! $Id: cv3_routines.F90 4368 2022-12-05 23:01:16Z evignon $ SUBROUTINE cv3_param(nd, k_upper, delt) USE ioipsl_getin_p_mod, ONLY : getin_p use mod_phys_lmdz_para IMPLICIT NONE !------------------------------------------------------------ !Set parameters for convectL for iflag_con = 3 !------------------------------------------------------------ !*** PBCRIT IS THE CRITICAL CLOUD DEPTH (MB) BENEATH WHICH THE *** !*** PRECIPITATION EFFICIENCY IS ASSUMED TO BE ZERO *** !*** PTCRIT IS THE CLOUD DEPTH (MB) ABOVE WHICH THE PRECIP. *** !*** EFFICIENCY IS ASSUMED TO BE UNITY *** !*** SIGD IS THE FRACTIONAL AREA COVERED BY UNSATURATED DNDRAFT *** !*** SPFAC IS THE FRACTION OF PRECIPITATION FALLING OUTSIDE *** !*** OF CLOUD *** ![TAU: CHARACTERISTIC TIMESCALE USED TO COMPUTE ALPHA & BETA] !*** ALPHA AND BETA ARE PARAMETERS THAT CONTROL THE RATE OF *** !*** APPROACH TO QUASI-EQUILIBRIUM *** !*** (THEIR STANDARD VALUES ARE 1.0 AND 0.96, RESPECTIVELY) *** !*** (BETA MUST BE LESS THAN OR EQUAL TO 1) *** !*** DTCRIT IS THE CRITICAL BUOYANCY (K) USED TO ADJUST THE *** !*** APPROACH TO QUASI-EQUILIBRIUM *** !*** IT MUST BE LESS THAN 0 *** include "cv3param.h" include "cvflag.h" include "conema3.h" INTEGER, INTENT(IN) :: nd INTEGER, INTENT(IN) :: k_upper REAL, INTENT(IN) :: delt ! timestep (seconds) ! Local variables CHARACTER (LEN=20) :: modname = 'cv3_param' CHARACTER (LEN=80) :: abort_message LOGICAL, SAVE :: first = .TRUE. !$OMP THREADPRIVATE(first) !glb noff: integer limit for convection (nd-noff) ! minorig: First level of convection ! -- limit levels for convection: !jyg< ! noff is chosen such that nl = k_upper so that upmost loops end at about 22 km ! noff = min(max(nd-k_upper, 1), (nd+1)/2) !! noff = 1 !>jyg minorig = 1 nl = nd - noff nlp = nl + 1 nlm = nl - 1 IF (first) THEN ! -- "microphysical" parameters: ! IM beg: ajout fis. reglage ep ! CR+JYG: shedding coefficient (used when iflag_mix_adiab=1) ! IM lu dans physiq.def via conf_phys.F90 epmax = 0.993 omtrain = 45.0 ! used also for snow (no disctinction rain/snow) ! -- misc: dtovsh = -0.2 ! dT for overshoot ! cc dttrig = 5. ! (loose) condition for triggering dttrig = 10. ! (loose) condition for triggering dtcrit = -2.0 ! -- end of convection ! -- interface cloud parameterization: delta = 0.01 ! cld ! -- interface with boundary-layer (gust factor): (sb) betad = 10.0 ! original value (from convect 4.3) ! Var interm pour le getin cv_flag_feed=1 CALL getin_p('cv_flag_feed',cv_flag_feed) T_top_max = 1000. CALL getin_p('t_top_max',T_top_max) dpbase=-40. CALL getin_p('dpbase',dpbase) pbcrit=150.0 CALL getin_p('pbcrit',pbcrit) ptcrit=500.0 CALL getin_p('ptcrit',ptcrit) sigdz=0.01 CALL getin_p('sigdz',sigdz) spfac=0.15 CALL getin_p('spfac',spfac) tau=8000. CALL getin_p('tau',tau) flag_wb=1 CALL getin_p('flag_wb',flag_wb) wbmax=6. CALL getin_p('wbmax',wbmax) ok_convstop=.False. CALL getin_p('ok_convstop',ok_convstop) tau_stop=15000. CALL getin_p('tau_stop',tau_stop) ok_intermittent=.False. CALL getin_p('ok_intermittent',ok_intermittent) ok_optim_yield=.False. CALL getin_p('ok_optim_yield',ok_optim_yield) ok_homo_tend=.TRUE. CALL getin_p('ok_homo_tend',ok_homo_tend) ok_entrain=.TRUE. CALL getin_p('ok_entrain',ok_entrain) coef_peel=0.25 CALL getin_p('coef_peel',coef_peel) flag_epKEorig=1 CALL getin_p('flag_epKEorig',flag_epKEorig) elcrit=0.0003 CALL getin_p('elcrit',elcrit) tlcrit=-55.0 CALL getin_p('tlcrit',tlcrit) ejectliq=0. CALL getin_p('ejectliq',ejectliq) ejectice=0. CALL getin_p('ejectice',ejectice) cvflag_prec_eject = .FALSE. CALL getin_p('cvflag_prec_eject',cvflag_prec_eject) qsat_depends_on_qt = .FALSE. CALL getin_p('qsat_depends_on_qt',qsat_depends_on_qt) adiab_ascent_mass_flux_depends_on_ejectliq = .FALSE. CALL getin_p('adiab_ascent_mass_flux_depends_on_ejectliq',adiab_ascent_mass_flux_depends_on_ejectliq) keepbug_ice_frac = .TRUE. CALL getin_p('keepbug_ice_frac', keepbug_ice_frac) WRITE (*, *) 't_top_max=', t_top_max WRITE (*, *) 'dpbase=', dpbase WRITE (*, *) 'pbcrit=', pbcrit WRITE (*, *) 'ptcrit=', ptcrit WRITE (*, *) 'sigdz=', sigdz WRITE (*, *) 'spfac=', spfac WRITE (*, *) 'tau=', tau WRITE (*, *) 'flag_wb=', flag_wb WRITE (*, *) 'wbmax=', wbmax WRITE (*, *) 'ok_convstop=', ok_convstop WRITE (*, *) 'tau_stop=', tau_stop WRITE (*, *) 'ok_intermittent=', ok_intermittent WRITE (*, *) 'ok_optim_yield =', ok_optim_yield WRITE (*, *) 'coef_peel=', coef_peel WRITE (*, *) 'flag_epKEorig=', flag_epKEorig WRITE (*, *) 'elcrit=', elcrit WRITE (*, *) 'tlcrit=', tlcrit WRITE (*, *) 'ejectliq=', ejectliq WRITE (*, *) 'ejectice=', ejectice WRITE (*, *) 'cvflag_prec_eject =', cvflag_prec_eject WRITE (*, *) 'qsat_depends_on_qt =', qsat_depends_on_qt WRITE (*, *) 'adiab_ascent_mass_flux_depends_on_ejectliq =', adiab_ascent_mass_flux_depends_on_ejectliq WRITE (*, *) 'keepbug_ice_frac =', keepbug_ice_frac first = .FALSE. END IF ! (first) beta = 1.0 - delt/tau alpha1 = 1.5E-3 !JYG Correction bug alpha alpha1 = alpha1*1.5 alpha = alpha1*delt/tau !JYG Bug ! cc increase alpha to compensate W decrease: ! c alpha = alpha*1.5 noconv_stop = max(2.,tau_stop/delt) RETURN END SUBROUTINE cv3_param SUBROUTINE cv3_incrcount(len, nd, delt, sig) IMPLICIT NONE ! ===================================================================== ! Increment the counter sig(nd) ! ===================================================================== include "cv3param.h" include "cvflag.h" !inputs: INTEGER, INTENT(IN) :: len INTEGER, INTENT(IN) :: nd REAL, INTENT(IN) :: delt ! timestep (seconds) !input/output REAL, DIMENSION(len,nd), INTENT(INOUT) :: sig !local variables INTEGER il ! print *,'cv3_incrcount : noconv_stop ',noconv_stop ! print *,'cv3_incrcount in, sig(1,nd) ',sig(1,nd) IF(ok_convstop) THEN DO il = 1, len sig(il, nd) = sig(il, nd) + 1. sig(il, nd) = min(sig(il,nd), noconv_stop+0.1) END DO ELSE DO il = 1, len sig(il, nd) = sig(il, nd) + 1. sig(il, nd) = min(sig(il,nd), 12.1) END DO ENDIF ! (ok_convstop) ! print *,'cv3_incrcount out, sig(1,nd) ',sig(1,nd) RETURN END SUBROUTINE cv3_incrcount SUBROUTINE cv3_prelim(len, nd, ndp1, t, q, p, ph, & lv, lf, cpn, tv, gz, h, hm, th) IMPLICIT NONE ! ===================================================================== ! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY ! "ori": from convect4.3 (vectorized) ! "convect3": to be exactly consistent with convect3 ! ===================================================================== ! inputs: INTEGER len, nd, ndp1 REAL t(len, nd), q(len, nd), p(len, nd), ph(len, ndp1) ! outputs: REAL lv(len, nd), lf(len, nd), cpn(len, nd), tv(len, nd) REAL gz(len, nd), h(len, nd), hm(len, nd) REAL th(len, nd) ! local variables: INTEGER k, i REAL rdcp REAL tvx, tvy ! convect3 REAL cpx(len, nd) include "cvthermo.h" include "cv3param.h" ! ori do 110 k=1,nlp ! abderr do 110 k=1,nl ! convect3 DO k = 1, nlp DO i = 1, len ! debug lv(i,k)= lv0-clmcpv*(t(i,k)-t0) lv(i, k) = lv0 - clmcpv*(t(i,k)-273.15) !! lf(i, k) = lf0 - clmci*(t(i,k)-273.15) ! erreur de signe !! lf(i, k) = lf0 + clmci*(t(i,k)-273.15) cpn(i, k) = cpd*(1.0-q(i,k)) + cpv*q(i, k) cpx(i, k) = cpd*(1.0-q(i,k)) + cl*q(i, k) ! ori tv(i,k)=t(i,k)*(1.0+q(i,k)*epsim1) tv(i, k) = t(i, k)*(1.0+q(i,k)/eps-q(i,k)) rdcp = (rrd*(1.-q(i,k))+q(i,k)*rrv)/cpn(i, k) th(i, k) = t(i, k)*(1000.0/p(i,k))**rdcp END DO END DO ! gz = phi at the full levels (same as p). !! DO i = 1, len !jyg !! gz(i, 1) = 0.0 !jyg !! END DO !jyg gz(:,:) = 0. !jyg: initialization of the whole array ! ori do 140 k=2,nlp DO k = 2, nl ! convect3 DO i = 1, len tvx = t(i, k)*(1.+q(i,k)/eps-q(i,k)) !convect3 tvy = t(i, k-1)*(1.+q(i,k-1)/eps-q(i,k-1)) !convect3 gz(i, k) = gz(i, k-1) + 0.5*rrd*(tvx+tvy)* & !convect3 (p(i,k-1)-p(i,k))/ph(i, k) !convect3 ! c print *,' gz(',k,')',gz(i,k),' tvx',tvx,' tvy ',tvy ! ori gz(i,k)=gz(i,k-1)+hrd*(tv(i,k-1)+tv(i,k)) ! ori & *(p(i,k-1)-p(i,k))/ph(i,k) END DO END DO ! h = phi + cpT (dry static energy). ! hm = phi + cp(T-Tbase)+Lq ! ori do 170 k=1,nlp DO k = 1, nl ! convect3 DO i = 1, len h(i, k) = gz(i, k) + cpn(i, k)*t(i, k) hm(i, k) = gz(i, k) + cpx(i, k)*(t(i,k)-t(i,1)) + lv(i, k)*q(i, k) END DO END DO RETURN END SUBROUTINE cv3_prelim SUBROUTINE cv3_feed(len, nd, ok_conserv_q, & t, q, u, v, p, ph, h, gz, & p1feed, p2feed, wght, & wghti, tnk, thnk, qnk, qsnk, unk, vnk, & cpnk, hnk, nk, icb, icbmax, iflag, gznk, plcl & #ifdef ISO & ,xt,xtnk & #endif & ) #ifdef ISO use infotrac_phy, ONLY: ntraciso=>ntiso #ifdef ISOVERIF use isotopes_verif_mod, ONLY: iso_verif_positif,iso_verif_noNaN,iso_verif_egalite use isotopes_mod, ONLY: iso_eau #endif #endif USE mod_phys_lmdz_transfert_para, ONLY : bcast USE add_phys_tend_mod, ONLY: fl_cor_ebil USE print_control_mod, ONLY: prt_level IMPLICIT NONE ! ================================================================ ! Purpose: CONVECTIVE FEED ! Main differences with cv_feed: ! - ph added in input ! - here, nk(i)=minorig ! - icb defined differently (plcl compared with ph instead of p) ! - dry static energy as argument instead of moist static energy ! Main differences with convect3: ! - we do not compute dplcldt and dplcldr of CLIFT anymore ! - values iflag different (but tests identical) ! - A,B explicitely defined (!...) ! ================================================================ include "cv3param.h" include "cvthermo.h" !inputs: INTEGER, INTENT (IN) :: len, nd LOGICAL, INTENT (IN) :: ok_conserv_q REAL, DIMENSION (len, nd), INTENT (IN) :: t, q, p REAL, DIMENSION (len, nd), INTENT (IN) :: u, v REAL, DIMENSION (len, nd), INTENT (IN) :: h, gz REAL, DIMENSION (len, nd+1), INTENT (IN) :: ph REAL, DIMENSION (len), INTENT (IN) :: p1feed REAL, DIMENSION (nd), INTENT (IN) :: wght !input-output REAL, DIMENSION (len), INTENT (INOUT) :: p2feed !outputs: INTEGER, INTENT (OUT) :: icbmax INTEGER, DIMENSION (len), INTENT (OUT) :: iflag, nk, icb REAL, DIMENSION (len, nd), INTENT (OUT) :: wghti REAL, DIMENSION (len), INTENT (OUT) :: tnk, thnk, qnk, qsnk REAL, DIMENSION (len), INTENT (OUT) :: unk, vnk REAL, DIMENSION (len), INTENT (OUT) :: cpnk, hnk, gznk REAL, DIMENSION (len), INTENT (OUT) :: plcl !local variables: INTEGER i, k, iter, niter INTEGER ihmin(len) REAL work(len) REAL pup(len), plo(len), pfeed(len) REAL plclup(len), plcllo(len), plclfeed(len) REAL pfeedmin(len) REAL posit(len) LOGICAL nocond(len) #ifdef ISO real xt(ntraciso,len,nd) real xtnk(ntraciso,len) integer ixt #endif !jyg20140217< INTEGER iostat LOGICAL, SAVE :: first LOGICAL, SAVE :: ok_new_feed REAL, SAVE :: dp_lcl_feed !$OMP THREADPRIVATE (first,ok_new_feed,dp_lcl_feed) DATA first/.TRUE./ DATA dp_lcl_feed/2./ #ifdef ISO #ifdef ISOVERIF do i=1,len do k=1,nd do ixt=1,ntraciso call iso_verif_noNaN(xt(ixt,i,k),'cv3_feed 241') enddo ! do ixt=1,ntraciso if (iso_eau.gt.0) then call iso_verif_egalite(xt(iso_eau,i,k),q(i,k), & & 'cv3_feed 399') endif enddo !do j=1,nd enddo !do i=1,len #endif ! initialiser quelques variables oubliees do i=1,len plcllo(i)=0.0 plclup(i)=0.0 plo(i)=0.0 pup(i)=0.0 enddo !do i=1,len #endif IF (first) THEN !$OMP MASTER ok_new_feed = ok_conserv_q OPEN (98, FILE='cv3feed_param.data', STATUS='old', FORM='formatted', IOSTAT=iostat) IF (iostat==0) THEN READ (98, *, END=998) ok_new_feed 998 CONTINUE CLOSE (98) END IF PRINT *, ' ok_new_feed: ', ok_new_feed !$OMP END MASTER call bcast(ok_new_feed) first = .FALSE. END IF !jyg> ! ------------------------------------------------------------------- ! --- Origin level of ascending parcels for convect3: ! ------------------------------------------------------------------- DO i = 1, len nk(i) = minorig gznk(i) = gz(i, nk(i)) END DO ! ------------------------------------------------------------------- ! --- Adjust feeding layer thickness so that lifting up to the top of ! --- the feeding layer does not induce condensation (i.e. so that ! --- plcl < p2feed). ! --- Method : iterative secant method. ! ------------------------------------------------------------------- ! 1- First bracketing of the solution : ph(nk+1), p2feed ! 1.a- LCL associated with p2feed DO i = 1, len pup(i) = p2feed(i) END DO IF (fl_cor_ebil >=2 ) THEN CALL cv3_estatmix(len, nd, iflag, p1feed, pup, p, ph, & t, q, u, v, h, gz, wght, & wghti, nk, tnk, thnk, qnk, qsnk, unk, vnk, plclup & #ifdef ISO & ,xt,xtnk & #endif & ) ELSE CALL cv3_enthalpmix(len, nd, iflag, p1feed, pup, p, ph, & t, q, u, v, wght, & wghti, nk, tnk, thnk, qnk, qsnk, unk, vnk, plclup & #ifdef ISO & ,xt,xtnk & #endif & ) ENDIF ! (fl_cor_ebil >=2 ) ! 1.b- LCL associated with ph(nk+1) DO i = 1, len plo(i) = ph(i, nk(i)+1) END DO IF (fl_cor_ebil >=2 ) THEN CALL cv3_estatmix(len, nd, iflag, p1feed, plo, p, ph, & t, q, u, v, h, gz, wght, & wghti, nk, tnk, thnk, qnk, qsnk, unk, vnk, plcllo & #ifdef ISO & ,xt,xtnk & #endif & ) ELSE CALL cv3_enthalpmix(len, nd, iflag, p1feed, plo, p, ph, & t, q, u, v, wght, & wghti, nk, tnk, thnk, qnk, qsnk, unk, vnk, plcllo & #ifdef ISO & ,xt,xtnk & #endif & ) ENDIF ! (fl_cor_ebil >=2 ) ! 2- Iterations niter = 5 DO iter = 1, niter DO i = 1, len plcllo(i) = min(plo(i), plcllo(i)) plclup(i) = max(pup(i), plclup(i)) nocond(i) = plclup(i) <= pup(i) END DO DO i = 1, len IF (nocond(i)) THEN pfeed(i) = pup(i) ELSE !JYG20140217< IF (ok_new_feed) THEN pfeed(i) = (pup(i)*(plo(i)-plcllo(i)-dp_lcl_feed)+ & plo(i)*(plclup(i)-pup(i)+dp_lcl_feed))/ & (plo(i)-plcllo(i)+plclup(i)-pup(i)) ELSE pfeed(i) = (pup(i)*(plo(i)-plcllo(i))+ & plo(i)*(plclup(i)-pup(i)))/ & (plo(i)-plcllo(i)+plclup(i)-pup(i)) END IF !JYG> END IF END DO !jyg20140217< ! For the last iteration, make sure that the top of the feeding layer ! and LCL are not in the same layer: IF (ok_new_feed) THEN IF (iter==niter) THEN DO i = 1,len !jyg pfeedmin(i) = ph(i,minorig+1) !jyg ENDDO !jyg DO k = minorig+1, nl !jyg !! DO k = minorig, nl !jyg DO i = 1, len IF (ph(i,k)>=plclfeed(i)) pfeedmin(i) = ph(i, k) END DO END DO DO i = 1, len pfeed(i) = max(pfeedmin(i), pfeed(i)) END DO END IF END IF !jyg> IF (fl_cor_ebil >=2 ) THEN CALL cv3_estatmix(len, nd, iflag, p1feed, pfeed, p, ph, & t, q, u, v, h, gz, wght, & wghti, nk, tnk, thnk, qnk, qsnk, unk, vnk, plclfeed & #ifdef ISO & ,xt,xtnk & #endif & ) ELSE CALL cv3_enthalpmix(len, nd, iflag, p1feed, pfeed, p, ph, & t, q, u, v, wght, & wghti, nk, tnk, thnk, qnk, qsnk, unk, vnk, plclfeed & #ifdef ISO & ,xt,xtnk & #endif & ) ENDIF ! (fl_cor_ebil >=2 ) #ifdef ISO #ifdef ISOVERIF if (iso_eau.gt.0) then do i=1,len call iso_verif_egalite(xtnk(iso_eau,i),qnk(i), & & 'cv3_feed 557') enddo ! do i=1,len endif #endif #endif !jyg20140217< IF (ok_new_feed) THEN DO i = 1, len posit(i) = (sign(1.,plclfeed(i)-pfeed(i)+dp_lcl_feed)+1.)*0.5 IF (plclfeed(i)-pfeed(i)+dp_lcl_feed==0.) posit(i) = 1. END DO ELSE DO i = 1, len posit(i) = (sign(1.,plclfeed(i)-pfeed(i))+1.)*0.5 IF (plclfeed(i)==pfeed(i)) posit(i) = 1. END DO END IF !jyg> DO i = 1, len ! - posit = 1 when lcl is below top of feeding layer (plclfeed>pfeed) ! - => pup=pfeed ! - posit = 0 when lcl is above top of feeding layer (plclfeed plo=pfeed pup(i) = posit(i)*pfeed(i) + (1.-posit(i))*pup(i) plo(i) = (1.-posit(i))*pfeed(i) + posit(i)*plo(i) plclup(i) = posit(i)*plclfeed(i) + (1.-posit(i))*plclup(i) plcllo(i) = (1.-posit(i))*plclfeed(i) + posit(i)*plcllo(i) END DO END DO ! iter DO i = 1, len p2feed(i) = pfeed(i) plcl(i) = plclfeed(i) END DO DO i = 1, len cpnk(i) = cpd*(1.0-qnk(i)) + cpv*qnk(i) hnk(i) = gz(i, 1) + cpnk(i)*tnk(i) END DO ! ------------------------------------------------------------------- ! --- Check whether parcel level temperature and specific humidity ! --- are reasonable ! ------------------------------------------------------------------- IF (cv_flag_feed == 1) THEN DO i = 1, len IF (((tnk(i)<250.0) .OR. & (qnk(i)<=0.0)) .AND. & (iflag(i)==0)) iflag(i) = 7 END DO ELSEIF (cv_flag_feed >= 2) THEN ! --- and demand that LCL be high enough DO i = 1, len IF (((tnk(i)<250.0) .OR. & (qnk(i)<=0.0) .OR. & (plcl(i)>min(0.99*ph(i,1),ph(i,3)))) .AND. & (iflag(i)==0)) iflag(i) = 7 END DO ENDIF IF (prt_level .GE. 10) THEN print *,'cv3_feed : iflag(1), pfeed(1), plcl(1), wghti(1,k) ', & iflag(1), pfeed(1), plcl(1), (wghti(1,k),k=1,10) ENDIF ! ------------------------------------------------------------------- ! --- Calculate first level above lcl (=icb) ! ------------------------------------------------------------------- !@ do 270 i=1,len !@ icb(i)=nlm !@ 270 continue !@c !@ do 290 k=minorig,nl !@ do 280 i=1,len !@ if((k.ge.(nk(i)+1)).and.(p(i,k).lt.plcl(i))) !@ & icb(i)=min(icb(i),k) !@ 280 continue !@ 290 continue !@c !@ do 300 i=1,len !@ if((icb(i).ge.nlm).and.(iflag(i).eq.0))iflag(i)=9 !@ 300 continue DO i = 1, len icb(i) = nlm END DO ! la modification consiste a comparer plcl a ph et non a p: ! icb est defini par : ph(icb)ntiso USE isotopes_mod, ONLY: pxtmelt,pxtice,pxtmin,pxtmax,cond_temp_env, & iso_eau,iso_HDO,ridicule USE isotopes_routines_mod, ONLY: condiso_liq_ice_vectall #ifdef ISOTRAC USE isotopes_routines_mod, ONLY: condiso_liq_ice_vectall_trac #ifdef ISOVERIF use isotopes_verif_mod, ONLY: iso_verif_traceur #endif #endif #ifdef ISOVERIF use isotopes_verif_mod, ONLY: errmax,errmaxrel,Tmin_verif, & iso_verif_egalite_choix, iso_verif_noNaN,iso_verif_aberrant, & iso_verif_egalite,iso_verif_egalite_choix_nostop,iso_verif_positif_nostop, & iso_verif_egalite_nostop,iso_verif_positif #endif #endif IMPLICIT NONE ! ---------------------------------------------------------------- ! Equivalent de TLIFT entre NK et ICB+1 inclus ! Differences with convect4: ! - specify plcl in input ! - icbs is the first level above LCL (may differ from icb) ! - in the iterations, used x(icbs) instead x(icb) ! - many minor differences in the iterations ! - tvp is computed in only one time ! - icbs: first level above Plcl (IMIN de TLIFT) in output ! - if icbs=icb, compute also tp(icb+1),tvp(icb+1) & clw(icb+1) ! ---------------------------------------------------------------- include "cvthermo.h" include "cv3param.h" ! inputs: INTEGER, INTENT (IN) :: len, nd INTEGER, DIMENSION (len), INTENT (IN) :: icb REAL, DIMENSION (len, nd), INTENT (IN) :: t, qs, gz REAL, DIMENSION (len), INTENT (IN) :: tnk, qnk, gznk REAL, DIMENSION (len, nd), INTENT (IN) :: p REAL, DIMENSION (len), INTENT (IN) :: plcl ! convect3 #ifdef ISO !integer niso real xtnk(ntraciso,len) #endif ! outputs: INTEGER, DIMENSION (len), INTENT (OUT) :: icbs REAL, DIMENSION (len, nd), INTENT (OUT) :: tp, tvp, clw #ifdef ISO real xtclw(ntraciso,len,nd) #endif ! local variables: INTEGER i, k INTEGER icb1(len), icbsmax2 ! convect3 REAL tg, qg, alv, s, ahg, tc, denom, es, rg REAL ah0(len), cpp(len) REAL ticb(len), gzicb(len) REAL qsicb(len) ! convect3 REAL cpinv(len) ! convect3 ! convect3 #ifdef ISO integer ixt real zfice(len),zxtliq(ntraciso,len),zxtice(ntraciso,len) real q_k(len),clw_k(len),tg_k(len),xt_k(ntraciso,len) #endif ! ------------------------------------------------------------------- ! --- Calculates the lifted parcel virtual temperature at nk, ! --- the actual temperature, and the adiabatic ! --- liquid water content. The procedure is to solve the equation. ! cp*tp+L*qp+phi=cp*tnk+L*qnk+gznk. ! ------------------------------------------------------------------- ! *** Calculate certain parcel quantities, including static energy *** DO i = 1, len ah0(i) = (cpd*(1.-qnk(i))+cl*qnk(i))*tnk(i) + qnk(i)*(lv0-clmcpv*(tnk(i)-273.15)) + gznk(i) cpp(i) = cpd*(1.-qnk(i)) + qnk(i)*cpv cpinv(i) = 1./cpp(i) END DO ! *** Calculate lifted parcel quantities below cloud base *** DO i = 1, len !convect3 icb1(i) = min(max(icb(i), 2), nl) ! if icb is below LCL, start loop at ICB+1: ! (icbs est le premier niveau au-dessus du LCL) icbs(i) = icb1(i) !convect3 IF (plcl(i)p(icb), then icbs=icb ! * the routine above computes tvp from minorig to icbs (included). ! * to compute buoybase (in cv3_trigger.F), both tvp(icb) and tvp(icb+1) ! must be known. This is the case if icbs=icb+1, but not if icbs=icb. ! * therefore, in the case icbs=icb, we compute tvp at level icb+1 ! (tvp at other levels will be computed in cv3_undilute2.F) DO i = 1, len ticb(i) = t(i, icb(i)+1) gzicb(i) = gz(i, icb(i)+1) qsicb(i) = qs(i, icb(i)+1) END DO DO i = 1, len tg = ticb(i) qg = qsicb(i) ! convect3 ! debug alv=lv0-clmcpv*(ticb(i)-t0) alv = lv0 - clmcpv*(ticb(i)-273.15) ! First iteration. ! ori s=cpd+alv*alv*qg/(rrv*ticb(i)*ticb(i)) s = cpd*(1.-qnk(i)) + cl*qnk(i) & ! convect3 +alv*alv*qg/(rrv*ticb(i)*ticb(i)) ! convect3 s = 1./s ! ori ahg=cpd*tg+(cl-cpd)*qnk(i)*ticb(i)+alv*qg+gzicb(i) ahg = cpd*tg + (cl-cpd)*qnk(i)*tg + alv*qg + gzicb(i) ! convect3 tg = tg + s*(ah0(i)-ahg) ! ori tg=max(tg,35.0) ! debug tc=tg-t0 tc = tg - 273.15 denom = 243.5 + tc denom = max(denom, 1.0) ! convect3 ! ori if(tc.ge.0.0)then es = 6.112*exp(17.67*tc/denom) ! ori else ! ori es=exp(23.33086-6111.72784/tg+0.15215*log(tg)) ! ori endif ! ori qg=eps*es/(p(i,icb(i))-es*(1.-eps)) qg = eps*es/(p(i,icb(i)+1)-es*(1.-eps)) ! qg=max(0.0,qg) ! C Risi ! Second iteration. ! ori s=cpd+alv*alv*qg/(rrv*ticb(i)*ticb(i)) ! ori s=1./s ! ori ahg=cpd*tg+(cl-cpd)*qnk(i)*ticb(i)+alv*qg+gzicb(i) ahg = cpd*tg + (cl-cpd)*qnk(i)*tg + alv*qg + gzicb(i) ! convect3 tg = tg + s*(ah0(i)-ahg) ! ori tg=max(tg,35.0) ! debug tc=tg-t0 tc = tg - 273.15 denom = 243.5 + tc denom = max(denom, 1.0) ! convect3 ! ori if(tc.ge.0.0)then es = 6.112*exp(17.67*tc/denom) ! ori else ! ori es=exp(23.33086-6111.72784/tg+0.15215*log(tg)) ! ori end if ! ori qg=eps*es/(p(i,icb(i))-es*(1.-eps)) qg = eps*es/(p(i,icb(i)+1)-es*(1.-eps)) ! qg=max(0.0,qg) ! C Risi alv = lv0 - clmcpv*(ticb(i)-273.15) ! ori c approximation here: ! ori tp(i,icb(i))=(ah0(i)-(cl-cpd)*qnk(i)*ticb(i) ! ori & -gz(i,icb(i))-alv*qg)/cpd ! convect3: no approximation: tp(i, icb(i)+1) = (ah0(i)-gz(i,icb(i)+1)-alv*qg)/(cpd+(cl-cpd)*qnk(i)) ! ori clw(i,icb(i))=qnk(i)-qg ! ori clw(i,icb(i))=max(0.0,clw(i,icb(i))) clw(i, icb(i)+1) = qnk(i) - qg clw(i, icb(i)+1) = max(0.0, clw(i,icb(i)+1)) rg = qg/(1.-qnk(i)) ! ori tvp(i,icb(i))=tp(i,icb(i))*(1.+rg*epsi) ! convect3: (qg utilise au lieu du vrai mixing ratio rg) tvp(i, icb(i)+1) = tp(i, icb(i)+1)*(1.