! $Id: phys_output_mod.F90 1791 2013-07-17 10:20:19Z evignon $ ! ! Abderrahmane 12 2007 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Ecreture des Sorties du modele dans les fichiers Netcdf : ! histmth.nc : moyennes mensuelles ! histday.nc : moyennes journalieres ! histhf.nc : moyennes toutes les 3 heures ! histins.nc : valeurs instantanees !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! MODULE phys_output_mod USE indice_sol_mod USE phys_output_var_mod USE phys_output_ctrlout_mod USE aero_mod, only : naero_spc,name_aero IMPLICIT NONE PRIVATE histdef2d, histdef3d, conf_physoutputs REAL, PRIVATE, SAVE :: zdtime !$OMP THREADPRIVATE(zdtime) CONTAINS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!! !! histbeg, histvert et histdef !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, & jjmp1,nlevSTD,clevSTD,nbteta, & ctetaSTD, dtime, ok_veget, & type_ocean, iflag_pbl,ok_mensuel,ok_journe, & ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, & phys_out_filestations, & new_aod, aerosol_couple, flag_aerosol_strat) USE iophy USE dimphy USE infotrac USE ioipsl USE phys_cal_mod, only : hour USE mod_phys_lmdz_para USE aero_mod, only : naero_spc,name_aero IMPLICIT NONE include "dimensions.h" include "temps.h" include "clesphys.h" include "thermcell.h" include "comvert.h" include "iniprint.h" real,dimension(klon),intent(in) :: rlon real,dimension(klon),intent(in) :: rlat INTEGER, intent(in) :: pim INTEGER, DIMENSION(pim) :: tabij INTEGER,dimension(pim), intent(in) :: ipt, jpt REAL,dimension(pim), intent(in) :: plat, plon REAL,dimension(pim,2) :: plat_bounds, plon_bounds INTEGER :: jjmp1 INTEGER :: nbteta, nlevSTD, radpas LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan LOGICAL :: ok_LES,ok_ade,ok_aie,flag_aerosol_strat LOGICAL :: new_aod, aerosol_couple INTEGER, intent(in):: read_climoz ! read ozone climatology ! Allowed values are 0, 1 and 2 ! 0: do not read an ozone climatology ! 1: read a single ozone climatology that will be used day and night ! 2: read two ozone climatologies, the average day and night ! climatology and the daylight climatology REAL :: dtime INTEGER :: idayref REAL :: zjulian REAL, DIMENSION(klev) :: Ahyb, Bhyb, Alt CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD INTEGER :: nsrf, k, iq, iiq, iff, i, j, ilev INTEGER :: naero LOGICAL :: ok_veget INTEGER :: iflag_pbl CHARACTER(LEN=4) :: bb2 CHARACTER(LEN=2) :: bb3 CHARACTER(LEN=6) :: type_ocean CHARACTER(LEN=3) :: ctetaSTD(nbteta) REAL, DIMENSION(nfiles) :: ecrit_files CHARACTER(LEN=20), DIMENSION(nfiles) :: phys_out_filenames INTEGER, DIMENSION(iim*jjmp1) :: ndex2d INTEGER, DIMENSION(iim*jjmp1*klev) :: ndex3d INTEGER :: imin_ins, imax_ins INTEGER :: jmin_ins, jmax_ins INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax INTEGER, DIMENSION(nfiles) :: phys_out_filelevels CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'DefFreq', 'DefFreq','DefFreq', 'DefFreq', 'DefFreq', 'DefFreq' /) LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys LOGICAL, DIMENSION(nfiles) :: phys_out_filestations !!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax] LOGICAL, DIMENSION(nfiles), SAVE :: phys_out_regfkey = (/ .FALSE., .FALSE., .FALSE., .FALSE., .FALSE., .FALSE. /) REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmin = (/ -180., -180., -180., -180., -180., -180. /) REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmax = (/ 180., 180., 180., 180., 180., 180. /) REAL, DIMENSION(nfiles), SAVE :: phys_out_latmin = (/ -90., -90., -90., -90., -90., -90. /) REAL, DIMENSION(nfiles), SAVE :: phys_out_latmax = (/ 90., 90., 90., 90., 90., 90. /) WRITE(lunout,*) 'Debut phys_output_mod.F90' ! Initialisations (Valeurs par defaut IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot)) IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot)) levmax = (/ klev, klev, klev, klev, klev, klev /) phys_out_filenames(1) = 'histmth' phys_out_filenames(2) = 