Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

regtest_hwrf.csh @ 1

Last change on this file since 1 was 1, checked in by lfita, 10 years ago

-- --- Opening of the WRF+LMDZ coupling repository --- -- -

WRF: version v3.3
LMDZ: version v1818

More details in:

File size: 143.1 KB

Line
1	#!/bin/csh
2
3	# #BSUB -x # exlusive use of node (not_shared)
4	# #BSUB -a mpich_gm # at NCAR: lightning
5	# #BSUB -R "span[ptile=2]" # how many tasks per node (1 or 2)
6	#BSUB -a poe # at NCAR: bluevista
7	#BSUB -R "span[ptile=4]" # how many tasks per node (up to 8)
8	#BSUB -n 4 # number of total tasks
9	#BSUB -o regh.out # output filename (%J to add job id)
10	#BSUB -e regh.err # error filename
11	#BSUB -J regtest # job name
12	#BSUB -q share # queue
13	#BSUB -W 12:00 # wallclock time
14	#BSUB -P 48500053
15	##BSUB -P 64000400
16
17	# QSUB -q ded_4 # submit to 4 proc
18	# QSUB -l mpp_p=4 # request 4 processors
19	# QSUB -lT 21600 # max. job time limit is 6 h
20	# QSUB -lF 250Mw # max. job file size limit is 250 Megawords
21	# QSUB -eo # merge error and output into one file
22	# QSUB -o reg.out # output file name
23	# QSUB # there are no further QSUB commands
24
25	# This is a script to test the bit-for-bit reproducibility of
26	# the WRF model, when comparing single processor serial runs to
27	# OpenMP and MPI parallel runs. There are several regression tests
28	# that are performed. Failed comparisons get reported, but don't
29	# stop the script. Failed builds or forecasts force an exit from
30	# the script.
31
32	# Approximate time for completion of full test suite
33	# Compaq 733 MHz ev67 : 2.5 hours (empty)
34	# Intel 1.2 GHz (4-pe) : 3.0 hours (empty)
35	# IBM P4 : 2.0 hours (empty)
36
37	# Do we keep running even when there are BAD failures?
38
39	set KEEP_ON_RUNNING = FALSE
40	set KEEP_ON_RUNNING = TRUE
41
42	# These need to be changed for your particular set of runs. This is
43	# where email gets sent.
44
45	if ( ( `uname` == AIX ) && ( ( `hostname \| cut -c 1-2` != bs ) && \
46	( `hostname \| cut -c 1-2` != bv ) && ( `hostname \| cut -c 1-2` != be ) ) ) then
47	set FAIL_MAIL = ( ${user}@noaa.gov )
48	set GOOD_MAIL = ( ${user}@noaa.gov )
49
50	setenv MP_EAGER_LIMIT 65536
51	setenv MP_SHARED_MEMORY yes
52	setenv MP_SINGLE_THREAD yes
53	setenv MP_LABELIO yes
54	setenv MP_STDOUTMODE ordered
55
56	setenv OMP_NUM_THREADS 4
57	setenv XLSMPOPTS "parthds=4:spins=0:yields=0:stack=128000000:schedule=static"
58	setenv AIXTHREAD_SCOPE S
59	setenv AIXTHREAD_MNRATIO 1:1
60	setenv SPINLOOPTIME 1000
61	setenv YIELDLOOPTIME 1000
62	else
63	set FAIL_MAIL = ( ${user}@ucar.edu )
64	set GOOD_MAIL = ( ${user}@ucar.edu )
65	endif
66
67	unalias cd cp rm ls pushd popd mv
68	if ( ( `uname` == Linux ) \|\| ( `uname` == Darwin ) ) alias banner echo
69
70	# Get the command line input
71
72	set thedate = -999
73	set thefile = "null"
74	set thedata = "null"
75	set clrm = 0 # compile local run mmmtmp, for using clsroom cluster and local disk
76
77	# If this is a batch job (NCAR's IBMs or FSL's Intel and Alpha), we need to muck with the "input"
78	# parameters a bit.
79
80	if ( ( `uname` == AIX ) \|\| ( `hostname` == tempest ) \|\| ( `hostname \| cut -c 1-2` == ln ) ) then
81	set argv = ( -here )
82	set argv = ( -ftp )
83	set argv = ( -D today )
84	set argv = ( -env )
85	set WRFREGFILE = /mmm/users/gill/wrf.tar
86	if ( ( `uname` == AIX ) && ( ( `hostname \| cut -c 1-2` != bs ) && \
87	( `hostname \| cut -c 1-2` != bv ) && ( `hostname \| cut -c 1-2` != be ) ) ) then
88	set argv = ( -f /nbns/meso/wx22tb/regression_tests/wrf.tar )
89	else
90	set argv = ( -f wrf.tar )
91	endif
92	endif
93
94	# Where is the input data located - for a few known NCAR/MMM machines.
95
96	if ( ( `hostname` == master ) \|\| (`hostname \| cut -c 1-4` == node ) ) then
97	set WRFREGDATAEM = /big/users/gill/WRF-data-EM
98	set WRFREGDATANMM = /big/users/gill/WRF-data-NMM
99	else if ( `hostname` == jacaranda ) then
100	set WRFREGDATAEM = /jacaranda/users/gill/WRF-data-EM
101	set WRFREGDATANMM = /jacaranda/users/gill/WRF-data-NMM
102	else if ( `hostname` == stink ) then
103	set WRFREGDATAEM = /stink/gill/Regression_Tests/WRF_regression_data/processed
104	set WRFREGDATANMM = /stink/gill/Regression_Tests/WRF_regression_data/WRF-data-NMM
105	else if ( `hostname` == cape ) then
106	set WRFREGDATAEM = /cape/users/michalak/WRF-data-EM
107	set WRFREGDATANMM = /cape/users/michalak/WRF-data-NMM
108	else if ( (`hostname \| cut -c 1-6` == joshua ) \|\| \
109	( `hostname` == maple ) \|\| (`hostname \| cut -c 1-7` == service ) ) then
110	set WRFREGDATAEM = /users/gill/WRF-data-EM
111	set WRFREGDATANMM = /users/gill/WRF-data-NMM
112	else if ( ( `hostname \| cut -c 1-2` == bs ) \|\| ( `hostname` == tempest ) \|\| ( `hostname \| cut -c 1-2` == ln ) \|\| \
113	( `hostname \| cut -c 1-2` == bv ) \|\| ( `hostname \| cut -c 1-2` == be ) ) then
114	set WRFREGDATAEM = /mmm/users/gill/WRF-data-EM
115	set WRFREGDATAEM = /mmm/users/gill/WRF_regression_data/processed
116	set WRFREGDATANMM = /rap/dtc/WRF-data-NMM
117	else if ( ( `uname` == AIX ) && ( ( `hostname \| cut -c 1-2` != bs ) && \
118	( `hostname \| cut -c 1-2` != bv ) && ( `hostname \| cut -c 1-2` != be ) ) ) then
119	set WRFREGDATAEM = /nbns/meso/wx22tb/regression_tests/WRF-data-EM
120	set WRFREGDATANMM = /nbns/meso/wx22tb/regression_tests/WRF-data-NMM
121	else
122	if ( ( -d /users/gill/WRF-data-EM ) && ( -d /users/gill/WRF-data-NMM ) ) then
123	set WRFREGDATAEM = /users/gill/WRF-data-EM
124	set WRFREGDATANMM = /users/gill/WRF-data-NMM
125	else if ( ( -d /mmm/users/gill/WRF-data-EM ) && ( -d /mmm/users/gill/WRF-data-NMM ) ) then
126	set WRFREGDATAEM = /mmm/users/gill/WRF-data-EM
127	set WRFREGDATANMM = /rap/dtc/WRF-data-NMM
128	else
129	echo "stick the WRF em and nmm data somewhere, and then fill in the shell vars"
130	echo "inside this script, you NEED WRFREGDATAEM and WRFREGDATANMM set"
131	exit ( 1 )
132	endif
133	endif
134	#DAVE###################################################
135	echo DAVE em data is located at $WRFREGDATAEM
136	ls -ls $WRFREGDATAEM
137	echo DAVE nmm data is located at $WRFREGDATANMM
138	ls -ls $WRFREGDATANMM
139	banner 1
140	#set ans = "$<"
141	#DAVE###################################################
142
143	if ( $#argv == 0 ) then
144	echo "Please enter either a date for cvs checkout. ex regtest.csh -D date"
145	echo " or a file name containing WRF. ex regtest.csh -f tarfile"
146	echo " or the -ftp flag for the script to pick code off anon ftp"
147	exit ( 2 )
148	endif
149
150	set theargs = 0
151	foreach a ( $argv )
152	if ( "$a" == "-D" ) then
153
154	rsh -n maple.mmm.ucar.edu w >& /dev/null
155	if ( $status ) then
156	echo "Cannot execute a remote shell on maple.mmm.ucar.edu, where the"
157	echo "WRF code resides."
158	echo "Please check that it is up and that you have permission to rsh"
159	echo "to this host. (Create a .rhosts file)."
160	ping -c 1 maple.mmm.ucar.edu
161	exit 2
162	endif
163	setenv CVSROOT maple.mmm.ucar.edu:/data3/mp/wrfhelp/WRF
164
165	set acquire_from = "cvs"
166	set thedate = $argv[2]
167
168	endif
169
170	if ( "$a" == "-f" ) then
171
172	set thefile = $argv[2]
173	# Check for absolute path, if not, make it absolute
174	echo $thefile \| grep '^/' > /dev/null
175	if ( $status != 0 ) set thefile = `pwd`/$thefile
176	set acquire_from = "filearg"
177
178	endif
179
180	if ( "$a" == "-ftp" ) then
181	set acquire_from = "ftp"
182	echo "anon ftp temporarily disabled"
183	exit ( 3 )
184	endif
185
186	if ( "$a" == "-here" ) then
187	set acquire_from = "here"
188	endif
189
190	if ( "$a" == "-env" ) then
191	set acquire_from = "environment"
192	set thefile = $WRFREGFILE
193	endif
194	end
195
196	# Start recording everything - for debug purposes.
197
198	set echo
199	set date
200
201	# And to tell us how long we've spent on this whole regression test,
202	# we should remember when we started.
203
204	set start = ( `date` )
205
206	#####################################################################
207
208	# Initial set up values
209
210	# Is this a single domain regression test or is this nested. Well, a nested one
211	# is a bit special. It can only run on machines that have the WRF RSL_LITE-but-no-MPI
212	# option available.
213
214	set NESTED = TRUE
215	set NESTED = FALSE
216
217	if ( $NESTED == TRUE ) then
218	echo DOING a NESTED TEST
219	endif
220
221	# Use the adaptive time step option
222
223	set ADAPTIVE = TRUE
224	set ADAPTIVE = FALSE
225
226	if ( $ADAPTIVE == TRUE ) then
227	set STEP_TO_OUTPUT_TIME = .TRUE.
228	set USE_ADAPTIVE_TIME_STEP = .TRUE.
229	else
230	set STEP_TO_OUTPUT_TIME = .FALSE.
231	set USE_ADAPTIVE_TIME_STEP = .FALSE.
232	endif
233
234	# We can choose to do grid and obs nudging tests.
235
236	set FDDA = TRUE
237	set FDDA = FALSE
238
239	set FDDA2 = TRUE
240	set FDDA2 = FALSE
241
242	if ( $FDDA2 == TRUE ) then
243	set FDDA = TRUE
244	endif
245
246	# We can choose to do hwrf tests.
247
248	set HWRF = FALSE
249	set HWRF = TRUE
250
251	# The default floating point precision is either 4 bytes or 8 bytes.
252	# We assume that it is 4 (or the default for the architecture) unless
253	# REAL8 is set to TRUE.
254
255	set REAL8 = TRUE
256	set REAL8 = FALSE
257
258	# Are we shooting for a bit-for-bit run (serial vs OpenMP, serial vs MPI), or not?
259	# If you want to do a performance-only run, the forecasts are still short, but you
260	# get to insure that the optimized code builds and runs.
261
262	set REG_TYPE = OPTIMIZED
263	set REG_TYPE = BIT4BIT
264
265	# For a Mac/Intel, we can run either g95 or PGI.
266
267	if ( `uname` == Darwin ) then
268	set LINUX_COMP = G95
269	set LINUX_COMP = PGI
270	endif
271
272	# We can choose to do a global test
273
274	if ( $NESTED != TRUE ) then
275	set GLOBAL = TRUE
276	set GLOBAL = FALSE
277	else if ( $NESTED == TRUE ) then
278	set GLOBAL = FALSE
279	endif
280
281	# Is this a WRF chem test?
282	# if CHEM = TRUE, then chemistry run
283	# if KPP = TRUE, then chemistry with KPP run (CHEM set to true)
284
285	if ( $NESTED != TRUE ) then
286	set KPP = TRUE
287	set KPP = FALSE
288	set CHEM = TRUE
289	set CHEM = FALSE
290	if ( $KPP == TRUE ) then
291	set CHEM = TRUE
292	endif
293	else if ( $NESTED == TRUE ) then
294	set CHEM = FALSE
295	set KPP = FALSE
296	endif
297	if ( $CHEM == TRUE ) then
298	setenv WRF_CHEM 1
299	else if ( $CHEM == FALSE ) then
300	setenv WRF_CHEM 0
301	endif
302	if ( $KPP == TRUE ) then
303	setenv WRF_KPP 1
304	setenv FLEX_LIB_DIR /usr/local/lib
305	set CHEM_OPT = 104
306	else if ( $KPP == FALSE ) then
307	setenv WRF_KPP 0
308	setenv FLEX_LIB_DIR
309	set CHEM_OPT =
310	endif
311
312	# For the real data case, we can run either one of two data cases. If this is
313	# a chemistry run, we are forced to use that data.
314
315	set dataset = jun01
316	set dataset = jan00
317	if ( $CHEM == TRUE ) then
318	set dataset = chem
319	endif
320	if ( $GLOBAL == TRUE ) then
321	set dataset = global
322	endif
323
324	# Yet another local variable to change the name of where the data is located.
325
326	set thedataem = ${WRFREGDATAEM}/${dataset}
327	set thedatanmm = $WRFREGDATANMM
328
329	# A separately installed version of the latest ESMF library (NOT the
330	# ESMF library included in the WRF tarfile) can be tested by setting
331	# "ESMF_LIB" to "TRUE" below. This test is not supported on all
332	# machines.
333
334	set ESMF_LIB = TRUE
335	set ESMF_LIB = FALSE
336
337	# serial and OMP are not tested with ESMF so always start with env vars cleared
338	unsetenv ESMFLIB
339	unsetenv ESMFINC
340
341	if ( $ESMF_LIB == TRUE ) then
342	if ( ( `uname` == AIX ) && ( ( `hostname \| cut -c 1-2` == bv ) \|\| ( `hostname \| cut -c 1-2` == be ) ) ) then
343	echo "A separately installed version of the latest ESMF library"
344	echo "(NOT the ESMF library included in the WRF tarfile) will"
345	echo "be used for MPI tests"
346	setenv OBJECT_MODE 64
347	# set ESMFLIBSAVE = /home/bluevista/hender/esmf/esmf_2_2_2r/lib/libO/AIX.default.64.mpi.default
348	# set ESMFINCSAVE = /home/bluevista/hender/esmf/esmf_2_2_2r/mod/modO/AIX.default.64.mpi.default
349	setenv ESMF_DIR /mmm/users/michalak/esmf
350	setenv ESMF_BOPT g
351	setenv ESMF_ABI 64
352	setenv ESMF_INSTALL_PREFIX $ESMF_DIR/../esmf_install
353	setenv ESMFLIB $ESMF_INSTALL_PREFIX/lib/libg/AIX.default.64.mpi.default
354	setenv ESMFINC $ESMF_INSTALL_PREFIX/mod/modg/AIX.default.64.mpi.default
355	set ESMFLIBSAVE = $ESMFLIB
356	set ESMFINCSAVE = $ESMFINC
357	echo "Using ESMFLIB = ${ESMFLIBSAVE}"
358	echo "Using ESMFINC = ${ESMFINCSAVE}"
359	else
360	echo "Only the ESMF library included in the WRF tarfile is"
361	echo "tested on this machine"
362	exit ( 3 )
363	endif
364	if ( $NESTED == TRUE ) then
365	echo "The ESMF library does not work with nesting."
366	exit ( 3 )
367	endif
368	endif
369
370	# A single WRF output "quilt" server can be tested by setting "QUILT" to
371	# "TRUE" below. At the moment, testing of I/O quilt servers is not supported
372	# on all machines.
373
374	set QUILT = TRUE
375	set QUILT = FALSE
376
377	if ( $QUILT == TRUE ) then
378	echo "One WRF output quilt server will be used for some tests"
379	endif
380
381	# Baseline data sets can be generated and archived or compared against.
382	# - To generate and archive, set GENERATE_BASELINE to a pathname that can
383	# be created by this script via "mkdir -p $GENERATE_BASELINE". This
384	# directory must not already exist.
385	# Set GENERATE_BASELINE = FALSE to avoid baseline generation.
386	# - To compare with a previously archived baseline, set COMPARE_BASELINE
387	# to an existing directory that contains an archived baseline.
388	# Set COMPARE_BASELINE = FALSE to avoid baseline comparison.
389	set GENERATE_BASELINE = FALSE
390	set COMPARE_BASELINE = FALSE
391
392	# Baseline generation and comparison are only done when BIT4BIT is set.
393	if ( $GENERATE_BASELINE != FALSE ) then
394	if ( $REG_TYPE != BIT4BIT ) then
395	echo "ERROR: Baseline generation can only be done during BIT4BIT tests."
396	exit ( 3 )
397	endif
398	if ( -d $GENERATE_BASELINE ) then
399	echo "ERROR: Baseline directory ${GENERATE_BASELINE} already exists."
400	exit ( 3 )
401	else
402	# Archive serial output file to baseline
403	mkdir -p $GENERATE_BASELINE \|\| ( echo "ERROR: cannot mkdir ${GENERATE_BASELINE}"; exit 3 )
404	endif
405	endif
406	if ( $COMPARE_BASELINE != FALSE ) then
407	if ( $REG_TYPE != BIT4BIT ) then
408	echo "Baseline comparison can only be done during BIT4BIT tests."
409	exit ( 3 )
410	endif
411	if ( ! -d $COMPARE_BASELINE ) then
412	echo "${0}: ERROR: Baseline directory ${COMPARE_BASELINE} does not exist"
413	exit ( 3 )
414	endif
415	endif
416
417	# Set the input/output format type (currently 1, 2 or 5 OK).
418	# Binary NetCDF PHDF, IBM GriB, history only
419	# 1 2 3 4 5
420
421	set IO_FORM = 2
422	set IO_FORM_NAME = ( io_bin io_netcdf io_dummy io_phdf5 io_grib1 )
423	set IO_FORM_WHICH =( IO IO IO IO O )
424
425	# There is a breakdown of cores to test depending on the various
426	# options that the user is testing.
427	# nested: cannot test NMM
428	# rsl_lite: cannot test anything with y periodic bc
429	# chem: em_real only
430	# esmf_lib: cannot test NMM
431	# grib output: cannot test NMM
432
433	if ( $NESTED == TRUE ) then
434	set CORES = ( em_real em_b_wave em_quarter_ss )
435	else if ( $NESTED != TRUE ) then
436	set CORES = ( em_real em_b_wave em_quarter_ss nmm_real )
437	set CORES = ( nmm_real )
438	if ( $CHEM == TRUE ) then
439	set CORES = ( em_real em_real )
440	endif
441	if ( $GLOBAL == TRUE ) then
442	set CORES = ( em_real )
443	endif
444	if ( $ADAPTIVE == TRUE ) then
445	set CORES = ( em_real )
446	endif
447	if ( $ESMF_LIB == TRUE ) then
448	set CORES = ( em_real em_b_wave em_quarter_ss )
449	endif
450	if ( $IO_FORM_NAME[$IO_FORM] == io_grib1 ) then
451	set CORES = ( em_real em_b_wave em_quarter_ss )
452	endif
453	if ( $FDDA == TRUE ) then
454	set CORES = ( em_real )
455	endif
456	if ( $HWRF == TRUE ) then
457	set CORES = ( nmm_real )
458	endif
459	endif
460
461	# The b_wave case has binary input (4-byte only), the nmm
462	# core has raw MPI calls, skip them if we are doing real*8 floats.