+qg/eps-qnk(i)) !whole thing END DO #ifdef ISO do i=1,len zfice(i) = 1.0-(t(i,icb(i)+1)-pxtice)/(pxtmelt-pxtice) zfice(i) = MIN(MAX(zfice(i),0.0),1.0) ! call calcul_zfice(tp(i,icb(i)+1),zfice) enddo !do i=1,len do i=1,len clw_k(i)=clw(i,icb(i)+1) tg_k(i)=t(i,icb(i)+1) #ifdef ISOVERIF call iso_verif_positif(tg_k(i)-20.0,'cv3_routines 750') #endif enddo !do i=1,len #ifdef ISOVERIF do i=1,len call iso_verif_noNaN(qnk(i),'cv3_routines 881') do ixt=1,ntraciso call iso_verif_noNaN(xtnk(ixt,i),'cv3_routines 883') enddo ! do ixt=1,ntraciso enddo ! do i=1,len #endif #ifdef ISOVERIF write(*,*) 'cv3_routines 739: avant condiso' if (iso_HDO.gt.0) then do i=1,len call iso_verif_aberrant(xtnk(iso_hdo,i)/qnk(i), & & 'cv3_routines 725') enddo endif !if (iso_HDO.gt.0) then do i=1,len call iso_verif_positif(qnk(i)-clw_k(i), & & 'cv3_routines 808') enddo !do i=1,len #ifdef ISOTRAC do i=1,len call iso_verif_traceur(xtclw(1,i,k),'cv3_routines 738') enddo #endif #endif call condiso_liq_ice_vectall(xtnk(1,1),qnk(1), & & clw_k(1),tg_k(1), & & zfice(1),zxtice(1,1),zxtliq(1,1),len) #ifdef ISOTRAC call condiso_liq_ice_vectall_trac(xtnk(1,1),qnk(1), & & clw_k(1),tg_k(1), & & zfice(1),zxtice(1,1),zxtliq(1,1),len) #endif do i=1,len do ixt = 1, ntraciso xtclw(ixt,i,icb(i)+1)=zxtice(ixt,i)+zxtliq(ixt,i) xtclw(ixt,i,icb(i)+1)=max(0.0,xtclw(ixt,i,icb(i)+1)) enddo !do ixt = 1, niso enddo !do i=1,len #ifdef ISOVERIF !write(*,*) 'DEBUG ISO B' do i=1,len if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtclw(iso_eau,i,icb(i)+1), & & clw(i,icb(i)+1),'cv3_routines 708',errmax,errmaxrel) endif ! if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xtclw(1,i,icb(i)+1), & & 'cv3_routines 760') #endif enddo !do i=1,len !write(*,*) 'FIN DEBUG ISO B' #endif #endif RETURN END SUBROUTINE cv3_undilute1 SUBROUTINE cv3_trigger(len, nd, icb, plcl, p, th, tv, tvp, thnk, & pbase, buoybase, iflag, sig, w0) IMPLICIT NONE ! ------------------------------------------------------------------- ! --- TRIGGERING ! - computes the cloud base ! - triggering (crude in this version) ! - relaxation of sig and w0 when no convection ! Caution1: if no convection, we set iflag=14 ! (it used to be 0 in convect3) ! Caution2: at this stage, tvp (and thus buoy) are know up ! through icb only! ! -> the buoyancy below cloud base not (yet) set to the cloud base buoyancy ! ------------------------------------------------------------------- include "cv3param.h" ! input: INTEGER len, nd INTEGER icb(len) REAL plcl(len), p(len, nd) REAL th(len, nd), tv(len, nd), tvp(len, nd) REAL thnk(len) ! output: REAL pbase(len), buoybase(len) ! input AND output: INTEGER iflag(len) REAL sig(len, nd), w0(len, nd) ! local variables: INTEGER i, k REAL tvpbase, tvbase, tdif, ath, ath1 ! *** set cloud base buoyancy at (plcl+dpbase) level buoyancy DO i = 1, len pbase(i) = plcl(i) + dpbase tvpbase = tvp(i, icb(i)) *(pbase(i)-p(i,icb(i)+1))/(p(i,icb(i))-p(i,icb(i)+1)) + & tvp(i, icb(i)+1)*(p(i,icb(i))-pbase(i)) /(p(i,icb(i))-p(i,icb(i)+1)) tvbase = tv(i, icb(i)) *(pbase(i)-p(i,icb(i)+1))/(p(i,icb(i))-p(i,icb(i)+1)) + & tv(i, icb(i)+1)*(p(i,icb(i))-pbase(i)) /(p(i,icb(i))-p(i,icb(i)+1)) buoybase(i) = tvpbase - tvbase END DO ! *** make sure that column is dry adiabatic between the surface *** ! *** and cloud base, and that lifted air is positively buoyant *** ! *** at cloud base *** ! *** if not, return to calling program after resetting *** ! *** sig(i) and w0(i) *** ! oct3 do 200 i=1,len ! oct3 ! oct3 tdif = buoybase(i) ! oct3 ath1 = th(i,1) ! oct3 ath = th(i,icb(i)-1) - dttrig ! oct3 ! oct3 if (tdif.lt.dtcrit .or. ath.gt.ath1) then ! oct3 do 60 k=1,nl ! oct3 sig(i,k) = beta*sig(i,k) - 2.*alpha*tdif*tdif ! oct3 sig(i,k) = AMAX1(sig(i,k),0.0) ! oct3 w0(i,k) = beta*w0(i,k) ! oct3 60 continue ! oct3 iflag(i)=4 ! pour version vectorisee ! oct3c convect3 iflag(i)=0 ! oct3cccc return ! oct3 endif ! oct3 ! oct3200 continue ! -- oct3: on reecrit la boucle 200 (pour la vectorisation) DO k = 1, nl DO i = 1, len tdif = buoybase(i) ath1 = thnk(i) ath = th(i, icb(i)-1) - dttrig IF (tdifath1) THEN sig(i, k) = beta*sig(i, k) - 2.*alpha*tdif*tdif sig(i, k) = amax1(sig(i,k), 0.0) w0(i, k) = beta*w0(i, k) iflag(i) = 14 ! pour version vectorisee ! convect3 iflag(i)=0 END IF END DO END DO ! fin oct3 -- RETURN END SUBROUTINE cv3_trigger SUBROUTINE cv3_compress(len, nloc, ncum, nd, ntra, & iflag1, nk1, icb1, icbs1, & plcl1, tnk1, qnk1, gznk1, pbase1, buoybase1, & t1, q1, qs1, u1, v1, gz1, th1, & tra1, & h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, & sig1, w01, & iflag, nk, icb, icbs, & plcl, tnk, qnk, gznk, pbase, buoybase, & t, q, qs, u, v, gz, th, & tra, & h, lv, cpn, p, ph, tv, tp, tvp, clw, & sig, w0 & #ifdef ISO & ,xtnk1,xt1,xtclw1 & & ,xtnk,xt,xtclw & #endif & ) USE print_control_mod, ONLY: lunout #ifdef ISO use infotrac_phy, ONLY: ntraciso=>ntiso use isotopes_mod, ONLY: essai_convergence, iso_eau,iso_HDO #ifdef ISOVERIF use isotopes_verif_mod, ONLY: errmax,errmaxrel, & iso_verif_egalite_choix, iso_verif_noNaN,iso_verif_aberrant, & iso_verif_egalite,iso_verif_egalite_choix_nostop,iso_verif_positif_nostop, & iso_verif_egalite_nostop,iso_verif_positif #endif #endif IMPLICIT NONE include "cv3param.h" !inputs: INTEGER len, ncum, nd, ntra, nloc INTEGER iflag1(len), nk1(len), icb1(len), icbs1(len) REAL plcl1(len), tnk1(len), qnk1(len), gznk1(len) REAL pbase1(len), buoybase1(len) REAL t1(len, nd), q1(len, nd), qs1(len, nd), u1(len, nd), v1(len, nd) REAL gz1(len, nd), h1(len, nd), lv1(len, nd), cpn1(len, nd) REAL p1(len, nd), ph1(len, nd+1), tv1(len, nd), tp1(len, nd) REAL tvp1(len, nd), clw1(len, nd) REAL th1(len, nd) REAL sig1(len, nd), w01(len, nd) REAL tra1(len, nd, ntra) #ifdef ISO !integer niso real xtnk1(ntraciso,len) real xt1(ntraciso,len,nd), xtclw1(ntraciso,len,nd) #endif !outputs: ! en fait, on a nloc=len pour l'instant (cf cv_driver) INTEGER iflag(nloc), nk(nloc), icb(nloc), icbs(nloc) REAL plcl(nloc), tnk(nloc), qnk(nloc), gznk(nloc) REAL pbase(nloc), buoybase(nloc) REAL t(nloc, nd), q(nloc, nd), qs(nloc, nd), u(nloc, nd), v(nloc, nd) REAL gz(nloc, nd), h(nloc, nd), lv(nloc, nd), cpn(nloc, nd) REAL p(nloc, nd), ph(nloc, nd+1), tv(nloc, nd), tp(nloc, nd) REAL tvp(nloc, nd), clw(nloc, nd) REAL th(nloc, nd) REAL sig(nloc, nd), w0(nloc, nd) REAL tra(nloc, nd, ntra) #ifdef ISO real xtnk(ntraciso,nloc) real xt(ntraciso,nloc,nd), xtclw(ntraciso,nloc,nd) #endif !local variables: INTEGER i, k, nn, j #ifdef ISO integer ixt ! logical negation #endif CHARACTER (LEN=20) :: modname = 'cv3_compress' CHARACTER (LEN=80) :: abort_message DO k = 1, nl + 1 nn = 0 DO i = 1, len IF (iflag1(i)==0) THEN nn = nn + 1 sig(nn, k) = sig1(i, k) w0(nn, k) = w01(i, k) t(nn, k) = t1(i, k) q(nn, k) = q1(i, k) qs(nn, k) = qs1(i, k) u(nn, k) = u1(i, k) v(nn, k) = v1(i, k) gz(nn, k) = gz1(i, k) h(nn, k) = h1(i, k) lv(nn, k) = lv1(i, k) cpn(nn, k) = cpn1(i, k) p(nn, k) = p1(i, k) ph(nn, k) = ph1(i, k) tv(nn, k) = tv1(i, k) tp(nn, k) = tp1(i, k) tvp(nn, k) = tvp1(i, k) clw(nn, k) = clw1(i, k) th(nn, k) = th1(i, k) #ifdef ISO do ixt = 1, ntraciso xt(ixt,nn,k)=xt1(ixt,i,k) xtclw(ixt,nn,k)=xtclw1(ixt,i,k) enddo #endif END IF END DO END DO !AC! do 121 j=1,ntra !AC!ccccc do 111 k=1,nl+1 !AC! do 111 k=1,nd !AC! nn=0 !AC! do 101 i=1,len !AC! if(iflag1(i).eq.0)then !AC! nn=nn+1 !AC! tra(nn,k,j)=tra1(i,k,j) !AC! endif !AC! 101 continue !AC! 111 continue !AC! 121 continue IF (nn/=ncum) THEN WRITE (lunout, *) 'strange! nn not equal to ncum: ', nn, ncum abort_message = '' CALL abort_physic(modname, abort_message, 1) END IF nn = 0 DO i = 1, len IF (iflag1(i)==0) THEN nn = nn + 1 pbase(nn) = pbase1(i) buoybase(nn) = buoybase1(i) plcl(nn) = plcl1(i) tnk(nn) = tnk1(i) qnk(nn) = qnk1(i) gznk(nn) = gznk1(i) nk(nn) = nk1(i) icb(nn) = icb1(i) icbs(nn) = icbs1(i) iflag(nn) = iflag1(i) #ifdef ISO do ixt=1,ntraciso xtnk(ixt,nn)=xtnk1(ixt,i) enddo #endif END IF END DO #ifdef ISO #ifdef ISOVERIF if (iso_eau.gt.0) then do k = 1, nd do i = 1, ncum call iso_verif_egalite_choix(xtclw(iso_eau,nn,k),clw(nn,k), & & 'compress 973',errmax,errmaxrel) call iso_verif_egalite_choix(xt(iso_eau,nn,k),q(nn,k), & & 'compress 975',errmax,errmaxrel) enddo enddo endif !if (iso_eau.gt.0) then do k = 1, nd do i = 1, nloc call iso_verif_positif(q(i,k),'compress 1004') enddo enddo #endif #endif RETURN END SUBROUTINE cv3_compress SUBROUTINE icefrac(t, clw, qi, nl, len) IMPLICIT NONE !JAM-------------------------------------------------------------------- ! Calcul de la quantite d'eau sous forme de glace ! -------------------------------------------------------------------- INTEGER nl, len REAL qi(len, nl) REAL t(len, nl), clw(len, nl) REAL fracg INTEGER k, i DO k = 3, nl DO i = 1, len IF (t(i,k)>263.15) THEN qi(i, k) = 0. ELSE IF (t(i,k)<243.15) THEN qi(i, k) = clw(i, k) ELSE fracg = (263.15-t(i,k))/20 qi(i, k) = clw(i, k)*fracg END IF END IF ! print*,t(i,k),qi(i,k),'temp,testglace' END DO END DO RETURN END SUBROUTINE icefrac SUBROUTINE cv3_undilute2(nloc, ncum, nd, iflag, icb, icbs, nk, & tnk, qnk, gznk, hnk, t, q, qs, gz, & p, ph, h, tv, lv, lf, pbase, buoybase, plcl, & inb, tp, tvp, clw, hp, ep, sigp, buoy, & frac_a, frac_s, qpreca, qta & #ifdef ISO & ,xtnk,xt,xtclw,xtta & #endif & ) USE print_control_mod, ONLY: prt_level #ifdef ISO use infotrac_phy, ONLY: ntraciso=>ntiso USE isotopes_mod, ONLY: pxtmelt,pxtice,pxtmin,pxtmax,cond_temp_env, & iso_eau,iso_HDO USE isotopes_routines_mod, ONLY: condiso_liq_ice_vectall #ifdef ISOTRAC USE isotopes_routines_mod, ONLY: condiso_liq_ice_vectall_trac #ifdef ISOVERIF USE isotopes_verif_mod, ONLY: iso_verif_traceur #endif #endif #ifdef ISOVERIF use isotopes_verif_mod, ONLY: errmax,errmaxrel, & iso_verif_egalite_choix, iso_verif_noNaN,iso_verif_aberrant, & iso_verif_egalite,iso_verif_egalite_choix_nostop,iso_verif_positif_nostop, & iso_verif_egalite_nostop,iso_verif_positif #endif #endif IMPLICIT NONE ! --------------------------------------------------------------------- ! Purpose: ! FIND THE REST OF THE LIFTED PARCEL TEMPERATURES ! & ! COMPUTE THE PRECIPITATION EFFICIENCIES AND THE ! FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD ! & ! FIND THE LEVEL OF NEUTRAL BUOYANCY ! Main differences convect3/convect4: ! - icbs (input) is the first level above LCL (may differ from icb) ! - many minor differences in the iterations ! - condensed water not removed from tvp in convect3 ! - vertical profile of buoyancy computed here (use of buoybase) ! - the determination of inb is different ! - no inb1, only inb in output ! --------------------------------------------------------------------- include "cvthermo.h" include "cv3param.h" include "conema3.h" include "cvflag.h" include "YOMCST2.h" !inputs: INTEGER, INTENT (IN) :: ncum, nd, nloc INTEGER, DIMENSION (nloc), INTENT (IN) :: icb, icbs, nk REAL, DIMENSION (nloc, nd), INTENT (IN) :: t, q, qs, gz REAL, DIMENSION (nloc, nd), INTENT (IN) :: p REAL, DIMENSION (nloc, nd+1), INTENT (IN) :: ph REAL, DIMENSION (nloc), INTENT (IN) :: tnk, qnk, gznk REAL, DIMENSION (nloc), INTENT (IN) :: hnk REAL, DIMENSION (nloc, nd), INTENT (IN) :: lv, lf, tv, h REAL, DIMENSION (nloc), INTENT (IN) :: pbase, buoybase, plcl #ifdef ISO REAL, DIMENSION (ntraciso,nloc, nd), INTENT (IN) :: xt REAL, DIMENSION (ntraciso,nloc), INTENT (IN) :: xtnk #endif !input/outputs: REAL, DIMENSION (nloc, nd), INTENT (INOUT) :: tp, tvp, clw ! Input for k = 1, icb+1 (computed in cv3_undilute1) ! Output above INTEGER, DIMENSION (nloc), INTENT (INOUT) :: iflag #ifdef ISO REAL, DIMENSION (ntraciso,nloc, nd), INTENT (INOUT) :: xtclw #endif !outputs: INTEGER, DIMENSION (nloc), INTENT (OUT) :: inb REAL, DIMENSION (nloc, nd), INTENT (OUT) :: ep, sigp, hp REAL, DIMENSION (nloc, nd), INTENT (OUT) :: buoy REAL, DIMENSION (nloc, nd), INTENT (OUT) :: frac_a, frac_s REAL, DIMENSION (nloc, nd), INTENT (OUT) :: qpreca REAL, DIMENSION (nloc, nd), INTENT (OUT) :: qta #ifdef ISO REAL, DIMENSION (ntraciso,nloc, nd), INTENT (OUT) :: xtta #endif !local variables: INTEGER i, j, k REAL smallestreal REAL tg, qg, dqgdT, ahg, alv, alf, s, tc, es, esi, denom, rg, tca, elacrit REAL :: phinu2p REAL :: qhthreshold REAL :: als REAL :: qsat_new, snew REAL, DIMENSION (nloc,nd) :: qi REAL, DIMENSION (nloc,nd) :: ha ! moist static energy of adiabatic ascents ! taking into account precip ejection REAL, DIMENSION (nloc,nd) :: hla ! liquid water static energy of adiabatic ascents ! taking into account precip ejection REAL, DIMENSION (nloc,nd) :: qcld ! specific cloud water REAL, DIMENSION (nloc,nd) :: qhsat ! specific humidity at saturation REAL, DIMENSION (nloc,nd) :: dqhsatdT ! dqhsat/dT REAL, DIMENSION (nloc,nd) :: frac ! ice fraction function of envt temperature REAL, DIMENSION (nloc,nd) :: qps ! specific solid precipitation REAL, DIMENSION (nloc,nd) :: qpl ! specific liquid precipitation REAL, DIMENSION (nloc) :: ah0, cape, capem, byp LOGICAL, DIMENSION (nloc) :: lcape INTEGER, DIMENSION (nloc) :: iposit REAL :: denomm1 REAL :: by, defrac, pden, tbis REAL :: fracg REAL :: deltap REAL, SAVE :: Tx, Tm DATA Tx/263.15/, Tm/243.15/ !$OMP THREADPRIVATE(Tx, Tm) REAL :: aa, bb, dd, ddelta, discr REAL :: ff, fp REAL :: coefx, coefm, Zx, Zm, Ux, U, Um #ifdef ISO integer ixt real zfice(nloc),zxtliq(ntraciso,nloc),zxtice(ntraciso,nloc) real clw_k(nloc),tg_k(nloc),xt_k(ntraciso,nloc) #endif IF (prt_level >= 10) THEN print *,'cv3_undilute2.0. icvflag_Tpa, t(1,k), q(1,k), qs(1,k) ', & icvflag_Tpa, (k, t(1,k), q(1,k), qs(1,k), k = 1,nl) ENDIF smallestreal=tiny(smallestreal) ! ===================================================================== ! --- SOME INITIALIZATIONS ! ===================================================================== DO k = 1, nl DO i = 1, ncum qi(i, k) = 0. END DO END DO #ifdef ISOVERIF qta(:,:) = 0. xtta(:,:,:) = 0. #endif ! ===================================================================== ! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES ! ===================================================================== ! --- The procedure is to solve the equation. ! cp*tp+L*qp+phi=cp*tnk+L*qnk+gznk. ! *** Calculate certain parcel quantities, including static energy *** DO i = 1, ncum ah0(i) = (cpd*(1.-qnk(i))+cl*qnk(i))*tnk(i)+ & ! debug qnk(i)*(lv0-clmcpv*(tnk(i)-t0))+gznk(i) qnk(i)*(lv0-clmcpv*(tnk(i)-273.15)) + gznk(i) END DO ! ! Ice fraction ! IF (cvflag_ice) THEN DO k = minorig, nl DO i = 1, ncum frac(i, k) = (Tx - t(i,k))/(Tx - Tm) frac(i, k) = min(max(frac(i,k),0.0), 1.0) END DO END DO ! Below cloud base, set ice fraction to cloud base value DO k = 1, nl DO i = 1, ncum IF (kjyg ! ! *** Find lifted parcel quantities above cloud base *** !---------------------------------------------------------------------------- ! IF (icvflag_Tpa == 2) THEN #ifdef ISO CALL abort_gcm('cv3_routines 1813','isos pas prevus ici',1) #endif ! !---------------------------------------------------------------------------- ! DO k = minorig + 1, nl DO i = 1,ncum tp(i,k) = t(i,k) ENDDO !! alv = lv0 - clmcpv*(t(i,k)-273.15) !! alf = lf0 + clmci*(t(i,k)-273.15) !! als = alf + alv DO j = 1,4 DO i = 1, ncum ! ori if(k.ge.(icb(i)+1))then IF (k>=(icbs(i)+1)) THEN ! convect3 tg = tp(i, k) IF (tg .gt. Tx) THEN es = 6.112*exp(17.67*(tg - 273.15)/(tg + 243.5 - 273.15)) qg = eps*es/(p(i,k)-es*(1.-eps)) ELSE esi = exp(23.33086-(6111.72784/tg)+0.15215*log(tg)) qg = eps*esi/(p(i,k)-esi*(1.-eps)) ENDIF ! Ice fraction ff = 0. fp = 1./(Tx - Tm) IF (tg < Tx) THEN IF (tg > Tm) THEN ff = (Tx - tg)*fp ELSE ff = 1. ENDIF ! (tg > Tm) ENDIF ! (tg < Tx) ! Intermediate variables aa = cpd + (cl-cpd)*qnk(i) + lv(i,k)*lv(i,k)*qg/(rrv*tg*tg) ahg = (cpd + (cl-cpd)*qnk(i))*tg + lv(i,k)*qg - & lf(i,k)*ff*(qnk(i) - qg) + gz(i,k) dd = lf(i,k)*lv(i,k)*qg/(rrv*tg*tg) ddelta = lf(i,k)*(qnk(i) - qg) bb = aa + ddelta*fp + dd*fp*(Tx-tg) ! Compute Zx and Zm coefx = aa coefm = aa + dd IF (tg .gt. Tx) THEN Zx = ahg + coefx*(Tx - tg) Zm = ahg - ddelta + coefm*(Tm - tg) ELSE IF (tg .gt. Tm) THEN Zx = ahg + (coefx +fp*ddelta)*(Tx - Tg) Zm = ahg + (coefm +fp*ddelta)*(Tm - Tg) ELSE Zx = ahg + ddelta + coefx*(Tx - tg) Zm = ahg + coefm*(Tm - tg) ENDIF ! (tg .gt. Tm) ENDIF ! (tg .gt. Tx) ! Compute the masks Um, U, Ux Um = (sign(1., Zm-ah0(i))+1.)/2. Ux = (sign(1., ah0(i)-Zx)+1.)/2. U = (1. - Um)*(1. - Ux) ! Compute the updated parcell temperature Tp : 3 cases depending on tg value IF (tg .gt. Tx) THEN discr = bb*bb - 4*dd*fp*(ah0(i) - ahg + ddelta*fp*(Tx-tg)) Tp(i,k) = tg + & Um* (ah0(i) - ahg + ddelta) /(aa + dd) + & U *2*(ah0(i) - ahg + ddelta*fp*(Tx-tg))/(bb + sqrt(discr)) + & Ux* (ah0(i) - ahg) /aa ELSEIF (tg .gt. Tm) THEN discr = bb*bb - 4*dd*fp*(ah0(i) - ahg) Tp(i,k) = tg + & Um* (ah0(i) - ahg + ddelta*fp*(tg-Tm))/(aa + dd) + & U *2*(ah0(i) - ahg) /(bb + sqrt(discr)) + & Ux* (ah0(i) - ahg + ddelta*fp*(tg-Tx))/aa ELSE discr = bb*bb - 4*dd*fp*(ah0(i) - ahg + ddelta*fp*(Tm-tg)) Tp(i,k) = tg + & Um* (ah0(i) - ahg) /(aa + dd) + & U *2*(ah0(i) - ahg + ddelta*fp*(Tm-tg))/(bb + sqrt(discr)) + & Ux* (ah0(i) - ahg - ddelta) /aa ENDIF ! (tg .gt. Tx) ! !! print *,' j, k, Um, U, Ux, aa, bb, discr, dd, ddelta ', j, k, Um, U, Ux, aa, bb, discr, dd, ddelta !! print *,' j, k, ah0(i), ahg, tg, qg, tp(i,k), ff ', j, k, ah0(i), ahg, tg, qg, tp(i,k), ff END IF ! (k>=(icbs(i)+1)) END DO ! i = 1, ncum END DO ! j = 1,4 DO i = 1, ncum IF (k>=(icbs(i)+1)) THEN ! convect3 tg = tp(i, k) IF (tg .gt. Tx) THEN es = 6.112*exp(17.67*(tg - 273.15)/(tg + 243.5 - 273.15)) qg = eps*es/(p(i,k)-es*(1.-eps)) ELSE esi = exp(23.33086-(6111.72784/tg)+0.15215*log(tg)) qg = eps*esi/(p(i,k)-esi*(1.-eps)) ENDIF clw(i, k) = qnk(i) - qg clw(i, k) = max(0.0, clw(i,k)) tvp(i, k) = max(0., tp(i,k)*(1.+qg/eps-qnk(i))) ! print*,tvp(i,k),'tvp' IF (clw(i,k)<1.E-11) THEN tp(i, k) = tv(i, k) tvp(i, k) = tv(i, k) END IF ! (clw(i,k)<1.E-11) END IF ! (k>=(icbs(i)+1)) END DO ! i = 1, ncum END DO ! k = minorig + 1, nl !---------------------------------------------------------------------------- ! ELSE IF (icvflag_Tpa == 1) THEN ! (icvflag_Tpa == 2) ! !---------------------------------------------------------------------------- ! #ifdef ISO CALL abort_gcm('cv3_routines 1813','isos pas prevus ici',1) #endif DO k = minorig + 1, nl DO i = 1,ncum tp(i,k) = t(i,k) ENDDO !! alv = lv0 - clmcpv*(t(i,k)-273.15) !! alf = lf0 + clmci*(t(i,k)-273.15) !! als = alf + alv DO j = 1,4 DO i = 1, ncum ! ori if(k.ge.(icb(i)+1))then IF (k>=(icbs(i)+1)) THEN ! convect3 tg = tp(i, k) IF (tg .gt. Tx .OR. .NOT.cvflag_ice) THEN es = 6.112*exp(17.67*(tg - 273.15)/(tg + 243.5 - 273.15)) qg = eps*es/(p(i,k)-es*(1.-eps)) dqgdT = lv(i,k)*qg/(rrv*tg*tg) ELSE esi = exp(23.33086-(6111.72784/tg)+0.15215*log(tg)) qg = eps*esi/(p(i,k)-esi*(1.-eps)) dqgdT = (lv(i,k)+lf(i,k))*qg/(rrv*tg*tg) ENDIF IF (qsat_depends_on_qt) THEN dqgdT = dqgdT*(1.-qta(i,k-1))/(1.-qg)**2 qg = qg*(1.-qta(i,k-1))/(1.-qg) ENDIF ahg = (cpd + (cl-cpd)*qta(i,k-1))*tg + lv(i,k)*qg - & lf(i,k)*frac(i,k)*(qta(i,k-1) - qg) + gz(i,k) Tp(i,k) = tg + (ah0(i) - ahg)/ & (cpd + (cl-cpd)*qta(i,k-1) + (lv(i,k)+frac(i,k)*lf(i,k))*dqgdT) !! print *,'undilute2 iterations k, Tp(i,k), ah0(i), ahg ', & !! k, Tp(i,k), ah0(i), ahg END IF ! (k>=(icbs(i)+1)) END DO ! i = 1, ncum END DO ! j = 1,4 DO i = 1, ncum IF (k>=(icbs(i)+1)) THEN ! convect3 tg = tp(i, k) IF (tg .gt. Tx .OR. .NOT.cvflag_ice) THEN es = 6.112*exp(17.67*(tg - 273.15)/(tg + 243.5 - 273.15)) qg = eps*es/(p(i,k)-es*(1.-eps)) ELSE esi = exp(23.33086-(6111.72784/tg)+0.15215*log(tg)) qg = eps*esi/(p(i,k)-esi*(1.-eps)) ENDIF IF (qsat_depends_on_qt) THEN qg = qg*(1.-qta(i,k-1))/(1.-qg) ENDIF qhsat(i,k) = qg END IF ! (k>=(icbs(i)+1)) END DO ! i = 1, ncum DO i = 1, ncum IF (k>=(icbs(i)+1)) THEN ! convect3 clw(i, k) = qta(i,k-1) - qhsat(i,k) clw(i, k) = max(0.0, clw(i,k)) tvp(i, k) = max(0., tp(i,k)*(1.+qhsat(i,k)/eps-qta(i,k-1))) ! print*,tvp(i,k),'tvp' IF (clw(i,k)<1.E-11) THEN tp(i, k) = tv(i, k) tvp(i, k) = tv(i, k) END IF ! (clw(i,k)<1.E-11) END IF ! (k>=(icbs(i)+1)) END DO ! i = 1, ncum ! IF (cvflag_prec_eject) THEN #ifdef ISO CALL abort_physic('cv3_routines>undilute2','isos pas prevus si cvflag_prec_eject',1) #endif DO i = 1, ncum IF (k>=(icbs(i)+1)) THEN ! convect3 ! Specific precipitation (liquid and solid) and ice content ! before ejection of precipitation !!jygprl elacrit = elcrit*min(max(1.-(tp(i,k)-T0)/Tlcrit, 0.), 1.) !!jygprl !!!! qcld(i,k) = min(clw(i,k), elacrit) !!jygprl qhthreshold = elacrit*(1.-qta(i,k-1))/(1.-elacrit) qcld(i,k) = min(clw(i,k), qhthreshold) !!jygprl !!!! phinu2p = max(qhsat(i,k-1) + qcld(i,k-1) - (qhsat(i,k) + qcld(i,k)),0.) !!jygprl phinu2p = max(clw(i,k) - max(qta(i,k-1) - qhsat(i,k-1), qhthreshold), 0.) qpl(i,k) = qpl(i,k-1) + (1.-frac(i,k))*phinu2p !!jygprl qps(i,k) = qps(i,k-1) + frac(i,k) *phinu2p !!jygprl qi(i,k) = (1.-ejectliq)*clw(i,k)*frac(i,k) + & !!jygprl ejectliq*(qps(i,k-1) + frac(i,k)*(phinu2p+qcld(i,k))) !!jygprl !! ! ===================================================================================== ! Ejection of precipitation from adiabatic ascents if requested (cvflag_prec_eject=True): ! Compute the steps of total water (qta), of moist static energy (ha), of specific ! precipitation (qpl and qps) and of specific cloud water (qcld) associated with precipitation ! ejection. ! ===================================================================================== ! ! Verif qpreca(i,k) = ejectliq*qpl(i,k) + ejectice*qps(i,k) !!jygprl frac_a(i,k) = ejectice*qps(i,k)/max(qpreca(i,k),smallestreal) !!jygprl frac_s(i,k) = (1.-ejectliq)*frac(i,k) + & !!jygprl ejectliq*(1. - (qpl(i,k)+(1.-frac(i,k))*qcld(i,k))/max(clw(i,k),smallestreal)) !!jygprl ! denomm1 = 1./(1. - qpreca(i,k)) ! qta(i,k) = qta(i,k-1) - & qpreca(i,k)*(1.-qta(i,k-1))*denomm1 ha(i,k) = ha(i,k-1) + & ( qpreca(i,k)*(-(1.-qta(i,k-1))*(cl-cpd)*tp(i,k) + & lv(i,k)*qhsat(i,k) - lf(i,k)*(frac_s(i,k)*qcld(i,k)+qps(i,k))) + & lf(i,k)*ejectice*qps(i,k))*denomm1 hla(i,k) = hla(i,k-1) + & ( qpreca(i,k)*(-(1.-qta(i,k-1))*(cpv-cpd)*tp(i,k) - & lv(i,k)*((1.-frac_s(i,k))*qcld(i,k)+qpl(i,k)) - & (lv(i,k)+lf(i,k))*(frac_s(i,k)*qcld(i,k)+qps(i,k))) + & lv(i,k)*ejectliq*qpl(i,k) + (lv(i,k)+lf(i,k))*ejectice*qps(i,k))*denomm1 qpl(i,k) = qpl(i,k)*(1.-ejectliq)*denomm1 qps(i,k) = qps(i,k)*(1.-ejectice)*denomm1 qcld(i,k) = qcld(i,k)*denomm1 qhsat(i,k) = qhsat(i,k)*(1.-qta(i,k))/(1.-qta(i,k-1)) END IF ! (k>=(icbs(i)+1)) END DO ! i = 1, ncum ENDIF ! (cvflag_prec_eject) ! END DO ! k = minorig + 1, nl ! !---------------------------------------------------------------------------- ! ELSE IF (icvflag_Tpa == 0) THEN! (icvflag_Tpa == 2) ELSE IF(icvflag_Tpa == 1) ! !---------------------------------------------------------------------------- ! DO k = minorig + 1, nl DO i = 1, ncum ! ori if(k.ge.(icb(i)+1))then IF (k>=(icbs(i)+1)) THEN ! convect3 tg = t(i, k) qg = qs(i, k) ! debug alv=lv0-clmcpv*(t(i,k)-t0) alv = lv0 - clmcpv*(t(i,k)-273.15) ! First iteration. ! ori s=cpd+alv*alv*qg/(rrv*t(i,k)*t(i,k)) s = cpd*(1.-qnk(i)) + cl*qnk(i) + & ! convect3 alv*alv*qg/(rrv*t(i,k)*t(i,k)) ! convect3 s = 1./s ! ori ahg=cpd*tg+(cl-cpd)*qnk(i)*t(i,k)+alv*qg+gz(i,k) ahg = cpd*tg + (cl-cpd)*qnk(i)*tg + alv*qg + gz(i, k) ! convect3 tg = tg + s*(ah0(i)-ahg) ! ori tg=max(tg,35.0) ! debug tc=tg-t0 tc = tg - 273.15 denom = 243.5 + tc denom = max(denom, 1.0) ! convect3 ! ori if(tc.ge.0.0)then es = 6.112*exp(17.67*tc/denom) ! ori else ! ori es=exp(23.33086-6111.72784/tg+0.15215*log(tg)) ! ori endif qg = eps*es/(p(i,k)-es*(1.-eps)) ! qg=max(0.0,qg) ! C Risi ! Second iteration. ! ori s=cpd+alv*alv*qg/(rrv*t(i,k)*t(i,k)) ! ori s=1./s ! ori ahg=cpd*tg+(cl-cpd)*qnk(i)*t(i,k)+alv*qg+gz(i,k) ahg = cpd*tg + (cl-cpd)*qnk(i)*tg + alv*qg + gz(i, k) ! convect3 tg = tg + s*(ah0(i)-ahg) ! ori tg=max(tg,35.0) ! debug tc=tg-t0 tc = tg - 273.15 denom = 243.5 + tc denom = max(denom, 1.0) ! convect3 ! ori if(tc.ge.0.0)then es = 6.112*exp(17.67*tc/denom) ! ori else ! ori es=exp(23.33086-6111.72784/tg+0.15215*log(tg)) ! ori endif qg = eps*es/(p(i,k)-es*(1.-eps)) ! qg=max(0.0,qg) ! C Risi ! debug alv=lv0-clmcpv*(t(i,k)-t0) alv = lv0 - clmcpv*(t(i,k)-273.15) ! print*,'cpd dans convect2 ',cpd ! print*,'tp(i,k),ah0(i),cl,cpd,qnk(i),t(i,k),gz(i,k),alv,qg,cpd' ! print*,tp(i,k),ah0(i),cl,cpd,qnk(i),t(i,k),gz(i,k),alv,qg,cpd ! ori c approximation here: ! ori tp(i,k)=(ah0(i)-(cl-cpd)*qnk(i)*t(i,k)-gz(i,k)-alv*qg)/cpd ! convect3: no approximation: IF (cvflag_ice) THEN tp(i, k) = max(0., (ah0(i)-gz(i,k)-alv*qg)/(cpd+(cl-cpd)*qnk(i))) ELSE tp(i, k) = (ah0(i)-gz(i,k)-alv*qg)/(cpd+(cl-cpd)*qnk(i)) END IF clw(i, k) = qnk(i) - qg clw(i, k) = max(0.0, clw(i,k)) rg = qg/(1.-qnk(i)) ! ori tvp(i,k)=tp(i,k)*(1.+rg*epsi) ! convect3: (qg utilise au lieu du vrai mixing ratio rg): tvp(i, k) = tp(i, k)*(1.+qg/eps-qnk(i)) ! whole thing IF (cvflag_ice) THEN IF (clw(i,k)<1.E-11) THEN tp(i, k) = tv(i, k) tvp(i, k) = tv(i, k) END IF END IF !jyg< !! END IF ! Endif moved to the end of the loop !>jyg IF (cvflag_ice) THEN !CR:attention boucle en klon dans Icefrac ! Call Icefrac(t,clw,qi,nl,nloc) IF (t(i,k)>263.15) THEN qi(i, k) = 0. ELSE IF (t(i,k)<243.15) THEN qi(i, k) = clw(i, k) ELSE fracg = (263.15-t(i,k))/20 qi(i, k) = clw(i, k)*fracg END IF END IF !CR: fin test IF (t(i,k)<263.15) THEN !CR: on commente les calculs d'Arnaud car division par zero ! nouveau calcul propose par JYG ! alv=lv0-clmcpv*(t(i,k)-273.15) ! alf=lf0-clmci*(t(i,k)-273.15) ! tg=tp(i,k) ! tc=tp(i,k)-273.15 ! denom=243.5+tc ! do j=1,3 ! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! il faudra que esi vienne en argument de la convection ! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! tbis=t(i,k)+(tp(i,k)-tg) ! esi=exp(23.33086-(6111.72784/tbis) + & ! 0.15215*log(tbis)) ! qsat_new=eps*esi/(p(i,k)-esi*(1.-eps)) ! snew=cpd*(1.-qnk(i))+cl*qnk(i)+alv*alv*qsat_new/ & ! (rrv*tbis*tbis) ! snew=1./snew ! print*,esi,qsat_new,snew,'esi,qsat,snew' ! tp(i,k)=tg+(alf*qi(i,k)+alv*qg*(1.-(esi/es)))*snew ! print*,k,tp(i,k),qnk(i),'avec glace' ! print*,'tpNAN',tg,alf,qi(i,k),alv,qg,esi,es,snew ! enddo alv = lv0 - clmcpv*(t(i,k)-273.15) alf = lf0 + clmci*(t(i,k)-273.15) als = alf + alv tg = tp(i, k) tp(i, k) = t(i, k) DO j = 1, 3 esi = exp(23.33086-(6111.72784/tp(i,k))+0.15215*log(tp(i,k))) qsat_new = eps*esi/(p(i,k)-esi*(1.-eps)) snew = cpd*(1.-qnk(i)) + cl*qnk(i) + alv*als*qsat_new/ & (rrv*tp(i,k)*tp(i,k)) snew = 1./snew ! c print*,esi,qsat_new,snew,'esi,qsat,snew' tp(i, k) = tp(i, k) + & ((cpd*(1.-qnk(i))+cl*qnk(i))*(tg-tp(i,k)) + & alv*(qg-qsat_new)+alf*qi(i,k))*snew ! print*,k,tp(i,k),qsat_new,qnk(i),qi(i,k), & ! 'k,tp,q,qt,qi avec glace' END DO !CR:reprise du code AJ clw(i, k) = qnk(i) - qsat_new clw(i, k) = max(0.0, clw(i,k)) tvp(i, k) = max(0., tp(i,k)*(1.+qsat_new/eps-qnk(i))) ! print*,tvp(i,k),'tvp' END IF IF (clw(i,k)<1.E-11) THEN tp(i, k) = tv(i, k) tvp(i, k) = tv(i, k) END IF END IF ! (cvflag_ice) !jyg< END IF ! (k>=(icbs(i)+1)) !>jyg END DO #ifdef ISO ! calcul de zfice do i=1,ncum zfice(i) = 1.0-(t(i,k)-pxtice)/(pxtmelt-pxtice) zfice(i) = MIN(MAX(zfice(i),0.0),1.0) enddo do i=1,ncum clw_k(i)=clw(i,k) tg_k(i)=t(i,k) enddo !do i=1,ncum #ifdef ISOVERIF do i=1,ncum call iso_verif_noNaN(qnk(i),'cv3_routines 1423') do ixt=1,ntraciso call iso_verif_noNaN(xtnk(ixt,i),'cv3_routines 1423b') enddo !do ixt=1,ntraciso enddo !do i=1,ncum #endif #ifdef ISOVERIF !write(*,*) 'cv3_routine 1259: avant condiso' do i=1,ncum if (iso_HDO.gt.0) then call iso_verif_aberrant(xtnk(iso_hdo,i)/qnk(i), & & 'cv3_routines 1231') endif !if (iso_HDO.gt.0) then call iso_verif_positif(qnk(i)-clw_k(i), & & 'cv3_routines 1336') enddo #ifdef ISOTRAC do i=1,ncum call iso_verif_traceur(xt_k(1,i),'cv3_routines 1251') call iso_verif_positif(qnk(i)-clw_k(i),'cv3_routines 1275') call iso_verif_positif(tg_k(i)-20.0,'cv3_routines 1297') enddo !do i=1,ncum #endif #endif call condiso_liq_ice_vectall(xtnk(1,1),qnk(1), & & clw_k(1),tg_k(1), & & zfice(1),zxtice(1,1),zxtliq(1,1),ncum) #ifdef ISOTRAC #ifdef ISOVERIF ! write(*,*) 'cv3_routines 1283: condiso pour traceurs' #endif call condiso_liq_ice_vectall_trac(xtnk(1,1),qnk(1), & & clw_k(1),tg_k(1), & & zfice(1),zxtice(1,1),zxtliq(1,1),ncum) #endif do i=1,ncum do ixt=1,ntraciso xtclw(ixt,i,k)=zxtice(ixt,i)+zxtliq(ixt,i) xtclw(ixt,i,k)=max(0.0,xtclw(ixt,i,k)) enddo !do ixt=1,niso enddo !do i=1,ncum #ifdef ISOVERIF if (iso_eau.gt.0) then do i=1,ncum call iso_verif_egalite_choix(xtclw(iso_eau,i,k), & & clw(i,k),'cv3_routines 1223',errmax,errmaxrel) enddo endif !if (iso_eau.gt.0) then #ifdef ISOTRAC do i=1,ncum call iso_verif_traceur(xtclw(1,i,k),'cv3_routines 1275') enddo #endif #endif #endif END DO !---------------------------------------------------------------------------- ! ENDIF ! (icvflag_Tpa == 2) ELSEIF (icvflag_Tpa == 1) ELSE (icvflag_Tpa == 0) #ifdef ISOVERIF DO k = 1, nl DO i = 1,ncum call iso_verif_egalite(xtta(iso_eau,i,k),qta(i,k), & & 'cv3_undilute2 2182') enddo enddo #endif ! !---------------------------------------------------------------------------- ! ! ===================================================================== ! --- SET THE PRECIPITATION EFFICIENCIES ! --- THESE MAY BE FUNCTIONS OF TP(I), P(I) AND CLW(I) ! ===================================================================== ! IF (flag_epkeorig/=1) THEN DO k = 1, nl ! convect3 DO i = 1, ncum !jyg< IF(k>=icb(i)) THEN !>jyg pden = ptcrit - pbcrit ep(i, k) = (plcl(i)-p(i,k)-pbcrit)/pden*epmax ep(i, k) = max(ep(i,k), 0.0) ep(i, k) = min(ep(i,k), epmax) !! sigp(i, k) = spfac ! jyg ENDIF ! (k>=icb(i)) END DO END DO ELSE DO k = 1, nl DO i = 1, ncum IF(k>=icb(i)) THEN !! IF (k>=(nk(i)+1)) THEN !>jyg tca = tp(i, k) - t0 IF (tca>=0.0) THEN elacrit = elcrit ELSE elacrit = elcrit*(1.0-tca/tlcrit) END IF elacrit = max(elacrit, 0.0) ep(i, k) = 1.0 - elacrit/max(clw(i,k), 1.0E-8) ep(i, k) = max(ep(i,k), 0.0) ep(i, k) = min(ep(i,k), epmax) !! sigp(i, k) = spfac ! jyg END IF ! (k>=icb(i)) END DO END DO END IF ! ! ========================================================================= IF (prt_level >= 10) THEN print *,'cv3_undilute2.1. tp(1,k), tvp(1,k) ', & (k, tp(1,k), tvp(1,k), k = 1,nl) ENDIF ! ! ===================================================================== ! --- CALCULATE VIRTUAL TEMPERATURE AND LIFTED PARCEL ! --- VIRTUAL TEMPERATURE ! ===================================================================== ! dans convect3, tvp est calcule en une seule fois, et sans retirer ! l'eau condensee (~> reversible CAPE) ! ori do 340 k=minorig+1,nl ! ori do 330 i=1,ncum ! ori if(k.ge.(icb(i)+1))then ! ori tvp(i,k)=tvp(i,k)*(1.0-qnk(i)+ep(i,k)*clw(i,k)) ! oric print*,'i,k,tvp(i,k),qnk(i),ep(i,k),clw(i,k)' ! oric print*, i,k,tvp(i,k),qnk(i),ep(i,k),clw(i,k) ! ori endif ! ori 330 continue ! ori 340 continue ! ori do 350 i=1,ncum ! ori tvp(i,nlp)=tvp(i,nl)-(gz(i,nlp)-gz(i,nl))/cpd ! ori 350 continue DO i = 1, ncum ! convect3 tp(i, nlp) = tp(i, nl) ! convect3 END DO ! convect3 ! ===================================================================== ! --- EFFECTIVE VERTICAL PROFILE OF BUOYANCY (convect3 only): ! ===================================================================== ! -- this is for convect3 only: ! first estimate of buoyancy: !jyg : k-loop outside i-loop (07042015) DO k = 1, nl DO i = 1, ncum buoy(i, k) = tvp(i, k) - tv(i, k) END DO END DO ! set buoyancy=buoybase for all levels below base ! for safety, set buoy(icb)=buoybase !jyg : k-loop outside i-loop (07042015) DO k = 1, nl DO i = 1, ncum IF ((k>=icb(i)) .AND. (k<=nl) .AND. (p(i,k)>=pbase(i))) THEN buoy(i, k) = buoybase(i) END IF END DO END DO DO i = 1, ncum ! buoy(icb(i),k)=buoybase(i) buoy(i, icb(i)) = buoybase(i) END DO ! -- end convect3 ! ===================================================================== ! --- FIND THE FIRST MODEL LEVEL (INB) ABOVE THE PARCEL'S ! --- LEVEL OF NEUTRAL BUOYANCY ! ===================================================================== ! -- this is for convect3 only: DO i = 1, ncum inb(i) = nl - 1 iposit(i) = nl END DO ! -- iposit(i) = first level, above icb, with positive buoyancy DO k = 1, nl - 1 DO i = 1, ncum IF (k>=icb(i) .AND. buoy(i,k)>0.) THEN iposit(i) = min(iposit(i), k) END IF END DO END DO DO i = 1, ncum IF (iposit(i)==nl) THEN iposit(i) = icb(i) END IF END DO DO k = 1, nl - 1 DO i = 1, ncum IF ((k>=iposit(i)) .AND. (buoy(i,k)=iposit(i))) THEN deltap = min(plcl(i), ph(i,k-1)) - min(plcl(i), ph(i,k)) cape(i) = cape(i) + rrd*buoy(i, k-1)*deltap/p(i, k-1) IF (cape(i).gt.0.) THEN inb(i) = max(inb(i), k) END IF ENDIF ENDDO ENDDO ! DO i = 1, ncum ! print*,"inb",inb(i) ! ENDDO endif ! -- end convect3 ! ori do 510 i=1,ncum ! ori cape(i)=0.0 ! ori capem(i)=0.0 ! ori inb(i)=icb(i)+1 ! ori inb1(i)=inb(i) ! ori 510 continue ! Originial Code ! do 530 k=minorig+1,nl-1 ! do 520 i=1,ncum ! if(k.ge.(icb(i)+1))then ! by=(tvp(i,k)-tv(i,k))*dph(i,k)/p(i,k) ! byp=(tvp(i,k+1)-tv(i,k+1))*dph(i,k+1)/p(i,k+1) ! cape(i)=cape(i)+by ! if(by.ge.0.0)inb1(i)=k+1 ! if(cape(i).gt.0.0)then ! inb(i)=k+1 ! capem(i)=cape(i) ! endif ! endif !520 continue !530 continue ! do 540 i=1,ncum ! byp=(tvp(i,nl)-tv(i,nl))*dph(i,nl)/p(i,nl) ! cape(i)=capem(i)+byp ! defrac=capem(i)-cape(i) ! defrac=max(defrac,0.001) ! frac(i)=-cape(i)/defrac ! frac(i)=min(frac(i),1.0) ! frac(i)=max(frac(i),0.0) !540 continue ! K Emanuel fix ! call zilch(byp,ncum) ! do 530 k=minorig+1,nl-1 ! do 520 i=1,ncum ! if(k.ge.(icb(i)+1))then ! by=(tvp(i,k)-tv(i,k))*dph(i,k)/p(i,k) ! cape(i)=cape(i)+by ! if(by.ge.0.0)inb1(i)=k+1 ! if(cape(i).gt.0.0)then ! inb(i)=k+1 ! capem(i)=cape(i) ! byp(i)=(tvp(i,k+1)-tv(i,k+1))*dph(i,k+1)/p(i,k+1) ! endif ! endif !520 continue !530 continue ! do 540 i=1,ncum ! inb(i)=max(inb(i),inb1(i)) ! cape(i)=capem(i)+byp(i) ! defrac=capem(i)-cape(i) ! defrac=max(defrac,0.001) ! frac(i)=-cape(i)/defrac ! frac(i)=min(frac(i),1.0) ! frac(i)=max(frac(i),0.0) !540 continue ! J Teixeira fix ! ori call zilch(byp,ncum) ! ori do 515 i=1,ncum ! ori lcape(i)=.true. ! ori 515 continue ! ori do 530 k=minorig+1,nl-1 ! ori do 520 i=1,ncum ! ori if(cape(i).lt.0.0)lcape(i)=.false. ! ori if((k.ge.(icb(i)+1)).and.lcape(i))then ! ori by=(tvp(i,k)-tv(i,k))*dph(i,k)/p(i,k) ! ori byp(i)=(tvp(i,k+1)-tv(i,k+1))*dph(i,k+1)/p(i,k+1) ! ori cape(i)=cape(i)+by ! ori if(by.ge.0.0)inb1(i)=k+1 ! ori if(cape(i).gt.0.0)then ! ori inb(i)=k+1 ! ori capem(i)=cape(i) ! ori endif ! ori endif ! ori 520 continue ! ori 530 continue ! ori do 540 i=1,ncum ! ori cape(i)=capem(i)+byp(i) ! ori defrac=capem(i)-cape(i) ! ori defrac=max(defrac,0.001) ! ori frac(i)=-cape(i)/defrac ! ori frac(i)=min(frac(i),1.0) ! ori frac(i)=max(frac(i),0.0) ! ori 540 continue ! -------------------------------------------------------------------- ! Prevent convection when top is too hot ! -------------------------------------------------------------------- DO i = 1,ncum IF (t(i,inb(i)) > T_top_max) iflag(i) = 10 ENDDO ! ===================================================================== ! --- CALCULATE LIQUID WATER STATIC ENERGY OF LIFTED PARCEL ! ===================================================================== DO k = 1, nl DO i = 1, ncum hp(i, k) = h(i, k) END DO END DO !jyg : cvflag_ice test outside the loops (07042015) ! IF (cvflag_ice) THEN ! IF (cvflag_prec_eject) THEN !! DO k = minorig + 1, nl !! DO i = 1, ncum !! IF ((k>=icb(i)) .AND. (k<=inb(i))) THEN !! frac_s(i,k) = qi(i,k)/max(clw(i,k),smallestreal) !! frac_s(i,k) = 1. - (qpl(i,k)+(1.-frac_s(i,k))*qcld(i,k))/max(clw(i,k),smallestreal) !! END IF !! END DO !! END DO ELSE ! (cvflag_prec_eject) DO k = minorig + 1, nl DO i = 1, ncum IF ((k>=icb(i)) .AND. (k<=inb(i))) THEN !jyg< frac computation moved to beginning of cv3_undilute2. ! kept here for compatibility test with CMip6 version frac_s(i, k) = 1. - (t(i,k)-243.15)/(263.15-243.15) frac_s(i, k) = min(max(frac_s(i,k),0.0), 1.0) END IF END DO END DO ENDIF ! (cvflag_prec_eject) ELSE DO k = minorig + 1, nl DO i = 1, ncum IF ((k>=icb(i)) .AND. (k<=inb(i))) THEN !! hp(i, k) = hnk(i) + (lv(i,k)+(cpd-cpv)*t(i,k)+frac_s(i,k)*lf(i,k))* & !!jygprl !! ep(i, k)*clw(i, k) !!jygprl hp(i, k) = hla(i,k-1) + (lv(i,k)+(cpd-cpv)*t(i,k)+frac_s(i,k)*lf(i,k))* & !!jygprl ep(i, k)*clw(i, k) !!jygprl END IF END DO END DO ! ELSE ! (cvflag_ice) ! DO k = minorig + 1, nl DO i = 1, ncum IF ((k>=icb(i)) .AND. (k<=inb(i))) THEN !jyg< (energy conservation tests) !! hp(i, k) = hnk(i) + (lv(i,k)+(cpd-cpv)*tp(i,k))*ep(i, k)*clw(i, k) !! hp(i, k) = ( hnk(i) + (lv(i,k)+(cpd-cpv)*t(i,k))*ep(i, k)*clw(i, k) ) / & !! (1. - ep(i,k)*clw(i,k)) !! hp(i, k) = ( hnk(i) + (lv(i,k)+(cpd-cl)*t(i,k))*ep(i, k)*clw(i, k) ) / & !! (1. - ep(i,k)*clw(i,k)) hp(i, k) = hnk(i) + (lv(i,k)+(cpd-cpv)*t(i,k))*ep(i, k)*clw(i, k) END IF END DO END DO ! END IF ! (cvflag_ice) RETURN END SUBROUTINE cv3_undilute2 SUBROUTINE cv3_closure(nloc, ncum, nd, icb, inb, & pbase, p, ph, tv, buoy, & sig, w0, cape, m, iflag) IMPLICIT NONE ! =================================================================== ! --- CLOSURE OF CONVECT3 ! ! vectorization: S. Bony ! =================================================================== include "cvthermo.h" include "cv3param.h" !input: INTEGER ncum, nd, nloc INTEGER icb(nloc), inb(nloc) REAL pbase(nloc) REAL p(nloc, nd), ph(nloc, nd+1) REAL tv(nloc, nd), buoy(nloc, nd) !input/output: REAL sig(nloc, nd), w0(nloc, nd) INTEGER iflag(nloc) !output: REAL cape(nloc) REAL m(nloc, nd) !local variables: INTEGER i, j, k, icbmax REAL deltap, fac, w, amu REAL dtmin(nloc, nd), sigold(nloc, nd) REAL cbmflast(nloc) ! ------------------------------------------------------- ! -- Initialization ! ------------------------------------------------------- DO k = 1, nl DO i = 1, ncum m(i, k) = 0.0 END DO END DO ! ------------------------------------------------------- ! -- Reset sig(i) and w0(i) for i>inb and i=(inb(i)+1))) THEN sig(i, k) = beta*sig(i, k) + & 2.*alpha*buoy(i, inb(i))*abs(buoy(i,inb(i))) sig(i, k) = amax1(sig(i,k), 0.0) w0(i, k) = beta*w0(i, k) END IF END DO END DO ! compute icbmax: icbmax = 2 DO i = 1, ncum icbmax = max(icbmax, icb(i)) END DO ! update sig and w0 below cloud base: DO k = 1, icbmax DO i = 1, ncum IF (k<=icb(i)) THEN sig(i, k) = beta*sig(i, k) - & 2.*alpha*buoy(i, icb(i))*buoy(i, icb(i)) sig(i, k) = max(sig(i,k), 0.0) w0(i, k) = beta*w0(i, k) END IF END DO END DO !! if(inb.lt.(nl-1))then !! do 85 i=inb+1,nl-1 !! sig(i)=beta*sig(i)+2.*alpha*buoy(inb)* !! 1 abs(buoy(inb)) !! sig(i)=max(sig(i),0.0) !! w0(i)=beta*w0(i) !! 85 continue !! end if !! do 87 i=1,icb !! sig(i)=beta*sig(i)-2.*alpha*buoy(icb)*buoy(icb) !! sig(i)=max(sig(i),0.0) !! w0(i)=beta*w0(i) !! 87 continue ! ------------------------------------------------------------- ! -- Reset fractional areas of updrafts and w0 at initial time ! -- and after 10 time steps of no convection ! ------------------------------------------------------------- DO k = 1, nl - 1 DO i = 1, ncum IF (sig(i,nd)<1.5 .OR. sig(i,nd)>12.0) THEN sig(i, k) = 0.0 w0(i, k) = 0.0 END IF END DO END DO ! ------------------------------------------------------------- ! -- Calculate convective available potential energy (cape), ! -- vertical velocity (w), fractional area covered by ! -- undilute updraft (sig), and updraft mass flux (m) ! ------------------------------------------------------------- DO i = 1, ncum cape(i) = 0.0 END DO ! compute dtmin (minimum buoyancy between ICB and given level k): DO i = 1, ncum DO k = 1, nl dtmin(i, k) = 100.0 END DO END DO DO i = 1, ncum DO k = 1, nl DO j = minorig, nl IF ((k>=(icb(i)+1)) .AND. (k<=inb(i)) .AND. (j>=icb(i)) .AND. (j<=(k-1))) THEN dtmin(i, k) = amin1(dtmin(i,k), buoy(i,j)) END IF END DO END DO END DO ! the interval on which cape is computed starts at pbase : DO k = 1, nl DO i = 1, ncum IF ((k>=(icb(i)+1)) .AND. (k<=inb(i))) THEN deltap = min(pbase(i), ph(i,k-1)) - min(pbase(i), ph(i,k)) cape(i) = cape(i) + rrd*buoy(i, k-1)*deltap/p(i, k-1) cape(i) = amax1(0.0, cape(i)) sigold(i, k) = sig(i, k) ! dtmin(i,k)=100.0 ! do 97 j=icb(i),k-1 ! mauvaise vectorisation ! dtmin(i,k)=AMIN1(dtmin(i,k),buoy(i,j)) ! 97 continue sig(i, k) = beta*sig(i, k) + alpha*dtmin(i, k)*abs(dtmin(i,k)) sig(i, k) = max(sig(i,k), 0.0) sig(i, k) = amin1(sig(i,k), 0.01) fac = amin1(((dtcrit-dtmin(i,k))/dtcrit), 1.0) w = (1.-beta)*fac*sqrt(cape(i)) + beta*w0(i, k) amu = 0.5*(sig(i,k)+sigold(i,k))*w m(i, k) = amu*0.007*p(i, k)*(ph(i,k)-ph(i,k+1))/tv(i, k) w0(i, k) = w END IF END DO END DO DO i = 1, ncum w0(i, icb(i)) = 0.5*w0(i, icb(i)+1) m(i, icb(i)) = 0.5*m(i, icb(i)+1)*(ph(i,icb(i))-ph(i,icb(i)+1))/(ph(i,icb(i)+1)-ph(i,icb(i)+2)) sig(i, icb(i)) = sig(i, icb(i)+1) sig(i, icb(i)-1) = sig(i, icb(i)) END DO ! ccc 3. Compute final cloud base mass flux and set iflag to 3 if ! ccc cloud base mass flux is exceedingly small and is decreasing (i.e. if ! ccc the final mass flux (cbmflast) is greater than the target mass flux ! ccc (cbmf) ??). ! cc ! c do i = 1,ncum ! c cbmflast(i) = 0. ! c enddo ! cc ! c do k= 1,nl ! c do i = 1,ncum ! c IF (k .ge. icb(i) .and. k .le. inb(i)) THEN ! c cbmflast(i) = cbmflast(i)+M(i,k) ! c ENDIF ! c enddo ! c enddo ! cc ! c do i = 1,ncum ! c IF (cbmflast(i) .lt. 1.e-6) THEN ! c iflag(i) = 3 ! c ENDIF ! c enddo ! cc ! c do k= 1,nl ! c do i = 1,ncum ! c IF (iflag(i) .ge. 3) THEN ! c M(i,k) = 0. ! c sig(i,k) = 0. ! c w0(i,k) = 0. ! c ENDIF ! c enddo ! c enddo ! cc !! cape=0.0 !! do 98 i=icb+1,inb !! deltap = min(pbase,ph(i-1))-min(pbase,ph(i)) !! cape=cape+rrd*buoy(i-1)*deltap/p(i-1) !! dcape=rrd*buoy(i-1)*deltap/p(i-1) !! dlnp=deltap/p(i-1) !! cape=max(0.0,cape) !! sigold=sig(i) !! dtmin=100.0 !! do 97 j=icb,i-1 !! dtmin=amin1(dtmin,buoy(j)) !! 97 continue !! sig(i)=beta*sig(i)+alpha*dtmin*abs(dtmin) !! sig(i)=max(sig(i),0.0) !! sig(i)=amin1(sig(i),0.01) !! fac=amin1(((dtcrit-dtmin)/dtcrit),1.0) !! w=(1.-beta)*fac*sqrt(cape)+beta*w0(i) !! amu=0.5*(sig(i)+sigold)*w !! m(i)=amu*0.007*p(i)*(ph(i)-ph(i+1))/tv(i) !! w0(i)=w !! 98 continue !! w0(icb)=0.5*w0(icb+1) !! m(icb)=0.5*m(icb+1)*(ph(icb)-ph(icb+1))/(ph(icb+1)-ph(icb+2)) !! sig(icb)=sig(icb+1) !! sig(icb-1)=sig(icb) RETURN END SUBROUTINE cv3_closure SUBROUTINE cv3_mixing(nloc, ncum, nd, na, ntra, icb, nk, inb, & ph, t, rr, rs, u, v, tra, h, lv, lf, frac, qnk, & unk, vnk, hp, tv, tvp, ep, clw, m, sig, & ment, qent, uent, vent, nent, sij, elij, ments, qents, traent & #ifdef ISO & ,xt,xtnk,xtclw & & ,xtent,xtelij & #endif & ) #ifdef ISO use infotrac_phy, ONLY: ntraciso=>ntiso,niso,itZonIso USE isotopes_mod, ONLY: pxtmelt,pxtice,pxtmin,pxtmax, iso_eau,iso_HDO, & ridicule USE isotopes_routines_mod, ONLY: condiso_liq_ice_vectall #ifdef ISOVERIF use isotopes_verif_mod, ONLY: errmax,errmaxrel,deltalim, & iso_verif_egalite_choix,iso_verif_aberrant_choix, iso_verif_noNaN,& iso_verif_aberrant, & iso_verif_egalite,iso_verif_egalite_choix_nostop,iso_verif_positif_nostop, & iso_verif_egalite_nostop,iso_verif_positif #endif #ifdef ISOTRAC use isotrac_mod, only: option_tmin,option_traceurs,seuil_tag_tmin, & & option_cond,index_zone,izone_cond,index_iso use isotrac_routines_mod, only: iso_recolorise_condensation use isotopes_routines_mod, only: condiso_liq_ice_vectall_trac #ifdef ISOVERIF use isotopes_verif_mod, ONLY: iso_verif_trac17_q_deltad,iso_verif_traceur, & & iso_verif_traceur_justmass #endif #endif #endif IMPLICIT NONE ! --------------------------------------------------------------------- ! a faire: ! - vectorisation de la partie normalisation des flux (do 789...) ! --------------------------------------------------------------------- include "cvthermo.h" include "cv3param.h" include "cvflag.h" !inputs: INTEGER, INTENT (IN) :: ncum, nd, na, ntra, nloc INTEGER, DIMENSION (nloc), INTENT (IN) :: icb, inb, nk REAL, DIMENSION (nloc, nd), INTENT (IN) :: sig REAL, DIMENSION (nloc), INTENT (IN) :: qnk, unk, vnk REAL, DIMENSION (nloc, nd+1), INTENT (IN) :: ph REAL, DIMENSION (nloc, nd), INTENT (IN) :: t, rr, rs REAL, DIMENSION (nloc, nd), INTENT (IN) :: u, v REAL, DIMENSION (nloc, nd, ntra), INTENT (IN) :: tra ! input of convect3 REAL, DIMENSION (nloc, na), INTENT (IN) :: lv, h, hp REAL, DIMENSION (nloc, na), INTENT (IN) :: lf, frac REAL, DIMENSION (nloc, na), INTENT (IN) :: tv, tvp, ep, clw REAL, DIMENSION (nloc, na), INTENT (IN) :: m ! input of convect3 #ifdef ISO !integer niso real xt(ntraciso,nloc,na), xtclw(ntraciso,nloc,na) real xtnk(ntraciso,nloc) #endif !outputs: REAL, DIMENSION (nloc, na, na), INTENT (OUT) :: ment, qent REAL, DIMENSION (nloc, na, na), INTENT (OUT) :: uent, vent REAL, DIMENSION (nloc, na, na), INTENT (OUT) :: sij, elij REAL, DIMENSION (nloc, nd, nd, ntra), INTENT (OUT) :: traent REAL, DIMENSION (nloc, nd, nd), INTENT (OUT) :: ments, qents INTEGER, DIMENSION (nloc, nd), INTENT (OUT) :: nent #ifdef ISO real xtent(ntraciso,nloc,nd,nd) real xtelij(ntraciso,nloc,nd,nd) #endif !local variables: INTEGER i, j, k, il, im, jm INTEGER num1, num2 REAL rti, bf2, anum, denom, dei, altem, cwat, stemp, qp REAL alt, smid, sjmin, sjmax, delp, delm REAL asij(nloc), smax(nloc), scrit(nloc) REAL asum(nloc, nd), bsum(nloc, nd), csum(nloc, nd) REAL sigij(nloc, nd, nd) REAL wgh REAL zm(nloc, na) LOGICAL lwork(nloc) #ifdef ISO integer ixt real xtrti(ntraciso,nloc) real xtres(ntraciso) ! on ajoute la dimension nloc a xtrti pour verifs dans les tags: 5 fev ! 2010 real zfice(nloc),zxtliq(ntraciso,nloc),zxtice(ntraciso,nloc) ! real xt_reduit(ntraciso) ! logical negation !#ifdef ISOVERIF ! integer iso_verif_positif_nostop ! integer iso_verif_egalite_nostop ! integer iso_verif_egalite_choix_nostop !#endif #endif ! ===================================================================== ! --- INITIALIZE VARIOUS ARRAYS USED IN THE COMPUTATIONS ! ===================================================================== #ifdef ISO #ifdef ISOVERIF ! write(*,*) 'cv3_routines 1820: entree dans cv3_mixing' do i=minorig+1,nl do il=1,ncum call iso_verif_noNaN(m(il,i),'cv3_routines 2041') enddo enddo #endif #endif ! ori do 360 i=1,ncum*nlp DO j = 1, nl DO i = 1, ncum nent(i, j) = 0 ! in convect3, m is computed in cv3_closure ! ori m(i,1)=0.0 END DO END DO ! ori do 400 k=1,nlp ! ori do 390 j=1,nlp DO j = 1, nl DO k = 1, nl DO i = 1, ncum qent(i, k, j) = rr(i, j) uent(i, k, j) = u(i, j) vent(i, k, j) = v(i, j) elij(i, k, j) = 0.0 #ifdef ISO do ixt =1,ntraciso xtent(ixt,i,k,j)=xt(ixt,i,j) xtelij(ixt,i,k,j)=0.0 enddo !do ixt =1,ntraciso #endif !ym ment(i,k,j)=0.0 !ym sij(i,k,j)=0.0 END DO END DO END DO !ym ment(1:ncum, 1:nd, 1:nd) = 0.0 sij(1:ncum, 1:nd, 1:nd) = 0.0 !AC! do k=1,ntra !AC! do j=1,nd ! instead nlp !AC! do i=1,nd ! instead nlp !AC! do il=1,ncum !AC! traent(il,i,j,k)=tra(il,j,k) !AC! enddo !AC! enddo !AC! enddo !AC! enddo zm(:, :) = 0. ! ===================================================================== ! --- CALCULATE ENTRAINED AIR MASS FLUX (ment), TOTAL WATER MIXING ! --- RATIO (QENT), TOTAL CONDENSED WATER (elij), AND MIXING ! --- FRACTION (sij) ! ===================================================================== DO i = minorig + 1, nl DO j = minorig, nl DO il = 1, ncum IF ((i>=icb(il)) .AND. (i<=inb(il)) .AND. (j>=(icb(il)-1)) .AND. (j<=inb(il))) THEN rti = qnk(il) - ep(il, i)*clw(il, i) bf2 = 1. + lv(il, j)*lv(il, j)*rs(il, j)/(rrv*t(il,j)*t(il,j)*cpd) IF (cvflag_ice) THEN ! print*,cvflag_ice,'cvflag_ice dans do 700' IF (t(il,j)<=263.15) THEN bf2 = 1. + (lf(il,j)+lv(il,j))*(lv(il,j)+frac(il,j)* & lf(il,j))*rs(il, j)/(rrv*t(il,j)*t(il,j)*cpd) END IF END IF anum = h(il, j) - hp(il, i) + (cpv-cpd)*t(il, j)*(rti-rr(il,j)) denom = h(il, i) - hp(il, i) + (cpd-cpv)*(rr(il,i)-rti)*t(il, j) dei = denom IF (abs(dei)<0.01) dei = 0.01 sij(il, i, j) = anum/dei sij(il, i, i) = 1.0 altem = sij(il, i, j)*rr(il, i) + (1.-sij(il,i,j))*rti - rs(il, j) altem = altem/bf2 cwat = clw(il, j)*(1.-ep(il,j)) stemp = sij(il, i, j) IF ((stemp<0.0 .OR. stemp>1.0 .OR. altem>cwat) .AND. j>i) THEN IF (cvflag_ice) THEN anum = anum - (lv(il,j)+frac(il,j)*lf(il,j))*(rti-rs(il,j)-cwat*bf2) denom = denom + (lv(il,j)+frac(il,j)*lf(il,j))*(rr(il,i)-rti) ELSE anum = anum - lv(il, j)*(rti-rs(il,j)-cwat*bf2) denom = denom + lv(il, j)*(rr(il,i)-rti) END IF IF (abs(denom)<0.01) denom = 0.01 sij(il, i, j) = anum/denom altem = sij(il, i, j)*rr(il, i) + (1.-sij(il,i,j))*rti - rs(il, j) altem = altem - (bf2-1.)*cwat END IF IF (sij(il,i,j)>0.0 .AND. sij(il,i,j)<0.95) THEN qent(il, i, j) = sij(il, i, j)*rr(il, i) + (1.-sij(il,i,j))*rti uent(il, i, j) = sij(il, i, j)*u(il, i) + (1.-sij(il,i,j))*unk(il) vent(il, i, j) = sij(il, i, j)*v(il, i) + (1.-sij(il,i,j))*vnk(il) !!!! do k=1,ntra !!!! traent(il,i,j,k)=sij(il,i,j)*tra(il,i,k) !!!! : +(1.-sij(il,i,j))*tra(il,nk(il),k) !!!! end do elij(il, i, j) = altem elij(il, i, j) = max(0.0, elij(il,i,j)) ment(il, i, j) = m(il, i)/(1.-sij(il,i,j)) nent(il, i) = nent(il, i) + 1 END IF sij(il, i, j) = max(0.0, sij(il,i,j)) sij(il, i, j) = amin1(1.0, sij(il,i,j)) END IF ! new END DO #ifdef ISO do il=1,ncum zfice(il) = 1.0-(t(il,j)-pxtice)/(pxtmelt-pxtice) zfice(il) = MIN(MAX(zfice(il),0.0),1.0) if( (i.ge.icb(il)).and.