MODULE lmdz_ratqs_multi !============================================= ! A FAIRE : ! Traiter le probleme de USE lmdz_lscp_tools, ONLY: CALC_QSAT_ECMWF !============================================= !============================================= ! module containing subroutines that take ! into account the effect of convection, orography, ! surface heterogeneities and subgrid-scale ! turbulence on ratqs, i.e. on the width of the ! total water subgrid distribution. !============================================= USE yoethf_mod_h IMPLICIT NONE ! Include !============================================= CONTAINS !======================================================================== SUBROUTINE ratqs_inter(klon,klev,iflag_ratqs,pdtphys,paprs, & ratqsbas, wake_deltaq, wake_s, q_seri,qtc_cv, sigt_cv, & fm_therm,entr_therm,detr_therm,detrain_cv,fm_cv,fqd,fqcomp,sigd, & ratqs_inter_,sigma_qtherm) USE lmdz_ratqs_ini, ONLY : a_ratqs_cv,tau_var,fac_tau,tau_cumul,a_ratqs_wake, dqimpl USE lmdz_ratqs_ini, ONLY : RG USE lmdz_ratqs_ini, ONLY : povariance, var_conv USE lmdz_thermcell_dq, ONLY : thermcell_dq implicit none !======================================================================== ! L. d'Alen??on, 25/02/2021 ! Cette subroutine calcule une valeur de ratqsbas interactive ! Elle est appel??e par la subroutine ratqs lorsque iflag_ratqs = 11. !======================================================================== ! Declarations ! Input integer,intent(in) :: klon,klev,iflag_ratqs real,intent(in) :: pdtphys,ratqsbas real, dimension(klon,klev+1),intent(in) :: paprs real, dimension(klon,klev),intent(in) :: wake_deltaq, q_seri,qtc_cv, sigt_cv real, dimension(klon),intent(in) :: wake_s real, dimension(klon,klev+1),intent(in) :: fm_therm real, dimension(klon,klev),intent(in) :: entr_therm,detr_therm,detrain_cv,fm_cv,fqd,fqcomp real, dimension(klon),intent(in) :: sigd ! Output real, dimension(klon,klev),intent(inout) :: ratqs_inter_ ! local LOGICAL :: klein = .false. LOGICAL :: klein_conv = .true. REAL :: taup0 = 70000 REAL :: taudp = 500 integer :: lev_out=10 REAL, DIMENSION (klon,klev) :: zmasse,entr0,detr0,detraincv,dqp,detrain_p,q0,qd0,tau_diss REAL, DIMENSION (klon,klev+1) :: fm0 integer i,k real, dimension(klon,klev) :: wake_dq real, dimension(klon) :: max_sigd, max_dqconv,max_sigt real, dimension(klon,klev) :: zoa,zocarrea,pdocarreadj,pocarre,po,pdoadj,varq_therm real, dimension(klon,klev) :: var_moy, var_var, var_desc_th,var_det_conv,var_desc_prec,var_desc_conv,sigma_qtherm lev_out=0. print*,'ratqs_inter' !----------------------------------------------------------------------- ! Calcul des masses !----------------------------------------------------------------------- do k=1,klev zmasse(:,k)=(paprs(:,k)-paprs(:,k+1))/RG enddo !------------------------------------------------------------------------- ! Caclul du terme de d??trainement de la variance pour les thermiques !------------------------------------------------------------------------- ! initialisations do k=1,klev do i=1,klon tau_diss(i,k)=tau_var +0.5*fac_tau*tau_var*(tanh((taup0-paprs(i,k))/taudp) + 1.) enddo enddo entr0(:,:) = entr_therm(:,:) fm0(:,:) = fm_therm(:,:) detr0(:,:) = detr_therm(:,:) ! calcul du carr?? de l'humidit?? sp??cifique et circulation dans les thermiques po(:,:) = q_seri(:,:) call thermcell_dq(klon,klev,dqimpl,pdtphys,fm0,entr0,zmasse, & & po,pdoadj,zoa,lev_out) do k=1,klev do i=1,klon pocarre(i,k)=po(i,k)*po(i,k) + povariance(i,k) enddo enddo call