source: lmdz_wrf/WRFV3/external/io_grib2/g2lib/addfield.F @ 1

      subroutine addfield(cgrib,lcgrib,ipdsnum,ipdstmpl,ipdstmplen,
     &                    coordlist,numcoord,idrsnum,idrstmpl,
     &                    idrstmplen,fld,ngrdpts,ibmap,bmap,ierr)
!$$$  SUBPROGRAM DOCUMENTATION BLOCK
!                .      .    .                                       .
! SUBPROGRAM:    addfield 
!   PRGMMR: Gilbert         ORG: W/NP11    DATE: 2000-05-02
!
! ABSTRACT: This subroutine packs up Sections 4 through 7 for a given field
!   and adds them to a GRIB2 message.  They are Product Definition Section,
!   Data Representation Section, Bit-Map Section and Data Section, 
!   respectively.
!   This routine is used with routines "gribcreate", "addlocal", "addgrid",
!   and "gribend" to create a complete GRIB2 message.  Subroutine
!   gribcreate must be called first to initialize a new GRIB2 message.
!   Also, subroutine addgrid must be called after gribcreate and
!   before this routine to add the appropriate grid description to
!   the GRIB2 message.   Also, a call to gribend is required to complete 
!   GRIB2 message after all fields have been added.
!
! PROGRAM HISTORY LOG:
! 2000-05-02  Gilbert
! 2002-12-17  Gilbert  - Added support for new templates using
!                        PNG and JPEG2000 algorithms/templates.
! 2004-06-22  Gilbert  - Added check to determine if packing algorithm failed.
!
! USAGE:    CALL addfield(cgrib,lcgrib,ipdsnum,ipdstmpl,ipdstmplen,
!                         coordlist,numcoord,idrsnum,idrstmpl,
!                         idrstmplen,fld,ngrdpts,ibmap,bmap,ierr)
!   INPUT ARGUMENT LIST:
!     cgrib    - Character array to contain the GRIB2 message
!     lcgrib   - Maximum length (bytes) of array cgrib.
!     ipdsnum  - Product Definition Template Number ( see Code Table 4.0)
!     ipdstmpl - Contains the data values for the specified Product Definition
!                Template ( N=ipdsnum ).  Each element of this integer 
!                array contains an entry (in the order specified) of Product
!                Defintion Template 4.N
!   ipdstmplen - Max dimension of ipdstmpl()
!     coordlist- Array containg floating point values intended to document
!                the vertical discretisation associated to model data
!                on hybrid coordinate vertical levels.
!     numcoord - number of values in array coordlist.
!     idrsnum  - Data Representation Template Number ( see Code Table 5.0 )
!     idrstmpl - Contains the data values for the specified Data Representation
!                Template ( N=idrsnum ).  Each element of this integer 
!                array contains an entry (in the order specified) of Data
!                Representation Template 5.N
!                Note that some values in this template (eg. reference
!                values, number of bits, etc...) may be changed by the
!                data packing algorithms.
!                Use this to specify scaling factors and order of
!                spatial differencing, if desired.
!   idrstmplen - Max dimension of idrstmpl()
!     fld()    - Array of data points to pack.
!     ngrdpts  - Number of data points in grid.
!                i.e.  size of fld and bmap.
!     ibmap    - Bitmap indicator ( see Code Table 6.0 )
!                0 = bitmap applies and is included in Section 6.
!                1-253 = Predefined bitmap applies
!                254 = Previously defined bitmap applies to this field
!                255 = Bit map does not apply to this product.
!     bmap()   - Logical*1 array containing bitmap to be added. 
!                ( if ibmap=0 or ibmap=254)
!
!   OUTPUT ARGUMENT LIST:      
!     cgrib    - Character array to contain the GRIB2 message
!     ierr     - Error return code.
!                0 = no error
!                1 = GRIB message was not initialized.  Need to call
!                    routine gribcreate first.
!                2 = GRIB message already complete.  Cannot add new section.
!                3 = Sum of Section byte counts does not add to total 
!                    byte count.
!                4 = Previous Section was not 3 or 7.
!                5 = Could not find requested Product Definition Template.
!                6 = Section 3 (GDS) not previously defined in message
!                7 = Tried to use unsupported Data Representationi Template
!                8 = Specified use of a previously defined bitmap, but one
!                    does not exist in the GRIB message.
!                9 = GDT of one of 5.50 through 5.53 required to pack
!                    using DRT 5.51
!               10 = Error packing data field.
!
! REMARKS: Note that the Local Use Section ( Section 2 ) can only follow
!          Section 1 or Section 7 in a GRIB2 message.
!
! ATTRIBUTES:
!   LANGUAGE: Fortran 90
!   MACHINE:  IBM SP
!
!$$$