463
464	if ( $REAL8 == TRUE ) then
465	set CORES = ( em_real em_quarter_ss )
466	endif
467
468	if ( ( $CHEM != TRUE ) && ( $FDDA != TRUE ) && ( $NESTED != TRUE ) && ( $REAL8 != TRUE ) && ( $GLOBAL != TRUE ) ) then
469	set PHYSOPTS = ( 1 2 3 4 5 6 7 )
470	else if ( ( $CHEM != TRUE ) && ( $FDDA != TRUE ) && ( ( $NESTED == TRUE ) \|\| ( $REAL8 == TRUE ) \|\| ( $GLOBAL == TRUE ) ) ) then
471	set PHYSOPTS = ( 1 2 3 4 5 6 )
472	else if ( ( $CHEM != TRUE ) && ( $FDDA == TRUE ) ) then
473	if ( $FDDA2 == TRUE ) then
474	set PHYSOPTS_FDDA = BOTH
475	else
476	set PHYSOPTS_FDDA = GRID
477	endif
478	if ( $PHYSOPTS_FDDA == GRID ) then
479	set PHYSOPTS = ( 1 )
480	else
481	set PHYSOPTS = ( 1 2 3 )
482	endif
483	else if ( $CHEM == TRUE ) then
484	set PHYSOPTS = ( 1 2 3 4 5 6 )
485	endif
486
487
488	# This is selecting the ideal physics options - mostly selecting BC options.
489	# With no nesting, run all three ideal physics options.
490
491	if ( $NESTED == TRUE ) then
492	set Max_Ideal_Physics_Options = 2
493	else if ( $NESTED != TRUE ) then
494	set Max_Ideal_Physics_Options = 3
495	endif
496
497	set CUR_DIR = `pwd`
498
499	# How many domains to run (nest tests). Only em_real and ideals use this.
500	# The max is 3 due to the number of columns in the namelist that are
501	# currently filled in.
502
503	if ( $NESTED == TRUE ) then
504	if ( $dataset == jan00 ) then
505	cat >! dom_real << EOF
506	time_step = 180,
507	time_step_fract_num = 0,
508	time_step_fract_den = 1,
509	max_dom = 2,
510	s_we = 1, 1, 1,
511	e_we = 74, 31, 31,
512	s_sn = 1, 1, 1,
513	e_sn = 61, 31, 31,
514	s_vert = 1, 1, 1,
515	e_vert = 28, 28, 28,
516	dx = 30000, 10000, 3333.333333,
517	dy = 30000, 10000, 3333.333333,
518	grid_id = 1, 2, 3,
519	parent_id = 0, 1, 2,
520	i_parent_start = 0, 31, 11,
521	j_parent_start = 0, 17, 11,
522	parent_grid_ratio = 1, 3, 3,
523	parent_time_step_ratio = 1, 3, 3,
524	feedback = 1,
525	smooth_option = 0
526	num_moves = 3
527	move_id = 2 , 2 , 2
528	move_interval = 3 , 6 , 9
529	move_cd_x = 1 , 1 , 1
530	move_cd_y = 1 , 1 , 1
531	use_adaptive_time_step = $USE_ADAPTIVE_TIME_STEP
532	step_to_output_time = $STEP_TO_OUTPUT_TIME
533	EOF
534	else if ( $dataset == jun01 ) then
535	cat >! dom_real << EOF
536	time_step = 60,
537	time_step_fract_num = 0,
538	time_step_fract_den = 1,
539	max_dom = 2,
540	s_we = 1, 1, 1,
541	e_we = 91, 31, 31,
542	s_sn = 1, 1, 1,
543	e_sn = 82, 31, 31,
544	s_vert = 1, 1, 1,
545	e_vert = 28, 28, 28,
546	dx = 10000, 3333.333333, 1111.111111,
547	dy = 10000, 3333.333333, 1111.111111,
548	grid_id = 1, 2, 3,
549	parent_id = 0, 1, 2,
550	i_parent_start = 0, 30, 11,
551	j_parent_start = 0, 20, 11,
552	parent_grid_ratio = 1, 3, 3,
553	parent_time_step_ratio = 1, 3, 3,
554	feedback = 1,
555	smooth_option = 0
556	num_moves = 3
557	move_id = 2 , 2 , 2
558	move_interval = 1 , 2 , 3
559	move_cd_x = 1 , 1 , 1
560	move_cd_y = 1 , 1 , 1
561	use_adaptive_time_step = $USE_ADAPTIVE_TIME_STEP
562	step_to_output_time = $STEP_TO_OUTPUT_TIME
563	EOF
564	endif
565	cat >! dom_ideal << EOF
566	max_dom = 2,
567	EOF
568	else if ( $NESTED != TRUE ) then
569	if ( $dataset == jan00 ) then
570	cat >! dom_real << EOF
571	time_step = 180,
572	time_step_fract_num = 0,
573	time_step_fract_den = 1,
574	max_dom = 1,
575	s_we = 1, 1, 1,
576	e_we = 74, 31, 31,
577	s_sn = 1, 1, 1,
578	e_sn = 61, 31, 31,
579	s_vert = 1, 1, 1,
580	e_vert = 28, 28, 28,
581	dx = 30000, 10000, 3333,
582	dy = 30000, 10000, 3333,
583	grid_id = 1, 2, 3,
584	parent_id = 0, 1, 2,
585	i_parent_start = 0, 31, 30,
586	j_parent_start = 0, 17, 30,
587	parent_grid_ratio = 1, 3, 3,
588	parent_time_step_ratio = 1, 3, 3,
589	feedback = 1,
590	smooth_option = 0
591	use_adaptive_time_step = $USE_ADAPTIVE_TIME_STEP
592	step_to_output_time = $STEP_TO_OUTPUT_TIME
593	EOF
594	else if ( $dataset == jun01 ) then
595	cat >! dom_real << EOF
596	time_step = 60,
597	time_step_fract_num = 0,
598	time_step_fract_den = 1,
599	max_dom = 1,
600	s_we = 1, 1, 1,
601	e_we = 91, 31, 31,
602	s_sn = 1, 1, 1,
603	e_sn = 82, 31, 31,
604	s_vert = 1, 1, 1,
605	e_vert = 28, 28, 28,
606	dx = 10000, 3333.333333, 1111.111111,
607	dy = 10000, 3333.333333, 1111.111111,
608	grid_id = 1, 2, 3,
609	parent_id = 0, 1, 2,
610	i_parent_start = 0, 30, 11,
611	j_parent_start = 0, 20, 11,
612	parent_grid_ratio = 1, 3, 3,
613	parent_time_step_ratio = 1, 3, 3,
614	feedback = 1,
615	smooth_option = 0
616	use_adaptive_time_step = $USE_ADAPTIVE_TIME_STEP
617	step_to_output_time = $STEP_TO_OUTPUT_TIME
618	EOF
619	else if ( $dataset == global ) then
620	cat >! dom_real << EOF
621	time_step = 600
622	time_step_fract_num = 00
623	time_step_fract_den = 112
624	max_dom = 1,
625	s_we = 1, 1, 1,
626	e_we = 65, 41, 41,
627	s_sn = 1, 1, 1,
628	e_sn = 33, 81, 81,
629	s_vert = 1, 1, 1,
630	e_vert = 41, 41, 41,
631	num_metgrid_levels = 27
632	dx = 625373.288,20000, 4000,
633	dy = 625373.288,20000, 4000,
634	p_top_requested = 5000
635	grid_id = 1, 2, 3,
636	parent_id = 0, 1, 2,
637	i_parent_start = 0, 17, 17,
638	j_parent_start = 0, 33, 33,
639	parent_grid_ratio = 1, 5, 5,
640	parent_time_step_ratio = 1, 5, 5,
641	feedback = 1,
642	smooth_option = 00
643	EOF
644	endif
645	cat >! dom_ideal << EOF
646	max_dom = 1,
647	EOF
648	endif
649
650	# The em_real entire physics namelist. Change what you want.
651
652	cat >! phys_real_1 << EOF
653	mp_physics = 3, 3, 3,
654	ra_lw_physics = 1, 1, 1,
655	ra_sw_physics = 1, 1, 1,
656	radt = 30, 30, 30,
657	sf_sfclay_physics = 1, 1, 1,
658	sf_surface_physics = 1, 1, 1,
659	bl_pbl_physics = 1, 1, 1,
660	bldt = 0, 0, 0,
661	cu_physics = 1, 1, 0,
662	cudt = 5, 5, 5,
663	isfflx = 1,
664	ifsnow = 0,
665	icloud = 1,
666	surface_input_source = 1,
667	num_soil_layers = 5,
668	mp_zero_out = 0,
669	maxiens = 1,
670	maxens = 3,
671	maxens2 = 3,
672	maxens3 = 16,
673	ensdim = 144,
674	EOF
675
676	cat >! dyn_real_SAFE << EOF
677	moist_adv_opt = 0, 0, 0,
678	scalar_adv_opt = 0, 0, 0,
679	chem_adv_opt = 0, 0, 0,
680	tke_adv_opt = 0, 0, 0,
681	EOF
682
683	cat >! dyn_real_1 << EOF
684	moist_adv_opt = 1, 1, 1,
685	scalar_adv_opt = 0, 0, 0,
686	chem_adv_opt = 0, 0, 0,
687	tke_adv_opt = 0, 0, 0,
688	EOF
689
690	cat >! time_real_1 << EOF
691	auxinput1_inname = "met_em.d<domain>.<date>"
692	EOF
693
694	cat >! nest_real_1 << EOF
695	input_from_file = .true.,.false.,.false.
696	EOF
697
698	cat >! damp_real_1 << EOF
699	damp_opt = 0,
700	zdamp = 5000., 5000., 5000.,
701	dampcoef = 0.01, 0.01, 0.01
702	EOF
703
704	cat >! phys_real_2 << EOF
705	mp_physics = 4, 4, 4,
706	ra_lw_physics = 1, 1, 1,
707	ra_sw_physics = 1, 1, 1,
708	radt = 30, 30, 30,
709	sf_sfclay_physics = 2, 2, 2,
710	sf_surface_physics = 2, 2, 2,
711	bl_pbl_physics = 2, 2, 2,
712	bldt = 0, 0, 0,
713	cu_physics = 2, 2, 0,
714	cudt = 5, 5, 5,
715	slope_rad = 1, 1, 1,
716	topo_shading = 0, 0, 0,
717	isfflx = 1,
718	ifsnow = 0,
719	icloud = 1,
720	surface_input_source = 1,
721	num_soil_layers = 4,
722	mp_zero_out = 0,
723	maxiens = 1,
724	maxens = 3,
725	maxens2 = 3,
726	maxens3 = 16,
727	ensdim = 144,
728	EOF
729
730	cat >! dyn_real_2 << EOF
731	moist_adv_opt = 1, 1, 1,
732	scalar_adv_opt = 0, 0, 0,
733	chem_adv_opt = 0, 0, 0,
734	tke_adv_opt = 0, 0, 0,
735	EOF
736
737	if ( $GLOBAL == TRUE ) then
738	cp dyn_real_SAFE dyn_real_2
739	endif
740
741	cat >! time_real_2 << EOF
742	auxinput1_inname = "met_em.d<domain>.<date>"
743	EOF
744
745	cat >! nest_real_2 << EOF
746	input_from_file = .true.,.false.,.false.
747	EOF
748
749	cat >! damp_real_2 << EOF
750	damp_opt = 0,
751	zdamp = 5000., 5000., 5000.,
752	dampcoef = 0.01, 0.01, 0.01
753	EOF
754
755	cat >! phys_real_3 << EOF
756	mp_physics = 5, 5, 5,
757	ra_lw_physics = 1, 1, 1,
758	ra_sw_physics = 2, 2, 2,
759	radt = 30, 30, 30,
760	sf_sfclay_physics = 2, 2, 2,
761	sf_surface_physics = 3, 3, 3,
762	bl_pbl_physics = 2, 2, 2,
763	bldt = 0, 0, 0,
764	cu_physics = 3, 3, 0,
765	cudt = 5, 5, 5,
766	omlcall = 1,
767	oml_hml0 = 50,
768	oml_gamma = 0.14
769	isfflx = 1,
770	ifsnow = 0,
771	icloud = 1,
772	surface_input_source = 1,
773	num_soil_layers = 6,
774	mp_zero_out = 0,
775	maxiens = 1,
776	maxens = 3,
777	maxens2 = 3,
778	maxens3 = 16,
779	ensdim = 144,
780	EOF
781
782	cat >! dyn_real_3 << EOF
783	moist_adv_opt = 2, 2, 2,
784	scalar_adv_opt = 0, 0, 0,
785	chem_adv_opt = 0, 0, 0,
786	tke_adv_opt = 0, 0, 0,
787	EOF
788
789	cat >! time_real_3 << EOF
790	auxinput1_inname = "met_em.d<domain>.<date>"
791	EOF
792
793	cat >! nest_real_3 << EOF
794	input_from_file = .true.,.false.,.false.
795	EOF
796
797	cat >! damp_real_3 << EOF
798	damp_opt = 1,
799	zdamp = 5000., 5000., 5000.,
800	dampcoef = 0.01, 0.01, 0.01
801	EOF
802
803	cat >! phys_real_4 << EOF
804	mp_physics = 6, 6, 6,
805	ra_lw_physics = 1, 1, 1,
806	ra_sw_physics = 2, 2, 2,
807	radt = 30, 30, 30,
808	sf_sfclay_physics = 2, 2, 2,
809	sf_surface_physics = 2, 2, 2,
810	bl_pbl_physics = 2, 2, 2,
811	bldt = 0, 0, 0,
812	cu_physics = 5, 5, 0,
813	cudt = 5, 5, 5,
814	isfflx = 1,
815	ifsnow = 0,
816	icloud = 1,
817	sf_urban_physics = 1, 1, 1,
818	surface_input_source = 1,
819	num_soil_layers = 4,
820	mp_zero_out = 0,
821	maxiens = 1,
822	maxens = 3,
823	maxens2 = 3,
824	maxens3 = 16,
825	ensdim = 144,
826	EOF
827
828	cat >! dyn_real_4 << EOF
829	moist_adv_opt = 2, 2, 2,
830	scalar_adv_opt = 0, 0, 0,
831	chem_adv_opt = 0, 0, 0,
832	tke_adv_opt = 0, 0, 0,
833	EOF
834
835	cat >! time_real_4 << EOF
836	auxinput1_inname = "met_em.d<domain>.<date>"
837	EOF
838
839	cat >! nest_real_4 << EOF
840	input_from_file = .true.,.false.,.false.
841	EOF
842
843	cat >! damp_real_4 << EOF
844	damp_opt = 1,
845	zdamp = 5000., 5000., 5000.,
846	dampcoef = 0.01, 0.01, 0.01
847	EOF
848
849	cat >! phys_real_5 << EOF
850	mp_physics = 10, 10, 10,
851	ra_lw_physics = 1, 1, 1,
852	ra_sw_physics = 1, 1, 1,
853	radt = 30, 30, 30,
854	sf_sfclay_physics = 7, 7, 7,
855	sf_surface_physics = 1, 1, 1,
856	bl_pbl_physics = 7, 7, 7,
857	bldt = 0, 0, 0,
858	cu_physics = 99, 99, 0,
859	cudt = 0, 0, 0,
860	slope_rad = 1, 1, 1,
861	topo_shading = 0, 0, 0,
862	isfflx = 1,
863	ifsnow = 0,
864	icloud = 1,
865	sf_urban_physics = 1, 1, 1,
866	surface_input_source = 1,
867	num_soil_layers = 5,
868	mp_zero_out = 0,
869	maxiens = 1,
870	maxens = 3,
871	maxens2 = 3,
872	maxens3 = 16,
873	ensdim = 144,
874	levsiz = 59
875	paerlev = 29
876	cam_abs_freq_s = 21600
877	cam_abs_dim1 = 4
878	cam_abs_dim2 = 28
879	EOF
880
881	cat >! dyn_real_5 << EOF
882	moist_adv_opt = 2, 2, 2,
883	scalar_adv_opt = 0, 0, 0,
884	chem_adv_opt = 0, 0, 0,
885	tke_adv_opt = 0, 0, 0,
886	EOF
887
888	cat >! time_real_5 << EOF
889	auxinput1_inname = "met_em.d<domain>.<date>"
890	EOF
891
892	cat >! nest_real_5 << EOF
893	input_from_file = .true.,.false.,.false.
894	EOF
895
896	cat >! damp_real_5 << EOF
897	damp_opt = 3,
898	zdamp = 5000., 5000., 5000.,
899	dampcoef = 0.05, 0.05, 0.05
900	EOF
901
902	cat >! phys_real_6 << EOF
903	mp_physics = 7, 7, 7,
904	ra_lw_physics = 1, 1, 1,
905	ra_sw_physics = 2, 2, 2,
906	radt = 30, 30, 30,
907	sf_sfclay_physics = 7, 7, 7,
908	sf_surface_physics = 1, 1, 1,
909	bl_pbl_physics = 7, 7, 7,
910	bldt = 0, 0, 0,
911	cu_physics = 1, 1, 0,
912	cudt = 0, 0, 0,
913	omlcall = 1,
914	oml_hml0 = 50,
915	oml_gamma = 0.14
916	isfflx = 1,
917	ifsnow = 0,
918	icloud = 1,
919	sf_urban_physics = 1, 1, 1,
920	surface_input_source = 1,
921	num_soil_layers = 5,
922	mp_zero_out = 0,
923	maxiens = 1,
924	maxens = 3,
925	maxens2 = 3,
926	maxens3 = 16,
927	ensdim = 144,
928	levsiz = 59
929	paerlev = 29
930	cam_abs_freq_s = 21600
931	cam_abs_dim1 = 4
932	cam_abs_dim2 = 28
933	EOF
934
935	cat >! dyn_real_6 << EOF
936	moist_adv_opt = 0, 0, 0,
937	scalar_adv_opt = 0, 0, 0,
938	chem_adv_opt = 0, 0, 0,
939	tke_adv_opt = 0, 0, 0,
940	EOF
941
942	cat >! time_real_6 << EOF
943	auxinput1_inname = "met_em.d<domain>.<date>"
944	EOF
945
946	cat >! nest_real_6 << EOF
947	input_from_file = .true.,.false.,.false.
948	EOF
949
950	cat >! damp_real_6 << EOF
951	damp_opt = 3,
952	zdamp = 5000., 5000., 5000.,
953	dampcoef = 0.05, 0.05, 0.05
954	EOF
955
956	cat >! phys_real_7 << EOF
957	mp_physics = 8, 8, 8,
958	ra_lw_physics = 3, 3, 3,
959	ra_sw_physics = 3, 3, 3,
960	radt = 30, 30, 30,
961	sf_sfclay_physics = 2, 2, 2,
962	sf_surface_physics = 2, 2, 2,
963	bl_pbl_physics = 2, 2, 2,
964	bldt = 0, 0, 0,
965	cu_physics = 99, 99, 0,
966	cudt = 5, 5, 5,
967	isfflx = 1,
968	ifsnow = 0,
969	icloud = 1,
970	sf_urban_physics = 1, 1, 1,
971	surface_input_source = 1,
972	num_soil_layers = 4,
973	mp_zero_out = 0,
974	maxiens = 1,
975	maxens = 3,
976	maxens2 = 3,
977	maxens3 = 16,
978	ensdim = 144,
979	levsiz = 59
980	paerlev = 29
981	cam_abs_freq_s = 21600
982	cam_abs_dim1 = 4
983	cam_abs_dim2 = 28
984	EOF
985
986	cat >! dyn_real_7 << EOF
987	moist_adv_opt = 0, 0, 0,
988	scalar_adv_opt = 0, 0, 0,
989	chem_adv_opt = 0, 0, 0,
990	tke_adv_opt = 0, 0, 0,
991	EOF
992
993	cat >! time_real_7 << EOF
994	auxinput1_inname = "met_em.d<domain>.<date>"
995	EOF
996
997	cat >! nest_real_7 << EOF
998	input_from_file = .true.,.false.,.false.
