| 1 | #!/bin/bash |
|---|
| 2 | ######################################################################## |
|---|
| 3 | ######## Library of bash functions for the PEM launching script ######## |
|---|
| 4 | ######################################################################## |
|---|
| 5 | |
|---|
| 6 | # To end the launching script |
|---|
| 7 | endlaunch() { |
|---|
| 8 | # Restore the previous value of LC_NUMERIC |
|---|
| 9 | LC_NUMERIC=$OLD_LC_NUMERIC |
|---|
| 10 | |
|---|
| 11 | date |
|---|
| 12 | echo "Success: the launching script for the PEM simulation completed normally!" |
|---|
| 13 | exit 0 |
|---|
| 14 | } |
|---|
| 15 | |
|---|
| 16 | # To end the launching script with error |
|---|
| 17 | errlaunch() { |
|---|
| 18 | # Restore the previous value of LC_NUMERIC |
|---|
| 19 | LC_NUMERIC=$OLD_LC_NUMERIC |
|---|
| 20 | |
|---|
| 21 | date |
|---|
| 22 | echo "Error: an issue occured in the launching script for the PEM simulation!" |
|---|
| 23 | exit 1 |
|---|
| 24 | } |
|---|
| 25 | |
|---|
| 26 | # To check what is the job scheduler |
|---|
| 27 | function job_scheduler() { |
|---|
| 28 | if command -v squeue &> /dev/null; then |
|---|
| 29 | echo "SLURM is installed on $machine." |
|---|
| 30 | name_job="#SBATCH --job-name=" |
|---|
| 31 | kill_job="scancel" |
|---|
| 32 | submit_job="sbatch --parsable" |
|---|
| 33 | submit_dependjob="sbatch --parsable --dependency" |
|---|
| 34 | elif command -v qstat &> /dev/null; then |
|---|
| 35 | echo "PBS/TORQUE is installed on $machine." |
|---|
| 36 | name_job="#PBS -N " |
|---|
| 37 | kill_job="qdel" |
|---|
| 38 | submit_job="qsub" |
|---|
| 39 | submit_dependjob="qsub -W depend" |
|---|
| 40 | else |
|---|
| 41 | echo "Error: neither SLURM nor TORQUE/PBS is installed on $machine!" |
|---|
| 42 | echo "You need to adapt the script to your job scheduler." |
|---|
| 43 | errlaunch |
|---|
| 44 | fi |
|---|
| 45 | } |
|---|
| 46 | |
|---|
| 47 | # To check if everything necessary for the launching script is ok |
|---|
| 48 | checklaunch() { |
|---|
| 49 | # Save the current value of LC_NUMERIC and set it to a locale that uses a dot as the decimal separator |
|---|
| 50 | OLD_LC_NUMERIC=$LC_NUMERIC |
|---|
| 51 | LC_NUMERIC=en_US.UTF-8 |
|---|
| 52 | |
|---|
| 53 | if [ -v n_mars_years ] && [ ! -z "$n_mars_years" ]; then |
|---|
| 54 | if [ $(echo "$n_mars_years < 0." | bc -l) -eq 1 ]; then |
|---|
| 55 | echo "Error: the value of 'n_mars_years' must be >0!" |
|---|
| 56 | errlaunch |
|---|
| 57 | fi |
|---|
| 58 | elif [ -v n_earth_years ] && [ ! -z "$n_earth_years" ]; then |
|---|
| 59 | if [ $(echo "$n_earth_years < 0." | bc -l) -eq 1 ]; then |
|---|
