! $Header$
SUBROUTINE convect3(dtime, epmax, ok_adj, t1, r1, rs, u, v, tra, p, ph, nd, &
ndp1, nl, ntra, delt, iflag, ft, fr, fu, fv, ftra, precip, icb, inb, &
upwd, dnwd, dnwd0, sig, w0, mike, mke, ma, ments, qents, tps, tls, sigij, &
cape, tvp, pbase, buoybase, & ! ccc *
! DTVPDT1,DTVPDQ1,DPLCLDT,DPLCLDR)
dtvpdt1, dtvpdq1, dplcldt, dplcldr, & ! sbl
ft2, fr2, fu2, fv2, wd, qcond, qcondc) ! sbl
! *** THE PARAMETER NA SHOULD IN GENERAL EQUAL ND ***
! #################################################################
! Fleur Introduction des traceurs dans convect3 le 6 juin 200
! #################################################################
USE yomcst_mod_h
USE dimphy
USE infotrac_phy, ONLY: nbtr
IMPLICIT NONE
INTEGER na
PARAMETER (na=60)
REAL deltac ! cld
PARAMETER (deltac=0.01) ! cld
INTEGER nent(na)
INTEGER nd, ndp1, nl, ntra, iflag, icb, inb
REAL dtime, epmax, delt, precip, cape
REAL dplcldt, dplcldr
REAL t1(nd), r1(nd), rs(nd), u(nd), v(nd), tra(nd, ntra)
REAL p(nd), ph(ndp1)
REAL ft(nd), fr(nd), fu(nd), fv(nd), ftra(nd, ntra)
REAL sig(nd), w0(nd)
REAL uent(na, na), vent(na, na), traent(na, na, nbtr), tratm(na)
REAL up(na), vp(na), trap(na, nbtr)
REAL m(na), mp(na), ment(na, na), qent(na, na), elij(na, na)
REAL sij(na, na), tvp(na), tv(na), water(na)
REAL rp(na), ep(na), th(na), wt(na), evap(na), clw(na)
REAL sigp(na), b(na), tp(na), cpn(na)
REAL lv(na), lvcp(na), h(na), hp(na), gz(na)
REAL t(na), rr(na)
REAL ft2(nd), fr2(nd), fu2(nd), fv2(nd) ! added sbl
REAL u1(nd), v1(nd) ! added sbl
REAL buoy(na) ! Lifted parcel buoyancy
REAL dtvpdt1(nd), dtvpdq1(nd) ! Derivatives of parcel virtual
! temperature wrt T1 and Q1
REAL clw_new(na), qi(na)
REAL wd, betad ! for gust factor (sb)
REAL qcondc(nd) ! interface cld param (sb)
REAL qcond(nd), nqcond(na), wa(na), maa(na), siga(na), axc(na) ! cld
LOGICAL ice_conv, ok_adj
PARAMETER (ice_conv=.TRUE.)
! ccccccccccccccccccccccccccccccccccccccccccccc
! declaration des variables a sortir
! cccccccccccccccccccccccccccccccccccccccccccc
REAL mke(nd)
REAL mike(nd)
REAL ma(nd)
REAL tps(nd) !temperature dans les ascendances non diluees
REAL tls(nd) !temperature potentielle
REAL ments(nd, nd)
REAL qents(nd, nd)
REAL sigij(klev, klev)
REAL pbase ! pressure at the cloud base level
REAL buoybase ! buoyancy at the cloud base level
! ccccccccccccccccccccccccccccccccccccccccccccc
REAL :: cpv,cl,cpvmcl,eps,alv0,rdcp,pbcrit,ptcrit,sigd,spfac
REAL :: tau,beta,alpha,dtcrit,dtovsh,ahm,rm,um,vm,dphinv
REAL :: a2,x,tvx,tvy,plcl,pden,dpbase,tvpbase,tvbase,tdif
REAL :: ath1,ath,delti,deltap,dcape,dlnp,sigold,dtmin,fac,w
REAL :: amu,rti,cpd,bf2,anum,denom,dei,altem,cwat,stemp,qp
REAL :: scrit,alt,smax,asij,wgh,sjmax,sjmin,smid,delp,delm
REAL :: asum,bsum,csum,wflux,tinv,wdtrain,awat,afac,afac1,afac2
REAL :: bfac,pr1,pr2,sigt,b6,c6,revap,tevap,delth,amfac,amp2
REAL :: xf,tf,af,bf,fac2,ur,sru,d,ampmax,dpinv,am,amde,cpinv
REAL :: amp1,ad,rat,ax,bx,cx,dx,ex,dsum
INTEGER :: nk,i,j,nopt,jn,k,im,jm,n
REAL dnwd0(nd) ! precipitation driven unsaturated downdraft flux
REAL dnwd(nd), dn1 ! in-cloud saturated downdraft mass flux
REAL upwd(nd), up1 ! in-cloud saturated updraft mass flux
! *** ASSIGN VALUES OF THERMODYNAMIC CONSTANTS ***
! *** THESE SHOULD BE CONSISTENT WITH ***
! *** THOSE USED IN CALLING PROGRAM ***
! *** NOTE: THESE ARE ALSO SPECIFIED IN SUBROUTINE TLIFT ***
! sb CPD=1005.7
! sb CPV=1870.0
! sb CL=4190.0
! sb CPVMCL=CL-CPV
! sb RV=461.5
! sb RD=287.04
! sb EPS=RD/RV
! sb ALV0=2.501E6
! cccccccccccccccccccccc
! constantes coherentes avec le modele du Centre Europeen
! sb RD = 1000.0 * 1.380658E-23 * 6.0221367E+23 / 28.9644
! sb RV = 1000.0 * 1.380658E-23 * 6.0221367E+23 / 18.0153
! sb CPD = 3.5 * RD
! sb CPV = 4.0 * RV
! sb CL = 4218.0
! sb CPVMCL=CL-CPV
! sb EPS=RD/RV
! sb ALV0=2.5008E+06
! ccccccccccccccccccccc
! on utilise les constantes thermo du Centre Europeen: (SB)
cpd = rcpd
cpv = rcpv
cl = rcw
cpvmcl = cl - cpv
eps = rd/rv
alv0 = rlvtt
nk = 1 ! origin level of the lifted parcel
! ccccccccccccccccccccc
! *** INITIALIZE OUTPUT ARRAYS AND PARAMETERS ***
DO i = 1, nd
ft(i) = 0.0
fr(i) = 0.0
fu(i) = 0.0
fv(i) = 0.0
ft2(i) = 0.0
fr2(i) = 0.0
fu2(i) = 0.0
fv2(i) = 0.0
DO j = 1, ntra
ftra(i, j) = 0.0
END DO
qcondc(i) = 0.0 ! cld
qcond(i) = 0.0 ! cld
nqcond(i) = 0.0 ! cld
t(i) = t1(i)
rr(i) = r1(i)
u1(i) = u(i) ! added sbl
v1(i) = v(i) ! added sbl
END DO
DO i = 1, nl
rdcp = (rd*(1.-rr(i))+rr(i)*rv)/(cpd*(1.-rr(i))+rr(i)*cpv)
th(i) = t(i)*(1000.0/p(i))**rdcp
END DO
! ************************************************************
! * CALCUL DES TEMPERATURES POTENTIELLES A SORTIR
! ************************************************************
DO i = 1, nd
rdcp = (rd*(1.-rr(i))+rr(i)*rv)/(cpd*(1.-rr(i))+rr(i)*cpv)
tls(i) = t(i)*(1000.0/p(i))**rdcp
END DO