      use pdstemplates
      use drstemplates

      character(len=1),intent(inout) :: cgrib(lcgrib)
      integer,intent(in) :: ipdsnum,ipdstmpl(*)
      integer,intent(in) :: idrsnum,numcoord,ipdstmplen,idrstmplen
      integer,intent(in) :: lcgrib,ngrdpts,ibmap
      real,intent(in) :: coordlist(numcoord)
      real,target,intent(in) :: fld(ngrdpts)
      integer,intent(out) :: ierr
      integer,intent(inout) :: idrstmpl(*)
      logical*1,intent(in) :: bmap(ngrdpts)
      
      character(len=4),parameter :: grib='GRIB',c7777='7777'
      character(len=4):: ctemp
      character(len=1),allocatable :: cpack(:)
      real,pointer,dimension(:) :: pfld
      real(4) :: coordieee(numcoord),re00
      integer(4) :: ire00,allones
      integer :: mappds(ipdstmplen),intbmap(ngrdpts),mapdrs(idrstmplen)
      integer,parameter :: zero=0,one=1,four=4,five=5,six=6,seven=7
      integer,parameter :: minsize=50000
      integer iofst,ibeg,lencurr,len,mappdslen,mapdrslen,lpos3
      integer width,height,ndpts
      integer lensec3,lensec4,lensec5,lensec6,lensec7
      logical issec3,needext,isprevbmap
 