'histday' phys_out_filenames(3) = 'histhf' phys_out_filenames(4) = 'histins' phys_out_filenames(5) = 'histLES' phys_out_filenames(6) = 'histstn' type_ecri(1) = 'ave(X)' type_ecri(2) = 'ave(X)' type_ecri(3) = 'ave(X)' type_ecri(4) = 'inst(X)' type_ecri(5) = 'ave(X)' type_ecri(6) = 'inst(X)' clef_files(1) = ok_mensuel clef_files(2) = ok_journe clef_files(3) = ok_hf clef_files(4) = ok_instan clef_files(5) = ok_LES clef_files(6) = ok_instan !sortir des fichiers "stations" si clef_stations(:)=.TRUE. clef_stations(1) = .FALSE. clef_stations(2) = .FALSE. clef_stations(3) = .FALSE. clef_stations(4) = .FALSE. clef_stations(5) = .FALSE. clef_stations(6) = .FALSE. lev_files(1) = lev_histmth lev_files(2) = lev_histday lev_files(3) = lev_histhf lev_files(4) = lev_histins lev_files(5) = lev_histLES lev_files(6) = lev_histins ecrit_files(1) = ecrit_mth ecrit_files(2) = ecrit_day ecrit_files(3) = ecrit_hf ecrit_files(4) = ecrit_ins ecrit_files(5) = ecrit_LES ecrit_files(6) = ecrit_ins !! Lectures des parametres de sorties dans physiq.def CALL getin('phys_out_regfkey',phys_out_regfkey) CALL getin('phys_out_lonmin',phys_out_lonmin) CALL getin('phys_out_lonmax',phys_out_lonmax) CALL getin('phys_out_latmin',phys_out_latmin) CALL getin('phys_out_latmax',phys_out_latmax) phys_out_levmin(:)=levmin(:) CALL getin('phys_out_levmin',levmin) phys_out_levmax(:)=levmax(:) CALL getin('phys_out_levmax',levmax) CALL getin('phys_out_filenames',phys_out_filenames) phys_out_filekeys(:)=clef_files(:) CALL getin('phys_out_filekeys',clef_files) phys_out_filestations(:)=clef_stations(:) CALL getin('phys_out_filestations',clef_stations) phys_out_filelevels(:)=lev_files(:) CALL getin('phys_out_filelevels',lev_files) CALL getin('phys_out_filetimesteps',chtimestep) phys_out_filetypes(:)=type_ecri(:) CALL getin('phys_out_filetypes',type_ecri) type_ecri_files(:)=type_ecri(:) WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames WRITE(lunout,*)'phys_out_filetypes=',type_ecri WRITE(lunout,*)'phys_out_filekeys=',clef_files WRITE(lunout,*)'phys_out_filestations=',clef_stations WRITE(lunout,*)'phys_out_filelevels=',lev_files !!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !! ! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie .. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! zdtime = dtime ! Frequence ou l on moyenne ! Calcul des Ahyb, Bhyb et Alt DO k=1,klev Ahyb(k)=(ap(k)+ap(k+1))/2. Bhyb(k)=(bp(k)+bp(k+1))/2. Alt(k)=log(preff/presnivs(k))*8. ENDDO ! if(prt_level.ge.1) then WRITE(lunout,*)'Ap Hybrid = ',Ahyb(1:klev) WRITE(lunout,*)'Bp Hybrid = ',Bhyb(1:klev) WRITE(lunout,*)'Alt approx des couches pour une haut d echelle de 8km = ',Alt(1:klev) ! endif DO iff=1,nfiles ! Calculate ecrit_files for all files IF ( chtimestep(iff).eq.'DefFreq' ) then ! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf ...)*86400. ecrit_files(iff)=ecrit_files(iff)*86400. ELSE CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff)) ENDIF WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff) zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde IF (clef_files(iff)) THEN idayref = day_ref ! CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian) ! correction pour l heure initiale !jyg ! !jyg CALL ymds2ju(annee_ref, 1, idayref, hour, zjulian) !jyg ! correction pour l heure initiale !jyg ! !jyg !!! CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian) !jyg ! correction pour l heure initiale !jyg ! !jyg ! CALL ymds2ju(annee_ref, 1, idayref, hour, zjulian) !jyg !!