(i.le.inb(il)).and. & & (j.ge.(icb(il)-1)).and.(j.le.inb(il)))then do ixt=1,ntraciso ! xtrti(ixt)=xt(ixt,il,1)-xtep(ixt,il,i)*xtclw(ixt,il,i) ! le 7 mai: on supprime xtep xtrti(ixt,il)=xtnk(ixt,il)-ep(il,i)*xtclw(ixt,il,i) enddo if(sij(il,i,j).gt.0.0.and.sij(il,i,j).lt.0.95)then ! temperature of condensation (within mixtures): ! tcond(il)=t(il,j) ! : + ( sij(il,i,j)*rr(il,i)+(1.-sij(il,i,j))*rti ! : - elij(il,i,j) - rs(il,j) ) ! : / ( cpd*(bf2-1.0)/lv(il,j) ) do ixt = 1, ntraciso ! total mixing ratio in the mixtures before precipitation: xtent(ixt,il,i,j)=sij(il,i,j)*xt(ixt,il,i) & & +(1.-sij(il,i,j))*xtrti(ixt,il) enddo !do ixt = 1, ntraciso endif !if(sij(il,i,j).gt.0.0.and.sij(il,i,j).lt.0.95)then endif !if( (i.ge.icb(il)).and.(i.le.inb(il)).and. enddo !do il=1,ncum #ifdef ISOVERIF do il=1,ncum call iso_verif_noNaN(qent(il,i,j),'cv3_routines 2204') do ixt = 1, ntraciso call iso_verif_noNaN(xtent(ixt,il,i,j),'cv3_routines 2213') enddo !do ixt = 1, ntraciso enddo #endif #ifdef ISOVERIF do il=1,ncum write(*,*) 'cv3_routines 2083: call condiso_liq_ice_vectall' call iso_verif_positif(qent(il,i,j)-elij(il,i,j), & & 'cv3_routines 2085') if (iso_eau.gt.0) then if (iso_verif_egalite_nostop(qent(il,i,j), & & xtent(iso_eau,il,i,j), & & 'cv3_routine 2126').eq.1) then write(*,*) 'il,i,j=',il,i,j write(*,*) 'sij(il,i,j)=',sij(il,i,j) write(*,*) 'xt(:,il,i)=',xt(:,il,i) write(*,*) 'xtrti(:,il)=',xtrti(:,il) write(*,*) 'rr(il,i)=',rr(il,i) write(*,*) 'qnk(il)=',qnk(il) write(*,*) 'xtnk(:,il)=',xtnk(:,il) stop endif !if (iso_verif_egalite_nostop(qent(il,i,j), endif !if (iso_eau.gt.0) then enddo !do il=1,ncum #endif call condiso_liq_ice_vectall(xtent(1,1,i,j),qent(1,i,j), & & elij(1,i,j), & & t(1,j),zfice(1),zxtice(1,1),zxtliq(1,1),ncum) #ifdef ISOTRAC call condiso_liq_ice_vectall_trac(xtent(1,1,i,j),qent(1,i,j), & & elij(1,i,j), & & t(1,j),zfice(1),zxtice(1,1),zxtliq(1,1),ncum) #ifdef ISOVERIF do il=1,ncum call iso_verif_traceur(xt(1,il,i),'cv3_routines 1967') if( (i.ge.icb(il)).and.(i.le.inb(il)).and. & & (j.ge.(icb(il)-1)).and.(j.le.inb(il)))then call iso_verif_traceur(xtrti(1,il),'cv3_routines 1968') endif !if( (i.ge.icb(il)).and.(i.le.inb(il)).and. call iso_verif_traceur(xtent(1,il,i,j),'cv3_routines 1969') enddo !do il=1,ncum #endif #endif do il=1,ncum do ixt = 1, ntraciso xtelij(ixt,il,i,j)=zxtice(ixt,il)+zxtliq(ixt,il) enddo !do ixt = 1, ntraciso enddo !do il=1,ncum #ifdef ISOTRAC ! write(*,*) 'cv3_routines tmp 1987,option_traceurs=', ! : option_traceurs if (option_tmin.ge.1) then do il=1,ncum ! write(*,*) 'cv3 tmp 1991 il,i,j,xtent(:,il,i,j),', ! : 'tcond(il),rs(il,j)=', ! : il,i,j,xtent(:,il,i,j),tcond(il),rs(il,j) ! colorier la vapeur residuelle selon temperature de ! condensation, et le condensat en un tag specifique if ((elij(il,i,j).gt.0.0).and.(qent(il,i,j).gt.0.0)) then if (option_traceurs.eq.17) then call iso_recolorise_condensation(qent(il,i,j),elij(il,i,j), & & xtent(1,il,i,j),xtelij(1,il,i,j),t(1,j), & & 0.0,xtres, & & seuil_tag_tmin) else !if (option_traceurs.eq.17) then ! write(*,*) 'cv3 2002: il,i,j =',il,i,j call iso_recolorise_condensation(qent(il,i,j),elij(il,i,j), & & xtent(1,il,i,j),xtelij(1,il,i,j),rs(il,j),0.0,xtres, & & seuil_tag_tmin) endif !if (option_traceurs.eq.17) then do ixt=1+niso,ntraciso xtent(ixt,il,i,j)=xtres(ixt) enddo endif !if (cond.gt.0.0) then enddo !do il=1,ncum #ifdef ISOVERIF do il=1,ncum call iso_verif_traceur(xtent(1,il,i,j),'cv3_routines 1996') call iso_verif_traceur(xtelij(1,il,i,j),'cv3_routines 1997') call iso_verif_trac17_q_deltaD(xtent(1,il,i,j), & & 'cv3_routines 2042') enddo !do il=1,ncum #endif endif !if (option_tmin.ge.1) then #endif ! fractionation: #ifdef ISOVERIF ! write(*,*) 'cv3_routines 2050: avant condiso' do il=1,ncum if ((i.ge.icb(il)).and.(i.le.inb(il)).and. & & (j.ge.(icb(il)-1)).and.(j.le.inb(il))) then if (sij(il,i,j).gt.0.0.and.sij(il,i,j).lt.0.95) then if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtent(iso_eau,il,i,j), & & qent(il,i,j),'cv3_routines 1889',errmax,errmaxrel) call iso_verif_egalite_choix(xtelij(iso_eau,il,i,j), & & elij(il,i,j),'cv3_routines 1890',errmax,errmaxrel) endif if (iso_HDO.gt.0) then call iso_verif_aberrant_choix(xt(iso_HDO,il,i),rr(il,i), & & ridicule,deltalim,'cv3_routines 1997') call iso_verif_aberrant_choix( & & xtent(iso_HDO,il,i,j),qent(il,i,j), & & ridicule,deltalim,'cv3_routines 1931') call iso_verif_aberrant_choix( & & xtelij(iso_HDO,il,i,j),elij(il,i,j), & & ridicule,deltalim,'cv3_routines 1993') endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC ! write(*,*) 'cv3_routines tmp 2039 il=',il call iso_verif_traceur(xtent(1,il,i,j), & & 'cv3_routines 2031') call iso_verif_traceur(xtelij(1,il,i,j), & & 'cv3_routines 2033') #endif endif !if(sij(il,i,j).gt.0.0.and.sij(il,i,j).lt.0.95)then endif !if( (i.ge.icb(il)).and.(i.le.inb(il)).and. enddo !do il=1,ncum #endif ! write(*,*) 'cv3_routine tmp 1984: cond=',elij(il,i,j) #endif END DO !AC! do k=1,ntra !AC! do j=minorig,nl !AC! do il=1,ncum !AC! if( (i.ge.icb(il)).and.(i.le.inb(il)).and. !AC! : (j.ge.(icb(il)-1)).and.(j.le.inb(il)))then !AC! traent(il,i,j,k)=sij(il,i,j)*tra(il,i,k) !AC! : +(1.-sij(il,i,j))*tra(il,nk(il),k) !AC! endif !AC! enddo !AC! enddo !AC! enddo ! *** if no air can entrain at level i assume that updraft detrains *** ! *** at that level and calculate detrained air flux and properties *** ! @ do 170 i=icb(il),inb(il) DO il = 1, ncum IF ((i>=icb(il)) .AND. (i<=inb(il)) .AND. (nent(il,i)==0)) THEN ! @ if(nent(il,i).eq.0)then ment(il, i, i) = m(il, i) qent(il, i, i) = qnk(il) - ep(il, i)*clw(il, i) uent(il, i, i) = unk(il) vent(il, i, i) = vnk(il) elij(il, i, i) = clw(il, i) ! MAF sij(il,i,i)=1.0 sij(il, i, i) = 0.0 #ifdef ISO do ixt = 1, ntraciso xtent(ixt,il,i,i)=xtnk(ixt,il)-ep(il,i)*xtclw(ixt,il,i) ! xtent(ixt,il,i,i)=xt(ixt,il,nk(il))-xtep(ixt,il,i)*xtclw(ixt,il,i) ! le 7 mai: on supprime xtep xtelij(ixt,il,i,i)=xtclw(ixt,il,i) ! rq: ne sera pas utilise ensuite enddo ! do ixt = 1, ntraciso #ifdef ISOTRAC if (option_tmin.ge.1) then ! colorier la vapeur residuelle selon temperature de ! condensation, et le condensat en un tag specifique ! write(*,*) 'cv3 tmp 2095 il,i,j,xtent(:,il,i,j)=', ! : il,i,j,xtent(:,il,i,j) if ((elij(il,i,i).gt.0.0).and.(qent(il,i,i).gt.0.0)) then if (option_traceurs.eq.17) then call iso_recolorise_condensation(qent(il,i,i), & & elij(il,i,i), & & xt(1,il,nk(il)),xtclw(1,il,i),t(il,i),ep(il,i), & & xtres, & & seuil_tag_tmin) else !if (option_traceurs.eq.17) then call iso_recolorise_condensation(qent(il,i,i), & & elij(il,i,i), & & xt(1,il,nk(il)),xtclw(1,il,i),rs(il,i),ep(il,i), & & xtres, & & seuil_tag_tmin) endif !if (option_traceurs.eq.17) then do ixt=1+niso,ntraciso xtent(ixt,il,i,i)=xtres(ixt) enddo #ifdef ISOVERIF do ixt=1,niso call iso_verif_egalite_choix(xtres(ixt),xtent(ixt,il,i,i), & & 'cv3_routines 2102',errmax,errmaxrel) call iso_verif_trac17_q_deltaD(xtent(1,il,i,j), & & 'cv3_routines 2154') enddo #endif endif !if (cond.gt.0.0) then #ifdef ISOVERIF call iso_verif_egalite_choix(xtent(iso_eau,il,i,i),& & qent(il,i,i),'cv3_routines 2103',errmax,errmaxrel) call iso_verif_traceur(xtent(1,il,i,i),'cv3_routines 2095') call iso_verif_traceur(xtelij(1,il,i,i),'cv3_routines 2096') #endif endif !if (option_tmin.ge.1) then #endif #endif END IF END DO END DO !AC! do j=1,ntra !AC! do i=minorig+1,nl !AC! do il=1,ncum !AC! if (i.ge.icb(il) .and. i.le.inb(il) .and. nent(il,i).eq.0) then !AC! traent(il,i,i,j)=tra(il,nk(il),j) !AC! endif !AC! enddo !AC! enddo !AC! enddo DO j = minorig, nl DO i = minorig, nl DO il = 1, ncum IF ((j>=(icb(il)-1)) .AND. (j<=inb(il)) .AND. (i>=icb(il)) .AND. (i<=inb(il))) THEN sigij(il, i, j) = sij(il, i, j) END IF END DO END DO END DO ! @ enddo ! @170 continue ! ===================================================================== ! --- NORMALIZE ENTRAINED AIR MASS FLUXES ! --- TO REPRESENT EQUAL PROBABILITIES OF MIXING ! ===================================================================== CALL zilch(asum, nloc*nd) CALL zilch(csum, nloc*nd) CALL zilch(csum, nloc*nd) DO il = 1, ncum lwork(il) = .FALSE. END DO DO i = minorig + 1, nl num1 = 0 DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il)) num1 = num1 + 1 END DO IF (num1<=0) GO TO 789 DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il)) THEN lwork(il) = (nent(il,i)/=0) qp = qnk(il) - ep(il, i)*clw(il, i) IF (cvflag_ice) THEN anum = h(il, i) - hp(il, i) - (lv(il,i)+frac(il,i)*lf(il,i))* & (qp-rs(il,i)) + (cpv-cpd)*t(il, i)*(qp-rr(il,i)) denom = h(il, i) - hp(il, i) + (lv(il,i)+frac(il,i)*lf(il,i))* & (rr(il,i)-qp) + (cpd-cpv)*t(il, i)*(rr(il,i)-qp) ELSE anum = h(il, i) - hp(il, i) - lv(il, i)*(qp-rs(il,i)) + & (cpv-cpd)*t(il, i)*(qp-rr(il,i)) denom = h(il, i) - hp(il, i) + lv(il, i)*(rr(il,i)-qp) + & (cpd-cpv)*t(il, i)*(rr(il,i)-qp) END IF IF (abs(denom)<0.01) denom = 0.01 scrit(il) = anum/denom alt = qp - rs(il, i) + scrit(il)*(rr(il,i)-qp) IF (scrit(il)<=0.0 .OR. alt<=0.0) scrit(il) = 1.0 smax(il) = 0.0 asij(il) = 0.0 END IF END DO DO j = nl, minorig, -1 num2 = 0 DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. & j>=(icb(il)-1) .AND. j<=inb(il) .AND. & lwork(il)) num2 = num2 + 1 END DO IF (num2<=0) GO TO 175 DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. & j>=(icb(il)-1) .AND. j<=inb(il) .AND. & lwork(il)) THEN IF (sij(il,i,j)>1.0E-16 .AND. sij(il,i,j)<0.95) THEN wgh = 1.0 IF (j>i) THEN sjmax = max(sij(il,i,j+1), smax(il)) sjmax = amin1(sjmax, scrit(il)) smax(il) = max(sij(il,i,j), smax(il)) sjmin = max(sij(il,i,j-1), smax(il)) sjmin = amin1(sjmin, scrit(il)) IF (sij(il,i,j)<(smax(il)-1.0E-16)) wgh = 0.0 smid = amin1(sij(il,i,j), scrit(il)) ELSE sjmax = max(sij(il,i,j+1), scrit(il)) smid = max(sij(il,i,j), scrit(il)) sjmin = 0.0 IF (j>1) sjmin = sij(il, i, j-1) sjmin = max(sjmin, scrit(il)) END IF delp = abs(sjmax-smid) delm = abs(sjmin-smid) asij(il) = asij(il) + wgh*(delp+delm) ment(il, i, j) = ment(il, i, j)*(delp+delm)*wgh END IF END IF END DO 175 END DO DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. lwork(il)) THEN asij(il) = max(1.0E-16, asij(il)) asij(il) = 1.0/asij(il) asum(il, i) = 0.0 bsum(il, i) = 0.0 csum(il, i) = 0.0 END IF END DO DO j = minorig, nl DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. lwork(il) .AND. & j>=(icb(il)-1) .AND. j<=inb(il)) THEN ment(il, i, j) = ment(il, i, j)*asij(il) END IF END DO END DO DO j = minorig, nl DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. lwork(il) .AND. & j>=(icb(il)-1) .AND. j<=inb(il)) THEN asum(il, i) = asum(il, i) + ment(il, i, j) ment(il, i, j) = ment(il, i, j)*sig(il, j) bsum(il, i) = bsum(il, i) + ment(il, i, j) END IF END DO END DO DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. lwork(il)) THEN bsum(il, i) = max(bsum(il,i), 1.0E-16) bsum(il, i) = 1.0/bsum(il, i) END IF END DO DO j = minorig, nl DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. lwork(il) .AND. & j>=(icb(il)-1) .AND. j<=inb(il)) THEN ment(il, i, j) = ment(il, i, j)*asum(il, i)*bsum(il, i) END IF END DO END DO DO j = minorig, nl DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. lwork(il) .AND. & j>=(icb(il)-1) .AND. j<=inb(il)) THEN csum(il, i) = csum(il, i) + ment(il, i, j) END IF END DO END DO DO il = 1, ncum IF (i>=icb(il) .AND. i<=inb(il) .AND. lwork(il) .AND. & csum(il,i)cv3_unsat, iflag(1) ', iflag(1) smallestreal=tiny(smallestreal) ! ============================= ! --- INITIALIZE OUTPUT ARRAYS ! ============================= ! (loops up to nl+1) mp(:,:) = 0. rp(:,:) = 0. up(:,:) = 0. vp(:,:) = 0. water(:,:) = 0. evap(:,:) = 0. wt(:,:) = 0. ice(:,:) = 0. fondue(:,:) = 0. faci(:,:) = 0. b(:,:) = 0. sigd(:) = 0. !! RomP >>> wdtrainA(:,:) = 0. wdtrainS(:,:) = 0. wdtrainM(:,:) = 0. !! RomP <<< DO i = 1, nlp DO il = 1, ncum rp(il, i) = rr(il, i) up(il, i) = u(il, i) vp(il, i) = v(il, i) wt(il, i) = 0.001 END DO END DO #ifdef ISO do i=1,nd do il=1,nloc do ixt=1,ntraciso xtp(ixt,il,i)=0.0 xtwater(ixt,il,i)=0.0 xtevap(ixt,il,i)=0.0 xtice(ixt,il,i)=0.0 enddo !do ixt=1,niso enddo !do il=1,nloc enddo !do i=1,nd #endif ! *** Set the fractionnal area sigd of precipitating downdraughts DO il = 1, ncum sigd(il) = sigdz*coef_clos(il) END DO ! ===================================================================== ! --- INITIALIZE VARIOUS ARRAYS AND PARAMETERS USED IN THE COMPUTATIONS ! ===================================================================== ! (loops up to nl+1) delti = 1./delt tinv = 1./3. DO i = 1, nlp DO il = 1, ncum frac(il, i) = 0.0 fraci(il, i) = 0.0 prec(il, i) = 0.0 lvcp(il, i) = lv(il, i)/cpn(il, i) lfcp(il, i) = lf(il, i)/cpn(il, i) #ifdef ISO rpprec(il,i)=rp(il,i) do ixt=1,ntraciso xtp(ixt,il,i)=xt(ixt,il,i) xtwater(ixt,il,i)=0.0 xtevap(ixt,il,i)=0.0 enddo !c-- debug #ifdef ISOVERIF do ixt=1,ntraciso call iso_verif_noNaN(xtwater(ixt,il,i),'cv3_routines 2888') enddo if(iso_eau.gt.0) then call iso_verif_egalite_choix(xt(iso_eau,il,i),rr(il,i), & & 'cv3_unsat 2245 ',errmax,errmaxrel) call iso_verif_egalite_choix(xtp(iso_eau,il,i),rp(il,i), & & 'cv3_unsat 2247 ',errmax,errmaxrel) do j=1,nl call iso_verif_egalite_choix(xtelij(iso_eau,il,i,j), & & elij(il,i,j),'cv3_unsat 2267 ',errmax,errmaxrel) enddo !do j=1,nl endif !if(iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xt(1,il,i),'cv3_routine 2410') call iso_verif_traceur(xtp(1,il,i),'cv3_routine 2411') #endif #endif rp(il,i)=max(rp(il,i),0.0) do ixt=1,ntraciso xtp(ixt,il,i)=max(xtp(ixt,il,i),0.0) enddo #endif END DO END DO !AC! do k=1,ntra !AC! do i=1,nd !AC! do il=1,ncum !AC! trap(il,i,k)=tra(il,i,k) !AC! enddo !AC! enddo !AC! enddo ! *** check whether ep(inb)=0, if so, skip precipitating *** ! *** downdraft calculation *** DO il = 1, ncum !! lwork(il)=.TRUE. !! if(ep(il,inb(il)).lt.0.0001)lwork(il)=.FALSE. !jyg< !! lwork(il) = ep(il, inb(il)) >= 0.0001 lwork(il) = ep(il, inb(il)) >= 0.0001 .AND. iflag(il) <= 2 END DO ! ! Get adiabatic ascent mass flux ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (adiab_ascent_mass_flux_depends_on_ejectliq) THEN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Warning : this option leads to water conservation violation !!! Expert only !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DO il = 1, ncum ma(il, nlp) = 0. ma(il, 1) = 0. END DO DO i = nl, 2, -1 DO il = 1, ncum ma(il, i) = ma(il, i+1)*(1.-qta(il,i))/(1.-qta(il,i-1)) + m(il, i) END DO END DO !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ELSE ! (adiab_ascent_mass_flux_depends_on_ejectliq) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DO il = 1, ncum ma(il, nlp) = 0. ma(il, 1) = 0. END DO DO i = nl, 2, -1 DO il = 1, ncum ma(il, i) = ma(il, i+1) + m(il, i) END DO END DO ENDIF ! (adiab_ascent_mass_flux_depends_on_ejectliq) ELSE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! ! *** begin downdraft loop *** ! ! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ DO i = nl + 1, 1, -1 num1 = 0 DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il)) num1 = num1 + 1 END DO IF (num1<=0) GO TO 400 CALL zilch(wdtrain, ncum) #ifdef ISO call zilch(xtwdtrain,ncum*ntraciso) #endif ! *** integrate liquid water equation to find condensed water *** ! *** and condensed water flux *** ! ! ! *** calculate detrained precipitation *** DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il)) THEN wdtrain(il) = grav*ep(il, i)*m(il, i)*clw(il, i) wdtrainS(il, i) = wdtrain(il)/grav ! Ps jyg !! wdtrainA(il, i) = wdtrain(il)/grav ! Ps RomP #ifdef ISO do ixt=1,ntraciso ! xtwdtrain(ixt,il)=grav*xtep(ixt,il,i)*m(il,i)*xtclw(ixt,il,i) xtwdtrain(ixt,il)=grav*ep(il,i)*m(il,i)*xtclw(ixt,il,i) enddo #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtwdtrain(iso_eau,il), & & wdtrain(il),'cv3_routines 2313',errmax,errmaxrel) endif !if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xtwdtrain(1,il),'cv3_routine 2480') #endif #endif #endif END IF END DO IF (i>1) THEN DO j = 1, i - 1 DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il)) THEN awat = elij(il, j, i) - (1.-ep(il,i))*clw(il, i) awat = max(awat, 0.0) wdtrain(il) = wdtrain(il) + grav*awat*ment(il, j, i) wdtrainM(il, i) = wdtrain(il)/grav - wdtrainS(il, i) ! Pm jyg !! wdtrainM(il, i) = wdtrain(il)/grav - wdtrainA(il, i) ! Pm RomP #ifdef ISO ! precip mixed drafts computed from: xtawat/xtelij = awat/elij if (elij(il,j,i).gt.0.0) then do ixt=1,ntraciso xtawat(ixt)=xtelij(ixt,il,j,i)*(awat/elij(il,j,i)) xtawat(ixt)=max(xtawat(ixt),0.0) enddo !! xtawat(ixt)=amin1(xtawat(ixt),xtelij(ixt,il,j,i)) !security.. else !if (elij(il,j,i).gt.0.0) then do ixt=1,ntraciso xtawat(ixt)=0.0 enddo !do ixt=1,niso endif !if (elij(il,j,i).gt.0.0) then #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtawat(iso_eau), & & awat,'cv3_routines 2391',errmax,errmaxrel) endif !if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xtawat(1),'cv3_routine 2522') #endif #endif do ixt=1,ntraciso xtwdtrain(ixt,il)=xtwdtrain(ixt,il) & & +grav*xtawat(ixt)*ment(il,j,i) enddo #endif #ifdef ISO #ifdef ISOVERIF do ixt=1,ntraciso call iso_verif_noNaN(xtwdtrain(ixt,il), & & 'cv3_routine 3060') enddo !do ixt=1,ntraciso #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtwdtrain(iso_eau,il), & & wdtrain(il),'cv3_routines 2366',errmax,errmaxrel) endif !if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xtwdtrain(1,il),'cv3_routine 2540') if (option_cond.ge.1) then ! on verifie que tout le detrainement est tagge condensat if (iso_verif_positif_nostop( & & xtwdtrain(itZonIso(izone_cond,iso_eau),il) & & -xtwdtrain(iso_eau,il), & & 'cv3_routines 2795').eq.1) then write(*,*) 'xtwdtrain(:,il)=',xtwdtrain(:,il) write(*,*) 'xtelij(:,il,j,i)=',xtelij(:,il,j,i) write(*,*) 'xtclw(:,il,i)=',xtclw(:,il,i) stop endif !if (iso_verif_positif_nostop(Pxtisup(iso_eau,il)- endif !if (option_cond.ge.1) then #endif #endif #endif END IF END DO END DO END IF IF (cvflag_prec_eject) THEN #ifdef ISO CALL abort_gcm('cv3_routines 4037','isos pas prevus ici',1) #endif !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (adiab_ascent_mass_flux_depends_on_ejectliq) THEN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Warning : this option leads to water conservation violation !!! Expert only !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF ( i > 1) THEN DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il)) THEN wdtrainA(il,i) = ma(il, i+1)*(qta(il, i-1)-qta(il,i))/(1. - qta(il, i-1)) ! Pa jygprl wdtrain(il) = wdtrain(il) + grav*wdtrainA(il,i) END IF END DO ENDIF ! ( i > 1) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ELSE ! (adiab_ascent_mass_flux_depends_on_ejectliq) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF ( i > 1) THEN DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il)) THEN wdtrainA(il,i) = ma(il, i+1)*(qta(il, i-1)-qta(il,i)) ! Pa jygprl wdtrain(il) = wdtrain(il) + grav*wdtrainA(il,i) END IF END DO ENDIF ! ( i > 1) ENDIF ! (adiab_ascent_mass_flux_depends_on_ejectliq) ELSE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ENDIF ! (cvflag_prec_eject) ! *** find rain water and evaporation using provisional *** ! *** estimates of rp(i)and rp(i-1) *** IF (cvflag_ice) THEN !!jygprl IF (cvflag_prec_eject) THEN DO il = 1, ncum !!jygprl IF (i<=inb(il) .AND. lwork(il)) THEN !!jygprl frac(il, i) = (frac_a(il,i)*wdtrainA(il,i)+frac_s(il,i)*(wdtrainS(il,i)+wdtrainM(il,i))) / & !!jygprl max(wdtrainA(il,i)+wdtrainS(il,i)+wdtrainM(il,i),smallestreal) !!jygprl fraci(il, i) = frac(il, i) !!jygprl END IF !!jygprl END DO !!jygprl ELSE ! (cvflag_prec_eject) DO il = 1, ncum !!jygprl IF (i<=inb(il) .AND. lwork(il)) THEN !!jygprl !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (keepbug_ice_frac) THEN frac(il, i) = frac_s(il, i) ! Ice fraction computed again here as a function of the temperature seen by unsaturated downdraughts ! (i.e. the cold pool temperature) for compatibility with earlier versions. fraci(il, i) = 1. - (t(il,i)-243.15)/(263.15-243.15) fraci(il, i) = min(max(fraci(il,i),0.0), 1.0) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ELSE ! (keepbug_ice_frac) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! frac(il, i) = frac_s(il, i) fraci(il, i) = frac(il, i) !!jygprl ENDIF ! (keepbug_ice_frac) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! END IF !!jygprl END DO !!jygprl ENDIF ! (cvflag_prec_eject) END IF !!jygprl DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il)) THEN wt(il, i) = 45.0 IF (i= 20) THEN Print*, 'cv3_unsat after provisional rp estimate: rp, afac, bfac ', & i, rp(1, i), afac,bfac ENDIF ! !JYG1 ! cc sigt=1.0 ! cc if(i.ge.icb)sigt=sigp(i) ! prise en compte de la variation progressive de sigt dans ! les couches icb et icb-1: ! pour plclph(i), pr1=1 & pr2=0 ! pour ph(i+1)b6*b6+1.E-20) THEN revap = 2.*c6/(b6+sqrt(b6*b6+4.*c6)) ELSE revap = (-b6+sqrt(b6*b6+4.*c6))/2. END IF prec(il, i) = max(0., 2.*revap*revap-prec(il,i+1)) ! print*,prec(il,i),'neige' !JYG Dans sa formulation originale, Emanuel calcule l'evaporation par: ! c evap(il,i)=sigt*afac*revap ! ce qui n'est pas correct. Dans cv_routines, la formulation a ete modifiee. ! Ici,l'evaporation evap est simplement calculee par l'equation de ! conservation. ! prec(il,i)=revap*revap ! else !JYG---- Correction : si c6 <= 0, water(il,i)=0. ! prec(il,i)=0. ! endif !JYG--- Dans tous les cas, evaporation = [tt ce qui entre dans la couche i] ! moins [tt ce qui sort de la couche i] ! print *, 'evap avec ice' evap(il, i) = (wdtrain(il)+sigd(il)*wt(il,i)*(prec(il,i+1)-prec(il,i))) / & (sigd(il)*(ph(il,i)-ph(il,i+1))*100.) ! IF (prt_level >= 20) THEN Print*, 'cv3_unsat after evap computation: wdtrain, sigd, wt, prec(i+1),prec(i) ', & i, wdtrain(1), sigd(1), wt(1,i), prec(1,i+1),prec(1,i) ENDIF ! !jyg< d6 = prec(il,i)-prec(il,i+1) !! d6 = bfac*wdtrain(il) - 100.*sigd(il)*bfac*(ph(il,i)-ph(il,i+1))*evap(il, i) !! e6 = bfac*wdtrain(il) !! f6 = -100.*sigd(il)*bfac*(ph(il,i)-ph(il,i+1))*evap(il, i) !>jyg !CR:tmax_fonte_cv: T for which ice is totally melted (used to be 275.15) thaw = (t(il,i)-273.15)/(tmax_fonte_cv-273.15) thaw = min(max(thaw,0.0), 1.0) !jyg< water(il, i) = water(il, i+1) + (1-fraci(il,i))*d6 ice(il, i) = ice(il, i+1) + fraci(il, i)*d6 water(il, i) = min(prec(il,i), max(water(il,i), 0.)) ice(il, i) = min(prec(il,i), max(ice(il,i), 0.)) !! water(il, i) = water(il, i+1) + (1-fraci(il,i))*d6 !! water(il, i) = max(water(il,i), 0.) !! ice(il, i) = ice(il, i+1) + fraci(il, i)*d6 !! ice(il, i) = max(ice(il,i), 0.) !>jyg fondue(il, i) = ice(il, i)*thaw water(il, i) = water(il, i) + fondue(il, i) ice(il, i) = ice(il, i) - fondue(il, i) IF (water(il,i)+ice(il,i)<1.E-30) THEN faci(il, i) = 0. ELSE faci(il, i) = ice(il, i)/(water(il,i)+ice(il,i)) END IF ! water(il,i)=water(il,i+1)+(1.-fraci(il,i))*e6+(1.-faci(il,i))*f6 ! water(il,i)=max(water(il,i),0.) ! ice(il,i)=ice(il,i+1)+fraci(il,i)*e6+faci(il,i)*f6 ! ice(il,i)=max(ice(il,i),0.) ! fondue(il,i)=ice(il,i)*thaw ! water(il,i)=water(il,i)+fondue(il,i) ! ice(il,i)=ice(il,i)-fondue(il,i) ! if((water(il,i)+ice(il,i)).lt.1.e-30)then ! faci(il,i)=0. ! else ! faci(il,i)=ice(il,i)/(water(il,i)+ice(il,i)) ! endif ELSE b6 = bfac*50.*sigd(il)*(ph(il,i)-ph(il,i+1))*sigt*afac c6 = water(il, i+1) + bfac*wdtrain(il) - & 50.*sigd(il)*bfac*(ph(il,i)-ph(il,i+1))*evap(il, i+1) IF (c6>0.0) THEN revap = 0.5*(-b6+sqrt(b6*b6+4.*c6)) water(il, i) = revap*revap ELSE water(il, i) = 0. END IF ! print *, 'evap sans ice' evap(il, i) = (wdtrain(il)+sigd(il)*wt(il,i)*(water(il,i+1)-water(il,i)))/ & (sigd(il)*(ph(il,i)-ph(il,i+1))*100.) END IF END IF !