!WRF:MODEL_LAYER:PHYSICS ! MODULE module_cu_g3 CONTAINS !------------------------------------------------------------- SUBROUTINE G3DRV( & DT,itimestep,DX & ,rho,RAINCV,PRATEC & ,U,V,t,W,q,p,pi & ,dz8w,p8w,XLV,CP,G,r_v & ,STEPCU,htop,hbot & ,CU_ACT_FLAG,warm_rain & ,APR_GR,APR_W,APR_MC,APR_ST,APR_AS & ,APR_CAPMA,APR_CAPME,APR_CAPMI & ,MASS_FLUX,XF_ENS,PR_ENS,HT,XLAND,gsw,edt_out & ,GDC,GDC2 ,kpbl,k22_shallow,kbcon_shallow & ,ktop_shallow,xmb_shallow & ,cugd_tten,cugd_qvten ,cugd_qcten & ,cugd_ttens,cugd_qvtens,cugd_avedx,imomentum & ,ensdim,maxiens,maxens,maxens2,maxens3,ichoice & ,ishallow_g3,ids,ide, jds,jde, kds,kde & ,ims,ime, jms,jme, kms,kme & ,ips,ipe, jps,jpe, kps,kpe & ,its,ite, jts,jte, kts,kte & ,periodic_x,periodic_y & ,RQVCUTEN,RQCCUTEN,RQICUTEN & ,RQVFTEN,RTHFTEN,RTHCUTEN & ,rqvblten,rthblten & ,F_QV ,F_QC ,F_QR ,F_QI ,F_QS & #if ( WRF_DFI_RADAR == 1 ) ! Optional CAP suppress option ,do_capsuppress,cap_suppress_loc & #endif ) !------------------------------------------------------------- IMPLICIT NONE !------------------------------------------------------------- INTEGER, INTENT(IN ) :: & ids,ide, jds,jde, kds,kde, & ims,ime, jms,jme, kms,kme, & ips,ipe, jps,jpe, kps,kpe, & its,ite, jts,jte, kts,kte LOGICAL periodic_x,periodic_y integer, parameter :: ens4_spread = 3 ! max(3,cugd_avedx) integer, parameter :: ens4=ens4_spread*ens4_spread integer, intent (in ) :: & ensdim,maxiens,maxens,maxens2,maxens3,ichoice INTEGER, INTENT(IN ) :: STEPCU, ITIMESTEP,cugd_avedx, & ishallow_g3,imomentum LOGICAL, INTENT(IN ) :: warm_rain REAL, INTENT(IN ) :: XLV, R_v REAL, INTENT(IN ) :: CP,G REAL, DIMENSION( ims:ime , kms:kme , jms:jme ) , & INTENT(IN ) :: & U, & V, & W, & pi, & t, & q, & p, & dz8w, & p8w, & rho REAL, DIMENSION( ims:ime , kms:kme , jms:jme ) , & OPTIONAL , & INTENT(INOUT ) :: & GDC,GDC2 REAL, DIMENSION( ims:ime , jms:jme ),INTENT(IN) :: GSW,HT,XLAND INTEGER, DIMENSION( ims:ime , jms:jme ),INTENT(IN) :: KPBL INTEGER, DIMENSION( ims:ime , jms:jme ),INTENT(INOUT) :: k22_shallow, & kbcon_shallow,ktop_shallow ! REAL, INTENT(IN ) :: DT, DX ! REAL, DIMENSION( ims:ime , jms:jme ), & INTENT(INOUT) :: pratec,RAINCV, MASS_FLUX, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & edt_out,APR_CAPMA,APR_CAPME,APR_CAPMI, & htop,hbot,xmb_shallow !+lxz ! REAL, DIMENSION( ims:ime , jms:jme ) :: & !, INTENT(INOUT) :: & ! HTOP, &! highest model layer penetrated by cumulus since last reset in radiation_driver ! HBOT ! lowest model layer penetrated by cumulus since last reset in radiation_driver ! ! HBOT>HTOP follow physics leveling convention LOGICAL, DIMENSION( ims:ime , jms:jme ), & INTENT(INOUT) :: CU_ACT_FLAG ! ! Optionals ! REAL, DIMENSION( ims:ime , kms:kme , jms:jme ), & OPTIONAL, & INTENT(INOUT) :: RTHFTEN, & cugd_tten,cugd_qvten,cugd_qcten, & cugd_ttens,cugd_qvtens, & RQVFTEN REAL, DIMENSION( ims:ime , kms:kme , jms:jme ), & OPTIONAL, & INTENT(INOUT) :: & RTHCUTEN, & RQVCUTEN, & RQVBLTEN, & RTHBLTEN, & RQCCUTEN, & RQICUTEN ! ! Flags relating to the optional tendency arrays declared above ! Models that carry the optional tendencies will provdide the ! optional arguments at compile time; these flags all the model ! to determine at run-time whether a particular tracer is in ! use or not. ! LOGICAL, OPTIONAL :: & F_QV & ,F_QC & ,F_QR & ,F_QI & ,F_QS #if ( WRF_DFI_RADAR == 1 ) ! ! option of cap suppress: ! do_capsuppress = 1 do ! do_capsuppress = other don't ! ! INTEGER, INTENT(IN ) ,OPTIONAL :: do_capsuppress REAL, DIMENSION( ims:ime, jms:jme ),INTENT(IN ),OPTIONAL :: cap_suppress_loc REAL, DIMENSION( its:ite ) :: cap_suppress_j #endif ! LOCAL VARS real, dimension(ims:ime,jms:jme,1:ensdim),intent(inout) :: & xf_ens,pr_ens real, dimension ( its:ite , jts:jte , 1:ensdim) :: & massflni,xfi_ens,pri_ens REAL, DIMENSION( its:ite , jts:jte ) :: MASSI_FLX, & APRi_GR,APRi_W,APRi_MC,APRi_ST,APRi_AS, & edti_out,APRi_CAPMA,APRi_CAPME,APRi_CAPMI,gswi real, dimension (its:ite,kts:kte) :: & SUBT,SUBQ,OUTT,OUTQ,OUTQC,phh,subm,cupclw,dhdt, & outts,outqs real, dimension (its:ite) :: & pret, ter11, aa0, fp,xlandi !+lxz integer, dimension (its:ite) :: & kbcon, ktop,kpbli,k22s,kbcons,ktops !.lxz integer, dimension (its:ite,jts:jte) :: & iact_old_gr integer :: iens,ibeg,iend,jbeg,jend,n,nn,ens4n integer :: ibegh,iendh,jbegh,jendh integer :: ibegc,iendc,jbegc,jendc ! ! basic environmental input includes moisture convergence (mconv) ! omega (omeg), windspeed (us,vs), and a flag (aaeq) to turn off ! convection for this call only and at that particular gridpoint ! real, dimension (its:ite,kts:kte) :: & T2d,q2d,PO,P2d,US,VS,tn,qo,tshall,qshall real, dimension (ips-2:ipe+2,kps:kpe,jps-2:jpe+2) :: & ave_f_t,ave_f_q real, dimension (its:ite,kts:kte,1:ens4) :: & omeg,tx,qx real, dimension (its:ite) :: & Z1,PSUR,AAEQ,direction,cuten,umean,vmean,pmean,xmbs real, dimension (its:ite,1:ens4) :: & mconv INTEGER :: i,j,k,ICLDCK,ipr,jpr REAL :: tcrit,tscl_KF,dp,dq,sub_spread,subcenter INTEGER :: itf,jtf,ktf,iss,jss,nbegin,nend INTEGER :: high_resolution REAL :: rkbcon,rktop !-lxz ! ruc variable real, dimension (its:ite) :: tkm ! A. Betts for shallow convection: suggestion for the KF timescale < DELTAX / 25 m/s tscl_kf=dx/25. ! ! write(0,*)'ishallow = ',ishallow_g3 high_resolution=0 if(cugd_avedx.gt.1) high_resolution=1 subcenter=0. ! subcenter=1./float(cugd_avedx) sub_spread=max(1.,float(cugd_avedx*cugd_avedx-1)) sub_spread=(1.-subcenter)/sub_spread iens=1 ipr=43 jpr=1 ipr=0 jpr=0 ! if(itimestep.eq.8)then ! ipr=37 ! jpr=16 ! endif IF ( periodic_x ) THEN ibeg=max(its,ids) iend=min(ite,ide-1) ibegc=max(its,ids) iendc=min(ite,ide-1) ELSE ibeg=max(its,ids) iend=min(ite,ide-1) ibegc=max(its,ids+4) iendc=min(ite,ide-5) END IF IF ( periodic_y ) THEN jbeg=max(jts,jds) jend=min(jte,jde-1) jbegc=max(jts,jds) jendc=min(jte,jde-1) ELSE jbeg=max(jts,jds) jend=min(jte,jde-1) jbegc=max(jts,jds+4) jendc=min(jte,jde-5) END IF do j=jts,jte do i=its,ite k22_shallow(i,j)=0 kbcon_shallow(i,j)=0 ktop_shallow(i,j)=0 xmb_shallow(i,j)=0 enddo enddo tcrit=258. ave_f_t=0. ave_f_q=0. itf=MIN(ite,ide-1) ktf=MIN(kte,kde-1) jtf=MIN(jte,jde-1) ! #if ( EM_CORE == 1 ) if(high_resolution.eq.1)then ! ! calculate these on the halo...the incominh tendencies have been exchanged on a 24pt halo ! only neede for high resolution run ! ibegh=its jbegh=jts iendh=ite jendh=jte if(its.eq.ips)ibegh=max(its-1,ids) if(jts.eq.jps)jbegh=max(jts-1,jds) if(jte.eq.jpe)jendh=min(jte+1,jde-1) if(ite.eq.ipe)iendh=min(ite+1,ide-1) DO J = jbegh,jendh DO k= kts,ktf DO I= ibegh,iendh ave_f_t(i,k,j)=(rthften(i-1,k,j-1)+rthften(i-1,k,j) + rthften(i-1,k,j+1)+ & rthften(i,k,j-1) +rthften(i,k,j) +rthften(i,k,j+1)+ & rthften(i+1,k,j-1) +rthften(i+1,k,j) +rthften(i+1,k,j+1))/9. ave_f_q(i,k,j)=(rqvften(i-1,k,j-1)+rqvften(i-1,k,j) + rqvften(i-1,k,j+1)+ & rqvften(i,k,j-1) +rqvften(i,k,j) +rqvften(i,k,j+1)+ & rqvften(i+1,k,j-1) +rqvften(i+1,k,j) +rqvften(i+1,k,j+1))/9. ! ave_f_t(i,k,j)=rthften(i,k,j) ! ave_f_q(i,k,j)=rqvften(i,k,j) ENDDO ENDDO ENDDO endif #endif DO 100 J = jts,jtf DO n= 1,ensdim DO I= its,itf xfi_ens(i,j,n)=0. pri_ens(i,j,n)=0. ! xfi_ens(i,j,n)=xf_ens(i,j,n) ! pri_ens(i,j,n)=pr_ens(i,j,n) ENDDO ENDDO DO I= its,itf kbcon(i)=0 ktop(i)=0 tkm(i)=0. HBOT(I,J) =REAL(KTE) HTOP(I,J) =REAL(KTS) iact_old_gr(i,j)=0 mass_flux(i,j)=0. massi_flx(i,j)=0. raincv(i,j)=0. pratec (i,j)=0. edt_out(i,j)=0. edti_out(i,j)=0. gswi(i,j)=gsw(i,j) xlandi(i)=xland(i,j) APRi_GR(i,j)=apr_gr(i,j) APRi_w(i,j)=apr_w(i,j) APRi_mc(i,j)=apr_mc(i,j) APRi_st(i,j)=apr_st(i,j) APRi_as(i,j)=apr_as(i,j) APRi_capma(i,j)=apr_capma(i,j) APRi_capme(i,j)=apr_capme(i,j) APRi_capmi(i,j)=apr_capmi(i,j) CU_ACT_FLAG(i,j) = .true. ENDDO do k=kts,kte DO I= its,itf cugd_tten(i,k,j)=0. cugd_ttens(i,k,j)=0. cugd_qvten(i,k,j)=0. cugd_qvtens(i,k,j)=0. cugd_qcten(i,k,j)=0. ENDDO ENDDO DO n=1,ens4 DO I= its,itf mconv(i,n)=0. ENDDO do k=kts,kte DO I= its,itf omeg(i,k,n)=0. tx(i,k,n)=0. qx(i,k,n)=0. ENDDO ENDDO ENDDO DO k=1,ensdim DO I= its,itf massflni(i,j,k)=0. ENDDO ENDDO ! put hydrostatic pressure on half levels DO K=kts,ktf DO I=ITS,ITF phh(i,k) = p(i,k,j) ENDDO ENDDO DO I=ITS,ITF PSUR(I)=p8w(I,1,J)*.01 ! PSUR(I)=p(I,1,J)*.01 TER11(I)=HT(i,j) aaeq(i)=0. direction(i)=0. pret(i)=0. umean(i)=0. vmean(i)=0. pmean(i)=0. kpbli(i)=kpbl(i,j) ENDDO ! if(j.eq.jpr)write(0,*)'psur(ipr),ter11(ipr),kpbli(ipr)' ! if(j.eq.jpr)write(0,*)psur(ipr),ter11(ipr),kpbli(ipr),r_v DO K=kts,ktf DO I=ITS,ITF po(i,k)=phh(i,k)*.01 subm(i,k)=0. P2d(I,K)=PO(i,k) US(I,K) =u(i,k,j) VS(I,K) =v(i,k,j) T2d(I,K)=t(i,k,j) q2d(I,K)=q(i,k,j) IF(Q2d(I,K).LT.1.E-08)Q2d(I,K)=1.E-08 SUBT(I,K)=0. SUBQ(I,K)=0. OUTT(I,K)=0. OUTQ(I,K)=0. OUTQC(I,K)=0. OUTTS(I,K)=0. OUTQS(I,K)=0. TN(I,K)=t2d(i,k)+RTHFTEN(i,k,j)*dt QO(I,K)=q2d(i,k)+RQVFTEN(i,k,j)*dt TSHALL(I,K)=t2d(i,k)+RTHBLTEN(i,k,j)*pi(i,k,j)*dt DHDT(I,K)=cp*RTHBLTEN(i,k,j)*pi(i,k,j)+ XLV*RQVBLTEN(i,k,j) QSHALL(I,K)=q2d(i,k)+RQVBLTEN(i,k,j)*dt if(high_resolution.eq.1)then TN(I,K)=t2d(i,k)+ave_f_t(i,k,j)*dt QO(I,K)=q2d(i,k)+ave_f_q(i,k,j)*dt endif IF(TN(I,K).LT.200.)TN(I,K)=T2d(I,K) IF(QO(I,K).LT.1.E-08)QO(I,K)=1.E-08 ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,123)k,p2d(i,k),t2d(i,k),tn(i,k),q2d(i,k),QO(i,k),RTHBLTEN(i,k,j),RQVBLTEN(i,k,j) ! endif ENDDO ENDDO 123 format(1x,i2,f8.0,1x,2(1x,f8.3),4(1x,e12.4)) ens4n=0 nbegin=0 nend=0 if(ens4_spread.gt.1)then nbegin=-ens4_spread/2 nend=ens4_spread/2 endif do nn=nbegin,nend,1 jss=max(j+nn,jds+0) jss=min(jss,jde-1) do n=nbegin,nend,1 ens4n=ens4n+1 DO K=kts,ktf DO I=ITS,ITF iss=max(i+n,ids+0) iss=min(iss,ide-1) omeg(I,K,ens4n)= -g*rho(i,k,j)*w(iss,k,jss) ! omeg(I,K,ens4n)= -g*rho(i,k,j)*w(i,k,j) Tx(I,K,ens4n)=t2d(i,k)+RTHFTEN(iss,k,jss)*dt ! Tx(I,K,ens4n)=t2d(i,k)+RTHFTEN(i,k,j)*dt if(high_resolution.eq.1)Tx(I,K,ens4n)=t2d(i,k)+ave_f_t(iss,k,jss)*dt IF(Tx(I,K,ens4n).LT.200.)Tx(I,K,ens4n)=T2d(I,K) Qx(I,K,ens4n)=q2d(i,k)+RQVFTEN(iss,k,jss)*dt Qx(I,K,ens4n)=q2d(i,k)+RQVFTEN(i,k,j)*dt if(high_resolution.eq.1)qx(I,K,ens4n)=q2d(i,k)+ave_f_q(iss,k,jss)*dt IF(Qx(I,K,ens4n).LT.1.E-08)Qx(I,K,ens4n)=1.E-08 enddo enddo enddo !n enddo !nn do k= kts+1,ktf-1 DO I = its,itf if((p2d(i,1)-p2d(i,k)).gt.150.and.p2d(i,k).gt.300)then dp=-.5*(p2d(i,k+1)-p2d(i,k-1)) umean(i)=umean(i)+us(i,k)*dp vmean(i)=vmean(i)+vs(i,k)*dp pmean(i)=pmean(i)+dp endif enddo enddo DO I = its,itf umean(i)=umean(i)/pmean(i) vmean(i)=vmean(i)/pmean(i) direction(i)=(atan2(umean(i),vmean(i))+3.1415926)*57.29578 if(direction(i).gt.360.)direction(i)=direction(i)-360. ENDDO do n=1,ens4 DO K=kts,ktf-1 DO I = its,itf dq=(q2d(i,k+1)-q2d(i,k)) mconv(i,n)=mconv(i,n)+omeg(i,k,n)*dq/g enddo ENDDO ENDDO do n=1,ens4 DO I = its,itf if(mconv(i,n).lt.0.)mconv(i,n)=0. ENDDO ENDDO ! !---- CALL CUMULUS PARAMETERIZATION ! #if ( WRF_DFI_RADAR == 1 ) if(do_capsuppress == 1 ) then DO I= its,itf cap_suppress_j(i)=cap_suppress_loc(i,j) ENDDO endif #endif CALL CUP_enss_3d(outqc,j,AAEQ,T2d,Q2d,TER11,subm,TN,QO,PO,PRET,& P2d,OUTT,OUTQ,DT,itimestep,tkm,PSUR,US,VS,tcrit,iens,tx,qx, & tshall,qshall,kpbli,DHDT,outts,outqs,tscl_kf, & k22s,kbcons,ktops,xmbs, & mconv,massflni,iact_old_gr,omeg,direction,MASSi_FLX, & maxiens,maxens,maxens2,maxens3,ensdim, & APRi_GR,APRi_W,APRi_MC,APRi_ST,APRi_AS, & APRi_CAPMA,APRi_CAPME,APRi_CAPMI,kbcon,ktop,cupclw, & xfi_ens,pri_ens,XLANDi,gswi,edti_out,subt,subq, & ! ruc lv_p,rv_p,cpd_p,g0_p,ichoice,ipr,jpr, & xlv,r_v,cp,g,ichoice,ipr,jpr,ens4,high_resolution, & ishallow_g3,itf,jtf,ktf, & its,ite, jts,jte, kts,kte & #if ( WRF_DFI_RADAR == 1 ) ,do_capsuppress,cap_suppress_j & #endif ) if(j.lt.jbegc.or.j.gt.jendc)go to 100 DO I=ibegc,iendc xmb_shallow(i,j)=xmbs(i) k22_shallow(i,j)=k22s(i) kbcon_shallow(i,j)=kbcons(i) ktop_shallow(i,j)=ktops(i) cuten(i)=0. if(pret(i).gt.0.)then cuten(i)=1. ! raincv(i,j)=pret(i)*dt endif ENDDO ! if(j.eq.jpr)write(0,*)'precip,ktop,kbcon = ',pret(ipr),ktop(ipr),kbcon(ipr) DO I=ibegc,iendc DO K=kts,ktf cugd_ttens(I,K,J)=subt(i,k)*cuten(i)*sub_spread cugd_qvtens(I,K,J)=subq(i,k)*cuten(i)*sub_spread ! cugd_tten(I,K,J)=outt(i,k)*cuten(i) ! cugd_qvten(I,K,J)=outq(i,k)*cuten(i) cugd_tten(I,K,J)=outts(i,k)+outt(i,k)*cuten(i) cugd_qvten(I,K,J)=outqs(i,k)+outq(i,k)*cuten(i) cugd_qcten(I,K,J)=outqc(i,k)*cuten(i) ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)subt(i,k)+outt(i,k),subq(i,k)+outq(i,k),outts(i,k),outqs(i,k) ! endif ENDDO ENDDO DO I=ibegc,iendc if(pret(i).gt.0.)then raincv(i,j)=pret(i)*dt pratec(i,j)=pret(i) rkbcon = kte+kts - kbcon(i) rktop = kte+kts - ktop(i) if (ktop(i) > HTOP(i,j)) HTOP(i,j) = ktop(i)+.001 if (kbcon(i) < HBOT(i,j)) HBOT(i,j) = kbcon(i)+.001 endif ENDDO DO n= 1,ensdim DO I= ibegc,iendc xf_ens(i,j,n)=xfi_ens(i,j,n) pr_ens(i,j,n)=pri_ens(i,j,n) ENDDO ENDDO DO I= ibegc,iendc APR_GR(i,j)=apri_gr(i,j) APR_w(i,j)=apri_w(i,j) APR_mc(i,j)=apri_mc(i,j) APR_st(i,j)=apri_st(i,j) APR_as(i,j)=apri_as(i,j) APR_capma(i,j)=apri_capma(i,j) APR_capme(i,j)=apri_capme(i,j) APR_capmi(i,j)=apri_capmi(i,j) mass_flux(i,j)=massi_flx(i,j) edt_out(i,j)=edti_out(i,j) ENDDO IF(PRESENT(RQCCUTEN)) THEN IF ( F_QC ) THEN DO K=kts,ktf DO I=ibegc,iendc RQCCUTEN(I,K,J)=outqc(I,K)*cuten(i) IF ( PRESENT( GDC ) ) GDC(I,K,J)=CUPCLW(I,K)*cuten(i) IF ( PRESENT( GDC2 ) ) GDC2(I,K,J)=0. ENDDO ENDDO ENDIF ENDIF !...... QSTEN STORES GRAUPEL TENDENCY IF IT EXISTS, OTHERISE SNOW (V2) IF(PRESENT(RQICUTEN).AND.PRESENT(RQCCUTEN))THEN IF (F_QI) THEN DO K=kts,ktf DO I=ibegc,iendc if(t2d(i,k).lt.258.)then RQICUTEN(I,K,J)=outqc(I,K)*cuten(i) cugd_qcten(i,k,j)=0. RQCCUTEN(I,K,J)=0. IF ( PRESENT( GDC2 ) ) GDC2(I,K,J)=CUPCLW(I,K)*cuten(i) else RQICUTEN(I,K,J)=0. RQCCUTEN(I,K,J)=outqc(I,K)*cuten(i) IF ( PRESENT( GDC ) ) GDC(I,K,J)=CUPCLW(I,K)*cuten(i) endif ENDDO ENDDO ENDIF ENDIF 100 continue END SUBROUTINE G3DRV SUBROUTINE CUP_enss_3d(OUTQC,J,AAEQ,T,Q,Z1,sub_mas, & TN,QO,PO,PRE,P,OUTT,OUTQ,DTIME,ktau,tkmax,PSUR,US,VS, & TCRIT,iens,tx,qx, & tshall,qshall,kpbl,dhdt,outts,outqs,tscl_kf, & k23,kbcon3,ktop3,xmb3, & mconv,massfln,iact, & omeg,direction,massflx,maxiens, & maxens,maxens2,maxens3,ensdim, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI,kbcon,ktop,cupclw, & !