source: trunk/LMDZ.MARS/deftank/callphys.def.GCM6 @ 3448

##General options
##~~~~~~~~~~~~~~~
#Directory where external input files are:
datadir=./datadir

# Number of outputs per sol for diagfi.nc files
outputs_per_sol=8

#Diurnal cycle ?  if diurnal=False, diurnal averaged solar heating
diurnal=.true.

#Seasonal cycle ? if season=False, Ls stays constant, to value set in "start"
season = .true.   

#write some more output on the screen ?
lwrite = .false.    

#Save statistics in file "stats.nc" ?
callstats =.true.

#Save EOF profiles in file "profiles" for Climate Database?
calleofdump = .false.

# check input fields when entering physics? 
check_physics_inputs=.false.
# check fields at the end of physics?
check_physics_outputs=.false.

## Dust scenario. Used to prescribe the dust
## ~~~~~~~~~~~~~
#  =1 Dust opt.deph read in startfi; =2 Viking scenario; =3 MGS scenario,
#  =4 Mars Year 24 from TES assimilation (old version of MY24; dust_tes.nc file)
#  =6 "cold" (low dust) scenario ; =7 "warm" (high dust) scenario
#  =8 "climatology" (our best guess of a typical Mars year) scenario
#  =24 Mars Year 24 from TES assimilation (ie: MCD reference case)
#  =25 Mars Year 25 from TES assimilation (ie: a year with a global dust storm)
#  =26 Mars Year 26 from TES assimilation
#  ...
#  =35 Mars Year 35 from observers assimilation
iaervar = 8
# Dust opacity at 610 Pa (when constant, i.e. for the iaervar=1 case)
tauvis=0.2
# Dust vertical distribution: 
# (=0: old distrib. (Pollack90), =1: top set by "topdustref",
#  =2: Viking scenario; =3 MGS scenario)
iddist  = 3
# Dust top altitude (km). (Matters only if iddist=1)
topdustref = 55.
# Dust IR opacity ref. wavelength (for dso diagnostics only)
# "tes" (9.3 microns) [default] or "mcs" (21.6 microns)
dustiropacity = tes
# Use an IR to VIS scenario conversion coefficient that is
# dependent on the GCM dust effective radius,
# instead of a fixed 2.6 coefficient ?
#(only if dustiropacity = tes ; default = .false.)
reff_driven_IRtoVIS_scenario = .true.

## Physical Parameterizations :
## ~~~~~~~~~~~~~~~~~~~~~~~~~~
# call radiative transfer ?
callrad   = .true.
# call NLTE radiative schemes ?   matters only if callrad=T
callnlte = .true.
# NLTE 15um scheme to use.
# 0-> Old scheme, static oxygen
# 1-> Old scheme, dynamic oxygen
# 2-> New scheme
nltemodel = 0
# call CO2 NIR absorption ?   matters only if callrad=T
callnirco2 = .true.
# NIR NLTE correction ? matters only if callnirco2=T
nircorr=0
# call turbulent vertical diffusion ?
calldifv  = .true.
# call convective adjustment ?
calladj  = .true.
# Thermals
calltherm = .true.
callrichsl = .true.
# call CO2 condensation ?
callcond =.true.
# call thermal conduction in the soil ?
callsoil = .true.

##Gravity Waves
# call Lott's gravity wave/subgrid topography scheme ?
calllott  = .true.
# call Lott's non-orographic gravity waves scheme?
calllott_nonoro=.true.
#Eliassen-Palm FLux(only if calllott_nonoro=.true.)
nonoro_gwd_epflux_max=5.E-4
# saturation parameter non-orographic gravity waves(only if calllott_nonoro=.true.)
nonoro_gwd_sat=1.5
# value of the dissaption coefficiet(only if calllott_nonoro=.true.)
nonoro_gwd_rdiss=0.15
# value of the max wave number
nonoro_gwd_kmax=1.E-4
# value of the min wave number
nonoro_gwd_kmin=7.E-6
# value to control the launch altitude
nonoro_gwd_xlaunch=0.6

# Impose polar cap surface albedos as observed by TES?
TESicealbedo = .true.
## Coefficient for Northern cap albedoes
TESice_Ncoef=1.6
## Coefficient for Southern cap albedoes
TESice_Scoef=1.6


## Radiative transfer options :
## ~~~~~~~~~~~~~~~~~~~~~~~~~~
# the rad.transfer is computed every "iradia" physical timestep
iradia    = 1
# Output of the exchange coefficient mattrix ? for diagnostic only
callg2d  = .false.
# Rayleigh scattering : (should be .false. for now)
rayleigh  = .false.

