Context Navigation

conf_phys.F @ 1381

Last change on this file since 1381 was 1381, checked in by emillour, 10 years ago

Mars GCM:

Update default location for "datadir" files, now at http://www.lmd.jussieu.fr/~lmdz/planets/mars/datadir or /u/lmdz/WWW/planets/mars/datadir for local users.

File size: 27.7 KB

Line
1	SUBROUTINE conf_phys(ngrid,nlayer,nq)
2
3	!=======================================================================
4	!
5	! purpose:
6	! -------
7	!
8	! Initialisation for the physical parametrisations of the LMD
9	! martian atmospheric general circulation modele.
10	!
11	! author: Frederic Hourdin 15 / 10 /93
12	! -------
13	! modified: Sebastien Lebonnois 11/06/2003 (new callphys.def)
14	! Ehouarn Millour (oct. 2008) tracers are now identified
15	! by their names and may not be contiguously
16	! stored in the q(:,:,:,:) array
17	! E.M. (june 2009) use getin routine to load parameters
18	! adapted to the mesoscale use - Aymeric Spiga - 01/2007-07/2011
19	! separated inifis into conf_phys and phys_state_var_init (A. Spiga)
20	!
21	!
22	! arguments:
23	! ----------
24	!
25	! input:
26	! ------
27	!
28	! nq Number of tracers
29	!
30	!=======================================================================
31	!
32	!-----------------------------------------------------------------------
33	! declarations:
34	! -------------
35	! to use 'getin'
36	USE ioipsl_getincom, only : getin
37	use tracer_mod, only : nuice_sed, ccn_factor
38	use surfdat_h, only: albedo_h2o_ice, inert_h2o_ice,
39	& frost_albedo_threshold
40	use control_mod, only: ecritphy
41	use planete_h
42	USE comcstfi_h, only: daysec,dtphys
43	use dimradmars_mod, only: naerkind, name_iaer,
44	& ini_scatterers,tauvis
45
46	IMPLICIT NONE
47	#include "callkeys.h"
48	#include "datafile.h"
49	#include "microphys.h"
50
51	INTEGER,INTENT(IN) :: ngrid,nlayer,nq
52	INTEGER ig,ierr,j
53
54	CHARACTER ch1*12
55	CHARACTER ch80*80
56
57	! read in 'ecritphy' (frequency of calls to physics, in dynamical steps)
58	! (also done in dyn3d/defrun_new but not in LMDZ.COMMON)
59	call getin("ecritphy",ecritphy)
60
61	! --------------------------------------------------------------
62	! Reading the "callphys.def" file controlling some key options
63	! --------------------------------------------------------------
64
65	! check that 'callphys.def' file is around
66	OPEN(99,file='callphys.def',status='old',form='formatted'
67	& ,iostat=ierr)
68	CLOSE(99)
69
70	IF(ierr.EQ.0) THEN
71	PRINT*
72	PRINT*
73	PRINT*,'--------------------------------------------'
74	PRINT*,' conf_phys: Parameters for the physics (callphys.def)'
75	PRINT*,'--------------------------------------------'
76
77	write(,) "Directory where external input files are:"
78	datafile="/u/lmdz/WWW/planets/mars/datadir"
79	call getin("datadir",datafile) ! default path
80	write(,) " datafile = ",trim(datafile)
81
82	write(,) "Run with or without tracer transport ?"
83	tracer=.false. ! default value
84	call getin("tracer",tracer)
85	write(,) " tracer = ",tracer
86
87	write(,) "Diurnal cycle ?"
88	write(,) "(if diurnal=False, diurnal averaged solar heating)"
89	diurnal=.true. ! default value
90	call getin("diurnal",diurnal)
91	write(,) " diurnal = ",diurnal
92
93	write(,) "Seasonal cycle ?"
94	write(,) "(if season=False, Ls stays constant, to value ",
95	& "set in 'start'"
96	season=.true. ! default value
97	call getin("season",season)
98	write(,) " season = ",season
99
100	write(,) "Write some extra output to the screen ?"
101	lwrite=.false. ! default value
102	call getin("lwrite",lwrite)
103	write(,) " lwrite = ",lwrite
104
105	write(,) "Save statistics in file stats.nc ?"