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IF (phys_out_regfkey(iff)) then imin_ins=1 imax_ins=iim jmin_ins=1 jmax_ins=jjmp1 ! correction abderr do i=1,iim WRITE(lunout,*)'io_lon(i)=',io_lon(i) IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1 enddo do j=1,jjmp1 WRITE(lunout,*)'io_lat(j)=',io_lat(j) IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1 IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j enddo WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', & imin_ins,imax_ins,jmin_ins,jmax_ins WRITE(lunout,*)'longitudes : ', & io_lon(imin_ins),io_lon(imax_ins), & 'latitudes : ', & io_lat(jmax_ins),io_lat(jmin_ins) CALL histbeg(phys_out_filenames(iff),iim,io_lon,jjmp1,io_lat, & imin_ins,imax_ins-imin_ins+1, & jmin_ins,jmax_ins-jmin_ins+1, & itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff)) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !IM fichiers stations else IF (clef_stations(iff)) THEN WRITE(lunout,*)'phys_output_mod phys_out_filenames=',phys_out_filenames(iff) CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, & phys_out_filenames(iff), & itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff)) else CALL histbeg_phy(phys_out_filenames(iff),itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff)) endif CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", & levmax(iff) - levmin(iff) + 1, & presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down") !!!!!!!!!!!!! Traitement des champs 3D pour histhf !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!! A Revoir plus tard !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! IF (iff.eq.3.and.lev_files(iff).ge.4) THEN ! CALL histbeg_phy("histhf3d",itau_phy, & ! & zjulian, dtime, & ! & nhorim, nid_hf3d) ! CALL histvert(nid_hf3d, "presnivs", & ! & "Vertical levels", "mb", & ! & klev, presnivs/100., nvertm) ! ENDIF ! !!!! Composentes de la coordonnee sigma-hybride CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", & levmax(iff) - levmin(iff) + 1,Ahyb,nvertap(iff)) CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", & levmax(iff) - levmin(iff) + 1,Bhyb,nvertbp(iff)) CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", & levmax(iff) - levmin(iff) + 1,Alt,nvertAlt(iff)) ! CALL histvert(nid_files(iff), "preff","Reference pressure", "Pa", & ! 1,preff,nvertp0(iff)) !!! Champs 1D !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CALL histdef2d(iff,o_aire) CALL histdef2d(iff,o_contfracATM) !!! Champs 2D !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CALL histdef2d(iff,o_phis) CALL histdef2d(iff,o_contfracOR) CALL histdef2d(iff,o_aireTER) CALL histdef2d(iff,o_flat) CALL histdef2d(iff,o_slp) CALL histdef2d(iff,o_tsol) CALL histdef2d(iff,o_t2m) CALL histdef2d(iff,o_t2m_min) CALL histdef2d(iff,o_t2m_max) CALL histdef2d(iff,o_wind10m) CALL histdef2d(iff,o_wind10max) CALL histdef2d(iff,o_sicf) CALL histdef2d(iff,o_q2m) CALL histdef2d(iff,o_ustar) CALL histdef2d(iff,o_u10m) CALL histdef2d(iff,o_v10m) CALL histdef2d(iff,o_psol) CALL histdef2d(iff,o_qsurf) IF (.NOT. ok_veget) THEN CALL histdef2d(iff,o_qsol) ENDIF CALL histdef2d(iff,o_ndayrain) CALL histdef2d(iff,o_precip) CALL histdef2d(iff,o_plul) CALL histdef2d(iff,o_pluc) CALL histdef2d(iff,o_snow) CALL histdef2d(iff,o_msnow) CALL histdef2d(iff,o_fsnow) CALL histdef2d(iff,o_evap) CALL histdef2d(iff,o_tops) CALL histdef2d(iff,o_tops0) CALL histdef2d(iff,o_topl) CALL histdef2d(iff,o_topl0) CALL histdef2d(iff,o_SWupTOA) CALL histdef2d(iff,o_SWupTOAclr) CALL histdef2d(iff,o_SWdnTOA) CALL histdef2d(iff,o_SWdnTOAclr) CALL histdef2d(iff,o_nettop) CALL histdef2d(iff,o_SWup200) CALL histdef2d(iff,o_SWup200clr) CALL histdef2d(iff,o_SWdn200) CALL histdef2d(iff,o_SWdn200clr) CALL histdef2d(iff,o_LWup200) CALL histdef2d(iff,o_LWup200clr) CALL histdef2d(iff,o_LWdn200) CALL histdef2d(iff,o_LWdn200clr) CALL histdef2d(iff,o_sols) CALL histdef2d(iff,o_sols0) CALL histdef2d(iff,o_soll) CALL histdef2d(iff,o_radsol) CALL histdef2d(iff,o_soll0) CALL histdef2d(iff,o_SWupSFC) CALL histdef2d(iff,o_SWupSFCclr) CALL histdef2d(iff,o_SWdnSFC) CALL histdef2d(iff,o_SWdnSFCclr) CALL histdef2d(iff,o_LWupSFC) CALL histdef2d(iff,o_LWdnSFC) CALL histdef2d(iff,o_LWupSFCclr) CALL histdef2d(iff,o_LWdnSFCclr) CALL histdef2d(iff,o_bils) CALL histdef2d(iff,o_bils_ec) CALL histdef2d(iff,o_bils_tke) CALL