! ***********************************************************
precip = 0.0
wd = 0.0 ! sb
iflag = 1
! *** SPECIFY PARAMETERS ***
! *** PBCRIT IS THE CRITICAL CLOUD DEPTH (MB) BENEATH WHICH THE ***
! *** PRECIPITATION EFFICIENCY IS ASSUMED TO BE ZERO ***
! *** PTCRIT IS THE CLOUD DEPTH (MB) ABOVE WHICH THE PRECIP. ***
! *** EFFICIENCY IS ASSUMED TO BE UNITY ***
! *** SIGD IS THE FRACTIONAL AREA COVERED BY UNSATURATED DNDRAFT ***
! *** SPFAC IS THE FRACTION OF PRECIPITATION FALLING OUTSIDE ***
! *** OF CLOUD ***
! *** ALPHA AND BETA ARE PARAMETERS THAT CONTROL THE RATE OF ***
! *** APPROACH TO QUASI-EQUILIBRIUM ***
! *** (THEIR STANDARD VALUES ARE 1.0 AND 0.96, RESPECTIVELY) ***
! *** (BETA MUST BE LESS THAN OR EQUAL TO 1) ***
! *** DTCRIT IS THE CRITICAL BUOYANCY (K) USED TO ADJUST THE ***
! *** APPROACH TO QUASI-EQUILIBRIUM ***
! *** IT MUST BE LESS THAN 0 ***
pbcrit = 150.0
ptcrit = 500.0
sigd = 0.01
spfac = 0.15
! sb:
! EPMAX=0.993 ! precip efficiency less than unity
! EPMAX=1. ! precip efficiency less than unity
! jyg
! CC BETA=0.96
! Beta is now expressed as a function of the characteristic time
! of the convective process.
! CC Old value : TAU = 15000. !(for dtime = 600.s)
! CC Other value (inducing little change) :TAU = 8000.
tau = 8000.
beta = 1. - dtime/tau
! jyg
! CC ALPHA=1.0
alpha = 1.5E-3*dtime/tau
! Increase alpha in order to compensate W decrease
alpha = alpha*1.5
! jyg (voir CONVECT 3)
! CC DTCRIT=-0.2
dtcrit = -2.
! gf&jyg
! CC DT pour l'overshoot.
dtovsh = -0.2
! *** INCREMENT THE COUNTER ***
sig(nd) = sig(nd) + 1.0
sig(nd) = amin1(sig(nd), 12.1)
! *** IF NOPT IS AN INTEGER OTHER THAN 0, CONVECT ***
! *** RETURNS ARRAYS T AND R THAT MAY HAVE BEEN ***
! *** ALTERED BY DRY ADIABATIC ADJUSTMENT; OTHERWISE ***
! *** THE RETURNED ARRAYS ARE UNALTERED. ***
nopt = 0
! ! NOPT=1 ! sbl
! *** PERFORM DRY ADIABATIC ADJUSTMENT ***
! *** DO NOT BYPASS THIS EVEN IF THE CALLING PROGRAM HAS A ***
! *** BOUNDARY LAYER SCHEME !!! ***
IF (ok_adj) THEN ! added sbl
DO i = nl - 1, 1, -1
jn = 0
DO j = i + 1, nl
IF (th(j)
=2000.0) THEN
iflag = 2
RETURN
END IF
! jyg1
! Essais de modification de ICB
! *** CALCULATE FIRST LEVEL ABOVE LCL (=ICB) ***
! C ICB=NL-1
! C DO 50 I=2,NL-1
! C IF(P(I).LT.PLCL)THEN
! C ICB=MIN(ICB,I) ! ICB sup ou egal a 2
! C END IF
! C 50 CONTINUE
! C IF(ICB.EQ.(NL-1))THEN
! C IFLAG=3
! C RETURN
! C END IF
! *** CALCULATE LAYER CONTAINING LCL (=ICB) ***
icb = nl - 1
! sb DO 50 I=2,NL-1
DO i = 3, nl - 1 ! modif sb pour que ICB soit sup/egal a 2
! la modification consiste a comparer PLCL a PH et non a P:
! ICB est defini par : PH(ICB)p(icb)) THEN
! sb CALL TLIFT(P,T,RR,RS,GZ,PLCL,ICB,TVP,TP,CLW,ND,NL)
CALL tlift(p, t, rr, rs, gz, plcl, icb, nk, tvp, tp, clw, nd, nl, &
dtvpdt1, dtvpdq1)
ELSE
! sb CALL TLIFT(P,T,RR,RS,GZ,PLCL,ICB+1,TVP,TP,CLW,ND,NL)
CALL tlift(p, t, rr, rs, gz, plcl, icb+1, nk, tvp, tp, clw, nd, nl, &
dtvpdt1, dtvpdq1)
END IF
! jyg2
! *****************************************************************************
! *** SORTIE DE LA TEMPERATURE DE L ASCENDANCE NON DILUE
! *****************************************************************************
DO i = 1, nd
tps(i) = tp(i)
END DO
! *****************************************************************************
! *** SET THE PRECIPITATION EFFICIENCIES AND THE FRACTION OF ***
! *** PRECIPITATION FALLING OUTSIDE OF CLOUD ***
! *** THESE MAY BE FUNCTIONS OF TP(I), P(I) AND CLW(I) ***
DO i = 1, nl
pden = ptcrit - pbcrit
! jyg
! cc EP(I)=(P(ICB)-P(I)-PBCRIT)/PDEN
! sb EP(I)=(PLCL-P(I)-PBCRIT)/PDEN
ep(i) = (plcl-p(i)-pbcrit)/pden*epmax ! sb
ep(i) = amax1(ep(i), 0.0)
! sb EP(I)=AMIN1(EP(I),1.0)
ep(i) = amin1(ep(i), epmax) ! sb
sigp(i) = spfac
! *** CALCULATE VIRTUAL TEMPERATURE AND LIFTED PARCEL ***
! *** VIRTUAL TEMPERATURE ***
tv(i) = t(i)*(1.+rr(i)/eps-rr(i))
! cd1
! . Keep all liquid water in lifted parcel (-> adiabatic CAPE)
! cc TVP(I)=TVP(I)-TP(I)*(RR(1)-EP(I)*CLW(I))
! !!! sb TVP(I)=TVP(I)-TP(I)*RR(1) ! calcule dans tlift
! cd2
! *** Calculate first estimate of buoyancy
buoy(i) = tvp(i) - tv(i)
END DO
! *** Set Cloud Base Buoyancy at (Plcl+DPbase) level buoyancy
dpbase = -40. !That is 400m above LCL
pbase = plcl + dpbase
tvpbase = tvp(icb)*(pbase-p(icb+1))/(p(icb)-p(icb+1)) + &
tvp(icb+1)*(p(icb)-pbase)/(p(icb)-p(icb+1))
tvbase = tv(icb)*(pbase-p(icb+1))/(p(icb)-p(icb+1)) + &
tv(icb+1)*(p(icb)-pbase)/(p(icb)-p(icb+1))
! test sb:
! @ write(*,*) '++++++++++++++++++++++++++++++++++++++++'
! @ write(*,*) 'plcl,dpbas,tvpbas,tvbas,tvp(icb),tvp(icb1)
! @ : ,tv(icb),tv(icb1)'
! @ write(*,*) plcl,dpbase,tvpbase,tvbase,tvp(icb)
! @ L ,tvp(icb+1),tv(icb),tv(icb+1)
! @ write(*,*) '++++++++++++++++++++++++++++++++++++++++'
! fin test sb
buoybase = tvpbase - tvbase
! C Set buoyancy = BUOYBASE for all levels below BASE.
