'Water cycle v6 : if cloud_adapt_ts is used'
776	print*,'then temp_dependent_m must be used!'
777	print*,'Otherwise the water cycle is unrealistic.'
778	call abort_physic(modname,
779	& "cloud_adapt_ts requires temp_dependent_m",1)
780	endif
781	! scavenging
782	write(,)"Dust scavenging by H2O/CO2 snowfall ?"
783	scavenging=.false. ! default value
784	call getin_p("scavenging",scavenging)
785	write(,)" scavenging = ",scavenging
786
787
788	! Test of incompatibility:
789	! if scavenging is used, then dustbin should be > 0
790
791	if ((microphys.and..not.doubleq).or.
792	& (microphys.and..not.water)) then
793	print*,'if microphys is used, then doubleq,'
794	print*,'and water must be used!'
795	call abort_physic(modname,
796	& "microphys requires water and doubleq",1)
797	endif
798	if (microphys.and..not.scavenging) then
799	print*,''
800	print*,'----------------WARNING-----------------'
801	print*,'microphys is used without scavenging !!!'
802	print*,'----------------WARNING-----------------'
803	print*,''
804	endif
805
806	if ((scavenging.and..not.microphys).or.
807	& (scavenging.and.(dustbin.lt.1)))then
808	print*,'if scavenging is used, then microphys'
809	print*,'must be used!'
810	call abort_physic(modname,
811	& "scavenging requires microphys",1)
812	endif
813
814	! Instantaneous scavenging by CO2
815	! -> expected to be replaced by scavenging with microphysics (flag scavenging) one day
816	write(,)"Dust scavenging by instantaneous CO2 snowfall ?"
817	scavco2cond=.false. ! default value
818	call getin_p("scavco2cond",scavco2cond)
819	write(,)" scavco2cond = ",scavco2cond
820	! Test of incompatibility:
821	! if scavco2cond is used, then dustbin should be > 0
822	if (scavco2cond.and.(dustbin.lt.1))then
823	print*,'if scavco2cond is used, then dustbin should be > 0'
824	call abort_physic(modname,
825	& "scavco2cond requires dustbin > 0",1)
826	endif
827	! if co2clouds is used, then there is no need for scavco2cond
828	if (co2clouds.and.scavco2cond) then
829	print*,''
830	print*,'----------------WARNING-----------------'
831	print*,' microphys scavenging is used so '
832	print*,' no need for scavco2cond !!! '
833	print*,'----------------WARNING-----------------'
834	print*,''
835	call abort_physic(modname,
836	& "incompatible co2cloud and scavco2cond options",1)
837	endif
838
839	! Test of incompatibility:
840
841	write(,) "Permanent water caps at poles ?",
842	& " .true. is RECOMMENDED"
843	write(,) "(with .true., North cap is a source of water ",
844	& "and South pole is a cold trap)"
845	caps=.true. ! default value
846	call getin_p("caps",caps)
847	write(,) " caps = ",caps
848
849	! JN : now separated between albedo_h2o_cap and
850	! albedo_h2o_frost. Retrocompatible with old
851	! callphys.def with albedo_h2o_ice
852	write(,) "water ice albedo ? Old settings use ",
853	& "albedo_h2o_ice, new settings use ",
854	& "albedo_h2o_cap and albedo_h2o_frost "
855	albedo_h2o_cap=0.35
856	albedo_h2o_frost=0.35
857	call getin_p("albedo_h2o_ice",albedo_h2o_cap)
858	albedo_h2o_frost=albedo_h2o_cap
859	call getin_p("albedo_h2o_cap",albedo_h2o_cap)
860	write(,) " albedo_h2o_cap = ",albedo_h2o_cap
861	call getin_p("albedo_h2o_frost",albedo_h2o_frost)
862	write(,) " albedo_h2o_frost = ",albedo_h2o_frost
863
864	! Northern polar cap albedo (JN 2021)
865	write(,)"Watercaptag albedo is unchanged by water frost",
866	& " deposition (default is false)"
867	cst_cap_albedo=.false. ! default value
868	call getin_p("cst_cap_albedo",cst_cap_albedo)
869	write(,)"cst_cap_albedo = ",cst_cap_albedo
870
871	! Watercap evolution & refill (with discriminated albedos) (JN 2021)
872	write(,)"Watercap is replenished by water frost",
873	& " accumulation (default is false)"
874	refill_watercap=.false. ! default value
875	call getin_p("refill_watercap",refill_watercap)
876	write(,)"refill_watercap= ",refill_watercap
877	! frost thickness threshold for refill_watercap (ice metamorphism)
878	write(,) "frost thickness threshold for metamorphism ?",
879	& "ie converted into watercap",
880	& "only if refill_watercap is .true."