-lxz xf_ens,pr_ens,xland,gsw,edt_out,subt,subq, & xl,rv,cp,g,ichoice,ipr,jpr,ens4,high_resolution, & ishallow_g3,itf,jtf,ktf, & its,ite, jts,jte, kts,kte & #if ( WRF_DFI_RADAR == 1 ) ! Optional CAP suppress option ,do_capsuppress,cap_suppress_j & #endif ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf,ktau, & its,ite, jts,jte, kts,kte,ipr,jpr,ens4,high_resolution integer, intent (in ) :: & j,ensdim,maxiens,ishallow_g3,maxens,maxens2,maxens3,ichoice,iens ! ! ! real, dimension (its:ite,jts:jte,1:ensdim) & ,intent (inout) :: & massfln,xf_ens,pr_ens real, dimension (its:ite,jts:jte) & ,intent (inout ) :: & APR_GR,APR_W,APR_MC,APR_ST,APR_AS,APR_CAPMA, & APR_CAPME,APR_CAPMI,massflx,edt_out real, dimension (its:ite,jts:jte) & ,intent (in ) :: & gsw integer, dimension (its:ite,jts:jte) & ,intent (in ) :: & iact ! outtem = output temp tendency (per s) ! outq = output q tendency (per s) ! outqc = output qc tendency (per s) ! pre = output precip real, dimension (its:ite,kts:kte) & ,intent (inout ) :: & DHDT,OUTT,OUTQ,OUTQC,subt,subq,sub_mas,cupclw,outts,outqs real, dimension (its:ite) & ,intent (out ) :: & pre,xmb3 integer, dimension (its:ite) & ,intent (out ) :: & kbcon,ktop,k23,kbcon3,ktop3 integer, dimension (its:ite) & ,intent (in ) :: & kpbl ! ! basic environmental input includes moisture convergence (mconv) ! omega (omeg), windspeed (us,vs), and a flag (aaeq) to turn off ! convection for this call only and at that particular gridpoint ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & T,PO,P,US,VS,tn,tshall,qshall real, dimension (its:ite,kts:kte,1:ens4) & ,intent (inout ) :: & omeg,tx,qx real, dimension (its:ite,kts:kte) & ,intent (inout) :: & Q,QO real, dimension (its:ite) & ,intent (in ) :: & Z1,PSUR,AAEQ,direction,tkmax,xland real, dimension (its:ite,1:ens4) & ,intent (in ) :: & mconv real & ,intent (in ) :: & dtime,tcrit,xl,cp,rv,g,tscl_kf #if ( WRF_DFI_RADAR == 1 ) ! ! option of cap suppress: ! do_capsuppress = 1 do ! do_capsuppress = other don't ! ! INTEGER, INTENT(IN ) ,OPTIONAL :: do_capsuppress REAL, DIMENSION( its:ite ),INTENT(IN ) ,OPTIONAL :: cap_suppress_j #endif ! ! local ensemble dependent variables in this routine ! real, dimension (its:ite,1:maxens) :: & xaa0_ens real, dimension (1:maxens) :: & mbdt_ens real, dimension (1:maxens2) :: & edt_ens real, dimension (its:ite,1:maxens2) :: & edtc real, dimension (its:ite,kts:kte,1:maxens2) :: & dellat_ens,dellaqc_ens,dellaq_ens,pwo_ens,subt_ens,subq_ens ! ! ! !***************** the following are your basic environmental ! variables. They carry a "_cup" if they are ! on model cloud levels (staggered). They carry ! an "o"-ending (z becomes zo), if they are the forced ! variables. They are preceded by x (z becomes xz) ! to indicate modification by some typ of cloud ! ! z = heights of model levels ! q = environmental mixing ratio ! qes = environmental saturation mixing ratio ! t = environmental temp ! p = environmental pressure ! he = environmental moist static energy ! hes = environmental saturation moist static energy ! z_cup = heights of model cloud levels ! q_cup = environmental q on model cloud levels ! qes_cup = saturation q on model cloud levels ! t_cup = temperature (Kelvin) on model cloud levels ! p_cup = environmental pressure ! he_cup = moist static energy on model cloud levels ! hes_cup = saturation moist static energy on model cloud levels ! gamma_cup = gamma on model cloud levels ! ! ! hcd = moist static energy in downdraft ! zd normalized downdraft mass flux ! dby = buoancy term ! entr = entrainment rate ! zd = downdraft normalized mass flux ! entr= entrainment rate ! hcd = h in model cloud ! bu = buoancy term ! zd = normalized downdraft mass flux ! gamma_cup = gamma on model cloud levels ! mentr_rate = entrainment rate ! qcd = cloud q (including liquid water) after entrainment ! qrch = saturation q in cloud ! pwd = evaporate at that level ! pwev = total normalized integrated evaoprate (I2) ! entr= entrainment rate ! z1 = terrain elevation ! entr = downdraft entrainment rate ! jmin = downdraft originating level ! kdet = level above ground where downdraft start detraining ! psur = surface pressure ! z1 = terrain elevation ! pr_ens = precipitation ensemble ! xf_ens = mass flux ensembles ! massfln = downdraft mass flux ensembles used in next timestep ! omeg = omega from large scale model ! mconv = moisture convergence from large scale model ! zd = downdraft normalized mass flux ! zu = updraft normalized mass flux ! dir = "storm motion" ! mbdt = arbitrary numerical parameter ! dtime = dt over which forcing is applied ! iact_gr_old = flag to tell where convection was active ! kbcon = LFC of parcel from k22 ! k22 = updraft originating level ! icoic = flag if only want one closure (usually set to zero!) ! dby = buoancy term ! ktop = cloud top (output) ! xmb = total base mass flux ! hc = cloud moist static energy ! hkb = moist static energy at originating level ! mentr_rate = entrainment rate real, dimension (its:ite,kts:kte) :: & he3,hes3,qes3,z3,zdo3,zu3_0,hc3_0,dby3_0,gamma3_0_cup, & qes3_cup,q3_cup,he3_cup,hes3_cup,z3_cup,gamma3_cup,t3_cup, & xhe3,xhes3,xqes3,xz3,xt3,xq3, & xqes3_cup,xq3_cup,xhe3_cup,xhes3_cup,xz3_cup,xgamma3_cup, & xt3_cup, & xdby3,xqc3,xhc3,xqrc3,xzu3, & dby3,qc3,pw3,hc3,qrc3,zu3,cd3,DELLAH3,DELLAQ3, & dsubt3,dsubq3,DELLAT3,DELLAQC3 real, dimension (its:ite,kts:kte) :: & he,hes,qes,z, & heo,heso,qeso,zo, & xhe,xhes,xqes,xz,xt,xq, & qes_cup,q_cup,he_cup,hes_cup,z_cup,p_cup,gamma_cup,t_cup, & qeso_cup,qo_cup,heo_cup,heso_cup,zo_cup,po_cup,gammao_cup, & tn_cup, & xqes_cup,xq_cup,xhe_cup,xhes_cup,xz_cup,xp_cup,xgamma_cup, & xt_cup, & dby,qc,qrcd,pwd,pw,hcd,qcd,dbyd,hc,qrc,zu,zd,clw_all, & dbyo,qco,qrcdo,pwdo,pwo,hcdo,qcdo,dbydo,hco,qrco,zuo,zdo, & xdby,xqc,xqrcd,xpwd,xpw,xhcd,xqcd,xhc,xqrc,xzu,xzd, & ! cd = detrainment function for updraft ! cdd = detrainment function for downdraft ! dellat = change of temperature per unit mass flux of cloud ensemble ! dellaq = change of q per unit mass flux of cloud ensemble ! dellaqc = change of qc per unit mass flux of cloud ensemble cd,cdd,scr1,DELLAH,DELLAQ,DELLAT,DELLAQC,dsubt,dsubq ! aa0 cloud work function for downdraft ! edt = epsilon ! aa0 = cloud work function without forcing effects ! aa1 = cloud work function with forcing effects ! xaa0 = cloud work function with cloud effects (ensemble dependent) ! edt = epsilon real, dimension (its:ite) :: & aa3_0,aa3,hkb3,qkb3,pwav3,bu3,xaa3,xhkb3, & hkb3_0,edt,edto,edtx,AA1,AA0,XAA0,HKB, & HKBO,aad,XHKB,QKB,QKBO,edt3, & XMB,XPWAV,XPWEV,PWAV,PWEV,PWAVO, & PWEVO,BU,BUO,cap_max,xland1, & cap_max_increment,closure_n,cap_max3 real, dimension (its:ite,1:ens4) :: & axx integer, dimension (its:ite) :: & kzdown,KDET,K22,KB,JMIN,kstabi,kstabm,K22x,jmin3,kdet3, & !-lxz KBCONx,KBx,KTOPx,ierr,ierr2,ierr3,KBMAX,ierr5,ierr5_0 integer :: & nall,iedt,nens,nens3,ki,I,K,KK,iresult real :: & day,dz,mbdt,mbdt_s,entr_rate,radius,entrd_rate,mentr_rate,mentrd_rate, & zcutdown,edtmax,edtmin,depth_min,zkbmax,z_detr,zktop, & massfld,dh,cap_maxs,trash,entr_rate3,mentr_rate3 integer :: jmini logical :: keep_going real xff_shal(9),blqe,xkshal day=86400. do i=its,itf xmb3(i)=0. closure_n(i)=16. xland1(i)=1. if(xland(i).gt.1.5)xland1(i)=0. ! cap_max_increment(i)=50. cap_max_increment(i)=25. enddo ! !--- specify entrainmentrate and detrainmentrate ! if(iens.le.4)then radius=14000.-float(iens)*2000. else radius=12000. endif ! !--- gross entrainment rate (these may be changed later on in the !--- program, depending what your detrainment is!!) ! entr_rate =.2/radius entr_rate3=.2/200. ! !--- entrainment of mass ! mentrd_rate=0. mentr_rate=entr_rate mentr_rate3=entr_rate3 ! !--- initial detrainmentrates ! do k=kts,ktf do i=its,itf cupclw(i,k)=0. cd(i,k)=0.01*entr_rate cd3(i,k)=entr_rate3 cdd(i,k)=0. zdo3(i,k)=0. hcdo(i,k)=0. qrcdo(i,k)=0. dellaqc(i,k)=0. enddo enddo ! !--- max/min allowed value for epsilon (ratio downdraft base mass flux/updraft ! base mass flux ! edtmax=1. edtmin=.2 ! !--- minimum depth (m), clouds must have ! depth_min=500. ! !--- maximum depth (mb) of capping !--- inversion (larger cap = no convection) ! ! cap_maxs=125. cap_maxs=75. DO i=its,itf kbmax(i)=1 jmin3(i)=0 kdet3(i)=0 aa0(i)=0. aa3_0(i)=0. aa1(i)=0. aa3(i)=0. aad(i)=0. edt(i)=0. edt3(i)=0. kstabm(i)=ktf-1 IERR(i)=0 IERR2(i)=0 IERR3(i)=0 IERR5(i)=0 IERR5_0(i)=0 enddo ! !--- first check for upstream convection ! #if ( WRF_DFI_RADAR == 1 ) if(do_capsuppress == 1) then do i=its,itf cap_max(i)=cap_maxs cap_max3(i)=25. if(gsw(i,j).lt.1.or.high_resolution.eq.1)cap_max(i)=25. if (abs(cap_suppress_j(i) - 1.0 ) < 0.1 ) then cap_max(i)=cap_maxs+75. elseif (abs(cap_suppress_j(i) - 0.0 ) < 0.1 ) then cap_max(i)=10.0 endif iresult=0 enddo else do i=its,itf cap_max(i)=cap_maxs cap_max3(i)=25. if(gsw(i,j).lt.1.or.high_resolution.eq.1)cap_max(i)=25. iresult=0 enddo endif do i=its,itf edt_out(i,j)=cap_max(i) enddo #else do i=its,itf cap_max(i)=cap_maxs cap_max3(i)=25. if(gsw(i,j).lt.1.or.high_resolution.eq.1)cap_max(i)=25. iresult=0 enddo #endif ! !--- max height(m) above ground where updraft air can originate ! zkbmax=4000. ! !--- height(m) above which no downdrafts are allowed to originate ! zcutdown=3000. ! !--- depth(m) over which downdraft detrains all its mass ! z_detr=1250. ! do nens=1,maxens mbdt_ens(nens)=(float(nens)-3.)*dtime*1.e-3+dtime*5.E-03 enddo do nens=1,maxens2 edt_ens(nens)=.95-float(nens)*.01 enddo ! !--- environmental conditions, FIRST HEIGHTS ! do i=its,itf if(ierr(i).ne.20)then do k=1,maxens*maxens2*maxens3 xf_ens(i,j,(iens-1)*maxens*maxens2*maxens3+k)=0. pr_ens(i,j,(iens-1)*maxens*maxens2*maxens3+k)=0. enddo endif enddo ! !--- calculate moist static energy, heights, qes ! call cup_env(z,qes,he,hes,t,q,p,z1, & psur,ierr,tcrit,0,xl,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_env(zo,qeso,heo,heso,tn,qo,po,z1, & psur,ierr,tcrit,0,xl,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- environmental values on cloud levels ! call cup_env_clev(t,qes,q,he,hes,z,p,qes_cup,q_cup,he_cup, & hes_cup,z_cup,p_cup,gamma_cup,t_cup,psur, & ierr,z1,xl,rv,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_env_clev(tn,qeso,qo,heo,heso,zo,po,qeso_cup,qo_cup, & heo_cup,heso_cup,zo_cup,po_cup,gammao_cup,tn_cup,psur, & ierr,z1,xl,rv,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do i=its,itf if(aaeq(i).lt.-0.1)then ierr(i)=20 endif ! if(ierr(i).eq.0)then ! do k=kts,ktf if(zo_cup(i,k).gt.zkbmax+z1(i))then kbmax(i)=k go to 25 endif enddo 25 continue ! !--- level where detrainment for downdraft starts ! do k=kts,ktf if(zo_cup(i,k).gt.z_detr+z1(i))then kdet(i)=k go to 26 endif enddo 26 continue ! ! endif enddo ! ! ! !------- DETERMINE LEVEL WITH HIGHEST MOIST STATIC ENERGY CONTENT - K22 ! CALL cup_MAXIMI(HEO_CUP,3,KBMAX,K22,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) DO 36 i=its,itf IF(ierr(I).eq.0.)THEN IF(K22(I).GE.KBMAX(i))ierr(i)=2 endif 36 CONTINUE ! !--- DETERMINE THE LEVEL OF CONVECTIVE CLOUD BASE - KBCON ! call cup_kbcon(cap_max_increment,1,k22,kbcon,heo_cup,heso_cup, & ierr,kbmax,po_cup,cap_max, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- increase detrainment in stable layers ! CALL cup_minimi(HEso_cup,Kbcon,kstabm,kstabi,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do i=its,itf IF(ierr(I).eq.0.)THEN if(kstabm(i)-1.gt.kstabi(i))then do k=kstabi(i),kstabm(i)-1 cd(i,k)=cd(i,k-1)+.15*entr_rate if(cd(i,k).gt.1.0*entr_rate)cd(i,k)=1.0*entr_rate enddo ENDIF ENDIF ENDDO ! !--- calculate incloud moist static energy ! call cup_up_he(k22,hkb,z_cup,cd,mentr_rate,he_cup,hc, & kbcon,ierr,dby,he,hes_cup,'deep', & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_he(k22,hkbo,zo_cup,cd,mentr_rate,heo_cup,hco, & kbcon,ierr,dbyo,heo,heso_cup,'deep', & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) !--- DETERMINE CLOUD TOP - KTOP ! call cup_ktop(1,dbyo,kbcon,ktop,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) DO 37 i=its,itf kzdown(i)=0 if(ierr(i).eq.0)then zktop=(zo_cup(i,ktop(i))-z1(i))*.6 zktop=min(zktop+z1(i),zcutdown+z1(i)) do k=kts,kte if(zo_cup(i,k).gt.zktop)then kzdown(i)=k go to 37 endif enddo endif 37 CONTINUE ! !--- DOWNDRAFT ORIGINATING LEVEL - JMIN ! call cup_minimi(HEso_cup,K22,kzdown,JMIN,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) DO 100 i=its,ite IF(ierr(I).eq.0.)THEN ! !--- check whether it would have buoyancy, if there where !--- no entrainment/detrainment ! jmini = jmin(i) keep_going = .TRUE. do while ( keep_going ) keep_going = .FALSE. if ( jmini - 1 .lt. kdet(i) ) kdet(i) = jmini-1 if ( jmini .ge. ktop(i)-1 ) jmini = ktop(i) - 2 ki = jmini hcdo(i,ki)=heso_cup(i,ki) DZ=Zo_cup(i,Ki+1)-Zo_cup(i,Ki) dh=0. do k=ki-1,1,-1 hcdo(i,k)=heso_cup(i,jmini) DZ=Zo_cup(i,K+1)-Zo_cup(i,K) dh=dh+dz*(HCDo(i,K)-heso_cup(i,k)) if(dh.gt.0.)then jmini=jmini-1 if ( jmini .gt. 3 ) then keep_going = .TRUE. else ierr(i) = 9 exit endif endif enddo enddo jmin(i) = jmini if ( jmini .le. 3 ) then ierr(i)=4 endif ENDIF 100 continue ! ! - Must have at least depth_min m between cloud convective base ! and cloud top. ! do i=its,itf IF(ierr(I).eq.0.)THEN IF(-zo_cup(I,KBCON(I))+zo_cup(I,KTOP(I)).LT.depth_min)then ierr(i)=6 endif endif enddo ! !c--- normalized updraft mass flux profile ! call cup_up_nms(zu,z_cup,mentr_rate,cd,kbcon,ktop,ierr,k22, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_nms(zuo,zo_cup,mentr_rate,cd,kbcon,ktop,ierr,k22, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !c--- normalized downdraft mass flux profile,also work on bottom detrainment !--- in this routine ! call cup_dd_nms(zd,z_cup,cdd,mentrd_rate,jmin,ierr, & 0,kdet,z1, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_dd_nms(zdo,zo_cup,cdd,mentrd_rate,jmin,ierr, & 1,kdet,z1, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- downdraft moist static energy ! call cup_dd_he(hes_cup,zd,hcd,z_cup,cdd,mentrd_rate, & jmin,ierr,he,dbyd,he_cup, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_dd_he(heso_cup,zdo,hcdo,zo_cup,cdd,mentrd_rate, & jmin,ierr,heo,dbydo,he_cup,& itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- calculate moisture properties of downdraft ! call cup_dd_moisture_3d(zd,hcd,hes_cup,qcd,qes_cup, & pwd,q_cup,z_cup,cdd,mentrd_rate,jmin,ierr,gamma_cup, & pwev,bu,qrcd,q,he,t_cup,2,xl,high_resolution, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_dd_moisture_3d(zdo,hcdo,heso_cup,qcdo,qeso_cup, & pwdo,qo_cup,zo_cup,cdd,mentrd_rate,jmin,ierr,gammao_cup, & pwevo,bu,qrcdo,qo,heo,tn_cup,1,xl,high_resolution, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- calculate moisture properties of updraft ! call cup_up_moisture('deep',ierr,z_cup,qc,qrc,pw,pwav, & kbcon,ktop,cd,dby,mentr_rate,clw_all, & q,GAMMA_cup,zu,qes_cup,k22,q_cup,xl, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do k=kts,ktf do i=its,itf cupclw(i,k)=qrc(i,k) enddo enddo call cup_up_moisture('deep',ierr,zo_cup,qco,qrco,pwo,pwavo, & kbcon,ktop,cd,dbyo,mentr_rate,clw_all, & qo,GAMMAo_cup,zuo,qeso_cup,k22,qo_cup,xl,& itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- calculate workfunctions for updrafts ! call cup_up_aa0(aa0,z,zu,dby,GAMMA_CUP,t_cup, & kbcon,ktop,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_aa0(aa1,zo,zuo,dbyo,GAMMAo_CUP,tn_cup, & kbcon,ktop,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do i=its,itf if(ierr(i).eq.0)then if(aa1(i).eq.0.)then ierr(i)=17 endif endif enddo !