histdef2d(iff,o_bils_diss) CALL histdef2d(iff,o_bils_kinetic) CALL histdef2d(iff,o_bils_enthalp) CALL histdef2d(iff,o_bils_latent) CALL histdef2d(iff,o_sens) CALL histdef2d(iff,o_fder) CALL histdef2d(iff,o_ffonte) CALL histdef2d(iff,o_fqcalving) CALL histdef2d(iff,o_fqfonte) CALL histdef2d(iff,o_taux) CALL histdef2d(iff,o_tauy) DO nsrf = 1, nbsrf CALL histdef2d(iff,o_pourc_srf(nsrf)) CALL histdef2d(iff,o_fract_srf(nsrf)) CALL histdef2d(iff, o_taux_srf(nsrf)) CALL histdef2d(iff, o_tauy_srf(nsrf)) CALL histdef2d(iff, o_tsol_srf(nsrf)) CALL histdef2d(iff, o_evappot_srf(nsrf)) CALL histdef2d(iff, o_ustar_srf(nsrf)) CALL histdef2d(iff, o_u10m_srf(nsrf)) CALL histdef2d(iff, o_evap_srf(nsrf)) CALL histdef2d(iff, o_v10m_srf(nsrf)) CALL histdef2d(iff, o_t2m_srf(nsrf)) CALL histdef2d(iff, o_sens_srf(nsrf)) CALL histdef2d(iff, o_lat_srf(nsrf)) CALL histdef2d(iff, o_flw_srf(nsrf)) CALL histdef2d(iff, o_fsw_srf(nsrf)) CALL histdef2d(iff, o_wbils_srf(nsrf)) CALL histdef2d(iff, o_wbilo_srf(nsrf)) IF (iflag_pbl>1 ) then CALL histdef2d(iff, o_tke_srf(nsrf)) CALL histdef2d(iff, o_tke_max_srf(nsrf)) ENDIF CALL histdef2d(iff, o_albe_srf(nsrf)) CALL histdef2d(iff, o_rugs_srf(nsrf)) CALL histdef2d(iff, o_ages_srf(nsrf)) END DO IF (new_aod .AND. (.NOT. aerosol_couple)) THEN IF (ok_ade.OR.ok_aie) THEN CALL histdef2d(iff,o_od550aer) CALL histdef2d(iff,o_od865aer) CALL histdef2d(iff,o_absvisaer) CALL histdef2d(iff,o_od550lt1aer) CALL histdef2d(iff,o_sconcso4) CALL histdef2d(iff,o_sconcoa) CALL histdef2d(iff,o_sconcbc) CALL histdef2d(iff,o_sconcss) CALL histdef2d(iff,o_sconcdust) CALL histdef3d(iff,o_concso4) CALL histdef3d(iff,o_concoa) CALL histdef3d(iff,o_concbc) CALL histdef3d(iff,o_concss) CALL histdef3d(iff,o_concdust) CALL histdef2d(iff,o_loadso4) CALL histdef2d(iff,o_loadoa) CALL histdef2d(iff,o_loadbc) CALL histdef2d(iff,o_loadss) CALL histdef2d(iff,o_loaddust) !--STRAT AER ENDIF IF (ok_ade.OR.ok_aie.OR.flag_aerosol_strat) THEN DO naero = 1, naero_spc CALL histdef2d(iff, o_tausumaero(naero)) END DO ENDIF ENDIF IF (ok_ade) THEN CALL histdef2d(iff,o_topswad) CALL histdef2d(iff,o_topswad0) CALL histdef2d(iff,o_solswad) CALL histdef2d(iff,o_solswad0) CALL histdef2d(iff,o_swtoaas_nat) CALL histdef2d(iff,o_swsrfas_nat) CALL histdef2d(iff,o_swtoacs_nat) CALL histdef2d(iff,o_swsrfcs_nat) CALL histdef2d(iff,o_swtoaas_ant) CALL histdef2d(iff,o_swsrfas_ant) CALL histdef2d(iff,o_swtoacs_ant) CALL histdef2d(iff,o_swsrfcs_ant) IF (.NOT. aerosol_couple) THEN CALL histdef2d(iff,o_swtoacf_nat) CALL histdef2d(iff,o_swsrfcf_nat) CALL histdef2d(iff,o_swtoacf_ant) CALL histdef2d(iff,o_swsrfcf_ant) CALL histdef2d(iff,o_swtoacf_zero) CALL histdef2d(iff,o_swsrfcf_zero) ENDIF ENDIF IF (ok_aie) THEN CALL histdef2d(iff,o_topswai) CALL histdef2d(iff,o_solswai) !Cloud droplet number concentration CALL histdef3d(iff,o_scdnc) CALL histdef2d(iff,o_cldncl) CALL histdef3d(iff,o_reffclws) CALL histdef3d(iff,o_reffclwc) CALL histdef2d(iff,o_cldnvi) CALL histdef3d(iff,o_lcc3d) CALL histdef3d(iff,o_lcc3dcon) CALL histdef3d(iff,o_lcc3dstra) CALL histdef2d(iff,o_lcc) CALL histdef2d(iff,o_reffclwtop) ENDIF CALL histdef2d(iff,o_alb1) CALL histdef2d(iff,o_alb2) CALL histdef2d(iff,o_cdrm) CALL histdef2d(iff,o_cdrh) CALL histdef2d(iff,o_cldl) CALL histdef2d(iff,o_cldm) CALL histdef2d(iff,o_cldh) CALL histdef2d(iff,o_cldt) CALL histdef2d(iff,o_cldq) CALL histdef2d(iff,o_lwp) CALL histdef2d(iff,o_iwp) CALL histdef2d(iff,o_ue) CALL histdef2d(iff,o_ve) CALL histdef2d(iff,o_uq) CALL histdef2d(iff,o_vq) IF(iflag_con.GE.3) THEN ! sb CALL histdef2d(iff,o_cape) CALL histdef2d(iff,o_pbase) CALL histdef2d(iff,o_ptop) CALL histdef2d(iff,o_fbase) IF (iflag_con /= 30) THEN CALL histdef2d(iff,o_plcl) CALL histdef2d(iff,o_plfc) CALL histdef2d(iff,o_wbeff) ENDIF CALL histdef2d(iff,o_cape_max) CALL histdef3d(iff,o_upwd) CALL histdef3d(iff,o_Ma) CALL histdef3d(iff,o_dnwd) CALL histdef3d(iff,o_dnwd0) CALL