(i.le.inb(il) .and. lwork(il)) END DO ! ---------------------------------------------------------------- ! cc ! *** calculate precipitating downdraft mass flux under *** ! *** hydrostatic approximation *** DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il) .AND. i/=1) THEN tevap(il) = max(0.0, evap(il,i)) delth = max(0.001, (th(il,i)-th(il,i-1))) IF (cvflag_ice) THEN IF (cvflag_grav) THEN mp(il, i) = 100.*ginv*(lvcp(il,i)*sigd(il)*tevap(il)* & (p(il,i-1)-p(il,i))/delth + & lfcp(il,i)*sigd(il)*faci(il,i)*tevap(il)* & (p(il,i-1)-p(il,i))/delth + & lfcp(il,i)*sigd(il)*wt(il,i)/100.*fondue(il,i)* & (p(il,i-1)-p(il,i))/delth/(ph(il,i)-ph(il,i+1))) ELSE mp(il, i) = 10.*(lvcp(il,i)*sigd(il)*tevap(il)* & (p(il,i-1)-p(il,i))/delth + & lfcp(il,i)*sigd(il)*faci(il,i)*tevap(il)* & (p(il,i-1)-p(il,i))/delth + & lfcp(il,i)*sigd(il)*wt(il,i)/100.*fondue(il,i)* & (p(il,i-1)-p(il,i))/delth/(ph(il,i)-ph(il,i+1))) END IF ELSE IF (cvflag_grav) THEN mp(il, i) = 100.*ginv*lvcp(il, i)*sigd(il)*tevap(il)* & (p(il,i-1)-p(il,i))/delth ELSE mp(il, i) = 10.*lvcp(il, i)*sigd(il)*tevap(il)* & (p(il,i-1)-p(il,i))/delth END IF END IF END IF !(i.le.inb(il) .and. lwork(il) .and. i.ne.1) IF (prt_level .GE. 20) THEN PRINT *,'cv3_unsat, mp hydrostatic ', i, mp(il,i) ENDIF END DO ! ---------------------------------------------------------------- ! *** if hydrostatic assumption fails, *** ! *** solve cubic difference equation for downdraft theta *** ! *** and mass flux from two simultaneous differential eqns *** DO il = 1, ncum IF (i<=inb(il) .AND. lwork(il) .AND. i/=1) THEN amfac = sigd(il)*sigd(il)*70.0*ph(il, i)*(p(il,i-1)-p(il,i))* & (th(il,i)-th(il,i-1))/(tv(il,i)*th(il,i)) amp2 = abs(mp(il,i+1)*mp(il,i+1)-mp(il,i)*mp(il,i)) IF (amp2>(0.1*amfac)) THEN xf = 100.0*sigd(il)*sigd(il)*sigd(il)*(ph(il,i)-ph(il,i+1)) tf = b(il, i) - 5.0*(th(il,i)-th(il,i-1))*t(il, i) / & (lvcp(il,i)*sigd(il)*th(il,i)) af = xf*tf + mp(il, i+1)*mp(il, i+1)*tinv IF (cvflag_ice) THEN bf = 2.*(tinv*mp(il,i+1))**3 + tinv*mp(il, i+1)*xf*tf + & 50.*(p(il,i-1)-p(il,i))*xf*(tevap(il)*(1.+(lf(il,i)/lv(il,i))*faci(il,i)) + & (lf(il,i)/lv(il,i))*wt(il,i)/100.*fondue(il,i)/(ph(il,i)-ph(il,i+1))) ELSE bf = 2.*(tinv*mp(il,i+1))**3 + tinv*mp(il, i+1)*xf*tf + & 50.*(p(il,i-1)-p(il,i))*xf*tevap(il) END IF fac2 = 1.0 IF (bf<0.0) fac2 = -1.0 bf = abs(bf) ur = 0.25*bf*bf - af*af*af*tinv*tinv*tinv IF (ur>=0.0) THEN sru = sqrt(ur) fac = 1.0 IF ((0.5*bf-sru)<0.0) fac = -1.0 mp(il, i) = mp(il, i+1)*tinv + (0.5*bf+sru)**tinv + & fac*(abs(0.5*bf-sru))**tinv ELSE d = atan(2.*sqrt(-ur)/(bf+1.0E-28)) IF (fac2<0.0) d = 3.14159 - d mp(il, i) = mp(il, i+1)*tinv + 2.*sqrt(af*tinv)*cos(d*tinv) END IF mp(il, i) = max(0.0, mp(il,i)) IF (prt_level .GE. 20) THEN PRINT *,'cv3_unsat, mp cubic ', i, mp(il,i) ENDIF IF (cvflag_ice) THEN IF (cvflag_grav) THEN !JYG : il y a vraisemblablement une erreur dans la ligne 2 suivante: ! il faut diviser par (mp(il,i)*sigd(il)*grav) et non par (mp(il,i)+sigd(il)*0.1). ! Et il faut bien revoir les facteurs 100. b(il, i-1) = b(il, i) + 100.0*(p(il,i-1)-p(il,i))* & (tevap(il)*(1.+(lf(il,i)/lv(il,i))*faci(il,i)) + & (lf(il,i)/lv(il,i))*wt(il,i)/100.*fondue(il,i) / & (ph(il,i)-ph(il,i+1))) / & (mp(il,i)+sigd(il)*0.1) - & 10.0*(th(il,i)-th(il,i-1))*t(il, i) / & (lvcp(il,i)*sigd(il)*th(il,i)) ELSE b(il, i-1) = b(il, i) + 100.0*(p(il,i-1)-p(il,i))*& (tevap(il)*(1.+(lf(il,i)/lv(il,i))*faci(il,i)) + & (lf(il,i)/lv(il,i))*wt(il,i)/100.*fondue(il,i) / & (ph(il,i)-ph(il,i+1))) / & (mp(il,i)+sigd(il)*0.1) - & 10.0*(th(il,i)-th(il,i-1))*t(il, i) / & (lvcp(il,i)*sigd(il)*th(il,i)) END IF ELSE IF (cvflag_grav) THEN b(il, i-1) = b(il, i) + 100.0*(p(il,i-1)-p(il,i))*tevap(il) / & (mp(il,i)+sigd(il)*0.1) - & 10.0*(th(il,i)-th(il,i-1))*t(il, i) / & (lvcp(il,i)*sigd(il)*th(il,i)) ELSE b(il, i-1) = b(il, i) + 100.0*(p(il,i-1)-p(il,i))*tevap(il) / & (mp(il,i)+sigd(il)*0.1) - & 10.0*(th(il,i)-th(il,i-1))*t(il, i) / & (lvcp(il,i)*sigd(il)*th(il,i)) END IF END IF b(il, i-1) = max(b(il,i-1), 0.0) END IF !(amp2.gt.(0.1*amfac)) !jyg< This part shifted 10 lines farther !!! *** limit magnitude of mp(i) to meet cfl condition *** !! !! ampmax = 2.0*(ph(il,i)-ph(il,i+1))*delti !! amp2 = 2.0*(ph(il,i-1)-ph(il,i))*delti !! ampmax = min(ampmax, amp2) !! mp(il, i) = min(mp(il,i), ampmax) !>jyg ! *** force mp to decrease linearly to zero *** ! *** between cloud base and the surface *** ! c if(p(il,i).gt.p(il,icb(il)))then ! c mp(il,i)=mp(il,icb(il))*(p(il,1)-p(il,i))/(p(il,1)-p(il,icb(il))) ! c endif IF (ph(il,i)>0.9*plcl(il)) THEN mp(il, i) = mp(il, i)*(ph(il,1)-ph(il,i))/(ph(il,1)-0.9*plcl(il)) END IF !jyg< Shifted part ! *** limit magnitude of mp(i) to meet cfl condition *** ampmax = 2.0*(ph(il,i)-ph(il,i+1))*delti amp2 = 2.0*(ph(il,i-1)-ph(il,i))*delti ampmax = min(ampmax, amp2) mp(il, i) = min(mp(il,i), ampmax) !>jyg END IF ! (i.le.inb(il) .and. lwork(il) .and. i.ne.1) END DO ! ---------------------------------------------------------------- ! IF (prt_level >= 20) THEN Print*, 'cv3_unsat after mp computation: mp, b(i), b(i-1) ', & i, mp(1, i), b(1,i), b(1,max(i-1,1)) ENDIF ! ! *** find mixing ratio of precipitating downdraft *** DO il = 1, ncum IF (i mp(il, i+1) END IF ! (i.lt.inb(il) .and. lwork(il)) END DO DO il = 1, ncum IF (i1.0E-16) THEN IF (cvflag_grav) THEN rp(il, i) = rp(il,i+1) + 100.*ginv*0.5*sigd(il)*(ph(il,i)-ph(il,i+1)) * & (evap(il,i+1)+evap(il,i))/mp(il,i+1) ELSE rp(il, i) = rp(il,i+1) + 5.*sigd(il)*(ph(il,i)-ph(il,i+1)) * & (evap(il,i+1)+evap(il,i))/mp(il, i+1) END IF up(il, i) = up(il, i+1) vp(il, i) = vp(il, i+1) END IF ! (mp(il,i+1).gt.1.0e-16) END IF ! (mplus(il)) else if (.not.mplus(il)) #ifdef ISO ! rpprec(il,i)=rp(il,i) rpprec(il,i)=max(rp(il,i),0.0) ! modif le 11 dec 2011 #endif rp(il, i) = amin1(rp(il,i), rs(il,i)) rp(il, i) = max(rp(il,i), 0.0) END IF ! (i.lt.inb(il) .and. lwork(il)) END DO ! ---------------------------------------------------------------- ! *** find tracer concentrations in precipitating downdraft *** !AC! do j=1,ntra !AC! do il = 1,ncum !AC! if (i.lt.inb(il) .and. lwork(il)) then !AC!c !AC! if(mplus(il))then !AC! trap(il,i,j)=trap(il,i+1,j)*mp(il,i+1) !AC! : +trap(il,i,j)*(mp(il,i)-mp(il,i+1)) !AC! trap(il,i,j)=trap(il,i,j)/mp(il,i) !AC! else ! if (mplus(il)) !AC! if(mp(il,i+1).gt.1.0e-16)then !AC! trap(il,i,j)=trap(il,i+1,j) !AC! endif !AC! endif ! (mplus(il)) else if (.not.mplus(il)) !AC!c !AC! endif ! (i.lt.inb(il) .and. lwork(il)) !AC! enddo !AC! end do #ifdef ISO #ifdef ISOVERIF ! verif des inputs a appel stewart do il=1,ncum if (i.le.inb(il) .and. lwork(il)) then if (iso_eau.gt.0) then call iso_verif_egalite_choix(xt(iso_eau,il,i), & & rr(il,i),'appel_stewart 262, cas 1.1',errmax,errmaxrel) endif !if (iso_eau.gt.0) then !#ifdef ISOTRAC ! if (option_tmin.ge.1) then ! call iso_verif_positif(xtwater( ! : itZonIso(izone_cond,iso_eau),il,i+1) ! : -xtwater(iso_eau,il,i+1), ! : 'cv3_routines 3083') ! endif !if (option_tmin.ge.1) then !#endif endif enddo #endif ! appel de appel_stewart_vectorise call appel_stewart_vectall_np(lwork,ncum, & & ph,t,evap,xtwdtrain, & & wdtrain, & & water,rr,xt,rs,rpprec,mp,wt, & ! inputs physiques & xtwater,xtp, & ! outputs indispensables & xtevap, & ! diagnostiques & sigd, & ! inputs tunables & i,inb, & ! altitude: car cas particulier en INB & na,nd,nloc,cvflag_grav,ginv,1e-16) #ifdef ISOVERIF ! write(*,*) 'cv3_routines 2864 tmp: sortie de appel_stewart' ! verif des outputs de appel stewart do il=1,ncum if (i.le.inb(il) .and. lwork(il)) then do ixt=1,ntraciso call iso_verif_noNAN(xtp(ixt,il,i),'cv3_unsat 3382') call iso_verif_noNAN(xtwater(ixt,il,i),'cv3_unsat 3381') call iso_verif_noNAN(xtevap(ixt,il,i),'cv3_unsat 2661') enddo endif enddo !do il=1,ncum #endif #ifdef ISOVERIF do il=1,ncum if (i.le.inb(il) .and. lwork(il)) then if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtp(iso_eau,il,i), & & rpprec(il,i),'cv3_unsat 2736',errmax,errmaxrel) ! write(*,*) 'xtp(iso_eau,il,i),rpprec(il,i)=', ! : xtp(iso_eau,il,i),rpprec(il,i) call iso_verif_egalite_choix(xtwater(iso_eau,il,i), & & water(il,i),'cv3_unsat 2747',errmax,errmaxrel) ! write(*,*) 'xtwater(4,il,i)=',xtwater(4,il,i) ! write(*,*) 'water(il,i)=',water(il,i) call iso_verif_egalite_choix(xtevap(iso_eau,il,i), & & evap(il,i),'cv3_unsat 2751',errmax,errmaxrel) endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rp(il,i).gt.ridicule)) then call iso_verif_aberrant(xtp(iso_HDO,il,i)/rpprec(il,i), & & 'cv3unsat 2756') endif !if ((iso_HDO.gt.0).and. #ifdef ISOTRAC ! if (il.eq.602) then ! write(*,*) 'cv3_routine tmp: il,i=',il,i ! write(*,*) 'xtp(iso_eau:ntraciso:3,il,i)=', ! : xtp(iso_eau:ntraciso:3,il,i) ! endif call iso_verif_traceur(xtp(1,il,i),'cv3_routine 2852') call iso_verif_traceur(xtwater(1,il,1), & & 'cv3_routine 2853 unsat apres appel') call iso_verif_traceur_pbidouille(xtwater(1,il,i), & & 'cv3_routine 2853b') call iso_verif_traceur_justmass(xtevap(1,il,i), & & 'cv3_routine 2854') ! if (option_tmin.ge.1) then ! call iso_verif_positif(xtwater( ! : itZonIso(izone_cond,iso_eau),il,i) ! : -xtwater(iso_eau,il,i), ! : 'cv3_routines 3143') ! endif !if (option_tmin.ge.1) then #endif endif !if (i.le.inb(il) .and. lwork(il)) then enddo !do il=1,ncum #endif ! equivalent isotopique de rp(il,i)=amin1(rp(il,i),rs(il,i)) do il=1,ncum if (i.lt.inb(il) .and. lwork(il)) then if (rpprec(il,i).gt.rs(il,i)) then if (rs(il,i).le.0) then write(*,*) 'cv3unsat 2640' stop endif do ixt=1,ntraciso xtp(ixt,il,i)=xtp(ixt,il,i)/rpprec(il,i)*rs(il,i) xtp(ixt,il,i)=max(0.0,xtp(ixt,il,i)) enddo !do ixt=1,niso #ifdef ISOVERIF do ixt=1,ntraciso call iso_verif_noNaN(xtp(ixt,il,i),'cv3unsat 2641') enddo !do ixt=1,niso #endif #ifdef ISOVERIF if (iso_eau.gt.0) then ! write(*,*) 'xtp(iso_eau,il,i)=',xtp(iso_eau,il,i) call iso_verif_egalite_choix(xtp(iso_eau,il,i),rp(il,i), & & 'cv3unsat 2653',errmax,errmaxrel) call iso_verif_egalite_choix(xtp(iso_eau,il,i), & & rs(il,i),'cv3unsat 2654',errmax,errmaxrel) endif if ((iso_HDO.gt.0).and. & & (rp(il,i).gt.ridicule)) then if (iso_verif_aberrant_nostop(xtp(iso_HDO,il,i)/rp(il,i), & & 'cv3unsat 2658').eq.1) then write(*,*) 'rpprec(il,i),rs(il,i),rp(il,i)=', & & rpprec(il,i),rs(il,i),rp(il,i) stop endif endif #ifdef ISOTRAC call iso_verif_traceur(xtp(1,il,i),'cv3_routine 2893') #endif #endif rpprec(il,i)=rs(il,i) ! sous cas rajoute le 11dec 2011. Normalement, pas utile else if (rp(il,i).eq.0.0) then do ixt=1,ntraciso xtp(ixt,il,i)=0.0 enddo endif !if (rp(il,i).gt.rs(il,i)) then endif !if (i.lt.INB et lwork) enddo ! il=1,ncum #endif 400 END DO #ifdef ISO ! write(*,*) 'nl=',nl,'nd=',nd,'; ncum=',ncum #ifdef ISOVERIF do i=1,nl!nl do il=1,ncum if (iso_eau.gt.0) then ! write(*,*) 'cv3_routines 2767:i,il,lwork(il),inb(il)=', ! : i,il,lwork(il),inb(il) ! write(*,*) 'rp(il,i),xtp(iso_eau,il,i)=', ! : rp(il,i),xtp(iso_eau,il,i) call iso_verif_egalite_choix(xt(iso_eau,il,i), & & rr(il,i),'cv3_unsat 2668',errmax,errmaxrel) call iso_verif_egalite_choix(xtp(iso_eau,il,i), & & rp(il,i),'cv3_unsat 2670',errmax,errmaxrel) call iso_verif_egalite_choix(xtwater(iso_eau,il,i), & & water(il,i),'cv3_unsat 2672',errmax,errmaxrel) endif !if (iso_eau.gt.0) then !#ifdef ISOTRAC ! if (iso_verif_traceur_choix_nostop(xtwater(1,il,i), ! : 'cv3_routine 2982 unsat',errmax, ! : errmaxrel,ridicule_trac,deltalimtrac).eq.1) then ! write(*,*) 'il,i,inb(il),lwork(il)=', ! : il,i,inb(il),lwork(il) ! write(*,*) 'xtwater(:,il,i)=',xtwater(:,il,i) ! stop ! endif !#endif enddo !do il=1,nloc!ncum enddo !do i=1,nl!nl ! il=130 ! write(*,*) 'cv3_unsat 2780: '// ! : 'il,water(il,1),xtwater(iso_eau,il,1)=' ! : ,il,water(il,1),xtwater(iso_eau,il,1) #endif #endif ! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ! *** end of downdraft loop *** ! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ RETURN END SUBROUTINE cv3_unsat SUBROUTINE cv3_yield(nloc, ncum, nd, na, ntra, ok_conserv_q, & icb, inb, delt, & t, rr, t_wake, rr_wake, s_wake, u, v, tra, & gz, p, ph, h, hp, lv, lf, cpn, th, th_wake, & ep, clw, qpreca, m, tp, mp, rp, up, vp, trap, & wt, water, ice, evap, fondue, faci, b, sigd, & ment, qent, hent, iflag_mix, uent, vent, & nent, elij, traent, sig, & tv, tvp, wghti, & iflag, precip, Vprecip, Vprecipi, & ! jyg: Vprecipi ft, fr, fu, fv, ftra, & ! jyg cbmf, upwd, dnwd, dnwd0, ma, mip, & !! tls, tps, ! useless . jyg qcondc, wd, & ftd, fqd, qta, qtc, sigt, tau_cld_cv, coefw_cld_cv & #ifdef ISO & ,xt,xt_wake,xtclw,xtp,xtwater,xtice,xtevap & & ,xtent,xtelij,xtprecip,fxt,fxtd,xtVprecip,xtVprecipi & #ifdef DIAGISO & ,fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip & & ,fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip & & , f_detrainement,q_detrainement,xt_detrainement & #endif #endif & ) USE print_control_mod, ONLY: lunout, prt_level USE add_phys_tend_mod, only : fl_cor_ebil #ifdef ISO use infotrac_phy, ONLY: ntraciso=>ntiso, niso, nzone, itZonIso use isotopes_mod, ONLY: essai_convergence,ridicule,iso_eau,iso_HDO,iso_O18 #ifdef ISOVERIF use isotopes_verif_mod, ONLY: errmax,errmaxrel, & iso_verif_egalite_choix, iso_verif_noNaN,iso_verif_aberrant,iso_verif_O18_aberrant, & iso_verif_egalite,iso_verif_egalite_choix_nostop,iso_verif_positif_nostop, & iso_verif_egalite_nostop,iso_verif_aberrant_nostop,deltaD,iso_verif_noNaN_nostop, & iso_verif_positif,iso_verif_O18_aberrant_nostop,deltaO #endif #ifdef ISOTRAC use isotrac_mod, only: option_traceurs, & izone_revap,izone_poubelle,izone_ddft #ifdef ISOVERIF use isotopes_verif_mod, ONLY: iso_verif_traceur_choix_nostop,deltalimtrac, & & iso_verif_tracpos_choix_nostop,iso_verif_traceur,iso_verif_traceur_justmass use isotrac_mod, only: ridicule_trac #endif #endif #endif IMPLICIT NONE include "cvthermo.h" include "cv3param.h" include "cvflag.h" include "conema3.h" !inputs: INTEGER, INTENT (IN) :: iflag_mix INTEGER, INTENT (IN) :: ncum, nd, na, ntra, nloc LOGICAL, INTENT (IN) :: ok_conserv_q INTEGER, DIMENSION (nloc), INTENT (IN) :: icb, inb REAL, INTENT (IN) :: delt REAL, DIMENSION (nloc, nd), INTENT (IN) :: t, rr, u, v REAL, DIMENSION (nloc, nd), INTENT (IN) :: t_wake, rr_wake REAL, DIMENSION (nloc), INTENT (IN) :: s_wake REAL, DIMENSION (nloc, nd, ntra), INTENT (IN) :: tra REAL, DIMENSION (nloc, nd), INTENT (IN) :: p REAL, DIMENSION (nloc, nd+1), INTENT (IN) :: ph REAL, DIMENSION (nloc, na), INTENT (IN) :: gz, h, hp REAL, DIMENSION (nloc, na), INTENT (IN) :: th, tp REAL, DIMENSION (nloc, na), INTENT (IN) :: lv, cpn, ep, clw REAL, DIMENSION (nloc, na), INTENT (IN) :: lf REAL, DIMENSION (nloc, na), INTENT (IN) :: rp, up REAL, DIMENSION (nloc, na), INTENT (IN) :: vp REAL, DIMENSION (nloc, nd), INTENT (IN) :: wt REAL, DIMENSION (nloc, nd, ntra), INTENT (IN) :: trap REAL, DIMENSION (nloc, na), INTENT (IN) :: water, evap, b REAL, DIMENSION (nloc, na), INTENT (IN) :: fondue, faci, ice REAL, DIMENSION (nloc, na, na), INTENT (IN) :: qent, uent REAL, DIMENSION (nloc, na, na), INTENT (IN) :: hent REAL, DIMENSION (nloc, na, na), INTENT (IN) :: vent, elij INTEGER, DIMENSION (nloc, nd), INTENT (IN) :: nent REAL, DIMENSION (nloc, na, na, ntra), INTENT (IN) :: traent REAL, DIMENSION (nloc, nd), INTENT (IN) :: tv, tvp, wghti REAL, DIMENSION (nloc, nd), INTENT (IN) :: qta REAL, DIMENSION (nloc, na),INTENT(IN) :: qpreca REAL, INTENT(IN) :: tau_cld_cv, coefw_cld_cv #ifdef ISO real, DIMENSION (ntraciso,nloc,nd), INTENT (IN) :: xt real, DIMENSION (ntraciso,nloc,nd), INTENT (IN) :: xt_wake real, DIMENSION (ntraciso,nloc,na), INTENT (IN) :: xtclw, xtp real, DIMENSION (ntraciso,nloc,na), INTENT (IN) :: xtwater, xtevap real, DIMENSION (ntraciso,nloc,na,na), INTENT (IN) :: xtent, xtelij REAL, DIMENSION (ntraciso,nloc, na), INTENT (IN) :: xtice #endif ! !input/output: REAL, DIMENSION (nloc, na), INTENT (INOUT) :: m, mp REAL, DIMENSION (nloc, na, na), INTENT (INOUT) :: ment INTEGER, DIMENSION (nloc), INTENT (INOUT) :: iflag REAL, DIMENSION (nloc, nd), INTENT (INOUT) :: sig REAL, DIMENSION (nloc), INTENT (INOUT) :: sigd ! !outputs: REAL, DIMENSION (nloc), INTENT (OUT) :: precip REAL, DIMENSION (nloc, nd), INTENT (OUT) :: ft, fr, fu, fv REAL, DIMENSION (nloc, nd), INTENT (OUT) :: ftd, fqd REAL, DIMENSION (nloc, nd, ntra), INTENT (OUT) :: ftra REAL, DIMENSION (nloc, nd), INTENT (OUT) :: upwd, dnwd, ma REAL, DIMENSION (nloc, nd), INTENT (OUT) :: dnwd0, mip REAL, DIMENSION (nloc, nd+1), INTENT (OUT) :: Vprecip REAL, DIMENSION (nloc, nd+1), INTENT (OUT) :: Vprecipi !! REAL tls(nloc, nd), tps(nloc, nd) ! useless . jyg REAL, DIMENSION (nloc, nd), INTENT (OUT) :: qcondc ! cld REAL, DIMENSION (nloc, nd), INTENT (OUT) :: qtc, sigt ! cld REAL, DIMENSION (nloc), INTENT (OUT) :: wd ! gust REAL, DIMENSION (nloc), INTENT (OUT) :: cbmf #ifdef ISO REAL, DIMENSION (ntraciso,nloc), INTENT (OUT) :: xtprecip REAL, DIMENSION (ntraciso,nloc, nd), INTENT (OUT) :: fxt,fxtd real, DIMENSION (ntraciso,nloc, nd+1), INTENT (OUT) :: xtVprecip, xtVprecipi #endif ! !local variables: INTEGER :: i, k, il, n, j, num1 REAL :: rat, delti REAL :: ax, bx, cx, dx, ex REAL :: cpinv, rdcp, dpinv REAL :: sigaq REAL, DIMENSION (nloc) :: awat REAL, DIMENSION (nloc, nd) :: lvcp, lfcp ! , mke ! unused . jyg REAL, DIMENSION (nloc) :: am, work, ad, amp1 !! real up1(nloc), dn1(nloc) REAL, DIMENSION (nloc, nd, nd) :: up1, dn1 !jyg< REAL, DIMENSION (nloc, nd) :: up_to, up_from REAL, DIMENSION (nloc, nd) :: dn_to, dn_from !>jyg REAL, DIMENSION (nloc) :: asum, bsum, csum, dsum REAL, DIMENSION (nloc) :: esum, fsum, gsum, hsum REAL, DIMENSION (nloc, nd) :: th_wake REAL, DIMENSION (nloc) :: alpha_qpos, alpha_qpos1 REAL, DIMENSION (nloc, nd) :: qcond, nqcond, wa ! cld REAL, DIMENSION (nloc, nd) :: siga, sax, mac ! cld REAL, DIMENSION (nloc) :: sument REAL, DIMENSION (nloc, nd) :: sigment, qtment ! cld REAL sumdq !jyg #ifdef ISO integer ixt real xtbx(ntraciso), xtawat(ntraciso,nloc) ! cam debug ! pour l'homogeneisation sous le nuage: real bxtsum(ntraciso,nloc), fxtsum(ntraciso,nloc) #ifdef DIAGISO ! diagnostiques juste: tendance des differents processus real fxt_detrainement(niso,nloc,nd) real fxt_fluxmasse(niso,nloc,nd) real fxt_evapprecip(niso,nloc,nd) real fxt_ddft(niso,nloc,nd) real fq_detrainement(nloc,nd) real q_detrainement(nloc,nd) real xt_detrainement(niso,nloc,nd) real f_detrainement(nloc,nd) real fq_fluxmasse(nloc,nd) real fq_evapprecip(nloc,nd) real fq_ddft(nloc,nd) #endif !#ifdef ISOVERIF ! integer iso_verif_noNaN_nostop !#endif !#ifdef ISOVERIF ! integer iso_verif_aberrant_nostop ! integer iso_verif_egalite_nostop ! integer iso_verif_egalite_choix_nostop ! real deltaD !#endif #ifdef ISOTRAC !integer iso_verif_traceur_choix_nostop !integer iso_verif_tracpos_choix_nostop real xtnew(ntraciso) ! real conversion(niso) real fxtYe(niso) real fxtqe(niso) real fxtXe(niso) real fxt_revap(niso) real Xe(niso) integer ixt_revap,izone integer ixt_poubelle, ixt_ddft,iiso #endif #endif ! ! ------------------------------------------------------------- ! initialization: delti = 1.0/delt ! print*,'cv3_yield initialisation delt', delt DO il = 1, ncum precip(il) = 0.0 wd(il) = 0.0 ! gust #ifdef ISO ! cam debug ! write(*,*) 'cv3_routines 3082: entree dans cv3_yield' ! en cam debug do ixt = 1, ntraciso xtprecip(ixt,il)=0.0 xtVprecip(ixt,il,nd+1)=0.0 enddo #endif END DO ! Fluxes are on a staggered grid : loops extend up to nl+1 DO i = 1, nlp DO il = 1, ncum Vprecip(il, i) = 0.0 Vprecipi(il, i) = 0.0 ! jyg upwd(il, i) = 0.0 dnwd(il, i) = 0.0 dnwd0(il, i) = 0.0 mip(il, i) = 0.0 END DO END DO DO i = 1, nl DO il = 1, ncum ft(il, i) = 0.0 fr(il, i) = 0.0 fu(il, i) = 0.0 fv(il, i) = 0.0 ftd(il, i) = 0.0 fqd(il, i) = 0.0 qcondc(il, i) = 0.0 ! cld qcond(il, i) = 0.0 ! cld qtc(il, i) = 0.0 ! cld qtment(il, i) = 0.0 ! cld sigment(il, i) = 0.0 ! cld sigt(il, i) = 0.0 ! cld nqcond(il, i) = 0.0 ! cld #ifdef ISO do ixt = 1, ntraciso fxt(ixt,il,i)=0.0 fxtd(ixt,il,i)=0.0 xtVprecip(ixt,il,i)=0.0 xtVprecipi(ixt,il,i)=0.0 enddo #ifdef DIAGISO fq_fluxmasse(il,i)=0.0 fq_detrainement(il,i)=0.0 f_detrainement(il,i)=0.0 q_detrainement(il,i)=0.0 fq_evapprecip(il,i)=0.0 fq_ddft(il,i)=0.0 do ixt = 1, niso fxt_fluxmasse(ixt,il,i)=0.0 fxt_detrainement(ixt,il,i)=0.0 xt_detrainement(ixt,il,i)=0.0 fxt_evapprecip(ixt,il,i)=0.0 fxt_ddft(ixt,il,i)=0.0 enddo #endif #endif END DO END DO ! print*,'cv3_yield initialisation 2' !AC! do j=1,ntra !AC! do i=1,nd !AC! do il=1,ncum !AC! ftra(il,i,j)=0.0 !AC! enddo !AC! enddo !AC! enddo ! print*,'cv3_yield initialisation 3' DO i = 1, nl DO il = 1, ncum lvcp(il, i) = lv(il, i)/cpn(il, i) lfcp(il, i) = lf(il, i)/cpn(il, i) END DO END DO #ifdef ISO ! on initialise mieux fr et fxt par securite fr(:,:)=0.0 fxt(:,:,:)=0.0 #endif ! *** calculate surface precipitation in mm/day *** DO il = 1, ncum IF (ep(il,inb(il))>=0.0001 .AND. iflag(il)<=1) THEN IF (cvflag_ice) THEN precip(il) = wt(il, 1)*sigd(il)*(water(il,1)+ice(il,1)) & *86400.*1000./(rowl*grav) #ifdef ISO do ixt = 1, ntraciso xtprecip(ixt,il)=wt(il,1)*sigd(il)*xtwater(ixt,il,1) & & *86400.*1000./(rowl*grav) ! en mm/jour enddo ! cam verif #ifdef ISOVERIF if (iso_eau.gt.0) then ! write(*,*) 'cv3_yield 2952: '// ! : 'il,water(il,1),xtwater(iso_eau,il,1)=' ! : ,il,water(il,1),xtwater(iso_eau,il,1) call iso_verif_egalite_choix(xtwater(iso_eau,il,1), & & water(il,1),'cv3_routines 2959', & & errmax,errmaxrel) !Rq: wt(il,1)*sigd*86400.*1000./(rowl*grav)=3964.6565 ! -> on auatorise 3e3 fois plus d'erreur dans precip call iso_verif_egalite_choix(xtprecip(iso_eau,il), & & precip(il),'cv3_routines 3138', & & errmax*4e3,errmaxrel) endif !if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xtwater(1,il,1), & & 'cv3_routine 3146') if (iso_verif_traceur_choix_nostop(xtprecip(1,il), & & 'cv3_routine 3147',errmax*1e2, & & errmaxrel,ridicule_trac,deltalimtrac).eq.1) then write(*,*) 'il,inb(il)=',il,inb(il) write(*,*) 'xtwater(:,il,1)=',xtwater(:,il,1) write(*,*) 'xtprecip(:,il)=',xtprecip(:,il) write(*,*) 'fac=',wt(il,1)*sigd*86400.*1000./(rowl*grav) stop endif #endif #endif ! end cam verif #endif ELSE precip(il) = wt(il, 1)*sigd(il)*water(il, 1) & *86400.*1000./(rowl*grav) #ifdef ISO do ixt = 1, ntraciso xtprecip(ixt,il)=wt(il,1)*sigd(il)*xtwater(ixt,il,1) & *86400.*1000./(rowl*grav) enddo ! cam verif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtprecip(iso_eau,il), & & precip(il),'cv3_routines 3139', & & errmax,errmaxrel) endif !if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur(xtprecip(1,il),'cv3_routine 3166') #endif #endif ! end cam verif #endif END IF END IF END DO ! print*,'cv3_yield apres calcul precip' ! === calculate vertical profile of precipitation in kg/m2/s === DO i = 1, nl DO il = 1, ncum IF (ep(il,inb(il))>=0.0001 .AND. i<=inb(il) .AND. iflag(il)<=1) THEN IF (cvflag_ice) THEN Vprecip(il, i) = wt(il, i)*sigd(il)*(water(il,i)+ice(il,i))/grav Vprecipi(il, i) = wt(il, i)*sigd(il)*ice(il,i)/grav ! jyg #ifdef ISO do ixt=1,ntraciso xtVPrecip(ixt,il,i) = wt(il,i)*sigd(il)*(xtwater(ixt,il,i)+xtice(ixt,il,i))/grav xtVprecipi(ixt,il, i) = wt(il, i)*sigd(il)*xtice(ixt,il,i)/grav enddo #endif ELSE Vprecip(il, i) = wt(il, i)*sigd(il)*water(il, i)/grav Vprecipi(il, i) = 0. ! jyg #ifdef ISO do ixt=1,ntraciso xtVPrecip(ixt,il,i) = wt(il,i)*sigd(il)*xtwater(ixt,il,i)/grav xtVprecipi(ixt,il, i) = 0. enddo #endif END IF END IF END DO END DO ! *** Calculate downdraft velocity scale *** ! *** NE PAS UTILISER POUR L'INSTANT *** !! do il=1,ncum !! wd(il)=betad*abs(mp(il,icb(il)))*0.01*rrd*t(il,icb(il)) & !! /(sigd(il)*p(il,icb(il))) !! enddo ! *** calculate tendencies of lowest level potential temperature *** ! *** and mixing ratio *** DO il = 1, ncum work(il) = 1.0/(ph(il,1)-ph(il,2)) cbmf(il) = 0.0 END DO ! - Adiabatic ascent mass flux "ma" and cloud base mass flux "cbmf" !----------------------------------------------------------------- !