thermcell_dq(klon,klev,dqimpl,pdtphys,fm0,entr0,zmasse, & & pocarre,pdocarreadj,zocarrea,lev_out) ! variance de l'humidit?? sp??cifique totale dans les thermiques do k=1,klev do i=1,klon varq_therm(i,k)=zocarrea(i,k)-zoa(i,k)*zoa(i,k) enddo enddo ! calcul des termes sources de la variance avec thermiques et convection profonde (voir Klein 2005 par exemple) do k=1,klev do i=1,klon var_moy(i,k) = detr0(i,k)*((zoa(i,k)-po(i,k))**2)/zmasse(i,k) var_var(i,k) = detr0(i,k)*(varq_therm(i,k)-povariance(i,k))/zmasse(i,k) var_det_conv(i,k) = a_ratqs_cv*(detrain_cv(i,k)/zmasse(i,k)) if (sigd(i).ne.0) then var_desc_prec(i,k) = sigd(i)*(1-sigd(i))*(fqd(i,k)*tau_cumul/sigd(i))**2/tau_cumul else var_desc_prec(i,k) = 0 endif enddo enddo do k=1,klev-1 do i=1,klon var_desc_th(i,k) = fm0(i,k+1)*povariance(i,k+1)/zmasse(i,k) - & fm0(i,k)*povariance(i,k)/zmasse(i,k) var_desc_conv(i,k) = ((povariance(i,k+1)-povariance(i,k))*(fm_cv(i,k)/zmasse(i,k))) enddo enddo var_desc_th(:,klev) = var_desc_th(:,klev-1) var_desc_conv(:,klev) = var_desc_conv(:,klev-1) if (klein) then do k=1,klev-1 do i=1,klon qd0(:,:) = 0.0 if (sigd(i).ne.0) then qd0(i,k) = fqd(i,k)*tau_cumul/sigd(i) endif enddo enddo do k=1,klev-1 do i=1,klon povariance(i,k)= (var_moy(i,k) + var_var(i,k) + var_desc_th(i,k) + & var_det_conv(i,k) + var_desc_prec(i,k) & + var_desc_conv(i,k))*pdtphys + povariance(i,k) povariance(i,k)= povariance(i,k)*exp(-pdtphys/tau_diss(i,k)) enddo enddo povariance(:,klev) = povariance(:,klev-1) else ! calcul direct qd0(:,:) = 0.0 q0(:,:) = 0.0 do k=1,klev-1 do i=1,klon if (sigd(i).ne.0) then ! termes de variance par accumulation qd0(i,k) = fqd(i,k)*tau_cumul/sigd(i) endif if (sigt_cv(i,k).ne.0) then q0(i,k) = fqcomp(i,k)*tau_cumul/sigt_cv(i,k) endif enddo enddo do k=1,klev-1 do i=1,klon povariance(i,k)= (pdocarreadj(i,k)-2.*po(i,k)*pdoadj(i,k) + & a_ratqs_cv*(sigt_cv(i,k)*(1-sigt_cv(i,k))*q0(i,k)**2/tau_cumul + var_desc_prec(i,k) + & var_desc_conv(i,k)))*pdtphys + povariance(i,k) povariance(i,k)=povariance(i,k)*exp(-pdtphys/tau_diss(i,k)) enddo enddo povariance(:,klev) = povariance(:,klev-1) ! fqd(:,:)=sigt_cv(:,:)*(1-sigt_cv(:,:))*q0(:,:)**2/tau_cumul endif !------------------------------------------------------------------------- ! Caclul du ratqs_inter_ !------------------------------------------------------------------------- do k=1,klev do i=1,klon if(q_seri(i,k).ge.1E-7) then ratqs_inter_(i,k) = abs(povariance(i,k))**0.5/q_seri(i,k) sigma_qtherm(i,k) = abs(varq_therm(i,k))**0.5 ! sigma dans les thermiques else ratqs_inter_(i,k) = 0. sigma_qtherm(i,k) = 0. endif enddo enddo return END SUBROUTINE ratqs_inter !------------------------------------------------------------------ SUBROUTINE ratqs_oro(klon,klev,pctsrf,zstd,qsat,temp,pplay,paprs,ratqs_oro_) ! Etienne Vignon, November 2021: effect of subgrid orography on ratqs USE lmdz_ratqs_ini, ONLY : RG,RV,RD,RLSTT,RLVTT,RTT,nbsrf,is_lic,is_ter IMPLICIT NONE ! Declarations !-------------- ! INPUTS INTEGER, INTENT(IN) :: klon ! number of horizontal grid points INTEGER, INTENT(IN) :: klev ! number of vertical layers REAL, DIMENSION(klon,nbsrf) :: pctsrf REAL, DIMENSION(klon,klev), INTENT(IN) :: qsat ! saturation specific humidity [kg/kg] REAL, DIMENSION(klon), INTENT(IN) :: zstd ! sub grid orography standard deviation REAL, DIMENSION(klon,klev), INTENT(IN) :: temp ! air temperature [K] REAL, DIMENSION(klon,klev), INTENT(IN) :: pplay ! air pressure, layer's center [Pa] REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs ! air pressure, lower inteface [Pa] ! OUTPUTS REAL, DIMENSION(klon,klev), INTENT(out) :: ratqs_oro_ ! ratqs profile due to subgrid orography ! LOCAL INTEGER :: i,k REAL, DIMENSION(klon) :: orogradT,xsi0 REAL, DIMENSION (klon,klev) :: zlay REAL :: Lvs, temp0 ! Calculation of the near-surface temperature gradient along the topography !