! C For safety, set : BUOY(ICB) = BUOYBASE
DO i = icb, nl
IF (p(i)>=pbase) THEN
buoy(i) = buoybase
END IF
END DO
buoy(icb) = buoybase
! sb3d print *,'buoybase,tvp_tv,tvpbase,tvbase,pbase,plcl'
! sb3d $, buoybase,tvp(icb)-tv(icb),tvpbase,tvbase,pbase,plcl
! sb3d print *,'TVP ',(tvp(i),i=1,nl)
! sb3d print *,'TV ',(tv(i),i=1,nl)
! sb3d print *, 'P ',(p(i),i=1,nl)
! sb3d print *,'ICB ',icb
! test sb:
! @ write(*,*) '@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@'
! @ write(*,*) 'icb,icbs,inb,buoybase:'
! @ write(*,*) icb,icb+1,inb,buoybase
! @ write(*,*) 'k,tvp,tv,tp,buoy,ep: '
! @ do k=1,nl
! @ write(*,*) k,tvp(k),tv(k),tp(k),buoy(k),ep(k)
! @ enddo
! @ write(*,*) '@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@'
! fin test sb
! *** MAKE SURE THAT COLUMN IS DRY ADIABATIC BETWEEN THE SURFACE ***
! *** AND CLOUD BASE, AND THAT LIFTED AIR IS POSITIVELY BUOYANT ***
! *** AT CLOUD BASE ***
! *** IF NOT, RETURN TO CALLING PROGRAM AFTER RESETTING ***
! *** SIG(I) AND W0(I) ***
! jyg
! CC TDIF=TVP(ICB)-TV(ICB)
tdif = buoy(icb)
ath1 = th(1)
! jyg
! CC ATH=TH(ICB-1)-1.0
ath = th(icb-1) - 5.0
! ATH=0. ! ajout sb
! IF (ICB.GT.1) ATH=TH(ICB-1)-5.0 ! modif sb
IF (tdifath1) THEN
DO i = 1, nl
sig(i) = beta*sig(i) - 2.*alpha*tdif*tdif
sig(i) = amax1(sig(i), 0.0)
w0(i) = beta*w0(i)
END DO
iflag = 0
RETURN
END IF
! *** IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
! ***
! *** NOW INITIALIZE VARIOUS ARRAYS USED IN THE COMPUTATIONS
! ***
DO i = 1, nl
hp(i) = h(i)
wt(i) = 0.001
rp(i) = rr(i)
up(i) = u(i)
vp(i) = v(i)
DO j = 1, ntra
trap(i, j) = tra(i, j)
END DO
nent(i) = 0
water(i) = 0.0
evap(i) = 0.0
b(i) = 0.0
mp(i) = 0.0
m(i) = 0.0
lv(i) = alv0 - cpvmcl*(t(i)-273.15)
lvcp(i) = lv(i)/cpn(i)
DO j = 1, nl
qent(i, j) = rr(j)
elij(i, j) = 0.0
ment(i, j) = 0.0
sij(i, j) = 0.0
uent(i, j) = u(j)
vent(i, j) = v(j)
DO k = 1, ntra
traent(i, j, k) = tra(j, k)
END DO
END DO
END DO
delti = 1.0/delt
! *** FIND THE FIRST MODEL LEVEL (INB) ABOVE THE PARCEL'S ***
! *** LEVEL OF NEUTRAL BUOYANCY ***
inb = nl - 1
DO i = icb, nl - 1
! jyg
! CC IF((TVP(I)-TV(I)).LT.DTCRIT)THEN
IF (buoy(i)INB AND I12.0) THEN
DO i = 1, nl - 1
sig(i) = 0.0
w0(i) = 0.0
END DO
END IF
! *** CALCULATE LIQUID WATER STATIC ENERGY OF LIFTED PARCEL ***
DO i = icb, inb
hp(i) = h(1) + (lv(i)+(cpd-cpv)*t(i))*ep(i)*clw(i)
END DO
! *** CALCULATE CONVECTIVE AVAILABLE POTENTIAL ENERGY (CAPE), ***
! *** VERTICAL VELOCITY (W), FRACTIONAL AREA COVERED BY ***
! *** UNDILUTE UPDRAFT (SIG), AND UPDRAFT MASS FLUX (M) ***
cape = 0.0
DO i = icb + 1, inb
! jyg1
! CC CAPE=CAPE+RD*(TVP(I-1)-TV(I-1))*(PH(I-1)-PH(I))/P(I-1)
! CC DCAPE=RD*BUOY(I-1)*(PH(I-1)-PH(I))/P(I-1)
! CC DLNP=(PH(I-1)-PH(I))/P(I-1)
! The interval on which CAPE is computed starts at PBASE :
deltap = min(pbase, ph(i-1)) - min(pbase, ph(i))
cape = cape + rd*buoy(i-1)*deltap/p(i-1)
dcape = rd*buoy(i-1)*deltap/p(i-1)
dlnp = deltap/p(i-1)
! jyg2
! sb3d print *,'buoy,dlnp,dcape,cape',buoy(i-1),dlnp,dcape,cape
! test sb:
! @ write(*,*) '############################################'
! @ write(*,*) 'cape,rrd,buoy,deltap,p,pbase,ph:'
! @ : ,cape,rd,buoy(i-1),deltap,p(i-1),pbase,ph(i)
! @ write(*,*) '############################################'
! fin test sb
cape = amax1(0.0, cape)
sigold = sig(i)
dtmin = 100.0
DO j = icb, i - 1
! jyg
! CC DTMIN=AMIN1(DTMIN,(TVP(J)-TV(J)))
dtmin = amin1(dtmin, buoy(j))
END DO
! sb3d print *, 'DTMIN, BETA, ALPHA, SIG = ',DTMIN,BETA,ALPHA,SIG(I)
sig(i) = beta*sig(i) + alpha*dtmin*abs(dtmin)