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! NEXT section for shallow convection ! if(ishallow_g3.eq.1)then ! write(0,*)'now do shallow for j = ',j call cup_env(z3,qes3,he3,hes3,tshall,qshall,po,z1, & psur,ierr5,tcrit,0,xl,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_env_clev(tshall,qes3,qshall,he3,hes3,z3,po,qes3_cup,q3_cup, & he3_cup,hes3_cup,z3_cup,po_cup,gamma3_cup,t3_cup,psur, & ierr5,z1,xl,rv,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) CALL cup_MAXIMI(HE3_CUP,1,kbmax,K23,ierr5, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) DO i=its,itf if(kpbl(i).gt.5)cap_max3(i)=po_cup(i,kpbl(i)) IF(ierr5(I).eq.0.)THEN IF(K23(I).Gt.Kbmax(i))ierr5(i)=2 if(kpbl(i).gt.5)k23(i)=kpbl(i) endif ierr5_0(i)=ierr5(i) ENDDO call cup_kbcon(cap_max_increment,5,k23,kbcon3,he3_cup,hes3_cup, & ierr5,kbmax,po_cup,cap_max3, & ! ierr5,kpbl,po_cup,cap_max3, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_he(k23,hkb3,z3_cup,cd3,mentr_rate3,he3_cup,hc3, & kbcon3,ierr5,dby3,he3,hes3_cup,'shallow', & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_he(k23,hkb3_0,z_cup,cd3,mentr_rate3,he_cup,hc3_0, & kbcon3,ierr5,dby3_0,he,hes_cup,'shallow', & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_ktop(1,dby3,kbcon3,ktop3,ierr5, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_nms(zu3,z3_cup,mentr_rate3,cd3,kbcon3,ktop3, & ierr5,k23, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_nms(zu3_0,z_cup,mentr_rate3,cd3,kbcon3,ktop3, & ierr5,k23, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! ! first calculate aa3_0_cup ! call cup_up_aa0(aa3_0,z,zu3_0,dby3_0,GAMMA3_0_CUP,t_cup, & kbcon3,ktop3,ierr5, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! ! now what is necessary for aa3 and feedbacks ! call cup_up_moisture('shallow',ierr5,z3_cup,qc3,qrc3,pw3,pwav3, & kbcon3,ktop3,cd3,dby3,mentr_rate3,clw_all, & qshall,GAMMA3_cup,zu3,qes3_cup,k23,q3_cup,xl,& itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_aa0(aa3,z3,zu3,dby3,GAMMA3_CUP,t3_cup, & kbcon3,ktop3,ierr5, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! do i=its,itf ! if(ierr5(i).eq.0)then ! if(aa3(i).eq.0.)then ! ierr5(i)=17 ! endif ! endif ! enddo ! call cup_dellabot('shallow',ipr,jpr,q3_cup,ierr5,z3_cup,po,qrcdo,edto, & ! zdo,cdd,q3,dellaq3,dsubq,j,mentrd_rate,z3,g,& ! itf,jtf,ktf, & ! its,ite, jts,jte, kts,kte) call cup_dellas_3d(ierr5,z3_cup,po_cup,hcdo,edt3,zdo3,cdd, & he3,dellah3,dsubt3,j,mentrd_rate,zu3,g, & cd3,hc3,ktop3,k23,kbcon3,mentr_rate3,jmin,he3_cup,kdet, & k23,ipr,jpr,'shallow',0, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_dellas_3d(ierr5,z3_cup,po_cup,qrcdo,edt3,zdo3,cdd, & qshall,dellaq3,dsubq3,j,mentrd_rate,zu3,g, & cd3,qc3,ktop3,k23,kbcon3,mentr_rate3,jmin,q3_cup,kdet, & k23,ipr,jpr,'shallow',0, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) mbdt_s=1.e-1*mbdt_ens(1) do k=kts,ktf do i=its,itf dellat3(i,k)=0. if(ierr5(i).eq.0)then trash=dsubt3(i,k) XHE3(I,K)=(dsubt3(i,k)+DELLAH3(I,K))*MBDT_S+HE3(I,K) XQ3(I,K)=(dsubq3(i,k)+DELLAQ3(I,K))*MBDT_S+QSHALL(I,K) DELLAT3(I,K)=(1./cp)*(DELLAH3(I,K)-xl*DELLAQ3(I,K)) dSUBT3(I,K)=(1./cp)*(dsubt3(i,k)-xl*dsubq3(i,k)) XT3(I,K)= (DELLAT3(I,K)+dsubt3(i,k))*MBDT_S+TSHALL(I,K) IF(XQ3(I,K).LE.0.)XQ3(I,K)=1.E-08 ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)k,trash,DELLAQ3(I,K),dsubq3(I,K),dsubt3(i,k) ! endif ENDIF enddo enddo do i=its,itf if(ierr5(i).eq.0)then XHE3(I,ktf)=HE3(I,ktf) XQ3(I,ktf)=QSHALL(I,ktf) XT3(I,ktf)=TSHALL(I,ktf) IF(XQ3(I,ktf).LE.0.)XQ3(I,ktf)=1.E-08 endif enddo ! !--- calculate moist static energy, heights, qes ! call cup_env(xz3,xqes3,xhe3,xhes3,xt3,xq3,po,z1, & psur,ierr5,tcrit,2,xl,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- environmental values on cloud levels ! call cup_env_clev(xt3,xqes3,xq3,xhe3,xhes3,xz3,po,xqes3_cup,xq3_cup, & xhe3_cup,xhes3_cup,xz3_cup,po_cup,gamma3_cup,xt3_cup,psur, & ierr5,z1,xl,rv,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! ! !**************************** static control ! !--- moist static energy inside cloud ! do i=its,itf if(ierr5(i).eq.0)then xhkb3(i)=xhe3(i,k23(i)) endif enddo call cup_up_he(k23,xhkb3,xz3_cup,cd3,mentr_rate3,xhe3_cup,xhc3, & kbcon3,ierr5,xdby3,xhe3,xhes3_cup,'shallow', & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !c--- normalized mass flux profile and CWF ! call cup_up_nms(xzu3,xz3_cup,mentr_rate3,cd3,kbcon3,ktop3,ierr5,k23, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_up_aa0(xaa3,xz3,xzu3,xdby3,GAMMA3_CUP,xt3_cup, & kbcon3,ktop3,ierr5, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! ! now for shallow forcing ! do i=its,itf xmb3(i)=0. xff_shal(1:9)=0. if(ierr5(i).eq.0)then xkshal=(xaa3(i)-aa3(i))/mbdt_s if(xkshal.gt.0.)xkshal=+1.e6 if(xkshal.gt.-1.e-4 .and. xkshal.lt.0.)xkshal=-1.e-4 xff_shal(1)=max(0.,-(aa3(i)-aa3_0(i))/(xkshal*dtime)) xff_shal(2)=max(0.,-(aa3(i)-aa3_0(i))/(xkshal*dtime)) xff_shal(3)=max(0.,-(aa3(i)-aa3_0(i))/(xkshal*dtime)) if(aa3_0(i).le.0)then xff_shal(1)=0. xff_shal(2)=0. xff_shal(3)=0. endif if(aa3(i)-aa3_0(i).le.0.)then xff_shal(1)=0. xff_shal(2)=0. xff_shal(3)=0. endif ! boundary layer QE (from Saulo Freitas) blqe=0. trash=0. if(k23(i).lt.kpbl(i)+1)then do k=1,kbcon3(i)-1 blqe=blqe+100.*dhdt(i,k)*(p_cup(i,k)-p_cup(i,k+1))/g enddo trash=max((hc3(i,kbcon3(i))-he_cup(i,kbcon3(i))),1.e1) xff_shal(7)=max(0.,blqe/trash) xff_shal(7)=min(0.1,xff_shal(7)) else xff_shal(7)=0. endif if((xkshal.lt.-1.1e-04) .and. & ((aa3(i)-aa3_0(i).gt.0.) .or. (xff_shal(7).gt.0)))then xff_shal(4)=max(0.,-aa3(i)/(xkshal*tscl_KF)) xff_shal(4)=min(0.1,xff_shal(4)) xff_shal(5)=xff_shal(4) xff_shal(6)=xff_shal(4) else xff_shal(4)=0. xff_shal(5)=0. xff_shal(6)=0. endif ! write(0,888)'i0=',i,j,kpbl(i),blqe,xff_shal(7) 888 format(a3,3(1x,i3),2e12.4) xff_shal(8)= xff_shal(7) xff_shal(9)= xff_shal(7) do k=1,9 xmb3(i)=xmb3(i)+xff_shal(k) enddo xmb3(i)=min(.1,xmb3(i)/9.) ! if(xmb3(i).eq.10.1 )then ! write(0,*)'i0,xmb3,blqe,xkshal = ',i,j,xmb3(i),blqe,xkshal ! if(xff_shal(7).ge.0.1)then ! write(0,*)'i1,blqe,trash = ',blqe,trash ! endif ! if(xff_shal(7).eq.0 .and. xff_shal(1).ge.0.1)then ! write(0,*)'i2,aa3_0(i),aa3(i),xaa3(i) = ',aa3_0(i),aa3(i),xaa3(i) ! endif ! if(xff_shal(5).ge.0.1)then ! write(0,*)'i3,aa3(i),a0,xkshal= ',aa3(i),aa3_0(i),xkshal ! endif ! write(0,*)'i0, xff_shallow = ',xff_shal ! endif !! if(xff_shal(7).eq.0 .and. xff_shal(4).gt.0 .and. xmb3(i).eq.0.5)then !! write(0,*)'i4,xmb3 = ',i,j,xmb3(i),xkshal !! write(0,*)'xff_shallow = ',xff_shal !! write(0,*)aa3(i),xaa3(i),blqe !! endif if(xmb3(i).eq.0.)ierr5(i)=22 if(xmb3(i).lt.0.)then ierr5(i)=21 ! write(0,*)'neg xmb,i,j,xmb3 for shallow = ',i,j,k23(i),ktop3(i),kbcon3(i),kpbl(i) endif endif ! if(ierr5(i).eq.0)write(0,*)'i,j,xmb3 for shallow = ',i,j,xmb3(i),k23(i),ktop3(i) ! if(ierr5(i).eq.0.and.i.eq.12.and.j.eq.25)write(0,*)'i,j,xmb3 for shallow = ',k23(i),ktop3(i),kbcon3(i),kpbl(i) ! if(ierr5(i).eq.0)write(0,*)'i,j,xmb3 for shallow = ',i,j,k23(i),ktop3(i),kbcon3(i),kpbl(i) if(ierr5(i).ne.0)then k23(i)=0 kbcon3(i)=0 ktop3(i)=0 xmb3(i)=0 do k=kts,ktf outts(i,k)=0. outqs(i,k)=0. enddo else if(ierr5(i).eq.0)then ! ! got the mass flux, sanity check, first for heating rates ! trash=0. do k=2,ktop3(i) trash=max(trash,86400.*(dsubt3(i,k)+dellat3(i,k))*xmb3(i)) enddo if(trash.gt.150.)xmb3(i)=xmb3(i)*150./trash ! ! sanity check on moisture tendencies: do not allow anything that may allow neg tendencies ! do k=2,ktop3(i) trash=q(i,k)+(dsubq3(i,k)+dellaq3(i,k))*xmb3(i)*dtime if(trash.lt.1.e-12)then ! max allowable tendency over tendency that would lead to too small mix ratios ! trash=((1.e-12-q(i,k))/dtime) & /((dsubq3(i,k)+dellaq3(i,k))*xmb3(i)) trash=max(0.,trash) trash=min(1.,trash) xmb3(i)=trash*xmb3(i) endif enddo ! ! final tendencies ! do k=2,ktop3(i) outts(i,k)=(dsubt3(i,k)+dellat3(i,k))*xmb3(i) outqs(i,k)=(dsubq3(i,k)+dellaq3(i,k))*xmb3(i) enddo endif enddo ! if(j.eq.-25)then !! write(0,*)'!!!!!!!! j = ',j,' !!!!!!!!!!!!!!!!!!!!' i=12 ! write(0,*)k23(i),kbcon3(i),ktop3(i) ! write(0,*)kpbl(i),ierr5(i),ierr(i) ! write(0,*)xmb3(i),xff_shal(1:9) ! write(0,*)xaa3(i),aa1(i),aa0(i),aa3(i) ! do k=1,ktf ! write(0,*)po(i,k),he3(i,k),hes3(i,k),dellah3(i,k) ! enddo ! do k=1,ktf ! write(0,*)zu3(i,k),hc3(i,k),dsubt3(i,k),dellat3(i,k) ! enddo ! do k=1,ktop3(i)+1 ! blqe=cp*outts(i,k)+xl*outqs(i,k) ! write(0,*)outts(i,k),outqs(i,k),blqe ! enddo ! endif ! ! done shallow !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ENDIF !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! call cup_axx(tcrit,kbmax,z1,p,psur,xl,rv,cp,tx,qx,axx,ierr, & cap_max,cap_max_increment,entr_rate,mentr_rate,& j,itf,jtf,ktf, & its,ite, jts,jte, kts,kte,ens4) ! !--- DETERMINE DOWNDRAFT STRENGTH IN TERMS OF WINDSHEAR ! call cup_dd_edt(ierr,us,vs,zo,ktop,kbcon,edt,po,pwavo, & pwevo,edtmax,edtmin,maxens2,edtc, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do 250 iedt=1,maxens2 do i=its,itf if(ierr(i).eq.0)then edt(i)=edtc(i,iedt) edto(i)=edtc(i,iedt) edtx(i)=edtc(i,iedt) edt_out(i,j)=edtc(i,2) if(high_resolution.eq.1)then edt(i)=edtc(i,3) edto(i)=edtc(i,3) edtx(i)=edtc(i,3) edt_out(i,j)=edtc(i,3) endif endif enddo do k=kts,ktf do i=its,itf subt_ens(i,k,iedt)=0. subq_ens(i,k,iedt)=0. dellat_ens(i,k,iedt)=0. dellaq_ens(i,k,iedt)=0. dellaqc_ens(i,k,iedt)=0. pwo_ens(i,k,iedt)=0. enddo enddo ! ! if(j.eq.jpr.and.iedt.eq.1.and.ipr.gt.its.and.ipr.lt.ite)then !! if(j.eq.jpr)then ! i=ipr !! write(0,*)'in 250 loop ',iedt,edt(ipr),ierr(ipr) !! if(ierr(i).eq.0.or.ierr(i).eq.3)then ! write(0,*)'250',k22(I),kbcon(i),ktop(i),jmin(i) ! write(0,*)edt(i),aa0(i),aa1(i) ! do k=kts,ktf ! write(0,*)k,z(i,k),he(i,k),hes(i,k) ! enddo ! write(0,*)'end 250 loop ',iedt,edt(ipr),ierr(ipr) ! do k=1,ktop(i)+1 ! write(0,*)zu(i,k),zd(i,k),pw(i,k),pwd(i,k) ! enddo !! endif ! endif do i=its,itf aad(i)=0. enddo ! !--- change per unit mass that a model cloud would modify the environment ! !--- 1. in bottom layer ! call cup_dellabot('deep',ipr,jpr,heo_cup,ierr,zo_cup,po,hcdo,edto, & zdo,cdd,heo,dellah,dsubt,j,mentrd_rate,zo,g, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_dellabot('deep',ipr,jpr,qo_cup,ierr,zo_cup,po,qrcdo,edto, & zdo,cdd,qo,dellaq,dsubq,j,mentrd_rate,zo,g,& itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- 2. everywhere else ! call cup_dellas_3d(ierr,zo_cup,po_cup,hcdo,edto,zdo,cdd, & heo,dellah,dsubt,j,mentrd_rate,zuo,g, & cd,hco,ktop,k22,kbcon,mentr_rate,jmin,heo_cup,kdet, & k22,ipr,jpr,'deep',high_resolution, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !-- take out cloud liquid water for detrainment ! !?? do k=kts,ktf do k=kts,ktf-1 do i=its,itf scr1(i,k)=0. dellaqc(i,k)=0. if(ierr(i).eq.0)then scr1(i,k)=qco(i,k)-qrco(i,k) if(k.eq.ktop(i)-0)dellaqc(i,k)= & .01*zuo(i,ktop(i))*qrco(i,ktop(i))* & 9.81/(po_cup(i,k)-po_cup(i,k+1)) if(k.lt.ktop(i).and.k.gt.kbcon(i))then dz=zo_cup(i,k+1)-zo_cup(i,k) dellaqc(i,k)=.01*9.81*cd(i,k)*dz*zuo(i,k) & *.5*(qrco(i,k)+qrco(i,k+1))/ & (po_cup(i,k)-po_cup(i,k+1)) endif endif enddo enddo call cup_dellas_3d(ierr,zo_cup,po_cup,qrcdo,edto,zdo,cdd, & qo,dellaq,dsubq,j,mentrd_rate,zuo,g, & cd,qco,ktop,k22,kbcon,mentr_rate,jmin,qo_cup,kdet, & k22,ipr,jpr,'deep',high_resolution, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) ! !--- using dellas, calculate changed environmental profiles ! ! do 200 nens=1,maxens mbdt=mbdt_ens(2) do i=its,itf xaa0_ens(i,1)=0. xaa0_ens(i,2)=0. xaa0_ens(i,3)=0. enddo ! if(j.eq.jpr)then ! write(0,*)'xt',xl,'DELLAH(I,K),DELLAQ(I,K),dsubq(I,K),dsubt(i,k)' ! endif do k=kts,ktf do i=its,itf dellat(i,k)=0. if(ierr(i).eq.0)then trash=dsubt(i,k) XHE(I,K)=(dsubt(i,k)+DELLAH(I,K))*MBDT+HEO(I,K) XQ(I,K)=(dsubq(i,k)+DELLAQ(I,K))*MBDT+QO(I,K) DELLAT(I,K)=(1./cp)*(DELLAH(I,K)-xl*DELLAQ(I,K)) dSUBT(I,K)=(1./cp)*(dsubt(i,k)-xl*dsubq(i,k)) XT(I,K)= (DELLAT(I,K)+dsubt(i,k))*MBDT+TN(I,K) IF(XQ(I,K).LE.0.)XQ(I,K)=1.E-08 ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)k,trash,DELLAQ(I,K),dsubq(I,K),dsubt(i,k) ! endif ENDIF enddo enddo do i=its,itf if(ierr(i).eq.0)then XHE(I,ktf)=HEO(I,ktf) XQ(I,ktf)=QO(I,ktf) XT(I,ktf)=TN(I,ktf) IF(XQ(I,ktf).LE.0.)XQ(I,ktf)=1.E-08 endif enddo ! !--- calculate moist static energy, heights, qes ! call cup_env(xz,xqes,xhe,xhes,xt,xq,po,z1, & psur,ierr,tcrit,2,xl,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- environmental values on cloud levels ! call cup_env_clev(xt,xqes,xq,xhe,xhes,xz,po,xqes_cup,xq_cup, & xhe_cup,xhes_cup,xz_cup,po_cup,gamma_cup,xt_cup,psur, & ierr,z1,xl,rv,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! ! !**************************** static control ! !--- moist static energy inside cloud ! do i=its,itf if(ierr(i).eq.0)then xhkb(i)=xhe(i,k22(i)) endif enddo call cup_up_he(k22,xhkb,xz_cup,cd,mentr_rate,xhe_cup,xhc, & kbcon,ierr,xdby,xhe,xhes_cup,'deep', & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !c--- normalized mass flux profile ! call cup_up_nms(xzu,xz_cup,mentr_rate,cd,kbcon,ktop,ierr,k22, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- moisture downdraft ! call cup_dd_nms(xzd,xz_cup,cdd,mentrd_rate,jmin,ierr, & 1,kdet,z1, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_dd_he(xhes_cup,xzd,xhcd,xz_cup,cdd,mentrd_rate, & jmin,ierr,xhe,dbyd,xhe_cup,& itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_dd_moisture_3d(xzd,xhcd,xhes_cup,xqcd,xqes_cup, & xpwd,xq_cup,xz_cup,cdd,mentrd_rate,jmin,ierr,gamma_cup, & xpwev,bu,xqrcd,xq,xhe,xt_cup,3,xl,high_resolution, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !------- MOISTURE updraft ! call cup_up_moisture('deep',ierr,xz_cup,xqc,xqrc,xpw,xpwav, & kbcon,ktop,cd,xdby,mentr_rate,clw_all, & xq,GAMMA_cup,xzu,xqes_cup,k22,xq_cup,xl, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- workfunctions for updraft ! call cup_up_aa0(xaa0,xz,xzu,xdby,GAMMA_CUP,xt_cup, & kbcon,ktop,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do 200 nens=1,maxens do i=its,itf if(ierr(i).eq.0)then xaa0_ens(i,nens)=xaa0(i) nall=(iens-1)*maxens3*maxens*maxens2 & +(iedt-1)*maxens*maxens3 & +(nens-1)*maxens3 do k=kts,ktf if(k.le.ktop(i))then do nens3=1,maxens3 if(nens3.eq.7)then !--- b=0 pr_ens(i,j,nall+nens3)=pr_ens(i,j,nall+nens3) & +edto(i)*pwdo(i,k) & +pwo(i,k) !