999	EOF
1000
1001	cat >! damp_real_7 << EOF
1002	damp_opt = 3,
1003	zdamp = 5000., 5000., 5000.,
1004	dampcoef = 0.05, 0.05, 0.05
1005	EOF
1006
1007	if ( $GLOBAL == TRUE ) then
1008	sed -e 's/ cam_abs_dim2 *= [0-9][0-9]/ cam_abs_dim2 = 41/g' phys_real_5 >! phys_foo
1009	mv phys_foo phys_real_7
1010	cp dyn_real_SAFE dyn_real_1
1011	cp dyn_real_SAFE dyn_real_2
1012	cp dyn_real_SAFE dyn_real_3
1013	cp dyn_real_SAFE dyn_real_4
1014	cp dyn_real_SAFE dyn_real_5
1015	cp dyn_real_SAFE dyn_real_6
1016	cp dyn_real_SAFE dyn_real_7
1017	endif
1018
1019	cat >! fdda_real_1 << EOF
1020	grid_fdda = 1, 1, 1,
1021	gfdda_inname = "wrffdda_d<domain>",
1022	gfdda_end_h = 24, 24, 24,
1023	gfdda_interval_m = 360, 360, 360,
1024	fgdt = 0, 0, 0,
1025	if_no_pbl_nudging_uv = 0, 0, 1,
1026	if_no_pbl_nudging_t = 0, 0, 1,
1027	if_no_pbl_nudging_q = 0, 0, 1,
1028	if_zfac_uv = 0, 0, 1,
1029	k_zfac_uv = 10, 10, 1,
1030	if_zfac_t = 0, 0, 1,
1031	k_zfac_t = 10, 10, 1,
1032	if_zfac_q = 0, 0, 1,
1033	k_zfac_q = 10, 10, 1,
1034	guv = 0.0003, 0.0003, 0.0003,
1035	gt = 0.0003, 0.0003, 0.0003,
1036	gq = 0.0003, 0.0003, 0.0003,
1037	if_ramping = 1,
1038	dtramp_min = 360.0,
1039	io_form_gfdda = 2,
1040	EOF
1041
1042	cat >! fdda_real_time_1 << EOF
1043	EOF
1044
1045	cat >! fdda_real_2 << EOF
1046	obs_nudge_opt = 1,1,1,1,1
1047	max_obs = 150000,
1048	obs_nudge_wind = 1,1,1,1,1
1049	obs_coef_wind = 6.E-4,6.E-4,6.E-4,6.E-4,6.E-4
1050	obs_nudge_temp = 1,1,1,1,1
1051	obs_coef_temp = 6.E-4,6.E-4,6.E-4,6.E-4,6.E-4
1052	obs_nudge_mois = 1,1,1,1,1
1053	obs_coef_mois = 6.E-4,6.E-4,6.E-4,6.E-4,6.E-4
1054	obs_rinxy = 240.,240.,180.,180,180
1055	obs_rinsig = 0.1,
1056	obs_twindo = 40.
1057	obs_npfi = 10,
1058	obs_ionf = 2,
1059	obs_idynin = 0,
1060	obs_dtramp = 40.,
1061	obs_ipf_errob = .true.
1062	obs_ipf_nudob = .true.
1063	obs_ipf_in4dob = .true.
1064	EOF
1065
1066	cat >! fdda_real_time_2 << EOF
1067	auxinput11_interval_s = 180
1068	auxinput11_end_h = 6
1069	EOF
1070
1071	cat >! fdda_real_3 << EOF
1072	grid_fdda = 1, 1, 1,
1073	gfdda_inname = "wrffdda_d<domain>",
1074	gfdda_end_h = 24, 24, 24,
1075	gfdda_interval_m = 360, 360, 360,
1076	fgdt = 0, 0, 0,
1077	if_no_pbl_nudging_uv = 0, 0, 1,
1078	if_no_pbl_nudging_t = 0, 0, 1,
1079	if_no_pbl_nudging_q = 0, 0, 1,
1080	if_zfac_uv = 0, 0, 1,
1081	k_zfac_uv = 10, 10, 1,
1082	if_zfac_t = 0, 0, 1,
1083	k_zfac_t = 10, 10, 1,
1084	if_zfac_q = 0, 0, 1,
1085	k_zfac_q = 10, 10, 1,
1086	guv = 0.0003, 0.0003, 0.0003,
1087	gt = 0.0003, 0.0003, 0.0003,
1088	gq = 0.0003, 0.0003, 0.0003,
1089	if_ramping = 1,
1090	dtramp_min = 360.0,
1091	io_form_gfdda = 2,
1092	obs_nudge_opt = 1,1,1,1,1
1093	max_obs = 150000,
1094	obs_nudge_wind = 1,1,1,1,1
1095	obs_coef_wind = 6.E-4,6.E-4,6.E-4,6.E-4,6.E-4
1096	obs_nudge_temp = 1,1,1,1,1
1097	obs_coef_temp = 6.E-4,6.E-4,6.E-4,6.E-4,6.E-4
1098	obs_nudge_mois = 1,1,1,1,1
1099	obs_coef_mois = 6.E-4,6.E-4,6.E-4,6.E-4,6.E-4
1100	obs_rinxy = 240.,240.,180.,180,180
1101	obs_rinsig = 0.1,
1102	obs_twindo = 40.
1103	obs_npfi = 10,
1104	obs_ionf = 2,
1105	obs_idynin = 0,
1106	obs_dtramp = 40.,
1107	obs_ipf_errob = .true.
1108	obs_ipf_nudob = .true.
1109	obs_ipf_in4dob = .true.
1110	EOF
1111
1112	cat >! fdda_real_time_3 << EOF
1113	auxinput11_interval_s = 180
1114	auxinput11_end_h = 6
1115	EOF
1116
1117	# Tested options for ideal case em_b_wave. Modifying these
1118	# parameters is acceptable. Adding to these requires changes
1119	# to the ideal namelist build below.
1120
1121	cat >! phys_b_wave_1a << EOF
1122	diff_opt = 1,
1123	km_opt = 1,
1124	damp_opt = 0,
1125	EOF
1126	cat >! phys_b_wave_1b << EOF
1127	mp_physics = 1, 1, 1,
1128	EOF
1129	cat >! phys_b_wave_1c << EOF
1130	non_hydrostatic = .true., .true., .true.,
1131	EOF
1132	cat >! phys_b_wave_1d << EOF
1133	input_from_file = .true.,.false.,.false.
1134	EOF
1135
1136	cat >! phys_b_wave_2a << EOF
1137	diff_opt = 1,
1138	km_opt = 1,
1139	damp_opt = 0,
1140	EOF
1141	cat >! phys_b_wave_2b << EOF
1142	mp_physics = 1, 1, 1,
1143	EOF
1144	cat >! phys_b_wave_2c << EOF
1145	non_hydrostatic = .false., .false., .false.,
1146	EOF
1147	cat >! phys_b_wave_2d << EOF
1148	input_from_file = .true.,.false.,.false.
1149	EOF
1150
1151	cat >! phys_b_wave_3a << EOF
1152	diff_opt = 1,
1153	km_opt = 1,
1154	damp_opt = 0,
1155	EOF
1156	cat >! phys_b_wave_3b << EOF
1157	mp_physics = 2, 2, 2,
1158	EOF
1159	cat >! phys_b_wave_3c << EOF
1160	non_hydrostatic = .false., .false., .false.,
1161	EOF
1162	cat >! phys_b_wave_3d << EOF
1163	input_from_file = .true.,.false.,.false.
1164	EOF
1165
1166	# Tested options for ideal case em_quarter_ss. Modifying these
1167	# parameters is acceptable. Adding to these requires changes
1168	# to the ideal namelist build below.
1169
1170	cat >! phys_quarter_ss_1a << EOF
1171	diff_opt = 1,
1172	km_opt = 1,
1173	damp_opt = 0,
1174	EOF
1175	cat >! phys_quarter_ss_1b << EOF
1176	mp_physics = 1, 1, 1,
1177	EOF
1178	cat >! phys_quarter_ss_1c << EOF
1179	moist_adv_opt = 1, 1, 1,
1180	scalar_adv_opt = 1, 1, 1,
1181	chem_adv_opt = 1, 1, 1,
1182	tke_adv_opt = 1, 1, 1,
1183	non_hydrostatic = .true., .true., .true.,
1184	EOF
1185	cat >! phys_quarter_ss_1d << EOF
1186	input_from_file = .true.,.false.,.false.
1187	EOF
1188	cat >! phys_quarter_ss_1e << EOF
1189	periodic_x = .false.,.false.,.false.,
1190	open_xs = .true., .false.,.false.,
1191	open_xe = .true., .false.,.false.,
1192	periodic_y = .false.,.false.,.false.,
1193	open_ys = .true., .false.,.false.,
1194	open_ye = .true., .false.,.false.,
1195	EOF
1196	cat >! phys_quarter_ss_1f << EOF
1197	sf_sfclay_physics = 0, 0, 0,
1198	EOF
1199
1200	cat >! phys_quarter_ss_2a << EOF
1201	diff_opt = 2,
1202	km_opt = 2,
1203	damp_opt = 1,
1204	EOF
1205	cat >! phys_quarter_ss_2b << EOF
1206	mp_physics = 1, 1, 1,
1207	EOF
1208	cat >! phys_quarter_ss_2c << EOF
1209	moist_adv_opt = 2, 2, 2,
1210	scalar_adv_opt = 2, 2, 2,
1211	chem_adv_opt = 2, 2, 2,
1212	tke_adv_opt = 2, 2, 2,
1213	non_hydrostatic = .true., .true., .true.,
1214	EOF
1215	cat >! phys_quarter_ss_2d << EOF
1216	input_from_file = .true.,.false.,.false.
1217	EOF
1218	cat >! phys_quarter_ss_2e << EOF
1219	periodic_x = .false.,.false.,.false.,
1220	open_xs = .true., .false.,.false.,
1221	open_xe = .true., .false.,.false.,
1222	periodic_y = .false.,.false.,.false.,
1223	open_ys = .true., .false.,.false.,
1224	open_ye = .true., .false.,.false.,
1225	EOF
1226	cat >! phys_quarter_ss_2f << EOF
1227	sf_sfclay_physics = 1, 1, 1,
1228	EOF
1229
1230	cat >! phys_quarter_ss_3a << EOF
1231	diff_opt = 2,
1232	km_opt = 3,
1233	damp_opt = 1,
1234	EOF
1235	cat >! phys_quarter_ss_3b << EOF
1236	mp_physics = 2, 2, 2,
1237	EOF
1238	cat >! phys_quarter_ss_3c << EOF
1239	moist_adv_opt = 1, 1, 1,
1240	scalar_adv_opt = 1, 1, 1,
1241	chem_adv_opt = 1, 1, 1,
1242	tke_adv_opt = 1, 1, 1,
1243	non_hydrostatic = .false., .false., .false.,
1244	EOF
1245	cat >! phys_quarter_ss_3d << EOF
1246	input_from_file = .true.,.false.,.false.
1247	EOF
1248	cat >! phys_quarter_ss_3e << EOF
1249	periodic_x = .true., .false.,.false.,
1250	open_xs = .false.,.false.,.false.,
1251	open_xe = .false.,.false.,.false.,
1252	periodic_y = .true., .false.,.false.,
1253	open_ys = .false.,.false.,.false.,
1254	open_ye = .false.,.false.,.false.,
1255	EOF
1256	cat >! phys_quarter_ss_3f << EOF
1257	sf_sfclay_physics = 1, 1, 1,
1258	EOF
1259
1260	if ( $IO_FORM_WHICH[$IO_FORM] == IO ) then
1261	cat >! io_format << EOF
1262	io_form_history = $IO_FORM
1263	io_form_restart = $IO_FORM
1264	io_form_input = $IO_FORM
1265	io_form_boundary = $IO_FORM
1266	EOF
1267	else if ( $IO_FORM_WHICH[$IO_FORM] == I ) then
1268	cat >! io_format << EOF
1269	io_form_history = 2
1270	io_form_restart = 2
1271	io_form_input = $IO_FORM
1272	io_form_boundary = $IO_FORM
1273	EOF
1274	else if ( $IO_FORM_WHICH[$IO_FORM] == O ) then
1275	cat >! io_format << EOF
1276	io_form_history = $IO_FORM
1277	io_form_restart = 2
1278	io_form_input = 2
1279	io_form_boundary = 2
1280	EOF
1281	endif
1282
1283
1284	if ( $dataset == jun01 ) then
1285	set filetag_real=2001-06-11_12:00:00
1286	else if ( $dataset == jan00 ) then
1287	set filetag_real=2000-01-24_12:00:00
1288	else if ( $dataset == chem ) then
1289	set filetag_real = ( 2006-04-06_00:00:00 2006-04-06_12:00:00 )
1290	else if ( $dataset == global ) then
1291	set filetag_real=2008-01-02_12:00:00
1292	endif
1293
1294	set filetag_ideal=0001-01-01_00:00:00
1295	#DAVE###################################################
1296	echo did phys, set date to $filetag_real
1297	banner 2
1298	#set ans = "$<"
1299	#DAVE###################################################
1300
1301	#####################################################################
1302
1303	# Set up info for particular architectures
1304
1305	set ARCH = ( `uname` )
1306
1307	set ZAP_SERIAL = FALSE
1308	set ZAP_OPENMP = FALSE
1309	set SERIALRUNCOMMAND =
1310	set OMPRUNCOMMAND =
1311	set MPIRUNCOMMANDPOST =
1312
1313	touch version_info
1314	if ( $ARCH[1] == AIX ) then
1315	set DEF_DIR = $home
1316	set TMPDIR = /ptmp/$user
1317	# keep stuff out of $HOME and /ptmp/$USER
1318	# this allows multiple regressions tests to run simultaneously
1319	# extend this to other machines later
1320	if ( ( `hostname \| cut -c 1-2` == bs ) && ( ! $?LOADL_JOB_NAME ) ) then
1321	echo "${0}: ERROR:: This batch script must be submitted via"
1322	echo "${0}: LoadLeveler on an AIX machine\!"
1323	exit
1324	else if ( `hostname \| cut -c 1-2` == bs ) then
1325	set job_id = `echo ${LOADL_JOB_NAME} \| cut -f2 -d'.'`
1326	set DEF_DIR = /ptmp/$user/wrf_regression.${job_id}
1327	set TMPDIR = $DEF_DIR
1328	if ( -d $DEF_DIR ) then
1329	echo "${0}: ERROR:: Directory ${DEF_DIR} exists, please remove it"
1330	exit ( 1 )
1331	else
1332	mkdir -p $DEF_DIR
1333	echo "See ${DEF_DIR}/wrftest.output and other files in ${DEF_DIR} for test results"
1334	endif
1335	set CUR_DIR = ${LOADL_STEP_INITDIR}
1336	else if ( ( `hostname \| cut -c 1-2` == bv ) \|\| ( `hostname \| cut -c 1-2` == be ) ) then
1337	set job_id = $LSB_JOBID
1338	set DEF_DIR = /ptmp/$user/wrf_regression.${job_id}
1339	set TMPDIR = $DEF_DIR
1340	if ( -d $DEF_DIR ) then
1341	echo "${0}: ERROR:: Directory ${DEF_DIR} exists, please remove it"
1342	exit ( 1 )
1343	else
1344	mkdir -p $DEF_DIR
1345	echo "See ${DEF_DIR}/wrftest.output and other files in ${DEF_DIR} for test results"
1346	endif
1347	else if ( ( ( `hostname \| cut -c 1-2` != be ) && ( `hostname \| cut -c 1-2` != bv ) ) && ( ! $?LOADL_JOB_NAME ) ) then
1348	echo "${0}: ERROR:: This batch script must be submitted via"
1349	echo "${0}: LoadLeveler on an AIX machine\!"
1350	exit
1351	else if ( ( `hostname \| cut -c 1-2` != be ) && ( `hostname \| cut -c 1-2` != bv ) ) then
1352	set job_id = `echo ${LOADL_JOB_NAME} \| cut -f2 -d'.'`
1353	set DEF_DIR = /ptmp/$user/wrf_regression.${job_id}
1354	set TMPDIR = $DEF_DIR
1355	if ( -d $DEF_DIR ) then
1356	echo "${0}: ERROR:: Directory ${DEF_DIR} exists, please remove it"
1357	exit ( 1 )
1358	else
1359	mkdir -p $DEF_DIR
1360	echo "See ${DEF_DIR}/wrftest.output and other files in ${DEF_DIR} for test results"
1361	endif
1362	set CUR_DIR = ${LOADL_STEP_INITDIR}
1363	endif
1364	if ( ! -d $TMPDIR ) mkdir $TMPDIR
1365	set MAIL = /usr/bin/mailx
1366	set COMPOPTS = ( 1 2 3 )
1367	set COMPOPTS_NO_NEST = 0
1368	set COMPOPTS_NEST_STATIC = 1
1369	set COMPOPTS_NEST_PRESCRIBED = 2
1370	if ( $HWRF == TRUE ) then
1371	set COMPOPTS = ( 1 2 3 )
1372	endif
1373	set Num_Procs = 4
1374	set OPENMP = $Num_Procs
1375	setenv MP_PROCS $Num_Procs
1376	setenv MP_RMPOOL 1
1377	if ( `hostname \| cut -c 1-2` == bs ) then
1378	set MPIRUNCOMMAND = poe
1379	else if ( `hostname \| cut -c 1-2` == bv ) then
1380	set MPIRUNCOMMAND = mpirun.lsf
1381	else if ( `hostname \| cut -c 1-2` == be ) then
1382	set MPIRUNCOMMAND = /contrib/mpiruns/be/mpirun.lsf
1383	else if ( ( `hostname \| cut -c 1-2` != bs ) && \
1384	( `hostname \| cut -c 1-2` != bv ) && ( `hostname \| cut -c 1-2` != be ) ) then
1385	set MPIRUNCOMMAND = poe
1386	endif
1387	if ( $CHEM == TRUE ) then
1388	set ZAP_OPENMP = TRUE
1389	else if ( $CHEM == FALSE ) then
1390	set ZAP_OPENMP = FALSE
1391	endif
1392	# check compiler version, JM
1393	lslpp -i \| grep xlf \| grep ' xlfcmp ' \| head -1
1394	set xlfvers=`lslpp -i \| grep xlf \| grep ' xlfcmp ' \| head -1 \| awk '{print $2}' \| sed 's/\...*$//'`
1395	if ( ( $xlfvers > 9 ) && ( $NESTED == TRUE ) ) then
1396	# set ZAP_OPENMP = TRUE
1397	endif
1398	# end of compiler check, JM
1399	echo "Compiler version info: " >! version_info
1400	echo "FORTRAN: " `lslpp -l \| grep xlfrte \| head -1 \| awk '{print $1 " " $2}'` >>! version_info
1401	echo " " >>! version_info
1402	echo "OS version info: " >>! version_info
1403	echo "AIX: " `lslpp -l \| grep bos.mp \| head -1 \| awk '{print $1 " " $2}'` >>! version_info
1404	echo " " >>! version_info
1405	setenv MP_SHARED_MEMORY yes
1406	else if ( $ARCH[1] == Darwin ) then
1407	if ( ( `hostname` == stink ) && ( -d /stink/gill/Regression_Tests ) ) then
1408	set DEF_DIR = /stink/gill/Regression_Tests/wrf_regression
1409	mkdir $DEF_DIR
1410	else
1411	echo "We at least need a directory from which to do stuff"
1412	exit ( 2 )
1413	endif
1414	set TMPDIR = .
1415	set MAIL = /usr/bin/mailx
1416	if ( $LINUX_COMP == PGI ) then
1417	set COMPOPTS = ( 1 2 3 )
1418	set ZAP_OPENMP = FALSE
1419	else if ( $LINUX_COMP == G95 ) then
1420	set COMPOPTS = ( 13 0 14 )
1421	set ZAP_OPENMP = TRUE
1422	endif
1423	set COMPOPTS_NO_NEST = 0
1424	set COMPOPTS_NEST_STATIC = 1
1425	set COMPOPTS_NEST_PRESCRIBED = 2
1426	set Num_Procs = 4
1427	set OPENMP = 2
1428	cat >! `pwd`/machfile << EOF
1429	`hostname`
1430	`hostname`
1431	`hostname`
1432	`hostname`
1433	EOF
1434	set Mach = `pwd`/machfile
1435	set SERIALRUNCOMMAND =
1436	set OMPRUNCOMMAND =
1437	echo "Compiler version info: " >! version_info
1438	if ( $LINUX_COMP == PGI ) then
1439	set MPIRUNCOMMAND = ( /usr/local/mpich2-1.0.6p1-pgi/bin/mpirun -np $Num_Procs )
1440	pgf90 -V \| head -2 \| tail -1 >>&! version_info
1441	else if ( $LINUX_COMP == G95 ) then
1442	set MPIRUNCOMMAND = ( /stink/gill/local/bin/mpirun -np $Num_Procs )
1443	g95 -v \|& grep gcc >>&! version_info
1444	endif
1445	echo " " >>! version_info
1446	echo "OS version info: " >>! version_info
1447	uname -a >>&! version_info
1448	echo " " >>! version_info
1449	ps -A \| grep mpd \| grep -v grep >& /dev/null
1450	set ok = $status
1451	if ( $ok != 0 ) then
1452	echo starting an mpd process
1453	mpd &
1454	endif
1455	else if ( $ARCH[1] == OSF1 && $clrm == 1 ) then
1456	set DEF_DIR = /`hostname \| cut -d. -f1`/$user
1457	set TMPDIR = /mmmtmp/$user
1458	set MAIL = /usr/bin/mailx
1459	if ( ( $NESTED == TRUE ) && ( $RSL_LITE != TRUE ) ) then
1460	set COMPOPTS = ( 2 4 6 )
1461	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE != TRUE ) ) then
1462	set COMPOPTS = ( 1 3 6 )
1463	else if ( ( $NESTED == TRUE ) && ( $RSL_LITE == TRUE ) ) then
1464	set COMPOPTS = ( 2 4 5 )
1465	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE == TRUE ) ) then
1466	set COMPOPTS = ( 1 3 5 )
1467	endif
1468	set Num_Procs = 4
1469	set OPENMP = 0
1470	set ZAP_OPENMP = TRUE
1471	cat >! $TMPDIR/machfile << EOF
1472	service03
1473	service04
1474	service05
1475	service06
1476	EOF
1477	set Mach = $TMPDIR/machfile
1478	set MPIRUNCOMMAND = ( mpirun -np $Num_Procs -machinefile $Mach )
1479	echo "Compiler version info: " >! version_info
1480	f90 -version >>&! version_info
1481	echo " " >>! version_info
1482	echo "OS version info: " >>! version_info
1483	uname -a >>&! version_info
1484	echo " " >>! version_info
1485	else if ( ( $ARCH[1] == Linux ) && ( `hostname` == bay-mmm ) ) then
1486	set DEF_DIR = /data3/mp/${user}/`hostname`
1487	if ( ! -d $DEF_DIR ) mkdir $DEF_DIR
1488	set TMPDIR = .