      ierr=0
      do jj=0,31
         allones=ibset(allones,jj)
      enddo
!
!  Check to see if beginning of GRIB message exists
!
      ctemp=cgrib(1)//cgrib(2)//cgrib(3)//cgrib(4)
      if ( ctemp.ne.grib ) then
        print *,'addfield: GRIB not found in given message.'
        print *,'addfield: Call to routine gribcreate required',
     &          ' to initialize GRIB messge.'
        ierr=1
        return
      endif
!
!  Get current length of GRIB message
!  
      call g2lib_gbyte(cgrib,lencurr,96,32)
!
!  Check to see if GRIB message is already complete
!  
      ctemp=cgrib(lencurr-3)//cgrib(lencurr-2)//cgrib(lencurr-1)
     &      //cgrib(lencurr)
      if ( ctemp.eq.c7777 ) then
        print *,'addfield: GRIB message already complete.  Cannot',
     &          ' add new section.'
        ierr=2
        return
      endif
!
!  Loop through all current sections of the GRIB message to
!  find the last section number.
!
      issec3=.false.
      isprevbmap=.false.
      len=16    ! length of Section 0
      do 
      !    Get number and length of next section
        iofst=len*8
        call g2lib_gbyte(cgrib,ilen,iofst,32)
        iofst=iofst+32
        call g2lib_gbyte(cgrib,isecnum,iofst,8)
        iofst=iofst+8
      !  Check if previous Section 3 exists and save location of
      !  the section 3 in case needed later.
        if (isecnum.eq.3) then
           issec3=.true.
           lpos3=len+1
           lensec3=ilen
        endif
      !  Check if a previous defined bitmap exists
        if (isecnum.eq.6) then
          call g2lib_gbyte(cgrib,ibmprev,iofst,8)
          iofst=iofst+8
          if ((ibmprev.ge.0).and.(ibmprev.le.253)) isprevbmap=.true.
        endif
        len=len+ilen
      !    Exit loop if last section reached
        if ( len.eq.lencurr ) exit
      !    If byte count for each section does not match current
      !    total length, then there is a problem.
        if ( len.gt.lencurr ) then
          print *,'addfield: Section byte counts don''t add to total.'
          print *,'addfield: Sum of section byte counts = ',len
          print *,'addfield: Total byte count in Section 0 = ',lencurr
          ierr=3
          return
        endif
      enddo
!
!  Sections 4 through 7 can only be added after section 3 or 7.
!
      if ( (isecnum.ne.3) .and. (isecnum.ne.7) ) then
        print *,'addfield: Sections 4-7 can only be added after',
     &          ' Section 3 or 7.'
        print *,'addfield: Section ',isecnum,' was the last found in',
     &          ' given GRIB message.'
        ierr=4
        return
!
!  Sections 4 through 7 can only be added if section 3 was previously defined.
!
      elseif (.not.issec3) then
        print *,'addfield: Sections 4-7 can only be added if Section',
     &          ' 3 was previously included.'
        print *,'addfield: Section 3 was not found in',
     &          ' given GRIB message.'
        print *,'addfield: Call to routine addgrid required',
     &          ' to specify Grid definition.'
        ierr=6
        return
      endif
!
!  Add Section 4  - Product Definition Section
!
      ibeg=lencurr*8        !   Calculate offset for beginning of section 4
      iofst=ibeg+32         !   leave space for length of section
      call g2lib_sbyte(cgrib,four,iofst,8)     ! Store section number ( 4 )
      iofst=iofst+8
      call g2lib_sbyte(cgrib,numcoord,iofst,16)   ! Store num of coordinate values
      iofst=iofst+16
      call g2lib_sbyte(cgrib,ipdsnum,iofst,16)    ! Store Prod Def Template num.
      iofst=iofst+16
      !
      !   Get Product Definition Template
      !
      call getpdstemplate(ipdsnum,mappdslen,mappds,needext,iret)
      if (iret.ne.0) then
        ierr=5
        return
      endif
      !
      !   Extend the Product Definition Template, if necessary.
      !   The number of values in a specific template may vary
      !   depending on data specified in the "static" part of the
      !   template.
      !
      if ( needext ) then
        call extpdstemplate(ipdsnum,ipdstmpl,mappdslen,mappds)
      endif
      !
      !   Pack up each input value in array ipdstmpl into the
      !   the appropriate number of octets, which are specified in
      !   corresponding entries in array mappds.
      !
      do i=1,mappdslen
        nbits=iabs(mappds(i))*8
        if ( (mappds(i).ge.0).or.(ipdstmpl(i).ge.0) ) then
          call g2lib_sbyte(cgrib,ipdstmpl(i),iofst,nbits)
        else
          call g2lib_sbyte(cgrib,one,iofst,1)
          call g2lib_sbyte(cgrib,iabs(ipdstmpl(i)),iofst+1,nbits-1)
        endif
        iofst=iofst+nbits
      enddo
      !
      !   Add Optional list of vertical coordinate values
      !   after the Product Definition Template, if necessary.
      !
      if ( numcoord .ne. 0 ) then
        call mkieee(coordlist,coordieee,numcoord)
        call g2lib_sbytes(cgrib,coordieee,iofst,32,0,numcoord)
        iofst=iofst+(32*numcoord)
      endif
      !
      !   Calculate length of section 4 and store it in octets
      !   1-4 of section 4.
      !
      lensec4=(iofst-ibeg)/8
      call g2lib_sbyte(cgrib,lensec4,ibeg,32)
!
!  Pack Data using appropriate algorithm
!
      !
      !   Get Data Representation Template
      !
      call getdrstemplate(idrsnum,mapdrslen,mapdrs,needext,iret)
      if (iret.ne.0) then
        ierr=5
        return
      endif
      !
      !  contract data field, removing data at invalid grid points,
      !  if bit-map is provided with field.
      !
      if ( ibmap.eq.0 .OR. ibmap.eq.254 ) then
         allocate(pfld(ngrdpts))
         ndpts=0;
         do jj=1,ngrdpts
             intbmap(jj)=0
             if ( bmap(jj) ) then
                intbmap(jj)=1
                ndpts=ndpts+1
                pfld(ndpts)=fld(jj);
             endif
         enddo
      else 
         ndpts=ngrdpts;
         pfld=>fld;
      endif
      lcpack=0
      nsize=ndpts*4
      if (nsize .lt. minsize) nsize=minsize
      allocate(cpack(nsize),stat=istat)
      if (idrsnum.eq.0) then      !  Simple Packing
        call simpack(pfld,ndpts,idrstmpl,cpack,lcpack)
      elseif (idrsnum.eq.2.or.idrsnum.eq.3) then      !  Complex Packing
        call cmplxpack(pfld,ndpts,idrsnum,idrstmpl,cpack,lcpack)
      elseif (idrsnum.eq.50) then      !  Sperical Harmonic Simple Packing
        call simpack(pfld(2),ndpts-1,idrstmpl,cpack,lcpack)
        call mkieee(real(pfld(1)),re00,1)  ! ensure RE(0,0) value is IEEE format
        !call g2lib_gbyte(re00,idrstmpl(5),0,32)
        ire00=transfer(re00,ire00)
        idrstmpl(5)=ire00
      elseif (idrsnum.eq.51) then      !  Sperical Harmonic Complex Packing
           call getpoly(cgrib(lpos3),lensec3,jj,kk,mm)
           if (jj.ne.0 .AND. kk.ne.0 .AND. mm.ne.0) then
             call specpack(pfld,ndpts,jj,kk,mm,idrstmpl,cpack,lcpack)
           else
             print *,'addfield: Cannot pack DRT 5.51.'
             ierr=9
             return
           endif
#ifdef USE_JPEG2000
      elseif (idrsnum.eq.40 .OR. idrsnum.eq.40000) then     !  JPEG2000 encoding
        if (ibmap.eq.255) then
           call getdim(cgrib(lpos3),lensec3,width,height,iscan)
           if ( width.eq.0 .OR. height.eq.0 ) then
              width=ndpts
              height=1
           elseif ( width.eq.allones .OR. height.eq.allones ) then
              width=ndpts
              height=1
           elseif ( ibits(iscan,5,1) .eq. 1) then   ! Scanning mode: bit 3
              itemp=width
              width=height
              height=itemp
           endif
        else
           width=ndpts
           height=1
        endif
        lcpack=nsize
        call jpcpack(pfld,width,height,idrstmpl,cpack,lcpack,ierr)
#endif  /* USE_JPEG2000 */
#ifdef USE_PNG
      elseif (idrsnum.eq.41 .OR. idrsnum.eq.40010) then      !  PNG encoding
        if (ibmap.eq.255) then
           call getdim(cgrib(lpos3),lensec3,width,height,iscan)
           if ( width.eq.0 .OR. height.eq.0 ) then
              width=ndpts
              height=1
           elseif ( width.eq.allones .OR. height.eq.allones ) then
              width=ndpts
              height=1
           elseif ( ibits(iscan,5,1) .eq. 1) then   ! Scanning mode: bit 3
              itemp=width
              width=height
              height=itemp
           endif
        else
           width=ndpts
           height=1
        endif
        call pngpack(pfld,width,height,idrstmpl,cpack,lcpack)
#endif   /* USE_PNG */
      else
        print *,'addfield: Data Representation Template 5.',idrsnum,
     *          ' not yet implemented.'
        ierr=7
        return
      endif
      if ( ibmap.eq.0 .OR. ibmap.eq.254 ) then
         deallocate(pfld)
      endif
      if ( lcpack .lt. 0 ) then
        if( allocated(cpack) )deallocate(cpack)
        ierr=10
        return
      endif