881	frost_metam_threshold=0.05 ! (i.e 0.05 kg.m-2)
882	call getin_p("frost_metam_threshold",
883	& frost_metam_threshold)
884	write(,) " frost_metam_threshold = ",
885	& frost_metam_threshold
886
887
888	! inert_h2o_ice
889	write(,) "water ice thermal inertia ?"
890	inert_h2o_ice=2400 ! (J.m^-2.K^-1.s^-1/2)
891	call getin_p("inert_h2o_ice",inert_h2o_ice)
892	write(,) " inert_h2o_ice = ",inert_h2o_ice
893	! frost_albedo_threshold
894	write(,) "frost thickness threshold for albedo ?"
895	frost_albedo_threshold=0.005 ! 5.4 mic (i.e 0.005 kg.m-2)
896	call getin_p("frost_albedo_threshold",
897	& frost_albedo_threshold)
898	write(,) " frost_albedo_threshold = ",
899	& frost_albedo_threshold
900
901	! TMP: old_wsublimation_scheme
902	write(,) "Old water sublimation scheme?"
903	old_wsublimation_scheme = .true.
904	call getin_p("old_wsublimation_scheme",old_wsublimation_scheme)
905	write(,) "old_wsublimation_scheme",old_wsublimation_scheme
906
907	! call Titus crocus line -- DEFAULT IS NONE
908	write(,) "Titus crocus line ?"
909	tituscap=.false. ! default value
910	call getin_p("tituscap",tituscap)
911	write(,) "tituscap",tituscap
912
913	! Chemistry:
914	write(,) "photochemistry: include chemical species"
915	photochem=.false. ! default value
916	call getin_p("photochem",photochem)
917	write(,) " photochem = ",photochem
918
919	write(,) "Compute chemistry (if photochem is .true.)",
920	& "every ichemistry physics step (default: ichemistry=1)"
921	ichemistry=1
922	call getin_p("ichemistry",ichemistry)
923	write(,) " ichemistry = ",ichemistry
924
925
926	! SCATTERERS
927	write(,) "how many scatterers?"
928	naerkind=1 ! default value
929	call getin_p("naerkind",naerkind)
930	write(,)" naerkind = ",naerkind
931
932	! Test of incompatibility
933	c Logical tests for radiatively active water-ice clouds:
934	IF ( (activice.AND.(.NOT.water)).OR.
935	& (activice.AND.(naerkind.LT.2)) ) THEN
936	WRITE(,) 'If activice is TRUE, water has to be set'
937	WRITE(,) 'to TRUE, and "naerkind" must be at least'
938	WRITE(,) 'equal to 2.'
939	call abort_physic(modname,
940	& "radiatively active dust and water"//
941	& " require naerkind > 1",1)
942	ENDIF
943
944	!------------------------------------------
945	!------------------------------------------
946	! once naerkind is known allocate arrays
947	! -- we do it here and not in phys_var_init
948	! -- because we need to know naerkind first
949	CALL ini_scatterers(ngrid,nlayer)
950	!------------------------------------------
951	!------------------------------------------
952
953
954	c Please name the different scatterers here ----------------
955	name_iaer(1) = "dust_conrath" !! default choice is good old Conrath profile
956	IF (doubleq.AND.active) name_iaer(1) = "dust_doubleq" !! two-moment scheme
957
958	if (nq.gt.1) then
959	! trick to avoid problems compiling with 1 tracer
960	! and picky compilers who know name_iaer(2) is out of bounds
961	j=2
962	IF (rdstorm.AND..NOT.activice.AND..NOT.topflows) then
963	name_iaer(j) = "stormdust_doubleq" !! storm dust two-moment scheme
964	j = j+1
965	END IF
966
967	IF (rdstorm.AND.water.AND.activice.AND..NOT.topflows) then
968	name_iaer(j) = "stormdust_doubleq"
969	j = j+1
970	END IF
971
972	IF (topflows.AND..NOT.activice.AND..NOT.rdstorm) then
973	name_iaer(j) = "topdust_doubleq" !! storm dust two-moment scheme
974	j = j+1
975	END IF
976
977	IF (topflows.AND.water.AND.activice.AND..NOT.rdstorm) then
978	name_iaer(j) = "topdust_doubleq"
979	j = j+1
980	END IF
981
982	IF (rdstorm.AND.topflows.AND..NOT.activice) THEN
983	name_iaer(j) = "stormdust_doubleq"
984	name_iaer(j+1) = "topdust_doubleq"
985	j = j+2
986	ENDIF
987
988	IF (rdstorm.AND.topflows.AND.water.AND.activice) THEN
989	name_iaer(j) = "stormdust_doubleq"
990	name_iaer(j+1) = "topdust_doubleq"
991	j = j+2
992	ENDIF
993
994	IF (water.AND.activice) then
995	name_iaer(j) = "h2o_ice" !! radiatively-active clouds
996	j = j+1
997	END IF
998
999	IF (co2clouds.AND.activeco2ice) then
1000	name_iaer(j) = "co2_ice" !! radiatively-active co2 clouds
1001	j = j+1
1002	ENDIF
1003
1004	IF (submicron.AND.active) then
1005	name_iaer(j) = "dust_submicron" !! JBM experimental stuff
1006	j = j+1
1007	ENDIF
1008	endif ! of if (nq.gt.1)
1009	c ----------------------------------------------------------
1010
1011	! Adsorption
1012	adsorption_soil = .false. ! default value
1013	call getin_p("adsorption_soil",adsorption_soil)
1014	if (adsorption_soil .and. (.not. water)) then
1015	write(,)"Adsorption can be run only if water = True"
1016	call abort_physic(modname,
1017	& "Adsorption must be used with water = true",1)
1018	endif
1019
1020	choice_ads = 0 ! default value (no adsorption)
1021	if (adsorption_soil) choice_ads = 1
1022	call getin_p("choice_ads",choice_ads)
1023
1024	c ----------------------------------------------------------
1025
1026	! THERMOSPHERE
1027
1028	write(,) "call thermosphere ?"