1489	set MAIL = /bin/mail
1490	if ( $LINUX_COMP == PGI ) then
1491	if ( ( $NESTED == TRUE ) && ( $RSL_LITE != TRUE ) ) then
1492	set COMPOPTS = ( 2 4 5 )
1493	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE != TRUE ) ) then
1494	set COMPOPTS = ( 1 3 5 )
1495	else if ( ( $NESTED == TRUE ) && ( $RSL_LITE == TRUE ) ) then
1496	set COMPOPTS = ( 2 4 6 )
1497	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE == TRUE ) ) then
1498	set COMPOPTS = ( 1 3 6 )
1499	endif
1500	else if ( $LINUX_COMP == INTEL ) then
1501	if ( $NESTED == TRUE ) then
1502	set COMPOPTS = ( 8 10 11 )
1503	else if ( $NESTED != TRUE ) then
1504	set COMPOPTS = ( 7 9 11 )
1505	endif
1506	endif
1507	set Num_Procs = 2
1508	set OPENMP = $Num_Procs
1509	cat >! machfile << EOF
1510	`hostname`
1511	`hostname`
1512	`hostname`
1513	`hostname`
1514	EOF
1515	set Mach = `pwd`/machfile
1516	if ( $CHEM == TRUE ) then
1517	set ZAP_OPENMP = TRUE
1518	else if ( $CHEM == FALSE ) then
1519	set ZAP_OPENMP = FALSE
1520	endif
1521	if ( $LINUX_COMP == INTEL ) then
1522	set ZAP_OPENMP = TRUE
1523	endif
1524	set MPIRUNCOMMAND = ( mpirun -np $Num_Procs -machinefile $Mach )
1525	echo "Compiler version info: " >! version_info
1526	if ( $LINUX_COMP == PGI ) then
1527	pgf90 -V >>&! version_info
1528	else if ( $LINUX_COMP == INTEL ) then
1529	ifort -v >>&! version_info
1530	endif
1531	echo " " >>! version_info
1532	echo "OS version info: " >>! version_info
1533	uname -a >>&! version_info
1534	echo " " >>! version_info
1535	else if ( ( $ARCH[1] == Linux ) && ( `hostname \| cut -c 1-2` == ln ) ) then
1536	set DEF_DIR = /ptmp/${user}/wrf_regtest
1537	if ( ! -d $DEF_DIR ) mkdir $DEF_DIR
1538	set TMPDIR = .
1539	set MAIL = /bin/mail
1540	if ( $LINUX_COMP == PGI ) then
1541	if ( ( $NESTED == TRUE ) && ( $RSL_LITE != TRUE ) ) then
1542	set COMPOPTS = ( 4 2 3 )
1543	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE != TRUE ) ) then
1544	set COMPOPTS = ( 1 2 3 )
1545	endif
1546	endif
1547	set Num_Procs = 4
1548	set OPENMP = 2
1549	cat >! machfile << EOF
1550	`hostname`
1551	`hostname`
1552	`hostname`
1553	`hostname`
1554	EOF
1555	set Mach = `pwd`/machfile
1556	set ZAP_OPENMP = TRUE
1557	set MPIRUNCOMMAND = mpirun.lsf
1558	echo "Compiler version info: " >! version_info
1559	if ( $LINUX_COMP == PGI ) then
1560	pgf90 -V >>&! version_info
1561	else if ( $LINUX_COMP == INTEL ) then
1562	ifort -v >>&! version_info
1563	endif
1564	echo " " >>! version_info
1565	echo "OS version info: " >>! version_info
1566	uname -a >>&! version_info
1567	echo " " >>! version_info
1568	else if ( ( $ARCH[1] == Linux ) && ( `hostname` == loquat ) ) then
1569	set job_id = $$
1570	set DEF_DIR = /loquat2/$user/wrf_regression.${job_id}
1571	set TMPDIR = $DEF_DIR
1572	if ( -d $DEF_DIR ) then
1573	echo "${0}: ERROR:: Directory ${DEF_DIR} exists, please remove it"
1574	exit ( 1 )
1575	else
1576	mkdir -p $DEF_DIR
1577	echo "See directory ${DEF_DIR}/ for wrftest.output and other test results"
1578	endif
1579	set MAIL = /bin/mail
1580	if ( $LINUX_COMP == PGI ) then
1581	if ( ( $NESTED == TRUE ) && ( $RSL_LITE != TRUE ) ) then
1582	set COMPOPTS = ( 2 4 5 )
1583	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE != TRUE ) ) then
1584	set COMPOPTS = ( 1 3 5 )
1585	else if ( ( $NESTED == TRUE ) && ( $RSL_LITE == TRUE ) ) then
1586	set COMPOPTS = ( 2 4 6 )
1587	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE == TRUE ) ) then
1588	set COMPOPTS = ( 1 3 6 )
1589	endif
1590	else if ( $LINUX_COMP == INTEL ) then
1591	if ( $NESTED == TRUE ) then
1592	set COMPOPTS = ( 8 10 11 )
1593	else if ( $NESTED != TRUE ) then
1594	set COMPOPTS = ( 7 9 11 )
1595	endif
1596	endif
1597	set Num_Procs = 2
1598	set OPENMP = $Num_Procs
1599	cat >! machfile << EOF
1600	`hostname`
1601	`hostname`
1602	`hostname`
1603	`hostname`
1604	EOF
1605	set Mach = `pwd`/machfile
1606	if ( $CHEM == TRUE ) then
1607	set ZAP_OPENMP = TRUE
1608	else if ( $CHEM == FALSE ) then
1609	set ZAP_OPENMP = FALSE
1610	endif
1611	if ( $LINUX_COMP == INTEL ) then
1612	set ZAP_OPENMP = TRUE
1613	endif
1614	set MPIRUNCOMMAND = ( mpirun -np $Num_Procs -machinefile $Mach )
1615	echo "Compiler version info: " >! version_info
1616	if ( $LINUX_COMP == PGI ) then
1617	pgf90 -V >>&! version_info
1618	else if ( $LINUX_COMP == INTEL ) then
1619	ifort -v >>&! version_info
1620	endif
1621	echo " " >>! version_info
1622	echo "OS version info: " >>! version_info
1623	uname -a >>&! version_info
1624	echo " " >>! version_info
1625	else if ( `hostname` == tempest ) then
1626	set DEF_DIR = /ptmp/${user}/wrf_regtest.${QSUB_REQID}
1627	if ( ! -d $DEF_DIR ) mkdir $DEF_DIR
1628	set TMPDIR = .
1629	set MAIL = /usr/sbin/Mail
1630	set COMPOPTS = ( 1 2 3 )
1631	set Num_Procs = 2
1632	set OPENMP = $Num_Procs
1633	set Mach = `pwd`/machfile
1634	set ZAP_OPENMP = TRUE
1635	set MPIRUNCOMMAND = ( mpirun -np $Num_Procs )
1636	echo "Compiler version info: " >! version_info
1637	f90 -version >>&! version_info
1638	echo " " >>! version_info
1639	echo "OS version info: " >>! version_info
1640	uname -a >>&! version_info
1641	echo " " >>! version_info
1642	else if ( ( $ARCH[1] == Linux ) && ( `hostname` == master ) ) then
1643	set DEF_DIR = /big6/gill/DO_NOT_REMOVE_DIR
1644	set TMPDIR = .
1645	set MAIL = /bin/mail
1646	if ( $LINUX_COMP == PGI ) then
1647	if ( $NESTED == TRUE ) then
1648	set COMPOPTS = ( 2 4 5 )
1649	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE == TRUE ) ) then
1650	set COMPOPTS = ( 1 3 6 )
1651	else if ( ( $NESTED != TRUE ) && ( $RSL_LITE != TRUE ) ) then
1652	set COMPOPTS = ( 1 3 5 )
1653	endif
1654	else if ( $LINUX_COMP == INTEL ) then
1655	if ( $NESTED == TRUE ) then
1656	set COMPOPTS = ( 8 10 11 )
1657	else if ( $NESTED != TRUE ) then
1658	set COMPOPTS = ( 7 9 11 )
1659	endif
1660	endif
1661	set Num_Procs = 4
1662	set OPENMP = 2
1663	cat >! machfile << EOF
1664	node3
1665	node3
1666	node4
1667	node4
1668	EOF
1669	set Mach = `pwd`/machfile
1670	if ( $CHEM == TRUE ) then
1671	set ZAP_OPENMP = TRUE
1672	else if ( $CHEM == FALSE ) then
1673	set ZAP_OPENMP = FALSE
1674	endif
1675	if ( $LINUX_COMP == INTEL ) then
1676	set ZAP_OPENMP = TRUE
1677	endif
1678	set MPIRUNCOMMAND = ( mpirun -v -np $Num_Procs -machinefile $Mach -nolocal )
1679	set MPIRUNCOMMANDPOST = "< /dev/null"
1680	echo "Compiler version info: " >! version_info
1681	if ( $LINUX_COMP == PGI ) then
1682	pgf90 -V >>&! version_info
1683	else if ( $LINUX_COMP == INTEL ) then
1684	ifort -v >>&! version_info
1685	endif
1686	echo " " >>! version_info
1687	echo "OS version info: " >>! version_info
1688	uname -a >>&! version_info
1689	echo " " >>! version_info
1690	else
1691	echo "Unrecognized architecture for regression test" >! error_message
1692	echo `uname` >> error_message
1693	echo `hostname` >> error_message
1694	$MAIL -s "Unknown architecture $ARCH[1] " $FAIL_MAIL < error_message
1695	exit ( 1 )
1696	endif
1697
1698	#####################################################################
1699	#DAVE###################################################
1700	echo did the arch specific stuff
1701	banner 3
1702	#set ans = "$<"
1703	#DAVE###################################################
1704
1705	if ( $FDDA == TRUE ) then
1706	if ( ( $PHYSOPTS_FDDA == GRID ) && ( $ZAP_OPENMP == FALSE ) ) then
1707	set ZAP_OPENMP = FALSE
1708	else if ( $PHYSOPTS_FDDA == BOTH ) then
1709	set ZAP_OPENMP = TRUE
1710	endif
1711	endif
1712
1713	# First of all, in which particular directory do we start.
1714
1715	cd $DEF_DIR
1716
1717	# We want to keep the old regression stuff around
1718
1719	if ( -d regression_test ) then
1720	if ( -d regression_test.old ) then
1721	/bin/rm -fr regression_test.old
1722	endif
1723	/bin/mv regression_test regression_test.old
1724	endif
1725
1726	# Go to the regression test directory
1727
1728	mkdir regression_test
1729	set ok = $status
1730	if ( $ok != 0 ) then
1731	echo "Gee, I cannot make a directory in $DEF_DIR" >! error_message
1732	echo `pwd` >> error_message
1733	echo `\ls -ls` >> error_message
1734	$MAIL -s "$DEF_DIR not writable $ARCH[1] " $FAIL_MAIL < error_message
1735	exit ( 1 )
1736	else
1737	pushd regression_test
1738	endif
1739
1740	if ( $acquire_from == "cvs" ) then
1741
1742	# Checkout the most recent version of WRF from the NCAR cvs repository,
1743	# and pick up the required input data from the anonymous ftp site.
1744
1745	cvs checkout -D $thedate WRFV3
1746	find ./WRFV3 -exec touch \{\} \;
1747	ftp -n ftp.ucar.edu < ftp_script_data
1748
1749
1750	else if ( $acquire_from == "filearg" ) then
1751
1752	# A tar file of the WRF source was provided, so that is used, along with
1753	# the required input data files from the ftp site.
1754
1755	tar xvf $thefile
1756	cd WRFV3
1757	clean -a
1758	cd ..
1759	ftp -n ftp.ucar.edu < ftp_script_data
1760
1761	else if ( $acquire_from == "environment" ) then
1762
1763	# A tar file of WRF is assumed to be available.
1764
1765	tar xvf $thefile
1766
1767	endif
1768
1769	# And we can stick the input data where we want, the WRFV3 directory has been created.
1770
1771	( cd WRFV3/test/em_real ; ln -sf $thedataem/* . )
1772	#( cd WRFV3/test/nmm_real ; ln -s $thedatanmm/wrf_real* . ; cp $thedatanmm/namelist.input.regtest . )
1773	( cd WRFV3/test/nmm_real ; ln -s $thedatanmm/wrf_real* . ; ln -s $thedatanmm/wrf_nest* . ; ln -s $thedatanmm/geo_* .; \
1774	cp $thedatanmm/namelist.nest.regtest . ; ln -s $thedatanmm/met_nmm* . ; \
1775	sed '/dyn_opt/d' $thedatanmm/namelist.input.regtest >! ./namelist.input.regtest )
1776
1777	( cd WRFV3/test/nmm_real ; ln -s $thedatanmm/wrfinput_hwrf* . ; ln -s $thedatanmm/nest1* . ; \
1778	ln -s $thedatanmm/wrfbdy_hwrf* . ; cp $thedatanmm/namelist.input.hwrf . ; )
1779
1780	#DAVE###################################################
1781	( cd WRFV3/test/em_real ; ls -ls )
1782	( cd WRFV3/test/nmm_real ; ls -ls )
1783	banner 4
1784	#set ans = "$<"
1785	#DAVE###################################################
1786
1787	# John-specific stuff for maple is the else; part of the "using service machines".
1788
1789	if ( ! $clrm ) then
1790	pushd WRFV3
1791	else
1792	if ( ! -d $TMPDIR ) then
1793	echo something wrong 1
1794	endif
1795	if ( ! -d $TMPDIR/RUN ) then
1796	mkdir $TMPDIR/RUN
1797	/bin/rm -fr $TMPDIR/RUN/*
1798	endif
1799	if ( -d $TMPDIR/RUN ) then
1800	tar cf - ./WRFV3/test ./WRFV3/main \| ( cd $TMPDIR/RUN ; tar xvf - )
1801	pushd WRFV3
1802	else
1803	echo something wrong 2
1804	exit
1805	endif
1806	endif
1807
1808	# Here we initialize our output message.
1809
1810	if ( -e ${DEF_DIR}/wrftest.output ) rm ${DEF_DIR}/wrftest.output
1811	echo "Architecture $ARCH[1] machine: `hostname`" >>! ${DEF_DIR}/wrftest.output
1812	echo "WRFV3 source from: $acquire_from " >>! ${DEF_DIR}/wrftest.output
1813	echo "Number of OpenMP processes to use: $OPENMP" >>! ${DEF_DIR}/wrftest.output
1814	echo "Number of MPI processes to use: $Num_Procs" >>! ${DEF_DIR}/wrftest.output
1815	if ( $ARCH[1] == Darwin ) then
1816	set name = `finger $user \| grep "Name:" \| awk '{print $4 " " $5}'`
1817	else
1818	set name = ( `grep ^${user}: /etc/passwd \| cut -d: -f5` )
1819	endif
1820	echo "Test conducted by $name" >>! ${DEF_DIR}/wrftest.output
1821	echo " " >>! ${DEF_DIR}/wrftest.output
1822	echo "Test run from directory ${CUR_DIR}" >>! ${DEF_DIR}/wrftest.output
1823	echo " " >>! ${DEF_DIR}/wrftest.output
1824	if ( $?LOADL_JOB_NAME ) then
1825	echo "Loadlever job name = ${LOADL_JOB_NAME}" >>! ${DEF_DIR}/wrftest.output
1826	echo " " >>! ${DEF_DIR}/wrftest.output
1827	endif
1828	echo "Real data case for EM is from $dataset " >>! ${DEF_DIR}/wrftest.output
1829	echo " " >>! ${DEF_DIR}/wrftest.output
1830	echo "The em real and ideal forecasts will be nested: $NESTED " >>! ${DEF_DIR}/wrftest.output
1831	echo " " >>! ${DEF_DIR}/wrftest.output
1832	if ( $REG_TYPE == BIT4BIT ) then
1833	echo "This is a bit-wise (traditional) regression test. " >>! ${DEF_DIR}/wrftest.output
1834	echo " " >>! ${DEF_DIR}/wrftest.output
1835	else if ( $REG_TYPE == OPTIMIZED ) then
1836	echo "This is a fully optimized regression test. " >>! ${DEF_DIR}/wrftest.output
1837	echo "No inter-comparisons are made. " >>! ${DEF_DIR}/wrftest.output
1838	echo " " >>! ${DEF_DIR}/wrftest.output
1839	endif
1840	if ( $REAL8 == TRUE ) then
1841	echo "Floating point precision is 8-bytes" >>! ${DEF_DIR}/wrftest.output
1842	echo " " >>! ${DEF_DIR}/wrftest.output
1843	endif
1844	if ( ( $CHEM == TRUE ) && ( $KPP != TRUE ) ) then
1845	echo "WRF_CHEM tests run for em_real core only" >>! ${DEF_DIR}/wrftest.output
1846	echo " " >>! ${DEF_DIR}/wrftest.output
1847	else if ( ( $CHEM == TRUE ) && ( $KPP == TRUE ) ) then
1848	echo "WRF_CHEM KPP tests run for em_real core only" >>! ${DEF_DIR}/wrftest.output
1849	echo " " >>! ${DEF_DIR}/wrftest.output
1850	endif
1851	if ( $ADAPTIVE == TRUE ) then
1852	echo "Adaptive time step for em_real core only" >>! ${DEF_DIR}/wrftest.output
1853	echo " " >>! ${DEF_DIR}/wrftest.output
1854	endif
1855	if ( $GLOBAL == TRUE ) then
1856	echo "Global tests run for em_real core only" >>! ${DEF_DIR}/wrftest.output
1857	echo " " >>! ${DEF_DIR}/wrftest.output
1858	endif
1859	if ( $ESMF_LIB == TRUE ) then
1860	echo "A separately installed version of the latest ESMF library" >>! ${DEF_DIR}/wrftest.output
1861	echo "(NOT the ESMF library included in the WRF tarfile) will" >>! ${DEF_DIR}/wrftest.output
1862	echo "be used for MPI tests" >>! ${DEF_DIR}/wrftest.output
1863	echo " " >>! ${DEF_DIR}/wrftest.output
1864	endif
1865	if ( $QUILT == TRUE ) then
1866	echo "One WRF output quilt server will be used for some tests" >>! ${DEF_DIR}/wrftest.output
1867	echo " " >>! ${DEF_DIR}/wrftest.output
1868	endif
1869	if ( $FDDA == TRUE ) then
1870	if ( $PHYSOPTS_FDDA == GRID ) then
1871	echo "Running FDDA tests (grid nudging only)" >>! ${DEF_DIR}/wrftest.output
1872	echo " " >>! ${DEF_DIR}/wrftest.output
1873	else if ( $PHYSOPTS_FDDA == BOTH ) then
1874	echo "Running FDDA tests (grid=1, obs=2, grid+obs=3)" >>! ${DEF_DIR}/wrftest.output
1875	echo " " >>! ${DEF_DIR}/wrftest.output
1876	endif
1877	endif
1878	if ( $HWRF == TRUE ) then
1879	echo "Running HWRF specific NMM-core only" >>! ${DEF_DIR}/wrftest.output
1880	echo " " >>! ${DEF_DIR}/wrftest.output
1881	endif
1882	if ( $GENERATE_BASELINE != FALSE ) then
1883	echo "WRF output will be archived in baseline directory ${GENERATE_BASELINE} for some tests" >>! \
1884	${DEF_DIR}/wrftest.output
1885	echo " " >>! ${DEF_DIR}/wrftest.output
1886	endif
1887	if ( $COMPARE_BASELINE != FALSE ) then
1888	echo "WRF output will be compared with files in baseline directory ${COMPARE_BASELINE} for some tests" >>! \
1889	${DEF_DIR}/wrftest.output
1890	echo " " >>! ${DEF_DIR}/wrftest.output
1891	endif
1892	echo "The selected I/O option is $IO_FORM ($IO_FORM_NAME[$IO_FORM])" >>! ${DEF_DIR}/wrftest.output
1893	if ( $IO_FORM_WHICH[$IO_FORM] == IO ) then
1894	echo "This option is for both input and history files" >>! ${DEF_DIR}/wrftest.output
1895	echo " " >>! ${DEF_DIR}/wrftest.output
1896	else if ( $IO_FORM_WHICH[$IO_FORM] == I ) then
1897	echo "This option is for input files only" >>! ${DEF_DIR}/wrftest.output
1898	echo " " >>! ${DEF_DIR}/wrftest.output
1899	else if ( $IO_FORM_WHICH[$IO_FORM] == O ) then
1900	echo "This option is for history files only" >>! ${DEF_DIR}/wrftest.output
1901	echo " " >>! ${DEF_DIR}/wrftest.output
1902	endif
1903
1904	cat ${CUR_DIR}/version_info >>! ${DEF_DIR}/wrftest.output
1905
1906	# There are three WRF em executables to be considered that can run in threaded and
1907	# distributed memory. The 2d hills and 2d squall lines cannot be parallelized with
1908	# MPI, and are therefore not considered in this shell. The nmm is only run with
1909	# distributed memory (1 vs 4 procs).