106	#ifdef MESOSCALE
107	callstats=.false. ! default value
108	#else
109	callstats=.true. ! default value
110	#endif
111	call getin("callstats",callstats)
112	write(,) " callstats = ",callstats
113
114	write(,) "Save EOF profiles in file 'profiles' for ",
115	& "Climate Database?"
116	calleofdump=.false. ! default value
117	call getin("calleofdump",calleofdump)
118	write(,) " calleofdump = ",calleofdump
119
120	write(,) "Dust scenario: 1=constant dust (read from startfi",
121	& " or set as tauvis); 2=Viking scenario; =3 MGS scenario,",
122	& "=6 cold (low dust) scenario; =7 warm (high dust) scenario ",
123	& "=24,25 ... 30 :Mars Year 24, ... or 30 from TES assimilation"
124	iaervar=3 ! default value
125	call getin("iaervar",iaervar)
126	write(,) " iaervar = ",iaervar
127
128	write(,) "Reference (visible) dust opacity at 610 Pa ",
129	& "(matters only if iaervar=1)"
130	! NB: default value of tauvis is set/read in startfi.nc file
131	call getin("tauvis",tauvis)
132	write(,) " tauvis = ",tauvis
133
134	write(,) "Dust vertical distribution:"
135	write(,) "(=1 top set by topdustref parameter;",
136	& " =2 Viking scenario; =3 MGS scenario)"
137	iddist=3 ! default value
138	call getin("iddist",iddist)
139	write(,) " iddist = ",iddist
140
141	write(,) "Dust top altitude (km). (Matters only if iddist=1)"
142	topdustref= 90.0 ! default value
143	call getin("topdustref",topdustref)
144	write(,) " topdustref = ",topdustref
145
146	write(,) "Prescribed surface thermal flux (H/(rho*cp),K m/s)"
147	tke_heat_flux=0. ! default value
148	call getin("tke_heat_flux",tke_heat_flux)
149	write(,) " tke_heat_flux = ",tke_heat_flux
150	write(,) " 0 means the usual schemes are computing"
151
152	write(,) "call radiative transfer ?"
153	callrad=.true. ! default value
154	call getin("callrad",callrad)
155	write(,) " callrad = ",callrad
156
157	write(,) "call slope insolation scheme ?",
158	& "(matters only if callrad=T)"
159	#ifdef MESOSCALE
160	callslope=.true. ! default value
161	#else
162	callslope=.false. ! default value (not supported yet)
163	#endif
164	call getin("callslope",callslope)
165	write(,) " callslope = ",callslope
166
167	write(,) "call NLTE radiative schemes ?",
168	& "(matters only if callrad=T)"
169	callnlte=.false. ! default value
170	call getin("callnlte",callnlte)
171	write(,) " callnlte = ",callnlte
172
173	nltemodel=0 !default value
174	write(,) "NLTE model?"
175	write(,) "0 -> old model, static O"
176	write(,) "1 -> old model, dynamic O"
177	write(,) "2 -> new model"
178	write(,) "(matters only if callnlte=T)"
179	call getin("nltemodel",nltemodel)
180	write(,) " nltemodel = ",nltemodel
181
182	write(,) "call CO2 NIR absorption ?",
183	& "(matters only if callrad=T)"
184	callnirco2=.false. ! default value
185	call getin("callnirco2",callnirco2)
186	write(,) " callnirco2 = ",callnirco2
187
188	write(,) "New NIR NLTE correction ?",
189	$ "0-> old model (no correction)",
190	$ "1-> new correction",
191	$ "(matters only if callnirco2=T)"
192	#ifdef MESOSCALE
193	nircorr=0 !default value. this is OK below 60 km.
194	#else
195	nircorr=0 !default value
196	#endif
197	call getin("nircorr",nircorr)
198	write(,) " nircorr = ",nircorr
199
200	write(,) "call turbulent vertical diffusion ?"
201	calldifv=.true. ! default value
202	call getin("calldifv",calldifv)
203	write(,) " calldifv = ",calldifv
204
205	write(,) "call thermals ?"
206	calltherm=.false. ! default value
207	call getin("calltherm",calltherm)
208	write(,) " calltherm = ",calltherm
209
210	write(,) "call convective adjustment ?"