-------------------------------------------------------------------------- ! at the moment, we fix it at a constant value (moist adiab. lapse rate) orogradT(:)=-6.5/1000. ! K/m ! Calculation of near-surface surface ratqs !------------------------------------------- DO i=1,klon temp0=temp(i,1) IF (temp0 .LT. RTT) THEN Lvs=RLSTT ELSE Lvs=RLVTT ENDIF xsi0(i)=zstd(i)*ABS(orogradT(i))*Lvs/temp0/temp0/RV ratqs_oro_(i,1)=xsi0(i) END DO ! Vertical profile of ratqs assuming an exponential decrease with height !------------------------------------------------------------------------ ! calculation of geop. height AGL zlay(:,1)= RD*temp(:,1)/(0.5*(paprs(:,1)+pplay(:,1))) & *(paprs(:,1)-pplay(:,1))/RG DO k=2,klev DO i = 1, klon zlay(i,k)= zlay(i,k-1)+RD*0.5*(temp(i,k-1)+temp(i,k)) & /paprs(i,k)*(pplay(i,k-1)-pplay(i,k))/RG ratqs_oro_(i,k)=MAX(0.0,pctsrf(i,is_ter)*xsi0(i)*exp(-zlay(i,k)/MAX(zstd(i),1.))) END DO END DO END SUBROUTINE ratqs_oro !============================================= SUBROUTINE ratqs_hetero(klon,klev,pctsrf,s_pblh,t2m,q2m,temp,q,pplay,paprs,ratqs_hetero_) ! Etienne Vignon, November 2021 ! Effect of subgrid surface heterogeneities on ratqs USE lmdz_lscp_tools, ONLY: CALC_QSAT_ECMWF USE lmdz_ratqs_ini, ONLY : RG,RD,RTT,nbsrf IMPLICIT NONE ! INPUTS INTEGER, INTENT(IN) :: klon ! number of horizontal grid points INTEGER, INTENT(IN) :: klev ! number of vertical layers REAL, DIMENSION(klon) :: s_pblh ! height of the planetary boundary layer(HPBL) REAL, DIMENSION(klon,nbsrf) :: pctsrf ! Fractional cover of subsurfaces REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: t2m ! 2m temperature for each tile [K] REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: q2m ! 2m specific humidity for each tile [kg/kg] REAL, DIMENSION(klon,klev), INTENT(IN) :: temp ! air temperature [K] REAL, DIMENSION(klon,klev), INTENT(IN) :: q ! specific humidity [kg/kg] REAL, DIMENSION(klon,klev), INTENT(IN) :: pplay ! air pressure, layer's center [Pa] REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs ! air pressure, lower inteface [Pa] ! OUTPUTS REAL, DIMENSION(klon,klev), INTENT(out) :: ratqs_hetero_ ! ratsq profile due to surface heterogeneities INTEGER :: i,k,nsrf REAL, DIMENSION(klon) :: xsi0, ratiom, qsat2m, dqsatdT REAL, DIMENSION (klon,klev) :: zlay ! Calculation of near-surface surface ratqs !------------------------------------------- ratiom(:)=0. xsi0(:)=0. DO nsrf=1,nbsrf CALL CALC_QSAT_ECMWF(klon,t2m(:,nsrf),q2m(:,nsrf),paprs(:,1),RTT,0,.false.,qsat2m,dqsatdT) ratiom(:)=ratiom(:)+pctsrf(:,nsrf)*(q2m(:,nsrf)/qsat2m(:)) xsi0(:)=xsi0(:)+pctsrf(:,nsrf)*((q2m(:,nsrf)/qsat2m(:)-ratiom(:))**2) END DO xsi0(:)=sqrt(xsi0(:))/(ratiom(:)+1E-6) ! Vertical profile of ratqs assuming an exponential decrease with height !------------------------------------------------------------------------ ! calculation of geop. height AGL zlay(:,1)= RD*temp(:,1)/(0.5*(paprs(:,1)+pplay(:,1))) & *(paprs(:,1)-pplay(:,1))/RG ratqs_hetero_(:,1)=xsi0(:) DO k=2,klev DO i = 1, klon zlay(i,k)= zlay(i,k-1)+RD*0.5*(temp(i,k-1)+temp(i,k)) & /paprs(i,k)*(pplay(i,k-1)-pplay(i,k))/RG ratqs_hetero_(i,k)=MAX(xsi0(i)*exp(-zlay(i,k)/(s_pblh(i)+1.0)),0.0) END DO END DO END SUBROUTINE ratqs_hetero !