1910
1911	set first_time_in = TRUE
1912	foreach core ( $CORES )
1913	#DAVE###################################################
1914	echo doing core $core
1915	banner 5
1916	#set ans = "$<"
1917	#DAVE###################################################
1918
1919	# Some sleight of hand is required for the chemistry tests because we need to
1920	# build it twice. But normally, we only build with different real vs ideal, or em vs nmm.
1921	# What to do, what to do? Well, we ask for em_real TWICE. The first time we build without chemistry
1922	# activated, the second time with it activated. The first time, we do a single
1923	# test, the second time through, we do the other 5 tests.
1924
1925	if ( ( $CHEM == TRUE ) && ( ${#CORES} == 2 ) && ( $first_time_in == TRUE ) ) then
1926	setenv WRF_CHEM 0
1927	set PHYSOPTS = ( 1 )
1928	set first_time_in = FALSE
1929	else if ( ( $CHEM == TRUE ) && ( $KPP != TRUE ) && ( ${#CORES} == 2 ) && ( $first_time_in != TRUE ) ) then
1930	setenv WRF_CHEM 1
1931	set PHYSOPTS = ( 2 3 4 5 6 )
1932	else if ( ( $CHEM == TRUE ) && ( $KPP == TRUE ) && ( ${#CORES} == 2 ) && ( $first_time_in != TRUE ) ) then
1933	setenv WRF_CHEM 1
1934	set PHYSOPTS = ( 2 3 )
1935	endif
1936
1937	# Cores to test.
1938
1939	set ZAP_SERIAL_FOR_THIS_CORE = FALSE
1940	set ZAP_OPENMP_FOR_THIS_CORE = FALSE
1941	if ( `echo $core \| cut -c 1-2` == em ) then
1942	setenv WRF_EM_CORE 1
1943	setenv WRF_NMM_CORE 0
1944	setenv WRF_COAMPS_CORE 0
1945	setenv WRF_EXP_CORE 0
1946	set ZAP_SERIAL_FOR_THIS_CORE = FALSE
1947	set ZAP_OPENMP_FOR_THIS_CORE = FALSE
1948	else if ( `echo $core \| cut -c 1-3` == nmm ) then
1949	setenv WRF_EM_CORE 0
1950	setenv WRF_NMM_CORE 1
1951	setenv WRF_NMM_NEST 1
1952	setenv WRF_COAMPS_CORE 0
1953	setenv WRF_EXP_CORE 0
1954	set ZAP_SERIAL_FOR_THIS_CORE = TRUE
1955	set ZAP_OPENMP_FOR_THIS_CORE = TRUE
1956	if ( ($HWRF == TRUE ) ) then
1957	setenv HWRF 1
1958	endif
1959	endif
1960
1961	# Here we are looping over all of the various compilation configurations,
1962	# such as serial only, OpenMP only, MPI only, etc. Each architecture
1963	# has its own list of these options. We build each of the executables for
1964	# this particular ${core}.
1965
1966	foreach compopt ( $COMPOPTS )
1967	#DAVE###################################################
1968	echo doing compile option $compopt
1969	banner 6
1970	#set ans = "$<"
1971	#DAVE###################################################
1972
1973	# We sometimes are interested in bypassing the OpenMP option.
1974
1975	if ( $compopt == $COMPOPTS[2] ) then
1976	if ( $ZAP_OPENMP == TRUE \|\| $ZAP_OPENMP_FOR_THIS_CORE == TRUE ) then
1977	goto GOT_THIS_EXEC
1978	endif
1979	endif
1980
1981	# NMM only runs parallel
1982	if ( $compopt == $COMPOPTS[1] ) then
1983	if ( $ZAP_SERIAL == TRUE \|\| $ZAP_SERIAL_FOR_THIS_CORE == TRUE ) then
1984	goto GOT_THIS_EXEC
1985	endif
1986	endif
1987
1988	if ( `uname` == AIX ) goto BUILD_REGARDLESS
1989
1990	# Did we already build this one?
1991
1992	if ( $core == em_real ) then
1993	if ( ( $compopt == $COMPOPTS[1] ) && \
1994	( -e main/wrf_${core}.exe.$compopt ) && \
1995	( -e main/real_${core}.exe.1 ) && \
1996	( -e ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf ) ) then
1997	goto GOT_THIS_EXEC
1998	else if ( ( $compopt != $COMPOPTS[1] ) && \
1999	( -e main/wrf_${core}.exe.$compopt ) && \
2000	( -e ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf ) ) then
2001	goto GOT_THIS_EXEC
2002	endif
2003	else
2004	if ( ( $compopt == $COMPOPTS[1] ) && \
2005	( -e main/wrf_${core}.exe.$compopt ) && \
2006	( -e main/ideal_${core}.exe.1 ) && \
2007	( -e ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf ) ) then
2008	goto GOT_THIS_EXEC
2009	else if ( ( $compopt != $COMPOPTS[1] ) && \
2010	( -e main/wrf_${core}.exe.$compopt ) && \
2011	( -e ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf ) ) then
2012	goto GOT_THIS_EXEC
2013	endif
2014	endif
2015
2016	BUILD_REGARDLESS:
2017
2018	# The WRF configuration file works with a single integer
2019	# input, which is the compiler option. By convention, option $COMPOPTS[1] is
2020	# serial, $COMPOPTS[2] is OMP, and $COMPOPTS[3] is MPI.
2021
2022	# Print info about use of separately installed ESMF library.
2023	set esmf_lib_str = " - - - - - - - - - - - - - "
2024	if ( $ESMF_LIB == TRUE ) then
2025	# only test ESMF with MPI
2026	if ( $compopt == $COMPOPTS[3] ) then
2027	echo "A separately installed version of the latest ESMF library" >>! ${DEF_DIR}/wrftest.output
2028	echo "(NOT the ESMF library included in the WRF tarfile) is" >>! ${DEF_DIR}/wrftest.output
2029	echo "being used for this test of $core parallel $compopt..." >>! ${DEF_DIR}/wrftest.output
2030	set esmf_lib_str = "using separate ESMF library"
2031	echo "Setting ESMFLIB = ${ESMFLIBSAVE}" >>! ${DEF_DIR}/wrftest.output
2032	echo "Setting ESMFINC = ${ESMFINCSAVE}" >>! ${DEF_DIR}/wrftest.output
2033	setenv ESMFLIB $ESMFLIBSAVE
2034	setenv ESMFINC $ESMFINCSAVE
2035	else
2036	unsetenv ESMFLIB
2037	unsetenv ESMFINC
2038	endif
2039	endif
2040
2041	#DAVE###################################################
2042	echo start build mechanism
2043	banner 7
2044	#set ans = "$<"
2045	#DAVE###################################################
2046	./clean -a
2047
2048	# Edit build command for either bit-wise comparison or full optimization.
2049
2050	if ( $REG_TYPE == BIT4BIT ) then
2051	set DEBUG_FLAG = -d
2052	else
2053	set DEBUG_FLAG =
2054	endif
2055
2056	# Edit build command. If this is a nested run, then either static nest
2057	# (idealized) or prescribed move (em_real). If not nested, then shut off
2058	# the nesting build option.
2059
2060	if ( $NESTED == TRUE ) then
2061	if ( $core == em_real ) then
2062	set compopts_nest = $COMPOPTS_NEST_PRESCRIBED
2063	else
2064	set compopts_nest = $COMPOPTS_NEST_STATIC
2065	endif
2066	else
2067	set compopts_nest = $COMPOPTS_NO_NEST
2068	endif
2069
2070	./configure $DEBUG_FLAG << EOF
2071	$compopt
2072	$compopts_nest
2073	EOF
2074	cp configure.wrf configure.wrf.core=${core}_build=${compopt}
2075
2076	# The configure.wrf file needs to be adjusted as to whether we are requesting real4 or real8
2077	# as the default floating precision.
2078
2079	if ( $REAL8 == TRUE ) then
2080	sed -e '/^RWORDSIZE/s/\$(NATIVE_RWORDSIZE)/8/' configure.wrf > ! foo ; /bin/mv foo configure.wrf
2081	endif
2082
2083	# Fix the OpenMP default for IBM regression testing - noopt required for bit-wise comparison.
2084
2085	if ( ( $compopt == $COMPOPTS[2] ) && ( `uname` == AIX ) ) then
2086	sed -e '/^OMP/s/-qsmp=noauto/-qsmp=noauto:noopt/' configure.wrf > ! foo ; /bin/mv foo configure.wrf
2087	endif
2088
2089	# Save the configure file.
2090
2091	cp configure.wrf configure.wrf.core=${core}_build=${compopt}
2092
2093	#DAVE###################################################
2094	echo configure built with optim mods removed, ready to compile
2095	banner 8
2096	#set ans = "$<"
2097	#DAVE###################################################
2098
2099	# The WRF_SRC_ROOT_DIR hack is only used by the OSF1 build.
2100	# It works around the annoying fact that in OSF1 $(PWD) does
2101	# not change during execution of regtest.csh, despite the "cd"
2102	# and "pushd" commands.
2103	setenv WRF_SRC_ROOT_DIR "${DEF_DIR}/regression_test/WRFV3"
2104	# Build this executable
2105
2106	./compile $core >&! compile_${core}_build=${compopt}.log
2107	#DAVE###################################################
2108	echo compile done
2109	banner 9
2110	#set ans = "$<"
2111	#DAVE###################################################
2112
2113	# Did the compile work? Check the expected executable names and locations.
2114
2115	set ok = $status
2116	if ( ! -x main/wrf.exe ) set ok = 1
2117
2118	if ( ( $core == em_real ) && ( $compopt == $COMPOPTS[1] ) ) then
2119	if ( ! -e main/real.exe ) set ok = 1
2120	else if ( ( $core == nmm_real ) && ( $compopt == $COMPOPTS[3] ) ) then
2121	if ( ! -e main/real_nmm.exe ) set ok = 1
2122	else if ( $compopt == $COMPOPTS[1] ) then
2123	if ( ! -e main/ideal.exe ) set ok = 1
2124	endif
2125
2126	if ( ! -x external/io_netcdf/diffwrf ) set ok = 1
2127	# if ( ! -x external/io_int/diffwrf ) set ok = 1
2128
2129	if ( $ok != 0 ) then
2130	echo "SUMMARY compilation for $core parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2131	$MAIL -s "REGRESSION FAILURE $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2132	exit ( 3 )
2133	else
2134	echo "SUMMARY compilation for $core parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2135	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2136	mv main/wrf.exe main/wrf_${core}.exe.$compopt
2137	if ( ( $core == em_real ) && ( $compopt == $COMPOPTS[1] ) ) then
2138	mv main/real.exe main/real_${core}.exe.1
2139	else if ( ( $core == nmm_real ) && ( $compopt == $COMPOPTS[3] ) ) then
2140	mv main/real_nmm.exe main/real_${core}.exe.$COMPOPTS[3]
2141	else if ( $compopt == $COMPOPTS[1] ) then
2142	mv main/ideal.exe main/ideal_${core}.exe.1
2143	endif
2144	#DAVE###################################################
2145	echo exec exists
2146	ls -ls main/.exe
2147	banner 10
2148	#set ans = "$<"
2149	#DAVE###################################################
2150	endif
2151
2152	GOT_THIS_EXEC:
2153
2154	if ( $clrm ) then
2155	cp main/exe $TMPDIR/RUN/WRFV3/main
2156	endif
2157
2158	end
2159
2160	if ( $clrm ) then
2161	pushd $TMPDIR/RUN/WRFV3
2162	endif
2163
2164	# We have all of the executables built, now we run'em. This is a loop
2165	# over all of the various physics options for this particular
2166	# ${core}. Inside the physics loop, we loop over the parallel options.
2167	# This allows us to use the same WRF input files for each of the parallel
2168	# choices for a single physics loop index.
2169
2170	foreach phys_option ( $PHYSOPTS )
2171	#DAVE###################################################
2172	echo which phys option $phys_option
2173	banner 11
2174	#set ans = "$<"
2175	#DAVE###################################################
2176
2177	# For each of the executables, we need to run several physics
2178	# options.
2179
2180	if ( $core == em_real ) then
2181
2182	if ( $CHEM != TRUE ) then
2183	set filetag=$filetag_real
2184	else if ( $CHEM == TRUE ) then
2185	if ( $phys_option <= 3 ) then
2186	set filetag=$filetag_real[1]
2187	else
2188	set filetag=$filetag_real[2]
2189	endif
2190	endif
2191
2192	foreach compopt ( $COMPOPTS )
2193	#DAVE###################################################
2194	echo real if filetag is $filetag
2195	echo compopt = $compopt
2196	banner 12
2197	#set ans = "$<"
2198	#DAVE###################################################
2199
2200	# We sometimes are interested in bypassing the OpenMP option.
2201
2202	if ( $compopt == $COMPOPTS[2] ) then
2203	if ( $ZAP_OPENMP == TRUE \|\| $ZAP_OPENMP_FOR_THIS_CORE == TRUE ) then
2204	goto BYPASS_COMP_LOOP_REAL
2205	endif
2206	endif
2207
2208	if ( $compopt == $COMPOPTS[1] ) then
2209	if ( $ZAP_SERIAL == TRUE \|\| $ZAP_SERIAL_FOR_THIS_CORE == TRUE ) then
2210	goto BYPASS_COMP_LOOP_REAL
2211	endif
2212	endif
2213
2214	pushd test/$core
2215
2216	#
2217	# Create the correct namelist.input file for real data cases.
2218	#
2219
2220	if ( $CHEM != TRUE ) then
2221	cp ${CUR_DIR}/phys_real_${phys_option} phys_opt
2222	if ( $NESTED != TRUE ) then
2223	cp ${CUR_DIR}/dyn_real_${phys_option} dyn_opt
2224	else
2225	cp ${CUR_DIR}/dyn_real_SAFE dyn_opt
2226	endif
2227	cp ${CUR_DIR}/time_real_${phys_option} time_opt
2228	cp ${CUR_DIR}/dom_real dom_real
2229	cp ${CUR_DIR}/nest_real_${phys_option} nest_input_opt
2230	cp ${CUR_DIR}/damp_real_${phys_option} damp_real
2231	if ( -e fdda_opt ) rm fdda_opt
2232	cat " grid_fdda=0" > fdda_opt
2233	if ( -e fdda_time ) rm fdda_time
2234
2235	if ( $FDDA == TRUE ) then
2236	cp ${CUR_DIR}/fdda_real_${phys_option} fdda_opt
2237	cp ${CUR_DIR}/fdda_real_time_${phys_option} fdda_time
2238	endif
2239
2240	set time_step = `awk ' /^ time_step /{ print $3 } ' namelist.input.$dataset \| cut -d, -f1`
2241
2242	# Wanna do more/less time steps on the real cases? Easy. Those last two numbers
2243	# in the eqns are all you need. Their product must be 60. So, instead of 3 and 20,
2244	# (3 coarse grid timesteps), you could use 20 and 3 (20 coarse grid time steps).
2245
2246	if ( $NESTED == TRUE ) then
2247	@ run_seconds = $time_step * 3
2248	@ history_interval = $time_step / 20
2249	else if ( $NESTED != TRUE ) then
2250	@ run_seconds = $time_step * 10
2251	@ history_interval = $time_step / 6
2252	endif
2253	rm ed_in namelist.input.temp
2254	cat >! ed_in << EOF
2255	g/run_seconds/s/[0-9]/$run_seconds
2256	g/history_interval/s/[0-9][0-9][0-9]/$history_interval
2257	w namelist.input.temp
2258	q
2259	EOF
2260	ed namelist.input.$dataset < ed_in
2261
2262	cp ${CUR_DIR}/io_format io_format
2263	sed -e '/^ mp_physics/,/ensdim/d' -e '/^ &physics/r ./phys_opt' \
2264	-e '/^ moist_adv_opt/,/scalar_adv_opt/d' -e '/^ non_hydrostatic/r ./dyn_opt' \
2265	-e '/^ auxinput1_inname/d' -e '/^ debug_level/r ./time_opt' \
2266	-e '/^ input_from_file/d' -e '/^ interval_seconds/r ./nest_input_opt' \
2267	-e '/^ time_step /,/^ smooth_option/d' -e '/^ &domains/r ./dom_real' \
2268	-e '/^ damp_opt /,/^ dampcoef/d' -e '/^ base_temp/r ./damp_real' \
2269	-e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
2270	-e 's/ frames_per_outfile = [0-9][0-9]/ frames_per_outfile = 200/g' \
2271	-e 's/ run_days = [0-9][0-9]/ run_days = 0/g' \
2272	-e 's/ run_hours = [0-9][0-9]/ run_hours = 0/g' \
2273	-e 's/ run_minutes = [0-9][0-9]/ run_minutes = 0/g' \
2274	-e '/^ &fdda/r fdda_opt' \
2275	-e '/^ debug_level/r fdda_time' \
2276	-e '/dyn_opt/d' \
2277	namelist.input.temp >! namelist.input
2278
2279	# The chem run has its own namelist, due to special input files (io_form not tested for chem)
2280
2281	else if ( $CHEM == TRUE ) then
2282	if ( ( $KPP == TRUE ) && ( $phys_option >= 3 ) ) then
2283	sed -e '/dyn_opt/d' \
2284	-e 's/^ chem_opt *= [0-9]/ chem_opt = '${CHEM_OPT}'/' \
2285	namelist.input.chem_test_${phys_option} >! namelist.input
2286	else
2287	sed -e '/dyn_opt/d' \
2288	namelist.input.chem_test_${phys_option} >! namelist.input
2289	endif
2290
2291	if ( -e met_em.d01.${filetag} ) then
2292	\rm met_em.d01.*
2293	endif
2294	if ( ${phys_option} <= 3 ) then
2295	ln -s 00z/met_em* .
2296	else
2297	ln -s 12z/met_em* .
2298	endif
2299
2300	endif
2301
2302	# WRF output quilt servers are only tested for MPI configuration.
2303	# Currently, only one WRF output quilt server is used.
2304
2305	if ( $QUILT == TRUE ) then
2306	if ( $compopt == $COMPOPTS[3] ) then
2307	# For now, test only one group of one output quilt servers.
2308	sed -e 's/ nio_tasks_per_group = [0-9][0-9]*/ nio_tasks_per_group = 1/g' \
2309	-e 's/ nio_groups = [0-9][0-9]*/ nio_groups = 1/g' \
2310	namelist.input >! namelist.input.temp
2311	mv -f namelist.input.temp namelist.input
2312	echo "Building namelist.input.$core.${phys_option}.$compopt with one I/O quilt server enabled."
2313	echo "NOTE one I/O quilt server enabled for $core physics $phys_option parallel $compopt..." >>! ${DEF_DIR}/wrftest.output
2314	endif
2315	endif
2316
2317	/bin/cp namelist.input $TMPDIR/namelist.input.$core.${phys_option}.$compopt
2318	#DAVE###################################################
2319	echo built namelist $TMPDIR/namelist.input.$core.${phys_option}.$compopt
2320	cat $TMPDIR/namelist.input.$core.${phys_option}.$compopt
2321	echo need history interval to be 30
2322	banner 13
2323	#set ans = "$<"
2324	#DAVE###################################################
2325	#DAVE###################################################
2326	echo skipped link of data files, we push them elsewhere
2327	ls -ls met_em*
2328	banner 14
2329	#set ans = "$<"
2330	#DAVE###################################################
2331
2332	# If this is the serial code, generate the IC and BC. The real.exe program is not
2333	# parallelized, so the data is generated and saved for the rest of the parallel tests.