211	calladj=.true. ! default value
212	call getin("calladj",calladj)
213	write(,) " calladj = ",calladj
214
215	if (calltherm .and. calladj) then
216	print*,'!!! PLEASE NOTE !!!'
217	print*,'convective adjustment is on'
218	print*,'but since thermal plume model is on'
219	print*,'convadj is only activated above the PBL'
220	endif
221
222	write(,) "used latest version of yamada scheme?"
223	callyamada4=.true. ! default value
224	call getin("callyamada4",callyamada4)
225	write(,) " callyamada4 = ",callyamada4
226
227	if (calltherm .and. .not.callyamada4) then
228	print*,'!!!! WARNING WARNING WARNING !!!!'
229	print*,'if calltherm=T we strongly advise that '
230	print*,'you set the flag callyamada4 to T '
231	print*,'!!!! WARNING WARNING WARNING !!!!'
232	endif
233
234	write(,) "call Richardson-based surface layer ?"
235	callrichsl=.false. ! default value
236	call getin("callrichsl",callrichsl)
237	write(,) " callrichsl = ",callrichsl
238
239	if (calltherm .and. .not.callrichsl) then
240	print*,'WARNING WARNING WARNING'
241	print*,'if calltherm=T we strongly advise that '
242	print*,'you use the new surface layer scheme '
243	print*,'by setting callrichsl=T '
244	endif
245
246	if (calladj .and. callrichsl .and. (.not. calltherm)) then
247	print*,'You should not be calling the convective adjustment
248	& scheme with the Richardson surface-layer and without the thermals
249	&. This approach is not
250	& physically consistent and can lead to unrealistic friction
251	& values.'
252	print*,'If you want to use the Ri. surface-layer, either
253	& activate thermals OR de-activate the convective adjustment.'
254	stop
255	endif
256
257	write(,) "call CO2 condensation ?"
258	callcond=.true. ! default value
259	call getin("callcond",callcond)
260	write(,) " callcond = ",callcond
261
262	write(,)"call thermal conduction in the soil ?"
263	callsoil=.true. ! default value
264	call getin("callsoil",callsoil)
265	write(,) " callsoil = ",callsoil
266
267
268	write(,)"call Lott's gravity wave/subgrid topography ",
269	& "scheme ?"
270	calllott=.true. ! default value
271	call getin("calllott",calllott)
272	write(,)" calllott = ",calllott
273
274
275	write(,)"rad.transfer is computed every iradia",
276	& " physical timestep"
277	iradia=1 ! default value
278	call getin("iradia",iradia)
279	write(,)" iradia = ",iradia
280
281
282	write(,)"Output of the exchange coefficient mattrix ?",
283	& "(for diagnostics only)"
284	callg2d=.false. ! default value
285	call getin("callg2d",callg2d)
286	write(,)" callg2d = ",callg2d
287
288	write(,)"Rayleigh scattering : (should be .false. for now)"
289	rayleigh=.false.
290	call getin("rayleigh",rayleigh)
291	write(,)" rayleigh = ",rayleigh
292
293
294	! TRACERS:
295
296	! dustbin
297	write(,)"Transported dust ? (if >0, use 'dustbin' dust bins)"
298	dustbin=0 ! default value
299	call getin("dustbin",dustbin)
300	write(,)" dustbin = ",dustbin
301	! active
302	write(,)"Radiatively active dust ? (matters if dustbin>0)"
303	active=.false. ! default value
304	call getin("active",active)
305	write(,)" active = ",active
306
307	! Test of incompatibility:
308	! if active is used, then dustbin should be > 0
309
310	if (active.and.(dustbin.lt.1)) then
311	print*,'if active is used, then dustbin should > 0'
312	stop
313	endif
314	! doubleq
315	write(,)"use mass and number mixing ratios to predict",
316	& " dust size ?"
317	doubleq=.false. ! default value
318	call getin("doubleq",doubleq)
319	write(,)" doubleq = ",doubleq
320	! submicron
321	submicron=.false. ! default value
322	call getin("submicron",submicron)
323	write(,)" submicron = ",submicron
324
325	! Test of incompatibility:
326	! if doubleq is used, then dustbin should be 2
327
328	if (doubleq.and.(dustbin.ne.2)) then
329	print*,'if doubleq is used, then dustbin should be 2'
330	stop
331	endif
332	if (doubleq.and.submicron.and.(nq.LT.3)) then
333	print*,'If doubleq is used with a submicron tracer,'
334	print*,' then the number of tracers has to be'
335	print*,' larger than 3.'