histdef3d(iff,o_mc) CALL histdef2d(iff,o_ftime_con) ENDIF !iflag_con .GE. 3 CALL histdef2d(iff,o_prw) CALL histdef2d(iff,o_s_pblh) CALL histdef2d(iff,o_s_pblt) CALL histdef2d(iff,o_s_lcl) CALL histdef2d(iff,o_s_therm) !IM : Les champs suivants (s_oliqCL, s_cteiCL, s_trmb1, s_trmb2, s_trmb3) ne sont pas definis dans HBTM.F !CALL histdef2d(iff, & !o_s_capCL%flag,o_s_capCL%name, "Conv avlbl pot enerfor ABL", "J/m2" ) !CALL histdef2d(iff, & !o_s_oliqCL%flag,o_s_oliqCL%name, "Liq Water in BL", "kg/m2") !CALL histdef2d(iff, & !o_s_cteiCL%flag,o_s_cteiCL%name, "Instability criteria(ABL)", "K") !CALL histdef2d(iff, & !o_s_trmb1%flag,o_s_trmb1%name, "deep_cape(HBTM2)", "J/m2") !CALL histdef2d(iff, & !o_s_trmb2%flag,o_s_trmb2%name, "inhibition (HBTM2)", "J/m2") !CALL histdef2d(iff, & !o_s_trmb3%flag,o_s_trmb3%name, "Point Omega (HBTM2)", "m") ! Champs interpolles sur des niveaux de pression ! Attention a reverifier ilev=0 DO k=1, nlevSTD bb2=clevSTD(k) IF(bb2.EQ."850".OR.bb2.EQ."700".OR.bb2.EQ."500".OR.bb2.EQ."200" & .OR.bb2.EQ."100".OR.bb2.EQ."50".OR.bb2.EQ."10")THEN ilev=ilev+1 ! print*,'ilev k bb2 flag name ',ilev,k, bb2,o_uSTDlevs(ilev)%flag,o_uSTDlevs(ilev)%name CALL histdef2d(iff,o_uSTDlevs(ilev)) CALL histdef2d(iff,o_vSTDlevs(ilev)) CALL histdef2d(iff,o_wSTDlevs(ilev)) CALL histdef2d(iff,o_zSTDlevs(ilev)) CALL histdef2d(iff,o_qSTDlevs(ilev)) CALL histdef2d(iff,o_tSTDlevs(ilev)) ENDIF !(bb2.EQ."850".OR.bb2.EQ."700".OR."500".OR.bb2.EQ."200".OR.bb2.EQ."50".OR.bb2.EQ."10") ENDDO CALL histdef2d(iff,o_t_oce_sic) IF (type_ocean=='slab') THEN CALL histdef2d(iff,o_slab_bils) ENDIF ! Couplage conv-CL IF (iflag_con.GE.3) THEN IF (iflag_coupl>=1) THEN CALL histdef2d(iff,o_ale_bl) CALL histdef2d(iff,o_alp_bl) ENDIF ENDIF !(iflag_con.GE.3) CALL histdef2d(iff,o_weakinv) CALL histdef2d(iff,o_dthmin) CALL histdef2d(iff,o_rh2m) CALL histdef2d(iff,o_rh2m_min) CALL histdef2d(iff,o_rh2m_max) CALL histdef2d(iff,o_qsat2m) CALL histdef2d(iff,o_tpot) CALL histdef2d(iff,o_tpote) CALL histdef2d(iff,o_SWnetOR) CALL histdef2d(iff,o_SWdownOR) CALL histdef2d(iff,o_LWdownOR) CALL histdef2d(iff,o_snowl) CALL histdef2d(iff,o_solldown) CALL histdef2d(iff,o_dtsvdfo) CALL histdef2d(iff,o_dtsvdft) CALL histdef2d(iff,o_dtsvdfg) CALL histdef2d(iff,o_dtsvdfi) CALL histdef2d(iff,o_rugs) ! Champs 3D: CALL histdef3d(iff,o_ec550aer) CALL histdef3d(iff,o_lwcon) CALL histdef3d(iff,o_iwcon) CALL histdef3d(iff,o_temp) CALL histdef3d(iff,o_theta) CALL histdef3d(iff,o_ovap) CALL histdef3d(iff,o_oliq) CALL histdef3d(iff,o_ovapinit) CALL histdef3d(iff,o_geop) CALL histdef3d(iff,o_vitu) CALL histdef3d(iff,o_vitv) CALL histdef3d(iff,o_vitw) CALL histdef3d(iff,o_pres) CALL histdef3d(iff,o_paprs) CALL histdef3d(iff,o_mass) CALL histdef3d(iff,o_zfull) CALL histdef3d(iff,o_zhalf) CALL histdef3d(iff,o_rneb) CALL histdef3d(iff,o_rnebcon) CALL histdef3d(iff,o_rnebls) CALL histdef3d(iff,o_rhum) CALL histdef3d(iff,o_ozone) IF (read_climoz == 2) THEN CALL histdef3d(iff,o_ozone_light) END IF CALL histdef3d(iff,o_dtphy) CALL histdef3d(iff,o_dqphy) CALL histdef3d(iff,o_cldtau) CALL histdef3d(iff,o_cldemi) !IM: bug ?? dimensionnement variables (klon,klev+1) pmflxr, pmflxs, prfl, psfl CALL histdef3d(iff,o_pr_con_l) CALL histdef3d(iff,o_pr_con_i) CALL histdef3d(iff,o_pr_lsc_l) CALL histdef3d(iff,o_pr_lsc_i) !Cloud droplet effective radius CALL histdef3d(iff,o_re) CALL histdef3d(iff,o_fl) !FH Sorties pour la couche limite IF (iflag_pbl>1) THEN CALL histdef3d(iff,o_tke) CALL histdef3d(iff,o_tke_max) ENDIF CALL histdef3d(iff,o_kz) CALL histdef3d(iff,o_kz_max) CALL histdef3d(iff,o_clwcon) CALL histdef3d(iff,o_dtdyn) CALL histdef3d(iff,o_dqdyn) CALL histdef3d(iff,o_dudyn) CALL histdef3d(iff,o_dvdyn) CALL histdef3d(iff,o_dtcon) CALL histdef3d(iff,o_ducon) CALL histdef3d(iff,o_dvcon) CALL histdef3d(iff,o_dqcon) ! Wakes IF(iflag_con.EQ.3) THEN IF (iflag_wake >= 1) THEN CALL histdef2d(iff,o_ale_wk) CALL histdef2d(iff,o_alp_wk) CALL histdef2d(iff,o_ale) CALL histdef2d(iff,o_alp) CALL histdef2d(iff,o_cin) CALL histdef2d(iff,o_wape) CALL histdef2d(iff,o_wake_h) CALL histdef2d(iff,o_wake_s) CALL histdef3d(iff,o_dtwak) CALL histdef3d(iff,o_dqwak) CALL histdef3d(iff,o_wake_deltat) CALL histdef3d(iff,o_wake_deltaq) CALL histdef3d(iff,o_wake_omg) ENDIF !!! RomP CALL histdef3d(iff,o_Vprecip%flag,o_Vprecip%name, "precipitation vertical profile", "-") CALL histdef3d(iff,o_ftd) CALL histdef3d(iff,o_fqd) ENDIF !