| 60 | echo "Error: the value of 'n_earth_years' must be >0!" |
|---|
| 61 | errlaunch |
|---|
| 62 | fi |
|---|
| 63 | else |
|---|
| 64 | echo "Error: no number of years to be simulated has been set!" |
|---|
| 65 | errlaunch |
|---|
| 66 | fi |
|---|
| 67 | if [ $nPCM_ini -lt 2 ] || [ -z "$nPCM_ini" ]; then |
|---|
| 68 | echo "Error: the value of 'nPCM_ini' must be >1!" |
|---|
| 69 | errlaunch |
|---|
| 70 | fi |
|---|
| 71 | if [ $nPCM -lt 2 ] || [ -z "$nPCM" ]; then |
|---|
| 72 | echo "Error: the value of 'nPCM' must be >1!" |
|---|
| 73 | errlaunch |
|---|
| 74 | fi |
|---|
| 75 | if [ ! -f "PCMrun.job" ]; then |
|---|
| 76 | echo "Error: file \"PCMrun.job\" does not exist in $dir!" |
|---|
| 77 | errlaunch |
|---|
| 78 | fi |
|---|
| 79 | if [ ! -f "PEMrun.job" ]; then |
|---|
| 80 | echo "Error: file \"PEMrun.job\" does not exist in $dir!" |
|---|
| 81 | errlaunch |
|---|
| 82 | fi |
|---|
| 83 | if [ ! -f "run_PCM.def" ]; then |
|---|
| 84 | echo "Error: file \"run_PCM.def\" does not exist in $dir!" |
|---|
| 85 | errlaunch |
|---|
| 86 | fi |
|---|
| 87 | if [ ! -f "run_PEM.def" ]; then |
|---|
| 88 | echo "Error: file \"run_PEM.def\" does not exist in $dir!" |
|---|
| 89 | errlaunch |
|---|
| 90 | fi |
|---|
| 91 | if [ ! -f "context_lmdz_physics.xml" ]; then |
|---|
| 92 | echo "Error: file \"context_lmdz_physics.xml\" does not exist in $dir!" |
|---|
| 93 | errlaunch |
|---|
| 94 | fi |
|---|
| 95 | if [ ! -f "field_def_physics_mars.xml" ]; then |
|---|
| 96 | echo "Error: file \"field_def_physics_mars.xml\" does not exist in $dir!" |
|---|
| 97 | errlaunch |
|---|
| 98 | fi |
|---|
| 99 | if [ ! -f "file_def_physics_mars.xml" ]; then |
|---|
| 100 | echo "Error: file \"file_def_physics_mars.xml\" does not exist in $dir!" |
|---|
| 101 | errlaunch |
|---|
| 102 | fi |
|---|
| 103 | if [ ! -f "iodef.xml" ]; then |
|---|
| 104 | echo "Error: file \"iodef.xml\" does not exist in $dir!" |
|---|
| 105 | errlaunch |
|---|
| 106 | fi |
|---|
| 107 | if [ ! -d "out_PCM" ]; then |
|---|
| 108 | mkdir out_PCM |
|---|
| 109 | fi |
|---|
| 110 | if [ ! -d "out_PEM" ]; then |
|---|
| 111 | mkdir out_PEM |
|---|
| 112 | fi |
|---|
| 113 | if [ ! -d "starts" ]; then |
|---|
| 114 | mkdir starts |
|---|
| 115 | fi |
|---|
| 116 | if [ ! -d "diags" ]; then |
|---|
| 117 | mkdir diags |
|---|
| 118 | fi |
|---|
| 119 | if [ $mode -ne 0 ]; then |
|---|
| 120 | job_scheduler |
|---|
| 121 | fi |
|---|
| 122 | } |
|---|
| 123 | |
|---|
| 124 | # To convert Earth years into Mars years |
|---|
| 125 | convertyears() { |
|---|
| 126 | myear=686.9725 # Number of Earth days in Martian year |
|---|
| 127 | eyear=365.256363004 # Number of days in Earth year |
|---|