336	stop
337	endif
338
339	! lifting
340	write(,)"dust lifted by GCM surface winds ?"
341	lifting=.false. ! default value
342	call getin("lifting",lifting)
343	write(,)" lifting = ",lifting
344
345	! Test of incompatibility:
346	! if lifting is used, then dustbin should be > 0
347
348	if (lifting.and.(dustbin.lt.1)) then
349	print*,'if lifting is used, then dustbin should > 0'
350	stop
351	endif
352
353	! free evolving dust
354	! freedust=true just says that there is no lifting and no dust opacity scaling.
355	write(,)"dust lifted by GCM surface winds ?"
356	freedust=.false. ! default value
357	call getin("freedust",freedust)
358	write(,)" freedust = ",freedust
359	if (freedust.and..not.doubleq) then
360	print*,'freedust should be used with doubleq !'
361	stop
362	endif
363	#ifndef MESOSCALE
364	! this test is valid in GCM case
365	! ... not in mesoscale case, for we want to activate mesoscale lifting
366	if (freedust.and.lifting) then
367	print*,'if freedust is used, then lifting should not be used'
368	print*,'lifting forced to false !!'
369	lifting=.false.
370	endif
371	#endif
372
373	! Dust IR opacity
374	write(,)" Wavelength for infrared opacity of dust ?"
375	write(,)" Choices are:"
376	write(,)" tes --- > 9.3 microns [default]"
377	write(,)" mcs --- > 21.6 microns"
378	!
379	! WARNING WARNING WARNING WARNING WARNING WARNING
380	!
381	! BEFORE ADDING A NEW VALUE, BE SURE THAT THE
382	! CORRESPONDING WAVELENGTH IS IN THE LOOKUP TABLE,
383	! OR AT LEAST NO TO FAR, TO AVOID FALLACIOUS INTERPOLATIONS.
384	!
385	dustiropacity="tes" !default value - is expected to shift to mcs one day
386	call getin("dustiropacity",dustiropacity)
387	write(,)" dustiropacity = ",trim(dustiropacity)
388	select case (trim(dustiropacity))
389	case ("tes")
390	dustrefir = 9.3E-6
391	case ("mcs")
392	dustrefir = 21.6E-6
393	case default
394	write(,) trim(dustiropacity),
395	& " is not a valid option for dustiropacity"
396	stop
397	end select
398
399	! callddevil
400	write(,)" dust lifted by dust devils ?"
401	callddevil=.false. !default value
402	call getin("callddevil",callddevil)
403	write(,)" callddevil = ",callddevil
404
405	! Test of incompatibility:
406	! if dustdevil is used, then dustbin should be > 0
407
408	if (callddevil.and.(dustbin.lt.1)) then
409	print*,'if dustdevil is used, then dustbin should > 0'
410	stop
411	endif
412	! sedimentation
413	write(,) "Gravitationnal sedimentation ?"
414	sedimentation=.true. ! default value
415	call getin("sedimentation",sedimentation)
416	write(,) " sedimentation = ",sedimentation
417	! activice
418	write(,) "Radiatively active transported atmospheric ",
419	& "water ice ?"
420	activice=.false. ! default value
421	call getin("activice",activice)
422	write(,) " activice = ",activice
423	! water
424	write(,) "Compute water cycle ?"
425	water=.false. ! default value
426	call getin("water",water)
427	write(,) " water = ",water
428
429	! thermal inertia feedback
430	write(,) "Activate the thermal inertia feedback ?"
431	tifeedback=.false. ! default value
432	call getin("tifeedback",tifeedback)
433	write(,) " tifeedback = ",tifeedback
434
435	! Test of incompatibility:
436
437	if (tifeedback.and..not.water) then
438	print*,'if tifeedback is used,'
439	print*,'water should be used too'
440	stop
441	endif
442
443	if (tifeedback.and..not.callsoil) then
444	print*,'if tifeedback is used,'
445	print*,'callsoil should be used too'
446	stop
447	endif
448
449	if (activice.and..not.water) then
450	print*,'if activice is used, water should be used too'
451	stop
452	endif
453
454	if (water.and..not.tracer) then
455	print*,'if water is used, tracer should be used too'
456	stop
457	endif
458
459	! water ice clouds effective variance distribution for sedimentaion
460	write(,) "effective variance for water ice clouds ?"