--- b=beta else if(nens3.eq.8)then pr_ens(i,j,nall+nens3)=pr_ens(i,j,nall+nens3)+ & pwo(i,k) !--- b=beta/2 else if(nens3.eq.9)then pr_ens(i,j,nall+nens3)=pr_ens(i,j,nall+nens3) & +.5*edto(i)*pwdo(i,k) & + pwo(i,k) else pr_ens(i,j,nall+nens3)=pr_ens(i,j,nall+nens3)+ & pwo(i,k)+edto(i)*pwdo(i,k) endif enddo endif enddo if(pr_ens(i,j,nall+7).lt.1.e-6)then ierr(i)=18 do nens3=1,maxens3 pr_ens(i,j,nall+nens3)=0. enddo endif do nens3=1,maxens3 if(pr_ens(i,j,nall+nens3).lt.1.e-4)then pr_ens(i,j,nall+nens3)=0. endif enddo endif enddo 200 continue ! !--- LARGE SCALE FORCING ! ! !------- CHECK wether aa0 should have been zero ! ! CALL cup_MAXIMI(HEO_CUP,3,KBMAX,K22x,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do i=its,itf ierr2(i)=ierr(i) ierr3(i)=ierr(i) enddo call cup_kbcon(cap_max_increment,2,k22x,kbconx,heo_cup, & heso_cup,ierr2,kbmax,po_cup,cap_max, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) call cup_kbcon(cap_max_increment,3,k22x,kbconx,heo_cup, & heso_cup,ierr3,kbmax,po_cup,cap_max, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- DETERMINE THE LEVEL OF CONVECTIVE CLOUD BASE - KBCON ! call cup_forcing_ens_3d(closure_n,xland1,aa0,aa1,xaa0_ens,mbdt_ens,dtime, & ierr,ierr2,ierr3,xf_ens,j,'deeps',axx, & maxens,iens,iedt,maxens2,maxens3,mconv, & po_cup,ktop,omeg,zdo,k22,zuo,pr_ens,edto,kbcon, & massflx,iact,direction,ensdim,massfln,ichoice,edt_out, & high_resolution,itf,jtf,ktf, & its,ite, jts,jte, kts,kte,ens4,ktau) ! do k=kts,ktf do i=its,itf if(ierr(i).eq.0)then subt_ens(i,k,iedt)=dsubt(i,k) subq_ens(i,k,iedt)=dsubq(i,k) dellat_ens(i,k,iedt)=dellat(i,k) dellaq_ens(i,k,iedt)=dellaq(i,k) dellaqc_ens(i,k,iedt)=dellaqc(i,k) pwo_ens(i,k,iedt)=pwo(i,k)+edt(i)*pwdo(i,k) else subt_ens(i,k,iedt)=0. subq_ens(i,k,iedt)=0. dellat_ens(i,k,iedt)=0. dellaq_ens(i,k,iedt)=0. dellaqc_ens(i,k,iedt)=0. pwo_ens(i,k,iedt)=0. endif ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)'1',iens,iedt,dellat(i,k),dellat_ens(i,k,iedt), & ! dellaq(i,k), dellaqc(i,k) ! write(0,*)'2',k,subt_ens(i,k,iedt),subq_ens(i,k,iedt) ! endif enddo enddo 250 continue ! !--- FEEDBACK ! call cup_output_ens_3d(xf_ens,ierr,dellat_ens,dellaq_ens, & dellaqc_ens,subt_ens,subq_ens,subt,subq,outt, & outq,outqc,zuo,sub_mas,pre,pwo_ens,xmb,ktop, & j,'deep',maxens2,maxens,iens,ierr2,ierr3, & pr_ens,maxens3,ensdim,massfln, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI,closure_n,xland1, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) k=1 do i=its,itf if(ierr(i).eq.0.and.ierr5(i).eq.0.and.kbcon(i).lt.ktop3(i)+1)then ! write(0,*)'both ier and ier5=0 at i,j=',i,j,kbcon(i),ktop3(i) if(high_resolution.eq.1)then outts(i,kts:kte)=0. outqs(i,kts:kte)=0. endif elseif (ierr5(i).eq.0)then ! write(0,*)'ier5=0 at i,j=',i,j,k23(i),ktop3(i) endif PRE(I)=MAX(PRE(I),0.) ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)'i,j,pre(i),aa0(i),aa1(i)' ! write(0,*)i,j,pre(i),aa0(i) ! endif enddo ! !---------------------------done------------------------------ ! ! do i=its,itf ! if(ierr(i).eq.0)then ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)'on output, pre =',pre(i),its,itf,kts,ktf ! do k=kts,ktf ! write(0,*)z(i,k),outt(i,k)*86400.,subt(i,k)*86400. ! enddo ! write(0,*)i,j,(axx(i,k),k=1,ens4) ! endif ! endif ! enddo ! print *,'ierr(i) = ',ierr(i),pre(i) END SUBROUTINE CUP_enss_3d SUBROUTINE cup_dd_aa0(edt,ierr,aa0,jmin,gamma_cup,t_cup, & hcd,hes_cup,z,zd, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! aa0 cloud work function for downdraft ! gamma_cup = gamma on model cloud levels ! t_cup = temperature (Kelvin) on model cloud levels ! hes_cup = saturation moist static energy on model cloud levels ! hcd = moist static energy in downdraft ! edt = epsilon ! zd normalized downdraft mass flux ! z = heights of model levels ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & z,zd,gamma_cup,t_cup,hes_cup,hcd real, dimension (its:ite) & ,intent (in ) :: & edt integer, dimension (its:ite) & ,intent (in ) :: & jmin ! ! input and output ! integer, dimension (its:ite) & ,intent (inout) :: & ierr real, dimension (its:ite) & ,intent (out ) :: & aa0 ! ! local variables in this routine ! integer :: & i,k,kk real :: & dz ! do i=its,itf aa0(i)=0. enddo ! !?? DO k=kts,kte-1 DO k=kts,ktf-1 do i=its,itf IF(ierr(I).eq.0.and.k.lt.jmin(i))then KK=JMIN(I)-K ! !--- ORIGINAL ! DZ=(Z(I,KK)-Z(I,KK+1)) AA0(I)=AA0(I)+zd(i,kk)*EDT(I)*DZ*(9.81/(1004.*T_cup(I,KK))) & *((hcd(i,kk)-hes_cup(i,kk))/(1.+GAMMA_cup(i,kk))) endif enddo enddo END SUBROUTINE CUP_dd_aa0 SUBROUTINE cup_dd_edt(ierr,us,vs,z,ktop,kbcon,edt,p,pwav, & pwev,edtmax,edtmin,maxens2,edtc, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte integer, intent (in ) :: & maxens2 ! ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & us,vs,z,p real, dimension (its:ite,1:maxens2) & ,intent (out ) :: & edtc real, dimension (its:ite) & ,intent (out ) :: & edt real, dimension (its:ite) & ,intent (in ) :: & pwav,pwev real & ,intent (in ) :: & edtmax,edtmin integer, dimension (its:ite) & ,intent (in ) :: & ktop,kbcon integer, dimension (its:ite) & ,intent (inout) :: & ierr ! ! local variables in this routine ! integer i,k,kk real einc,pef,pefb,prezk,zkbc real, dimension (its:ite) :: & vshear,sdp,vws ! !--- DETERMINE DOWNDRAFT STRENGTH IN TERMS OF WINDSHEAR ! ! */ calculate an average wind shear over the depth of the cloud ! do i=its,itf edt(i)=0. vws(i)=0. sdp(i)=0. vshear(i)=0. enddo do k=1,maxens2 do i=its,itf edtc(i,k)=0. enddo enddo do kk = kts,ktf-1 do 62 i=its,itf IF(ierr(i).ne.0)GO TO 62 if (kk .le. min0(ktop(i),ktf) .and. kk .ge. kbcon(i)) then vws(i) = vws(i)+ & (abs((us(i,kk+1)-us(i,kk))/(z(i,kk+1)-z(i,kk))) & + abs((vs(i,kk+1)-vs(i,kk))/(z(i,kk+1)-z(i,kk)))) * & (p(i,kk) - p(i,kk+1)) sdp(i) = sdp(i) + p(i,kk) - p(i,kk+1) endif if (kk .eq. ktf-1)vshear(i) = 1.e3 * vws(i) / sdp(i) 62 continue end do do i=its,itf IF(ierr(i).eq.0)then pef=(1.591-.639*VSHEAR(I)+.0953*(VSHEAR(I)**2) & -.00496*(VSHEAR(I)**3)) if(pef.gt.1.)pef=1. if(pef.lt.0.)pef=0. ! !--- cloud base precip efficiency ! zkbc=z(i,kbcon(i))*3.281e-3 prezk=.02 if(zkbc.gt.3.)then prezk=.96729352+zkbc*(-.70034167+zkbc*(.162179896+zkbc & *(- 1.2569798E-2+zkbc*(4.2772E-4-zkbc*5.44E-6)))) endif if(zkbc.gt.25)then prezk=2.4 endif pefb=1./(1.+prezk) if(pefb.gt.1.)pefb=1. if(pefb.lt.0.)pefb=0. EDT(I)=1.-.5*(pefb+pef) !--- edt here is 1-precipeff! einc=.2*edt(i) do k=1,maxens2 edtc(i,k)=edt(i)+float(k-2)*einc enddo endif enddo do i=its,itf IF(ierr(i).eq.0)then do k=1,maxens2 EDTC(I,K)=-EDTC(I,K)*PWAV(I)/PWEV(I) IF(EDTC(I,K).GT.edtmax)EDTC(I,K)=edtmax IF(EDTC(I,K).LT.edtmin)EDTC(I,K)=edtmin enddo endif enddo END SUBROUTINE cup_dd_edt SUBROUTINE cup_dd_he(hes_cup,zd,hcd,z_cup,cdd,entr, & jmin,ierr,he,dby,he_cup, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! hcd = downdraft moist static energy ! he = moist static energy on model levels ! he_cup = moist static energy on model cloud levels ! hes_cup = saturation moist static energy on model cloud levels ! dby = buoancy term ! cdd= detrainment function ! z_cup = heights of model cloud levels ! entr = entrainment rate ! zd = downdraft normalized mass flux ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & he,he_cup,hes_cup,z_cup,cdd,zd ! entr= entrainment rate real & ,intent (in ) :: & entr integer, dimension (its:ite) & ,intent (in ) :: & jmin ! ! input and output ! ! ierr error value, maybe modified in this routine integer, dimension (its:ite) & ,intent (inout) :: & ierr real, dimension (its:ite,kts:kte) & ,intent (out ) :: & hcd,dby ! ! local variables in this routine ! integer :: & i,k,ki real :: & dz do k=kts+1,ktf do i=its,itf dby(i,k)=0. IF(ierr(I).eq.0)then hcd(i,k)=hes_cup(i,k) endif enddo enddo ! do 100 i=its,itf IF(ierr(I).eq.0)then k=jmin(i) hcd(i,k)=hes_cup(i,k) dby(i,k)=hcd(i,jmin(i))-hes_cup(i,k) ! do ki=jmin(i)-1,1,-1 DZ=Z_cup(i,Ki+1)-Z_cup(i,Ki) HCD(i,Ki)=(HCD(i,Ki+1)*(1.-.5*CDD(i,Ki)*DZ) & +entr*DZ*HE(i,Ki) & )/(1.+entr*DZ-.5*CDD(i,Ki)*DZ) dby(i,ki)=HCD(i,Ki)-hes_cup(i,ki) enddo ! endif !--- end loop over i 100 continue END SUBROUTINE cup_dd_he SUBROUTINE cup_dd_moisture_3d(zd,hcd,hes_cup,qcd,qes_cup, & pwd,q_cup,z_cup,cdd,entr,jmin,ierr, & gamma_cup,pwev,bu,qrcd, & q,he,t_cup,iloop,xl,high_resolution, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte,high_resolution ! cdd= detrainment function ! q = environmental q on model levels ! q_cup = environmental q on model cloud levels ! qes_cup = saturation q on model cloud levels ! hes_cup = saturation h on model cloud levels ! hcd = h in model cloud ! bu = buoancy term ! zd = normalized downdraft mass flux ! gamma_cup = gamma on model cloud levels ! mentr_rate = entrainment rate ! qcd = cloud q (including liquid water) after entrainment ! qrch = saturation q in cloud ! pwd = evaporate at that level ! pwev = total normalized integrated evaoprate (I2) ! entr= entrainment rate ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & zd,t_cup,hes_cup,hcd,qes_cup,q_cup,z_cup,cdd,gamma_cup,q,he real & ,intent (in ) :: & entr,xl integer & ,intent (in ) :: & iloop integer, dimension (its:ite) & ,intent (in ) :: & jmin integer, dimension (its:ite) & ,intent (inout) :: & ierr real, dimension (its:ite,kts:kte) & ,intent (out ) :: & qcd,qrcd,pwd real, dimension (its:ite) & ,intent (out ) :: & pwev,bu ! ! local variables in this routine ! integer :: & i,k,ki real :: & dh,dz,dqeva do i=its,itf bu(i)=0. pwev(i)=0. enddo do k=kts,ktf do i=its,itf qcd(i,k)=0. qrcd(i,k)=0. pwd(i,k)=0. enddo enddo ! ! ! do 100 i=its,itf IF(ierr(I).eq.0)then k=jmin(i) DZ=Z_cup(i,K+1)-Z_cup(i,K) qcd(i,k)=q_cup(i,k) if(high_resolution.eq.1)qcd(i,k)=.5*(qes_cup(i,k)+q_cup(i,k)) qrcd(i,k)=qes_cup(i,k) pwd(i,jmin(i))=min(0.,qcd(i,k)-qrcd(i,k)) pwev(i)=pwev(i)+pwd(i,jmin(i)) qcd(i,k)=qes_cup(i,k) ! DH=HCD(I,k)-HES_cup(I,K) bu(i)=dz*dh do ki=jmin(i)-1,1,-1 DZ=Z_cup(i,Ki+1)-Z_cup(i,Ki) QCD(i,Ki)=(qCD(i,Ki+1)*(1.-.5*CDD(i,Ki)*DZ) & +entr*DZ*q(i,Ki) & )/(1.+entr*DZ-.5*CDD(i,Ki)*DZ) ! !--- to be negatively buoyant, hcd should be smaller than hes! ! DH=HCD(I,ki)-HES_cup(I,Ki) bu(i)=bu(i)+dz*dh QRCD(I,Ki)=qes_cup(i,ki)+(1./XL)*(GAMMA_cup(i,ki) & /(1.+GAMMA_cup(i,ki)))*DH dqeva=qcd(i,ki)-qrcd(i,ki) if(dqeva.gt.0.)dqeva=0. pwd(i,ki)=zd(i,ki)*dqeva qcd(i,ki)=qrcd(i,ki) pwev(i)=pwev(i)+pwd(i,ki) ! if(iloop.eq.1.and.i.eq.102.and.j.eq.62)then ! print *,'in cup_dd_moi ', hcd(i,ki),HES_cup(I,Ki),dh,dqeva ! endif enddo ! !--- end loop over i if(pwev(I).eq.0.and.iloop.eq.1)then ! print *,'problem with buoy in cup_dd_moisture',i ierr(i)=7 endif if(BU(I).GE.0.and.iloop.eq.1)then ! print *,'problem with buoy in cup_dd_moisture',i ierr(i)=7 endif endif 100 continue END SUBROUTINE cup_dd_moisture_3d SUBROUTINE cup_dd_nms(zd,z_cup,cdd,entr,jmin,ierr, & itest,kdet,z1, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! z_cup = height of cloud model level ! z1 = terrain elevation ! entr = downdraft entrainment rate ! jmin = downdraft originating level ! kdet = level above ground where downdraft start detraining ! itest = flag to whether to calculate cdd real, dimension (its:ite,kts:kte) & ,intent (in ) :: & z_cup real, dimension (its:ite) & ,intent (in ) :: & z1 real & ,intent (in ) :: & entr integer, dimension (its:ite) & ,intent (in ) :: & jmin,kdet integer & ,intent (in ) :: & itest ! ! input and output ! ! ierr error value, maybe modified in this routine integer, dimension (its:ite) & ,intent (inout) :: & ierr ! zd is the normalized downdraft mass flux ! cdd is the downdraft detrainmen function real, dimension (its:ite,kts:kte) & ,intent (out ) :: & zd real, dimension (its:ite,kts:kte) & ,intent (inout) :: & cdd ! ! local variables in this routine ! integer :: & i,k,ki real :: & a,perc,dz ! !--- perc is the percentage of mass left when hitting the ground ! perc=.03 do k=kts,ktf do i=its,itf zd(i,k)=0. if(itest.eq.0)cdd(i,k)=0. enddo enddo a=1.-perc ! ! ! do 100 i=its,itf IF(ierr(I).eq.0)then zd(i,jmin(i))=1. ! !--- integrate downward, specify detrainment(cdd)! ! do ki=jmin(i)-1,1,-1 DZ=Z_cup(i,Ki+1)-Z_cup(i,Ki) if(ki.le.kdet(i).and.itest.eq.0)then cdd(i,ki)=entr+(1.- (a*(z_cup(i,ki)-z1(i)) & +perc*(z_cup(i,kdet(i))-z1(i)) ) & /(a*(z_cup(i,ki+1)-z1(i)) & +perc*(z_cup(i,kdet(i))-z1(i))))/dz endif zd(i,ki)=zd(i,ki+1)*(1.+(entr-cdd(i,ki))*dz) enddo ! endif !--- end loop over i 100 continue END SUBROUTINE cup_dd_nms SUBROUTINE cup_dellabot(name,ipr,jpr,he_cup,ierr,z_cup,p_cup, & hcd,edt,zd,cdd,he,della,subs,j,mentrd_rate,z,g, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte integer, intent (in ) :: & j,ipr,jpr character *(*), intent (in) :: & name ! ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,kts:kte) & ,intent (out ) :: & della,subs real, dimension (its:ite,kts:kte) & ,intent (in ) :: & z_cup,p_cup,hcd,zd,cdd,he,z,he_cup real, dimension (its:ite) & ,intent (in ) :: & edt real & ,intent (in ) :: & g,mentrd_rate integer, dimension (its:ite) & ,intent (inout) :: & ierr ! ! local variables in this routine ! integer i real detdo,detdo1,detdo2,entdo,dp,dz,subin, & totmas ! ! ! if(name.eq.'shallow')then ! edt(:)=0. ! cdd(:,:)=0. ! endif do 100 i=its,itf della(i,1)=0. subs(i,1)=0. if(ierr(i).ne.0)go to 100 dz=z_cup(i,2)-z_cup(i,1) DP=100.*(p_cup(i,1)-P_cup(i,2)) detdo1=edt(i)*zd(i,2)*CDD(i,1)*DZ detdo2=edt(i)*zd(i,1) entdo=edt(i)*zd(i,2)*mentrd_rate*dz subin=-EDT(I)*zd(i,2) detdo=detdo1+detdo2-entdo+subin DELLA(I,1)=(detdo1*.5*(HCD(i,1)+HCD(i,2)) & +detdo2*hcd(i,1) & +subin*he_cup(i,2) & -entdo*he(i,1))*g/dp SUBS(I,1)=0. ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)'db1',della(i,1),subs(i,1),subin,entdo ! write(0,*)'db2',detdo1,detdo2,detdo1+detdo2-entdo+subin ! endif 100 CONTINUE END SUBROUTINE cup_dellabot SUBROUTINE cup_dellas_3d(ierr,z_cup,p_cup,hcd,edt,zd,cdd, & he,della,subs,j,mentrd_rate,zu,g, & cd,hc,ktop,k22,kbcon,mentr_rate,jmin,he_cup,kdet,kpbl, & ipr,jpr,name,high_res, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte integer, intent (in ) :: & j,ipr,jpr,high_res ! ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,kts:kte) & ,intent (out ) :: & della,subs real, dimension (its:ite,kts:kte) & ,intent (in ) :: & z_cup,p_cup,hcd,zd,cdd,he,hc,cd,zu,he_cup real, dimension (its:ite) & ,intent (in ) :: & edt real & ,intent (in ) :: & g,mentrd_rate,mentr_rate integer, dimension (its:ite) & ,intent (in ) :: & kbcon,ktop,k22,jmin,kdet,kpbl integer, dimension (its:ite) & ,intent (inout) :: & ierr character *(*), intent (in) :: & name ! ! local variables in this routine ! integer i,k,kstart real detdo1,detdo2,entdo,dp,dz,subin,detdo,entup, & detup,subdown,entdoj,entupk,detupk,totmas ! i=ipr kstart=kts+1 if(name.eq.'shallow')kstart=kts DO K=kstart,ktf do i=its,itf della(i,k)=0. subs(i,k)=0. enddo enddo ! ! no downdrafts for shallow convection ! DO 100 k=kts+1,ktf-1 DO 100 i=its,ite IF(ierr(i).ne.0)GO TO 100 IF(K.Gt.KTOP(I))GO TO 100 if(k.lt.k22(i)-1.and.name.eq.'shallow')GO TO 100 ! !