============================================= SUBROUTINE ratqs_tke(klon,klev,pdtphys,temp,q,qsat,pplay,paprs,omega,tke,tke_dissip,lmix,wprime,ratqs_tke_) ! References: ! ! Etienne Vignon: effect of subgrid turbulence on ratqs ! ! Field, P.R., Hill, A., Furtado, K., Korolev, A., 2014b. Mixed-phase clouds in a turbulent environment. Part ! 2: analytic treatment. Q. J. R. Meteorol. Soc. 21, 2651???2663. https://doi.org/10.1002/qj.2175. ! ! Furtado, K., Field, P.R., Boutle, I.A., Morcrette, C.R., Wilkinson, J., 2016. A physically-based, subgrid ! parametrization for the production and maintenance of mixed-phase clouds in a general circulation ! model. J. Atmos. Sci. 73, 279???291. https://doi.org/10.1175/JAS-D-15-0021. USE lmdz_ratqs_ini, ONLY : RG,RV,RD,RCPD,RLSTT,RLVTT,RTT IMPLICIT NONE ! INPUTS INTEGER, INTENT(IN) :: klon ! number of horizontal grid points INTEGER, INTENT(IN) :: klev ! number of vertical layers REAL, INTENT(IN) :: pdtphys ! physics time step [s] REAL, DIMENSION(klon,klev), INTENT(IN) :: temp ! air temperature [K] REAL, DIMENSION(klon,klev), INTENT(IN) :: q ! specific humidity [kg/kg] REAL, DIMENSION(klon,klev), INTENT(IN) :: qsat ! saturation specific humidity [kg/kg] REAL, DIMENSION(klon,klev), INTENT(IN) :: pplay ! air pressure, layer's center [Pa] REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs ! air pressure, lower inteface [Pa] REAL, DIMENSION(klon,klev), INTENT(IN) :: omega ! air pressure, lower inteface [Pa] REAL, DIMENSION(klon,klev+1), INTENT(IN) :: tke ! Turbulent Kinetic Energy [m2/s2] REAL, DIMENSION(klon,klev+1), INTENT(IN) :: tke_dissip ! Turbulent Kinetic Energy Dissipation rate [m2/s3] REAL, DIMENSION(klon,klev+1), INTENT(IN) :: lmix ! Turbulent mixing length REAL, DIMENSION(klon,klev+1), INTENT(IN) :: wprime ! Turbulent vertical velocity scale [m/s] ! OUTPUTS REAL, DIMENSION(klon,klev), INTENT(out) :: ratqs_tke_ ! ratsq profile due to subgrid TKE ! LOCAL INTEGER :: i, k REAL :: AA, DD, NW, AAprime, VARLOG,rho,Lvs,taue,lhomo,dissmin,maxvarlog REAL, DIMENSION(klon,klev) :: sigmaw,w REAL, PARAMETER :: C0=10.0 REAL, PARAMETER :: lmin=0.001 REAL, PARAMETER :: ratqsmin=1E-6 REAL, PARAMETER :: ratqsmax=0.5 ! Calculation of large scale and turbulent vertical velocities !--------------------------------------------------------------- DO k=1,klev DO i=1,klon rho=pplay(i,k)/temp(i,k)/RD w(i,k)=-rho*RG*omega(i,k) sigmaw(i,k)=0.5*(wprime(i,k+1)+wprime(i,k)) ! turbulent vertical velocity at the middle of model layers. END DO END DO ! Calculation of ratqs !--------------------------------------------------------------- ratqs_tke_(:,1)=ratqsmin ! set to a very low value to avoid division by 0 in order parts ! of the code DO k=2,klev ! we start from second model level since TKE is not defined at k=1 DO i=1,klon IF (temp(i,k) .LT. RTT) THEN Lvs=RLSTT ELSE Lvs=RLVTT ENDIF dissmin=0.01*(0.5*(tke(i,k)+tke(i,k+1))/pdtphys) maxvarlog=LOG(1.0+ratqsmax**2)! to prevent ratqs from exceeding an arbitrary threshold value AA=RG*(Lvs/(RCPD*temp(i,k)*temp(i,k)*RV) - 1./(RD*temp(i,k))) lhomo=MAX(0.5*(lmix(i,k)+lmix(i,k+1)),lmin) taue=(lhomo*lhomo/MAX(0.5*(tke_dissip(i,k)+tke_dissip(i,k+1)),dissmin))**(1./3) ! Fields et al. 2014 DD=1.0/taue NW=(sigmaw(i,k)**2)*SQRT(2./(C0*MAX(0.5*(tke_dissip(i,k)+tke_dissip(i,k+1)),dissmin))) AAprime=AA*NW VARLOG=AAprime/2./DD VARLOG=MIN(VARLOG,maxvarlog) ratqs_tke_(i,k)=SQRT(MAX(EXP(VARLOG)-1.0,ratqsmin)) END DO END DO END SUBROUTINE ratqs_tke END MODULE lmdz_ratqs_multi