| 128 | convert_years=$(echo "$myear/$eyear" | bc -l) |
|---|
| 129 | convert_years=$(printf "%.4f" $convert_years) # Rounding to the 4th decimal to respect the precision of Martian year |
|---|
| 130 | if [ -v n_mars_years ]; then |
|---|
| 131 | n_myear=$n_mars_years |
|---|
| 132 | echo "Number of years to be simulated: $n_myear Martian years." |
|---|
| 133 | elif [ -v n_earth_years ]; then |
|---|
| 134 | n_myear=$(echo "$n_earth_years/$convert_years" | bc -l) |
|---|
| 135 | echo "Number of years to be simulated: $n_earth_years Earth years = $n_myear Martian years." |
|---|
| 136 | fi |
|---|
| 137 | } |
|---|
| 138 | |
|---|
| 139 | # To initialize the launching script |
|---|
| 140 | initlaunch() { |
|---|
| 141 | echo "This is a chained simulation for PEM and PCM runs in $dir on $machine by $user." |
|---|
| 142 | convertyears |
|---|
| 143 | i_myear=0. |
|---|
| 144 | iPEM=1 |
|---|
| 145 | iPCM=1 |
|---|
| 146 | if [ -f "startfi.nc" ]; then |
|---|
| 147 | cp startfi.nc starts/ |
|---|
| 148 | fi |
|---|
| 149 | if [ -f "start.nc" ]; then |
|---|
| 150 | cp start.nc starts/ |
|---|
| 151 | elif [ -f "star1D.nc" ]; then |
|---|
| 152 | cp star1D.txt starts/ |
|---|
| 153 | fi |
|---|
| 154 | if [ -f "startpem.nc" ]; then |
|---|
| 155 | cp startpem.nc starts/ |
|---|
| 156 | fi |
|---|
| 157 | |
|---|
| 158 | # Create a file to manage years of the chained simulation and store some info from the PEM runs |
|---|
| 159 | echo $i_myear $n_myear $convert_years $iPCM $iPEM $nPCM $nPCM_ini > info_PEM.txt |
|---|
| 160 | } |
|---|
| 161 | |
|---|
| 162 | # To submit the PCM runs |
|---|
| 163 | # arg1: launching mode |
|---|
| 164 | # arg2: counting method |
|---|
| 165 | # arg3: number of PCM runs to launch |
|---|
| 166 | # arg4: local number of the PCM run from which to start (optional) |
|---|
| 167 | submitPCM() { |
|---|
| 168 | find . -type f -name "PCMrun*.job" ! -name "PCMrun.job" -delete |
|---|
| 169 | ii=1 |
|---|
| 170 | if [ ! -z $4 ]; then |
|---|
| 171 | ii=$4 |
|---|
| 172 | fi |
|---|
| 173 | if [ $(echo "$i_myear < $n_myear" | bc -l) -eq 1 ]; then |
|---|
| 174 | echo "Run PCM $iPCM: call $ii/$3..." |
|---|
| 175 | if [ $1 -eq 0 ]; then # Mode: processing scripts |
|---|
| 176 | sed -i "s/^k=[0-9]\+$/k=$(echo "3 - $nPCM_ini" | bc)/" PCMrun.job |
|---|
| 177 | ./PCMrun.job |
|---|
| 178 | if [ $? -ne 0 ]; then |
|---|
| 179 | errlaunch |
|---|
| 180 | fi |
|---|
| 181 | else # Mode: submitting jobs |
|---|
| 182 | cp PCMrun.job PCMrun${iPCM}.job |
|---|
| 183 | sed -i -E "s/($name_job[^0-9]*[0-9]*[^0-9]*)[0-9]+$/\1${iPCM}/" PCMrun${iPCM}.job |
|---|
| 184 | sed -i "s/^k=[0-9]\+$/k=$(echo "3 - $nPCM_ini" | bc)/" PCMrun${iPCM}.job |