## Tracer (dust water, ice and/or chemical species) options :
## ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# DUST: Transported dust ? (if >0, use 'dustbin' dust bins)
dustbin    = 2
# DUST: Radiatively active dust ? (matters if dustbin>0)
active  = .true.
# DUST: use mass and number mixing ratios to predict dust size ?
doubleq   = .true.
# DUST: use a small population of dust particules (submicron dust)?
submicron = .false.
# DUST: lifted by GCM surface winds ?
lifting = .true.
# DUST: lifted by dust devils ?
callddevil = .false.
# DUST: Scavenging by H2O snowfall ?
scavenging = .true.

# DUST: freedust ?
freedust=.true.
# DUST: dustscaling_mode?
#     =0 --> freedust, tauscaling=1
#     =1 --> GCM5.3-like, tauscaling
#     =2 --> tauscaling=1,dust_rad_adjust
dustscaling_mode=2
# DUST: dust injection scheme (if >0, use 'dustinjection')
dustinjection=1
# DUST: dust injection scheme coefficient (default=0.25)
coeff_injection=0.25
# DUST: dust injection scheme initial local time (default=0.)
ti_injection=0.
# DUST: dust injection scheme final local time (default=24.)
tf_injection=24.
# DUST: Rocket Dust Storm scheme
rdstorm=.true.
# DUST: RDS detrainment coefficient (default=0.02)
coeff_detrainment=0.02
# DUST: Dust entrainment by subgrid-scale slope winds
topflows=.true.

# DUST/WATERICE: Scavenging by CO2 condensation?
scavco2cond = .true.
# DUST/WATERICE: Gravitationnal sedimentation ?
sedimentation = .true.

# WATERICE: Radiatively active transported atmospheric water ice ?
activice   = .true.
# WATER: Compute water cycle
water = .true.
# WATER: Microphysical scheme for water-ice clouds?
microphys = .true.
# WATER: Effective variance for sedimentation for the log-normal 
#        distribution of ice particles ?
nuice_sed=0.1
# WATER: contact parameter (only if temp_dependent_m = .false.)
##mteta = 0.95
# Temperature-dependent water contact parameter
temp_dependent_m = .true.
# WATER: current permanent caps at both poles. True IS RECOMMENDED
#        (with .true., North cap is a source of water and South pole
#         is a cold trap)
caps  = .true.
# WATER: Water ice albedos (old ice/fresh frost)?
# Perennial ice albedo
albedo_h2o_ice = 0.30
# Account for fresh frost ice albedo if cst_cap_albedo = .false.
cst_cap_albedo = .false.
# Fresh frost albedo (only used if cst_cap_albedo = .false.)
albedo_h2o_frost = 0.35
# Frost thickness threshold for albedo
frost_albedo_threshold = 0.005
# Frost metamorphism into old ice
refill_watercap = .false.
frost_metam_threshold = 0.05
# WATER: Water ice thermal inertia (old ice and fresh frost)
inert_h2o_ice = 800
# Sublimation latent heat (default = .true.)
latentheat_surfwater = .true.
#WATER: subgrid clouds
CLFvarying=.false.
#WATER: subgrid clouds
CLFfixval=1

# PHOTOCHEMISTRY: include chemical species 
photochem  = .false.

# SCATTERERS: set number of scatterers. must be compliant with preceding options.
naerkind = 4


## Thermospheric options :
##~~~~~~~~~~~~~~~~~~~~~~
# call thermosphere ?
callthermos = .false.
# WATER: included without cycle (only if water=.false.)
thermoswater = .false.
# call thermal conduction ? (only if callthermos=.true.)
callconduct = .false.
# call molecular viscosity ? (only if callthermos=.true.)
callmolvis = .false.
# call molecular diffusion ? (only if callthermos=.true.)
callmoldiff = .false.
# call thermospheric photochemistry ? (only if callthermos=.true.)
thermochem = .false.
# call EUV heating ? (only if callthermos=.true.)
calleuv=.false.
#Method to include solar variability?
#0-> Fixed EUV input  1-> Variability with E10.7 as observed
solvarmod=0
# fixed E10.7 value (for solvarmod=0)
# (min=80 , ave=140, max=320)
fixed_euv_value=140
#Solar variability as observed for MY? (must be between MY23 and MY32)
# (only matters if solvarmod=1)
solvaryear=24
# value for the UV heating efficiency
##(experimental values between 0.19 and 0.23, lower values may
## be used to compensate for low 15 um cooling)
euveff = 0.21