2334	# This data is necessarily updated for each of the physics tests.
2335
2336	if ( $compopt == $COMPOPTS[1] ) then
2337
2338	# Zap any old input data laying around.
2339
2340	rm wrfinput_d01 >& /dev/null
2341	rm wrfbdy_d01 >& /dev/null
2342
2343	if ( $NESTED == TRUE ) then
2344	setenv OMP_NUM_THREADS 1
2345	if ( `uname` == AIX ) then
2346	setenv XLSMPOPTS "parthds=1"
2347	endif
2348	$SERIALRUNCOMMAND ../../main/real_${core}.exe.1 >! print.out.real_${core}_Phys=${phys_option}_Parallel=${compopt}
2349	else if ( $NESTED != TRUE ) then
2350	../../main/real_${core}.exe.1 >! print.out.real_${core}_Phys=${phys_option}_Parallel=${compopt}
2351	endif
2352	#DAVE###################################################
2353	echo finished real
2354	banner 15
2355	#set ans = "$<"
2356	#DAVE###################################################
2357
2358	grep "SUCCESS COMPLETE" print.out.real_${core}_Phys=${phys_option}_Parallel=${compopt} >& /dev/null
2359	set success = $status
2360
2361	# Did making the IC BC files work?
2362
2363	if ( $GLOBAL == FALSE ) then
2364	if ( ( -e wrfinput_d01 ) && ( -e wrfbdy_d01 ) && ( $success == 0 ) ) then
2365	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2366	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2367	else
2368	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2369	$MAIL -s "WRF FAIL making IC/BC $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2370	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 4 )
2371	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2372	endif
2373	else if ( $GLOBAL == TRUE ) then
2374	if ( ( -e wrfinput_d01 ) && ( $success == 0 ) ) then
2375	echo "SUMMARY generate IC for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2376	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2377	else
2378	echo "SUMMARY generate IC for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2379	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2380	$MAIL -s "WRF FAIL making IC $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2381	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 41 )
2382	endif
2383	endif
2384	#DAVE###################################################
2385	echo IC BC must be OK
2386	ls -ls wrfi* wrfb*
2387	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
2388	ncdump -v Times wrfb* \| tail -20
2389	endif
2390	banner 16
2391	#set ans = "$<"
2392	#DAVE###################################################
2393	endif
2394
2395	# Run the forecast for this core, physics package and parallel option
2396
2397	rm $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$compopt >& /dev/null
2398
2399	# The chem run has its own set of namelists, due to special input files.
2400
2401	if ( $CHEM == TRUE ) then
2402
2403	# WRF output quilt servers are only tested for MPI configuration.
2404	# Currently, only one WRF output quilt server is used.
2405
2406	if ( $QUILT == TRUE ) then
2407	if ( $compopt == $COMPOPTS[3] ) then
2408	# For now, test only one group of one output quilt servers.
2409	sed -e 's/ nio_tasks_per_group = [0-9][0-9]*/ nio_tasks_per_group = 1/g' \
2410	-e 's/ nio_groups = [0-9][0-9]*/ nio_groups = 1/g' \
2411	namelist.input >! namelist.input.temp
2412	mv -f namelist.input.temp namelist.input
2413	echo "Building namelist.input.$core.${phys_option}.$compopt with one I/O quilt server enabled."
2414	echo "NOTE one I/O quilt server enabled for $core physics $phys_option parallel $compopt..." >>! ${DEF_DIR}/wrftest.output
2415	endif
2416	endif
2417	endif
2418
2419	if ( $compopt == $COMPOPTS[1] ) then
2420	setenv OMP_NUM_THREADS 1
2421	if ( `uname` == AIX ) then
2422	setenv XLSMPOPTS "parthds=1"
2423	endif
2424	if ( $NESTED == TRUE ) then
2425	$SERIALRUNCOMMAND ../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}
2426	else if ( $NESTED != TRUE ) then
2427	../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}
2428	endif
2429	else if ( $compopt == $COMPOPTS[2] ) then
2430	setenv OMP_NUM_THREADS $OPENMP
2431	if ( `uname` == AIX ) then
2432	setenv XLSMPOPTS "parthds=${OPENMP}"
2433	endif
2434	if ( $NESTED == TRUE ) then
2435	$OMPRUNCOMMAND ../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}
2436	else if ( $NESTED != TRUE ) then
2437	../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}
2438	endif
2439	else if ( $compopt == $COMPOPTS[3] ) then
2440	setenv OMP_NUM_THREADS 1
2441	if ( `uname` == AIX ) then
2442	setenv XLSMPOPTS "parthds=1"
2443	endif
2444	$MPIRUNCOMMAND ../../main/wrf_${core}.exe.$compopt $MPIRUNCOMMANDPOST
2445	mv rsl.error.0000 print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}
2446	endif
2447	#DAVE###################################################
2448	echo ran wrf fcst compopt = $compopt
2449	banner 17
2450	#set ans = "$<"
2451	#DAVE###################################################
2452
2453	grep "SUCCESS COMPLETE" print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}
2454	set success = $status
2455
2456	# Did making the forecast work, by that, we mean "is there an output file created", and "are there 2 times periods".
2457
2458	if ( ( -e wrfout_d01_${filetag} ) && ( $success == 0 ) ) then
2459	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
2460	ncdump -h wrfout_d01_${filetag} \| grep Time \| grep UNLIMITED \| grep currently \| grep -q 2
2461	set ok = $status
2462	set found_nans = 1
2463	if ( `uname` == AIX ) then
2464	ncdump wrfout_d01_${filetag} \| grep NaN >& /dev/null
2465	set found_nans = $status
2466	else if ( `uname` == OSF1 ) then
2467	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
2468	# set found_nans = $status
2469	else if ( `uname` == Linux ) then
2470	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
2471	set found_nans = $status
2472	endif
2473	if ( $found_nans == 0 ) then
2474	echo found nans
2475	set ok = 1
2476	endif
2477
2478	else if ( $IO_FORM_NAME[$IO_FORM] == io_grib1 ) then
2479	# set joe_times = `../../external/io_grib1/wgrib -s -4yr wrfout_d01_${filetag} \| grep -v ":anl:" \| wc -l`
2480	# if ( $joe_times >= 100 ) then
2481	set joe_times = `../../external/io_grib1/wgrib -s -4yr wrfout_d01_${filetag} \| grep "UGRD:10 m" \| wc -l`
2482	if ( $joe_times == 2 ) then
2483	set ok = 0
2484	else
2485	set ok = 1
2486	endif
2487	endif
2488	if ( $ok == 0 ) then
2489	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2490	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2491	else
2492	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2493	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2494	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2495	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 5 )
2496	endif
2497	else
2498	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2499	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2500	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2501	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 6 )
2502	endif
2503	#DAVE###################################################
2504	echo success or failure of fcst
2505	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
2506	ncdump -v Times wrfout_d01_${filetag} \| tail -20
2507	endif
2508	banner 18
2509	#set ans = "$<"
2510	#DAVE###################################################
2511
2512	# We have to save this output file for our biggy comparison after all of the
2513	# parallel options have been considered.
2514
2515	mv wrfout_d01_${filetag} $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$compopt
2516
2517	# To save space, we move the executables after we are finished with them.
2518
2519	if ( $phys_option == $PHYSOPTS[${#PHYSOPTS}] ) then
2520	mv ../../main/wrf_${core}.exe.$compopt $TMPDIR/wrf_${core}.exe.$compopt
2521	endif
2522
2523	popd
2524
2525	BYPASS_COMP_LOOP_REAL:
2526
2527	end
2528
2529	else if ( $core == nmm_real && ( $HWRF == FALSE ) ) then
2530	#DAVE###################################################
2531	echo doing nmm pre no-nest
2532	banner 19
2533	#set ans = "$<"
2534	#DAVE###################################################
2535
2536	set compopt = $COMPOPTS[3] # ! parallel only
2537	set filetag = 2005-01-23_00:00:00
2538	set phys_option=1
2539	pushd test/$core
2540
2541	#DAVE###################################################
2542	echo did rms
2543	echo $filetag $phys_option
2544	banner 19a
2545	#set ans = "$<"
2546	#DAVE###################################################
2547
2548	# Build NMM namelist
2549
2550	cp ${CUR_DIR}/io_format io_format
2551	sed -e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
2552	namelist.input.regtest >! namelist.input.temp
2553
2554	# A fairly short forecast, 10 time steps
2555
2556	sed -e 's/^ run_days = [0-9]*/ run_days = 0 /' \
2557	-e 's/^ run_seconds = [0-9]*/ run_seconds = 1800 /' \
2558	-e 's/^ history_interval = [0-9][0-9]*/ history_interval = 30,30 /' \
2559	-e 's/^ frames_per_outfile = [0-9]/ frames_per_outfile = 200/g' \
2560	namelist.input.temp >! namelist.input
2561
2562	#DAVE###################################################
2563	echo did cp of namelist no-nest
2564	ls -ls namelist.input
2565	cat namelist.input
2566	banner 19b
2567	#set ans = "$<"
2568	#DAVE###################################################
2569
2570	# Generate IC/BC for NMM run
2571
2572	set RUNCOMMAND = `echo $MPIRUNCOMMAND \| sed "s/$Num_Procs/1/"`
2573
2574	# Zap any old input data laying around.
2575
2576	rm wrfinput_d01 >& /dev/null
2577	rm wrfbdy_d01 >& /dev/null
2578
2579	$RUNCOMMAND ../../main/real_${core}.exe.$COMPOPTS[3] >! print.out.real_${core}_Phys=${phys_option}_Parallel=$COMPOPTS[3]
2580	#DAVE###################################################
2581	echo finished real no-nest
2582	banner 19c
2583	#set ans = "$<"
2584	#DAVE###################################################
2585
2586	mv rsl.out.0000 print.out.real_${core}_Phys=${phys_option}_Parallel=${compopt}
2587	grep "SUCCESS COMPLETE" print.out.real_${core}_Phys=${phys_option}_Parallel=${compopt} >& /dev/null
2588	set success = $status
2589
2590	# Did making the IC BC files work?
2591
2592	if ( ( -e wrfinput_d01 ) && ( -e wrfbdy_d01 ) && ( $success == 0 ) ) then
2593	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2594	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2595	else
2596	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2597	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2598	$MAIL -s "WRF FAIL making IC/BC $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2599	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 4 )
2600	endif
2601	#DAVE###################################################
2602	echo IC BC must be OK no-nest
2603	ls -lsL wrfinput* wrfb*
2604	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
2605	ncdump -v Times wrfb* \| tail -20
2606	endif
2607	banner 20
2608	#set ans = "$<"
2609	#DAVE###################################################
2610
2611	# Run on 1 and then on Num_Procs processors
2612
2613	foreach n ( 1 $Num_Procs )
2614	#DAVE###################################################
2615	echo running nmm on $n procs no-nest
2616	banner 21
2617	#set ans = "$<"
2618	#DAVE###################################################
2619
2620	if ( ( $n != 1 ) && ( $QUILT != TRUE ) ) then
2621	@ nmm_proc = $Num_Procs
2622	cat >! nproc_xy << EOF
2623	nproc_x = $nmm_proc
2624	nproc_y = 1
2625	EOF
2626	sed -e '/^ numtiles/r nproc_xy' namelist.input >! file.foo
2627	mv file.foo namelist.input
2628	else if ( ( $n != 1 ) && ( $QUILT == TRUE ) ) then
2629	@ nmm_proc = $Num_Procs - 1
2630	cat >! nproc_xy << EOF
2631	nproc_x = $nmm_proc
2632	nproc_y = 1
2633	EOF
2634	sed -e '/^ numtiles/r nproc_xy' namelist.input >! file.foo
2635	mv file.foo namelist.input
2636	endif
2637
2638	if ( `uname` == AIX ) then
2639	set RUNCOMMAND = $MPIRUNCOMMAND
2640	else
2641	set RUNCOMMAND = `echo $MPIRUNCOMMAND \| sed "s/$Num_Procs/$n/"`
2642	endif
2643
2644	# WRF output quilt servers are only tested for MPI configuration.
2645	# Currently, only one WRF output quilt server is used.
2646
2647	if ( ( $QUILT == TRUE ) && ( $n == $Num_Procs ) ) then
2648	if ( $compopt == $COMPOPTS[3] ) then
2649	# For now, test only one group of one output quilt servers.
2650	sed -e 's/ nio_tasks_per_group = [0-9]*/ nio_tasks_per_group = 1/g' \
2651	-e 's/ nio_groups = [0-9]*/ nio_groups = 1/g' \
2652	namelist.input >! namelist.input.temp
2653	mv -f namelist.input.temp namelist.input
2654	echo "Building namelist.input.$core.${phys_option}.$compopt with one I/O quilt server enabled."
2655	echo "NOTE one I/O quilt server enabled for $core physics $phys_option parallel $compopt..." >>! ${DEF_DIR}/wrftest.output
2656	endif
2657	endif
2658
2659	# NMM can fail on spurious fp exceptions that don't affect soln. Retry if necessary.
2660
2661	set tries=0
2662	while ( $tries < 2 )
2663	#DAVE###################################################
2664	echo try attempt $tries allowed to be less than 2
2665	banner 22
2666	#set ans = "$<"
2667	#DAVE###################################################
2668	@ tries = $tries + 1
2669	$RUNCOMMAND ../../main/wrf_${core}.exe.$compopt $MPIRUNCOMMANDPOST
2670	mv rsl.error.0000 print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}_${n}p
2671	grep "SUCCESS COMPLETE" print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}_${n}p
2672	set success = $status
2673	set ok = $status
2674	if ( ( -e wrfout_d01_${filetag} ) && ( $success == 0 ) ) then
2675	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
2676	ncdump -h wrfout_d01_${filetag} \| grep Time \| grep UNLIMITED \| grep currently \| grep -q 2
2677	set ok = $status
2678	set found_nans = 1
2679	if ( `uname` == AIX ) then
2680	ncdump wrfout_d01_${filetag} \| grep NaN >& /dev/null
2681	set found_nans = $status
2682	else if ( `uname` == OSF1 ) then
2683	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
2684	# set found_nans = $status
2685	else if ( `uname` == Linux ) then
2686	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
2687	set found_nans = $status
2688	endif
2689	if ( $found_nans == 0 ) then
2690	echo found nans
2691	set ok = 1
2692	endif
2693
2694	else if ( $IO_FORM_NAME[$IO_FORM] == io_grib1 ) then
2695	../../external/io_grib1/wgrib -s -4yr wrfout_d01_${filetag} \| grep "UGRD:10 m above gnd:3600 sec fcst"
2696	set ok = $status
2697	endif
2698	if ( $ok == 0 ) then
2699	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2700	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2701	set tries=2 # success, bail from loop
2702	else
2703	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2704	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2705	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2706	if ( if ( $KEEP_ON_RUNNING == FALSE ) && ( $tries == 2 ) )exit ( 5 )
2707	endif
2708	else
2709	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2710	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2711	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2712	if ( if ( $KEEP_ON_RUNNING == FALSE ) && ( $tries == 2 ) ) exit ( 6 )
2713	endif
2714	mv wrfout_d01_${filetag} $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.${compopt}_${n}p
2715	#DAVE###################################################
2716	echo did nmm fcst no-nest
2717	ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.${compopt}_${n}p
2718	banner 23
2719	#set ans = "$<"
2720	#DAVE###################################################
2721	end
2722	end
2723
2724	popd
2725
2726	#DAVE###################################################
2727	echo doing nmm pre nesting
2728	banner 19
2729	#set ans = "$<"
2730	#DAVE###################################################
2731
2732	set compopt = $COMPOPTS[3] # ! parallel only
2733	set filetag = 2008-03-06_00:00:00
2734	set phys_option=1
2735	pushd test/$core
2736
2737	#DAVE###################################################
2738	echo did rms
2739	echo $filetag $phys_option
2740	banner 19a
2741	#set ans = "$<"
2742	#DAVE###################################################
2743
2744	# Build NMM namelist
2745
2746	cp ${CUR_DIR}/io_format io_format
2747	sed -e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
2748	namelist.nest.regtest >! namelist.input.temp
2749
2750	# A fairly short forecast, 10 time steps
2751
2752	sed -e 's/^ run_hours = [0-9]*/ run_hours = 0 /' \
2753	-e 's/^ run_seconds = [0-9]*/ run_seconds = 1800 /' \
2754	-e 's/^ history_interval = [0-9][0-9]*/ history_interval = 30,30 /' \
2755	-e 's/^ frames_per_outfile = [0-9]/ frames_per_outfile = 200/g' \
2756	namelist.input.temp >! namelist.input
2757
2758	#DAVE###################################################
2759	echo did cp of namelist nesting
2760	ls -ls namelist.input
2761	cat namelist.input
2762	banner 19b
2763	#set ans = "$<"
2764	#DAVE###################################################
2765
2766	# Generate IC/BC for NMM run
2767
2768	set RUNCOMMAND = `echo $MPIRUNCOMMAND \| sed "s/$Num_Procs/1/"`
2769
2770	# Zap any old input data laying around.
2771
2772	rm wrfinput_d01 >& /dev/null
2773	rm wrfbdy_d01 >& /dev/null
2774
2775	$RUNCOMMAND ../../main/real_${core}.exe.$COMPOPTS[3] >! print.out.real_${core}_Phys=${phys_option}_Parallel_Nest=$COMPOPTS[3]
2776	#DAVE###################################################
2777	echo finished real nesting
2778	banner 19c
2779	#set ans = "$<"
2780	#DAVE###################################################
2781
2782	mv rsl.out.0000 print.out.real_${core}_Phys=${phys_option}_Parallel=${compopt}
2783	grep "SUCCESS COMPLETE" print.out.real_${core}_Phys=${phys_option}_Parallel=${compopt} >& /dev/null
2784	set success = $status
2785
2786	# Did making the IC BC files work?
2787
2788	if ( ( -e wrfinput_d01 ) && ( -e wrfbdy_d01 ) && ( $success == 0 ) ) then
2789	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel nest $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2790	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2791	else
2792	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel nest $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2793	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2794	$MAIL -s "WRF FAIL making IC/BC $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2795	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 4 )
2796	endif
2797	#DAVE###################################################
2798	echo IC BC must be OK nesting
2799	ls -lsL wrfinput* wrfb*
2800	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
2801	ncdump -v Times wrfb* \| tail -20
2802	endif
2803	banner 20
2804	#set ans = "$<"
2805	#DAVE###################################################
2806
2807	# Run on 1 and then on Num_Procs processors
2808
2809	#LPC
2810	foreach n ( 1 $Num_Procs )
2811	#DAVE###################################################
2812	echo running nmm on $n procs nesting
2813	banner 21
2814	#set ans = "$<"
2815	#DAVE###################################################
2816
2817	if ( ( $n != 1 ) && ( $QUILT != TRUE ) ) then
2818	@ nmm_proc = $Num_Procs
2819	#LPC
2820	cat >! nproc_xy << EOF
2821	nproc_x = $nmm_proc
2822	nproc_y = 1
2823	EOF
2824	sed -e '/^ numtiles/r nproc_xy' namelist.input >! file.foo
2825	mv file.foo namelist.input
2826	else if ( ( $n != 1 ) && ( $QUILT == TRUE ) ) then
2827	@ nmm_proc = $Num_Procs - 1
2828	#LPC
2829	cat >! nproc_xy << EOF
2830	nproc_x = $nmm_proc
2831	nproc_y = 1
2832	EOF
2833	sed -e '/^ numtiles/r nproc_xy' namelist.input >! file.foo
2834	mv file.foo namelist.input
2835	endif
2836
2837	if ( `uname` == AIX ) then
2838	set RUNCOMMAND = $MPIRUNCOMMAND
2839	else
2840	set RUNCOMMAND = `echo $MPIRUNCOMMAND \| sed "s/$Num_Procs/$n/"`
2841	endif
2842
2843	# WRF output quilt servers are only tested for MPI configuration.
2844	# Currently, only one WRF output quilt server is used.
2845
2846	if ( ( $QUILT == TRUE ) && ( $n == $Num_Procs ) ) then
2847	if ( $compopt == $COMPOPTS[3] ) then
2848	# For now, test only one group of one output quilt servers.
2849	sed -e 's/ nio_tasks_per_group = [0-9]*/ nio_tasks_per_group = 1/g' \
2850	-e 's/ nio_groups = [0-9]*/ nio_groups = 1/g' \
2851	namelist.input >! namelist.input.temp
2852	mv -f namelist.input.temp namelist.input
2853	echo "Building namelist.input.$core.${phys_option}.$compopt with one I/O quilt server enabled."