sig(i) = amax1(sig(i), 0.0)
sig(i) = amin1(sig(i), 0.01)
fac = amin1(((dtcrit-dtmin)/dtcrit), 1.0)
! jyg
! C Essais de reduction de la vitesse
! C FAC = FAC*.5
w = (1.-beta)*fac*sqrt(cape) + beta*w0(i)
amu = 0.5*(sig(i)+sigold)*w
m(i) = amu*0.007*p(i)*(ph(i)-ph(i+1))/tv(i)
! --------- test sb:
! write(*,*) '############################################'
! write(*,*) 'k,amu,buoy(k-1),deltap,w,beta,fac,cape,w0(k)'
! write(*,*) i,amu,buoy(i-1),deltap
! : ,w,beta,fac,cape,w0(i)
! write(*,*) '############################################'
! ---------
w0(i) = w
END DO
w0(icb) = 0.5*w0(icb+1)
m(icb) = 0.5*m(icb+1)*(ph(icb)-ph(icb+1))/(ph(icb+1)-ph(icb+2))
sig(icb) = sig(icb+1)
sig(icb-1) = sig(icb)
! jyg1
! sb3d print *, 'Cloud base, c. top, CAPE',ICB,INB,cape
! sb3d print *, 'SIG ',(sig(i),i=1,inb)
! sb3d print *, 'W ',(w0(i),i=1,inb)
! sb3d print *, 'M ',(m(i), i=1,inb)
! sb3d print *, 'Dt1 ',(tvp(i)-tv(i),i=1,inb)
! sb3d print *, 'Dt_vrai ',(buoy(i),i=1,inb)
! jyg2
! *** CALCULATE ENTRAINED AIR MASS FLUX (MENT), TOTAL WATER MIXING ***
! *** RATIO (QENT), TOTAL CONDENSED WATER (ELIJ), AND MIXING ***
! *** FRACTION (SIJ) ***
DO i = icb, inb
rti = rr(1) - ep(i)*clw(i)
DO j = icb - 1, inb
bf2 = 1. + lv(j)*lv(j)*rs(j)/(rv*t(j)*t(j)*cpd)
anum = h(j) - hp(i) + (cpv-cpd)*t(j)*(rti-rr(j))
denom = h(i) - hp(i) + (cpd-cpv)*(rr(i)-rti)*t(j)
dei = denom
IF (abs(dei)<0.01) dei = 0.01
sij(i, j) = anum/dei
sij(i, i) = 1.0
altem = sij(i, j)*rr(i) + (1.-sij(i,j))*rti - rs(j)
altem = altem/bf2
cwat = clw(j)*(1.-ep(j))
stemp = sij(i, j)
IF ((stemp<0.0 .OR. stemp>1.0 .OR. altem>cwat) .AND. j>i) THEN
anum = anum - lv(j)*(rti-rs(j)-cwat*bf2)
denom = denom + lv(j)*(rr(i)-rti)
IF (abs(denom)<0.01) denom = 0.01
sij(i, j) = anum/denom
altem = sij(i, j)*rr(i) + (1.-sij(i,j))*rti - rs(j)
altem = altem - (bf2-1.)*cwat
END IF
IF (sij(i,j)>0.0 .AND. sij(i,j)<0.95) THEN
qent(i, j) = sij(i, j)*rr(i) + (1.-sij(i,j))*rti
uent(i, j) = sij(i, j)*u(i) + (1.-sij(i,j))*u(nk)
vent(i, j) = sij(i, j)*v(i) + (1.-sij(i,j))*v(nk)
DO k = 1, ntra
traent(i, j, k) = sij(i, j)*tra(i, k) + (1.-sij(i,j))*tra(nk, k)
END DO
elij(i, j) = altem
elij(i, j) = amax1(0.0, elij(i,j))
ment(i, j) = m(i)/(1.-sij(i,j))
nent(i) = nent(i) + 1
END IF
sij(i, j) = amax1(0.0, sij(i,j))
sij(i, j) = amin1(1.0, sij(i,j))
END DO
! *** IF NO AIR CAN ENTRAIN AT LEVEL I ASSUME THAT UPDRAFT DETRAINS
! ***
! *** AT THAT LEVEL AND CALCULATE DETRAINED AIR FLUX AND PROPERTIES
! ***
IF (nent(i)==0) THEN
ment(i, i) = m(i)
qent(i, i) = rr(nk) - ep(i)*clw(i)
uent(i, i) = u(nk)
vent(i, i) = v(nk)
DO j = 1, ntra
traent(i, i, j) = tra(nk, j)
END DO
elij(i, i) = clw(i)
sij(i, i) = 1.0
END IF
DO j = icb - 1, inb
sigij(i, j) = sij(i, j)
END DO
END DO
! *** NORMALIZE ENTRAINED AIR MASS FLUXES TO REPRESENT EQUAL ***
! *** PROBABILITIES OF MIXING ***
DO i = icb, inb
IF (nent(i)/=0) THEN
qp = rr(1) - ep(i)*clw(i)
anum = h(i) - hp(i) - lv(i)*(qp-rs(i)) + (cpv-cpd)*t(i)*(qp-rr(i))
denom = h(i) - hp(i) + lv(i)*(rr(i)-qp) + (cpd-cpv)*t(i)*(rr(i)-qp)
IF (abs(denom)<0.01) denom = 0.01
scrit = anum/denom
alt = qp - rs(i) + scrit*(rr(i)-qp)
IF (scrit<=0.0 .OR. alt<=0.0) scrit = 1.0
smax = 0.0
asij = 0.0
DO j = inb, icb - 1, -1
IF (sij(i,j)>1.0E-16 .AND. sij(i,j)<0.95) THEN
wgh = 1.0
IF (j>i) THEN
sjmax = amax1(sij(i,j+1), smax)
sjmax = amin1(sjmax, scrit)
smax = amax1(sij(i,j), smax)
sjmin = amax1(sij(i,j-1), smax)
sjmin = amin1(sjmin, scrit)
IF (sij(i,j)<(smax-1.0E-16)) wgh = 0.0
smid = amin1(sij(i,j), scrit)
ELSE
sjmax = amax1(sij(i,j+1), scrit)