|---|
| 185 | jobID=$(eval "$submit_job PCMrun${iPCM}.job") |
|---|
| 186 | # Create a file to cancel the dependent jobs of the cycle |
|---|
| 187 | echo "#!/bin/bash" > kill_launchPEM.sh |
|---|
| 188 | chmod +x kill_launchPEM.sh |
|---|
| 189 | echo $kill_job $jobID >> kill_launchPEM.sh |
|---|
| 190 | fi |
|---|
| 191 | ((iPCM++)) |
|---|
| 192 | if [ $2 -ne 0 ]; then # Counting: PCM runs taken into account |
|---|
| 193 | i_myear=$(echo "$i_myear + 1." | bc -l) |
|---|
| 194 | fi |
|---|
| 195 | ((ii++)) |
|---|
| 196 | else |
|---|
| 197 | endlaunch |
|---|
| 198 | fi |
|---|
| 199 | for ((i = $ii; i <= $3; i++)); do |
|---|
| 200 | if [ $(echo "$i_myear < $n_myear" | bc -l) -eq 1 ]; then |
|---|
| 201 | echo "Run PCM $iPCM: call $i/$3..." |
|---|
| 202 | if [ $1 -eq 0 ]; then # Mode: processing scripts |
|---|
| 203 | sed -i "s/^k=[0-9]\+$/k=$(echo "$i + 2 - $nPCM_ini" | bc)/" PCMrun.job |
|---|
| 204 | ./PCMrun.job |
|---|
| 205 | if [ $? -ne 0 ]; then |
|---|
| 206 | errlaunch |
|---|
| 207 | fi |
|---|
| 208 | else # Mode: submitting jobs |
|---|
| 209 | cp PCMrun.job PCMrun${iPCM}.job |
|---|
| 210 | sed -i -E "s/($name_job[^0-9]*[0-9]*[^0-9]*)[0-9]+$/\1${iPCM}/" PCMrun${iPCM}.job |
|---|
| 211 | sed -i "s/^k=[0-9]\+$/k=$(echo "$i + 2 - $nPCM_ini" | bc)/" PCMrun${iPCM}.job |
|---|
| 212 | jobID=$(eval "$submit_dependjob=afterok:${jobID} PCMrun${iPCM}.job") |
|---|
| 213 | echo $kill_job $jobID >> kill_launchPEM.sh |
|---|
| 214 | fi |
|---|
| 215 | ((iPCM++)) |
|---|
| 216 | if [ $2 -ne 0 ]; then # Counting: PCM runs taken into account |
|---|
| 217 | i_myear=$(echo "$i_myear + 1." | bc -l) |
|---|
| 218 | fi |
|---|
| 219 | else |
|---|
| 220 | endlaunch |
|---|
| 221 | fi |
|---|
| 222 | done |
|---|
| 223 | } |
|---|
| 224 | |
|---|
| 225 | # To submit the PEM run |
|---|
| 226 | # arg1: launching mode |
|---|
| 227 | submitPEM() { |
|---|
| 228 | if [ $(echo "$i_myear < $n_myear" | bc -l) -eq 1 ]; then |
|---|
| 229 | echo "Run PEM $iPEM" |
|---|
| 230 | if [ $1 -eq 0 ]; then # Mode: processing scripts |
|---|
| 231 | ./PEMrun.job |
|---|
| 232 | if [ $? -ne 0 ]; then |
|---|
| 233 | errlaunch |
|---|
| 234 | fi |
|---|
| 235 | else # Mode: submitting jobs |
|---|
| 236 | sed -i -E "s/($name_job[^0-9]*[0-9]*[^0-9]*)[0-9]+$/\1${iPEM}/" PEMrun.job |
|---|
| 237 | jobID=$(eval "$submit_job PEMrun.job") |
|---|
| 238 | # Create a file to cancel the dependent jobs of the cycle |
|---|
| 239 | echo "#!/bin/bash" > kill_launchPEM.sh |
|---|
| 240 | chmod +x kill_launchPEM.sh |
|---|
| 241 | echo $kill_job $jobID >> kill_launchPEM.sh |
|---|
| 242 | fi |
|---|
| 243 | else |
|---|
| 244 | endlaunch |