2854	echo "NOTE one I/O quilt server enabled for $core physics $phys_option parallel $compopt..." >>! ${DEF_DIR}/wrftest.output
2855	endif
2856	endif
2857
2858	# NMM can fail on spurious fp exceptions that don't affect soln. Retry if necessary.
2859
2860	set tries=0
2861	while ( $tries < 2 )
2862	#DAVE###################################################
2863	echo try attempt $tries allowed to be less than 2
2864	banner 22
2865	#set ans = "$<"
2866	#DAVE###################################################
2867	@ tries = $tries + 1
2868	$RUNCOMMAND ../../main/wrf_${core}.exe.$compopt $MPIRUNCOMMANDPOST
2869	ls -lsL rsl*
2870	mv rsl.error.0000 print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}_${n}p
2871	grep "SUCCESS COMPLETE" print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}_${n}p
2872	set success = $status
2873	set ok = $status
2874	if ( ( -e wrfout_d01_${filetag} ) && ( $success == 0 ) ) then
2875	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
2876	ncdump -h wrfout_d01_${filetag} \| grep Time \| grep UNLIMITED \| grep currently \| grep -q 2
2877	set ok = $status
2878	set found_nans = 1
2879	if ( `uname` == AIX ) then
2880	ncdump wrfout_d01_${filetag} \| grep NaN >& /dev/null
2881	set found_nans = $status
2882	else if ( `uname` == OSF1 ) then
2883	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
2884	# set found_nans = $status
2885	else if ( `uname` == Linux ) then
2886	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
2887	set found_nans = $status
2888	endif
2889	if ( $found_nans == 0 ) then
2890	echo found nans
2891	set ok = 1
2892	endif
2893
2894	else if ( $IO_FORM_NAME[$IO_FORM] == io_grib1 ) then
2895	../../external/io_grib1/wgrib -s -4yr wrfout_d01_${filetag} \| grep "UGRD:10 m above gnd:3600 sec fcst"
2896	set ok = $status
2897	endif
2898	if ( $ok == 0 ) then
2899	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
2900	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2901	set tries=2 # success, bail from loop
2902	else
2903	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2904	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2905	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2906	if ( if ( $KEEP_ON_RUNNING == FALSE ) && ( $tries == 2 ) )exit ( 5 )
2907	endif
2908	else
2909	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
2910	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
2911	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
2912	if ( if ( $KEEP_ON_RUNNING == FALSE ) && ( $tries == 2 ) ) exit ( 6 )
2913	endif
2914	mv wrfout_d01_${filetag} $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.${compopt}_${n}p
2915	/bin/cp namelist.input $TMPDIR/namelist.input.$core.${phys_option}.$compopt
2916	#DAVE###################################################
2917	echo did nmm fcst with nesting
2918	ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.${compopt}_${n}p
2919	banner 23
2920	#set ans = "$<"
2921	#DAVE###################################################
2922	end
2923	end
2924
2925	popd
2926
2927	else if ( $core == nmm_real && ( $HWRF == TRUE ) ) then
2928	#DAVE###################################################
2929	echo doing hwrf-nmm pre
2930	banner 19
2931	#set ans = "$<"
2932	#DAVE###################################################
2933
2934	set compopt = $COMPOPTS[3] # ! parallel only
2935	set filetag = 2008-09-09_00:00:00
2936	set phys_option=1
2937	pushd test/$core
2938
2939	#DAVE###################################################
2940	echo did rms
2941	echo $filetag $phys_option
2942	banner 19a
2943	#set ans = "$<"
2944	#DAVE###################################################
2945
2946	# Build NMM namelist
2947
2948	cp ${CUR_DIR}/io_format io_format
2949	sed -e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
2950	namelist.input.hwrf >! namelist.input.temp
2951
2952	# A fairly short forecast, 10 time steps
2953
2954	sed -e 's/^ run_hours = [0-9]*/ run_hours = 0 /' \
2955	-e 's/^ run_seconds = [0-9]*/ run_seconds = 1800 /' \
2956	-e 's/^ history_interval = [0-9][0-9]*/ history_interval = 30,30 /' \
2957	-e 's/^ frames_per_outfile = [0-9]/ frames_per_outfile = 200/g' \
2958	namelist.input.temp >! namelist.input
2959
2960	ln -s wrfinput_hwrf_d01.${filetag} wrfinput_d01 ;
2961	ln -s wrfbdy_hwrf_d01.${filetag} wrfbdy_d01 ;
2962	#DAVE###################################################
2963	echo did cp of namelist hwrf
2964	ls -ls namelist.input
2965	cat namelist.input
2966	banner 19b
2967	#set ans = "$<"
2968	#DAVE###################################################
2969
2970
2971	# Run on 1 and then on Num_Procs processors
2972
2973	foreach n ( 1 $Num_Procs )
2974	#DAVE###################################################
2975	echo running hwrf on $n procs
2976	banner 21
2977	#set ans = "$<"
2978	#DAVE###################################################
2979
2980	if ( ( $n != 1 ) && ( $QUILT != TRUE ) ) then
2981	@ nmm_proc = $Num_Procs
2982	#LPC
2983	cat >! nproc_xy << EOF
2984	nproc_x = $nmm_proc
2985	nproc_y = 1
2986	EOF
2987	sed -e '/^ numtiles/r nproc_xy' namelist.input >! file.foo
2988	mv file.foo namelist.input
2989	else if ( ( $n != 1 ) && ( $QUILT == TRUE ) ) then
2990	@ nmm_proc = $Num_Procs - 1
2991	#LPC
2992	cat >! nproc_xy << EOF
2993	nproc_x = $nmm_proc
2994	nproc_y = 1
2995	EOF
2996	sed -e '/^ numtiles/r nproc_xy' namelist.input >! file.foo
2997	mv file.foo namelist.input
2998	endif
2999
3000	if ( `uname` == AIX ) then
3001	set RUNCOMMAND = $MPIRUNCOMMAND
3002	else
3003	set RUNCOMMAND = `echo $MPIRUNCOMMAND \| sed "s/$Num_Procs/$n/"`
3004	endif
3005
3006	# WRF output quilt servers are only tested for MPI configuration.
3007	# Currently, only one WRF output quilt server is used.
3008
3009	if ( ( $QUILT == TRUE ) && ( $n == $Num_Procs ) ) then
3010	if ( $compopt == $COMPOPTS[3] ) then
3011	# For now, test only one group of one output quilt servers.
3012	sed -e 's/ nio_tasks_per_group = [0-9]*/ nio_tasks_per_group = 1/g' \
3013	-e 's/ nio_groups = [0-9]*/ nio_groups = 1/g' \
3014	namelist.input >! namelist.input.temp
3015	mv -f namelist.input.temp namelist.input
3016	echo "Building namelist.input.$core.${phys_option}.$compopt with one I/O quilt server enabled."
3017	echo "NOTE one I/O quilt server enabled for $core physics $phys_option parallel $compopt..." >>! ${DEF_DIR}/wrftest.output
3018	endif
3019	endif
3020
3021	# NMM can fail on spurious fp exceptions that don't affect soln. Retry if necessary.
3022
3023	set tries=0
3024	while ( $tries < 2 )
3025	#DAVE###################################################
3026	echo try attempt $tries allowed to be less than 2
3027	banner 22
3028	#set ans = "$<"
3029	#DAVE###################################################
3030	@ tries = $tries + 1
3031	$RUNCOMMAND ../../main/wrf_${core}.exe.$compopt $MPIRUNCOMMANDPOST
3032	ls -lsL rsl*
3033	mv rsl.error.0000 print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}_${n}p
3034	grep "SUCCESS COMPLETE" print.out.wrf_${core}_Phys=${phys_option}_Parallel=${compopt}_${n}p
3035	set success = $status
3036	set ok = $status
3037	if ( ( -e wrfout_d01_${filetag} ) && ( $success == 0 ) ) then
3038	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
3039	ncdump -h wrfout_d01_${filetag} \| grep Time \| grep UNLIMITED \| grep currently \| grep -q 2
3040	set ok = $status
3041	set found_nans = 1
3042	if ( `uname` == AIX ) then
3043	ncdump wrfout_d01_${filetag} \| grep NaN >& /dev/null
3044	set found_nans = $status
3045	else if ( `uname` == OSF1 ) then
3046	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
3047	# set found_nans = $status
3048	else if ( `uname` == Linux ) then
3049	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
3050	set found_nans = $status
3051	endif
3052	if ( $found_nans == 0 ) then
3053	echo found nans
3054	set ok = 1
3055	endif
3056
3057	else if ( $IO_FORM_NAME[$IO_FORM] == io_grib1 ) then
3058	../../external/io_grib1/wgrib -s -4yr wrfout_d01_${filetag} \| grep "UGRD:10 m above gnd:3600 sec fcst"
3059	set ok = $status
3060	endif
3061	if ( $ok == 0 ) then
3062	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
3063	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3064	set tries=2 # success, bail from loop
3065	else
3066	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3067	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3068	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
3069	if ( if ( $KEEP_ON_RUNNING == FALSE ) && ( $tries == 2 ) )exit ( 5 )
3070	endif
3071	else
3072	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3073	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3074	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
3075	if ( if ( $KEEP_ON_RUNNING == FALSE ) && ( $tries == 2 ) ) exit ( 6 )
3076	endif
3077	mv wrfout_d01_${filetag} $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.${compopt}_${n}p
3078	/bin/cp namelist.input $TMPDIR/namelist.input.$core.${phys_option}.$compopt
3079	#DAVE###################################################
3080	echo did hwrf fcst
3081	ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.${compopt}_${n}p
3082	banner 23
3083	#set ans = "$<"
3084	#DAVE###################################################
3085	end
3086	end
3087
3088	popd
3089
3090	else
3091
3092	#DAVE###################################################
3093	echo doing ideal runs
3094	banner 24
3095	#set ans = "$<"
3096	#DAVE###################################################
3097	# The ideal cases have different physics tests than the real cases. If this is
3098	# more that the total number of ideal physics experiments that we were led to
3099	# believe would exist, jump to the end of the physics loop.
3100
3101	if ( $phys_option > $Max_Ideal_Physics_Options ) then
3102	goto BOTTOM_OF_PHYSICS_LOOP
3103	endif
3104
3105	set filetag=$filetag_ideal
3106
3107	foreach compopt ( $COMPOPTS )
3108	#DAVE###################################################
3109	echo doing compopt = $compopt
3110	echo filetag = $filetag
3111	banner 25
3112	#set ans = "$<"
3113	#DAVE###################################################
3114
3115
3116	# We sometimes are interested in bypassing the OpenMP option.
3117
3118	if ( $compopt == $COMPOPTS[2] ) then
3119	if ( $ZAP_OPENMP == TRUE ) then
3120	goto BYPASS_COMP_LOOP_IDEAL
3121	endif
3122	endif
3123
3124	pushd test/$core
3125
3126	if ( ! -e namelist.input.template ) cp namelist.input namelist.input.template
3127
3128	# Create the correct namelist.input file.
3129
3130	cp ${CUR_DIR}/dom_ideal dom_ideal
3131	if ( $core == em_quarter_ss ) then
3132	cp ${CUR_DIR}/phys_quarter_ss_${phys_option}a phys_tke
3133	cp ${CUR_DIR}/phys_quarter_ss_${phys_option}b phys_mp
3134	cp ${CUR_DIR}/phys_quarter_ss_${phys_option}c phys_nh
3135	cp ${CUR_DIR}/phys_quarter_ss_${phys_option}d phys_nest
3136	cp ${CUR_DIR}/phys_quarter_ss_${phys_option}e phys_bc
3137	cp ${CUR_DIR}/phys_quarter_ss_${phys_option}f phys_sfclay
3138	else if ( $core == em_b_wave ) then
3139	cp ${CUR_DIR}/phys_b_wave_${phys_option}a phys_tke
3140	cp ${CUR_DIR}/phys_b_wave_${phys_option}b phys_mp
3141	cp ${CUR_DIR}/phys_b_wave_${phys_option}c phys_nh
3142	cp ${CUR_DIR}/phys_b_wave_${phys_option}d phys_nest
3143	endif
3144
3145	cp ${CUR_DIR}/io_format io_format
3146	if ( $NESTED == TRUE ) then
3147	if ( $core == em_quarter_ss ) then
3148	sed -e 's/ run_days = [0-9][0-9]*/ run_days = 00/g' \
3149	-e 's/ run_minutes = [0-9][0-9]*/ run_minutes = 1/g' \
3150	-e 's/ run_seconds = [0-9][0-9]*/ run_seconds = 0/g' \
3151	-e 's/ history_interval = [0-9][0-9]/ history_interval = 1/g' \
3152	-e 's/ frames_per_outfile = [0-9][0-9]/ frames_per_outfile = 100/g' \
3153	-e '/^ diff_opt/d' -e '/^ km_opt/d' -e '/^ damp_opt/d' -e '/^ rk_ord/r ./phys_tke' \
3154	-e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
3155	-e '/^ mp_physics/d' -e '/^ &physics/r ./phys_mp' \
3156	-e '/^ sf_sfclay_physics/d' -e '/^ radt/r ./phys_sfclay' \
3157	-e '/^ moist_adv_opt/,/^ non_hydrostatic/d' -e '/^ v_sca_adv_order/r ./phys_nh' \
3158	-e '/^ periodic_x /,/^ open_ye/d' \
3159	-e '/^ &bdy_control/r ./phys_bc' \
3160	-e '/^ max_dom/d' -e '/^ time_step_fract_den/r ./dom_ideal' \
3161	./namelist.input.template >! namelist.input
3162	else if ( $core == em_b_wave ) then
3163	sed -e 's/ run_days = [0-9][0-9]*/ run_days = 00/g' \
3164	-e 's/ run_minutes = [0-9][0-9]*/ run_minutes = 20/g' \
3165	-e 's/ history_interval = [0-9][0-9]/ history_interval = 20/g' \
3166	-e 's/ frames_per_outfile = [0-9][0-9]/ frames_per_outfile = 100/g' \
3167	-e '/^ diff_opt/d' -e '/^ km_opt/d' -e '/^ damp_opt/d' -e '/^ rk_ord/r ./phys_tke' \
3168	-e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
3169	-e '/^ mp_physics/d' -e '/^ &physics/r ./phys_mp' \
3170	-e '/^ non_hydrostatic/d' -e '/^ v_sca_adv_order/r ./phys_nh' \
3171	-e '/^ max_dom/d' -e '/^ time_step_fract_den/r ./dom_ideal' \
3172	./namelist.input.template >! namelist.input
3173	endif
3174	else if ( $NESTED != TRUE ) then
3175	if ( $core == em_quarter_ss ) then
3176	sed -e 's/ run_days = [0-9][0-9]*/ run_days = 00/g' \
3177	-e 's/ run_minutes = [0-9][0-9]*/ run_minutes = 2/g' \
3178	-e 's/ history_interval = [0-9][0-9]/ history_interval = 2/g' \
3179	-e 's/ frames_per_outfile = [0-9][0-9]/ frames_per_outfile = 100/g' \
3180	-e '/^ diff_opt/d' -e '/^ km_opt/d' -e '/^ damp_opt/d' -e '/^ rk_ord/r ./phys_tke' \
3181	-e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
3182	-e '/^ mp_physics/d' -e '/^ &physics/r ./phys_mp' \
3183	-e '/^ sf_sfclay_physics/d' -e '/^ radt/r ./phys_sfclay' \
3184	-e '/^ moist_adv_opt/,/^ non_hydrostatic/d' -e '/^ v_sca_adv_order/r ./phys_nh' \
3185	-e '/^ periodic_x/d' -e '/^ open_xs/d' -e '/^ open_xe/d' \
3186	-e '/^ periodic_y/d' -e '/^ open_ys/d' -e '/^ open_ye/d' \
3187	-e '/^ &bdy_control/r ./phys_bc' \
3188	-e '/^ max_dom/d' -e '/^ time_step_fract_den/r ./dom_ideal' \
3189	./namelist.input.template >! namelist.input
3190	else if ( $core == em_b_wave ) then
3191	sed -e 's/ run_days = [0-9][0-9]*/ run_days = 00/g' \
3192	-e 's/ run_minutes = [0-9][0-9]*/ run_minutes = 100/g' \
3193	-e 's/ history_interval = [0-9][0-9]/ history_interval = 100/g' \
3194	-e 's/ frames_per_outfile = [0-9][0-9]/ frames_per_outfile = 100/g' \
3195	-e '/^ diff_opt/d' -e '/^ km_opt/d' -e '/^ damp_opt/d' -e '/^ rk_ord/r ./phys_tke' \
3196	-e '/^ io_form_history /,/^ io_form_boundary/d' -e '/^ restart_interval/r ./io_format' \
3197	-e '/^ mp_physics/d' -e '/^ &physics/r ./phys_mp' \
3198	-e '/^ non_hydrostatic/d' -e '/^ v_sca_adv_order/r ./phys_nh' \
3199	-e '/^ max_dom/d' -e '/^ time_step_fract_den/r ./dom_ideal' \
3200	./namelist.input.template >! namelist.input
3201	endif
3202	endif
3203
3204	# WRF output quilt servers are only tested for MPI configuration.
3205	# Currently, only one WRF output quilt server is used.
3206
3207	if ( $QUILT == TRUE ) then
3208	if ( $compopt == $COMPOPTS[3] ) then
3209	# For now, test only one group of one output quilt servers.
3210	sed -e 's/ nio_tasks_per_group = [0-9][0-9]*/ nio_tasks_per_group = 1/g' \
3211	-e 's/ nio_groups = [0-9][0-9]*/ nio_groups = 1/g' \
3212	namelist.input >! namelist.input.temp
3213	mv -f namelist.input.temp namelist.input
3214	echo "Building namelist.input.$core.${phys_option}.$compopt with one I/O quilt server enabled."
3215	echo "NOTE one I/O quilt server enabled for $core physics $phys_option parallel $compopt..." >>! ${DEF_DIR}/wrftest.output
3216	endif
3217	endif
3218
3219	/bin/cp namelist.input $TMPDIR/namelist.input.$core.${phys_option}.$compopt
3220	#DAVE###################################################
3221	echo built namelist
3222	ls -ls namelist.input
3223	banner 26
3224	#set ans = "$<"
3225	#DAVE###################################################
3226
3227	# If this is the serial code, generate the IC and BC. The ideal.exe program is not
3228	# parallelized, so the data is generated and saved for the rest of the parallel tests.
3229
3230	if ( $compopt == $COMPOPTS[1] ) then
3231
3232	# Zap any old input data laying around.
3233
3234	rm wrfinput_d01 >& /dev/null
3235	rm wrfbdy_d01 >& /dev/null
3236
3237	../../main/ideal_${core}.exe.1 >! print.out.ideal_${core}_Parallel=${compopt}
3238	#DAVE###################################################
3239	echo ran ideal
3240	ls -ls wrfinput*
3241	banner 27
3242	#set ans = "$<"
3243	#DAVE###################################################
3244
3245	grep "SUCCESS COMPLETE" print.out.ideal_${core}_Parallel=${compopt} >& /dev/null
3246	set success = $status
3247
3248	# Did making the IC BC files work?
3249
3250	if ( ( -e wrfinput_d01 ) && ( $success == 0 ) ) then
3251	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
3252	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3253	else
3254	echo "SUMMARY generate IC/BC for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3255	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3256	$MAIL -s "WRF FAIL making IC/BC $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
3257	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 7 )
3258	endif
3259	endif
3260
3261	# Run the forecast for this core and parallel option
3262
3263	rm $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$compopt >& /dev/null
3264
3265	if ( $compopt == $COMPOPTS[1] ) then
3266	setenv OMP_NUM_THREADS 1
3267	if ( `uname` == AIX ) then
3268	setenv XLSMPOPTS "parthds=1"
3269	endif
3270	if ( $NESTED == TRUE ) then
3271	$SERIALRUNCOMMAND ../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Parallel=${compopt}
3272	else if ( $NESTED != TRUE ) then
3273	../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Parallel=${compopt}
3274	endif
3275	else if ( $compopt == $COMPOPTS[2] ) then
3276	setenv OMP_NUM_THREADS $OPENMP
3277	if ( `uname` == AIX ) then
3278	setenv XLSMPOPTS "parthds=${OPENMP}"
3279	endif
3280	if ( $NESTED == TRUE ) then
3281	$OMPRUNCOMMAND ../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Parallel=${compopt}
3282	else if ( $NESTED != TRUE ) then
3283	../../main/wrf_${core}.exe.$compopt >! print.out.wrf_${core}_Parallel=${compopt}
3284	endif
3285	else if ( $compopt == $COMPOPTS[3] ) then
3286	setenv OMP_NUM_THREADS 1
3287	if ( `uname` == AIX ) then
3288	setenv XLSMPOPTS "parthds=1"
3289	endif
3290	$MPIRUNCOMMAND ../../main/wrf_${core}.exe.$compopt $MPIRUNCOMMANDPOST
3291	mv rsl.error.0000 print.out.wrf_${core}_Parallel=${compopt}
3292	endif
3293	#DAVE###################################################
3294	echo ran ideal fcst
3295	banner 28
3296	#set ans = "$<"
3297	#DAVE###################################################
3298
3299	grep "SUCCESS COMPLETE" print.out.wrf_${core}_Parallel=${compopt}
3300	set success = $status
3301
3302	# Did making the forecast work, by that, we mean "is there an output file created?"