smid = amax1(sij(i,j), scrit)
sjmin = 0.0
IF (j>1) sjmin = sij(i, j-1)
sjmin = amax1(sjmin, scrit)
END IF
delp = abs(sjmax-smid)
delm = abs(sjmin-smid)
asij = asij + wgh*(delp+delm)
ment(i, j) = ment(i, j)*(delp+delm)*wgh
END IF
END DO
asij = amax1(1.0E-16, asij)
asij = 1.0/asij
DO j = icb - 1, inb
ment(i, j) = ment(i, j)*asij
END DO
asum = 0.0
bsum = 0.0
DO j = icb - 1, inb
asum = asum + ment(i, j)
ment(i, j) = ment(i, j)*sig(j)
bsum = bsum + ment(i, j)
END DO
bsum = amax1(bsum, 1.0E-16)
bsum = 1.0/bsum
DO j = icb - 1, inb
ment(i, j) = ment(i, j)*asum*bsum
END DO
csum = 0.0
DO j = icb - 1, inb
csum = csum + ment(i, j)
END DO
IF (csum1) THEN
DO j = 1, i - 1
awat = elij(j, i) - (1.-ep(i))*clw(i)
awat = amax1(awat, 0.0)
wdtrain = wdtrain + 10.0*awat*ment(j, i)
END DO
END IF
! *** FIND RAIN WATER AND EVAPORATION USING PROVISIONAL ***
! *** ESTIMATES OF RP(I)AND RP(I-1) ***
wt(i) = 45.0
IF (iPH(I), PR1=1 & PR2=0
! Pour PH(I+1)0.0) THEN
revap = 0.5*(-b6+sqrt(b6*b6+4.*c6))
evap(i) = sigt*afac*revap
water(i) = revap*revap
ELSE
evap(i) = -evap(i+1) + 0.02*(wdtrain+sigd*wt(i)*water(i+1))/(sigd*(ph(i &
)-ph(i+1)))
END IF
! *** CALCULATE PRECIPITATING DOWNDRAFT MASS FLUX UNDER ***
! *** HYDROSTATIC APPROXIMATION ***
IF (i==1) GO TO 360
tevap = amax1(0.0, evap(i))
delth = amax1(0.001, (th(i)-th(i-1)))
mp(i) = 10.*lvcp(i)*sigd*tevap*(p(i-1)-p(i))/delth
! *** IF HYDROSTATIC ASSUMPTION FAILS, ***
! *** SOLVE CUBIC DIFFERENCE EQUATION FOR DOWNDRAFT THETA ***
! *** AND MASS FLUX FROM TWO SIMULTANEOUS DIFFERENTIAL EQNS ***
amfac = sigd*sigd*70.0*ph(i)*(p(i-1)-p(i))*(th(i)-th(i-1))/(tv(i)*th(i))
amp2 = abs(mp(i+1)*mp(i+1)-mp(i)*mp(i))
IF (amp2>(0.1*amfac)) THEN
xf = 100.0*sigd*sigd*sigd*(ph(i)-ph(i+1))
tf = b(i) - 5.0*(th(i)-th(i-1))*t(i)/(lvcp(i)*sigd*th(i))
af = xf*tf + mp(i+1)*mp(i+1)*tinv
bf = 2.*(tinv*mp(i+1))**3 + tinv*mp(i+1)*xf*tf + &
50.*(p(i-1)-p(i))*xf*tevap
fac2 = 1.0
IF (bf<0.0) fac2 = -1.0
bf = abs(bf)
ur = 0.25*bf*bf - af*af*af*tinv*tinv*tinv
IF (ur>=0.0) THEN
sru = sqrt(ur)
fac = 1.0
IF ((0.5*bf-sru)<0.0) fac = -1.0
mp(i) = mp(i+1)*tinv + (0.5*bf+sru)**tinv + &
fac*(abs(0.5*bf-sru))**tinv
ELSE
d = atan(2.*sqrt(-ur)/(bf+1.0E-28))
IF (fac2<0.0) d = 3.14159 - d
mp(i) = mp(i+1)*tinv + 2.*sqrt(af*tinv)*cos(d*tinv)
END IF
mp(i) = amax1(0.0, mp(i))
b(i-1) = b(i) + 100.0*(p(i-1)-p(i))*tevap/(mp(i)+sigd*0.1) - &
10.0*(th(i)-th(i-1))*t(i)/(lvcp(i)*sigd*th(i))
b(i-1) = amax1(b(i-1), 0.0)
END IF
! *** LIMIT MAGNITUDE OF MP(I) TO MEET CFL CONDITION ***
ampmax = 2.0*(ph(i)-ph(i+1))*delti
amp2 = 2.0*(ph(i-1)-ph(i))*delti
ampmax = amin1(ampmax, amp2)
mp(i) = amin1(mp(i), ampmax)
! *** FORCE MP TO DECREASE LINEARLY TO ZERO ***
! *** BETWEEN CLOUD BASE AND THE SURFACE ***
IF (p(i)>p(icb)) THEN
mp(i) = mp(icb)*(p(1)-p(i))/(p(1)-p(icb))
END IF
360 CONTINUE
! *** FIND MIXING RATIO OF PRECIPITATING DOWNDRAFT ***
IF (i==inb) GO TO 400
rp(i) = rr(i)
IF (mp(i)>mp(i+1)) THEN
rp(i) = rp(i+1)*mp(i+1) + rr(i)*(mp(i)-mp(i+1)) + &
5.*sigd*(ph(i)-ph(i+1))*(evap(i+1)+evap(i))
rp(i) = rp(i)/mp(i)
up(i) = up(i+1)*mp(i+1) + u(i)*(mp(i)-mp(i+1))
up(i) = up(i)/mp(i)
vp(i) = vp(i+1)*mp(i+1) + v(i)*(mp(i)-mp(i+1))
vp(i) = vp(i)/mp(i)
DO j = 1, ntra
trap(i, j) = trap(i+1, j)*mp(i+1) + trap(i, j)*(mp(i)-mp(i+1))
trap(i, j) = trap(i, j)/mp(i)
END DO
ELSE
IF (mp(i+1)>1.0E-16) THEN
rp(i) = rp(i+1) + 5.0*sigd*(ph(i)-ph(i+1))*(evap(i+1)+evap(i))/mp(i+1 &
)
up(i) = up(i+1)
vp(i) = vp(i+1)
DO j = 1, ntra
trap(i, j) = trap(i+1, j)
END DO
END IF
END IF
rp(i) = amin1(rp(i), rs(i))