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (adiab_ascent_mass_flux_depends_on_ejectliq) THEN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Warning : this option leads to water conservation violation !!! Expert only !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DO il = 1, ncum ma(il, nlp) = 0. ma(il, 1) = 0. END DO DO k = nl, 2, -1 DO il = 1, ncum ma(il, k) = ma(il, k+1)*(1.-qta(il, k))/(1.-qta(il, k-1)) + m(il, k) cbmf(il) = max(cbmf(il), ma(il,k)) END DO END DO DO k = 2,nl DO il = 1, ncum IF (k =icb(il)) THEN cbmf(il) = cbmf(il) + m(il, k) END IF END DO END DO DO il = 1, ncum ma(il, nlp) = 0. ma(il, 1) = 0. END DO DO k = nl, 2, -1 DO il = 1, ncum ma(il, k) = ma(il, k+1) + m(il, k) END DO END DO DO k = 2,nl DO il = 1, ncum IF (k =delti) iflag(il) = 1 !consist vect !jyg< IF (fl_cor_ebil >= 2) THEN ft(il, 1) = ft(il, 1) + 0.01*grav*work(il)*am(il) * & ((t(il,2)-t(il,1))*cpn(il,2)+gz(il,2)-gz(il,1))/cpn(il,1) ELSE ft(il, 1) = ft(il, 1) + 0.01*grav*work(il)*am(il) * & (t(il,2)-t(il,1)+(gz(il,2)-gz(il,1))/cpn(il,1)) ENDIF !>jyg END IF ! iflag END DO DO j = 2, nl IF (iflag_mix>0) THEN DO il = 1, ncum ! FH WARNING a modifier : cpinv = 0. ! cpinv=1.0/cpn(il,1) IF (j<=inb(il) .AND. iflag(il)<=1) THEN ft(il, 1) = ft(il, 1) + 0.01*grav*work(il)*ment(il, j, 1) * & (hent(il,j,1)-h(il,1)+t(il,1)*(cpv-cpd)*(rr(il,1)-qent(il,j,1)))*cpinv END IF ! j END DO END IF END DO ! fin sature DO il = 1, ncum IF (iflag(il)<=1) THEN !JYG1 Correction pour mieux conserver l'eau (conformite avec CONVECT4.3) fr(il, 1) = 0.01*grav*mp(il, 2)*(rp(il,2)-rr_wake(il,1))*work(il) + & sigd(il)*evap(il, 1) !!! sigd(il)*0.5*(evap(il,1)+evap(il,2)) fqd(il, 1) = fr(il, 1) !precip fr(il, 1) = fr(il, 1) + 0.01*grav*am(il)*(rr(il,2)-rr(il,1))*work(il) !sature #ifdef ISO do ixt = 1, ntraciso fxt(ixt,il,1)= & & 0.01*grav*mp(il,2)*(xtp(ixt,il,2) & & -xt_wake(ixt,il,1))*work(il) & & +sigd(il)*xtevap(ixt,il,1) fxtd(ixt,il,1)=fxt(ixt,il,1) !precip fxt(ixt,il,1)=fxt(ixt,il,1) & & +0.01*grav*am(il)*(xt(ixt,il,2)-xt(ixt,il,1))*work(il) enddo ! pour water tagging option 6: pas besoin ici de faire de conversion. #ifdef DIAGISO fq_ddft(il,1)=fq_ddft(il,1) & & +0.01*grav*mp(il,2)*(rp(il,2)-rr_wake(il,1))*work(il) fq_evapprecip(il,1)=fq_evapprecip(il,1) & & +sigd(il)*evap(il,1) fq_fluxmasse(il,1)=fq_fluxmasse(il,1) & & +0.01*grav*am(il)*(rr(il,2)-rr(il,1))*work(il) do ixt = 1, niso fxt_fluxmasse(ixt,il,1)=fxt_fluxmasse(ixt,il,1) & & +0.01*grav*am(il)*(xt(ixt,il,2)-xt(ixt,il,1))*work(il) fxt_ddft(ixt,il,1)=fxt_ddft(ixt,il,1) & & +0.01*grav*mp(il,2)*(xtp(ixt,il,2)-xt_wake(ixt,il,1))*work(il) fxt_evapprecip(ixt,il,1)=fxt_evapprecip(ixt,il,1) & & +sigd(il)*xtevap(ixt,il,1) enddo #endif ! cam verif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,il,1), & & fr(il,1),'cv3_routines 3251', & & errmax*0.1,errmaxrel) call iso_verif_egalite_choix(fxtd(iso_eau,il,1), & & fqd(il,1),'cv3_routines 3748', & & errmax*0.1,errmaxrel) endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,1)+delt*fr(il,1).gt.ridicule)) then call iso_verif_aberrant((xt(iso_HDO,il,1) & & +delt*fxt(iso_HDO,il,1))/(rr(il,1)+delt*fr(il,1)), & & 'cv3_yield 3125, ddft en 1') endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0).and. & & (rr(il,1)+delt*fr(il,1).gt.ridicule)) then call iso_verif_O18_aberrant((xt(iso_HDO,il,1) & & +delt*fxt(iso_HDO,il,1))/(rr(il,1)+delt*fr(il,1)),(xt(iso_O18,il,1) & & +delt*fxt(iso_O18,il,1))/(rr(il,1)+delt*fr(il,1)), & & 'cv3_yield 3125b, ddft en 1') endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur_justmass(fxt(1,il,1),'cv3_routine 3417') do ixt=1,ntraciso xtnew(ixt)=xt(ixt,il,1)+delt*fxt(ixt,il,1) enddo if (iso_verif_tracpos_choix_nostop(xtnew,'cv3_yield 3395',1e-5) & & .eq.1) then write(*,*) 'il=',il write(*,*) 'delt,fxt(:,il,1)=',delt,fxt(:,il,1) write(*,*) 'xt(:,il,1)=' ,xt(:,il,1) #ifdef DIAGISO write(*,*) 'fxt_fluxmasse(:,il,1)=',fxt_fluxmasse(:,il,1) write(*,*) 'fxt_ddft(:,il,1)=',fxt_ddft(:,il,1) write(*,*) 'fxt_evapprecip(:,il,1)=', & & fxt_evapprecip(:,il,1) write(*,*) 'xt(:,il,2)=',xt(:,il,2) write(*,*) 'xtp(:,il,2)=',xtp(:,il,2) write(*,*) 'xtevap(:,il,1)=',xtevap(:,il,1) write(*,*) 'xtevap(:,il,2)=',xtevap(:,il,2) write(*,*) 'facam,facmp,facev=',0.01*grav*am(il)*work(il), & & 0.01*grav*mp(il,2)*work(il),sigd(il)*0.5 #endif ! stop endif #endif #endif ! end cam verif #endif fu(il, 1) = fu(il, 1) + 0.01*grav*work(il)*(mp(il,2)*(up(il,2)-u(il,1)) + & am(il)*(u(il,2)-u(il,1))) fv(il, 1) = fv(il, 1) + 0.01*grav*work(il)*(mp(il,2)*(vp(il,2)-v(il,1)) + & am(il)*(v(il,2)-v(il,1))) END IF ! iflag END DO ! il !AC! do j=1,ntra !AC! do il=1,ncum !AC! if (iflag(il) .le. 1) then !AC! if (cvflag_grav) then !AC! ftra(il,1,j)=ftra(il,1,j)+0.01*grav*work(il) !AC! : *(mp(il,2)*(trap(il,2,j)-tra(il,1,j)) !AC! : +am(il)*(tra(il,2,j)-tra(il,1,j))) !AC! else !AC! ftra(il,1,j)=ftra(il,1,j)+0.1*work(il) !AC! : *(mp(il,2)*(trap(il,2,j)-tra(il,1,j)) !AC! : +am(il)*(tra(il,2,j)-tra(il,1,j))) !AC! endif !AC! endif ! iflag !AC! enddo !AC! enddo DO j = 2, nl DO il = 1, ncum IF (j<=inb(il) .AND. iflag(il)<=1) THEN fr(il, 1) = fr(il, 1) + 0.01*grav*work(il)*ment(il, j, 1)*(qent(il,j,1)-rr(il,1)) #ifdef ISO do ixt = 1, ntraciso fxt(ixt,il,1)=fxt(ixt,il,1) & & +0.01*grav*work(il)*ment(il,j,1)*(xtent(ixt,il,j,1)-xt(ixt,il,1)) enddo #ifdef DIAGISO fq_detrainement(il,1)=fq_detrainement(il,1) & & +0.01*grav*work(il)*ment(il,j,1)*(qent(il,j,1)-rr(il,1)) f_detrainement(il,1)=f_detrainement(il,1) & & +0.01*grav*work(il)*ment(il,j,1) q_detrainement(il,1)=q_detrainement(il,1) & & +0.01*grav*work(il)*ment(il,j,1)*qent(il,j,1) do ixt = 1, niso fxt_detrainement(ixt,il,1)=fxt_detrainement(ixt,il,1) & & +0.01*grav*work(il)*ment(il,j,1) & & *(xtent(ixt,il,j,1)-xt(ixt,il,1)) xt_detrainement(ixt,il,1)=xt_detrainement(ixt,il,1) & & +0.01*grav*work(il)*ment(il,j,1)*xtent(ixt,il,j,1) enddo #endif ! cam verif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,il,1), & & fr(il,1),'cv3_routines 3251',errmax*0.1,errmaxrel) endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,1)+delt*fr(il,1).gt.ridicule)) then call iso_verif_aberrant((xt(iso_HDO,il,1) & & +delt*fxt(iso_HDO,il,1))/(rr(il,1)+delt*fr(il,1)), & & 'cv3_yield 3127, dtr melanges') endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0).and. & & (rr(il,1)+delt*fr(il,1).gt.ridicule)) then call iso_verif_O18_aberrant((xt(iso_HDO,il,1) & & +delt*fxt(iso_HDO,il,1))/(rr(il,1)+delt*fr(il,1)),(xt(iso_O18,il,1) & & +delt*fxt(iso_O18,il,1))/(rr(il,1)+delt*fr(il,1)), & & 'cv3_yield 3127b, dtr melanges') endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur_justmass(fxt(1,il,1),'cv3_routine 3417') do ixt=1,ntraciso xtnew(ixt)=xt(ixt,il,1)+delt*fxt(ixt,il,1) enddo if (iso_verif_tracpos_choix_nostop(xtnew,'cv3_yield 3525',1e-5) & & .eq.1) then write(*,*) 'il=',il write(*,*) 'delt,fxt(:,il,1)=',delt,fxt(:,il,1) write(*,*) 'fac=', 0.01*grav*work(il)*ment(il,j,1) write(*,*) 'xt(:,il,1)=' ,xt(:,il,1) write(*,*) 'xtent(:,il,j,1)=' ,xtent(:,il,j,1) ! stop endif #endif #endif ! end cam verif #endif fu(il, 1) = fu(il, 1) + 0.01*grav*work(il)*ment(il, j, 1)*(uent(il,j,1)-u(il,1)) fv(il, 1) = fv(il, 1) + 0.01*grav*work(il)*ment(il, j, 1)*(vent(il,j,1)-v(il,1)) END IF ! j END DO END DO !AC! do k=1,ntra !AC! do j=2,nl !AC! do il=1,ncum !AC! if (j.le.inb(il) .and. iflag(il) .le. 1) then !AC! !AC! if (cvflag_grav) then !AC! ftra(il,1,k)=ftra(il,1,k)+0.01*grav*work(il)*ment(il,j,1) !AC! : *(traent(il,j,1,k)-tra(il,1,k)) !AC! else !AC! ftra(il,1,k)=ftra(il,1,k)+0.1*work(il)*ment(il,j,1) !AC! : *(traent(il,j,1,k)-tra(il,1,k)) !AC! endif !AC! !AC! endif !AC! enddo !AC! enddo !AC! enddo ! print*,'cv3_yield apres ft' !jyg< !----------------------------------------------------------- IF (ok_optim_yield) THEN !| !----------------------------------------------------------- ! !*** *** !*** Compute convective mass fluxes upwd and dnwd *** ! ! ================================================= ! upward fluxes | ! ------------------------------------------------ ! upwd(:,:) = 0. up_to(:,:) = 0. up_from(:,:) = 0. ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (adiab_ascent_mass_flux_depends_on_ejectliq) THEN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! The decrease of the adiabatic ascent mass flux due to ejection of precipitation !! is taken into account. !! WARNING : in the present version, taking into account the mass-flux decrease due to !! precipitation ejection leads to water conservation violation. ! ! - Upward mass flux of mixed draughts !--------------------------------------- DO i = 2, nl DO j = 1, i-1 DO il = 1, ncum IF (i<=inb(il)) THEN up_to(il,i) = up_to(il,i) + ment(il,j,i) ENDIF ENDDO ENDDO ENDDO ! DO j = 3, nl DO i = 2, j-1 DO il = 1, ncum IF (j<=inb(il)) THEN up_from(il,i) = up_from(il,i) + ment(il,i,j) ENDIF ENDDO ENDDO ENDDO ! ! The difference between upwd(il,i) and upwd(il,i-1) is due to updrafts ending in layer !(i-1) (theses drafts cross interface (i-1) but not interface(i)) and to updrafts starting !from layer (i-1) (theses drafts cross interface (i) but not interface(i-1)): ! DO i = 2, nlp DO il = 1, ncum IF (i<=inb(il)+1) THEN upwd(il,i) = max(0., upwd(il,i-1) - up_to(il,i-1) + up_from(il,i-1)) ENDIF ENDDO ENDDO ! ! - Total upward mass flux !--------------------------- DO i = 2, nlp DO il = 1, ncum IF (i<=inb(il)+1) THEN upwd(il,i) = upwd(il,i) + ma(il,i) ENDIF ENDDO ENDDO !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ELSE ! (adiab_ascent_mass_flux_depends_on_ejectliq) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! The decrease of the adiabatic ascent mass flux due to ejection of precipitation !! is not taken into account. ! ! - Upward mass flux !------------------- DO i = 2, nl DO il = 1, ncum IF (i<=inb(il)) THEN up_to(il,i) = m(il,i) ENDIF ENDDO DO j = 1, i-1 DO il = 1, ncum IF (i<=inb(il)) THEN up_to(il,i) = up_to(il,i) + ment(il,j,i) ENDIF ENDDO ENDDO ENDDO ! DO i = 1, nl DO il = 1, ncum IF (i<=inb(il)) THEN up_from(il,i) = cbmf(il)*wghti(il,i) ENDIF ENDDO ENDDO ! DO j = 3, nl DO i = 2, j-1 DO il = 1, ncum IF (j<=inb(il)) THEN up_from(il,i) = up_from(il,i) + ment(il,i,j) ENDIF ENDDO ENDDO ENDDO ! ! The difference between upwd(il,i) and upwd(il,i-1) is due to updrafts ending in layer !(i-1) (theses drafts cross interface (i-1) but not interface(i)) and to updrafts starting !from layer (i-1) (theses drafts cross interface (i) but not interface(i-1)): ! DO i = 2, nlp DO il = 1, ncum IF (i<=inb(il)+1) THEN upwd(il,i) = max(0., upwd(il,i-1) - up_to(il,i-1) + up_from(il,i-1)) ENDIF ENDDO ENDDO ENDIF ! (adiab_ascent_mass_flux_depends_on_ejectliq) ELSE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! ================================================= ! downward fluxes | ! ------------------------------------------------ dnwd(:,:) = 0. dn_to(:,:) = 0. dn_from(:,:) = 0. DO i = 1, nl DO j = i+1, nl DO il = 1, ncum IF (j<=inb(il)) THEN dn_to(il,i) = dn_to(il,i) + ment(il,j,i) ENDIF ENDDO ENDDO ENDDO ! DO j = 1, nl DO i = j+1, nl DO il = 1, ncum IF (i<=inb(il)) THEN dn_from(il,i) = dn_from(il,i) + ment(il,i,j) ENDIF ENDDO ENDDO ENDDO ! ! The difference between dnwd(il,i) and dnwd(il,i+1) is due to downdrafts ending in layer !(i) (theses drafts cross interface (i+1) but not interface(i)) and to downdrafts !starting from layer (i) (theses drafts cross interface (i) but not interface(i+1)): ! DO i = nl-1, 1, -1 DO il = 1, ncum dnwd(il,i) = max(0., dnwd(il,i+1) - dn_to(il,i) + dn_from(il,i)) ENDDO ENDDO ! ================================================= ! !----------------------------------------------------------- ENDIF !(ok_optim_yield) !| !----------------------------------------------------------- !>jyg ! *** calculate tendencies of potential temperature and mixing ratio *** ! *** at levels above the lowest level *** ! *** first find the net saturated updraft and downdraft mass fluxes *** ! *** through each level *** !jyg< !! DO i = 2, nl + 1 ! newvecto: mettre nl au lieu nl+1? DO i = 2, nl !>jyg num1 = 0 DO il = 1, ncum IF (i<=inb(il) .AND. iflag(il)<=1) num1 = num1 + 1 END DO IF (num1<=0) GO TO 500 ! !jyg< !----------------------------------------------------------- IF (ok_optim_yield) THEN !| !----------------------------------------------------------- DO il = 1, ncum amp1(il) = upwd(il,i+1) ad(il) = dnwd(il,i) ENDDO !----------------------------------------------------------- ELSE !(ok_optim_yield) !| !----------------------------------------------------------- !>jyg DO il = 1,ncum amp1(il) = 0. ad(il) = 0. ENDDO DO k = 1, nl + 1 DO il = 1, ncum IF (i>=icb(il)) THEN IF (k>=i+1 .AND. k<=(inb(il)+1)) THEN amp1(il) = amp1(il) + m(il, k) END IF ELSE ! AMP1 is the part of cbmf taken from layers I and lower IF (k<=i) THEN amp1(il) = amp1(il) + cbmf(il)*wghti(il, k) END IF END IF END DO END DO DO j = i + 1, nl + 1 DO k = 1, i !yor! reverted j and k loops DO il = 1, ncum !yor! IF (i<=inb(il) .AND. j<=(inb(il)+1)) THEN ! the second condition implies the first ! IF (j<=(inb(il)+1)) THEN amp1(il) = amp1(il) + ment(il, k, j) END IF END DO END DO END DO DO k = 1, i - 1 !jyg< !! DO j = i, nl + 1 ! newvecto: nl au lieu nl+1? DO j = i, nl !>jyg DO il = 1, ncum !yor! IF (i<=inb(il) .AND. j<=inb(il)) THEN ! the second condition implies the 1st ! IF (j<=inb(il)) THEN ad(il) = ad(il) + ment(il, j, k) END IF END DO END DO END DO ! !----------------------------------------------------------- ENDIF !(ok_optim_yield) !| !----------------------------------------------------------- ! !! print *,'yield, i, amp1, ad', i, amp1(1), ad(1) DO il = 1, ncum IF (i<=inb(il) .AND. iflag(il)<=1) THEN dpinv = 1.0/(ph(il,i)-ph(il,i+1)) cpinv = 1.0/cpn(il, i) ! convect3 if((0.1*dpinv*amp1).ge.delti)iflag(il)=4 IF ((0.01*grav*dpinv*amp1(il))>=delti) iflag(il) = 1 ! vecto ! precip ! cc ft(il,i)= -0.5*sigd(il)*lvcp(il,i)*(evap(il,i)+evap(il,i+1)) IF (cvflag_ice) THEN ft(il, i) = -sigd(il)*lvcp(il, i)*evap(il, i) - & sigd(il)*lfcp(il, i)*evap(il, i)*faci(il, i) - & sigd(il)*lfcp(il, i)*fondue(il, i)*wt(il, i)/(100.*(p(il,i-1)-p(il,i))) ELSE ft(il, i) = -sigd(il)*lvcp(il, i)*evap(il, i) END IF rat = cpn(il, i-1)*cpinv ft(il, i) = ft(il, i) - 0.009*grav*sigd(il) * & (mp(il,i+1)*t_wake(il,i)*b(il,i)-mp(il,i)*t_wake(il,i-1)*rat*b(il,i-1))*dpinv IF (cvflag_ice) THEN ft(il, i) = ft(il, i) + 0.01*sigd(il)*wt(il, i)*(cl-cpd)*water(il, i+1) * & (t_wake(il,i+1)-t_wake(il,i))*dpinv*cpinv + & 0.01*sigd(il)*wt(il, i)*(ci-cpd)*ice(il, i+1) * & (t_wake(il,i+1)-t_wake(il,i))*dpinv*cpinv ELSE ft(il, i) = ft(il, i) + 0.01*sigd(il)*wt(il, i)*(cl-cpd)*water(il, i+1) * & (t_wake(il,i+1)-t_wake(il,i))*dpinv* & cpinv END IF ftd(il, i) = ft(il, i) ! fin precip ! sature !jyg< IF (fl_cor_ebil >= 2) THEN ft(il, i) = ft(il, i) + 0.01*grav*dpinv * & ( amp1(il)*( (t(il,i+1)-t(il,i))*cpn(il,i+1) + gz(il,i+1)-gz(il,i))*cpinv - & ad(il)*( (t(il,i)-t(il,i-1))*cpn(il,i-1) + gz(il,i)-gz(il,i-1))*cpinv) ELSE ft(il, i) = ft(il, i) + 0.01*grav*dpinv * & (amp1(il)*(t(il,i+1)-t(il,i) + (gz(il,i+1)-gz(il,i))*cpinv) - & ad(il)*(t(il,i)-t(il,i-1)+(gz(il,i)-gz(il,i-1))*cpinv)) ENDIF !>jyg IF (iflag_mix==0) THEN ft(il, i) = ft(il, i) + 0.01*grav*dpinv*ment(il, i, i)*(hp(il,i)-h(il,i) + & t(il,i)*(cpv-cpd)*(rr(il,i)-qent(il,i,i)))*cpinv END IF ! ! sb: on ne fait pas encore la correction permettant de mieux ! conserver l'eau: !JYG: correction permettant de mieux conserver l'eau: ! cc fr(il,i)=0.5*sigd(il)*(evap(il,i)+evap(il,i+1)) fr(il, i) = sigd(il)*evap(il, i) + 0.01*grav*(mp(il,i+1)*(rp(il,i+1)-rr_wake(il,i)) - & mp(il,i)*(rp(il,i)-rr_wake(il,i-1)))*dpinv fqd(il, i) = fr(il, i) ! precip #ifdef ISO do ixt = 1, niso fxt(ixt,il,i)=sigd(il)*xtevap(ixt,il,i) & & +0.01*grav*(mp(il,i+1)*(xtp(ixt,il,i+1)-xt_wake(ixt,il,i)) & & -mp(il,i)*(xtp(ixt,il,i)-xt_wake(ixt,il,i-1)))*dpinv fxtd(ixt,il,i)=fxt(ixt,il,i) ! precip enddo #ifdef DIAGISO fq_evapprecip(il,i)=fq_evapprecip(il,i) +sigd(il)*evap(il,i) fq_ddft(il,i)=fq_ddft(il,i) & +0.01*grav*(mp(il,i+1)*(rp(il,i+1)-rr_wake(il,i)) & -mp(il,i)* (rp(il,i)-rr_wake(il,i-1)))*dpinv do ixt = 1, niso fxt_evapprecip(ixt,il,i)=fxt_evapprecip(ixt,il,i) & & +sigd(il)*xtevap(ixt,il,i) fxt_ddft(ixt,il,i)=fxt_ddft(ixt,il,i) & & +0.01*grav*(mp(il,i+1)*(xtp(ixt,il,i+1)-xt_wake(ixt,il,i)) & & -mp(il,i)*(xtp(ixt,il,i)-xt_wake(ixt,il,i-1)))*dpinv enddo #endif #ifdef ISOVERIF do ixt=1,ntraciso if (iso_verif_noNaN_nostop(fxtd(ixt,il,i),'cv3_yield 4428') & & .eq.1) then write(*,*) 'xtevap(ixt,il,i)=',xtevap(ixt,il,i) write(*,*) 'xtp(ixt,il,i+1)=',xtp(ixt,il,i+1) write(*,*) 'xt_wake(ixt,il,i)=',xt_wake(ixt,il,i) write(*,*) 'xtp(ixt,il,i)=',xtp(ixt,il,i) write(*,*) 'xt_wake(ixt,il,i-1)=',xt_wake(ixt,il,i-1) write(*,*) 'mp(il,i:i+1)=',mp(il,i:i+1) write(*,*) 'fxtd(ixt,il,i)=',fxtd(ixt,il,i) write(*,*) 'fxt(ixt,il,i)=',fxt(ixt,il,i) stop endif enddo #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 4162',errmax*0.1,errmaxrel) if (iso_verif_egalite_choix_nostop(fxtd(iso_eau,il,i), & & fqd(il,i),'cv3_routines 4164', & & errmax*0.1,errmaxrel).eq.1) then write(*,*) 'i,il=',i,il stop endif !if (iso_verif_egalite_choix_nostop(fxtd(iso_eau,il,i), endif if ((iso_HDO.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then if (iso_verif_aberrant_nostop((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 4175') & & .eq.1) then if (rr(il,i).ne.0.0) then write(*,*) 'il,i,rr,deltaD=',il,i,rr(il,i),deltaD & & (xt(iso_HDO,il,i)/rr(il,i)) endif if (fr(il,i).ne.0.0) then write(*,*) 'fr,fxt,deltaD=',fr(il,i),fxt(iso_HDO,il,i), & & deltaD(fxt(iso_HDO,il,i)/fr(il,i)) endif #ifdef DIAGISO if (fq_ddft(il,i).ne.0.0) then write(*,*) 'fq_ddft,deltaD=',fq_ddft(il,i),deltaD( & & fxt_ddft(iso_HDO,il,i)/fq_ddft(il,i)) endif if (fq_evapprecip(il,i).ne.0.0) then write(*,*) 'fq_evapprecip,deltaD=',fq_evapprecip(il,i),deltaD( & & fxt_evapprecip(iso_HDO,il,i)/fq_evapprecip(il,i)) endif #endif write(*,*) 'sigd,evap(il,i),evap(il,i+1)=', & & sigd(il),evap(il,i),evap(il,i+1) write(*,*) 'xtevap(ixt,il,i),xtevap(ixt,il,i+1)=', & & xtevap(ixt,il,i),xtevap(ixt,il,i+1) write(*,*) 'grav,mp(il,i+1),mp(il,i),dpinv=', & & grav,mp(il,i+1),mp(il,i),dpinv write(*,*) 'rp(il,i+1),rr(il,i),rp(il,i),rr(il,i-1)=', & & rp(il,i+1),rr(il,i),rp(il,i),rr(il,i-1) write(*,*) 'xtp(il,i+1),xt(il,i),xtp(il,i),xt(il,i-1)=', & & xtp(iso_HDO,il,i+1),xt(iso_HDO,il,i), & & xtp(iso_HDO,il,i),xt(iso_HDO,il,i-1) stop endif endif !if (iso_HDO.gt.0) then #endif #ifdef ISOTRAC if ((option_traceurs.ne.6).and.(option_traceurs.ne.19)) then ! facile: on fait comme l'eau do ixt = 1+niso,ntraciso fxt(ixt,il,i)=fxt(ixt,il,i) & & +sigd(il)*(xtevap(ixt,il,i)+xtevap(ixt,il,i+1)) & & +0.01*grav*(mp(il,i+1)*(xtp(ixt,il,i+1)-xt(ixt,il,i)) & & -mp(il,i)*(xtp(ixt,il,i)-xt(ixt,il,i-1)))*dpinv enddo !do ixt = 1+niso,ntraciso else ! taggage des ddfts: ! la formule pour fq_ddft suppose que le ddft est en RP. Ce n'est pas le ! cas pour le water tagging puisqu'il y a conversion des molecules ! blances entrainees en molecule rouges. ! Il faut donc prendre en compte ce taux de conversion quand ! entrainement d'env vers ddft ! conversion(iiso)=0.01*grav*dpinv ! : *(mp(il,i)-mp(il,i+1))*xt(ixt_poubelle,il,i) ! fxt(ixt_ddft,il,i)=fxt(ixt_ddft,il,i)+conversion(iiso) ! fxt(ixt_poubelle,il,i)=fxt(ixt_poubelle,il,i) ! : -conversion(iiso) ! Pb: quand on discretise, dqp/dt n'est pas verifee numeriquement. ! on se retrouve donc avec des d Ye/dt differents de 0 meme si ye=0 ( on ! note X les molecules poubelles et Y les molecules ddfts). ! Solution alternative: Dans le cas entrainant, Ye ne varie que par ! ascendance compensatoire des ddfts et par perte de Ye vers le ddft. On ! calcule donc ce terme directement avec schema amont: ! ajout deja de l'evap do ixt = 1+niso,ntraciso fxt(ixt,il,i)=fxt(ixt,il,i) & & +sigd(il)*(xtevap(ixt,il,i)+xtevap(ixt,il,i+1)) enddo !do ixt = 1+niso,ntraciso ! ajout du terme des ddfts sensi stricto ! write(*,*) 'tmp cv3_yield 4165: i,il=',i,il ! if (option_traceurs.eq.6) then do iiso = 1, niso ixt_ddft=itZonIso(izone_ddft,iiso) if (mp(il,i).gt.mp(il,i+1)) then fxtYe(iiso)=0.01*grav*dpinv*mp(il,i) & & *(xt(ixt_ddft,il,i-1)-xt(ixt_ddft,il,i)) else !if (mp(il,i).gt.mp(il,i+1)) then fxtYe(iiso)=0.01*grav*dpinv*(mp(il,i) & & *xt(ixt_ddft,il,i-1)-mp(il,i+1)*xt(ixt_ddft,il,i) & & +(mp(il,i+1)-mp(il,i))*xtp(ixt_ddft,il,i)) endif !if (mp(il,i).gt.mp(il,i+1)) then fxtqe(iiso)=0.01*grav*dpinv* & & (mp(il,i+1)*(xtp(iiso,il,i+1)-xt(iiso,il,i)) & & -mp(il,i)*(xtp(iiso,il,i)-xt(iiso,il,i-1))) ixt_poubelle=itZonIso(izone_poubelle,iiso) fxt(ixt_ddft,il,i)=fxt(ixt_ddft,il,i)+fxtYe(iiso) fxt(ixt_poubelle,il,i)=fxt(ixt_poubelle,il,i) & & +fxtqe(iiso)-fxtYe(iiso) enddo !do iiso = 1, niso else !if (option_traceurs.eq.6) then if (mp(il,i).gt.mp(il,i+1)) then ! cas entrainant: faire attention do iiso = 1, niso fxtqe(iiso)=0.01*grav*dpinv* & & (mp(il,i+1)*(xtp(iiso,il,i+1)-xt(iiso,il,i)) & & -mp(il,i)*(xtp(iiso,il,i)-xt(iiso,il,i-1))) ixt_ddft=itZonIso(izone_ddft,iiso) fxtYe(iiso)=0.01*grav*dpinv*mp(il,i) & & *(xt(ixt_ddft,il,i-1)-xt(ixt_ddft,il,i)) fxt(ixt_ddft,il,i)=fxt(ixt_ddft,il,i)+fxtYe(iiso) ixt_revap=itZonIso(izone_revap,iiso) fxt_revap(iiso)=0.01*grav*dpinv*(mp(il,i+1)* & & (xtp(ixt_revap,il,i+1)-xt(ixt_revap,il,i)) & & -mp(il,i)*(xtp(ixt_revap,il,i)-xt(ixt_revap,il,i-1))) fxt(ixt_revap,il,i)=fxt(ixt_revap,il,i) & & +fxt_revap(iiso) fxtXe(iiso)=fxtqe(iiso)-fxtYe(iiso)-fxt_revap(iiso) Xe(iiso)=xt(iiso,il,i) & & -xt(ixt_ddft,il,i)-xt(ixt_revap,il,i) if (Xe(iiso).gt.ridicule) then do izone=1,nzone if ((izone.ne.izone_revap).and. & & (izone.ne.izone_ddft)) then ixt=itZonIso(izone,iiso) fxt(ixt,il,i)=fxt(ixt,il,i) & & +xt(ixt,il,i)/Xe(iiso)*fxtXe(iiso) endif !if ((izone.ne.izone_revap).and. enddo !do izone=1,nzone #ifdef ISOVERIF ! write(*,*) 'iiso=',iiso ! write(*,*) 'fxtqe=',fxtqe(iiso) ! write(*,*) 'fxtYe=',fxtYe(iiso) ! write(*,*) 'fxt_revap=',fxt_revap(iiso) ! write(*,*) 'fxtXe=',fxtXe(iiso) ! write(*,*) 'Xe=',Xe(iiso) ! write(*,*) 'xt=',xt(:,il,i) call iso_verif_traceur_justmass(fxt(1,il,i), & & 'cv3_routine 4646') #endif else !if (abs(dXe).gt.ridicule) then ! dans ce cas, fxtXe doit etre faible #ifdef ISOVERIF if (delt*fxtXe(iiso).gt.ridicule) then write(*,*) 'cv3_routines 6563: delt*fxtXe(iiso)=', & & delt*fxtXe(iiso) stop endif #endif do izone=1,nzone if ((izone.ne.izone_revap).and. & & (izone.ne.izone_ddft)) then ixt=itZonIso(izone,iiso) if (izone.eq.izone_poubelle) then fxt(ixt,il,i)=fxt(ixt,il,i)+fxtXe(iiso) else !if (izone.eq.izone_poubelle) then ! pas de tendance pour ce tag la endif !if (izone.eq.izone_poubelle) then endif !if ((izone.ne.izone_revap).and. enddo !do izone=1,nzone #ifdef ISOVERIF call iso_verif_traceur_justmass(fxt(1,il,i), & & 'cv3_routine 4671') #endif endif !if (abs(dXe).gt.ridicule) then enddo !do iiso = 1, niso else !if (mp(il,i).gt.mp(il,i+1)) then ! cas detrainant: pas de problemes do ixt=1+niso,ntraciso fxt(ixt,il,i)=fxt(ixt,il,i) & & +0.01*grav*(mp(il,i+1)*(xtp(ixt,il,i+1)-xt(ixt,il,i)) & & -mp(il,i)*(xtp(ixt,il,i)-xt(ixt,il,i-1)))*dpinv enddo !do ixt=1+niso,ntraciso #ifdef ISOVERIF call iso_verif_traceur_justmass(fxt(1,il,i), & & 'cv3_routine 4685') #endif endif !if (mp(il,i).gt.mp(il,i+1)) then endif !if (option_traceurs.eq.6) then ! write(*,*) 'delt*conversion=',delt*conversion(iso_eau) ! write(*,*) 'delt*fxtYe=',delt*fxtYe(iso_eau) ! write(*,*) 'delt*fxtqe=',delt*fxtqe(iso_eau) endif ! if ((option_traceurs.ne.6).and.(option_traceurs.ne.19)) then #endif ! cam verif #ifdef ISOVERIF do ixt=1,niso call iso_verif_noNAN(fxt(ixt,il,i),'cv3_routines 3496') enddo #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 3493',errmax*0.1,errmaxrel) endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and.