--- SPECIFY DETRAINMENT OF DOWNDRAFT, HAS TO BE CONSISTENT !--- WITH ZD CALCULATIONS IN SOUNDD. ! DZ=Z_cup(I,K+1)-Z_cup(I,K) detdo=edt(i)*CDD(i,K)*DZ*ZD(i,k+1) entdo=edt(i)*mentrd_rate*dz*zd(i,k+1) !3d subin=zu(i,k+1)-zd(i,k+1)*edt(i) subin=-zd(i,k+1)*edt(i) entup=0. detup=0. if(k.ge.kbcon(i).and.k.lt.ktop(i))then entup=mentr_rate*dz*zu(i,k) detup=CD(i,K+1)*DZ*ZU(i,k) endif !3d subdown=(zu(i,k)-zd(i,k)*edt(i)) subdown=-zd(i,k)*edt(i) entdoj=0. entupk=0. detupk=0. ! if(k.eq.jmin(i))then entdoj=edt(i)*zd(i,k) endif if(k.eq.k22(i)-1)then entupk=zu(i,kpbl(i)) subin=zu(i,k+1)-zd(i,k+1)*edt(i) if(high_res.eq.1)subin=-zd(i,k+1)*edt(i) ! subin=-zd(i,k+1)*edt(i) endif if(k.gt.kdet(i))then detdo=0. endif if(k.eq.ktop(i)-0)then detupk=zu(i,ktop(i)) subin=0. ! ! this subsidene for ktop now in subs term! ! subdown=zu(i,k) subdown=0. endif if(k.lt.kbcon(i))then detup=0. endif !C !C--- CHANGED DUE TO SUBSIDENCE AND ENTRAINMENT !C totmas=subin-subdown+detup-entup-entdo+ & detdo-entupk-entdoj+detupk ! if(j.eq.jpr.and.i.eq.ipr)print *,'k,totmas,sui,sud = ',k, ! 1 totmas,subin,subdown ! if(j.eq.jpr.and.i.eq.ipr)print *,'updr stuff = ',detup, ! 1 entup,entupk,detupk ! if(j.eq.jpr.and.i.eq.ipr)print *,'dddr stuff = ',entdo, ! 1 detdo,entdoj if(abs(totmas).gt.1.e-6)then ! print *,'*********************',i,j,k,totmas,name ! print *,kpbl(i),k22(i),kbcon(i),ktop(i) !c print *,'updr stuff = ',subin, !c 1 subdown,detup,entup,entupk,detupk !c print *,'dddr stuff = ',entdo, !c 1 detdo,entdoj ! call wrf_error_fatal ( 'totmas .gt.1.e-6' ) endif dp=100.*(p_cup(i,k-1)-p_cup(i,k)) della(i,k)=(detup*.5*(HC(i,K+1)+HC(i,K)) & +detdo*.5*(HCD(i,K+1)+HCD(i,K)) & -entup*he(i,k) & -entdo*he(i,k) & +subin*he_cup(i,k+1) & -subdown*he_cup(i,k) & +detupk*(hc(i,ktop(i))-he_cup(i,ktop(i))) & -entupk*he_cup(i,k22(i)) & -entdoj*he_cup(i,jmin(i)) & )*g/dp if(high_res.eq.1)then ! the first term includes entr and detr into/from updraft as well as (entup-detup)*he(i,k) from ! neighbouring point, to make things mass consistent.... ! if(k.ge.k22(i))then della(i,k)=( & detup*.5*(HC(i,K+1)+HC(i,K))-entup*he(i,k)+(entup-detup)*he(i,k) & +detdo*.5*(HCD(i,K+1)+HCD(i,K)) & -entdo*he(i,k) & +subin*he_cup(i,k+1) & -subdown*he_cup(i,k) & +detupk*(hc(i,ktop(i))-he(i,ktop(i))) & -entdoj*he_cup(i,jmin(i)) & -entupk*he_cup(i,k22(i))+entupk*he(i,k) & )*g/dp ! else if(k.eq.k22(i)-1)then ! della(i,k)=(-entupk*he_cup(i,k22(i))+entupk*he(i,k))*g/dp endif !3d subin=zu(i,k+1)-zd(i,k+1)*edt(i) ! ! updraft subsidence only ! if(k.ge.k22(i).and.k.lt.ktop(i))then subs(i,k)=(zu(i,k+1)*he_cup(i,k+1) & -zu(i,k)*he_cup(i,k))*g/dp ! else if(k.eq.ktop(i))then ! subs(i,k)=-detupk*he_cup(i,k)*g/dp endif ! ! in igh res case, subsidence terms are for meighbouring points only. This has to be ! done mass consistent with the della term if(high_res.eq.1)then if(k.ge.k22(i).and.k.lt.ktop(i))then subs(i,k)=(zu(i,k+1)*he_cup(i,k+1)-zu(i,k)*he_cup(i,k)-(entup-detup)*he(i,k))*g/dp else if(k.eq.ktop(i))then subs(i,k)=detupk*(he(i,ktop(i))-he_cup(i,ktop(i)))*g/dp else if(k.eq.k22(i)-1)then subs(i,k)=(entupk*he(i,k)-entupk*he_cup(i,k))*g/dp endif endif ! if(i.eq.ipr.and.j.eq.jpr)then ! write(0,*)'d',k,della(i,k),subs(i,k),subin,subdown !! write(0,*)'d',detup,entup,entdo,entupk,entdoj !! print *,k,della(i,k),subin*he_cup(i,k+1),subdown*he_cup(i,k), !! 1 detdo*.5*(HCD(i,K+1)+HCD(i,K)) !! print *,k,detup*.5*(HC(i,K+1)+HC(i,K)),detupk*hc(i,ktop(i)), !! 1 entup*he(i,k),entdo*he(i,k) !! print *,k,he_cup(i,k+1),he_cup(i,k),entupk*he_cup(i,k) ! endif 100 CONTINUE END SUBROUTINE cup_dellas_3d SUBROUTINE cup_direction2(i,j,dir,id,massflx, & iresult,imass,massfld, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte integer, intent (in ) :: & i,j,imass integer, intent (out ) :: & iresult ! ! ierr error value, maybe modified in this routine ! integer, dimension (its:ite,jts:jte) & ,intent (in ) :: & id real, dimension (its:ite,jts:jte) & ,intent (in ) :: & massflx real, dimension (its:ite) & ,intent (inout) :: & dir real & ,intent (out ) :: & massfld ! ! local variables in this routine ! integer k,ia,ja,ib,jb real diff ! ! ! if(imass.eq.1)then massfld=massflx(i,j) endif iresult=0 ! return diff=22.5 if(dir(i).lt.22.5)dir(i)=360.+dir(i) if(id(i,j).eq.1)iresult=1 ! ja=max(2,j-1) ! ia=max(2,i-1) ! jb=min(mjx-1,j+1) ! ib=min(mix-1,i+1) ja=j-1 ia=i-1 jb=j+1 ib=i+1 if(dir(i).gt.90.-diff.and.dir(i).le.90.+diff)then !--- steering flow from the east if(id(ib,j).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(ib,j),massflx(i,j)) endif return endif else if(dir(i).gt.135.-diff.and.dir(i).le.135.+diff)then !--- steering flow from the south-east if(id(ib,ja).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(ib,ja),massflx(i,j)) endif return endif !--- steering flow from the south else if(dir(i).gt.180.-diff.and.dir(i).le.180.+diff)then if(id(i,ja).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(i,ja),massflx(i,j)) endif return endif !--- steering flow from the south west else if(dir(i).gt.225.-diff.and.dir(i).le.225.+diff)then if(id(ia,ja).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(ia,ja),massflx(i,j)) endif return endif !--- steering flow from the west else if(dir(i).gt.270.-diff.and.dir(i).le.270.+diff)then if(id(ia,j).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(ia,j),massflx(i,j)) endif return endif !--- steering flow from the north-west else if(dir(i).gt.305.-diff.and.dir(i).le.305.+diff)then if(id(ia,jb).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(ia,jb),massflx(i,j)) endif return endif !--- steering flow from the north else if(dir(i).gt.360.-diff.and.dir(i).le.360.+diff)then if(id(i,jb).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(i,jb),massflx(i,j)) endif return endif !--- steering flow from the north-east else if(dir(i).gt.45.-diff.and.dir(i).le.45.+diff)then if(id(ib,jb).eq.1)then iresult=1 if(imass.eq.1)then massfld=max(massflx(ib,jb),massflx(i,j)) endif return endif endif END SUBROUTINE cup_direction2 SUBROUTINE cup_env(z,qes,he,hes,t,q,p,z1, & psur,ierr,tcrit,itest,xl,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! ! ierr error value, maybe modified in this routine ! q = environmental mixing ratio ! qes = environmental saturation mixing ratio ! t = environmental temp ! tv = environmental virtual temp ! p = environmental pressure ! z = environmental heights ! he = environmental moist static energy ! hes = environmental saturation moist static energy ! psur = surface pressure ! z1 = terrain elevation ! ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & p,t,q real, dimension (its:ite,kts:kte) & ,intent (out ) :: & he,hes,qes real, dimension (its:ite,kts:kte) & ,intent (inout) :: & z real, dimension (its:ite) & ,intent (in ) :: & psur,z1 real & ,intent (in ) :: & xl,cp integer, dimension (its:ite) & ,intent (inout) :: & ierr integer & ,intent (in ) :: & itest ! ! local variables in this routine ! integer :: & i,k,iph real, dimension (1:2) :: AE,BE,HT real, dimension (its:ite,kts:kte) :: tv real :: tcrit,e,tvbar HT(1)=XL/CP HT(2)=2.834E6/CP BE(1)=.622*HT(1)/.286 AE(1)=BE(1)/273.+ALOG(610.71) BE(2)=.622*HT(2)/.286 AE(2)=BE(2)/273.+ALOG(610.71) ! print *, 'TCRIT = ', tcrit,its,ite DO k=kts,ktf do i=its,itf if(ierr(i).eq.0)then !Csgb - IPH is for phase, dependent on TCRIT (water or ice) IPH=1 IF(T(I,K).LE.TCRIT)IPH=2 ! print *, 'AE(IPH),BE(IPH) = ',AE(IPH),BE(IPH),AE(IPH)-BE(IPH),T(i,k),i,k E=EXP(AE(IPH)-BE(IPH)/T(I,K)) ! print *, 'P, E = ', P(I,K), E QES(I,K)=.622*E/(100.*P(I,K)-E) IF(QES(I,K).LE.1.E-08)QES(I,K)=1.E-08 IF(QES(I,K).LT.Q(I,K))QES(I,K)=Q(I,K) ! IF(Q(I,K).GT.QES(I,K))Q(I,K)=QES(I,K) TV(I,K)=T(I,K)+.608*Q(I,K)*T(I,K) endif enddo enddo ! !--- z's are calculated with changed h's and q's and t's !--- if itest=2 ! if(itest.ne.2)then do i=its,itf if(ierr(i).eq.0)then Z(I,1)=max(0.,Z1(I))-(ALOG(P(I,1))- & ALOG(PSUR(I)))*287.*TV(I,1)/9.81 endif enddo ! --- calculate heights DO K=kts+1,ktf do i=its,itf if(ierr(i).eq.0)then TVBAR=.5*TV(I,K)+.5*TV(I,K-1) Z(I,K)=Z(I,K-1)-(ALOG(P(I,K))- & ALOG(P(I,K-1)))*287.*TVBAR/9.81 endif enddo enddo else do k=kts,ktf do i=its,itf if(ierr(i).eq.0)then z(i,k)=(he(i,k)-1004.*t(i,k)-2.5e6*q(i,k))/9.81 z(i,k)=max(1.e-3,z(i,k)) endif enddo enddo endif ! !--- calculate moist static energy - HE ! saturated moist static energy - HES ! DO k=kts,ktf do i=its,itf if(ierr(i).eq.0)then if(itest.eq.0)HE(I,K)=9.81*Z(I,K)+1004.*T(I,K)+2.5E06*Q(I,K) HES(I,K)=9.81*Z(I,K)+1004.*T(I,K)+2.5E06*QES(I,K) IF(HE(I,K).GE.HES(I,K))HE(I,K)=HES(I,K) endif enddo enddo END SUBROUTINE cup_env SUBROUTINE cup_env_clev(t,qes,q,he,hes,z,p,qes_cup,q_cup, & he_cup,hes_cup,z_cup,p_cup,gamma_cup,t_cup,psur, & ierr,z1,xl,rv,cp, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! ! ierr error value, maybe modified in this routine ! q = environmental mixing ratio ! q_cup = environmental mixing ratio on cloud levels ! qes = environmental saturation mixing ratio ! qes_cup = environmental saturation mixing ratio on cloud levels ! t = environmental temp ! t_cup = environmental temp on cloud levels ! p = environmental pressure ! p_cup = environmental pressure on cloud levels ! z = environmental heights ! z_cup = environmental heights on cloud levels ! he = environmental moist static energy ! he_cup = environmental moist static energy on cloud levels ! hes = environmental saturation moist static energy ! hes_cup = environmental saturation moist static energy on cloud levels ! gamma_cup = gamma on cloud levels ! psur = surface pressure ! z1 = terrain elevation ! ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & qes,q,he,hes,z,p,t real, dimension (its:ite,kts:kte) & ,intent (out ) :: & qes_cup,q_cup,he_cup,hes_cup,z_cup,p_cup,gamma_cup,t_cup real, dimension (its:ite) & ,intent (in ) :: & psur,z1 real & ,intent (in ) :: & xl,rv,cp integer, dimension (its:ite) & ,intent (inout) :: & ierr ! ! local variables in this routine ! integer :: & i,k do k=kts+1,ktf do i=its,itf if(ierr(i).eq.0)then qes_cup(i,k)=.5*(qes(i,k-1)+qes(i,k)) q_cup(i,k)=.5*(q(i,k-1)+q(i,k)) hes_cup(i,k)=.5*(hes(i,k-1)+hes(i,k)) he_cup(i,k)=.5*(he(i,k-1)+he(i,k)) if(he_cup(i,k).gt.hes_cup(i,k))he_cup(i,k)=hes_cup(i,k) z_cup(i,k)=.5*(z(i,k-1)+z(i,k)) p_cup(i,k)=.5*(p(i,k-1)+p(i,k)) t_cup(i,k)=.5*(t(i,k-1)+t(i,k)) gamma_cup(i,k)=(xl/cp)*(xl/(rv*t_cup(i,k) & *t_cup(i,k)))*qes_cup(i,k) endif enddo enddo do i=its,itf if(ierr(i).eq.0)then qes_cup(i,1)=qes(i,1) q_cup(i,1)=q(i,1) hes_cup(i,1)=hes(i,1) he_cup(i,1)=he(i,1) z_cup(i,1)=.5*(z(i,1)+z1(i)) p_cup(i,1)=.5*(p(i,1)+psur(i)) t_cup(i,1)=t(i,1) gamma_cup(i,1)=xl/cp*(xl/(rv*t_cup(i,1) & *t_cup(i,1)))*qes_cup(i,1) endif enddo END SUBROUTINE cup_env_clev SUBROUTINE cup_forcing_ens_3d(closure_n,xland,aa0,aa1,xaa0,mbdt,dtime,ierr,ierr2,ierr3,& xf_ens,j,name,axx,maxens,iens,iedt,maxens2,maxens3,mconv, & p_cup,ktop,omeg,zd,k22,zu,pr_ens,edt,kbcon,massflx, & iact_old_gr,dir,ensdim,massfln,icoic,edt_out, & high_resolution,itf,jtf,ktf, & its,ite, jts,jte, kts,kte,ens4,ktau ) IMPLICIT NONE integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte,ens4,high_resolution,ktau integer, intent (in ) :: & j,ensdim,maxens,iens,iedt,maxens2,maxens3 ! ! ierr error value, maybe modified in this routine ! pr_ens = precipitation ensemble ! xf_ens = mass flux ensembles ! massfln = downdraft mass flux ensembles used in next timestep ! omeg = omega from large scale model ! mconv = moisture convergence from large scale model ! zd = downdraft normalized mass flux ! zu = updraft normalized mass flux ! aa0 = cloud work function without forcing effects ! aa1 = cloud work function with forcing effects ! xaa0 = cloud work function with cloud effects (ensemble dependent) ! edt = epsilon ! dir = "storm motion" ! mbdt = arbitrary numerical parameter ! dtime = dt over which forcing is applied ! iact_gr_old = flag to tell where convection was active ! kbcon = LFC of parcel from k22 ! k22 = updraft originating level ! icoic = flag if only want one closure (usually set to zero!) ! name = deep or shallow convection flag ! real, dimension (its:ite,jts:jte,1:ensdim) & ,intent (inout) :: & pr_ens real, dimension (its:ite,jts:jte,1:ensdim) & ,intent (out ) :: & xf_ens,massfln real, dimension (its:ite,jts:jte) & ,intent (inout ) :: & edt_out real, dimension (its:ite,jts:jte) & ,intent (in ) :: & massflx real, dimension (its:ite,kts:kte) & ,intent (in ) :: & zd,zu,p_cup real, dimension (its:ite,kts:kte,1:ens4) & ,intent (in ) :: & omeg real, dimension (its:ite,1:maxens) & ,intent (in ) :: & xaa0 real, dimension (its:ite) & ,intent (in ) :: & aa1,edt,dir,xland real, dimension (its:ite,1:ens4) & ,intent (in ) :: & mconv,axx real, dimension (its:ite) & ,intent (inout) :: & aa0,closure_n real, dimension (1:maxens) & ,intent (in ) :: & mbdt real & ,intent (in ) :: & dtime integer, dimension (its:ite,jts:jte) & ,intent (in ) :: & iact_old_gr integer, dimension (its:ite) & ,intent (in ) :: & k22,kbcon,ktop integer, dimension (its:ite) & ,intent (inout) :: & ierr,ierr2,ierr3 integer & ,intent (in ) :: & icoic character *(*), intent (in) :: & name ! ! local variables in this routine ! real, dimension (1:maxens3) :: & xff_ens3 real, dimension (1:maxens) :: & xk integer :: & i,k,nall,n,ne,nens,nens3,iresult,iresultd,iresulte,mkxcrt,kclim parameter (mkxcrt=15) real :: & fens4,a1,massfld,a_ave,xff0,xff00,xxx,xomg,aclim1,aclim2,aclim3,aclim4 real, dimension(1:mkxcrt) :: & pcrit,acrit,acritt integer :: nall2,ixxx,irandom integer, dimension (12) :: seed DATA PCRIT/850.,800.,750.,700.,650.,600.,550.,500.,450.,400., & 350.,300.,250.,200.,150./ DATA ACRIT/.0633,.0445,.0553,.0664,.075,.1082,.1521,.2216, & .3151,.3677,.41,.5255,.7663,1.1686,1.6851/ ! GDAS DERIVED ACRIT DATA ACRITT/.203,.515,.521,.566,.625,.665,.659,.688, & .743,.813,.886,.947,1.138,1.377,1.896/ ! seed=0 seed(2)=j seed(3)=ktau nens=0 irandom=1 if(high_resolution.eq.1)irandom=0 irandom=0 fens4=float(ens4) !--- LARGE SCALE FORCING ! DO 100 i=its,itf if(name.eq.'deeps'.and.ierr(i).gt.995)then aa0(i)=0. ierr(i)=0 endif IF(ierr(i).eq.0)then ! !