(iflag_con.EQ.3) IF(iflag_con.GE.3) THEN ! RomP >>> CALL histdef3d(iff,o_wdtrainA) CALL histdef3d(iff,o_wdtrainM) CALL histdef3d(iff,o_Vprecip) ENDIF !(iflag_con.GE.3) ! <<< RomP !!! nrlmd le 10/04/2012 IF (iflag_trig_bl>=1) THEN CALL histdef2d(iff,o_n2) CALL histdef2d(iff,o_s2) CALL histdef2d(iff,o_proba_notrig) CALL histdef2d(iff,o_random_notrig) CALL histdef2d(iff,o_ale_bl_trig) CALL histdef2d(iff,o_ale_bl_stat) ENDIF !(iflag_trig_bl>=1) IF (iflag_clos_bl>=1) THEN CALL histdef2d(iff,o_alp_bl_det) CALL histdef2d(iff,o_alp_bl_fluct_m) CALL histdef2d(iff,o_alp_bl_fluct_tke) CALL histdef2d(iff,o_alp_bl_conv) CALL histdef2d(iff,o_alp_bl_stat) ENDIF !(iflag_clos_bl>=1) !!! fin nrlmd le 10/04/2012 CALL histdef3d(iff,o_dtlsc) CALL histdef3d(iff,o_dtlschr) CALL histdef3d(iff,o_dqlsc) CALL histdef3d(iff,o_beta_prec) CALL histdef3d(iff,o_dtvdf) CALL histdef3d(iff,o_dtdis) CALL histdef3d(iff,o_dqvdf) CALL histdef3d(iff,o_dteva) CALL histdef3d(iff,o_dqeva) CALL histdef3d(iff,o_ptconv) CALL histdef3d(iff,o_ratqs) CALL histdef3d(iff,o_dtthe) IF (iflag_thermals.ge.1) THEN CALL histdef3d(iff,o_dqlscth) CALL histdef3d(iff,o_dqlscst) CALL histdef3d(iff,o_dtlscth) CALL histdef3d(iff,o_dtlscst) CALL histdef2d(iff,o_plulth) CALL histdef2d(iff,o_plulst) CALL histdef2d(iff,o_lmaxth) CALL histdef3d(iff,o_ptconvth) CALL histdef3d(iff,o_f_th) CALL histdef3d(iff,o_e_th) CALL histdef3d(iff,o_w_th) CALL histdef3d(iff,o_lambda_th) CALL histdef2d(iff,o_ftime_th) CALL histdef3d(iff,o_q_th) CALL histdef3d(iff,o_a_th) CALL histdef3d(iff,o_d_th) CALL histdef2d(iff,o_f0_th) CALL histdef2d(iff,o_zmax_th) CALL histdef3d(iff,o_dqthe) ENDIF !iflag_thermals.ge.1 CALL histdef3d(iff,o_dtajs) CALL histdef3d(iff,o_dqajs) CALL histdef3d(iff,o_dtswr) CALL histdef3d(iff,o_dtsw0) CALL histdef3d(iff,o_dtlwr) CALL histdef3d(iff,o_dtlw0) CALL histdef3d(iff,o_dtec) CALL histdef3d(iff,o_duvdf) CALL histdef3d(iff,o_dvvdf) IF (ok_orodr) THEN CALL histdef3d(iff,o_duoro) CALL histdef3d(iff,o_dvoro) CALL histdef3d(iff,o_dtoro) ENDIF IF (ok_orolf) THEN CALL histdef3d(iff,o_dulif) CALL histdef3d(iff,o_dvlif) CALL histdef3d(iff,o_dtlif) ENDIF IF (ok_hines) then CALL histdef3d(iff,o_duhin) CALL histdef3d(iff,o_dvhin) CALL histdef3d(iff,o_dthin) ENDIF CALL histdef3d(iff,o_rsu) CALL histdef3d(iff,o_rsd) CALL histdef3d(iff,o_rlu) CALL histdef3d(iff,o_rld) CALL histdef3d(iff,o_rsucs) CALL histdef3d(iff,o_rsdcs) CALL histdef3d(iff,o_rlucs) CALL histdef3d(iff,o_rldcs) CALL histdef3d(iff,o_tnt) CALL histdef3d(iff,o_tntc) CALL histdef3d(iff,o_tntr) CALL histdef3d(iff,o_tntscpbl) CALL histdef3d(iff,o_tnhus) CALL histdef3d(iff,o_tnhusc) CALL histdef3d(iff,o_tnhusscpbl) CALL histdef3d(iff,o_evu) CALL histdef3d(iff,o_h2o) CALL histdef3d(iff,o_mcd) CALL histdef3d(iff,o_dmc) CALL histdef3d(iff,o_ref_liq) CALL histdef3d(iff,o_ref_ice) IF (RCO2_per.NE.RCO2_act.OR.RCH4_per.NE.RCH4_act.OR. & RN2O_per.NE.RN2O_act.OR.RCFC11_per.NE.RCFC11_act.OR. & RCFC12_per.NE.RCFC12_act) THEN CALL histdef2d(iff,o_rsut4co2) CALL histdef2d(iff,o_rlut4co2) CALL histdef2d(iff,o_rsutcs4co2) CALL histdef2d(iff,o_rlutcs4co2) CALL histdef3d(iff,o_rsu4co2) CALL histdef3d(iff,o_rlu4co2) CALL histdef3d(iff,o_rsucs4co2) CALL histdef3d(iff,o_rlucs4co2) CALL histdef3d(iff,o_rsd4co2) CALL histdef3d(iff,o_rld4co2) CALL histdef3d(iff,o_rsdcs4co2) CALL histdef3d(iff,o_rldcs4co2) ENDIF IF (nqtot>=3) THEN DO iq=3,nqtot iiq=niadv(iq) o_trac(iq-2) = ctrl_out((/ 4, 5, 1, 1, 1, 