(delt*fr(il,i).gt.ridicule)) then if (iso_verif_aberrant_nostop( & & fxt(iso_HDO,il,i)/fr(il,i), & & 'cv3_yield 3662').eq.1) then ! write(*,*) 'il,i,icb(il),inb(il)=',il,i,icb(il),inb(il) ! write(*,*) 'fr(il,i),delt=',fr(il,i),delt #ifdef DIAGISO if (fq_ddft(il,i).ne.0.0) then write(*,*) 'fq_ddft,deltaD=',fq_ddft(il,i),deltaD( & & fxt_ddft(iso_HDO,il,i)/fq_ddft(il,i)) endif !if (fq_ddft(il,i).ne.0.0) then if (fq_evapprecip(il,i).ne.0.0) then write(*,*) 'fq_evapprecip,deltaD=',fq_evapprecip(il,i), & & deltaD(fxt_evapprecip(iso_HDO,il,i) & & /fq_evapprecip(il,i)) endif !if (fq_evapprecip(il,i).ne.0.0) then #endif endif !if (iso_verif_aberrant_nostop( endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.& & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then if (iso_verif_aberrant_nostop((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 3757, ddfts') & & .eq.1) then write(*,*) 'i,il,q,deltaD=',i,il,rr(il,i),deltaD( & & xt(iso_HDO,il,i)/rr(il,i)) write(*,*) 'i,il,fr,deltaD=',i,il,fr(il,i),deltaD( & & fxt(iso_HDO,il,i)/fr(il,i)) stop endif ! if (iso_verif_aberrant_nostop endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC ! write(*,*) 'tmp cv3_yield 4224: i,il=',i,il call iso_verif_traceur_justmass(fxt(1,il,i),'cv3_routine 4107') do ixt=1,ntraciso xtnew(ixt)=xt(ixt,il,i)+delt*fxt(ixt,il,i) enddo if (iso_verif_tracpos_choix_nostop(xtnew, & & 'cv3_yield 4221',1e-5).eq.1) then write(*,*) 'delt*fxt(,il,i)=',delt*fxt(1:ntraciso:2,il,i) write(*,*) 'delt*fxt(,il,i)=',delt*fxt(:,il,i) write(*,*) 'xt(,il,i)=',xt(:,il,i) write(*,*) 'delt,sigd,grav,dpinv=',delt,sigd(il),grav,dpinv write(*,*) 'xtevap(,il,i)=',xtevap(:,il,i) write(*,*) 'xtevap(,il,i+1)=',xtevap(:,il,i+1) write(*,*) 'mp(il,i+1),mp(il,i)=',mp(il,i+1),mp(il,i) write(*,*) 'xtp(,il,i)=',xtp(:,il,i) write(*,*) 'xtp(,il,i+1)=',xtp(:,il,i+1) write(*,*) 'xt(,il,i)=',xt(:,il,i) write(*,*) 'xt(,il,i-1)=',xt(:,il,i-1) ! rappel: fxt(ixt,il,i)=fxt(ixt,il,i) ! 0.5*sigd*(xtevap(ixt,il,i)+xtevap(ixt,il,i+1)) ! : +0.01*grav*(mp(il,i+1)*(xtp(ixt,il,i+1)-xt(ixt,il,i)) ! : -mp(il,i)*(xtp(ixt,il,i)-xt(ixt,il,i-1)))*dpinv ! stop endif #endif #endif #endif fu(il, i) = 0.01*grav*(mp(il,i+1)*(up(il,i+1)-u(il,i)) - & mp(il,i)*(up(il,i)-u(il,i-1)))*dpinv fv(il, i) = 0.01*grav*(mp(il,i+1)*(vp(il,i+1)-v(il,i)) - & mp(il,i)*(vp(il,i)-v(il,i-1)))*dpinv fr(il, i) = fr(il, i) + 0.01*grav*dpinv*(amp1(il)*(rr(il,i+1)-rr(il,i)) - & ad(il)*(rr(il,i)-rr(il,i-1))) #ifdef ISO do ixt = 1, ntraciso fxt(ixt,il,i)=fxt(ixt,il,i)+ & & 0.01*grav*dpinv*(amp1(il)*(xt(ixt,il,i+1)-xt(ixt,il,i)) & & -ad(il)*(xt(ixt,il,i)-xt(ixt,il,i-1))) enddo #ifdef DIAGISO fq_fluxmasse(il,i)=fq_fluxmasse(il,i) & +0.01*grav*dpinv*(amp1(il)*(rr(il,i+1)-rr(il,i)) & -ad(il)*(rr(il,i)-rr(il,i-1))) ! modif 2 fev: pour avoir subsidence compensatoire totale, on retranche ! ad. do ixt = 1, niso fxt_fluxmasse(ixt,il,i)=fxt_fluxmasse(ixt,il,i)+ & & 0.01*grav*dpinv*(amp1(il)*(xt(ixt,il,i+1)-xt(ixt,il,i)) & & -ad(il)*(xt(ixt,il,i)-xt(ixt,il,i-1))) enddo #endif ! cam verif #ifdef ISOVERIF do ixt=1,niso call iso_verif_noNAN(fxt(ixt,il,i),'cv3_routines 3229') enddo #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 3226',errmax*0.1,errmaxrel) endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 3384, flux masse') endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_O18_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i))/(rr(il,i)+delt*fr(il,i)),(xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i))/(rr(il,i)+delt*fr(il,i)), & & 'cv3_yield 3384b, flux masse') endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur_justmass(fxt(1,il,1),'cv3_routine 3626') do ixt=1,ntraciso xtnew(ixt)=xt(ixt,il,i)+delt*fxt(ixt,il,i) enddo if (iso_verif_tracpos_choix_nostop(xtnew,'cv3_yield 3727',1e-5) & & .eq.1) then write(*,*) 'il,i=',il,i write(*,*) 'fxt(:,il,i)=',fxt(:,il,i) write(*,*) 'amp1(il),ad(il),fac=', & & amp1(il),ad(il),0.01*grav*dpinv write(*,*) 'xt(:,il,i+1)=' ,xt(:,il,i+1) write(*,*) 'xt(:,il,i)=' ,xt(:,il,i) write(*,*) 'xt(:,il,i-1)=' ,xt(:,il,i-1) ! stop endif #endif #endif ! end cam verif #endif fu(il, i) = fu(il, i) + 0.01*grav*dpinv*(amp1(il)*(u(il,i+1)-u(il,i)) - & ad(il)*(u(il,i)-u(il,i-1))) fv(il, i) = fv(il, i) + 0.01*grav*dpinv*(amp1(il)*(v(il,i+1)-v(il,i)) - & ad(il)*(v(il,i)-v(il,i-1))) END IF ! i END DO !AC! do k=1,ntra !AC! do il=1,ncum !AC! if (i.le.inb(il) .and. iflag(il) .le. 1) then !AC! dpinv=1.0/(ph(il,i)-ph(il,i+1)) !AC! cpinv=1.0/cpn(il,i) !AC! if (cvflag_grav) then !AC! ftra(il,i,k)=ftra(il,i,k)+0.01*grav*dpinv !AC! : *(amp1(il)*(tra(il,i+1,k)-tra(il,i,k)) !AC! : -ad(il)*(tra(il,i,k)-tra(il,i-1,k))) !AC! else !AC! ftra(il,i,k)=ftra(il,i,k)+0.1*dpinv !AC! : *(amp1(il)*(tra(il,i+1,k)-tra(il,i,k)) !AC! : -ad(il)*(tra(il,i,k)-tra(il,i-1,k))) !AC! endif !AC! endif !AC! enddo !AC! enddo DO k = 1, i - 1 DO il = 1, ncum awat(il) = elij(il, k, i) - (1.-ep(il,i))*clw(il, i) awat(il) = max(awat(il), 0.0) END DO IF (iflag_mix/=0) THEN DO il = 1, ncum IF (i<=inb(il) .AND. iflag(il)<=1) THEN dpinv = 1.0/(ph(il,i)-ph(il,i+1)) cpinv = 1.0/cpn(il, i) ft(il, i) = ft(il, i) + 0.01*grav*dpinv*ment(il, k, i) * & (hent(il,k,i)-h(il,i)+t(il,i)*(cpv-cpd)*(rr(il,i)+awat(il)-qent(il,k,i)))*cpinv ! #ifdef ISO ! on change le traitement de cette ligne le 8 mai 2009: ! avant, on avait: xtawat=xtelij(il,k,i)-(1.-xtep(il,i))*xtclw(il,i) ! c'est a dire que Rawat=Relij+(1-ep)*clw/awat*(Relij-Rclw) ! si Relij!=Rclw, alors un fractionnement isotopique non physique etait ! introduit. ! En fait, awat represente le surplus de condensat dans le melange par ! rapport a celui restant dans la colonne adiabatique ! ce surplus a la meme compo que le elij, sans fractionnement. ! d'ou le nouveau traitement ci-dessous. if (elij(il,k,i).gt.0.0) then do ixt = 1, ntraciso xtawat(ixt,il)=awat(il)*(xtelij(ixt,il,k,i)/elij(il,k,i)) ! xtawat(ixt)=amax1(xtawat(ixt),0.0) ! pas necessaire enddo !do ixt = 1, ntraciso else !if (elij(il,k,i).gt.0.0) then ! normalement, si elij(il,k,i)<=0, alors awat=0 ! on le verifie. Si c'est vrai -> xtawat=0 aussi #ifdef ISOVERIF call iso_verif_egalite(awat(il),0.0,'cv3_yield 3779') #endif do ixt = 1, ntraciso xtawat(ixt,il)=0.0 enddo !do ixt = 1, ntraciso endif !if (elij(il,k,i).gt.0.0) then ! cam verif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(xtawat(iso_eau,il), & & awat(il),'cv3_routines 3301',errmax,errmaxrel) endif !if (iso_eau.gt.0) then #ifdef ISOTRAC call iso_verif_traceur_justmass(xtawat(1,il),'cv3_routine 3729') #endif #endif ! end cam verif #endif ! END IF ! i END DO END IF DO il = 1, ncum IF (i<=inb(il) .AND. iflag(il)<=1) THEN dpinv = 1.0/(ph(il,i)-ph(il,i+1)) cpinv = 1.0/cpn(il, i) fr(il, i) = fr(il, i) + 0.01*grav*dpinv*ment(il, k, i) * & (qent(il,k,i)-awat(il)-rr(il,i)) #ifdef ISO do ixt = 1, ntraciso fxt(ixt,il,i)=fxt(ixt,il,i) & & +0.01*grav*dpinv*ment(il,k,i) & & *(xtent(ixt,il,k,i)-xtawat(ixt,il)-xt(ixt,il,i)) enddo #ifdef DIAGISO fq_detrainement(il,i)=fq_detrainement(il,i) & +0.01*grav*dpinv*ment(il,k,i) & *(qent(il,k,i)-awat(il)-rr(il,i)) f_detrainement(il,i)=f_detrainement(il,i) & +0.01*grav*dpinv*ment(il,k,i) q_detrainement(il,i)=q_detrainement(il,i) & +0.01*grav*dpinv*ment(il,k,i)*qent(il,k,i) do ixt = 1, niso fxt_detrainement(ixt,il,i)=fxt_detrainement(ixt,il,i) & & +0.01*grav*dpinv*ment(il,k,i) & & *(xtent(ixt,il,k,i)-xtawat(ixt,il)-xt(ixt,il,i)) xt_detrainement(ixt,il,i)=xt_detrainement(ixt,il,i) & & +0.01*grav*dpinv*ment(il,k,i)*xtent(ixt,il,k,i) enddo #endif ! cam verif #ifdef ISOVERIF do ixt=1,niso call iso_verif_noNAN(fxt(ixt,il,i),'cv3_routines 3328') enddo #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 3325',errmax,errmaxrel) endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then if (iso_verif_aberrant_nostop((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 3396a, dtr mels') & & .eq.1) then write(*,*) 'rr,delt,fr=',rr(il,i),delt,fr(il,i) write(*,*) 'qent,awat=',qent(il,k,i),awat(il) write(*,*) 'deltaDfr=',deltaD(fxt(iso_hdo,il,i)/fr(il,i)) write(*,*) 'deltaDrr=',deltaD(xt(iso_hdo,il,i)/rr(il,i)) write(*,*) 'deltaDqent=',deltaD(xtent(iso_hdo,il,k,i) & & /qent(il,k,i)) write(*,*) 'deltaDawat=',deltaD(xtawat(iso_hdo,il)/awat(il)) ! stop endif endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur_justmass(fxt(1,il,i),'cv3_routine 3784') do ixt=1,ntraciso xtnew(ixt)=xt(ixt,il,i)+delt*fxt(ixt,il,i) enddo if (iso_verif_tracpos_choix_nostop(xtnew,'cv3_yield 3905',1e-5) & & .eq.1) then write(*,*) 'il,i=',il,i endif ! call iso_verif_tracpos_choix(xtnew,'cv3_yield 3905',1e-5) #endif #endif #endif fu(il, i) = fu(il, i) + 0.01*grav*dpinv*ment(il, k, i)*(uent(il,k,i)-u(il,i)) fv(il, i) = fv(il, i) + 0.01*grav*dpinv*ment(il, k, i)*(vent(il,k,i)-v(il,i)) ! (saturated updrafts resulting from mixing) ! cld qcond(il, i) = qcond(il, i) + (elij(il,k,i)-awat(il)) ! cld qtment(il, i) = qtment(il, i) + qent(il,k,i) ! cld nqcond(il, i) = nqcond(il, i) + 1. ! cld END IF ! i END DO END DO !AC! do j=1,ntra !AC! do k=1,i-1 !AC! do il=1,ncum !AC! if (i.le.inb(il) .and. iflag(il) .le. 1) then !AC! dpinv=1.0/(ph(il,i)-ph(il,i+1)) !AC! cpinv=1.0/cpn(il,i) !AC! if (cvflag_grav) then !AC! ftra(il,i,j)=ftra(il,i,j)+0.01*grav*dpinv*ment(il,k,i) !AC! : *(traent(il,k,i,j)-tra(il,i,j)) !AC! else !AC! ftra(il,i,j)=ftra(il,i,j)+0.1*dpinv*ment(il,k,i) !AC! : *(traent(il,k,i,j)-tra(il,i,j)) !AC! endif !AC! endif !AC! enddo !AC! enddo !AC! enddo !jyg< !! DO k = i, nl + 1 DO k = i, nl !>jyg IF (iflag_mix/=0) THEN DO il = 1, ncum IF (i<=inb(il) .AND. k<=inb(il) .AND. iflag(il)<=1) THEN dpinv = 1.0/(ph(il,i)-ph(il,i+1)) cpinv = 1.0/cpn(il, i) ft(il, i) = ft(il, i) + 0.01*grav*dpinv*ment(il, k, i) * & (hent(il,k,i)-h(il,i)+t(il,i)*(cpv-cpd)*(rr(il,i)-qent(il,k,i)))*cpinv END IF ! i END DO END IF DO il = 1, ncum IF (i<=inb(il) .AND. k<=inb(il) .AND. iflag(il)<=1) THEN dpinv = 1.0/(ph(il,i)-ph(il,i+1)) cpinv = 1.0/cpn(il, i) fr(il, i) = fr(il, i) + 0.01*grav*dpinv*ment(il, k, i)*(qent(il,k,i)-rr(il,i)) #ifdef ISO do ixt = 1, ntraciso fxt(ixt,il,i)=fxt(ixt,il,i) & & +0.01*grav*dpinv*ment(il,k,i)*(xtent(ixt,il,k,i)-xt(ixt,il,i)) enddo #ifdef DIAGISO fq_detrainement(il,i)=fq_detrainement(il,i) & +0.01*grav*dpinv*ment(il,k,i)*(qent(il,k,i)-rr(il,i)) f_detrainement(il,i)=f_detrainement(il,i) & +0.01*grav*dpinv*ment(il,k,i) q_detrainement(il,i)=q_detrainement(il,i) & +0.01*grav*dpinv*ment(il,k,i)*qent(il,k,i) do ixt = 1, niso fxt_detrainement(ixt,il,i)=fxt_detrainement(ixt,il,i) & & +0.01*grav*dpinv*ment(il,k,i)*(xtent(ixt,il,k,i)-xt(ixt,il,i)) xt_detrainement(ixt,il,i)=xt_detrainement(ixt,il,i) & & +0.01*grav*dpinv*ment(il,k,i)*xtent(ixt,il,k,i) enddo #endif ! cam verif #ifdef ISOVERIF do ixt=1,niso call iso_verif_noNAN(fxt(ixt,il,i),'cv3_routines 3436') enddo #endif #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite_choix(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 3433',errmax,errmaxrel) endif !if (iso_eau.gt.0) then ! if ((iso_HDO.gt.0).and.(delt*fr(il,i).gt.ridicule)) then ! if (iso_verif_aberrant_nostop( & ! & fxt(iso_HDO,il,i)/fr(il,i), & ! & 'cv3_yield 3597').eq.1) then ! write(*,*) 'i,icb(il),inb(il)=',i,icb(il),inb(il) ! stop ! endif ! endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 3605b, dtr mels') endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_O18_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i))/(rr(il,i)+delt*fr(il,i)),(xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i))/(rr(il,i)+delt*fr(il,i)), & & 'cv3_yield 6415c, dtr mels') endif !if (iso_HDO.gt.0) then #ifdef ISOTRAC call iso_verif_traceur_justmass(fxt(1,il,i),'cv3_routine 3972') do ixt=1,ntraciso xtnew(ixt)=xt(ixt,il,i)+delt*fxt(ixt,il,i) enddo if (iso_verif_tracpos_choix_nostop(xtnew,'cv3_yield 4091',1e-5) & & .eq.1) then write(*,*) 'il,i=',il,i endif ! call iso_verif_tracpos_choix(xtnew,'cv3_yield 4091',1e-5) #endif #endif ! end cam verif #endif fu(il, i) = fu(il, i) + 0.01*grav*dpinv*ment(il, k, i)*(uent(il,k,i)-u(il,i)) fv(il, i) = fv(il, i) + 0.01*grav*dpinv*ment(il, k, i)*(vent(il,k,i)-v(il,i)) END IF ! i and k END DO !DO il = 1, ncum END DO !DO k = i, nl !AC! do j=1,ntra !AC! do k=i,nl+1 !AC! do il=1,ncum !AC! if (i.le.inb(il) .and. k.le.inb(il) !AC! $ .and. iflag(il) .le. 1) then !AC! dpinv=1.0/(ph(il,i)-ph(il,i+1)) !AC! cpinv=1.0/cpn(il,i) !AC! if (cvflag_grav) then !AC! ftra(il,i,j)=ftra(il,i,j)+0.01*grav*dpinv*ment(il,k,i) !AC! : *(traent(il,k,i,j)-tra(il,i,j)) !AC! else !AC! ftra(il,i,j)=ftra(il,i,j)+0.1*dpinv*ment(il,k,i) !AC! : *(traent(il,k,i,j)-tra(il,i,j)) !AC! endif !AC! endif ! i and k !AC! enddo !AC! enddo !AC! enddo ! sb: interface with the cloud parameterization: ! cld DO k = i + 1, nl DO il = 1, ncum IF (k<=inb(il) .AND. i<=inb(il) .AND. iflag(il)<=1) THEN ! cld ! (saturated downdrafts resulting from mixing) ! cld qcond(il, i) = qcond(il, i) + elij(il, k, i) ! cld qtment(il, i) = qent(il,k,i) + qtment(il,i) ! cld nqcond(il, i) = nqcond(il, i) + 1. ! cld END IF ! cld END DO ! cld END DO ! cld !ym BIG Warning : it seems that the k loop is missing !!! !ym Strong advice to check this !ym add a k loop temporary ! (particular case: no detraining level is found) ! cld ! Verif merge Dynamico<<<<<<< .working DO il = 1, ncum ! cld IF (i<=inb(il) .AND. nent(il,i)==0 .AND. iflag(il)<=1) THEN ! cld qcond(il, i) = qcond(il, i) + (1.-ep(il,i))*clw(il, i) ! cld !jyg< Bug correction 20180620 ! PROBLEM: Should not qent(il,i,i) be taken into account even if nent(il,i)/=0? !! qtment(il, i) = qent(il,k,i) + qtment(il,i) ! cld qtment(il, i) = qent(il,i,i) + qtment(il,i) ! cld !>jyg nqcond(il, i) = nqcond(il, i) + 1. ! cld END IF ! cld END DO ! cld ! Verif merge Dynamico ======= ! Verif merge Dynamico DO k = i + 1, nl ! Verif merge Dynamico DO il = 1, ncum !ym k loop added ! cld ! Verif merge Dynamico IF (i<=inb(il) .AND. nent(il,i)==0 .AND. iflag(il)<=1) THEN ! cld ! Verif merge Dynamico qcond(il, i) = qcond(il, i) + (1.-ep(il,i))*clw(il, i) ! cld ! Verif merge Dynamico qtment(il, i) = qent(il,k,i) + qtment(il,i) ! cld ! Verif merge Dynamico nqcond(il, i) = nqcond(il, i) + 1. ! cld ! Verif merge Dynamico END IF ! cld ! Verif merge Dynamico END DO ! Verif merge Dynamico ENDDO ! cld ! Verif merge Dynamico >>>>>>> .merge-right.r3413 DO il = 1, ncum ! cld IF (i<=inb(il) .AND. nqcond(il,i)/=0 .AND. iflag(il)<=1) THEN ! cld qcond(il, i) = qcond(il, i)/nqcond(il, i) ! cld qtment(il, i) = qtment(il,i)/nqcond(il, i) ! cld END IF ! cld END DO !AC! do j=1,ntra !AC! do il=1,ncum !AC! if (i.le.inb(il) .and. iflag(il) .le. 1) then !AC! dpinv=1.0/(ph(il,i)-ph(il,i+1)) !AC! cpinv=1.0/cpn(il,i) !AC! !AC! if (cvflag_grav) then !AC! ftra(il,i,j)=ftra(il,i,j)+0.01*grav*dpinv !AC! : *(mp(il,i+1)*(trap(il,i+1,j)-tra(il,i,j)) !AC! : -mp(il,i)*(trap(il,i,j)-trap(il,i-1,j))) !AC! else !AC! ftra(il,i,j)=ftra(il,i,j)+0.1*dpinv !AC! : *(mp(il,i+1)*(trap(il,i+1,j)-tra(il,i,j)) !AC! : -mp(il,i)*(trap(il,i,j)-trap(il,i-1,j))) !AC! endif !AC! endif ! i !AC! enddo !AC! enddo 500 END DO !JYG< !Conservation de l'eau ! sumdq = 0. ! DO k = 1, nl ! sumdq = sumdq + fr(1, k)*100.*(ph(1,k)-ph(1,k+1))/grav ! END DO ! PRINT *, 'cv3_yield, apres 500, sum(dq), precip, somme ', sumdq, Vprecip(1, 1), sumdq + vprecip(1, 1) !JYG> ! *** move the detrainment at level inb down to level inb-1 *** ! *** in such a way as to preserve the vertically *** ! *** integrated enthalpy and water tendencies *** ! Correction bug le 18-03-09 DO il = 1, ncum IF (iflag(il)<=1) THEN ax = 0.01*grav*ment(il, inb(il), inb(il))* & (hp(il,inb(il))-h(il,inb(il))+t(il,inb(il))*(cpv-cpd)*(rr(il,inb(il))-qent(il,inb(il),inb(il))))/ & (cpn(il,inb(il))*(ph(il,inb(il))-ph(il,inb(il)+1))) ft(il, inb(il)) = ft(il, inb(il)) - ax ft(il, inb(il)-1) = ft(il, inb(il)-1) + ax*cpn(il, inb(il))*(ph(il,inb(il))-ph(il,inb(il)+1))/ & (cpn(il,inb(il)-1)*(ph(il,inb(il)-1)-ph(il,inb(il)))) bx = 0.01*grav*ment(il, inb(il), inb(il))*(qent(il,inb(il),inb(il))-rr(il,inb(il)))/ & (ph(il,inb(il))-ph(il,inb(il)+1)) fr(il, inb(il)) = fr(il, inb(il)) - bx fr(il, inb(il)-1) = fr(il, inb(il)-1) + bx*(ph(il,inb(il))-ph(il,inb(il)+1))/ & (ph(il,inb(il)-1)-ph(il,inb(il))) #ifdef ISO do ixt=1,ntraciso xtbx(ixt)=0.01*grav*ment(il,inb(il),inb(il)) & & *(xtent(ixt,il,inb(il),inb(il)) & & -xt(ixt,il,inb(il)))/(ph(il,inb(il))-ph(il,inb(il)+1)) fxt(ixt,il,inb(il))=fxt(ixt,il,inb(il))-xtbx(ixt) fxt(ixt,il,inb(il)-1)=fxt(ixt,il,inb(il)-1) & & +xtbx(ixt)*(ph(il,inb(il))-ph(il,inb(il)+1)) & & /(ph(il,inb(il)-1)-ph(il,inb(il))) enddo ! do ixt=1,ntraciso #ifdef DIAGISO fq_detrainement(il,inb(il))=fq_detrainement(il,inb(il))-bx fq_detrainement(il,inb(il)-1)=fq_detrainement(il,inb(il)-1) & +bx*(ph(il,inb(il))-ph(il,inb(il)+1)) & /(ph(il,inb(il)-1)-ph(il,inb(il))) do ixt = 1, niso fxt_detrainement(ixt,il,inb(il))= & & fxt_detrainement(ixt,il,inb(il))-xtbx(ixt) fxt_detrainement(ixt,il,inb(il)-1)= & & fxt_detrainement(ixt,il,inb(il)-1) & & +xtbx(ixt)*(ph(il,inb(il))-ph(il,inb(il)+1)) & & /(ph(il,inb(il)-1)-ph(il,inb(il))) enddo #endif #ifdef ISOVERIF do i=inb(il)-1,inb(il) if (iso_eau.gt.0) then call iso_verif_egalite(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 5308') endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 6555') endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then if (iso_verif_O18_aberrant_nostop((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i))/(rr(il,i)+delt*fr(il,i)),(xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i))/(rr(il,i)+delt*fr(il,i)), & & 'cv3_yield 6555b').eq.1) then write(*,*) 'il,i=',il,i write(*,*) 'deltaOavant=',deltaO(xt(iso_O18,il,i)/rr(il,i)) write(*,*) 'deltaOapres=',deltaO((xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i))/(rr(il,i)+delt*fr(il,i))) write(*,*) 'rr,fq*delt=',rr(il,i),delt*fr(il,i) write(*,*) 'deltaOfq=',deltaO(fxt(iso_O18,il,i)/fr(il,i)) write(*,*) 'xt,fxt*delt=',xt(iso_O18,il,i),delt*fxt(iso_O18,il,i) write(*,*) 'qent(il,inb(il),inb(il)),rr(il,inb(il))=', & & qent(il,inb(il),inb(il)),rr(il,inb(il)) write(*,*) 'xtent(il,inb(il),inb(il)),xt(il,inb(il))=', & & xtent(iso_O18,il,inb(il),inb(il)),xt(iso_O18,il,inb(il)) write(*,*) 'deltaOent=',deltaO(xtent(iso_O18,il,inb(il),inb(il))/qent(il,inb(il),inb(il))) write(*,*) 'bx,xtbx(iso_O18)=',bx,xtbx(iso_O18) stop endif endif !if (iso_HDO.gt.0) then enddo #endif #endif cx = 0.01*grav*ment(il, inb(il), inb(il))*(uent(il,inb(il),inb(il))-u(il,inb(il)))/ & (ph(il,inb(il))-ph(il,inb(il)+1)) fu(il, inb(il)) = fu(il, inb(il)) - cx fu(il, inb(il)-1) = fu(il, inb(il)-1) + cx*(ph(il,inb(il))-ph(il,inb(il)+1))/ & (ph(il,inb(il)-1)-ph(il,inb(il))) dx = 0.01*grav*ment(il, inb(il), inb(il))*(vent(il,inb(il),inb(il))-v(il,inb(il)))/ & (ph(il,inb(il))-ph(il,inb(il)+1)) fv(il, inb(il)) = fv(il, inb(il)) - dx fv(il, inb(il)-1) = fv(il, inb(il)-1) + dx*(ph(il,inb(il))-ph(il,inb(il)+1))/ & (ph(il,inb(il)-1)-ph(il,inb(il))) END IF !iflag END DO !JYG< !Conservation de l'eau ! sumdq = 0. ! DO k = 1, nl ! sumdq = sumdq + fr(1, k)*100.*(ph(1,k)-ph(1,k+1))/grav ! END DO ! PRINT *, 'cv3_yield, apres 503, sum(dq), precip, somme ', sumdq, Vprecip(1, 1), sumdq + vprecip(1, 1) !JYG> !AC! do j=1,ntra !AC! do il=1,ncum !AC! IF (iflag(il) .le. 1) THEN !AC! IF (cvflag_grav) then !AC! ex=0.01*grav*ment(il,inb(il),inb(il)) !AC! : *(traent(il,inb(il),inb(il),j)-tra(il,inb(il),j)) !AC! : /(ph(i l,inb(il))-ph(il,inb(il)+1)) !AC! ftra(il,inb(il),j)=ftra(il,inb(il),j)-ex !AC! ftra(il,inb(il)-1,j)=ftra(il,inb(il)-1,j) !AC! : +ex*(ph(il,inb(il))-ph(il,inb(il)+1)) !AC! : /(ph(il,inb(il)-1)-ph(il,inb(il))) !AC! else !AC! ex=0.1*ment(il,inb(il),inb(il)) !AC! : *(traent(il,inb(il),inb(il),j)-tra(il,inb(il),j)) !AC! : /(ph(i l,inb(il))-ph(il,inb(il)+1)) !AC! ftra(il,inb(il),j)=ftra(il,inb(il),j)-ex !AC! ftra(il,inb(il)-1,j)=ftra(il,inb(il)-1,j) !AC! : +ex*(ph(il,inb(il))-ph(il,inb(il)+1)) !AC! : /(ph(il,inb(il)-1)-ph(il,inb(il))) !AC! ENDIF !cvflag grav !AC! ENDIF !iflag !AC! enddo !AC! enddo ! *** homogenize tendencies below cloud base *** DO il = 1, ncum asum(il) = 0.0 bsum(il) = 0.0 csum(il) = 0.0 dsum(il) = 0.0 esum(il) = 0.0 fsum(il) = 0.0 gsum(il) = 0.0 hsum(il) = 0.0 #ifdef ISO do ixt=1,ntraciso fxtsum(ixt,il)=0.0 bxtsum(ixt,il)=0.0 enddo #endif END DO !do i=1,nl !do il=1,ncum !th_wake(il,i)=t_wake(il,i)*(1000.0/p(il,i))**rdcp !enddo !enddo DO i = 1, nl DO il = 1, ncum IF (i<=(icb(il)-1) .AND. iflag(il)<=1) THEN !jyg Saturated part : use T profile asum(il) = asum(il) + (ft(il,i)-ftd(il,i))*(ph(il,i)-ph(il,i+1)) !jyg<20140311 !Correction pour conserver l eau IF (ok_conserv_q) THEN bsum(il) = bsum(il) + (fr(il,i)-fqd(il,i))*(ph(il,i)-ph(il,i+1)) csum(il) = csum(il) + (ph(il,i)-ph(il,i+1)) #ifdef ISO do ixt=1,ntraciso bxtsum(ixt,il)=bxtsum(ixt,il)+(fxt(ixt,il,i)-fxtd(ixt,il,i)) & & *(ph(il,i)-ph(il,i+1)) enddo ! do ixt=1,ntraciso #endif ELSE bsum(il)=bsum(il)+(fr(il,i)-fqd(il,i))*(lv(il,i)+(cl-cpd)*(t(il,i)-t(il,1)))* & (ph(il,i)-ph(il,i+1)) csum(il)=csum(il)+(lv(il,i)+(cl-cpd)*(t(il,i)-t(il,1)))* & (ph(il,i)-ph(il,i+1)) #ifdef ISO do ixt=1,ntraciso bxtsum(ixt,il)=bxtsum(ixt,il)+(fxt(ixt,il,i)-fxtd(ixt,il,i)) & & *(lv(il,i)+(cl-cpd)*(t(il,i)-t(il,1))) & & *(ph(il,i)-ph(il,i+1)) enddo ! do ixt=1,ntraciso #endif ENDIF ! (ok_conserv_q) !jyg> dsum(il) = dsum(il) + t(il, i)*(ph(il,i)-ph(il,i+1))/th(il, i) !jyg Unsaturated part : use T_wake profile esum(il) = esum(il) + ftd(il, i)*(ph(il,i)-ph(il,i+1)) !jyg<20140311 !Correction pour conserver l eau IF (ok_conserv_q) THEN fsum(il) = fsum(il) + fqd(il, i)*(ph(il,i)-ph(il,i+1)) gsum(il) = gsum(il) + (ph(il,i)-ph(il,i+1)) #ifdef ISO do ixt=1,ntraciso fxtsum(ixt,il)=fxtsum(ixt,il)+fxtd(ixt,il,i) & & *(ph(il,i)-ph(il,i+1)) enddo !do ixt=1,ntraciso #endif ELSE fsum(il)=fsum(il)+fqd(il,i)*(lv(il,i)+(cl-cpd)*(t_wake(il,i)-t_wake(il,1)))* & (ph(il,i)-ph(il,i+1)) gsum(il)=gsum(il)+(lv(il,i)+(cl-cpd)*(t_wake(il,i)-t_wake(il,1)))* & (ph(il,i)-ph(il,i+1)) #ifdef ISO do ixt=1,ntraciso fxtsum(ixt,il)=fxtsum(ixt,il)+fxtd(ixt,il,i) & & *(lv(il,i)+(cl-cpd)*(t_wake(il,i)-t_wake(il,1))) & & *(ph(il,i)-ph(il,i+1)) enddo !do ixt=1,ntraciso #endif ENDIF ! (ok_conserv_q) !jyg> hsum(il) = hsum(il) + t_wake(il, i)*(ph(il,i)-ph(il,i+1))/th_wake(il, i) #ifdef ISO #ifdef ISOVERIF if (iso_eau.gt.0) then call iso_verif_egalite(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 5415') call iso_verif_egalite(fxtd(iso_eau,il,i), & & fqd(il,i),'cv3_routines 5417') call iso_verif_egalite(bxtsum(iso_eau,il), & & bsum(il),'cv3_routines 5419') if (iso_verif_egalite_nostop(fxtsum(iso_eau,il), & & fsum(il),'cv3_routines 5421').eq.1) then write(*,*) 'i,il=',i,il write(*,*) 'fxtd(iso_eau,il,:)=',fxtd(iso_eau,il,:) write(*,*) 'fqd(il,:)=',fqd(il,:) stop endif endif !if (iso_eau.gt.0) then #endif #endif END IF END DO END DO !!!! do 700 i=1,icb(il)-1 IF (ok_homo_tend) THEN DO i = 1, nl DO il = 1, ncum IF (i<=(icb(il)-1) .AND. iflag(il)<=1) THEN ftd(il, i) = esum(il)*t_wake(il, i)/(th_wake(il,i)*hsum(il)) fqd(il, i) = fsum(il)/gsum(il) ft(il, i) = ftd(il, i) + asum(il)*t(il, i)/(th(il,i)*dsum(il)) fr(il, i) = fqd(il, i) + bsum(il)/csum(il) #ifdef ISO do ixt=1,ntraciso fxtd(ixt,il,i)=fxtsum(ixt,il)/gsum(il) fxt(ixt,il,i)=fxtd(ixt,il,i)+bxtsum(ixt,il)/csum(il) enddo !do ixt=1,ntraciso #ifdef ISOVERIF do ixt=1,ntraciso call iso_verif_noNaN(fxtd(ixt,il,i),'cv3_yield 5661') enddo if (iso_eau.gt.0) then call iso_verif_egalite(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 5437') call iso_verif_egalite_choix(fxtd(iso_eau,il,i), & & fqd(il,i),'cv3_routines 5439',errmax*0.1,errmaxrel) endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 6744') endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_O18_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i))/(rr(il,i)+delt*fr(il,i)),(xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i))/(rr(il,i)+delt*fr(il,i)), & & 'cv3_yield 6744b') endif !if (iso_HDO.gt.0) then #endif #endif END IF END DO END DO ENDIF !jyg< !Conservation de l'eau !! sumdq = 0. !! DO k = 1, nl !! sumdq = sumdq + fr(1, k)*100.