461	nuice_sed=0.45
462	call getin("nuice_sed",nuice_sed)
463	write(,) "water_param nueff Sedimentation:", nuice_sed
464
465	! ccn factor if no scavenging
466	write(,) "water param CCN reduc. factor ?", ccn_factor
467	ccn_factor = 4.5
468	call getin("ccn_factor",ccn_factor)
469	write(,)" ccn_factor = ",ccn_factor
470	write(,)"Careful: only used when microphys=F, otherwise"
471	write(,)"the contact parameter is used instead;"
472
473	! microphys
474	write(,)"Microphysical scheme for water-ice clouds?"
475	microphys=.false. ! default value
476	call getin("microphys",microphys)
477	write(,)" microphys = ",microphys
478
479	! microphysical parameter contact
480	write(,) "water contact parameter ?"
481	mteta = 0.95
482	call getin("mteta",mteta)
483	write(,) "mteta = ", mteta
484
485	! scavenging
486	write(,)"Dust scavenging by H2O/CO2 snowfall ?"
487	scavenging=.false. ! default value
488	call getin("scavenging",scavenging)
489	write(,)" scavenging = ",scavenging
490
491
492	! Test of incompatibility:
493	! if scavenging is used, then dustbin should be > 0
494
495	if ((microphys.and..not.doubleq).or.
496	& (microphys.and..not.water)) then
497	print*,'if microphys is used, then doubleq,'
498	print*,'and water must be used!'
499	stop
500	endif
501	if (microphys.and..not.scavenging) then
502	print*,''
503	print*,'----------------WARNING-----------------'
504	print*,'microphys is used without scavenging !!!'
505	print*,'----------------WARNING-----------------'
506	print*,''
507	endif
508
509	if ((scavenging.and..not.microphys).or.
510	& (scavenging.and.(dustbin.lt.1))) then
511	print*,'if scavenging is used, then microphys'
512	print*,'must be used!'
513	stop
514	endif
515
516	! Test of incompatibility:
517
518	write(,) "Permanent water caps at poles ?",
519	& " .true. is RECOMMENDED"
520	write(,) "(with .true., North cap is a source of water ",
521	& "and South pole is a cold trap)"
522	caps=.true. ! default value
523	call getin("caps",caps)
524	write(,) " caps = ",caps
525
526	! albedo_h2o_ice
527	write(,) "water ice albedo ?"
528	albedo_h2o_ice=0.45
529	call getin("albedo_h2o_ice",albedo_h2o_ice)
530	write(,) " albedo_h2o_ice = ",albedo_h2o_ice
531	! inert_h2o_ice
532	write(,) "water ice thermal inertia ?"
533	inert_h2o_ice=2400 ! (J.m^-2.K^-1.s^-1/2)
534	call getin("inert_h2o_ice",inert_h2o_ice)
535	write(,) " inert_h2o_ice = ",inert_h2o_ice
536	! frost_albedo_threshold
537	write(,) "frost thickness threshold for albedo ?"
538	frost_albedo_threshold=0.005 ! 5.4 mic (i.e 0.005 kg.m-2)
539	call getin("frost_albedo_threshold",
540	& frost_albedo_threshold)
541	write(,) " frost_albedo_threshold = ",
542	& frost_albedo_threshold
543
544	! call Titus crocus line -- DEFAULT IS NONE
545	write(,) "Titus crocus line ?"
546	tituscap=.false. ! default value
547	call getin("tituscap",tituscap)
548	write(,) "tituscap",tituscap
549
550
551	write(,) "photochemistry: include chemical species"
552	photochem=.false. ! default value
553	call getin("photochem",photochem)
554	write(,) " photochem = ",photochem
555
556
557	! SCATTERERS
558	write(,) "how many scatterers?"