1029	callthermos=.false. ! default value
1030	call getin_p("callthermos",callthermos)
1031	write(,) " callthermos = ",callthermos
1032
1033
1034	write(,) " water included without cycle ",
1035	& "(only if water=.false.)"
1036	thermoswater=.false. ! default value
1037	call getin_p("thermoswater",thermoswater)
1038	write(,) " thermoswater = ",thermoswater
1039
1040	write(,) "call thermal conduction ?",
1041	& " (only if callthermos=.true.)"
1042	callconduct=.false. ! default value
1043	call getin_p("callconduct",callconduct)
1044	write(,) " callconduct = ",callconduct
1045
1046	write(,) "call EUV heating ?",
1047	& " (only if callthermos=.true.)"
1048	calleuv=.false. ! default value
1049	call getin_p("calleuv",calleuv)
1050	write(,) " calleuv = ",calleuv
1051
1052	write(,) "call molecular viscosity ?",
1053	& " (only if callthermos=.true.)"
1054	callmolvis=.false. ! default value
1055	call getin_p("callmolvis",callmolvis)
1056	write(,) " callmolvis = ",callmolvis
1057
1058	write(,) "call molecular diffusion ?",
1059	& " (only if callthermos=.true.)"
1060	callmoldiff=.false. ! default value
1061	call getin_p("callmoldiff",callmoldiff)
1062	write(,) " callmoldiff = ",callmoldiff
1063
1064
1065	write(,) "call thermospheric photochemistry ?",
1066	& " (only if callthermos=.true.)"
1067	thermochem=.false. ! default value
1068	call getin_p("thermochem",thermochem)
1069	write(,) " thermochem = ",thermochem
1070
1071	write(,) "Method to include solar variability"
1072	write(,) "0-> fixed value of E10.7 (fixed_euv_value); ",
1073	& "1-> daily evolution of E10.7 (for given solvaryear)"
1074	solvarmod=1
1075	call getin_p("solvarmod",solvarmod)
1076	write(,) " solvarmod = ",solvarmod
1077
1078	write(,) "Fixed euv (for solvarmod==0) 10.7 value?"
1079	write(,) " (min=80 , ave=140, max=320)"
1080	fixed_euv_value=140 ! default value
1081	call getin_p("fixed_euv_value",fixed_euv_value)
1082	write(,) " fixed_euv_value = ",fixed_euv_value
1083
1084	write(,) "Solar variability as observed for MY: "
1085	write(,) "Only if solvarmod=1"
1086	solvaryear=24
1087	call getin_p("solvaryear",solvaryear)
1088	write(,) " solvaryear = ",solvaryear
1089
1090	write(,) "UV heating efficiency:",
1091	& "measured values between 0.19 and 0.23 (Fox et al. 1996)",
1092	& "lower values may be used to compensate low 15 um cooling"
1093	euveff=0.21 !default value
1094	call getin_p("euveff",euveff)
1095	write(,) " euveff = ", euveff
1096
1097
1098	if (.not.callthermos) then
1099	if (thermoswater) then
1100	print*,'if thermoswater is set, callthermos must be true'
1101	call abort_physic(modname,
1102	& "thermoswater requires callthermos",1)
1103	endif
1104	if (callconduct) then
1105	print*,'if callconduct is set, callthermos must be true'
1106	call abort_physic(modname,
1107	& "callconduct requires callthermos",1)
1108	endif
1109	if (calleuv) then
1110	print*,'if calleuv is set, callthermos must be true'
1111	call abort_physic(modname,
1112	& "calleuv requires callthermos",1)
1113	endif
1114	if (callmolvis) then
1115	print*,'if callmolvis is set, callthermos must be true'
1116	call abort_physic(modname,
1117	& "callmolvis requires callthermos",1)
1118	endif
1119	if (callmoldiff) then
1120	print*,'if callmoldiff is set, callthermos must be true'
1121	call abort_physic(modname,
1122	& "callmoldiff requires callthermos",1)
1123	endif
1124	if (thermochem) then
1125	print*,'if thermochem is set, callthermos must be true'
1126	call abort_physic(modname,
1127	& "thermochem requires callthermos",1)
1128	endif
1129	endif
1130
1131	! Test of incompatibility:
1132	! if photochem is used, then water should be used too
1133
1134	if (photochem.and..not.water) then
1135	print*,'if photochem is used, water should be used too'
1136	call abort_physic(modname,
1137	& "photochem requires water",1)
1138	endif
1139
1140	! if callthermos is used, then thermoswater should be used too
1141	! (if water not used already)
1142
1143	if (callthermos .and. .not.water) then
1144	if (callthermos .and. .not.thermoswater) then
1145	print*,'if callthermos is used, water or thermoswater
1146	& should be used too'
1147	call abort_physic(modname,
1148	& "callthermos requires water or thermoswater",1)
1149	endif
1150	endif
1151
1152	PRINT*,'--------------------------------------------'
1153	PRINT*
1154	PRINT*
1155	ELSE
1156	write(,)
1157	write(,) 'Cannot read file callphys.def. Is it here ?'