|---|
| 245 | fi |
|---|
| 246 | } |
|---|
| 247 | |
|---|
| 248 | # To make one cycle of PCM and PEM runs |
|---|
| 249 | # arg1: launching mode |
|---|
| 250 | # arg2: counting method |
|---|
| 251 | # arg3: number of PCM runs to launch |
|---|
| 252 | # arg4: local number of the PCM run from which to start (optional) |
|---|
| 253 | cyclelaunch() { |
|---|
| 254 | # PCM runs |
|---|
| 255 | submitPCM $1 $2 $3 $4 |
|---|
| 256 | |
|---|
| 257 | # PEM run |
|---|
| 258 | if [ $(echo "$i_myear < $n_myear" | bc -l) -eq 1 ]; then |
|---|
| 259 | echo "Run PEM $iPEM" |
|---|
| 260 | if [ $1 -eq 0 ]; then # Mode: processing scripts |
|---|
| 261 | ./PEMrun.job |
|---|
| 262 | if [ $? -ne 0 ]; then |
|---|
| 263 | errlaunch |
|---|
| 264 | fi |
|---|
| 265 | else # Mode: submitting jobs |
|---|
| 266 | sed -i -E "s/($name_job[^0-9]*[0-9]*[^0-9]*)[0-9]+$/\1${iPEM}/" PEMrun.job |
|---|
| 267 | jobID=$(eval "$submit_dependjob=afterok:${jobID} PEMrun.job") |
|---|
| 268 | echo $kill_job $jobID >> kill_launchPEM.sh |
|---|
| 269 | fi |
|---|
| 270 | else |
|---|
| 271 | endlaunch |
|---|
| 272 | fi |
|---|
| 273 | } |
|---|
| 274 | |
|---|
| 275 | # To clean files after the starting run of the relaunch |
|---|
| 276 | # arg1: file name prefix to clean |
|---|
| 277 | # arg2: file name extension to clean |
|---|
| 278 | # arg3: file number from which to clean |
|---|
| 279 | cleanfiles() { |
|---|
| 280 | prefix=$1 |
|---|
| 281 | extension=$2 |
|---|
| 282 | if [ -z "$extension" ]; then |
|---|
| 283 | for file in ${prefix}*; do |
|---|
| 284 | num=${file#$prefix} |
|---|
| 285 | if [[ $num =~ ^[0-9]+$ ]] && [ $num -gt $3 ]; then |
|---|
| 286 | rm $file |
|---|
| 287 | fi |
|---|
| 288 | done |
|---|
| 289 | else |
|---|
| 290 | for file in ${prefix}*${extension}; do |
|---|
| 291 | num=${file#$prefix} |
|---|
| 292 | num=${num%$extension} |
|---|
| 293 | if [[ $num =~ ^[0-9]+$ ]] && [ $num -gt $3 ]; then |
|---|
| 294 | rm $file |
|---|
| 295 | fi |
|---|
| 296 | done |
|---|
| 297 | fi |
|---|
| 298 | } |
|---|
| 299 | |
|---|
| 300 | # To relaunch from PCM run |
|---|
| 301 | # arg1: launching mode |
|---|
| 302 | # arg2: counting method |
|---|
| 303 | relaunchPCM() { |
|---|
| 304 | iPCM=$(($irelaunch + 1)) |
|---|
| 305 | cleanfiles diags/diagfi .nc $irelaunch |
|---|
| 306 | cleanfiles diags/diagsoil .nc $irelaunch |
|---|
| 307 | cleanfiles diags/data2reshape .nc $irelaunch |
|---|
| 308 | cleanfiles "out_PCM/run" "" $irelaunch |
|---|
| 309 | cleanfiles starts/restart1D .txt $irelaunch |
|---|
| 310 | cleanfiles starts/restart .nc $irelaunch |
|---|
| 311 | cleanfiles starts/restartfi .nc $irelaunch |
|---|
