source: trunk/LMDZ.COMMON/libf/dyn3dpar/sponge_mod_p.F90 @ 1243

module sponge_mod_p

implicit none


! sponge parameters (set/read via conf_gcm.F)
logical,save :: callsponge  ! do we use a sponge on upper layers
integer,save :: mode_sponge ! sponge mode
integer,save :: nsponge ! number of sponge layers 
real,save :: tetasponge  ! sponge time scale (s) at topmost layer


contains

      subroutine sponge_p(ucov,vcov,h,ps,dt,mode)

! Sponge routine: Quench ucov, vcov and potential temperature near the
!                 top of the model
! Depending on 'mode' relaxation of variables is towards:
! mode = 0 : h -> h_mean , ucov -> 0 , vcov -> 0
! mode = 1 : h -> h_mean , ucov -> ucov_mean , vcov -> 0
! mode >= 2 : h -> h_mean , ucov -> ucov_mean , vcov -> vcov_mean
! Number of layer over which sponge is applied is 'nsponge' (read from def file)
! Time scale for quenching at top level is given by 'tetasponge' (read from
! def file) and doubles as level indexes decrease.
! Quenching is modeled as: A(t)=Am+A0exp(-lambda*t)
! where Am is the zonal average of the field (or zero), and lambda the inverse
! of the characteristic quenching/relaxation time scale
! Thus, assuming Am to be time-independent, field at time t+dt is given by:
! A(t+dt)=A(t)-(A(t)-Am)*(1-exp(-lambda*dt))

      USE Write_Field_p
      use parallel_lmdz, only: pole_sud,pole_nord,jj_begin,jj_end
      implicit none
#include "dimensions.h"
#include "paramet.h"
#include "comdissip.h"
#include "comvert.h"
#include "comgeom2.h"
#include "iniprint.h"

! Arguments:
!------------
      real,intent(inout) :: ucov(iip1,jjp1,llm) ! covariant zonal wind
      real,intent(inout) :: vcov(iip1,jjm,llm) ! covariant meridional wind
      real,intent(inout) :: h(iip1,jjp1,llm) ! potential temperature
!      real,intent(in) :: pext(iip1,jjp1) ! extensive pressure
      real,intent(in) :: ps(iip1,jjp1) ! surface pressure (Pa)
      real,intent(in) :: dt   ! time step
      integer,intent(in) :: mode  ! sponge mode

!   Local:
!   ------

      real,save :: sig_s(llm) !sigma au milieu des couches
      REAL vm,um,hm,ptot(jjp1)
      real,save :: cst(llm)
      real :: pext(iip1,jjp1) ! extensive pressure

      INTEGER l,i,j
      integer :: jjb,jje
      integer,save :: l0 ! layer down to which sponge is applied

      real ssum

      real zkm
      logical,save :: firstcall=.true.



      if (firstcall) then
!$OMP BARRIER
!$OMP MASTER
       ! build approximative sigma levels at midlayer
        do l=1,llm
          sig_s(l)=((ap(l)+ap(l+1))/preff+bp(l)+bp(l+1))/2.
        enddo

        l0=llm-nsponge+1
 
        write(lunout,*)
        write(lunout,*)'sponge mode',mode
        write(lunout,*)'nsponge tetasponge ',nsponge,tetasponge
        write(lunout,*)'Coeffs for the sponge layer'
        write(lunout,*)'Z (km)         tau             cst'
        do l=llm,l0,-1
          ! double time scale with every level, starting from the top
          cst(l)=1.-exp(-dt/(tetasponge*2**(llm-l)))
        enddo

        do l=l0,llm
           zkm=-scaleheight*log(sig_s(l))
           print*,zkm,tetasponge*2**(llm-l),cst(l)
        enddo
        PRINT*

        firstcall=.false.
!$OMP END MASTER
!$OMP BARRIER
      endif ! of if (firstcall)

!-----------------------------------------------------------------------
!   compute sponge relaxation:
!   -------------------------
      jjb=jj_begin
      jje=jj_end+1 ! +1 because vcov(j) computations require pext(j+1) & ptot(j+1)
      IF (pole_sud)  jje=jj_end-1+1
!$OMP MASTER
      pext(1:iip1,jjb:jje)=ps(1:iip1,jjb:jje)*aire(1:iip1,jjb:jje)
      do j=jjb,jje
         ptot(j)=sum(pext(1:iim,j))
      enddo
!$OMP END MASTER
!$OMP BARRIER


!   potential temperature
      jjb=jj_begin
      jje=jj_end
!$OMP DO SCHEDULE(STATIC,OMP_CHUNK)   
      do l=l0,llm
         do j=jjb,jje
            ! compute zonal average
            hm=0.
            do i=1,iim
               hm=hm+h(i,j,l)*pext(i,j)
            enddo
            hm=hm/ptot(j)
            ! update h()
            do i=1,iim
               h(i,j,l)=h(i,j,l)-cst(l)*(h(i,j,l)-hm)
            enddo
            h(iip1,j,l)=h(1,j,l)
         enddo
      enddo
!$OMP END DO NOWAIT

!   zonal wind
      jjb=jj_begin
      jje=jj_end
      IF (pole_nord) jjb=jj_begin+1
      IF (pole_sud)  jje=jj_end-1
!$OMP DO SCHEDULE(STATIC,OMP_CHUNK)   
      do l=l0,llm
         do j=jjb,jje
            um=0.
            if(mode.ge.1) then ! compute zonal average
               do i=1,iim
                  um=um+0.5*ucov(i,j,l)*(pext(i,j)+pext(i+1,j))/cu(i,j)
               enddo
               um=um/ptot(j)
            endif
            ! update ucov()
            do i=1,iim
               ucov(i,j,l)=ucov(i,j,l)-cst(l)*(ucov(i,j,l)-um*cu(i,j))
            enddo
            ucov(iip1,j,l)=ucov(1,j,l)
         enddo
      enddo
!$OMP END DO NOWAIT

!  meridional wind
      jjb=jj_begin
      jje=jj_end
      IF (pole_sud) jje=jj_end-1
!$OMP DO SCHEDULE(STATIC,OMP_CHUNK)   
      do l=l0,llm
         do j=jjb,jje
            vm=0.
            if(mode.ge.2) then ! compute zonal average
               do i=1,iim
                  vm=vm+vcov(i,j,l)*(pext(i,j)+pext(i,j+1))/cv(i,j)
               enddo
               vm=vm/(ptot(j)+ptot(j+1))
            endif
            ! update vcov
            do i=1,iim
               vcov(i,j,l)=vcov(i,j,l)-cst(l)*(vcov(i,j,l)-vm*cv(i,j))
            enddo
            vcov(iip1,j,l)=vcov(1,j,l)
         enddo
      enddo
!$OMP END DO

      end subroutine sponge_p
      
end module sponge_mod_p