rp(i) = amax1(rp(i), 0.0)
400 END DO
! *** CALCULATE SURFACE PRECIPITATION IN MM/DAY ***
precip = wt(1)*sigd*water(1)*8640.0
! sb *** Calculate downdraft velocity scale and surface temperature and
! ***
! sb *** water vapor fluctuations
! ***
! sb (inspire de convect 4.3)
! BETAD=10.0
betad = 5.0
wd = betad*abs(mp(icb))*0.01*rd*t(icb)/(sigd*p(icb))
405 CONTINUE
! *** CALCULATE TENDENCIES OF LOWEST LEVEL POTENTIAL TEMPERATURE ***
! *** AND MIXING RATIO ***
dpinv = 1.0/(ph(1)-ph(2))
am = 0.0
DO k = 2, inb
am = am + m(k)
END DO
IF ((0.1*dpinv*am)>=delti) iflag = 4
ft(1) = 0.1*dpinv*am*(t(2)-t(1)+(gz(2)-gz(1))/cpn(1))
ft(1) = ft(1) - 0.5*lvcp(1)*sigd*(evap(1)+evap(2))
ft(1) = ft(1) - 0.09*sigd*mp(2)*t(1)*b(1)*dpinv
ft(1) = ft(1) + 0.01*sigd*wt(1)*(cl-cpd)*water(2)*(t(2)-t(1))*dpinv/cpn(1)
fr(1) = 0.1*mp(2)*(rp(2)-rr(1))* & ! correction bug conservation eau
! 1 DPINV+SIGD*0.5*(EVAP(1)+EVAP(2))
dpinv + sigd*0.5*(evap(1)+evap(2))
! IM cf. SBL
! 1 DPINV+SIGD*EVAP(1)
fr(1) = fr(1) + 0.1*am*(rr(2)-rr(1))*dpinv
fu(1) = fu(1) + 0.1*dpinv*(mp(2)*(up(2)-u(1))+am*(u(2)-u(1)))
fv(1) = fv(1) + 0.1*dpinv*(mp(2)*(vp(2)-v(1))+am*(v(2)-v(1)))
DO j = 1, ntra
ftra(1, j) = ftra(1, j) + 0.1*dpinv*(mp(2)*(trap(2,j)-tra(1, &
j))+am*(tra(2,j)-tra(1,j)))
END DO
amde = 0.0
DO j = 2, inb
fr(1) = fr(1) + 0.1*dpinv*ment(j, 1)*(qent(j,1)-rr(1))
fu(1) = fu(1) + 0.1*dpinv*ment(j, 1)*(uent(j,1)-u(1))
fv(1) = fv(1) + 0.1*dpinv*ment(j, 1)*(vent(j,1)-v(1))
DO k = 1, ntra
ftra(1, k) = ftra(1, k) + 0.1*dpinv*ment(j, 1)*(traent(j,1,k)-tra(1,k))
END DO
END DO
! *** CALCULATE TENDENCIES OF POTENTIAL TEMPERATURE AND MIXING RATIO ***
! *** AT LEVELS ABOVE THE LOWEST LEVEL ***
! *** FIRST FIND THE NET SATURATED UPDRAFT AND DOWNDRAFT MASS FLUXES ***
! *** THROUGH EACH LEVEL ***
DO i = 2, inb
dpinv = 1.0/(ph(i)-ph(i+1))
cpinv = 1.0/cpn(i)
amp1 = 0.0
DO k = i + 1, inb + 1
amp1 = amp1 + m(k)
END DO
DO k = 1, i
DO j = i + 1, inb + 1
amp1 = amp1 + ment(k, j)
END DO
END DO
IF ((0.1*dpinv*amp1)>=delti) iflag = 4
ad = 0.0
DO k = 1, i - 1
DO j = i, inb
ad = ad + ment(j, k)
END DO
END DO
ft(i) = 0.1*dpinv*(amp1*(t(i+1)-t(i)+(gz(i+1)-gz(i))*cpinv)-ad*(t(i)-t(i- &
1)+(gz(i)-gz(i-1))*cpinv)) - 0.5*sigd*lvcp(i)*(evap(i)+evap(i+1))
rat = cpn(i-1)*cpinv
ft(i) = ft(i) - 0.09*sigd*(mp(i+1)*t(i)*b(i)-mp(i)*t(i-1)*rat*b(i-1))* &
dpinv
ft(i) = ft(i) + 0.1*dpinv*ment(i, i)*(hp(i)-h(i)+t(i)*(cpv-cpd)*(rr(i)- &
qent(i,i)))*cpinv
ft(i) = ft(i) + 0.01*sigd*wt(i)*(cl-cpd)*water(i+1)*(t(i+1)-t(i))*dpinv* &
cpinv
fr(i) = 0.1*dpinv*(amp1*(rr(i+1)-rr(i))-ad*(rr(i)-rr(i-1)))
fu(i) = fu(i) + 0.1*dpinv*(amp1*(u(i+1)-u(i))-ad*(u(i)-u(i-1)))
fv(i) = fv(i) + 0.1*dpinv*(amp1*(v(i+1)-v(i))-ad*(v(i)-v(i-1)))
DO k = 1, ntra
ftra(i, k) = ftra(i, k) + 0.1*dpinv*(amp1*(tra(i+1,k)-tra(i, &
k))-ad*(tra(i,k)-tra(i-1,k)))
END DO
DO k = 1, i - 1
awat = elij(k, i) - (1.-ep(i))*clw(i)
awat = amax1(awat, 0.0)
fr(i) = fr(i) + 0.1*dpinv*ment(k, i)*(qent(k,i)-awat-rr(i))
fu(i) = fu(i) + 0.1*dpinv*ment(k, i)*(uent(k,i)-u(i))
fv(i) = fv(i) + 0.1*dpinv*ment(k, i)*(vent(k,i)-v(i))
! (saturated updrafts resulting from mixing) ! cld
qcond(i) = qcond(i) + (elij(k,i)-awat) ! cld
nqcond(i) = nqcond(i) + 1. ! cld
DO j = 1, ntra
ftra(i, j) = ftra(i, j) + 0.1*dpinv*ment(k, i)*(traent(k,i,j)-tra(i,j &
))
END DO
END DO
DO k = i, inb
fr(i) = fr(i) + 0.1*dpinv*ment(k, i)*(qent(k,i)-rr(i))
fu(i) = fu(i) + 0.1*dpinv*ment(k, i)*(uent(k,i)-u(i))
fv(i) = fv(i) + 0.1*dpinv*ment(k, i)*(vent(k,i)-v(i))
DO j = 1, ntra