--- ! if(name.eq.'deeps')then ! a_ave=0. do ne=1,ens4 a_ave=a_ave+axx(i,ne) enddo a_ave=max(0.,a_ave/fens4) a_ave=min(a_ave,aa1(i)) a_ave=max(0.,a_ave) do ne=1,16 xff_ens3(ne)=0. enddo xff0= (AA1(I)-AA0(I))/DTIME if(high_resolution.eq.1)xff0= (a_ave-AA0(I))/DTIME xff_ens3(1)=(AA1(I)-AA0(I))/dtime xff_ens3(2)=(a_ave-AA0(I))/dtime if(irandom.eq.1)then seed(1)=i call random_seed (PUT=seed) call random_number (xxx) ixxx=min(ens4,max(1,int(fens4*xxx+1.e-8))) xff_ens3(3)=(axx(i,ixxx)-AA0(I))/dtime call random_number (xxx) ixxx=min(ens4,max(1,int(fens4*xxx+1.e-8))) xff_ens3(13)=(axx(i,ixxx)-AA0(I))/dtime else xff_ens3(3)=(AA1(I)-AA0(I))/dtime xff_ens3(13)=(AA1(I)-AA0(I))/dtime endif if(high_resolution.eq.1)then xff_ens3(1)=(a_ave-AA0(I))/dtime xff_ens3(2)=(a_ave-AA0(I))/dtime xff_ens3(3)=(a_ave-AA0(I))/dtime xff_ens3(13)=(a_ave-AA0(I))/dtime endif ! !--- more original Arakawa-Schubert (climatologic value of aa0) ! ! !--- omeg is in bar/s, mconv done with omeg in Pa/s ! more like Brown (1979), or Frank-Cohen (199?) ! xff_ens3(14)=0. do ne=1,ens4 xff_ens3(14)=xff_ens3(14)-omeg(i,k22(i),ne)/(fens4*9.81) enddo if(xff_ens3(14).lt.0.)xff_ens3(14)=0. xff_ens3(5)=0. do ne=1,ens4 xff_ens3(5)=xff_ens3(5)-omeg(i,kbcon(i),ne)/(fens4*9.81) enddo if(xff_ens3(5).lt.0.)xff_ens3(5)=0. ! ! minimum below kbcon ! if(high_resolution.eq.0)then xff_ens3(4)=-omeg(i,2,1)/9.81 do k=2,kbcon(i)-1 do ne=1,ens4 xomg=-omeg(i,k,ne)/9.81 if(xomg.lt.xff_ens3(4))xff_ens3(4)=xomg enddo enddo if(xff_ens3(4).lt.0.)xff_ens3(4)=0. ! ! max below kbcon xff_ens3(6)=-omeg(i,2,1)/9.81 do k=2,kbcon(i)-1 do ne=1,ens4 xomg=-omeg(i,k,ne)/9.81 if(xomg.gt.xff_ens3(6))xff_ens3(6)=xomg enddo enddo if(xff_ens3(6).lt.0.)xff_ens3(6)=0. endif if(high_resolution.eq.1)then xff_ens3(5)=min(xff_ens3(5),xff_ens3(14)) xff_ens3(4)=xff_ens3(5) xff_ens3(6)=xff_ens3(5) endif ! !--- more like Krishnamurti et al.; pick max and average values ! xff_ens3(7)=mconv(i,1) xff_ens3(8)=mconv(i,1) xff_ens3(9)=mconv(i,1) if(ens4.gt.1)then do ne=2,ens4 if (mconv(i,ne).gt.xff_ens3(7))xff_ens3(7)=mconv(i,ne) enddo do ne=2,ens4 if (mconv(i,ne).lt.xff_ens3(8))xff_ens3(8)=mconv(i,ne) enddo do ne=2,ens4 xff_ens3(9)=xff_ens3(9)+mconv(i,ne) enddo xff_ens3(9)=xff_ens3(9)/fens4 endif if(high_resolution.eq.1)then xff_ens3(7)=xff_ens3(9) xff_ens3(8)=xff_ens3(9) xff_ens3(15)=xff_ens3(9) endif ! if(high_resolution.eq.0)then if(irandom.eq.1)then seed(1)=i call random_seed (PUT=seed) call random_number (xxx) ixxx=min(ens4,max(1,int(fens4*xxx+1.e-8))) xff_ens3(15)=mconv(i,ixxx) else xff_ens3(15)=mconv(i,1) endif endif ! !--- more like Fritsch Chappel or Kain Fritsch (plus triggers) ! xff_ens3(10)=A_AVE/(60.*40.) xff_ens3(11)=AA1(I)/(60.*40.) if(irandom.eq.1)then seed(1)=i call random_seed (PUT=seed) call random_number (xxx) ixxx=min(ens4,max(1,int(fens4*xxx+1.e-8))) xff_ens3(12)=AXX(I,ixxx)/(60.*40.) else xff_ens3(12)=AA1(I)/(60.*40.) endif if(high_resolution.eq.1)then xff_ens3(11)=xff_ens3(10) xff_ens3(12)=xff_ens3(10) endif ! !--- more original Arakawa-Schubert (climatologic value of aa0) ! ! edt_out(i,j)=xff0 if(icoic.eq.0)then if(xff0.lt.0.)then xff_ens3(1)=0. xff_ens3(2)=0. xff_ens3(3)=0. xff_ens3(13)=0. xff_ens3(10)=0. xff_ens3(11)=0. xff_ens3(12)=0. endif endif do nens=1,maxens XK(nens)=(XAA0(I,nens)-AA1(I))/MBDT(2) if(xk(nens).le.0.and.xk(nens).gt.-1.e-6) & xk(nens)=-1.e-6 if(xk(nens).gt.0.and.xk(nens).lt.1.e-6) & xk(nens)=1.e-6 enddo ! !--- add up all ensembles ! do 350 ne=1,maxens ! !--- for every xk, we have maxens3 xffs !--- iens is from outermost ensemble (most expensive! ! !--- iedt (maxens2 belongs to it) !--- is from second, next outermost, not so expensive ! !--- so, for every outermost loop, we have maxens*maxens2*3 !--- ensembles!!! nall would be 0, if everything is on first !--- loop index, then ne would start counting, then iedt, then iens.... ! iresult=0 iresultd=0 iresulte=0 nall=(iens-1)*maxens3*maxens*maxens2 & +(iedt-1)*maxens*maxens3 & +(ne-1)*maxens3 ! ! over water, enfor!e small cap for some of the closures ! if(xland(i).lt.0.1)then if(ierr2(i).gt.0.or.ierr3(i).gt.0)then xff_ens3(1) =0. massfln(i,j,nall+1)=0. xff_ens3(2) =0. massfln(i,j,nall+2)=0. xff_ens3(3) =0. massfln(i,j,nall+3)=0. xff_ens3(10) =0. massfln(i,j,nall+10)=0. xff_ens3(11) =0. massfln(i,j,nall+11)=0. xff_ens3(12) =0. massfln(i,j,nall+12)=0. xff_ens3(7) =0. massfln(i,j,nall+7)=0. xff_ens3(8) =0. massfln(i,j,nall+8)=0. xff_ens3(9) =0. massfln(i,j,nall+9)=0. xff_ens3(13) =0. massfln(i,j,nall+13)=0. xff_ens3(15) =0. massfln(i,j,nall+15)=0. endif endif ! ! end water treatment ! ! !--- check for upwind convection ! iresult=0 massfld=0. ! call cup_direction2(i,j,dir,iact_old_gr, & ! massflx,iresult,1, & ! massfld, & ! itf,jtf,ktf, & ! ims,ime, jms,jme, kms,kme, & ! its,ite, jts,jte, kts,kte ) ! if(i.eq.ipr.and.j.eq.jpr.and.iedt.eq.1.and.ne.eq.1)then ! if(iedt.eq.1.and.ne.eq.1)then ! print *,massfld,ne,iedt,iens ! print *,xk(ne),xff_ens3(1),xff_ens3(2),xff_ens3(3) ! endif ! print *,i,j,massfld,aa0(i),aa1(i) IF(XK(ne).lt.0.and.xff0.gt.0.)iresultd=1 iresulte=max(iresult,iresultd) iresulte=1 if(iresulte.eq.1)then ! !--- special treatment for stability closures ! if(xff0.ge.0.)then xf_ens(i,j,nall+1)=massfld xf_ens(i,j,nall+2)=massfld xf_ens(i,j,nall+3)=massfld xf_ens(i,j,nall+13)=massfld if(xff_ens3(1).gt.0)xf_ens(i,j,nall+1)=max(0.,-xff_ens3(1)/xk(ne)) & +massfld if(xff_ens3(2).gt.0)xf_ens(i,j,nall+2)=max(0.,-xff_ens3(2)/xk(ne)) & +massfld if(xff_ens3(3).gt.0)xf_ens(i,j,nall+3)=max(0.,-xff_ens3(3)/xk(ne)) & +massfld if(xff_ens3(13).gt.0)xf_ens(i,j,nall+13)=max(0.,-xff_ens3(13)/xk(ne)) & +massfld ! endif else xf_ens(i,j,nall+1)=massfld xf_ens(i,j,nall+2)=massfld xf_ens(i,j,nall+3)=massfld xf_ens(i,j,nall+13)=massfld endif ! !--- if iresult.eq.1, following independent of xff0 ! xf_ens(i,j,nall+4)=max(0.,xff_ens3(4) & +massfld) xf_ens(i,j,nall+5)=max(0.,xff_ens3(5) & +massfld) xf_ens(i,j,nall+6)=max(0.,xff_ens3(6) & +massfld) xf_ens(i,j,nall+14)=max(0.,xff_ens3(14) & +massfld) a1=max(1.e-3,pr_ens(i,j,nall+7)) xf_ens(i,j,nall+7)=max(0.,xff_ens3(7) & /a1) a1=max(1.e-3,pr_ens(i,j,nall+8)) xf_ens(i,j,nall+8)=max(0.,xff_ens3(8) & /a1) a1=max(1.e-3,pr_ens(i,j,nall+9)) xf_ens(i,j,nall+9)=max(0.,xff_ens3(9) & /a1) a1=max(1.e-3,pr_ens(i,j,nall+15)) xf_ens(i,j,nall+15)=max(0.,xff_ens3(15) & /a1) if(XK(ne).lt.0.)then xf_ens(i,j,nall+10)=max(0., & -xff_ens3(10)/xk(ne)) & +massfld xf_ens(i,j,nall+11)=max(0., & -xff_ens3(11)/xk(ne)) & +massfld xf_ens(i,j,nall+12)=max(0., & -xff_ens3(12)/xk(ne)) & +massfld else xf_ens(i,j,nall+10)=massfld xf_ens(i,j,nall+11)=massfld xf_ens(i,j,nall+12)=massfld endif if(icoic.ge.1)then closure_n(i)=0. xf_ens(i,j,nall+1)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+2)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+3)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+4)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+5)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+6)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+7)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+8)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+9)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+10)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+11)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+12)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+13)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+14)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+15)=xf_ens(i,j,nall+icoic) xf_ens(i,j,nall+16)=xf_ens(i,j,nall+icoic) endif ! ! 16 is a randon pick from the oher 15 ! if(irandom.eq.1)then call random_number (xxx) ixxx=min(15,max(1,int(15.*xxx+1.e-8))) xf_ens(i,j,nall+16)=xf_ens(i,j,nall+ixxx) else xf_ens(i,j,nall+16)=xf_ens(i,j,nall+1) endif ! ! !--- store new for next time step ! do nens3=1,maxens3 massfln(i,j,nall+nens3)=edt(i) & *xf_ens(i,j,nall+nens3) massfln(i,j,nall+nens3)=max(0., & massfln(i,j,nall+nens3)) enddo ! ! !--- do some more on the caps!!! ne=1 for 175, ne=2 for 100,.... ! ! do not care for caps here for closure groups 1 and 5, ! they are fine, do not turn them off here ! ! if(ne.eq.2.and.ierr2(i).gt.0)then xf_ens(i,j,nall+1) =0. xf_ens(i,j,nall+2) =0. xf_ens(i,j,nall+3) =0. xf_ens(i,j,nall+4) =0. xf_ens(i,j,nall+5) =0. xf_ens(i,j,nall+6) =0. xf_ens(i,j,nall+7) =0. xf_ens(i,j,nall+8) =0. xf_ens(i,j,nall+9) =0. xf_ens(i,j,nall+10)=0. xf_ens(i,j,nall+11)=0. xf_ens(i,j,nall+12)=0. xf_ens(i,j,nall+13)=0. xf_ens(i,j,nall+14)=0. xf_ens(i,j,nall+15)=0. xf_ens(i,j,nall+16)=0. massfln(i,j,nall+1)=0. massfln(i,j,nall+2)=0. massfln(i,j,nall+3)=0. massfln(i,j,nall+4)=0. massfln(i,j,nall+5)=0. massfln(i,j,nall+6)=0. massfln(i,j,nall+7)=0. massfln(i,j,nall+8)=0. massfln(i,j,nall+9)=0. massfln(i,j,nall+10)=0. massfln(i,j,nall+11)=0. massfln(i,j,nall+12)=0. massfln(i,j,nall+13)=0. massfln(i,j,nall+14)=0. massfln(i,j,nall+15)=0. massfln(i,j,nall+16)=0. endif if(ne.eq.3.and.ierr3(i).gt.0)then xf_ens(i,j,nall+1) =0. xf_ens(i,j,nall+2) =0. xf_ens(i,j,nall+3) =0. xf_ens(i,j,nall+4) =0. xf_ens(i,j,nall+5) =0. xf_ens(i,j,nall+6) =0. xf_ens(i,j,nall+7) =0. xf_ens(i,j,nall+8) =0. xf_ens(i,j,nall+9) =0. xf_ens(i,j,nall+10)=0. xf_ens(i,j,nall+11)=0. xf_ens(i,j,nall+12)=0. xf_ens(i,j,nall+13)=0. xf_ens(i,j,nall+14)=0. xf_ens(i,j,nall+15)=0. xf_ens(i,j,nall+16)=0. massfln(i,j,nall+1)=0. massfln(i,j,nall+2)=0. massfln(i,j,nall+3)=0. massfln(i,j,nall+4)=0. massfln(i,j,nall+5)=0. massfln(i,j,nall+6)=0. massfln(i,j,nall+7)=0. massfln(i,j,nall+8)=0. massfln(i,j,nall+9)=0. massfln(i,j,nall+10)=0. massfln(i,j,nall+11)=0. massfln(i,j,nall+12)=0. massfln(i,j,nall+13)=0. massfln(i,j,nall+14)=0. massfln(i,j,nall+15)=0. massfln(i,j,nall+16)=0. endif endif 350 continue ! ne=1, cap=175 ! nall=(iens-1)*maxens3*maxens*maxens2 & +(iedt-1)*maxens*maxens3 ! ne=2, cap=100 ! nall2=(iens-1)*maxens3*maxens*maxens2 & +(iedt-1)*maxens*maxens3 & +(2-1)*maxens3 xf_ens(i,j,nall+4) = xf_ens(i,j,nall2+4) xf_ens(i,j,nall+5) =xf_ens(i,j,nall2+5) xf_ens(i,j,nall+6) =xf_ens(i,j,nall2+6) xf_ens(i,j,nall+14) =xf_ens(i,j,nall2+14) xf_ens(i,j,nall+7) =xf_ens(i,j,nall2+7) xf_ens(i,j,nall+8) =xf_ens(i,j,nall2+8) xf_ens(i,j,nall+9) =xf_ens(i,j,nall2+9) xf_ens(i,j,nall+15) =xf_ens(i,j,nall2+15) xf_ens(i,j,nall+10)=xf_ens(i,j,nall2+10) xf_ens(i,j,nall+11)=xf_ens(i,j,nall2+11) xf_ens(i,j,nall+12)=xf_ens(i,j,nall2+12) go to 100 endif elseif(ierr(i).ne.20.and.ierr(i).ne.0)then do n=1,ensdim xf_ens(i,j,n)=0. massfln(i,j,n)=0. enddo endif 100 continue END SUBROUTINE cup_forcing_ens_3d SUBROUTINE cup_kbcon(cap_inc,iloop,k22,kbcon,he_cup,hes_cup, & ierr,kbmax,p_cup,cap_max, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! ! ! ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & he_cup,hes_cup,p_cup real, dimension (its:ite) & ,intent (in ) :: & cap_max,cap_inc integer, dimension (its:ite) & ,intent (in ) :: & kbmax integer, dimension (its:ite) & ,intent (inout) :: & kbcon,k22,ierr integer & ,intent (in ) :: & iloop ! ! local variables in this routine ! integer :: & i,k real :: & pbcdif,plus,hetest ! !--- DETERMINE THE LEVEL OF CONVECTIVE CLOUD BASE - KBCON ! DO 27 i=its,itf kbcon(i)=1 IF(ierr(I).ne.0)GO TO 27 KBCON(I)=K22(I) GO TO 32 31 CONTINUE KBCON(I)=KBCON(I)+1 IF(KBCON(I).GT.KBMAX(i)+2)THEN if(iloop.ne.4)ierr(i)=3 ! if(iloop.lt.4)ierr(i)=997 GO TO 27 ENDIF 32 CONTINUE hetest=HE_cup(I,K22(I)) if(iloop.eq.5)then do k=1,k22(i) hetest=max(hetest,he_cup(i,k)) enddo endif IF(HETEST.LT.HES_cup(I,KBCON(I)))GO TO 31 ! cloud base pressure and max moist static energy pressure ! i.e., the depth (in mb) of the layer of negative buoyancy if(KBCON(I)-K22(I).eq.1)go to 27 PBCDIF=-P_cup(I,KBCON(I))+P_cup(I,K22(I)) plus=max(25.,cap_max(i)-float(iloop-1)*cap_inc(i)) if(iloop.eq.4)plus=cap_max(i) ! ! for shallow convection, if cap_max is greater than 25, it is the pressure at pbltop if(iloop.eq.5)plus=25. if(iloop.eq.5.and.cap_max(i).gt.25)pbcdif=-P_cup(I,KBCON(I))+cap_max(i) IF(PBCDIF.GT.plus)THEN K22(I)=K22(I)+1 KBCON(I)=K22(I) GO TO 32 ENDIF 27 CONTINUE END SUBROUTINE cup_kbcon SUBROUTINE cup_ktop(ilo,dby,kbcon,ktop,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! dby = buoancy term ! ktop = cloud top (output) ! ilo = flag ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,kts:kte) & ,intent (inout) :: & dby integer, dimension (its:ite) & ,intent (in ) :: & kbcon integer & ,intent (in ) :: & ilo integer, dimension (its:ite) & ,intent (out ) :: & ktop integer, dimension (its:ite) & ,intent (inout) :: & ierr ! ! local variables in this routine ! integer :: & i,k ! DO 42 i=its,itf ktop(i)=1 IF(ierr(I).EQ.0)then DO 40 K=KBCON(I)+1,ktf-1 IF(DBY(I,K).LE.0.)THEN KTOP(I)=K-1 GO TO 41 ENDIF 40 CONTINUE if(ilo.eq.1)ierr(i)=5 ! if(ilo.eq.2)ierr(i)=998 GO TO 42 41 CONTINUE do k=ktop(i)+1,ktf dby(i,k)=0. enddo endif 42 CONTINUE END SUBROUTINE cup_ktop SUBROUTINE cup_MAXIMI(ARRAY,KS,KE,MAXX,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! array input array ! x output array with return values ! kt output array of levels ! ks,kend check-range real, dimension (its:ite,kts:kte) & ,intent (in ) :: & array integer, dimension (its:ite) & ,intent (in ) :: & ierr,ke integer & ,intent (in ) :: & ks integer, dimension (its:ite) & ,intent (out ) :: & maxx real, dimension (its:ite) :: & x real :: & xar integer :: & i,k DO 200 i=its,itf MAXX(I)=KS if(ierr(i).eq.0)then X(I)=ARRAY(I,KS) ! DO 100 K=KS,KE(i) XAR=ARRAY(I,K) IF(XAR.GE.X(I)) THEN X(I)=XAR MAXX(I)=K ENDIF 100 CONTINUE endif 200 CONTINUE END SUBROUTINE cup_MAXIMI SUBROUTINE cup_minimi(ARRAY,KS,KEND,KT,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! array input array ! x output array with return values ! kt output array of levels ! ks,kend check-range real, dimension (its:ite,kts:kte) & ,intent (in ) :: & array integer, dimension (its:ite) & ,intent (in ) :: & ierr,ks,kend integer, dimension (its:ite) & ,intent (out ) :: & kt real, dimension (its:ite) :: & x integer :: & i,k,kstop DO 200 i=its,itf KT(I)=KS(I) if(ierr(i).eq.0)then X(I)=ARRAY(I,KS(I)) KSTOP=MAX(KS(I)+1,KEND(I)) ! DO 100 K=KS(I)+1,KSTOP IF(ARRAY(I,K).LT.X(I)) THEN X(I)=ARRAY(I,K) KT(I)=K ENDIF 100 CONTINUE endif 200 CONTINUE END SUBROUTINE cup_MINIMI SUBROUTINE cup_output_ens_3d(xf_ens,ierr,dellat,dellaq,dellaqc, & subt_ens,subq_ens,subt,subq,outtem,outq,outqc, & zu,sub_mas,pre,pw,xmb,ktop, & j,name,nx,nx2,iens,ierr2,ierr3,pr_ens, & maxens3,ensdim,massfln, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI,closure_n,xland1, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte integer, intent (in ) :: & j,ensdim,nx,nx2,iens,maxens3 ! xf_ens = ensemble mass fluxes ! pr_ens = precipitation ensembles ! dellat = change of temperature per unit mass flux of cloud ensemble ! dellaq = change of q per unit mass flux of cloud ensemble ! dellaqc = change of qc per unit mass flux of cloud ensemble ! outtem = output temp tendency (per s) ! outq = output q tendency (per s) ! outqc = output qc tendency (per s) ! pre = output precip ! xmb = total base mass flux ! xfac1 = correction factor ! pw = pw -epsilon*pd (ensemble dependent) ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,jts:jte,1:ensdim) & ,intent (inout) :: & xf_ens,pr_ens,massfln real, dimension (its:ite,jts:jte) & ,intent (inout) :: & APR_GR,APR_W,APR_MC,APR_ST,APR_AS,APR_CAPMA, & APR_CAPME,APR_CAPMI real, dimension (its:ite,kts:kte) & ,intent (out ) :: & outtem,outq,outqc,subt,subq,sub_mas real, dimension (its:ite,kts:kte) & ,intent (in ) :: & zu real, dimension (its:ite) & ,intent (out ) :: & pre,xmb real, dimension (its:ite) & ,intent (inout ) :: & closure_n,xland1 real, dimension (its:ite,kts:kte,1:nx) & ,intent (in ) :: & subt_ens,subq_ens,dellat,dellaqc,dellaq,pw integer, dimension (its:ite) & ,intent (in ) :: & ktop integer, dimension (its:ite) & ,intent (inout) :: & ierr,ierr2,ierr3 ! ! local variables in this routine ! integer :: & i,k,n,ncount real :: & outtes,ddtes,dtt,dtq,dtqc,dtpw,tuning,prerate,clos_wei,xmbhelp real :: & dtts,dtqs real, dimension (its:ite) :: & xfac1,xfac2 real, dimension (its:ite):: & xmb_ske,xmb_ave,xmb_std,xmb_cur,xmbweight real, dimension (its:ite):: & pr_ske,pr_ave,pr_std,pr_cur real, dimension (its:ite,jts:jte):: & pr_gr,pr_w,pr_mc,pr_st,pr_as,pr_capma, & pr_capme,pr_capmi real, dimension (5) :: weight,wm,wm1,wm2,wm3 real, dimension (its:ite,5) :: xmb_w ! character *(*), intent (in) :: & name ! weight(1) = -999. !this will turn off weights wm(1)=-999. tuning=0. ! ! DO k=kts,ktf do i=its,itf outtem(i,k)=0. outq(i,k)=0. outqc(i,k)=0. subt(i,k)=0. subq(i,k)=0. sub_mas(i,k)=0. enddo enddo do i=its,itf pre(i)=0. xmb(i)=0. xfac1(i)=0. xfac2(i)=0. xmbweight(i)=1. enddo do i=its,itf IF(ierr(i).eq.0)then do n=(iens-1)*nx*nx2*maxens3+1,iens*nx*nx2*maxens3 if(pr_ens(i,j,n).le.0.)then xf_ens(i,j,n)=0. endif enddo endif enddo ! !