559	naerkind=1 ! default value
560	call getin("naerkind",naerkind)
561	write(,)" naerkind = ",naerkind
562
563	! Test of incompatibility
564	c Logical tests for radiatively active water-ice clouds:
565	IF ( (activice.AND.(.NOT.water)).OR.
566	& (activice.AND.(naerkind.LT.2)) ) THEN
567	WRITE(,) 'If activice is TRUE, water has to be set'
568	WRITE(,) 'to TRUE, and "naerkind" must be at least'
569	WRITE(,) 'equal to 2.'
570	CALL ABORT
571	ELSE IF ( (.NOT.activice).AND.(naerkind.GT.1) ) THEN
572	WRITE(,) 'naerkind is greater than unity, but'
573	WRITE(,) 'activice has not been set to .true.'
574	WRITE(,) 'in callphys.def; this is not logical!'
575	CALL ABORT
576	ENDIF
577
578	!------------------------------------------
579	!------------------------------------------
580	! once naerkind is known allocate arrays
581	! -- we do it here and not in phys_var_init
582	! -- because we need to know naerkind first
583	CALL ini_scatterers(ngrid,nlayer)
584	!------------------------------------------
585	!------------------------------------------
586
587
588	c Please name the different scatterers here ----------------
589	name_iaer(1) = "dust_conrath" !! default choice is good old Conrath profile
590	IF (doubleq.AND.active) name_iaer(1) = "dust_doubleq" !! two-moment scheme
591	if (nq.gt.1) then
592	! trick to avoid problems compiling with 1 tracer
593	! and picky compilers who know name_iaer(2) is out of bounds
594	j=2
595	IF (water.AND.activice) name_iaer(j) = "h2o_ice" !! radiatively-active clouds
596	IF (submicron.AND.active) name_iaer(j) = "dust_submicron" !! JBM experimental stuff
597	endif ! of if (nq.gt.1)
598	c ----------------------------------------------------------
599
600	! THERMOSPHERE
601
602	write(,) "call thermosphere ?"
603	callthermos=.false. ! default value
604	call getin("callthermos",callthermos)
605	write(,) " callthermos = ",callthermos
606
607
608	write(,) " water included without cycle ",
609	& "(only if water=.false.)"
610	thermoswater=.false. ! default value
611	call getin("thermoswater",thermoswater)
612	write(,) " thermoswater = ",thermoswater
613
614	write(,) "call thermal conduction ?",
615	& " (only if callthermos=.true.)"
616	callconduct=.false. ! default value
617	call getin("callconduct",callconduct)
618	write(,) " callconduct = ",callconduct
619
620	write(,) "call EUV heating ?",
621	& " (only if callthermos=.true.)"
622	calleuv=.false. ! default value
623	call getin("calleuv",calleuv)
624	write(,) " calleuv = ",calleuv
625
626	write(,) "call molecular viscosity ?",
627	& " (only if callthermos=.true.)"
628	callmolvis=.false. ! default value
629	call getin("callmolvis",callmolvis)
630	write(,) " callmolvis = ",callmolvis
631
632	write(,) "call molecular diffusion ?",
633	& " (only if callthermos=.true.)"
634	callmoldiff=.false. ! default value
635	call getin("callmoldiff",callmoldiff)
636	write(,) " callmoldiff = ",callmoldiff
637
638
639	write(,) "call thermospheric photochemistry ?",
640	& " (only if callthermos=.true.)"