ftra(i, j) = ftra(i, j) + 0.1*dpinv*ment(k, i)*(traent(k,i,j)-tra(i,j &
))
END DO
END DO
fr(i) = fr(i) + 0.5*sigd*(evap(i)+evap(i+1)) + 0.1*(mp(i+1)*(rp(i+ &
1)-rr(i))-mp(i)*(rp(i)-rr(i-1)))*dpinv
fu(i) = fu(i) + 0.1*(mp(i+1)*(up(i+1)-u(i))-mp(i)*(up(i)-u(i-1)))*dpinv
fv(i) = fv(i) + 0.1*(mp(i+1)*(vp(i+1)-v(i))-mp(i)*(vp(i)-v(i-1)))*dpinv
DO j = 1, ntra
ftra(i, j) = ftra(i, j) + 0.1*dpinv*(mp(i+1)*(trap(i+1,j)-tra(i, &
j))-mp(i)*(trap(i,j)-trap(i-1,j)))
END DO
! (saturated downdrafts resulting from mixing) ! cld
DO k = i + 1, inb ! cld
qcond(i) = qcond(i) + elij(k, i) ! cld
nqcond(i) = nqcond(i) + 1. ! cld
END DO ! cld
! (particular case: no detraining level is found) ! cld
IF (nent(i)==0) THEN ! cld
qcond(i) = qcond(i) + (1-ep(i))*clw(i) ! cld
nqcond(i) = nqcond(i) + 1. ! cld
END IF ! cld
IF (nqcond(i)/=0.) THEN ! cld
qcond(i) = qcond(i)/nqcond(i) ! cld
END IF ! cld
END DO
! *** MOVE THE DETRAINMENT AT LEVEL INB DOWN TO LEVEL INB-1 ***
! *** IN SUCH A WAY AS TO PRESERVE THE VERTICALLY ***
! *** INTEGRATED ENTHALPY AND WATER TENDENCIES ***
! test sb:
! @ write(*,*) '--------------------------------------------'
! @ write(*,*) 'inb,ft,hp,h,t,rr,qent,ment,water,waterp,wt,mp,b'
! @ write(*,*) inb,ft(inb),hp(inb),h(inb)
! @ : ,t(inb),rr(inb),qent(inb,inb)
! @ : ,ment(inb,inb),water(inb)
! @ : ,water(inb+1),wt(inb),mp(inb),b(inb)
! @ write(*,*) '--------------------------------------------'
! fin test sb:
ax = 0.1*ment(inb, inb)*(hp(inb)-h(inb)+t(inb)*(cpv-cpd)*(rr(inb)-qent(inb, &
inb)))/(cpn(inb)*(ph(inb)-ph(inb+1)))
ft(inb) = ft(inb) - ax
ft(inb-1) = ft(inb-1) + ax*cpn(inb)*(ph(inb)-ph(inb+1))/(cpn(inb-1)*(ph(inb &
-1)-ph(inb)))
bx = 0.1*ment(inb, inb)*(qent(inb,inb)-rr(inb))/(ph(inb)-ph(inb+1))
fr(inb) = fr(inb) - bx
fr(inb-1) = fr(inb-1) + bx*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph(inb))
cx = 0.1*ment(inb, inb)*(uent(inb,inb)-u(inb))/(ph(inb)-ph(inb+1))
fu(inb) = fu(inb) - cx
fu(inb-1) = fu(inb-1) + cx*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph(inb))
dx = 0.1*ment(inb, inb)*(vent(inb,inb)-v(inb))/(ph(inb)-ph(inb+1))
fv(inb) = fv(inb) - dx
fv(inb-1) = fv(inb-1) + dx*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph(inb))
DO j = 1, ntra
ex = 0.1*ment(inb, inb)*(traent(inb,inb,j)-tra(inb,j))/ &
(ph(inb)-ph(inb+1))
ftra(inb, j) = ftra(inb, j) - ex
ftra(inb-1, j) = ftra(inb-1, j) + ex*(ph(inb)-ph(inb+1))/(ph(inb-1)-ph( &
inb))
END DO
! *** HOMOGINIZE TENDENCIES BELOW CLOUD BASE ***
asum = 0.0
bsum = 0.0
csum = 0.0
dsum = 0.0
DO i = 1, icb - 1
asum = asum + ft(i)*(ph(i)-ph(i+1))
bsum = bsum + fr(i)*(lv(i)+(cl-cpd)*(t(i)-t(1)))*(ph(i)-ph(i+1))
csum = csum + (lv(i)+(cl-cpd)*(t(i)-t(1)))*(ph(i)-ph(i+1))
dsum = dsum + t(i)*(ph(i)-ph(i+1))/th(i)
END DO
DO i = 1, icb - 1
ft(i) = asum*t(i)/(th(i)*dsum)
fr(i) = bsum/csum
END DO
! *** RESET COUNTER AND RETURN ***
sig(nd) = 2.0
DO i = 1, nd
upwd(i) = 0.0
dnwd(i) = 0.0
! sb dnwd0(i) = - mp(i)
END DO
DO i = 1, nl
dnwd0(i) = -mp(i)
END DO
DO i = nl + 1, nd
dnwd0(i) = 0.
END DO
DO i = icb, inb
upwd(i) = 0.0
dnwd(i) = 0.0
DO k = i, inb
up1 = 0.0
dn1 = 0.0
DO n = 1, i - 1
up1 = up1 + ment(n, k)
dn1 = dn1 - ment(k, n)
END DO
upwd(i) = upwd(i) + m(k) + up1
dnwd(i) = dnwd(i) + dn1
END DO
END DO
! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
! DETERMINATION DE LA VARIATION DE FLUX ASCENDANT ENTRE
! DEUX NIVEAU NON DILUE Mike
! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
! sb do i=1,ND
! sb Mike(i)=M(i)
! sb enddo
DO i = 1, nl
mike(i) = m(i)
END DO
DO i = nl + 1, nd
mike(i) = 0.