--- calculate ensemble average mass fluxes ! call massflx_stats(xf_ens,ensdim,nx2,nx,maxens3, & xmb_ave,xmb_std,xmb_cur,xmb_ske,j,ierr,1, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI, & pr_gr,pr_w,pr_mc,pr_st,pr_as, & pr_capma,pr_capme,pr_capmi, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) xmb_w=0. call massflx_stats(pr_ens,ensdim,nx2,nx,maxens3, & pr_ave,pr_std,pr_cur,pr_ske,j,ierr,2, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI, & pr_gr,pr_w,pr_mc,pr_st,pr_as, & pr_capma,pr_capme,pr_capmi, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) ! !-- now do feedback ! ddtes=100. do i=its,itf if(ierr(i).eq.0)then if(xmb_ave(i).le.0.)then ierr(i)=13 xmb_ave(i)=0. endif xmb(i)=max(.1*xmb_ave(i),xmb_ave(i)-tuning*xmb_std(i)) ! --- Now use proper count of how many closures were actually ! used in cup_forcing_ens (including screening of some ! closures over water) to properly normalize xmb clos_wei=16./max(1.,closure_n(i)) if (xland1(i).lt.0.5)xmb(i)=xmb(i)*clos_wei if(xmb(i).eq.0.)then ierr(i)=19 endif if(xmb(i).gt.100.)then ierr(i)=19 endif xfac1(i)=xmb(i) xfac2(i)=xmb(i) endif ! if(weight(1).lt.-100.)xfac1(i)=xmb_ave(i) ! if(weight(1).lt.-100.)xfac2(i)=xmb_ave(i) ENDDO DO k=kts,ktf do i=its,itf dtt=0. dtts=0. dtq=0. dtqs=0. dtqc=0. dtpw=0. IF(ierr(i).eq.0.and.k.le.ktop(i))then do n=1,nx dtt=dtt+dellat(i,k,n) dtts=dtts+subt_ens(i,k,n) dtq=dtq+dellaq(i,k,n) dtqs=dtqs+subq_ens(i,k,n) dtqc=dtqc+dellaqc(i,k,n) dtpw=dtpw+pw(i,k,n) enddo OUTTEM(I,K)=XMB(I)*dtt/float(nx) SUBT(I,K)=XMB(I)*dtts/float(nx) OUTQ(I,K)=XMB(I)*dtq/float(nx) SUBQ(I,K)=XMB(I)*dtqs/float(nx) OUTQC(I,K)=XMB(I)*dtqc/float(nx) PRE(I)=PRE(I)+XMB(I)*dtpw/float(nx) sub_mas(i,k)=zu(i,k)*xmb(i) endif enddo enddo do i=its,itf if(ierr(i).eq.0)then do k=(iens-1)*nx*nx2*maxens3+1,iens*nx*nx2*maxens3 massfln(i,j,k)=massfln(i,j,k)*xfac1(i) xf_ens(i,j,k)=xf_ens(i,j,k)*xfac1(i) enddo endif ENDDO END SUBROUTINE cup_output_ens_3d SUBROUTINE cup_up_aa0(aa0,z,zu,dby,GAMMA_CUP,t_cup, & kbcon,ktop,ierr, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! aa0 cloud work function ! gamma_cup = gamma on model cloud levels ! t_cup = temperature (Kelvin) on model cloud levels ! dby = buoancy term ! zu= normalized updraft mass flux ! z = heights of model levels ! ierr error value, maybe modified in this routine ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & z,zu,gamma_cup,t_cup,dby integer, dimension (its:ite) & ,intent (in ) :: & kbcon,ktop ! ! input and output ! integer, dimension (its:ite) & ,intent (inout) :: & ierr real, dimension (its:ite) & ,intent (out ) :: & aa0 ! ! local variables in this routine ! integer :: & i,k real :: & dz,da ! do i=its,itf aa0(i)=0. enddo DO 100 k=kts+1,ktf DO 100 i=its,itf IF(ierr(i).ne.0)GO TO 100 IF(K.LE.KBCON(I))GO TO 100 IF(K.Gt.KTOP(I))GO TO 100 DZ=Z(I,K)-Z(I,K-1) da=zu(i,k)*DZ*(9.81/(1004.*( & (T_cup(I,K)))))*DBY(I,K-1)/ & (1.+GAMMA_CUP(I,K)) IF(K.eq.KTOP(I).and.da.le.0.)go to 100 AA0(I)=AA0(I)+da if(aa0(i).lt.0.)aa0(i)=0. 100 continue END SUBROUTINE cup_up_aa0 SUBROUTINE cup_up_he(k22,hkb,z_cup,cd,entr,he_cup,hc, & kbcon,ierr,dby,he,hes_cup,name, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte character *(*), intent (in) :: & name ! hc = cloud moist static energy ! hkb = moist static energy at originating level ! he = moist static energy on model levels ! he_cup = moist static energy on model cloud levels ! hes_cup = saturation moist static energy on model cloud levels ! dby = buoancy term ! cd= detrainment function ! z_cup = heights of model cloud levels ! entr = entrainment rate ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & he,he_cup,hes_cup,z_cup,cd ! entr= entrainment rate real & ,intent (in ) :: & entr integer, dimension (its:ite) & ,intent (in ) :: & kbcon,k22 ! ! input and output ! ! ierr error value, maybe modified in this routine integer, dimension (its:ite) & ,intent (inout) :: & ierr real, dimension (its:ite,kts:kte) & ,intent (out ) :: & hc,dby real, dimension (its:ite) & ,intent (out ) :: & hkb ! ! local variables in this routine ! integer :: & i,k real :: & dz ! !--- moist static energy inside cloud ! do k=kts,ktf do i=its,itf hc(i,k)=0. DBY(I,K)=0. enddo enddo do i=its,itf hkb(i)=0. enddo do i=its,itf if(ierr(i).eq.0.)then hkb(i)=he_cup(i,k22(i)) if(name.eq.'shallow')then do k=1,k22(i) hkb(i)=max(hkb(i),he_cup(i,k)) enddo endif do k=1,k22(i) hc(i,k)=he_cup(i,k) enddo do k=k22(i),kbcon(i)-1 hc(i,k)=hkb(i) enddo k=kbcon(i) hc(i,k)=hkb(i) DBY(I,Kbcon(i))=Hkb(I)-HES_cup(I,K) endif enddo do k=kts+1,ktf do i=its,itf if(k.gt.kbcon(i).and.ierr(i).eq.0.)then DZ=Z_cup(i,K)-Z_cup(i,K-1) HC(i,K)=(HC(i,K-1)*(1.-.5*CD(i,K)*DZ)+entr* & DZ*HE(i,K-1))/(1.+entr*DZ-.5*cd(i,k)*dz) DBY(I,K)=HC(I,K)-HES_cup(I,K) endif enddo enddo END SUBROUTINE cup_up_he SUBROUTINE cup_up_moisture(name,ierr,z_cup,qc,qrc,pw,pwav, & kbcon,ktop,cd,dby,mentr_rate,clw_all, & q,GAMMA_cup,zu,qes_cup,k22,qe_cup,xl, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! cd= detrainment function ! q = environmental q on model levels ! qe_cup = environmental q on model cloud levels ! qes_cup = saturation q on model cloud levels ! dby = buoancy term ! cd= detrainment function ! zu = normalized updraft mass flux ! gamma_cup = gamma on model cloud levels ! mentr_rate = entrainment rate ! real, dimension (its:ite,kts:kte) & ,intent (in ) :: & q,zu,gamma_cup,qe_cup,dby,qes_cup,z_cup,cd ! entr= entrainment rate real & ,intent (in ) :: & mentr_rate,xl integer, dimension (its:ite) & ,intent (in ) :: & kbcon,ktop,k22 ! ! input and output ! ! ierr error value, maybe modified in this routine integer, dimension (its:ite) & ,intent (inout) :: & ierr character *(*), intent (in) :: & name ! qc = cloud q (including liquid water) after entrainment ! qrch = saturation q in cloud ! qrc = liquid water content in cloud after rainout ! pw = condensate that will fall out at that level ! pwav = totan normalized integrated condensate (I1) ! c0 = conversion rate (cloud to rain) real, dimension (its:ite,kts:kte) & ,intent (out ) :: & qc,qrc,pw,clw_all real, dimension (its:ite) & ,intent (out ) :: & pwav ! ! local variables in this routine ! integer :: & iall,i,k real :: & dh,qrch,c0,dz,radius ! iall=0 c0=.002 ! !--- no precip for small clouds ! if(name.eq.'shallow')c0=0. do i=its,itf pwav(i)=0. enddo do k=kts,ktf do i=its,itf pw(i,k)=0. qc(i,k)=0. if(ierr(i).eq.0)qc(i,k)=qes_cup(i,k) clw_all(i,k)=0. qrc(i,k)=0. enddo enddo do i=its,itf if(ierr(i).eq.0.)then do k=k22(i),kbcon(i)-1 qc(i,k)=qe_cup(i,k22(i)) enddo endif enddo DO 100 k=kts+1,ktf DO 100 i=its,itf IF(ierr(i).ne.0)GO TO 100 IF(K.Lt.KBCON(I))GO TO 100 IF(K.Gt.KTOP(I))GO TO 100 DZ=Z_cup(i,K)-Z_cup(i,K-1) ! !------ 1. steady state plume equation, for what could !------ be in cloud without condensation ! ! QC(i,K)=(QC(i,K-1)*(1.-.5*CD(i,K)*DZ)+mentr_rate* & DZ*Q(i,K-1))/(1.+mentr_rate*DZ-.5*cd(i,k)*dz) ! !--- saturation in cloud, this is what is allowed to be in it ! QRCH=QES_cup(I,K)+(1./XL)*(GAMMA_cup(i,k) & /(1.+GAMMA_cup(i,k)))*DBY(I,K) ! !------- LIQUID WATER CONTENT IN cloud after rainout ! clw_all(i,k)=QC(I,K)-QRCH QRC(I,K)=(QC(I,K)-QRCH)/(1.+C0*DZ) if(qrc(i,k).lt.0.)then qrc(i,k)=0. endif ! !------- 3.Condensation ! PW(i,k)=c0*dz*QRC(I,K)*zu(i,k) if(iall.eq.1)then qrc(i,k)=0. pw(i,k)=(QC(I,K)-QRCH)*zu(i,k) if(pw(i,k).lt.0.)pw(i,k)=0. endif ! !----- set next level ! QC(I,K)=QRC(I,K)+qrch ! !--- integrated normalized ondensate ! PWAV(I)=PWAV(I)+PW(I,K) 100 CONTINUE END SUBROUTINE cup_up_moisture SUBROUTINE cup_up_nms(zu,z_cup,entr,cd,kbcon,ktop,ierr,k22, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ) IMPLICIT NONE ! ! on input ! ! only local wrf dimensions are need as of now in this routine integer & ,intent (in ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte ! cd= detrainment function real, dimension (its:ite,kts:kte) & ,intent (in ) :: & z_cup,cd ! entr= entrainment rate real & ,intent (in ) :: & entr integer, dimension (its:ite) & ,intent (in ) :: & kbcon,ktop,k22 ! ! input and output ! ! ierr error value, maybe modified in this routine integer, dimension (its:ite) & ,intent (inout) :: & ierr ! zu is the normalized mass flux real, dimension (its:ite,kts:kte) & ,intent (out ) :: & zu ! ! local variables in this routine ! integer :: & i,k real :: & dz ! ! initialize for this go around ! do k=kts,ktf do i=its,itf zu(i,k)=0. enddo enddo ! ! do normalized mass budget ! do i=its,itf IF(ierr(I).eq.0)then do k=k22(i),kbcon(i) zu(i,k)=1. enddo DO K=KBcon(i)+1,KTOP(i) DZ=Z_cup(i,K)-Z_cup(i,K-1) ZU(i,K)=ZU(i,K-1)*(1.+(entr-cd(i,k))*DZ) enddo endif enddo END SUBROUTINE cup_up_nms !==================================================================== SUBROUTINE g3init(RTHCUTEN,RQVCUTEN,RQCCUTEN,RQICUTEN, & MASS_FLUX,cp,restart, & P_QC,P_QI,P_FIRST_SCALAR, & RTHFTEN, RQVFTEN, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI, & cugd_tten,cugd_ttens,cugd_qvten, & cugd_qvtens,cugd_qcten, & allowed_to_read, & ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & its, ite, jts, jte, kts, kte ) !-------------------------------------------------------------------- IMPLICIT NONE !-------------------------------------------------------------------- LOGICAL , INTENT(IN) :: restart,allowed_to_read INTEGER , INTENT(IN) :: ids, ide, jds, jde, kds, kde, & ims, ime, jms, jme, kms, kme, & its, ite, jts, jte, kts, kte INTEGER , INTENT(IN) :: P_FIRST_SCALAR, P_QI, P_QC REAL, INTENT(IN) :: cp REAL, DIMENSION( ims:ime , kms:kme , jms:jme ) , INTENT(OUT) :: & CUGD_TTEN, & CUGD_TTENS, & CUGD_QVTEN, & CUGD_QVTENS, & CUGD_QCTEN REAL, DIMENSION( ims:ime , kms:kme , jms:jme ) , INTENT(OUT) :: & RTHCUTEN, & RQVCUTEN, & RQCCUTEN, & RQICUTEN REAL, DIMENSION( ims:ime , kms:kme , jms:jme ) , INTENT(OUT) :: & RTHFTEN, & RQVFTEN REAL, DIMENSION( ims:ime , jms:jme ) , INTENT(OUT) :: & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI, & MASS_FLUX INTEGER :: i, j, k, itf, jtf, ktf jtf=min0(jte,jde-1) ktf=min0(kte,kde-1) itf=min0(ite,ide-1) IF(.not.restart)THEN DO j=jts,jte DO k=kts,kte DO i=its,ite RTHCUTEN(i,k,j)=0. RQVCUTEN(i,k,j)=0. ENDDO ENDDO ENDDO DO j=jts,jte DO k=kts,kte DO i=its,ite cugd_tten(i,k,j)=0. cugd_ttens(i,k,j)=0. cugd_qvten(i,k,j)=0. cugd_qvtens(i,k,j)=0. ENDDO ENDDO ENDDO DO j=jts,jtf DO k=kts,ktf DO i=its,itf RTHFTEN(i,k,j)=0. RQVFTEN(i,k,j)=0. ENDDO ENDDO ENDDO IF (P_QC .ge. P_FIRST_SCALAR) THEN DO j=jts,jtf DO k=kts,ktf DO i=its,itf RQCCUTEN(i,k,j)=0. cugd_qcten(i,k,j)=0. ENDDO ENDDO ENDDO ENDIF IF (P_QI .ge. P_FIRST_SCALAR) THEN DO j=jts,jtf DO k=kts,ktf DO i=its,itf RQICUTEN(i,k,j)=0. ENDDO ENDDO ENDDO ENDIF DO j=jts,jtf DO i=its,itf mass_flux(i,j)=0. ENDDO ENDDO DO j=jts,jtf DO i=its,itf APR_GR(i,j)=0. APR_ST(i,j)=0. APR_W(i,j)=0. APR_MC(i,j)=0. APR_AS(i,j)=0. APR_CAPMA(i,j)=0. APR_CAPME(i,j)=0. APR_CAPMI(i,j)=0. ENDDO ENDDO ENDIF END SUBROUTINE g3init SUBROUTINE massflx_stats(xf_ens,ensdim,maxens,maxens2,maxens3, & xt_ave,xt_std,xt_cur,xt_ske,j,ierr,itest, & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI, & pr_gr,pr_w,pr_mc,pr_st,pr_as, & pr_capma,pr_capme,pr_capmi, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) IMPLICIT NONE integer, intent (in ) :: & j,ensdim,maxens3,maxens,maxens2,itest INTEGER, INTENT(IN ) :: & itf,jtf,ktf, & its,ite, jts,jte, kts,kte real, dimension (its:ite) & , intent(inout) :: & xt_ave,xt_cur,xt_std,xt_ske integer, dimension (its:ite), intent (in) :: & ierr real, dimension (its:ite,jts:jte,1:ensdim) & , intent(in ) :: & xf_ens real, dimension (its:ite,jts:jte) & , intent(inout) :: & APR_GR,APR_W,APR_MC,APR_ST,APR_AS, & APR_CAPMA,APR_CAPME,APR_CAPMI real, dimension (its:ite,jts:jte) & , intent(inout) :: & pr_gr,pr_w,pr_mc,pr_st,pr_as, & pr_capma,pr_capme,pr_capmi ! ! local stuff ! real, dimension (its:ite , 1:maxens3 ) :: & x_ave,x_cur,x_std,x_ske real, dimension (its:ite , 1:maxens ) :: & x_ave_cap integer, dimension (1:maxens3) :: nc1 integer :: i,k integer :: num,kk,num2,iedt real :: a3,a4 num=ensdim/maxens3 num2=ensdim/maxens if(itest.eq.1)then do i=its,ite pr_gr(i,j) = 0. pr_w(i,j) = 0. pr_mc(i,j) = 0. pr_st(i,j) = 0. pr_as(i,j) = 0. pr_capma(i,j) = 0. pr_capme(i,j) = 0. pr_capmi(i,j) = 0. enddo endif do k=1,maxens do i=its,ite x_ave_cap(i,k)=0. enddo enddo do k=1,maxens3 do i=its,ite x_ave(i,k)=0. x_std(i,k)=0. x_ske(i,k)=0. x_cur(i,k)=0. enddo enddo do i=its,ite xt_ave(i)=0. xt_std(i)=0. xt_ske(i)=0. xt_cur(i)=0. enddo do kk=1,num do k=1,maxens3 do i=its,ite if(ierr(i).eq.0)then x_ave(i,k)=x_ave(i,k)+xf_ens(i,j,maxens3*(kk-1)+k) endif enddo enddo enddo do iedt=1,maxens2 do k=1,maxens do kk=1,maxens3 do i=its,ite if(ierr(i).eq.0)then x_ave_cap(i,k)=x_ave_cap(i,k) & +xf_ens(i,j,maxens3*(k-1)+(iedt-1)*maxens*maxens3+kk) endif enddo enddo enddo enddo do k=1,maxens do i=its,ite if(ierr(i).eq.0)then x_ave_cap(i,k)=x_ave_cap(i,k)/float(num2) endif enddo enddo do k=1,maxens3 do i=its,ite if(ierr(i).eq.0)then x_ave(i,k)=x_ave(i,k)/float(num) endif enddo enddo do k=1,maxens3 do i=its,ite if(ierr(i).eq.0)then xt_ave(i)=xt_ave(i)+x_ave(i,k) endif enddo enddo do i=its,ite if(ierr(i).eq.0)then xt_ave(i)=xt_ave(i)/float(maxens3) endif enddo ! !