!
!  Add Section 5  - Data Representation Section
!
      ibeg=iofst            !   Calculate offset for beginning of section 5
      iofst=ibeg+32         !   leave space for length of section
      call g2lib_sbyte(cgrib,five,iofst,8)     ! Store section number ( 5 )
      iofst=iofst+8
      call g2lib_sbyte(cgrib,ndpts,iofst,32)    ! Store num of actual data points
      iofst=iofst+32
      call g2lib_sbyte(cgrib,idrsnum,iofst,16)    ! Store Data Repr. Template num.
      iofst=iofst+16
      !
      !   Pack up each input value in array idrstmpl into the
      !   the appropriate number of octets, which are specified in
      !   corresponding entries in array mapdrs.
      !
      do i=1,mapdrslen
        nbits=iabs(mapdrs(i))*8
        if ( (mapdrs(i).ge.0).or.(idrstmpl(i).ge.0) ) then
          call g2lib_sbyte(cgrib,idrstmpl(i),iofst,nbits)
        else
          call g2lib_sbyte(cgrib,one,iofst,1)
          call g2lib_sbyte(cgrib,iabs(idrstmpl(i)),iofst+1,nbits-1)
        endif
        iofst=iofst+nbits
      enddo
      !
      !   Calculate length of section 5 and store it in octets
      !   1-4 of section 5.
      !
      lensec5=(iofst-ibeg)/8
      call g2lib_sbyte(cgrib,lensec5,ibeg,32)

!
!  Add Section 6  - Bit-Map Section
!
      ibeg=iofst            !   Calculate offset for beginning of section 6
      iofst=ibeg+32         !   leave space for length of section
      call g2lib_sbyte(cgrib,six,iofst,8)     ! Store section number ( 6 )
      iofst=iofst+8
      call g2lib_sbyte(cgrib,ibmap,iofst,8)    ! Store Bit Map indicator
      iofst=iofst+8
      !
      !  Store bitmap, if supplied
      !
      if (ibmap.eq.0) then
        call g2lib_sbytes(cgrib,intbmap,iofst,1,0,ngrdpts)    ! Store BitMap
        iofst=iofst+ngrdpts
      endif
      !
      !  If specifying a previously defined bit-map, make sure
      !  one already exists in the current GRIB message.
      !
      if ((ibmap.eq.254).and.(.not.isprevbmap)) then
        print *,'addfield: Requested previously defined bitmap, ',
     &        ' but one does not exist in the current GRIB message.'
        ierr=8
        return
      endif
      !
      !   Calculate length of section 6 and store it in octets
      !   1-4 of section 6.  Pad to end of octect, if necessary.
      !
      left=8-mod(iofst,8)
      if (left.ne.8) then
        call g2lib_sbyte(cgrib,zero,iofst,left)     ! Pad with zeros to fill Octet
        iofst=iofst+left
      endif
      lensec6=(iofst-ibeg)/8
      call g2lib_sbyte(cgrib,lensec6,ibeg,32)

!
!  Add Section 7  - Data Section
!
      ibeg=iofst            !   Calculate offset for beginning of section 7
      iofst=ibeg+32         !   leave space for length of section
      call g2lib_sbyte(cgrib,seven,iofst,8)     ! Store section number ( 7 )
      iofst=iofst+8
      !      Store Packed Binary Data values, if non-constant field
      if (lcpack.ne.0) then
        ioctet=iofst/8           
        cgrib(ioctet+1:ioctet+lcpack)=cpack(1:lcpack)
        iofst=iofst+(8*lcpack)
      endif
      !
      !   Calculate length of section 7 and store it in octets
      !   1-4 of section 7.  
      !
      lensec7=(iofst-ibeg)/8
      call g2lib_sbyte(cgrib,lensec7,ibeg,32)

      if( allocated(cpack) )deallocate(cpack)
!
!  Update current byte total of message in Section 0
!
      newlen=lencurr+lensec4+lensec5+lensec6+lensec7
      call g2lib_sbyte(cgrib,newlen,96,32)

      return
      end