3303
3304	if ( ( -e wrfout_d01_${filetag} ) && ( $success == 0 ) ) then
3305	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
3306	ncdump -h wrfout_d01_${filetag} \| grep Time \| grep UNLIMITED \| grep currently \| grep -q 2
3307	set ok = $status
3308	set found_nans = 1
3309	if ( `uname` == AIX ) then
3310	ncdump wrfout_d01_${filetag} \| grep NaN >& /dev/null
3311	set found_nans = $status
3312	else if ( `uname` == OSF1 ) then
3313	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
3314	# set found_nans = $status
3315	else if ( `uname` == Linux ) then
3316	ncdump wrfout_d01_${filetag} \| grep nan >& /dev/null
3317	set found_nans = $status
3318	endif
3319	if ( $found_nans == 0 ) then
3320	echo found nans
3321	set ok = 1
3322	endif
3323
3324	else if ( $IO_FORM_NAME[$IO_FORM] == io_grib1 ) then
3325	# set joe_times = `../../external/io_grib1/wgrib -s -4yr wrfout_d01_${filetag} \| grep -v ":anl:" \| wc -l`
3326	# if ( $joe_times >= 100 ) then
3327	set joe_times = `../../external/io_grib1/wgrib -s -4yr wrfout_d01_${filetag} \| grep "UGRD:10 m" \| wc -l`
3328	if ( $joe_times == 2 ) then
3329	set ok = 0
3330	else
3331	set ok = 1
3332	endif
3333	endif
3334	if ( $ok == 0 ) then
3335	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
3336	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3337	else
3338	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3339	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3340	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
3341	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 8 )
3342	endif
3343	else
3344	echo "SUMMARY generate FCST for $core physics $phys_option parallel $compopt $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3345	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3346	$MAIL -s "WRF FAIL FCST $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
3347	if ( $KEEP_ON_RUNNING == FALSE ) exit ( 9 )
3348	endif
3349
3350	# We have to save this output file for our biggy comparison after all of the
3351	# parallel options have been considered.
3352
3353	mv wrfout_d01_${filetag} $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$compopt
3354
3355	# To save space, we move the executables after we are finished with them.
3356
3357	if ( $phys_option == $Max_Ideal_Physics_Options ) then
3358	mv ../../main/wrf_${core}.exe.$compopt $TMPDIR/wrf_${core}.exe.$compopt
3359	endif
3360	#DAVE###################################################
3361	echo fcst was a success
3362	ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$compopt
3363	if ( $IO_FORM_NAME[$IO_FORM] == io_netcdf ) then
3364	ncdump -v Times $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$compopt \| tail -20
3365	endif
3366	banner 29
3367	#set ans = "$<"
3368	#DAVE###################################################
3369
3370	popd
3371
3372	BYPASS_COMP_LOOP_IDEAL:
3373
3374	end
3375
3376	endif
3377
3378	# OK, once more, we gotta check if this is a BIT4BIT run. If so then there
3379	# are a number of comparisons to do. If this is a an OPTIMIZED run, then the
3380	# comparisons will fail the bit-wise comparisons.
3381
3382	if ( $REG_TYPE == BIT4BIT) then
3383
3384	if ( $core == nmm_real ) then
3385
3386	pushd ${DEF_DIR}/regression_test/WRFV3/test/$core
3387	set DIFFWRF = ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf
3388
3389	if ( ( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_1p ) && \
3390	( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_${Num_Procs}p ) ) then
3391	set foo1 = ( ` \ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_1p `)
3392	set foo2 = ( ` \ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_${Num_Procs}p `)
3393	set size1 = $foo1[6]
3394	set size2 = $foo2[6]
3395	if ( $size1 == $size2 ) then
3396	set RIGHT_SIZE = TRUE
3397	else
3398	set RIGHT_SIZE = FALSE
3399	endif
3400	else
3401	set RIGHT_SIZE = FALSE
3402	endif
3403
3404	# 1p vs Num_Procs MPI
3405
3406	rm fort.88 fort.98 >& /dev/null
3407	if ( ( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_1p ) && \
3408	( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_${Num_Procs}p ) && \
3409	( $RIGHT_SIZE == TRUE ) ) then
3410	$DIFFWRF $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_1p \
3411	$TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3]_${Num_Procs}p >& /dev/null
3412	else
3413	touch fort.88 fort.98
3414	endif
3415	if ( ! -e fort.88 ) then
3416	echo "SUMMARY 1 vs $Num_Procs MPI for $core physics $phys_option $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
3417	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3418	else
3419	echo "SUMMARY 1 vs $Num_Procs MPI for $core physics $phys_option $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3420	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3421	endif
3422
3423	popd
3424
3425	else if ( ${#COMPOPTS} != 1 ) then
3426
3427	# If there is only a single parallel option, then we are just trying to
3428	# build the serial code. That implies no comparisons are needed.
3429
3430	# All of the forecasts for this set of physics and core have been
3431	# generated. We now compare the WRF model output files to see
3432	# if they are S^2D^2.
3433
3434	pushd ${DEF_DIR}/regression_test/WRFV3/test/$core
3435	set DIFFWRF = ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf
3436
3437	# Are we skipping the OpenMP runs?
3438
3439	if ( $ZAP_OPENMP == TRUE ) then
3440	goto BYPASS_OPENMP_SUMMARY1
3441	endif
3442
3443	# Are the files the same size? If not, then only the initial times
3444	# will be compared. That means, on a failure to run a forecast, the
3445	# diffwrf will give a pass. We need to root out this evil.
3446
3447	if ( ( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] ) && \
3448	( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[2] ) ) then
3449	set foo1 = ( ` \ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] `)
3450	set foo2 = ( ` \ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[2] `)
3451	set size1 = $foo1[6]
3452	set size2 = $foo2[6]
3453	if ( $size1 == $size2 ) then
3454	set RIGHT_SIZE_OMP = TRUE
3455	else
3456	set RIGHT_SIZE_OMP = FALSE
3457	endif
3458	else
3459	set RIGHT_SIZE_OMP = FALSE
3460	endif
3461
3462	BYPASS_OPENMP_SUMMARY1:
3463
3464	if ( ( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] ) && \
3465	( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3] ) ) then
3466	set foo1 = ( ` \ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] `)
3467	set foo3 = ( ` \ls -ls $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3] `)
3468	set size1 = $foo1[6]
3469	set size3 = $foo3[6]
3470	if ( $size1 == $size3 ) then
3471	set RIGHT_SIZE_MPI = TRUE
3472	else
3473	set RIGHT_SIZE_MPI = FALSE
3474	endif
3475	else
3476	set RIGHT_SIZE_MPI = FALSE
3477	endif
3478
3479	# Are we skipping the OpenMP runs?
3480
3481	if ( $ZAP_OPENMP == TRUE ) then
3482	goto BYPASS_OPENMP_SUMMARY2
3483	endif
3484
3485	# Serial vs OpenMP
3486
3487	rm fort.88 fort.98 >& /dev/null
3488	if ( ( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] ) && \
3489	( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[2] ) && \
3490	( $RIGHT_SIZE_OMP == TRUE ) ) then
3491	$DIFFWRF $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] \
3492	$TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[2] >& /dev/null
3493	else
3494	touch fort.88 fort.98
3495	endif
3496	if ( ! -e fort.88 ) then
3497	echo "SUMMARY serial vs OMP for $core physics $phys_option $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
3498	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3499	else
3500	echo "SUMMARY serial vs OMP for $core physics $phys_option $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3501	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3502	endif
3503
3504	BYPASS_OPENMP_SUMMARY2:
3505
3506	# Serial vs MPI
3507
3508	rm fort.88 fort.98 >& /dev/null
3509	if ( ( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] ) && \
3510	( -e $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3] ) && \
3511	( $RIGHT_SIZE_MPI == TRUE ) ) then
3512	$DIFFWRF $TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[1] \
3513	$TMPDIR/wrfout_d01_${filetag}.${core}.${phys_option}.$COMPOPTS[3] >& /dev/null
3514	else
3515	touch fort.88 fort.98
3516	endif
3517	if ( ! -e fort.88 ) then
3518	echo "SUMMARY serial vs MPI for $core physics $phys_option $esmf_lib_str PASS" >>! ${DEF_DIR}/wrftest.output
3519	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3520	else
3521	echo "SUMMARY serial vs MPI for $core physics $phys_option $esmf_lib_str FAIL" >>! ${DEF_DIR}/wrftest.output
3522	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3523	endif
3524
3525	popd
3526
3527	endif
3528
3529	# Generate and archive baseline or compare against baseline
3530
3531	if ( $core != nmm_real ) then
3532	if ( $GENERATE_BASELINE != FALSE ) then
3533	if ( ! -d $GENERATE_BASELINE ) then
3534	echo "ERROR: Baseline directory ${GENERATE_BASELINE} does not exist" >>! \
3535	${DEF_DIR}/wrftest.output
3536	exit ( 10 )
3537	else
3538	# Archive serial output file to baseline
3539	pushd ${DEF_DIR}/regression_test/WRFV3/test/$core
3540	set basefilenm = wrfout_d01_${filetag}.${core}.${phys_option}
3541	set basefile = ${GENERATE_BASELINE}/${basefilenm}
3542	set outfile = $TMPDIR/${basefilenm}.$COMPOPTS[1]
3543	if ( -e $outfile ) then
3544	cp $outfile $basefile \|\| \
3545	( echo "ERROR: cannot copy ${outfile} to ${basefile}" >>! \
3546	${DEF_DIR}/wrftest.output; exit 10 )
3547	else
3548	echo "ERROR: Cannot archive baseline, file $outfile does not exist" >>! \
3549	${DEF_DIR}/wrftest.output
3550	echo "SUMMARY baseline archived in ${GENERATE_BASELINE} for $core physics $phys_option FAIL" >>! \
3551	${DEF_DIR}/wrftest.output
3552	echo "-------------------------------------------------------------" >> \
3553	${DEF_DIR}/wrftest.output
3554	exit ( 10 )
3555	endif
3556	echo "SUMMARY baseline archived in ${GENERATE_BASELINE} for $core physics $phys_option PASS" >>! \
3557	${DEF_DIR}/wrftest.output
3558	echo "-------------------------------------------------------------" >> \
3559	${DEF_DIR}/wrftest.output
3560	popd
3561	endif
3562	endif
3563	if ( $COMPARE_BASELINE != FALSE ) then
3564	if ( ! -d $COMPARE_BASELINE ) then
3565	echo "${0}: ERROR:: Baseline directory ${COMPARE_BASELINE} does not exist" >>! \
3566	${DEF_DIR}/wrftest.output
3567	exit ( 10 )
3568	else
3569	# Compare against baseline output file
3570	set basefilenm = wrfout_d01_${filetag}.${core}.${phys_option}
3571	set basefile = ${COMPARE_BASELINE}/${basefilenm}
3572	set DIFFWRF = ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf
3573	set testdir = ${DEF_DIR}/regression_test/WRFV3/test/$core
3574	pushd ${testdir}
3575	foreach compopt ( $COMPOPTS )
3576	set cmpfile = $TMPDIR/${basefilenm}.$compopt
3577	rm fort.88 fort.98 >& /dev/null
3578	if ( ( -e ${basefile} ) && ( -e ${cmpfile} ) ) then
3579	# Are the files the same size? If not, then only the initial times
3580	# will be compared. That means, on a failure to run a forecast, the
3581	# diffwrf will give a pass. We need to root out this evil.
3582	set foob = ( ` \ls -ls ${basefile} `)
3583	set fooc = ( ` \ls -ls ${cmpfile} `)
3584	set sizeb = $foob[6]
3585	set sizec = $fooc[6]
3586	if ( $sizeb == $sizec ) then
3587	$DIFFWRF ${basefile} ${cmpfile} >& /dev/null
3588	if ( -e fort.88 ) then
3589	echo "FAIL: Baseline comparison, file ${cmpfile} did not match ${basefile} according to diffwrf" >>! \
3590	${DEF_DIR}/wrftest.output
3591	endif
3592	else
3593	touch fort.88 fort.98
3594	echo "FAIL: Baseline comparison, files ${cmpfile} and ${basefile} have different sizes" >>! \
3595	${DEF_DIR}/wrftest.output
3596	endif
3597	else
3598	echo "FAIL: Baseline comparison, either ${cmpfile} or ${basefile} does not exist" >>! \
3599	${DEF_DIR}/wrftest.output
3600	touch fort.88 fort.98
3601	endif
3602	if ( ! -e fort.88 ) then
3603	echo "SUMMARY compare vs baseline ${COMPARE_BASELINE} for $core physics $phys_option compopt $compopt $esmf_lib_str PASS" >>! \
3604	${DEF_DIR}/wrftest.output
3605	echo "-------------------------------------------------------------" >> \
3606	${DEF_DIR}/wrftest.output
3607	else
3608	echo "SUMMARY compare vs baseline ${COMPARE_BASELINE} for $core physics $phys_option compopt $compopt $esmf_lib_str FAIL" >>! \
3609	${DEF_DIR}/wrftest.output
3610	echo "-------------------------------------------------------------" >> \
3611	${DEF_DIR}/wrftest.output
3612	endif
3613	end
3614	popd
3615	endif
3616	endif
3617	else if ( $core == nmm_real ) then
3618	if ( $GENERATE_BASELINE != FALSE ) then
3619	if ( ! -d $GENERATE_BASELINE ) then
3620	echo "ERROR: Baseline directory ${GENERATE_BASELINE} does not exist" >>! \
3621	${DEF_DIR}/wrftest.output
3622	exit ( 10 )
3623	else
3624	# Archive serial output file to baseline
3625	pushd ${DEF_DIR}/regression_test/WRFV3/test/$core
3626	set basefilenm = wrfout_d01_${filetag}.${core}.${phys_option}
3627	set basefile = ${GENERATE_BASELINE}/${basefilenm}
3628	set outfile = $TMPDIR/${basefilenm}.$COMPOPTS[3]_1p
3629	if ( -e $outfile ) then
3630	cp $outfile $basefile \|\| \
3631	( echo "ERROR: cannot copy ${outfile} to ${basefile}" >>! \
3632	${DEF_DIR}/wrftest.output; exit 10 )
3633	else
3634	echo "ERROR: Cannot archive baseline, file $outfile does not exist" >>! \
3635	${DEF_DIR}/wrftest.output
3636	echo "SUMMARY baseline archived in ${GENERATE_BASELINE} for $core physics $phys_option FAIL" >>! \
3637	${DEF_DIR}/wrftest.output
3638	echo "-------------------------------------------------------------" >> \
3639	${DEF_DIR}/wrftest.output
3640	exit ( 10 )
3641	endif
3642	echo "SUMMARY baseline archived in ${GENERATE_BASELINE} for $core physics $phys_option PASS" >>! \
3643	${DEF_DIR}/wrftest.output
3644	echo "-------------------------------------------------------------" >> \
3645	${DEF_DIR}/wrftest.output
3646	popd
3647	endif
3648	endif
3649	if ( $COMPARE_BASELINE != FALSE ) then
3650	if ( ! -d $COMPARE_BASELINE ) then
3651	echo "${0}: ERROR:: Baseline directory ${COMPARE_BASELINE} does not exist" >>! \
3652	${DEF_DIR}/wrftest.output
3653	exit ( 10 )
3654	else
3655	# Compare against baseline output file
3656	set basefilenm = wrfout_d01_${filetag}.${core}.${phys_option}
3657	set basefile = ${COMPARE_BASELINE}/${basefilenm}
3658	set DIFFWRF = ${DEF_DIR}/regression_test/WRFV3/external/$IO_FORM_NAME[$IO_FORM]/diffwrf
3659	set testdir = ${DEF_DIR}/regression_test/WRFV3/test/$core
3660	pushd ${testdir}
3661	set compopt = $COMPOPTS[3]
3662	foreach proc ( 1p 4p )
3663	set cmpfile = $TMPDIR/${basefilenm}.${compopt}_${proc}
3664	rm fort.88 fort.98 >& /dev/null
3665	if ( ( -e ${basefile} ) && ( -e ${cmpfile} ) ) then
3666	# Are the files the same size? If not, then only the initial times
3667	# will be compared. That means, on a failure to run a forecast, the
3668	# diffwrf will give a pass. We need to root out this evil.
3669	set foob = ( ` \ls -ls ${basefile} `)
3670	set fooc = ( ` \ls -ls ${cmpfile} `)
3671	set sizeb = $foob[6]
3672	set sizec = $fooc[6]
3673	if ( $sizeb == $sizec ) then
3674	$DIFFWRF ${basefile} ${cmpfile} >& /dev/null
3675	if ( -e fort.88 ) then
3676	echo "FAIL: Baseline comparison, file ${cmpfile} did not match ${basefile} according to diffwrf" >>! \
3677	${DEF_DIR}/wrftest.output
3678	endif
3679	else
3680	touch fort.88 fort.98
3681	echo "FAIL: Baseline comparison, files ${cmpfile} and ${basefile} have different sizes" >>! \
3682	${DEF_DIR}/wrftest.output
3683	endif
3684	else
3685	echo "FAIL: Baseline comparison, either ${cmpfile} or ${basefile} does not exist" >>! \
3686	${DEF_DIR}/wrftest.output
3687	touch fort.88 fort.98
3688	endif
3689	if ( ! -e fort.88 ) then
3690	echo "SUMMARY compare vs baseline ${COMPARE_BASELINE} for $core physics $phys_option compopt $compopt $esmf_lib_str PASS" >>! \
3691	${DEF_DIR}/wrftest.output
3692	echo "-------------------------------------------------------------" >> \
3693	${DEF_DIR}/wrftest.output
3694	else
3695	echo "SUMMARY compare vs baseline ${COMPARE_BASELINE} for $core physics $phys_option compopt $compopt $esmf_lib_str FAIL" >>! \
3696	${DEF_DIR}/wrftest.output
3697	echo "-------------------------------------------------------------" >> \
3698	${DEF_DIR}/wrftest.output
3699	endif
3700	end
3701	popd
3702	endif
3703	endif
3704	goto ALL_SHE_WROTE_FOR_NMM
3705	endif
3706	# End of generate and archive baseline or compare against baseline
3707
3708	endif
3709
3710	BOTTOM_OF_PHYSICS_LOOP:
3711
3712	end
3713
3714	ALL_SHE_WROTE_FOR_NMM:
3715
3716	echo "-------------------------------------------------------------" >> ${DEF_DIR}/wrftest.output
3717
3718	if ( $clrm ) then
3719	popd
3720	endif
3721
3722	end
3723
3724
3725	# How long did this take.
3726
3727	set end = ( `date` )
3728	echo "Start WRF Regression: $start " >> ${DEF_DIR}/wrftest.output
3729	echo "End WRF Regression: $end " >> ${DEF_DIR}/wrftest.output
3730
3731	# We have done all of the tests, and placed the PASS FAIL labels in the
3732	# output file. If there are any FAIL messages, we are in trouble.
3733
3734	grep FAIL ${DEF_DIR}/wrftest.output
3735	set ok = $status
3736
3737	# Send email of the status.
3738
3739	if ( $ok == 0 ) then
3740	$MAIL -s "REGRESSION FAILURE $ARCH[1] " $FAIL_MAIL < ${DEF_DIR}/wrftest.output
3741	else
3742	$MAIL -s "REGRESSION SUCCESS $ARCH[1] " $GOOD_MAIL < ${DEF_DIR}/wrftest.output
3743	endif
3744
3745	# Clean left up detritus
3746
3747	cd $CUR_DIR
3748
3749	rm -rf damp_*eal >& /dev/null
3750	rm -rf dom_*eal >& /dev/null
3751	rm -rf phys_real_* >& /dev/null
3752	rm -rf nest_real_* >& /dev/null
3753	rm -rf phys_quarter_* >& /dev/null
3754	rm -rf phys_b_wave_* >& /dev/null
3755	rm -rf version_info >& /dev/null
3756	rm -rf machfile >& /dev/null
3757	rm -rf fdda_real* >& /dev/null
3758	rm -rf time_real_* >& /dev/null
3759	rm -rf dyn_real_* >& /dev/null
3760	rm -rf damp_* >& /dev/null
3761	rm -rf io_format >& /dev/null

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: lmdz_wrf/WRFV3/tools/regtest_hwrf.csh @ 1

Download in other formats: