!WRF:MEDIATION_LAYER:SOLVER SUBROUTINE solve_em ( grid , config_flags & ! Arguments generated from Registry #include "dummy_new_args.inc" ! ) ! Driver layer modules USE module_state_description USE module_domain, ONLY : & domain, get_ijk_from_grid, get_ijk_from_subgrid & ,domain_get_current_time, domain_get_start_time & ,domain_get_sim_start_time, domain_clock_get USE module_domain_type, ONLY : history_alarm USE module_configure, ONLY : grid_config_rec_type USE module_driver_constants USE module_machine USE module_tiles, ONLY : set_tiles #ifdef DM_PARALLEL USE module_dm, ONLY : & local_communicator, mytask, ntasks, ntasks_x, ntasks_y & ,local_communicator_periodic, wrf_dm_maxval USE module_comm_dm, ONLY : & halo_em_a_sub,halo_em_b_sub,halo_em_c2_sub,halo_em_chem_e_3_sub & ,halo_em_chem_e_5_sub,halo_em_chem_e_7_sub,halo_em_chem_old_e_5_sub & ,halo_em_chem_old_e_7_sub,halo_em_c_sub,halo_em_d2_3_sub & ,halo_em_d2_5_sub,halo_em_d3_3_sub,halo_em_d3_5_sub,halo_em_d_sub & ,halo_em_e_3_sub,halo_em_e_5_sub,halo_em_hydro_uv_sub & ,halo_em_moist_e_3_sub,halo_em_moist_e_5_sub,halo_em_moist_e_7_sub & ,halo_em_moist_old_e_5_sub,halo_em_moist_old_e_7_sub & ,halo_em_scalar_e_3_sub,halo_em_scalar_e_5_sub,halo_em_scalar_e_7_sub & ,halo_em_scalar_old_e_5_sub,halo_em_scalar_old_e_7_sub,halo_em_tke_3_sub & ,halo_em_tke_5_sub,halo_em_tke_7_sub,halo_em_tke_advect_3_sub & ,halo_em_tke_advect_5_sub,halo_em_tke_old_e_5_sub & ,halo_em_tke_old_e_7_sub,halo_em_tracer_e_3_sub,halo_em_tracer_e_5_sub & ,halo_em_tracer_e_7_sub,halo_em_tracer_old_e_5_sub & ,halo_em_tracer_old_e_7_sub,period_bdy_em_a_sub & ,period_bdy_em_b3_sub,period_bdy_em_b_sub,period_bdy_em_chem2_sub & ,period_bdy_em_chem_old_sub,period_bdy_em_chem_sub,period_bdy_em_d3_sub & ,period_bdy_em_d_sub,period_bdy_em_e_sub,period_bdy_em_moist2_sub & ,period_bdy_em_moist_old_sub,period_bdy_em_moist_sub & ,period_bdy_em_scalar2_sub,period_bdy_em_scalar_old_sub & ,period_bdy_em_scalar_sub,period_bdy_em_tke_old_sub & ,period_bdy_em_tracer2_sub,period_bdy_em_tracer_old_sub & ,period_bdy_em_tracer_sub,period_em_da_sub,period_em_hydro_uv_sub #endif USE module_utility ! Mediation layer modules ! Model layer modules USE module_model_constants USE module_small_step_em USE module_em USE module_big_step_utilities_em USE module_bc USE module_bc_em USE module_solvedebug_em USE module_physics_addtendc USE module_diffusion_em USE module_polarfft USE module_microphysics_driver USE module_microphysics_zero_out USE module_fddaobs_driver USE module_diagnostics #ifdef WRF_CHEM USE module_input_chem_data USE module_input_tracer USE module_chem_utilities #endif USE module_first_rk_step_part1 USE module_first_rk_step_part2 USE module_llxy, ONLY : proj_cassini USE module_avgflx_em, ONLY : zero_avgflx, upd_avgflx #ifdef LMDZ USE module_lmdz_phys USE module_domain_type, ONLY: RESTART_ALARM USE module_domain, ONLY: domain_get_time_since_sim_start USE module_streams #endif IMPLICIT NONE ! Input data. TYPE(domain) , TARGET :: grid ! Definitions of dummy arguments to this routine (generated from Registry). #include "dummy_new_decl.inc" ! Structure that contains run-time configuration (namelist) data for domain TYPE (grid_config_rec_type) , INTENT(IN) :: config_flags ! Local data INTEGER :: k_start , k_end, its, ite, jts, jte INTEGER :: ids , ide , jds , jde , kds , kde , & ims , ime , jms , jme , kms , kme , & ips , ipe , jps , jpe , kps , kpe INTEGER :: sids , side , sjds , sjde , skds , skde , & sims , sime , sjms , sjme , skms , skme , & sips , sipe , sjps , sjpe , skps , skpe INTEGER :: imsx, imex, jmsx, jmex, kmsx, kmex, & ipsx, ipex, jpsx, jpex, kpsx, kpex, & imsy, imey, jmsy, jmey, kmsy, kmey, & ipsy, ipey, jpsy, jpey, kpsy, kpey INTEGER :: ij , iteration INTEGER :: im , num_3d_m , ic , num_3d_c , is , num_3d_s INTEGER :: loop INTEGER :: sz INTEGER :: iswater LOGICAL :: specified_bdy, channel_bdy REAL :: t_new ! Changes in tendency at this timestep real ,DIMENSION(grid%sm31:grid%em31,grid%sm32:grid%em32,grid%sm33:grid%em33) :: h_tendency, & z_tendency ! Whether advection should produce decoupled horizontal and vertical advective tendency outputs LOGICAL :: tenddec #ifdef WRF_CHEM ! Index cross-referencing array for tendency accumulation INTEGER, DIMENSION( num_chem ) :: adv_ct_indices #endif ! storage for tendencies and decoupled state (generated from Registry) #include ! Previous time level of tracer arrays now defined as i1 variables; ! the state 4d arrays now redefined as 1-time level arrays in Registry. ! Benefit: save memory in nested runs, since only 1 domain is active at a ! time. Potential problem on stack-limited architectures: increases ! amount of data on program stack by making these automatic arrays. INTEGER :: rc INTEGER :: number_of_small_timesteps, rk_step INTEGER :: klevel,ijm,ijp,i,j,k,size1,size2 ! for prints/plots only INTEGER :: idum1, idum2, dynamics_option INTEGER :: rk_order, iwmax, jwmax, kwmax REAL :: dt_rk, dts_rk, dts, dtm, wmax REAL , ALLOCATABLE , DIMENSION(:) :: max_vert_cfl_tmp, max_horiz_cfl_tmp LOGICAL :: leapfrog INTEGER :: l,kte,kk LOGICAL :: f_flux ! flag for computing averaged fluxes in cu_gd REAL :: curr_secs INTEGER :: num_sound_steps INTEGER :: idex, jdex REAL :: max_msft REAL :: spacing INTEGER :: ii, jj !kk is above after l,kte REAL :: dclat INTEGER :: debug_level ! urban related variables INTEGER :: NUM_ROOF_LAYERS, NUM_WALL_LAYERS, NUM_ROAD_LAYERS ! urban TYPE(WRFU_TimeInterval) :: tmpTimeInterval REAL :: real_time LOGICAL :: adapt_step_flag LOGICAL :: fill_w_flag ! variables for flux-averaging code 20091223 CHARACTER*256 :: message, message2 REAL :: old_dt TYPE(WRFU_Time) :: temp_time, CurrTime INTEGER, PARAMETER :: precision = 100 INTEGER :: num, den TYPE(WRFU_TimeInterval) :: dtInterval #ifdef LMDZ INTEGER :: im2, jm2, km2 INTEGER :: ix,iy,iz INTEGER :: days, seconds, Sn, Sd TYPE(WRFU_TimeInterval) :: timeSinceSimStart TYPE(WRFU_Time) :: initime, simtime LOGICAL :: wrftestrst, wrftestin REAL :: minSinceSimStart CHARACTER(LEN=256) :: mminlu, mminsl CHARACTER(LEN=50) :: errmsg INTEGER :: hr, minute, sec, ms, julyr, & julday REAL :: gmt errmsg = 'ERROR -- error -- ERROR -- error' im2 = config_flags%i_check_point jm2 = config_flags%j_check_point km2 = config_flags%k_check_point #endif ! Define benchmarking timers if -DBENCH is compiled #include !---------------------- ! Executable statements !---------------------- ! !
! solve_em is the main driver for advancing a grid a single timestep.
! It is a mediation-layer routine -> DM and SM calls are made where 
! needed for parallel processing.  
!
! solve_em can integrate the equations using 3 time-integration methods
!      
!    - 3rd order Runge-Kutta time integration (recommended)
!      
!    - 2nd order Runge-Kutta time integration
!      
! The main sections of solve_em are
!     
! (1) Runge-Kutta (RK) loop
!     
! (2) Non-timesplit physics (i.e., tendencies computed for updating
!     model state variables during the first RK sub-step (loop)
!     
! (3) Small (acoustic, sound) timestep loop - within the RK sub-steps
!     
! (4) scalar advance for moist and chem scalar variables (and TKE)
!     within the RK sub-steps.
!     
! (5) time-split physics (after the RK step), currently this includes
!     only microphyics
!
! A more detailed description of these sections follows.
!
! ! Initialize timers if compiled with -DBENCH #include ! set runge-kutta solver (2nd or 3rd order) dynamics_option = config_flags%rk_ord ! Obtain dimension information stored in the grid data structure. CALL get_ijk_from_grid ( grid , & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & imsx, imex, jmsx, jmex, kmsx, kmex, & ipsx, ipex, jpsx, jpex, kpsx, kpex, & imsy, imey, jmsy, jmey, kmsy, kmey, & ipsy, ipey, jpsy, jpey, kpsy, kpey ) CALL get_ijk_from_subgrid ( grid , & sids, side, sjds, sjde, skds, skde, & sims, sime, sjms, sjme, skms, skme, & sips, sipe, sjps, sjpe, skps, skpe ) k_start = kps k_end = kpe num_3d_m = num_moist num_3d_c = num_chem num_3d_s = num_scalar f_flux = config_flags%do_avgflx_cugd .EQ. 1 ! Compute these starting and stopping locations for each tile and number of tiles. ! See: http://www.mmm.ucar.edu/wrf/WG2/topics/settiles CALL set_tiles ( grid , ids , ide , jds , jde , ips , ipe , jps , jpe ) ! Max values of CFL for adaptive time step scheme ALLOCATE (max_vert_cfl_tmp(grid%num_tiles)) ALLOCATE (max_horiz_cfl_tmp(grid%num_tiles)) ! ! Calculate current time in seconds since beginning of model run. ! Unfortunately, ESMF does not seem to have a way to return ! floating point seconds based on a TimeInterval. So, we will ! calculate it here--but, this is not clean!! ! tmpTimeInterval = domain_get_current_time ( grid ) - domain_get_sim_start_time ( grid ) curr_secs = real_time(tmpTimeInterval) old_dt = grid%dt ! store old time step for flux averaging code at end of RK loop !----------------------------------------------------------------------------- ! Adaptive time step: Added by T. Hutchinson, WSI 3/5/07 ! In this call, we do the time-step adaptation and set time-dependent lateral ! boundary condition nudging weights. ! IF ( (config_flags%use_adaptive_time_step) .and. & ( (.not. grid%nested) .or. & ( (grid%nested) .and. (abs(grid%dtbc) < 0.0001) ) ) )THEN CALL adapt_timestep(grid, config_flags) adapt_step_flag = .TRUE. ELSE adapt_step_flag = .FALSE. ENDIF ! End of adaptive time step modifications !----------------------------------------------------------------------------- grid%itimestep = grid%itimestep + 1 IF (config_flags%polar) dclat = 90./REAL(jde-jds) !(0.5 * 180/ny) #ifdef WRF_CHEM kte=min(k_end,kde-1) # ifdef DM_PARALLEL if ( num_chem >= PARAM_FIRST_SCALAR ) then !----------------------------------------------------------------------- ! see matching halo calls below for stencils !-------------------------------------------------------------- CALL wrf_debug ( 200 , ' call HALO_RK_CHEM' ) IF ( config_flags%h_mom_adv_order <= 4 ) THEN # include "HALO_EM_CHEM_E_3.inc" IF( config_flags%progn > 0 ) THEN # include "HALO_EM_SCALAR_E_3.inc" ENDIF ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN # include "HALO_EM_CHEM_E_5.inc" IF( config_flags%progn > 0 ) THEN # include "HALO_EM_SCALAR_E_5.inc" ENDIF ELSE WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order CALL wrf_error_fatal(TRIM(wrf_err_message)) ENDIF ENDIF if ( num_tracer >= PARAM_FIRST_SCALAR ) then !----------------------------------------------------------------------- ! see matching halo calls below for stencils !-------------------------------------------------------------- CALL wrf_debug ( 200 , ' call HALO_RK_tracer' ) IF ( config_flags%h_mom_adv_order <= 4 ) THEN # include "HALO_EM_TRACER_E_3.inc" ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN # include "HALO_EM_TRACER_E_5.inc" ELSE WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order CALL wrf_error_fatal(TRIM(wrf_err_message)) ENDIF ENDIF # endif !-------------------------------------------------------------- adv_ct_indices( : ) = 1 IF ( config_flags%chemdiag == USECHEMDIAG ) THEN ! modify tendency list here ! note that the referencing direction here is opposite of that in chem_driver adv_ct_indices(p_co ) = p_advh_co adv_ct_indices(p_o3 ) = p_advh_o3 adv_ct_indices(p_no ) = p_advh_no adv_ct_indices(p_no2 ) = p_advh_no2 adv_ct_indices(p_hno3) = p_advh_hno3 adv_ct_indices(p_iso ) = p_advh_iso adv_ct_indices(p_ho ) = p_advh_ho adv_ct_indices(p_ho2 ) = p_advh_ho2 END IF #endif rk_order = config_flags%rk_ord IF ( grid%time_step_sound == 0 ) THEN ! This function will give 4 for 6*dx and 6 for 10*dx and returns even numbers only spacing = min(grid%dx, grid%dy) IF ( ( config_flags%use_adaptive_time_step ) .AND. ( config_flags%map_proj == PROJ_CASSINI ) ) THEN max_msft=MIN ( MAX(grid%max_msftx, grid%max_msfty) , & 1.0/COS(config_flags%fft_filter_lat*degrad) ) num_sound_steps = max ( 2 * ( INT (300. * grid%dt / (spacing / max_msft) - 0.01 ) + 1 ), 4 ) ELSE IF ( config_flags%use_adaptive_time_step ) THEN max_msft= MAX(grid%max_msftx, grid%max_msfty) num_sound_steps = max ( 2 * ( INT (300. * grid%dt / (spacing / max_msft) - 0.01 ) + 1 ), 4 ) ELSE num_sound_steps = max ( 2 * ( INT (300. * grid%dt / spacing - 0.01 ) + 1 ), 4 ) END IF WRITE(wrf_err_message,*)'grid spacing, dt, time_step_sound=',spacing,grid%dt,num_sound_steps CALL wrf_debug ( 50 , wrf_err_message ) ELSE num_sound_steps = grid%time_step_sound ENDIF dts = grid%dt/float(num_sound_steps) IF (config_flags%use_adaptive_time_step) THEN CALL get_wrf_debug_level( debug_level ) IF ((config_flags%time_step < 0) .AND. (debug_level.GE.50)) THEN #ifdef DM_PARALLEL CALL wrf_dm_maxval(grid%max_vert_cfl, idex, jdex) #endif WRITE(wrf_err_message,*)'variable dt, max horiz cfl, max vert cfl: ',& grid%dt, grid%max_horiz_cfl, grid%max_vert_cfl CALL wrf_debug ( 0 , wrf_err_message ) ENDIF grid%max_cfl_val = 0 grid%max_horiz_cfl = 0 grid%max_vert_cfl = 0 ENDIF ! setting bdy tendencies to zero for DFI if constant_bc = true !$OMP PARALLEL DO & !$OMP PRIVATE ( ij ) DO ij = 1 , grid%num_tiles ! IF( config_flags%specified .AND. grid%dfi_opt .NE. DFI_NODFI & ! .AND. config_flags%constant_bc .AND. (grid%dfi_stage .EQ. DFI_BCK .OR. grid%dfi_stage .EQ. DFI_FWD) ) THEN IF( config_flags%specified .AND. config_flags%constant_bc ) THEN CALL zero_bdytend (grid%u_btxs,grid%u_btxe,grid%u_btys,grid%u_btye, & grid%v_btxs,grid%v_btxe,grid%v_btys,grid%v_btye, & grid%ph_btxs,grid%ph_btxe,grid%ph_btys,grid%ph_btye, & grid%t_btxs,grid%t_btxe,grid%t_btys,grid%t_btye, & grid%w_btxs,grid%w_btxe,grid%w_btys,grid%w_btye, & grid%mu_btxs,grid%mu_btxe,grid%mu_btys,grid%mu_btye, & moist_btxs,moist_btxe, & moist_btys,moist_btye, & grid%spec_bdy_width,num_3d_m, & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & ips,ipe, jps,jpe, kps,kpe, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) ENDIF ENDDO !$OMP END PARALLEL DO !********************************************************************** ! ! LET US BEGIN....... ! ! !
! (1) RK integration loop is named the "Runge_Kutta_loop:"
!
!   Predictor-corrector type time integration.
!   Advection terms are evaluated at time t for the predictor step,
!   and advection is re-evaluated with the latest predicted value for
!   each succeeding time corrector step
!
!   2nd order Runge Kutta (rk_order = 2):
!   Step 1 is taken to the midpoint predictor, step 2 is the full step.
!
!   3rd order Runge Kutta (rk_order = 3):
!   Step 1 is taken to from t to dt/3, step 2 is from t to dt/2,
!   and step 3 is from t to dt.
!
!   non-timesplit physics are evaluated during first RK step and
!   these physics tendencies are stored for use in each RK pass.
!
! !********************************************************************** Runge_Kutta_loop: DO rk_step = 1, rk_order ! Set the step size and number of small timesteps for ! each part of the timestep dtm = grid%dt IF ( rk_order == 1 ) THEN write(wrf_err_message,*)' leapfrog removed, error exit for dynamics_option = ',dynamics_option CALL wrf_error_fatal( wrf_err_message ) ELSE IF ( rk_order == 2 ) THEN ! 2nd order Runge-Kutta timestep IF ( rk_step == 1) THEN dt_rk = 0.5*grid%dt dts_rk = dts number_of_small_timesteps = num_sound_steps/2 ELSE dt_rk = grid%dt dts_rk = dts number_of_small_timesteps = num_sound_steps ENDIF ELSE IF ( rk_order == 3 ) THEN ! third order Runge-Kutta IF ( rk_step == 1) THEN dt_rk = grid%dt/3. dts_rk = dt_rk number_of_small_timesteps = 1 ELSE IF (rk_step == 2) THEN dt_rk = 0.5*grid%dt dts_rk = dts number_of_small_timesteps = num_sound_steps/2 ELSE dt_rk = grid%dt dts_rk = dts number_of_small_timesteps = num_sound_steps ENDIF ELSE write(wrf_err_message,*)' unknown solver, error exit for dynamics_option = ',dynamics_option CALL wrf_error_fatal( wrf_err_message ) END IF ! Ensure that polar meridional velocity is zero IF (config_flags%polar) THEN !$OMP PARALLEL DO & !$OMP PRIVATE ( ij ) DO ij = 1 , grid%num_tiles CALL zero_pole ( grid%v_1, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) CALL zero_pole ( grid%v_2, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) END DO !$OMP END PARALLEL DO END IF ! ! Time level t is in the *_2 variable in the first part ! of the step, and in the *_1 variable after the predictor. ! the latest predicted values are stored in the *_2 variables. ! #ifdef LMDZ1 WRITE(message, *)' dyn_em: before rk_step_prep rk_step=', rk_step CALL wrf_debug(200, message) WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2), & ' u_tend: ', ru_tendf(im2,1,jm2) CALL wrf_debug(200, message) WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2), & 'p sfc: ',p8w(im2,kms,jm2) CALL wrf_debug(200, message) WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2) CALL wrf_debug(200, message) #endif CALL wrf_debug ( 200 , ' call rk_step_prep ' ) BENCH_START(step_prep_tim) !$OMP PARALLEL DO & !$OMP PRIVATE ( ij ) DO ij = 1 , grid%num_tiles CALL rk_step_prep ( config_flags, rk_step, & grid%u_2, grid%v_2, grid%w_2, grid%t_2, grid%ph_2, grid%mu_2, & moist, & grid%ru, grid%rv, grid%rw, grid%ww, grid%php, grid%alt, grid%muu, grid%muv, & grid%mub, grid%mut, grid%phb, grid%pb, grid%p, grid%al, grid%alb, & cqu, cqv, cqw, & grid%msfux, grid%msfuy, grid%msfvx, grid%msfvx_inv, & grid%msfvy, grid%msftx, grid%msfty, & grid%fnm, grid%fnp, grid%dnw, grid%rdx, grid%rdy, & num_3d_m, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) END DO !$OMP END PARALLEL DO BENCH_END(step_prep_tim) #ifdef LMDZ1 WRITE(message, *)' dyn_em: after rk_step_prep' CALL wrf_debug(200, message) WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2), & ' u_tend: ', ru_tendf(im2,1,jm2) CALL wrf_debug(200, message) WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2), & 'p sfc: ',p8w(im2,kms,jm2) CALL wrf_debug(200, message) WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2) CALL wrf_debug(200, message) #endif #ifdef DM_PARALLEL !----------------------------------------------------------------------- ! Stencils for patch communications (WCS, 29 June 2001) ! Note: the small size of this halo exchange reflects the ! fact that we are carrying the uncoupled variables ! as state variables in the mass coordinate model, as ! opposed to the coupled variables as in the height ! coordinate model. ! ! * * * * * ! * * * * * * * * * ! * + * * + * * * + * * ! * * * * * * * * * ! * * * * * ! ! 3D variables - note staggering! ru(X), rv(Y), ww(Z), php(Z) ! ! ru x ! rv x ! ww x ! php x ! alt x ! ph_2 x ! phb x ! ! the following are 2D (xy) variables ! ! muu x ! muv x ! mut x !-------------------------------------------------------------- # include "HALO_EM_A.inc" #endif ! set boundary conditions on variables ! from big_step_prep for use in big_step_proc #ifdef DM_PARALLEL # include "PERIOD_BDY_EM_A.inc" #endif BENCH_START(set_phys_bc_tim) !$OMP PARALLEL DO & !$OMP PRIVATE ( ij, ii, jj, kk ) DO ij = 1 , grid%num_tiles CALL wrf_debug ( 200 , ' call rk_phys_bc_dry_1' ) CALL rk_phys_bc_dry_1( config_flags, grid%ru, grid%rv, grid%rw, grid%ww, & grid%muu, grid%muv, grid%mut, grid%php, grid%alt, grid%p, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) CALL set_physical_bc3d( grid%al, 'p', config_flags, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start , k_end ) CALL set_physical_bc3d( grid%ph_2, 'w', config_flags, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & ips, ipe, jps, jpe, kps, kpe, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) #ifdef LMDZ1 WRITE(message, *)' dyn_em: before polar' CALL wrf_debug(200, message) WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2), & ' u_tend: ', ru_tendf(im2,1,jm2) CALL wrf_debug(200, message) WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2), & 'p sfc: ',p8w(im2,kms,jm2) CALL wrf_debug(200, message) WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2) CALL wrf_debug(200, message) #endif IF (config_flags%polar) THEN !------------------------------------------------------- ! lat-lon grid pole-point (v) specification (extrapolate v, rv to the pole) !------------------------------------------------------- CALL pole_point_bc ( grid%v_1, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) CALL pole_point_bc ( grid%v_2, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & grid%i_start(ij), grid%i_end(ij), & grid%j_start(ij), grid%j_end(ij), & k_start, k_end ) !------------------------------------------------------- ! end lat-lon grid pole-point (v) specification !------------------------------------------------------- ENDIF END DO !$OMP END PARALLEL DO BENCH_END(set_phys_bc_tim) rk_step_is_one : IF (rk_step == 1) THEN ! only need to initialize diffusion tendencies ! !
!(2) The non-timesplit physics begins with a call to "phy_prep"
!    (which computes some diagnostic variables such as temperature,
!    pressure, u and v at p points, etc).  This is followed by
!    calls to the physics drivers:
!
!              radiation,
!              surface,
!              pbl,
!              cumulus,
!              fddagd,
!              3D TKE and mixing.
!
!