| 312 | cp starts/restartfi${irelaunch}.nc startfi.nc |
|---|
| 313 | if [ -f "starts/restart${irelaunch}.nc" ]; then |
|---|
| 314 | cp starts/restart${irelaunch}.nc start.nc |
|---|
| 315 | elif [ -f "starts/restart1D${irelaunch}.txt" ]; then |
|---|
| 316 | cp starts/restart1D${irelaunch}.txt start1D.txt |
|---|
| 317 | fi |
|---|
| 318 | if [ $irelaunch -le $nPCM_ini ]; then |
|---|
| 319 | # PCM relaunch during the initialization cycle |
|---|
| 320 | iPEM=1 |
|---|
| 321 | if [ $2 -ne 0 ]; then # Counting: PCM runs taken into account |
|---|
| 322 | i_myear=$irelaunch |
|---|
| 323 | else # Counting: only PEM runs count |
|---|
| 324 | i_myear=0 |
|---|
| 325 | fi |
|---|
| 326 | sed -i "1s/.*/$i_myear $n_myear $convert_years $iPCM $iPEM $nPCM $nPCM_ini/" info_PEM.txt |
|---|
| 327 | cleanfiles diags/diagpem .nc $(($iPEM - 1)) |
|---|
| 328 | cleanfiles diags/diagsoilpem .nc $(($iPEM - 1)) |
|---|
| 329 | cleanfiles "out_PEM/run" "" $(($iPEM - 1)) |
|---|
| 330 | cleanfiles starts/restart1D_postPEM .txt $(($iPEM - 1)) |
|---|
| 331 | cleanfiles starts/restart_postPEM .nc $(($iPEM - 1)) |
|---|
| 332 | cleanfiles starts/restartfi_postPEM .nc $(($iPEM - 1)) |
|---|
| 333 | cleanfiles starts/restartpem .nc $(($iPEM - 1)) |
|---|
| 334 | rm -f startpem.nc |
|---|
| 335 | if [ $irelaunch -eq $(($nPCM_ini - 1)) ]; then |
|---|
| 336 | cp diags/data2reshape${irelaunch}.nc data2reshape_Y1.nc |
|---|
| 337 | cyclelaunch $1 $2 $nPCM_ini $iPCM |
|---|
| 338 | elif [ $irelaunch -eq $nPCM_ini ]; then |
|---|
| 339 | cp diags/data2reshape$(($irelaunch - 1)).nc data2reshape_Y1.nc |
|---|
| 340 | cp diags/data2reshape${irelaunch}.nc data2reshape_Y2.nc |
|---|
| 341 | submitPEM $1 # The next job is a PEM run |
|---|
| 342 | else |
|---|
| 343 | cyclelaunch $1 $2 $nPCM_ini $iPCM |
|---|
| 344 | fi |
|---|
| 345 | else |
|---|
| 346 | # PCM relaunch during a cycle |
|---|
| 347 | iPEM=$(echo "($iPCM - $nPCM_ini)/$nPCM + 1" | bc) |
|---|
| 348 | il=$(echo "($irelaunch - $nPCM_ini + 1)%$nPCM + 1" | bc) |
|---|
| 349 | if [ $2 -ne 0 ]; then # Counting: PCM runs taken into account |
|---|
| 350 | i_myear=$(($(awk "NR==$iPEM {print \$3}" "info_PEM.txt") + $il)) |
|---|
| 351 | else # Counting: only PEM runs count |
|---|
| 352 | i_myear=$(awk "NR==$iPEM {print \$3}" "info_PEM.txt") |
|---|
| 353 | fi |
|---|
| 354 | sed -i "1s/.*/$i_myear $n_myear $convert_years $iPCM $iPEM $nPCM $nPCM_ini/" info_PEM.txt |
|---|
| 355 | cleanfiles diags/diagpem .nc $(($iPEM - 1)) |
|---|
| 356 | cleanfiles diags/diagsoilpem .nc $(($iPEM - 1)) |
|---|
| 357 | cleanfiles "out_PEM/run" "" $(($iPEM - 1)) |
|---|
| 358 | cleanfiles starts/restart1D_postPEM .txt $(($iPEM - 1)) |
|---|