10 /),tname(iiq),'Tracer '//ttext(iiq), "-",& (/ '', '', '', '', '', '' /)) CALL histdef3d(iff, o_trac(iq-2)) o_trac_cum(iq-2) = ctrl_out((/ 3, 4, 10, 10, 10, 10 /),'cum'//tname(iiq),& 'Cumulated tracer '//ttext(iiq), "-", (/ '', '', '', '', '', '' /)) CALL histdef2d(iff, o_trac_cum(iq-2)) ENDDO ENDIF CALL histend(nid_files(iff)) ndex2d = 0 ndex3d = 0 ENDIF ! clef_files ENDDO ! iff ! Updated write frequencies due to phys_out_filetimesteps. ! Write frequencies are now in seconds. ecrit_mth = ecrit_files(1) ecrit_day = ecrit_files(2) ecrit_hf = ecrit_files(3) ecrit_ins = ecrit_files(4) ecrit_LES = ecrit_files(5) ecrit_ins = ecrit_files(6) WRITE(lunout,*)'swaero_diag=',swaero_diag WRITE(lunout,*)'Fin phys_output_mod.F90' end SUBROUTINE phys_output_open SUBROUTINE histdef2d_old (iff,lpoint,flag_var,nomvar,titrevar,unitvar) USE ioipsl USE dimphy USE mod_phys_lmdz_para USE iophy IMPLICIT NONE INCLUDE "dimensions.h" INCLUDE "temps.h" INCLUDE "clesphys.h" INTEGER :: iff LOGICAL :: lpoint INTEGER, DIMENSION(nfiles) :: flag_var CHARACTER(LEN=20) :: nomvar CHARACTER(LEN=*) :: titrevar CHARACTER(LEN=*) :: unitvar REAL zstophym IF (type_ecri(iff)=='inst(X)'.OR.type_ecri(iff)=='once') THEN zstophym=zoutm(iff) ELSE zstophym=zdtime ENDIF ! Appel a la lecture des noms et niveau d'ecriture des variables dans output.def CALL conf_physoutputs(nomvar,flag_var) IF(.NOT.lpoint) THEN IF ( flag_var(iff)<=lev_files(iff) ) THEN CALL histdef (nid_files(iff),nomvar,titrevar,unitvar, & iim,jj_nb,nhorim(iff), 1,1,1, -99, 32, & type_ecri(iff), zstophym,zoutm(iff)) ENDIF ELSE IF ( flag_var(iff)<=lev_files(iff) ) THEN CALL histdef (nid_files(iff),nomvar,titrevar,unitvar, & npstn,1,nhorim(iff), 1,1,1, -99, 32, & type_ecri(iff), zstophym,zoutm(iff)) ENDIF ENDIF ! Set swaero_diag=true if at least one of the concerned variables are defined IF (nomvar=='topswad' .OR. nomvar=='topswai' .OR. nomvar=='solswad' .OR. nomvar=='solswai' ) THEN IF ( flag_var(iff)<=lev_files(iff) ) THEN swaero_diag=.TRUE. END IF END IF END SUBROUTINE histdef2d_old SUBROUTINE histdef2d (iff,var) USE ioipsl USE dimphy USE mod_phys_lmdz_para USE iophy IMPLICIT NONE INCLUDE "dimensions.h" INCLUDE "temps.h" INCLUDE "clesphys.h" INTEGER :: iff TYPE(ctrl_out) :: var REAL zstophym CHARACTER(LEN=20) :: typeecrit ! ug On récupère le type écrit de la structure: ! Assez moche, à refaire si meilleure méthode... IF (INDEX(var%type_ecrit(iff), "once") > 0) THEN typeecrit = 'once' ELSE IF(INDEX(var%type_ecrit(iff), "t_min") > 0) THEN typeecrit = 't_min(X)' ELSE IF(INDEX(var%type_ecrit(iff), "t_max") > 0) THEN typeecrit = 't_max(X)' ELSE IF(INDEX(var%type_ecrit(iff), "inst") > 0) THEN typeecrit = 'inst(X)' ELSE typeecrit = type_ecri_files(iff) ENDIF IF (typeecrit=='inst(X)'.OR.typeecrit=='once') THEN zstophym=zoutm(iff) ELSE zstophym=zdtime ENDIF ! Appel a la lecture des noms et niveau d'ecriture des variables dans output.def CALL conf_physoutputs(var%name, var%flag) IF(.NOT.clef_stations(iff)) THEN IF ( var%flag(iff)<=lev_files(iff) ) THEN CALL histdef (nid_files(iff), var%name, var%description, var%unit, & iim,jj_nb,nhorim(iff), 1,1,1, -99, 32, & typeecrit, zstophym,zoutm(iff)) ENDIF ELSE IF ( var%flag(iff)<=lev_files(iff)) THEN CALL histdef (nid_files(iff), var%name, var%description, var%unit, & npstn,1,nhorim(iff), 1,1,1, -99, 32, & typeecrit, zstophym,zoutm(iff)) ENDIF ENDIF ! Set swaero_diag=true if at least one of the concerned variables are defined IF (var%name=='topswad' .OR. var%name=='topswai' .OR. var%name=='solswad' .OR. var%name=='solswai' ) THEN IF ( var%flag(iff)<=lev_files(iff) ) THEN swaero_diag=.TRUE. END IF END IF END SUBROUTINE histdef2d SUBROUTINE histdef3d_old (iff,lpoint,flag_var,nomvar,titrevar,unitvar) USE ioipsl USE dimphy USE mod_phys_lmdz_para USE iophy IMPLICIT NONE INCLUDE "dimensions.h" INCLUDE "temps.h" ! INCLUDE "indicesol.h" INCLUDE "clesphys.h" INTEGER :: iff LOGICAL :: lpoint