source: lmdz_wrf/WRFV3/external/io_grib2/g2lib/addgrid.F @ 1

      subroutine addgrid(cgrib,lcgrib,igds,igdstmpl,igdstmplen,
     &                   ideflist,idefnum,ierr)
!$$$  SUBPROGRAM DOCUMENTATION BLOCK
!                .      .    .                                       .
! SUBPROGRAM:    addgrid 
!   PRGMMR: Gilbert         ORG: W/NP11    DATE: 2000-05-01
!
! ABSTRACT: This subroutine packs up a Grid Definition Section (Section 3) 
!   and adds it to a GRIB2 message.
!   This routine is used with routines "gribcreate", "addlocal", "addfield",
!   and "gribend" to create a complete GRIB2 message.  Subroutine
!   gribcreate must be called first to initialize a new GRIB2 message.
!
! PROGRAM HISTORY LOG:
! 2000-05-01  Gilbert
!
! USAGE:    CALL addgrid(cgrib,lcgrib,igds,igdstmpl,igdstmplen,
!                        ideflist,idefnum,ierr)
!   INPUT ARGUMENT LIST:
!     cgrib    - Character array to contain the GRIB2 message
!     lcgrib   - Maximum length (bytes) of array cgrib.
!     igds     - Contains information needed for GRIB Grid Definition Section 3.
!                Must be dimensioned >= 5.
!                igds(1)=Source of grid definition (see Code Table 3.0)
!                igds(2)=Number of grid points in the defined grid.
!                igds(3)=Number of octets needed for each 
!                            additional grid points definition.  
!                            Used to define number of
!                            points in each row ( or column ) for
!                            non-regular grids.  
!                            = 0, if using regular grid.
!                igds(4)=Interpretation of list for optional points 
!                            definition.  (Code Table 3.11)
!                igds(5)=Grid Definition Template Number (Code Table 3.1)
!     igdstmpl - Contains the data values for the specified Grid Definition
!                Template ( NN=igds(5) ).  Each element of this integer 
!                array contains an entry (in the order specified) of Grid
!                Defintion Template 3.NN
!   igdstmplen - Max dimension of igdstmpl()
!     ideflist - (Used if igds(3) .ne. 0)  This array contains the
!                number of grid points contained in each row ( or column )
!      idefnum - (Used if igds(3) .ne. 0)  The number of entries
!                in array ideflist.  i.e. number of rows ( or columns )
!                for which optional grid points are defined.
!
!   OUTPUT ARGUMENT LIST:      
!     cgrib    - Character array to contain the GRIB2 message
!     ierr     - Error return code.
!                0 = no error
!                1 = GRIB message was not initialized.  Need to call
!                    routine gribcreate first.
!                2 = GRIB message already complete.  Cannot add new section.
!                3 = Sum of Section byte counts doesn't add to total byte count.
!                4 = Previous Section was not 1, 2 or 7.
!                5 = Could not find requested Grid Definition Template.
!
! REMARKS: Note that the Local Use Section ( Section 2 ) can only follow
!          Section 1 or Section 7 in a GRIB2 message.
!
! ATTRIBUTES:
!   LANGUAGE: Fortran 90
!   MACHINE:  IBM SP
!
!$$$

      use gridtemplates

      character(len=1),intent(inout) :: cgrib(lcgrib)
      integer,intent(in) :: igds(*),igdstmpl(*),ideflist(idefnum)
      integer,intent(in) :: lcgrib,idefnum,igdstmplen
      integer,intent(out) :: ierr
      
      character(len=4),parameter :: grib='GRIB',c7777='7777'
      character(len=4):: ctemp
      integer:: mapgrid(igdstmplen)
      integer,parameter :: one=1,three=3
      integer lensec3,iofst,ibeg,lencurr,len,mapgridlen
      logical needext
 