| 359 | cleanfiles starts/restart_postPEM .nc $(($iPEM - 1)) |
|---|
| 360 | cleanfiles starts/restartfi_postPEM .nc $(($iPEM - 1)) |
|---|
| 361 | cleanfiles starts/restartpem .nc $(($iPEM - 1)) |
|---|
| 362 | cp starts/restartpem$(($iPEM - 1)).nc startpem.nc |
|---|
| 363 | if [ $il -eq $(($nPCM - 1)) ]; then # Second to last PCM run |
|---|
| 364 | cp diags/data2reshape${irelaunch}.nc data2reshape_Y1.nc |
|---|
| 365 | cyclelaunch $1 $2 $nPCM $il |
|---|
| 366 | elif [ $il -eq $nPCM ]; then # Last PCM run so the next job is a PEM run |
|---|
| 367 | cp diags/data2reshape$(($irelaunch - 1)).nc data2reshape_Y1.nc |
|---|
| 368 | cp diags/data2reshape${irelaunch}.nc data2reshape_Y2.nc |
|---|
| 369 | submitPEM $1 |
|---|
| 370 | else |
|---|
| 371 | cyclelaunch $1 $2 $nPCM $il |
|---|
| 372 | fi |
|---|
| 373 | fi |
|---|
| 374 | } |
|---|
| 375 | |
|---|
| 376 | # To relaunch from PEM run |
|---|
| 377 | # arg1: launching mode |
|---|
| 378 | # arg2: counting method |
|---|
| 379 | relaunchPEM() { |
|---|
| 380 | iPEM=$(echo "$irelaunch + 1" | bc) |
|---|
| 381 | iPCM=$(echo "$nPCM_ini + $nPCM*($irelaunch - 1) + 1" | bc) |
|---|
| 382 | i_myear=$(awk "NR==$(($iPEM + 1)) {print \$3}" "info_PEM.txt") |
|---|
| 383 | sed -i "1s/.*/$i_myear $n_myear $convert_years $iPCM $iPEM $nPCM $nPCM_ini/" info_PEM.txt |
|---|
| 384 | cleanfiles diags/diagfi .nc $(($iPCM - 1)) |
|---|
| 385 | cleanfiles diags/diagsoil .nc $(($iPCM - 1)) |
|---|
| 386 | cleanfiles "out_PCM/run" "" $(($iPCM - 1)) |
|---|
| 387 | cleanfiles starts/restart1D .txt $(($iPCM - 1)) |
|---|
| 388 | cleanfiles starts/restart .nc $(($iPCM - 1)) |
|---|
| 389 | cleanfiles starts/restartfi .nc $(($iPCM - 1)) |
|---|
| 390 | cleanfiles diags/data2reshape .nc $(($iPCM - 1)) |
|---|
| 391 | cleanfiles diags/diagpem .nc $irelaunch |
|---|
| 392 | cleanfiles diags/diagsoilpem .nc $irelaunch |
|---|
| 393 | cleanfiles "out_PEM/run" "" $irelaunch |
|---|
| 394 | cleanfiles starts/restart1D_postPEM .txt $irelaunch |
|---|
| 395 | cleanfiles starts/restart_postPEM .nc $irelaunch |
|---|
| 396 | cleanfiles starts/restartfi_postPEM .nc $irelaunch |
|---|
| 397 | cleanfiles starts/restartpem .nc $irelaunch |
|---|
| 398 | cp starts/restartpem${irelaunch}.nc startpem.nc |
|---|
| 399 | cp starts/restartfi_postPEM${irelaunch}.nc startfi.nc |
|---|
| 400 | if [ -f "starts/restart_postPEM${irelaunch}.nc" ]; then |
|---|
| 401 | cp starts/restart_postPEM${irelaunch}.nc start.nc |
|---|
| 402 | elif [ -f "starts/restart1D_postPEM${irelaunch}.txt" ]; then |
|---|
| 403 | cp starts/restart1D_postPEM${irelaunch}.txt start1D.txt |
|---|
| 404 | fi |
|---|
| 405 | cyclelaunch $1 $2 $nPCM |
|---|
| 406 | } |
|---|