END DO
DO i = 1, nd
ma(i) = 0
END DO
! sb do i=1,nd
! sb do j=i,nd
! sb Ma(i)=Ma(i)+M(j)
! sb enddo
! sb enddo
DO i = 1, nl
DO j = i, nl
ma(i) = ma(i) + m(j)
END DO
END DO
DO i = nl + 1, nd
ma(i) = 0.
END DO
DO i = 1, icb - 1
ma(i) = 0
END DO
! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
! ICB REPRESENTE DE NIVEAU OU SE TROUVE LA
! BASE DU NUAGE , ET INB LE TOP DU NUAGE
! ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
DO i = 1, nd
mke(i) = upwd(i) + dnwd(i)
END DO
! *** Diagnose the in-cloud mixing ratio *** ! cld
! *** of condensed water *** ! cld
! ! cld
DO i = 1, nd ! cld
maa(i) = 0.0 ! cld
wa(i) = 0.0 ! cld
siga(i) = 0.0 ! cld
END DO ! cld
DO i = nk, inb ! cld
DO k = i + 1, inb + 1 ! cld
maa(i) = maa(i) + m(k) ! cld
END DO ! cld
END DO ! cld
DO i = icb, inb - 1 ! cld
axc(i) = 0. ! cld
DO j = icb, i ! cld
axc(i) = axc(i) + rd*(tvp(j)-tv(j))*(ph(j)-ph(j+1))/p(j) ! cld
END DO ! cld
IF (axc(i)>0.0) THEN ! cld
wa(i) = sqrt(2.*axc(i)) ! cld
END IF ! cld
END DO ! cld
DO i = 1, nl ! cld
IF (wa(i)>0.0) & ! cld
siga(i) = maa(i)/wa(i)*rd*tvp(i)/p(i)/100./deltac ! cld
siga(i) = min(siga(i), 1.0) ! cld
qcondc(i) = siga(i)*clw(i)*(1.-ep(i)) & ! cld
+(1.-siga(i))*qcond(i) ! cld
END DO ! cld
! @$$cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
! @$$ call writeg1d(1,klev,ma,'ma ','ma ')
! @$$ call writeg1d(1,klev,upwd,'upwd ','upwd ')
! @$$ call writeg1d(1,klev,dnwd,'dnwd ','dnwd ')
! @$$ call writeg1d(1,klev,dnwd0,'dnwd0 ','dnwd0 ')
! @$$ call writeg1d(1,klev,tvp,'tvp ','tvp ')
! @$$ call writeg1d(1,klev,tra(1:klev,3),'tra3 ','tra3 ')
! @$$ call writeg1d(1,klev,tra(1:klev,4),'tra4 ','tra4 ')
! @$$ call writeg1d(1,klev,tra(1:klev,5),'tra5 ','tra5 ')
! @$$ call writeg1d(1,klev,tra(1:klev,6),'tra6 ','tra6 ')
! @$$ call writeg1d(1,klev,tra(1:klev,7),'tra7 ','tra7 ')
! @$$ call writeg1d(1,klev,tra(1:klev,8),'tra8 ','tra8 ')
! @$$ call writeg1d(1,klev,tra(1:klev,9),'tra9 ','tra9 ')
! @$$ call writeg1d(1,klev,tra(1:klev,10),'tra10','tra10')
! @$$ call writeg1d(1,klev,tra(1:klev,11),'tra11','tra11')
! @$$ call writeg1d(1,klev,tra(1:klev,12),'tra12','tra12')
! @$$ call writeg1d(1,klev,tra(1:klev,13),'tra13','tra13')
! @$$ call writeg1d(1,klev,tra(1:klev,14),'tra14','tra14')
! @$$ call writeg1d(1,klev,tra(1:klev,15),'tra15','tra15')
! @$$ call writeg1d(1,klev,tra(1:klev,16),'tra16','tra16')
! @$$ call writeg1d(1,klev,tra(1:klev,17),'tra17','tra17')
! @$$ call writeg1d(1,klev,tra(1:klev,18),'tra18','tra18')
! @$$ call writeg1d(1,klev,tra(1:klev,19),'tra19','tra19')
! @$$ call writeg1d(1,klev,tra(1:klev,20),'tra20','tra20 ')
! @$$ call writeg1d(1,klev,trap(1:klev,1),'trp1','trp1')
! @$$ call writeg1d(1,klev,trap(1:klev,2),'trp2','trp2')
! @$$ call writeg1d(1,klev,trap(1:klev,3),'trp3','trp3')
! @$$ call writeg1d(1,klev,trap(1:klev,4),'trp4','trp4')
! @$$ call writeg1d(1,klev,trap(1:klev,5),'trp5','trp5')
! @$$ call writeg1d(1,klev,trap(1:klev,10),'trp10','trp10')
! @$$ call writeg1d(1,klev,trap(1:klev,12),'trp12','trp12')
! @$$ call writeg1d(1,klev,trap(1:klev,15),'trp15','trp15')
! @$$ call writeg1d(1,klev,trap(1:klev,20),'trp20','trp20')
! @$$ call writeg1d(1,klev,ftra(1:klev,1),'ftr1 ','ftr1 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,2),'ftr2 ','ftr2 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,3),'ftr3 ','ftr3 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,4),'ftr4 ','ftr4 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,5),'ftr5 ','ftr5 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,6),'ftr6 ','ftr6 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,7),'ftr7 ','ftr7 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,8),'ftr8 ','ftr8 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,9),'ftr9 ','ftr9 ')
! @$$ call writeg1d(1,klev,ftra(1:klev,10),'ftr10','ftr10')
! @$$ call writeg1d(1,klev,ftra(1:klev,11),'ftr11','ftr11')
! @$$ call writeg1d(1,klev,ftra(1:klev,12),'ftr12','ftr12')
! @$$ call writeg1d(1,klev,ftra(1:klev,13),'ftr13','ftr13')
! @$$ call writeg1d(1,klev,ftra(1:klev,14),'ftr14','ftr14')
! @$$ call writeg1d(1,klev,ftra(1:klev,15),'ftr15','ftr15')
! @$$ call writeg1d(1,klev,ftra(1:klev,16),'ftr16','ftr16')
! @$$ call writeg1d(1,klev,ftra(1:klev,17),'ftr17','ftr17')
! @$$ call writeg1d(1,klev,ftra(1:klev,18),'ftr18','ftr18')
! @$$ call writeg1d(1,klev,ftra(1:klev,19),'ftr19','ftr19')
! @$$ call writeg1d(1,klev,ftra(1:klev,20),'ftr20','ftr20 ')
! @$$ call writeg1d(1,klev,mp,'mp ','mp ')
! @$$ call writeg1d(1,klev,Mke,'Mke ','Mke ')
! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
RETURN
END SUBROUTINE convect3
! ---------------------------------------------------------------------------
|