INTEGER, DIMENSION(nfiles) :: flag_var CHARACTER(LEN=20) :: nomvar CHARACTER(LEN=*) :: titrevar CHARACTER(LEN=*) :: unitvar REAL zstophym ! Appel a la lecture des noms et niveau d'ecriture des variables dans output.def CALL conf_physoutputs(nomvar,flag_var) IF (type_ecri(iff)=='inst(X)'.OR.type_ecri(iff)=='once') THEN zstophym=zoutm(iff) ELSE zstophym=zdtime ENDIF IF(.NOT.lpoint) THEN IF ( flag_var(iff)<=lev_files(iff) ) THEN CALL histdef (nid_files(iff), nomvar, titrevar, unitvar, & iim, jj_nb, nhorim(iff), klev, levmin(iff), & levmax(iff)-levmin(iff)+1, nvertm(iff), 32, type_ecri(iff), & zstophym, zoutm(iff)) ENDIF ELSE IF ( flag_var(iff)<=lev_files(iff) ) THEN CALL histdef (nid_files(iff), nomvar, titrevar, unitvar, & npstn,1,nhorim(iff), klev, levmin(iff), & levmax(iff)-levmin(iff)+1, nvertm(iff), 32, & type_ecri(iff), zstophym,zoutm(iff)) ENDIF ENDIF END SUBROUTINE histdef3d_old SUBROUTINE histdef3d (iff,var) USE ioipsl USE dimphy USE mod_phys_lmdz_para USE iophy IMPLICIT NONE INCLUDE "dimensions.h" INCLUDE "temps.h" INCLUDE "clesphys.h" INTEGER :: iff TYPE(ctrl_out) :: var REAL zstophym CHARACTER(LEN=20) :: typeecrit ! ug On récupère le type écrit de la structure: ! Assez moche, à refaire si meilleure méthode... IF (INDEX(var%type_ecrit(iff), "once") > 0) THEN typeecrit = 'once' ELSE IF(INDEX(var%type_ecrit(iff), "t_min") > 0) THEN typeecrit = 't_min(X)' ELSE IF(INDEX(var%type_ecrit(iff), "t_max") > 0) THEN typeecrit = 't_max(X)' ELSE IF(INDEX(var%type_ecrit(iff), "inst") > 0) THEN typeecrit = 'inst(X)' ELSE typeecrit = type_ecri_files(iff) ENDIF ! Appel a la lecture des noms et niveau d'ecriture des variables dans output.def CALL conf_physoutputs(var%name,var%flag) IF (typeecrit=='inst(X)'.OR.typeecrit=='once') THEN zstophym=zoutm(iff) ELSE zstophym=zdtime ENDIF IF(.NOT.clef_stations(iff)) THEN IF ( var%flag(iff)<=lev_files(iff) ) THEN CALL histdef (nid_files(iff), var%name, var%description, var%unit, & iim, jj_nb, nhorim(iff), klev, levmin(iff), & levmax(iff)-levmin(iff)+1, nvertm(iff), 32, typeecrit, & zstophym, zoutm(iff)) ENDIF ELSE IF ( var%flag(iff)<=lev_files(iff)) THEN CALL histdef (nid_files(iff), var%name, var%description, var%unit, & npstn,1,nhorim(iff), klev, levmin(iff), & levmax(iff)-levmin(iff)+1, nvertm(iff), 32, & typeecrit, zstophym,zoutm(iff)) ENDIF ENDIF END SUBROUTINE histdef3d SUBROUTINE conf_physoutputs(nam_var,flag_var) !!! Lecture des noms et niveau de sortie des variables dans output.def ! en utilisant les routines getin de IOIPSL use ioipsl IMPLICIT NONE include 'iniprint.h' CHARACTER(LEN=20) :: nam_var INTEGER, DIMENSION(nfiles) :: flag_var IF(prt_level>10) WRITE(lunout,*)'Avant getin: nam_var flag_var ',nam_var,flag_var(:) CALL getin('flag_'//nam_var,flag_var) CALL getin('name_'//nam_var,nam_var) IF(prt_level>10) WRITE(lunout,*)'Apres getin: nam_var flag_var ',nam_var,flag_var(:) END SUBROUTINE conf_physoutputs SUBROUTINE convers_timesteps(str,dtime,timestep) use ioipsl USE phys_cal_mod IMPLICIT NONE CHARACTER(LEN=20) :: str CHARACTER(LEN=10) :: type INTEGER :: ipos,il real :: ttt,xxx,timestep,dayseconde,dtime parameter (dayseconde=86400.) include "temps.h" include "comconst.h" include "iniprint.h" ipos=scan(str,'0123456789.',.TRUE.) ! il=len_trim(str) WRITE(lunout,*)ipos,il read(str(1:ipos),*) ttt WRITE(lunout,*)ttt type=str(ipos+1:il) IF ( il == ipos ) then type='day' endif IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) then WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len timestep = ttt * dayseconde * mth_len endif IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24. IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60. IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt IF ( type == 'TS' ) timestep = ttt * dtime WRITE(lunout,*)'type = ',type WRITE(lunout,*)'nb j/h/m = ',ttt WRITE(lunout,*)'timestep(s)=',timestep END SUBROUTINE convers_timesteps END MODULE phys_output_mod