--- now do std, skewness,curtosis ! do kk=1,num do k=1,maxens3 do i=its,ite if(ierr(i).eq.0.and.x_ave(i,k).gt.0.)then ! print *,i,j,k,kk,x_std(i,k),xf_ens(i,j,maxens3*(kk-1)+k),x_ave(i,k) x_std(i,k)=x_std(i,k)+(xf_ens(i,j,maxens3*(kk-1)+k)-x_ave(i,k))**2 x_ske(i,k)=x_ske(i,k)+(xf_ens(i,j,maxens3*(kk-1)+k)-x_ave(i,k))**3 x_cur(i,k)=x_cur(i,k)+(xf_ens(i,j,maxens3*(kk-1)+k)-x_ave(i,k))**4 endif enddo enddo enddo do k=1,maxens3 do i=its,ite if(ierr(i).eq.0.and.xt_ave(i).gt.0.)then xt_std(i)=xt_std(i)+(x_ave(i,k)-xt_ave(i))**2 xt_ske(i)=xt_ske(i)+(x_ave(i,k)-xt_ave(i))**3 xt_cur(i)=xt_cur(i)+(x_ave(i,k)-xt_ave(i))**4 endif enddo enddo do k=1,maxens3 do i=its,ite if(ierr(i).eq.0.and.x_std(i,k).gt.0.)then x_std(i,k)=x_std(i,k)/float(num) a3=max(1.e-6,x_std(i,k)) x_std(i,k)=sqrt(a3) a3=max(1.e-6,x_std(i,k)**3) a4=max(1.e-6,x_std(i,k)**4) x_ske(i,k)=x_ske(i,k)/float(num)/a3 x_cur(i,k)=x_cur(i,k)/float(num)/a4 endif ! print*,' ' ! print*,'Some statistics at gridpoint i,j, ierr',i,j,ierr(i) ! print*,'statistics for closure number ',k ! print*,'Average= ',x_ave(i,k),' Std= ',x_std(i,k) ! print*,'Skewness= ',x_ske(i,k),' Curtosis= ',x_cur(i,k) ! print*,' ' enddo enddo do i=its,ite if(ierr(i).eq.0.and.xt_std(i).gt.0.)then xt_std(i)=xt_std(i)/float(maxens3) a3=max(1.e-6,xt_std(i)) xt_std(i)=sqrt(a3) a3=max(1.e-6,xt_std(i)**3) a4=max(1.e-6,xt_std(i)**4) xt_ske(i)=xt_ske(i)/float(maxens3)/a3 xt_cur(i)=xt_cur(i)/float(maxens3)/a4 ! print*,' ' ! print*,'Total ensemble independent statistics at i =',i ! print*,'Average= ',xt_ave(i),' Std= ',xt_std(i) ! print*,'Skewness= ',xt_ske(i),' Curtosis= ',xt_cur(i) ! print*,' ' ! ! first go around: store massflx for different closures/caps ! if(itest.eq.1)then pr_gr(i,j) = .25*(x_ave(i,1)+x_ave(i,2)+x_ave(i,3)+x_ave(i,13)) pr_w(i,j) = .25*(x_ave(i,4)+x_ave(i,5)+x_ave(i,6)+x_ave(i,14)) pr_mc(i,j) = .25*(x_ave(i,7)+x_ave(i,8)+x_ave(i,9)+x_ave(i,15)) pr_st(i,j) = .333*(x_ave(i,10)+x_ave(i,11)+x_ave(i,12)) pr_as(i,j) = x_ave(i,16) pr_capma(i,j) = x_ave_cap(i,1) pr_capme(i,j) = x_ave_cap(i,2) pr_capmi(i,j) = x_ave_cap(i,3) ! ! second go around: store preciprates (mm/hour) for different closures/caps ! else if (itest.eq.2)then APR_GR(i,j)=.25*(x_ave(i,1)+x_ave(i,2)+x_ave(i,3)+x_ave(i,13))* & 3600.*pr_gr(i,j) +APR_GR(i,j) APR_W(i,j)=.25*(x_ave(i,4)+x_ave(i,5)+x_ave(i,6)+x_ave(i,14))* & 3600.*pr_w(i,j) +APR_W(i,j) APR_MC(i,j)=.25*(x_ave(i,7)+x_ave(i,8)+x_ave(i,9)+x_ave(i,15))* & 3600.*pr_mc(i,j) +APR_MC(i,j) APR_ST(i,j)=.333*(x_ave(i,10)+x_ave(i,11)+x_ave(i,12))* & 3600.*pr_st(i,j) +APR_ST(i,j) APR_AS(i,j)=x_ave(i,16)* & 3600.*pr_as(i,j) +APR_AS(i,j) APR_CAPMA(i,j) = x_ave_cap(i,1)* & 3600.*pr_capma(i,j) +APR_CAPMA(i,j) APR_CAPME(i,j) = x_ave_cap(i,2)* & 3600.*pr_capme(i,j) +APR_CAPME(i,j) APR_CAPMI(i,j) = x_ave_cap(i,3)* & 3600.*pr_capmi(i,j) +APR_CAPMI(i,j) endif endif enddo END SUBROUTINE massflx_stats SUBROUTINE cup_axx(tcrit,kbmax,z1,p,psur,xl,rv,cp,tx,qx,axx,ierr, & cap_max,cap_max_increment,entr_rate,mentr_rate,& j,itf,jtf,ktf, & its,ite, jts,jte, kts,kte,ens4) IMPLICIT NONE INTEGER, INTENT(IN ) :: & j,itf,jtf,ktf, & its,ite, jts,jte, kts,kte,ens4 real, dimension (its:ite,kts:kte,1:ens4) & , intent(inout) :: & tx,qx real, dimension (its:ite,kts:kte) & , intent(in) :: & p real, dimension (its:ite) & , intent(in) :: & z1,psur,cap_max,cap_max_increment real, intent(in) :: & tcrit,xl,rv,cp,mentr_rate,entr_rate real, dimension (its:ite,1:ens4) & , intent(out) :: & axx integer, dimension (its:ite), intent (in) :: & ierr,kbmax integer, dimension (its:ite) :: & ierrxx,k22xx,kbconxx,ktopxx,kstabm,kstabi real, dimension (1:2) :: AE,BE,HT real, dimension (its:ite,kts:kte) :: tv real :: e,tvbar integer n,i,k,iph real, dimension (its:ite,kts:kte) :: & he,hes,qes,z, & qes_cup,q_cup,he_cup,hes_cup,z_cup,p_cup,gamma_cup,t_cup, & tn_cup, & dby,qc,qrcd,pwd,pw,hcd,qcd,dbyd,hc,qrc,zu,zd,cd real, dimension (its:ite) :: & AA0,HKB,QKB, & PWAV,BU do n=1,ens4 do i=its,ite axx(i,n)=0. enddo enddo HT(1)=XL/CP HT(2)=2.834E6/CP BE(1)=.622*HT(1)/.286 AE(1)=BE(1)/273.+ALOG(610.71) BE(2)=.622*HT(2)/.286 AE(2)=BE(2)/273.+ALOG(610.71) ! ! do 100 n=1,ens4 do k=kts,ktf do i=its,itf cd(i,k)=0.1*entr_rate enddo enddo do i=its,itf ierrxx(i)=ierr(i) k22xx(i)=1 kbconxx(i)=1 ktopxx(i)=1 kstabm(i)=ktf-1 enddo DO k=kts,ktf do i=its,itf if(ierrxx(i).eq.0)then IPH=1 IF(Tx(I,K,n).LE.TCRIT)IPH=2 E=EXP(AE(IPH)-BE(IPH)/TX(I,K,N)) QES(I,K)=.622*E/(100.*P(I,K)-E) IF(QES(I,K).LE.1.E-08)QES(I,K)=1.E-08 IF(Qx(I,K,N).GT.QES(I,K))Qx(I,K,N)=QES(I,K) TV(I,K)=Tx(I,K,N)+.608*Qx(I,K,N)*Tx(I,K,N) endif enddo enddo ! do i=its,itf if(ierrxx(i).eq.0)then Z(I,KTS)=max(0.,Z1(I))-(ALOG(P(I,KTS))- & ALOG(PSUR(I)))*287.*TV(I,KTS)/9.81 endif enddo ! --- calculate heights DO K=kts+1,ktf do i=its,itf if(ierrxx(i).eq.0)then TVBAR=.5*TV(I,K)+.5*TV(I,K-1) Z(I,K)=Z(I,K-1)-(ALOG(P(I,K))- & ALOG(P(I,K-1)))*287.*TVBAR/9.81 endif enddo enddo ! !--- calculate moist static energy - HE ! saturated moist static energy - HES ! DO k=kts,ktf do i=its,itf if(ierrxx(i).eq.0)then HE(I,K)=9.81*Z(I,K)+1004.*Tx(I,K,n)+2.5E06*Qx(I,K,n) HES(I,K)=9.81*Z(I,K)+1004.*Tx(I,K,n)+2.5E06*QES(I,K) IF(HE(I,K).GE.HES(I,K))HE(I,K)=HES(I,K) endif enddo enddo ! cup levels ! do k=kts+1,ktf do i=its,itf if(ierrxx(i).eq.0)then qes_cup(i,k)=.5*(qes(i,k-1)+qes(i,k)) q_cup(i,k)=.5*(qx(i,k-1,n)+qx(i,k,n)) hes_cup(i,k)=.5*(hes(i,k-1)+hes(i,k)) he_cup(i,k)=.5*(he(i,k-1)+he(i,k)) if(he_cup(i,k).gt.hes_cup(i,k))he_cup(i,k)=hes_cup(i,k) z_cup(i,k)=.5*(z(i,k-1)+z(i,k)) p_cup(i,k)=.5*(p(i,k-1)+p(i,k)) t_cup(i,k)=.5*(tx(i,k-1,n)+tx(i,k,n)) gamma_cup(i,k)=(xl/cp)*(xl/(rv*t_cup(i,k) & *t_cup(i,k)))*qes_cup(i,k) endif enddo enddo do i=its,itf if(ierrxx(i).eq.0)then qes_cup(i,1)=qes(i,1) q_cup(i,1)=qx(i,1,n) hes_cup(i,1)=hes(i,1) he_cup(i,1)=he(i,1) z_cup(i,1)=.5*(z(i,1)+z1(i)) p_cup(i,1)=.5*(p(i,1)+psur(i)) t_cup(i,1)=tx(i,1,n) gamma_cup(i,1)=xl/cp*(xl/(rv*t_cup(i,1) & *t_cup(i,1)))*qes_cup(i,1) endif enddo ! ! !------- DETERMINE LEVEL WITH HIGHEST MOIST STATIC ENERGY CONTENT - K22 ! CALL cup_MAXIMI(HE_CUP,3,KBMAX,K22XX,ierrxx, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) DO 36 i=its,itf IF(ierrxx(I).eq.0.)THEN IF(K22xx(I).GE.KBMAX(i))ierrxx(i)=2 endif 36 CONTINUE ! !--- DETERMINE THE LEVEL OF CONVECTIVE CLOUD BASE - KBCON ! call cup_kbcon(cap_max_increment,1,k22xx,kbconxx,he_cup,hes_cup, & ierrxx,kbmax,p_cup,cap_max, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- increase detrainment in stable layers ! CALL cup_minimi(HEs_cup,Kbconxx,kstabm,kstabi,ierrxx, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do i=its,itf IF(ierrxx(I).eq.0.)THEN if(kstabm(i)-1.gt.kstabi(i))then do k=kstabi(i),kstabm(i)-1 cd(i,k)=cd(i,k-1)+1.5*entr_rate if(cd(i,k).gt.10.0*entr_rate)cd(i,k)=10.0*entr_rate enddo ENDIF ENDIF ENDDO ! !--- calculate incloud moist static energy ! call cup_up_he(k22xx,hkb,z_cup,cd,mentr_rate,he_cup,hc, & kbconxx,ierrxx,dby,he,hes_cup,'deep', & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) !--- DETERMINE CLOUD TOP - KTOP ! call cup_ktop(1,dby,kbconxx,ktopxx,ierrxx, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !c--- normalized updraft mass flux profile ! call cup_up_nms(zu,z_cup,mentr_rate,cd,kbconxx,ktopxx,ierrxx,k22xx, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) ! !--- calculate workfunctions for updrafts ! call cup_up_aa0(aa0,z,zu,dby,GAMMA_CUP,t_cup, & kbconxx,ktopxx,ierrxx, & itf,jtf,ktf, & its,ite, jts,jte, kts,kte) do i=its,itf if(ierrxx(i).eq.0)axx(i,n)=aa0(i) enddo 100 continue END SUBROUTINE cup_axx SUBROUTINE conv_grell_spread3d(rthcuten,rqvcuten,rqccuten,raincv, & & cugd_avedx,cugd_tten,cugd_qvten,rqicuten,cugd_ttens, & & cugd_qvtens,cugd_qcten,pi_phy,moist_qv,pratec,dt,num_tiles,& & imomentum,F_QV ,F_QC ,F_QR ,F_QI ,F_QS, & & ids, ide, jds, jde, kds, kde, & & ips, ipe, jps, jpe, kps, kpe, & & ims, ime, jms, jme, kms, kme, & & its, ite, jts, jte, kts, kte ) ! INTEGER, INTENT(IN ) :: num_tiles,imomentum INTEGER, INTENT(IN ) :: ids, ide, jds, jde, kds, kde,& ims,ime, jms,jme, kms,kme, & ips,ipe, jps,jpe, kps,kpe, & its,ite, jts,jte, kts,kte, & cugd_avedx REAL, DIMENSION (ims:ime,kms:kme,jms:jme), optional,INTENT (INOUT) :: & & rthcuten,rqvcuten,rqccuten,rqicuten REAL, DIMENSION (ims:ime,kms:kme,jms:jme), optional,INTENT (IN ) :: & & cugd_tten,cugd_qvten,cugd_ttens,cugd_qvtens,cugd_qcten REAL, DIMENSION (ims:ime,kms:kme,jms:jme),INTENT (IN) :: & moist_qv REAL, DIMENSION (ims:ime,kms:kme,jms:jme), INTENT (IN) :: & PI_PHY REAL, DIMENSION (ims:ime,jms:jme), INTENT (INOUT) :: & raincv,pratec REAL, INTENT(IN) :: dt INTEGER :: ikk1,ikk2,ikk11,i,j,k,kk,nn,smoothh,smoothv INTEGER :: ifs,ife,jfs,jfe,ido,jdo,cugd_spread LOGICAL :: new ! ! Flags relating to the optional tendency arrays declared above ! Models that carry the optional tendencies will provdide the ! optional arguments at compile time; these flags all the model ! to determine at run-time whether a particular tracer is in ! use or not. ! LOGICAL, OPTIONAL :: & F_QV & ,F_QC & ,F_QR & ,F_QI & ,F_QS REAL, DIMENSION (its-2:ite+2,kts:kte,jts-2:jte+2) :: & RTHcutent,RQVcutent real, dimension (its-2:ite+2,jts-2:jte+2) :: Qmem real, dimension (its-1:ite+1,jts-1:jte+1) :: smTT,smTQ real, dimension (kts:kte) :: conv_TRASHT,conv_TRASHQ REAL :: Qmem1,Qmem2,Qmemf,Thresh smoothh=1 smoothv=1 cugd_spread=cugd_avedx/2 ifs=max(its,ids) jfs=max(jts,jds) ife=min(ite,ide-1) jfe=min(jte,jde-1) do j=jfs-2,jfe+2 do i=ifs-2,ife+2 Qmem(i,j)=1. enddo enddo do j=jfs-1,jfe+1 do i=ifs-1,ife+1 smTT(i,j)=0. smTQ(i,j)=0. enddo enddo do j=jfs,jfe do k=kts,kte do i=ifs,ife rthcuten(i,k,j)=0. rqvcuten(i,k,j)=0. enddo enddo enddo do j=jfs-2,jfe+2 do k=kts,kte do i=ifs-2,ife+2 RTHcutent(i,k,j)=0. RQVcutent(i,k,j)=0. enddo enddo enddo ! ! ! ! ! prelims finished, now go real for every grid point ! if(cugd_spread.gt.0.or.smoothh.eq.1)then !if(its.eq.ips)ifs=max(its-1,ids) !if(ite.eq.ipe)ife=min(ite+1,ide-1) !if(jts.eq.jps)jfs=max(jts-1,jds) !if(jte.eq.jpe)jfe=min(jte+1,jde-1) ifs=max(its-1,ids) ife=min(ite+1,ide-1) jfs=max(jts-1,jds) jfe=min(jte+1,jde-1) endif ! *** jm note -- for smoothing this goes out one row/column beyond tile in i and j do j=jfs,jfe do i=ifs,ife ! do k=kts,kte RTHcutent(i,k,j)=cugd_tten(i,k,j) RQVcutent(i,k,j)=cugd_qvten(i,k,j) enddo ! ! for high res run, spread the subsidence ! this is tricky......only consider grid points where there was no rain, ! so cugd_tten and such are zero! ! if(cugd_spread.gt.0)then do k=kts,kte do nn=-1,1,1 jdo=max(j+nn,jds) jdo=min(jdo,jde-1) do kk=-1,1,1 ido=max(i+kk,ids) ido=min(ido,ide-1) RTHcutent(i,k,j)=RTHcutent(i,k,j) & +Qmem(ido,jdo)*cugd_ttens(ido,k,jdo) RQVcutent(i,k,j)=RQVcutent(i,k,j) & +Qmem(ido,jdo)*cugd_qvtens(ido,k,jdo) enddo enddo enddo endif ! ! end spreading if(cugd_spread.eq.0)then do k=kts,kte RTHcutent(i,k,j)=RTHcutent(i,k,j)+cugd_ttens(i,k,j) RQVcutent(i,k,j)=RQVcutent(i,k,j)+cugd_qvtens(i,k,j) enddo endif enddo ! end j enddo ! end i ! smooth do k=kts,kte if(smoothh.eq.0)then ifs=max(its,ids+4) ife=min(ite,ide-5) jfs=max(jts,jds+4) jfe=min(jte,jde-5) do i=ifs,ife do j=jfs,jfe rthcuten(i,k,j)=RTHcutent(i,k,j) rqvcuten(i,k,j)=RQVcutent(i,k,j) enddo ! end j enddo ! end j else if(smoothh.eq.1)then ! smooth ifs=max(its,ids) ife=min(ite,ide-1) jfs=max(jts,jds) jfe=min(jte,jde-1) ! we need an extra row for j (halo comp) !if(jts.eq.jps)jfs=max(jts-1,jds) !if(jte.eq.jpe)jfe=min(jte+1,jde-1) jfs=max(jts-1,jds) jfe=min(jte+1,jde-1) do i=ifs,ife do j=jfs,jfe smTT(i,j)=.25*(RTHcutent(i-1,k,j)+2.*RTHcutent(i,k,j)+RTHcutent(i+1,k,j)) smTQ(i,j)=.25*(RQVcutent(i-1,k,j)+2.*RQVcutent(i,k,j)+RQVcutent(i+1,k,j)) enddo ! end j enddo ! end j ifs=max(its,ids+4) ife=min(ite,ide-5) jfs=max(jts,jds+4) jfe=min(jte,jde-5) do i=ifs,ife do j=jfs,jfe rthcuten(i,k,j)=.25*(smTT(i,j-1)+2.*smTT(i,j)+smTT(i,j+1)) rqvcuten(i,k,j)=.25*(smTQ(i,j-1)+2.*smTQ(i,j)+smTQ(i,j+1)) enddo ! end j enddo ! end i endif ! smoothh enddo ! end k ! ! check moistening rates ! ifs=max(its,ids+4) ife=min(ite,ide-5) jfs=max(jts,jds+4) jfe=min(jte,jde-5) do j=jfs,jfe do i=ifs,ife Qmemf=1. Thresh=1.e-20 do k=kts,kte if(rqvcuten(i,k,j).lt.0.)then Qmem1=moist_qv(i,k,j)+rqvcuten(i,k,j)*dt if(Qmem1.lt.Thresh)then Qmem1=rqvcuten(i,k,j) Qmem2=(Thresh-moist_qv(i,k,j))/dt Qmemf=min(Qmemf,Qmem2/Qmem1) Qmemf=max(0.,Qmemf) Qmemf=min(1.,Qmemf) endif endif enddo do k=kts,kte rqvcuten(i,k,j)=rqvcuten(i,k,j)*Qmemf rthcuten(i,k,j)=rthcuten(i,k,j)*Qmemf enddo if(present(rqccuten))then if(f_qc) then do k=kts,kte rqccuten(i,k,j)=rqccuten(i,k,j)*Qmemf enddo endif endif if(present(rqicuten))then if(f_qi) then do k=kts,kte rqicuten(i,k,j)=rqicuten(i,k,j)*Qmemf enddo endif endif raincv(I,J)=raincv(I,J)*Qmemf pratec(I,J)=pratec(I,J)*Qmemf ! ! check heating rates ! Thresh=200. Qmemf=1. Qmem1=0. do k=kts,kte Qmem1=abs(rthcuten(i,k,j))*86400. if(Qmem1.gt.Thresh)then Qmem2=Thresh/Qmem1 Qmemf=min(Qmemf,Qmem2) Qmemf=max(0.,Qmemf) endif enddo raincv(i,j)=raincv(i,j)*Qmemf pratec(i,j)=pratec(i,j)*Qmemf do k=kts,kte rqvcuten(i,k,j)=rqvcuten(i,k,j)*Qmemf rthcuten(i,k,j)=rthcuten(i,k,j)*Qmemf enddo if(present(rqccuten))then if(f_qc) then do k=kts,kte rqccuten(i,k,j)=rqccuten(i,k,j)*Qmemf enddo endif endif if(present(rqicuten))then if(f_qi) then do k=kts,kte rqicuten(i,k,j)=rqicuten(i,k,j)*Qmemf enddo endif endif if(smoothv.eq.1)then ! ! smooth for now ! do k=kts+2,kte-2 conv_TRASHT(k)= .25*(rthcuten(i,k-1,j)+2.*rthcuten(i,k,j)+rthcuten(i,k+1,j)) conv_TRASHQ(k)= .25*(rqvcuten(i,k-1,j)+2.*rqvcuten(i,k,j)+rqvcuten(i,k+1,j)) enddo do k=kts+2,kte-2 rthcuten(i,k,j)=conv_TRASHT(k) rqvcuten(i,k,j)=conv_TRASHQ(k) enddo endif do k=kts,kte rthcuten(i,k,j)=rthcuten(i,k,j)/pi_phy(i,k,j) enddo enddo ! end j enddo ! end i END SUBROUTINE CONV_GRELL_SPREAD3D !------------------------------------------------------- END MODULE module_cu_g3