641	thermochem=.false. ! default value
642	call getin("thermochem",thermochem)
643	write(,) " thermochem = ",thermochem
644
645	write(,) "Method to include solar variability"
646	write(,) "0-> old method (using solarcondate); ",
647	& "1-> variability wit E10.7"
648	solvarmod=1
649	call getin("solvarmod",solvarmod)
650	write(,) " solvarmod = ",solvarmod
651
652	write(,) "date for solar flux calculation:",
653	& " (1985 < date < 2002)",
654	$ " (Only used if solvarmod=0)"
655	write(,) "(Solar min=1996.4 ave=1993.4 max=1990.6)"
656	solarcondate=1993.4 ! default value
657	call getin("solarcondate",solarcondate)
658	write(,) " solarcondate = ",solarcondate
659
660	write(,) "Solar variability as observed for MY: "
661	write(,) "Only if solvarmod=1"
662	solvaryear=24
663	call getin("solvaryear",solvaryear)
664	write(,) " solvaryear = ",solvaryear
665
666	write(,) "UV heating efficiency:",
667	& "measured values between 0.19 and 0.23 (Fox et al. 1996)",
668	& "lower values may be used to compensate low 15 um cooling"
669	euveff=0.21 !default value
670	call getin("euveff",euveff)
671	write(,) " euveff = ", euveff
672
673	if (.not.callthermos) then
674	if (thermoswater) then
675	print*,'if thermoswater is set, callthermos must be true'
676	stop
677	endif
678	if (callconduct) then
679	print*,'if callconduct is set, callthermos must be true'
680	stop
681	endif
682	if (calleuv) then
683	print*,'if calleuv is set, callthermos must be true'
684	stop
685	endif
686	if (callmolvis) then
687	print*,'if callmolvis is set, callthermos must be true'
688	stop
689	endif
690	if (callmoldiff) then
691	print*,'if callmoldiff is set, callthermos must be true'
692	stop
693	endif
694	if (thermochem) then
695	print*,'if thermochem is set, callthermos must be true'
696	stop
697	endif
698	endif
699
700	! Test of incompatibility:
701	! if photochem is used, then water should be used too
702
703	if (photochem.and..not.water) then
704	print*,'if photochem is used, water should be used too'
705	stop
706	endif
707
708	! if callthermos is used, then thermoswater should be used too
709	! (if water not used already)
710
711	if (callthermos .and. .not.water) then
712	if (callthermos .and. .not.thermoswater) then
713	print*,'if callthermos is used, water or thermoswater
714	& should be used too'
715	stop
716	endif
717	endif
718
719	PRINT*,'--------------------------------------------'
720	PRINT*
721	PRINT*
722	ELSE
723	write(,)
724	write(,) 'Cannot read file callphys.def. Is it here ?'
725	stop
726	ENDIF
727
728	8000 FORMAT(t5,a12,l8)
729	8001 FORMAT(t5,a12,i8)
730
731	PRINT*
732	PRINT*,'conf_phys: daysec',daysec
733	PRINT*
734	PRINT*,'conf_phys: The radiative transfer is computed:'
735	PRINT*,' each ',iradia,' physical time-step'
736	PRINT,' or each ',iradiadtphys,' seconds'
737	PRINT*
738	! --------------------------------------------------------------
739	! Managing the Longwave radiative transfer
740	! --------------------------------------------------------------
741
742	! In most cases, the run just use the following values :
743	! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
744	callemis=.true.
745	! ilwd=10*int(daysec/dtphys) ! bug before 22/10/01
746	ilwd=1
747	ilwn=1 !2
748	ilwb=1 !2
749	linear=.true.
750	ncouche=3
751	alphan=0.4
752	semi=0
753
754	! BUT people working hard on the LW may want to read them in 'radia.def'
755	! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
756
757	OPEN(99,file='radia.def',status='old',form='formatted'
758	. ,iostat=ierr)
759	IF(ierr.EQ.0) THEN
760	write(,) 'conf_phys: Reading radia.def !!!'
761	READ(99,fmt='(a)') ch1
762	READ(99,*) callemis
763	WRITE(*,8000) ch1,callemis
764
765	READ(99,fmt='(a)') ch1
766	READ(99,*) iradia
767	WRITE(*,8001) ch1,iradia
768
769	READ(99,fmt='(a)') ch1
770	READ(99,*) ilwd
771	WRITE(*,8001) ch1,ilwd
772
773	READ(99,fmt='(a)') ch1
774	READ(99,*) ilwn
775	WRITE(*,8001) ch1,ilwn
776
777	READ(99,fmt='(a)') ch1
778	READ(99,*) linear
779	WRITE(*,8000) ch1,linear
780
781	READ(99,fmt='(a)') ch1
782	READ(99,*) ncouche
783	WRITE(*,8001) ch1,ncouche
784
785	READ(99,fmt='(a)') ch1
786	READ(99,*) alphan
787	WRITE(,) ch1,alphan
788
789	READ(99,fmt='(a)') ch1
790	READ(99,*) ilwb
791	WRITE(*,8001) ch1,ilwb
792
793
794	READ(99,fmt='(a)') ch1
795	READ(99,'(l1)') callg2d
796	WRITE(*,8000) ch1,callg2d
797
798	READ(99,fmt='(a)') ch1
799	READ(99,*) semi
800	WRITE(,) ch1,semi
801	end if
802	CLOSE(99)
803
804	END

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format