1158	call abort_physic(modname,
1159	& "missing callphys.def file",1)
1160	ENDIF
1161
1162	8000 FORMAT(t5,a12,l8)
1163	8001 FORMAT(t5,a12,i8)
1164
1165	PRINT*
1166	PRINT*,'conf_phys: daysec',daysec
1167	PRINT*
1168	PRINT*,'conf_phys: The radiative transfer is computed:'
1169	PRINT*,' each ',iradia,' physical time-step'
1170	PRINT,' or each ',iradiadtphys,' seconds'
1171	PRINT*
1172	! --------------------------------------------------------------
1173	! Managing the Longwave radiative transfer
1174	! --------------------------------------------------------------
1175
1176	! In most cases, the run just use the following values :
1177	! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1178	callemis=.true.
1179	! ilwd=10*int(daysec/dtphys) ! bug before 22/10/01
1180	ilwd=1
1181	ilwn=1 !2
1182	ilwb=1 !2
1183	linear=.true.
1184	ncouche=3
1185	alphan=0.4
1186	semi=0
1187
1188	! BUT people working hard on the LW may want to read them in 'radia.def'
1189	! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1190	!$OMP MASTER
1191	OPEN(99,file='radia.def',status='old',form='formatted'
1192	. ,iostat=ierr)
1193	IF(ierr.EQ.0) THEN
1194	write(,) 'conf_phys: Reading radia.def !!!'
1195	READ(99,fmt='(a)') ch1
1196	READ(99,*) callemis
1197	WRITE(*,8000) ch1,callemis
1198
1199	READ(99,fmt='(a)') ch1
1200	READ(99,*) iradia
1201	WRITE(*,8001) ch1,iradia
1202
1203	READ(99,fmt='(a)') ch1
1204	READ(99,*) ilwd
1205	WRITE(*,8001) ch1,ilwd
1206
1207	READ(99,fmt='(a)') ch1
1208	READ(99,*) ilwn
1209	WRITE(*,8001) ch1,ilwn
1210
1211	READ(99,fmt='(a)') ch1
1212	READ(99,*) linear
1213	WRITE(*,8000) ch1,linear
1214
1215	READ(99,fmt='(a)') ch1
1216	READ(99,*) ncouche
1217	WRITE(*,8001) ch1,ncouche
1218
1219	READ(99,fmt='(a)') ch1
1220	READ(99,*) alphan
1221	WRITE(,) ch1,alphan
1222
1223	READ(99,fmt='(a)') ch1
1224	READ(99,*) ilwb
1225	WRITE(*,8001) ch1,ilwb
1226
1227
1228	READ(99,fmt='(a)') ch1
1229	READ(99,'(l1)') callg2d
1230	WRITE(*,8000) ch1,callg2d
1231
1232	READ(99,fmt='(a)') ch1
1233	READ(99,*) semi
1234	WRITE(,) ch1,semi
1235	end if
1236	CLOSE(99)
1237	!$OMP END MASTER
1238	call bcast(ch1)
1239	call bcast(callemis)
1240	call bcast(iradia)
1241	call bcast(ilwd)
1242	call bcast(ilwn)
1243	call bcast(linear)
1244	call bcast(ncouche)
1245	call bcast(alphan)
1246	call bcast(ilwb)
1247	call bcast(callg2d)
1248	call bcast(semi)
1249
1250	END SUBROUTINE conf_phys
1251
1252	END MODULE conf_phys_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format