      ierr=0
!
!  Check to see if beginning of GRIB message exists
!
      ctemp=cgrib(1)//cgrib(2)//cgrib(3)//cgrib(4)
      if ( ctemp.ne.grib ) then
        print *,'addgrid: GRIB not found in given message.'
        print *,'addgrid: Call to routine gribcreate required',
     &          ' to initialize GRIB messge.'
        ierr=1
        return
      endif
!
!  Get current length of GRIB message
!  
      call g2lib_gbyte(cgrib,lencurr,96,32)
!
!  Check to see if GRIB message is already complete
!  
      ctemp=cgrib(lencurr-3)//cgrib(lencurr-2)//cgrib(lencurr-1)
     &      //cgrib(lencurr)
      if ( ctemp.eq.c7777 ) then
        print *,'addgrid: GRIB message already complete.  Cannot',
     &          ' add new section.'
        ierr=2
        return
      endif
!
!  Loop through all current sections of the GRIB message to
!  find the last section number.
!
      len=16    ! length of Section 0
      do 
      !    Get section number and length of next section
        iofst=len*8
        call g2lib_gbyte(cgrib,ilen,iofst,32)
        iofst=iofst+32
        call g2lib_gbyte(cgrib,isecnum,iofst,8)
        len=len+ilen
      !    Exit loop if last section reached
        if ( len.eq.lencurr ) exit
      !    If byte count for each section doesn't match current
      !    total length, then there is a problem.
        if ( len.gt.lencurr ) then
          print *,'addgrid: Section byte counts don''t add to total.'
          print *,'addgrid: Sum of section byte counts = ',len
          print *,'addgrid: Total byte count in Section 0 = ',lencurr
          ierr=3
          return
        endif
      enddo
!
!  Section 3 can only be added after sections 1, 2 and 7.
!
      if ( (isecnum.ne.1) .and. (isecnum.ne.2) .and. 
     &     (isecnum.ne.7) ) then
        print *,'addgrid: Section 3 can only be added after Section',
     &          ' 1, 2 or 7.'
        print *,'addgrid: Section ',isecnum,' was the last found in',
     &          ' given GRIB message.'
        ierr=4
        return
      endif
!
!  Add Section 3  - Grid Definition Section
!
      ibeg=lencurr*8        !   Calculate offset for beginning of section 3
      iofst=ibeg+32         !   leave space for length of section
      call g2lib_sbyte(cgrib,three,iofst,8)     ! Store section number ( 3 )
      iofst=iofst+8
      call g2lib_sbyte(cgrib,igds(1),iofst,8)     ! Store source of Grid def.
      iofst=iofst+8
      call g2lib_sbyte(cgrib,igds(2),iofst,32)    ! Store number of data pts.
      iofst=iofst+32
      call g2lib_sbyte(cgrib,igds(3),iofst,8)     ! Store number of extra octets.
      iofst=iofst+8
      call g2lib_sbyte(cgrib,igds(4),iofst,8)     ! Store interp. of extra octets.
      iofst=iofst+8
      !   if Octet 6 is not equal to zero, Grid Definition Template may
      !   not be supplied.
      if ( igds(1).eq.0 ) then
        call g2lib_sbyte(cgrib,igds(5),iofst,16)  ! Store Grid Def Template num.
      else
        call g2lib_sbyte(cgrib,65535,iofst,16)   ! Store missing value as Grid Def Template num.
      endif
      iofst=iofst+16
      !
      !   Get Grid Definition Template
      !
      if (igds(1).eq.0) then
        call getgridtemplate(igds(5),mapgridlen,mapgrid,needext,
     &                       iret)
        if (iret.ne.0) then
          ierr=5
          return
        endif
        !
        !   Extend the Grid Definition Template, if necessary.
        !   The number of values in a specific template may vary
        !   depending on data specified in the "static" part of the
        !   template.
        !
        if ( needext ) then
          call extgridtemplate(igds(5),igdstmpl,mapgridlen,mapgrid)
        endif
      else
        mapgridlen=0
      endif
      !
      !   Pack up each input value in array igdstmpl into the
      !   the appropriate number of octets, which are specified in
      !   corresponding entries in array mapgrid.
      !
      do i=1,mapgridlen
        nbits=iabs(mapgrid(i))*8
        if ( (mapgrid(i).ge.0).or.(igdstmpl(i).ge.0) ) then
          call g2lib_sbyte(cgrib,igdstmpl(i),iofst,nbits)
        else
          call g2lib_sbyte(cgrib,one,iofst,1)
          call g2lib_sbyte(cgrib,iabs(igdstmpl(i)),iofst+1,nbits-1)
        endif
        iofst=iofst+nbits
      enddo
      !
      !   If requested,
      !   Insert optional list of numbers defining number of points
      !   in each row or column.  This is used for non regular
      !   grids.
      !
      if ( igds(3).ne.0 ) then
         nbits=igds(3)*8
         call g2lib_sbytes(cgrib,ideflist,iofst,nbits,0,idefnum)
         iofst=iofst+(nbits*idefnum)
      endif
      !
      !   Calculate length of section 3 and store it in octets
      !   1-4 of section 3.
      !
      lensec3=(iofst-ibeg)/8
      call g2lib_sbyte(cgrib,lensec3,ibeg,32)

!
!  Update current byte total of message in Section 0
!
      call g2lib_sbyte(cgrib,lencurr+lensec3,96,32)

      return
      end