#ifdef LMDZ
       WRITE(message, *)'  dyn_em:  pre step1'
       CALL wrf_debug(200, message)
       WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
         ' u_tend: ', ru_tendf(im2,1,jm2)
       CALL wrf_debug(200, message)
       IF (config_flags%lmdz_physics) THEN
         IF (config_flags%mp_physics + config_flags%ra_lw_physics +                  &
           config_flags%ra_sw_physics + config_flags%sf_sfclay_physics +             &
           config_flags%bl_pbl_physics + config_flags%cu_physics /= 0) THEN
           PRINT *,TRIM(errmsg)
           PRINT *,'  LMDZ physics are selected from namelist. lmdz_physics= ',      &
             config_flags%lmdz_physics
           PRINT *,'  Which requires no WRF physics schemes [0 value] and tey are not:'
           PRINT '(2(A12,1x,I2,8x))','    mp =', config_flags%mp_physics,'ra_lw =',  &
             config_flags%ra_lw_physics
           PRINT '(2(A12,1x,I2,8x))','    ra_sw =', config_flags%ra_sw_physics,      &
             'sf_sfclay =',config_flags%sf_sfclay_physics
           PRINT '(2(A12,1x,I2,8x))','    bl_pbl =', config_flags%bl_pbl_physics,    &
             'cu =', config_flags%cu_physics
           message = 'WRONG namelist ste-up'
           CALL wrf_error_fatal(TRIM(message))
         END IF

       END IF
     WRITE(message, *)'  dyn_em: before step1' 
     CALL wrf_debug(200, message)
     WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
       ' u_tend: ', ru_tendf(im2,1,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
       'p sfc: ',p8w(im2,kms,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
     CALL wrf_debug(200, message)

#endif

       CALL first_rk_step_part1 (    grid, config_flags         &
                             , moist , moist_tend               &
                             , chem  , chem_tend                &
                             , tracer, tracer_tend              &
                             , scalar , scalar_tend             &
                             , fdda3d, fdda2d                   &
                             , ru_tendf, rv_tendf               &
                             , rw_tendf, t_tendf                &
                             , ph_tendf, mu_tendf               &
                             , tke_tend                         &
                             , adapt_step_flag , curr_secs      &
                             , psim , psih , wspd , gz1oz0      &
                             , br , chklowq                     &
                             , cu_act_flag , hol , th_phy       &
                             , pi_phy , p_phy , grid%t_phy      &
                             , u_phy , v_phy                    &
                             , dz8w , p8w , t8w , rho_phy , rho &
                             , ids, ide, jds, jde, kds, kde     &
                             , ims, ime, jms, jme, kms, kme     &
                             , ips, ipe, jps, jpe, kps, kpe     &
                             , imsx, imex, jmsx, jmex, kmsx, kmex    &
                             , ipsx, ipex, jpsx, jpex, kpsx, kpex    &
                             , imsy, imey, jmsy, jmey, kmsy, kmey    &
                             , ipsy, ipey, jpsy, jpey, kpsy, kpey    &
                             , k_start , k_end                  &
                             , f_flux                           &
                            )

#ifdef LMDZ1
       WRITE(message, *)'  dyn_em: post step1 pre lmdz' 
       CALL wrf_debug(200, message)
       WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
         ' u_tend: ', ru_tendf(im2,1,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
         'p sfc: ',p8w(im2,kms,jm2)
       CALL wrf_debug(200, message)
     WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
     CALL wrf_debug(200, message)
#endif

#ifdef DM_PARALLEL
       IF ( config_flags%bl_pbl_physics == MYNNPBLSCHEME2 .OR. &
            config_flags%bl_pbl_physics == MYNNPBLSCHEME3 ) THEN
#        include "HALO_EM_SCALAR_E_5.inc"
       ENDIF
#endif

#ifdef LMDZ
!!! Using grid%clock & domain_get_sim_start_time
!!!!
       initime = domain_get_start_time(grid)
       CALL domain_clock_get(grid, current_time = simtime)
!!       timeSinceSimStart = domain_get_time_since_sim_start( grid )
       timeSinceSimStart = simtime - initime
       CALL WRFU_TimeIntervalGet( timeSinceSimStart,                &
         D=days, S=seconds, Sn=Sn, Sd=Sd, rc=rc )
       IF ( rc /= WRFU_SUCCESS ) THEN
         CALL wrf_error_fatal ( &
           'domain_clock_get:  WRFU_TimeIntervalGet() failed' )
       ENDIF
       ! get rid of hard-coded constants
       minSinceSimStart = ( REAL( days ) * 24. * 60. ) + &
         ( REAL( seconds ) / 60. )
       IF ( Sd /= 0 ) THEN
         minSinceSimStart = minSinceSimStart + &
           ( ( REAL( Sn ) / REAL( Sd ) ) / 60. )
       ENDIF
       IF (minSinceSimStart == 0. .AND. grid%id == 1) THEN
         PRINT *,'  WRF+LMDZ: simulation is starting or comes from a restart!'
         PRINT *,'    since ', minSinceSimStart,' minutes has passed since it started'
!!        wrftestrst = .TRUE.
         wrftestrst = .TRUE.
       ELSE
         wrftestrst = .FALSE.
       END IF
       PRINT *,'   Lluis: minSinceSimStart: ', minSinceSimStart
! Checking for time for input from auxiliar input 4
       IF( WRFU_AlarmIsRinging( grid%alarms( first_auxinput + 3 ), rc=rc ) ) THEN
         PRINT *,'  WRF lowbdy time-step!!!!!'
         wrftestin = .TRUE.
         CALL WRFU_AlarmRingerOff( grid%alarms( first_auxinput + 3 ), rc=rc )
       ELSE
         wrftestin = .FALSE.
       END IF

       PRINT *,'   grid id: ',grid%id

       CALL nl_get_mminlu ( grid%id, mminlu )
       IF (config_flags%sf_surface_physics == RUCLSMSCHEME) THEN
         mminsl = 'STAS-RUC'
       ELSE
         mminsl = 'STAS'
       END IF

       grid%qv_2 = moist(:,:,:,P_QV)

! L. Fita, LMD. July 2014. Getting hour of the day
       CALL domain_clock_get( grid, current_time=CurrTime )
       CALL WRFU_TimeGet( CurrTime, YY= julyr, dayOfYear=julday, H=hr, M=minute, S=sec, MS=ms, rc=rc)
! Julian day hour (0, 1) !!
       gmt=(hr+real(minute)/60.+real(sec)/3600.+real(ms)/(1000*3600))/24.

! Checking for NaNs (should not be necessary but....)
   im2 = ims + (ime - ims) / 2
   jm2 = jms + (jme - jms) / 2
   DO iz = kms, kme

     IF (grid%t_2(im2,iz,jm2) /= grid%t_2(im2,iz,jm2) .OR. ABS(grid%t_2(im2,iz,jm2)) > 10000. ) THEN
       PRINT *,TRIM(errmsg)
       WRITE(wrF_err_message,*)'solve_em: wrong T value=',                 &
         grid%t_2(im2,iz,jm2),' at: ', im2,', ', iz,', ', jm2,' !!!'
#ifdef DM_PARALLEL
       CALL wrf_error_fatal(TRIM(wrf_err_message))
#else
       PRINT *,TRIM(wrf_err_message)
       STOP
#endif
     END IF
   END DO
! Checking for NaNs (should not be necessary but....)
   IF (grid%psfc(im2,jm2) /= grid%psfc(im2,jm2) .OR. ABS(grid%psfc(im2,jm2)) > 1000000. ) THEN
     PRINT *,errmsg
     WRITE(wrF_err_message,*)'solve_em: wrong PSFC value=',               &
       grid%psfc(im2,jm2),' at: ', im2 ,', ', jm2, ' !!!'
#ifdef DM_PARALLEL
     CALL wrf_error_fatal(TRIM(wrf_err_message))
#else
     PRINT *,TRIM(wrf_err_message)
     STOP
#endif
   END IF

       IF (config_flags%lmdz_physics) THEN

         CALL call_lmdz_phys(                                                        &
        & WRF_GRID=grid, WRF_XTIME=grid%xtime,                                       &
        & WRF_RESTART_ALARM=WRFU_AlarmIsRinging( grid%alarms( RESTART_ALARM ), rc=rc)&
        &       ,WRF_LON = grid%xlong, WRF_LAT=grid%xlat,                            &
        &        WRF_T=grid%t_2, WRF_U=grid%u_2, WRF_V=grid%v_2,                     &
        &        WRF_PERP=grid%P, WRF_BASEP=grid%PB,                                 &
        &        WBDYW=config_flags%spec_bdy_width, WRF_ISRESTART=wrftestrst,        &
        &        WRF_ISLOWBDYIN=wrftestin                                            &
                  ! Dimension arguments
        &             ,WIDS=ids,WIDE=ide, WJDS=jds,WJDE=jde, WKDS=kds,WKDE=kde       &
        &             ,WIMS=ims,WIME=ime, WJMS=jms,WJME=jme, WKMS=kms,WKME=kme       &
        &             ,WIPS=ips,WIPE=ipe, WJPS=jps,WJPE=jpe, WKPS=kps,WKPE=kpe       &
        &             ,WI_START=grid%i_start,WI_END=MIN(grid%i_end, ide-1)           &
        &             ,WJ_START=grid%j_start,WJ_END=MIN(grid%j_end, jde-1)           &
        &             ,WKTS=k_start, WKTE=MIN(k_end,kde-1)                           &
        &             ,WNUM_TILES=grid%num_tiles                                     &
        &             ,WNUM3DM=num_3d_m, WPARFIRSTSCAL=PARAM_FIRST_SCALAR,           &
        &        WNX=config_flags%e_we, WNY=config_flags%e_sn,                       &
        &        WNZ=config_flags%e_vert, WJULDAY=FLOAT(julday), WGMT=gmt,           &
        &        WTIME_STEP=REAL(config_flags%time_step),                            &
        &        WRF_FULLETA=grid%znw, WRF_HALFETA=grid%znu, WRF_DFULLETA=grid%dnw,  &
        &        WRF_FULLPRES=p8w, WRF_PERGEOPOT=grid%ph_2,                          &
        &        WRF_BASEGEOPOT=grid%phb,                                            &
        &        WRF_MOIST=grid%moist, WRF_W=grid%w_2,                               &
        &        WRF_PTOP=config_flags%p_top_requested,                              &
        &        WRF_PERMASS=grid%mu_1, WRF_BASEMASS=grid%mub,                       &
        &        WRF_MUT=grid%mut, WRF_MUU=grid%muu, WRF_MUV=grid%muv,               &
        &        WRF_MAPFAC=grid%msft,                                      &
!!        &        WRF_UTEND=grid%ru_tend, WRF_VTEND=grid%rv_tend,                     &
!!        &        WRF_TTEND=t_tend,                                                   &
        &        WRF_UTEND=ru_tendf, WRF_VTEND=rv_tendf,                     &
        &        WRF_TTEND=t_tendf,                                                  &
        &        WRF_MOISTTEND=moist_tend, WRF_PSFCTEND=grid%dpsdt,                  &
        &        WRF_QVID=P_QV, WRF_QCID=P_QC, WRF_QRID=P_QR,                        &
        &        WRF_QSID=P_QS, WRF_QIID=P_QI, WRF_QHID=P_QH, WRF_QGID=P_QG,         &
! L. Fita. July 2013. Now defined as local dummy variables
!        &        WRF_DUDYN=???????????????, WRF_PVTHETA=????????????????????????,   &
!        &        WRF_CLESPHY=?????????????, WRF_PRESNIVS=???????????????????????,   &
        &        WRF_MAPFT=grid%msft, WRF_MAPFU=grid%msfu, WRF_MAPFV=grid%msfv,      &
        &        WRF_DX=grid%dx, WRF_DY=grid%dy,                &
        &        WRF_DBG=model_config_rec%debug_level, LANDCAT=mminlu,               &
        &        SOILCAT=mminsl,                                                     &
        &        WRF_L_PBL=config_flags%lmdz_iflag_pbl,                              &
        &        WRF_L_CON=config_flags%lmdz_iflag_con,                              &
        &        WRF_L_THERMALS=config_flags%lmdz_iflag_thermals,                    &
        &        WRF_L_WAKE=config_flags%lmdz_iflag_wake,                            &
        &        wrf_nsoillayers=config_flags%num_soil_layers,                       &
        &        ICHECK_P=config_flags%i_check_point,                                &
        &        JCHECK_P=config_flags%j_check_point,                                &
        &        KCHECK_P=config_flags%k_check_point                                 &
        &                                                 )
       END IF
#endif

#ifdef LMDZ1
       WRITE(message, *)'  dyn_em: post lmdz pre step2 rk_step:', rk_step
       CALL wrf_debug(200, message)
       WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
         ' u_tend: ', ru_tendf(im2,1,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
         'p sfc: ',p8w(im2,kms,jm2)
       CALL wrf_debug(200, message)
     WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
     CALL wrf_debug(200, message)
#endif

       CALL first_rk_step_part2 (    grid, config_flags         &
                             , moist , moist_tend               &
                             , chem  , chem_tend                &
                             , tracer, tracer_tend              &
                             , scalar , scalar_tend             &
                             , fdda3d, fdda2d                   &
                             , ru_tendf, rv_tendf               &
                             , rw_tendf, t_tendf                &
                             , ph_tendf, mu_tendf               &
                             , tke_tend                         &
                             , adapt_step_flag , curr_secs      &
                             , psim , psih , wspd , gz1oz0      &
                             , br , chklowq                     &
                             , cu_act_flag , hol , th_phy       &
                             , pi_phy , p_phy , grid%t_phy      &
                             , u_phy , v_phy                    &
                             , dz8w , p8w , t8w , rho_phy , rho &
                             , nba_mij, num_nba_mij             & !JDM 
                             , nba_rij, num_nba_rij             & !JDM  
                             , ids, ide, jds, jde, kds, kde     &
                             , ims, ime, jms, jme, kms, kme     &
                             , ips, ipe, jps, jpe, kps, kpe     &
                             , imsx, imex, jmsx, jmex, kmsx, kmex    &
                             , ipsx, ipex, jpsx, jpex, kpsx, kpex    &
                             , imsy, imey, jmsy, jmey, kmsy, kmey    &
                             , ipsy, ipey, jpsy, jpey, kpsy, kpey    &
                             , k_start , k_end                  &
                            )

     END IF rk_step_is_one

#ifdef LMDZ1
     WRITE(message, *)'  dyn_em: post step2 pre rk_tendency rk_step: ',rk_step
     CALL wrf_debug(200, message)
     WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
       ' u_tend: ', ru_tendf(im2,1,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
       'p sfc: ',p8w(im2,kms,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
     CALL wrf_debug(200, message)
#endif

BENCH_START(rk_tend_tim)
     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij )
     DO ij = 1 , grid%num_tiles

       CALL wrf_debug ( 200 , ' call rk_tendency' )
       CALL rk_tendency ( config_flags, rk_step                                                                &
                         ,grid%ru_tend, grid%rv_tend, rw_tend, ph_tend, t_tend                                 &
                         ,ru_tendf, rv_tendf, rw_tendf, ph_tendf, t_tendf                                      &
                         ,mu_tend, grid%u_save, grid%v_save, w_save, ph_save                                   &
                         ,grid%t_save, mu_save, grid%rthften                                                   &
                         ,grid%ru, grid%rv, grid%rw, grid%ww                                                   &
                         ,grid%u_2, grid%v_2, grid%w_2, grid%t_2, grid%ph_2                                    &
                         ,grid%u_1, grid%v_1, grid%w_1, grid%t_1, grid%ph_1                                    &
                         ,grid%h_diabatic, grid%phb, grid%t_init                                               &
                         ,grid%mu_2, grid%mut, grid%muu, grid%muv, grid%mub                                    &
                         ,grid%al, grid%alt, grid%p, grid%pb, grid%php, cqu, cqv, cqw                          &
                         ,grid%u_base, grid%v_base, grid%t_base, grid%qv_base, grid%z_base                     &
                         ,grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv                                    &
                         ,grid%msfvy, grid%msftx,grid%msfty, grid%clat, grid%f, grid%e, grid%sina, grid%cosa   &
                         ,grid%fnm, grid%fnp, grid%rdn, grid%rdnw                                              &
                         ,grid%dt, grid%rdx, grid%rdy, grid%khdif, grid%kvdif, grid%xkmh, grid%xkhh            &
                         ,grid%diff_6th_opt, grid%diff_6th_factor                                              &
                         ,grid%dampcoef,grid%zdamp,config_flags%damp_opt,config_flags%rad_nudge                &
                         ,grid%cf1, grid%cf2, grid%cf3, grid%cfn, grid%cfn1, num_3d_m                          &
                         ,config_flags%non_hydrostatic, config_flags%top_lid                                   &
                         ,grid%u_frame, grid%v_frame                                                           &
                         ,ids, ide, jds, jde, kds, kde                                                         &
                         ,ims, ime, jms, jme, kms, kme                                                         &
                         ,grid%i_start(ij), grid%i_end(ij)                                                     &
                         ,grid%j_start(ij), grid%j_end(ij)                                                     &
                         ,k_start, k_end                                                                       &
                         ,max_vert_cfl_tmp(ij), max_horiz_cfl_tmp(ij)                                         )

     END DO
#ifdef LMDZ1
     WRITE(message, *)'  dyn_em: post rk_tendency' 
     CALL wrf_debug(200, message)
     WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
       ' u_tend: ', ru_tendf(im2,1,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
       'p sfc: ',p8w(im2,kms,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
     CALL wrf_debug(200, message)
#endif
     !$OMP END PARALLEL DO
BENCH_END(rk_tend_tim)

     IF (config_flags%use_adaptive_time_step) THEN
       DO ij = 1 , grid%num_tiles
         IF (max_horiz_cfl_tmp(ij) .GT. grid%max_horiz_cfl) THEN
           grid%max_horiz_cfl = max_horiz_cfl_tmp(ij)
         ENDIF
         IF (max_vert_cfl_tmp(ij) .GT. grid%max_vert_cfl) THEN
           grid%max_vert_cfl = max_vert_cfl_tmp(ij)
         ENDIF
       END DO
     
       IF (grid%max_horiz_cfl .GT. grid%max_cfl_val) THEN
         grid%max_cfl_val = grid%max_horiz_cfl
       ENDIF
       IF (grid%max_vert_cfl .GT. grid%max_cfl_val) THEN
         grid%max_cfl_val = grid%max_vert_cfl
       ENDIF
     ENDIF

BENCH_START(relax_bdy_dry_tim)
     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij )
     DO ij = 1 , grid%num_tiles

       IF( (config_flags%specified .or. config_flags%nested) .and. rk_step == 1 ) THEN 

         CALL relax_bdy_dry ( config_flags,                                &
                              grid%u_save, grid%v_save, ph_save, grid%t_save,             &
                              w_save, mu_tend,                             & 
                              grid%ru, grid%rv, grid%ph_2, grid%t_2,                           &
                              grid%w_2, grid%mu_2, grid%mut,                              &
                              grid%u_bxs,grid%u_bxe,grid%u_bys,grid%u_bye, &
                              grid%v_bxs,grid%v_bxe,grid%v_bys,grid%v_bye, &
                              grid%ph_bxs,grid%ph_bxe,grid%ph_bys,grid%ph_bye, &
                              grid%t_bxs,grid%t_bxe,grid%t_bys,grid%t_bye, &
                              grid%w_bxs,grid%w_bxe,grid%w_bys,grid%w_bye, &
                              grid%mu_bxs,grid%mu_bxe,grid%mu_bys,grid%mu_bye, &
                              grid%u_btxs,grid%u_btxe,grid%u_btys,grid%u_btye, &
                              grid%v_btxs,grid%v_btxe,grid%v_btys,grid%v_btye, &
                              grid%ph_btxs,grid%ph_btxe,grid%ph_btys,grid%ph_btye, &
                              grid%t_btxs,grid%t_btxe,grid%t_btys,grid%t_btye, &
                              grid%w_btxs,grid%w_btxe,grid%w_btys,grid%w_btye, &
                              grid%mu_btxs,grid%mu_btxe,grid%mu_btys,grid%mu_btye, &
                              config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone,       &
                              grid%dtbc, grid%fcx, grid%gcx,                              &
                              ids,ide, jds,jde, kds,kde,                   &
                              ims,ime, jms,jme, kms,kme,                   &
                              ips,ipe, jps,jpe, kps,kpe,                   &
                              grid%i_start(ij), grid%i_end(ij),            &
                              grid%j_start(ij), grid%j_end(ij),            &
                              k_start, k_end                              )

       ENDIF

       CALL rk_addtend_dry( grid%ru_tend,  grid%rv_tend,  rw_tend,  ph_tend,  t_tend,  &
                            ru_tendf, rv_tendf, rw_tendf, ph_tendf, t_tendf, &
                            grid%u_save, grid%v_save, w_save, ph_save, grid%t_save, &
                            mu_tend, mu_tendf, rk_step,                      &
                            grid%h_diabatic, grid%mut, grid%msftx,        &
                            grid%msfty, grid%msfux,grid%msfuy,               &
                            grid%msfvx, grid%msfvx_inv, grid%msfvy,          &
                            ids,ide, jds,jde, kds,kde,                       &
                            ims,ime, jms,jme, kms,kme,                       &
                            ips,ipe, jps,jpe, kps,kpe,                       &
                            grid%i_start(ij), grid%i_end(ij),                &
                            grid%j_start(ij), grid%j_end(ij),                &
                            k_start, k_end                                  )

       IF( config_flags%specified .or. config_flags%nested ) THEN 
         CALL spec_bdy_dry ( config_flags,                                    &
                             grid%ru_tend, grid%rv_tend, ph_tend, t_tend,               &
                             rw_tend, mu_tend,                                &
                             grid%u_bxs,grid%u_bxe,grid%u_bys,grid%u_bye, &
                             grid%v_bxs,grid%v_bxe,grid%v_bys,grid%v_bye, &
                             grid%ph_bxs,grid%ph_bxe,grid%ph_bys,grid%ph_bye, &
                             grid%t_bxs,grid%t_bxe,grid%t_bys,grid%t_bye, &
                             grid%w_bxs,grid%w_bxe,grid%w_bys,grid%w_bye, &
                             grid%mu_bxs,grid%mu_bxe,grid%mu_bys,grid%mu_bye, &
                             grid%u_btxs,grid%u_btxe,grid%u_btys,grid%u_btye, &
                             grid%v_btxs,grid%v_btxe,grid%v_btys,grid%v_btye, &
                             grid%ph_btxs,grid%ph_btxe,grid%ph_btys,grid%ph_btye, &
                             grid%t_btxs,grid%t_btxe,grid%t_btys,grid%t_btye, &
                             grid%w_btxs,grid%w_btxe,grid%w_btys,grid%w_btye, &
                             grid%mu_btxs,grid%mu_btxe,grid%mu_btys,grid%mu_btye, &
                             config_flags%spec_bdy_width, grid%spec_zone,                       &
                             ids,ide, jds,jde, kds,kde,  & ! domain dims
                             ims,ime, jms,jme, kms,kme,  & ! memory dims
                             ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                             grid%i_start(ij), grid%i_end(ij),                &
                             grid%j_start(ij), grid%j_end(ij),                &
                             k_start, k_end                                  )
     
       ENDIF

     END DO
     !$OMP END PARALLEL DO
BENCH_END(relax_bdy_dry_tim)

!
!
! (3) Small (acoustic,sound) steps.
!
!    Several acoustic steps are taken each RK pass.  A small step 
!    sequence begins with calculating perturbation variables 
!    and coupling them to the column dry-air-mass mu 
!    (call to small_step_prep).  This is followed by computing
!    coefficients for the vertically implicit part of the
!    small timestep (call to calc_coef_w).  
!
!    The small steps are taken
!    in the named loop "small_steps:".  In the small_steps loop, first 
!    the horizontal momentum (u and v) are advanced (call to advance_uv),
!    next mu and theta are advanced (call to advance_mu_t) followed by
!    advancing w and the geopotential (call to advance_w).  Diagnostic
!    values for pressure and inverse density are updated at the end of
!    each small_step.
!
!    The small-step section ends with the change of the perturbation variables
!    back to full variables (call to small_step_finish).
!

!

BENCH_START(small_step_prep_tim)
     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij )
     DO ij = 1 , grid%num_tiles

    ! Calculate coefficients for the vertically implicit acoustic/gravity wave
    ! integration.  We only need calculate these for the first pass through -
    ! the predictor step.  They are reused as is for the corrector step.
    ! For third-order RK, we need to recompute these after the first 
    ! predictor because we may have changed the small timestep -> grid%dts.

       CALL wrf_debug ( 200 , ' call small_step_prep ' )

#ifdef LMDZ1
       WRITE(message, *)'  dyn_em: before small_step_prep' 
       CALL wrf_debug(200, message)
       WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
         ' u_tend: ', ru_tendf(im2,1,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
         'p sfc: ',p8w(im2,kms,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
       CALL wrf_debug(200, message)
#endif
       CALL small_step_prep( grid%u_1,grid%u_2,grid%v_1,grid%v_2,grid%w_1,grid%w_2,   &
                             grid%t_1,grid%t_2,grid%ph_1,grid%ph_2,                   &
                             grid%mub, grid%mu_1, grid%mu_2,                          &
                             grid%muu, muus, grid%muv, muvs,                          &
                             grid%mut, grid%muts, grid%mudf,                          &
                             grid%u_save, grid%v_save, w_save,                        &
                             grid%t_save, ph_save, mu_save,                           &
                             grid%ww, ww1,                                            &
                             grid%dnw, c2a, grid%pb, grid%p, grid%alt,                &
                             grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv,       &
                             grid%msfvy, grid%msftx,grid%msfty,                       &
                             grid%rdx, grid%rdy, rk_step,                             &
                             ids, ide, jds, jde, kds, kde,                            &
                             ims, ime, jms, jme, kms, kme,                            &
                             grid%i_start(ij), grid%i_end(ij),                        &
                             grid%j_start(ij), grid%j_end(ij),                        &
                             k_start    , k_end                                       )
 
#ifdef LMDZ1
       WRITE(message, *)'  dyn_em: post small_step_prep' 
       CALL wrf_debug(200, message)
       WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
         ' u_tend: ', ru_tendf(im2,1,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
         'p sfc: ',p8w(im2,kms,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
       CALL wrf_debug(200, message)
#endif
       CALL calc_p_rho( grid%al, grid%p, grid%ph_2,                 &
                        grid%alt, grid%t_2, grid%t_save, c2a, pm1,  &
                        grid%mu_2, grid%muts, grid%znu, t0,         &
                        grid%rdnw, grid%dnw, grid%smdiv,            &
                        config_flags%non_hydrostatic, 0,            &
                        ids, ide, jds, jde, kds, kde,               &
                        ims, ime, jms, jme, kms, kme,               &
                        grid%i_start(ij), grid%i_end(ij),           &
                        grid%j_start(ij), grid%j_end(ij),           &
                        k_start    , k_end                          )
#ifdef LMDZ1
       WRITE(message, *)'  dyn_em: post calc_p_rho' 
       CALL wrf_debug(200, message)
       WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
         ' u_tend: ', ru_tendf(im2,1,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
         'p sfc: ',p8w(im2,kms,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
       CALL wrf_debug(200, message)
#endif

       IF (config_flags%non_hydrostatic) THEN
         CALL calc_coef_w( a,alpha,gamma,                    &
                           grid%mut, cqw,                    &
                           grid%rdn, grid%rdnw, c2a,         &
                           dts_rk, g, grid%epssm,            &
                           config_flags%top_lid,             &
                           ids, ide, jds, jde, kds, kde,     &
                           ims, ime, jms, jme, kms, kme,     &
                           grid%i_start(ij), grid%i_end(ij), &
                           grid%j_start(ij), grid%j_end(ij), &
                           k_start    , k_end               )
       ENDIF
#ifdef LMDZ1
       WRITE(message, *)'  dyn_em: post calc_coef_w' 
       CALL wrf_debug(200, message)
       WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
         ' u_tend: ', ru_tendf(im2,1,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
         'p sfc: ',p8w(im2,kms,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
         ' ph: ',grid%ph_2(im2,1,jm2)
       CALL wrf_debug(200, message)
       WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
         ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
       CALL wrf_debug(200, message)
       PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
         ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
       CALL wrf_debug(200, message)
#endif
     ENDDO
     !$OMP END PARALLEL DO
BENCH_END(small_step_prep_tim)

#ifdef DM_PARALLEL
!-----------------------------------------------------------------------
!  Stencils for patch communications  (WCS, 29 June 2001)
!  Note:  the small size of this halo exchange reflects the 
!         fact that we are carrying the uncoupled variables 
!         as state variables in the mass coordinate model, as
!         opposed to the coupled variables as in the height
!         coordinate model.
!
!                              * * * * *
!            *        * * *    * * * * *
!          * + *      * + *    * * + * * 
!            *        * * *    * * * * *
!                              * * * * *
!
!  3D variables - note staggering!  ph_2(Z), u_save(X), v_save(Y)
!
!  ph_2      x
!  al        x
!  p         x
!  t_1       x
!  t_save    x
!  u_save    x
!  v_save    x
!
!  the following are 2D (xy) variables
!
!  mu_1      x
!  mu_2      x
!  mudf      x
!  php       x
!  alt       x
!  pb        x
!--------------------------------------------------------------
#      include "HALO_EM_B.inc"
#      include "PERIOD_BDY_EM_B.inc"
#endif

BENCH_START(set_phys_bc2_tim)
     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij )

     DO ij = 1 , grid%num_tiles

       CALL set_physical_bc3d( grid%ru_tend, 'u', config_flags,      &
                               ids, ide, jds, jde, kds, kde,         &
                               ims, ime, jms, jme, kms, kme,         &
                               ips, ipe, jps, jpe, kps, kpe,         &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij),     &
                               k_start    , k_end                    )

       CALL set_physical_bc3d( grid%rv_tend, 'v', config_flags,      &
                               ids, ide, jds, jde, kds, kde,         &
                               ims, ime, jms, jme, kms, kme,         &
                               ips, ipe, jps, jpe, kps, kpe,         &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij),     &
                               k_start    , k_end                    )

       CALL set_physical_bc3d( grid%ph_2, 'w', config_flags,         &
                               ids, ide, jds, jde, kds, kde,         &
                               ims, ime, jms, jme, kms, kme,         &
                               ips, ipe, jps, jpe, kps, kpe,         &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij),     &
                               k_start    , k_end                    )

       CALL set_physical_bc3d( grid%al, 'p', config_flags,           &
                               ids, ide, jds, jde, kds, kde,         &
                               ims, ime, jms, jme, kms, kme,         &
                               ips, ipe, jps, jpe, kps, kpe,         &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij),     &
                               k_start    , k_end                    )

       CALL set_physical_bc3d( grid%p, 'p', config_flags,            &
                               ids, ide, jds, jde, kds, kde,         &
                               ims, ime, jms, jme, kms, kme,         &
                               ips, ipe, jps, jpe, kps, kpe,         &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij),     &
                               k_start    , k_end                    )

       CALL set_physical_bc3d( grid%t_1, 'p', config_flags,          &
                               ids, ide, jds, jde, kds, kde,         &
                               ims, ime, jms, jme, kms, kme,         &
                               ips, ipe, jps, jpe, kps, kpe,         &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij),     &
                               k_start    , k_end                    )

       CALL set_physical_bc3d( grid%t_save, 't', config_flags,       &
                               ids, ide, jds, jde, kds, kde,         &
                               ims, ime, jms, jme, kms, kme,         &
                               ips, ipe, jps, jpe, kps, kpe,         &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij),     &
                               k_start    , k_end                    )

       CALL set_physical_bc2d( grid%mu_1, 't', config_flags,         &
                               ids, ide, jds, jde,                   &
                               ims, ime, jms, jme,                   &
                               ips, ipe, jps, jpe,                   &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij)      )

       CALL set_physical_bc2d( grid%mu_2, 't', config_flags,         &
                               ids, ide, jds, jde,                   &
                               ims, ime, jms, jme,                   &
                               ips, ipe, jps, jpe,                   &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij)      )

       CALL set_physical_bc2d( grid%mudf, 't', config_flags,         &
                               ids, ide, jds, jde,                   &
                               ims, ime, jms, jme,                   &
                               ips, ipe, jps, jpe,                   &
                               grid%i_start(ij), grid%i_end(ij),     &
                               grid%j_start(ij), grid%j_end(ij)      )

     END DO
     !$OMP END PARALLEL DO
BENCH_END(set_phys_bc2_tim)
     small_steps : DO iteration = 1 , number_of_small_timesteps

       ! Boundary condition time (or communication time).  
#ifdef DM_PARALLEL
#      include "PERIOD_BDY_EM_B.inc"
#endif

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )

       DO ij = 1 , grid%num_tiles

BENCH_START(advance_uv_tim)
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: before advance_uv' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
           ' ph: ',grid%ph_2(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
           ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
         CALL wrf_debug(200, message)
         PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
           ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
         CALL wrf_debug(200, message)
#endif

         CALL advance_uv ( grid%u_2, grid%ru_tend, grid%v_2, grid%rv_tend,        &
                           grid%p, grid%pb,                                       &
                           grid%ph_2, grid%php, grid%alt,  grid%al,               &
                           grid%mu_2,                                             &
                           grid%muu, cqu, grid%muv, cqv, grid%mudf,               &
                           grid%msfux, grid%msfuy, grid%msfvx,                    &
                           grid%msfvx_inv, grid%msfvy,                            &
                           grid%rdx, grid%rdy, dts_rk,                            &
                           grid%cf1, grid%cf2, grid%cf3, grid%fnm, grid%fnp,      &
                           grid%emdiv,                                            &
                           grid%rdnw, config_flags,grid%spec_zone,                &
                           config_flags%non_hydrostatic, config_flags%top_lid,    &
                           ids, ide, jds, jde, kds, kde,                          &
                           ims, ime, jms, jme, kms, kme,                          &
                           grid%i_start(ij), grid%i_end(ij),                      &
                           grid%j_start(ij), grid%j_end(ij),                      &
                           k_start    , k_end                                     )
BENCH_END(advance_uv_tim)

       END DO
       !$OMP END PARALLEL DO
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after advance_uv' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
           ' ph: ',grid%ph_2(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
           ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
         CALL wrf_debug(200, message)
         PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
           ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
         CALL wrf_debug(200, message)
#endif

!-----------------------------------------------------------
!  acoustic integration polar filter for smallstep u, v
!-----------------------------------------------------------

       IF (config_flags%polar) THEN

         CALL pxft ( grid=grid                                              &
               ,lineno=__LINE__                                             &
               ,flag_uv            = 1                                      &
               ,flag_rurv          = 0                                      &
               ,flag_wph           = 0                                      &
               ,flag_ww            = 0                                      &
               ,flag_t             = 0                                      &
               ,flag_mu            = 0                                      &
               ,flag_mut           = 0                                      &
               ,flag_moist         = 0                                      &
               ,flag_chem          = 0                                      &
               ,flag_tracer        = 0                                      &
               ,flag_scalar        = 0                                      &
               ,positive_definite  = .FALSE.                                &
               ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
               ,fft_filter_lat = config_flags%fft_filter_lat                &
               ,dclat = dclat                                               &
               ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
               ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
               ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
               ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
               ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )

       END IF

!-----------------------------------------------------------
!  end acoustic integration polar filter for smallstep u, v
!-----------------------------------------------------------

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles

BENCH_START(spec_bdy_uv_tim)
         IF( config_flags%specified .or. config_flags%nested ) THEN
           CALL spec_bdyupdate(grid%u_2, grid%ru_tend, dts_rk,      &
                               'u'         , config_flags, &
                                grid%spec_zone,                  &
                                ids,ide, jds,jde, kds,kde,  & ! domain dims
                                ims,ime, jms,jme, kms,kme,  & ! memory dims
                                ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                grid%i_start(ij), grid%i_end(ij),         &
                                grid%j_start(ij), grid%j_end(ij),         &
                                k_start    , k_end             )

           CALL spec_bdyupdate(grid%v_2, grid%rv_tend, dts_rk,      &
                                'v'         , config_flags, &
                                grid%spec_zone,                  &
                                ids,ide, jds,jde, kds,kde,  & ! domain dims
                                ims,ime, jms,jme, kms,kme,  & ! memory dims
                                ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                grid%i_start(ij), grid%i_end(ij),         &
                                grid%j_start(ij), grid%j_end(ij),         &
                                k_start    , k_end             )

         ENDIF
BENCH_END(spec_bdy_uv_tim)

       END DO
       !$OMP END PARALLEL DO

#ifdef DM_PARALLEL
!
!  Stencils for patch communications  (WCS, 29 June 2001)
!
!         *                     *
!       * + *      * + *        +
!         *                     *
!
!  u_2               x
!  v_2                          x
!
#     include "HALO_EM_C.inc"
#endif

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles

        !  advance the mass in the column, theta, and calculate ww

BENCH_START(advance_mu_t_tim)
         CALL advance_mu_t( grid%ww, ww1, grid%u_2, grid%u_save, grid%v_2, grid%v_save, &
                          grid%mu_2, grid%mut, muave, grid%muts, grid%muu, grid%muv,    &
                          grid%mudf, grid%ru_m, grid%rv_m, grid%ww_m,                   &
                          grid%t_2, grid%t_save, t_2save, t_tend,                       &
                          mu_tend,                                                      &
                          grid%rdx, grid%rdy, dts_rk, grid%epssm,                       &
                          grid%dnw, grid%fnm, grid%fnp, grid%rdnw,                      &
                          grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv,            &
                          grid%msfvy, grid%msftx,grid%msfty,                            &
                          iteration, config_flags,                                      &
                          ids, ide, jds, jde, kds, kde,      &
                          ims, ime, jms, jme, kms, kme,      &
                          grid%i_start(ij), grid%i_end(ij),  &
                          grid%j_start(ij), grid%j_end(ij),  &
                          k_start    , k_end                )
BENCH_END(advance_mu_t_tim)
       ENDDO
       !$OMP END PARALLEL DO
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after advance_mut' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
           ' ph: ',grid%ph_2(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
           ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
         CALL wrf_debug(200, message)
         PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
           ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
         CALL wrf_debug(200, message)
#endif

!-----------------------------------------------------------
!  acoustic integration polar filter for smallstep mu, t
!-----------------------------------------------------------

       IF ( (config_flags%polar) ) THEN

         CALL pxft ( grid=grid                                               &
                ,lineno=__LINE__                                             &
                ,flag_uv            = 0                                      &
                ,flag_rurv          = 0                                      &
                ,flag_wph           = 0                                      &
                ,flag_ww            = 0                                      &
                ,flag_t             = 1                                      &
                ,flag_mu            = 1                                      &
                ,flag_mut           = 0                                      &
                ,flag_moist         = 0                                      &
                ,flag_chem          = 0                                      &
                ,flag_tracer        = 0                                      &
                ,flag_scalar        = 0                                      &
                ,positive_definite  = .FALSE.                                &
                ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                ,fft_filter_lat = config_flags%fft_filter_lat                &
                ,dclat = dclat                                               &
                ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )

         grid%muts = grid%mut + grid%mu_2  ! reset muts using filtered mu_2
 
       END IF

!-----------------------------------------------------------
!  end acoustic integration polar filter for smallstep mu, t
!-----------------------------------------------------------

BENCH_START(spec_bdy_t_tim)

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles

         IF( config_flags%specified .or. config_flags%nested ) THEN

           CALL spec_bdyupdate(grid%t_2, t_tend, dts_rk,        &
                               't'         , config_flags,      &
                               grid%spec_zone,                  &
                               ids,ide, jds,jde, kds,kde,       &
                               ims,ime, jms,jme, kms,kme,       &
                               ips,ipe, jps,jpe, kps,kpe,       &
                               grid%i_start(ij), grid%i_end(ij),&
                               grid%j_start(ij), grid%j_end(ij),&
                               k_start    , k_end              )

           CALL spec_bdyupdate(grid%mu_2, mu_tend, dts_rk,       &
                               'm'         , config_flags,      &
                               grid%spec_zone,                  &
                               ids,ide, jds,jde, 1  ,1  ,       &
                               ims,ime, jms,jme, 1  ,1  ,       &
                               ips,ipe, jps,jpe, 1  ,1  ,       &
                               grid%i_start(ij), grid%i_end(ij),&
                               grid%j_start(ij), grid%j_end(ij),&
                               1    , 1             )

           CALL spec_bdyupdate(grid%muts, mu_tend, dts_rk,      &
                              'm'         , config_flags, &
                              grid%spec_zone,                  &
                              ids,ide, jds,jde, 1  ,1  ,  & ! domain dims
                              ims,ime, jms,jme, 1  ,1  ,  & ! memory dims
                              ips,ipe, jps,jpe, 1  ,1  ,  & ! patch  dims
                              grid%i_start(ij), grid%i_end(ij),         &
                              grid%j_start(ij), grid%j_end(ij),         &
                              1    , 1             )
         ENDIF
BENCH_END(spec_bdy_t_tim)

         ! small (acoustic) step for the vertical momentum,
         ! density and coupled potential temperature.


BENCH_START(advance_w_tim)
         IF ( config_flags%non_hydrostatic ) THEN
           CALL advance_w( grid%w_2, rw_tend, grid%ww, w_save,         &
                           grid%u_2, grid%v_2,                         &
                           grid%mu_2, grid%mut, muave, grid%muts,      &
                           t_2save, grid%t_2, grid%t_save,             &
                           grid%ph_2, ph_save, grid%phb, ph_tend,      &
                           grid%ht, c2a, cqw, grid%alt, grid%alb,      &
                           a, alpha, gamma,                            &
                           grid%rdx, grid%rdy, dts_rk, t0, grid%epssm, &
                           grid%dnw, grid%fnm, grid%fnp, grid%rdnw,    &
                           grid%rdn, grid%cf1, grid%cf2, grid%cf3,     &
                           grid%msftx, grid%msfty,                     &
                           config_flags,  config_flags%top_lid,        &
                           ids,ide, jds,jde, kds,kde,                  &
                           ims,ime, jms,jme, kms,kme,                  &
                           grid%i_start(ij), grid%i_end(ij),           &
                           grid%j_start(ij), grid%j_end(ij),           &
                           k_start    , k_end                          )
         ENDIF
BENCH_END(advance_w_tim)

       ENDDO
       !$OMP END PARALLEL DO
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after advance_w' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
           ' ph: ',grid%ph_2(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
           ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
         CALL wrf_debug(200, message)
         PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
           ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
         CALL wrf_debug(200, message)
#endif

!-----------------------------------------------------------
!  acoustic integration polar filter for smallstep w, geopotential
!-----------------------------------------------------------

       IF ( (config_flags%polar) .AND. (config_flags%non_hydrostatic) ) THEN

         CALL pxft ( grid=grid                                               &
                ,lineno=__LINE__                                             &
                ,flag_uv            = 0                                      &
                ,flag_rurv          = 0                                      &
                ,flag_wph           = 1                                      &
                ,flag_ww            = 0                                      &
                ,flag_t             = 0                                      &
                ,flag_mu            = 0                                      &
                ,flag_mut           = 0                                      &
                ,flag_moist         = 0                                      &
                ,flag_chem          = 0                                      &
                ,flag_tracer        = 0                                      &
                ,flag_scalar        = 0                                      &
                ,positive_definite  = .FALSE.                                &
                ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                ,fft_filter_lat = config_flags%fft_filter_lat                &
                ,dclat = dclat                                               &
                ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )

       END IF

!-----------------------------------------------------------
!  end acoustic integration polar filter for smallstep w, geopotential
!-----------------------------------------------------------

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles

BENCH_START(sumflux_tim)
         CALL sumflux ( grid%u_2, grid%v_2, grid%ww,          &
                        grid%u_save, grid%v_save, ww1,        &
                        grid%muu, grid%muv,                   &
                        grid%ru_m, grid%rv_m, grid%ww_m, grid%epssm,  &
                        grid%msfux, grid% msfuy, grid%msfvx,  &
                        grid%msfvx_inv, grid%msfvy,           &
                        iteration, number_of_small_timesteps, &
                        ids, ide, jds, jde, kds, kde,         &
                        ims, ime, jms, jme, kms, kme,         &
                        grid%i_start(ij), grid%i_end(ij),     &
                        grid%j_start(ij), grid%j_end(ij),     &
                        k_start    , k_end                   )
BENCH_END(sumflux_tim)
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after sumflux' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
           ' ph: ',grid%ph_2(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
           ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
         CALL wrf_debug(200, message)
         PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
           ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
         CALL wrf_debug(200, message)
#endif

         IF( config_flags%specified .or. config_flags%nested ) THEN

BENCH_START(spec_bdynhyd_tim)
           IF (config_flags%non_hydrostatic)  THEN
             CALL spec_bdyupdate_ph( ph_save, grid%ph_2, ph_tend,     &
                                     mu_tend, grid%muts, dts_rk,      &
                                     'h'         , config_flags,      &
                                     grid%spec_zone,                  &
                                     ids,ide, jds,jde, kds,kde,       &
                                     ims,ime, jms,jme, kms,kme,       &
                                     ips,ipe, jps,jpe, kps,kpe,       &
                                     grid%i_start(ij), grid%i_end(ij),&
                                     grid%j_start(ij), grid%j_end(ij),&
                                     k_start    , k_end               )
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after spec_bdynhyd_ph' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
           ' ph: ',grid%ph_2(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
           ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
         CALL wrf_debug(200, message)
         PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
           ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
         CALL wrf_debug(200, message)
#endif
             IF( config_flags%specified ) THEN
               CALL zero_grad_bdy ( grid%w_2,                         &
                                    'w'         , config_flags,       &
                                    grid%spec_zone,                   &
                                    ids,ide, jds,jde, kds,kde,        &
                                    ims,ime, jms,jme, kms,kme,        &
                                    ips,ipe, jps,jpe, kps,kpe,        &
                                    grid%i_start(ij), grid%i_end(ij), &
                                    grid%j_start(ij), grid%j_end(ij), &
                                    k_start    , k_end                )
             ELSE
               CALL spec_bdyupdate ( grid%w_2, rw_tend, dts_rk,       &
                                     'h'         , config_flags,      &
                                     grid%spec_zone,                  &
                                     ids,ide, jds,jde, kds,kde,       &
                                     ims,ime, jms,jme, kms,kme,       &
                                     ips,ipe, jps,jpe, kps,kpe,       &
                                     grid%i_start(ij), grid%i_end(ij),&
                                     grid%j_start(ij), grid%j_end(ij),&
                                     k_start    , k_end               )
             ENDIF
           ENDIF
BENCH_END(spec_bdynhyd_tim)
         ENDIF
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after spec_bdynhyd_tim' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   al: ',grid%al(im2,km2,jm2), ' p: ', grid%p(im2,1,jm2),     &
           ' ph: ',grid%ph_2(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)'   mu: ',grid%mu_2(im2,jm2), 'alt: ', grid%alt(im2,1,jm2), &
           ' mu: ',grid%mu_2(im2,jm2), ' znu: ', grid%znu(1),' ph 1: ',grid%ph_2(im2,2,jm2)
         CALL wrf_debug(200, message)
         PRINT  *,'   c2a: ',c2a(im2,1,jm2), 't_2: ', grid%t_2(im2,1,jm2),           &
           ' t_save: ',grid%t_save(im2,1,jm2),' pm1: ',pm1(im2,1,jm2)
         CALL wrf_debug(200, message)
#endif

BENCH_START(cald_p_rho_tim)
         CALL calc_p_rho( grid%al, grid%p, grid%ph_2,                 &
                          grid%alt, grid%t_2, grid%t_save, c2a, pm1,  &
                          grid%mu_2, grid%muts, grid%znu, t0,         &
                          grid%rdnw, grid%dnw, grid%smdiv,            &
                          config_flags%non_hydrostatic, iteration,    &
                          ids, ide, jds, jde, kds, kde,     &
                          ims, ime, jms, jme, kms, kme,     &
                          grid%i_start(ij), grid%i_end(ij), &
                          grid%j_start(ij), grid%j_end(ij), &
                          k_start    , k_end               )
BENCH_END(cald_p_rho_tim)
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after calc_p_rho' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
#endif

       ENDDO
       !$OMP END PARALLEL DO
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after geopotential' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
#endif

#ifdef DM_PARALLEL
!
!  Stencils for patch communications  (WCS, 29 June 2001)
!
!         *                     *
!       * + *      * + *        +
!         *                     *
!
!  ph_2   x
!  al     x
!  p      x
!
!  2D variables (x,y)
!
!  mu_2   x
!  muts   x
!  mudf   x

#      include "HALO_EM_C2.inc"
#      include "PERIOD_BDY_EM_B3.inc"
#endif

BENCH_START(phys_bc_tim)
       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles

       ! boundary condition set for next small timestep

         CALL set_physical_bc3d( grid%ph_2, 'w', config_flags,          &
                                 ids, ide, jds, jde, kds, kde,     &
                                 ims, ime, jms, jme, kms, kme,     &
                                 ips, ipe, jps, jpe, kps, kpe,     &
                                 grid%i_start(ij), grid%i_end(ij), &
                                 grid%j_start(ij), grid%j_end(ij), &
                                 k_start    , k_end               )

         CALL set_physical_bc3d( grid%al, 'p', config_flags,            &
                                 ids, ide, jds, jde, kds, kde,     &
                                 ims, ime, jms, jme, kms, kme,     &
                                 ips, ipe, jps, jpe, kps, kpe,     &
                                 grid%i_start(ij), grid%i_end(ij), &
                                 grid%j_start(ij), grid%j_end(ij), &
                                 k_start    , k_end               )

         CALL set_physical_bc3d( grid%p, 'p', config_flags,             &
                                 ids, ide, jds, jde, kds, kde,     &
                                 ims, ime, jms, jme, kms, kme,     &
                                 ips, ipe, jps, jpe, kps, kpe,     &
                                 grid%i_start(ij), grid%i_end(ij), &
                                 grid%j_start(ij), grid%j_end(ij), &
                                 k_start    , k_end               )

         CALL set_physical_bc2d( grid%muts, 't', config_flags,          &
                                 ids, ide, jds, jde,               &
                                 ims, ime, jms, jme,               &
                                 ips, ipe, jps, jpe,               &
                                 grid%i_start(ij), grid%i_end(ij), &
                                 grid%j_start(ij), grid%j_end(ij) )

         CALL set_physical_bc2d( grid%mu_2, 't', config_flags,          &
                                 ids, ide, jds, jde,               &
                                 ims, ime, jms, jme,               &
                                 ips, ipe, jps, jpe,               &
                                 grid%i_start(ij), grid%i_end(ij), &
                                 grid%j_start(ij), grid%j_end(ij) )

         CALL set_physical_bc2d( grid%mudf, 't', config_flags,          &
                                 ids, ide, jds, jde,               &
                                 ims, ime, jms, jme,               &
                                 ips, ipe, jps, jpe,               &
                                 grid%i_start(ij), grid%i_end(ij), &
                                 grid%j_start(ij), grid%j_end(ij) )

       END DO
       !$OMP END PARALLEL DO
BENCH_END(phys_bc_tim)

     END DO small_steps

     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij )
     DO ij = 1 , grid%num_tiles

       CALL wrf_debug ( 200 , ' call rk_small_finish' )

      ! change time-perturbation variables back to 
      ! full perturbation variables.
      ! first get updated mu at u and v points

BENCH_START(calc_mu_uv_tim)
       CALL calc_mu_uv_1 ( config_flags,                     &
                           grid%muts, muus, muvs,                 &
                           ids, ide, jds, jde, kds, kde,     &
                           ims, ime, jms, jme, kms, kme,     &
                           grid%i_start(ij), grid%i_end(ij), &
                           grid%j_start(ij), grid%j_end(ij), &
                           k_start    , k_end               )
BENCH_END(calc_mu_uv_tim)
BENCH_START(small_step_finish_tim)
       CALL small_step_finish( grid%u_2, grid%u_1, grid%v_2, grid%v_1, grid%w_2, grid%w_1,     &
                               grid%t_2, grid%t_1, grid%ph_2, grid%ph_1, grid%ww, ww1,    &
                               grid%mu_2, grid%mu_1,                       &
                               grid%mut, grid%muts, grid%muu, muus, grid%muv, muvs,  & 
                               grid%u_save, grid%v_save, w_save,           &
                               grid%t_save, ph_save, mu_save,         &
                               grid%msfux,grid%msfuy, grid%msfvx,grid%msfvy, grid%msftx,grid%msfty, &
                               grid%h_diabatic,                       &
                               number_of_small_timesteps,dts_rk, &
                               rk_step, rk_order,                &
                               ids, ide, jds, jde, kds, kde,     &
                               ims, ime, jms, jme, kms, kme,     &
                               grid%i_start(ij), grid%i_end(ij), &
                               grid%j_start(ij), grid%j_end(ij), &
                               k_start    , k_end               )
!  call  to set ru_m, rv_m and ww_m b.c's for PD advection

       IF (rk_step == rk_order) THEN

         CALL set_physical_bc3d( grid%ru_m, 'u', config_flags,   &
                                 ids, ide, jds, jde, kds, kde,      &
                                 ims, ime, jms, jme, kms, kme,      &
                                 ips, ipe, jps, jpe, kps, kpe,      &
                                 grid%i_start(ij), grid%i_end(ij),  &
                                 grid%j_start(ij), grid%j_end(ij),  &
                                 k_start    , k_end                )

         CALL set_physical_bc3d( grid%rv_m, 'v', config_flags,   &
                                 ids, ide, jds, jde, kds, kde,      &
                                 ims, ime, jms, jme, kms, kme,      &
                                 ips, ipe, jps, jpe, kps, kpe,      &
                                 grid%i_start(ij), grid%i_end(ij),  &
                                 grid%j_start(ij), grid%j_end(ij),  &
                                 k_start    , k_end                )

         CALL set_physical_bc3d( grid%ww_m, 'w', config_flags,   &
                                 ids, ide, jds, jde, kds, kde,      &
                                 ims, ime, jms, jme, kms, kme,      &
                                 ips, ipe, jps, jpe, kps, kpe,      &
                                 grid%i_start(ij), grid%i_end(ij),  &
                                 grid%j_start(ij), grid%j_end(ij),  &
                                 k_start    , k_end                )

         CALL set_physical_bc2d( grid%mut, 't', config_flags,   &
                                 ids, ide, jds, jde,               &
                                 ims, ime, jms, jme,                &
                                 ips, ipe, jps, jpe,                &
                                 grid%i_start(ij), grid%i_end(ij),  &
                                 grid%j_start(ij), grid%j_end(ij) )

         CALL set_physical_bc2d( grid%muts, 't', config_flags,   &
                                 ids, ide, jds, jde,               &
                                 ims, ime, jms, jme,                &
                                 ips, ipe, jps, jpe,                &
                                 grid%i_start(ij), grid%i_end(ij),  &
                                 grid%j_start(ij), grid%j_end(ij) )
 
       END IF

BENCH_END(small_step_finish_tim)

     END DO
     !$OMP END PARALLEL DO
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after rk_small_finish' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
#endif

!-----------------------------------------------------------
!  polar filter for full dynamics variables and time-averaged mass fluxes 
!-----------------------------------------------------------

     IF (config_flags%polar) THEN

       CALL pxft ( grid=grid                                                   &
                  ,lineno=__LINE__                                             &
                  ,flag_uv            = 1                                      &
                  ,flag_rurv          = 1                                      &
                  ,flag_wph           = 1                                      &
                  ,flag_ww            = 1                                      &
                  ,flag_t             = 1                                      &
                  ,flag_mu            = 1                                      &
                  ,flag_mut           = 1                                      &
                  ,flag_moist         = 0                                      &
                  ,flag_chem          = 0                                      &
                  ,flag_tracer        = 0                                      &
                  ,flag_scalar        = 0                                      &
                  ,positive_definite  = .FALSE.                                &
                  ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                  ,fft_filter_lat = config_flags%fft_filter_lat                &
                  ,dclat = dclat                                               &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                  ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                  ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )

     END IF

!-----------------------------------------------------------
!  end polar filter for full dynamics variables and time-averaged mass fluxes 
!-----------------------------------------------------------

!-----------------------------------------------------------------------
!  add in physics tendency first if positive definite advection is used.
!  pd advection applies advective flux limiter on last runge-kutta step
!-----------------------------------------------------------------------
! first moisture

     IF ((config_flags%moist_adv_opt /= ORIGINAL) .and. (rk_step == rk_order)) THEN

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles
         CALL wrf_debug ( 200 , ' call rk_update_scalar_pd' )
         DO im = PARAM_FIRST_SCALAR, num_3d_m
           CALL rk_update_scalar_pd( im, im,                                   &
                                     moist_old(ims,kms,jms,im),                &
                                     moist_tend(ims,kms,jms,im),               &
                                     grid%mu_1, grid%mu_1, grid%mub,  &
                                     rk_step, dt_rk, grid%spec_zone,           &
                                     config_flags,                             &
                                     ids, ide, jds, jde, kds, kde,             &
                                     ims, ime, jms, jme, kms, kme,             &
                                     grid%i_start(ij), grid%i_end(ij),         &
                                     grid%j_start(ij), grid%j_end(ij),         &
                                     k_start    , k_end                       )
         ENDDO
       END DO
       !$OMP END PARALLEL DO

!---------------------- positive definite bc call
#ifdef DM_PARALLEL
       IF (config_flags%moist_adv_opt /= ORIGINAL) THEN
         IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
#     include "HALO_EM_MOIST_OLD_E_5.inc"
         ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
#     include "HALO_EM_MOIST_OLD_E_7.inc"
         ELSE
           WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
           CALL wrf_error_fatal(TRIM(wrf_err_message))
         ENDIF
       ENDIF
#endif

#ifdef DM_PARALLEL
#  include "PERIOD_BDY_EM_MOIST_OLD.inc"
#endif

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles
         IF (num_3d_m >= PARAM_FIRST_SCALAR) THEN
           DO im = PARAM_FIRST_SCALAR , num_3d_m
             CALL set_physical_bc3d( moist_old(ims,kms,jms,im), 'p', config_flags,   &
                                     ids, ide, jds, jde, kds, kde,                  &
                                     ims, ime, jms, jme, kms, kme,                  &
                                     ips, ipe, jps, jpe, kps, kpe,                  &
                                     grid%i_start(ij), grid%i_end(ij),              &
                                     grid%j_start(ij), grid%j_end(ij),              &
                                     k_start    , k_end                            )
           END DO
         ENDIF
       END DO
       !$OMP END PARALLEL DO

     END IF  ! end if for moist_adv_opt

! scalars

     IF ((config_flags%scalar_adv_opt /= ORIGINAL) .and. (rk_step == rk_order)) THEN

       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       DO ij = 1 , grid%num_tiles
         CALL wrf_debug ( 200 , ' call rk_update_scalar_pd' )
         DO im = PARAM_FIRST_SCALAR, num_3d_s
           CALL rk_update_scalar_pd( im, im,                                  &
                                     scalar_old(ims,kms,jms,im),              &
                                     scalar_tend(ims,kms,jms,im),             &
                                     grid%mu_1, grid%mu_1, grid%mub, &
                                     rk_step, dt_rk, grid%spec_zone,          &
                                     config_flags,                            &
                                     ids, ide, jds, jde, kds, kde,            &
                                     ims, ime, jms, jme, kms, kme,            &
                                     grid%i_start(ij), grid%i_end(ij),        &
                                     grid%j_start(ij), grid%j_end(ij),        &
                                     k_start    , k_end                      )
         ENDDO
       ENDDO
       !$OMP END PARALLEL DO

!---------------------- positive definite bc call
#ifdef DM_PARALLEL
       IF (config_flags%scalar_adv_opt /= ORIGINAL) THEN
#ifndef RSL
         IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
#     include "HALO_EM_SCALAR_OLD_E_5.inc"
         ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
#     include "HALO_EM_SCALAR_OLD_E_7.inc"
         ELSE
           WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
           CALL wrf_error_fatal(TRIM(wrf_err_message))
         ENDIF
#else
         WRITE(wrf_err_message,*)'cannot use pd scheme with RSL - use RSL-LITE'
         CALL wrf_error_fatal(TRIM(wrf_err_message))
#endif   
  endif
#endif

#ifdef DM_PARALLEL
#  include "PERIOD_BDY_EM_SCALAR_OLD.inc"
#endif
         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )

         DO ij = 1 , grid%num_tiles
           IF (num_3d_s >= PARAM_FIRST_SCALAR) THEN
             DO im = PARAM_FIRST_SCALAR , num_3d_s
               CALL set_physical_bc3d(  scalar_old(ims,kms,jms,im), 'p', config_flags, &
                                        ids, ide, jds, jde, kds, kde,                    &
                                        ims, ime, jms, jme, kms, kme,                    &
                                        ips, ipe, jps, jpe, kps, kpe,                    &
                                        grid%i_start(ij), grid%i_end(ij),                &
                                        grid%j_start(ij), grid%j_end(ij),                &
                                        k_start    , k_end                              )
             END DO
           ENDIF
         END DO
         !$OMP END PARALLEL DO

       END IF  ! end if for scalar_adv_opt

! chem

       IF ((config_flags%chem_adv_opt /= ORIGINAL) .and. (rk_step == rk_order)) THEN

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         DO ij = 1 , grid%num_tiles
           CALL wrf_debug ( 200 , ' call rk_update_scalar_pd' )
           DO im = PARAM_FIRST_SCALAR, num_3d_c
             CALL rk_update_scalar_pd( im, im,                                  &
                                       chem_old(ims,kms,jms,im),                &
                                       chem_tend(ims,kms,jms,im),               &
                                       grid%mu_1, grid%mu_1, grid%mub, &
                                       rk_step, dt_rk, grid%spec_zone,          &
                                       config_flags,                            &
                                       ids, ide, jds, jde, kds, kde,            &
                                       ims, ime, jms, jme, kms, kme,            &
                                       grid%i_start(ij), grid%i_end(ij),        &
                                       grid%j_start(ij), grid%j_end(ij),        &
                                       k_start    , k_end                      )
           ENDDO
         END DO
         !$OMP END PARALLEL DO

!---------------------- positive definite bc call
#ifdef DM_PARALLEL
         IF (config_flags%chem_adv_opt /= ORIGINAL) THEN
           IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
#     include "HALO_EM_CHEM_OLD_E_5.inc"
           ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
#     include "HALO_EM_CHEM_OLD_E_7.inc"
           ELSE
             WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
             CALL wrf_error_fatal(TRIM(wrf_err_message))
           ENDIF
         ENDIF
#endif

#ifdef DM_PARALLEL
#  include "PERIOD_BDY_EM_CHEM_OLD.inc"
#endif

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         DO ij = 1 , grid%num_tiles
           IF (num_3d_c >= PARAM_FIRST_SCALAR) THEN
             DO im = PARAM_FIRST_SCALAR , num_3d_c
               CALL set_physical_bc3d(  chem_old(ims,kms,jms,im), 'p', config_flags,     &
                                        ids, ide, jds, jde, kds, kde,                    &
                                        ims, ime, jms, jme, kms, kme,                    &
                                        ips, ipe, jps, jpe, kps, kpe,                    &
                                        grid%i_start(ij), grid%i_end(ij),                &
                                        grid%j_start(ij), grid%j_end(ij),                &
                                        k_start    , k_end                              )
             END DO 
           ENDIF
         END DO
         !$OMP END PARALLEL DO

       ENDIF  ! end if for chem_adv_opt

! tracer

       IF ((config_flags%tracer_adv_opt /= ORIGINAL) .and. (rk_step == rk_order)) THEN

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         DO ij = 1 , grid%num_tiles
           CALL wrf_debug ( 200 , ' call rk_update_scalar_pd' )
           DO im = PARAM_FIRST_SCALAR, num_tracer
             CALL rk_update_scalar_pd( im, im,                                  &
                                       tracer_old(ims,kms,jms,im),                &
                                       tracer_tend(ims,kms,jms,im),               &
                                       grid%mu_1, grid%mu_1, grid%mub, &
                                       rk_step, dt_rk, grid%spec_zone,          &
                                       config_flags,                            &
                                       ids, ide, jds, jde, kds, kde,            &
                                       ims, ime, jms, jme, kms, kme,            &
                                       grid%i_start(ij), grid%i_end(ij),        &
                                       grid%j_start(ij), grid%j_end(ij),        &
                                       k_start    , k_end                      )
           ENDDO
         END DO
         !$OMP END PARALLEL DO

!---------------------- positive definite bc call
#ifdef DM_PARALLEL
         IF (config_flags%tracer_adv_opt /= ORIGINAL) THEN
           IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
#     include "HALO_EM_TRACER_OLD_E_5.inc"
           ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
#     include "HALO_EM_TRACER_OLD_E_7.inc"
           ELSE
             WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
             CALL wrf_error_fatal(TRIM(wrf_err_message))
           ENDIF
         ENDIF
#endif

#ifdef DM_PARALLEL
#  include "PERIOD_BDY_EM_TRACER_OLD.inc"
#endif

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         DO ij = 1 , grid%num_tiles
           IF (num_tracer >= PARAM_FIRST_SCALAR) THEN
             DO im = PARAM_FIRST_SCALAR , num_tracer
               CALL set_physical_bc3d(  tracer_old(ims,kms,jms,im), 'p', config_flags,   &
                                        ids, ide, jds, jde, kds, kde,                    &
                                        ims, ime, jms, jme, kms, kme,                    &
                                        ips, ipe, jps, jpe, kps, kpe,                    &
                                        grid%i_start(ij), grid%i_end(ij),                &
                                        grid%j_start(ij), grid%j_end(ij),                &
                                        k_start    , k_end                              )
             END DO 
           ENDIF
         END DO
         !$OMP END PARALLEL DO

       ENDIF  ! end if for tracer_adv_opt

! tke

       IF ((config_flags%tke_adv_opt /= ORIGINAL) .and. (rk_step == rk_order) &
           .and. (config_flags%km_opt .eq. 2)                ) THEN

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         DO ij = 1 , grid%num_tiles
           CALL wrf_debug ( 200 , ' call rk_update_scalar_pd' )
           CALL rk_update_scalar_pd( 1, 1,                                    &
                                     grid%tke_1,                              &
                                     tke_tend(ims,kms,jms),                   &
                                     grid%mu_1, grid%mu_1, grid%mub,          &
                                     rk_step, dt_rk, grid%spec_zone,          &
                                     config_flags,                            &
                                     ids, ide, jds, jde, kds, kde,            &
                                     ims, ime, jms, jme, kms, kme,            &
                                     grid%i_start(ij), grid%i_end(ij),        &
                                     grid%j_start(ij), grid%j_end(ij),        &
                                     k_start    , k_end                       )
         ENDDO
         !$OMP END PARALLEL DO

!---------------------- positive definite bc call
#ifdef DM_PARALLEL
         IF (config_flags%tke_adv_opt /= ORIGINAL) THEN
           IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
#     include "HALO_EM_TKE_OLD_E_5.inc"
           ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
#     include "HALO_EM_TKE_OLD_E_7.inc"
           ELSE
             WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
             CALL wrf_error_fatal(TRIM(wrf_err_message))
           ENDIF
         ENDIF
#endif

#ifdef DM_PARALLEL
#  include "PERIOD_BDY_EM_TKE_OLD.inc"
#endif

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         DO ij = 1 , grid%num_tiles
           CALL set_physical_bc3d(  grid%tke_1, 'p', config_flags,  &
                                    ids, ide, jds, jde, kds, kde,      &
                                    ims, ime, jms, jme, kms, kme,      &
                                    ips, ipe, jps, jpe, kps, kpe,      &
                                    grid%i_start(ij), grid%i_end(ij),  &
                                    grid%j_start(ij), grid%j_end(ij),  &
                                    k_start    , k_end                )
         END DO
         !$OMP END PARALLEL DO

!---  end of positive definite physics tendency update

       END IF  ! end if for tke_adv_opt

#ifdef DM_PARALLEL
!
!  Stencils for patch communications  (WCS, 29 June 2001)
!
!          * * * * *            
!          * * * * *            
!          * * + * *            
!          * * * * *            
!          * * * * *            
!
! ru_m         x
! rv_m         x
! ww_m         x
! mut          x
!
!--------------------------------------------------------------

#  include "HALO_EM_D.inc"
! WCS addition 11/19/08
#  include "PERIOD_EM_DA.inc"
#endif

!
!
! (4) Still within the RK loop, the scalar variables are advanced.
!
!    For the moist and chem variables, each one is advanced
!    individually, using named loops "moist_variable_loop:"
!    and "chem_variable_loop:".  Each RK substep begins by
!    calculating the advective tendency, and, for the first RK step, 
!    3D mixing (calling rk_scalar_tend) followed by an update
!    of the scalar (calling rk_update_scalar).
!

!

       PRINT *,'  Lluis PARAM_FIRST_SCALAR: ', PARAM_FIRST_SCALAR,    &
         ' p_qv: ',p_qv, ' p_qc: ',p_qc,' U(moist): ', UBOUND(moist)
       PRINT *,'   moist: ',moist(config_flags%i_check_point, 2,   &
               config_flags%j_check_point,:)

       moist_scalar_advance: IF (num_3d_m >= PARAM_FIRST_SCALAR )  THEN

         moist_variable_loop: DO im = PARAM_FIRST_SCALAR, num_3d_m

! adv_moist_cond is set in module_physics_init based on mp_physics choice
!       true except for Ferrier scheme

           IF (grid%adv_moist_cond .or. im==p_qv ) THEN

             !$OMP PARALLEL DO   &
             !$OMP PRIVATE ( ij )
             moist_tile_loop_1: DO ij = 1 , grid%num_tiles

               CALL wrf_debug ( 200 , ' call rk_scalar_tend' )
               tenddec = .false.
           PRINT *,'  Lluis before rk_update_scalar moist im=',im,         &
             ' moist_old moist_tend moist________'
           DO iz = kms, kme
             PRINT *,moist_old(config_flags%i_check_point, iz,             &
               config_flags%j_check_point,im),                             &
               moist_tend(config_flags%i_check_point, iz,                  &
               config_flags%j_check_point,im),                             &
               moist(config_flags%i_check_point, iz,                       &
               config_flags%j_check_point,im)
           END DO

BENCH_START(rk_scalar_tend_tim)
               CALL rk_scalar_tend (  im, im, config_flags, tenddec,         & 
                           rk_step, dt_rk,                                   &
                           grid%ru_m, grid%rv_m, grid%ww_m,                  &
                           grid%muts, grid%mub, grid%mu_1,                   &
                           grid%alt,                                         &
                           moist_old(ims,kms,jms,im),                        &
                           moist(ims,kms,jms,im),                            &
                           moist_tend(ims,kms,jms,im),                       &
                           advect_tend,h_tendency,z_tendency,grid%rqvften,   & 
                           grid%qv_base, .true., grid%fnm, grid%fnp,         &
                           grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv,&
                           grid%msfvy, grid%msftx,grid%msfty,                & 
                           grid%rdx, grid%rdy, grid%rdn, grid%rdnw, grid%khdif, &
                           grid%kvdif, grid%xkhh,                            &
                           grid%diff_6th_opt, grid%diff_6th_factor,          &
                           config_flags%moist_adv_opt,                       &
                           ids, ide, jds, jde, kds, kde,     &
                           ims, ime, jms, jme, kms, kme,     &
                           grid%i_start(ij), grid%i_end(ij), &
                           grid%j_start(ij), grid%j_end(ij), &
                           k_start    , k_end               )

BENCH_END(rk_scalar_tend_tim)

BENCH_START(rlx_bdy_scalar_tim)
               IF( ( config_flags%specified .or. config_flags%nested ) .and. rk_step == 1 ) THEN 
                 IF ( im .EQ. P_QV .OR. config_flags%nested ) THEN
                   CALL relax_bdy_scalar ( moist_tend(ims,kms,jms,im),            & 
                                     moist(ims,kms,jms,im),  grid%mut,         &
                                     moist_bxs(jms,kms,1,im),moist_bxe(jms,kms,1,im), &
                                     moist_bys(ims,kms,1,im),moist_bye(ims,kms,1,im), &
                                     moist_btxs(jms,kms,1,im),moist_btxe(jms,kms,1,im), &
                                     moist_btys(ims,kms,1,im),moist_btye(ims,kms,1,im), &
                                     config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
                                     grid%dtbc, grid%fcx, grid%gcx,             &
                                     config_flags,               &
                                     ids,ide, jds,jde, kds,kde,  & ! domain dims
                                     ims,ime, jms,jme, kms,kme,  & ! memory dims
                                     ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                     grid%i_start(ij), grid%i_end(ij),      &
                                     grid%j_start(ij), grid%j_end(ij),      &
                                     k_start, k_end                        )

                   CALL spec_bdy_scalar  ( moist_tend(ims,kms,jms,im),                &
                                     moist_bxs(jms,kms,1,im),moist_bxe(jms,kms,1,im), &
                                     moist_bys(ims,kms,1,im),moist_bye(ims,kms,1,im), &
                                     moist_btxs(jms,kms,1,im),moist_btxe(jms,kms,1,im), &
                                     moist_btys(ims,kms,1,im),moist_btye(ims,kms,1,im), &
                                     config_flags%spec_bdy_width, grid%spec_zone,                 &
                                     config_flags,               &
                                     ids,ide, jds,jde, kds,kde,  & ! domain dims
                                     ims,ime, jms,jme, kms,kme,  & ! memory dims
                                     ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                     grid%i_start(ij), grid%i_end(ij),          &
                                     grid%j_start(ij), grid%j_end(ij),          &
                                     k_start, k_end                               )
                 ENDIF
               ENDIF
BENCH_END(rlx_bdy_scalar_tim)

             ENDDO moist_tile_loop_1
             !$OMP END PARALLEL DO

             !$OMP PARALLEL DO   &
             !$OMP PRIVATE ( ij )
             moist_tile_loop_2: DO ij = 1 , grid%num_tiles

               CALL wrf_debug ( 200 , ' call rk_update_scalar' )
               tenddec = .false.

BENCH_START(update_scal_tim)
               CALL rk_update_scalar( scs=im, sce=im,                                  &
                               scalar_1=moist_old(ims,kms,jms,im),                     &
                               scalar_2=moist(ims,kms,jms,im),                         &
                               sc_tend=moist_tend(ims,kms,jms,im),                     &
!                              advh_t=advh_t(ims,kms,jms,1),                           & 
!                              advz_t=advz_t(ims,kms,jms,1),                           & 
                               advect_tend=advect_tend,                                &
                               h_tendency=h_tendency, z_tendency=z_tendency,           & 
                               msftx=grid%msftx,msfty=grid%msfty,                      &
                               mu_old=grid%mu_1, mu_new=grid%mu_2, mu_base=grid%mub,   &
                               rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone,    &
                               config_flags=config_flags, tenddec=tenddec,             & 
                               ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde,   &
                               ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme,   &
                               its=grid%i_start(ij), ite=grid%i_end(ij),               &
                               jts=grid%j_start(ij), jte=grid%j_end(ij),               &
                               kts=k_start    , kte=k_end                              )
BENCH_END(update_scal_tim)
           PRINT *,'  Lluis after rk_update_scalar moist im=',im,         &
             ' moist_old moist_tend moist________'
           DO iz = kms, kme
             PRINT *,moist_old(config_flags%i_check_point, iz,             &
               config_flags%j_check_point,im),                             &
               moist_tend(config_flags%i_check_point, iz,                  &
               config_flags%j_check_point,im),                             &
               moist(config_flags%i_check_point, iz,                       &
               config_flags%j_check_point,im)
           END DO

BENCH_START(flow_depbdy_tim)
               IF( config_flags%specified ) THEN
                 IF(im .ne. P_QV)THEN
                   CALL flow_dep_bdy  (  moist(ims,kms,jms,im),                 &
                                grid%ru_m, grid%rv_m, config_flags,             &
                                grid%spec_zone,                                 &
                                ids,ide, jds,jde, kds,kde,                      &
                                ims,ime, jms,jme, kms,kme,                      &
                                ips,ipe, jps,jpe, kps,kpe,                      &
                                grid%i_start(ij), grid%i_end(ij),               &
                                grid%j_start(ij), grid%j_end(ij),               &
                                k_start, k_end                               )
                 ENDIF
               ENDIF
BENCH_END(flow_depbdy_tim)

             ENDDO moist_tile_loop_2
             !$OMP END PARALLEL DO

           ENDIF  !-- if (grid%adv_moist_cond .or. im==p_qv ) then

         ENDDO moist_variable_loop

       ENDIF moist_scalar_advance

BENCH_START(tke_adv_tim)
       TKE_advance: IF (config_flags%km_opt .eq. 2) then
#ifdef DM_PARALLEL
         IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#       include "HALO_EM_TKE_ADVECT_3.inc"
         ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#       include "HALO_EM_TKE_ADVECT_5.inc"
         ELSE
          WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
          CALL wrf_error_fatal(TRIM(wrf_err_message))
         ENDIF
#endif
         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         tke_tile_loop_1: DO ij = 1 , grid%num_tiles

           CALL wrf_debug ( 200 , ' call rk_scalar_tend for tke' )
           tenddec = .false.
           CALL rk_scalar_tend ( 1, 1, config_flags, tenddec,                      & 
                            rk_step, dt_rk,                                        &
                            grid%ru_m, grid%rv_m, grid%ww_m,                       &
                            grid%muts, grid%mub, grid%mu_1,                        &
                            grid%alt,                                              &
                            grid%tke_1,                                            &
                            grid%tke_2,                                            &
                            tke_tend(ims,kms,jms),                                 &
                            advect_tend,h_tendency,z_tendency,grid%rqvften,        & 
                            grid%qv_base, .false., grid%fnm, grid%fnp,             &
                            grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv,     &
                            grid%msfvy, grid%msftx,grid%msfty,                     &
                            grid%rdx, grid%rdy, grid%rdn, grid%rdnw, grid%khdif,   &
                            grid%kvdif, grid%xkhh,                                 &
                            grid%diff_6th_opt, grid%diff_6th_factor,               &
                            config_flags%tke_adv_opt,                              &
                            ids, ide, jds, jde, kds, kde,     &
                            ims, ime, jms, jme, kms, kme,     &
                            grid%i_start(ij), grid%i_end(ij), &
                            grid%j_start(ij), grid%j_end(ij), &
                            k_start    , k_end               )

         ENDDO tke_tile_loop_1
         !$OMP END PARALLEL DO

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         tke_tile_loop_2: DO ij = 1 , grid%num_tiles

           CALL wrf_debug ( 200 , ' call rk_update_scalar' )
           tenddec = .false.
           CALL rk_update_scalar( scs=1,  sce=1,                                          &
                                  scalar_1=grid%tke_1,                                    &
                                  scalar_2=grid%tke_2,                                    &
                                  sc_tend=tke_tend(ims,kms,jms),                          &
!                                 advh_t=advh_t(ims,kms,jms,1),                           & 
!                                 advz_t=advz_t(ims,kms,jms,1),                           & 
                                  advect_tend=advect_tend,                                &
                                  h_tendency=h_tendency, z_tendency=z_tendency,           & 
                                  msftx=grid%msftx,msfty=grid%msfty,                      &
                                  mu_old=grid%mu_1, mu_new=grid%mu_2, mu_base=grid%mub,   &
                                  rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone,    &
                                  config_flags=config_flags, tenddec=tenddec,             & 
                                  ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde,   &
                                  ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme,   &
                                  its=grid%i_start(ij), ite=grid%i_end(ij),               &
                                  jts=grid%j_start(ij), jte=grid%j_end(ij),               &
                                  kts=k_start    , kte=k_end                              )

! bound the tke (greater than 0, less than tke_upper_bound)

           CALL bound_tke( grid%tke_2, grid%tke_upper_bound,    &
                           ids, ide, jds, jde, kds, kde,        &
                           ims, ime, jms, jme, kms, kme,        &
                           grid%i_start(ij), grid%i_end(ij),    &
                           grid%j_start(ij), grid%j_end(ij),    &
                           k_start    , k_end                  )

           IF( config_flags%specified .or. config_flags%nested ) THEN
              CALL flow_dep_bdy (  grid%tke_2,                     &
                                   grid%ru_m, grid%rv_m, config_flags,               &
                                   grid%spec_zone,                              &
                                   ids,ide, jds,jde, kds,kde,  & ! domain dims
                                   ims,ime, jms,jme, kms,kme,  & ! memory dims
                                   ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                   grid%i_start(ij), grid%i_end(ij),       &
                                   grid%j_start(ij), grid%j_end(ij),       &
                                   k_start, k_end                               )
           ENDIF
         ENDDO tke_tile_loop_2
         !$OMP END PARALLEL DO

       ENDIF TKE_advance
BENCH_END(tke_adv_tim)

#ifdef WRF_CHEM
!  next the chemical species
BENCH_START(chem_adv_tim)
       chem_scalar_advance: IF (num_3d_c >= PARAM_FIRST_SCALAR)  THEN

         chem_variable_loop: DO ic = PARAM_FIRST_SCALAR, num_3d_c

           !$OMP PARALLEL DO   &
           !$OMP PRIVATE ( ij )
           chem_tile_loop_1: DO ij = 1 , grid%num_tiles

             CALL wrf_debug ( 200 , ' call rk_scalar_tend in chem_tile_loop_1' )
             tenddec = (( config_flags%chemdiag == USECHEMDIAG ) .and. &
                        ( adv_ct_indices(ic) >= PARAM_FIRST_SCALAR ))
             CALL rk_scalar_tend ( ic, ic, config_flags, tenddec,                & 
                              rk_step, dt_rk,                                    &
                              grid%ru_m, grid%rv_m, grid%ww_m,                   &
                              grid%muts, grid%mub, grid%mu_1,                    &
                              grid%alt,                                          &
                              chem_old(ims,kms,jms,ic),                          &
                              chem(ims,kms,jms,ic),                              &
                              chem_tend(ims,kms,jms,ic),                         &
                              advect_tend,h_tendency,z_tendency,grid%rqvften,    & 
                              grid%qv_base, .false., grid%fnm, grid%fnp,         &
                              grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
                              grid%msfvy, grid%msftx,grid%msfty,                 &
                              grid%rdx, grid%rdy, grid%rdn, grid%rdnw,           &
                              grid%khdif, grid%kvdif, grid%xkhh,                 &
                              grid%diff_6th_opt, grid%diff_6th_factor,           &
                              config_flags%chem_adv_opt,                         &
                              ids, ide, jds, jde, kds, kde,                      &
                              ims, ime, jms, jme, kms, kme,                      &
                              grid%i_start(ij), grid%i_end(ij),                  &
                              grid%j_start(ij), grid%j_end(ij),                  &
                              k_start    , k_end                                )
!
! Currently, chemistry species with specified boundaries (i.e. the mother
! domain)  are being over written by flow_dep_bdy_chem. So, relax_bdy and
! spec_bdy are only called for nests. For boundary conditions from global model or larger domain,
! chem is uncoupled, and only used for one row/column on inflow (if have_bcs_chem=.true.) 
!
           IF( ( config_flags%nested ) .and. rk_step == 1 ) THEN
             IF(ic.eq.1)CALL wrf_debug ( 10 , ' have_bcs_chem' )
             CALL relax_bdy_scalar ( chem_tend(ims,kms,jms,ic),                                    &
                                     chem(ims,kms,jms,ic),  grid%mut,                              &
                                     chem_bxs(jms,kms,1,ic),chem_bxe(jms,kms,1,ic),                &
                                     chem_bys(ims,kms,1,ic),chem_bye(ims,kms,1,ic),                &
                                     chem_btxs(jms,kms,1,ic),chem_btxe(jms,kms,1,ic),              &
                                     chem_btys(ims,kms,1,ic),chem_btye(ims,kms,1,ic),              &
                                     config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
                                     grid%dtbc, grid%fcx, grid%gcx,                                &
                                     config_flags,                                                 &
                                     ids,ide, jds,jde, kds,kde,                                    &
                                     ims,ime, jms,jme, kms,kme,                                    &
                                     ips,ipe, jps,jpe, kps,kpe,                                    &
                                     grid%i_start(ij), grid%i_end(ij),                             &
                                     grid%j_start(ij), grid%j_end(ij),                             &
                                     k_start, k_end                                                )
             CALL spec_bdy_scalar  ( chem_tend(ims,kms,jms,ic),                 &
                                     chem_bxs(jms,kms,1,ic),chem_bxe(jms,kms,1,ic),                &
                                     chem_bys(ims,kms,1,ic),chem_bye(ims,kms,1,ic),                &
                                     chem_btxs(jms,kms,1,ic),chem_btxe(jms,kms,1,ic),              &
                                     chem_btys(ims,kms,1,ic),chem_btye(ims,kms,1,ic),              &
                                     config_flags%spec_bdy_width, grid%spec_zone,                  &
                                     config_flags,                                                 &
                                     ids,ide, jds,jde, kds,kde,                                    &
                                     ims,ime, jms,jme, kms,kme,                                    &
                                     ips,ipe, jps,jpe, kps,kpe,                                    &
                                     grid%i_start(ij), grid%i_end(ij),                             &
                                     grid%j_start(ij), grid%j_end(ij),                             &
                                     k_start, k_end                                                )
           ENDIF

         ENDDO chem_tile_loop_1
         !$OMP END PARALLEL DO

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )

         chem_tile_loop_2: DO ij = 1 , grid%num_tiles

           CALL wrf_debug ( 200 , ' call rk_update_scalar' )
           tenddec = (( config_flags%chemdiag == USECHEMDIAG ) .and. &
                      ( adv_ct_indices(ic) >= PARAM_FIRST_SCALAR ))
           CALL rk_update_scalar( scs=ic, sce=ic,                                         &
                                  scalar_1=chem_old(ims,kms,jms,ic),                      &
                                  scalar_2=chem(ims,kms,jms,ic),                          &
                                  sc_tend=chem_tend(ims,kms,jms,ic),                      &
                                  advh_t=advh_ct(ims,kms,jms,adv_ct_indices(ic)),         &
                                  advz_t=advz_ct(ims,kms,jms,adv_ct_indices(ic)),         &
                                  advect_tend=advect_tend,                                &
                                  h_tendency=h_tendency, z_tendency=z_tendency,           & 
                                  msftx=grid%msftx,msfty=grid%msfty,                      &
                                  mu_old=grid%mu_1, mu_new=grid%mu_2, mu_base=grid%mub,   &
                                  rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone,    &
                                  config_flags=config_flags, tenddec=tenddec,             & 
                                  ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde,   &
                                  ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme,   &
                                  its=grid%i_start(ij), ite=grid%i_end(ij),               &
                                  jts=grid%j_start(ij), jte=grid%j_end(ij),               &
                                  kts=k_start    , kte=k_end                              )

           IF( config_flags%specified  ) THEN
             CALL flow_dep_bdy_chem( chem(ims,kms,jms,ic),                          &
                                     chem_bxs(jms,kms,1,ic), chem_btxs(jms,kms,1,ic),  &
                                     chem_bxe(jms,kms,1,ic), chem_btxe(jms,kms,1,ic),  &
                                     chem_bys(ims,kms,1,ic), chem_btys(ims,kms,1,ic),  &
                                     chem_bye(ims,kms,1,ic), chem_btye(ims,kms,1,ic),  &
                                     dt_rk+grid%dtbc,                                  &
                                     config_flags%spec_bdy_width,grid%z,      &
                                     grid%have_bcs_chem,      &
                                     grid%ru_m, grid%rv_m, config_flags,grid%alt,       &
                                     grid%t_1,grid%pb,grid%p,t0,p1000mb,rcp,grid%ph_2,grid%phb,g, &
                                     grid%spec_zone,ic,                  &
                                     ids,ide, jds,jde, kds,kde,  & ! domain dims
                                     ims,ime, jms,jme, kms,kme,  & ! memory dims
                                     ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                     grid%i_start(ij), grid%i_end(ij),   &
                                     grid%j_start(ij), grid%j_end(ij),   &
                                     k_start, k_end                      )
           ENDIF
         ENDDO chem_tile_loop_2
         !$OMP END PARALLEL DO

       ENDDO chem_variable_loop
     ENDIF chem_scalar_advance
BENCH_END(chem_adv_tim)
#endif
!  next the chemical species
BENCH_START(tracer_adv_tim)
       tracer_advance: IF (num_tracer >= PARAM_FIRST_SCALAR)  THEN

         tracer_variable_loop: DO ic = PARAM_FIRST_SCALAR, num_tracer

           !$OMP PARALLEL DO   &
           !$OMP PRIVATE ( ij )
           tracer_tile_loop_1: DO ij = 1 , grid%num_tiles

             CALL wrf_debug ( 15 , ' call rk_scalar_tend in tracer_tile_loop_1' )
             tenddec = .false.
             CALL rk_scalar_tend ( ic, ic, config_flags, tenddec,                & 
                              rk_step, dt_rk,                                    &
                              grid%ru_m, grid%rv_m, grid%ww_m,                   &
                              grid%muts, grid%mub, grid%mu_1,                    &
                              grid%alt,                                          &
                              tracer_old(ims,kms,jms,ic),                          &
                              tracer(ims,kms,jms,ic),                              &
                              tracer_tend(ims,kms,jms,ic),                         &
                              advect_tend,h_tendency,z_tendency,grid%rqvften,    & 
                              grid%qv_base, .false., grid%fnm, grid%fnp,         &
                              grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
                              grid%msfvy, grid%msftx,grid%msfty,                 &
                              grid%rdx, grid%rdy, grid%rdn, grid%rdnw,           &
                              grid%khdif, grid%kvdif, grid%xkhh,                 &
                              grid%diff_6th_opt, grid%diff_6th_factor,           &
                              config_flags%tracer_adv_opt,                         &
                              ids, ide, jds, jde, kds, kde,                      &
                              ims, ime, jms, jme, kms, kme,                      &
                              grid%i_start(ij), grid%i_end(ij),                  &
                              grid%j_start(ij), grid%j_end(ij),                  &
                              k_start    , k_end                                )
!
! Currently, chemistry species with specified boundaries (i.e. the mother
! domain)  are being over written by flow_dep_bdy_chem. So, relax_bdy and
! spec_bdy are only called for nests. For boundary conditions from global model or larger domain,
! chem is uncoupled, and only used for one row/column on inflow (if have_bcs_chem=.true.) 
!
           IF( ( config_flags%nested ) .and. rk_step == 1 ) THEN
             IF(ic.eq.1)CALL wrf_debug ( 10 , ' have_bcs_tracer' )
             CALL relax_bdy_scalar ( tracer_tend(ims,kms,jms,ic),                                    &
                                     tracer(ims,kms,jms,ic),  grid%mut,                              &
                                     tracer_bxs(jms,kms,1,ic),tracer_bxe(jms,kms,1,ic),                &
                                     tracer_bys(ims,kms,1,ic),tracer_bye(ims,kms,1,ic),                &
                                     tracer_btxs(jms,kms,1,ic),tracer_btxe(jms,kms,1,ic),              &
                                     tracer_btys(ims,kms,1,ic),tracer_btye(ims,kms,1,ic),              &
                                     config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
                                     grid%dtbc, grid%fcx, grid%gcx,                                &
                                     config_flags,                                                 &
                                     ids,ide, jds,jde, kds,kde,                                    &
                                     ims,ime, jms,jme, kms,kme,                                    &
                                     ips,ipe, jps,jpe, kps,kpe,                                    &
                                     grid%i_start(ij), grid%i_end(ij),                             &
                                     grid%j_start(ij), grid%j_end(ij),                             &
                                     k_start, k_end                                                )
             CALL spec_bdy_scalar  ( tracer_tend(ims,kms,jms,ic),                 &
                                     tracer_bxs(jms,kms,1,ic),tracer_bxe(jms,kms,1,ic),                &
                                     tracer_bys(ims,kms,1,ic),tracer_bye(ims,kms,1,ic),                &
                                     tracer_btxs(jms,kms,1,ic),tracer_btxe(jms,kms,1,ic),              &
                                     tracer_btys(ims,kms,1,ic),tracer_btye(ims,kms,1,ic),              &
                                     config_flags%spec_bdy_width, grid%spec_zone,                  &
                                     config_flags,                                                 &
                                     ids,ide, jds,jde, kds,kde,                                    &
                                     ims,ime, jms,jme, kms,kme,                                    &
                                     ips,ipe, jps,jpe, kps,kpe,                                    &
                                     grid%i_start(ij), grid%i_end(ij),                             &
                                     grid%j_start(ij), grid%j_end(ij),                             &
                                     k_start, k_end                                                )
           ENDIF

         ENDDO tracer_tile_loop_1
         !$OMP END PARALLEL DO

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )

         tracer_tile_loop_2: DO ij = 1 , grid%num_tiles

           CALL wrf_debug ( 200 , ' call rk_update_scalar' )
           tenddec = .false.
           CALL rk_update_scalar( scs=ic, sce=ic,                                         &
                                  scalar_1=tracer_old(ims,kms,jms,ic),                    &
                                  scalar_2=tracer(ims,kms,jms,ic),                        &
                                  sc_tend=tracer_tend(ims,kms,jms,ic),                    &
!                                 advh_t=advh_t(ims,kms,jms,1),                           & 
!                                 advz_t=advz_t(ims,kms,jms,1),                           & 
                                  advect_tend=advect_tend,                                &
                                  h_tendency=h_tendency, z_tendency=z_tendency,           & 
                                  msftx=grid%msftx,msfty=grid%msfty,                      &
                                  mu_old=grid%mu_1, mu_new=grid%mu_2, mu_base=grid%mub,   &
                                  rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone,    &
                                  config_flags=config_flags, tenddec=tenddec,             & 
                                  ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde,   &
                                  ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme,   &
                                  its=grid%i_start(ij), ite=grid%i_end(ij),               &
                                  jts=grid%j_start(ij), jte=grid%j_end(ij),               &
                                  kts=k_start    , kte=k_end                              )

           IF( config_flags%specified  ) THEN
#ifdef WRF_CHEM
             CALL flow_dep_bdy_tracer( tracer(ims,kms,jms,ic),                             &
                                     tracer_bxs(jms,kms,1,ic), tracer_btxs(jms,kms,1,ic),  &
                                     tracer_bxe(jms,kms,1,ic), tracer_btxe(jms,kms,1,ic),  &
                                     tracer_bys(ims,kms,1,ic), tracer_btys(ims,kms,1,ic),  &
                                     tracer_bye(ims,kms,1,ic), tracer_btye(ims,kms,1,ic),  &
                                     dt_rk+grid%dtbc,                                  &
                                     config_flags%spec_bdy_width,grid%z,      &
                                     grid%have_bcs_tracer,      &
                                     grid%ru_m, grid%rv_m, config_flags%tracer_opt,grid%alt,       &
                                     grid%t_1,grid%pb,grid%p,t0,p1000mb,rcp,grid%ph_2,grid%phb,g, &
                                     grid%spec_zone,ic,                  &
                                     ids,ide, jds,jde, kds,kde,  & ! domain dims
                                     ims,ime, jms,jme, kms,kme,  & ! memory dims
                                     ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                     grid%i_start(ij), grid%i_end(ij),   &
                                     grid%j_start(ij), grid%j_end(ij),   &
                                     k_start, k_end                      )
#else
             CALL flow_dep_bdy  ( tracer(ims,kms,jms,ic),     &
                                  grid%ru_m, grid%rv_m, config_flags,   &
                                  grid%spec_zone,                  &
                                  ids,ide, jds,jde, kds,kde,  & ! domain dims
                                  ims,ime, jms,jme, kms,kme,  & ! memory dims
                                  ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                  grid%i_start(ij), grid%i_end(ij),  &
                                  grid%j_start(ij), grid%j_end(ij),  &
                                  k_start, k_end                    )
#endif
           ENDIF
         ENDDO tracer_tile_loop_2
         !$OMP END PARALLEL DO

       ENDDO tracer_variable_loop
     ENDIF tracer_advance
BENCH_END(tracer_adv_tim)

!  next the other scalar species
     other_scalar_advance: IF (num_3d_s >= PARAM_FIRST_SCALAR)  THEN

       scalar_variable_loop: do is = PARAM_FIRST_SCALAR, num_3d_s
         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         scalar_tile_loop_1: DO ij = 1 , grid%num_tiles

           CALL wrf_debug ( 200 , ' call rk_scalar_tend' )
           tenddec = .false.
           CALL rk_scalar_tend ( is, is, config_flags, tenddec,                   & 
                                 rk_step, dt_rk,                                  &
                                 grid%ru_m, grid%rv_m, grid%ww_m,                 &
                                 grid%muts, grid%mub, grid%mu_1,                  &
                                 grid%alt,                                        &
                                 scalar_old(ims,kms,jms,is),                      &
                                 scalar(ims,kms,jms,is),                          &
                                 scalar_tend(ims,kms,jms,is),                     &
                                 advect_tend,h_tendency,z_tendency,grid%rqvften,  & 
                                 grid%qv_base, .false., grid%fnm, grid%fnp,       &
                                 grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
                                 grid%msfvy, grid%msftx,grid%msfty,               &
                                 grid%rdx, grid%rdy, grid%rdn, grid%rdnw,         &
                                 grid%khdif, grid%kvdif, grid%xkhh,               &
                                 grid%diff_6th_opt, grid%diff_6th_factor,         &
                                 config_flags%scalar_adv_opt,                     &
                                 ids, ide, jds, jde, kds, kde,     &
                                 ims, ime, jms, jme, kms, kme,     &
                                 grid%i_start(ij), grid%i_end(ij), &
                                 grid%j_start(ij), grid%j_end(ij), &
                                 k_start    , k_end               )

           IF( config_flags%nested .and. (rk_step == 1) ) THEN

               CALL relax_bdy_scalar ( scalar_tend(ims,kms,jms,is),                            &
                                       scalar(ims,kms,jms,is),  grid%mut,                      &
                                       scalar_bxs(jms,kms,1,is),scalar_bxe(jms,kms,1,is),      &
                                       scalar_bys(ims,kms,1,is),scalar_bye(ims,kms,1,is),      &
                                       scalar_btxs(jms,kms,1,is),scalar_btxe(jms,kms,1,is),    &
                                       scalar_btys(ims,kms,1,is),scalar_btye(ims,kms,1,is),    &
                                       config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
                                       grid%dtbc, grid%fcx, grid%gcx,                          &
                                       config_flags,                                           &
                                       ids,ide, jds,jde, kds,kde,                              &
                                       ims,ime, jms,jme, kms,kme,                              &
                                       ips,ipe, jps,jpe, kps,kpe,                              &
                                       grid%i_start(ij), grid%i_end(ij),                       &
                                       grid%j_start(ij), grid%j_end(ij),                       &
                                       k_start, k_end                                          )

               CALL spec_bdy_scalar  ( scalar_tend(ims,kms,jms,is),                            &
                                       scalar_bxs(jms,kms,1,is),scalar_bxe(jms,kms,1,is),      &
                                       scalar_bys(ims,kms,1,is),scalar_bye(ims,kms,1,is),      &
                                       scalar_btxs(jms,kms,1,is),scalar_btxe(jms,kms,1,is),    &
                                       scalar_btys(ims,kms,1,is),scalar_btye(ims,kms,1,is),    &
                                       config_flags%spec_bdy_width, grid%spec_zone,            &
                                       config_flags,                                           &
                                       ids,ide, jds,jde, kds,kde,                              &
                                       ims,ime, jms,jme, kms,kme,                              &
                                       ips,ipe, jps,jpe, kps,kpe,                              &
                                       grid%i_start(ij), grid%i_end(ij),                       &
                                       grid%j_start(ij), grid%j_end(ij),                       &
                                       k_start, k_end                                          )

           ENDIF ! b.c test for chem nested boundary condition

         ENDDO scalar_tile_loop_1
         !$OMP END PARALLEL DO

         !$OMP PARALLEL DO   &
         !$OMP PRIVATE ( ij )
         scalar_tile_loop_2: DO ij = 1 , grid%num_tiles

           CALL wrf_debug ( 200 , ' call rk_update_scalar' )
           tenddec = .false.
           CALL rk_update_scalar( scs=is, sce=is,                                         &
                                  scalar_1=scalar_old(ims,kms,jms,is),                    &
                                  scalar_2=scalar(ims,kms,jms,is),                        &
                                  sc_tend=scalar_tend(ims,kms,jms,is),                    &
!                                 advh_t=advh_t(ims,kms,jms,1),                           & 
!                                 advz_t=advz_t(ims,kms,jms,1),                           & 
                                  advect_tend=advect_tend,                                &
                                  h_tendency=h_tendency, z_tendency=z_tendency,           & 
                                  msftx=grid%msftx,msfty=grid%msfty,                      &
                                  mu_old=grid%mu_1, mu_new=grid%mu_2, mu_base=grid%mub,   &
                                  rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone,    &
                                  config_flags=config_flags, tenddec=tenddec,             & 
                                  ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde,   &
                                  ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme,   &
                                  its=grid%i_start(ij), ite=grid%i_end(ij),               &
                                  jts=grid%j_start(ij), jte=grid%j_end(ij),               &
                                  kts=k_start    , kte=k_end                              )

           IF( config_flags%specified ) THEN

             CALL flow_dep_bdy  ( scalar(ims,kms,jms,is),     &
                                  grid%ru_m, grid%rv_m, config_flags,   &
                                  grid%spec_zone,                  &
                                  ids,ide, jds,jde, kds,kde,  & ! domain dims
                                  ims,ime, jms,jme, kms,kme,  & ! memory dims
                                  ips,ipe, jps,jpe, kps,kpe,  & ! patch  dims
                                  grid%i_start(ij), grid%i_end(ij),  &
                                  grid%j_start(ij), grid%j_end(ij),  &
                                  k_start, k_end                    )
           ENDIF

         ENDDO scalar_tile_loop_2
         !$OMP END PARALLEL DO

       ENDDO scalar_variable_loop

     ENDIF other_scalar_advance

 !  update the pressure and density at the new time level

     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij )
     DO ij = 1 , grid%num_tiles

BENCH_START(calc_p_rho_tim)

       CALL calc_p_rho_phi( moist, num_3d_m,                &
                            grid%al, grid%alb, grid%mu_2, grid%muts,              &
                            grid%ph_2, grid%p, grid%pb, grid%t_2,                 &
                            p0, t0, grid%znu, grid%dnw, grid%rdnw,           &
                            grid%rdn, config_flags%non_hydrostatic,             &
                            ids, ide, jds, jde, kds, kde,     &
                            ims, ime, jms, jme, kms, kme,     &
                            grid%i_start(ij), grid%i_end(ij), &
                            grid%j_start(ij), grid%j_end(ij), &
                            k_start    , k_end               )

BENCH_END(calc_p_rho_tim)

     ENDDO
     !$OMP END PARALLEL DO

!  Reset the boundary conditions if there is another corrector step.
!  (rk_step < rk_order), else we'll handle it at the end of everything
!  (after the split physics, before exiting the timestep).

     rk_step_1_check: IF ( rk_step < rk_order ) THEN

!-----------------------------------------------------------
!  rk3 substep polar filter for scalars (moist,chem,scalar)
!-----------------------------------------------------------

       IF (config_flags%polar) THEN 
         IF ( num_3d_m >= PARAM_FIRST_SCALAR ) THEN
           CALL wrf_debug ( 200 , ' call filter moist ' )
           DO im = PARAM_FIRST_SCALAR, num_3d_m
             CALL couple_scalars_for_filter ( FIELD=moist(ims,kms,jms,im)              &
                    ,MU=grid%mu_2 , MUB=grid%mub                                 &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe          )
             CALL pxft ( grid=grid                                               &
                    ,lineno=__LINE__                                             &
                    ,flag_uv            = 0                                      &
                    ,flag_rurv          = 0                                      &
                    ,flag_wph           = 0                                      &
                    ,flag_ww            = 0                                      &
                    ,flag_t             = 0                                      &
                    ,flag_mu            = 0                                      &
                    ,flag_mut           = 0                                      &
                    ,flag_moist         = im                                     &
                    ,flag_chem          = 0                                      &
                    ,flag_scalar        = 0                                      &
                    ,flag_tracer        = 0                                      &
                    ,positive_definite=.FALSE.                                   &
                    ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                    ,fft_filter_lat = config_flags%fft_filter_lat                &
                    ,dclat = dclat                                               &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                    ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                    ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
             CALL uncouple_scalars_for_filter ( FIELD=moist(ims,kms,jms,im)            &
                    ,MU=grid%mu_2 , MUB=grid%mub                                 &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe          )
           END DO
         END IF
   
         IF ( num_3d_c >= PARAM_FIRST_SCALAR ) THEN
           CALL wrf_debug ( 200 , ' call filter chem ' )
           DO im = PARAM_FIRST_SCALAR, num_3d_c
             CALL couple_scalars_for_filter ( FIELD=chem(ims,kms,jms,im)               &
                    ,MU=grid%mu_2 , MUB=grid%mub                                 &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe           )
             CALL pxft ( grid=grid                                               &
                    ,lineno=__LINE__                                             &
                    ,flag_uv            = 0                                      &
                    ,flag_rurv          = 0                                      &
                    ,flag_wph           = 0                                      &
                    ,flag_ww            = 0                                      &
                    ,flag_t             = 0                                      &
                    ,flag_mu            = 0                                      &
                    ,flag_mut           = 0                                      &
                    ,flag_moist         = 0                                      &
                    ,flag_chem          = im                                     &
                    ,flag_tracer        = 0                                      &
                    ,flag_scalar        = 0                                      &
                    ,positive_definite=.FALSE.                                   &
                    ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                    ,fft_filter_lat = config_flags%fft_filter_lat                &
                    ,dclat = dclat                                               &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                    ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                    ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
             CALL uncouple_scalars_for_filter ( FIELD=chem(ims,kms,jms,im)             &
                    ,MU=grid%mu_2 , MUB=grid%mub                                 &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe          )
           END DO
         END IF
         IF ( num_tracer >= PARAM_FIRST_SCALAR ) THEN
           CALL wrf_debug ( 200 , ' call filter tracer ' )
           DO im = PARAM_FIRST_SCALAR, num_tracer
             CALL couple_scalars_for_filter ( FIELD=tracer(ims,kms,jms,im)               &
                    ,MU=grid%mu_2 , MUB=grid%mub                                 &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe           )
             CALL pxft ( grid=grid                                               &
                    ,lineno=__LINE__                                             &
                    ,flag_uv            = 0                                      &
                    ,flag_rurv          = 0                                      &
                    ,flag_wph           = 0                                      &
                    ,flag_ww            = 0                                      &
                    ,flag_t             = 0                                      &
                    ,flag_mu            = 0                                      &
                    ,flag_mut           = 0                                      &
                    ,flag_moist         = 0                                      &
                    ,flag_chem          = 0                                      &
                    ,flag_tracer        = im                                      &
                    ,flag_scalar        = 0                                      &
                    ,positive_definite=.FALSE.                                   &
                    ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                    ,fft_filter_lat = config_flags%fft_filter_lat                &
                    ,dclat = dclat                                               &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                    ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                    ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
             CALL uncouple_scalars_for_filter ( FIELD=tracer(ims,kms,jms,im)             &
                    ,MU=grid%mu_2 , MUB=grid%mub                                 &
                    ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                    ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                    ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe          )
           END DO
         END IF
   
         IF ( num_3d_s >= PARAM_FIRST_SCALAR ) THEN
           CALL wrf_debug ( 200 , ' call filter scalar ' )
           DO im = PARAM_FIRST_SCALAR, num_3d_s
             CALL couple_scalars_for_filter ( FIELD=scalar(ims,kms,jms,im)           &
                  ,MU=grid%mu_2 , MUB=grid%mub                                 &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe          )
             CALL pxft ( grid=grid                                             &
                  ,lineno=__LINE__                                             &
                  ,flag_uv            = 0                                      &
                  ,flag_rurv          = 0                                      &
                  ,flag_wph           = 0                                      &
                  ,flag_ww            = 0                                      &
                  ,flag_t             = 0                                      &
                  ,flag_mu            = 0                                      &
                  ,flag_mut           = 0                                      &
                  ,flag_moist         = 0                                      &
                  ,flag_chem          = 0                                      &
                  ,flag_tracer        = 0                                      &
                  ,flag_scalar        = im                                     &
                  ,positive_definite=.FALSE.                                   &
                  ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                  ,fft_filter_lat = config_flags%fft_filter_lat                &
                  ,dclat = dclat                                               &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                  ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                  ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
             CALL uncouple_scalars_for_filter ( FIELD=scalar(ims,kms,jms,im)   &
                  ,MU=grid%mu_2 , MUB=grid%mub                                 &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe          )
           END DO
         END IF
       END IF ! polar filter test

!-----------------------------------------------------------
!  END rk3 substep polar filter for scalars (moist,chem,scalar)
!-----------------------------------------------------------

!-----------------------------------------------------------
!  Stencils for patch communications  (WCS, 29 June 2001)
!
!  here's where we need a wide comm stencil - these are the 
!  uncoupled variables so are used for high order calc in
!  advection and mixong routines.
!
!
!                                  * * * * * * *
!                     * * * * *    * * * * * * *
!            *        * * * * *    * * * * * * *
!          * + *      * * + * *    * * * + * * *
!            *        * * * * *    * * * * * * *
!                     * * * * *    * * * * * * *
!                                  * * * * * * *
!
! al        x
!
!  2D variable
! mu_2      x
!
! (adv order <=4)
! u_2                     x
! v_2                     x
! w_2                     x
! t_2                     x
! ph_2                    x
!
! (adv order <=6)
! u_2                                    x
! v_2                                    x
! w_2                                    x
! t_2                                    x
! ph_2                                   x
!
!  4D variable
! moist                   x
! chem                    x
! scalar                  x

#ifdef DM_PARALLEL
       IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#    include "HALO_EM_D2_3.inc"
       ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#    include "HALO_EM_D2_5.inc"
       ELSE 
         WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
         CALL wrf_error_fatal(TRIM(wrf_err_message))
       ENDIF
#  include "PERIOD_BDY_EM_D.inc"
#  include "PERIOD_BDY_EM_MOIST2.inc"
#  include "PERIOD_BDY_EM_CHEM2.inc"
#  include "PERIOD_BDY_EM_TRACER2.inc"
#  include "PERIOD_BDY_EM_SCALAR2.inc"
#endif

BENCH_START(bc_end_tim)
       !$OMP PARALLEL DO   &
       !$OMP PRIVATE ( ij )
       tile_bc_loop_1: DO ij = 1 , grid%num_tiles
         CALL wrf_debug ( 200 , ' call rk_phys_bc_dry_2' )

         CALL rk_phys_bc_dry_2( config_flags,                     &
                                grid%u_2, grid%v_2, grid%w_2,     &
                                grid%t_2, grid%ph_2, grid%mu_2,   &
                                ids, ide, jds, jde, kds, kde,     &
                                ims, ime, jms, jme, kms, kme,     &
                                ips, ipe, jps, jpe, kps, kpe,     &
                                grid%i_start(ij), grid%i_end(ij), &
                                grid%j_start(ij), grid%j_end(ij), &
                                k_start    , k_end               )

BENCH_START(diag_w_tim)
         IF (.not. config_flags%non_hydrostatic) THEN
           CALL diagnose_w( ph_tend, grid%ph_2, grid%ph_1, grid%w_2, grid%muts, dt_rk,  &
                            grid%u_2, grid%v_2, grid%ht,                           &
                            grid%cf1, grid%cf2, grid%cf3, grid%rdx, grid%rdy, grid%msftx, grid%msfty, &
                            ids, ide, jds, jde, kds, kde,           &
                            ims, ime, jms, jme, kms, kme,           &
                            grid%i_start(ij), grid%i_end(ij),       &
                            grid%j_start(ij), grid%j_end(ij),       &
                            k_start    , k_end                     )
         ENDIF
BENCH_END(diag_w_tim)

         IF (num_3d_m >= PARAM_FIRST_SCALAR) THEN

           moisture_loop_bdy_1 : DO im = PARAM_FIRST_SCALAR , num_3d_m
  
             CALL set_physical_bc3d( moist(ims,kms,jms,im), 'p', config_flags,   &
                                     ids, ide, jds, jde, kds, kde,             &
                                     ims, ime, jms, jme, kms, kme,             &
                                     ips, ipe, jps, jpe, kps, kpe,             &
                                     grid%i_start(ij), grid%i_end(ij),                   &
                                     grid%j_start(ij), grid%j_end(ij),                   &
                                     k_start    , k_end                       )
           END DO moisture_loop_bdy_1

         ENDIF

         IF (num_3d_c >= PARAM_FIRST_SCALAR) THEN

           chem_species_bdy_loop_1 : DO ic = PARAM_FIRST_SCALAR , num_3d_c

             CALL set_physical_bc3d( chem(ims,kms,jms,ic), 'p', config_flags,   &
                                     ids, ide, jds, jde, kds, kde,            &
                                     ims, ime, jms, jme, kms, kme,            &
                                     ips, ipe, jps, jpe, kps, kpe,            &
                                     grid%i_start(ij), grid%i_end(ij),                  &
                                     grid%j_start(ij), grid%j_end(ij),                  &
                                     k_start    , k_end-1                    )

           END DO chem_species_bdy_loop_1

         END IF

         IF (num_tracer >= PARAM_FIRST_SCALAR) THEN

           tracer_species_bdy_loop_1 : DO ic = PARAM_FIRST_SCALAR , num_tracer

             CALL set_physical_bc3d( tracer(ims,kms,jms,ic), 'p', config_flags,   &
                                     ids, ide, jds, jde, kds, kde,            &
                                     ims, ime, jms, jme, kms, kme,            &
                                     ips, ipe, jps, jpe, kps, kpe,            &
                                     grid%i_start(ij), grid%i_end(ij),                  &
                                     grid%j_start(ij), grid%j_end(ij),                  &
                                     k_start    , k_end-1                    )

           END DO tracer_species_bdy_loop_1

         END IF

         IF (num_3d_s >= PARAM_FIRST_SCALAR) THEN

           scalar_species_bdy_loop_1 : DO is = PARAM_FIRST_SCALAR , num_3d_s

             CALL set_physical_bc3d( scalar(ims,kms,jms,is), 'p', config_flags,   &
                                     ids, ide, jds, jde, kds, kde,            &
                                     ims, ime, jms, jme, kms, kme,            &
                                     ips, ipe, jps, jpe, kps, kpe,            &
                                     grid%i_start(ij), grid%i_end(ij),                  &
                                     grid%j_start(ij), grid%j_end(ij),                  &
                                     k_start    , k_end-1                    )

           END DO scalar_species_bdy_loop_1

         END IF

         IF (config_flags%km_opt .eq. 2) THEN

           CALL set_physical_bc3d( grid%tke_2 , 'p', config_flags,  &
                                   ids, ide, jds, jde, kds, kde,            &
                                   ims, ime, jms, jme, kms, kme,            &
                                   ips, ipe, jps, jpe, kps, kpe,            &
                                   grid%i_start(ij), grid%i_end(ij),        &
                                   grid%j_start(ij), grid%j_end(ij),        &
                                   k_start    , k_end                      )
         END IF

       END DO tile_bc_loop_1
       !$OMP END PARALLEL DO
BENCH_END(bc_end_tim)


#ifdef DM_PARALLEL

!                           * * * * *
!         *        * * *    * * * * *
!       * + *      * + *    * * + * *
!         *        * * *    * * * * *
!                           * * * * *

! moist, chem, scalar, tke      x


       IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
         IF ( (config_flags%tke_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#         include "HALO_EM_TKE_5.inc"
         ELSE
#         include "HALO_EM_TKE_3.inc"
         ENDIF
       ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
         IF ( (config_flags%tke_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#         include "HALO_EM_TKE_7.inc"
         ELSE
#         include "HALO_EM_TKE_5.inc"
         ENDIF
       ELSE
         WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
         CALL wrf_error_fatal(TRIM(wrf_err_message))
       ENDIF

       IF ( num_moist .GE. PARAM_FIRST_SCALAR ) THEN
         IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
           IF ( (config_flags%moist_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_MOIST_E_5.inc"
           ELSE
#        include "HALO_EM_MOIST_E_3.inc"
           END IF
         ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
           IF ( (config_flags%moist_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_MOIST_E_7.inc"
           ELSE
#        include "HALO_EM_MOIST_E_5.inc"
           END IF
         ELSE
           WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
           CALL wrf_error_fatal(TRIM(wrf_err_message))
         ENDIF
       ENDIF
       IF ( num_chem >= PARAM_FIRST_SCALAR ) THEN
         IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
           IF ( (config_flags%chem_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_CHEM_E_5.inc"
           ELSE
#        include "HALO_EM_CHEM_E_3.inc"
           ENDIF
         ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
           IF ( (config_flags%chem_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_CHEM_E_7.inc"
           ELSE
#        include "HALO_EM_CHEM_E_5.inc"
           ENDIF
         ELSE
           WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
           CALL wrf_error_fatal(TRIM(wrf_err_message))
         ENDIF
       ENDIF
       IF ( num_tracer >= PARAM_FIRST_SCALAR ) THEN
         IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
           IF ( (config_flags%tracer_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_TRACER_E_5.inc"
           ELSE
#        include "HALO_EM_TRACER_E_3.inc"
           ENDIF
         ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
           IF ( (config_flags%tracer_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_TRACER_E_7.inc"
           ELSE
#        include "HALO_EM_TRACER_E_5.inc"
           ENDIF
         ELSE
           WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
           CALL wrf_error_fatal(TRIM(wrf_err_message))
         ENDIF
       ENDIF
       IF ( num_scalar >= PARAM_FIRST_SCALAR ) THEN
         IF      ( config_flags%h_sca_adv_order <= 4 ) THEN
           IF ( (config_flags%scalar_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_SCALAR_E_5.inc"
           ELSE
#        include "HALO_EM_SCALAR_E_3.inc"
           ENDIF
         ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
           IF ( (config_flags%scalar_adv_opt /= ORIGINAL) .and. (rk_step == rk_order-1) ) THEN
#        include "HALO_EM_SCALAR_E_7.inc"
           ELSE
#        include "HALO_EM_SCALAR_E_5.inc"
           ENDIF
         ELSE
           WRITE(wrf_err_message,*)'solve_em: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
           CALL wrf_error_fatal(TRIM(wrf_err_message))
         ENDIF
       ENDIF
#endif

     ENDIF rk_step_1_check


!**********************************************************
!
!  end of RK predictor-corrector loop
!
!**********************************************************

   END DO Runge_Kutta_loop
#ifdef LMDZ1
         WRITE(message, *)'  dyn_em: after runge_kutta_loop' 
         CALL wrf_debug(200, message)
         WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
           ' u_tend: ', ru_tendf(im2,1,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
           'p sfc: ',p8w(im2,kms,jm2)
         CALL wrf_debug(200, message)
         WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
         CALL wrf_debug(200, message)
#endif

   IF (config_flags%do_avgflx_em .EQ. 1) THEN
! Reinitialize time-averaged fluxes if history output was written after the previous time step:
      CALL WRFU_ALARMGET(grid%alarms( HISTORY_ALARM ),prevringtime=temp_time)
      CALL domain_clock_get ( grid, current_time=CurrTime, &
           current_timestr=message2 )
! use overloaded -, .LT. operator to check whether to initialize avgflx:
! reinitialize after each history output (detect this here by comparing current time
! against last history time and time step - this code follows what's done in adapt_timestep_em):
      WRITE ( message , FMT = '("solve_em: old_dt =",g15.6,", dt=",g15.6," on domain ",I3)' ) &
           & old_dt,grid%dt,grid%id
      CALL wrf_debug(200,message)
      old_dt=min(old_dt,grid%dt)
      num = INT(old_dt * precision)
      den = precision
      CALL WRFU_TimeIntervalSet(dtInterval, Sn=num, Sd=den)
      IF (CurrTime .lt. temp_time + dtInterval) THEN
         WRITE ( message , FMT = '("solve_em: initializing avgflx at time ",A," on domain ",I3)' ) &
              & TRIM(message2), grid%id
         CALL wrf_message(trim(message)) 
         grid%avgflx_count = 0
!tile-loop for zero_avgflx
   !$OMP PARALLEL DO   &
   !$OMP PRIVATE ( ij )

         DO ij = 1 , grid%num_tiles
            CALL wrf_debug(200,'In solve_em, before zero_avgflx call')
            CALL zero_avgflx(grid%avgflx_rum,grid%avgflx_rvm,grid%avgflx_wwm, &
                 &   ids, ide, jds, jde, kds, kde,           &
                 &   ims, ime, jms, jme, kms, kme,           &
                 &   grid%i_start(ij), grid%i_end(ij), grid%j_start(ij), grid%j_end(ij), &
                 &   k_start    , k_end, f_flux, &
                 &   grid%avgflx_cfu1,grid%avgflx_cfd1,grid%avgflx_dfu1, &
                 &   grid%avgflx_efu1,grid%avgflx_dfd1,grid%avgflx_efd1 )
            CALL wrf_debug(200,'In solve_em, after zero_avgflx call')
         ENDDO
      ENDIF

! Update avgflx quantities
!tile-loop for upd_avgflx
   !$OMP PARALLEL DO   &
   !$OMP PRIVATE ( ij )

      DO ij = 1 , grid%num_tiles
         CALL wrf_debug(200,'In solve_em, before upd_avgflx call')
         CALL upd_avgflx(grid%avgflx_count,grid%avgflx_rum,grid%avgflx_rvm,grid%avgflx_wwm, &
              &   grid%ru_m, grid%rv_m, grid%ww_m, &
              &   ids, ide, jds, jde, kds, kde,           &
              &   ims, ime, jms, jme, kms, kme,           &
              &   grid%i_start(ij), grid%i_end(ij), grid%j_start(ij), grid%j_end(ij), &
              &   k_start    , k_end, f_flux, &
              &   grid%cfu1,grid%cfd1,grid%dfu1,grid%efu1,grid%dfd1,grid%efd1,          &
              &   grid%avgflx_cfu1,grid%avgflx_cfd1,grid%avgflx_dfu1, &
              &   grid%avgflx_efu1,grid%avgflx_dfd1,grid%avgflx_efd1 )
         CALL wrf_debug(200,'In solve_em, after upd_avgflx call')
         
      ENDDO
      grid%avgflx_count = grid%avgflx_count + 1
   ENDIF
!
   !$OMP PARALLEL DO   &
   !$OMP PRIVATE ( ij )
   DO ij = 1 , grid%num_tiles

BENCH_START(advance_ppt_tim)
     CALL wrf_debug ( 200 , ' call advance_ppt' )
     CALL advance_ppt(grid%rthcuten,grid%rqvcuten,grid%rqccuten,grid%rqrcuten, &
                      grid%rqicuten,grid%rqscuten,           &
                      grid%rainc,grid%raincv,grid%rainsh,grid%pratec,grid%pratesh, &
                      grid%nca,grid%htop,grid%hbot,grid%cutop,grid%cubot,  &
                      grid%cuppt, grid%dt, config_flags,                   &
                      ids,ide, jds,jde, kds,kde,             &
                      ims,ime, jms,jme, kms,kme,             &
                      grid%i_start(ij), grid%i_end(ij),      &
                      grid%j_start(ij), grid%j_end(ij),      &
                      k_start    , k_end                    )
BENCH_END(advance_ppt_tim)

   ENDDO
  !$OMP END PARALLEL DO

!
!
! (5) time-split physics.
!
!     Microphysics are the only time  split physics in the WRF model 
!     at this time.  Split-physics begins with the calculation of
!     needed diagnostic quantities (pressure, temperature, etc.)
!     followed by a call to the microphysics driver, 
!     and finishes with a clean-up, storing off of a diabatic tendency
!     from the moist physics, and a re-calulation of the  diagnostic
!     quantities pressure and density.
!

!

   IF( config_flags%specified .or. config_flags%nested ) THEN
     sz = grid%spec_zone
   ELSE
     sz = 0
   ENDIF

#ifdef LMDZ
!!L. Fita, January 2105, LMD. We have mp_physics == 0, thus, WRF is not doing
!  this...
   PRINT *,'  Lluis: num_3d_m: ',num_3d_m,' PARAM_FIRST_SCALAR: ',        &
     PARAM_FIRST_SCALAR,' p_qv: ',p_qv,' p_qc: ',p_qc,' p_qr: ',p_qr,     &
     ' p_qi: ',p_qi,' p_qs: ',p_qs,' p_qg: ',p_qg, ' p_qh: ',p_qh
   IF (config_flags%mp_physics >= 0)  then
#else
   IF (config_flags%mp_physics /= 0)  then
#endif
     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij, its, ite, jts, jte )

     scalar_tile_loop_1a: DO ij = 1 , grid%num_tiles

       IF ( config_flags%periodic_x ) THEN
         its = max(grid%i_start(ij),ids)
         ite = min(grid%i_end(ij),ide-1)
       ELSE
         its = max(grid%i_start(ij),ids+sz)
         ite = min(grid%i_end(ij),ide-1-sz)
       ENDIF
       jts = max(grid%j_start(ij),jds+sz)
       jte = min(grid%j_end(ij),jde-1-sz)

       CALL wrf_debug ( 200 , ' call moist_physics_prep' )
BENCH_START(moist_physics_prep_tim)
       CALL moist_physics_prep_em( grid%t_2, grid%t_1, t0, rho,                &
                                   grid%al, grid%alb, grid%p, p8w, p0, grid%pb,          &
                                   grid%ph_2, grid%phb, th_phy, pi_phy, p_phy, &
                                   grid%z, grid%z_at_w, dz8w,                  &
                                   dtm, grid%h_diabatic,                  &
                                   config_flags,grid%fnm, grid%fnp,            &
                                   ids, ide, jds, jde, kds, kde,     &
                                   ims, ime, jms, jme, kms, kme,     &
                                   its, ite, jts, jte,               &
                                   k_start    , k_end               )
BENCH_END(moist_physics_prep_tim)
     END DO scalar_tile_loop_1a
     !$OMP END PARALLEL DO

     CALL wrf_debug ( 200 , ' call microphysics_driver' )

     grid%sr = 0.
     specified_bdy = config_flags%specified .OR. config_flags%nested
     channel_bdy = config_flags%specified .AND. config_flags%periodic_x

BENCH_START(micro_driver_tim)

#ifdef LMDZ
! L. Fita, LMD February 2015. No moisture mircophysics!!
! No microphyics_driver
#else
     CALL microphysics_driver(                                            &
      &         DT=dtm             ,DX=grid%dx              ,DY=grid%dy   &
      &        ,DZ8W=dz8w          ,F_ICE_PHY=grid%f_ice_phy              &
      &        ,ITIMESTEP=grid%itimestep                    ,LOWLYR=grid%lowlyr  &
      &        ,P8W=p8w            ,P=p_phy            ,PI_PHY=pi_phy     &
      &        ,RHO=rho            ,SPEC_ZONE=grid%spec_zone              &
      &        ,SR=grid%sr              ,TH=th_phy                        &
      &        ,refl_10cm=grid%refl_10cm                                  & ! hm, 9/22/09 for refl
      &        ,WARM_RAIN=grid%warm_rain                                  &
      &        ,T8W=t8w                                                   &
      &        ,CLDFRA=grid%cldfra, EXCH_H=grid%exch_h &
      &        ,NSOURCE=grid%qndropsource                                 &
#ifdef WRF_CHEM
      &        ,QLSINK=grid%qlsink,CLDFRA_OLD=grid%cldfra_old             &
      &        ,PRECR=grid%precr, PRECI=grid%preci, PRECS=grid%precs, PRECG=grid%precg &
      &        ,CHEM_OPT=config_flags%chem_opt, PROGN=config_flags%progn  &
#endif
      &        ,XLAND=grid%xland                                          &
      &        ,SPECIFIED=specified_bdy, CHANNEL_SWITCH=channel_bdy       &
      &        ,F_RAIN_PHY=grid%f_rain_phy                                &
      &        ,F_RIMEF_PHY=grid%f_rimef_phy                              &
      &        ,MP_PHYSICS=config_flags%mp_physics                        &
      &        ,ID=grid%id                                                &
      &        ,IDS=ids,IDE=ide, JDS=jds,JDE=jde, KDS=kds,KDE=kde         &
      &        ,IMS=ims,IME=ime, JMS=jms,JME=jme, KMS=kms,KME=kme         &
#ifdef RUN_ON_GPU
      &        ,IPS=ips,IPE=ipe, JPS=jps,JPE=jpe, KPS=kps,KPE=kpe         &
#endif
      &        ,I_START=grid%i_start,I_END=min(grid%i_end, ide-1)         &
      &        ,J_START=grid%j_start,J_END=min(grid%j_end, jde-1)         &
      &        ,KTS=k_start, KTE=min(k_end,kde-1)                         &
      &        ,NUM_TILES=grid%num_tiles                                  &
      &        ,NAER=grid%naer                                            &
                 ! Optional
      &        , RAINNC=grid%rainnc, RAINNCV=grid%rainncv                 &
      &        , SNOWNC=grid%snownc, SNOWNCV=grid%snowncv                 &
      &        , GRAUPELNC=grid%graupelnc, GRAUPELNCV=grid%graupelncv     & ! for milbrandt2mom
      &        , HAILNC=grid%hailnc, HAILNCV=grid%hailncv                 &
      &        , W=grid%w_2, Z=grid%z, HT=grid%ht                         &
      &        , MP_RESTART_STATE=grid%mp_restart_state                   &
      &        , TBPVS_STATE=grid%tbpvs_state                             & ! etampnew
      &        , TBPVS0_STATE=grid%tbpvs0_state                           & ! etampnew
      &        , QV_CURR=moist(ims,kms,jms,P_QV), F_QV=F_QV               &
      &        , QC_CURR=moist(ims,kms,jms,P_QC), F_QC=F_QC               &
      &        , QR_CURR=moist(ims,kms,jms,P_QR), F_QR=F_QR               &
      &        , QI_CURR=moist(ims,kms,jms,P_QI), F_QI=F_QI               &
      &        , QS_CURR=moist(ims,kms,jms,P_QS), F_QS=F_QS               &
      &        , QG_CURR=moist(ims,kms,jms,P_QG), F_QG=F_QG               &
      &        , QH_CURR=moist(ims,kms,jms,P_QH), F_QH=F_QH               & ! for milbrandt2mom
      &        , QNDROP_CURR=scalar(ims,kms,jms,P_QNDROP), F_QNDROP=F_QNDROP &
      &        , QT_CURR=scalar(ims,kms,jms,P_QT), F_QT=F_QT              &
      &        , QNN_CURR=scalar(ims,kms,jms,P_QNN), F_QNN=F_QNN          &
      &        , QNI_CURR=scalar(ims,kms,jms,P_QNI), F_QNI=F_QNI          &
      &        , QNC_CURR=scalar(ims,kms,jms,P_QNC), F_QNC=F_QNC          &
      &        , QNR_CURR=scalar(ims,kms,jms,P_QNR), F_QNR=F_QNR          &
      &        , QNS_CURR=scalar(ims,kms,jms,P_QNS), F_QNS=F_QNS          &
      &        , QNG_CURR=scalar(ims,kms,jms,P_QNG), F_QNG=F_QNG          &
      &        , QNH_CURR=scalar(ims,kms,jms,P_QNH), F_QNH=F_QNH          & ! for milbrandt2mom
!       &        , QZR_CURR=scalar(ims,kms,jms,P_QZR), F_QZR=F_QZR          & ! for milbrandt3mom
!       &        , QZI_CURR=scalar(ims,kms,jms,P_QZI), F_QZI=F_QZI          & ! "
!       &        , QZS_CURR=scalar(ims,kms,jms,P_QZS), F_QZS=F_QZS          & ! "
!       &        , QZG_CURR=scalar(ims,kms,jms,P_QZG), F_QZG=F_QZG          & ! "
!       &        , QZH_CURR=scalar(ims,kms,jms,P_QZH), F_QZH=F_QZH          & ! "
      &        , qrcuten=grid%rqrcuten, qscuten=grid%rqscuten             &
      &        , qicuten=grid%rqicuten,mu=grid%mut                        &
      &        , HAIL=config_flags%gsfcgce_hail                           & ! for gsfcgce
      &        , ICE2=config_flags%gsfcgce_2ice                           & ! for gsfcgce
!     &        , ccntype=config_flags%milbrandt_ccntype                   & ! for milbrandt (2mom)
! YLIN
! RI_CURR INPUT
      &        , RI_CURR=grid%rimi                                          &
                                                                          )
#endif
BENCH_END(micro_driver_tim)

#ifdef LMDZ
!  grid%h_diabatic = 0.
#endif

#if 0
BENCH_START(microswap_2)
! for load balancing; communication to redistribute the points
     IF ( config_flags%mp_physics .EQ. ETAMPNEW ) THEN
#include "SWAP_ETAMP_NEW.inc"
     ELSE IF ( config_flags%mp_physics .EQ. WSM3SCHEME ) THEN
#include "SWAP_WSM3.inc"
     ENDIF
BENCH_END(microswap_2)
#endif

     CALL wrf_debug ( 200 , ' call moist_physics_finish' )
BENCH_START(moist_phys_end_tim)

     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij, its, ite, jts, jte, im, ii, jj, kk )

     DO ij = 1 , grid%num_tiles

       its = max(grid%i_start(ij),ids)
       ite = min(grid%i_end(ij),ide-1)
       jts = max(grid%j_start(ij),jds)
       jte = min(grid%j_end(ij),jde-1)

       CALL microphysics_zero_outb (                                    &
                      moist , num_moist , config_flags ,                &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )

       CALL microphysics_zero_outb (                                    &
                      scalar , num_scalar , config_flags ,              &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )

       CALL microphysics_zero_outb (                                    &
                      chem , num_chem , config_flags ,              &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )
       CALL microphysics_zero_outb (                                    &
                      tracer , num_tracer , config_flags ,              &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )

       IF ( config_flags%periodic_x ) THEN
         its = max(grid%i_start(ij),ids)
         ite = min(grid%i_end(ij),ide-1)
       ELSE
         its = max(grid%i_start(ij),ids+sz)
         ite = min(grid%i_end(ij),ide-1-sz)
       ENDIF
       jts = max(grid%j_start(ij),jds+sz)
       jte = min(grid%j_end(ij),jde-1-sz)

       CALL microphysics_zero_outa (                                    &
                      moist , num_moist , config_flags ,                &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )

       CALL microphysics_zero_outa (                                    &
                      scalar , num_scalar , config_flags ,              &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )

       CALL microphysics_zero_outa (                                    &
                      chem , num_chem , config_flags ,                  &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )

       CALL microphysics_zero_outa (                                    &
                      tracer , num_tracer , config_flags ,              &
                      ids, ide, jds, jde, kds, kde,                     &
                      ims, ime, jms, jme, kms, kme,                     &
                      its, ite, jts, jte,                               &
                      k_start    , k_end                                )

       CALL moist_physics_finish_em( grid%t_2, grid%t_1, t0, grid%muts, th_phy,       &
                                      grid%h_diabatic, dtm, config_flags,    &
#if ( WRF_DFI_RADAR == 1 )
                                      grid%dfi_tten_rad,grid%dfi_stage,        &
#endif
                                      ids, ide, jds, jde, kds, kde,     &
                                      ims, ime, jms, jme, kms, kme,     &
                                      its, ite, jts, jte,               &
                                      k_start    , k_end               )

     END DO
     !$OMP END PARALLEL DO

   ENDIF  ! microphysics test

!-----------------------------------------------------------
!  filter for moist variables post-microphysics and end of timestep
!-----------------------------------------------------------

   IF (config_flags%polar) THEN
     IF ( num_3d_m >= PARAM_FIRST_SCALAR ) THEN
       CALL wrf_debug ( 200 , ' call filter moist' )
       DO im = PARAM_FIRST_SCALAR, num_3d_m
         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               moist(ii,kk,jj,im)=moist(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO
 
         CALL pxft ( grid=grid                                                 &
                  ,lineno=__LINE__                                             &
                  ,flag_uv            = 0                                      &
                  ,flag_rurv          = 0                                      &
                  ,flag_wph           = 0                                      &
                  ,flag_ww            = 0                                      &
                  ,flag_t             = 0                                      &
                  ,flag_mu            = 0                                      &
                  ,flag_mut           = 0                                      &
                  ,flag_moist         = im                                     &
                  ,flag_chem          = 0                                      &
                  ,flag_tracer        = 0                                      &
                  ,flag_scalar        = 0                                      &
                  ,positive_definite=.FALSE.                                   &
                  ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                  ,fft_filter_lat = config_flags%fft_filter_lat                &
                  ,dclat = dclat                                               &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                  ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                  ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
 
         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               moist(ii,kk,jj,im)=moist(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO
       ENDDO
     ENDIF
   ENDIF

!-----------------------------------------------------------
!  end filter for moist variables post-microphysics and end of timestep
!-----------------------------------------------------------

   !$OMP PARALLEL DO   &
   !$OMP PRIVATE ( ij, its, ite, jts, jte, im, ii, jj, kk )
   scalar_tile_loop_1ba: DO ij = 1 , grid%num_tiles

     IF ( config_flags%periodic_x ) THEN
       its = max(grid%i_start(ij),ids)
       ite = min(grid%i_end(ij),ide-1)
     ELSE
       its = max(grid%i_start(ij),ids+sz)
       ite = min(grid%i_end(ij),ide-1-sz)
     ENDIF
     jts = max(grid%j_start(ij),jds+sz)
     jte = min(grid%j_end(ij),jde-1-sz)

     CALL calc_p_rho_phi( moist, num_3d_m,                &
                          grid%al, grid%alb, grid%mu_2, grid%muts,              &
                          grid%ph_2, grid%p, grid%pb, grid%t_2,                 &
                          p0, t0, grid%znu, grid%dnw, grid%rdnw,           &
                          grid%rdn, config_flags%non_hydrostatic,             &
                          ids, ide, jds, jde, kds, kde,     &
                          ims, ime, jms, jme, kms, kme,     &
                          its, ite, jts, jte,               &
                          k_start    , k_end               )

   END DO scalar_tile_loop_1ba
   !$OMP END PARALLEL DO
BENCH_END(moist_phys_end_tim)

   IF (.not. config_flags%non_hydrostatic) THEN
#ifdef DM_PARALLEL
#    include "HALO_EM_HYDRO_UV.inc"
#    include "PERIOD_EM_HYDRO_UV.inc"
#endif
     !$OMP PARALLEL DO   &
     !$OMP PRIVATE ( ij )
     DO ij = 1 , grid%num_tiles
       CALL diagnose_w( ph_tend, grid%ph_2, grid%ph_1, grid%w_2, grid%muts, dt_rk,  &
                       grid%u_2, grid%v_2, grid%ht,                           &
                       grid%cf1, grid%cf2, grid%cf3, grid%rdx, grid%rdy, grid%msftx, grid%msfty, &
                       ids, ide, jds, jde, kds, kde,           &
                       ims, ime, jms, jme, kms, kme,           &
                       grid%i_start(ij), grid%i_end(ij),       &
                       grid%j_start(ij), grid%j_end(ij),       &
                       k_start    , k_end                     )

     END DO
     !$OMP END PARALLEL DO

   END IF

   CALL wrf_debug ( 200 , ' call chem polar filter ' )

!-----------------------------------------------------------
!  filter for chem and scalar variables at end of timestep
!-----------------------------------------------------------

   IF (config_flags%polar) THEN

     IF ( num_3d_c >= PARAM_FIRST_SCALAR ) then
       chem_filter_loop: DO im = PARAM_FIRST_SCALAR, num_3d_c
         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               chem(ii,kk,jj,im)=chem(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO

         CALL pxft ( grid=grid                                                 &
                  ,lineno=__LINE__                                             &
                  ,flag_uv            = 0                                      &
                  ,flag_rurv          = 0                                      &
                  ,flag_wph           = 0                                      &
                  ,flag_ww            = 0                                      &
                  ,flag_t             = 0                                      &
                  ,flag_mu            = 0                                      &
                  ,flag_mut           = 0                                      &
                  ,flag_moist         = 0                                      &
                  ,flag_chem          = im                                     &
                  ,flag_tracer        = 0                                      &
                  ,flag_scalar        = 0                                      &
                  ,positive_definite=.FALSE.                                   &
                  ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                  ,fft_filter_lat = config_flags%fft_filter_lat                &
                  ,dclat = dclat                                               &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                  ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                  ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )

         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               chem(ii,kk,jj,im)=chem(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO
       ENDDO chem_filter_loop
     ENDIF
     IF ( num_tracer >= PARAM_FIRST_SCALAR ) then
       tracer_filter_loop: DO im = PARAM_FIRST_SCALAR, num_tracer
         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               tracer(ii,kk,jj,im)=tracer(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO

         CALL pxft ( grid=grid                                                 &
                  ,lineno=__LINE__                                             &
                  ,flag_uv            = 0                                      &
                  ,flag_rurv          = 0                                      &
                  ,flag_wph           = 0                                      &
                  ,flag_ww            = 0                                      &
                  ,flag_t             = 0                                      &
                  ,flag_mu            = 0                                      &
                  ,flag_mut           = 0                                      &
                  ,flag_moist         = 0                                      &
                  ,flag_chem          = 0                                      &
                  ,flag_tracer        = im                                    &
                  ,flag_scalar        = 0                                      &
                  ,positive_definite=.FALSE.                                   &
                  ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                  ,fft_filter_lat = config_flags%fft_filter_lat                &
                  ,dclat = dclat                                               &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                  ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                  ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )

         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               tracer(ii,kk,jj,im)=tracer(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO
       ENDDO tracer_filter_loop
     ENDIF

     IF ( num_3d_s >= PARAM_FIRST_SCALAR ) then
       scalar_filter_loop: DO im = PARAM_FIRST_SCALAR, num_3d_s
         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               scalar(ii,kk,jj,im)=scalar(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO

         CALL pxft ( grid=grid                                                 &
                  ,lineno=__LINE__                                             &
                  ,flag_uv            = 0                                      &
                  ,flag_rurv          = 0                                      &
                  ,flag_wph           = 0                                      &
                  ,flag_ww            = 0                                      &
                  ,flag_t             = 0                                      &
                  ,flag_mu            = 0                                      &
                  ,flag_mut           = 0                                      &
                  ,flag_moist         = 0                                      &
                  ,flag_chem          = 0                                      &
                  ,flag_tracer        = 0                                      &
                  ,flag_scalar        = im                                     &
                  ,positive_definite=.FALSE.                                   &
                  ,moist=moist,chem=chem,tracer=tracer,scalar=scalar           &
                  ,fft_filter_lat = config_flags%fft_filter_lat                &
                  ,dclat = dclat                                               &
                  ,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde             &
                  ,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme             &
                  ,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe             &
                  ,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
                  ,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )

         DO jj = jps, MIN(jpe,jde-1)
           DO kk = kps, MIN(kpe,kde-1)
             DO ii = ips, MIN(ipe,ide-1)
               scalar(ii,kk,jj,im)=scalar(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
             ENDDO
           ENDDO
         ENDDO
       ENDDO scalar_filter_loop
     ENDIF
   ENDIF

!-----------------------------------------------------------
!  end filter for chem and scalar variables at end of timestep
!-----------------------------------------------------------

   !  We're finished except for boundary condition (and patch) update

   ! Boundary condition time (or communication time).  At this time, we have
   ! implemented periodic and symmetric physical boundary conditions.

   ! b.c. routine for data within patch.

   ! we need to do both time levels of 
   ! data because the time filter only works in the physical solution space.

   ! First, do patch communications for boundary conditions (periodicity)

!-----------------------------------------------------------
!  Stencils for patch communications  (WCS, 29 June 2001)
!
!  here's where we need a wide comm stencil - these are the 
!  uncoupled variables so are used for high order calc in
!  advection and mixong routines.
!
!                              * * * * *
!            *        * * *    * * * * *
!          * + *      * + *    * * + * * 
!            *        * * *    * * * * *
!                              * * * * *
!
!   grid%u_1                            x
!   grid%u_2                            x
!   grid%v_1                            x
!   grid%v_2                            x
!   grid%w_1                            x
!   grid%w_2                            x
!   grid%t_1                            x
!   grid%t_2                            x
!  grid%ph_1                            x
!  grid%ph_2                            x
!  grid%tke_1                           x
!  grid%tke_2                           x
!
!    2D variables
!  grid%mu_1     x
!  grid%mu_2     x
!
!    4D variables
!  moist                         x
!   chem                         x
! scalar                         x
!----------------------------------------------------------


#ifdef DM_PARALLEL
   IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#    include "HALO_EM_D3_3.inc"
   ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#    include "HALO_EM_D3_5.inc"
   ELSE 
      WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
      CALL wrf_error_fatal(TRIM(wrf_err_message))
   ENDIF
#  include "PERIOD_BDY_EM_D3.inc"
#  include "PERIOD_BDY_EM_MOIST.inc"
#  include "PERIOD_BDY_EM_CHEM.inc"
#  include "PERIOD_BDY_EM_TRACER.inc"
#  include "PERIOD_BDY_EM_SCALAR.inc"
#endif

!  now set physical b.c on a patch

BENCH_START(bc_2d_tim)
   !$OMP PARALLEL DO   &
   !$OMP PRIVATE ( ij )
   tile_bc_loop_2: DO ij = 1 , grid%num_tiles

     CALL wrf_debug ( 200 , ' call set_phys_bc_dry_2' )

     CALL set_phys_bc_dry_2( config_flags,                           &
                             grid%u_1, grid%u_2, grid%v_1, grid%v_2, grid%w_1, grid%w_2,           &
                             grid%t_1, grid%t_2, grid%ph_1, grid%ph_2, grid%mu_1, grid%mu_2,       &
                             ids, ide, jds, jde, kds, kde,           &
                             ims, ime, jms, jme, kms, kme,           &
                             ips, ipe, jps, jpe, kps, kpe,           &
                             grid%i_start(ij), grid%i_end(ij),       &
                             grid%j_start(ij), grid%j_end(ij),       &
                             k_start    , k_end                     )

     CALL set_physical_bc3d( grid%tke_1, 'p', config_flags,   &
                             ids, ide, jds, jde, kds, kde,            &
                             ims, ime, jms, jme, kms, kme,            &
                             ips, ipe, jps, jpe, kps, kpe,            &
                             grid%i_start(ij), grid%i_end(ij),        &
                             grid%j_start(ij), grid%j_end(ij),        &
                             k_start    , k_end-1                    )

     CALL set_physical_bc3d( grid%tke_2 , 'p', config_flags,  &
                             ids, ide, jds, jde, kds, kde,            &
                             ims, ime, jms, jme, kms, kme,            &
                             ips, ipe, jps, jpe, kps, kpe,            &
                             grid%i_start(ij), grid%i_end(ij),        &
                             grid%j_start(ij), grid%j_end(ij),        &
                             k_start    , k_end                      )

     moisture_loop_bdy_2 : DO im = PARAM_FIRST_SCALAR , num_3d_m

       CALL set_physical_bc3d( moist(ims,kms,jms,im), 'p',           &
                               config_flags,                           &
                               ids, ide, jds, jde, kds, kde,           &
                               ims, ime, jms, jme, kms, kme,           &
                               ips, ipe, jps, jpe, kps, kpe,           &
                               grid%i_start(ij), grid%i_end(ij),       &
                               grid%j_start(ij), grid%j_end(ij),       &
                               k_start    , k_end                     )

     END DO moisture_loop_bdy_2

     chem_species_bdy_loop_2 : DO ic = PARAM_FIRST_SCALAR , num_3d_c

       CALL set_physical_bc3d( chem(ims,kms,jms,ic) , 'p', config_flags,  &
                               ids, ide, jds, jde, kds, kde,            &
                               ims, ime, jms, jme, kms, kme,            &
                               ips, ipe, jps, jpe, kps, kpe,            &
                               grid%i_start(ij), grid%i_end(ij),                  &
                               grid%j_start(ij), grid%j_end(ij),                  &
                               k_start    , k_end                      )

     END DO chem_species_bdy_loop_2

     tracer_species_bdy_loop_2 : DO ic = PARAM_FIRST_SCALAR , num_tracer

       CALL set_physical_bc3d( tracer(ims,kms,jms,ic) , 'p', config_flags,  &
                               ids, ide, jds, jde, kds, kde,            &
                               ims, ime, jms, jme, kms, kme,            &
                               ips, ipe, jps, jpe, kps, kpe,            &
                               grid%i_start(ij), grid%i_end(ij),                  &
                               grid%j_start(ij), grid%j_end(ij),                  &
                               k_start    , k_end                      )

     END DO tracer_species_bdy_loop_2

     scalar_species_bdy_loop_2 : DO is = PARAM_FIRST_SCALAR , num_3d_s

       CALL set_physical_bc3d( scalar(ims,kms,jms,is) , 'p', config_flags,  &
                               ids, ide, jds, jde, kds, kde,            &
                               ims, ime, jms, jme, kms, kme,            &
                               ips, ipe, jps, jpe, kps, kpe,            &
                               grid%i_start(ij), grid%i_end(ij),                  &
                               grid%j_start(ij), grid%j_end(ij),                  &
                               k_start    , k_end                      )

     END DO scalar_species_bdy_loop_2

   END DO tile_bc_loop_2
   !$OMP END PARALLEL DO
BENCH_END(bc_2d_tim)

   IF( config_flags%specified .or. config_flags%nested ) THEN 
     grid%dtbc = grid%dtbc + grid%dt
   ENDIF

! reset surface w for consistency

#ifdef DM_PARALLEL
#  include "HALO_EM_C.inc"
#  include "PERIOD_BDY_EM_E.inc"
#endif

   CALL wrf_debug ( 10 , ' call set_w_surface' )
   fill_w_flag = .false.

   !$OMP PARALLEL DO   &
   !$OMP PRIVATE ( ij )
   DO ij = 1 , grid%num_tiles
      CALL set_w_surface( config_flags, grid%znw, fill_w_flag,              &
                           grid%w_2, grid%ht,  grid%u_2, grid%v_2,          &
                           grid%cf1, grid%cf2, grid%cf3, grid%rdx, grid%rdy,&
                           grid%msftx, grid%msfty,                          &
                           ids, ide, jds, jde, kds, kde,                    &
                           ims, ime, jms, jme, kms, kme,                    &
                           grid%i_start(ij), grid%i_end(ij),                &
                           grid%j_start(ij), grid%j_end(ij),                &
                           k_start, k_end                                   )
!                          its, ite, jts, jte, k_start, min(k_end,kde-1),   &

   END DO
   !$OMP END PARALLEL DO

! calculate some model diagnostics.

#ifdef LMDZ1
     WRITE(message, *)'  dyn_em: before diagnostics' 
     CALL wrf_debug(200, message)
     WRITE(message, *)' t_tend: ',t_tendf(im2,km2,jm2),       &
       ' u_tend: ', ru_tendf(im2,1,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' psfc_tend: ',grid%dpsdt(im2,jm2),      &
       'p sfc: ',p8w(im2,kms,jm2)
     CALL wrf_debug(200, message)
     WRITE(message,*)' p 1: ',grid%p(im2,kms,jm2), ' ph 1: ',grid%ph_2(im2,kms,jm2)
     CALL wrf_debug(200, message)
#endif
   CALL wrf_debug ( 200 , ' call diagnostic_driver' )
   
   CALL diagnostic_output_calc(                                            &
      &              DPSDT=grid%dpsdt   ,DMUDT=grid%dmudt                  &
      &             ,P8W=p8w   ,PK1M=grid%pk1m                             &
      &             ,MU_2=grid%mu_2  ,MU_2M=grid%mu_2m                     &
      &             ,U=grid%u_2    ,V=grid%v_2                             &
      &             ,RAINCV=grid%raincv    ,RAINNCV=grid%rainncv           &
      &             ,RAINC=grid%rainc    ,RAINNC=grid%rainnc               &
      &             ,I_RAINC=grid%i_rainc    ,I_RAINNC=grid%i_rainnc       &
      &             ,HFX=grid%hfx   ,SFCEVP=grid%sfcevp    ,LH=grid%lh     &
      &             ,DT=grid%dt      ,SBW=config_flags%spec_bdy_width      &
      &             ,XTIME=grid%xtime   ,T2=grid%t2                        &
      &        ,ACSWUPT=grid%acswupt    ,ACSWUPTC=grid%acswuptc            &
      &        ,ACSWDNT=grid%acswdnt    ,ACSWDNTC=grid%acswdntc            &
      &        ,ACSWUPB=grid%acswupb    ,ACSWUPBC=grid%acswupbc            &
      &        ,ACSWDNB=grid%acswdnb    ,ACSWDNBC=grid%acswdnbc            &
      &        ,ACLWUPT=grid%aclwupt    ,ACLWUPTC=grid%aclwuptc            &
      &        ,ACLWDNT=grid%aclwdnt    ,ACLWDNTC=grid%aclwdntc            &
      &        ,ACLWUPB=grid%aclwupb    ,ACLWUPBC=grid%aclwupbc            &
      &        ,ACLWDNB=grid%aclwdnb    ,ACLWDNBC=grid%aclwdnbc            &
      &      ,I_ACSWUPT=grid%i_acswupt  ,I_ACSWUPTC=grid%i_acswuptc        &
      &      ,I_ACSWDNT=grid%i_acswdnt  ,I_ACSWDNTC=grid%i_acswdntc        &
      &      ,I_ACSWUPB=grid%i_acswupb  ,I_ACSWUPBC=grid%i_acswupbc        &
      &      ,I_ACSWDNB=grid%i_acswdnb  ,I_ACSWDNBC=grid%i_acswdnbc        &
      &      ,I_ACLWUPT=grid%i_aclwupt  ,I_ACLWUPTC=grid%i_aclwuptc        &
      &      ,I_ACLWDNT=grid%i_aclwdnt  ,I_ACLWDNTC=grid%i_aclwdntc        &
      &      ,I_ACLWUPB=grid%i_aclwupb  ,I_ACLWUPBC=grid%i_aclwupbc        &
      &      ,I_ACLWDNB=grid%i_aclwdnb  ,I_ACLWDNBC=grid%i_aclwdnbc        &
                  ! Selection flag
      &             ,DIAG_PRINT=config_flags%diag_print                    &
      &             ,BUCKET_MM=config_flags%bucket_mm                      &
      &             ,BUCKET_J =config_flags%bucket_J                       &
      &             ,SNOWNCV=grid%snowncv, SNOW_ACC_NC=grid%snow_acc_nc    &
      &             ,PREC_ACC_C=grid%prec_acc_c                            &
      &             ,PREC_ACC_NC=grid%prec_acc_nc                          &
      &             ,PREC_ACC_DT=config_flags%prec_acc_dt                  &
      &             ,CURR_SECS=curr_secs                                   &
                  ! Dimension arguments
      &             ,IDS=ids,IDE=ide, JDS=jds,JDE=jde, KDS=kds,KDE=kde     &
      &             ,IMS=ims,IME=ime, JMS=jms,JME=jme, KMS=kms,KME=kme     &
      &             ,IPS=ips,IPE=ipe, JPS=jps,JPE=jpe, KPS=kps,KPE=kpe     &
      &             ,I_START=grid%i_start,I_END=min(grid%i_end, ide-1)     &
      &             ,J_START=grid%j_start,J_END=min(grid%j_end, jde-1)     &
      &             ,KTS=k_start, KTE=min(k_end,kde-1)                     &
      &             ,NUM_TILES=grid%num_tiles                              &
      &                                                          )

#ifdef DM_PARALLEL
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
   CALL wrf_debug ( 200 , ' call HALO_RK_E' )
   IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#    include "HALO_EM_E_3.inc"
   ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#    include "HALO_EM_E_5.inc"
   ELSE
     WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
     CALL wrf_error_fatal(TRIM(wrf_err_message))
   ENDIF
#endif

#ifdef DM_PARALLEL
   IF ( num_moist >= PARAM_FIRST_SCALAR  ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
     CALL wrf_debug ( 200 , ' call HALO_RK_MOIST' )
     IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#      include "HALO_EM_MOIST_E_3.inc"
     ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#      include "HALO_EM_MOIST_E_5.inc"
     ELSE
       WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
       CALL wrf_error_fatal(TRIM(wrf_err_message))
     ENDIF
   ENDIF
   IF ( num_chem >= PARAM_FIRST_SCALAR ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
     CALL wrf_debug ( 200 , ' call HALO_RK_CHEM' )
     IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#      include "HALO_EM_CHEM_E_3.inc"
     ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#      include "HALO_EM_CHEM_E_5.inc"
     ELSE
       WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
       CALL wrf_error_fatal(TRIM(wrf_err_message))
     ENDIF
   ENDIF
   IF ( num_tracer >= PARAM_FIRST_SCALAR ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
     CALL wrf_debug ( 200 , ' call HALO_RK_TRACER' )
     IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#      include "HALO_EM_TRACER_E_3.inc"
     ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#      include "HALO_EM_TRACER_E_5.inc"
     ELSE
       WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
       CALL wrf_error_fatal(TRIM(wrf_err_message))
     ENDIF
   ENDIF
   IF ( num_scalar >= PARAM_FIRST_SCALAR ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
     CALL wrf_debug ( 200 , ' call HALO_RK_SCALAR' )
     IF      ( config_flags%h_mom_adv_order <= 4 ) THEN
#      include "HALO_EM_SCALAR_E_3.inc"
     ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
#      include "HALO_EM_SCALAR_E_5.inc"
     ELSE
       WRITE(wrf_err_message,*)'solve_em: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
       CALL wrf_error_fatal(TRIM(wrf_err_message))
     ENDIF
   ENDIF
#endif

!  Max values of CFL for adaptive time step scheme

   DEALLOCATE(max_vert_cfl_tmp)
   DEALLOCATE(max_horiz_cfl_tmp)

   CALL wrf_debug ( 200 , ' call end of solve_em' )

! Finish timers if compiled with -DBENCH.
#include 

   RETURN

END SUBROUTINE solve_em