*(ph(1,k)-ph(1,k+1))/grav !! END DO !! PRINT *, 'cv3_yield, apres hom, sum(dq), precip, somme ', sumdq, Vprecip(1, 1), sumdq + vprecip(1, 1) !jyg> ! *** Check that moisture stays positive. If not, scale tendencies ! in order to ensure moisture positivity DO il = 1, ncum alpha_qpos(il) = 1. IF (iflag(il)<=1) THEN IF (fr(il,1)<=0.) THEN alpha_qpos(il) = max(alpha_qpos(il), (-delt*fr(il,1))/(s_wake(il)*rr_wake(il,1)+(1.-s_wake(il))*rr(il,1))) END IF END IF END DO DO i = 2, nl DO il = 1, ncum IF (iflag(il)<=1) THEN IF (fr(il,i)<=0.) THEN alpha_qpos1(il) = max(1., (-delt*fr(il,i))/(s_wake(il)*rr_wake(il,i)+(1.-s_wake(il))*rr(il,i))) IF (alpha_qpos1(il)>=alpha_qpos(il)) alpha_qpos(il) = alpha_qpos1(il) END IF END IF END DO END DO DO il = 1, ncum IF (iflag(il)<=1 .AND. alpha_qpos(il)>1.001) THEN alpha_qpos(il) = alpha_qpos(il)*1.1 END IF END DO ! IF (prt_level .GE. 5) THEN print *,' CV3_YIELD : alpha_qpos ',alpha_qpos(1) ENDIF ! DO il = 1, ncum IF (iflag(il)<=1) THEN sigd(il) = sigd(il)/alpha_qpos(il) precip(il) = precip(il)/alpha_qpos(il) cbmf(il) = cbmf(il)/alpha_qpos(il) END IF END DO DO i = 1, nl DO il = 1, ncum IF (iflag(il)<=1) THEN fr(il, i) = fr(il, i)/alpha_qpos(il) ft(il, i) = ft(il, i)/alpha_qpos(il) fqd(il, i) = fqd(il, i)/alpha_qpos(il) ftd(il, i) = ftd(il, i)/alpha_qpos(il) fu(il, i) = fu(il, i)/alpha_qpos(il) fv(il, i) = fv(il, i)/alpha_qpos(il) m(il, i) = m(il, i)/alpha_qpos(il) mp(il, i) = mp(il, i)/alpha_qpos(il) Vprecip(il, i) = Vprecip(il, i)/alpha_qpos(il) Vprecipi(il, i) = Vprecipi(il, i)/alpha_qpos(il) ! jyg #ifdef ISO do ixt=1,ntraciso fxt(ixt,il,i) = fxt(ixt,il,i)/alpha_qpos(il) fxtd(ixt,il,i) = fxtd(ixt,il,i)/alpha_qpos(il) xtVprecip(ixt,il,i) = xtVprecip(ixt,il,i)/alpha_qpos(il) xtVprecipi(ixt,il,i) = xtVprecipi(ixt,il,i)/alpha_qpos(il) enddo !do ixt=1,ntraciso #ifdef ISOVERIF do ixt=1,ntraciso call iso_verif_noNaN(fxt(ixt,il,i),'cv3_yield 5731a') call iso_verif_noNaN(fxtd(ixt,il,i),'cv3_yield 5731b') enddo if (iso_eau.gt.0) then call iso_verif_egalite(fxt(iso_eau,il,i), & & fr(il,i),'cv3_routines 5502') endif !if (iso_eau.gt.0) then if ((iso_HDO.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then call iso_verif_aberrant((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i)) & & /(rr(il,i)+delt*fr(il,i)),'cv3_yield 6835a') endif !if (iso_HDO.gt.0) then if ((iso_HDO.gt.0).and.(iso_O18.gt.0).and. & & (rr(il,i)+delt*fr(il,i).gt.ridicule)) then if (iso_verif_O18_aberrant_nostop((xt(iso_HDO,il,i) & & +delt*fxt(iso_HDO,il,i))/(rr(il,i)+delt*fr(il,i)),(xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i))/(rr(il,i)+delt*fr(il,i)), & & 'cv3_yield 6835b').eq.1) then write(*,*) 'il,i=',il,i write(*,*) 'deltaOavant=',deltaO(xt(iso_O18,il,i)/rr(il,i)) write(*,*) 'deltaOapres=',deltaO((xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i))/(rr(il,i)+delt*fr(il,i))) write(*,*) 'rr,fq*delt=',rr(il,i),delt*fr(il,i) write(*,*) 'alpha_qpos=',alpha_qpos(il) write(*,*) 'fq*delt avantqpos=',delt*fr(il,i)*alpha_qpos(il) write(*,*) 'deltaO avantqpos=',deltaO((xt(iso_O18,il,i) & & +delt*fxt(iso_O18,il,i)*alpha_qpos(il))/(rr(il,i)+delt*fr(il,i)*alpha_qpos(il))) write(*,*) 'deltaOfq=',deltaO(fxt(iso_O18,il,i)/fr(il,i)) write(*,*) 'xt,fxt*delt=',xt(iso_O18,il,i),delt*fxt(iso_O18,il,i) stop endif endif !if (iso_HDO.gt.0) then #endif #ifdef DIAGISO fq_ddft(il, i) = fq_ddft(il, i)/alpha_qpos(il) fq_evapprecip(il, i) = fq_evapprecip(il, i)/alpha_qpos(il) fq_fluxmasse(il, i) = fq_fluxmasse(il, i)/alpha_qpos(il) fq_detrainement(il, i) = fq_detrainement(il, i)/alpha_qpos(il) do ixt=1,ntraciso fxt_ddft(ixt,il, i) = fxt_ddft(ixt,il, i)/alpha_qpos(il) fxt_evapprecip(ixt,il, i) = fxt_evapprecip(ixt,il, i)/alpha_qpos(il) fxt_fluxmasse(ixt,il, i) = fxt_fluxmasse(ixt,il, i)/alpha_qpos(il) fxt_detrainement(ixt,il, i) = fxt_detrainement(ixt,il, i)/alpha_qpos(il) enddo ! do ixt=1,ntraciso #endif #endif END IF END DO END DO !jyg< !----------------------------------------------------------- IF (ok_optim_yield) THEN !| !----------------------------------------------------------- DO i = 1, nl DO il = 1, ncum IF (iflag(il)<=1) THEN upwd(il, i) = upwd(il, i)/alpha_qpos(il) dnwd(il, i) = dnwd(il, i)/alpha_qpos(il) END IF END DO END DO !----------------------------------------------------------- ENDIF !(ok_optim_yield) !| !----------------------------------------------------------- !>jyg DO j = 1, nl !yor! inverted i and j loops DO i = 1, nl DO il = 1, ncum IF (iflag(il)<=1) THEN ment(il, i, j) = ment(il, i, j)/alpha_qpos(il) END IF END DO END DO END DO !AC! DO j = 1,ntra !AC! DO i = 1,nl !AC! DO il = 1,ncum !AC! IF (iflag(il) .le. 1) THEN !AC! ftra(il,i,j) = ftra(il,i,j)/alpha_qpos(il) !AC! ENDIF !AC! ENDDO !AC! ENDDO !AC! ENDDO ! *** reset counter and return *** ! Reset counter only for points actually convective (jyg) ! In order take into account the possibility of changing the compression, ! reset m, sig and w0 to zero for non-convecting points. DO il = 1, ncum IF (iflag(il) < 3) THEN sig(il, nd) = 2.0 ENDIF END DO DO i = 1, nl DO il = 1, ncum dnwd0(il, i) = -mp(il, i) END DO END DO !jyg< (loops stop at nl) !! DO i = nl + 1, nd !! DO il = 1, ncum !! dnwd0(il, i) = 0. !! END DO !! END DO !>jyg !jyg< !----------------------------------------------------------- IF (.NOT.ok_optim_yield) THEN !| !----------------------------------------------------------- DO i = 1, nl DO il = 1, ncum upwd(il, i) = 0.0 dnwd(il, i) = 0.0 END DO END DO !! DO i = 1, nl ! useless; jyg !! DO il = 1, ncum ! useless; jyg !! IF (i>=icb(il) .AND. i<=inb(il)) THEN ! useless; jyg !! upwd(il, i) = 0.0 ! useless; jyg !! dnwd(il, i) = 0.0 ! useless; jyg !! END IF ! useless; jyg !! END DO ! useless; jyg !! END DO ! useless; jyg DO i = 1, nl DO k = 1, nl DO il = 1, ncum up1(il, k, i) = 0.0 dn1(il, k, i) = 0.0 END DO END DO END DO !yor! commented original ! DO i = 1, nl ! DO k = i, nl ! DO n = 1, i - 1 ! DO il = 1, ncum ! IF (i>=icb(il) .AND. i<=inb(il) .AND. k<=inb(il)) THEN ! up1(il, k, i) = up1(il, k, i) + ment(il, n, k) ! dn1(il, k, i) = dn1(il, k, i) - ment(il, k, n) ! END IF ! END DO ! END DO ! END DO ! END DO !yor! replaced with DO i = 1, nl DO k = i, nl DO n = 1, i - 1 DO il = 1, ncum IF (i>=icb(il) .AND. k<=inb(il)) THEN ! yor ! as i always <= k up1(il, k, i) = up1(il, k, i) + ment(il, n, k) END IF END DO END DO END DO END DO DO i = 1, nl DO n = 1, i - 1 DO k = i, nl DO il = 1, ncum IF (i>=icb(il) .AND. k<=inb(il)) THEN ! yor ! i always <= k dn1(il, k, i) = dn1(il, k, i) - ment(il, k, n) END IF END DO END DO END DO END DO !yor! end replace DO i = 1, nl DO k = 1, nl DO il = 1, ncum IF (i>=icb(il)) THEN IF (k>=i .AND. k<=(inb(il))) THEN upwd(il, i) = upwd(il, i) + m(il, k) END IF ELSE IF (kjyg !! DO i = 1, nl !! DO il = 1, ncum !! IF (i<=(icb(il)-1)) THEN !! ma(il, i) = 0 !! END IF !! END DO !! END DO !----------------------------------------------------------- ENDIF !(.NOT.ok_optim_yield) !| !----------------------------------------------------------- !>jyg ! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! determination de la variation de flux ascendant entre ! deux niveau non dilue mip ! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc DO i = 1, nl DO il = 1, ncum mip(il, i) = m(il, i) END DO END DO !jyg< (loops stop at nl) !! DO i = nl + 1, nd !! DO il = 1, ncum !! mip(il, i) = 0. !! END DO !! END DO !>jyg ! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ! icb represente de niveau ou se trouve la ! base du nuage , et inb le top du nuage ! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc !! DO i = 1, nd ! unused . jyg !! DO il = 1, ncum ! unused . jyg !! mke(il, i) = upwd(il, i) + dnwd(il, i) ! unused . jyg !! END DO ! unused . jyg !! END DO ! unused . jyg !! DO i = 1, nd ! unused . jyg !! DO il = 1, ncum ! unused . jyg !! rdcp = (rrd*(1.-rr(il,i))-rr(il,i)*rrv)/(cpd*(1.-rr(il,i))+rr(il,i)*cpv) ! unused . jyg !! tls(il, i) = t(il, i)*(1000.0/p(il,i))**rdcp ! unused . jyg !! tps(il, i) = tp(il, i) ! unused . jyg !! END DO ! unused . jyg !! END DO ! unused . jyg ! *** diagnose the in-cloud mixing ratio *** ! cld ! *** of condensed water *** ! cld !! cld DO i = 1, nl+1 ! cld DO il = 1, ncum ! cld mac(il, i) = 0.0 ! cld wa(il, i) = 0.0 ! cld siga(il, i) = 0.0 ! cld sax(il, i) = 0.0 ! cld END DO ! cld END DO ! cld DO i = minorig, nl ! cld DO k = i + 1, nl + 1 ! cld DO il = 1, ncum ! cld IF (i<=inb(il) .AND. k<=(inb(il)+1) .AND. iflag(il)<=1) THEN ! cld mac(il, i) = mac(il, i) + m(il, k) ! cld END IF ! cld END DO ! cld END DO ! cld END DO ! cld DO i = 1, nl ! cld DO j = 1, i ! cld DO il = 1, ncum ! cld IF (i>=icb(il) .AND. i<=(inb(il)-1) & ! cld .AND. j>=icb(il) .AND. iflag(il)<=1) THEN ! cld sax(il, i) = sax(il, i) + rrd*(tvp(il,j)-tv(il,j)) & ! cld *(ph(il,j)-ph(il,j+1))/p(il, j) ! cld END IF ! cld END DO ! cld END DO ! cld END DO ! cld DO i = 1, nl ! cld DO il = 1, ncum ! cld IF (i>=icb(il) .AND. i<=(inb(il)-1) & ! cld .AND. sax(il,i)>0.0 .AND. iflag(il)<=1) THEN ! cld wa(il, i) = sqrt(2.*sax(il,i)) ! cld END IF ! cld END DO ! cld END DO ! cld DO i = 1, nl ! 14/01/15 AJ je remets les parties manquantes cf JYG ! Initialize sument to 0 DO il = 1,ncum sument(il) = 0. ENDDO ! Sum mixed mass fluxes in sument DO k = 1,nl DO il = 1,ncum IF (k<=inb(il) .AND. i<=inb(il) .AND. iflag(il)<=1) THEN ! cld sument(il) =sument(il) + abs(ment(il,k,i)) ENDIF ENDDO ! il ENDDO ! k ! 14/01/15 AJ delta n'a rien a faire la... DO il = 1, ncum ! cld !! IF (wa(il,i)>0.0 .AND. iflag(il)<=1) & ! cld !! siga(il, i) = mac(il, i)/(coefw_cld_cv*wa(il, i)) & ! cld !! *rrd*tvp(il, i)/p(il, i)/100. ! cld !! !! siga(il, i) = min(siga(il,i), 1.0) ! cld sigaq = 0. IF (wa(il,i)>0.0 .AND. iflag(il)<=1) THEN ! cld siga(il, i) = mac(il, i)/(coefw_cld_cv*wa(il, i)) & ! cld *rrd*tvp(il, i)/p(il, i)/100. ! cld siga(il, i) = min(siga(il,i), 1.0) ! cld sigaq = siga(il,i)*qta(il,i-1) ! cld ENDIF ! IM cf. FH ! 14/01/15 AJ ne correspond pas a ce qui a ete code par JYG et SB IF (iflag_clw==0) THEN ! cld qcondc(il, i) = siga(il, i)*clw(il, i)*(1.-ep(il,i)) & ! cld +(1.-siga(il,i))*qcond(il, i) ! cld sigment(il,i)=sument(il)*tau_cld_cv/(ph(il,i)-ph(il,i+1)) ! cld sigment(il, i) = min(1.e-4+sigment(il,i), 1.0 - siga(il,i)) ! cld !! qtc(il, i) = (siga(il,i)*qta(il,i-1)+sigment(il,i)*qtment(il,i)) & ! cld qtc(il, i) = (sigaq+sigment(il,i)*qtment(il,i)) & ! cld /(siga(il,i)+sigment(il,i)) ! cld sigt(il,i) = sigment(il, i) + siga(il, i) ! qtc(il, i) = siga(il,i)*qta(il,i-1)+(1.-siga(il,i))*qtment(il,i) ! cld ! print*,'BIGAUSSIAN CONV',siga(il,i),sigment(il,i),qtc(il,i) ELSE IF (iflag_clw==1) THEN ! cld qcondc(il, i) = qcond(il, i) ! cld qtc(il,i) = qtment(il,i) ! cld END IF ! cld END DO ! cld END DO #ifdef ISO #ifdef DIAGISO do i=1,nl do il=1,ncum if (f_detrainement(il,i).gt.0.0) then q_detrainement(il,i)=q_detrainement(il,i) & /f_detrainement(il,i) do ixt=1,niso xt_detrainement(ixt,il,i)=xt_detrainement(ixt,il,i) & /f_detrainement(il,i) enddo !do ixt=1,niso else !if (f_detrainement(il,1).gt.0.0) then q_detrainement(il,i)=0.0 do ixt=1,niso xt_detrainement(ixt,il,i)=0.0 enddo !do ixt=1,niso endif !if (f_detrainement(il,1).gt.0.0) then enddo !do il=1,ncum enddo !do i=1,nl #endif #endif ! print*,'cv3_yield fin' RETURN END SUBROUTINE cv3_yield !AC! et !RomP >>> SUBROUTINE cv3_tracer(nloc, len, ncum, nd, na, & ment, sigij, da, phi, phi2, d1a, dam, & ep, Vprecip, elij, clw, epmlmMm, eplaMm, & icb, inb) IMPLICIT NONE include "cv3param.h" !inputs: INTEGER, INTENT (IN) :: ncum, nd, na, nloc, len INTEGER, DIMENSION (len), INTENT (IN) :: icb, inb REAL, DIMENSION (len, na, na), INTENT (IN) :: ment, sigij, elij REAL, DIMENSION (len, nd), INTENT (IN) :: clw REAL, DIMENSION (len, na), INTENT (IN) :: ep REAL, DIMENSION (len, nd+1), INTENT (IN) :: Vprecip !ouputs: REAL, DIMENSION (len, na, na), INTENT (OUT) :: phi, phi2, epmlmMm REAL, DIMENSION (len, na), INTENT (OUT) :: da, d1a, dam, eplaMm ! ! variables pour tracer dans precip de l'AA et des mel !local variables: INTEGER i, j, k REAL epm(nloc, na, na) ! variables d'Emanuel : du second indice au troisieme ! ---> tab(i,k,j) -> de l origine k a l arrivee j ! ment, sigij, elij ! variables personnelles : du troisieme au second indice ! ---> tab(i,j,k) -> de k a j ! phi, phi2 ! initialisations da(:, :) = 0. d1a(:, :) = 0. dam(:, :) = 0. epm(:, :, :) = 0. eplaMm(:, :) = 0. epmlmMm(:, :, :) = 0. phi(:, :, :) = 0. phi2(:, :, :) = 0. ! fraction deau condensee dans les melanges convertie en precip : epm ! et eau condensee precipitee dans masse d'air sature : l_m*dM_m/dzdz.dzdz DO j = 1, nl DO k = 1, nl DO i = 1, ncum IF (k>=icb(i) .AND. k<=inb(i) .AND. & !!jyg j.ge.k.and.j.le.inb(i)) then !!jyg epm(i,j,k)=1.-(1.-ep(i,j))*clw(i,j)/elij(i,k,j) j>k .AND. j<=inb(i)) THEN epm(i, j, k) = 1. - (1.-ep(i,j))*clw(i, j)/max(elij(i,k,j), 1.E-16) !! epm(i, j, k) = max(epm(i,j,k), 0.0) END IF END DO END DO END DO DO j = 1, nl DO k = 1, nl DO i = 1, ncum IF (k>=icb(i) .AND. k<=inb(i)) THEN eplaMm(i, j) = eplamm(i, j) + & ep(i, j)*clw(i, j)*ment(i, j, k)*(1.-sigij(i,j,k)) END IF END DO END DO END DO DO j = 1, nl DO k = 1, j - 1 DO i = 1, ncum IF (k>=icb(i) .AND. k<=inb(i) .AND. j<=inb(i)) THEN epmlmMm(i, j, k) = epm(i, j, k)*elij(i, k, j)*ment(i, k, j) END IF END DO END DO END DO ! matrices pour calculer la tendance des concentrations dans cvltr.F90 DO j = 1, nl DO k = 1, nl DO i = 1, ncum da(i, j) = da(i, j) + (1.-sigij(i,k,j))*ment(i, k, j) phi(i, j, k) = sigij(i, k, j)*ment(i, k, j) d1a(i, j) = d1a(i, j) + ment(i, k, j)*ep(i, k)*(1.-sigij(i,k,j)) IF (k<=j) THEN dam(i, j) = dam(i, j) + ment(i, k, j)*epm(i, k, j)*(1.-ep(i,k))*(1.-sigij(i,k,j)) phi2(i, j, k) = phi(i, j, k)*epm(i, j, k) END IF END DO END DO END DO RETURN END SUBROUTINE cv3_tracer !AC! et !RomP <<< SUBROUTINE cv3_uncompress(nloc, len, ncum, nd, ntra, idcum, & iflag, & precip, sig, w0, & ft, fq, fu, fv, ftra, & Ma, upwd, dnwd, dnwd0, qcondc, wd, cape, & epmax_diag, & ! epmax_cape iflag1, & precip1, sig1, w01, & ft1, fq1, fu1, fv1, ftra1, & Ma1, upwd1, dnwd1, dnwd01, qcondc1, wd1, cape1, & epmax_diag1 & ! epmax_cape #ifdef ISO & ,xtprecip,fxt,xtVPrecip & & ,xtprecip1,fxt1,xtVPrecip1 & #ifdef DIAGISO & , water,xtwater,qp,xtp,evap,xtevap & & , clw,xtclw & & , wdtrainA,xtwdtrainA & & , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip & & , fxt_detrainement,fxt_ddft,fxt_fluxmasse, fxt_evapprecip & & , f_detrainement,q_detrainement,xt_detrainement & & , water1,xtwater1,qp1,xtp1,evap1,xtevap1 & & , clw1,xtclw1 & & , wdtrainA1,xtwdtrainA1 & & , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 & & , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1, fxt_evapprecip1 & & , f_detrainement1,q_detrainement1,xt_detrainement1 & #endif #endif & ) #ifdef ISO use infotrac_phy, ONLY: ntraciso=>ntiso #ifdef ISOVERIF use isotopes_verif_mod, ONLY: Tmin_verif,iso_verif_aberrant, & iso_verif_egalite,iso_verif_egalite_choix_nostop,iso_verif_positif_nostop, & iso_verif_egalite_nostop,iso_verif_aberrant_nostop,deltaD,iso_verif_noNaN_nostop, & iso_verif_positif,iso_verif_egalite_vect2D #endif #endif IMPLICIT NONE include "cv3param.h" !inputs: INTEGER len, ncum, nd, ntra, nloc INTEGER idcum(nloc) INTEGER iflag(nloc) REAL precip(nloc) REAL sig(nloc, nd), w0(nloc, nd) REAL ft(nloc, nd), fq(nloc, nd), fu(nloc, nd), fv(nloc, nd) REAL ftra(nloc, nd, ntra) REAL ma(nloc, nd) REAL upwd(nloc, nd), dnwd(nloc, nd), dnwd0(nloc, nd) REAL qcondc(nloc, nd) REAL wd(nloc), cape(nloc) REAL epmax_diag(nloc) #ifdef ISO !integer niso real xtprecip(ntraciso,nloc) real fxt(ntraciso,nloc,nd) real xtVPrecip(ntraciso,nloc,nd+1) #endif !outputs: INTEGER iflag1(len) REAL precip1(len) REAL sig1(len, nd), w01(len, nd) REAL ft1(len, nd), fq1(len, nd), fu1(len, nd), fv1(len, nd) REAL ftra1(len, nd, ntra) REAL ma1(len, nd) REAL upwd1(len, nd), dnwd1(len, nd), dnwd01(len, nd) REAL qcondc1(nloc, nd) REAL wd1(nloc), cape1(nloc) REAL epmax_diag1(len) ! epmax_cape #ifdef ISO real xtprecip1(ntraciso,len) real fxt1(ntraciso,len,nd) real xtVPrecip1(ntraciso,len,nd+1) #endif !local variables: INTEGER i, k, j #ifdef ISO integer ixt #endif #ifdef DIAGISO real water(nloc,nd) real xtwater(ntraciso,nloc,nd) real qp(nloc,nd),xtp(ntraciso,nloc,nd) real evap(nloc,nd),xtevap(ntraciso,nloc,nd) real wdtrainA(nloc,nd) real xtwdtrainA(ntraciso,nloc,nd) real clw(nloc,nd) real xtclw(ntraciso,nloc,nd) real fq_detrainement(nloc,nd) real f_detrainement(nloc,nd) real q_detrainement(nloc,nd) real fq_ddft(nloc,nd) real fq_fluxmasse(nloc,nd) real fq_evapprecip(nloc,nd) real fxt_detrainement(ntraciso,nloc,nd) real xt_detrainement(ntraciso,nloc,nd) real fxt_ddft(ntraciso,nloc,nd) real fxt_fluxmasse(ntraciso,nloc,nd) real fxt_evapprecip(ntraciso,nloc,nd) real water1(len,nd) real xtwater1(ntraciso,len,nd) real qp1(len,nd),xtp1(ntraciso,len,nd) real evap1(nloc,nd) real xtevap1(ntraciso,nloc,nd) real wdtrainA1(len,nd) real xtwdtrainA1(ntraciso,len,nd) real clw1(len,nd) real xtclw1(ntraciso,len,nd) real fq_detrainement1(len,nd) real f_detrainement1(len,nd) real q_detrainement1(len,nd) real fq_ddft1(len,nd) real fq_fluxmasse1(len,nd) real fq_evapprecip1(len,nd) real fxt_detrainement1(ntraciso,len,nd) real xt_detrainement1(ntraciso,len,nd) real fxt_ddft1(ntraciso,len,nd) real fxt_fluxmasse1(ntraciso,len,nd) real fxt_evapprecip1(ntraciso,len,nd) #endif DO i = 1, ncum precip1(idcum(i)) = precip(i) iflag1(idcum(i)) = iflag(i) wd1(idcum(i)) = wd(i) cape1(idcum(i)) = cape(i) epmax_diag1(idcum(i))=epmax_diag(i) ! epmax_cape #ifdef ISO do ixt = 1, ntraciso xtprecip1(ixt,idcum(i))=xtprecip(ixt,i) enddo #endif END DO DO k = 1, nl DO i = 1, ncum sig1(idcum(i), k) = sig(i, k) w01(idcum(i), k) = w0(i, k) ft1(idcum(i), k) = ft(i, k) fq1(idcum(i), k) = fq(i, k) fu1(idcum(i), k) = fu(i, k) fv1(idcum(i), k) = fv(i, k) ma1(idcum(i), k) = ma(i, k) upwd1(idcum(i), k) = upwd(i, k) dnwd1(idcum(i), k) = dnwd(i, k) dnwd01(idcum(i), k) = dnwd0(i, k) qcondc1(idcum(i), k) = qcondc(i, k) #ifdef ISO do ixt = 1, ntraciso fxt1(ixt,idcum(i),k)=fxt(ixt,i,k) xtVPrecip1(ixt,idcum(i),k)=xtVPrecip(ixt,i,k) enddo #endif END DO END DO DO i = 1, ncum sig1(idcum(i), nd) = sig(i, nd) END DO #ifdef ISO #ifdef DIAGISO do k=1,nl do i=1,ncum water1(idcum(i),k)=water(i,k) qp1(idcum(i),k)=qp(i,k) evap1(idcum(i),k)=evap(i,k) wdtrainA1(idcum(i),k)=wdtrainA(i,k) clw1(idcum(i),k)=clw(i,k) fq_detrainement1(idcum(i),k)=fq_detrainement(i,k) f_detrainement1(idcum(i),k)=f_detrainement(i,k) q_detrainement1(idcum(i),k)=q_detrainement(i,k) fq_ddft1(idcum(i),k)=fq_ddft(i,k) fq_fluxmasse1(idcum(i),k)=fq_fluxmasse(i,k) #ifdef ISOVERIF call iso_verif_positif(abs(fq_ddft(i,k))*86400-0.1, & & 'cv30_routines 5764') call iso_verif_positif(abs(fq_detrainement(i,k))*86400-0.1, & & 'cv30_routines 5765') #endif fq_evapprecip1(idcum(i),k)=fq_evapprecip(i,k) do ixt = 1, ntraciso xtwater1(ixt,idcum(i),k)=xtwater(ixt,i,k) xtp1(ixt,idcum(i),k)=xtp(ixt,i,k) xtevap1(ixt,idcum(i),k)=xtevap(ixt,i,k) xtwdtrainA1(ixt,idcum(i),k)=xtwdtrainA(ixt,i,k) xtclw1(ixt,idcum(i),k)=xtclw(ixt,i,k) fxt_detrainement1(ixt,idcum(i),k)=fxt_detrainement(ixt,i,k) xt_detrainement1(ixt,idcum(i),k)=xt_detrainement(ixt,i,k) fxt_ddft1(ixt,idcum(i),k)=fxt_ddft(ixt,i,k) fxt_fluxmasse1(ixt,idcum(i),k)=fxt_fluxmasse(ixt,i,k) fxt_evapprecip1(ixt,idcum(i),k)=fxt_evapprecip(ixt,i,k) ! xtentbas1(ixt,idcum(i),k)=xtent(ixt,i,k,1) enddo enddo enddo #endif #endif !AC! do 2100 j=1,ntra !AC!c oct3 do 2110 k=1,nl !AC! do 2110 k=1,nd ! oct3 !AC! do 2120 i=1,ncum !AC! ftra1(idcum(i),k,j)=ftra(i,k,j) !AC! 2120 continue !AC! 2110 continue !AC! 2100 continue ! RETURN END SUBROUTINE cv3_uncompress subroutine cv3_epmax_fn_cape(nloc,ncum,nd & , ep,hp,icb,inb,clw,nk,t,h,hnk,lv,lf,frac & , pbase, p, ph, tv, buoy, sig, w0,iflag & , epmax_diag) implicit none ! On fait varier epmax en fn de la cape ! Il faut donc recalculer ep, et hp qui a deja ete calcule et ! qui en depend ! Toutes les autres variables fn de ep sont calculees plus bas. include "cvthermo.h" include "cv3param.h" include "conema3.h" include "cvflag.h" ! inputs: INTEGER, INTENT (IN) :: ncum, nd, nloc INTEGER, DIMENSION (nloc), INTENT (IN) :: icb, inb, nk REAL, DIMENSION (nloc), INTENT (IN) :: hnk,pbase REAL, DIMENSION (nloc, nd), INTENT (IN) :: t, lv, lf, tv, h REAL, DIMENSION (nloc, nd), INTENT (IN) :: clw, buoy,frac REAL, DIMENSION (nloc, nd), INTENT (IN) :: sig,w0 INTEGER, DIMENSION (nloc), INTENT (IN) :: iflag(nloc) REAL, DIMENSION (nloc, nd), INTENT (IN) :: p REAL, DIMENSION (nloc, nd+1), INTENT (IN) :: ph ! inouts: REAL, DIMENSION (nloc, nd), INTENT (INOUT) :: ep,hp ! outputs REAL, DIMENSION (nloc), INTENT (OUT) :: epmax_diag ! local integer i,k ! real hp_bak(nloc,nd) ! real ep_bak(nloc,nd) real m_loc(nloc,nd) real sig_loc(nloc,nd) real w0_loc(nloc,nd) integer iflag_loc(nloc) real cape(nloc) if (coef_epmax_cape.gt.1e-12) then ! il faut calculer la cape: on fait un calcule simple car tant qu'on ne ! connait pas ep, on ne connait pas les melanges, ddfts etc... qui sont ! necessaires au calcul de la cape dans la nouvelle physique ! write(*,*) 'cv3_routines check 4303' do i=1,ncum do k=1,nd sig_loc(i,k)=sig(i,k) w0_loc(i,k)=w0(i,k) iflag_loc(i)=iflag(i) ! ep_bak(i,k)=ep(i,k) enddo ! do k=1,nd enddo !do i=1,ncum ! write(*,*) 'cv3_routines check 4311' ! write(*,*) 'nl=',nl CALL cv3_closure(nloc, ncum, nd, icb, inb, & ! na->nd pbase, p, ph, tv, buoy, & sig_loc, w0_loc, cape, m_loc,iflag_loc) ! write(*,*) 'cv3_routines check 4316' ! write(*,*) 'ep(1,:)=',ep(1,:) do i=1,ncum epmax_diag(i)=epmax-coef_epmax_cape*sqrt(cape(i)) epmax_diag(i)=amax1(epmax_diag(i),0.0) ! write(*,*) 'i,icb,inb,cape,epmax_diag=', & ! i,icb(i),inb(i),cape(i),epmax_diag(i) do k=1,nl ep(i,k)=ep(i,k)/epmax*epmax_diag(i) ep(i,k)=amax1(ep(i,k),0.0) ep(i,k)=amin1(ep(i,k),epmax_diag(i)) enddo enddo ! write(*,*) 'ep(1,:)=',ep(1,:) !write(*,*) 'cv3_routines check 4326' ! On recalcule hp: ! do k=1,nl ! do i=1,ncum ! hp_bak(i,k)=hp(i,k) ! enddo ! enddo do k=1,nl do i=1,ncum hp(i,k)=h(i,k) enddo enddo IF (cvflag_ice) THEN do k=minorig+1,nl do i=1,ncum if((k.ge.icb(i)).and.(k.le.inb(i)))then hp(i, k) = hnk(i) + (lv(i,k)+(cpd-cpv)*t(i,k)+frac(i,k)*lf(i,k))* & ep(i, k)*clw(i, k) endif enddo enddo !do k=minorig+1,n ELSE !IF (cvflag_ice) THEN DO k = minorig + 1, nl DO i = 1, ncum IF ((k>=icb(i)) .AND. (k<=inb(i))) THEN hp(i,k)=hnk(i)+(lv(i,k)+(cpd-cpv)*t(i,k))*ep(i,k)*clw(i,k) endif enddo enddo !do k=minorig+1,n ENDIF !IF (cvflag_ice) THEN !write(*,*) 'cv3_routines check 4345' ! do i=1,ncum ! do k=1,nl ! if ((abs(hp_bak(i,k)-hp(i,k))/hp_bak(i,k).gt.1e-1).or. & ! ((abs(hp_bak(i,k)-hp(i,k))/hp_bak(i,k).gt.1e-4).and. & ! (ep(i,k)-ep_bak(i,k).lt.1e-4))) then ! write(*,*) 'i,k=',i,k ! write(*,*) 'coef_epmax_cape=',coef_epmax_cape ! write(*,*) 'epmax_diag(i)=',epmax_diag(i) ! write(*,*) 'ep(i,k)=',ep(i,k) ! write(*,*) 'ep_bak(i,k)=',ep_bak(i,k) ! write(*,*) 'hp(i,k)=',hp(i,k) ! write(*,*) 'hp_bak(i,k)=',hp_bak(i,k) ! write(*,*) 'h(i,k)=',h(i,k) ! write(*,*) 'nk(i)=',nk(i) ! write(*,*) 'h(i,nk(i))=',h(i,nk(i)) ! write(*,*) 'lv(i,k)=',lv(i,k) ! write(*,*) 't(i,k)=',t(i,k) ! write(*,*) 'clw(i,k)=',clw(i,k) ! write(*,*) 'cpd,cpv=',cpd,cpv ! stop ! endif ! enddo !do k=1,nl ! enddo !do i=1,ncum endif !if (coef_epmax_cape.gt.1e-12) then !write(*,*) 'cv3_routines check 4367' return end subroutine cv3_epmax_fn_cape